| /* |
| * pc300.h Cyclades-PC300(tm) Kernel API Definitions. |
| * |
| * Author: Ivan Passos <ivan@cyclades.com> |
| * |
| * Copyright: (c) 1999-2002 Cyclades Corp. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| * |
| * $Log: pc300.h,v $ |
| * Revision 3.12 2002/03/07 14:17:09 henrique |
| * License data fixed |
| * |
| * Revision 3.11 2002/01/28 21:09:39 daniela |
| * Included ';' after pc300hw.bus. |
| * |
| * Revision 3.10 2002/01/17 17:58:52 ivan |
| * Support for PC300-TE/M (PMC). |
| * |
| * Revision 3.9 2001/09/28 13:30:53 daniela |
| * Renamed dma_start routine to rx_dma_start. |
| * |
| * Revision 3.8 2001/09/24 13:03:45 daniela |
| * Fixed BOF interrupt treatment. Created dma_start routine. |
| * |
| * Revision 3.7 2001/08/10 17:19:58 daniela |
| * Fixed IOCTLs defines. |
| * |
| * Revision 3.6 2001/07/18 19:24:42 daniela |
| * Included kernel version. |
| * |
| * Revision 3.5 2001/07/05 18:38:08 daniela |
| * DMA transmission bug fix. |
| * |
| * Revision 3.4 2001/06/26 17:10:40 daniela |
| * New configuration parameters (line code, CRC calculation and clock). |
| * |
| * Revision 3.3 2001/06/22 13:13:02 regina |
| * MLPPP implementation |
| * |
| * Revision 3.2 2001/06/18 17:56:09 daniela |
| * Increased DEF_MTU and TX_QUEUE_LEN. |
| * |
| * Revision 3.1 2001/06/15 12:41:10 regina |
| * upping major version number |
| * |
| * Revision 1.1.1.1 2001/06/13 20:25:06 daniela |
| * PC300 initial CVS version (3.4.0-pre1) |
| * |
| * Revision 2.3 2001/03/05 daniela |
| * Created struct pc300conf, to provide the hardware information to pc300util. |
| * Inclusion of 'alloc_ramsize' field on structure 'pc300hw'. |
| * |
| * Revision 2.2 2000/12/22 daniela |
| * Structures and defines to support pc300util: statistics, status, |
| * loopback tests, trace. |
| * |
| * Revision 2.1 2000/09/28 ivan |
| * Inclusion of 'iophys' and 'iosize' fields on structure 'pc300hw', to |
| * allow release of I/O region at module unload. |
| * Changed location of include files. |
| * |
| * Revision 2.0 2000/03/27 ivan |
| * Added support for the PC300/TE cards. |
| * |
| * Revision 1.1 2000/01/31 ivan |
| * Replaced 'pc300[drv|sca].h' former PC300 driver include files. |
| * |
| * Revision 1.0 1999/12/16 ivan |
| * First official release. |
| * Inclusion of 'nchan' field on structure 'pc300hw', to allow variable |
| * number of ports per card. |
| * Inclusion of 'if_ptr' field on structure 'pc300dev'. |
| * |
| * Revision 0.6 1999/11/17 ivan |
| * Changed X.25-specific function names to comply with adopted convention. |
| * |
| * Revision 0.5 1999/11/16 Daniela Squassoni |
| * X.25 support. |
| * |
| * Revision 0.4 1999/11/15 ivan |
| * Inclusion of 'clock' field on structure 'pc300hw'. |
| * |
| * Revision 0.3 1999/11/10 ivan |
| * IOCTL name changing. |
| * Inclusion of driver function prototypes. |
| * |
| * Revision 0.2 1999/11/03 ivan |
| * Inclusion of 'tx_skb' and union 'ifu' on structure 'pc300dev'. |
| * |
| * Revision 0.1 1999/01/15 ivan |
| * Initial version. |
| * |
| */ |
| |
| #ifndef _PC300_H |
| #define _PC300_H |
| |
| #include <linux/hdlc.h> |
| #include "hd64572.h" |
| #include "pc300-falc-lh.h" |
| |
| #ifndef CY_TYPES |
| #define CY_TYPES |
