Invensense MPU6050 Device Driver.
This the basic functional Invensense MPU6050 Device driver.
Signed-off-by: Ge Gao <ggao@invensense.com>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-mpu6050 b/Documentation/ABI/testing/sysfs-bus-iio-mpu6050
new file mode 100644
index 0000000..cb53737
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-iio-mpu6050
@@ -0,0 +1,13 @@
+What: /sys/bus/iio/devices/iio:deviceX/in_gyro_matrix
+What: /sys/bus/iio/devices/iio:deviceX/in_accel_matrix
+What: /sys/bus/iio/devices/iio:deviceX/in_magn_matrix
+KernelVersion: 3.4.0
+Contact: linux-iio@vger.kernel.org
+Description:
+ This is mounting matrix for motion sensors. Mounting matrix
+ is a 3x3 unitary matrix. A typical mounting matrix would look like
+ [0, 1, 0; 1, 0, 0; 0, 0, -1]. Using this information, it would be
+ easy to tell the relative positions among sensors as well as their
+ positions relative to the board that holds these sensors. Identity matrix
+ [1, 0, 0; 0, 1, 0; 0, 0, 1] means sensor chip and device are perfectly
+ aligned with each other. All axes are exactly the same.
diff --git a/drivers/iio/imu/Kconfig b/drivers/iio/imu/Kconfig
index 47f66ed..4f40a10 100644
--- a/drivers/iio/imu/Kconfig
+++ b/drivers/iio/imu/Kconfig
@@ -36,3 +36,5 @@
help
A set of buffer helper functions for the Analog Devices ADIS* device
family.
+
+source "drivers/iio/imu/inv_mpu6050/Kconfig"
diff --git a/drivers/iio/imu/Makefile b/drivers/iio/imu/Makefile
index 019b717..f2f56ce 100644
--- a/drivers/iio/imu/Makefile
+++ b/drivers/iio/imu/Makefile
@@ -11,3 +11,5 @@
adis_lib-$(CONFIG_IIO_ADIS_LIB_BUFFER) += adis_trigger.o
adis_lib-$(CONFIG_IIO_ADIS_LIB_BUFFER) += adis_buffer.o
obj-$(CONFIG_IIO_ADIS_LIB) += adis_lib.o
+
+obj-y += inv_mpu6050/
diff --git a/drivers/iio/imu/inv_mpu6050/Kconfig b/drivers/iio/imu/inv_mpu6050/Kconfig
new file mode 100644
index 0000000..b5cfa3a
--- /dev/null
+++ b/drivers/iio/imu/inv_mpu6050/Kconfig
@@ -0,0 +1,13 @@
+#
+# inv-mpu6050 drivers for Invensense MPU devices and combos
+#
+
+config INV_MPU6050_IIO
+ tristate "Invensense MPU6050 devices"
+ depends on I2C && SYSFS
+ select IIO_TRIGGERED_BUFFER
+ help
+ This driver supports the Invensense MPU6050 devices.
+ It is a gyroscope/accelerometer combo device.
+ This driver can be built as a module. The module will be called
+ inv-mpu6050.
diff --git a/drivers/iio/imu/inv_mpu6050/Makefile b/drivers/iio/imu/inv_mpu6050/Makefile
new file mode 100644
index 0000000..3a677c7
--- /dev/null
+++ b/drivers/iio/imu/inv_mpu6050/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for Invensense MPU6050 device.
+#
+
+obj-$(CONFIG_INV_MPU6050_IIO) += inv-mpu6050.o
+inv-mpu6050-objs := inv_mpu_core.o inv_mpu_ring.o inv_mpu_trigger.o
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
new file mode 100644
index 0000000..37ca05b
--- /dev/null
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
@@ -0,0 +1,795 @@
+/*
+* Copyright (C) 2012 Invensense, Inc.
+*
+* This software is licensed under the terms of the GNU General Public
+* License version 2, as published by the Free Software Foundation, and
+* may be copied, distributed, and modified under those terms.
+*
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+* GNU General Public License for more details.
+*/
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+#include <linux/sysfs.h>
+#include <linux/jiffies.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/kfifo.h>
+#include <linux/spinlock.h>
+#include "inv_mpu_iio.h"
+
+/*
+ * this is the gyro scale translated from dynamic range plus/minus
+ * {250, 500, 1000, 2000} to rad/s
+ */
+static const int gyro_scale_6050[] = {133090, 266181, 532362, 1064724};
+
+/*
+ * this is the accel scale translated from dynamic range plus/minus
+ * {2, 4, 8, 16} to m/s^2
+ */
+static const int accel_scale[] = {598, 1196, 2392, 4785};
+
+static const struct inv_mpu6050_reg_map reg_set_6050 = {
+ .sample_rate_div = INV_MPU6050_REG_SAMPLE_RATE_DIV,
+ .lpf = INV_MPU6050_REG_CONFIG,
+ .user_ctrl = INV_MPU6050_REG_USER_CTRL,
+ .fifo_en = INV_MPU6050_REG_FIFO_EN,
+ .gyro_config = INV_MPU6050_REG_GYRO_CONFIG,
+ .accl_config = INV_MPU6050_REG_ACCEL_CONFIG,
+ .fifo_count_h = INV_MPU6050_REG_FIFO_COUNT_H,
+ .fifo_r_w = INV_MPU6050_REG_FIFO_R_W,
+ .raw_gyro = INV_MPU6050_REG_RAW_GYRO,
+ .raw_accl = INV_MPU6050_REG_RAW_ACCEL,
+ .temperature = INV_MPU6050_REG_TEMPERATURE,
+ .int_enable = INV_MPU6050_REG_INT_ENABLE,
+ .pwr_mgmt_1 = INV_MPU6050_REG_PWR_MGMT_1,
+ .pwr_mgmt_2 = INV_MPU6050_REG_PWR_MGMT_2,
+};
+
+static const struct inv_mpu6050_chip_config chip_config_6050 = {
+ .fsr = INV_MPU6050_FSR_2000DPS,
+ .lpf = INV_MPU6050_FILTER_20HZ,
+ .fifo_rate = INV_MPU6050_INIT_FIFO_RATE,
+ .gyro_fifo_enable = false,
+ .accl_fifo_enable = false,
+ .accl_fs = INV_MPU6050_FS_02G,
+};
+
+static const struct inv_mpu6050_hw hw_info[INV_NUM_PARTS] = {
+ {
+ .num_reg = 117,
+ .name = "MPU6050",
+ .reg = ®_set_6050,
+ .config = &chip_config_6050,
+ },
+};
+
+int inv_mpu6050_write_reg(struct inv_mpu6050_state *st, int reg, u8 d)
+{
+ return i2c_smbus_write_i2c_block_data(st->client, reg, 1, &d);
+}
+
+int inv_mpu6050_switch_engine(struct inv_mpu6050_state *st, bool en, u32 mask)
+{
+ u8 d, mgmt_1;
+ int result;
+
+ /* switch clock needs to be careful. Only when gyro is on, can
+ clock source be switched to gyro. Otherwise, it must be set to
+ internal clock */
+ if (INV_MPU6050_BIT_PWR_GYRO_STBY == mask) {
+ result = i2c_smbus_read_i2c_block_data(st->client,
+ st->reg->pwr_mgmt_1, 1, &mgmt_1);
+ if (result != 1)
+ return result;
+
+ mgmt_1 &= ~INV_MPU6050_BIT_CLK_MASK;
+ }
+
+ if ((INV_MPU6050_BIT_PWR_GYRO_STBY == mask) && (!en)) {
+ /* turning off gyro requires switch to internal clock first.
