Merge HEAD from ../from-linus
diff --git a/Makefile b/Makefile
index 2c14861..300f61f 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 13
-EXTRAVERSION =-rc6
+EXTRAVERSION =-rc7
NAME=Woozy Numbat
# *DOCUMENTATION*
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
index 083c5df..189d5ea 100644
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -522,7 +522,7 @@
config NUMA
bool "NUMA Support (EXPERIMENTAL)"
- depends on DISCONTIGMEM
+ depends on DISCONTIGMEM && BROKEN
help
Say Y to compile the kernel to support NUMA (Non-Uniform Memory
Access). This option is for configuring high-end multiprocessor
diff --git a/arch/alpha/kernel/smp.c b/arch/alpha/kernel/smp.c
index 8f1e785..e211aa7 100644
--- a/arch/alpha/kernel/smp.c
+++ b/arch/alpha/kernel/smp.c
@@ -1036,7 +1036,7 @@
" br 1b\n"
".previous"
: "=r" (tmp), "=m" (lock->lock), "=r" (stuck)
- : "1" (lock->lock), "2" (stuck) : "memory");
+ : "m" (lock->lock), "2" (stuck) : "memory");
if (stuck < 0) {
printk(KERN_WARNING
@@ -1115,7 +1115,7 @@
".previous"
: "=m" (*(volatile int *)lock), "=&r" (regx), "=&r" (regy),
"=&r" (stuck_lock), "=&r" (stuck_reader)
- : "0" (*(volatile int *)lock), "3" (stuck_lock), "4" (stuck_reader) : "memory");
+ : "m" (*(volatile int *)lock), "3" (stuck_lock), "4" (stuck_reader) : "memory");
if (stuck_lock < 0) {
printk(KERN_WARNING "write_lock stuck at %p\n", inline_pc);
@@ -1153,7 +1153,7 @@
" br 1b\n"
".previous"
: "=m" (*(volatile int *)lock), "=&r" (regx), "=&r" (stuck_lock)
- : "0" (*(volatile int *)lock), "2" (stuck_lock) : "memory");
+ : "m" (*(volatile int *)lock), "2" (stuck_lock) : "memory");
if (stuck_lock < 0) {
printk(KERN_WARNING "read_lock stuck at %p\n", inline_pc);
diff --git a/arch/alpha/oprofile/common.c b/arch/alpha/oprofile/common.c
index 908eb4a..ba788cf 100644
--- a/arch/alpha/oprofile/common.c
+++ b/arch/alpha/oprofile/common.c
@@ -65,7 +65,7 @@
model->reg_setup(®, ctr, &sys);
/* Configure the registers on all cpus. */
- smp_call_function(model->cpu_setup, ®, 0, 1);
+ (void)smp_call_function(model->cpu_setup, ®, 0, 1);
model->cpu_setup(®);
return 0;
}
@@ -86,7 +86,7 @@
static int
op_axp_start(void)
{
- smp_call_function(op_axp_cpu_start, NULL, 0, 1);
+ (void)smp_call_function(op_axp_cpu_start, NULL, 0, 1);
op_axp_cpu_start(NULL);
return 0;
}
@@ -101,7 +101,7 @@
static void
op_axp_stop(void)
{
- smp_call_function(op_axp_cpu_stop, NULL, 0, 1);
+ (void)smp_call_function(op_axp_cpu_stop, NULL, 0, 1);
op_axp_cpu_stop(NULL);
}
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 7bc4a58..c65c6eb 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -310,7 +310,7 @@
config SMP
bool "Symmetric Multi-Processing (EXPERIMENTAL)"
- depends on EXPERIMENTAL #&& n
+ depends on EXPERIMENTAL && BROKEN #&& n
help
This enables support for systems with more than one CPU. If you have
a system with only one CPU, like most personal computers, say N. If
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index d571c37..4554c96 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -617,7 +617,7 @@
notify_die("unknown data abort code", regs, &info, instr, 0);
}
-volatile void __bug(const char *file, int line, void *data)
+void __attribute__((noreturn)) __bug(const char *file, int line, void *data)
{
printk(KERN_CRIT"kernel BUG at %s:%d!", file, line);
if (data)
diff --git a/arch/arm/nwfpe/fpopcode.h b/arch/arm/nwfpe/fpopcode.h
index 8035f4f..1777e92 100644
--- a/arch/arm/nwfpe/fpopcode.h
+++ b/arch/arm/nwfpe/fpopcode.h
@@ -370,20 +370,20 @@
#define getRoundingMode(opcode) ((opcode & MASK_ROUNDING_MODE) >> 5)
#ifdef CONFIG_FPE_NWFPE_XP
-static inline const floatx80 getExtendedConstant(const unsigned int nIndex)
+static inline __attribute_pure__ floatx80 getExtendedConstant(const unsigned int nIndex)
{
extern const floatx80 floatx80Constant[];
return floatx80Constant[nIndex];
}
#endif
-static inline const float64 getDoubleConstant(const unsigned int nIndex)
+static inline __attribute_pure__ float64 getDoubleConstant(const unsigned int nIndex)
{
extern const float64 float64Constant[];
return float64Constant[nIndex];
}
-static inline const float32 getSingleConstant(const unsigned int nIndex)
+static inline __attribute_pure__ float32 getSingleConstant(const unsigned int nIndex)
{
extern const float32 float32Constant[];
return float32Constant[nIndex];
diff --git a/arch/i386/kernel/traps.c b/arch/i386/kernel/traps.c
index a61f33d..cd2d5d5 100644
--- a/arch/i386/kernel/traps.c
+++ b/arch/i386/kernel/traps.c
@@ -803,15 +803,17 @@
*/
cwd = get_fpu_cwd(task);
swd = get_fpu_swd(task);
- switch (((~cwd) & swd & 0x3f) | (swd & 0x240)) {
+ switch (swd & ~cwd & 0x3f) {
case 0x000:
default:
break;
case 0x001: /* Invalid Op */
- case 0x041: /* Stack Fault */
- case 0x241: /* Stack Fault | Direction */
+ /*
+ * swd & 0x240 == 0x040: Stack Underflow
+ * swd & 0x240 == 0x240: Stack Overflow
+ * User must clear the SF bit (0x40) if set
+ */
info.si_code = FPE_FLTINV;
- /* Should we clear the SF or let user space do it ???? */
break;
case 0x002: /* Denormalize */
case 0x010: /* Underflow */
diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c
index 54d9ed4..f9472c5 100644
--- a/arch/ia64/pci/pci.c
+++ b/arch/ia64/pci/pci.c
@@ -380,6 +380,7 @@
res->start = region->start + offset;
res->end = region->end + offset;
}
+EXPORT_SYMBOL(pcibios_bus_to_resource);
static int __devinit is_valid_resource(struct pci_dev *dev, int idx)
{
diff --git a/arch/m32r/Kconfig b/arch/m32r/Kconfig
index 7772951..7622d4e 100644
--- a/arch/m32r/Kconfig
+++ b/arch/m32r/Kconfig
@@ -269,7 +269,7 @@
# Common NUMA Features
config NUMA
bool "Numa Memory Allocation Support"
