i2c-parport: Various cleanups
* Fix white space.
* Rename labels to something meaningful.
* Prefix defines with PORT_ to avoid collision with macros from
<linux/parport.h>.
* Add const markers where possible.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
diff --git a/drivers/i2c/busses/i2c-parport-light.c b/drivers/i2c/busses/i2c-parport-light.c
index fc5fbd1..4b95f7a 100644
--- a/drivers/i2c/busses/i2c-parport-light.c
+++ b/drivers/i2c/busses/i2c-parport-light.c
@@ -2,13 +2,13 @@
* i2c-parport-light.c I2C bus over parallel port *
* ------------------------------------------------------------------------ *
Copyright (C) 2003-2010 Jean Delvare <khali@linux-fr.org>
-
+
Based on older i2c-velleman.c driver
Copyright (C) 1995-2000 Simon G. Vogl
With some changes from:
Frodo Looijaard <frodol@dds.nl>
Kyösti Mälkki <kmalkki@cc.hut.fi>
-
+
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
@@ -114,7 +114,7 @@
.getscl = parport_getscl,
.udelay = 50,
.timeout = HZ,
-};
+};
/* ----- Driver registration ---------------------------------------------- */
@@ -132,7 +132,7 @@
static struct i2c_client *ara;
static struct lineop parport_ctrl_irq = {
.val = (1 << 4),
- .port = CTRL,
+ .port = PORT_CTRL,
};
static int __devinit i2c_parport_probe(struct platform_device *pdev)
@@ -245,7 +245,7 @@
if (irq != 0)
pr_info(DRVNAME ": using irq %d\n", irq);
- if (!adapter_parm[type].getscl.val)
+ if (!adapter_parm[type].getscl.val)
parport_algo_data.getscl = NULL;
/* Sets global pdev as a side effect */
diff --git a/drivers/i2c/busses/i2c-parport.c b/drivers/i2c/busses/i2c-parport.c
index 2dbba16..2456568 100644
--- a/drivers/i2c/busses/i2c-parport.c
+++ b/drivers/i2c/busses/i2c-parport.c
@@ -2,13 +2,13 @@
* i2c-parport.c I2C bus over parallel port *
* ------------------------------------------------------------------------ *
Copyright (C) 2003-2011 Jean Delvare <khali@linux-fr.org>
-
+
Based on older i2c-philips-par.c driver
Copyright (C) 1995-2000 Simon G. Vogl
With some changes from:
Frodo Looijaard <frodol@dds.nl>
Kyösti Mälkki <kmalkki@cc.hut.fi>
-
+
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
@@ -78,13 +78,13 @@
return parport_read_control(p);
}
-static void (*port_write[])(struct parport *, unsigned char) = {
+static void (* const port_write[])(struct parport *, unsigned char) = {
port_write_data,
NULL,
port_write_control,
};
-static unsigned char (*port_read[])(struct parport *) = {
+static unsigned char (* const port_read[])(struct parport *) = {
port_read_data,
port_read_status,
port_read_control,
@@ -147,7 +147,7 @@
.getscl = parport_getscl,
.udelay = 10, /* ~50 kbps */
.timeout = HZ,
-};
+};
/* ----- I2c and parallel port call-back functions and structures --------- */
@@ -164,10 +164,10 @@
"SMBus alert received but no ARA client!\n");
}
-static void i2c_parport_attach (struct parport *port)
+static void i2c_parport_attach(struct parport *port)
{
struct i2c_par *adapter;
-
+
adapter = kzalloc(sizeof(struct i2c_par), GFP_KERNEL);
if (adapter == NULL) {
printk(KERN_ERR "i2c-parport: Failed to kzalloc\n");
@@ -180,7 +180,7 @@
NULL, NULL, i2c_parport_irq, PARPORT_FLAG_EXCL, adapter);
if (!adapter->pdev) {
printk(KERN_ERR "i2c-parport: Unable to register with parport\n");
- goto ERROR0;
+ goto err_free;
}
/* Fill the rest of the structure */
@@ -200,7 +200,7 @@
if (parport_claim_or_block(adapter->pdev) < 0) {
printk(KERN_ERR "i2c-parport: Could not claim parallel port\n");
- goto ERROR1;
+ goto err_unregister;
}
/* Reset hardware to a sane state (SCL and SDA high) */
@@ -215,7 +215,7 @@
if (i2c_bit_add_bus(&adapter->adapter) < 0) {
printk(KERN_ERR "i2c-parport: Unable to register with I2C\n");
- goto ERROR1;
+ goto err_unregister;
}
/* Setup SMBus alert if supported */
@@ -234,16 +234,16 @@
mutex_lock(&adapter_list_lock);
list_add_tail(&adapter->node, &adapter_list);
mutex_unlock(&adapter_list_lock);
