| /* |
| * linux/sound/arm/aaci.c - ARM PrimeCell AACI PL041 driver |
| * |
| * Copyright (C) 2003 Deep Blue Solutions Ltd, All Rights Reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * Documentation: ARM DDI 0173B |
| */ |
| #include <linux/module.h> |
| #include <linux/delay.h> |
| #include <linux/init.h> |
| #include <linux/ioport.h> |
| #include <linux/device.h> |
| #include <linux/spinlock.h> |
| #include <linux/interrupt.h> |
| #include <linux/err.h> |
| #include <linux/amba/bus.h> |
| |
| #include <asm/io.h> |
| #include <asm/irq.h> |
| #include <asm/sizes.h> |
| |
| #include <sound/driver.h> |
| #include <sound/core.h> |
| #include <sound/initval.h> |
| #include <sound/ac97_codec.h> |
| #include <sound/pcm.h> |
| #include <sound/pcm_params.h> |
| |
| #include "aaci.h" |
| #include "devdma.h" |
| |
| #define DRIVER_NAME "aaci-pl041" |
| |
| /* |
| * PM support is not complete. Turn it off. |
| */ |
| #undef CONFIG_PM |
| |
| static void aaci_ac97_select_codec(struct aaci *aaci, struct snd_ac97 *ac97) |
| { |
| u32 v, maincr = aaci->maincr | MAINCR_SCRA(ac97->num); |
| |
| /* |
| * Ensure that the slot 1/2 RX registers are empty. |
| */ |
| v = readl(aaci->base + AACI_SLFR); |
| if (v & SLFR_2RXV) |
| readl(aaci->base + AACI_SL2RX); |
| if (v & SLFR_1RXV) |
| readl(aaci->base + AACI_SL1RX); |
| |
| writel(maincr, aaci->base + AACI_MAINCR); |
| } |
| |
| /* |
| * P29: |
| * The recommended use of programming the external codec through slot 1 |
| * and slot 2 data is to use the channels during setup routines and the |
| * slot register at any other time. The data written into slot 1, slot 2 |
| * and slot 12 registers is transmitted only when their corresponding |
| * SI1TxEn, SI2TxEn and SI12TxEn bits are set in the AACI_MAINCR |
| * register. |
| */ |
| static void aaci_ac97_write(struct snd_ac97 *ac97, unsigned short reg, unsigned short val) |
| { |
| struct aaci *aaci = ac97->private_data; |
| u32 v; |
| |
| if (ac97->num >= 4) |
| return; |
| |
| mutex_lock(&aaci->ac97_sem); |
| |
| aaci_ac97_select_codec(aaci, ac97); |
| |
| /* |
| * P54: You must ensure that AACI_SL2TX is always written |
| * to, if required, before data is written to AACI_SL1TX. |
| */ |
| writel(val << 4, aaci->base + AACI_SL2TX); |
| writel(reg << 12, aaci->base + AACI_SL1TX); |
| |
| /* |
| * Wait for the transmission of both slots to complete. |
| */ |
| do { |
| v = readl(aaci->base + AACI_SLFR); |
| } while (v & (SLFR_1TXB|SLFR_2TXB)); |
| |
| mutex_unlock(&aaci->ac97_sem); |
| } |
| |
| /* |
| * Read an AC'97 register. |
| */ |
| static unsigned short aaci_ac97_read(struct snd_ac97 *ac97, unsigned short reg) |
| { |
| struct aaci *aaci = ac97->private_data; |
| u32 v; |
| |
| if (ac97->num >= 4) |
| return ~0; |
| |
| mutex_lock(&aaci->ac97_sem); |
| |
| aaci_ac97_select_codec(aaci, ac97); |
| |
| /* |
| * Write the register address to slot 1. |
| */ |
| writel((reg << 12) | (1 << 19), aaci->base + AACI_SL1TX); |
| |
| /* |
| * Wait for the transmission to complete. |
| */ |
| do { |