+ Then turn off gyro engine */
+ mgmt_1 |= INV_CLK_INTERNAL;
+ result = inv_mpu6050_write_reg(st, st->reg->pwr_mgmt_1, mgmt_1);
+ if (result)
+ return result;
+ }
+
+ result = i2c_smbus_read_i2c_block_data(st->client,
+ st->reg->pwr_mgmt_2, 1, &d);
+ if (result != 1)
+ return result;
+ if (en)
+ d &= ~mask;
+ else
+ d |= mask;
+ result = inv_mpu6050_write_reg(st, st->reg->pwr_mgmt_2, d);
+ if (result)
+ return result;
+
+ if (en) {
+ /* Wait for output stablize */
+ msleep(INV_MPU6050_TEMP_UP_TIME);
+ if (INV_MPU6050_BIT_PWR_GYRO_STBY == mask) {
+ /* switch internal clock to PLL */
+ mgmt_1 |= INV_CLK_PLL;
+ result = inv_mpu6050_write_reg(st,
+ st->reg->pwr_mgmt_1, mgmt_1);
+ if (result)
+ return result;
+ }
+ }
+
+ return 0;
+}
+
+int inv_mpu6050_set_power_itg(struct inv_mpu6050_state *st, bool power_on)
+{
+ int result;
+
+ if (power_on)
+ result = inv_mpu6050_write_reg(st, st->reg->pwr_mgmt_1, 0);
+ else
+ result = inv_mpu6050_write_reg(st, st->reg->pwr_mgmt_1,
+ INV_MPU6050_BIT_SLEEP);
+ if (result)
+ return result;
+
+ if (power_on)
+ msleep(INV_MPU6050_REG_UP_TIME);
+
+ return 0;
+}
+
+/**
+ * inv_mpu6050_init_config() - Initialize hardware, disable FIFO.
+ *
+ * Initial configuration:
+ * FSR: ± 2000DPS
+ * DLPF: 20Hz
+ * FIFO rate: 50Hz
+ * Clock source: Gyro PLL
+ */
+static int inv_mpu6050_init_config(struct iio_dev *indio_dev)
+{
+ int result;
+ u8 d;
+ struct inv_mpu6050_state *st = iio_priv(indio_dev);
+
+ result = inv_mpu6050_set_power_itg(st, true);
+ if (result)
+ return result;
+ d = (INV_MPU6050_FSR_2000DPS << INV_MPU6050_GYRO_CONFIG_FSR_SHIFT);
+ result = inv_mpu6050_write_reg(st, st->reg->gyro_config, d);
+ if (result)
+ return result;
+
+ d = INV_MPU6050_FILTER_20HZ;
+ result = inv_mpu6050_write_reg(st, st->reg->lpf, d);
+ if (result)
+ return result;
+
+ d = INV_MPU6050_ONE_K_HZ / INV_MPU6050_INIT_FIFO_RATE - 1;
+ result = inv_mpu6050_write_reg(st, st->reg->sample_rate_div, d);
+ if (result)
+ return result;
+
+ d = (INV_MPU6050_FS_02G << INV_MPU6050_ACCL_CONFIG_FSR_SHIFT);
+ result = inv_mpu6050_write_reg(st, st->reg->accl_config, d);
+ if (result)
+ return result;
+
+ memcpy(&st->chip_config, hw_info[st->chip_type].config,
+ sizeof(struct inv_mpu6050_chip_config));
+ result = inv_mpu6050_set_power_itg(st, false);
+
+ return result;
+}
+
+static int inv_mpu6050_sensor_show(struct inv_mpu6050_state *st, int reg,
+ int axis, int *val)
+{
+ int ind, result;
+ __be16 d;
+
+ ind = (axis - IIO_MOD_X) * 2;
+ result = i2c_smbus_read_i2c_block_data(st->client, reg + ind, 2,
+ (u8 *)&d);
+ if (result != 2)
+ return -EINVAL;
+ *val = (short)be16_to_cpup(&d);
+
+ return IIO_VAL_INT;
+}
+
+static int inv_mpu6050_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val,
+ int *val2,
+ long mask) {
+ struct inv_mpu6050_state *st = iio_priv(indio_dev);
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ {
+ int ret, result;
+
+ ret = IIO_VAL_INT;
+ result = 0;
+ mutex_lock(&indio_dev->mlock);
+ if (!st->chip_config.enable) {
+ result = inv_mpu6050_set_power_itg(st, true);
+ if (result)
+ goto error_read_raw;
+ }
+ /* when enable is on, power is already on */
+ switch (chan->type) {
+ case IIO_ANGL_VEL:
+ if (!st->chip_config.gyro_fifo_enable ||
+ !st->chip_config.enable) {
+ result = inv_mpu6050_switch_engine(st, true,
+ INV_MPU6050_BIT_PWR_GYRO_STBY);
+ if (result)
+ goto error_read_raw;
+ }
+ ret = inv_mpu6050_sensor_show(st, st->reg->raw_gyro,
+ chan->channel2, val);
+ if (!st->chip_config.gyro_fifo_enable ||
+ !st->chip_config.enable) {
+ result = inv_mpu6050_switch_engine(st, false,
+ INV_MPU6050_BIT_PWR_GYRO_STBY);
+ if (result)
+ goto error_read_raw;
+ }
+ break;
+ case IIO_ACCEL:
+ if (!st->chip_config.accl_fifo_enable ||
+ !st->chip_config.enable) {
+ result = inv_mpu6050_switch_engine(st, true,
+ INV_MPU6050_BIT_PWR_ACCL_STBY);
+ if (result)
+ goto error_read_raw;
+ }
+ ret = inv_mpu6050_sensor_show(st, st->reg->raw_accl,
+ chan->channel2, val);
+ if (!st->chip_config.accl_fifo_enable ||
+ !st->chip_config.enable) {
+ result = inv_mpu6050_switch_engine(st, false,
+ INV_MPU6050_BIT_PWR_ACCL_STBY);
+ if (result)
+ goto error_read_raw;
+ }
+ break;
+ case IIO_TEMP:
+ /* wait for stablization */
+ msleep(INV_MPU6050_SENSOR_UP_TIME);
+ inv_mpu6050_sensor_show(st, st->reg->temperature,
+ IIO_MOD_X, val);
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+error_read_raw:
+ if (!st->chip_config.enable)
+ result |= inv_mpu6050_set_power_itg(st, false);
+ mutex_unlock(&indio_dev->mlock);
+ if (result)
+ return result;
+
+ return ret;
+ }
+ case IIO_CHAN_INFO_SCALE:
+ switch (chan->type) {
+ case IIO_ANGL_VEL:
+ *val = 0;
+ *val2 = gyro_scale_6050[st->chip_config.fsr];
+
+ return IIO_VAL_INT_PLUS_NANO;
+ case IIO_ACCEL:
+ *val = 0;
+ *val2 = accel_scale[st->chip_config.accl_fs];
+
+ return IIO_VAL_INT_PLUS_MICRO;
+ case IIO_TEMP:
+ *val = 0;
+ *val2 = INV_MPU6050_TEMP_SCALE;
+
+ return IIO_VAL_INT_PLUS_MICRO;
+ default:
+ return -EINVAL;
+ }
+ case IIO_CHAN_INFO_OFFSET:
+ switch (chan->type) {
