[PATCH] hostap update
pcmcia id_table for hostap_cs.c
Hi Jouni,
Here's a patch for adding a pcmcia id_table to hostap_cs.c as introduced
by the PCMCIA subsystem changes in linux-2.6.13-rc1. The id_table allows
hotplug (along with pcmciautils [1]) to load the driver without the need
for the pcmcia-cs cardmgr daemon.
The id_table was generated from the CVS version of hostap_cs.conf using
a script borrowed from Dominik Brodowski. I have removed any duplicate
entries, but I have only been able to test the functionality of the
patch with a Linksys WPC11v3.
Sincerely,
Brix
[1]: http://www.kernel.org/pub/linux/utils/kernel/pcmcia/
Signed-off-by: Jouni Malinen <jkmaline@cc.hut.fi>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c
index 6495024..36b80ce 100644
--- a/drivers/net/wireless/hostap/hostap_cs.c
+++ b/drivers/net/wireless/hostap/hostap_cs.c
@@ -905,6 +905,57 @@
}
+static struct pcmcia_device_id hostap_cs_ids[] = {
+ PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7100),
+ PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7300),
+ PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0777),
+ PCMCIA_DEVICE_MANF_CARD(0x0126, 0x8000),
+ PCMCIA_DEVICE_MANF_CARD(0x0138, 0x0002),
+ PCMCIA_DEVICE_MANF_CARD(0x0156, 0x0002),
+ PCMCIA_DEVICE_MANF_CARD(0x0250, 0x0002),
+ PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1612),
+ PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1613),
+ PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0002),
+ PCMCIA_DEVICE_MANF_CARD(0x02aa, 0x0002),
+ PCMCIA_DEVICE_MANF_CARD(0x02d2, 0x0001),
+ PCMCIA_DEVICE_MANF_CARD(0x50c2, 0x0001),
+ PCMCIA_DEVICE_MANF_CARD(0x50c2, 0x7300),
+ PCMCIA_DEVICE_MANF_CARD(0xc00f, 0x0000),
+ PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0002),
+ PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0005),
+ PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0010),
+ PCMCIA_MFC_DEVICE_PROD_ID12(0, "SanDisk", "ConnectPlus",
+ 0x7a954bd9, 0x74be00c6),
+ PCMCIA_DEVICE_PROD_ID1234(
+ "Intersil", "PRISM 2_5 PCMCIA ADAPTER", "ISL37300P",
+ "Eval-RevA",
+ 0x4b801a17, 0x6345a0bf, 0xc9049a39, 0xc23adc0e),
+ PCMCIA_DEVICE_PROD_ID123(
+ "Addtron", "AWP-100 Wireless PCMCIA", "Version 01.02",
+ 0xe6ec52ce, 0x08649af2, 0x4b74baa0),
+ PCMCIA_DEVICE_PROD_ID123(
+ "D", "Link DWL-650 11Mbps WLAN Card", "Version 01.02",
+ 0x71b18589, 0xb6f1b0ab, 0x4b74baa0),
+ PCMCIA_DEVICE_PROD_ID123(
+ "Instant Wireless ", " Network PC CARD", "Version 01.02",
+ 0x11d901af, 0x6e9bd926, 0x4b74baa0),
+ PCMCIA_DEVICE_PROD_ID123(
+ "SMC", "SMC2632W", "Version 01.02",
+ 0xc4f8b18b, 0x474a1f2a, 0x4b74baa0),
+ PCMCIA_DEVICE_PROD_ID12("Compaq", "WL200_11Mbps_Wireless_PCI_Card",
+ 0x54f7c49c, 0x15a75e5b),
+ PCMCIA_DEVICE_PROD_ID12("INTERSIL", "HFA384x/IEEE",
+ 0x74c5e40d, 0xdb472a18),
+ PCMCIA_DEVICE_PROD_ID12("Linksys", "Wireless CompactFlash Card",
+ 0x0733cc81, 0x0c52f395),
+ PCMCIA_DEVICE_PROD_ID12(
+ "ZoomAir 11Mbps High", "Rate wireless Networking",
+ 0x273fe3db, 0x32a1eaee),
+ PCMCIA_DEVICE_NULL
+};
+MODULE_DEVICE_TABLE(pcmcia, hostap_cs_ids);
+
+
static struct pcmcia_driver hostap_driver = {
.drv = {
.name = "hostap_cs",
@@ -913,6 +964,7 @@
.detach = prism2_detach,
.owner = THIS_MODULE,
.event = prism2_event,
+ .id_table = hostap_cs_ids,
};
static int __init init_prism2_pccard(void)