Merge tag 'disintegrate-main-20121013' of git://git.infradead.org/users/dhowells/linux-headers
Pull UAPI disintegration for include/linux/{,byteorder/}*.h from David Howells:
"The patches contained herein do the following:
(1) Remove kernel-only stuff in linux/ppp-comp.h from the UAPI. I checked
this with Paul Mackerras before I created the patch and he suggested some
extra bits to unexport.
(2) Remove linux/blk_types.h entirely from the UAPI as none of it is userspace
applicable, and remove from the UAPI that part of linux/fs.h that was the
reason for linux/blk_types.h being exported in the first place. I
discussed this with Jens Axboe before creating the patch.
(3) The big patch of the series to disintegrate include/linux/*.h as a unit.
This could be split up, though there would be collisions in moving stuff
between the two Kbuild files when the parts are merged as that file is
sorted alphabetically rather than being grouped by subsystem.
Of this set of headers, 17 files have changed in the UAPI exported region
since the 4th and only 8 since the 9th so there isn't much change in this
area - as one might expect.
It should be pretty obvious and straightforward if it does come to fixing
up: stuff in __KERNEL__ guards stays where it is and stuff outside moves
to the same file in the include/uapi/linux/ directory.
If a new file appears then things get a bit more complicated as the
"headers +=" line has to move to include/uapi/linux/Kbuild. Only one new
file has appeared since the 9th and I judge this type of event relatively
unlikely.
(4) A patch to disintegrate include/linux/byteorder/*.h as a unit.
Signed-off-by: David Howells <dhowells@redhat.com>"
* tag 'disintegrate-main-20121013' of git://git.infradead.org/users/dhowells/linux-headers:
UAPI: (Scripted) Disintegrate include/linux/byteorder
UAPI: (Scripted) Disintegrate include/linux
UAPI: Unexport linux/blk_types.h
UAPI: Unexport part of linux/ppp-comp.h
diff --git a/include/linux/Kbuild b/include/linux/Kbuild
index d114db9..5b57367 100644
--- a/include/linux/Kbuild
+++ b/include/linux/Kbuild
@@ -22,390 +22,10 @@
ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/a.out.h \
$(srctree)/arch/$(SRCARCH)/include/uapi/asm/a.out.h),)
-header-y += a.out.h
endif
ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/kvm.h \
$(srctree)/arch/$(SRCARCH)/include/uapi/asm/kvm.h),)
-header-y += kvm.h
endif
ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/kvm_para.h \
$(srctree)/arch/$(SRCARCH)/include/uapi/asm/kvm_para.h),)
-header-y += kvm_para.h
endif
-
-header-y += acct.h
-header-y += adb.h
-header-y += adfs_fs.h
-header-y += affs_hardblocks.h
-header-y += agpgart.h
-header-y += aio_abi.h
-header-y += apm_bios.h
-header-y += arcfb.h
-header-y += atalk.h
-header-y += atm.h
-header-y += atm_eni.h
-header-y += atm_he.h
-header-y += atm_idt77105.h
-header-y += atm_nicstar.h
-header-y += atm_tcp.h
-header-y += atm_zatm.h
-header-y += atmapi.h
-header-y += atmarp.h
-header-y += atmbr2684.h
-header-y += atmclip.h
-header-y += atmdev.h
-header-y += atmioc.h
-header-y += atmlec.h
-header-y += atmmpc.h
-header-y += atmppp.h
-header-y += atmsap.h
-header-y += atmsvc.h
-header-y += audit.h
-header-y += auto_fs.h
-header-y += auto_fs4.h
-header-y += auxvec.h
-header-y += ax25.h
-header-y += b1lli.h
-header-y += baycom.h
-header-y += bfs_fs.h
-header-y += binfmts.h
-header-y += blk_types.h
-header-y += blkpg.h
-header-y += blktrace_api.h
-header-y += bpqether.h
-header-y += bsg.h
-header-y += can.h
-header-y += capability.h
-header-y += capi.h
-header-y += cciss_defs.h
-header-y += cciss_ioctl.h
-header-y += cdrom.h
-header-y += cgroupstats.h
-header-y += chio.h
-header-y += cm4000_cs.h
-header-y += cn_proc.h
-header-y += coda.h
-header-y += coda_psdev.h
-header-y += coff.h
-header-y += connector.h
-header-y += const.h
-header-y += cramfs_fs.h
-header-y += cuda.h
-header-y += cyclades.h
-header-y += cycx_cfm.h
-header-y += dcbnl.h
-header-y += dccp.h
-header-y += dlm.h
-header-y += dlm_device.h
-header-y += dlm_netlink.h
-header-y += dlm_plock.h
-header-y += dlmconstants.h
-header-y += dm-ioctl.h
-header-y += dm-log-userspace.h
-header-y += dn.h
-header-y += dqblk_xfs.h
-header-y += edd.h
-header-y += efs_fs_sb.h
-header-y += elf-em.h
-header-y += elf-fdpic.h
-header-y += elf.h
-header-y += elfcore.h
-header-y += errno.h
-header-y += errqueue.h
-header-y += ethtool.h
-header-y += eventpoll.h
-header-y += fadvise.h
-header-y += falloc.h
-header-y += fanotify.h
-header-y += fb.h
-header-y += fcntl.h
-header-y += fd.h
-header-y += fdreg.h
-header-y += fib_rules.h
-header-y += fiemap.h
-header-y += filter.h
-header-y += firewire-cdev.h
-header-y += firewire-constants.h
-header-y += flat.h
-header-y += fs.h
-header-y += fsl_hypervisor.h
-header-y += fuse.h
-header-y += futex.h
-header-y += gameport.h
-header-y += gen_stats.h
-header-y += genetlink.h
-header-y += gfs2_ondisk.h
-header-y += gigaset_dev.h
-header-y += hdlc.h
-header-y += hdlcdrv.h
-header-y += hdreg.h
-header-y += hid.h
-header-y += hiddev.h
-header-y += hidraw.h
-header-y += hpet.h
-header-y += hysdn_if.h
-header-y += i2c-dev.h
-header-y += i2c.h
-header-y += i2o-dev.h
-header-y += i8k.h
-header-y += icmp.h
-header-y += icmpv6.h
-header-y += if.h
-header-y += if_addr.h
-header-y += if_addrlabel.h
-header-y += if_alg.h
-header-y += if_arcnet.h
-header-y += if_arp.h
-header-y += if_bonding.h
-header-y += if_bridge.h
-header-y += if_cablemodem.h
-header-y += if_eql.h
-header-y += if_ether.h
-header-y += if_fc.h
-header-y += if_fddi.h
-header-y += if_frad.h
-header-y += if_hippi.h
-header-y += if_infiniband.h
-header-y += if_link.h
-header-y += if_ltalk.h
-header-y += if_packet.h
-header-y += if_phonet.h
-header-y += if_plip.h
-header-y += if_ppp.h
-header-y += if_pppol2tp.h
-header-y += if_pppox.h
-header-y += if_slip.h
-header-y += if_team.h
-header-y += if_tun.h
-header-y += if_tunnel.h
-header-y += if_vlan.h
-header-y += if_x25.h
-header-y += igmp.h
-header-y += in.h
-header-y += in6.h
-header-y += in_route.h
-header-y += sock_diag.h
-header-y += inet_diag.h
-header-y += unix_diag.h
-header-y += packet_diag.h
-header-y += inotify.h
-header-y += input.h
-header-y += ioctl.h
-header-y += ip.h
-header-y += ip6_tunnel.h
-header-y += ip_vs.h
-header-y += ipc.h
-header-y += ipmi.h
-header-y += ipmi_msgdefs.h
-header-y += ipsec.h
-header-y += ipv6.h
-header-y += ipv6_route.h
-header-y += ipx.h
-header-y += irda.h
-header-y += irqnr.h
-header-y += isdn.h
-header-y += isdn_divertif.h
-header-y += isdn_ppp.h
-header-y += isdnif.h
-header-y += iso_fs.h
-header-y += ivtv.h
-header-y += ivtvfb.h
-header-y += ixjuser.h
-header-y += jffs2.h
-header-y += joystick.h
-header-y += kd.h
-header-y += kdev_t.h
-header-y += kernel.h
-header-y += kernelcapi.h
-header-y += kernel-page-flags.h
-header-y += kexec.h
-header-y += keyboard.h
-header-y += keyctl.h
-header-y += l2tp.h
-header-y += limits.h
-header-y += llc.h
-header-y += loop.h
-header-y += lp.h
-header-y += magic.h
-header-y += major.h
-header-y += map_to_7segment.h
-header-y += matroxfb.h
-header-y += mdio.h
-header-y += media.h
-header-y += mei.h
-header-y += mempolicy.h
-header-y += meye.h
-header-y += mii.h
-header-y += minix_fs.h
-header-y += mman.h
-header-y += mmtimer.h
-header-y += mqueue.h
-header-y += mroute.h
-header-y += mroute6.h
-header-y += msdos_fs.h
-header-y += msg.h
-header-y += mtio.h
-header-y += n_r3964.h
-header-y += nbd.h
-header-y += ncp.h
-header-y += ncp_fs.h
-header-y += ncp_mount.h
-header-y += ncp_no.h
-header-y += neighbour.h
-header-y += net.h
-header-y += net_dropmon.h
-header-y += net_tstamp.h
-header-y += netdevice.h
-header-y += netfilter.h
-header-y += netfilter_arp.h
-header-y += netfilter_bridge.h
-header-y += netfilter_decnet.h
-header-y += netfilter_ipv4.h
-header-y += netfilter_ipv6.h
-header-y += netlink.h
-header-y += netrom.h
-header-y += nfc.h
-header-y += nfs.h
-header-y += nfs2.h
-header-y += nfs3.h
-header-y += nfs4.h
-header-y += nfs4_mount.h
-header-y += nfs_fs.h
-header-y += nfs_idmap.h
-header-y += nfs_mount.h
-header-y += nfsacl.h
-header-y += nl80211.h
-header-y += nubus.h
-header-y += nvram.h
-header-y += omap3isp.h
-header-y += omapfb.h
-header-y += oom.h
-header-y += param.h
-header-y += parport.h
-header-y += patchkey.h
-header-y += pci.h
-header-y += pci_regs.h
-header-y += perf_event.h
-header-y += personality.h
-header-y += pfkeyv2.h
-header-y += pg.h
-header-y += phantom.h
-header-y += phonet.h
-header-y += pkt_cls.h
-header-y += pkt_sched.h
-header-y += pktcdvd.h
-header-y += pmu.h
-header-y += poll.h
-header-y += posix_types.h
-header-y += ppdev.h
-header-y += ppp-comp.h
-header-y += ppp-ioctl.h
-header-y += ppp_defs.h
-header-y += pps.h
-header-y += prctl.h
-header-y += ptp_clock.h
-header-y += ptrace.h
-header-y += qnx4_fs.h
-header-y += qnxtypes.h
-header-y += quota.h
-header-y += radeonfb.h
-header-y += random.h
-header-y += raw.h
-header-y += rds.h
-header-y += reboot.h
-header-y += reiserfs_fs.h
-header-y += reiserfs_xattr.h
-header-y += resource.h
-header-y += rfkill.h
-header-y += romfs_fs.h
-header-y += rose.h
-header-y += route.h
-header-y += rtc.h
-header-y += rtnetlink.h
-header-y += scc.h
-header-y += sched.h
-header-y += screen_info.h
-header-y += sdla.h
-header-y += seccomp.h
-header-y += securebits.h
-header-y += selinux_netlink.h
-header-y += sem.h
-header-y += serial.h
-header-y += serial_core.h
-header-y += serial_reg.h
-header-y += serio.h
-header-y += shm.h
-header-y += signal.h
-header-y += signalfd.h
-header-y += snmp.h
-header-y += socket.h
-header-y += sockios.h
-header-y += som.h
-header-y += sonet.h
-header-y += sonypi.h
-header-y += sound.h
-header-y += soundcard.h
-header-y += stat.h
-header-y += stddef.h
-header-y += string.h
-header-y += suspend_ioctls.h
-header-y += swab.h
-header-y += synclink.h
-header-y += sysctl.h
-header-y += sysinfo.h
-header-y += taskstats.h
-header-y += tcp.h
-header-y += tcp_metrics.h
-header-y += telephony.h
-header-y += termios.h
-header-y += time.h
-header-y += times.h
-header-y += timex.h
-header-y += tiocl.h
-header-y += tipc.h
-header-y += tipc_config.h
-header-y += toshiba.h
-header-y += tty.h
-header-y += tty_flags.h
-header-y += types.h
-header-y += udf_fs_i.h
-header-y += udp.h
-header-y += uhid.h
-header-y += uinput.h
-header-y += uio.h
-header-y += ultrasound.h
-header-y += un.h
-header-y += unistd.h
-header-y += usbdevice_fs.h
-header-y += utime.h
-header-y += utsname.h
-header-y += uuid.h
-header-y += uvcvideo.h
-header-y += v4l2-common.h
-header-y += v4l2-controls.h
-header-y += v4l2-dv-timings.h
-header-y += v4l2-mediabus.h
-header-y += v4l2-subdev.h
-header-y += veth.h
-header-y += vfio.h
-header-y += vhost.h
-header-y += videodev2.h
-header-y += virtio_9p.h
-header-y += virtio_balloon.h
-header-y += virtio_blk.h
-header-y += virtio_config.h
-header-y += virtio_console.h
-header-y += virtio_ids.h
-header-y += virtio_net.h
-header-y += virtio_pci.h
-header-y += virtio_ring.h
-header-y += virtio_rng.h
-header-y += vt.h
-header-y += wait.h
-header-y += wanrouter.h
-header-y += watchdog.h
-header-y += wimax.h
-header-y += wireless.h
-header-y += x25.h
-header-y += xattr.h
-header-y += xfrm.h
diff --git a/include/linux/a.out.h b/include/linux/a.out.h
index e86dfca..220f143 100644
--- a/include/linux/a.out.h
+++ b/include/linux/a.out.h
@@ -1,278 +1,84 @@
#ifndef __A_OUT_GNU_H__
#define __A_OUT_GNU_H__
-#define __GNU_EXEC_MACROS__
-
-#ifndef __STRUCT_EXEC_OVERRIDE__
-
-#include <asm/a.out.h>
-
-#endif /* __STRUCT_EXEC_OVERRIDE__ */
+#include <uapi/linux/a.out.h>
#ifndef __ASSEMBLY__
-
-/* these go in the N_MACHTYPE field */
-enum machine_type {
#if defined (M_OLDSUN2)
- M__OLDSUN2 = M_OLDSUN2,
#else
- M_OLDSUN2 = 0,
#endif
#if defined (M_68010)
- M__68010 = M_68010,
#else
- M_68010 = 1,
#endif
#if defined (M_68020)
- M__68020 = M_68020,
#else
- M_68020 = 2,
#endif
#if defined (M_SPARC)
- M__SPARC = M_SPARC,
#else
- M_SPARC = 3,
#endif
- /* skip a bunch so we don't run into any of sun's numbers */
- M_386 = 100,
- M_MIPS1 = 151, /* MIPS R3000/R3000 binary */
- M_MIPS2 = 152 /* MIPS R6000/R4000 binary */
-};
-
#if !defined (N_MAGIC)
-#define N_MAGIC(exec) ((exec).a_info & 0xffff)
#endif
-#define N_MACHTYPE(exec) ((enum machine_type)(((exec).a_info >> 16) & 0xff))
-#define N_FLAGS(exec) (((exec).a_info >> 24) & 0xff)
-#define N_SET_INFO(exec, magic, type, flags) \
- ((exec).a_info = ((magic) & 0xffff) \
- | (((int)(type) & 0xff) << 16) \
- | (((flags) & 0xff) << 24))
-#define N_SET_MAGIC(exec, magic) \
- ((exec).a_info = (((exec).a_info & 0xffff0000) | ((magic) & 0xffff)))
-
-#define N_SET_MACHTYPE(exec, machtype) \
- ((exec).a_info = \
- ((exec).a_info&0xff00ffff) | ((((int)(machtype))&0xff) << 16))
-
-#define N_SET_FLAGS(exec, flags) \
- ((exec).a_info = \
- ((exec).a_info&0x00ffffff) | (((flags) & 0xff) << 24))
-
-/* Code indicating object file or impure executable. */
-#define OMAGIC 0407
-/* Code indicating pure executable. */
-#define NMAGIC 0410
-/* Code indicating demand-paged executable. */
-#define ZMAGIC 0413
-/* This indicates a demand-paged executable with the header in the text.
