i2c-core: Some style cleanups
Some lines over 80.
The printk(KERN_ERR ... ) should be dev_err.
And some blankspace should be deleted.
Signed-off-by: Zhenwen Xu <helight.xu@gmail.com>
Signed-off-by: Jean Delvare <khlai@linux-fr.org>
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index e361033..b6f3a0d 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -152,7 +152,7 @@
driver->shutdown(to_i2c_client(dev));
}
-static int i2c_device_suspend(struct device * dev, pm_message_t mesg)
+static int i2c_device_suspend(struct device *dev, pm_message_t mesg)
{
struct i2c_driver *driver;
@@ -164,7 +164,7 @@
return driver->suspend(to_i2c_client(dev), mesg);
}
-static int i2c_device_resume(struct device * dev)
+static int i2c_device_resume(struct device *dev)
{
struct i2c_driver *driver;
@@ -187,13 +187,15 @@
kfree(to_i2c_client(dev));
}
-static ssize_t show_client_name(struct device *dev, struct device_attribute *attr, char *buf)
+static ssize_t
+show_client_name(struct device *dev, struct device_attribute *attr, char *buf)
{
struct i2c_client *client = to_i2c_client(dev);
return sprintf(buf, "%s\n", client->name);
}
-static ssize_t show_modalias(struct device *dev, struct device_attribute *attr, char *buf)
+static ssize_t
+show_modalias(struct device *dev, struct device_attribute *attr, char *buf)
{
struct i2c_client *client = to_i2c_client(dev);
return sprintf(buf, "%s%s\n", I2C_MODULE_PREFIX, client->name);
@@ -365,8 +367,7 @@
* This returns the new i2c client, which should be saved for later use with
* i2c_unregister_device(); or NULL to indicate an error.
*/
-struct i2c_client *
-i2c_new_dummy(struct i2c_adapter *adapter, u16 address)
+struct i2c_client *i2c_new_dummy(struct i2c_adapter *adapter, u16 address)
{
struct i2c_board_info info = {
I2C_BOARD_INFO("dummy", address),
@@ -413,8 +414,8 @@
if (devinfo->busnum == adapter->nr
&& !i2c_new_device(adapter,
&devinfo->board_info))
- printk(KERN_ERR "i2c-core: can't create i2c%d-%04x\n",
- i2c_adapter_id(adapter),
+ dev_err(&adapter->dev,
+ "Can't create device at 0x%02x\n",
devinfo->board_info.addr);
}
mutex_unlock(&__i2c_board_lock);
@@ -1020,7 +1021,7 @@
* Note that there is no requirement that each message be sent to
* the same slave address, although that is the most common model.
*/
-int i2c_transfer(struct i2c_adapter * adap, struct i2c_msg *msgs, int num)
+int i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
{
int ret;
@@ -1527,8 +1528,7 @@
/* The SMBus parts */
#define POLY (0x1070U << 3)
-static u8
-crc8(u16 data)
+static u8 crc8(u16 data)
{
int i;
@@ -1992,9 +1992,9 @@
* This executes an SMBus protocol operation, and returns a negative
* errno code else zero on success.
*/
-s32 i2c_smbus_xfer(struct i2c_adapter * adapter, u16 addr, unsigned short flags,
+s32 i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr, unsigned short flags,
char read_write, u8 command, int protocol,
- union i2c_smbus_data * data)
+ union i2c_smbus_data *data)
{
s32 res;