mac80211: Fix HT channel selection
HT management is done differently for AP and STA modes, unify
to just the ->config() callback since HT is fundamentally a
PHY property and cannot be per-BSS.
Rename enum nl80211_sec_chan_offset as nl80211_channel_type to denote
the channel type ( NO_HT, HT20, HT40+, HT40- ).
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/ath9k/main.c b/drivers/net/wireless/ath9k/main.c
index 02e1771..e22fea1 100644
--- a/drivers/net/wireless/ath9k/main.c
+++ b/drivers/net/wireless/ath9k/main.c
@@ -623,37 +623,40 @@
return -1;
}
-/* ext_chan_offset: (-1, 0, 1) (below, none, above) */
-
static u32 ath_get_extchanmode(struct ath_softc *sc,
struct ieee80211_channel *chan,
- int ext_chan_offset,
- enum ath9k_ht_macmode tx_chan_width)
+ enum nl80211_channel_type channel_type)
{
u32 chanmode = 0;
switch (chan->band) {
case IEEE80211_BAND_2GHZ:
- if ((ext_chan_offset == 0) &&
- (tx_chan_width == ATH9K_HT_MACMODE_20))
+ switch(channel_type) {
+ case NL80211_CHAN_NO_HT:
+ case NL80211_CHAN_HT20:
chanmode = CHANNEL_G_HT20;
- if ((ext_chan_offset == 1) &&
- (tx_chan_width == ATH9K_HT_MACMODE_2040))
+ break;
+ case NL80211_CHAN_HT40PLUS:
chanmode = CHANNEL_G_HT40PLUS;
- if ((ext_chan_offset == -1) &&
- (tx_chan_width == ATH9K_HT_MACMODE_2040))
+ break;
+ case NL80211_CHAN_HT40MINUS:
chanmode = CHANNEL_G_HT40MINUS;
+ break;
+ }
break;
case IEEE80211_BAND_5GHZ:
- if ((ext_chan_offset == 0) &&
- (tx_chan_width == ATH9K_HT_MACMODE_20))
+ switch(channel_type) {
+ case NL80211_CHAN_NO_HT:
+ case NL80211_CHAN_HT20:
chanmode = CHANNEL_A_HT20;
- if ((ext_chan_offset == 1) &&
- (tx_chan_width == ATH9K_HT_MACMODE_2040))
+ break;
+ case NL80211_CHAN_HT40PLUS:
chanmode = CHANNEL_A_HT40PLUS;
- if ((ext_chan_offset == -1) &&
- (tx_chan_width == ATH9K_HT_MACMODE_2040))
+ break;
+ case NL80211_CHAN_HT40MINUS:
chanmode = CHANNEL_A_HT40MINUS;
+ break;
+ }
break;
default:
break;
@@ -829,45 +832,15 @@
ht_info->mcs.tx_params = IEEE80211_HT_MCS_TX_DEFINED;
}
-static void ath9k_ht_conf(struct ath_softc *sc,
- struct ieee80211_bss_conf *bss_conf)
-{
- if (sc->hw->conf.ht.enabled) {
- if (bss_conf->ht.width_40_ok)
- sc->tx_chan_width = ATH9K_HT_MACMODE_2040;
- else
- sc->tx_chan_width = ATH9K_HT_MACMODE_20;
-
- ath9k_hw_set11nmac2040(sc->sc_ah, sc->tx_chan_width);
-
- DPRINTF(sc, ATH_DBG_CONFIG,
- "BSS Changed HT, chanwidth: %d\n", sc->tx_chan_width);
- }
-}
-
-static inline int ath_sec_offset(u8 ext_offset)