- return;
+ return;
-ERROR1:
+ err_unregister:
parport_release(adapter->pdev);
parport_unregister_device(adapter->pdev);
-ERROR0:
+ err_free:
kfree(adapter);
}
-static void i2c_parport_detach (struct parport *port)
+static void i2c_parport_detach(struct parport *port)
{
struct i2c_par *adapter, *_n;
@@ -260,7 +260,7 @@
/* Un-init if needed (power off...) */
if (adapter_parm[type].init.val)
line_set(port, 0, &adapter_parm[type].init);
-
+
parport_release(adapter->pdev);
parport_unregister_device(adapter->pdev);
list_del(&adapter->node);
diff --git a/drivers/i2c/busses/i2c-parport.h b/drivers/i2c/busses/i2c-parport.h
index a9f6681..3fe6523 100644
--- a/drivers/i2c/busses/i2c-parport.h
+++ b/drivers/i2c/busses/i2c-parport.h
@@ -2,7 +2,7 @@
* i2c-parport.h I2C bus over parallel port *
* ------------------------------------------------------------------------ *
Copyright (C) 2003-2010 Jean Delvare <khali@linux-fr.org>
-
+
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
@@ -18,13 +18,9 @@
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
* ------------------------------------------------------------------------ */
-#ifdef DATA
-#undef DATA
-#endif
-
-#define DATA 0
-#define STAT 1
-#define CTRL 2
+#define PORT_DATA 0
+#define PORT_STAT 1
+#define PORT_CTRL 2
struct lineop {
u8 val;
@@ -41,61 +37,61 @@
unsigned int smbus_alert:1;
};
-static struct adapter_parm adapter_parm[] = {
+static const struct adapter_parm adapter_parm[] = {
/* type 0: Philips adapter */
{
- .setsda = { 0x80, DATA, 1 },
- .setscl = { 0x08, CTRL, 0 },
- .getsda = { 0x80, STAT, 0 },
- .getscl = { 0x08, STAT, 0 },
+ .setsda = { 0x80, PORT_DATA, 1 },
+ .setscl = { 0x08, PORT_CTRL, 0 },
+ .getsda = { 0x80, PORT_STAT, 0 },
+ .getscl = { 0x08, PORT_STAT, 0 },
},
/* type 1: home brew teletext adapter */
{
- .setsda = { 0x02, DATA, 0 },
- .setscl = { 0x01, DATA, 0 },
- .getsda = { 0x80, STAT, 1 },
+ .setsda = { 0x02, PORT_DATA, 0 },
+ .setscl = { 0x01, PORT_DATA, 0 },
+ .getsda = { 0x80, PORT_STAT, 1 },
},
/* type 2: Velleman K8000 adapter */
{
- .setsda = { 0x02, CTRL, 1 },
- .setscl = { 0x08, CTRL, 1 },
- .getsda = { 0x10, STAT, 0 },
+ .setsda = { 0x02, PORT_CTRL, 1 },
+ .setscl = { 0x08, PORT_CTRL, 1 },
+ .getsda = { 0x10, PORT_STAT, 0 },
},
/* type 3: ELV adapter */
{
- .setsda = { 0x02, DATA, 1 },
- .setscl = { 0x01, DATA, 1 },
- .getsda = { 0x40, STAT, 1 },
- .getscl = { 0x08, STAT, 1 },
+ .setsda = { 0x02, PORT_DATA, 1 },
+ .setscl = { 0x01, PORT_DATA, 1 },
+ .getsda = { 0x40, PORT_STAT, 1 },
+ .getscl = { 0x08, PORT_STAT, 1 },
},
/* type 4: ADM1032 evaluation board */
{
- .setsda = { 0x02, DATA, 1 },
- .setscl = { 0x01, DATA, 1 },
- .getsda = { 0x10, STAT, 1 },
- .init = { 0xf0, DATA, 0 },
+ .setsda = { 0x02, PORT_DATA, 1 },
+ .setscl = { 0x01, PORT_DATA, 1 },
+ .getsda = { 0x10, PORT_STAT, 1 },
+ .init = { 0xf0, PORT_DATA, 0 },
.smbus_alert = 1,
},
/* type 5: ADM1025, ADM1030 and ADM1031 evaluation boards */
{
- .setsda = { 0x02, DATA, 1 },
- .setscl = { 0x01, DATA, 1 },
- .getsda = { 0x10, STAT, 1 },
+ .setsda = { 0x02, PORT_DATA, 1 },
+ .setscl = { 0x01, PORT_DATA, 1 },
+ .getsda = { 0x10, PORT_STAT, 1 },
},
/* type 6: Barco LPT->DVI (K5800236) adapter */
{
- .setsda = { 0x02, DATA, 1 },
- .setscl = { 0x01, DATA, 1 },
- .getsda = { 0x20, STAT, 0 },
- .getscl = { 0x40, STAT, 0 },
- .init = { 0xfc, DATA, 0 },
+ .setsda = { 0x02, PORT_DATA, 1 },
+ .setscl = { 0x01, PORT_DATA, 1 },
+ .getsda = { 0x20, PORT_STAT, 0 },
+ .getscl = { 0x40, PORT_STAT, 0 },
+ .init = { 0xfc, PORT_DATA, 0 },
},
/* type 7: One For All JP1 parallel port adapter */
{
- .setsda = { 0x01, DATA, 0 },
- .setscl = { 0x02, DATA, 0 },
- .getsda = { 0x80, STAT, 1 },
- .init = { 0x04, DATA, 1 },
+ .setsda = { 0x01, PORT_DATA, 0 },
+ .setscl = { 0x02, PORT_DATA, 0 },
+ .getsda = { 0x80, PORT_STAT, 1 },
+ .init = { 0x04, PORT_DATA, 1 },
},
};