- The first page is unmapped to help trap NULL pointer references */
-#define QMAGIC 0314
-
-/* Code indicating core file. */
-#define CMAGIC 0421
-
#if !defined (N_BADMAG)
-#define N_BADMAG(x) (N_MAGIC(x) != OMAGIC \
- && N_MAGIC(x) != NMAGIC \
- && N_MAGIC(x) != ZMAGIC \
- && N_MAGIC(x) != QMAGIC)
#endif
-
-#define _N_HDROFF(x) (1024 - sizeof (struct exec))
-
#if !defined (N_TXTOFF)
-#define N_TXTOFF(x) \
- (N_MAGIC(x) == ZMAGIC ? _N_HDROFF((x)) + sizeof (struct exec) : \
- (N_MAGIC(x) == QMAGIC ? 0 : sizeof (struct exec)))
#endif
-
#if !defined (N_DATOFF)
-#define N_DATOFF(x) (N_TXTOFF(x) + (x).a_text)
#endif
-
#if !defined (N_TRELOFF)
-#define N_TRELOFF(x) (N_DATOFF(x) + (x).a_data)
#endif
-
#if !defined (N_DRELOFF)
-#define N_DRELOFF(x) (N_TRELOFF(x) + N_TRSIZE(x))
#endif
-
#if !defined (N_SYMOFF)
-#define N_SYMOFF(x) (N_DRELOFF(x) + N_DRSIZE(x))
#endif
-
#if !defined (N_STROFF)
-#define N_STROFF(x) (N_SYMOFF(x) + N_SYMSIZE(x))
#endif
-
-/* Address of text segment in memory after it is loaded. */
#if !defined (N_TXTADDR)
-#define N_TXTADDR(x) (N_MAGIC(x) == QMAGIC ? PAGE_SIZE : 0)
#endif
-
-/* Address of data segment in memory after it is loaded.
- Note that it is up to you to define SEGMENT_SIZE
- on machines not listed here. */
#if defined(vax) || defined(hp300) || defined(pyr)
-#define SEGMENT_SIZE page_size
#endif
#ifdef sony
-#define SEGMENT_SIZE 0x2000
#endif /* Sony. */
#ifdef is68k
-#define SEGMENT_SIZE 0x20000
#endif
#if defined(m68k) && defined(PORTAR)
-#define PAGE_SIZE 0x400
-#define SEGMENT_SIZE PAGE_SIZE
#endif
-
#ifdef linux
-#ifdef __KERNEL__
#include <asm/page.h>
-#else
-#include <unistd.h>
-#endif
#if defined(__i386__) || defined(__mc68000__)
-#define SEGMENT_SIZE 1024
#else
#ifndef SEGMENT_SIZE
-#ifdef __KERNEL__
#define SEGMENT_SIZE PAGE_SIZE
-#else
-#define SEGMENT_SIZE getpagesize()
#endif
#endif
#endif
-#endif
-
-#define _N_SEGMENT_ROUND(x) ALIGN(x, SEGMENT_SIZE)
-
-#define _N_TXTENDADDR(x) (N_TXTADDR(x)+(x).a_text)
-
#ifndef N_DATADDR
-#define N_DATADDR(x) \
- (N_MAGIC(x)==OMAGIC? (_N_TXTENDADDR(x)) \
- : (_N_SEGMENT_ROUND (_N_TXTENDADDR(x))))
#endif
-
-/* Address of bss segment in memory after it is loaded. */
#if !defined (N_BSSADDR)
-#define N_BSSADDR(x) (N_DATADDR(x) + (x).a_data)
#endif
-
#if !defined (N_NLIST_DECLARED)
-struct nlist {
- union {
- char *n_name;
- struct nlist *n_next;
- long n_strx;
- } n_un;
- unsigned char n_type;
- char n_other;
- short n_desc;
- unsigned long n_value;
-};
#endif /* no N_NLIST_DECLARED. */
-
#if !defined (N_UNDF)
-#define N_UNDF 0
#endif
#if !defined (N_ABS)
-#define N_ABS 2
#endif
#if !defined (N_TEXT)
-#define N_TEXT 4
#endif
#if !defined (N_DATA)
-#define N_DATA 6
#endif
#if !defined (N_BSS)
-#define N_BSS 8
#endif
#if !defined (N_FN)
-#define N_FN 15
#endif
-
#if !defined (N_EXT)
-#define N_EXT 1
#endif
#if !defined (N_TYPE)
-#define N_TYPE 036
#endif
#if !defined (N_STAB)
-#define N_STAB 0340
#endif
-
-/* The following type indicates the definition of a symbol as being
- an indirect reference to another symbol. The other symbol
- appears as an undefined reference, immediately following this symbol.
-
- Indirection is asymmetrical. The other symbol's value will be used
- to satisfy requests for the indirect symbol, but not vice versa.
- If the other symbol does not have a definition, libraries will
- be searched to find a definition. */
-#define N_INDR 0xa
-
-/* The following symbols refer to set elements.
- All the N_SET[ATDB] symbols with the same name form one set.
- Space is allocated for the set in the text section, and each set
- element's value is stored into one word of the space.
- The first word of the space is the length of the set (number of elements).
-
- The address of the set is made into an N_SETV symbol
- whose name is the same as the name of the set.
- This symbol acts like a N_DATA global symbol
- in that it can satisfy undefined external references. */
-
-/* These appear as input to LD, in a .o file. */
-#define N_SETA 0x14 /* Absolute set element symbol */
-#define N_SETT 0x16 /* Text set element symbol */
-#define N_SETD 0x18 /* Data set element symbol */
-#define N_SETB 0x1A /* Bss set element symbol */
-
-/* This is output from LD. */
-#define N_SETV 0x1C /* Pointer to set vector in data area. */
-
#if !defined (N_RELOCATION_INFO_DECLARED)
-/* This structure describes a single relocation to be performed.
- The text-relocation section of the file is a vector of these structures,
- all of which apply to the text section.
- Likewise, the data-relocation section applies to the data section. */
-
-struct relocation_info
-{
- /* Address (within segment) to be relocated. */
- int r_address;
- /* The meaning of r_symbolnum depends on r_extern. */
- unsigned int r_symbolnum:24;
- /* Nonzero means value is a pc-relative offset
- and it should be relocated for changes in its own address
- as well as for changes in the symbol or section specified. */
- unsigned int r_pcrel:1;
- /* Length (as exponent of 2) of the field to be relocated.
- Thus, a value of 2 indicates 1<<2 bytes. */
- unsigned int r_length:2;
- /* 1 => relocate with value of symbol.
- r_symbolnum is the index of the symbol
- in file's the symbol table.
- 0 => relocate with the address of a segment.
- r_symbolnum is N_TEXT, N_DATA, N_BSS or N_ABS
- (the N_EXT bit may be set also, but signifies nothing). */
- unsigned int r_extern:1;
- /* Four bits that aren't used, but when writing an object file
- it is desirable to clear them. */
#ifdef NS32K
- unsigned r_bsr:1;
- unsigned r_disp:1;
- unsigned r_pad:2;
#else
- unsigned int r_pad:4;
#endif
-};
#endif /* no N_RELOCATION_INFO_DECLARED. */
-
#endif /*__ASSEMBLY__ */
#endif /* __A_OUT_GNU_H__ */
diff --git a/include/linux/acct.h b/include/linux/acct.h
index d537aa0..4a5b7cb 100644
--- a/include/linux/acct.h
+++ b/include/linux/acct.h
@@ -11,109 +11,11 @@
* Copyright (C) 1995 - 1997 Marco van Wieringen - ELM Consultancy B.V.
*
*/
-
#ifndef _LINUX_ACCT_H
#define _LINUX_ACCT_H
-#include <linux/types.h>
+#include <uapi/linux/acct.h>
-#include <asm/param.h>
-#include <asm/byteorder.h>
-
-/*
- * comp_t is a 16-bit "floating" point number with a 3-bit base 8
- * exponent and a 13-bit fraction.
- * comp2_t is 24-bit with 5-bit base 2 exponent and 20 bit fraction
- * (leading 1 not stored).
- * See linux/kernel/acct.c for the specific encoding systems used.
- */
-
-typedef __u16 comp_t;
-typedef __u32 comp2_t;
-
-/*
- * accounting file record
- *
- * This structure contains all of the information written out to the
- * process accounting file whenever a process exits.
- */
-
-#define ACCT_COMM 16
-
-struct acct
-{
- char ac_flag; /* Flags */
- char ac_version; /* Always set to ACCT_VERSION */
- /* for binary compatibility back until 2.0 */
- __u16 ac_uid16; /* LSB of Real User ID */
- __u16 ac_gid16; /* LSB of Real Group ID */
- __u16 ac_tty; /* Control Terminal */
- __u32 ac_btime; /* Process Creation Time */
- comp_t ac_utime; /* User Time */
- comp_t ac_stime; /* System Time */
- comp_t ac_etime; /* Elapsed Time */
- comp_t ac_mem; /* Average Memory Usage */
- comp_t ac_io; /* Chars Transferred */
- comp_t ac_rw; /* Blocks Read or Written */
- comp_t ac_minflt; /* Minor Pagefaults */
- comp_t ac_majflt; /* Major Pagefaults */
- comp_t ac_swaps; /* Number of Swaps */
-/* m68k had no padding here. */
-#if !defined(CONFIG_M68K) || !defined(__KERNEL__)
- __u16 ac_ahz; /* AHZ */
-#endif
- __u32 ac_exitcode; /* Exitcode */
- char ac_comm[ACCT_COMM + 1]; /* Command Name */
- __u8 ac_etime_hi; /* Elapsed Time MSB */
- __u16 ac_etime_lo; /* Elapsed Time LSB */
- __u32 ac_uid; /* Real User ID */
- __u32 ac_gid; /* Real Group ID */
-};
-
-struct acct_v3
-{
- char ac_flag; /* Flags */
- char ac_version; /* Always set to ACCT_VERSION */
- __u16 ac_tty; /* Control Terminal */
- __u32 ac_exitcode; /* Exitcode */
- __u32 ac_uid; /* Real User ID */
- __u32 ac_gid; /* Real Group ID */
- __u32 ac_pid; /* Process ID */
- __u32 ac_ppid; /* Parent Process ID */
- __u32 ac_btime; /* Process Creation Time */
-#ifdef __KERNEL__
- __u32 ac_etime; /* Elapsed Time */
-#else
- float ac_etime; /* Elapsed Time */
-#endif
- comp_t ac_utime; /* User Time */
- comp_t ac_stime; /* System Time */
- comp_t ac_mem; /* Average Memory Usage */
- comp_t ac_io; /* Chars Transferred */
- comp_t ac_rw; /* Blocks Read or Written */
- comp_t ac_minflt; /* Minor Pagefaults */
- comp_t ac_majflt; /* Major Pagefaults */
- comp_t ac_swaps; /* Number of Swaps */
- char ac_comm[ACCT_COMM]; /* Command Name */
-};
-
-/*
- * accounting flags
- */
- /* bit set when the process ... */
-#define AFORK 0x01 /* ... executed fork, but did not exec */
-#define ASU 0x02 /* ... used super-user privileges */
-#define ACOMPAT 0x04 /* ... used compatibility mode (VAX only not used) */
-#define ACORE 0x08 /* ... dumped core */
-#define AXSIG 0x10 /* ... was killed by a signal */
-
-#ifdef __BIG_ENDIAN
-#define ACCT_BYTEORDER 0x80 /* accounting file is big endian */
-#else
-#define ACCT_BYTEORDER 0x00 /* accounting file is little endian */
-#endif
-
-#ifdef __KERNEL__
#ifdef CONFIG_BSD_PROCESS_ACCT
@@ -163,12 +65,6 @@
typedef struct acct acct_t;
#endif
-#else
-#define ACCT_VERSION 2
-#define AHZ (HZ)
-#endif /* __KERNEL */
-
-#ifdef __KERNEL__
#include <linux/jiffies.h>
/*
* Yet another set of HZ to *HZ helper functions.
