| /* airport.c |
| * |
| * A driver for "Hermes" chipset based Apple Airport wireless |
| * card. |
| * |
| * Copyright notice & release notes in file orinoco.c |
| * |
| * Note specific to airport stub: |
| * |
| * 0.05 : first version of the new split driver |
| * 0.06 : fix possible hang on powerup, add sleep support |
| */ |
| |
| #define DRIVER_NAME "airport" |
| #define PFX DRIVER_NAME ": " |
| |
| #include <linux/config.h> |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/ptrace.h> |
| #include <linux/slab.h> |
| #include <linux/string.h> |
| #include <linux/timer.h> |
| #include <linux/ioport.h> |
| #include <linux/netdevice.h> |
| #include <linux/if_arp.h> |
| #include <linux/etherdevice.h> |
| #include <linux/wireless.h> |
| |
| #include <asm/io.h> |
| #include <asm/system.h> |
| #include <asm/current.h> |
| #include <asm/prom.h> |
| #include <asm/machdep.h> |
| #include <asm/pmac_feature.h> |
| #include <asm/irq.h> |
| #include <asm/uaccess.h> |
| |
| #include "orinoco.h" |
| |
| #define AIRPORT_IO_LEN (0x1000) /* one page */ |
| |
| struct airport { |
| struct macio_dev *mdev; |
| void __iomem *vaddr; |
| int irq_requested; |
| int ndev_registered; |
| }; |
| |
| static int |
| airport_suspend(struct macio_dev *mdev, pm_message_t state) |
| { |
| struct net_device *dev = dev_get_drvdata(&mdev->ofdev.dev); |
| struct orinoco_private *priv = netdev_priv(dev); |
| unsigned long flags; |
| int err; |
| |
| printk(KERN_DEBUG "%s: Airport entering sleep mode\n", dev->name); |
| |
| err = orinoco_lock(priv, &flags); |
| if (err) { |
| printk(KERN_ERR "%s: hw_unavailable on PBOOK_SLEEP_NOW\n", |
| dev->name); |
| return 0; |
| } |
| |
| err = __orinoco_down(dev); |
| if (err) |
| printk(KERN_WARNING "%s: PBOOK_SLEEP_NOW: Error %d downing interface\n", |
| dev->name, err); |
| |
| netif_device_detach(dev); |
| |
| priv->hw_unavailable++; |
| |
| orinoco_unlock(priv, &flags); |
| |
| disable_irq(dev->irq); |
| pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE, macio_get_of_node(mdev), 0, 0); |
| |
| return 0; |
| } |
| |
| static int |
| airport_resume(struct macio_dev *mdev) |
| { |
| struct net_device *dev = dev_get_drvdata(&mdev->ofdev.dev); |
| struct orinoco_private *priv = netdev_priv(dev); |
| unsigned long flags; |
| int err; |
| |
| printk(KERN_DEBUG "%s: Airport waking up\n", dev->name); |
| |
| pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE, macio_get_of_node(mdev), 0, 1); |
| msleep(200); |
| |
| enable_irq(dev->irq); |
| |
| err = orinoco_reinit_firmware(dev); |
| if (err) { |
| printk(KERN_ERR "%s: Error %d re-initializing firmware on PBOOK_WAKE\n", |
| dev->name, err); |
| return 0; |
| } |
| |
| spin_lock_irqsave(&priv->lock, flags); |
| |
| netif_device_attach(dev); |
| |
| priv->hw_unavailable--; |
| |
| if (priv->open && (! priv->hw_unavailable)) { |
| err = __orinoco_up(dev); |
| if (err) |
| printk(KERN_ERR "%s: Error %d restarting card on PBOOK_WAKE\n", |
| dev->name, err); |
| } |
| |
| |
| spin_unlock_irqrestore(&priv->lock, flags); |
| |
| return 0; |
| } |
| |
| static int |
| airport_detach(struct macio_dev *mdev) |
| { |
| struct net_device *dev = dev_get_drvdata(&mdev->ofdev.dev); |
| struct orinoco_private *priv = netdev_priv(dev); |
| struct airport *card = priv->card; |
| |
| if (card->ndev_registered) |
| unregister_netdev(dev); |
| card->ndev_registered = 0; |
| |
| if (card->irq_requested) |
| free_irq(dev->irq, dev); |
| card->irq_requested = 0; |
| |
| if (card->vaddr) |
| iounmap(card->vaddr); |
| card->vaddr = NULL; |
| |
| macio_release_resource(mdev, 0); |
| |
| pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE, macio_get_of_node(mdev), 0, 0); |
| ssleep(1); |
| |
| macio_set_drvdata(mdev, NULL); |
| free_orinocodev(dev); |
| |
| return 0; |
| } |
| |
| static int airport_hard_reset(struct orinoco_private *priv) |
| { |
| /* It would be nice to power cycle the Airport for a real hard |
| * reset, but for some reason although it appears to |
| * re-initialize properly, it falls in a screaming heap |