-{
- if (ext_offset == IEEE80211_HT_PARAM_CHA_SEC_NONE)
- return 0;
- else if (ext_offset == IEEE80211_HT_PARAM_CHA_SEC_ABOVE)
- return 1;
- else if (ext_offset == IEEE80211_HT_PARAM_CHA_SEC_BELOW)
- return -1;
-
- return 0;
-}
-
static void ath9k_bss_assoc_info(struct ath_softc *sc,
struct ieee80211_vif *vif,
struct ieee80211_bss_conf *bss_conf)
{
- struct ieee80211_hw *hw = sc->hw;
- struct ieee80211_channel *curchan = hw->conf.channel;
struct ath_vap *avp = (void *)vif->drv_priv;
- int pos;
if (bss_conf->assoc) {
- DPRINTF(sc, ATH_DBG_CONFIG, "Bss Info ASSOC %d\n", bss_conf->aid);
+ DPRINTF(sc, ATH_DBG_CONFIG, "Bss Info ASSOC %d, bssid: %pM\n",
+ bss_conf->aid, sc->sc_curbssid);
/* New association, store aid */
if (avp->av_opmode == NL80211_IFTYPE_STATION) {
@@ -886,40 +859,6 @@
sc->sc_halstats.ns_avgtxrssi = ATH_RSSI_DUMMY_MARKER;
sc->sc_halstats.ns_avgtxrate = ATH_RATE_DUMMY_MARKER;
- /* Update chainmask */
- ath_update_chainmask(sc, hw->conf.ht.enabled);
-
- DPRINTF(sc, ATH_DBG_CONFIG,
- "bssid %pM aid 0x%x\n",
- sc->sc_curbssid, sc->sc_curaid);
-
- pos = ath_get_channel(sc, curchan);
- if (pos == -1) {
- DPRINTF(sc, ATH_DBG_FATAL,
- "Invalid channel: %d\n", curchan->center_freq);
- return;
- }
-
- if (hw->conf.ht.enabled) {
- int offset =
- ath_sec_offset(bss_conf->ht.secondary_channel_offset);
- sc->tx_chan_width = (bss_conf->ht.width_40_ok) ?
- ATH9K_HT_MACMODE_2040 : ATH9K_HT_MACMODE_20;
-
- sc->sc_ah->ah_channels[pos].chanmode =
- ath_get_extchanmode(sc, curchan,
- offset, sc->tx_chan_width);
- } else {
- sc->sc_ah->ah_channels[pos].chanmode =
- (curchan->band == IEEE80211_BAND_2GHZ) ?
- CHANNEL_G : CHANNEL_A;
- }
-
- /* set h/w channel */
- if (ath_set_channel(sc, &sc->sc_ah->ah_channels[pos]) < 0)
- DPRINTF(sc, ATH_DBG_FATAL, "Unable to set channel: %d\n",
- curchan->center_freq);
-
/* Start ANI */
mod_timer(&sc->sc_ani.timer,
jiffies + msecs_to_jiffies(ATH_ANI_POLLINTERVAL));
@@ -2146,7 +2085,8 @@
struct ath_softc *sc = hw->priv;
struct ieee80211_conf *conf = &hw->conf;
- if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
+ if (changed & (IEEE80211_CONF_CHANGE_CHANNEL |
+ IEEE80211_CONF_CHANGE_HT)) {
struct ieee80211_channel *curchan = hw->conf.channel;
int pos;
@@ -2165,25 +2105,23 @@
(curchan->band == IEEE80211_BAND_2GHZ) ?
CHANNEL_G : CHANNEL_A;
- if ((sc->sc_ah->ah_opmode == NL80211_IFTYPE_AP) &&
- (conf->ht.enabled)) {
- sc->tx_chan_width = (!!conf->ht.sec_chan_offset) ?