@@ -210,6 +106,4 @@
return x;
}
-#endif /* __KERNEL */
-
#endif /* _LINUX_ACCT_H */
diff --git a/include/linux/adb.h b/include/linux/adb.h
index 63bca50..cde4130 100644
--- a/include/linux/adb.h
+++ b/include/linux/adb.h
@@ -4,43 +4,8 @@
#ifndef __ADB_H
#define __ADB_H
-/* ADB commands */
-#define ADB_BUSRESET 0
-#define ADB_FLUSH(id) (0x01 | ((id) << 4))
-#define ADB_WRITEREG(id, reg) (0x08 | (reg) | ((id) << 4))
-#define ADB_READREG(id, reg) (0x0C | (reg) | ((id) << 4))
+#include <uapi/linux/adb.h>
-/* ADB default device IDs (upper 4 bits of ADB command byte) */
-#define ADB_DONGLE 1 /* "software execution control" devices */
-#define ADB_KEYBOARD 2
-#define ADB_MOUSE 3
-#define ADB_TABLET 4
-#define ADB_MODEM 5
-#define ADB_MISC 7 /* maybe a monitor */
-
-#define ADB_RET_OK 0
-#define ADB_RET_TIMEOUT 3
-
-/* The kind of ADB request. The controller may emulate some
- or all of those CUDA/PMU packet kinds */
-#define ADB_PACKET 0
-#define CUDA_PACKET 1
-#define ERROR_PACKET 2
-#define TIMER_PACKET 3
-#define POWER_PACKET 4
-#define MACIIC_PACKET 5
-#define PMU_PACKET 6
-#define ADB_QUERY 7
-
-/* ADB queries */
-
-/* ADB_QUERY_GETDEVINFO
- * Query ADB slot for device presence
- * data[2] = id, rep[0] = orig addr, rep[1] = handler_id
- */
-#define ADB_QUERY_GETDEVINFO 1
-
-#ifdef __KERNEL__
struct adb_request {
unsigned char data[32];
@@ -98,6 +63,4 @@
int adb_try_handler_change(int address, int new_id);
int adb_get_infos(int address, int *original_address, int *handler_id);
-#endif /* __KERNEL__ */
-
#endif /* __ADB_H */
diff --git a/include/linux/adfs_fs.h b/include/linux/adfs_fs.h
index b19801f..0d99107 100644
--- a/include/linux/adfs_fs.h
+++ b/include/linux/adfs_fs.h
@@ -1,47 +1,9 @@
#ifndef _ADFS_FS_H
#define _ADFS_FS_H
-#include <linux/types.h>
-#include <linux/magic.h>
+#include <uapi/linux/adfs_fs.h>
/*
- * Disc Record at disc address 0xc00
- */
-struct adfs_discrecord {
- __u8 log2secsize;
- __u8 secspertrack;
- __u8 heads;
- __u8 density;
- __u8 idlen;
- __u8 log2bpmb;
- __u8 skew;
- __u8 bootoption;
- __u8 lowsector;
- __u8 nzones;
- __le16 zone_spare;
- __le32 root;
- __le32 disc_size;
- __le16 disc_id;
- __u8 disc_name[10];
- __le32 disc_type;
- __le32 disc_size_high;
- __u8 log2sharesize:4;
- __u8 unused40:4;
- __u8 big_flag:1;
- __u8 unused41:1;
- __u8 nzones_high;
- __le32 format_version;
- __le32 root_size;
- __u8 unused52[60 - 52];
-};
-
-#define ADFS_DISCRECORD (0xc00)
-#define ADFS_DR_OFFSET (0x1c0)
-#define ADFS_DR_SIZE 60
-#define ADFS_DR_SIZE_BITS (ADFS_DR_SIZE << 3)
-
-#ifdef __KERNEL__
-/*
* Calculate the boot block checksum on an ADFS drive. Note that this will
* appear to be correct if the sector contains all zeros, so also check that
* the disk size is non-zero!!!
@@ -59,5 +21,3 @@
return (result & 0xff) != ptr[511];
}
#endif
-
-#endif
diff --git a/include/linux/agpgart.h b/include/linux/agpgart.h
index f6778ec..c6b61ca 100644
--- a/include/linux/agpgart.h
+++ b/include/linux/agpgart.h
@@ -23,94 +23,12 @@
* OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*
*/
-
#ifndef _AGP_H
#define _AGP_H 1
-#define AGPIOC_BASE 'A'
-#define AGPIOC_INFO _IOR (AGPIOC_BASE, 0, struct agp_info*)
-#define AGPIOC_ACQUIRE _IO (AGPIOC_BASE, 1)
-#define AGPIOC_RELEASE _IO (AGPIOC_BASE, 2)
-#define AGPIOC_SETUP _IOW (AGPIOC_BASE, 3, struct agp_setup*)
-#define AGPIOC_RESERVE _IOW (AGPIOC_BASE, 4, struct agp_region*)
-#define AGPIOC_PROTECT _IOW (AGPIOC_BASE, 5, struct agp_region*)
-#define AGPIOC_ALLOCATE _IOWR(AGPIOC_BASE, 6, struct agp_allocate*)
-#define AGPIOC_DEALLOCATE _IOW (AGPIOC_BASE, 7, int)
-#define AGPIOC_BIND _IOW (AGPIOC_BASE, 8, struct agp_bind*)
-#define AGPIOC_UNBIND _IOW (AGPIOC_BASE, 9, struct agp_unbind*)
-#define AGPIOC_CHIPSET_FLUSH _IO (AGPIOC_BASE, 10)
-
-#define AGP_DEVICE "/dev/agpgart"
-
-#ifndef TRUE
-#define TRUE 1
-#endif
-
-#ifndef FALSE
-#define FALSE 0
-#endif
-
-#ifndef __KERNEL__
-#include <linux/types.h>
-
-struct agp_version {
- __u16 major;
- __u16 minor;
-};
-
-typedef struct _agp_info {
- struct agp_version version; /* version of the driver */
- __u32 bridge_id; /* bridge vendor/device */
- __u32 agp_mode; /* mode info of bridge */
- unsigned long aper_base;/* base of aperture */
- size_t aper_size; /* size of aperture */
- size_t pg_total; /* max pages (swap + system) */
- size_t pg_system; /* max pages (system) */
- size_t pg_used; /* current pages used */
-} agp_info;
-
-typedef struct _agp_setup {
- __u32 agp_mode; /* mode info of bridge */
-} agp_setup;
-
-/*
- * The "prot" down below needs still a "sleep" flag somehow ...
- */
-typedef struct _agp_segment {
- __kernel_off_t pg_start; /* starting page to populate */
- __kernel_size_t pg_count; /* number of pages */
- int prot; /* prot flags for mmap */
-} agp_segment;
-
-typedef struct _agp_region {
- __kernel_pid_t pid; /* pid of process */
- __kernel_size_t seg_count; /* number of segments */
- struct _agp_segment *seg_list;
-} agp_region;
-
-typedef struct _agp_allocate {
- int key; /* tag of allocation */
- __kernel_size_t pg_count;/* number of pages */
- __u32 type; /* 0 == normal, other devspec */
- __u32 physical; /* device specific (some devices
- * need a phys address of the
- * actual page behind the gatt
- * table) */
-} agp_allocate;
-
-typedef struct _agp_bind {
- int key; /* tag of allocation */
- __kernel_off_t pg_start;/* starting page to populate */
-} agp_bind;
-
-typedef struct _agp_unbind {
- int key; /* tag of allocation */
- __u32 priority; /* priority for paging out */
-} agp_unbind;
-
-#else /* __KERNEL__ */
#include <linux/mutex.h>
#include <linux/agp_backend.h>
+#include <uapi/linux/agpgart.h>
#define AGPGART_MINOR 175
@@ -209,6 +127,4 @@
bool backend_acquired;
};
-#endif /* __KERNEL__ */
-
#endif /* _AGP_H */
diff --git a/include/linux/apm_bios.h b/include/linux/apm_bios.h
index 01a6244..9c3a871 100644
--- a/include/linux/apm_bios.h
+++ b/include/linux/apm_bios.h
@@ -1,6 +1,3 @@
-#ifndef _LINUX_APM_H
-#define _LINUX_APM_H
-
/*
* Include file for the interface to an APM BIOS
* Copyright 1994-2001 Stephen Rothwell (sfr@canb.auug.org.au)
@@ -15,25 +12,11 @@
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*/
+#ifndef _LINUX_APM_H
+#define _LINUX_APM_H
-#include <linux/types.h>
+#include <uapi/linux/apm_bios.h>
-typedef unsigned short apm_event_t;
-typedef unsigned short apm_eventinfo_t;
-
-struct apm_bios_info {
- __u16 version;
- __u16 cseg;
- __u32 offset;
- __u16 cseg_16;
- __u16 dseg;
- __u16 flags;
- __u16 cseg_len;
- __u16 cseg_16_len;
- __u16 dseg_len;
-};
-
-#ifdef __KERNEL__
#define APM_CS (GDT_ENTRY_APMBIOS_BASE * 8)
#define APM_CS_16 (APM_CS + 8)
@@ -110,111 +93,9 @@
*/
extern struct apm_info apm_info;
-#endif /* __KERNEL__ */
-
-/*
- * Power states
- */
-#define APM_STATE_READY 0x0000
-#define APM_STATE_STANDBY 0x0001
-#define APM_STATE_SUSPEND 0x0002
-#define APM_STATE_OFF 0x0003
-#define APM_STATE_BUSY 0x0004
-#define APM_STATE_REJECT 0x0005
-#define APM_STATE_OEM_SYS 0x0020
-#define APM_STATE_OEM_DEV 0x0040
-
-#define APM_STATE_DISABLE 0x0000
-#define APM_STATE_ENABLE 0x0001
-
-#define APM_STATE_DISENGAGE 0x0000
-#define APM_STATE_ENGAGE 0x0001
-
-/*
- * Events (results of Get PM Event)
- */
-#define APM_SYS_STANDBY 0x0001
-#define APM_SYS_SUSPEND 0x0002
-#define APM_NORMAL_RESUME 0x0003
-#define APM_CRITICAL_RESUME 0x0004
-#define APM_LOW_BATTERY 0x0005
-#define APM_POWER_STATUS_CHANGE 0x0006
-#define APM_UPDATE_TIME 0x0007
-#define APM_CRITICAL_SUSPEND 0x0008
-#define APM_USER_STANDBY 0x0009
-#define APM_USER_SUSPEND 0x000a
-#define APM_STANDBY_RESUME 0x000b
-#define APM_CAPABILITY_CHANGE 0x000c
-
-/*
- * Error codes
- */
-#define APM_SUCCESS 0x00
-#define APM_DISABLED 0x01
-#define APM_CONNECTED 0x02
-#define APM_NOT_CONNECTED 0x03
-#define APM_16_CONNECTED 0x05
-#define APM_16_UNSUPPORTED 0x06
-#define APM_32_CONNECTED 0x07
-#define APM_32_UNSUPPORTED 0x08
-#define APM_BAD_DEVICE 0x09
-#define APM_BAD_PARAM 0x0a
-#define APM_NOT_ENGAGED 0x0b
-#define APM_BAD_FUNCTION 0x0c
-#define APM_RESUME_DISABLED 0x0d
-#define APM_NO_ERROR 0x53
-#define APM_BAD_STATE 0x60
-#define APM_NO_EVENTS 0x80
-#define APM_NOT_PRESENT 0x86
-
-/*
- * APM Device IDs
- */
-#define APM_DEVICE_BIOS 0x0000
-#define APM_DEVICE_ALL 0x0001
-#define APM_DEVICE_DISPLAY 0x0100
-#define APM_DEVICE_STORAGE 0x0200
-#define APM_DEVICE_PARALLEL 0x0300
-#define APM_DEVICE_SERIAL 0x0400
-#define APM_DEVICE_NETWORK 0x0500
-#define APM_DEVICE_PCMCIA 0x0600
-#define APM_DEVICE_BATTERY 0x8000
-#define APM_DEVICE_OEM 0xe000
-#define APM_DEVICE_OLD_ALL 0xffff
-#define APM_DEVICE_CLASS 0x00ff
-#define APM_DEVICE_MASK 0xff00
-
-#ifdef __KERNEL__
/*
* This is the "All Devices" ID communicated to the BIOS
*/
#define APM_DEVICE_BALL ((apm_info.connection_version > 0x0100) ? \
APM_DEVICE_ALL : APM_DEVICE_OLD_ALL)
-#endif
-
-/*
- * Battery status
- */
-#define APM_MAX_BATTERIES 2
-
-/*
- * APM defined capability bit flags
- */
-#define APM_CAP_GLOBAL_STANDBY 0x0001
-#define APM_CAP_GLOBAL_SUSPEND 0x0002
-#define APM_CAP_RESUME_STANDBY_TIMER 0x0004 /* Timer resume from standby */
-#define APM_CAP_RESUME_SUSPEND_TIMER 0x0008 /* Timer resume from suspend */
-#define APM_CAP_RESUME_STANDBY_RING 0x0010 /* Resume on Ring fr standby */
-#define APM_CAP_RESUME_SUSPEND_RING 0x0020 /* Resume on Ring fr suspend */
-#define APM_CAP_RESUME_STANDBY_PCMCIA 0x0040 /* Resume on PCMCIA Ring */
-#define APM_CAP_RESUME_SUSPEND_PCMCIA 0x0080 /* Resume on PCMCIA Ring */
-
-/*
- * ioctl operations
- */
-#include <linux/ioctl.h>
-
-#define APM_IOC_STANDBY _IO('A', 1)
-#define APM_IOC_SUSPEND _IO('A', 2)
-
#endif /* LINUX_APM_H */
diff --git a/include/linux/atalk.h b/include/linux/atalk.h
index f57c368..73fd8b7 100644
--- a/include/linux/atalk.h
+++ b/include/linux/atalk.h
@@ -1,49 +1,9 @@
#ifndef __LINUX_ATALK_H__
#define __LINUX_ATALK_H__
-#include <linux/types.h>
-#include <asm/byteorder.h>
-#include <linux/socket.h>
-
-/*
- * AppleTalk networking structures
- *
- * The following are directly referenced from the University Of Michigan
- * netatalk for compatibility reasons.
