| /* |
| * dv1394.c - DV input/output over IEEE 1394 on OHCI chips |
| * Copyright (C)2001 Daniel Maas <dmaas@dcine.com> |
| * receive by Dan Dennedy <dan@dennedy.org> |
| * |
| * based on: |
| * video1394.c - video driver for OHCI 1394 boards |
| * Copyright (C)1999,2000 Sebastien Rougeaux <sebastien.rougeaux@anu.edu.au> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software Foundation, |
| * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. |
| */ |
| |
| /* |
| OVERVIEW |
| |
| I designed dv1394 as a "pipe" that you can use to shoot DV onto a |
| FireWire bus. In transmission mode, dv1394 does the following: |
| |
| 1. accepts contiguous frames of DV data from user-space, via write() |
| or mmap() (see dv1394.h for the complete API) |
| 2. wraps IEC 61883 packets around the DV data, inserting |
| empty synchronization packets as necessary |
| 3. assigns accurate SYT timestamps to the outgoing packets |
| 4. shoots them out using the OHCI card's IT DMA engine |
| |
| Thanks to Dan Dennedy, we now have a receive mode that does the following: |
| |
| 1. accepts raw IEC 61883 packets from the OHCI card |
| 2. re-assembles the DV data payloads into contiguous frames, |
| discarding empty packets |
| 3. sends the DV data to user-space via read() or mmap() |
| */ |
| |
| /* |
| TODO: |
| |
| - tunable frame-drop behavior: either loop last frame, or halt transmission |
| |
| - use a scatter/gather buffer for DMA programs (f->descriptor_pool) |
| so that we don't rely on allocating 64KB of contiguous kernel memory |
| via pci_alloc_consistent() |
| |
| DONE: |
| - during reception, better handling of dropped frames and continuity errors |
| - during reception, prevent DMA from bypassing the irq tasklets |
| - reduce irq rate during reception (1/250 packets). |
| - add many more internal buffers during reception with scatter/gather dma. |
| - add dbc (continuity) checking on receive, increment status.dropped_frames |
| if not continuous. |
| - restart IT DMA after a bus reset |
| - safely obtain and release ISO Tx channels in cooperation with OHCI driver |
| - map received DIF blocks to their proper location in DV frame (ensure |
| recovery if dropped packet) |
| - handle bus resets gracefully (OHCI card seems to take care of this itself(!)) |
| - do not allow resizing the user_buf once allocated; eliminate nuke_buffer_mappings |
| - eliminated #ifdef DV1394_DEBUG_LEVEL by inventing macros debug_printk and irq_printk |
| - added wmb() and mb() to places where PCI read/write ordering needs to be enforced |
| - set video->id correctly |
| - store video_cards in an array indexed by OHCI card ID, rather than a list |
| - implement DMA context allocation to cooperate with other users of the OHCI |
| - fix all XXX showstoppers |
| - disable IR/IT DMA interrupts on shutdown |
| - flush pci writes to the card by issuing a read |
| - devfs and character device dispatching (* needs testing with Linux 2.2.x) |
| - switch over to the new kernel DMA API (pci_map_*()) (* needs testing on platforms with IOMMU!) |
| - keep all video_cards in a list (for open() via chardev), set file->private_data = video |
| - dv1394_poll should indicate POLLIN when receiving buffers are available |
| - add proc fs interface to set cip_n, cip_d, syt_offset, and video signal |
| - expose xmit and recv as separate devices (not exclusive) |
| - expose NTSC and PAL as separate devices (can be overridden) |
| |
| */ |
| |
| #include <linux/config.h> |
| #include <linux/kernel.h> |
| #include <linux/list.h> |
| #include <linux/slab.h> |
| #include <linux/interrupt.h> |
| #include <linux/wait.h> |
| #include <linux/errno.h> |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/pci.h> |
| #include <linux/fs.h> |
| #include <linux/poll.h> |
| #include <linux/smp_lock.h> |
| #include <linux/bitops.h> |
| #include <asm/byteorder.h> |
| #include <asm/atomic.h> |
| #include <asm/io.h> |
| #include <asm/uaccess.h> |
| #include <linux/delay.h> |
| #include <asm/pgtable.h> |
| #include <asm/page.h> |
| #include <linux/sched.h> |
| #include <linux/types.h> |
| #include <linux/vmalloc.h> |
| #include <linux/string.h> |
| #include <linux/ioctl32.h> |
| #include <linux/compat.h> |
| #include <linux/cdev.h> |
| |
| #include "ieee1394.h" |
| #include "ieee1394_types.h" |
| #include "nodemgr.h" |
| #include "hosts.h" |
| #include "ieee1394_core.h" |
| #include "highlevel.h" |
| #include "dv1394.h" |
| #include "dv1394-private.h" |
| |
| #include "ohci1394.h" |
| |
| #ifndef virt_to_page |
| #define virt_to_page(x) MAP_NR(x) |
| #endif |
| |
| #ifndef vmalloc_32 |
| #define vmalloc_32(x) vmalloc(x) |
| #endif |
| |
| |
| /* DEBUG LEVELS: |
| 0 - no debugging messages |
| 1 - some debugging messages, but none during DMA frame transmission |
| 2 - lots of messages, including during DMA frame transmission |
| (will cause undeflows if your machine is too slow!) |
| */ |
| |
| #define DV1394_DEBUG_LEVEL 0 |
| |
| /* for debugging use ONLY: allow more than one open() of the device */ |
| /* #define DV1394_ALLOW_MORE_THAN_ONE_OPEN 1 */ |
| |
| #if DV1394_DEBUG_LEVEL >= 2 |
| #define irq_printk( args... ) printk( args ) |
| #else |
| #define irq_printk( args... ) |
| #endif |
| |
| #if DV1394_DEBUG_LEVEL >= 1 |
| #define debug_printk( args... ) printk( args) |
| #else |
| #define debug_printk( args... ) |
| #endif |
| |
| /* issue a dummy PCI read to force the preceding write |
| to be posted to the PCI bus immediately */ |
| |
| static inline void flush_pci_write(struct ti_ohci *ohci) |
| { |
| mb(); |
| reg_read(ohci, OHCI1394_IsochronousCycleTimer); |
| } |
| |
| static void it_tasklet_func(unsigned long data); |
| static void ir_tasklet_func(unsigned long data); |
| |
| #ifdef CONFIG_COMPAT |
| static long dv1394_compat_ioctl(struct file *file, unsigned int cmd, |
| unsigned long arg); |
| #endif |
| |
| /* GLOBAL DATA */ |
| |
| /* list of all video_cards */ |
| static LIST_HEAD(dv1394_cards); |
| static DEFINE_SPINLOCK(dv1394_cards_lock); |
| |
| /* translate from a struct file* to the corresponding struct video_card* */ |
| |
| static inline struct video_card* file_to_video_card(struct file *file) |
| { |
| return (struct video_card*) file->private_data; |
| } |
| |
| /*** FRAME METHODS *********************************************************/ |
| |
| static void frame_reset(struct frame *f) |
| { |
| f->state = FRAME_CLEAR; |
| f->done = 0; |
| f->n_packets = 0; |
| f->frame_begin_timestamp = NULL; |
| f->assigned_timestamp = 0; |
| f->cip_syt1 = NULL; |
| f->cip_syt2 = NULL; |
| f->mid_frame_timestamp = NULL; |
| f->frame_end_timestamp = NULL; |
| f->frame_end_branch = NULL; |
| } |
| |
| static struct frame* frame_new(unsigned int frame_num, struct video_card *video) |
| { |
| struct frame *f = kmalloc(sizeof(*f), GFP_KERNEL); |
| if (!f) |
| return NULL; |
| |
| f->video = video; |
| f->frame_num = frame_num; |
| |
| f->header_pool = pci_alloc_consistent(f->video->ohci->dev, PAGE_SIZE, &f->header_pool_dma); |
| if (!f->header_pool) { |
| printk(KERN_ERR "dv1394: failed to allocate CIP header pool\n"); |
| kfree(f); |
| return NULL; |
| } |
| |
| debug_printk("dv1394: frame_new: allocated CIP header pool at virt 0x%08lx (contig) dma 0x%08lx size %ld\n", |
| (unsigned long) f->header_pool, (unsigned long) f->header_pool_dma, PAGE_SIZE); |
| |
| f->descriptor_pool_size = MAX_PACKETS * sizeof(struct DMA_descriptor_block); |
| /* make it an even # of pages */ |
| f->descriptor_pool_size += PAGE_SIZE - (f->descriptor_pool_size%PAGE_SIZE); |
| |
| f->descriptor_pool = pci_alloc_consistent(f->video->ohci->dev, |
| f->descriptor_pool_size, |
| &f->descriptor_pool_dma); |
| if (!f->descriptor_pool) { |
| pci_free_consistent(f->video->ohci->dev, PAGE_SIZE, f->header_pool, f->header_pool_dma); |
| kfree(f); |
| return NULL; |
| } |
| |
| debug_printk("dv1394: frame_new: allocated DMA program memory at virt 0x%08lx (contig) dma 0x%08lx size %ld\n", |
| (unsigned long) f->descriptor_pool, (unsigned long) f->descriptor_pool_dma, f->descriptor_pool_size); |
| |
| f->data = 0; |
| frame_reset(f); |
| |
| return f; |
| } |
| |
| static void frame_delete(struct frame *f) |
| { |
| pci_free_consistent(f->video->ohci->dev, PAGE_SIZE, f->header_pool, f->header_pool_dma); |
| pci_free_consistent(f->video->ohci->dev, f->descriptor_pool_size, f->descriptor_pool, f->descriptor_pool_dma); |
| kfree(f); |
| } |
| |
| |
| |
| |
| /* |
| frame_prepare() - build the DMA program for transmitting |
| |
| Frame_prepare() must be called OUTSIDE the video->spinlock. |
| However, frame_prepare() must still be serialized, so |
| it should be called WITH the video->sem taken. |
| */ |
| |
| static void frame_prepare(struct video_card *video, unsigned int this_frame) |
| { |
| struct frame *f = video->frames[this_frame]; |
| int last_frame; |
| |
| struct DMA_descriptor_block *block; |
| dma_addr_t block_dma; |
| struct CIP_header *cip; |
| dma_addr_t cip_dma; |
| |
| unsigned int n_descriptors, full_packets, packets_per_frame, payload_size; |
| |
| /* these flags denote packets that need special attention */ |
| int empty_packet, first_packet, last_packet, mid_packet; |
| |
| u32 *branch_address, *last_branch_address = NULL; |
| unsigned long data_p; |
| int first_packet_empty = 0; |
| u32 cycleTimer, ct_sec, ct_cyc, ct_off; |
| unsigned long irq_flags; |
| |
| irq_printk("frame_prepare( %d ) ---------------------\n", this_frame); |
| |
| full_packets = 0; |
| |
| |
| |
| if (video->pal_or_ntsc == DV1394_PAL) |
| packets_per_frame = DV1394_PAL_PACKETS_PER_FRAME; |
| else |
| packets_per_frame = DV1394_NTSC_PACKETS_PER_FRAME; |
| |
| while ( full_packets < packets_per_frame ) { |
| empty_packet = first_packet = last_packet = mid_packet = 0; |
| |
| data_p = f->data + full_packets * 480; |
| |
| /************************************************/ |
| /* allocate a descriptor block and a CIP header */ |
| /************************************************/ |
| |
| /* note: these should NOT cross a page boundary (DMA restriction) */ |
