| /* |
| * Marvell Orion SPI controller driver |
| * |
| * Author: Shadi Ammouri <shadi@marvell.com> |
| * Copyright (C) 2007-2008 Marvell Ltd. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/interrupt.h> |
| #include <linux/delay.h> |
| #include <linux/platform_device.h> |
| #include <linux/err.h> |
| #include <linux/io.h> |
| #include <linux/spi/spi.h> |
| #include <linux/module.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/of.h> |
| #include <linux/of_device.h> |
| #include <linux/clk.h> |
| #include <linux/sizes.h> |
| #include <asm/unaligned.h> |
| |
| #define DRIVER_NAME "orion_spi" |
| |
| /* Runtime PM autosuspend timeout: PM is fairly light on this driver */ |
| #define SPI_AUTOSUSPEND_TIMEOUT 200 |
| |
| /* Some SoCs using this driver support up to 8 chip selects. |
| * It is up to the implementer to only use the chip selects |
| * that are available. |
| */ |
| #define ORION_NUM_CHIPSELECTS 8 |
| |
| #define ORION_SPI_WAIT_RDY_MAX_LOOP 2000 /* in usec */ |
| |
| #define ORION_SPI_IF_CTRL_REG 0x00 |
| #define ORION_SPI_IF_CONFIG_REG 0x04 |
| #define ORION_SPI_DATA_OUT_REG 0x08 |
| #define ORION_SPI_DATA_IN_REG 0x0c |
| #define ORION_SPI_INT_CAUSE_REG 0x10 |
| |
| #define ORION_SPI_MODE_CPOL (1 << 11) |
| #define ORION_SPI_MODE_CPHA (1 << 12) |
| #define ORION_SPI_IF_8_16_BIT_MODE (1 << 5) |
| #define ORION_SPI_CLK_PRESCALE_MASK 0x1F |
| #define ARMADA_SPI_CLK_PRESCALE_MASK 0xDF |
| #define ORION_SPI_MODE_MASK (ORION_SPI_MODE_CPOL | \ |
| ORION_SPI_MODE_CPHA) |
| #define ORION_SPI_CS_MASK 0x1C |
| #define ORION_SPI_CS_SHIFT 2 |
| #define ORION_SPI_CS(cs) ((cs << ORION_SPI_CS_SHIFT) & \ |
| ORION_SPI_CS_MASK) |
| |
| enum orion_spi_type { |
| ORION_SPI, |
| ARMADA_SPI, |
| }; |
| |
| struct orion_spi_dev { |
| enum orion_spi_type typ; |
| unsigned int min_divisor; |
| unsigned int max_divisor; |
| u32 prescale_mask; |
| }; |
| |
| struct orion_spi { |
| struct spi_master *master; |
| void __iomem *base; |
| struct clk *clk; |
| const struct orion_spi_dev *devdata; |
| }; |
| |
| static inline void __iomem *spi_reg(struct orion_spi *orion_spi, u32 reg) |
| { |
| return orion_spi->base + reg; |
| } |
| |
| static inline void |
| orion_spi_setbits(struct orion_spi *orion_spi, u32 reg, u32 mask) |
| { |
| void __iomem *reg_addr = spi_reg(orion_spi, reg); |
| u32 val; |
| |
| val = readl(reg_addr); |
| val |= mask; |
| writel(val, reg_addr); |
| } |
| |
| static inline void |
| orion_spi_clrbits(struct orion_spi *orion_spi, u32 reg, u32 mask) |
| { |
| void __iomem *reg_addr = spi_reg(orion_spi, reg); |
| u32 val; |
| |
| val = readl(reg_addr); |
| val &= ~mask; |
| writel(val, reg_addr); |
| } |
| |
| static int orion_spi_baudrate_set(struct spi_device *spi, unsigned int speed) |
| { |
| u32 tclk_hz; |
| u32 rate; |
| u32 prescale; |
| u32 reg; |
| struct orion_spi *orion_spi; |
| const struct orion_spi_dev *devdata; |
| |