- */
-#define ATPORT_FIRST 1
-#define ATPORT_RESERVED 128
-#define ATPORT_LAST 254 /* 254 is only legal on localtalk */
-#define ATADDR_ANYNET (__u16)0
-#define ATADDR_ANYNODE (__u8)0
-#define ATADDR_ANYPORT (__u8)0
-#define ATADDR_BCAST (__u8)255
-#define DDP_MAXSZ 587
-#define DDP_MAXHOPS 15 /* 4 bits of hop counter */
-
-#define SIOCATALKDIFADDR (SIOCPROTOPRIVATE + 0)
-
-struct atalk_addr {
- __be16 s_net;
- __u8 s_node;
-};
-
-struct sockaddr_at {
- __kernel_sa_family_t sat_family;
- __u8 sat_port;
- struct atalk_addr sat_addr;
- char sat_zero[8];
-};
-
-struct atalk_netrange {
- __u8 nr_phase;
- __be16 nr_firstnet;
- __be16 nr_lastnet;
-};
-
-#ifdef __KERNEL__
#include <net/sock.h>
+#include <uapi/linux/atalk.h>
struct atalk_route {
struct net_device *dev;
@@ -205,5 +165,4 @@
#define atalk_proc_exit() do { } while(0)
#endif /* CONFIG_PROC_FS */
-#endif /* __KERNEL__ */
#endif /* __LINUX_ATALK_H__ */
diff --git a/include/linux/atm.h b/include/linux/atm.h
index d3b2921..30006c4 100644
--- a/include/linux/atm.h
+++ b/include/linux/atm.h
@@ -1,242 +1,9 @@
/* atm.h - general ATM declarations */
-
-/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */
-
-
-/*
- * WARNING: User-space programs should not #include <linux/atm.h> directly.
- * Instead, #include <atm.h>
- */
-
#ifndef _LINUX_ATM_H
#define _LINUX_ATM_H
-/*
- * BEGIN_xx and END_xx markers are used for automatic generation of
- * documentation. Do not change them.
- */
+#include <uapi/linux/atm.h>
-#include <linux/compiler.h>
-#include <linux/atmapi.h>
-#include <linux/atmsap.h>
-#include <linux/atmioc.h>
-#include <linux/types.h>
-
-
-/* general ATM constants */
-#define ATM_CELL_SIZE 53 /* ATM cell size incl. header */
-#define ATM_CELL_PAYLOAD 48 /* ATM payload size */
-#define ATM_AAL0_SDU 52 /* AAL0 SDU size */
-#define ATM_MAX_AAL34_PDU 65535 /* maximum AAL3/4 PDU payload */
-#define ATM_AAL5_TRAILER 8 /* AAL5 trailer size */
-#define ATM_MAX_AAL5_PDU 65535 /* maximum AAL5 PDU payload */
-#define ATM_MAX_CDV 9999 /* maximum (default) CDV */
-#define ATM_NOT_RSV_VCI 32 /* first non-reserved VCI value */
-
-#define ATM_MAX_VPI 255 /* maximum VPI at the UNI */
-#define ATM_MAX_VPI_NNI 4096 /* maximum VPI at the NNI */
-#define ATM_MAX_VCI 65535 /* maximum VCI */
-
-
-/* "protcol" values for the socket system call */
-#define ATM_NO_AAL 0 /* AAL not specified */
-#define ATM_AAL0 13 /* "raw" ATM cells */
-#define ATM_AAL1 1 /* AAL1 (CBR) */
-#define ATM_AAL2 2 /* AAL2 (VBR) */
-#define ATM_AAL34 3 /* AAL3/4 (data) */
-#define ATM_AAL5 5 /* AAL5 (data) */
-
-/*
- * socket option name coding functions
- *
- * Note that __SO_ENCODE and __SO_LEVEL are somewhat a hack since the
- * << 22 only reserves 9 bits for the level. On some architectures
- * SOL_SOCKET is 0xFFFF, so that's a bit of a problem
- */
-
-#define __SO_ENCODE(l,n,t) ((((l) & 0x1FF) << 22) | ((n) << 16) | \
- sizeof(t))
-#define __SO_LEVEL_MATCH(c,m) (((c) >> 22) == ((m) & 0x1FF))
-#define __SO_NUMBER(c) (((c) >> 16) & 0x3f)
-#define __SO_SIZE(c) ((c) & 0x3fff)
-
-/*
- * ATM layer
- */
-
-#define SO_SETCLP __SO_ENCODE(SOL_ATM,0,int)
- /* set CLP bit value - TODO */
-#define SO_CIRANGE __SO_ENCODE(SOL_ATM,1,struct atm_cirange)
- /* connection identifier range; socket must be
- bound or connected */
-#define SO_ATMQOS __SO_ENCODE(SOL_ATM,2,struct atm_qos)
- /* Quality of Service setting */
-#define SO_ATMSAP __SO_ENCODE(SOL_ATM,3,struct atm_sap)
- /* Service Access Point */
-#define SO_ATMPVC __SO_ENCODE(SOL_ATM,4,struct sockaddr_atmpvc)
- /* "PVC" address (also for SVCs); get only */
-#define SO_MULTIPOINT __SO_ENCODE(SOL_ATM, 5, int)
- /* make this vc a p2mp */
-
-
-/*
- * Note @@@: since the socket layers don't really distinguish the control and
- * the data plane but generally seems to be data plane-centric, any layer is
- * about equally wrong for the SAP. If you have a better idea about this,
- * please speak up ...
- */
-
-
-/* ATM cell header (for AAL0) */
-
-/* BEGIN_CH */
-#define ATM_HDR_GFC_MASK 0xf0000000
-#define ATM_HDR_GFC_SHIFT 28
-#define ATM_HDR_VPI_MASK 0x0ff00000
-#define ATM_HDR_VPI_SHIFT 20
-#define ATM_HDR_VCI_MASK 0x000ffff0
-#define ATM_HDR_VCI_SHIFT 4
-#define ATM_HDR_PTI_MASK 0x0000000e
-#define ATM_HDR_PTI_SHIFT 1
-#define ATM_HDR_CLP 0x00000001
-/* END_CH */
-
-
-/* PTI codings */
-
-/* BEGIN_PTI */
-#define ATM_PTI_US0 0 /* user data cell, congestion not exp, SDU-type 0 */
-#define ATM_PTI_US1 1 /* user data cell, congestion not exp, SDU-type 1 */
-#define ATM_PTI_UCES0 2 /* user data cell, cong. experienced, SDU-type 0 */
-#define ATM_PTI_UCES1 3 /* user data cell, cong. experienced, SDU-type 1 */
-#define ATM_PTI_SEGF5 4 /* segment OAM F5 flow related cell */
-#define ATM_PTI_E2EF5 5 /* end-to-end OAM F5 flow related cell */
-#define ATM_PTI_RSV_RM 6 /* reserved for traffic control/resource mgmt */
-#define ATM_PTI_RSV 7 /* reserved */
-/* END_PTI */
-
-
-/*
- * The following items should stay in linux/atm.h, which should be linked to
- * netatm/atm.h
- */
-
-/* Traffic description */
-
-#define ATM_NONE 0 /* no traffic */
-#define ATM_UBR 1
-#define ATM_CBR 2
-#define ATM_VBR 3
-#define ATM_ABR 4
-#define ATM_ANYCLASS 5 /* compatible with everything */
-
-#define ATM_MAX_PCR -1 /* maximum available PCR */
-
-struct atm_trafprm {
- unsigned char traffic_class; /* traffic class (ATM_UBR, ...) */
- int max_pcr; /* maximum PCR in cells per second */
- int pcr; /* desired PCR in cells per second */
- int min_pcr; /* minimum PCR in cells per second */
- int max_cdv; /* maximum CDV in microseconds */
- int max_sdu; /* maximum SDU in bytes */
- /* extra params for ABR */
- unsigned int icr; /* Initial Cell Rate (24-bit) */
- unsigned int tbe; /* Transient Buffer Exposure (24-bit) */
- unsigned int frtt : 24; /* Fixed Round Trip Time (24-bit) */
- unsigned int rif : 4; /* Rate Increment Factor (4-bit) */
- unsigned int rdf : 4; /* Rate Decrease Factor (4-bit) */
- unsigned int nrm_pres :1; /* nrm present bit */
- unsigned int trm_pres :1; /* rm present bit */
- unsigned int adtf_pres :1; /* adtf present bit */
- unsigned int cdf_pres :1; /* cdf present bit*/
- unsigned int nrm :3; /* Max # of Cells for each forward RM cell (3-bit) */
- unsigned int trm :3; /* Time between forward RM cells (3-bit) */
- unsigned int adtf :10; /* ACR Decrease Time Factor (10-bit) */
- unsigned int cdf :3; /* Cutoff Decrease Factor (3-bit) */
- unsigned int spare :9; /* spare bits */
-};
-
-struct atm_qos {
- struct atm_trafprm txtp; /* parameters in TX direction */
- struct atm_trafprm rxtp __ATM_API_ALIGN;
- /* parameters in RX direction */
- unsigned char aal __ATM_API_ALIGN;
-};
-
-/* PVC addressing */
-
-#define ATM_ITF_ANY -1 /* "magic" PVC address values */
-#define ATM_VPI_ANY -1
-#define ATM_VCI_ANY -1
-#define ATM_VPI_UNSPEC -2
-#define ATM_VCI_UNSPEC -2
-
-
-struct sockaddr_atmpvc {
- unsigned short sap_family; /* address family, AF_ATMPVC */
- struct { /* PVC address */
- short itf; /* ATM interface */
- short vpi; /* VPI (only 8 bits at UNI) */
- int vci; /* VCI (only 16 bits at UNI) */
- } sap_addr __ATM_API_ALIGN; /* PVC address */
-};
-
-/* SVC addressing */
-
-#define ATM_ESA_LEN 20 /* ATM End System Address length */
-#define ATM_E164_LEN 12 /* maximum E.164 number length */
-
-#define ATM_AFI_DCC 0x39 /* DCC ATM Format */
-#define ATM_AFI_ICD 0x47 /* ICD ATM Format */
-#define ATM_AFI_E164 0x45 /* E.164 ATM Format */
-#define ATM_AFI_LOCAL 0x49 /* Local ATM Format */
-
-#define ATM_AFI_DCC_GROUP 0xBD /* DCC ATM Group Format */
-#define ATM_AFI_ICD_GROUP 0xC5 /* ICD ATM Group Format */
-#define ATM_AFI_E164_GROUP 0xC3 /* E.164 ATM Group Format */
-#define ATM_AFI_LOCAL_GROUP 0xC7 /* Local ATM Group Format */
-
-#define ATM_LIJ_NONE 0 /* no leaf-initiated join */
-#define ATM_LIJ 1 /* request joining */
-#define ATM_LIJ_RPJ 2 /* set to root-prompted join */
-#define ATM_LIJ_NJ 3 /* set to network join */
-
-
-struct sockaddr_atmsvc {
- unsigned short sas_family; /* address family, AF_ATMSVC */
- struct { /* SVC address */
- unsigned char prv[ATM_ESA_LEN];/* private ATM address */
- char pub[ATM_E164_LEN+1]; /* public address (E.164) */
- /* unused addresses must be bzero'ed */
- char lij_type; /* role in LIJ call; one of ATM_LIJ* */
- __u32 lij_id; /* LIJ call identifier */
- } sas_addr __ATM_API_ALIGN; /* SVC address */
-};
-
-
-static __inline__ int atmsvc_addr_in_use(struct sockaddr_atmsvc addr)
-{
- return *addr.sas_addr.prv || *addr.sas_addr.pub;
-}
-
-
-static __inline__ int atmpvc_addr_in_use(struct sockaddr_atmpvc addr)
-{
- return addr.sap_addr.itf || addr.sap_addr.vpi || addr.sap_addr.vci;
-}
-
-
-/*
- * Some stuff for linux/sockios.h
- */
-
-struct atmif_sioc {
- int number;
- int length;
- void __user *arg;
-};
-
-#ifdef __KERNEL__
#ifdef CONFIG_COMPAT
#include <linux/compat.h>
struct compat_atmif_sioc {
@@ -246,6 +13,3 @@
};
#endif
#endif
-
-typedef unsigned short atm_backend_t;
-#endif
diff --git a/include/linux/atm_tcp.h b/include/linux/atm_tcp.h
index 375638f..db6b65f 100644
--- a/include/linux/atm_tcp.h
+++ b/include/linux/atm_tcp.h
@@ -3,62 +3,12 @@
/* Written 1997-2000 by Werner Almesberger, EPFL LRC/ICA */
-
#ifndef LINUX_ATM_TCP_H
#define LINUX_ATM_TCP_H
-#include <linux/atmapi.h>
-#include <linux/atm.h>
-#include <linux/atmioc.h>
-#include <linux/types.h>
+#include <uapi/linux/atm_tcp.h>
-/*
- * All values in struct atmtcp_hdr are in network byte order
- */
-
-struct atmtcp_hdr {
- __u16 vpi;
- __u16 vci;
- __u32 length; /* ... of data part */
-};
-
-/*
- * All values in struct atmtcp_command are in host byte order
- */
-
-#define ATMTCP_HDR_MAGIC (~0) /* this length indicates a command */
-#define ATMTCP_CTRL_OPEN 1 /* request/reply */
-#define ATMTCP_CTRL_CLOSE 2 /* request/reply */
-
-struct atmtcp_control {
- struct atmtcp_hdr hdr; /* must be first */
- int type; /* message type; both directions */
- atm_kptr_t vcc; /* both directions */
- struct sockaddr_atmpvc addr; /* suggested value from kernel */
- struct atm_qos qos; /* both directions */
- int result; /* to kernel only */
-} __ATM_API_ALIGN;
-
-/*
- * Field usage:
- * Messge type dir. hdr.v?i type addr qos vcc result