| |
| if (f->n_packets >= MAX_PACKETS) { |
| printk(KERN_ERR "dv1394: FATAL ERROR: max packet count exceeded\n"); |
| return; |
| } |
| |
| /* the block surely won't cross a page boundary, |
| since an even number of descriptor_blocks fit on a page */ |
| block = &(f->descriptor_pool[f->n_packets]); |
| |
| /* DMA address of the block = offset of block relative |
| to the kernel base address of the descriptor pool |
| + DMA base address of the descriptor pool */ |
| block_dma = ((unsigned long) block - (unsigned long) f->descriptor_pool) + f->descriptor_pool_dma; |
| |
| |
| /* the whole CIP pool fits on one page, so no worries about boundaries */ |
| if ( ((unsigned long) &(f->header_pool[f->n_packets]) - (unsigned long) f->header_pool) |
| > PAGE_SIZE) { |
| printk(KERN_ERR "dv1394: FATAL ERROR: no room to allocate CIP header\n"); |
| return; |
| } |
| |
| cip = &(f->header_pool[f->n_packets]); |
| |
| /* DMA address of the CIP header = offset of cip |
| relative to kernel base address of the header pool |
| + DMA base address of the header pool */ |
| cip_dma = (unsigned long) cip % PAGE_SIZE + f->header_pool_dma; |
| |
| /* is this an empty packet? */ |
| |
| if (video->cip_accum > (video->cip_d - video->cip_n)) { |
| empty_packet = 1; |
| payload_size = 8; |
| video->cip_accum -= (video->cip_d - video->cip_n); |
| } else { |
| payload_size = 488; |
| video->cip_accum += video->cip_n; |
| } |
| |
| /* there are three important packets each frame: |
| |
| the first packet in the frame - we ask the card to record the timestamp when |
| this packet is actually sent, so we can monitor |
| how accurate our timestamps are. Also, the first |
| packet serves as a semaphore to let us know that |
| it's OK to free the *previous* frame's DMA buffer |
| |
| the last packet in the frame - this packet is used to detect buffer underflows. |
| if this is the last ready frame, the last DMA block |
| will have a branch back to the beginning of the frame |
| (so that the card will re-send the frame on underflow). |
| if this branch gets taken, we know that at least one |
| frame has been dropped. When the next frame is ready, |
| the branch is pointed to its first packet, and the |
| semaphore is disabled. |
| |
| a "mid" packet slightly before the end of the frame - this packet should trigger |
| an interrupt so we can go and assign a timestamp to the first packet |
| in the next frame. We don't use the very last packet in the frame |
| for this purpose, because that would leave very little time to set |
| the timestamp before DMA starts on the next frame. |
| */ |
| |
| if (f->n_packets == 0) { |
| first_packet = 1; |
| } else if ( full_packets == (packets_per_frame-1) ) { |
| last_packet = 1; |
| } else if (f->n_packets == packets_per_frame) { |
| mid_packet = 1; |
| } |
| |
| |
| /********************/ |
| /* setup CIP header */ |
| /********************/ |
| |
| /* the timestamp will be written later from the |
| mid-frame interrupt handler. For now we just |
| store the address of the CIP header(s) that |
| need a timestamp. */ |
| |
| /* first packet in the frame needs a timestamp */ |
| if (first_packet) { |
| f->cip_syt1 = cip; |
| if (empty_packet) |
| first_packet_empty = 1; |
| |
| } else if (first_packet_empty && (f->n_packets == 1) ) { |
| /* if the first packet was empty, the second |
| packet's CIP header also needs a timestamp */ |
| f->cip_syt2 = cip; |
| } |
| |
| fill_cip_header(cip, |
| /* the node ID number of the OHCI card */ |
| reg_read(video->ohci, OHCI1394_NodeID) & 0x3F, |
| video->continuity_counter, |
| video->pal_or_ntsc, |
| 0xFFFF /* the timestamp is filled in later */); |
| |
| /* advance counter, only for full packets */ |
| if ( ! empty_packet ) |
| video->continuity_counter++; |
| |
| /******************************/ |
| /* setup DMA descriptor block */ |
| /******************************/ |
| |
| /* first descriptor - OUTPUT_MORE_IMMEDIATE, for the controller's IT header */ |
| fill_output_more_immediate( &(block->u.out.omi), 1, video->channel, 0, payload_size); |
| |
| if (empty_packet) { |
| /* second descriptor - OUTPUT_LAST for CIP header */ |
| fill_output_last( &(block->u.out.u.empty.ol), |
| |
| /* want completion status on all interesting packets */ |
| (first_packet || mid_packet || last_packet) ? 1 : 0, |
| |
| /* want interrupts on all interesting packets */ |
| (first_packet || mid_packet || last_packet) ? 1 : 0, |
| |
| sizeof(struct CIP_header), /* data size */ |
| cip_dma); |
| |
| if (first_packet) |
| f->frame_begin_timestamp = &(block->u.out.u.empty.ol.q[3]); |
| else if (mid_packet) |
| f->mid_frame_timestamp = &(block->u.out.u.empty.ol.q[3]); |
| else if (last_packet) { |
| f->frame_end_timestamp = &(block->u.out.u.empty.ol.q[3]); |
| f->frame_end_branch = &(block->u.out.u.empty.ol.q[2]); |
| } |
| |
| branch_address = &(block->u.out.u.empty.ol.q[2]); |
| n_descriptors = 3; |
| if (first_packet) |
| f->first_n_descriptors = n_descriptors; |
| |
| } else { /* full packet */ |
| |
| /* second descriptor - OUTPUT_MORE for CIP header */ |
| fill_output_more( &(block->u.out.u.full.om), |
| sizeof(struct CIP_header), /* data size */ |
| cip_dma); |
| |
| |
| /* third (and possibly fourth) descriptor - for DV data */ |
| /* the 480-byte payload can cross a page boundary; if so, |
| we need to split it into two DMA descriptors */ |
| |
| /* does the 480-byte data payload cross a page boundary? */ |
| if ( (PAGE_SIZE- ((unsigned long)data_p % PAGE_SIZE) ) < 480 ) { |
| |
| /* page boundary crossed */ |
| |
| fill_output_more( &(block->u.out.u.full.u.cross.om), |
| /* data size - how much of data_p fits on the first page */ |
| PAGE_SIZE - (data_p % PAGE_SIZE), |
| |
| /* DMA address of data_p */ |
| dma_region_offset_to_bus(&video->dv_buf, |
| data_p - (unsigned long) video->dv_buf.kvirt)); |
| |
| fill_output_last( &(block->u.out.u.full.u.cross.ol), |
| |
| /* want completion status on all interesting packets */ |
| (first_packet || mid_packet || last_packet) ? 1 : 0, |
| |
| /* want interrupt on all interesting packets */ |
| (first_packet || mid_packet || last_packet) ? 1 : 0, |
| |
| /* data size - remaining portion of data_p */ |
| 480 - (PAGE_SIZE - (data_p % PAGE_SIZE)), |
| |
| /* DMA address of data_p + PAGE_SIZE - (data_p % PAGE_SIZE) */ |
| dma_region_offset_to_bus(&video->dv_buf, |
| data_p + PAGE_SIZE - (data_p % PAGE_SIZE) - (unsigned long) video->dv_buf.kvirt)); |
| |
| if (first_packet) |
| f->frame_begin_timestamp = &(block->u.out.u.full.u.cross.ol.q[3]); |
| else if (mid_packet) |
| f->mid_frame_timestamp = &(block->u.out.u.full.u.cross.ol.q[3]); |
| else if (last_packet) { |
| f->frame_end_timestamp = &(block->u.out.u.full.u.cross.ol.q[3]); |
| f->frame_end_branch = &(block->u.out.u.full.u.cross.ol.q[2]); |
| } |
| |
| branch_address = &(block->u.out.u.full.u.cross.ol.q[2]); |
| |
| n_descriptors = 5; |
| if (first_packet) |
| f->first_n_descriptors = n_descriptors; |
| |
| full_packets++; |
| |
| } else { |
| /* fits on one page */ |
| |
| fill_output_last( &(block->u.out.u.full.u.nocross.ol), |
| |
| /* want completion status on all interesting packets */ |
| (first_packet || mid_packet || last_packet) ? 1 : 0, |
| |
| /* want interrupt on all interesting packets */ |
| (first_packet || mid_packet || last_packet) ? 1 : 0, |
| |
| 480, /* data size (480 bytes of DV data) */ |
| |
| |
| /* DMA address of data_p */ |
| dma_region_offset_to_bus(&video->dv_buf, |
| data_p - (unsigned long) video->dv_buf.kvirt)); |
| |
| if (first_packet) |
| f->frame_begin_timestamp = &(block->u.out.u.full.u.nocross.ol.q[3]); |
| else if (mid_packet) |
| f->mid_frame_timestamp = &(block->u.out.u.full.u.nocross.ol.q[3]); |
| else if (last_packet) { |
| f->frame_end_timestamp = &(block->u.out.u.full.u.nocross.ol.q[3]); |
| f->frame_end_branch = &(block->u.out.u.full.u.nocross.ol.q[2]); |
| } |
| |
| branch_address = &(block->u.out.u.full.u.nocross.ol.q[2]); |
| |
| n_descriptors = 4; |
| if (first_packet) |
| f->first_n_descriptors = n_descriptors; |
| |
| full_packets++; |
| } |
| } |
| |
| /* link this descriptor block into the DMA program by filling in |
| the branch address of the previous block */ |
| |
| /* note: we are not linked into the active DMA chain yet */ |
| |
| if (last_branch_address) { |
| *(last_branch_address) = cpu_to_le32(block_dma | n_descriptors); |
| } |
| |
| last_branch_address = branch_address; |
| |
| |
| f->n_packets++; |
| |
| } |
| |
| /* when we first assemble a new frame, set the final branch |
| to loop back up to the top */ |
| *(f->frame_end_branch) = cpu_to_le32(f->descriptor_pool_dma | f->first_n_descriptors); |
| |
| /* make the latest version of this frame visible to the PCI card */ |
| dma_region_sync_for_device(&video->dv_buf, f->data - (unsigned long) video->dv_buf.kvirt, video->frame_size); |
| |
| /* lock against DMA interrupt */ |
| spin_lock_irqsave(&video->spinlock, irq_flags); |
| |
| f->state = FRAME_READY; |
| |
| video->n_clear_frames--; |
| |
| last_frame = video->first_clear_frame - 1; |
| if (last_frame == -1) |
| last_frame = video->n_frames-1; |
| |
| video->first_clear_frame = (video->first_clear_frame + 1) % video->n_frames; |
| |
| irq_printk(" frame %d prepared, active_frame = %d, n_clear_frames = %d, first_clear_frame = %d\n last=%d\n", |
| this_frame, video->active_frame, video->n_clear_frames, video->first_clear_frame, last_frame); |
| |
| irq_printk(" begin_ts %08lx mid_ts %08lx end_ts %08lx end_br %08lx\n", |
| (unsigned long) f->frame_begin_timestamp, |
| (unsigned long) f->mid_frame_timestamp, |
| (unsigned long) f->frame_end_timestamp, |
| (unsigned long) f->frame_end_branch); |
| |
| if (video->active_frame != -1) { |
| |
| /* if DMA is already active, we are almost done */ |
| /* just link us onto the active DMA chain */ |
| if (video->frames[last_frame]->frame_end_branch) { |
| u32 temp; |
| |
| /* point the previous frame's tail to this frame's head */ |
