ALSA: asihpi - Reduce number of error codes returned to upper layers.
Create and use HPI_ERROR_DSP_COMMUNICATION _DSP_BOOTLOAD, rather than
backend-specific error codes (now returned as data with the error).
Signed-off-by: Eliot Blennerhassett <eblennerhassett@audioscience.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
diff --git a/sound/pci/asihpi/hpi.h b/sound/pci/asihpi/hpi.h
index efed0c1..212a016 100644
--- a/sound/pci/asihpi/hpi.h
+++ b/sound/pci/asihpi/hpi.h
@@ -43,8 +43,8 @@
#define HPI_VER_RELEASE(v) ((int)(v & 0xFF))
/* Use single digits for versions less that 10 to avoid octal. */
-#define HPI_VER HPI_VERSION_CONSTRUCTOR(4L, 5, 17)
-#define HPI_VER_STRING "4.05.17"
+#define HPI_VER HPI_VERSION_CONSTRUCTOR(4L, 5, 19)
+#define HPI_VER_STRING "4.05.19"
/* Library version as documented in hpi-api-versions.txt */
#define HPI_LIB_VER HPI_VERSION_CONSTRUCTOR(9, 0, 0)
@@ -433,11 +433,14 @@
/** Adapter mode commands
-Used in wQueryOrSet field of HPI_AdapterSetModeEx().
+Used in wQueryOrSet parameter of HPI_AdapterSetModeEx().
\ingroup adapter
*/
enum HPI_ADAPTER_MODE_CMDS {
+ /** Set the mode to the given parameter */
HPI_ADAPTER_MODE_SET = 0,
+ /** Return 0 or error depending whether mode is valid,
+ but don't set the mode */
HPI_ADAPTER_MODE_QUERY = 1
};
@@ -874,8 +877,7 @@
HPI_ERROR_OBJ_ALREADY_OPEN = 105,
/** PCI, ISA resource not valid. */
HPI_ERROR_INVALID_RESOURCE = 106,
- /* GetInfo call from SubSysFindAdapters failed. */
- /*HPI_ERROR_SUBSYSFINDADAPTERS_GETINFO= 107, */
+ /* HPI_ERROR_SUBSYSFINDADAPTERS_GETINFO= 107 */
/** Default response was never updated with actual error code. */
HPI_ERROR_INVALID_RESPONSE = 108,
/** wSize field of response was not updated,
@@ -905,8 +907,7 @@
*/
HPI_ERROR_MESSAGE_BUFFER_TOO_SMALL = 117,
- /* Too many adapters. */
- /* HPI_ERROR_TOO_MANY_ADAPTERS= 200, */
+ /* HPI_ERROR_TOO_MANY_ADAPTERS= 200 */
/** Bad adpater. */
HPI_ERROR_BAD_ADAPTER = 201,
/** Adapter number out of range or not set properly. */
@@ -915,15 +916,15 @@
HPI_DUPLICATE_ADAPTER_NUMBER = 203,
/** DSP code failed to bootload. (unused?) */
HPI_ERROR_DSP_BOOTLOAD = 204,
- /** Adapter failed DSP code self test. (unused?) */
- HPI_ERROR_DSP_SELFTEST = 205,
+ /** Communication with DSP failed */
+ HPI_ERROR_DSP_COMMUNICATION = 205,
/** Couldn't find or open the DSP code file. */
HPI_ERROR_DSP_FILE_NOT_FOUND = 206,
/** Internal DSP hardware error. */
HPI_ERROR_DSP_HARDWARE = 207,
/** Could not allocate memory */
HPI_ERROR_MEMORY_ALLOC = 208,
- /** Failed to correctly load/config PLD. (unused?) */
+ /** Failed to correctly load/config PLD. (unused) */
HPI_ERROR_PLD_LOAD = 209,
/** Unexpected end of file, block length too big etc. */
HPI_ERROR_DSP_FILE_FORMAT = 210,
@@ -932,8 +933,7 @@
HPI_ERROR_DSP_FILE_ACCESS_DENIED = 211,