| v = readl(aaci->base + AACI_SLFR); |
| } while (v & SLFR_1TXB); |
| |
| /* |
| * Give the AC'97 codec more than enough time |
| * to respond. (42us = ~2 frames at 48kHz.) |
| */ |
| udelay(42); |
| |
| /* |
| * Wait for slot 2 to indicate data. |
| */ |
| do { |
| cond_resched(); |
| v = readl(aaci->base + AACI_SLFR) & (SLFR_1RXV|SLFR_2RXV); |
| } while (v != (SLFR_1RXV|SLFR_2RXV)); |
| |
| v = readl(aaci->base + AACI_SL1RX) >> 12; |
| if (v == reg) { |
| v = readl(aaci->base + AACI_SL2RX) >> 4; |
| } else { |
| dev_err(&aaci->dev->dev, |
| "wrong ac97 register read back (%x != %x)\n", |
| v, reg); |
| v = ~0; |
| } |
| |
| mutex_unlock(&aaci->ac97_sem); |
| return v; |
| } |
| |
| static inline void aaci_chan_wait_ready(struct aaci_runtime *aacirun) |
| { |
| u32 val; |
| int timeout = 5000; |
| |
| do { |
| val = readl(aacirun->base + AACI_SR); |
| } while (val & (SR_TXB|SR_RXB) && timeout--); |
| } |
| |
| |
| |
| /* |
| * Interrupt support. |
| */ |
| static void aaci_fifo_irq(struct aaci *aaci, u32 mask) |
| { |
| if (mask & ISR_URINTR) { |
| writel(ICLR_TXUEC1, aaci->base + AACI_INTCLR); |
| } |
| |
| if (mask & ISR_TXINTR) { |
| struct aaci_runtime *aacirun = &aaci->playback; |
| void *ptr; |
| |
| if (!aacirun->substream || !aacirun->start) { |
| dev_warn(&aaci->dev->dev, "TX interrupt???"); |
| writel(0, aacirun->base + AACI_IE); |
| return; |
| } |
| |
| ptr = aacirun->ptr; |
| do { |
| unsigned int len = aacirun->fifosz; |
| u32 val; |
| |
| if (aacirun->bytes <= 0) { |
| aacirun->bytes += aacirun->period; |
| aacirun->ptr = ptr; |
| spin_unlock(&aaci->lock); |
| snd_pcm_period_elapsed(aacirun->substream); |
| spin_lock(&aaci->lock); |
| } |
| if (!(aacirun->cr & TXCR_TXEN)) |
| break; |
| |
| val = readl(aacirun->base + AACI_SR); |
| if (!(val & SR_TXHE)) |
| break; |
| if (!(val & SR_TXFE)) |
| len >>= 1; |
| |
| aacirun->bytes -= len; |
| |
| /* writing 16 bytes at a time */ |
| for ( ; len > 0; len -= 16) { |
| asm( |
| "ldmia %0!, {r0, r1, r2, r3}\n\t" |
| "stmia %1, {r0, r1, r2, r3}" |
| : "+r" (ptr) |
| : "r" (aacirun->fifo) |
| : "r0", "r1", "r2", "r3", "cc"); |
| |
| if (ptr >= aacirun->end) |
| ptr = aacirun->start; |
| } |
| } while (1); |
| |
| aacirun->ptr = ptr; |
| } |
| } |
| |
| static irqreturn_t aaci_irq(int irq, void *devid, struct pt_regs *regs) |
| { |
| struct aaci *aaci = devid; |
| u32 mask; |
| int i; |
| |
| spin_lock(&aaci->lock); |
| mask = readl(aaci->base + AACI_ALLINTS); |
| if (mask) { |
| u32 m = mask; |
| for (i = 0; i < 4; i++, m >>= 7) { |
| if (m & 0x7f) { |
| aaci_fifo_irq(aaci, m); |
| } |
| } |
| } |
| spin_unlock(&aaci->lock); |
| |
| return mask ? IRQ_HANDLED : IRQ_NONE; |
| } |
| |
| |
| |
| /* |
| * ALSA support. |
| */ |
| |
| struct aaci_stream { |
| unsigned char codec_idx; |
| unsigned char rate_idx; |
| }; |
| |
| static struct aaci_stream aaci_streams[] = { |
| [ACSTREAM_FRONT] = { |
| .codec_idx = 0, |
| .rate_idx = AC97_RATES_FRONT_DAC, |
| }, |
| [ACSTREAM_SURROUND] = { |
| .codec_idx = 0, |
| .rate_idx = AC97_RATES_SURR_DAC, |