- depends on SMP
+ depends on SMP && BROKEN
default n
# turning this on wastes a bunch of space.
@@ -286,6 +286,7 @@
config PCI
bool "PCI support"
+ depends on BROKEN
default n
help
Find out whether you have a PCI motherboard. PCI is the name of a
diff --git a/arch/m32r/Kconfig.debug b/arch/m32r/Kconfig.debug
index 3103972..bbf711b 100644
--- a/arch/m32r/Kconfig.debug
+++ b/arch/m32r/Kconfig.debug
@@ -20,7 +20,7 @@
config DEBUG_PAGEALLOC
bool "Page alloc debugging"
- depends on DEBUG_KERNEL
+ depends on DEBUG_KERNEL && BROKEN
help
Unmap pages from the kernel linear mapping after free_pages().
This results in a large slowdown, but helps to find certain types
diff --git a/arch/m32r/kernel/setup_m32700ut.c b/arch/m32r/kernel/setup_m32700ut.c
index a146b24..708634b 100644
--- a/arch/m32r/kernel/setup_m32700ut.c
+++ b/arch/m32r/kernel/setup_m32700ut.c
@@ -30,9 +30,11 @@
typedef struct {
unsigned long icucr; /* ICU Control Register */
} icu_data_t;
+static icu_data_t icu_data[M32700UT_NUM_CPU_IRQ];
+#else
+icu_data_t icu_data[M32700UT_NUM_CPU_IRQ];
#endif /* CONFIG_SMP */
-static icu_data_t icu_data[M32700UT_NUM_CPU_IRQ];
static void disable_m32700ut_irq(unsigned int irq)
{
diff --git a/arch/m32r/kernel/setup_opsput.c b/arch/m32r/kernel/setup_opsput.c
index f0301f5..d7b7ec6 100644
--- a/arch/m32r/kernel/setup_opsput.c
+++ b/arch/m32r/kernel/setup_opsput.c
@@ -31,9 +31,11 @@
typedef struct {
unsigned long icucr; /* ICU Control Register */
} icu_data_t;
+static icu_data_t icu_data[OPSPUT_NUM_CPU_IRQ];
+#else
+icu_data_t icu_data[OPSPUT_NUM_CPU_IRQ];
#endif /* CONFIG_SMP */
-static icu_data_t icu_data[OPSPUT_NUM_CPU_IRQ];
static void disable_opsput_irq(unsigned int irq)
{
diff --git a/arch/m32r/kernel/smpboot.c b/arch/m32r/kernel/smpboot.c
index f9a0e72..640d592 100644
--- a/arch/m32r/kernel/smpboot.c
+++ b/arch/m32r/kernel/smpboot.c
@@ -91,6 +91,7 @@
/* which physical physical ID maps to which logical CPU number */
static volatile int physid_2_cpu[NR_CPUS];
+#define physid_to_cpu(physid) physid_2_cpu[physid]
/* which logical CPU number maps to which physical ID */
volatile int cpu_2_physid[NR_CPUS];
diff --git a/arch/m32r/lib/csum_partial_copy.c b/arch/m32r/lib/csum_partial_copy.c
index c871b46..ddb16a8 100644
--- a/arch/m32r/lib/csum_partial_copy.c
+++ b/arch/m32r/lib/csum_partial_copy.c
@@ -58,3 +58,4 @@
return csum_partial(dst, len-missing, sum);
}
EXPORT_SYMBOL(csum_partial_copy_from_user);
+EXPORT_SYMBOL(csum_partial);
diff --git a/arch/m32r/mm/discontig.c b/arch/m32r/mm/discontig.c
index 1d1a01e..08e7279 100644
--- a/arch/m32r/mm/discontig.c
+++ b/arch/m32r/mm/discontig.c
@@ -12,12 +12,14 @@
#include <linux/mmzone.h>
#include <linux/initrd.h>
#include <linux/nodemask.h>
+#include <linux/module.h>
#include <asm/setup.h>
extern char _end[];
struct pglist_data *node_data[MAX_NUMNODES];
+EXPORT_SYMBOL(node_data);
static bootmem_data_t node_bdata[MAX_NUMNODES] __initdata;
pg_data_t m32r_node_data[MAX_NUMNODES];
diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig
index f6db3b3..e6fa1d1 100644
--- a/arch/ppc/Kconfig
+++ b/arch/ppc/Kconfig
@@ -911,6 +911,7 @@
default y if PPC_PREP
config SMP
+ depends on PPC_STD_MMU
bool "Symmetric multi-processing support"
---help---
This enables support for systems with more than one CPU. If you have
@@ -930,7 +931,7 @@
config IRQ_ALL_CPUS
bool "Distribute interrupts on all CPUs by default"
- depends on SMP
+ depends on SMP && !MV64360
help
This option gives the kernel permission to distribute IRQs across
multiple CPUs. Saying N here will route all IRQs to the first
@@ -1121,7 +1122,9 @@
source "drivers/zorro/Kconfig"
+if !44x || BROKEN
source kernel/power/Kconfig
+endif
config SECCOMP
bool "Enable seccomp to safely compute untrusted bytecode"
diff --git a/arch/ppc/platforms/4xx/Kconfig b/arch/ppc/platforms/4xx/Kconfig
index f7c0457..805dd98 100644
--- a/arch/ppc/platforms/4xx/Kconfig
+++ b/arch/ppc/platforms/4xx/Kconfig
@@ -3,6 +3,11 @@
depends on 40x || 44x
default y
+config WANT_EARLY_SERIAL
+ bool
+ select SERIAL_8250
+ default n
+
menu "IBM 4xx options"
depends on 4xx
@@ -18,6 +23,7 @@
config BUBINGA
bool "Bubinga"
+ select WANT_EARLY_SERIAL
help
This option enables support for the IBM 405EP evaluation board.
@@ -70,21 +76,25 @@
config BAMBOO
bool "Bamboo"
+ select WANT_EARLY_SERIAL
help
This option enables support for the IBM PPC440EP evaluation board.
config EBONY
bool "Ebony"
+ select WANT_EARLY_SERIAL
help
This option enables support for the IBM PPC440GP evaluation board.
config LUAN
bool "Luan"
+ select WANT_EARLY_SERIAL
help
This option enables support for the IBM PPC440SP evaluation board.
config OCOTEA
bool "Ocotea"
+ select WANT_EARLY_SERIAL
help
This option enables support for the IBM PPC440GX evaluation board.