- * ----------- ---- ------- ---- ---- --- --- ------
- * OPEN K->D Y Y Y Y Y 0
- * OPEN D->K - Y Y Y Y Y
- * CLOSE K->D - - Y - Y 0
- * CLOSE D->K - - - - Y Y
- */
-
-#define SIOCSIFATMTCP _IO('a',ATMIOC_ITF) /* set ATMTCP mode */
-#define ATMTCP_CREATE _IO('a',ATMIOC_ITF+14) /* create persistent ATMTCP
- interface */
-#define ATMTCP_REMOVE _IO('a',ATMIOC_ITF+15) /* destroy persistent ATMTCP
- interface */
-
-
-#ifdef __KERNEL__
-
struct atm_tcp_ops {
int (*attach)(struct atm_vcc *vcc,int itf);
int (*create_persistent)(int itf);
@@ -69,5 +19,3 @@
extern struct atm_tcp_ops atm_tcp_ops;
#endif
-
-#endif
diff --git a/include/linux/atmdev.h b/include/linux/atmdev.h
index 06fd4bb..22ef21c 100644
--- a/include/linux/atmdev.h
+++ b/include/linux/atmdev.h
@@ -1,218 +1,8 @@
/* atmdev.h - ATM device driver declarations and various related items */
-
-/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */
-
-
#ifndef LINUX_ATMDEV_H
#define LINUX_ATMDEV_H
-#include <linux/atmapi.h>
-#include <linux/atm.h>
-#include <linux/atmioc.h>
-
-
-#define ESI_LEN 6
-
-#define ATM_OC3_PCR (155520000/270*260/8/53)
- /* OC3 link rate: 155520000 bps
- SONET overhead: /270*260 (9 section, 1 path)
- bits per cell: /8/53
- max cell rate: 353207.547 cells/sec */
-#define ATM_25_PCR ((25600000/8-8000)/54)
- /* 25 Mbps ATM cell rate (59111) */
-#define ATM_OC12_PCR (622080000/1080*1040/8/53)
- /* OC12 link rate: 622080000 bps
- SONET overhead: /1080*1040
- bits per cell: /8/53
- max cell rate: 1412830.188 cells/sec */
-#define ATM_DS3_PCR (8000*12)
- /* DS3: 12 cells in a 125 usec time slot */
-
-
-#define __AAL_STAT_ITEMS \
- __HANDLE_ITEM(tx); /* TX okay */ \
- __HANDLE_ITEM(tx_err); /* TX errors */ \
- __HANDLE_ITEM(rx); /* RX okay */ \
- __HANDLE_ITEM(rx_err); /* RX errors */ \
- __HANDLE_ITEM(rx_drop); /* RX out of memory */
-
-struct atm_aal_stats {
-#define __HANDLE_ITEM(i) int i
- __AAL_STAT_ITEMS
-#undef __HANDLE_ITEM
-};
-
-
-struct atm_dev_stats {
- struct atm_aal_stats aal0;
- struct atm_aal_stats aal34;
- struct atm_aal_stats aal5;
-} __ATM_API_ALIGN;
-
-
-#define ATM_GETLINKRATE _IOW('a',ATMIOC_ITF+1,struct atmif_sioc)
- /* get link rate */
-#define ATM_GETNAMES _IOW('a',ATMIOC_ITF+3,struct atm_iobuf)
- /* get interface names (numbers) */
-#define ATM_GETTYPE _IOW('a',ATMIOC_ITF+4,struct atmif_sioc)
- /* get interface type name */
-#define ATM_GETESI _IOW('a',ATMIOC_ITF+5,struct atmif_sioc)
- /* get interface ESI */
-#define ATM_GETADDR _IOW('a',ATMIOC_ITF+6,struct atmif_sioc)
- /* get itf's local ATM addr. list */
-#define ATM_RSTADDR _IOW('a',ATMIOC_ITF+7,struct atmif_sioc)
- /* reset itf's ATM address list */
-#define ATM_ADDADDR _IOW('a',ATMIOC_ITF+8,struct atmif_sioc)
- /* add a local ATM address */
-#define ATM_DELADDR _IOW('a',ATMIOC_ITF+9,struct atmif_sioc)
- /* remove a local ATM address */
-#define ATM_GETCIRANGE _IOW('a',ATMIOC_ITF+10,struct atmif_sioc)
- /* get connection identifier range */
-#define ATM_SETCIRANGE _IOW('a',ATMIOC_ITF+11,struct atmif_sioc)
- /* set connection identifier range */
-#define ATM_SETESI _IOW('a',ATMIOC_ITF+12,struct atmif_sioc)
- /* set interface ESI */
-#define ATM_SETESIF _IOW('a',ATMIOC_ITF+13,struct atmif_sioc)
- /* force interface ESI */
-#define ATM_ADDLECSADDR _IOW('a', ATMIOC_ITF+14, struct atmif_sioc)
- /* register a LECS address */
-#define ATM_DELLECSADDR _IOW('a', ATMIOC_ITF+15, struct atmif_sioc)
- /* unregister a LECS address */
-#define ATM_GETLECSADDR _IOW('a', ATMIOC_ITF+16, struct atmif_sioc)
- /* retrieve LECS address(es) */
-
-#define ATM_GETSTAT _IOW('a',ATMIOC_SARCOM+0,struct atmif_sioc)
- /* get AAL layer statistics */
-#define ATM_GETSTATZ _IOW('a',ATMIOC_SARCOM+1,struct atmif_sioc)
- /* get AAL layer statistics and zero */
-#define ATM_GETLOOP _IOW('a',ATMIOC_SARCOM+2,struct atmif_sioc)
- /* get loopback mode */
-#define ATM_SETLOOP _IOW('a',ATMIOC_SARCOM+3,struct atmif_sioc)
- /* set loopback mode */
-#define ATM_QUERYLOOP _IOW('a',ATMIOC_SARCOM+4,struct atmif_sioc)
- /* query supported loopback modes */
-#define ATM_SETSC _IOW('a',ATMIOC_SPECIAL+1,int)
- /* enable or disable single-copy */
-#define ATM_SETBACKEND _IOW('a',ATMIOC_SPECIAL+2,atm_backend_t)
- /* set backend handler */
-#define ATM_NEWBACKENDIF _IOW('a',ATMIOC_SPECIAL+3,atm_backend_t)
- /* use backend to make new if */
-#define ATM_ADDPARTY _IOW('a', ATMIOC_SPECIAL+4,struct atm_iobuf)
- /* add party to p2mp call */
-#ifdef CONFIG_COMPAT
-/* It actually takes struct sockaddr_atmsvc, not struct atm_iobuf */
-#define COMPAT_ATM_ADDPARTY _IOW('a', ATMIOC_SPECIAL+4,struct compat_atm_iobuf)
-#endif
-#define ATM_DROPPARTY _IOW('a', ATMIOC_SPECIAL+5,int)
- /* drop party from p2mp call */
-
-/*
- * These are backend handkers that can be set via the ATM_SETBACKEND call
- * above. In the future we may support dynamic loading of these - for now,
- * they're just being used to share the ATMIOC_BACKEND ioctls
- */
-#define ATM_BACKEND_RAW 0
-#define ATM_BACKEND_PPP 1 /* PPPoATM - RFC2364 */
-#define ATM_BACKEND_BR2684 2 /* Bridged RFC1483/2684 */
-
-/* for ATM_GETTYPE */
-#define ATM_ITFTYP_LEN 8 /* maximum length of interface type name */
-
-/*
- * Loopback modes for ATM_{PHY,SAR}_{GET,SET}LOOP
- */
-
-/* Point of loopback CPU-->SAR-->PHY-->line--> ... */
-#define __ATM_LM_NONE 0 /* no loop back ^ ^ ^ ^ */
-#define __ATM_LM_AAL 1 /* loop back PDUs --' | | | */
-#define __ATM_LM_ATM 2 /* loop back ATM cells ---' | | */
-/* RESERVED 4 loop back on PHY side ---' */
-#define __ATM_LM_PHY 8 /* loop back bits (digital) ----' | */
-#define __ATM_LM_ANALOG 16 /* loop back the analog signal --------' */
-
-/* Direction of loopback */
-#define __ATM_LM_MKLOC(n) ((n)) /* Local (i.e. loop TX to RX) */
-#define __ATM_LM_MKRMT(n) ((n) << 8) /* Remote (i.e. loop RX to TX) */
-
-#define __ATM_LM_XTLOC(n) ((n) & 0xff)
-#define __ATM_LM_XTRMT(n) (((n) >> 8) & 0xff)
-
-#define ATM_LM_NONE 0 /* no loopback */
-
-#define ATM_LM_LOC_AAL __ATM_LM_MKLOC(__ATM_LM_AAL)
-#define ATM_LM_LOC_ATM __ATM_LM_MKLOC(__ATM_LM_ATM)
-#define ATM_LM_LOC_PHY __ATM_LM_MKLOC(__ATM_LM_PHY)
-#define ATM_LM_LOC_ANALOG __ATM_LM_MKLOC(__ATM_LM_ANALOG)
-
-#define ATM_LM_RMT_AAL __ATM_LM_MKRMT(__ATM_LM_AAL)
-#define ATM_LM_RMT_ATM __ATM_LM_MKRMT(__ATM_LM_ATM)
-#define ATM_LM_RMT_PHY __ATM_LM_MKRMT(__ATM_LM_PHY)
-#define ATM_LM_RMT_ANALOG __ATM_LM_MKRMT(__ATM_LM_ANALOG)
-
-/*
- * Note: ATM_LM_LOC_* and ATM_LM_RMT_* can be combined, provided that
- * __ATM_LM_XTLOC(x) <= __ATM_LM_XTRMT(x)
- */
-
-
-struct atm_iobuf {
- int length;
- void __user *buffer;
-};
-
-/* for ATM_GETCIRANGE / ATM_SETCIRANGE */
-
-#define ATM_CI_MAX -1 /* use maximum range of VPI/VCI */
-
-struct atm_cirange {
- signed char vpi_bits; /* 1..8, ATM_CI_MAX (-1) for maximum */
- signed char vci_bits; /* 1..16, ATM_CI_MAX (-1) for maximum */
-};
-
-/* for ATM_SETSC; actually taken from the ATM_VF number space */
-
-#define ATM_SC_RX 1024 /* enable RX single-copy */
-#define ATM_SC_TX 2048 /* enable TX single-copy */
-
-#define ATM_BACKLOG_DEFAULT 32 /* if we get more, we're likely to time out
- anyway */
-
-/* MF: change_qos (Modify) flags */
-
-#define ATM_MF_IMMED 1 /* Block until change is effective */
-#define ATM_MF_INC_RSV 2 /* Change reservation on increase */
-#define ATM_MF_INC_SHP 4 /* Change shaping on increase */
-#define ATM_MF_DEC_RSV 8 /* Change reservation on decrease */
-#define ATM_MF_DEC_SHP 16 /* Change shaping on decrease */
-#define ATM_MF_BWD 32 /* Set the backward direction parameters */
-
-#define ATM_MF_SET (ATM_MF_INC_RSV | ATM_MF_INC_SHP | ATM_MF_DEC_RSV | \
- ATM_MF_DEC_SHP | ATM_MF_BWD)
-
-/*
- * ATM_VS_* are used to express VC state in a human-friendly way.
- */
-
-#define ATM_VS_IDLE 0 /* VC is not used */
-#define ATM_VS_CONNECTED 1 /* VC is connected */
-#define ATM_VS_CLOSING 2 /* VC is closing */
-#define ATM_VS_LISTEN 3 /* VC is listening for incoming setups */
-#define ATM_VS_INUSE 4 /* VC is in use (registered with atmsigd) */
-#define ATM_VS_BOUND 5 /* VC is bound */
-
-#define ATM_VS2TXT_MAP \
- "IDLE", "CONNECTED", "CLOSING", "LISTEN", "INUSE", "BOUND"
-
-#define ATM_VF2TXT_MAP \
- "ADDR", "READY", "PARTIAL", "REGIS", \
- "RELEASED", "HASQOS", "LISTEN", "META", \
- "256", "512", "1024", "2048", \
- "SESSION", "HASSAP", "BOUND", "CLOSE"
-
-
-#ifdef __KERNEL__
-
#include <linux/wait.h> /* wait_queue_head_t */
#include <linux/time.h> /* struct timeval */
#include <linux/net.h>
@@ -221,6 +11,7 @@
#include <linux/uio.h>
#include <net/sock.h>
#include <linux/atomic.h>
+#include <uapi/linux/atmdev.h>
#ifdef CONFIG_PROC_FS
#include <linux/proc_fs.h>
@@ -521,6 +312,4 @@
int register_atmdevice_notifier(struct notifier_block *nb);
void unregister_atmdevice_notifier(struct notifier_block *nb);
-#endif /* __KERNEL__ */
-
#endif
diff --git a/include/linux/audit.h b/include/linux/audit.h
index b889fa6..bce729a 100644
--- a/include/linux/audit.h
+++ b/include/linux/audit.h
@@ -20,389 +20,11 @@
* Written by Rickard E. (Rik) Faith <faith@redhat.com>
*
*/
-
#ifndef _LINUX_AUDIT_H_
#define _LINUX_AUDIT_H_
-#include <linux/types.h>
-#include <linux/elf-em.h>
-#include <linux/ptrace.h>
-
-/* The netlink messages for the audit system is divided into blocks:
- * 1000 - 1099 are for commanding the audit system
- * 1100 - 1199 user space trusted application messages
- * 1200 - 1299 messages internal to the audit daemon
- * 1300 - 1399 audit event messages
- * 1400 - 1499 SE Linux use
- * 1500 - 1599 kernel LSPP events
- * 1600 - 1699 kernel crypto events
- * 1700 - 1799 kernel anomaly records
- * 1800 - 1899 kernel integrity events
- * 1900 - 1999 future kernel use
- * 2000 is for otherwise unclassified kernel audit messages (legacy)
- * 2001 - 2099 unused (kernel)
- * 2100 - 2199 user space anomaly records
- * 2200 - 2299 user space actions taken in response to anomalies
- * 2300 - 2399 user space generated LSPP events
- * 2400 - 2499 user space crypto events
- * 2500 - 2999 future user space (maybe integrity labels and related events)
- *
- * Messages from 1000-1199 are bi-directional. 1200-1299 & 2100 - 2999 are
- * exclusively user space. 1300-2099 is kernel --> user space
- * communication.