| }, |
| [ACSTREAM_LFE] = { |
| .codec_idx = 0, |
| .rate_idx = AC97_RATES_LFE_DAC, |
| }, |
| }; |
| |
| static inline unsigned int aaci_rate_mask(struct aaci *aaci, int streamid) |
| { |
| struct aaci_stream *s = aaci_streams + streamid; |
| return aaci->ac97_bus->codec[s->codec_idx]->rates[s->rate_idx]; |
| } |
| |
| static unsigned int rate_list[] = { |
| 5512, 8000, 11025, 16000, 22050, 32000, 44100, |
| 48000, 64000, 88200, 96000, 176400, 192000 |
| }; |
| |
| /* |
| * Double-rate rule: we can support double rate iff channels == 2 |
| * (unimplemented) |
| */ |
| static int |
| aaci_rule_rate_by_channels(struct snd_pcm_hw_params *p, struct snd_pcm_hw_rule *rule) |
| { |
| struct aaci *aaci = rule->private; |
| unsigned int rate_mask = SNDRV_PCM_RATE_8000_48000|SNDRV_PCM_RATE_5512; |
| struct snd_interval *c = hw_param_interval(p, SNDRV_PCM_HW_PARAM_CHANNELS); |
| |
| switch (c->max) { |
| case 6: |
| rate_mask &= aaci_rate_mask(aaci, ACSTREAM_LFE); |
| case 4: |
| rate_mask &= aaci_rate_mask(aaci, ACSTREAM_SURROUND); |
| case 2: |
| rate_mask &= aaci_rate_mask(aaci, ACSTREAM_FRONT); |
| } |
| |
| return snd_interval_list(hw_param_interval(p, rule->var), |
| ARRAY_SIZE(rate_list), rate_list, |
| rate_mask); |
| } |
| |
| static struct snd_pcm_hardware aaci_hw_info = { |
| .info = SNDRV_PCM_INFO_MMAP | |
| SNDRV_PCM_INFO_MMAP_VALID | |
| SNDRV_PCM_INFO_INTERLEAVED | |
| SNDRV_PCM_INFO_BLOCK_TRANSFER | |
| SNDRV_PCM_INFO_RESUME, |
| |
| /* |
| * ALSA doesn't support 18-bit or 20-bit packed into 32-bit |
| * words. It also doesn't support 12-bit at all. |
| */ |
| .formats = SNDRV_PCM_FMTBIT_S16_LE, |
| |
| /* should this be continuous or knot? */ |
| .rates = SNDRV_PCM_RATE_CONTINUOUS, |
| .rate_max = 48000, |
| .rate_min = 4000, |
| .channels_min = 2, |
| .channels_max = 6, |
| .buffer_bytes_max = 64 * 1024, |
| .period_bytes_min = 256, |
| .period_bytes_max = PAGE_SIZE, |
| .periods_min = 4, |
| .periods_max = PAGE_SIZE / 16, |
| }; |
| |
| static int aaci_pcm_open(struct aaci *aaci, struct snd_pcm_substream *substream, |
| struct aaci_runtime *aacirun) |
| { |
| struct snd_pcm_runtime *runtime = substream->runtime; |
| int ret; |
| |
| aacirun->substream = substream; |
| runtime->private_data = aacirun; |
| runtime->hw = aaci_hw_info; |
| |
| /* |
| * FIXME: ALSA specifies fifo_size in bytes. If we're in normal |
| * mode, each 32-bit word contains one sample. If we're in |
| * compact mode, each 32-bit word contains two samples, effectively |
| * halving the FIFO size. However, we don't know for sure which |
| * we'll be using at this point. We set this to the lower limit. |
| */ |
| runtime->hw.fifo_size = aaci->fifosize * 2; |
| |
| /* |
| * Add rule describing hardware rate dependency |
| * on the number of channels. |
| */ |
| ret = snd_pcm_hw_rule_add(runtime, 0, SNDRV_PCM_HW_PARAM_RATE, |
| aaci_rule_rate_by_channels, aaci, |
| SNDRV_PCM_HW_PARAM_CHANNELS, |
| SNDRV_PCM_HW_PARAM_RATE, -1); |
| if (ret) |
| goto out; |
| |