@@ -230,10 +240,6 @@
depends on 4xx
default y
-config PM
- bool "Power Management support (EXPERIMENTAL)"
- depends on 4xx && EXPERIMENTAL
-
choice
prompt "TTYS0 device and default console"
depends on 40x
diff --git a/arch/ppc64/kernel/setup.c b/arch/ppc64/kernel/setup.c
index 687e855..e9c24d2 100644
--- a/arch/ppc64/kernel/setup.c
+++ b/arch/ppc64/kernel/setup.c
@@ -706,6 +706,8 @@
local_irq_disable();
while (1) ;
}
+/* Used by the G5 thermal driver */
+EXPORT_SYMBOL_GPL(machine_power_off);
void machine_halt(void)
{
diff --git a/arch/s390/kernel/cpcmd.c b/arch/s390/kernel/cpcmd.c
index 2006214..d47fecb 100644
--- a/arch/s390/kernel/cpcmd.c
+++ b/arch/s390/kernel/cpcmd.c
@@ -46,9 +46,9 @@
"lra 3,0(%4)\n"
"lr 5,%5\n"
"diag 2,4,0x8\n"
- "brc 8, .Litfits\n"
+ "brc 8, 1f\n"
"ar 5, %5\n"
- ".Litfits: \n"
+ "1: \n"
"lr %0,4\n"
"lr %1,5\n"
: "=d" (return_code), "=d" (return_len)
@@ -64,9 +64,9 @@
"sam31\n"
"diag 2,4,0x8\n"
"sam64\n"
- "brc 8, .Litfits\n"
+ "brc 8, 1f\n"
"agr 5, %5\n"
- ".Litfits: \n"
+ "1: \n"
"lgr %0,4\n"
"lgr %1,5\n"
: "=d" (return_code), "=d" (return_len)
diff --git a/arch/sparc64/kernel/pci.c b/arch/sparc64/kernel/pci.c
index bba140d..f21c993 100644
--- a/arch/sparc64/kernel/pci.c
+++ b/arch/sparc64/kernel/pci.c
@@ -540,6 +540,7 @@
pbm->parent->resource_adjust(pdev, res, root);
}
+EXPORT_SYMBOL(pcibios_bus_to_resource);
char * __init pcibios_setup(char *str)
{
diff --git a/arch/x86_64/defconfig b/arch/x86_64/defconfig
index b95c6cf..bf57e23 100644
--- a/arch/x86_64/defconfig
+++ b/arch/x86_64/defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-rc3
-# Fri Jul 22 16:47:31 2005
+# Linux kernel version: 2.6.13-rc6-git3
+# Fri Aug 12 16:40:34 2005
#
CONFIG_X86_64=y
CONFIG_64BIT=y
@@ -280,10 +280,6 @@
# Network testing
#
# CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
@@ -459,6 +455,7 @@
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
CONFIG_SCSI_SATA=y
+# CONFIG_SCSI_SATA_AHCI is not set
# CONFIG_SCSI_SATA_SVW is not set
CONFIG_SCSI_ATA_PIIX=y
# CONFIG_SCSI_SATA_NV is not set
@@ -488,6 +485,7 @@
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA24XX is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
@@ -508,9 +506,11 @@
#
# Fusion MPT device support
#
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
+CONFIG_FUSION=y
+CONFIG_FUSION_SPI=y
# CONFIG_FUSION_FC is not set
+CONFIG_FUSION_MAX_SGE=128
+# CONFIG_FUSION_CTL is not set
#
# IEEE 1394 (FireWire) support
@@ -581,6 +581,7 @@
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=y
+# CONFIG_E1000_NAPI is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -620,6 +621,10 @@
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_RX is not set
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
#
# ISDN subsystem
diff --git a/arch/x86_64/pci/k8-bus.c b/arch/x86_64/pci/k8-bus.c
index c2c38b5..d80c323 100644
--- a/arch/x86_64/pci/k8-bus.c
+++ b/arch/x86_64/pci/k8-bus.c
@@ -47,13 +47,22 @@
* if there are no busses hanging off of the current
* ldt link then both the secondary and subordinate
* bus number fields are set to 0.
+ *
+ * RED-PEN
+ * This is slightly broken because it assumes
+ * HT node IDs == Linux node ids, which is not always
+ * true. However it is probably mostly true.
*/
if (!(SECONDARY_LDT_BUS_NUMBER(ldtbus) == 0
&& SUBORDINATE_LDT_BUS_NUMBER(ldtbus) == 0)) {
for (j = SECONDARY_LDT_BUS_NUMBER(ldtbus);
j <= SUBORDINATE_LDT_BUS_NUMBER(ldtbus);
- j++)
- pci_bus_to_node[j] = NODE_ID(nid);
+ j++) {
+ int node = NODE_ID(nid);
+ if (!node_online(node))
+ node = 0;
+ pci_bus_to_node[j] = node;
+ }
}
}
}
diff --git a/drivers/block/cfq-iosched.c b/drivers/block/cfq-iosched.c
index 2435a7c..cd056e7 100644
--- a/drivers/block/cfq-iosched.c
+++ b/drivers/block/cfq-iosched.c
@@ -47,7 +47,7 @@
/*
* disable queueing at the driver/hardware level
*/
-static int cfq_max_depth = 1;
+static int cfq_max_depth = 2;
/*
* for the hash of cfqq inside the cfqd
@@ -385,9 +385,15 @@
return crq2;
if (crq2 == NULL)
return crq1;
- if (cfq_crq_requeued(crq1))
+
+ if (cfq_crq_requeued(crq1) && !cfq_crq_requeued(crq2))
return crq1;
- if (cfq_crq_requeued(crq2))
+ else if (cfq_crq_requeued(crq2) && !cfq_crq_requeued(crq1))
+ return crq2;
+
+ if (cfq_crq_is_sync(crq1) && !cfq_crq_is_sync(crq2))
+ return crq1;
+ else if (cfq_crq_is_sync(crq2) && !cfq_crq_is_sync(crq1))
return crq2;
s1 = crq1->request->sector;
@@ -1769,18 +1775,23 @@
cfq_crq_enqueued(struct cfq_data *cfqd, struct cfq_queue *cfqq,
struct cfq_rq *crq)
{
- const int sync = cfq_crq_is_sync(crq);
+ struct cfq_io_context *cic;
cfqq->next_crq = cfq_choose_req(cfqd, cfqq->next_crq, crq);
- if (sync) {
- struct cfq_io_context *cic = crq->io_context;
+ /*
+ * we never wait for an async request and we don't allow preemption
+ * of an async request. so just return early
+ */
+ if (!cfq_crq_is_sync(crq))
+ return;
- cfq_update_io_thinktime(cfqd, cic);
- cfq_update_idle_window(cfqd, cfqq, cic);
+ cic = crq->io_context;
- cic->last_queue = jiffies;
- }
+ cfq_update_io_thinktime(cfqd, cic);
+ cfq_update_idle_window(cfqd, cfqq, cic);
+
+ cic->last_queue = jiffies;
if (cfqq == cfqd->active_queue) {
/*
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 4f27e55..7333b41 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -80,7 +80,7 @@
config COMPUTONE
tristate "Computone IntelliPort Plus serial support"
- depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP
+ depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP && (BROKEN || !SPARC32)
---help---
This driver supports the entire family of Intelliport II/Plus
controllers with the exception of the MicroChannel controllers and
@@ -138,7 +138,7 @@
config DIGIEPCA
tristate "Digiboard Intelligent Async Support"
- depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP
+ depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP && (!64BIT || BROKEN)