+ case IIO_TEMP:
+ *val = INV_MPU6050_TEMP_OFFSET;
+
+ return IIO_VAL_INT;
+ default:
+ return -EINVAL;
+ }
+ default:
+ return -EINVAL;
+ }
+}
+
+static int inv_mpu6050_write_fsr(struct inv_mpu6050_state *st, int fsr)
+{
+ int result;
+ u8 d;
+
+ if (fsr < 0 || fsr > INV_MPU6050_MAX_GYRO_FS_PARAM)
+ return -EINVAL;
+ if (fsr == st->chip_config.fsr)
+ return 0;
+
+ d = (fsr << INV_MPU6050_GYRO_CONFIG_FSR_SHIFT);
+ result = inv_mpu6050_write_reg(st, st->reg->gyro_config, d);
+ if (result)
+ return result;
+ st->chip_config.fsr = fsr;
+
+ return 0;
+}
+
+static int inv_mpu6050_write_accel_fs(struct inv_mpu6050_state *st, int fs)
+{
+ int result;
+ u8 d;
+
+ if (fs < 0 || fs > INV_MPU6050_MAX_ACCL_FS_PARAM)
+ return -EINVAL;
+ if (fs == st->chip_config.accl_fs)
+ return 0;
+
+ d = (fs << INV_MPU6050_ACCL_CONFIG_FSR_SHIFT);
+ result = inv_mpu6050_write_reg(st, st->reg->accl_config, d);
+ if (result)
+ return result;
+ st->chip_config.accl_fs = fs;
+
+ return 0;
+}
+
+static int inv_mpu6050_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int val,
+ int val2,
+ long mask) {
+ struct inv_mpu6050_state *st = iio_priv(indio_dev);
+ int result;
+
+ mutex_lock(&indio_dev->mlock);
+ /* we should only update scale when the chip is disabled, i.e.,
+ not running */
+ if (st->chip_config.enable) {
+ result = -EBUSY;
+ goto error_write_raw;
+ }
+ result = inv_mpu6050_set_power_itg(st, true);
+ if (result)
+ goto error_write_raw;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_SCALE:
+ switch (chan->type) {
+ case IIO_ANGL_VEL:
+ result = inv_mpu6050_write_fsr(st, val);
+ break;
+ case IIO_ACCEL:
+ result = inv_mpu6050_write_accel_fs(st, val);
+ break;
+ default:
+ result = -EINVAL;
+ break;
+ }
+ break;
+ default:
+ result = -EINVAL;
+ break;
+ }
+
+error_write_raw:
+ result |= inv_mpu6050_set_power_itg(st, false);
+ mutex_unlock(&indio_dev->mlock);
+
+ return result;
+}
+
+/**
+ * inv_mpu6050_set_lpf() - set low pass filer based on fifo rate.
+ *
+ * Based on the Nyquist principle, the sampling rate must
+ * exceed twice of the bandwidth of the signal, or there
+ * would be alising. This function basically search for the
+ * correct low pass parameters based on the fifo rate, e.g,
+ * sampling frequency.
+ */
+static int inv_mpu6050_set_lpf(struct inv_mpu6050_state *st, int rate)
+{
+ const int hz[] = {188, 98, 42, 20, 10, 5};
+ const int d[] = {INV_MPU6050_FILTER_188HZ, INV_MPU6050_FILTER_98HZ,
+ INV_MPU6050_FILTER_42HZ, INV_MPU6050_FILTER_20HZ,
+ INV_MPU6050_FILTER_10HZ, INV_MPU6050_FILTER_5HZ};
+ int i, h, result;
+ u8 data;
+
+ h = (rate >> 1);
+ i = 0;
+ while ((h < hz[i]) && (i < ARRAY_SIZE(d) - 1))
+ i++;
+ data = d[i];
+ result = inv_mpu6050_write_reg(st, st->reg->lpf, data);
+ if (result)
+ return result;
+ st->chip_config.lpf = data;
+
+ return 0;
+}
+
+/**
+ * inv_mpu6050_fifo_rate_store() - Set fifo rate.
+ */
+static ssize_t inv_mpu6050_fifo_rate_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ s32 fifo_rate;
+ u8 d;
+ int result;
+ struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+ struct inv_mpu6050_state *st = iio_priv(indio_dev);
+
+ if (kstrtoint(buf, 10, &fifo_rate))
+ return -EINVAL;
+ if (fifo_rate < INV_MPU6050_MIN_FIFO_RATE ||
+ fifo_rate > INV_MPU6050_MAX_FIFO_RATE)
+ return -EINVAL;
+ if (fifo_rate == st->chip_config.fifo_rate)
+ return count;
+
+ mutex_lock(&indio_dev->mlock);
+ if (st->chip_config.enable) {
+ result = -EBUSY;
+ goto fifo_rate_fail;
+ }
+ result = inv_mpu6050_set_power_itg(st, true);
+ if (result)
+ goto fifo_rate_fail;
+
+ d = INV_MPU6050_ONE_K_HZ / fifo_rate - 1;
+ result = inv_mpu6050_write_reg(st, st->reg->sample_rate_div, d);
+ if (result)
+ goto fifo_rate_fail;
+ st->chip_config.fifo_rate = fifo_rate;
+
+ result = inv_mpu6050_set_lpf(st, fifo_rate);
+ if (result)
+ goto fifo_rate_fail;
+
+fifo_rate_fail:
+ result |= inv_mpu6050_set_power_itg(st, false);
+ mutex_unlock(&indio_dev->mlock);
+ if (result)
+ return result;
+
+ return count;
+}
+
+/**
+ * inv_fifo_rate_show() - Get the current sampling rate.
+ */
+static ssize_t inv_fifo_rate_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct inv_mpu6050_state *st = iio_priv(dev_to_iio_dev(dev));
+
+ return sprintf(buf, "%d\n", st->chip_config.fifo_rate);
+}
+
+/**
+ * inv_attr_show() - calling this function will show current
+ * parameters.
+ */
+static ssize_t inv_attr_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct inv_mpu6050_state *st = iio_priv(dev_to_iio_dev(dev));
+ struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
+ s8 *m;
+
+ switch (this_attr->address) {
+ /* In MPU6050, the two matrix are the same because gyro and accel
+ are integrated in one chip */
+ case ATTR_GYRO_MATRIX:
+ case ATTR_ACCL_MATRIX:
+ m = st->plat_data.orientation;
+
+ return sprintf(buf, "%d, %d, %d; %d, %d, %d; %d, %d, %d\n",
+ m[0], m[1], m[2], m[3], m[4], m[5], m[6], m[7], m[8]);
+ default:
+ return -EINVAL;
+ }
+}
+
+/**
+ * inv_mpu6050_validate_trigger() - validate_trigger callback for invensense
+ * MPU6050 device.