| ret = request_irq(aaci->dev->irq[0], aaci_irq, SA_SHIRQ|SA_INTERRUPT, |
| DRIVER_NAME, aaci); |
| if (ret) |
| goto out; |
| |
| return 0; |
| |
| out: |
| return ret; |
| } |
| |
| |
| /* |
| * Common ALSA stuff |
| */ |
| static int aaci_pcm_close(struct snd_pcm_substream *substream) |
| { |
| struct aaci *aaci = substream->private_data; |
| struct aaci_runtime *aacirun = substream->runtime->private_data; |
| |
| WARN_ON(aacirun->cr & TXCR_TXEN); |
| |
| aacirun->substream = NULL; |
| free_irq(aaci->dev->irq[0], aaci); |
| |
| return 0; |
| } |
| |
| static int aaci_pcm_hw_free(struct snd_pcm_substream *substream) |
| { |
| struct aaci_runtime *aacirun = substream->runtime->private_data; |
| |
| /* |
| * This must not be called with the device enabled. |
| */ |
| WARN_ON(aacirun->cr & TXCR_TXEN); |
| |
| if (aacirun->pcm_open) |
| snd_ac97_pcm_close(aacirun->pcm); |
| aacirun->pcm_open = 0; |
| |
| /* |
| * Clear out the DMA and any allocated buffers. |
| */ |
| devdma_hw_free(NULL, substream); |
| |
| return 0; |
| } |
| |
| static int aaci_pcm_hw_params(struct snd_pcm_substream *substream, |
| struct aaci_runtime *aacirun, |
| struct snd_pcm_hw_params *params) |
| { |
| int err; |
| |
| aaci_pcm_hw_free(substream); |
| |
| err = devdma_hw_alloc(NULL, substream, |
| params_buffer_bytes(params)); |
| if (err < 0) |
| goto out; |
| |
| err = snd_ac97_pcm_open(aacirun->pcm, params_rate(params), |
| params_channels(params), |
| aacirun->pcm->r[0].slots); |
| if (err) |
| goto out; |
| |
| aacirun->pcm_open = 1; |
| |
| out: |
| return err; |
| } |
| |
| static int aaci_pcm_prepare(struct snd_pcm_substream *substream) |
| { |
| struct snd_pcm_runtime *runtime = substream->runtime; |
| struct aaci_runtime *aacirun = runtime->private_data; |
| |
| aacirun->start = (void *)runtime->dma_area; |
| aacirun->end = aacirun->start + runtime->dma_bytes; |
| aacirun->ptr = aacirun->start; |
| aacirun->period = |
| aacirun->bytes = frames_to_bytes(runtime, runtime->period_size); |
| |
| return 0; |
| } |
| |
| static snd_pcm_uframes_t aaci_pcm_pointer(struct snd_pcm_substream *substream) |
| { |
| struct snd_pcm_runtime *runtime = substream->runtime; |
| struct aaci_runtime *aacirun = runtime->private_data; |
| ssize_t bytes = aacirun->ptr - aacirun->start; |
| |
| return bytes_to_frames(runtime, bytes); |
| } |
| |
| static int aaci_pcm_mmap(struct snd_pcm_substream *substream, struct vm_area_struct *vma) |
| { |
| return devdma_mmap(NULL, substream, vma); |
| } |
| |
| |
| /* |
| * Playback specific ALSA stuff |
| */ |
| static const u32 channels_to_txmask[] = { |
| [2] = TXCR_TX3 | TXCR_TX4, |
| [4] = TXCR_TX3 | TXCR_TX4 | TXCR_TX7 | TXCR_TX8, |
| [6] = TXCR_TX3 | TXCR_TX4 | TXCR_TX7 | TXCR_TX8 | TXCR_TX6 | TXCR_TX9, |
| }; |
| |
| /* |
| * We can support two and four channel audio. Unfortunately |
| * six channel audio requires a non-standard channel ordering: |
| * 2 -> FL(3), FR(4) |
| * 4 -> FL(3), FR(4), SL(7), SR(8) |
| * 6 -> FL(3), FR(4), SL(7), SR(8), C(6), LFE(9) (required) |
| * FL(3), FR(4), C(6), SL(7), SR(8), LFE(9) (actual) |