| orion_spi = spi_master_get_devdata(spi->master); |
| devdata = orion_spi->devdata; |
| |
| tclk_hz = clk_get_rate(orion_spi->clk); |
| |
| if (devdata->typ == ARMADA_SPI) { |
| unsigned int clk, spr, sppr, sppr2, err; |
| unsigned int best_spr, best_sppr, best_err; |
| |
| best_err = speed; |
| best_spr = 0; |
| best_sppr = 0; |
| |
| /* Iterate over the valid range looking for best fit */ |
| for (sppr = 0; sppr < 8; sppr++) { |
| sppr2 = 0x1 << sppr; |
| |
| spr = tclk_hz / sppr2; |
| spr = DIV_ROUND_UP(spr, speed); |
| if ((spr == 0) || (spr > 15)) |
| continue; |
| |
| clk = tclk_hz / (spr * sppr2); |
| err = speed - clk; |
| |
| if (err < best_err) { |
| best_spr = spr; |
| best_sppr = sppr; |
| best_err = err; |
| } |
| } |
| |
| if ((best_sppr == 0) && (best_spr == 0)) |
| return -EINVAL; |
| |
| prescale = ((best_sppr & 0x6) << 5) | |
| ((best_sppr & 0x1) << 4) | best_spr; |
| } else { |
| /* |
| * the supported rates are: 4,6,8...30 |
| * round up as we look for equal or less speed |
| */ |
| rate = DIV_ROUND_UP(tclk_hz, speed); |
| rate = roundup(rate, 2); |
| |
| /* check if requested speed is too small */ |
| if (rate > 30) |
| return -EINVAL; |
| |
| if (rate < 4) |
| rate = 4; |
| |
| /* Convert the rate to SPI clock divisor value. */ |
| prescale = 0x10 + rate/2; |
| } |
| |
| reg = readl(spi_reg(orion_spi, ORION_SPI_IF_CONFIG_REG)); |
| reg = ((reg & ~devdata->prescale_mask) | prescale); |
| writel(reg, spi_reg(orion_spi, ORION_SPI_IF_CONFIG_REG)); |
| |
| return 0; |
| } |
| |
| static void |
| orion_spi_mode_set(struct spi_device *spi) |
| { |
| u32 reg; |
| struct orion_spi *orion_spi; |
| |
| orion_spi = spi_master_get_devdata(spi->master); |
| |
| reg = readl(spi_reg(orion_spi, ORION_SPI_IF_CONFIG_REG)); |
| reg &= ~ORION_SPI_MODE_MASK; |
| if (spi->mode & SPI_CPOL) |
| reg |= ORION_SPI_MODE_CPOL; |
| if (spi->mode & SPI_CPHA) |
| reg |= ORION_SPI_MODE_CPHA; |
| writel(reg, spi_reg(orion_spi, ORION_SPI_IF_CONFIG_REG)); |
| } |
| |
| /* |
| * called only when no transfer is active on the bus |
| */ |
| static int |
| orion_spi_setup_transfer(struct spi_device *spi, struct spi_transfer *t) |
| { |
| struct orion_spi *orion_spi; |
| unsigned int speed = spi->max_speed_hz; |
| unsigned int bits_per_word = spi->bits_per_word; |
| int rc; |
| |
| orion_spi = spi_master_get_devdata(spi->master); |
| |
| if ((t != NULL) && t->speed_hz) |
| speed = t->speed_hz; |
| |
| if ((t != NULL) && t->bits_per_word) |
| bits_per_word = t->bits_per_word; |
| |
| orion_spi_mode_set(spi); |
| |
| rc = orion_spi_baudrate_set(spi, speed); |
| if (rc) |
| return rc; |
| |
| if (bits_per_word == 16) |
| orion_spi_setbits(orion_spi, ORION_SPI_IF_CONFIG_REG, |
| ORION_SPI_IF_8_16_BIT_MODE); |
| else |
| orion_spi_clrbits(orion_spi, ORION_SPI_IF_CONFIG_REG, |
| ORION_SPI_IF_8_16_BIT_MODE); |
| |
| return 0; |
| } |
| |
