staging: comedi: amplc_pci230: Remove forward declarations 2
Remove some forward function declarations: pci230_ct_setup_ns_mode(),
pci230_ns_to_single_timer(), pci230_cancel_ct(). Also need to move:
divide_ns().
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/staging/comedi/drivers/amplc_pci230.c b/drivers/staging/comedi/drivers/amplc_pci230.c
index a99e90f..d028962 100644
--- a/drivers/staging/comedi/drivers/amplc_pci230.c
+++ b/drivers/staging/comedi/drivers/amplc_pci230.c
@@ -579,11 +579,6 @@
/* PCI230 daccon bipolar flag for each analogue output range. */
static const unsigned char pci230_ao_bipolar[2] = { 0, 1 };
-static void pci230_ct_setup_ns_mode(struct comedi_device *dev, unsigned int ct,
- unsigned int mode, uint64_t ns,
- unsigned int round);
-static void pci230_ns_to_single_timer(unsigned int *ns, unsigned int round);
-static void pci230_cancel_ct(struct comedi_device *dev, unsigned int ct);
static void pci230_ao_stop(struct comedi_device *dev,
struct comedi_subdevice *s);
static void pci230_handle_ao_nofifo(struct comedi_device *dev,
@@ -738,6 +733,86 @@
put_resources(dev, (1U << NUM_RESOURCES) - 1, owner);
}
+static unsigned int divide_ns(uint64_t ns, unsigned int timebase,
+ unsigned int round_mode)
+{
+ uint64_t div;
+ unsigned int rem;
+
+ div = ns;
+ rem = do_div(div, timebase);
+ round_mode &= TRIG_ROUND_MASK;
+ switch (round_mode) {
+ default:
+ case TRIG_ROUND_NEAREST:
+ div += (rem + (timebase / 2)) / timebase;
+ break;
+ case TRIG_ROUND_DOWN:
+ break;
+ case TRIG_ROUND_UP:
+ div += (rem + timebase - 1) / timebase;
+ break;
+ }
+ return div > UINT_MAX ? UINT_MAX : (unsigned int)div;
+}
+
+/* Given desired period in ns, returns the required internal clock source
+ * and gets the initial count. */
+static unsigned int pci230_choose_clk_count(uint64_t ns, unsigned int *count,
+ unsigned int round_mode)
+{
+ unsigned int clk_src, cnt;
+
+ for (clk_src = CLK_10MHZ;; clk_src++) {
+ cnt = divide_ns(ns, pci230_timebase[clk_src], round_mode);
+ if ((cnt <= 65536) || (clk_src == CLK_1KHZ))
+ break;
+
+ }
+ *count = cnt;
+ return clk_src;
+}
+
+static void pci230_ns_to_single_timer(unsigned int *ns, unsigned int round)
+{
+ unsigned int count;
+ unsigned int clk_src;
+
+ clk_src = pci230_choose_clk_count(*ns, &count, round);
+ *ns = count * pci230_timebase[clk_src];
+ return;
+}
+
+static void pci230_ct_setup_ns_mode(struct comedi_device *dev, unsigned int ct,
+ unsigned int mode, uint64_t ns,
+ unsigned int round)
+{
+ struct pci230_private *devpriv = dev->private;
+ unsigned int clk_src;
+ unsigned int count;
+
+ /* Set mode. */
+ i8254_set_mode(devpriv->iobase1 + PCI230_Z2_CT_BASE, 0, ct, mode);
+ /* Determine clock source and count. */
+ clk_src = pci230_choose_clk_count(ns, &count, round);
+ /* Program clock source. */
+ outb(CLK_CONFIG(ct, clk_src), devpriv->iobase1 + PCI230_ZCLK_SCE);
+ /* Set initial count. */
+ if (count >= 65536)
+ count = 0;
+
+ i8254_write(devpriv->iobase1 + PCI230_Z2_CT_BASE, 0, ct, count);
+}
+
+static void pci230_cancel_ct(struct comedi_device *dev, unsigned int ct)
+{
+ struct pci230_private *devpriv = dev->private;
+
+ i8254_set_mode(devpriv->iobase1 + PCI230_Z2_CT_BASE, 0, ct,
+ I8254_MODE1);
+ /* Counter ct, 8254 mode 1, initial count not written. */
+}
+
/*
* COMEDI_SUBD_AI instruction;
*/
@@ -2183,86 +2258,6 @@
return 0;
}
-static unsigned int divide_ns(uint64_t ns, unsigned int timebase,
- unsigned int round_mode)
-{
- uint64_t div;
- unsigned int rem;
-
- div = ns;
- rem = do_div(div, timebase);
- round_mode &= TRIG_ROUND_MASK;
- switch (round_mode) {
- default:
- case TRIG_ROUND_NEAREST:
- div += (rem + (timebase / 2)) / timebase;
- break;
- case TRIG_ROUND_DOWN:
- break;
- case TRIG_ROUND_UP:
- div += (rem + timebase - 1) / timebase;
- break;
- }
- return div > UINT_MAX ? UINT_MAX : (unsigned int)div;
-}
-
-/* Given desired period in ns, returns the required internal clock source
- * and gets the initial count. */
-static unsigned int pci230_choose_clk_count(uint64_t ns, unsigned int *count,
- unsigned int round_mode)
-{
- unsigned int clk_src, cnt;
-
- for (clk_src = CLK_10MHZ;; clk_src++) {
- cnt = divide_ns(ns, pci230_timebase[clk_src], round_mode);
- if ((cnt <= 65536) || (clk_src == CLK_1KHZ))
- break;
-
- }
- *count = cnt;
- return clk_src;
-}
-
-static void pci230_ns_to_single_timer(unsigned int *ns, unsigned int round)
-{
- unsigned int count;
- unsigned int clk_src;
-
- clk_src = pci230_choose_clk_count(*ns, &count, round);
- *ns = count * pci230_timebase[clk_src];
- return;
-}
-
-static void pci230_ct_setup_ns_mode(struct comedi_device *dev, unsigned int ct,
- unsigned int mode, uint64_t ns,
- unsigned int round)
-{
- struct pci230_private *devpriv = dev->private;
- unsigned int clk_src;
- unsigned int count;
-
- /* Set mode. */
- i8254_set_mode(devpriv->iobase1 + PCI230_Z2_CT_BASE, 0, ct, mode);
- /* Determine clock source and count. */
- clk_src = pci230_choose_clk_count(ns, &count, round);
- /* Program clock source. */
- outb(CLK_CONFIG(ct, clk_src), devpriv->iobase1 + PCI230_ZCLK_SCE);
- /* Set initial count. */
- if (count >= 65536)
- count = 0;
-
- i8254_write(devpriv->iobase1 + PCI230_Z2_CT_BASE, 0, ct, count);
-}
-
-static void pci230_cancel_ct(struct comedi_device *dev, unsigned int ct)
-{
- struct pci230_private *devpriv = dev->private;
-
- i8254_set_mode(devpriv->iobase1 + PCI230_Z2_CT_BASE, 0, ct,
- I8254_MODE1);
- /* Counter ct, 8254 mode 1, initial count not written. */
-}
-
/* Interrupt handler */
static irqreturn_t pci230_interrupt(int irq, void *d)
{