| * This requires an ALSA configuration file to correct. |
| */ |
| static unsigned int channel_list[] = { 2, 4, 6 }; |
| |
| static int |
| aaci_rule_channels(struct snd_pcm_hw_params *p, struct snd_pcm_hw_rule *rule) |
| { |
| struct aaci *aaci = rule->private; |
| unsigned int chan_mask = 1 << 0, slots; |
| |
| /* |
| * pcms[0] is the our 5.1 PCM instance. |
| */ |
| slots = aaci->ac97_bus->pcms[0].r[0].slots; |
| if (slots & (1 << AC97_SLOT_PCM_SLEFT)) { |
| chan_mask |= 1 << 1; |
| if (slots & (1 << AC97_SLOT_LFE)) |
| chan_mask |= 1 << 2; |
| } |
| |
| return snd_interval_list(hw_param_interval(p, rule->var), |
| ARRAY_SIZE(channel_list), channel_list, |
| chan_mask); |
| } |
| |
| static int aaci_pcm_playback_open(struct snd_pcm_substream *substream) |
| { |
| struct aaci *aaci = substream->private_data; |
| int ret; |
| |
| /* |
| * Add rule describing channel dependency. |
| */ |
| ret = snd_pcm_hw_rule_add(substream->runtime, 0, |
| SNDRV_PCM_HW_PARAM_CHANNELS, |
| aaci_rule_channels, aaci, |
| SNDRV_PCM_HW_PARAM_CHANNELS, -1); |
| if (ret) |
| return ret; |
| |
| return aaci_pcm_open(aaci, substream, &aaci->playback); |
| } |
| |
| static int aaci_pcm_playback_hw_params(struct snd_pcm_substream *substream, |
| struct snd_pcm_hw_params *params) |
| { |
| struct aaci *aaci = substream->private_data; |
| struct aaci_runtime *aacirun = substream->runtime->private_data; |
| unsigned int channels = params_channels(params); |
| int ret; |
| |
| WARN_ON(channels >= ARRAY_SIZE(channels_to_txmask) || |
| !channels_to_txmask[channels]); |
| |
| ret = aaci_pcm_hw_params(substream, aacirun, params); |
| |
| /* |
| * Enable FIFO, compact mode, 16 bits per sample. |
| * FIXME: double rate slots? |
| */ |
| if (ret >= 0) { |
| aacirun->cr = TXCR_FEN | TXCR_COMPACT | TXCR_TSZ16; |
| aacirun->cr |= channels_to_txmask[channels]; |
| |
| aacirun->fifosz = aaci->fifosize * 4; |
| if (aacirun->cr & TXCR_COMPACT) |
| aacirun->fifosz >>= 1; |
| } |
| return ret; |
| } |
| |
| static void aaci_pcm_playback_stop(struct aaci_runtime *aacirun) |
| { |
| u32 ie; |
| |
| ie = readl(aacirun->base + AACI_IE); |
| ie &= ~(IE_URIE|IE_TXIE); |
| writel(ie, aacirun->base + AACI_IE); |
| aacirun->cr &= ~TXCR_TXEN; |
| aaci_chan_wait_ready(aacirun); |
| writel(aacirun->cr, aacirun->base + AACI_TXCR); |
| } |
| |
| static void aaci_pcm_playback_start(struct aaci_runtime *aacirun) |
| { |
| u32 ie; |
| |
| aaci_chan_wait_ready(aacirun); |
| aacirun->cr |= TXCR_TXEN; |
| |
| ie = readl(aacirun->base + AACI_IE); |
| ie |= IE_URIE | IE_TXIE; |
| writel(ie, aacirun->base + AACI_IE); |
| writel(aacirun->cr, aacirun->base + AACI_TXCR); |
| } |
| |
| static int aaci_pcm_playback_trigger(struct snd_pcm_substream *substream, int cmd) |
| { |
| struct aaci *aaci = substream->private_data; |
| struct aaci_runtime *aacirun = substream->runtime->private_data; |
| unsigned long flags; |
| int ret = 0; |
| |
| spin_lock_irqsave(&aaci->lock, flags); |
| switch (cmd) { |
| case SNDRV_PCM_TRIGGER_START: |