- */
-#define AUDIT_GET 1000 /* Get status */
-#define AUDIT_SET 1001 /* Set status (enable/disable/auditd) */
-#define AUDIT_LIST 1002 /* List syscall rules -- deprecated */
-#define AUDIT_ADD 1003 /* Add syscall rule -- deprecated */
-#define AUDIT_DEL 1004 /* Delete syscall rule -- deprecated */
-#define AUDIT_USER 1005 /* Message from userspace -- deprecated */
-#define AUDIT_LOGIN 1006 /* Define the login id and information */
-#define AUDIT_WATCH_INS 1007 /* Insert file/dir watch entry */
-#define AUDIT_WATCH_REM 1008 /* Remove file/dir watch entry */
-#define AUDIT_WATCH_LIST 1009 /* List all file/dir watches */
-#define AUDIT_SIGNAL_INFO 1010 /* Get info about sender of signal to auditd */
-#define AUDIT_ADD_RULE 1011 /* Add syscall filtering rule */
-#define AUDIT_DEL_RULE 1012 /* Delete syscall filtering rule */
-#define AUDIT_LIST_RULES 1013 /* List syscall filtering rules */
-#define AUDIT_TRIM 1014 /* Trim junk from watched tree */
-#define AUDIT_MAKE_EQUIV 1015 /* Append to watched tree */
-#define AUDIT_TTY_GET 1016 /* Get TTY auditing status */
-#define AUDIT_TTY_SET 1017 /* Set TTY auditing status */
-
-#define AUDIT_FIRST_USER_MSG 1100 /* Userspace messages mostly uninteresting to kernel */
-#define AUDIT_USER_AVC 1107 /* We filter this differently */
-#define AUDIT_USER_TTY 1124 /* Non-ICANON TTY input meaning */
-#define AUDIT_LAST_USER_MSG 1199
-#define AUDIT_FIRST_USER_MSG2 2100 /* More user space messages */
-#define AUDIT_LAST_USER_MSG2 2999
-
-#define AUDIT_DAEMON_START 1200 /* Daemon startup record */
-#define AUDIT_DAEMON_END 1201 /* Daemon normal stop record */
-#define AUDIT_DAEMON_ABORT 1202 /* Daemon error stop record */
-#define AUDIT_DAEMON_CONFIG 1203 /* Daemon config change */
-
-#define AUDIT_SYSCALL 1300 /* Syscall event */
-/* #define AUDIT_FS_WATCH 1301 * Deprecated */
-#define AUDIT_PATH 1302 /* Filename path information */
-#define AUDIT_IPC 1303 /* IPC record */
-#define AUDIT_SOCKETCALL 1304 /* sys_socketcall arguments */
-#define AUDIT_CONFIG_CHANGE 1305 /* Audit system configuration change */
-#define AUDIT_SOCKADDR 1306 /* sockaddr copied as syscall arg */
-#define AUDIT_CWD 1307 /* Current working directory */
-#define AUDIT_EXECVE 1309 /* execve arguments */
-#define AUDIT_IPC_SET_PERM 1311 /* IPC new permissions record type */
-#define AUDIT_MQ_OPEN 1312 /* POSIX MQ open record type */
-#define AUDIT_MQ_SENDRECV 1313 /* POSIX MQ send/receive record type */
-#define AUDIT_MQ_NOTIFY 1314 /* POSIX MQ notify record type */
-#define AUDIT_MQ_GETSETATTR 1315 /* POSIX MQ get/set attribute record type */
-#define AUDIT_KERNEL_OTHER 1316 /* For use by 3rd party modules */
-#define AUDIT_FD_PAIR 1317 /* audit record for pipe/socketpair */
-#define AUDIT_OBJ_PID 1318 /* ptrace target */
-#define AUDIT_TTY 1319 /* Input on an administrative TTY */
-#define AUDIT_EOE 1320 /* End of multi-record event */
-#define AUDIT_BPRM_FCAPS 1321 /* Information about fcaps increasing perms */
-#define AUDIT_CAPSET 1322 /* Record showing argument to sys_capset */
-#define AUDIT_MMAP 1323 /* Record showing descriptor and flags in mmap */
-#define AUDIT_NETFILTER_PKT 1324 /* Packets traversing netfilter chains */
-#define AUDIT_NETFILTER_CFG 1325 /* Netfilter chain modifications */
-
-#define AUDIT_AVC 1400 /* SE Linux avc denial or grant */
-#define AUDIT_SELINUX_ERR 1401 /* Internal SE Linux Errors */
-#define AUDIT_AVC_PATH 1402 /* dentry, vfsmount pair from avc */
-#define AUDIT_MAC_POLICY_LOAD 1403 /* Policy file load */
-#define AUDIT_MAC_STATUS 1404 /* Changed enforcing,permissive,off */
-#define AUDIT_MAC_CONFIG_CHANGE 1405 /* Changes to booleans */
-#define AUDIT_MAC_UNLBL_ALLOW 1406 /* NetLabel: allow unlabeled traffic */
-#define AUDIT_MAC_CIPSOV4_ADD 1407 /* NetLabel: add CIPSOv4 DOI entry */
-#define AUDIT_MAC_CIPSOV4_DEL 1408 /* NetLabel: del CIPSOv4 DOI entry */
-#define AUDIT_MAC_MAP_ADD 1409 /* NetLabel: add LSM domain mapping */
-#define AUDIT_MAC_MAP_DEL 1410 /* NetLabel: del LSM domain mapping */
-#define AUDIT_MAC_IPSEC_ADDSA 1411 /* Not used */
-#define AUDIT_MAC_IPSEC_DELSA 1412 /* Not used */
-#define AUDIT_MAC_IPSEC_ADDSPD 1413 /* Not used */
-#define AUDIT_MAC_IPSEC_DELSPD 1414 /* Not used */
-#define AUDIT_MAC_IPSEC_EVENT 1415 /* Audit an IPSec event */
-#define AUDIT_MAC_UNLBL_STCADD 1416 /* NetLabel: add a static label */
-#define AUDIT_MAC_UNLBL_STCDEL 1417 /* NetLabel: del a static label */
-
-#define AUDIT_FIRST_KERN_ANOM_MSG 1700
-#define AUDIT_LAST_KERN_ANOM_MSG 1799
-#define AUDIT_ANOM_PROMISCUOUS 1700 /* Device changed promiscuous mode */
-#define AUDIT_ANOM_ABEND 1701 /* Process ended abnormally */
-#define AUDIT_ANOM_LINK 1702 /* Suspicious use of file links */
-#define AUDIT_INTEGRITY_DATA 1800 /* Data integrity verification */
-#define AUDIT_INTEGRITY_METADATA 1801 /* Metadata integrity verification */
-#define AUDIT_INTEGRITY_STATUS 1802 /* Integrity enable status */
-#define AUDIT_INTEGRITY_HASH 1803 /* Integrity HASH type */
-#define AUDIT_INTEGRITY_PCR 1804 /* PCR invalidation msgs */
-#define AUDIT_INTEGRITY_RULE 1805 /* policy rule */
-
-#define AUDIT_KERNEL 2000 /* Asynchronous audit record. NOT A REQUEST. */
-
-/* Rule flags */
-#define AUDIT_FILTER_USER 0x00 /* Apply rule to user-generated messages */
-#define AUDIT_FILTER_TASK 0x01 /* Apply rule at task creation (not syscall) */
-#define AUDIT_FILTER_ENTRY 0x02 /* Apply rule at syscall entry */
-#define AUDIT_FILTER_WATCH 0x03 /* Apply rule to file system watches */
-#define AUDIT_FILTER_EXIT 0x04 /* Apply rule at syscall exit */
-#define AUDIT_FILTER_TYPE 0x05 /* Apply rule at audit_log_start */
-
-#define AUDIT_NR_FILTERS 6
-
-#define AUDIT_FILTER_PREPEND 0x10 /* Prepend to front of list */
-
-/* Rule actions */
-#define AUDIT_NEVER 0 /* Do not build context if rule matches */
-#define AUDIT_POSSIBLE 1 /* Build context if rule matches */
-#define AUDIT_ALWAYS 2 /* Generate audit record if rule matches */
-
-/* Rule structure sizes -- if these change, different AUDIT_ADD and
- * AUDIT_LIST commands must be implemented. */
-#define AUDIT_MAX_FIELDS 64
-#define AUDIT_MAX_KEY_LEN 256
-#define AUDIT_BITMASK_SIZE 64
-#define AUDIT_WORD(nr) ((__u32)((nr)/32))
-#define AUDIT_BIT(nr) (1 << ((nr) - AUDIT_WORD(nr)*32))
-
-#define AUDIT_SYSCALL_CLASSES 16
-#define AUDIT_CLASS_DIR_WRITE 0
-#define AUDIT_CLASS_DIR_WRITE_32 1
-#define AUDIT_CLASS_CHATTR 2
-#define AUDIT_CLASS_CHATTR_32 3
-#define AUDIT_CLASS_READ 4
-#define AUDIT_CLASS_READ_32 5
-#define AUDIT_CLASS_WRITE 6
-#define AUDIT_CLASS_WRITE_32 7
-#define AUDIT_CLASS_SIGNAL 8
-#define AUDIT_CLASS_SIGNAL_32 9
-
-/* This bitmask is used to validate user input. It represents all bits that
- * are currently used in an audit field constant understood by the kernel.
- * If you are adding a new #define AUDIT_<whatever>, please ensure that
- * AUDIT_UNUSED_BITS is updated if need be. */
-#define AUDIT_UNUSED_BITS 0x07FFFC00
-
-/* AUDIT_FIELD_COMPARE rule list */
-#define AUDIT_COMPARE_UID_TO_OBJ_UID 1
-#define AUDIT_COMPARE_GID_TO_OBJ_GID 2
-#define AUDIT_COMPARE_EUID_TO_OBJ_UID 3
-#define AUDIT_COMPARE_EGID_TO_OBJ_GID 4
-#define AUDIT_COMPARE_AUID_TO_OBJ_UID 5
-#define AUDIT_COMPARE_SUID_TO_OBJ_UID 6
-#define AUDIT_COMPARE_SGID_TO_OBJ_GID 7
-#define AUDIT_COMPARE_FSUID_TO_OBJ_UID 8
-#define AUDIT_COMPARE_FSGID_TO_OBJ_GID 9
-
-#define AUDIT_COMPARE_UID_TO_AUID 10
-#define AUDIT_COMPARE_UID_TO_EUID 11
-#define AUDIT_COMPARE_UID_TO_FSUID 12
-#define AUDIT_COMPARE_UID_TO_SUID 13
-
-#define AUDIT_COMPARE_AUID_TO_FSUID 14
-#define AUDIT_COMPARE_AUID_TO_SUID 15
-#define AUDIT_COMPARE_AUID_TO_EUID 16
-
-#define AUDIT_COMPARE_EUID_TO_SUID 17
-#define AUDIT_COMPARE_EUID_TO_FSUID 18
-
-#define AUDIT_COMPARE_SUID_TO_FSUID 19
-
-#define AUDIT_COMPARE_GID_TO_EGID 20
-#define AUDIT_COMPARE_GID_TO_FSGID 21
-#define AUDIT_COMPARE_GID_TO_SGID 22
-
-#define AUDIT_COMPARE_EGID_TO_FSGID 23
-#define AUDIT_COMPARE_EGID_TO_SGID 24
-#define AUDIT_COMPARE_SGID_TO_FSGID 25
-
-#define AUDIT_MAX_FIELD_COMPARE AUDIT_COMPARE_SGID_TO_FSGID
-
-/* Rule fields */
- /* These are useful when checking the
- * task structure at task creation time
- * (AUDIT_PER_TASK). */
-#define AUDIT_PID 0
-#define AUDIT_UID 1
-#define AUDIT_EUID 2
-#define AUDIT_SUID 3
-#define AUDIT_FSUID 4
-#define AUDIT_GID 5
-#define AUDIT_EGID 6
-#define AUDIT_SGID 7
-#define AUDIT_FSGID 8
-#define AUDIT_LOGINUID 9
-#define AUDIT_PERS 10
-#define AUDIT_ARCH 11
-#define AUDIT_MSGTYPE 12
-#define AUDIT_SUBJ_USER 13 /* security label user */
-#define AUDIT_SUBJ_ROLE 14 /* security label role */
-#define AUDIT_SUBJ_TYPE 15 /* security label type */
-#define AUDIT_SUBJ_SEN 16 /* security label sensitivity label */
-#define AUDIT_SUBJ_CLR 17 /* security label clearance label */
-#define AUDIT_PPID 18
-#define AUDIT_OBJ_USER 19
-#define AUDIT_OBJ_ROLE 20
-#define AUDIT_OBJ_TYPE 21
-#define AUDIT_OBJ_LEV_LOW 22
-#define AUDIT_OBJ_LEV_HIGH 23
-
- /* These are ONLY useful when checking
- * at syscall exit time (AUDIT_AT_EXIT). */
-#define AUDIT_DEVMAJOR 100
-#define AUDIT_DEVMINOR 101
-#define AUDIT_INODE 102
-#define AUDIT_EXIT 103
-#define AUDIT_SUCCESS 104 /* exit >= 0; value ignored */
-#define AUDIT_WATCH 105
-#define AUDIT_PERM 106
-#define AUDIT_DIR 107
-#define AUDIT_FILETYPE 108
-#define AUDIT_OBJ_UID 109
-#define AUDIT_OBJ_GID 110
-#define AUDIT_FIELD_COMPARE 111
-
-#define AUDIT_ARG0 200
-#define AUDIT_ARG1 (AUDIT_ARG0+1)
-#define AUDIT_ARG2 (AUDIT_ARG0+2)
-#define AUDIT_ARG3 (AUDIT_ARG0+3)
-
-#define AUDIT_FILTERKEY 210
-
-#define AUDIT_NEGATE 0x80000000
-
-/* These are the supported operators.