---help---
This is a driver for Digi International's Xx, Xeve, and Xem series
of cards which provide multiple serial ports. You would need
@@ -208,7 +208,7 @@
config SYNCLINKMP
tristate "SyncLink Multiport support"
- depends on SERIAL_NONSTANDARD
+ depends on SERIAL_NONSTANDARD && (BROKEN || !SPARC32)
help
Enable support for the SyncLink Multiport (2 or 4 ports)
serial adapter, running asynchronous and HDLC communications up
@@ -735,7 +735,7 @@
config GEN_RTC
tristate "Generic /dev/rtc emulation"
- depends on RTC!=y && !IA64 && !ARM && !PPC64
+ depends on RTC!=y && !IA64 && !ARM && !PPC64 && !M32R && !SPARC32
---help---
If you say Y here and create a character special file /dev/rtc with
major number 10 and minor number 135 using mknod ("man mknod"), you
diff --git a/drivers/infiniband/Kconfig b/drivers/infiniband/Kconfig
index 79c8e2d..32cdfb3 100644
--- a/drivers/infiniband/Kconfig
+++ b/drivers/infiniband/Kconfig
@@ -1,6 +1,7 @@
menu "InfiniBand support"
config INFINIBAND
+ depends on PCI || BROKEN
tristate "InfiniBand support"
---help---
Core support for InfiniBand (IB). Make sure to also select
diff --git a/drivers/isdn/hisax/Kconfig b/drivers/isdn/hisax/Kconfig
index 6c7b8bf..801c98f 100644
--- a/drivers/isdn/hisax/Kconfig
+++ b/drivers/isdn/hisax/Kconfig
@@ -134,6 +134,7 @@
config HISAX_FRITZPCI
bool "AVM PnP/PCI (Fritz!PnP/PCI)"
+ depends on BROKEN || !PPC64
help
This enables HiSax support for the AVM "Fritz!PnP" and "Fritz!PCI".
See <file:Documentation/isdn/README.HiSax> on how to configure it.
diff --git a/drivers/macintosh/Kconfig b/drivers/macintosh/Kconfig
index 65ab64c..bc3e096 100644
--- a/drivers/macintosh/Kconfig
+++ b/drivers/macintosh/Kconfig
@@ -103,7 +103,7 @@
# on non-powerbook machines (but only on PMU based ones AFAIK)
config PMAC_BACKLIGHT
bool "Backlight control for LCD screens"
- depends on ADB_PMU
+ depends on ADB_PMU && (BROKEN || !PPC64)
help
Say Y here to build in code to manage the LCD backlight on a
Macintosh PowerBook. With this code, the backlight will be turned
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index ac81e5e..3f57423 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -356,7 +356,7 @@
config VIDEO_M32R_AR_M64278
tristate "Use Colour AR module M64278(VGA)"
- depends on VIDEO_M32R_AR
+ depends on VIDEO_M32R_AR && PLAT_M32700UT
---help---
Say Y here to use the Renesas M64278E-800 camera module,
which supports VGA(640x480 pixcels) size of images.
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 8a835eb..8edb693 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1145,7 +1145,7 @@
be called ibmveth.
config IBM_EMAC
- tristate "IBM PPC4xx EMAC driver support"
+ bool "IBM PPC4xx EMAC driver support"
depends on 4xx
select CRC32
---help---
@@ -1154,7 +1154,7 @@
config IBM_EMAC_ERRMSG
bool "Verbose error messages"
- depends on IBM_EMAC
+ depends on IBM_EMAC && BROKEN
config IBM_EMAC_RXB
int "Number of receive buffers"
diff --git a/drivers/net/ibm_emac/ibm_emac_core.c b/drivers/net/ibm_emac/ibm_emac_core.c
index 6482d99..c7fb367 100644
--- a/drivers/net/ibm_emac/ibm_emac_core.c
+++ b/drivers/net/ibm_emac/ibm_emac_core.c
@@ -1712,11 +1712,10 @@
};
#ifdef CONFIG_NET_POLL_CONTROLLER
-static int emac_netpoll(struct net_device *ndev)
+static void emac_netpoll(struct net_device *ndev)
{
emac_rxeob_dev((void *)ndev, 0);
emac_txeob_dev((void *)ndev, 0);
- return 0;
}
#endif
diff --git a/drivers/net/tokenring/Kconfig b/drivers/net/tokenring/Kconfig
index 23d0fa4..7e99e9f 100644
--- a/drivers/net/tokenring/Kconfig
+++ b/drivers/net/tokenring/Kconfig
@@ -84,7 +84,7 @@
config TMS380TR
tristate "Generic TMS380 Token Ring ISA/PCI adapter support"
- depends on TR && (PCI || ISA)
+ depends on TR && (PCI || ISA && ISA_DMA_API)
select FW_LOADER
---help---
This driver provides generic support for token ring adapters
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index 1d3231c..ec3f75a 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -270,7 +270,7 @@
config AIRO_CS
tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards"
- depends on NET_RADIO && PCMCIA
+ depends on NET_RADIO && PCMCIA && (BROKEN || !M32R)
---help---
This is the standard Linux driver to support Cisco/Aironet PCMCIA
802.11 wireless cards. This driver is the same as the Aironet
diff --git a/drivers/parport/Kconfig b/drivers/parport/Kconfig
index 16a2e6a..725a141 100644
--- a/drivers/parport/Kconfig
+++ b/drivers/parport/Kconfig
@@ -34,7 +34,7 @@
config PARPORT_PC
tristate "PC-style hardware"
- depends on PARPORT && (!SPARC64 || PCI) && !SPARC32
+ depends on PARPORT && (!SPARC64 || PCI) && !SPARC32 && !M32R
---help---
You should say Y here if you have a PC-style parallel port. All
IBM PC compatible computers and some Alphas have PC-style
diff --git a/drivers/pcmcia/pcmcia_resource.c b/drivers/pcmcia/pcmcia_resource.c
index 6f9fdb2..599b116 100644
--- a/drivers/pcmcia/pcmcia_resource.c
+++ b/drivers/pcmcia/pcmcia_resource.c
@@ -41,6 +41,7 @@
#ifdef CONFIG_PCMCIA_PROBE
+#include <asm/irq.h>
/* mask of IRQs already reserved by other cards, we should avoid using them */
static u8 pcmcia_used_irq[NR_IRQS];
#endif
diff --git a/drivers/s390/cio/qdio.c b/drivers/s390/cio/qdio.c
index d36258d..533f90c 100644
--- a/drivers/s390/cio/qdio.c
+++ b/drivers/s390/cio/qdio.c
@@ -230,7 +230,7 @@
}
/* locked by the locks in qdio_activate and qdio_cleanup */
-static __u32 * volatile
+static __u32 volatile *
qdio_get_indicator(void)
{
int i;
diff --git a/drivers/s390/crypto/z90crypt.h b/drivers/s390/crypto/z90crypt.h
index 82a1d97..0a3bb5a 100644
--- a/drivers/s390/crypto/z90crypt.h
+++ b/drivers/s390/crypto/z90crypt.h
@@ -36,15 +36,6 @@
#define z90crypt_VARIANT 2 // 2 = added PCIXCC MCL3 and CEX2C support
/**
- * If we are not using the sparse checker, __user has no use.
