[S390] sclp_tty: remove ioctl interface.
After all we came to the conclusion that this interface doesn't make any
sense. Besides that the ioctl number used was never registered, the header
file isn't exported, and we doubt there is even a single user.
So remove this interface, since it eases maintenance.
Cc: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
diff --git a/drivers/s390/char/sclp_tty.c b/drivers/s390/char/sclp_tty.c
index d3b1957..bcf691a 100644
--- a/drivers/s390/char/sclp_tty.c
+++ b/drivers/s390/char/sclp_tty.c
@@ -57,19 +57,11 @@
struct tty_driver *sclp_tty_driver;
-static struct sclp_ioctls sclp_ioctls;
-static struct sclp_ioctls sclp_ioctls_init =
-{
- 8, /* 1 hor. tab. = 8 spaces */
- 0, /* no echo of input by this driver */
- 80, /* 80 characters/line */
- 1, /* write after 1/10 s without final new line */
- MAX_KMEM_PAGES, /* quick fix: avoid __alloc_pages */
- MAX_KMEM_PAGES, /* take 32/64 pages from kernel memory, */
- 0, /* do not convert to lower case */
- 0x6c /* to seprate upper and lower case */
- /* ('%' in EBCDIC) */
-};
+static int sclp_tty_tolower;
+static int sclp_tty_columns = 80;
+
+#define SPACES_PER_TAB 8
+#define CASE_DELIMITER 0x6c /* to separate upper and lower case (% in EBCDIC) */
/* This routine is called whenever we try to open a SCLP terminal. */
static int
@@ -90,136 +82,6 @@
sclp_tty = NULL;
}
-/* execute commands to control the i/o behaviour of the SCLP tty at runtime */
-static int
-sclp_tty_ioctl(struct tty_struct *tty, struct file * file,
- unsigned int cmd, unsigned long arg)
-{
- unsigned long flags;
- unsigned int obuf;
- int check;
- int rc;
-
- if (tty->flags & (1 << TTY_IO_ERROR))
- return -EIO;
- rc = 0;
- check = 0;
- switch (cmd) {
- case TIOCSCLPSHTAB:
- /* set width of horizontal tab */
- if (get_user(sclp_ioctls.htab, (unsigned short __user *) arg))
- rc = -EFAULT;
- else
- check = 1;
- break;
- case TIOCSCLPGHTAB:
- /* get width of horizontal tab */
- if (put_user(sclp_ioctls.htab, (unsigned short __user *) arg))
- rc = -EFAULT;
- break;
- case TIOCSCLPSECHO:
- /* enable/disable echo of input */
- if (get_user(sclp_ioctls.echo, (unsigned char __user *) arg))
- rc = -EFAULT;
- break;
- case TIOCSCLPGECHO:
- /* Is echo of input enabled ? */
- if (put_user(sclp_ioctls.echo, (unsigned char __user *) arg))
- rc = -EFAULT;
- break;
- case TIOCSCLPSCOLS:
- /* set number of columns for output */
- if (get_user(sclp_ioctls.columns, (unsigned short __user *) arg))
- rc = -EFAULT;
- else
- check = 1;
- break;
- case TIOCSCLPGCOLS:
- /* get number of columns for output */
- if (put_user(sclp_ioctls.columns, (unsigned short __user *) arg))
- rc = -EFAULT;
- break;
- case TIOCSCLPSNL:
- /* enable/disable writing without final new line character */
- if (get_user(sclp_ioctls.final_nl, (signed char __user *) arg))
- rc = -EFAULT;
- break;
- case TIOCSCLPGNL:
- /* Is writing without final new line character enabled ? */
- if (put_user(sclp_ioctls.final_nl, (signed char __user *) arg))
- rc = -EFAULT;
- break;
- case TIOCSCLPSOBUF:
- /*
- * set the maximum buffers size for output, will be rounded
- * up to next 4kB boundary and stored as number of SCCBs
- * (4kB Buffers) limitation: 256 x 4kB
- */
- if (get_user(obuf, (unsigned int __user *) arg) == 0) {
- if (obuf & 0xFFF)
- sclp_ioctls.max_sccb = (obuf >> 12) + 1;
- else
- sclp_ioctls.max_sccb = (obuf >> 12);
- } else
- rc = -EFAULT;
- break;
- case TIOCSCLPGOBUF:
- /* get the maximum buffers size for output */
- obuf = sclp_ioctls.max_sccb << 12;
- if (put_user(obuf, (unsigned int __user *) arg))
- rc = -EFAULT;
- break;
- case TIOCSCLPGKBUF:
- /* get the number of buffers got from kernel at startup */
- if (put_user(sclp_ioctls.kmem_sccb, (unsigned short __user *) arg))
- rc = -EFAULT;
- break;
- case TIOCSCLPSCASE:
- /* enable/disable conversion from upper to lower case */
- if (get_user(sclp_ioctls.tolower, (unsigned char __user *) arg))
- rc = -EFAULT;
- break;
- case TIOCSCLPGCASE:
- /* Is conversion from upper to lower case of input enabled? */
- if (put_user(sclp_ioctls.tolower, (unsigned char __user *) arg))
- rc = -EFAULT;
- break;
- case TIOCSCLPSDELIM:
- /*
- * set special character used for separating upper and
- * lower case, 0x00 disables this feature
- */
- if (get_user(sclp_ioctls.delim, (unsigned char __user *) arg))
- rc = -EFAULT;
- break;