- * 4 2 1 8
- * = > < ?
- * ----------
- * 0 0 0 0 00 nonsense
- * 0 0 0 1 08 & bit mask
- * 0 0 1 0 10 <
- * 0 1 0 0 20 >
- * 0 1 1 0 30 !=
- * 1 0 0 0 40 =
- * 1 0 0 1 48 &= bit test
- * 1 0 1 0 50 <=
- * 1 1 0 0 60 >=
- * 1 1 1 1 78 all operators
- */
-#define AUDIT_BIT_MASK 0x08000000
-#define AUDIT_LESS_THAN 0x10000000
-#define AUDIT_GREATER_THAN 0x20000000
-#define AUDIT_NOT_EQUAL 0x30000000
-#define AUDIT_EQUAL 0x40000000
-#define AUDIT_BIT_TEST (AUDIT_BIT_MASK|AUDIT_EQUAL)
-#define AUDIT_LESS_THAN_OR_EQUAL (AUDIT_LESS_THAN|AUDIT_EQUAL)
-#define AUDIT_GREATER_THAN_OR_EQUAL (AUDIT_GREATER_THAN|AUDIT_EQUAL)
-#define AUDIT_OPERATORS (AUDIT_EQUAL|AUDIT_NOT_EQUAL|AUDIT_BIT_MASK)
-
-enum {
- Audit_equal,
- Audit_not_equal,
- Audit_bitmask,
- Audit_bittest,
- Audit_lt,
- Audit_gt,
- Audit_le,
- Audit_ge,
- Audit_bad
-};
-
-/* Status symbols */
- /* Mask values */
-#define AUDIT_STATUS_ENABLED 0x0001
-#define AUDIT_STATUS_FAILURE 0x0002
-#define AUDIT_STATUS_PID 0x0004
-#define AUDIT_STATUS_RATE_LIMIT 0x0008
-#define AUDIT_STATUS_BACKLOG_LIMIT 0x0010
- /* Failure-to-log actions */
-#define AUDIT_FAIL_SILENT 0
-#define AUDIT_FAIL_PRINTK 1
-#define AUDIT_FAIL_PANIC 2
-
-/* distinguish syscall tables */
-#define __AUDIT_ARCH_64BIT 0x80000000
-#define __AUDIT_ARCH_LE 0x40000000
-#define AUDIT_ARCH_ALPHA (EM_ALPHA|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
-#define AUDIT_ARCH_ARM (EM_ARM|__AUDIT_ARCH_LE)
-#define AUDIT_ARCH_ARMEB (EM_ARM)
-#define AUDIT_ARCH_CRIS (EM_CRIS|__AUDIT_ARCH_LE)
-#define AUDIT_ARCH_FRV (EM_FRV)
-#define AUDIT_ARCH_H8300 (EM_H8_300)
-#define AUDIT_ARCH_I386 (EM_386|__AUDIT_ARCH_LE)
-#define AUDIT_ARCH_IA64 (EM_IA_64|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
-#define AUDIT_ARCH_M32R (EM_M32R)
-#define AUDIT_ARCH_M68K (EM_68K)
-#define AUDIT_ARCH_MIPS (EM_MIPS)
-#define AUDIT_ARCH_MIPSEL (EM_MIPS|__AUDIT_ARCH_LE)
-#define AUDIT_ARCH_MIPS64 (EM_MIPS|__AUDIT_ARCH_64BIT)
-#define AUDIT_ARCH_MIPSEL64 (EM_MIPS|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
-#define AUDIT_ARCH_OPENRISC (EM_OPENRISC)
-#define AUDIT_ARCH_PARISC (EM_PARISC)
-#define AUDIT_ARCH_PARISC64 (EM_PARISC|__AUDIT_ARCH_64BIT)
-#define AUDIT_ARCH_PPC (EM_PPC)
-#define AUDIT_ARCH_PPC64 (EM_PPC64|__AUDIT_ARCH_64BIT)
-#define AUDIT_ARCH_S390 (EM_S390)
-#define AUDIT_ARCH_S390X (EM_S390|__AUDIT_ARCH_64BIT)
-#define AUDIT_ARCH_SH (EM_SH)
-#define AUDIT_ARCH_SHEL (EM_SH|__AUDIT_ARCH_LE)
-#define AUDIT_ARCH_SH64 (EM_SH|__AUDIT_ARCH_64BIT)
-#define AUDIT_ARCH_SHEL64 (EM_SH|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
-#define AUDIT_ARCH_SPARC (EM_SPARC)
-#define AUDIT_ARCH_SPARC64 (EM_SPARCV9|__AUDIT_ARCH_64BIT)
-#define AUDIT_ARCH_X86_64 (EM_X86_64|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
-
-#define AUDIT_PERM_EXEC 1
-#define AUDIT_PERM_WRITE 2
-#define AUDIT_PERM_READ 4
-#define AUDIT_PERM_ATTR 8
-
-struct audit_status {
- __u32 mask; /* Bit mask for valid entries */
- __u32 enabled; /* 1 = enabled, 0 = disabled */
- __u32 failure; /* Failure-to-log action */
- __u32 pid; /* pid of auditd process */
- __u32 rate_limit; /* messages rate limit (per second) */
- __u32 backlog_limit; /* waiting messages limit */
- __u32 lost; /* messages lost */
- __u32 backlog; /* messages waiting in queue */
-};
-
-struct audit_tty_status {
- __u32 enabled; /* 1 = enabled, 0 = disabled */
-};
-
-/* audit_rule_data supports filter rules with both integer and string
- * fields. It corresponds with AUDIT_ADD_RULE, AUDIT_DEL_RULE and
- * AUDIT_LIST_RULES requests.
- */
-struct audit_rule_data {
- __u32 flags; /* AUDIT_PER_{TASK,CALL}, AUDIT_PREPEND */
- __u32 action; /* AUDIT_NEVER, AUDIT_POSSIBLE, AUDIT_ALWAYS */
- __u32 field_count;
- __u32 mask[AUDIT_BITMASK_SIZE]; /* syscall(s) affected */
- __u32 fields[AUDIT_MAX_FIELDS];
- __u32 values[AUDIT_MAX_FIELDS];
- __u32 fieldflags[AUDIT_MAX_FIELDS];
- __u32 buflen; /* total length of string fields */
- char buf[0]; /* string fields buffer */
-};
-
-/* audit_rule is supported to maintain backward compatibility with
- * userspace. It supports integer fields only and corresponds to
- * AUDIT_ADD, AUDIT_DEL and AUDIT_LIST requests.
- */
-struct audit_rule { /* for AUDIT_LIST, AUDIT_ADD, and AUDIT_DEL */
- __u32 flags; /* AUDIT_PER_{TASK,CALL}, AUDIT_PREPEND */
- __u32 action; /* AUDIT_NEVER, AUDIT_POSSIBLE, AUDIT_ALWAYS */
- __u32 field_count;
- __u32 mask[AUDIT_BITMASK_SIZE];
- __u32 fields[AUDIT_MAX_FIELDS];
- __u32 values[AUDIT_MAX_FIELDS];
-};
-
-#ifdef __KERNEL__
#include <linux/sched.h>
+#include <uapi/linux/audit.h>
struct audit_sig_info {
uid_t uid;
@@ -860,4 +482,3 @@
}
#endif
-#endif
diff --git a/include/linux/auto_fs.h b/include/linux/auto_fs.h
index da64e15..fcd704d 100644
--- a/include/linux/auto_fs.h
+++ b/include/linux/auto_fs.h
@@ -10,77 +10,11 @@
*
* ----------------------------------------------------------------------- */
-
#ifndef _LINUX_AUTO_FS_H
#define _LINUX_AUTO_FS_H
-#include <linux/types.h>
-#ifdef __KERNEL__
#include <linux/fs.h>
#include <linux/limits.h>
#include <linux/ioctl.h>
-#else
-#include <sys/ioctl.h>
-#endif /* __KERNEL__ */
-
-/* This file describes autofs v3 */
-#define AUTOFS_PROTO_VERSION 3
-
-/* Range of protocol versions defined */
-#define AUTOFS_MAX_PROTO_VERSION AUTOFS_PROTO_VERSION
-#define AUTOFS_MIN_PROTO_VERSION AUTOFS_PROTO_VERSION
-
-/*
- * Architectures where both 32- and 64-bit binaries can be executed
- * on 64-bit kernels need this. This keeps the structure format
- * uniform, and makes sure the wait_queue_token isn't too big to be
- * passed back down to the kernel.
- *
- * This assumes that on these architectures:
- * mode 32 bit 64 bit
- * -------------------------
- * int 32 bit 32 bit
- * long 32 bit 64 bit
- *
- * If so, 32-bit user-space code should be backwards compatible.
- */
-
-#if defined(__sparc__) || defined(__mips__) || defined(__x86_64__) \
- || defined(__powerpc__) || defined(__s390__)
-typedef unsigned int autofs_wqt_t;
-#else
-typedef unsigned long autofs_wqt_t;
-#endif
-
-/* Packet types */
-#define autofs_ptype_missing 0 /* Missing entry (mount request) */
-#define autofs_ptype_expire 1 /* Expire entry (umount request) */
-
-struct autofs_packet_hdr {
- int proto_version; /* Protocol version */
- int type; /* Type of packet */
-};
-
-struct autofs_packet_missing {
- struct autofs_packet_hdr hdr;
- autofs_wqt_t wait_queue_token;
- int len;
- char name[NAME_MAX+1];
-};
-
-/* v3 expire (via ioctl) */
-struct autofs_packet_expire {
- struct autofs_packet_hdr hdr;
- int len;
- char name[NAME_MAX+1];
-};
-
-#define AUTOFS_IOC_READY _IO(0x93,0x60)
-#define AUTOFS_IOC_FAIL _IO(0x93,0x61)
-#define AUTOFS_IOC_CATATONIC _IO(0x93,0x62)
-#define AUTOFS_IOC_PROTOVER _IOR(0x93,0x63,int)
-#define AUTOFS_IOC_SETTIMEOUT32 _IOWR(0x93,0x64,compat_ulong_t)
-#define AUTOFS_IOC_SETTIMEOUT _IOWR(0x93,0x64,unsigned long)
-#define AUTOFS_IOC_EXPIRE _IOR(0x93,0x65,struct autofs_packet_expire)
-
+#include <uapi/linux/auto_fs.h>
#endif /* _LINUX_AUTO_FS_H */
diff --git a/include/linux/auxvec.h b/include/linux/auxvec.h
index f3b5d4e..669fef5 100644
--- a/include/linux/auxvec.h
+++ b/include/linux/auxvec.h
@@ -1,39 +1,8 @@
#ifndef _LINUX_AUXVEC_H
#define _LINUX_AUXVEC_H
-#include <asm/auxvec.h>
+#include <uapi/linux/auxvec.h>
-/* Symbolic values for the entries in the auxiliary table
- put on the initial stack */
-#define AT_NULL 0 /* end of vector */
-#define AT_IGNORE 1 /* entry should be ignored */
-#define AT_EXECFD 2 /* file descriptor of program */
-#define AT_PHDR 3 /* program headers for program */
-#define AT_PHENT 4 /* size of program header entry */
-#define AT_PHNUM 5 /* number of program headers */
-#define AT_PAGESZ 6 /* system page size */
-#define AT_BASE 7 /* base address of interpreter */
-#define AT_FLAGS 8 /* flags */
-#define AT_ENTRY 9 /* entry point of program */
-#define AT_NOTELF 10 /* program is not ELF */
-#define AT_UID 11 /* real uid */
-#define AT_EUID 12 /* effective uid */
-#define AT_GID 13 /* real gid */
-#define AT_EGID 14 /* effective gid */
-#define AT_PLATFORM 15 /* string identifying CPU for optimizations */
-#define AT_HWCAP 16 /* arch dependent hints at CPU capabilities */
-#define AT_CLKTCK 17 /* frequency at which times() increments */
-/* AT_* values 18 through 22 are reserved */
-#define AT_SECURE 23 /* secure mode boolean */
-#define AT_BASE_PLATFORM 24 /* string identifying real platform, may
- * differ from AT_PLATFORM. */
-#define AT_RANDOM 25 /* address of 16 random bytes */
-
-#define AT_EXECFN 31 /* filename of program */
-
-#ifdef __KERNEL__
#define AT_VECTOR_SIZE_BASE 19 /* NEW_AUX_ENT entries in auxiliary table */
/* number of "#define AT_.*" above, minus {AT_NULL, AT_IGNORE, AT_NOTELF} */
-#endif
-
#endif /* _LINUX_AUXVEC_H */
diff --git a/include/linux/binfmts.h b/include/linux/binfmts.h
index 26531f3..cfcc6bf 100644
--- a/include/linux/binfmts.h
+++ b/include/linux/binfmts.h
@@ -1,26 +1,10 @@
#ifndef _LINUX_BINFMTS_H
#define _LINUX_BINFMTS_H
-#include <linux/capability.h>
-
-struct pt_regs;
-
-/*
- * These are the maximum length and maximum number of strings passed to the
- * execve() system call. MAX_ARG_STRLEN is essentially random but serves to
- * prevent the kernel from being unduly impacted by misaddressed pointers.
- * MAX_ARG_STRINGS is chosen to fit in a signed 32-bit integer.