| aaci_pcm_playback_start(aacirun); |
| break; |
| |
| case SNDRV_PCM_TRIGGER_RESUME: |
| aaci_pcm_playback_start(aacirun); |
| break; |
| |
| case SNDRV_PCM_TRIGGER_STOP: |
| aaci_pcm_playback_stop(aacirun); |
| break; |
| |
| case SNDRV_PCM_TRIGGER_SUSPEND: |
| aaci_pcm_playback_stop(aacirun); |
| break; |
| |
| case SNDRV_PCM_TRIGGER_PAUSE_PUSH: |
| break; |
| |
| case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: |
| break; |
| |
| default: |
| ret = -EINVAL; |
| } |
| spin_unlock_irqrestore(&aaci->lock, flags); |
| |
| return ret; |
| } |
| |
| static struct snd_pcm_ops aaci_playback_ops = { |
| .open = aaci_pcm_playback_open, |
| .close = aaci_pcm_close, |
| .ioctl = snd_pcm_lib_ioctl, |
| .hw_params = aaci_pcm_playback_hw_params, |
| .hw_free = aaci_pcm_hw_free, |
| .prepare = aaci_pcm_prepare, |
| .trigger = aaci_pcm_playback_trigger, |
| .pointer = aaci_pcm_pointer, |
| .mmap = aaci_pcm_mmap, |
| }; |
| |
| |
| |
| /* |
| * Power Management. |
| */ |
| #ifdef CONFIG_PM |
| static int aaci_do_suspend(struct snd_card *card, unsigned int state) |
| { |
| struct aaci *aaci = card->private_data; |
| snd_power_change_state(card, SNDRV_CTL_POWER_D3cold); |
| snd_pcm_suspend_all(aaci->pcm); |
| return 0; |
| } |
| |
| static int aaci_do_resume(struct snd_card *card, unsigned int state) |
| { |
| snd_power_change_state(card, SNDRV_CTL_POWER_D0); |
| return 0; |
| } |
| |
| static int aaci_suspend(struct amba_device *dev, pm_message_t state) |
| { |
| struct snd_card *card = amba_get_drvdata(dev); |
| return card ? aaci_do_suspend(card) : 0; |
| } |
| |
| static int aaci_resume(struct amba_device *dev) |
| { |
| struct snd_card *card = amba_get_drvdata(dev); |
| return card ? aaci_do_resume(card) : 0; |
| } |
| #else |
| #define aaci_do_suspend NULL |
| #define aaci_do_resume NULL |
| #define aaci_suspend NULL |
| #define aaci_resume NULL |
| #endif |
| |
| |
| static struct ac97_pcm ac97_defs[] __devinitdata = { |
| [0] = { /* Front PCM */ |
| .exclusive = 1, |
| .r = { |
| [0] = { |
| .slots = (1 << AC97_SLOT_PCM_LEFT) | |
| (1 << AC97_SLOT_PCM_RIGHT) | |
| (1 << AC97_SLOT_PCM_CENTER) | |
| (1 << AC97_SLOT_PCM_SLEFT) | |
| (1 << AC97_SLOT_PCM_SRIGHT) | |
| (1 << AC97_SLOT_LFE), |
| }, |
| }, |
| }, |
| [1] = { /* PCM in */ |
| .stream = 1, |
| .exclusive = 1, |
| .r = { |
| [0] = { |
| .slots = (1 << AC97_SLOT_PCM_LEFT) | |
| (1 << AC97_SLOT_PCM_RIGHT), |
| }, |
| }, |
| }, |
| [2] = { /* Mic in */ |
| .stream = 1, |
| .exclusive = 1, |
| .r = { |
| [0] = { |
| .slots = (1 << AC97_SLOT_MIC), |
| }, |
| }, |
| } |
| }; |
| |
| static struct snd_ac97_bus_ops aaci_bus_ops = { |
| .write = aaci_ac97_write, |
| .read = aaci_ac97_read, |
| }; |
| |
| static int __devinit aaci_probe_ac97(struct aaci *aaci) |
| { |
| struct snd_ac97_template ac97_template; |
| struct snd_ac97_bus *ac97_bus; |
| struct snd_ac97 *ac97; |
| int ret; |
| |
| /* |
| * Assert AACIRESET for 2us |
| */ |
| writel(0, aaci->base + AACI_RESET); |
| udelay(2); |
| writel(RESET_NRST, aaci->base + AACI_RESET); |