| typedef __u64 ucdouble; /* 64 bits, unsigned */ |
| typedef __u32 uclong; /* 32 bits, unsigned */ |
| typedef __u16 ucshort; /* 16 bits, unsigned */ |
| typedef __u8 ucchar; /* 8 bits, unsigned */ |
| #endif /* CY_TYPES */ |
| |
| #define PC300_PROTO_MLPPP 1 |
| |
| #define PC300_KERNEL "2.4.x" /* Kernel supported by this driver */ |
| |
| #define PC300_DEVNAME "hdlc" /* Dev. name base (for hdlc0, hdlc1, etc.) */ |
| #define PC300_MAXINDEX 100 /* Max dev. name index (the '0' in hdlc0) */ |
| |
| #define PC300_MAXCARDS 4 /* Max number of cards per system */ |
| #define PC300_MAXCHAN 2 /* Number of channels per card */ |
| |
| #define PC300_PLX_WIN 0x80 /* PLX control window size (128b) */ |
| #define PC300_RAMSIZE 0x40000 /* RAM window size (256Kb) */ |
| #define PC300_SCASIZE 0x400 /* SCA window size (1Kb) */ |
| #define PC300_FALCSIZE 0x400 /* FALC window size (1Kb) */ |
| |
| #define PC300_OSC_CLOCK 24576000 |
| #define PC300_PCI_CLOCK 33000000 |
| |
| #define BD_DEF_LEN 0x0800 /* DMA buffer length (2KB) */ |
| #define DMA_TX_MEMSZ 0x8000 /* Total DMA Tx memory size (32KB/ch) */ |
| #define DMA_RX_MEMSZ 0x10000 /* Total DMA Rx memory size (64KB/ch) */ |
| |
| #define N_DMA_TX_BUF (DMA_TX_MEMSZ / BD_DEF_LEN) /* DMA Tx buffers */ |
| #define N_DMA_RX_BUF (DMA_RX_MEMSZ / BD_DEF_LEN) /* DMA Rx buffers */ |
| |
| /* DMA Buffer Offsets */ |
| #define DMA_TX_BASE ((N_DMA_TX_BUF + N_DMA_RX_BUF) * \ |
| PC300_MAXCHAN * sizeof(pcsca_bd_t)) |
| #define DMA_RX_BASE (DMA_TX_BASE + PC300_MAXCHAN*DMA_TX_MEMSZ) |
| |
| /* DMA Descriptor Offsets */ |
| #define DMA_TX_BD_BASE 0x0000 |
| #define DMA_RX_BD_BASE (DMA_TX_BD_BASE + ((PC300_MAXCHAN*DMA_TX_MEMSZ / \ |
| BD_DEF_LEN) * sizeof(pcsca_bd_t))) |
| |
| /* DMA Descriptor Macros */ |
| #define TX_BD_ADDR(chan, n) (DMA_TX_BD_BASE + \ |
| ((N_DMA_TX_BUF*chan) + n) * sizeof(pcsca_bd_t)) |
| #define RX_BD_ADDR(chan, n) (DMA_RX_BD_BASE + \ |
| ((N_DMA_RX_BUF*chan) + n) * sizeof(pcsca_bd_t)) |
| |
| /* Macro to access the FALC registers (TE only) */ |
| #define F_REG(reg, chan) (0x200*(chan) + ((reg)<<2)) |
| |
| /*************************************** |
| * Memory access functions/macros * |
| * (required to support Alpha systems) * |
| ***************************************/ |
| #ifdef __KERNEL__ |
| #define cpc_writeb(port,val) {writeb((ucchar)(val),(port)); mb();} |
| #define cpc_writew(port,val) {writew((ushort)(val),(port)); mb();} |
| #define cpc_writel(port,val) {writel((uclong)(val),(port)); mb();} |
| |
| #define cpc_readb(port) readb(port) |
| #define cpc_readw(port) readw(port) |
| #define cpc_readl(port) readl(port) |
| |
| #else /* __KERNEL__ */ |
| #define cpc_writeb(port,val) (*(volatile ucchar *)(port) = (ucchar)(val)) |
| #define cpc_writew(port,val) (*(volatile ucshort *)(port) = (ucshort)(val)) |
| #define cpc_writel(port,val) (*(volatile uclong *)(port) = (uclong)(val)) |
| |
| #define cpc_readb(port) (*(volatile ucchar *)(port)) |
| #define cpc_readw(port) (*(volatile ucshort *)(port)) |
| #define cpc_readl(port) (*(volatile uclong *)(port)) |
| |
| #endif /* __KERNEL__ */ |
| |
| /****** Data Structures *****************************************************/ |
| |
| /* |