- */
-#ifdef __CHECKER__
-# define __user __attribute__((noderef, address_space(1)))
-#else
-# define __user
-#endif
-
-/**
* struct ica_rsa_modexpo
*
* Requirements:
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index f1e8c42..12c208f 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -1696,7 +1696,7 @@
config MAC_SCSI
bool "Macintosh NCR5380 SCSI"
- depends on MAC && SCSI
+ depends on MAC && SCSI=y
help
This is the NCR 5380 SCSI controller included on most of the 68030
based Macintoshes. If you have one of these say Y and read the
@@ -1717,7 +1717,7 @@
config MVME147_SCSI
bool "WD33C93 SCSI driver for MVME147"
- depends on MVME147 && SCSI
+ depends on MVME147 && SCSI=y
help
Support for the on-board SCSI controller on the Motorola MVME147
single-board computer.
@@ -1758,7 +1758,7 @@
config SUN3X_ESP
bool "Sun3x ESP SCSI"
- depends on SUN3X && SCSI
+ depends on SUN3X && SCSI=y
help
The ESP was an on-board SCSI controller used on Sun 3/80
machines. Say Y here to compile in support for it.
diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c
index c562369..e3b9692 100644
--- a/drivers/scsi/ahci.c
+++ b/drivers/scsi/ahci.c
@@ -1105,6 +1105,7 @@
MODULE_DESCRIPTION("AHCI SATA low-level driver");
MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(pci, ahci_pci_tbl);
+MODULE_VERSION(DRV_VERSION);
module_init(ahci_init);
module_exit(ahci_exit);
diff --git a/drivers/scsi/arm/Kconfig b/drivers/scsi/arm/Kconfig
index 54b3286..13f2304 100644
--- a/drivers/scsi/arm/Kconfig
+++ b/drivers/scsi/arm/Kconfig
@@ -3,7 +3,7 @@
#
config SCSI_ACORNSCSI_3
tristate "Acorn SCSI card (aka30) support"
- depends on ARCH_ACORN && SCSI
+ depends on ARCH_ACORN && SCSI && BROKEN
help
This enables support for the Acorn SCSI card (aka30). If you have an
Acorn system with one of these, say Y. If unsure, say N.
diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c
index a2cfade..d96ebf9 100644
--- a/drivers/scsi/ata_piix.c
+++ b/drivers/scsi/ata_piix.c
@@ -32,7 +32,7 @@
#include <linux/libata.h>
#define DRV_NAME "ata_piix"
-#define DRV_VERSION "1.03"
+#define DRV_VERSION "1.04"
enum {
PIIX_IOCFG = 0x54, /* IDE I/O configuration register */
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index 73b1f72..f4e7dcb 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -2268,19 +2268,6 @@
* spin_lock_irqsave(host_set lock)
*/
-
-
-/**
- * ata_sg_init_one - Prepare a one-entry scatter-gather list.
- * @qc: Queued command
- * @buf: transfer buffer
- * @buflen: length of buf
- *
- * Builds a single-entry scatter-gather list to initiate a
- * transfer utilizing the specified buffer.
- *
- * LOCKING:
- */
void ata_sg_init_one(struct ata_queued_cmd *qc, void *buf, unsigned int buflen)
{
struct scatterlist *sg;
@@ -2312,18 +2299,6 @@
* spin_lock_irqsave(host_set lock)
*/
-
-/**
- * ata_sg_init - Assign a scatter gather list to a queued command
- * @qc: Queued command
- * @sg: Scatter-gather list
- * @n_elem: length of sg list
- *
- * Attaches a scatter-gather list to a queued command.