| * shortly afterwards. */ |
| #if 0 |
| struct net_device *dev = priv->ndev; |
| struct airport *card = priv->card; |
| |
| /* Vitally important. If we don't do this it seems we get an |
| * interrupt somewhere during the power cycle, since |
| * hw_unavailable is already set it doesn't get ACKed, we get |
| * into an interrupt loop and the the PMU decides to turn us |
| * off. */ |
| disable_irq(dev->irq); |
| |
| pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE, macio_get_of_node(card->mdev), 0, 0); |
| ssleep(1); |
| pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE, macio_get_of_node(card->mdev), 0, 1); |
| ssleep(1); |
| |
| enable_irq(dev->irq); |
| ssleep(1); |
| #endif |
| |
| return 0; |
| } |
| |
| static int |
| airport_attach(struct macio_dev *mdev, const struct of_device_id *match) |
| { |
| struct orinoco_private *priv; |
| struct net_device *dev; |
| struct airport *card; |
| unsigned long phys_addr; |
| hermes_t *hw; |
| |
| if (macio_resource_count(mdev) < 1 || macio_irq_count(mdev) < 1) { |
| printk(KERN_ERR PFX "Wrong interrupt/addresses in OF tree\n"); |
| return -ENODEV; |
| } |
| |
| /* Allocate space for private device-specific data */ |
| dev = alloc_orinocodev(sizeof(*card), airport_hard_reset); |
| if (! dev) { |
| printk(KERN_ERR PFX "Cannot allocate network device\n"); |
| return -ENODEV; |
| } |
| priv = netdev_priv(dev); |
| card = priv->card; |
| |
| hw = &priv->hw; |
| card->mdev = mdev; |
| |
| if (macio_request_resource(mdev, 0, "airport")) { |
| printk(KERN_ERR PFX "can't request IO resource !\n"); |
| free_orinocodev(dev); |
| return -EBUSY; |
| } |
| |
| SET_MODULE_OWNER(dev); |
| SET_NETDEV_DEV(dev, &mdev->ofdev.dev); |
| |
| macio_set_drvdata(mdev, dev); |
| |
| /* Setup interrupts & base address */ |
| dev->irq = macio_irq(mdev, 0); |
| phys_addr = macio_resource_start(mdev, 0); /* Physical address */ |
| printk(KERN_DEBUG PFX "Physical address %lx\n", phys_addr); |
| dev->base_addr = phys_addr; |
| card->vaddr = ioremap(phys_addr, AIRPORT_IO_LEN); |
| if (!card->vaddr) { |
| printk(KERN_ERR PFX "ioremap() failed\n"); |
| goto failed; |
| } |
| |
| hermes_struct_init(hw, card->vaddr, HERMES_16BIT_REGSPACING); |
| |
| /* Power up card */ |
| pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE, macio_get_of_node(mdev), 0, 1); |
| ssleep(1); |
| |
| /* Reset it before we get the interrupt */ |
| hermes_init(hw); |
| |
| if (request_irq(dev->irq, orinoco_interrupt, 0, dev->name, dev)) { |
| printk(KERN_ERR PFX "Couldn't get IRQ %d\n", dev->irq); |
| goto failed; |
| } |
| card->irq_requested = 1; |
| |
| /* Tell the stack we exist */ |
| if (register_netdev(dev) != 0) { |
| printk(KERN_ERR PFX "register_netdev() failed\n"); |
| goto failed; |
| } |
| printk(KERN_DEBUG PFX "Card registered for interface %s\n", dev->name); |
| card->ndev_registered = 1; |
| return 0; |
| failed: |
| airport_detach(mdev); |
| return -ENODEV; |
| } /* airport_attach */ |
| |
| |
| static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION |
| " (Benjamin Herrenschmidt <benh@kernel.crashing.org>)"; |
| MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>"); |
| MODULE_DESCRIPTION("Driver for the Apple Airport wireless card."); |
| MODULE_LICENSE("Dual MPL/GPL"); |
| |
| static struct of_device_id airport_match[] = |
| { |
| { |
| .name = "radio", |
| }, |
| {}, |
| }; |
| |
| MODULE_DEVICE_TABLE (of, airport_match); |
| |
| static struct macio_driver airport_driver = |
| { |
| .name = DRIVER_NAME, |
| .match_table = airport_match, |
| .probe = airport_attach, |
| .remove = airport_detach, |
| .suspend = airport_suspend, |
| .resume = airport_resume, |
| }; |
| |
| static int __init |
| init_airport(void) |
| { |
| printk(KERN_DEBUG "%s\n", version); |
| |
| return macio_register_driver(&airport_driver); |
| } |
| |
| static void __exit |
| exit_airport(void) |
| { |
| return macio_unregister_driver(&airport_driver); |
| } |
| |
| module_init(init_airport); |
| module_exit(exit_airport); |