| * RUNTIME_9050 - PLX PCI9050-1 local configuration and shared runtime |
| * registers. This structure can be used to access the 9050 registers |
| * (memory mapped). |
| */ |
| struct RUNTIME_9050 { |
| uclong loc_addr_range[4]; /* 00-0Ch : Local Address Ranges */ |
| uclong loc_rom_range; /* 10h : Local ROM Range */ |
| uclong loc_addr_base[4]; /* 14-20h : Local Address Base Addrs */ |
| uclong loc_rom_base; /* 24h : Local ROM Base */ |
| uclong loc_bus_descr[4]; /* 28-34h : Local Bus Descriptors */ |
| uclong rom_bus_descr; /* 38h : ROM Bus Descriptor */ |
| uclong cs_base[4]; /* 3C-48h : Chip Select Base Addrs */ |
| uclong intr_ctrl_stat; /* 4Ch : Interrupt Control/Status */ |
| uclong init_ctrl; /* 50h : EEPROM ctrl, Init Ctrl, etc */ |
| }; |
| |
| #define PLX_9050_LINT1_ENABLE 0x01 |
| #define PLX_9050_LINT1_POL 0x02 |
| #define PLX_9050_LINT1_STATUS 0x04 |
| #define PLX_9050_LINT2_ENABLE 0x08 |
| #define PLX_9050_LINT2_POL 0x10 |
| #define PLX_9050_LINT2_STATUS 0x20 |
| #define PLX_9050_INTR_ENABLE 0x40 |
| #define PLX_9050_SW_INTR 0x80 |
| |
| /* Masks to access the init_ctrl PLX register */ |
| #define PC300_CLKSEL_MASK (0x00000004UL) |
| #define PC300_CHMEDIA_MASK(chan) (0x00000020UL<<(chan*3)) |
| #define PC300_CTYPE_MASK (0x00000800UL) |
| |
| /* CPLD Registers (base addr = falcbase, TE only) */ |
| /* CPLD v. 0 */ |
| #define CPLD_REG1 0x140 /* Chip resets, DCD/CTS status */ |
| #define CPLD_REG2 0x144 /* Clock enable , LED control */ |
| /* CPLD v. 2 or higher */ |
| #define CPLD_V2_REG1 0x100 /* Chip resets, DCD/CTS status */ |
| #define CPLD_V2_REG2 0x104 /* Clock enable , LED control */ |
| #define CPLD_ID_REG 0x108 /* CPLD version */ |
| |
| /* CPLD Register bit description: for the FALC bits, they should always be |
| set based on the channel (use (bit<<(2*ch)) to access the correct bit for |
| that channel) */ |
| #define CPLD_REG1_FALC_RESET 0x01 |
| #define CPLD_REG1_SCA_RESET 0x02 |
| #define CPLD_REG1_GLOBAL_CLK 0x08 |
| #define CPLD_REG1_FALC_DCD 0x10 |
| #define CPLD_REG1_FALC_CTS 0x20 |
| |
| #define CPLD_REG2_FALC_TX_CLK 0x01 |
| #define CPLD_REG2_FALC_RX_CLK 0x02 |
| #define CPLD_REG2_FALC_LED1 0x10 |
| #define CPLD_REG2_FALC_LED2 0x20 |
| |
| /* Structure with FALC-related fields (TE only) */ |
| #define PC300_FALC_MAXLOOP 0x0000ffff /* for falc_issue_cmd() */ |
| |
| typedef struct falc { |
| ucchar sync; /* If true FALC is synchronized */ |
| ucchar active; /* if TRUE then already active */ |
| ucchar loop_active; /* if TRUE a line loopback UP was received */ |
| ucchar loop_gen; /* if TRUE a line loopback UP was issued */ |
| |
| ucchar num_channels; |
| ucchar offset; /* 1 for T1, 0 for E1 */ |
| ucchar full_bandwidth; |
| |
| ucchar xmb_cause; |
| ucchar multiframe_mode; |
| |
| /* Statistics */ |
| ucshort pden; /* Pulse Density violation count */ |
| ucshort los; /* Loss of Signal count */ |
| ucshort losr; /* Loss of Signal recovery count */ |
| ucshort lfa; /* Loss of frame alignment count */ |
| ucshort farec; /* Frame Alignment Recovery count */ |
| ucshort lmfa; /* Loss of multiframe alignment count */ |
| ucshort ais; /* Remote Alarm indication Signal count */ |
| ucshort sec; /* One-second timer */ |