+ * @indio_dev: The IIO device
+ * @trig: The new trigger
+ *
+ * Returns: 0 if the 'trig' matches the trigger registered by the MPU6050
+ * device, -EINVAL otherwise.
+ */
+static int inv_mpu6050_validate_trigger(struct iio_dev *indio_dev,
+ struct iio_trigger *trig)
+{
+ struct inv_mpu6050_state *st = iio_priv(indio_dev);
+
+ if (st->trig != trig)
+ return -EINVAL;
+
+ return 0;
+}
+
+#define INV_MPU6050_CHAN(_type, _channel2, _index) \
+ { \
+ .type = _type, \
+ .modified = 1, \
+ .channel2 = _channel2, \
+ .info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT \
+ | IIO_CHAN_INFO_RAW_SEPARATE_BIT, \
+ .scan_index = _index, \
+ .scan_type = { \
+ .sign = 's', \
+ .realbits = 16, \
+ .storagebits = 16, \
+ .shift = 0 , \
+ .endianness = IIO_BE, \
+ }, \
+ }
+
+static const struct iio_chan_spec inv_mpu_channels[] = {
+ IIO_CHAN_SOFT_TIMESTAMP(INV_MPU6050_SCAN_TIMESTAMP),
+ /*
+ * Note that temperature should only be via polled reading only,
+ * not the final scan elements output.
+ */
+ {
+ .type = IIO_TEMP,
+ .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT
+ | IIO_CHAN_INFO_OFFSET_SEPARATE_BIT
+ | IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
+ .scan_index = -1,
+ },
+ INV_MPU6050_CHAN(IIO_ANGL_VEL, IIO_MOD_X, INV_MPU6050_SCAN_GYRO_X),
+ INV_MPU6050_CHAN(IIO_ANGL_VEL, IIO_MOD_Y, INV_MPU6050_SCAN_GYRO_Y),
+ INV_MPU6050_CHAN(IIO_ANGL_VEL, IIO_MOD_Z, INV_MPU6050_SCAN_GYRO_Z),
+
+ INV_MPU6050_CHAN(IIO_ACCEL, IIO_MOD_X, INV_MPU6050_SCAN_ACCL_X),
+ INV_MPU6050_CHAN(IIO_ACCEL, IIO_MOD_Y, INV_MPU6050_SCAN_ACCL_Y),
+ INV_MPU6050_CHAN(IIO_ACCEL, IIO_MOD_Z, INV_MPU6050_SCAN_ACCL_Z),
+};
+
+/* constant IIO attribute */
+static IIO_CONST_ATTR_SAMP_FREQ_AVAIL("10 20 50 100 200 500");
+static IIO_DEV_ATTR_SAMP_FREQ(S_IRUGO | S_IWUSR, inv_fifo_rate_show,
+ inv_mpu6050_fifo_rate_store);
+static IIO_DEVICE_ATTR(in_gyro_matrix, S_IRUGO, inv_attr_show, NULL,
+ ATTR_GYRO_MATRIX);
+static IIO_DEVICE_ATTR(in_accel_matrix, S_IRUGO, inv_attr_show, NULL,
+ ATTR_ACCL_MATRIX);
+
+static struct attribute *inv_attributes[] = {
+ &iio_dev_attr_in_gyro_matrix.dev_attr.attr,
+ &iio_dev_attr_in_accel_matrix.dev_attr.attr,
+ &iio_dev_attr_sampling_frequency.dev_attr.attr,
+ &iio_const_attr_sampling_frequency_available.dev_attr.attr,
+ NULL,
+};
+
+static const struct attribute_group inv_attribute_group = {
+ .attrs = inv_attributes
+};
+
+static const struct iio_info mpu_info = {
+ .driver_module = THIS_MODULE,
+ .read_raw = &inv_mpu6050_read_raw,
+ .write_raw = &inv_mpu6050_write_raw,
+ .attrs = &inv_attribute_group,
+ .validate_trigger = inv_mpu6050_validate_trigger,
+};
+
+/**
+ * inv_check_and_setup_chip() - check and setup chip.
+ */
+static int inv_check_and_setup_chip(struct inv_mpu6050_state *st,
+ const struct i2c_device_id *id)
+{
+ int result;
+
+ st->chip_type = INV_MPU6050;
+ st->hw = &hw_info[st->chip_type];
+ st->reg = hw_info[st->chip_type].reg;
+
+ /* reset to make sure previous state are not there */
+ result = inv_mpu6050_write_reg(st, st->reg->pwr_mgmt_1,
+ INV_MPU6050_BIT_H_RESET);
+ if (result)
+ return result;
+ msleep(INV_MPU6050_POWER_UP_TIME);
+ /* toggle power state. After reset, the sleep bit could be on
+ or off depending on the OTP settings. Toggling power would
+ make it in a definite state as well as making the hardware
+ state align with the software state */
+ result = inv_mpu6050_set_power_itg(st, false);
+ if (result)
+ return result;
+ result = inv_mpu6050_set_power_itg(st, true);
+ if (result)
+ return result;
+
+ result = inv_mpu6050_switch_engine(st, false,
+ INV_MPU6050_BIT_PWR_ACCL_STBY);
+ if (result)
+ return result;
+ result = inv_mpu6050_switch_engine(st, false,
+ INV_MPU6050_BIT_PWR_GYRO_STBY);
+ if (result)
+ return result;
+
+ return 0;
+}
+
+/**
+ * inv_mpu_probe() - probe function.
+ * @client: i2c client.
+ * @id: i2c device id.
+ *
+ * Returns 0 on success, a negative error code otherwise.