| *(video->frames[last_frame]->frame_end_branch) = cpu_to_le32(f->descriptor_pool_dma | f->first_n_descriptors); |
| |
| /* this write MUST precede the next one, or we could silently drop frames */ |
| wmb(); |
| |
| /* disable the want_status semaphore on the last packet */ |
| temp = le32_to_cpu(*(video->frames[last_frame]->frame_end_branch - 2)); |
| temp &= 0xF7CFFFFF; |
| *(video->frames[last_frame]->frame_end_branch - 2) = cpu_to_le32(temp); |
| |
| /* flush these writes to memory ASAP */ |
| flush_pci_write(video->ohci); |
| |
| /* NOTE: |
| ideally the writes should be "atomic": if |
| the OHCI card reads the want_status flag in |
| between them, we'll falsely report a |
| dropped frame. Hopefully this window is too |
| small to really matter, and the consequence |
| is rather harmless. */ |
| |
| |
| irq_printk(" new frame %d linked onto DMA chain\n", this_frame); |
| |
| } else { |
| printk(KERN_ERR "dv1394: last frame not ready???\n"); |
| } |
| |
| } else { |
| |
| u32 transmit_sec, transmit_cyc; |
| u32 ts_cyc, ts_off; |
| |
| /* DMA is stopped, so this is the very first frame */ |
| video->active_frame = this_frame; |
| |
| /* set CommandPtr to address and size of first descriptor block */ |
| reg_write(video->ohci, video->ohci_IsoXmitCommandPtr, |
| video->frames[video->active_frame]->descriptor_pool_dma | |
| f->first_n_descriptors); |
| |
| /* assign a timestamp based on the current cycle time... |
| We'll tell the card to begin DMA 100 cycles from now, |
| and assign a timestamp 103 cycles from now */ |
| |
| cycleTimer = reg_read(video->ohci, OHCI1394_IsochronousCycleTimer); |
| |
| ct_sec = cycleTimer >> 25; |
| ct_cyc = (cycleTimer >> 12) & 0x1FFF; |
| ct_off = cycleTimer & 0xFFF; |
| |
| transmit_sec = ct_sec; |
| transmit_cyc = ct_cyc + 100; |
| |
| transmit_sec += transmit_cyc/8000; |
| transmit_cyc %= 8000; |
| |
| ts_off = ct_off; |
| ts_cyc = transmit_cyc + 3; |
| ts_cyc %= 8000; |
| |
| f->assigned_timestamp = (ts_cyc&0xF) << 12; |
| |
| /* now actually write the timestamp into the appropriate CIP headers */ |
| if (f->cip_syt1) { |
| f->cip_syt1->b[6] = f->assigned_timestamp >> 8; |
| f->cip_syt1->b[7] = f->assigned_timestamp & 0xFF; |
| } |
| if (f->cip_syt2) { |
| f->cip_syt2->b[6] = f->assigned_timestamp >> 8; |
| f->cip_syt2->b[7] = f->assigned_timestamp & 0xFF; |
| } |
| |
| /* --- start DMA --- */ |
| |
| /* clear all bits in ContextControl register */ |
| |
| reg_write(video->ohci, video->ohci_IsoXmitContextControlClear, 0xFFFFFFFF); |
| wmb(); |
| |
| /* the OHCI card has the ability to start ISO transmission on a |
| particular cycle (start-on-cycle). This way we can ensure that |
| the first DV frame will have an accurate timestamp. |
| |
| However, start-on-cycle only appears to work if the OHCI card |
| is cycle master! Since the consequences of messing up the first |
| timestamp are minimal*, just disable start-on-cycle for now. |
| |
| * my DV deck drops the first few frames before it "locks in;" |
| so the first frame having an incorrect timestamp is inconsequential. |
| */ |
| |
| #if 0 |
| reg_write(video->ohci, video->ohci_IsoXmitContextControlSet, |
| (1 << 31) /* enable start-on-cycle */ |
| | ( (transmit_sec & 0x3) << 29) |
| | (transmit_cyc << 16)); |
| wmb(); |
| #endif |
| |
| video->dma_running = 1; |
| |
| /* set the 'run' bit */ |
| reg_write(video->ohci, video->ohci_IsoXmitContextControlSet, 0x8000); |
| flush_pci_write(video->ohci); |
| |
| /* --- DMA should be running now --- */ |
| |
| debug_printk(" Cycle = %4u ContextControl = %08x CmdPtr = %08x\n", |
| (reg_read(video->ohci, OHCI1394_IsochronousCycleTimer) >> 12) & 0x1FFF, |
| reg_read(video->ohci, video->ohci_IsoXmitContextControlSet), |
| reg_read(video->ohci, video->ohci_IsoXmitCommandPtr)); |
| |
| debug_printk(" DMA start - current cycle %4u, transmit cycle %4u (%2u), assigning ts cycle %2u\n", |
| ct_cyc, transmit_cyc, transmit_cyc & 0xF, ts_cyc & 0xF); |
| |
| #if DV1394_DEBUG_LEVEL >= 2 |
| { |
| /* check if DMA is really running */ |
| int i = 0; |
| while (i < 20) { |
| mb(); |
| mdelay(1); |
| if (reg_read(video->ohci, video->ohci_IsoXmitContextControlSet) & (1 << 10)) { |
| printk("DMA ACTIVE after %d msec\n", i); |
| break; |
| } |
| i++; |
| } |
| |
| printk("set = %08x, cmdPtr = %08x\n", |
| reg_read(video->ohci, video->ohci_IsoXmitContextControlSet), |
| reg_read(video->ohci, video->ohci_IsoXmitCommandPtr) |
| ); |
| |
| if ( ! (reg_read(video->ohci, video->ohci_IsoXmitContextControlSet) & (1 << 10)) ) { |
| printk("DMA did NOT go active after 20ms, event = %x\n", |
| reg_read(video->ohci, video->ohci_IsoXmitContextControlSet) & 0x1F); |
| } else |
| printk("DMA is RUNNING!\n"); |
| } |
| #endif |
| |
| } |
| |
| |
| spin_unlock_irqrestore(&video->spinlock, irq_flags); |
| } |
| |
| |
| |
| /*** RECEIVE FUNCTIONS *****************************************************/ |
| |
| /* |
| frame method put_packet |
| |
| map and copy the packet data to its location in the frame |
| based upon DIF section and sequence |
| */ |
| |
| static void inline |
| frame_put_packet (struct frame *f, struct packet *p) |
| { |
| int section_type = p->data[0] >> 5; /* section type is in bits 5 - 7 */ |
| int dif_sequence = p->data[1] >> 4; /* dif sequence number is in bits 4 - 7 */ |
| int dif_block = p->data[2]; |
| |
| /* sanity check */ |
| if (dif_sequence > 11 || dif_block > 149) return; |
| |
| switch (section_type) { |
| case 0: /* 1 Header block */ |
| memcpy( (void *) f->data + dif_sequence * 150 * 80, p->data, 480); |
| break; |
| |
| case 1: /* 2 Subcode blocks */ |
| memcpy( (void *) f->data + dif_sequence * 150 * 80 + (1 + dif_block) * 80, p->data, 480); |
| break; |
| |
| case 2: /* 3 VAUX blocks */ |
| memcpy( (void *) f->data + dif_sequence * 150 * 80 + (3 + dif_block) * 80, p->data, 480); |
| break; |
| |
| case 3: /* 9 Audio blocks interleaved with video */ |
| memcpy( (void *) f->data + dif_sequence * 150 * 80 + (6 + dif_block * 16) * 80, p->data, 480); |
| break; |
| |
| case 4: /* 135 Video blocks interleaved with audio */ |
| memcpy( (void *) f->data + dif_sequence * 150 * 80 + (7 + (dif_block / 15) + dif_block) * 80, p->data, 480); |
| break; |
| |
| default: /* we can not handle any other data */ |
| break; |
| } |
| } |
| |
| |
| static void start_dma_receive(struct video_card *video) |
| { |
| if (video->first_run == 1) { |
| video->first_run = 0; |
| |
| /* start DMA once all of the frames are READY */ |
| video->n_clear_frames = 0; |
| video->first_clear_frame = -1; |
| video->current_packet = 0; |
| video->active_frame = 0; |
| |
| /* reset iso recv control register */ |
| reg_write(video->ohci, video->ohci_IsoRcvContextControlClear, 0xFFFFFFFF); |
| wmb(); |
| |
| /* clear bufferFill, set isochHeader and speed (0=100) */ |
| reg_write(video->ohci, video->ohci_IsoRcvContextControlSet, 0x40000000); |
| |
| /* match on all tags, listen on channel */ |
| reg_write(video->ohci, video->ohci_IsoRcvContextMatch, 0xf0000000 | video->channel); |
| |
| /* address and first descriptor block + Z=1 */ |
| reg_write(video->ohci, video->ohci_IsoRcvCommandPtr, |
| video->frames[0]->descriptor_pool_dma | 1); /* Z=1 */ |
| wmb(); |
| |
| video->dma_running = 1; |
| |
| /* run */ |
| reg_write(video->ohci, video->ohci_IsoRcvContextControlSet, 0x8000); |
| flush_pci_write(video->ohci); |
| |
| debug_printk("dv1394: DMA started\n"); |
| |
| #if DV1394_DEBUG_LEVEL >= 2 |
| { |
| int i; |
| |
| for (i = 0; i < 1000; ++i) { |
| mdelay(1); |
| if (reg_read(video->ohci, video->ohci_IsoRcvContextControlSet) & (1 << 10)) { |
| printk("DMA ACTIVE after %d msec\n", i); |
| break; |
| } |
| } |
| if ( reg_read(video->ohci, video->ohci_IsoRcvContextControlSet) & (1 << 11) ) { |
| printk("DEAD, event = %x\n", |
| reg_read(video->ohci, video->ohci_IsoRcvContextControlSet) & 0x1F); |
| } else |
| printk("RUNNING!\n"); |
| } |
| #endif |
| } else if ( reg_read(video->ohci, video->ohci_IsoRcvContextControlSet) & (1 << 11) ) { |
| debug_printk("DEAD, event = %x\n", |
| reg_read(video->ohci, video->ohci_IsoRcvContextControlSet) & 0x1F); |
| |
| /* wake */ |
| reg_write(video->ohci, video->ohci_IsoRcvContextControlSet, (1 << 12)); |
| } |
| } |
| |
| |
| /* |
| receive_packets() - build the DMA program for receiving |
| */ |
| |
| static void receive_packets(struct video_card *video) |
| { |
| struct DMA_descriptor_block *block = NULL; |
| dma_addr_t block_dma = 0; |
| struct packet *data = NULL; |
| dma_addr_t data_dma = 0; |
| u32 *last_branch_address = NULL; |
| unsigned long irq_flags; |
| int want_interrupt = 0; |
| struct frame *f = NULL; |
| int i, j; |
| |
| spin_lock_irqsave(&video->spinlock, irq_flags); |
| |
| for (j = 0; j < video->n_frames; j++) { |
| |
| /* connect frames */ |
| if (j > 0 && f != NULL && f->frame_end_branch != NULL) |
| *(f->frame_end_branch) = cpu_to_le32(video->frames[j]->descriptor_pool_dma | 1); /* set Z=1 */ |
| |
| f = video->frames[j]; |
| |
| for (i = 0; i < MAX_PACKETS; i++) { |
| /* locate a descriptor block and packet from the buffer */ |
| block = &(f->descriptor_pool[i]); |
| block_dma = ((unsigned long) block - (unsigned long) f->descriptor_pool) + f->descriptor_pool_dma; |
| |
| data = ((struct packet*)video->packet_buf.kvirt) + f->frame_num * MAX_PACKETS + i; |
| data_dma = dma_region_offset_to_bus( &video->packet_buf, |
| ((unsigned long) data - (unsigned long) video->packet_buf.kvirt) ); |
| |
| /* setup DMA descriptor block */ |
| want_interrupt = ((i % (MAX_PACKETS/2)) == 0 || i == (MAX_PACKETS-1)); |
| fill_input_last( &(block->u.in.il), want_interrupt, 512, data_dma); |
| |
| /* link descriptors */ |
| last_branch_address = f->frame_end_branch; |
| |
| if (last_branch_address != NULL) |
| *(last_branch_address) = cpu_to_le32(block_dma | 1); /* set Z=1 */ |
| |
| f->frame_end_branch = &(block->u.in.il.q[2]); |
| } |
| |
| } /* next j */ |
| |
| spin_unlock_irqrestore(&video->spinlock, irq_flags); |
| |
| } |
| |
| |
| |
| /*** MANAGEMENT FUNCTIONS **************************************************/ |