| ucshort es; /* Errored second */ |
| ucshort rai; /* remote alarm received */ |
| ucshort bec; |
| ucshort fec; |
| ucshort cvc; |
| ucshort cec; |
| ucshort ebc; |
| |
| /* Status */ |
| ucchar red_alarm; |
| ucchar blue_alarm; |
| ucchar loss_fa; |
| ucchar yellow_alarm; |
| ucchar loss_mfa; |
| ucchar prbs; |
| } falc_t; |
| |
| typedef struct falc_status { |
| ucchar sync; /* If true FALC is synchronized */ |
| ucchar red_alarm; |
| ucchar blue_alarm; |
| ucchar loss_fa; |
| ucchar yellow_alarm; |
| ucchar loss_mfa; |
| ucchar prbs; |
| } falc_status_t; |
| |
| typedef struct rsv_x21_status { |
| ucchar dcd; |
| ucchar dsr; |
| ucchar cts; |
| ucchar rts; |
| ucchar dtr; |
| } rsv_x21_status_t; |
| |
| typedef struct pc300stats { |
| int hw_type; |
| uclong line_on; |
| uclong line_off; |
| struct net_device_stats gen_stats; |
| falc_t te_stats; |
| } pc300stats_t; |
| |
| typedef struct pc300status { |
| int hw_type; |
| rsv_x21_status_t gen_status; |
| falc_status_t te_status; |
| } pc300status_t; |
| |
| typedef struct pc300loopback { |
| char loop_type; |
| char loop_on; |
| } pc300loopback_t; |
| |
| typedef struct pc300patterntst { |
| char patrntst_on; /* 0 - off; 1 - on; 2 - read num_errors */ |
| ucshort num_errors; |
| } pc300patterntst_t; |
| |
| typedef struct pc300dev { |
| void *if_ptr; /* General purpose pointer */ |
| struct pc300ch *chan; |
| ucchar trace_on; |
| uclong line_on; /* DCD(X.21, RSV) / sync(TE) change counters */ |
| uclong line_off; |
| #ifdef __KERNEL__ |
| char name[16]; |
| struct net_device *dev; |
| |
| void *private; |
| struct sk_buff *tx_skb; |
| union { /* This union has all the protocol-specific structures */ |
| struct ppp_device pppdev; |
| }ifu; |
| #ifdef CONFIG_PC300_MLPPP |
| void *cpc_tty; /* information to PC300 TTY driver */ |
| #endif |
| #endif /* __KERNEL__ */ |
| }pc300dev_t; |
| |
| typedef struct pc300hw { |
| int type; /* RSV, X21, etc. */ |
| int bus; /* Bus (PCI, PMC, etc.) */ |
| int nchan; /* number of channels */ |
| int irq; /* interrupt request level */ |
| uclong clock; /* Board clock */ |
| ucchar cpld_id; /* CPLD ID (TE only) */ |
| ucshort cpld_reg1; /* CPLD reg 1 (TE only) */ |
| ucshort cpld_reg2; /* CPLD reg 2 (TE only) */ |
| ucshort gpioc_reg; /* PLX GPIOC reg */ |
| ucshort intctl_reg; /* PLX Int Ctrl/Status reg */ |
| uclong iophys; /* PLX registers I/O base */ |
| uclong iosize; /* PLX registers I/O size */ |
| uclong plxphys; /* PLX registers MMIO base (physical) */ |
| void __iomem * plxbase; /* PLX registers MMIO base (virtual) */ |
| uclong plxsize; /* PLX registers MMIO size */ |
| uclong scaphys; /* SCA registers MMIO base (physical) */ |
| void __iomem * scabase; /* SCA registers MMIO base (virtual) */ |
| uclong scasize; /* SCA registers MMIO size */ |
| uclong ramphys; /* On-board RAM MMIO base (physical) */ |
| void __iomem * rambase; /* On-board RAM MMIO base (virtual) */ |
| uclong alloc_ramsize; /* RAM MMIO size allocated by the PCI bridge */ |
| uclong ramsize; /* On-board RAM MMIO size */ |
| uclong falcphys; /* FALC registers MMIO base (physical) */ |
| void __iomem * falcbase;/* FALC registers MMIO base (virtual) */ |
| uclong falcsize; /* FALC registers MMIO size */ |