- *
- * LOCKING:
- */
-
void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg,
unsigned int n_elem)
{
diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h
index d90430b..3e7f4843 100644
--- a/drivers/scsi/libata.h
+++ b/drivers/scsi/libata.h
@@ -26,7 +26,7 @@
#define __LIBATA_H__
#define DRV_NAME "libata"
-#define DRV_VERSION "1.11" /* must be exactly four chars */
+#define DRV_VERSION "1.12" /* must be exactly four chars */
struct ata_scsi_args {
u16 *id;
diff --git a/drivers/scsi/sata_promise.c b/drivers/scsi/sata_promise.c
index 5c1d441..919fb31 100644
--- a/drivers/scsi/sata_promise.c
+++ b/drivers/scsi/sata_promise.c
@@ -40,7 +40,7 @@
#include "sata_promise.h"
#define DRV_NAME "sata_promise"
-#define DRV_VERSION "1.01"
+#define DRV_VERSION "1.02"
enum {
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 56de409..b87122a 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -211,7 +211,7 @@
config SERIAL_AMBA_PL010
tristate "ARM AMBA PL010 serial port support"
- depends on ARM_AMBA
+ depends on ARM_AMBA && (BROKEN || !ARCH_VERSATILE)
select SERIAL_CORE
help
This selects the ARM(R) AMBA(R) PrimeCell PL010 UART. If you have
@@ -819,7 +819,7 @@
config SERIAL_M32R_PLDSIO
bool "M32R SIO I/F on a PLD"
- depends on SERIAL_M32R_SIO=y
+ depends on SERIAL_M32R_SIO=y && (PLAT_OPSPUT || PALT_USRV || PLAT_M32700UT)
default n
help
Say Y here if you want to use the M32R serial controller
diff --git a/drivers/serial/m32r_sio.c b/drivers/serial/m32r_sio.c
index 0301fea..9b50560 100644
--- a/drivers/serial/m32r_sio.c
+++ b/drivers/serial/m32r_sio.c
@@ -1123,7 +1123,7 @@
return uart_set_options(port, co, baud, parity, bits, flow);
}
-extern struct uart_driver m32r_sio_reg;
+static struct uart_driver m32r_sio_reg;
static struct console m32r_sio_console = {
.name = "ttyS",
.write = m32r_sio_console_write,
diff --git a/drivers/usb/net/usbnet.c b/drivers/usb/net/usbnet.c
index 576f3b8..4528a00 100644
--- a/drivers/usb/net/usbnet.c
+++ b/drivers/usb/net/usbnet.c
@@ -1922,7 +1922,7 @@
// copy the packet data to the new skb
memcpy(skb_put(gl_skb, size), packet->packet_data, size);
- skb_return (dev, skb);
+ skb_return (dev, gl_skb);
}
// advance to the next packet
diff --git a/drivers/video/console/Kconfig b/drivers/video/console/Kconfig
index cbff983..5fe182d 100644
--- a/drivers/video/console/Kconfig
+++ b/drivers/video/console/Kconfig
@@ -6,7 +6,7 @@
config VGA_CONSOLE
bool "VGA text console" if EMBEDDED || !X86
- depends on !ARCH_ACORN && !ARCH_EBSA110 && !4xx && !8xx && !SPARC32 && !SPARC64 && !M68K && !PARISC
+ depends on !ARCH_ACORN && !ARCH_EBSA110 && !4xx && !8xx && !SPARC32 && !SPARC64 && !M68K && !PARISC && !ARCH_VERSATILE
default y
help
Saying Y here will allow you to use Linux in text mode through a
diff --git a/include/asm-alpha/system.h b/include/asm-alpha/system.h
index c08ce97..bdb4d66 100644
--- a/include/asm-alpha/system.h
+++ b/include/asm-alpha/system.h
@@ -443,22 +443,19 @@
if something tries to do an invalid xchg(). */
extern void __xchg_called_with_bad_pointer(void);
-static inline unsigned long
-__xchg(volatile void *ptr, unsigned long x, int size)
-{
- switch (size) {
- case 1:
- return __xchg_u8(ptr, x);
- case 2:
- return __xchg_u16(ptr, x);
- case 4:
- return __xchg_u32(ptr, x);
- case 8:
- return __xchg_u64(ptr, x);
- }
- __xchg_called_with_bad_pointer();
- return x;
-}
+#define __xchg(ptr, x, size) \
+({ \
+ unsigned long __xchg__res; \
+ volatile void *__xchg__ptr = (ptr); \
+ switch (size) { \
+ case 1: __xchg__res = __xchg_u8(__xchg__ptr, x); break; \
+ case 2: __xchg__res = __xchg_u16(__xchg__ptr, x); break; \
+ case 4: __xchg__res = __xchg_u32(__xchg__ptr, x); break; \
+ case 8: __xchg__res = __xchg_u64(__xchg__ptr, x); break; \
+ default: __xchg_called_with_bad_pointer(); __xchg__res = x; \
+ } \
+ __xchg__res; \
+})
#define xchg(ptr,x) \
({ \
diff --git a/include/asm-arm/arch-ixp4xx/timex.h b/include/asm-arm/arch-ixp4xx/timex.h
index 38c9d77..3745e35 100644
--- a/include/asm-arm/arch-ixp4xx/timex.h
+++ b/include/asm-arm/arch-ixp4xx/timex.h
@@ -7,7 +7,9 @@
/*
* We use IXP425 General purpose timer for our timer needs, it runs at
- * 66.66... MHz
+ * 66.66... MHz. We do a convulted calculation of CLOCK_TICK_RATE b/c the
+ * timer register ignores the bottom 2 bits of the LATCH value.
*/
-#define CLOCK_TICK_RATE (66666666)
+#define FREQ 66666666
+#define CLOCK_TICK_RATE (((FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ)
diff --git a/include/asm-arm/bug.h b/include/asm-arm/bug.h
index 24d1167..7fb0213 100644
--- a/include/asm-arm/bug.h
+++ b/include/asm-arm/bug.h
@@ -5,7 +5,7 @@
#ifdef CONFIG_BUG
#ifdef CONFIG_DEBUG_BUGVERBOSE
-extern volatile void __bug(const char *file, int line, void *data);
+extern void __bug(const char *file, int line, void *data) __attribute__((noreturn));
/* give file/line information */
#define BUG() __bug(__FILE__, __LINE__, NULL)
diff --git a/include/asm-arm/cpu-multi32.h b/include/asm-arm/cpu-multi32.h
index ff48022..4679f63 100644
--- a/include/asm-arm/cpu-multi32.h
+++ b/include/asm-arm/cpu-multi32.h
@@ -31,7 +31,7 @@
/*
* Special stuff for a reset
*/
- volatile void (*reset)(unsigned long addr);
+ void (*reset)(unsigned long addr) __attribute__((noreturn));
/*
* Idle the processor
*/
diff --git a/include/asm-arm/cpu-single.h b/include/asm-arm/cpu-single.h
index b5ec5d5..6723e67 100644
--- a/include/asm-arm/cpu-single.h
+++ b/include/asm-arm/cpu-single.h
@@ -41,4 +41,4 @@
extern void cpu_dcache_clean_area(void *, int);
extern void cpu_do_switch_mm(unsigned long pgd_phys, struct mm_struct *mm);
extern void cpu_set_pte(pte_t *ptep, pte_t pte);
-extern volatile void cpu_reset(unsigned long addr);
+extern void cpu_reset(unsigned long addr) __attribute__((noreturn));
diff --git a/include/asm-m32r/smp.h b/include/asm-m32r/smp.h
index b9a20cd..7885b7d 100644
--- a/include/asm-m32r/smp.h
+++ b/include/asm-m32r/smp.h
@@ -61,9 +61,7 @@
* Some lowlevel functions might want to know about
* the real CPU ID <-> CPU # mapping.