| |
| static int do_dv1394_init(struct video_card *video, struct dv1394_init *init) |
| { |
| unsigned long flags, new_buf_size; |
| int i; |
| u64 chan_mask; |
| int retval = -EINVAL; |
| |
| debug_printk("dv1394: initialising %d\n", video->id); |
| if (init->api_version != DV1394_API_VERSION) |
| return -EINVAL; |
| |
| /* first sanitize all the parameters */ |
| if ( (init->n_frames < 2) || (init->n_frames > DV1394_MAX_FRAMES) ) |
| return -EINVAL; |
| |
| if ( (init->format != DV1394_NTSC) && (init->format != DV1394_PAL) ) |
| return -EINVAL; |
| |
| if ( (init->syt_offset == 0) || (init->syt_offset > 50) ) |
| /* default SYT offset is 3 cycles */ |
| init->syt_offset = 3; |
| |
| if ( (init->channel > 63) || (init->channel < 0) ) |
| init->channel = 63; |
| |
| chan_mask = (u64)1 << init->channel; |
| |
| /* calculate what size DMA buffer is needed */ |
| if (init->format == DV1394_NTSC) |
| new_buf_size = DV1394_NTSC_FRAME_SIZE * init->n_frames; |
| else |
| new_buf_size = DV1394_PAL_FRAME_SIZE * init->n_frames; |
| |
| /* round up to PAGE_SIZE */ |
| if (new_buf_size % PAGE_SIZE) new_buf_size += PAGE_SIZE - (new_buf_size % PAGE_SIZE); |
| |
| /* don't allow the user to allocate the DMA buffer more than once */ |
| if (video->dv_buf.kvirt && video->dv_buf_size != new_buf_size) { |
| printk("dv1394: re-sizing the DMA buffer is not allowed\n"); |
| return -EINVAL; |
| } |
| |
| /* shutdown the card if it's currently active */ |
| /* (the card should not be reset if the parameters are screwy) */ |
| |
| do_dv1394_shutdown(video, 0); |
| |
| /* try to claim the ISO channel */ |
| spin_lock_irqsave(&video->ohci->IR_channel_lock, flags); |
| if (video->ohci->ISO_channel_usage & chan_mask) { |
| spin_unlock_irqrestore(&video->ohci->IR_channel_lock, flags); |
| retval = -EBUSY; |
| goto err; |
| } |
| video->ohci->ISO_channel_usage |= chan_mask; |
| spin_unlock_irqrestore(&video->ohci->IR_channel_lock, flags); |
| |
| video->channel = init->channel; |
| |
| /* initialize misc. fields of video */ |
| video->n_frames = init->n_frames; |
| video->pal_or_ntsc = init->format; |
| |
| video->cip_accum = 0; |
| video->continuity_counter = 0; |
| |
| video->active_frame = -1; |
| video->first_clear_frame = 0; |
| video->n_clear_frames = video->n_frames; |
| video->dropped_frames = 0; |
| |
| video->write_off = 0; |
| |
| video->first_run = 1; |
| video->current_packet = -1; |
| video->first_frame = 0; |
| |
| if (video->pal_or_ntsc == DV1394_NTSC) { |
| video->cip_n = init->cip_n != 0 ? init->cip_n : CIP_N_NTSC; |
| video->cip_d = init->cip_d != 0 ? init->cip_d : CIP_D_NTSC; |
| video->frame_size = DV1394_NTSC_FRAME_SIZE; |
| } else { |
| video->cip_n = init->cip_n != 0 ? init->cip_n : CIP_N_PAL; |
| video->cip_d = init->cip_d != 0 ? init->cip_d : CIP_D_PAL; |
| video->frame_size = DV1394_PAL_FRAME_SIZE; |
| } |
| |
| video->syt_offset = init->syt_offset; |
| |
| /* find and claim DMA contexts on the OHCI card */ |
| |
| if (video->ohci_it_ctx == -1) { |
| ohci1394_init_iso_tasklet(&video->it_tasklet, OHCI_ISO_TRANSMIT, |
| it_tasklet_func, (unsigned long) video); |
| |
| if (ohci1394_register_iso_tasklet(video->ohci, &video->it_tasklet) < 0) { |
| printk(KERN_ERR "dv1394: could not find an available IT DMA context\n"); |
| retval = -EBUSY; |
| goto err; |
| } |
| |
| video->ohci_it_ctx = video->it_tasklet.context; |
| debug_printk("dv1394: claimed IT DMA context %d\n", video->ohci_it_ctx); |
| } |
| |
| if (video->ohci_ir_ctx == -1) { |
| ohci1394_init_iso_tasklet(&video->ir_tasklet, OHCI_ISO_RECEIVE, |
| ir_tasklet_func, (unsigned long) video); |
| |
| if (ohci1394_register_iso_tasklet(video->ohci, &video->ir_tasklet) < 0) { |
| printk(KERN_ERR "dv1394: could not find an available IR DMA context\n"); |
| retval = -EBUSY; |
| goto err; |
| } |
| video->ohci_ir_ctx = video->ir_tasklet.context; |
| debug_printk("dv1394: claimed IR DMA context %d\n", video->ohci_ir_ctx); |
| } |
| |
| /* allocate struct frames */ |
| for (i = 0; i < init->n_frames; i++) { |
| video->frames[i] = frame_new(i, video); |
| |
| if (!video->frames[i]) { |
| printk(KERN_ERR "dv1394: Cannot allocate frame structs\n"); |
| retval = -ENOMEM; |
| goto err; |
| } |
| } |
| |
| if (!video->dv_buf.kvirt) { |
| /* allocate the ringbuffer */ |
| retval = dma_region_alloc(&video->dv_buf, new_buf_size, video->ohci->dev, PCI_DMA_TODEVICE); |
| if (retval) |
| goto err; |
| |
| video->dv_buf_size = new_buf_size; |
| |
| debug_printk("dv1394: Allocated %d frame buffers, total %u pages (%u DMA pages), %lu bytes\n", |
| video->n_frames, video->dv_buf.n_pages, |
| video->dv_buf.n_dma_pages, video->dv_buf_size); |
| } |
| |
| /* set up the frame->data pointers */ |
| for (i = 0; i < video->n_frames; i++) |
| video->frames[i]->data = (unsigned long) video->dv_buf.kvirt + i * video->frame_size; |
| |
| if (!video->packet_buf.kvirt) { |
| /* allocate packet buffer */ |
| video->packet_buf_size = sizeof(struct packet) * video->n_frames * MAX_PACKETS; |
| if (video->packet_buf_size % PAGE_SIZE) |
| video->packet_buf_size += PAGE_SIZE - (video->packet_buf_size % PAGE_SIZE); |
| |
| retval = dma_region_alloc(&video->packet_buf, video->packet_buf_size, |
| video->ohci->dev, PCI_DMA_FROMDEVICE); |
| if (retval) |
| goto err; |
| |
| debug_printk("dv1394: Allocated %d packets in buffer, total %u pages (%u DMA pages), %lu bytes\n", |
| video->n_frames*MAX_PACKETS, video->packet_buf.n_pages, |
| video->packet_buf.n_dma_pages, video->packet_buf_size); |
| } |
| |
| /* set up register offsets for IT context */ |
| /* IT DMA context registers are spaced 16 bytes apart */ |
| video->ohci_IsoXmitContextControlSet = OHCI1394_IsoXmitContextControlSet+16*video->ohci_it_ctx; |
| video->ohci_IsoXmitContextControlClear = OHCI1394_IsoXmitContextControlClear+16*video->ohci_it_ctx; |
| video->ohci_IsoXmitCommandPtr = OHCI1394_IsoXmitCommandPtr+16*video->ohci_it_ctx; |
| |
| /* enable interrupts for IT context */ |
| reg_write(video->ohci, OHCI1394_IsoXmitIntMaskSet, (1 << video->ohci_it_ctx)); |
| debug_printk("dv1394: interrupts enabled for IT context %d\n", video->ohci_it_ctx); |
| |
| /* set up register offsets for IR context */ |
| /* IR DMA context registers are spaced 32 bytes apart */ |
| video->ohci_IsoRcvContextControlSet = OHCI1394_IsoRcvContextControlSet+32*video->ohci_ir_ctx; |
| video->ohci_IsoRcvContextControlClear = OHCI1394_IsoRcvContextControlClear+32*video->ohci_ir_ctx; |
| video->ohci_IsoRcvCommandPtr = OHCI1394_IsoRcvCommandPtr+32*video->ohci_ir_ctx; |
| video->ohci_IsoRcvContextMatch = OHCI1394_IsoRcvContextMatch+32*video->ohci_ir_ctx; |
| |
| /* enable interrupts for IR context */ |
| reg_write(video->ohci, OHCI1394_IsoRecvIntMaskSet, (1 << video->ohci_ir_ctx) ); |
| debug_printk("dv1394: interrupts enabled for IR context %d\n", video->ohci_ir_ctx); |
| |
| return 0; |
| |
| err: |
| do_dv1394_shutdown(video, 1); |
| return retval; |
| } |
| |
| /* if the user doesn't bother to call ioctl(INIT) before starting |
| mmap() or read()/write(), just give him some default values */ |
| |
| static int do_dv1394_init_default(struct video_card *video) |
| { |
| struct dv1394_init init; |
| |
| init.api_version = DV1394_API_VERSION; |
| init.n_frames = DV1394_MAX_FRAMES / 4; |
| /* the following are now set via devfs */ |
| init.channel = video->channel; |
| init.format = video->pal_or_ntsc; |
| init.cip_n = video->cip_n; |
| init.cip_d = video->cip_d; |
| init.syt_offset = video->syt_offset; |
| |
| return do_dv1394_init(video, &init); |
| } |
| |
| /* do NOT call from interrupt context */ |
| static void stop_dma(struct video_card *video) |
| { |
| unsigned long flags; |
| int i; |
| |
| /* no interrupts */ |
| spin_lock_irqsave(&video->spinlock, flags); |
| |
| video->dma_running = 0; |
| |
| if ( (video->ohci_it_ctx == -1) && (video->ohci_ir_ctx == -1) ) |
| goto out; |
| |
| /* stop DMA if in progress */ |
| if ( (video->active_frame != -1) || |
| (reg_read(video->ohci, video->ohci_IsoXmitContextControlClear) & (1 << 10)) || |
| (reg_read(video->ohci, video->ohci_IsoRcvContextControlClear) & (1 << 10)) ) { |
| |
| /* clear the .run bits */ |
| reg_write(video->ohci, video->ohci_IsoXmitContextControlClear, (1 << 15)); |
| reg_write(video->ohci, video->ohci_IsoRcvContextControlClear, (1 << 15)); |
| flush_pci_write(video->ohci); |
| |
| video->active_frame = -1; |
| video->first_run = 1; |
| |
| /* wait until DMA really stops */ |
| i = 0; |
| while (i < 1000) { |
| |
| /* wait 0.1 millisecond */ |
| udelay(100); |
| |
| if ( (reg_read(video->ohci, video->ohci_IsoXmitContextControlClear) & (1 << 10)) || |
| (reg_read(video->ohci, video->ohci_IsoRcvContextControlClear) & (1 << 10)) ) { |
| /* still active */ |
| debug_printk("dv1394: stop_dma: DMA not stopped yet\n" ); |
| mb(); |
| } else { |
| debug_printk("dv1394: stop_dma: DMA stopped safely after %d ms\n", i/10); |
| break; |
| } |
| |
| i++; |
| } |
| |
| if (i == 1000) { |
| printk(KERN_ERR "dv1394: stop_dma: DMA still going after %d ms!\n", i/10); |
| } |
| } |
| else |
| debug_printk("dv1394: stop_dma: already stopped.\n"); |
| |
| out: |
| spin_unlock_irqrestore(&video->spinlock, flags); |
| } |
| |
| |
| |
| static void do_dv1394_shutdown(struct video_card *video, int free_dv_buf) |
| { |
| int i; |
| |
| debug_printk("dv1394: shutdown...\n"); |
| |
| /* stop DMA if in progress */ |
| stop_dma(video); |
| |
| /* release the DMA contexts */ |
| if (video->ohci_it_ctx != -1) { |
| video->ohci_IsoXmitContextControlSet = 0; |
| video->ohci_IsoXmitContextControlClear = 0; |
| video->ohci_IsoXmitCommandPtr = 0; |
| |
| /* disable interrupts for IT context */ |
| reg_write(video->ohci, OHCI1394_IsoXmitIntMaskClear, (1 << video->ohci_it_ctx)); |
| |
| /* remove tasklet */ |
| ohci1394_unregister_iso_tasklet(video->ohci, &video->it_tasklet); |
| debug_printk("dv1394: IT context %d released\n", video->ohci_it_ctx); |
| video->ohci_it_ctx = -1; |
| } |
| |
| if (video->ohci_ir_ctx != -1) { |