/** First DSP code section header not found in DSP file. */
HPI_ERROR_DSP_FILE_NO_HEADER = 212,
- /* File read operation on DSP code file failed. */
- /*HPI_ERROR_DSP_FILE_READ_ERROR= 213, */
+ /* HPI_ERROR_DSP_FILE_READ_ERROR= 213, */
/** DSP code for adapter family not found. */
HPI_ERROR_DSP_SECTION_NOT_FOUND = 214,
/** Other OS specific error opening DSP file. */
@@ -943,8 +943,7 @@
/** DSP code section header had size == 0. */
HPI_ERROR_DSP_FILE_NULL_HEADER = 217,
- /* Base number for flash errors. */
- /* HPI_ERROR_FLASH = 220, */
+ /* HPI_ERROR_FLASH = 220, */
/** Flash has bad checksum */
HPI_ERROR_BAD_CHECKSUM = 221,
@@ -958,8 +957,8 @@
/** Reserved for OEMs. */
HPI_ERROR_RESERVED_1 = 290,
- /* Stream does not exist. */
- /*HPI_ERROR_INVALID_STREAM= 300, // use HPI_ERROR_INVALID_OBJ_INDEX */
+ /* HPI_ERROR_INVALID_STREAM = 300,
+ use HPI_ERROR_INVALID_OBJ_INDEX */
/** Invalid compression format. */
HPI_ERROR_INVALID_FORMAT = 301,
/** Invalid format samplerate */
@@ -970,10 +969,12 @@
HPI_ERROR_INVALID_BITRATE = 304,
/** Invalid datasize used for stream read/write. */
HPI_ERROR_INVALID_DATASIZE = 305,
- /* Stream buffer is full during stream write. */
- /*HPI_ERROR_BUFFER_FULL = 306, // USE HPI_ERROR_INVALID_DATASIZE */
- /* Stream buffer is empty during stream read. */
- /*HPI_ERROR_BUFFER_EMPTY = 307, // USE HPI_ERROR_INVALID_DATASIZE */
+ /* Stream buffer is full during stream write.
+ HPI_ERROR_BUFFER_FULL = 306,
+ Stream buffer is empty during stream read.
+ HPI_ERROR_BUFFER_EMPTY = 307,
+ Use HPI_ERROR_INVALID_DATASIZE
+ */
/** Null data pointer used for stream read/write. */
HPI_ERROR_INVALID_DATA_POINTER = 308,
/** Packet ordering error for stream read/write. */
@@ -1010,6 +1011,7 @@
HPI_ERROR_CONTROL_DISABLED = 404,
/** I2C transaction failed due to a missing ACK. */
HPI_ERROR_CONTROL_I2C_MISSING_ACK = 405,
+ HPI_ERROR_I2C_MISSING_ACK = 405,
/** Control is busy, or coming out of
reset and cannot be accessed at this time. */
HPI_ERROR_CONTROL_NOT_READY = 407,
@@ -1020,7 +1022,6 @@
HPI_ERROR_NVMEM_FAIL = 452,
/** I2C */
- HPI_ERROR_I2C_MISSING_ACK = 405, /*HPI_ERROR_CONTROL_I2C_MISSING_ACK */
HPI_ERROR_I2C_BAD_ADR = 460,
/** Entity errors */
diff --git a/sound/pci/asihpi/hpi6000.c b/sound/pci/asihpi/hpi6000.c
index 4346583..9a05672 100644
--- a/sound/pci/asihpi/hpi6000.c
+++ b/sound/pci/asihpi/hpi6000.c
@@ -237,10 +237,19 @@
switch (phm->function) {
case HPI_CONTROL_GET_STATE:
if (pao->has_control_cache) {
- phr->error = hpi6000_update_control_cache(pao, phm);
+ u16 err;
+ err = hpi6000_update_control_cache(pao, phm);
- if (phr->error)
+ if (err) {
+ if (err >= HPI_ERROR_BACKEND_BASE) {
+ phr->error =
+ HPI_ERROR_CONTROL_CACHING;
+ phr->specific_error = err;
+ } else {
+ phr->error = err;
+ }
break;