| static void orion_spi_set_cs(struct spi_device *spi, bool enable) |
| { |
| struct orion_spi *orion_spi; |
| |
| orion_spi = spi_master_get_devdata(spi->master); |
| |
| orion_spi_clrbits(orion_spi, ORION_SPI_IF_CTRL_REG, ORION_SPI_CS_MASK); |
| orion_spi_setbits(orion_spi, ORION_SPI_IF_CTRL_REG, |
| ORION_SPI_CS(spi->chip_select)); |
| |
| /* Chip select logic is inverted from spi_set_cs */ |
| if (!enable) |
| orion_spi_setbits(orion_spi, ORION_SPI_IF_CTRL_REG, 0x1); |
| else |
| orion_spi_clrbits(orion_spi, ORION_SPI_IF_CTRL_REG, 0x1); |
| } |
| |
| static inline int orion_spi_wait_till_ready(struct orion_spi *orion_spi) |
| { |
| int i; |
| |
| for (i = 0; i < ORION_SPI_WAIT_RDY_MAX_LOOP; i++) { |
| if (readl(spi_reg(orion_spi, ORION_SPI_INT_CAUSE_REG))) |
| return 1; |
| |
| udelay(1); |
| } |
| |
| return -1; |
| } |
| |
| static inline int |
| orion_spi_write_read_8bit(struct spi_device *spi, |
| const u8 **tx_buf, u8 **rx_buf) |
| { |
| void __iomem *tx_reg, *rx_reg, *int_reg; |
| struct orion_spi *orion_spi; |
| |
| orion_spi = spi_master_get_devdata(spi->master); |
| tx_reg = spi_reg(orion_spi, ORION_SPI_DATA_OUT_REG); |
| rx_reg = spi_reg(orion_spi, ORION_SPI_DATA_IN_REG); |
| int_reg = spi_reg(orion_spi, ORION_SPI_INT_CAUSE_REG); |
| |
| /* clear the interrupt cause register */ |
| writel(0x0, int_reg); |
| |
| if (tx_buf && *tx_buf) |
| writel(*(*tx_buf)++, tx_reg); |
| else |
| writel(0, tx_reg); |
| |
| if (orion_spi_wait_till_ready(orion_spi) < 0) { |
| dev_err(&spi->dev, "TXS timed out\n"); |
| return -1; |
| } |
| |
| if (rx_buf && *rx_buf) |
| *(*rx_buf)++ = readl(rx_reg); |
| |
| return 1; |
| } |
| |
| static inline int |
| orion_spi_write_read_16bit(struct spi_device *spi, |
| const u16 **tx_buf, u16 **rx_buf) |
| { |
| void __iomem *tx_reg, *rx_reg, *int_reg; |
| struct orion_spi *orion_spi; |
| |
| orion_spi = spi_master_get_devdata(spi->master); |
| tx_reg = spi_reg(orion_spi, ORION_SPI_DATA_OUT_REG); |
| rx_reg = spi_reg(orion_spi, ORION_SPI_DATA_IN_REG); |
| int_reg = spi_reg(orion_spi, ORION_SPI_INT_CAUSE_REG); |
| |
| /* clear the interrupt cause register */ |
| writel(0x0, int_reg); |
| |
| if (tx_buf && *tx_buf) |
| writel(__cpu_to_le16(get_unaligned((*tx_buf)++)), tx_reg); |
| else |
| writel(0, tx_reg); |
| |
| if (orion_spi_wait_till_ready(orion_spi) < 0) { |
| dev_err(&spi->dev, "TXS timed out\n"); |
| return -1; |
| } |
| |
| if (rx_buf && *rx_buf) |
| put_unaligned(__le16_to_cpu(readl(rx_reg)), (*rx_buf)++); |
| |
| return 1; |
| } |
| |
| static unsigned int |
| orion_spi_write_read(struct spi_device *spi, struct spi_transfer *xfer) |
| { |
| unsigned int count; |
| int word_len; |
| |
| word_len = spi->bits_per_word; |
| count = xfer->len; |
| |
| if (word_len == 8) { |
| const u8 *tx = xfer->tx_buf; |
| u8 *rx = xfer->rx_buf; |
| |
| do { |
| if (orion_spi_write_read_8bit(spi, &tx, &rx) < 0) |
| goto out; |
| count--; |
