ASoC: fsl_sai: Add asynchronous mode support
SAI supports these operation modes:
1) asynchronous mode
Both Tx and Rx are set to be asynchronous.
2) synchronous mode (Rx sync with Tx)
Tx is set to be asynchronous, Rx is set to be synchronous.
3) synchronous mode (Tx sync with Rx)
Rx is set to be asynchronous, Tx is set to be synchronous.
4) synchronous mode (Tx/Rx sync with another SAI's Tx)
5) synchronous mode (Tx/Rx sync with another SAI's Rx)
* 4) and 5) are beyond this patch because they are related with another SAI.
As the initial version of this SAI driver, it supported 2) as default while
the others were totally missing.
So this patch just adds supports for 1) and 3).
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c
index 3d865ad..ef7c758 100644
--- a/sound/soc/fsl/fsl_sai.c
+++ b/sound/soc/fsl/fsl_sai.c
@@ -330,12 +330,14 @@
u32 xcsr, count = 100;
/*
- * The transmitter bit clock and frame sync are to be
- * used by both the transmitter and receiver.
+ * Asynchronous mode: Clear SYNC for both Tx and Rx.
+ * Rx sync with Tx clocks: Clear SYNC for Tx, set it for Rx.
+ * Tx sync with Rx clocks: Clear SYNC for Rx, set it for Tx.
*/
- regmap_update_bits(sai->regmap, FSL_SAI_TCR2, FSL_SAI_CR2_SYNC, 0);
+ regmap_update_bits(sai->regmap, FSL_SAI_TCR2, FSL_SAI_CR2_SYNC,
+ sai->synchronous[TX] ? FSL_SAI_CR2_SYNC : 0);
regmap_update_bits(sai->regmap, FSL_SAI_RCR2, FSL_SAI_CR2_SYNC,
- FSL_SAI_CR2_SYNC);
+ sai->synchronous[RX] ? FSL_SAI_CR2_SYNC : 0);
/*
* It is recommended that the transmitter is the last enabled
@@ -625,6 +627,26 @@
return ret;
}
+ /* Sync Tx with Rx as default by following old DT binding */
+ sai->synchronous[RX] = true;
+ sai->synchronous[TX] = false;
+ fsl_sai_dai.symmetric_rates = 1;
+ fsl_sai_dai.symmetric_channels = 1;
+ fsl_sai_dai.symmetric_samplebits = 1;
+
+ if (of_find_property(np, "fsl,sai-synchronous-rx", NULL)) {
+ /* Sync Rx with Tx */
+ sai->synchronous[RX] = false;
+ sai->synchronous[TX] = true;
+ } else if (of_find_property(np, "fsl,sai-asynchronous", NULL)) {
+ /* Discard all settings for asynchronous mode */
+ sai->synchronous[RX] = false;
+ sai->synchronous[TX] = false;
+ fsl_sai_dai.symmetric_rates = 0;
+ fsl_sai_dai.symmetric_channels = 0;
+ fsl_sai_dai.symmetric_samplebits = 0;
+ }
+
sai->dma_params_rx.addr = res->start + FSL_SAI_RDR;
sai->dma_params_tx.addr = res->start + FSL_SAI_TDR;
sai->dma_params_rx.maxburst = FSL_SAI_MAXBURST_RX;
diff --git a/sound/soc/fsl/fsl_sai.h b/sound/soc/fsl/fsl_sai.h
index 8e1feab7..b3d8864 100644
--- a/sound/soc/fsl/fsl_sai.h
+++ b/sound/soc/fsl/fsl_sai.h
@@ -136,9 +136,13 @@
bool big_endian_data;
bool is_dsp_mode;
bool sai_on_imx;
+ bool synchronous[2];
struct snd_dmaengine_dai_dma_data dma_params_rx;
struct snd_dmaengine_dai_dma_data dma_params_tx;
};
+#define TX 1
+#define RX 0
+
#endif /* __FSL_SAI_H */