| } pc300hw_t; |
| |
| typedef struct pc300chconf { |
| sync_serial_settings phys_settings; /* Clock type/rate (in bps), |
| loopback mode */ |
| raw_hdlc_proto proto_settings; /* Encoding, parity (CRC) */ |
| uclong media; /* HW media (RS232, V.35, etc.) */ |
| uclong proto; /* Protocol (PPP, X.25, etc.) */ |
| ucchar monitor; /* Monitor mode (0 = off, !0 = on) */ |
| |
| /* TE-specific parameters */ |
| ucchar lcode; /* Line Code (AMI, B8ZS, etc.) */ |
| ucchar fr_mode; /* Frame Mode (ESF, D4, etc.) */ |
| ucchar lbo; /* Line Build Out */ |
| ucchar rx_sens; /* Rx Sensitivity (long- or short-haul) */ |
| uclong tslot_bitmap; /* bit[i]=1 => timeslot _i_ is active */ |
| } pc300chconf_t; |
| |
| typedef struct pc300ch { |
| struct pc300 *card; |
| int channel; |
| pc300dev_t d; |
| pc300chconf_t conf; |
| ucchar tx_first_bd; /* First TX DMA block descr. w/ data */ |
| ucchar tx_next_bd; /* Next free TX DMA block descriptor */ |
| ucchar rx_first_bd; /* First free RX DMA block descriptor */ |
| ucchar rx_last_bd; /* Last free RX DMA block descriptor */ |
| ucchar nfree_tx_bd; /* Number of free TX DMA block descriptors */ |
| falc_t falc; /* FALC structure (TE only) */ |
| } pc300ch_t; |
| |
| typedef struct pc300 { |
| pc300hw_t hw; /* hardware config. */ |
| pc300ch_t chan[PC300_MAXCHAN]; |
| #ifdef __KERNEL__ |
| spinlock_t card_lock; |
| #endif /* __KERNEL__ */ |
| } pc300_t; |
| |
| typedef struct pc300conf { |
| pc300hw_t hw; |
| pc300chconf_t conf; |
| } pc300conf_t; |
| |
| /* DEV ioctl() commands */ |
| #define N_SPPP_IOCTLS 2 |
| |
| enum pc300_ioctl_cmds { |
| SIOCCPCRESERVED = (SIOCDEVPRIVATE + N_SPPP_IOCTLS), |
| SIOCGPC300CONF, |
| SIOCSPC300CONF, |
| SIOCGPC300STATUS, |
| SIOCGPC300FALCSTATUS, |
| SIOCGPC300UTILSTATS, |
| SIOCGPC300UTILSTATUS, |
| SIOCSPC300TRACE, |
| SIOCSPC300LOOPBACK, |
| SIOCSPC300PATTERNTEST, |
| }; |
| |
| /* Loopback types - PC300/TE boards */ |
| enum pc300_loopback_cmds { |
| PC300LOCLOOP = 1, |
| PC300REMLOOP, |
| PC300PAYLOADLOOP, |
| PC300GENLOOPUP, |
| PC300GENLOOPDOWN, |
| }; |
| |
| /* Control Constant Definitions */ |
| #define PC300_RSV 0x01 |
| #define PC300_X21 0x02 |
| #define PC300_TE 0x03 |
| |
| #define PC300_PCI 0x00 |
| #define PC300_PMC 0x01 |
| |
| #define PC300_LC_AMI 0x01 |
| #define PC300_LC_B8ZS 0x02 |
| #define PC300_LC_NRZ 0x03 |
| #define PC300_LC_HDB3 0x04 |
| |
| /* Framing (T1) */ |
| #define PC300_FR_ESF 0x01 |
| #define PC300_FR_D4 0x02 |
| #define PC300_FR_ESF_JAPAN 0x03 |
| |
| /* Framing (E1) */ |
| #define PC300_FR_MF_CRC4 0x04 |
| #define PC300_FR_MF_NON_CRC4 0x05 |
| #define PC300_FR_UNFRAMED 0x06 |
| |
| #define PC300_LBO_0_DB 0x00 |
| #define PC300_LBO_7_5_DB 0x01 |
| #define PC300_LBO_15_DB 0x02 |
| #define PC300_LBO_22_5_DB 0x03 |
| |
| #define PC300_RX_SENS_SH 0x01 |
| #define PC300_RX_SENS_LH 0x02 |
| |
| #define PC300_TX_TIMEOUT (2*HZ) |
| #define PC300_TX_QUEUE_LEN 100 |
| #define PC300_DEF_MTU 1600 |
| |
| #ifdef __KERNEL__ |
| /* Function Prototypes */ |
| void tx_dma_start(pc300_t *, int); |
| int cpc_open(struct net_device *dev); |
| int cpc_set_media(hdlc_device *, int); |
| #endif /* __KERNEL__ */ |
| |
| #endif /* _PC300_H */ |
| |