| } while (count); |
| } else if (word_len == 16) { |
| const u16 *tx = xfer->tx_buf; |
| u16 *rx = xfer->rx_buf; |
| |
| do { |
| if (orion_spi_write_read_16bit(spi, &tx, &rx) < 0) |
| goto out; |
| count -= 2; |
| } while (count); |
| } |
| |
| out: |
| return xfer->len - count; |
| } |
| |
| static int orion_spi_transfer_one(struct spi_master *master, |
| struct spi_device *spi, |
| struct spi_transfer *t) |
| { |
| int status = 0; |
| |
| status = orion_spi_setup_transfer(spi, t); |
| if (status < 0) |
| return status; |
| |
| if (t->len) |
| orion_spi_write_read(spi, t); |
| |
| return status; |
| } |
| |
| static int orion_spi_setup(struct spi_device *spi) |
| { |
| return orion_spi_setup_transfer(spi, NULL); |
| } |
| |
| static int orion_spi_reset(struct orion_spi *orion_spi) |
| { |
| /* Verify that the CS is deasserted */ |
| orion_spi_clrbits(orion_spi, ORION_SPI_IF_CTRL_REG, 0x1); |
| return 0; |
| } |
| |
| static const struct orion_spi_dev orion_spi_dev_data = { |
| .typ = ORION_SPI, |
| .min_divisor = 4, |
| .max_divisor = 30, |
| .prescale_mask = ORION_SPI_CLK_PRESCALE_MASK, |
| }; |
| |
| static const struct orion_spi_dev armada_spi_dev_data = { |
| .typ = ARMADA_SPI, |
| .min_divisor = 1, |
| .max_divisor = 1920, |
| .prescale_mask = ARMADA_SPI_CLK_PRESCALE_MASK, |
| }; |
| |
| static const struct of_device_id orion_spi_of_match_table[] = { |
| { .compatible = "marvell,orion-spi", .data = &orion_spi_dev_data, }, |
| { .compatible = "marvell,armada-370-spi", .data = &armada_spi_dev_data, }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(of, orion_spi_of_match_table); |
| |
| static int orion_spi_probe(struct platform_device *pdev) |
| { |
| const struct of_device_id *of_id; |
| const struct orion_spi_dev *devdata; |
| struct spi_master *master; |
| struct orion_spi *spi; |
| struct resource *r; |
| unsigned long tclk_hz; |
| int status = 0; |
| |
| master = spi_alloc_master(&pdev->dev, sizeof(*spi)); |
| if (master == NULL) { |
| dev_dbg(&pdev->dev, "master allocation failed\n"); |
| return -ENOMEM; |
| } |
| |
| if (pdev->id != -1) |
| master->bus_num = pdev->id; |
| if (pdev->dev.of_node) { |
| u32 cell_index; |
| |
| if (!of_property_read_u32(pdev->dev.of_node, "cell-index", |
| &cell_index)) |
| master->bus_num = cell_index; |
| } |
| |
| /* we support only mode 0, and no options */ |
| master->mode_bits = SPI_CPHA | SPI_CPOL; |
| master->set_cs = orion_spi_set_cs; |
| master->transfer_one = orion_spi_transfer_one; |
| master->num_chipselect = ORION_NUM_CHIPSELECTS; |
| master->setup = orion_spi_setup; |
| master->bits_per_word_mask = SPI_BPW_MASK(8) | SPI_BPW_MASK(16); |
| master->auto_runtime_pm = true; |
| |
| platform_set_drvdata(pdev, master); |
| |
| spi = spi_master_get_devdata(master); |
| spi->master = master; |
| |
| of_id = of_match_device(orion_spi_of_match_table, &pdev->dev); |