+ */
+static int inv_mpu_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct inv_mpu6050_state *st;
+ struct iio_dev *indio_dev;
+ int result;
+
+ if (!i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_READ_I2C_BLOCK |
+ I2C_FUNC_SMBUS_WRITE_I2C_BLOCK)) {
+ result = -ENOSYS;
+ goto out_no_free;
+ }
+ indio_dev = iio_device_alloc(sizeof(*st));
+ if (indio_dev == NULL) {
+ result = -ENOMEM;
+ goto out_no_free;
+ }
+ st = iio_priv(indio_dev);
+ st->client = client;
+ st->plat_data = *(struct inv_mpu6050_platform_data
+ *)dev_get_platdata(&client->dev);
+ /* power is turned on inside check chip type*/
+ result = inv_check_and_setup_chip(st, id);
+ if (result)
+ goto out_free;
+
+ result = inv_mpu6050_init_config(indio_dev);
+ if (result) {
+ dev_err(&client->dev,
+ "Could not initialize device.\n");
+ goto out_free;
+ }
+
+ i2c_set_clientdata(client, indio_dev);
+ indio_dev->dev.parent = &client->dev;
+ indio_dev->name = id->name;
+ indio_dev->channels = inv_mpu_channels;
+ indio_dev->num_channels = ARRAY_SIZE(inv_mpu_channels);
+
+ indio_dev->info = &mpu_info;
+ indio_dev->modes = INDIO_BUFFER_TRIGGERED;
+
+ result = iio_triggered_buffer_setup(indio_dev,
+ inv_mpu6050_irq_handler,
+ inv_mpu6050_read_fifo,
+ NULL);
+ if (result) {
+ dev_err(&st->client->dev, "configure buffer fail %d\n",
+ result);
+ goto out_free;
+ }
+ result = inv_mpu6050_probe_trigger(indio_dev);
+ if (result) {
+ dev_err(&st->client->dev, "trigger probe fail %d\n", result);
+ goto out_unreg_ring;
+ }
+
+ INIT_KFIFO(st->timestamps);
+ spin_lock_init(&st->time_stamp_lock);
+ result = iio_device_register(indio_dev);
+ if (result) {
+ dev_err(&st->client->dev, "IIO register fail %d\n", result);
+ goto out_remove_trigger;
+ }
+
+ return 0;
+
+out_remove_trigger:
+ inv_mpu6050_remove_trigger(st);
+out_unreg_ring:
+ iio_triggered_buffer_cleanup(indio_dev);
+out_free:
+ iio_device_free(indio_dev);
+out_no_free:
+
+ return result;
+}
+
+static int inv_mpu_remove(struct i2c_client *client)
+{
+ struct iio_dev *indio_dev = i2c_get_clientdata(client);
+ struct inv_mpu6050_state *st = iio_priv(indio_dev);
+
+ iio_device_unregister(indio_dev);
+ inv_mpu6050_remove_trigger(st);
+ iio_triggered_buffer_cleanup(indio_dev);
+ iio_device_free(indio_dev);
+
+ return 0;
+}
+#ifdef CONFIG_PM_SLEEP
+
+static int inv_mpu_resume(struct device *dev)
+{
+ return inv_mpu6050_set_power_itg(
+ iio_priv(i2c_get_clientdata(to_i2c_client(dev))), true);
+}
+
+static int inv_mpu_suspend(struct device *dev)
+{
+ return inv_mpu6050_set_power_itg(
+ iio_priv(i2c_get_clientdata(to_i2c_client(dev))), false);
+}
+static SIMPLE_DEV_PM_OPS(inv_mpu_pmops, inv_mpu_suspend, inv_mpu_resume);
+
+#define INV_MPU6050_PMOPS (&inv_mpu_pmops)
+#else
+#define INV_MPU6050_PMOPS NULL
+#endif /* CONFIG_PM_SLEEP */
+
+/*
+ * device id table is used to identify what device can be
+ * supported by this driver
+ */
+static const struct i2c_device_id inv_mpu_id[] = {
+ {"mpu6050", INV_MPU6050},
+ {}
+};
+
+MODULE_DEVICE_TABLE(i2c, inv_mpu_id);
+
+static struct i2c_driver inv_mpu_driver = {
+ .probe = inv_mpu_probe,
+ .remove = inv_mpu_remove,
+ .id_table = inv_mpu_id,
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "inv-mpu6050",
+ .pm = INV_MPU6050_PMOPS,
+ },
+};
+
+module_i2c_driver(inv_mpu_driver);
+
+MODULE_AUTHOR("Invensense Corporation");
+MODULE_DESCRIPTION("Invensense device MPU6050 driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
new file mode 100644
index 0000000..f383955
--- /dev/null
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
@@ -0,0 +1,246 @@
+/*
+* Copyright (C) 2012 Invensense, Inc.
+*
+* This software is licensed under the terms of the GNU General Public
+* License version 2, as published by the Free Software Foundation, and
+* may be copied, distributed, and modified under those terms.
+*
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+* GNU General Public License for more details.
+*/
+#include <linux/i2c.h>
+#include <linux/kfifo.h>
+#include <linux/spinlock.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/kfifo_buf.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/platform_data/invensense_mpu6050.h>
+
+/**
+ * struct inv_mpu6050_reg_map - Notable registers.
+ * @sample_rate_div: Divider applied to gyro output rate.
+ * @lpf: Configures internal low pass filter.
+ * @user_ctrl: Enables/resets the FIFO.
+ * @fifo_en: Determines which data will appear in FIFO.
+ * @gyro_config: gyro config register.
+ * @accl_config: accel config register
+ * @fifo_count_h: Upper byte of FIFO count.
+ * @fifo_r_w: FIFO register.
+ * @raw_gyro: Address of first gyro register.
+ * @raw_accl: Address of first accel register.
+ * @temperature: temperature register
+ * @int_enable: Interrupt enable register.
+ * @pwr_mgmt_1: Controls chip's power state and clock source.
+ * @pwr_mgmt_2: Controls power state of individual sensors.
+ */
+struct inv_mpu6050_reg_map {
+ u8 sample_rate_div;
+ u8 lpf;
+ u8 user_ctrl;
+ u8 fifo_en;
+ u8 gyro_config;
+ u8 accl_config;
+ u8 fifo_count_h;
+ u8 fifo_r_w;
+ u8 raw_gyro;
+ u8 raw_accl;
+ u8 temperature;
+ u8 int_enable;
+ u8 pwr_mgmt_1;
+ u8 pwr_mgmt_2;
+};
+
+/*device enum */
+enum inv_devices {
+ INV_MPU6050,
+ INV_NUM_PARTS
+};
+
+/**
+ * struct inv_mpu6050_chip_config - Cached chip configuration data.
+ * @fsr: Full scale range.
+ * @lpf: Digital low pass filter frequency.
+ * @accl_fs: accel full scale range.
+ * @enable: master enable state.
+ * @accl_fifo_enable: enable accel data output
+ * @gyro_fifo_enable: enable gyro data output
+ * @fifo_rate: FIFO update rate.
+ */
+struct inv_mpu6050_chip_config {
+ unsigned int fsr:2;
+ unsigned int lpf:3;
+ unsigned int accl_fs:2;
+ unsigned int enable:1;
+ unsigned int accl_fifo_enable:1;
+ unsigned int gyro_fifo_enable:1;
+ u16 fifo_rate;
+};
+
+/**
+ * struct inv_mpu6050_hw - Other important hardware information.
+ * @num_reg: Number of registers on device.
+ * @name: name of the chip.
+ * @reg: register map of the chip.
+ * @config: configuration of the chip.
+ */
+struct inv_mpu6050_hw {
+ u8 num_reg;
+ u8 *name;
+ const struct inv_mpu6050_reg_map *reg;
+ const struct inv_mpu6050_chip_config *config;
+};
+
+/*
+ * struct inv_mpu6050_state - Driver state variables.
+ * @TIMESTAMP_FIFO_SIZE: fifo size for timestamp.
+ * @trig: IIO trigger.
+ * @chip_config: Cached attribute information.
+ * @reg: Map of important registers.
+ * @hw: Other hardware-specific information.
+ * @chip_type: chip type.
+ * @time_stamp_lock: spin lock to time stamp.
