| * Clock bindings for Freescale i.MX23 |
| |
| Required properties: |
| - compatible: Should be "fsl,imx23-clkctrl" |
| - reg: Address and length of the register set |
| - #clock-cells: Should be <1> |
| |
| The clock consumer should specify the desired clock by having the clock |
| ID in its "clocks" phandle cell. The following is a full list of i.MX23 |
| clocks and IDs. |
| |
| Clock ID |
| ------------------ |
| ref_xtal 0 |
| pll 1 |
| ref_cpu 2 |
| ref_emi 3 |
| ref_pix 4 |
| ref_io 5 |
| saif_sel 6 |
| lcdif_sel 7 |
| gpmi_sel 8 |
| ssp_sel 9 |
| emi_sel 10 |
| cpu 11 |
| etm_sel 12 |
| cpu_pll 13 |
| cpu_xtal 14 |
| hbus 15 |
| xbus 16 |
| lcdif_div 17 |
| ssp_div 18 |
| gpmi_div 19 |
| emi_pll 20 |
| emi_xtal 21 |
| etm_div 22 |
| saif_div 23 |
| clk32k_div 24 |
| rtc 25 |
| adc 26 |
| spdif_div 27 |
| clk32k 28 |
| dri 29 |
| pwm 30 |
| filt 31 |
| uart 32 |
| ssp 33 |
| gpmi 34 |
| spdif 35 |
| emi 36 |
| saif 37 |
| lcdif 38 |
| etm 39 |
| usb 40 |
| usb_phy 41 |
| |
| Examples: |
| |
| clks: clkctrl@80040000 { |
| compatible = "fsl,imx23-clkctrl"; |
| reg = <0x80040000 0x2000>; |
| #clock-cells = <1>; |
| clock-output-names = |
| ... |
| "uart", /* 32 */ |
| ... |
| "end_of_list"; |
| }; |
| |
| auart0: serial@8006c000 { |
| compatible = "fsl,imx23-auart"; |
| reg = <0x8006c000 0x2000>; |
| interrupts = <24 25 23>; |
| clocks = <&clks 32>; |
| status = "disabled"; |
| }; |