- ATH9K_HT_MACMODE_2040 : ATH9K_HT_MACMODE_20;
+ if (conf->ht.enabled) {
+ if (conf->ht.channel_type == NL80211_CHAN_HT40PLUS ||
+ conf->ht.channel_type == NL80211_CHAN_HT40MINUS)
+ sc->tx_chan_width = ATH9K_HT_MACMODE_2040;
sc->sc_ah->ah_channels[pos].chanmode =
ath_get_extchanmode(sc, curchan,
- conf->ht.sec_chan_offset,
- sc->tx_chan_width);
+ conf->ht.channel_type);
}
if (ath_set_channel(sc, &sc->sc_ah->ah_channels[pos]) < 0) {
DPRINTF(sc, ATH_DBG_FATAL, "Unable to set channel\n");
return -EINVAL;
}
- }
- if (changed & IEEE80211_CONF_CHANGE_HT)
ath_update_chainmask(sc, conf->ht.enabled);
+ }
if (changed & IEEE80211_CONF_CHANGE_POWER)
sc->sc_config.txpowlimit = 2 * conf->power_level;
@@ -2417,9 +2355,6 @@
sc->sc_flags &= ~SC_OP_PROTECT_ENABLE;
}
- if (changed & BSS_CHANGED_HT)
- ath9k_ht_conf(sc, bss_conf);
-
if (changed & BSS_CHANGED_ASSOC) {
DPRINTF(sc, ATH_DBG_CONFIG, "BSS Changed ASSOC %d\n",
bss_conf->assoc);
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index 2f5e86e..bbc1c80 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -515,19 +515,27 @@
iwl_conf->supported_chan_width =
!!(ht_conf->cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40);
- iwl_conf->extension_chan_offset = bss_conf->ht.secondary_channel_offset;
+ /*
+ * XXX: The HT configuration needs to be moved into iwl_mac_config()
+ * to be done there correctly.
+ */
+
+ iwl_conf->extension_chan_offset = IEEE80211_HT_PARAM_CHA_SEC_NONE;
+ if (priv->hw->conf.ht.channel_type == NL80211_CHAN_HT40MINUS)
+ iwl_conf->extension_chan_offset = IEEE80211_HT_PARAM_CHA_SEC_BELOW;
+ else if(priv->hw->conf.ht.channel_type == NL80211_CHAN_HT40PLUS)
+ iwl_conf->extension_chan_offset = IEEE80211_HT_PARAM_CHA_SEC_ABOVE;
+
/* If no above or below channel supplied disable FAT channel */
if (iwl_conf->extension_chan_offset != IEEE80211_HT_PARAM_CHA_SEC_ABOVE &&
- iwl_conf->extension_chan_offset != IEEE80211_HT_PARAM_CHA_SEC_BELOW) {
- iwl_conf->extension_chan_offset = IEEE80211_HT_PARAM_CHA_SEC_NONE;
+ iwl_conf->extension_chan_offset != IEEE80211_HT_PARAM_CHA_SEC_BELOW)
iwl_conf->supported_chan_width = 0;
- }
iwl_conf->sm_ps = (u8)((ht_conf->cap & IEEE80211_HT_CAP_SM_PS) >> 2);
memcpy(&iwl_conf->mcs, &ht_conf->mcs, 16);
- iwl_conf->tx_chan_width = bss_conf->ht.width_40_ok;
+ iwl_conf->tx_chan_width = iwl_conf->supported_chan_width != 0;
iwl_conf->ht_protection =
bss_conf->ht.operation_mode & IEEE80211_HT_OP_MODE_PROTECTION;
iwl_conf->non_GF_STA_present =
diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index fd5a537..f83d69e 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -495,11 +495,9 @@
}
if (changed & BSS_CHANGED_HT) {
- printk(KERN_DEBUG " %s: HT: sec_ch_offs=%d width_40_ok=%d "
- "op_mode=%d\n",
+ printk(KERN_DEBUG " %s: HT: op_mode=0x%x\n",
wiphy_name(hw->wiphy),
- info->ht.secondary_channel_offset,
- info->ht.width_40_ok, info->ht.operation_mode);
+ info->ht.operation_mode);
}
if (changed & BSS_CHANGED_BASIC_RATES) {