| video->ohci_IsoRcvContextControlSet = 0; |
| video->ohci_IsoRcvContextControlClear = 0; |
| video->ohci_IsoRcvCommandPtr = 0; |
| video->ohci_IsoRcvContextMatch = 0; |
| |
| /* disable interrupts for IR context */ |
| reg_write(video->ohci, OHCI1394_IsoRecvIntMaskClear, (1 << video->ohci_ir_ctx)); |
| |
| /* remove tasklet */ |
| ohci1394_unregister_iso_tasklet(video->ohci, &video->ir_tasklet); |
| debug_printk("dv1394: IR context %d released\n", video->ohci_ir_ctx); |
| video->ohci_ir_ctx = -1; |
| } |
| |
| /* release the ISO channel */ |
| if (video->channel != -1) { |
| u64 chan_mask; |
| unsigned long flags; |
| |
| chan_mask = (u64)1 << video->channel; |
| |
| spin_lock_irqsave(&video->ohci->IR_channel_lock, flags); |
| video->ohci->ISO_channel_usage &= ~(chan_mask); |
| spin_unlock_irqrestore(&video->ohci->IR_channel_lock, flags); |
| |
| video->channel = -1; |
| } |
| |
| /* free the frame structs */ |
| for (i = 0; i < DV1394_MAX_FRAMES; i++) { |
| if (video->frames[i]) |
| frame_delete(video->frames[i]); |
| video->frames[i] = NULL; |
| } |
| |
| video->n_frames = 0; |
| |
| /* we can't free the DMA buffer unless it is guaranteed that |
| no more user-space mappings exist */ |
| |
| if (free_dv_buf) { |
| dma_region_free(&video->dv_buf); |
| video->dv_buf_size = 0; |
| } |
| |
| /* free packet buffer */ |
| dma_region_free(&video->packet_buf); |
| video->packet_buf_size = 0; |
| |
| debug_printk("dv1394: shutdown OK\n"); |
| } |
| |
| /* |
| ********************************** |
| *** MMAP() THEORY OF OPERATION *** |
| ********************************** |
| |
| The ringbuffer cannot be re-allocated or freed while |
| a user program maintains a mapping of it. (note that a mapping |
| can persist even after the device fd is closed!) |
| |
| So, only let the user process allocate the DMA buffer once. |
| To resize or deallocate it, you must close the device file |
| and open it again. |
| |
| Previously Dan M. hacked out a scheme that allowed the DMA |
| buffer to change by forcefully unmapping it from the user's |
| address space. It was prone to error because it's very hard to |
| track all the places the buffer could have been mapped (we |
| would have had to walk the vma list of every process in the |
| system to be sure we found all the mappings!). Instead, we |
| force the user to choose one buffer size and stick with |
| it. This small sacrifice is worth the huge reduction in |
| error-prone code in dv1394. |
| */ |
| |
| static int dv1394_mmap(struct file *file, struct vm_area_struct *vma) |
| { |
| struct video_card *video = file_to_video_card(file); |
| int retval = -EINVAL; |
| |
| /* serialize mmap */ |
| down(&video->sem); |
| |
| if ( ! video_card_initialized(video) ) { |
| retval = do_dv1394_init_default(video); |
| if (retval) |
| goto out; |
| } |
| |
| retval = dma_region_mmap(&video->dv_buf, file, vma); |
| out: |
| up(&video->sem); |
| return retval; |
| } |
| |
| /*** DEVICE FILE INTERFACE *************************************************/ |
| |
| /* no need to serialize, multiple threads OK */ |
| static unsigned int dv1394_poll(struct file *file, struct poll_table_struct *wait) |
| { |
| struct video_card *video = file_to_video_card(file); |
| unsigned int mask = 0; |
| unsigned long flags; |
| |
| poll_wait(file, &video->waitq, wait); |
| |
| spin_lock_irqsave(&video->spinlock, flags); |
| if ( video->n_frames == 0 ) { |
| |
| } else if ( video->active_frame == -1 ) { |
| /* nothing going on */ |
| mask |= POLLOUT; |
| } else { |
| /* any clear/ready buffers? */ |
| if (video->n_clear_frames >0) |
| mask |= POLLOUT | POLLIN; |
| } |
| spin_unlock_irqrestore(&video->spinlock, flags); |
| |
| return mask; |
| } |
| |
| static int dv1394_fasync(int fd, struct file *file, int on) |
| { |
| /* I just copied this code verbatim from Alan Cox's mouse driver example |
| (Documentation/DocBook/) */ |
| |
| struct video_card *video = file_to_video_card(file); |
| |
| int retval = fasync_helper(fd, file, on, &video->fasync); |
| |
| if (retval < 0) |
| return retval; |
| return 0; |
| } |
| |
| static ssize_t dv1394_write(struct file *file, const char __user *buffer, size_t count, loff_t *ppos) |
| { |
| struct video_card *video = file_to_video_card(file); |
| DECLARE_WAITQUEUE(wait, current); |
| ssize_t ret; |
| size_t cnt; |
| unsigned long flags; |
| int target_frame; |
| |
| /* serialize this to prevent multi-threaded mayhem */ |
| if (file->f_flags & O_NONBLOCK) { |
| if (down_trylock(&video->sem)) |
| return -EAGAIN; |
| } else { |
| if (down_interruptible(&video->sem)) |
| return -ERESTARTSYS; |
| } |
| |
| if ( !video_card_initialized(video) ) { |
| ret = do_dv1394_init_default(video); |
| if (ret) { |
| up(&video->sem); |
| return ret; |
| } |
| } |
| |
| ret = 0; |
| add_wait_queue(&video->waitq, &wait); |
| |
| while (count > 0) { |
| |
| /* must set TASK_INTERRUPTIBLE *before* checking for free |
| buffers; otherwise we could miss a wakeup if the interrupt |
| fires between the check and the schedule() */ |
| |
| set_current_state(TASK_INTERRUPTIBLE); |
| |
| spin_lock_irqsave(&video->spinlock, flags); |
| |
| target_frame = video->first_clear_frame; |
| |
| spin_unlock_irqrestore(&video->spinlock, flags); |
| |
| if (video->frames[target_frame]->state == FRAME_CLEAR) { |
| |
| /* how much room is left in the target frame buffer */ |
| cnt = video->frame_size - (video->write_off - target_frame * video->frame_size); |
| |
| } else { |
| /* buffer is already used */ |
| cnt = 0; |
| } |
| |
| if (cnt > count) |
| cnt = count; |
| |
| if (cnt <= 0) { |
| /* no room left, gotta wait */ |
| if (file->f_flags & O_NONBLOCK) { |
| if (!ret) |
| ret = -EAGAIN; |
| break; |
| } |
| if (signal_pending(current)) { |
| if (!ret) |
| ret = -ERESTARTSYS; |
| break; |
| } |
| |
| schedule(); |
| |
| continue; /* start over from 'while(count > 0)...' */ |
| } |
| |
| if (copy_from_user(video->dv_buf.kvirt + video->write_off, buffer, cnt)) { |
| if (!ret) |
| ret = -EFAULT; |
| break; |
| } |
| |
| video->write_off = (video->write_off + cnt) % (video->n_frames * video->frame_size); |
| |
| count -= cnt; |
| buffer += cnt; |
| ret += cnt; |
| |
| if (video->write_off == video->frame_size * ((target_frame + 1) % video->n_frames)) |
| frame_prepare(video, target_frame); |
| } |
| |
| remove_wait_queue(&video->waitq, &wait); |
| set_current_state(TASK_RUNNING); |
| up(&video->sem); |
| return ret; |
| } |
| |
| |
| static ssize_t dv1394_read(struct file *file, char __user *buffer, size_t count, loff_t *ppos) |
| { |
| struct video_card *video = file_to_video_card(file); |
| DECLARE_WAITQUEUE(wait, current); |
| ssize_t ret; |
| size_t cnt; |
| unsigned long flags; |
| int target_frame; |
| |
| /* serialize this to prevent multi-threaded mayhem */ |
| if (file->f_flags & O_NONBLOCK) { |
| if (down_trylock(&video->sem)) |
| return -EAGAIN; |
| } else { |
| if (down_interruptible(&video->sem)) |
| return -ERESTARTSYS; |
| } |
| |
| if ( !video_card_initialized(video) ) { |
| ret = do_dv1394_init_default(video); |
| if (ret) { |
| up(&video->sem); |
| return ret; |
| } |
| video->continuity_counter = -1; |
| |
| receive_packets(video); |
| |
| start_dma_receive(video); |
| } |
| |
| ret = 0; |
| add_wait_queue(&video->waitq, &wait); |
| |
| while (count > 0) { |
| |
| /* must set TASK_INTERRUPTIBLE *before* checking for free |
| buffers; otherwise we could miss a wakeup if the interrupt |
| fires between the check and the schedule() */ |
| |
| set_current_state(TASK_INTERRUPTIBLE); |
| |
| spin_lock_irqsave(&video->spinlock, flags); |
| |
| target_frame = video->first_clear_frame; |
| |
| spin_unlock_irqrestore(&video->spinlock, flags); |
| |
| if (target_frame >= 0 && |
| video->n_clear_frames > 0 && |
| video->frames[target_frame]->state == FRAME_CLEAR) { |
| |
| /* how much room is left in the target frame buffer */ |
| cnt = video->frame_size - (video->write_off - target_frame * video->frame_size); |
| |
| } else { |
| /* buffer is already used */ |
| cnt = 0; |
| } |
| |
| if (cnt > count) |
| cnt = count; |
| |
| if (cnt <= 0) { |
| /* no room left, gotta wait */ |
| if (file->f_flags & O_NONBLOCK) { |
| if (!ret) |
| ret = -EAGAIN; |
| break; |
| } |
| if (signal_pending(current)) { |
| if (!ret) |
| ret = -ERESTARTSYS; |
| break; |
| } |
| |
| schedule(); |
| |
| continue; /* start over from 'while(count > 0)...' */ |
| } |
| |
| if (copy_to_user(buffer, video->dv_buf.kvirt + video->write_off, cnt)) { |
| if (!ret) |
| ret = -EFAULT; |
| break; |
| } |
| |
| video->write_off = (video->write_off + cnt) % (video->n_frames * video->frame_size); |
| |
| count -= cnt; |
| buffer += cnt; |
| ret += cnt; |
| |
| if (video->write_off == video->frame_size * ((target_frame + 1) % video->n_frames)) { |
| spin_lock_irqsave(&video->spinlock, flags); |
| video->n_clear_frames--; |
| video->first_clear_frame = (video->first_clear_frame + 1) % video->n_frames; |
| spin_unlock_irqrestore(&video->spinlock, flags); |
| } |
| } |
| |
| remove_wait_queue(&video->waitq, &wait); |
| set_current_state(TASK_RUNNING); |
| up(&video->sem); |
| return ret; |
| } |
| |
| |
| /*** DEVICE IOCTL INTERFACE ************************************************/ |
| |
| static long dv1394_ioctl(struct file *file, unsigned int cmd, unsigned long arg) |
| { |
| struct video_card *video; |
| unsigned long flags; |
| int ret = -EINVAL; |
| void __user *argp = (void __user *)arg; |
| |
| DECLARE_WAITQUEUE(wait, current); |
| |
| lock_kernel(); |
| video = file_to_video_card(file); |
| |
| /* serialize this to prevent multi-threaded mayhem */ |
| if (file->f_flags & O_NONBLOCK) { |
| if (down_trylock(&video->sem)) { |
| unlock_kernel(); |
| return -EAGAIN; |
| } |
| } else { |
| if (down_interruptible(&video->sem)) { |
| unlock_kernel(); |
| return -ERESTARTSYS; |
| } |
| } |
| |
| switch(cmd) |
| { |
| case DV1394_IOC_SUBMIT_FRAMES: { |
| unsigned int n_submit; |
| |
| if ( !video_card_initialized(video) ) { |
| ret = do_dv1394_init_default(video); |
| if (ret) |