| devdata = (of_id) ? of_id->data : &orion_spi_dev_data; |
| spi->devdata = devdata; |
| |
| spi->clk = devm_clk_get(&pdev->dev, NULL); |
| if (IS_ERR(spi->clk)) { |
| status = PTR_ERR(spi->clk); |
| goto out; |
| } |
| |
| status = clk_prepare_enable(spi->clk); |
| if (status) |
| goto out; |
| |
| tclk_hz = clk_get_rate(spi->clk); |
| master->max_speed_hz = DIV_ROUND_UP(tclk_hz, devdata->min_divisor); |
| master->min_speed_hz = DIV_ROUND_UP(tclk_hz, devdata->max_divisor); |
| |
| r = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| spi->base = devm_ioremap_resource(&pdev->dev, r); |
| if (IS_ERR(spi->base)) { |
| status = PTR_ERR(spi->base); |
| goto out_rel_clk; |
| } |
| |
| pm_runtime_set_active(&pdev->dev); |
| pm_runtime_use_autosuspend(&pdev->dev); |
| pm_runtime_set_autosuspend_delay(&pdev->dev, SPI_AUTOSUSPEND_TIMEOUT); |
| pm_runtime_enable(&pdev->dev); |
| |
| status = orion_spi_reset(spi); |
| if (status < 0) |
| goto out_rel_pm; |
| |
| pm_runtime_mark_last_busy(&pdev->dev); |
| pm_runtime_put_autosuspend(&pdev->dev); |
| |
| master->dev.of_node = pdev->dev.of_node; |
| status = spi_register_master(master); |
| if (status < 0) |
| goto out_rel_pm; |
| |
| return status; |
| |
| out_rel_pm: |
| pm_runtime_disable(&pdev->dev); |
| out_rel_clk: |
| clk_disable_unprepare(spi->clk); |
| out: |
| spi_master_put(master); |
| return status; |
| } |
| |
| |
| static int orion_spi_remove(struct platform_device *pdev) |
| { |
| struct spi_master *master = platform_get_drvdata(pdev); |
| struct orion_spi *spi = spi_master_get_devdata(master); |
| |
| pm_runtime_get_sync(&pdev->dev); |
| clk_disable_unprepare(spi->clk); |
| |
| spi_unregister_master(master); |
| pm_runtime_disable(&pdev->dev); |
| |
| return 0; |
| } |
| |
| MODULE_ALIAS("platform:" DRIVER_NAME); |
| |
| #ifdef CONFIG_PM |
| static int orion_spi_runtime_suspend(struct device *dev) |
| { |
| struct spi_master *master = dev_get_drvdata(dev); |
| struct orion_spi *spi = spi_master_get_devdata(master); |
| |
| clk_disable_unprepare(spi->clk); |
| return 0; |
| } |
| |
| static int orion_spi_runtime_resume(struct device *dev) |
| { |
| struct spi_master *master = dev_get_drvdata(dev); |
| struct orion_spi *spi = spi_master_get_devdata(master); |
| |
| return clk_prepare_enable(spi->clk); |
| } |
| #endif |
| |
| static const struct dev_pm_ops orion_spi_pm_ops = { |
| SET_RUNTIME_PM_OPS(orion_spi_runtime_suspend, |
| orion_spi_runtime_resume, |
| NULL) |
| }; |
| |
| static struct platform_driver orion_spi_driver = { |
| .driver = { |
| .name = DRIVER_NAME, |
| .pm = &orion_spi_pm_ops, |
| .of_match_table = of_match_ptr(orion_spi_of_match_table), |
| }, |
| .probe = orion_spi_probe, |
| .remove = orion_spi_remove, |
| }; |
| |
| module_platform_driver(orion_spi_driver); |
| |
| MODULE_DESCRIPTION("Orion SPI driver"); |
| MODULE_AUTHOR("Shadi Ammouri <shadi@marvell.com>"); |
| MODULE_LICENSE("GPL"); |