- case TIOCSCLPGDELIM:
- /*
- * get special character used for separating upper and
- * lower case, 0x00 disables this feature
- */
- if (put_user(sclp_ioctls.delim, (unsigned char __user *) arg))
- rc = -EFAULT;
- break;
- case TIOCSCLPSINIT:
- /* set initial (default) sclp ioctls */
- sclp_ioctls = sclp_ioctls_init;
- check = 1;
- break;
- default:
- rc = -ENOIOCTLCMD;
- break;
- }
- if (check) {
- spin_lock_irqsave(&sclp_tty_lock, flags);
- if (sclp_ttybuf != NULL) {
- sclp_set_htab(sclp_ttybuf, sclp_ioctls.htab);
- sclp_set_columns(sclp_ttybuf, sclp_ioctls.columns);
- }
- spin_unlock_irqrestore(&sclp_tty_lock, flags);
- }
- return rc;
-}
-
/*
* This routine returns the numbers of characters the tty driver
* will accept for queuing to be written. This number is subject
@@ -339,9 +201,8 @@
}
page = sclp_tty_pages.next;
list_del((struct list_head *) page);
- sclp_ttybuf = sclp_make_buffer(page,
- sclp_ioctls.columns,
- sclp_ioctls.htab);
+ sclp_ttybuf = sclp_make_buffer(page, sclp_tty_columns,
+ SPACES_PER_TAB);
}
/* try to write the string to the current output buffer */
written = sclp_write(sclp_ttybuf, str, count);
@@ -361,25 +222,13 @@
count -= written;
} while (count > 0);
/* Setup timer to output current console buffer after 1/10 second */
- if (sclp_ioctls.final_nl) {
- if (sclp_ttybuf != NULL &&
- sclp_chars_in_buffer(sclp_ttybuf) != 0 &&
- !timer_pending(&sclp_tty_timer)) {
- init_timer(&sclp_tty_timer);
- sclp_tty_timer.function = sclp_tty_timeout;
- sclp_tty_timer.data = 0UL;
- sclp_tty_timer.expires = jiffies + HZ/10;
- add_timer(&sclp_tty_timer);
- }
- } else {
- if (sclp_ttybuf != NULL &&
- sclp_chars_in_buffer(sclp_ttybuf) != 0) {
- buf = sclp_ttybuf;
- sclp_ttybuf = NULL;
- spin_unlock_irqrestore(&sclp_tty_lock, flags);
- __sclp_ttybuf_emit(buf);
- spin_lock_irqsave(&sclp_tty_lock, flags);
- }
+ if (sclp_ttybuf && sclp_chars_in_buffer(sclp_ttybuf) &&
+ !timer_pending(&sclp_tty_timer)) {
+ init_timer(&sclp_tty_timer);
+ sclp_tty_timer.function = sclp_tty_timeout;
+ sclp_tty_timer.data = 0UL;
+ sclp_tty_timer.expires = jiffies + HZ/10;
+ add_timer(&sclp_tty_timer);
}
spin_unlock_irqrestore(&sclp_tty_lock, flags);
}
@@ -515,9 +364,7 @@
* modifiy original string,
* returns length of resulting string
*/
-static int
-sclp_switch_cases(unsigned char *buf, int count,
- unsigned char delim, int tolower)
+static int sclp_switch_cases(unsigned char *buf, int count)
{
unsigned char *ip, *op;
int toggle;
@@ -527,9 +374,9 @@
ip = op = buf;
while (count-- > 0) {
/* compare with special character */
- if (*ip == delim) {
+ if (*ip == CASE_DELIMITER) {
/* followed by another special character? */
- if (count && ip[1] == delim) {
+ if (count && ip[1] == CASE_DELIMITER) {
/*
* ... then put a single copy of the special
* character to the output string
@@ -548,7 +395,7 @@
/* not the special character */
if (toggle)
/* but case switching is on */
- if (tolower)
+ if (sclp_tty_tolower)
/* switch to uppercase */
*op++ = _ebc_toupper[(int) *ip++];
else
@@ -568,30 +415,12 @@
int count;
count = end - start;
- /*
- * if set in ioctl convert EBCDIC to lower case
- * (modify original input in SCCB)
- */
- if (sclp_ioctls.tolower)
+ if (sclp_tty_tolower)
EBC_TOLOWER(start, count);
-
- /*
- * if set in ioctl find out characters in lower or upper case
- * (depends on current case) separated by a special character,
- * works on EBCDIC
- */
- if (sclp_ioctls.delim)
- count = sclp_switch_cases(start, count,
- sclp_ioctls.delim,
- sclp_ioctls.tolower);
-
+ count = sclp_switch_cases(start, count);
/* convert EBCDIC to ASCII (modify original input in SCCB) */
sclp_ebcasc_str(start, count);
- /* if set in ioctl write operators input to console */
- if (sclp_ioctls.echo)
- sclp_tty_write(sclp_tty, start, count);
-
/* transfer input to high level driver */
sclp_tty_input(start, count);
}
@@ -715,7 +544,6 @@
.write_room = sclp_tty_write_room,
.chars_in_buffer = sclp_tty_chars_in_buffer,
.flush_buffer = sclp_tty_flush_buffer,
- .ioctl = sclp_tty_ioctl,
};
static int __init
@@ -758,11 +586,10 @@
* save 4 characters for the CPU number
* written at start of each line by VM/CP
*/
- sclp_ioctls_init.columns = 76;
+ sclp_tty_columns = 76;
/* case input lines to lowercase */
- sclp_ioctls_init.tolower = 1;
+ sclp_tty_tolower = 1;
}
- sclp_ioctls = sclp_ioctls_init;
sclp_tty_chars_count = 0;
sclp_tty = NULL;