| goto out; |
| } |
| |
| n_submit = (unsigned int) arg; |
| |
| if (n_submit > video->n_frames) { |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| while (n_submit > 0) { |
| |
| add_wait_queue(&video->waitq, &wait); |
| set_current_state(TASK_INTERRUPTIBLE); |
| |
| spin_lock_irqsave(&video->spinlock, flags); |
| |
| /* wait until video->first_clear_frame is really CLEAR */ |
| while (video->frames[video->first_clear_frame]->state != FRAME_CLEAR) { |
| |
| spin_unlock_irqrestore(&video->spinlock, flags); |
| |
| if (signal_pending(current)) { |
| remove_wait_queue(&video->waitq, &wait); |
| set_current_state(TASK_RUNNING); |
| ret = -EINTR; |
| goto out; |
| } |
| |
| schedule(); |
| set_current_state(TASK_INTERRUPTIBLE); |
| |
| spin_lock_irqsave(&video->spinlock, flags); |
| } |
| spin_unlock_irqrestore(&video->spinlock, flags); |
| |
| remove_wait_queue(&video->waitq, &wait); |
| set_current_state(TASK_RUNNING); |
| |
| frame_prepare(video, video->first_clear_frame); |
| |
| n_submit--; |
| } |
| |
| ret = 0; |
| break; |
| } |
| |
| case DV1394_IOC_WAIT_FRAMES: { |
| unsigned int n_wait; |
| |
| if ( !video_card_initialized(video) ) { |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| n_wait = (unsigned int) arg; |
| |
| /* since we re-run the last frame on underflow, we will |
| never actually have n_frames clear frames; at most only |
| n_frames - 1 */ |
| |
| if (n_wait > (video->n_frames-1) ) { |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| add_wait_queue(&video->waitq, &wait); |
| set_current_state(TASK_INTERRUPTIBLE); |
| |
| spin_lock_irqsave(&video->spinlock, flags); |
| |
| while (video->n_clear_frames < n_wait) { |
| |
| spin_unlock_irqrestore(&video->spinlock, flags); |
| |
| if (signal_pending(current)) { |
| remove_wait_queue(&video->waitq, &wait); |
| set_current_state(TASK_RUNNING); |
| ret = -EINTR; |
| goto out; |
| } |
| |
| schedule(); |
| set_current_state(TASK_INTERRUPTIBLE); |
| |
| spin_lock_irqsave(&video->spinlock, flags); |
| } |
| |
| spin_unlock_irqrestore(&video->spinlock, flags); |
| |
| remove_wait_queue(&video->waitq, &wait); |
| set_current_state(TASK_RUNNING); |
| ret = 0; |
| break; |
| } |
| |
| case DV1394_IOC_RECEIVE_FRAMES: { |
| unsigned int n_recv; |
| |
| if ( !video_card_initialized(video) ) { |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| n_recv = (unsigned int) arg; |
| |
| /* at least one frame must be active */ |
| if (n_recv > (video->n_frames-1) ) { |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| spin_lock_irqsave(&video->spinlock, flags); |
| |
| /* release the clear frames */ |
| video->n_clear_frames -= n_recv; |
| |
| /* advance the clear frame cursor */ |
| video->first_clear_frame = (video->first_clear_frame + n_recv) % video->n_frames; |
| |
| /* reset dropped_frames */ |
| video->dropped_frames = 0; |
| |
| spin_unlock_irqrestore(&video->spinlock, flags); |
| |
| ret = 0; |
| break; |
| } |
| |
| case DV1394_IOC_START_RECEIVE: { |
| if ( !video_card_initialized(video) ) { |
| ret = do_dv1394_init_default(video); |
| if (ret) |
| goto out; |
| } |
| |
| video->continuity_counter = -1; |
| |
| receive_packets(video); |
| |
| start_dma_receive(video); |
| |
| ret = 0; |
| break; |
| } |
| |
| case DV1394_IOC_INIT: { |
| struct dv1394_init init; |
| if (!argp) { |
| ret = do_dv1394_init_default(video); |
| } else { |
| if (copy_from_user(&init, argp, sizeof(init))) { |
| ret = -EFAULT; |
| goto out; |
| } |
| ret = do_dv1394_init(video, &init); |
| } |
| break; |
| } |
| |
| case DV1394_IOC_SHUTDOWN: |
| do_dv1394_shutdown(video, 0); |
| ret = 0; |
| break; |
| |
| |
| case DV1394_IOC_GET_STATUS: { |
| struct dv1394_status status; |
| |
| if ( !video_card_initialized(video) ) { |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| status.init.api_version = DV1394_API_VERSION; |
| status.init.channel = video->channel; |
| status.init.n_frames = video->n_frames; |
| status.init.format = video->pal_or_ntsc; |
| status.init.cip_n = video->cip_n; |
| status.init.cip_d = video->cip_d; |
| status.init.syt_offset = video->syt_offset; |
| |
| status.first_clear_frame = video->first_clear_frame; |
| |
| /* the rest of the fields need to be locked against the interrupt */ |
| spin_lock_irqsave(&video->spinlock, flags); |
| |
| status.active_frame = video->active_frame; |
| status.n_clear_frames = video->n_clear_frames; |
| |
| status.dropped_frames = video->dropped_frames; |
| |
| /* reset dropped_frames */ |
| video->dropped_frames = 0; |
| |
| spin_unlock_irqrestore(&video->spinlock, flags); |
| |
| if (copy_to_user(argp, &status, sizeof(status))) { |
| ret = -EFAULT; |
| goto out; |
| } |
| |
| ret = 0; |
| break; |
| } |
| |
| default: |
| break; |
| } |
| |
| out: |
| up(&video->sem); |
| unlock_kernel(); |
| return ret; |
| } |
| |
| /*** DEVICE FILE INTERFACE CONTINUED ***************************************/ |
| |
| static int dv1394_open(struct inode *inode, struct file *file) |
| { |
| struct video_card *video = NULL; |
| |
| /* if the device was opened through devfs, then file->private_data |
| has already been set to video by devfs */ |
| if (file->private_data) { |
| video = (struct video_card*) file->private_data; |
| |
| } else { |
| /* look up the card by ID */ |
| unsigned long flags; |
| |
| spin_lock_irqsave(&dv1394_cards_lock, flags); |
| if (!list_empty(&dv1394_cards)) { |
| struct video_card *p; |
| list_for_each_entry(p, &dv1394_cards, list) { |
| if ((p->id) == ieee1394_file_to_instance(file)) { |
| video = p; |
| break; |
| } |
| } |
| } |
| spin_unlock_irqrestore(&dv1394_cards_lock, flags); |
| |
| if (!video) { |
| debug_printk("dv1394: OHCI card %d not found", ieee1394_file_to_instance(file)); |
| return -ENODEV; |
| } |
| |
| file->private_data = (void*) video; |
| } |
| |
| #ifndef DV1394_ALLOW_MORE_THAN_ONE_OPEN |
| |
| if ( test_and_set_bit(0, &video->open) ) { |
| /* video is already open by someone else */ |
| return -EBUSY; |
| } |
| |
| #endif |
| |
| return 0; |
| } |
| |
| |
| static int dv1394_release(struct inode *inode, struct file *file) |
| { |
| struct video_card *video = file_to_video_card(file); |
| |
| /* OK to free the DMA buffer, no more mappings can exist */ |
| do_dv1394_shutdown(video, 1); |
| |
| /* clean up async I/O users */ |
| dv1394_fasync(-1, file, 0); |
| |
| /* give someone else a turn */ |
| clear_bit(0, &video->open); |
| |
| return 0; |
| } |
| |
| |
| /*** DEVICE DRIVER HANDLERS ************************************************/ |
| |
| static void it_tasklet_func(unsigned long data) |
| { |
| int wake = 0; |
| struct video_card *video = (struct video_card*) data; |
| |
| spin_lock(&video->spinlock); |
| |
| if (!video->dma_running) |
| goto out; |
| |
| irq_printk("ContextControl = %08x, CommandPtr = %08x\n", |
| reg_read(video->ohci, video->ohci_IsoXmitContextControlSet), |
| reg_read(video->ohci, video->ohci_IsoXmitCommandPtr) |
| ); |
| |
| |
| if ( (video->ohci_it_ctx != -1) && |
| (reg_read(video->ohci, video->ohci_IsoXmitContextControlSet) & (1 << 10)) ) { |
| |
| struct frame *f; |
| unsigned int frame, i; |
| |
| |
| if (video->active_frame == -1) |
| frame = 0; |
| else |
| frame = video->active_frame; |
| |
| /* check all the DMA-able frames */ |
| for (i = 0; i < video->n_frames; i++, frame = (frame+1) % video->n_frames) { |
| |
| irq_printk("IRQ checking frame %d...", frame); |
| f = video->frames[frame]; |
| if (f->state != FRAME_READY) { |
| irq_printk("clear, skipping\n"); |
| /* we don't own this frame */ |
| continue; |
| } |
| |
| irq_printk("DMA\n"); |
| |
| /* check the frame begin semaphore to see if we can free the previous frame */ |
| if ( *(f->frame_begin_timestamp) ) { |
| int prev_frame; |
| struct frame *prev_f; |
| |
| |
| |
| /* don't reset, need this later *(f->frame_begin_timestamp) = 0; */ |
| irq_printk(" BEGIN\n"); |
| |
| prev_frame = frame - 1; |
| if (prev_frame == -1) |
| prev_frame += video->n_frames; |
| prev_f = video->frames[prev_frame]; |
| |
| /* make sure we can actually garbage collect |
| this frame */ |
| if ( (prev_f->state == FRAME_READY) && |
| prev_f->done && (!f->done) ) |
| { |
| frame_reset(prev_f); |
| video->n_clear_frames++; |
| wake = 1; |
| video->active_frame = frame; |
| |
| irq_printk(" BEGIN - freeing previous frame %d, new active frame is %d\n", prev_frame, frame); |
| } else { |
| irq_printk(" BEGIN - can't free yet\n"); |
| } |
| |
| f->done = 1; |
| } |
| |
| |
| /* see if we need to set the timestamp for the next frame */ |
| if ( *(f->mid_frame_timestamp) ) { |
| struct frame *next_frame; |
| u32 begin_ts, ts_cyc, ts_off; |
| |
| *(f->mid_frame_timestamp) = 0; |
| |
| begin_ts = le32_to_cpu(*(f->frame_begin_timestamp)); |
| |
| irq_printk(" MIDDLE - first packet was sent at cycle %4u (%2u), assigned timestamp was (%2u) %4u\n", |
| begin_ts & 0x1FFF, begin_ts & 0xF, |
| f->assigned_timestamp >> 12, f->assigned_timestamp & 0xFFF); |
| |
| /* prepare next frame and assign timestamp */ |
| next_frame = video->frames[ (frame+1) % video->n_frames ]; |
| |
| if (next_frame->state == FRAME_READY) { |
| irq_printk(" MIDDLE - next frame is ready, good\n"); |
| } else { |
| debug_printk("dv1394: Underflow! At least one frame has been dropped.\n"); |
| next_frame = f; |
| } |
| |
| /* set the timestamp to the timestamp of the last frame sent, |
| plus the length of the last frame sent, plus the syt latency */ |
| ts_cyc = begin_ts & 0xF; |
| /* advance one frame, plus syt latency (typically 2-3) */ |
| ts_cyc += f->n_packets + video->syt_offset ; |
| |
| ts_off = 0; |
| |
| ts_cyc += ts_off/3072; |
| ts_off %= 3072; |
| |
| next_frame->assigned_timestamp = ((ts_cyc&0xF) << 12) + ts_off; |
| if (next_frame->cip_syt1) { |
| next_frame->cip_syt1->b[6] = next_frame->assigned_timestamp >> 8; |
| next_frame->cip_syt1->b[7] = next_frame->assigned_timestamp & 0xFF; |
| } |
| if (next_frame->cip_syt2) { |
| next_frame->cip_syt2->b[6] = next_frame->assigned_timestamp >> 8; |
