rt2800: Add documentation on MCU requests
Add documentation on MCU communication, some of known commands and
their arguments. Supplement command ids.
Signed-off-by: Jakub Kicinski <kubakici@wp.pl>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/rt2x00/rt2800.h b/drivers/net/wireless/rt2x00/rt2800.h
index 3b32f84..e5c05d8 100644
--- a/drivers/net/wireless/rt2x00/rt2800.h
+++ b/drivers/net/wireless/rt2x00/rt2800.h
@@ -1637,6 +1637,7 @@
/*
* H2M_MAILBOX_CSR: Host-to-MCU Mailbox.
+ * CMD_TOKEN: Command id, 0xff disable status reporting.
*/
#define H2M_MAILBOX_CSR 0x7010
#define H2M_MAILBOX_CSR_ARG0 FIELD32(0x000000ff)
@@ -1646,6 +1647,8 @@
/*
* H2M_MAILBOX_CID:
+ * Free slots contain 0xff. MCU will store command's token to lowest free slot.
+ * If all slots are occupied status will be dropped.
*/
#define H2M_MAILBOX_CID 0x7014
#define H2M_MAILBOX_CID_CMD0 FIELD32(0x000000ff)
@@ -1655,6 +1658,7 @@
/*
* H2M_MAILBOX_STATUS:
+ * Command status will be saved to same slot as command id.
*/
#define H2M_MAILBOX_STATUS 0x701c
@@ -2298,6 +2302,12 @@
/*
* MCU mailbox commands.
+ * MCU_SLEEP - go to power-save mode.
+ * arg1: 1: save as much power as possible, 0: save less power.
+ * status: 1: success, 2: already asleep,
+ * 3: maybe MAC is busy so can't finish this task.
+ * MCU_RADIO_OFF
+ * arg0: 0: do power-saving, NOT turn off radio.
*/
#define MCU_SLEEP 0x30
#define MCU_WAKEUP 0x31
@@ -2318,7 +2328,10 @@
/*
* MCU mailbox tokens
*/
-#define TOKEN_WAKUP 3
+#define TOKEN_SLEEP 1
+#define TOKEN_RADIO_OFF 2
+#define TOKEN_WAKEUP 3
+
/*
* DMA descriptor defines.
diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c
index b45ce76..627fc22 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -522,14 +522,16 @@
enum dev_state state)
{
if (state == STATE_AWAKE) {
- rt2800_mcu_request(rt2x00dev, MCU_WAKEUP, TOKEN_WAKUP, 0, 0x02);
- rt2800pci_mcu_status(rt2x00dev, TOKEN_WAKUP);
+ rt2800_mcu_request(rt2x00dev, MCU_WAKEUP, TOKEN_WAKEUP,
+ 0, 0x02);
+ rt2800pci_mcu_status(rt2x00dev, TOKEN_WAKEUP);
} else if (state == STATE_SLEEP) {
rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_STATUS,
0xffffffff);
rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_CID,
0xffffffff);
- rt2800_mcu_request(rt2x00dev, MCU_SLEEP, 0x01, 0xff, 0x01);
+ rt2800_mcu_request(rt2x00dev, MCU_SLEEP, TOKEN_SLEEP,
+ 0xff, 0x01);
}
return 0;