+ * @client: i2c client handle.
+ * @plat_data: platform data.
+ * @timestamps: kfifo queue to store time stamp.
+ */
+struct inv_mpu6050_state {
+#define TIMESTAMP_FIFO_SIZE 16
+ struct iio_trigger *trig;
+ struct inv_mpu6050_chip_config chip_config;
+ const struct inv_mpu6050_reg_map *reg;
+ const struct inv_mpu6050_hw *hw;
+ enum inv_devices chip_type;
+ spinlock_t time_stamp_lock;
+ struct i2c_client *client;
+ struct inv_mpu6050_platform_data plat_data;
+ DECLARE_KFIFO(timestamps, long long, TIMESTAMP_FIFO_SIZE);
+};
+
+/*register and associated bit definition*/
+#define INV_MPU6050_REG_SAMPLE_RATE_DIV 0x19
+#define INV_MPU6050_REG_CONFIG 0x1A
+#define INV_MPU6050_REG_GYRO_CONFIG 0x1B
+#define INV_MPU6050_REG_ACCEL_CONFIG 0x1C
+
+#define INV_MPU6050_REG_FIFO_EN 0x23
+#define INV_MPU6050_BIT_ACCEL_OUT 0x08
+#define INV_MPU6050_BITS_GYRO_OUT 0x70
+
+#define INV_MPU6050_REG_INT_ENABLE 0x38
+#define INV_MPU6050_BIT_DATA_RDY_EN 0x01
+#define INV_MPU6050_BIT_DMP_INT_EN 0x02
+
+#define INV_MPU6050_REG_RAW_ACCEL 0x3B
+#define INV_MPU6050_REG_TEMPERATURE 0x41
+#define INV_MPU6050_REG_RAW_GYRO 0x43
+
+#define INV_MPU6050_REG_USER_CTRL 0x6A
+#define INV_MPU6050_BIT_FIFO_RST 0x04
+#define INV_MPU6050_BIT_DMP_RST 0x08
+#define INV_MPU6050_BIT_I2C_MST_EN 0x20
+#define INV_MPU6050_BIT_FIFO_EN 0x40
+#define INV_MPU6050_BIT_DMP_EN 0x80
+
+#define INV_MPU6050_REG_PWR_MGMT_1 0x6B
+#define INV_MPU6050_BIT_H_RESET 0x80
+#define INV_MPU6050_BIT_SLEEP 0x40
+#define INV_MPU6050_BIT_CLK_MASK 0x7
+
+#define INV_MPU6050_REG_PWR_MGMT_2 0x6C
+#define INV_MPU6050_BIT_PWR_ACCL_STBY 0x38
+#define INV_MPU6050_BIT_PWR_GYRO_STBY 0x07
+
+#define INV_MPU6050_REG_FIFO_COUNT_H 0x72
+#define INV_MPU6050_REG_FIFO_R_W 0x74
+
+#define INV_MPU6050_BYTES_PER_3AXIS_SENSOR 6
+#define INV_MPU6050_FIFO_COUNT_BYTE 2
+#define INV_MPU6050_FIFO_THRESHOLD 500
+#define INV_MPU6050_POWER_UP_TIME 100
+#define INV_MPU6050_TEMP_UP_TIME 100
+#define INV_MPU6050_SENSOR_UP_TIME 30
+#define INV_MPU6050_REG_UP_TIME 5
+
+#define INV_MPU6050_TEMP_OFFSET 12421
+#define INV_MPU6050_TEMP_SCALE 2941
+#define INV_MPU6050_MAX_GYRO_FS_PARAM 3
+#define INV_MPU6050_MAX_ACCL_FS_PARAM 3
+#define INV_MPU6050_THREE_AXIS 3
+#define INV_MPU6050_GYRO_CONFIG_FSR_SHIFT 3
+#define INV_MPU6050_ACCL_CONFIG_FSR_SHIFT 3
+
+/* 6 + 6 round up and plus 8 */
+#define INV_MPU6050_OUTPUT_DATA_SIZE 24
+
+/* init parameters */
+#define INV_MPU6050_INIT_FIFO_RATE 50
+#define INV_MPU6050_TIME_STAMP_TOR 5
+#define INV_MPU6050_MAX_FIFO_RATE 1000
+#define INV_MPU6050_MIN_FIFO_RATE 4
+#define INV_MPU6050_ONE_K_HZ 1000
+
+/* scan element definition */
+enum inv_mpu6050_scan {
+ INV_MPU6050_SCAN_ACCL_X,
+ INV_MPU6050_SCAN_ACCL_Y,
+ INV_MPU6050_SCAN_ACCL_Z,
+ INV_MPU6050_SCAN_GYRO_X,
+ INV_MPU6050_SCAN_GYRO_Y,
+ INV_MPU6050_SCAN_GYRO_Z,
+ INV_MPU6050_SCAN_TIMESTAMP,
+};
+
+enum inv_mpu6050_filter_e {
+ INV_MPU6050_FILTER_256HZ_NOLPF2 = 0,
+ INV_MPU6050_FILTER_188HZ,
+ INV_MPU6050_FILTER_98HZ,
+ INV_MPU6050_FILTER_42HZ,
+ INV_MPU6050_FILTER_20HZ,
+ INV_MPU6050_FILTER_10HZ,
+ INV_MPU6050_FILTER_5HZ,
+ INV_MPU6050_FILTER_2100HZ_NOLPF,
+ NUM_MPU6050_FILTER
+};
+
+/* IIO attribute address */
+enum INV_MPU6050_IIO_ATTR_ADDR {
+ ATTR_GYRO_MATRIX,
+ ATTR_ACCL_MATRIX,
+};
+
+enum inv_mpu6050_accl_fs_e {
+ INV_MPU6050_FS_02G = 0,
+ INV_MPU6050_FS_04G,
+ INV_MPU6050_FS_08G,
+ INV_MPU6050_FS_16G,
+ NUM_ACCL_FSR
+};
+
+enum inv_mpu6050_fsr_e {
+ INV_MPU6050_FSR_250DPS = 0,
+ INV_MPU6050_FSR_500DPS,
+ INV_MPU6050_FSR_1000DPS,
+ INV_MPU6050_FSR_2000DPS,
+ NUM_MPU6050_FSR
+};
+
+enum inv_mpu6050_clock_sel_e {
+ INV_CLK_INTERNAL = 0,
+ INV_CLK_PLL,
+ NUM_CLK
+};
+
+irqreturn_t inv_mpu6050_irq_handler(int irq, void *p);
+irqreturn_t inv_mpu6050_read_fifo(int irq, void *p);
+int inv_mpu6050_probe_trigger(struct iio_dev *indio_dev);
+void inv_mpu6050_remove_trigger(struct inv_mpu6050_state *st);
+int inv_reset_fifo(struct iio_dev *indio_dev);
+int inv_mpu6050_switch_engine(struct inv_mpu6050_state *st, bool en, u32 mask);
+int inv_mpu6050_write_reg(struct inv_mpu6050_state *st, int reg, u8 val);
+int inv_mpu6050_set_power_itg(struct inv_mpu6050_state *st, bool power_on);
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c
new file mode 100644
index 0000000..331781f
--- /dev/null
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c
@@ -0,0 +1,196 @@
+/*
+* Copyright (C) 2012 Invensense, Inc.