| next_frame->cip_syt2->b[7] = next_frame->assigned_timestamp & 0xFF; |
| } |
| |
| } |
| |
| /* see if the frame looped */ |
| if ( *(f->frame_end_timestamp) ) { |
| |
| *(f->frame_end_timestamp) = 0; |
| |
| debug_printk(" END - the frame looped at least once\n"); |
| |
| video->dropped_frames++; |
| } |
| |
| } /* for (each frame) */ |
| } |
| |
| if (wake) { |
| kill_fasync(&video->fasync, SIGIO, POLL_OUT); |
| |
| /* wake readers/writers/ioctl'ers */ |
| wake_up_interruptible(&video->waitq); |
| } |
| |
| out: |
| spin_unlock(&video->spinlock); |
| } |
| |
| static void ir_tasklet_func(unsigned long data) |
| { |
| int wake = 0; |
| struct video_card *video = (struct video_card*) data; |
| |
| spin_lock(&video->spinlock); |
| |
| if (!video->dma_running) |
| goto out; |
| |
| if ( (video->ohci_ir_ctx != -1) && |
| (reg_read(video->ohci, video->ohci_IsoRcvContextControlSet) & (1 << 10)) ) { |
| |
| int sof=0; /* start-of-frame flag */ |
| struct frame *f; |
| u16 packet_length, packet_time; |
| int i, dbc=0; |
| struct DMA_descriptor_block *block = NULL; |
| u16 xferstatus; |
| |
| int next_i, prev_i; |
| struct DMA_descriptor_block *next = NULL; |
| dma_addr_t next_dma = 0; |
| struct DMA_descriptor_block *prev = NULL; |
| |
| /* loop over all descriptors in all frames */ |
| for (i = 0; i < video->n_frames*MAX_PACKETS; i++) { |
| struct packet *p = dma_region_i(&video->packet_buf, struct packet, video->current_packet); |
| |
| /* make sure we are seeing the latest changes to p */ |
| dma_region_sync_for_cpu(&video->packet_buf, |
| (unsigned long) p - (unsigned long) video->packet_buf.kvirt, |
| sizeof(struct packet)); |
| |
| packet_length = le16_to_cpu(p->data_length); |
| packet_time = le16_to_cpu(p->timestamp); |
| |
| irq_printk("received packet %02d, timestamp=%04x, length=%04x, sof=%02x%02x\n", video->current_packet, |
| packet_time, packet_length, |
| p->data[0], p->data[1]); |
| |
| /* get the descriptor based on packet_buffer cursor */ |
| f = video->frames[video->current_packet / MAX_PACKETS]; |
| block = &(f->descriptor_pool[video->current_packet % MAX_PACKETS]); |
| xferstatus = le32_to_cpu(block->u.in.il.q[3]) >> 16; |
| xferstatus &= 0x1F; |
| irq_printk("ir_tasklet_func: xferStatus/resCount [%d] = 0x%08x\n", i, le32_to_cpu(block->u.in.il.q[3]) ); |
| |
| /* get the current frame */ |
| f = video->frames[video->active_frame]; |
| |
| /* exclude empty packet */ |
| if (packet_length > 8 && xferstatus == 0x11) { |
| /* check for start of frame */ |
| /* DRD> Changed to check section type ([0]>>5==0) |
| and dif sequence ([1]>>4==0) */ |
| sof = ( (p->data[0] >> 5) == 0 && (p->data[1] >> 4) == 0); |
| |
| dbc = (int) (p->cip_h1 >> 24); |
| if ( video->continuity_counter != -1 && dbc > ((video->continuity_counter + 1) % 256) ) |
| { |
| printk(KERN_WARNING "dv1394: discontinuity detected, dropping all frames\n" ); |
| video->dropped_frames += video->n_clear_frames + 1; |
| video->first_frame = 0; |
| video->n_clear_frames = 0; |
| video->first_clear_frame = -1; |
| } |
| video->continuity_counter = dbc; |
| |
| if (!video->first_frame) { |
| if (sof) { |
| video->first_frame = 1; |
| } |
| |
| } else if (sof) { |
| /* close current frame */ |
| frame_reset(f); /* f->state = STATE_CLEAR */ |
| video->n_clear_frames++; |
| if (video->n_clear_frames > video->n_frames) { |
| video->dropped_frames++; |
| printk(KERN_WARNING "dv1394: dropped a frame during reception\n" ); |
| video->n_clear_frames = video->n_frames-1; |
| video->first_clear_frame = (video->first_clear_frame + 1) % video->n_frames; |
| } |
| if (video->first_clear_frame == -1) |
| video->first_clear_frame = video->active_frame; |
| |
| /* get the next frame */ |
| video->active_frame = (video->active_frame + 1) % video->n_frames; |
| f = video->frames[video->active_frame]; |
| irq_printk(" frame received, active_frame = %d, n_clear_frames = %d, first_clear_frame = %d\n", |
| video->active_frame, video->n_clear_frames, video->first_clear_frame); |
| } |
| if (video->first_frame) { |
| if (sof) { |
| /* open next frame */ |
| f->state = FRAME_READY; |
| } |
| |
| /* copy to buffer */ |
| if (f->n_packets > (video->frame_size / 480)) { |
| printk(KERN_ERR "frame buffer overflow during receive\n"); |
| } |
| |
| frame_put_packet(f, p); |
| |
| } /* first_frame */ |
| } |
| |
| /* stop, end of ready packets */ |
| else if (xferstatus == 0) { |
| break; |
| } |
| |
| /* reset xferStatus & resCount */ |
| block->u.in.il.q[3] = cpu_to_le32(512); |
| |
| /* terminate dma chain at this (next) packet */ |
| next_i = video->current_packet; |
| f = video->frames[next_i / MAX_PACKETS]; |
| next = &(f->descriptor_pool[next_i % MAX_PACKETS]); |
| next_dma = ((unsigned long) block - (unsigned long) f->descriptor_pool) + f->descriptor_pool_dma; |
| next->u.in.il.q[0] |= 3 << 20; /* enable interrupt */ |
| next->u.in.il.q[2] = 0; /* disable branch */ |
| |
| /* link previous to next */ |
| prev_i = (next_i == 0) ? (MAX_PACKETS * video->n_frames - 1) : (next_i - 1); |
| f = video->frames[prev_i / MAX_PACKETS]; |
| prev = &(f->descriptor_pool[prev_i % MAX_PACKETS]); |
| if (prev_i % (MAX_PACKETS/2)) { |
| prev->u.in.il.q[0] &= ~(3 << 20); /* no interrupt */ |
| } else { |
| prev->u.in.il.q[0] |= 3 << 20; /* enable interrupt */ |
| } |
| prev->u.in.il.q[2] = cpu_to_le32(next_dma | 1); /* set Z=1 */ |
| wmb(); |
| |
| /* wake up DMA in case it fell asleep */ |
| reg_write(video->ohci, video->ohci_IsoRcvContextControlSet, (1 << 12)); |
| |
| /* advance packet_buffer cursor */ |
| video->current_packet = (video->current_packet + 1) % (MAX_PACKETS * video->n_frames); |
| |
| } /* for all packets */ |
| |
| wake = 1; /* why the hell not? */ |
| |
| } /* receive interrupt */ |
| |
| if (wake) { |
| kill_fasync(&video->fasync, SIGIO, POLL_IN); |
| |
| /* wake readers/writers/ioctl'ers */ |
| wake_up_interruptible(&video->waitq); |
| } |
| |
| out: |
| spin_unlock(&video->spinlock); |
| } |
| |
| static struct cdev dv1394_cdev; |
| static struct file_operations dv1394_fops= |
| { |
| .owner = THIS_MODULE, |
| .poll = dv1394_poll, |
| .unlocked_ioctl = dv1394_ioctl, |
| #ifdef CONFIG_COMPAT |
| .compat_ioctl = dv1394_compat_ioctl, |
| #endif |
| .mmap = dv1394_mmap, |
| .open = dv1394_open, |
| .write = dv1394_write, |
| .read = dv1394_read, |
| .release = dv1394_release, |
| .fasync = dv1394_fasync, |
| }; |
| |
| |
| /*** HOTPLUG STUFF **********************************************************/ |
| /* |
| * Export information about protocols/devices supported by this driver. |
| */ |
| static struct ieee1394_device_id dv1394_id_table[] = { |
| { |
| .match_flags = IEEE1394_MATCH_SPECIFIER_ID | IEEE1394_MATCH_VERSION, |
| .specifier_id = AVC_UNIT_SPEC_ID_ENTRY & 0xffffff, |
| .version = AVC_SW_VERSION_ENTRY & 0xffffff |
| }, |
| { } |
| }; |
| |
| MODULE_DEVICE_TABLE(ieee1394, dv1394_id_table); |
| |
| static struct hpsb_protocol_driver dv1394_driver = { |
| .name = "DV/1394 Driver", |
| .id_table = dv1394_id_table, |
| .driver = { |
| .name = "dv1394", |
| .bus = &ieee1394_bus_type, |
| }, |
| }; |
| |
| |
| /*** IEEE1394 HPSB CALLBACKS ***********************************************/ |
| |
| static int dv1394_init(struct ti_ohci *ohci, enum pal_or_ntsc format, enum modes mode) |
| { |
| struct video_card *video; |
| unsigned long flags; |
| int i; |
| |
| video = kmalloc(sizeof(struct video_card), GFP_KERNEL); |
| if (!video) { |
| printk(KERN_ERR "dv1394: cannot allocate video_card\n"); |
| goto err; |
| } |
| |
| memset(video, 0, sizeof(struct video_card)); |
| |
| video->ohci = ohci; |
| /* lower 2 bits of id indicate which of four "plugs" |
| per host */ |
| video->id = ohci->host->id << 2; |
| if (format == DV1394_NTSC) |
| video->id |= mode; |
| else |
| video->id |= 2 + mode; |
| |
| video->ohci_it_ctx = -1; |
| video->ohci_ir_ctx = -1; |
| |
| video->ohci_IsoXmitContextControlSet = 0; |
| video->ohci_IsoXmitContextControlClear = 0; |
| video->ohci_IsoXmitCommandPtr = 0; |
| |
| video->ohci_IsoRcvContextControlSet = 0; |
| video->ohci_IsoRcvContextControlClear = 0; |
| video->ohci_IsoRcvCommandPtr = 0; |
| video->ohci_IsoRcvContextMatch = 0; |
| |
| video->n_frames = 0; /* flag that video is not initialized */ |
| video->channel = 63; /* default to broadcast channel */ |
| video->active_frame = -1; |
| |
| /* initialize the following */ |
| video->pal_or_ntsc = format; |
| video->cip_n = 0; /* 0 = use builtin default */ |
| video->cip_d = 0; |
| video->syt_offset = 0; |
| video->mode = mode; |
| |
| for (i = 0; i < DV1394_MAX_FRAMES; i++) |
| video->frames[i] = NULL; |
| |
| dma_region_init(&video->dv_buf); |
| video->dv_buf_size = 0; |
| dma_region_init(&video->packet_buf); |
| video->packet_buf_size = 0; |
| |
| clear_bit(0, &video->open); |
| spin_lock_init(&video->spinlock); |
| video->dma_running = 0; |
| init_MUTEX(&video->sem); |
| init_waitqueue_head(&video->waitq); |
| video->fasync = NULL; |
| |
| spin_lock_irqsave(&dv1394_cards_lock, flags); |
| INIT_LIST_HEAD(&video->list); |
| list_add_tail(&video->list, &dv1394_cards); |
| spin_unlock_irqrestore(&dv1394_cards_lock, flags); |
| |
| if (devfs_mk_cdev(MKDEV(IEEE1394_MAJOR, |
| IEEE1394_MINOR_BLOCK_DV1394*16 + video->id), |
| S_IFCHR|S_IRUGO|S_IWUGO, |
| "ieee1394/dv/host%d/%s/%s", |
| (video->id>>2), |
| (video->pal_or_ntsc == DV1394_NTSC ? "NTSC" : "PAL"), |
| (video->mode == MODE_RECEIVE ? "in" : "out")) < 0) |
| goto err_free; |
| |
| debug_printk("dv1394: dv1394_init() OK on ID %d\n", video->id); |
| |
| return 0; |
| |
| err_free: |
| kfree(video); |
| err: |
| return -1; |
| } |
| |
| static void dv1394_un_init(struct video_card *video) |
| { |
| char buf[32]; |
| |
| /* obviously nobody has the driver open at this point */ |
| do_dv1394_shutdown(video, 1); |
| snprintf(buf, sizeof(buf), "dv/host%d/%s/%s", (video->id >> 2), |
| (video->pal_or_ntsc == DV1394_NTSC ? "NTSC" : "PAL"), |
| (video->mode == MODE_RECEIVE ? "in" : "out") |
| ); |
| |
| devfs_remove("ieee1394/%s", buf); |
| kfree(video); |
| } |
| |
| |
