| /* |
| * Copyright (c) 2011 Zhao Zhang <zhzhl555@gmail.com> |
| * |
| * Derived from driver/rtc/rtc-au1xxx.c |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/rtc.h> |
| #include <linux/init.h> |
| #include <linux/platform_device.h> |
| #include <linux/delay.h> |
| #include <linux/types.h> |
| #include <linux/io.h> |
| #include <asm/mach-loongson1/loongson1.h> |
| |
| #define LS1X_RTC_REG_OFFSET (LS1X_RTC_BASE + 0x20) |
| #define LS1X_RTC_REGS(x) \ |
| ((void __iomem *)KSEG1ADDR(LS1X_RTC_REG_OFFSET + (x))) |
| |
| /*RTC programmable counters 0 and 1*/ |
| #define SYS_COUNTER_CNTRL (LS1X_RTC_REGS(0x20)) |
| #define SYS_CNTRL_ERS (1 << 23) |
| #define SYS_CNTRL_RTS (1 << 20) |
| #define SYS_CNTRL_RM2 (1 << 19) |
| #define SYS_CNTRL_RM1 (1 << 18) |
| #define SYS_CNTRL_RM0 (1 << 17) |
| #define SYS_CNTRL_RS (1 << 16) |
| #define SYS_CNTRL_BP (1 << 14) |
| #define SYS_CNTRL_REN (1 << 13) |
| #define SYS_CNTRL_BRT (1 << 12) |
| #define SYS_CNTRL_TEN (1 << 11) |
| #define SYS_CNTRL_BTT (1 << 10) |
| #define SYS_CNTRL_E0 (1 << 8) |
| #define SYS_CNTRL_ETS (1 << 7) |
| #define SYS_CNTRL_32S (1 << 5) |
| #define SYS_CNTRL_TTS (1 << 4) |
| #define SYS_CNTRL_TM2 (1 << 3) |
| #define SYS_CNTRL_TM1 (1 << 2) |
| #define SYS_CNTRL_TM0 (1 << 1) |
| #define SYS_CNTRL_TS (1 << 0) |
| |
| /* Programmable Counter 0 Registers */ |
| #define SYS_TOYTRIM (LS1X_RTC_REGS(0)) |
| #define SYS_TOYWRITE0 (LS1X_RTC_REGS(4)) |
| #define SYS_TOYWRITE1 (LS1X_RTC_REGS(8)) |
| #define SYS_TOYREAD0 (LS1X_RTC_REGS(0xC)) |
| #define SYS_TOYREAD1 (LS1X_RTC_REGS(0x10)) |
| #define SYS_TOYMATCH0 (LS1X_RTC_REGS(0x14)) |
| #define SYS_TOYMATCH1 (LS1X_RTC_REGS(0x18)) |
| #define SYS_TOYMATCH2 (LS1X_RTC_REGS(0x1C)) |
| |
| /* Programmable Counter 1 Registers */ |
| #define SYS_RTCTRIM (LS1X_RTC_REGS(0x40)) |
| #define SYS_RTCWRITE0 (LS1X_RTC_REGS(0x44)) |
| #define SYS_RTCREAD0 (LS1X_RTC_REGS(0x48)) |
| #define SYS_RTCMATCH0 (LS1X_RTC_REGS(0x4C)) |
| #define SYS_RTCMATCH1 (LS1X_RTC_REGS(0x50)) |
| #define SYS_RTCMATCH2 (LS1X_RTC_REGS(0x54)) |
| |
| #define LS1X_SEC_OFFSET (4) |
| #define LS1X_MIN_OFFSET (10) |
| #define LS1X_HOUR_OFFSET (16) |
| #define LS1X_DAY_OFFSET (21) |
| #define LS1X_MONTH_OFFSET (26) |
| |
| |
| #define LS1X_SEC_MASK (0x3f) |
| #define LS1X_MIN_MASK (0x3f) |
| #define LS1X_HOUR_MASK (0x1f) |
| #define LS1X_DAY_MASK (0x1f) |
| #define LS1X_MONTH_MASK (0x3f) |
| #define LS1X_YEAR_MASK (0xffffffff) |
| |
| #define ls1x_get_sec(t) (((t) >> LS1X_SEC_OFFSET) & LS1X_SEC_MASK) |
| #define ls1x_get_min(t) (((t) >> LS1X_MIN_OFFSET) & LS1X_MIN_MASK) |
| #define ls1x_get_hour(t) (((t) >> LS1X_HOUR_OFFSET) & LS1X_HOUR_MASK) |
| #define ls1x_get_day(t) (((t) >> LS1X_DAY_OFFSET) & LS1X_DAY_MASK) |
| #define ls1x_get_month(t) (((t) >> LS1X_MONTH_OFFSET) & LS1X_MONTH_MASK) |
| |
| #define RTC_CNTR_OK (SYS_CNTRL_E0 | SYS_CNTRL_32S) |
| |
| static int ls1x_rtc_read_time(struct device *dev, struct rtc_time *rtm) |
| { |
| unsigned long v, t; |
| |
| v = readl(SYS_TOYREAD0); |