*/
-extern volatile int physid_2_cpu[NR_CPUS];
extern volatile int cpu_2_physid[NR_CPUS];
-#define physid_to_cpu(physid) physid_2_cpu[physid]
#define cpu_to_physid(cpu_id) cpu_2_physid[cpu_id]
#define raw_smp_processor_id() (current_thread_info()->cpu)
diff --git a/include/asm-m68k/page.h b/include/asm-m68k/page.h
index 99a5167..206313e 100644
--- a/include/asm-m68k/page.h
+++ b/include/asm-m68k/page.h
@@ -138,13 +138,13 @@
#define __pa(vaddr) ((unsigned long)(vaddr)+m68k_memoffset)
#define __va(paddr) ((void *)((unsigned long)(paddr)-m68k_memoffset))
#else
-#define __pa(vaddr) virt_to_phys((void *)vaddr)
-#define __va(paddr) phys_to_virt((unsigned long)paddr)
+#define __pa(vaddr) virt_to_phys((void *)(vaddr))
+#define __va(paddr) phys_to_virt((unsigned long)(paddr))
#endif
#else /* !CONFIG_SUN3 */
/* This #define is a horrible hack to suppress lots of warnings. --m */
-#define __pa(x) ___pa((unsigned long)x)
+#define __pa(x) ___pa((unsigned long)(x))
static inline unsigned long ___pa(unsigned long x)
{
if(x == 0)
diff --git a/include/asm-ppc/time.h b/include/asm-ppc/time.h
index ce09b47..321fb75 100644
--- a/include/asm-ppc/time.h
+++ b/include/asm-ppc/time.h
@@ -58,7 +58,7 @@
/* Accessor functions for the timebase (RTC on 601) registers. */
/* If one day CONFIG_POWER is added just define __USE_RTC as 1 */
#ifdef CONFIG_6xx
-extern __inline__ int const __USE_RTC(void) {
+extern __inline__ int __attribute_pure__ __USE_RTC(void) {
return (mfspr(SPRN_PVR)>>16) == 1;
}
#else
diff --git a/include/asm-s390/uaccess.h b/include/asm-s390/uaccess.h
index a7f43a2..3e3bfe6 100644
--- a/include/asm-s390/uaccess.h
+++ b/include/asm-s390/uaccess.h
@@ -149,11 +149,11 @@
})
#endif
-#ifndef __CHECKER__
#define __put_user(x, ptr) \
({ \
__typeof__(*(ptr)) __x = (x); \
int __pu_err; \
+ __chk_user_ptr(ptr); \
switch (sizeof (*(ptr))) { \
case 1: \
case 2: \
@@ -167,14 +167,6 @@
} \
__pu_err; \
})
-#else
-#define __put_user(x, ptr) \
-({ \
- void __user *p; \
- p = (ptr); \
- 0; \
-})
-#endif
#define put_user(x, ptr) \
({ \
@@ -213,11 +205,11 @@
})
#endif
-#ifndef __CHECKER__
#define __get_user(x, ptr) \
({ \
__typeof__(*(ptr)) __x; \
int __gu_err; \
+ __chk_user_ptr(ptr); \
switch (sizeof(*(ptr))) { \
case 1: \
case 2: \
@@ -232,15 +224,6 @@
(x) = __x; \
__gu_err; \
})
-#else
-#define __get_user(x, ptr) \
-({ \
- void __user *p; \
- p = (ptr); \
- 0; \
-})
-#endif
-
#define get_user(x, ptr) \
({ \
diff --git a/include/sound/core.h b/include/sound/core.h
index 38b357f..f72b3ef 100644
--- a/include/sound/core.h
+++ b/include/sound/core.h
@@ -360,11 +360,13 @@
/* isadma.c */
+#ifdef CONFIG_ISA_DMA_API
#define DMA_MODE_NO_ENABLE 0x0100
void snd_dma_program(unsigned long dma, unsigned long addr, unsigned int size, unsigned short mode);
void snd_dma_disable(unsigned long dma);
unsigned int snd_dma_pointer(unsigned long dma, unsigned int size);
+#endif
/* misc.c */
diff --git a/kernel/cpuset.c b/kernel/cpuset.c
index 21a4e3b..d7f4d0c 100644
--- a/kernel/cpuset.c
+++ b/kernel/cpuset.c
@@ -636,6 +636,25 @@
return;
/*
+ * Hack to avoid 2.6.13 partial node dynamic sched domain bug.
+ * Require the 'cpu_exclusive' cpuset to include all (or none)
+ * of the CPUs on each node, or return w/o changing sched domains.
+ * Remove this hack when dynamic sched domains fixed.
+ */
+ {
+ int i, j;
+
+ for_each_cpu_mask(i, cur->cpus_allowed) {
+ cpumask_t mask = node_to_cpumask(cpu_to_node(i));
+
+ for_each_cpu_mask(j, mask) {
+ if (!cpu_isset(j, cur->cpus_allowed))
+ return;
+ }
+ }
+ }
+
+ /*
* Get all cpus from parent's cpus_allowed not part of exclusive
* children
*/
diff --git a/lib/vsprintf.c b/lib/vsprintf.c
index a9bda0a..e4e9031 100644
--- a/lib/vsprintf.c
+++ b/lib/vsprintf.c
@@ -269,6 +269,7 @@
int qualifier; /* 'h', 'l', or 'L' for integer fields */
/* 'z' support added 23/7/1999 S.H. */
/* 'z' changed to 'Z' --davidm 1/25/99 */
+ /* 't' added for ptrdiff_t */
/* Reject out-of-range values early */
if (unlikely((int) size < 0)) {
@@ -339,7 +340,7 @@
/* get the conversion qualifier */
qualifier = -1;
if (*fmt == 'h' || *fmt == 'l' || *fmt == 'L' ||
- *fmt =='Z' || *fmt == 'z') {
+ *fmt =='Z' || *fmt == 'z' || *fmt == 't') {
qualifier = *fmt;
++fmt;
if (qualifier == 'l' && *fmt == 'l') {
@@ -467,6 +468,8 @@
num = (signed long) num;
} else if (qualifier == 'Z' || qualifier == 'z') {
num = va_arg(args, size_t);
+ } else if (qualifier == 't') {
+ num = va_arg(args, ptrdiff_t);
} else if (qualifier == 'h') {
num = (unsigned short) va_arg(args, int);
if (flags & SIGN)
diff --git a/net/rose/rose_route.c b/net/rose/rose_route.c
index 46b2321..25da6f6 100644
--- a/net/rose/rose_route.c
+++ b/net/rose/rose_route.c
@@ -995,7 +995,7 @@
* 2. It isn't "owned" by any existing route.