| |
| /* |
| * Give the AC'97 codec more than enough time |
| * to wake up. (42us = ~2 frames at 48kHz.) |
| */ |
| udelay(42); |
| |
| ret = snd_ac97_bus(aaci->card, 0, &aaci_bus_ops, aaci, &ac97_bus); |
| if (ret) |
| goto out; |
| |
| ac97_bus->clock = 48000; |
| aaci->ac97_bus = ac97_bus; |
| |
| memset(&ac97_template, 0, sizeof(struct snd_ac97_template)); |
| ac97_template.private_data = aaci; |
| ac97_template.num = 0; |
| ac97_template.scaps = AC97_SCAP_SKIP_MODEM; |
| |
| ret = snd_ac97_mixer(ac97_bus, &ac97_template, &ac97); |
| if (ret) |
| goto out; |
| |
| /* |
| * Disable AC97 PC Beep input on audio codecs. |
| */ |
| if (ac97_is_audio(ac97)) |
| snd_ac97_write_cache(ac97, AC97_PC_BEEP, 0x801e); |
| |
| ret = snd_ac97_pcm_assign(ac97_bus, ARRAY_SIZE(ac97_defs), ac97_defs); |
| if (ret) |
| goto out; |
| |
| aaci->playback.pcm = &ac97_bus->pcms[0]; |
| |
| out: |
| return ret; |
| } |
| |
| static void aaci_free_card(struct snd_card *card) |
| { |
| struct aaci *aaci = card->private_data; |
| if (aaci->base) |
| iounmap(aaci->base); |
| } |
| |
| static struct aaci * __devinit aaci_init_card(struct amba_device *dev) |
| { |
| struct aaci *aaci; |
| struct snd_card *card; |
| |
| card = snd_card_new(SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1, |
| THIS_MODULE, sizeof(struct aaci)); |
| if (card == NULL) |
| return ERR_PTR(-ENOMEM); |
| |
| card->private_free = aaci_free_card; |
| |
| strlcpy(card->driver, DRIVER_NAME, sizeof(card->driver)); |
| strlcpy(card->shortname, "ARM AC'97 Interface", sizeof(card->shortname)); |
| snprintf(card->longname, sizeof(card->longname), |
| "%s at 0x%016llx, irq %d", |
| card->shortname, (unsigned long long)dev->res.start, |
| dev->irq[0]); |
| |
| aaci = card->private_data; |
| mutex_init(&aaci->ac97_sem); |
| spin_lock_init(&aaci->lock); |
| aaci->card = card; |
| aaci->dev = dev; |
| |
| /* Set MAINCR to allow slot 1 and 2 data IO */ |
| aaci->maincr = MAINCR_IE | MAINCR_SL1RXEN | MAINCR_SL1TXEN | |
| MAINCR_SL2RXEN | MAINCR_SL2TXEN; |
| |
| return aaci; |
| } |
| |
| static int __devinit aaci_init_pcm(struct aaci *aaci) |
| { |
| struct snd_pcm *pcm; |
| int ret; |
| |
| ret = snd_pcm_new(aaci->card, "AACI AC'97", 0, 1, 0, &pcm); |
| if (ret == 0) { |
| aaci->pcm = pcm; |
| pcm->private_data = aaci; |
| pcm->info_flags = 0; |
| |
| strlcpy(pcm->name, DRIVER_NAME, sizeof(pcm->name)); |
| |
| snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &aaci_playback_ops); |
| } |
| |
| return ret; |
| } |
| |
| static unsigned int __devinit aaci_size_fifo(struct aaci *aaci) |
| { |
| void __iomem *base = aaci->base + AACI_CSCH1; |
| int i; |
| |
| writel(TXCR_FEN | TXCR_TSZ16 | TXCR_TXEN, base + AACI_TXCR); |
| |
| for (i = 0; !(readl(base + AACI_SR) & SR_TXFF) && i < 4096; i++) |
| writel(0, aaci->base + AACI_DR1); |
| |
| writel(0, base + AACI_TXCR); |
| |
| /* |
| * Re-initialise the AACI after the FIFO depth test, to |
| * ensure that the FIFOs are empty. Unfortunately, merely |
| * disabling the channel doesn't clear the FIFO. |