+*
+* This software is licensed under the terms of the GNU General Public
+* License version 2, as published by the Free Software Foundation, and
+* may be copied, distributed, and modified under those terms.
+*
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+* GNU General Public License for more details.
+*/
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+#include <linux/sysfs.h>
+#include <linux/jiffies.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/kfifo.h>
+#include <linux/poll.h>
+#include "inv_mpu_iio.h"
+
+int inv_reset_fifo(struct iio_dev *indio_dev)
+{
+ int result;
+ u8 d;
+ struct inv_mpu6050_state *st = iio_priv(indio_dev);
+
+ /* disable interrupt */
+ result = inv_mpu6050_write_reg(st, st->reg->int_enable, 0);
+ if (result) {
+ dev_err(&st->client->dev, "int_enable failed %d\n", result);
+ return result;
+ }
+ /* disable the sensor output to FIFO */
+ result = inv_mpu6050_write_reg(st, st->reg->fifo_en, 0);
+ if (result)
+ goto reset_fifo_fail;
+ /* disable fifo reading */
+ result = inv_mpu6050_write_reg(st, st->reg->user_ctrl, 0);
+ if (result)
+ goto reset_fifo_fail;
+
+ /* reset FIFO*/
+ result = inv_mpu6050_write_reg(st, st->reg->user_ctrl,
+ INV_MPU6050_BIT_FIFO_RST);
+ if (result)
+ goto reset_fifo_fail;
+ /* enable interrupt */
+ if (st->chip_config.accl_fifo_enable ||
+ st->chip_config.gyro_fifo_enable) {
+ result = inv_mpu6050_write_reg(st, st->reg->int_enable,
+ INV_MPU6050_BIT_DATA_RDY_EN);
+ if (result)
+ return result;
+ }
+ /* enable FIFO reading and I2C master interface*/
+ result = inv_mpu6050_write_reg(st, st->reg->user_ctrl,
+ INV_MPU6050_BIT_FIFO_EN);
+ if (result)
+ goto reset_fifo_fail;
+ /* enable sensor output to FIFO */
+ d = 0;
+ if (st->chip_config.gyro_fifo_enable)
+ d |= INV_MPU6050_BITS_GYRO_OUT;
+ if (st->chip_config.accl_fifo_enable)
+ d |= INV_MPU6050_BIT_ACCEL_OUT;
+ result = inv_mpu6050_write_reg(st, st->reg->fifo_en, d);
+ if (result)
+ goto reset_fifo_fail;
+
+ return 0;
+
+reset_fifo_fail:
+ dev_err(&st->client->dev, "reset fifo failed %d\n", result);
+ result = inv_mpu6050_write_reg(st, st->reg->int_enable,
+ INV_MPU6050_BIT_DATA_RDY_EN);
+
+ return result;
+}
+
+static void inv_clear_kfifo(struct inv_mpu6050_state *st)
+{
+ unsigned long flags;
+
+ /* take the spin lock sem to avoid interrupt kick in */
+ spin_lock_irqsave(&st->time_stamp_lock, flags);
+ kfifo_reset(&st->timestamps);
+ spin_unlock_irqrestore(&st->time_stamp_lock, flags);
+}
+
+/**
+ * inv_mpu6050_irq_handler() - Cache a timestamp at each data ready interrupt.
+ */
+irqreturn_t inv_mpu6050_irq_handler(int irq, void *p)
+{
+ struct iio_poll_func *pf = p;
+ struct iio_dev *indio_dev = pf->indio_dev;
+ struct inv_mpu6050_state *st = iio_priv(indio_dev);
+ s64 timestamp;
+
+ timestamp = iio_get_time_ns();
+ spin_lock(&st->time_stamp_lock);
+ kfifo_in(&st->timestamps, ×tamp, 1);
+ spin_unlock(&st->time_stamp_lock);
+
+ return IRQ_WAKE_THREAD;
+}
+
+/**
+ * inv_mpu6050_read_fifo() - Transfer data from hardware FIFO to KFIFO.
+ */
+irqreturn_t inv_mpu6050_read_fifo(int irq, void *p)
+{
+ struct iio_poll_func *pf = p;
+ struct iio_dev *indio_dev = pf->indio_dev;
+ struct inv_mpu6050_state *st = iio_priv(indio_dev);
+ size_t bytes_per_datum;
+ int result;
+ u8 data[INV_MPU6050_OUTPUT_DATA_SIZE];
+ u16 fifo_count;
+ s64 timestamp;
+ u64 *tmp;
+
+ mutex_lock(&indio_dev->mlock);
+ if (!(st->chip_config.accl_fifo_enable |
+ st->chip_config.gyro_fifo_enable))
+ goto end_session;
+ bytes_per_datum = 0;
+ if (st->chip_config.accl_fifo_enable)
+ bytes_per_datum += INV_MPU6050_BYTES_PER_3AXIS_SENSOR;
+
+ if (st->chip_config.gyro_fifo_enable)
+ bytes_per_datum += INV_MPU6050_BYTES_PER_3AXIS_SENSOR;
+
+ /*
+ * read fifo_count register to know how many bytes inside FIFO
+ * right now
+ */
+ result = i2c_smbus_read_i2c_block_data(st->client,
+ st->reg->fifo_count_h,
+ INV_MPU6050_FIFO_COUNT_BYTE, data);
+ if (result != INV_MPU6050_FIFO_COUNT_BYTE)
+ goto end_session;
+ fifo_count = be16_to_cpup((__be16 *)(&data[0]));
+ if (fifo_count < bytes_per_datum)
+ goto end_session;
+ /* fifo count can't be odd number, if it is odd, reset fifo*/
+ if (fifo_count & 1)
+ goto flush_fifo;
+ if (fifo_count > INV_MPU6050_FIFO_THRESHOLD)
+ goto flush_fifo;
+ /* Timestamp mismatch. */
+ if (kfifo_len(&st->timestamps) >
+ fifo_count / bytes_per_datum + INV_MPU6050_TIME_STAMP_TOR)
+ goto flush_fifo;
+ while (fifo_count >= bytes_per_datum) {
+ result = i2c_smbus_read_i2c_block_data(st->client,
+ st->reg->fifo_r_w,
+ bytes_per_datum, data);
+ if (result != bytes_per_datum)
+ goto flush_fifo;
+
+ result = kfifo_out(&st->timestamps, ×tamp, 1);
+ /* when there is no timestamp, put timestamp as 0 */
+ if (0 == result)
+ timestamp = 0;
+
+ tmp = (u64 *)data;
+ tmp[DIV_ROUND_UP(bytes_per_datum, 8)] = timestamp;
+ result = iio_push_to_buffers(indio_dev, data);
+ if (result)
+ goto flush_fifo;
+ fifo_count -= bytes_per_datum;
+ }
+
+end_session:
+ mutex_unlock(&indio_dev->mlock);
+ iio_trigger_notify_done(indio_dev->trig);
+
+ return IRQ_HANDLED;
+
+flush_fifo:
+ /* Flush HW and SW FIFOs. */
+ inv_reset_fifo(indio_dev);
+ inv_clear_kfifo(st);
+ mutex_unlock(&indio_dev->mlock);
+ iio_trigger_notify_done(indio_dev->trig);
+
+ return IRQ_HANDLED;
+}
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c
new file mode 100644
index 0000000..e1d0869
--- /dev/null
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c
@@ -0,0 +1,155 @@
+/*
+* Copyright (C) 2012 Invensense, Inc.