+ }
if (hpi_check_control_cache(((struct hpi_hw_obj *)
pao->priv)->p_cache, phm,
@@ -405,7 +414,7 @@
struct hpi_adapter_obj ao;
struct hpi_adapter_obj *pao;
u32 os_error_code;
- short error = 0;
+ u16 err = 0;
u32 dsp_index = 0;
HPI_DEBUG_LOG(VERBOSE, "subsys_create_adapter\n");
@@ -422,10 +431,16 @@
/* create the adapter object based on the resource information */
ao.pci = *phm->u.s.resource.r.pci;
- error = create_adapter_obj(&ao, &os_error_code);
- if (error) {
+ err = create_adapter_obj(&ao, &os_error_code);
+ if (err) {
delete_adapter_obj(&ao);
- phr->error = error;
+ if (err >= HPI_ERROR_BACKEND_BASE) {
+ phr->error = HPI_ERROR_DSP_BOOTLOAD;
+ phr->specific_error = err;
+ } else {
+ phr->error = err;
+ }
+
phr->u.s.data = os_error_code;
return;
}
@@ -434,7 +449,7 @@
if (!pao) {
/* We just added this adapter, why can't we find it!? */
HPI_DEBUG_LOG(ERROR, "lost adapter after boot\n");
- phr->error = 950;
+ phr->error = HPI_ERROR_BAD_ADAPTER;
return;
}
@@ -1763,17 +1778,11 @@
hpios_dsplock_lock(pao);
error = hpi6000_message_response_sequence(pao, dsp_index, phm, phr);
- /* maybe an error response */
- if (error) {
- /* something failed in the HPI/DSP interface */
- phr->error = error;
- /* just the header of the response is valid */
- phr->size = sizeof(struct hpi_response_header);
+ if (error) /* something failed in the HPI/DSP interface */
goto err;
- }
- if (phr->error != 0) /* something failed in the DSP */
- goto err;
+ if (phr->error) /* something failed in the DSP */
+ goto out;
switch (phm->function) {
case HPI_OSTREAM_WRITE:
@@ -1796,10 +1805,19 @@
}
}
- if (error)
- phr->error = error;
-
err:
+ if (error) {
+ if (error >= HPI_ERROR_BACKEND_BASE) {
+ phr->error = HPI_ERROR_DSP_COMMUNICATION;
+ phr->specific_error = error;
+ } else {
+ phr->error = error;
+ }
+
+ /* just the header of the response is valid */
+ phr->size = sizeof(struct hpi_response_header);
+ }
+out:
hpios_dsplock_unlock(pao);
return;
}
diff --git a/sound/pci/asihpi/hpi6205.c b/sound/pci/asihpi/hpi6205.c
index a3f650d..5fe535b 100644
--- a/sound/pci/asihpi/hpi6205.c
+++ b/sound/pci/asihpi/hpi6205.c
@@ -478,7 +478,12 @@
err = create_adapter_obj(&ao, &os_error_code);
if (err) {
delete_adapter_obj(&ao);
- phr->error = err;
+ if (err >= HPI_ERROR_BACKEND_BASE) {
+ phr->error = HPI_ERROR_DSP_BOOTLOAD;
+ phr->specific_error = err;
+ } else {
+ phr->error = err;
+ }
phr->u.s.data = os_error_code;
return;
}
@@ -2242,7 +2247,13 @@
/* maybe an error response */
if (err) {
/* something failed in the HPI/DSP interface */
- phr->error = err;
+ if (err >= HPI_ERROR_BACKEND_BASE) {
+ phr->error = HPI_ERROR_DSP_COMMUNICATION;
+ phr->specific_error = err;
+ } else {
+ phr->error = err;
+ }
+
pao->dsp_crashed++;
/* just the header of the response is valid */