| static void dv1394_remove_host (struct hpsb_host *host) |
| { |
| struct video_card *video; |
| unsigned long flags; |
| int id = host->id; |
| |
| /* We only work with the OHCI-1394 driver */ |
| if (strcmp(host->driver->name, OHCI1394_DRIVER_NAME)) |
| return; |
| |
| /* find the corresponding video_cards */ |
| do { |
| struct video_card *tmp_vid; |
| |
| video = NULL; |
| |
| spin_lock_irqsave(&dv1394_cards_lock, flags); |
| list_for_each_entry(tmp_vid, &dv1394_cards, list) { |
| if ((tmp_vid->id >> 2) == id) { |
| list_del(&tmp_vid->list); |
| video = tmp_vid; |
| break; |
| } |
| } |
| spin_unlock_irqrestore(&dv1394_cards_lock, flags); |
| |
| if (video) |
| dv1394_un_init(video); |
| } while (video != NULL); |
| |
| class_device_destroy(hpsb_protocol_class, |
| MKDEV(IEEE1394_MAJOR, IEEE1394_MINOR_BLOCK_DV1394 * 16 + (id<<2))); |
| devfs_remove("ieee1394/dv/host%d/NTSC", id); |
| devfs_remove("ieee1394/dv/host%d/PAL", id); |
| devfs_remove("ieee1394/dv/host%d", id); |
| } |
| |
| static void dv1394_add_host (struct hpsb_host *host) |
| { |
| struct ti_ohci *ohci; |
| int id = host->id; |
| |
| /* We only work with the OHCI-1394 driver */ |
| if (strcmp(host->driver->name, OHCI1394_DRIVER_NAME)) |
| return; |
| |
| ohci = (struct ti_ohci *)host->hostdata; |
| |
| class_device_create(hpsb_protocol_class, MKDEV( |
| IEEE1394_MAJOR, IEEE1394_MINOR_BLOCK_DV1394 * 16 + (id<<2)), |
| NULL, "dv1394-%d", id); |
| devfs_mk_dir("ieee1394/dv/host%d", id); |
| devfs_mk_dir("ieee1394/dv/host%d/NTSC", id); |
| devfs_mk_dir("ieee1394/dv/host%d/PAL", id); |
| |
| dv1394_init(ohci, DV1394_NTSC, MODE_RECEIVE); |
| dv1394_init(ohci, DV1394_NTSC, MODE_TRANSMIT); |
| dv1394_init(ohci, DV1394_PAL, MODE_RECEIVE); |
| dv1394_init(ohci, DV1394_PAL, MODE_TRANSMIT); |
| } |
| |
| |
| /* Bus reset handler. In the event of a bus reset, we may need to |
| re-start the DMA contexts - otherwise the user program would |
| end up waiting forever. |
| */ |
| |
| static void dv1394_host_reset(struct hpsb_host *host) |
| { |
| struct ti_ohci *ohci; |
| struct video_card *video = NULL, *tmp_vid; |
| unsigned long flags; |
| |
| /* We only work with the OHCI-1394 driver */ |
| if (strcmp(host->driver->name, OHCI1394_DRIVER_NAME)) |
| return; |
| |
| ohci = (struct ti_ohci *)host->hostdata; |
| |
| |
| /* find the corresponding video_cards */ |
| spin_lock_irqsave(&dv1394_cards_lock, flags); |
| list_for_each_entry(tmp_vid, &dv1394_cards, list) { |
| if ((tmp_vid->id >> 2) == host->id) { |
| video = tmp_vid; |
| break; |
| } |
| } |
| spin_unlock_irqrestore(&dv1394_cards_lock, flags); |
| |
| if (!video) |
| return; |
| |
| |
| spin_lock_irqsave(&video->spinlock, flags); |
| |
| if (!video->dma_running) |
| goto out; |
| |
| /* check IT context */ |
| if (video->ohci_it_ctx != -1) { |
| u32 ctx; |
| |
| ctx = reg_read(video->ohci, video->ohci_IsoXmitContextControlSet); |
| |
| /* if (RUN but not ACTIVE) */ |
| if ( (ctx & (1<<15)) && |
| !(ctx & (1<<10)) ) { |
| |
| debug_printk("dv1394: IT context stopped due to bus reset; waking it up\n"); |
| |
| /* to be safe, assume a frame has been dropped. User-space programs |
| should handle this condition like an underflow. */ |
| video->dropped_frames++; |
| |
| /* for some reason you must clear, then re-set the RUN bit to restart DMA */ |
| |
| /* clear RUN */ |
| reg_write(video->ohci, video->ohci_IsoXmitContextControlClear, (1 << 15)); |
| flush_pci_write(video->ohci); |
| |
| /* set RUN */ |
| reg_write(video->ohci, video->ohci_IsoXmitContextControlSet, (1 << 15)); |
| flush_pci_write(video->ohci); |
| |
| /* set the WAKE bit (just in case; this isn't strictly necessary) */ |
| reg_write(video->ohci, video->ohci_IsoXmitContextControlSet, (1 << 12)); |
| flush_pci_write(video->ohci); |
| |
| irq_printk("dv1394: AFTER IT restart ctx 0x%08x ptr 0x%08x\n", |
| reg_read(video->ohci, video->ohci_IsoXmitContextControlSet), |
| reg_read(video->ohci, video->ohci_IsoXmitCommandPtr)); |
| } |
| } |
| |
| /* check IR context */ |
| if (video->ohci_ir_ctx != -1) { |
| u32 ctx; |
| |
| ctx = reg_read(video->ohci, video->ohci_IsoRcvContextControlSet); |
| |
| /* if (RUN but not ACTIVE) */ |
| if ( (ctx & (1<<15)) && |
| !(ctx & (1<<10)) ) { |
| |
| debug_printk("dv1394: IR context stopped due to bus reset; waking it up\n"); |
| |
| /* to be safe, assume a frame has been dropped. User-space programs |
| should handle this condition like an overflow. */ |
| video->dropped_frames++; |
| |
| /* for some reason you must clear, then re-set the RUN bit to restart DMA */ |
| /* XXX this doesn't work for me, I can't get IR DMA to restart :[ */ |
| |
| /* clear RUN */ |
| reg_write(video->ohci, video->ohci_IsoRcvContextControlClear, (1 << 15)); |
| flush_pci_write(video->ohci); |
| |
| /* set RUN */ |
| reg_write(video->ohci, video->ohci_IsoRcvContextControlSet, (1 << 15)); |
| flush_pci_write(video->ohci); |
| |
| /* set the WAKE bit (just in case; this isn't strictly necessary) */ |
| reg_write(video->ohci, video->ohci_IsoRcvContextControlSet, (1 << 12)); |
| flush_pci_write(video->ohci); |
| |
| irq_printk("dv1394: AFTER IR restart ctx 0x%08x ptr 0x%08x\n", |
| reg_read(video->ohci, video->ohci_IsoRcvContextControlSet), |
| reg_read(video->ohci, video->ohci_IsoRcvCommandPtr)); |
| } |
| } |
| |
| out: |
| spin_unlock_irqrestore(&video->spinlock, flags); |
| |
| /* wake readers/writers/ioctl'ers */ |
| wake_up_interruptible(&video->waitq); |
| } |
| |
| static struct hpsb_highlevel dv1394_highlevel = { |
| .name = "dv1394", |
| .add_host = dv1394_add_host, |
| .remove_host = dv1394_remove_host, |
| .host_reset = dv1394_host_reset, |
| }; |
| |
| #ifdef CONFIG_COMPAT |
| |
| #define DV1394_IOC32_INIT _IOW('#', 0x06, struct dv1394_init32) |
| #define DV1394_IOC32_GET_STATUS _IOR('#', 0x0c, struct dv1394_status32) |
| |
| struct dv1394_init32 { |
| u32 api_version; |
| u32 channel; |
| u32 n_frames; |
| u32 format; |
| u32 cip_n; |
| u32 cip_d; |
| u32 syt_offset; |
| }; |
| |
| struct dv1394_status32 { |
| struct dv1394_init32 init; |
| s32 active_frame; |
| u32 first_clear_frame; |
| u32 n_clear_frames; |
| u32 dropped_frames; |
| }; |
| |
| /* RED-PEN: this should use compat_alloc_userspace instead */ |
| |
| static int handle_dv1394_init(struct file *file, unsigned int cmd, unsigned long arg) |
| { |
| struct dv1394_init32 dv32; |
| struct dv1394_init dv; |
| mm_segment_t old_fs; |
| int ret; |
| |
| if (file->f_op->unlocked_ioctl != dv1394_ioctl) |
| return -EFAULT; |
| |
| if (copy_from_user(&dv32, (void __user *)arg, sizeof(dv32))) |
| return -EFAULT; |
| |
| dv.api_version = dv32.api_version; |
| dv.channel = dv32.channel; |
| dv.n_frames = dv32.n_frames; |
| dv.format = dv32.format; |
| dv.cip_n = (unsigned long)dv32.cip_n; |
| dv.cip_d = (unsigned long)dv32.cip_d; |
| dv.syt_offset = dv32.syt_offset; |
| |
| old_fs = get_fs(); |
| set_fs(KERNEL_DS); |
| ret = dv1394_ioctl(file, DV1394_IOC_INIT, (unsigned long)&dv); |
| set_fs(old_fs); |
| |
| return ret; |
| } |
| |
| static int handle_dv1394_get_status(struct file *file, unsigned int cmd, unsigned long arg) |
| { |
| struct dv1394_status32 dv32; |
| struct dv1394_status dv; |
| mm_segment_t old_fs; |
| int ret; |
| |
| if (file->f_op->unlocked_ioctl != dv1394_ioctl) |
| return -EFAULT; |
| |
| old_fs = get_fs(); |
| set_fs(KERNEL_DS); |
| ret = dv1394_ioctl(file, DV1394_IOC_GET_STATUS, (unsigned long)&dv); |
| set_fs(old_fs); |
| |
| if (!ret) { |
| dv32.init.api_version = dv.init.api_version; |
| dv32.init.channel = dv.init.channel; |
| dv32.init.n_frames = dv.init.n_frames; |
| dv32.init.format = dv.init.format; |
| dv32.init.cip_n = (u32)dv.init.cip_n; |
| dv32.init.cip_d = (u32)dv.init.cip_d; |
| dv32.init.syt_offset = dv.init.syt_offset; |
| dv32.active_frame = dv.active_frame; |
| dv32.first_clear_frame = dv.first_clear_frame; |
| dv32.n_clear_frames = dv.n_clear_frames; |
| dv32.dropped_frames = dv.dropped_frames; |
| |
| if (copy_to_user((struct dv1394_status32 __user *)arg, &dv32, sizeof(dv32))) |
| ret = -EFAULT; |
| } |
| |
| return ret; |
| } |
| |
| |
| |
| static long dv1394_compat_ioctl(struct file *file, unsigned int cmd, |
| unsigned long arg) |
| { |
| switch (cmd) { |
| case DV1394_IOC_SHUTDOWN: |
| case DV1394_IOC_SUBMIT_FRAMES: |
| case DV1394_IOC_WAIT_FRAMES: |
| case DV1394_IOC_RECEIVE_FRAMES: |
| case DV1394_IOC_START_RECEIVE: |
| return dv1394_ioctl(file, cmd, arg); |
| |
| case DV1394_IOC32_INIT: |
| return handle_dv1394_init(file, cmd, arg); |
| case DV1394_IOC32_GET_STATUS: |
| return handle_dv1394_get_status(file, cmd, arg); |
| default: |
| return -ENOIOCTLCMD; |
| } |
| } |
| |
| #endif /* CONFIG_COMPAT */ |
| |
| |
| /*** KERNEL MODULE HANDLERS ************************************************/ |
| |
| MODULE_AUTHOR("Dan Maas <dmaas@dcine.com>, Dan Dennedy <dan@dennedy.org>"); |
| MODULE_DESCRIPTION("driver for DV input/output on OHCI board"); |
| MODULE_SUPPORTED_DEVICE("dv1394"); |
| MODULE_LICENSE("GPL"); |
| |
| static void __exit dv1394_exit_module(void) |
| { |
| hpsb_unregister_protocol(&dv1394_driver); |
| |
| hpsb_unregister_highlevel(&dv1394_highlevel); |
| cdev_del(&dv1394_cdev); |
| devfs_remove("ieee1394/dv"); |
| } |
| |
| static int __init dv1394_init_module(void) |
| { |
| int ret; |
| |
| cdev_init(&dv1394_cdev, &dv1394_fops); |
| dv1394_cdev.owner = THIS_MODULE; |
| kobject_set_name(&dv1394_cdev.kobj, "dv1394"); |
| ret = cdev_add(&dv1394_cdev, IEEE1394_DV1394_DEV, 16); |
| if (ret) { |
| printk(KERN_ERR "dv1394: unable to register character device\n"); |
| return ret; |
| } |
| |
| devfs_mk_dir("ieee1394/dv"); |
| |
| hpsb_register_highlevel(&dv1394_highlevel); |
| |
| ret = hpsb_register_protocol(&dv1394_driver); |
| if (ret) { |
| printk(KERN_ERR "dv1394: failed to register protocol\n"); |
| hpsb_unregister_highlevel(&dv1394_highlevel); |
| devfs_remove("ieee1394/dv"); |
| cdev_del(&dv1394_cdev); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| module_init(dv1394_init_module); |
| module_exit(dv1394_exit_module); |