+*
+* This software is licensed under the terms of the GNU General Public
+* License version 2, as published by the Free Software Foundation, and
+* may be copied, distributed, and modified under those terms.
+*
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+* GNU General Public License for more details.
+*/
+
+#include "inv_mpu_iio.h"
+
+static void inv_scan_query(struct iio_dev *indio_dev)
+{
+ struct inv_mpu6050_state *st = iio_priv(indio_dev);
+
+ st->chip_config.gyro_fifo_enable =
+ test_bit(INV_MPU6050_SCAN_GYRO_X,
+ indio_dev->active_scan_mask) ||
+ test_bit(INV_MPU6050_SCAN_GYRO_Y,
+ indio_dev->active_scan_mask) ||
+ test_bit(INV_MPU6050_SCAN_GYRO_Z,
+ indio_dev->active_scan_mask);
+
+ st->chip_config.accl_fifo_enable =
+ test_bit(INV_MPU6050_SCAN_ACCL_X,
+ indio_dev->active_scan_mask) ||
+ test_bit(INV_MPU6050_SCAN_ACCL_Y,
+ indio_dev->active_scan_mask) ||
+ test_bit(INV_MPU6050_SCAN_ACCL_Z,
+ indio_dev->active_scan_mask);
+}
+
+/**
+ * inv_mpu6050_set_enable() - enable chip functions.
+ * @indio_dev: Device driver instance.
+ * @enable: enable/disable
+ */
+static int inv_mpu6050_set_enable(struct iio_dev *indio_dev, bool enable)
+{
+ struct inv_mpu6050_state *st = iio_priv(indio_dev);
+ int result;
+
+ if (enable) {
+ result = inv_mpu6050_set_power_itg(st, true);
+ if (result)
+ return result;
+ inv_scan_query(indio_dev);
+ if (st->chip_config.gyro_fifo_enable) {
+ result = inv_mpu6050_switch_engine(st, true,
+ INV_MPU6050_BIT_PWR_GYRO_STBY);
+ if (result)
+ return result;
+ }
+ if (st->chip_config.accl_fifo_enable) {
+ result = inv_mpu6050_switch_engine(st, true,
+ INV_MPU6050_BIT_PWR_ACCL_STBY);
+ if (result)
+ return result;
+ }
+ result = inv_reset_fifo(indio_dev);
+ if (result)
+ return result;
+ } else {
+ result = inv_mpu6050_write_reg(st, st->reg->fifo_en, 0);
+ if (result)
+ return result;
+
+ result = inv_mpu6050_write_reg(st, st->reg->int_enable, 0);
+ if (result)
+ return result;
+
+ result = inv_mpu6050_write_reg(st, st->reg->user_ctrl, 0);
+ if (result)
+ return result;
+
+ result = inv_mpu6050_switch_engine(st, false,
+ INV_MPU6050_BIT_PWR_GYRO_STBY);
+ if (result)
+ return result;
+
+ result = inv_mpu6050_switch_engine(st, false,
+ INV_MPU6050_BIT_PWR_ACCL_STBY);
+ if (result)
+ return result;
+ result = inv_mpu6050_set_power_itg(st, false);
+ if (result)
+ return result;
+ }
+ st->chip_config.enable = enable;
+
+ return 0;
+}
+
+/**
+ * inv_mpu_data_rdy_trigger_set_state() - set data ready interrupt state
+ * @trig: Trigger instance
+ * @state: Desired trigger state
+ */
+static int inv_mpu_data_rdy_trigger_set_state(struct iio_trigger *trig,
+ bool state)
+{
+ return inv_mpu6050_set_enable(trig->private_data, state);
+}
+
+static const struct iio_trigger_ops inv_mpu_trigger_ops = {
+ .owner = THIS_MODULE,
+ .set_trigger_state = &inv_mpu_data_rdy_trigger_set_state,
+};
+
+int inv_mpu6050_probe_trigger(struct iio_dev *indio_dev)
+{
+ int ret;
+ struct inv_mpu6050_state *st = iio_priv(indio_dev);
+
+ st->trig = iio_trigger_alloc("%s-dev%d",
+ indio_dev->name,
+ indio_dev->id);
+ if (st->trig == NULL) {
+ ret = -ENOMEM;
+ goto error_ret;
+ }
+ ret = request_irq(st->client->irq, &iio_trigger_generic_data_rdy_poll,
+ IRQF_TRIGGER_RISING,
+ "inv_mpu",
+ st->trig);
+ if (ret)
+ goto error_free_trig;
+ st->trig->dev.parent = &st->client->dev;
+ st->trig->private_data = indio_dev;
+ st->trig->ops = &inv_mpu_trigger_ops;
+ ret = iio_trigger_register(st->trig);
+ if (ret)
+ goto error_free_irq;
+ indio_dev->trig = st->trig;
+
+ return 0;
+
+error_free_irq:
+ free_irq(st->client->irq, st->trig);
+error_free_trig:
+ iio_trigger_free(st->trig);
+error_ret:
+ return ret;
+}
+
+void inv_mpu6050_remove_trigger(struct inv_mpu6050_state *st)
+{
+ iio_trigger_unregister(st->trig);
+ free_irq(st->client->irq, st->trig);
+ iio_trigger_free(st->trig);
+}
diff --git a/include/linux/platform_data/invensense_mpu6050.h b/include/linux/platform_data/invensense_mpu6050.h
new file mode 100644
index 0000000..ad3aa7b
--- /dev/null
+++ b/include/linux/platform_data/invensense_mpu6050.h
@@ -0,0 +1,31 @@
+/*
+* Copyright (C) 2012 Invensense, Inc.
+*
+* This software is licensed under the terms of the GNU General Public
+* License version 2, as published by the Free Software Foundation, and
+* may be copied, distributed, and modified under those terms.
+*
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+* GNU General Public License for more details.
+*/
+
+#ifndef __INV_MPU6050_PLATFORM_H_
+#define __INV_MPU6050_PLATFORM_H_
+
+/**
+ * struct inv_mpu6050_platform_data - Platform data for the mpu driver
+ * @orientation: Orientation matrix of the chip
+ *
+ * Contains platform specific information on how to configure the MPU6050 to
+ * work on this platform. The orientation matricies are 3x3 rotation matricies
+ * that are applied to the data to rotate from the mounting orientation to the
+ * platform orientation. The values must be one of 0, 1, or -1 and each row and
+ * column should have exactly 1 non-zero value.
+ */
+struct inv_mpu6050_platform_data {
+ __s8 orientation[9];
+};
+
+#endif