| */ |
| writel(aaci->maincr & ~MAINCR_IE, aaci->base + AACI_MAINCR); |
| writel(aaci->maincr, aaci->base + AACI_MAINCR); |
| |
| /* |
| * If we hit 4096, we failed. Go back to the specified |
| * fifo depth. |
| */ |
| if (i == 4096) |
| i = 8; |
| |
| return i; |
| } |
| |
| static int __devinit aaci_probe(struct amba_device *dev, void *id) |
| { |
| struct aaci *aaci; |
| int ret, i; |
| |
| ret = amba_request_regions(dev, NULL); |
| if (ret) |
| return ret; |
| |
| aaci = aaci_init_card(dev); |
| if (IS_ERR(aaci)) { |
| ret = PTR_ERR(aaci); |
| goto out; |
| } |
| |
| aaci->base = ioremap(dev->res.start, SZ_4K); |
| if (!aaci->base) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| /* |
| * Playback uses AACI channel 0 |
| */ |
| aaci->playback.base = aaci->base + AACI_CSCH1; |
| aaci->playback.fifo = aaci->base + AACI_DR1; |
| |
| for (i = 0; i < 4; i++) { |
| void __iomem *base = aaci->base + i * 0x14; |
| |
| writel(0, base + AACI_IE); |
| writel(0, base + AACI_TXCR); |
| writel(0, base + AACI_RXCR); |
| } |
| |
| writel(0x1fff, aaci->base + AACI_INTCLR); |
| writel(aaci->maincr, aaci->base + AACI_MAINCR); |
| |
| ret = aaci_probe_ac97(aaci); |
| if (ret) |
| goto out; |
| |
| /* |
| * Size the FIFOs (must be multiple of 16). |
| */ |
| aaci->fifosize = aaci_size_fifo(aaci); |
| if (aaci->fifosize & 15) { |
| printk(KERN_WARNING "AACI: fifosize = %d not supported\n", |
| aaci->fifosize); |
| ret = -ENODEV; |
| goto out; |
| } |
| |
| ret = aaci_init_pcm(aaci); |
| if (ret) |
| goto out; |
| |
| snd_card_set_dev(aaci->card, &dev->dev); |
| |
| ret = snd_card_register(aaci->card); |
| if (ret == 0) { |
| dev_info(&dev->dev, "%s, fifo %d\n", aaci->card->longname, |
| aaci->fifosize); |
| amba_set_drvdata(dev, aaci->card); |
| return ret; |
| } |
| |
| out: |
| if (aaci) |
| snd_card_free(aaci->card); |
| amba_release_regions(dev); |
| return ret; |
| } |
| |
| static int __devexit aaci_remove(struct amba_device *dev) |
| { |
| struct snd_card *card = amba_get_drvdata(dev); |
| |
| amba_set_drvdata(dev, NULL); |
| |
| if (card) { |
| struct aaci *aaci = card->private_data; |
| writel(0, aaci->base + AACI_MAINCR); |
| |
| snd_card_free(card); |
| amba_release_regions(dev); |
| } |
| |
| return 0; |
| } |
| |
| static struct amba_id aaci_ids[] = { |
| { |
| .id = 0x00041041, |
| .mask = 0x000fffff, |
| }, |
| { 0, 0 }, |
| }; |
| |
| static struct amba_driver aaci_driver = { |
| .drv = { |
| .name = DRIVER_NAME, |
| }, |
| .probe = aaci_probe, |
| .remove = __devexit_p(aaci_remove), |
| .suspend = aaci_suspend, |
| .resume = aaci_resume, |
| .id_table = aaci_ids, |
| }; |
| |
| static int __init aaci_init(void) |
| { |
| return amba_driver_register(&aaci_driver); |
| } |
| |
| static void __exit aaci_exit(void) |
| { |
| amba_driver_unregister(&aaci_driver); |
| } |
| |
| module_init(aaci_init); |
| module_exit(aaci_exit); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_DESCRIPTION("ARM PrimeCell PL041 Advanced Audio CODEC Interface driver"); |