| t = readl(SYS_TOYREAD1); |
| |
| memset(rtm, 0, sizeof(struct rtc_time)); |
| t = mktime((t & LS1X_YEAR_MASK), ls1x_get_month(v), |
| ls1x_get_day(v), ls1x_get_hour(v), |
| ls1x_get_min(v), ls1x_get_sec(v)); |
| rtc_time_to_tm(t, rtm); |
| |
| return rtc_valid_tm(rtm); |
| } |
| |
| static int ls1x_rtc_set_time(struct device *dev, struct rtc_time *rtm) |
| { |
| unsigned long v, t, c; |
| int ret = -ETIMEDOUT; |
| |
| v = ((rtm->tm_mon + 1) << LS1X_MONTH_OFFSET) |
| | (rtm->tm_mday << LS1X_DAY_OFFSET) |
| | (rtm->tm_hour << LS1X_HOUR_OFFSET) |
| | (rtm->tm_min << LS1X_MIN_OFFSET) |
| | (rtm->tm_sec << LS1X_SEC_OFFSET); |
| |
| writel(v, SYS_TOYWRITE0); |
| c = 0x10000; |
| /* add timeout check counter, for more safe */ |
| while ((readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_TS) && --c) |
| usleep_range(1000, 3000); |
| |
| if (!c) { |
| dev_err(dev, "set time timeout!\n"); |
| goto err; |
| } |
| |
| t = rtm->tm_year + 1900; |
| writel(t, SYS_TOYWRITE1); |
| c = 0x10000; |
| while ((readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_TS) && --c) |
| usleep_range(1000, 3000); |
| |
| if (!c) { |
| dev_err(dev, "set time timeout!\n"); |
| goto err; |
| } |
| return 0; |
| err: |
| return ret; |
| } |
| |
| static struct rtc_class_ops ls1x_rtc_ops = { |
| .read_time = ls1x_rtc_read_time, |
| .set_time = ls1x_rtc_set_time, |
| }; |
| |
| static int __devinit ls1x_rtc_probe(struct platform_device *pdev) |
| { |
| struct rtc_device *rtcdev; |
| unsigned long v; |
| int ret; |
| |
| v = readl(SYS_COUNTER_CNTRL); |
| if (!(v & RTC_CNTR_OK)) { |
| dev_err(&pdev->dev, "rtc counters not working\n"); |
| ret = -ENODEV; |
| goto err; |
| } |
| ret = -ETIMEDOUT; |
| /* set to 1 HZ if needed */ |
| if (readl(SYS_TOYTRIM) != 32767) { |
| v = 0x100000; |
| while ((readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_TTS) && --v) |
| usleep_range(1000, 3000); |
| |
| if (!v) { |
| dev_err(&pdev->dev, "time out\n"); |
| goto err; |
| } |
| writel(32767, SYS_TOYTRIM); |
| } |
| /* this loop coundn't be endless */ |
| while (readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_TTS) |
| usleep_range(1000, 3000); |
| |
| rtcdev = rtc_device_register("ls1x-rtc", &pdev->dev, |
| &ls1x_rtc_ops , THIS_MODULE); |
| if (IS_ERR(rtcdev)) { |
| ret = PTR_ERR(rtcdev); |
| goto err; |
| } |
| |
| platform_set_drvdata(pdev, rtcdev); |
| return 0; |
| err: |
| return ret; |
| } |
| |
| static int __devexit ls1x_rtc_remove(struct platform_device *pdev) |
| { |
| struct rtc_device *rtcdev = platform_get_drvdata(pdev); |
| |
| rtc_device_unregister(rtcdev); |
| platform_set_drvdata(pdev, NULL); |
| |
| return 0; |
| } |
| |
| static struct platform_driver ls1x_rtc_driver = { |
| .driver = { |
| .name = "ls1x-rtc", |
| .owner = THIS_MODULE, |
| }, |
| .remove = __devexit_p(ls1x_rtc_remove), |
| .probe = ls1x_rtc_probe, |
| }; |
| |
| module_platform_driver(ls1x_rtc_driver); |
| |
| MODULE_AUTHOR("zhao zhang <zhzhl555@gmail.com>"); |
| MODULE_LICENSE("GPL"); |