*/
if (frametype != ROSE_CALL_REQUEST) { /* XXX */
- ret = 0;
+ res = 0;
goto out;
}
diff --git a/sound/Kconfig b/sound/Kconfig
index ee794ae..b65ee47 100644
--- a/sound/Kconfig
+++ b/sound/Kconfig
@@ -77,7 +77,7 @@
endmenu
menu "Open Sound System"
- depends on SOUND!=n && (BROKEN || (!SPARC32 && !SPARC64))
+ depends on SOUND!=n
config SOUND_PRIME
tristate "Open Sound System (DEPRECATED)"
diff --git a/sound/core/Makefile b/sound/core/Makefile
index 764ac18..969d755 100644
--- a/sound/core/Makefile
+++ b/sound/core/Makefile
@@ -5,7 +5,7 @@
snd-objs := sound.o init.o memory.o info.o control.o misc.o \
device.o wrappers.o
-ifeq ($(CONFIG_ISA),y)
+ifeq ($(CONFIG_ISA_DMA_API),y)
snd-objs += isadma.o
endif
ifeq ($(CONFIG_SND_OSSEMUL),y)
diff --git a/sound/core/sound.c b/sound/core/sound.c
index 7612884..3271e92 100644
--- a/sound/core/sound.c
+++ b/sound/core/sound.c
@@ -432,7 +432,7 @@
EXPORT_SYMBOL(snd_device_register);
EXPORT_SYMBOL(snd_device_free);
/* isadma.c */
-#ifdef CONFIG_ISA
+#ifdef CONFIG_ISA_DMA_API
EXPORT_SYMBOL(snd_dma_program);
EXPORT_SYMBOL(snd_dma_disable);
EXPORT_SYMBOL(snd_dma_pointer);
diff --git a/sound/isa/Kconfig b/sound/isa/Kconfig
index 148a856..be4ea60 100644
--- a/sound/isa/Kconfig
+++ b/sound/isa/Kconfig
@@ -1,7 +1,7 @@
# ALSA ISA drivers
menu "ISA devices"
- depends on SND!=n && ISA
+ depends on SND!=n && ISA && ISA_DMA_API
config SND_AD1848_LIB
tristate
diff --git a/sound/oss/Kconfig b/sound/oss/Kconfig
index 7bd95ce..953e5f3 100644
--- a/sound/oss/Kconfig
+++ b/sound/oss/Kconfig
@@ -6,7 +6,7 @@
# Prompt user for primary drivers.
config SOUND_BT878
tristate "BT878 audio dma"
- depends on SOUND_PRIME
+ depends on SOUND_PRIME && PCI
---help---
Audio DMA support for bt878 based grabber boards. As you might have
already noticed, bt878 is listed with two functions in /proc/pci.
@@ -80,14 +80,14 @@
config MIDI_EMU10K1
bool "Creative SBLive! MIDI (EXPERIMENTAL)"
- depends on SOUND_EMU10K1 && EXPERIMENTAL
+ depends on SOUND_EMU10K1 && EXPERIMENTAL && ISA_DMA_API
help
Say Y if you want to be able to use the OSS /dev/sequencer
interface. This code is still experimental.
config SOUND_FUSION
tristate "Crystal SoundFusion (CS4280/461x)"
- depends on SOUND_PRIME
+ depends on SOUND_PRIME && PCI
help
This module drives the Crystal SoundFusion devices (CS4280/46xx
series) when wired as native sound drivers with AC97 codecs. If
@@ -95,7 +95,7 @@
config SOUND_CS4281
tristate "Crystal Sound CS4281"
- depends on SOUND_PRIME
+ depends on SOUND_PRIME && PCI
help
Picture and feature list at
<http://www.pcbroker.com/crystal4281.html>.
@@ -179,7 +179,7 @@
config SOUND_SONICVIBES
tristate "S3 SonicVibes"
- depends on SOUND_PRIME
+ depends on SOUND_PRIME && PCI
help
Say Y or M if you have a PCI sound card utilizing the S3
SonicVibes chipset. To find out if your sound card uses a
@@ -226,7 +226,7 @@
config SOUND_TRIDENT
tristate "Trident 4DWave DX/NX, SiS 7018 or ALi 5451 PCI Audio Core"
- depends on SOUND_PRIME
+ depends on SOUND_PRIME && PCI
---help---
Say Y or M if you have a PCI sound card utilizing the Trident
4DWave-DX/NX chipset or your mother board chipset has SiS 7018
@@ -503,7 +503,7 @@
config MIDI_VIA82CXXX
bool "VIA 82C686 MIDI"
- depends on SOUND_VIA82CXXX
+ depends on SOUND_VIA82CXXX && ISA_DMA_API
help
Answer Y to use the MIDI interface of the Via686. You may need to
enable this in the BIOS before it will work. This is for connection
@@ -512,7 +512,7 @@
config SOUND_OSS
tristate "OSS sound modules"
- depends on SOUND_PRIME
+ depends on SOUND_PRIME && ISA_DMA_API
help
OSS is the Open Sound System suite of sound card drivers. They make
sound programming easier since they provide a common API. Say Y or
diff --git a/sound/oss/Makefile b/sound/oss/Makefile
index db9afb6..9bf3ee5 100644
--- a/sound/oss/Makefile
+++ b/sound/oss/Makefile
@@ -80,7 +80,7 @@
obj-$(CONFIG_SOUND_IT8172) += ite8172.o ac97_codec.o
obj-$(CONFIG_SOUND_FORTE) += forte.o ac97_codec.o
-obj-$(CONFIG_SOUND_AD1980) += ac97_plugin_ad1980.o
+obj-$(CONFIG_SOUND_AD1980) += ac97_plugin_ad1980.o ac97_codec.o
obj-$(CONFIG_SOUND_WM97XX) += ac97_plugin_wm97xx.o
ifeq ($(CONFIG_MIDI_EMU10K1),y)
diff --git a/sound/oss/i810_audio.c b/sound/oss/i810_audio.c
index 7e9f667..b9a640f 100644
--- a/sound/oss/i810_audio.c
+++ b/sound/oss/i810_audio.c
@@ -3430,9 +3430,9 @@
release_mem_region(card->iobase_mmio_phys, 256);
}
out_pio:
- release_region(card->iobase, 64);
-out_region2:
release_region(card->ac97base, 256);
+out_region2:
+ release_region(card->iobase, 64);
out_region1:
pci_free_consistent(pci_dev, sizeof(struct i810_channel)*NR_HW_CH,
card->channel, card->chandma);
diff --git a/sound/oss/vidc.h b/sound/oss/vidc.h
index bab7044..d5b8064 100644
--- a/sound/oss/vidc.h
+++ b/sound/oss/vidc.h
@@ -10,10 +10,6 @@
* VIDC sound function prototypes
*/
-/* vidc.c */
-
-extern int vidc_busy;
-
/* vidc_fill.S */
/*
diff --git a/sound/pci/Kconfig b/sound/pci/Kconfig
index 6d7a00f..26b42bb 100644
--- a/sound/pci/Kconfig
+++ b/sound/pci/Kconfig
@@ -314,7 +314,7 @@
config SND_ALS4000
tristate "Avance Logic ALS4000"
- depends on SND
+ depends on SND && ISA_DMA_API
select SND_OPL3_LIB
select SND_MPU401_UART
select SND_PCM