- */
-#define MAX_ARG_STRLEN (PAGE_SIZE * 32)
-#define MAX_ARG_STRINGS 0x7FFFFFFF
-
-/* sizeof(linux_binprm->buf) */
-#define BINPRM_BUF_SIZE 128
-
-#ifdef __KERNEL__
#include <linux/sched.h>
#include <linux/unistd.h>
#include <asm/exec.h>
+#include <uapi/linux/binfmts.h>
#define CORENAME_MAX_SIZE 128
@@ -141,5 +125,4 @@
extern void ret_from_kernel_execve(struct pt_regs *normal) __noreturn;
#endif
-#endif /* __KERNEL__ */
#endif /* _LINUX_BINFMTS_H */
diff --git a/include/linux/blktrace_api.h b/include/linux/blktrace_api.h
index 4d1a074..7c2e030 100644
--- a/include/linux/blktrace_api.h
+++ b/include/linux/blktrace_api.h
@@ -1,150 +1,11 @@
#ifndef BLKTRACE_H
#define BLKTRACE_H
-#include <linux/types.h>
-#ifdef __KERNEL__
#include <linux/blkdev.h>
#include <linux/relay.h>
#include <linux/compat.h>
-#endif
+#include <uapi/linux/blktrace_api.h>
-/*
- * Trace categories
- */
-enum blktrace_cat {
- BLK_TC_READ = 1 << 0, /* reads */
- BLK_TC_WRITE = 1 << 1, /* writes */
- BLK_TC_FLUSH = 1 << 2, /* flush */
- BLK_TC_SYNC = 1 << 3, /* sync IO */
- BLK_TC_SYNCIO = BLK_TC_SYNC,
- BLK_TC_QUEUE = 1 << 4, /* queueing/merging */
- BLK_TC_REQUEUE = 1 << 5, /* requeueing */
- BLK_TC_ISSUE = 1 << 6, /* issue */
- BLK_TC_COMPLETE = 1 << 7, /* completions */
- BLK_TC_FS = 1 << 8, /* fs requests */
- BLK_TC_PC = 1 << 9, /* pc requests */
- BLK_TC_NOTIFY = 1 << 10, /* special message */
- BLK_TC_AHEAD = 1 << 11, /* readahead */
- BLK_TC_META = 1 << 12, /* metadata */
- BLK_TC_DISCARD = 1 << 13, /* discard requests */
- BLK_TC_DRV_DATA = 1 << 14, /* binary per-driver data */
- BLK_TC_FUA = 1 << 15, /* fua requests */
-
- BLK_TC_END = 1 << 15, /* we've run out of bits! */
-};
-
-#define BLK_TC_SHIFT (16)
-#define BLK_TC_ACT(act) ((act) << BLK_TC_SHIFT)
-
-/*
- * Basic trace actions
- */
-enum blktrace_act {
- __BLK_TA_QUEUE = 1, /* queued */
- __BLK_TA_BACKMERGE, /* back merged to existing rq */
- __BLK_TA_FRONTMERGE, /* front merge to existing rq */
- __BLK_TA_GETRQ, /* allocated new request */
- __BLK_TA_SLEEPRQ, /* sleeping on rq allocation */
- __BLK_TA_REQUEUE, /* request requeued */
- __BLK_TA_ISSUE, /* sent to driver */
- __BLK_TA_COMPLETE, /* completed by driver */
- __BLK_TA_PLUG, /* queue was plugged */
- __BLK_TA_UNPLUG_IO, /* queue was unplugged by io */
- __BLK_TA_UNPLUG_TIMER, /* queue was unplugged by timer */
- __BLK_TA_INSERT, /* insert request */
- __BLK_TA_SPLIT, /* bio was split */
- __BLK_TA_BOUNCE, /* bio was bounced */
- __BLK_TA_REMAP, /* bio was remapped */
- __BLK_TA_ABORT, /* request aborted */
- __BLK_TA_DRV_DATA, /* driver-specific binary data */
-};
-
-/*
- * Notify events.
- */
-enum blktrace_notify {
- __BLK_TN_PROCESS = 0, /* establish pid/name mapping */
- __BLK_TN_TIMESTAMP, /* include system clock */
- __BLK_TN_MESSAGE, /* Character string message */
-};
-
-
-/*
- * Trace actions in full. Additionally, read or write is masked
- */
-#define BLK_TA_QUEUE (__BLK_TA_QUEUE | BLK_TC_ACT(BLK_TC_QUEUE))
-#define BLK_TA_BACKMERGE (__BLK_TA_BACKMERGE | BLK_TC_ACT(BLK_TC_QUEUE))
-#define BLK_TA_FRONTMERGE (__BLK_TA_FRONTMERGE | BLK_TC_ACT(BLK_TC_QUEUE))
-#define BLK_TA_GETRQ (__BLK_TA_GETRQ | BLK_TC_ACT(BLK_TC_QUEUE))
-#define BLK_TA_SLEEPRQ (__BLK_TA_SLEEPRQ | BLK_TC_ACT(BLK_TC_QUEUE))
-#define BLK_TA_REQUEUE (__BLK_TA_REQUEUE | BLK_TC_ACT(BLK_TC_REQUEUE))
-#define BLK_TA_ISSUE (__BLK_TA_ISSUE | BLK_TC_ACT(BLK_TC_ISSUE))
-#define BLK_TA_COMPLETE (__BLK_TA_COMPLETE| BLK_TC_ACT(BLK_TC_COMPLETE))
-#define BLK_TA_PLUG (__BLK_TA_PLUG | BLK_TC_ACT(BLK_TC_QUEUE))
-#define BLK_TA_UNPLUG_IO (__BLK_TA_UNPLUG_IO | BLK_TC_ACT(BLK_TC_QUEUE))
-#define BLK_TA_UNPLUG_TIMER (__BLK_TA_UNPLUG_TIMER | BLK_TC_ACT(BLK_TC_QUEUE))
-#define BLK_TA_INSERT (__BLK_TA_INSERT | BLK_TC_ACT(BLK_TC_QUEUE))
-#define BLK_TA_SPLIT (__BLK_TA_SPLIT)
-#define BLK_TA_BOUNCE (__BLK_TA_BOUNCE)
-#define BLK_TA_REMAP (__BLK_TA_REMAP | BLK_TC_ACT(BLK_TC_QUEUE))
-#define BLK_TA_ABORT (__BLK_TA_ABORT | BLK_TC_ACT(BLK_TC_QUEUE))
-#define BLK_TA_DRV_DATA (__BLK_TA_DRV_DATA | BLK_TC_ACT(BLK_TC_DRV_DATA))
-
-#define BLK_TN_PROCESS (__BLK_TN_PROCESS | BLK_TC_ACT(BLK_TC_NOTIFY))
-#define BLK_TN_TIMESTAMP (__BLK_TN_TIMESTAMP | BLK_TC_ACT(BLK_TC_NOTIFY))
-#define BLK_TN_MESSAGE (__BLK_TN_MESSAGE | BLK_TC_ACT(BLK_TC_NOTIFY))
-
-#define BLK_IO_TRACE_MAGIC 0x65617400
-#define BLK_IO_TRACE_VERSION 0x07
-
-/*
- * The trace itself
- */
-struct blk_io_trace {
- __u32 magic; /* MAGIC << 8 | version */
- __u32 sequence; /* event number */
- __u64 time; /* in microseconds */
- __u64 sector; /* disk offset */
- __u32 bytes; /* transfer length */
- __u32 action; /* what happened */
- __u32 pid; /* who did it */
- __u32 device; /* device number */
- __u32 cpu; /* on what cpu did it happen */
- __u16 error; /* completion error */
- __u16 pdu_len; /* length of data after this trace */
-};
-
-/*
- * The remap event
- */
-struct blk_io_trace_remap {
- __be32 device_from;
- __be32 device_to;
- __be64 sector_from;
-};
-
-enum {
- Blktrace_setup = 1,
- Blktrace_running,
- Blktrace_stopped,
-};
-
-#define BLKTRACE_BDEV_SIZE 32
-
-/*
- * User setup structure passed with BLKTRACESTART
- */
-struct blk_user_trace_setup {
- char name[BLKTRACE_BDEV_SIZE]; /* output */
- __u16 act_mask; /* input */
- __u32 buf_size; /* input */
- __u32 buf_nr; /* input */
- __u64 start_lba;
- __u64 end_lba;
- __u32 pid;
-};
-
-#ifdef __KERNEL__
#if defined(CONFIG_BLK_DEV_IO_TRACE)
#include <linux/sysfs.h>
@@ -250,5 +111,4 @@
#endif /* CONFIG_EVENT_TRACING && CONFIG_BLOCK */
-#endif /* __KERNEL__ */
#endif
diff --git a/include/linux/bsg.h b/include/linux/bsg.h
index ecb4730..7173f6e 100644
--- a/include/linux/bsg.h
+++ b/include/linux/bsg.h
@@ -1,67 +1,8 @@
#ifndef BSG_H
#define BSG_H
-#include <linux/types.h>
+#include <uapi/linux/bsg.h>
-#define BSG_PROTOCOL_SCSI 0
-
-#define BSG_SUB_PROTOCOL_SCSI_CMD 0
-#define BSG_SUB_PROTOCOL_SCSI_TMF 1
-#define BSG_SUB_PROTOCOL_SCSI_TRANSPORT 2
-
-/*
- * For flags member below
- * sg.h sg_io_hdr also has bits defined for it's flags member. However
- * none of these bits are implemented/used by bsg. The bits below are
- * allocated to not conflict with sg.h ones anyway.
- */
-#define BSG_FLAG_Q_AT_TAIL 0x10 /* default, == 0 at this bit, is Q_AT_HEAD */
-
-struct sg_io_v4 {
- __s32 guard; /* [i] 'Q' to differentiate from v3 */
- __u32 protocol; /* [i] 0 -> SCSI , .... */
- __u32 subprotocol; /* [i] 0 -> SCSI command, 1 -> SCSI task
- management function, .... */
-
- __u32 request_len; /* [i] in bytes */
- __u64 request; /* [i], [*i] {SCSI: cdb} */
- __u64 request_tag; /* [i] {SCSI: task tag (only if flagged)} */
- __u32 request_attr; /* [i] {SCSI: task attribute} */
- __u32 request_priority; /* [i] {SCSI: task priority} */
- __u32 request_extra; /* [i] {spare, for padding} */
- __u32 max_response_len; /* [i] in bytes */
- __u64 response; /* [i], [*o] {SCSI: (auto)sense data} */
-
- /* "dout_": data out (to device); "din_": data in (from device) */
- __u32 dout_iovec_count; /* [i] 0 -> "flat" dout transfer else
- dout_xfer points to array of iovec */
- __u32 dout_xfer_len; /* [i] bytes to be transferred to device */
- __u32 din_iovec_count; /* [i] 0 -> "flat" din transfer */
- __u32 din_xfer_len; /* [i] bytes to be transferred from device */
- __u64 dout_xferp; /* [i], [*i] */
- __u64 din_xferp; /* [i], [*o] */
-
- __u32 timeout; /* [i] units: millisecond */
- __u32 flags; /* [i] bit mask */
- __u64 usr_ptr; /* [i->o] unused internally */
- __u32 spare_in; /* [i] */
-
- __u32 driver_status; /* [o] 0 -> ok */
- __u32 transport_status; /* [o] 0 -> ok */
- __u32 device_status; /* [o] {SCSI: command completion status} */
- __u32 retry_delay; /* [o] {SCSI: status auxiliary information} */
- __u32 info; /* [o] additional information */
- __u32 duration; /* [o] time to complete, in milliseconds */
- __u32 response_len; /* [o] bytes of response actually written */
- __s32 din_resid; /* [o] din_xfer_len - actual_din_xfer_len */
- __s32 dout_resid; /* [o] dout_xfer_len - actual_dout_xfer_len */
- __u64 generated_tag; /* [o] {SCSI: transport generated task tag} */
- __u32 spare_out; /* [o] */
-
- __u32 padding;
-};
-
-#ifdef __KERNEL__
#if defined(CONFIG_BLK_DEV_BSG)
struct bsg_class_device {
@@ -89,6 +30,4 @@
}
#endif
-#endif /* __KERNEL__ */
-
#endif
diff --git a/include/linux/byteorder/Kbuild b/include/linux/byteorder/Kbuild
index 5896e34..e69de29 100644
--- a/include/linux/byteorder/Kbuild
+++ b/include/linux/byteorder/Kbuild
@@ -1,2 +0,0 @@
-header-y += big_endian.h
-header-y += little_endian.h
diff --git a/include/linux/byteorder/big_endian.h b/include/linux/byteorder/big_endian.h
index 3c80fd7..3920414 100644
--- a/include/linux/byteorder/big_endian.h
+++ b/include/linux/byteorder/big_endian.h
@@ -1,108 +1,7 @@
#ifndef _LINUX_BYTEORDER_BIG_ENDIAN_H
#define _LINUX_BYTEORDER_BIG_ENDIAN_H
-#ifndef __BIG_ENDIAN
-#define __BIG_ENDIAN 4321
-#endif
-#ifndef __BIG_ENDIAN_BITFIELD
-#define __BIG_ENDIAN_BITFIELD
-#endif
+#include <uapi/linux/byteorder/big_endian.h>
-#include <linux/types.h>
-#include <linux/swab.h>
-
-#define __constant_htonl(x) ((__force __be32)(__u32)(x))
-#define __constant_ntohl(x) ((__force __u32)(__be32)(x))
-#define __constant_htons(x) ((__force __be16)(__u16)(x))
-#define __constant_ntohs(x) ((__force __u16)(__be16)(x))
-#define __constant_cpu_to_le64(x) ((__force __le64)___constant_swab64((x)))
-#define __constant_le64_to_cpu(x) ___constant_swab64((__force __u64)(__le64)(x))
-#define __constant_cpu_to_le32(x) ((__force __le32)___constant_swab32((x)))
-#define __constant_le32_to_cpu(x) ___constant_swab32((__force __u32)(__le32)(x))
-#define __constant_cpu_to_le16(x) ((__force __le16)___constant_swab16((x)))
-#define __constant_le16_to_cpu(x) ___constant_swab16((__force __u16)(__le16)(x))
-#define __constant_cpu_to_be64(x) ((__force __be64)(__u64)(x))
-#define __constant_be64_to_cpu(x) ((__force __u64)(__be64)(x))
-#define __constant_cpu_to_be32(x) ((__force __be32)(__u32)(x))
-#define __constant_be32_to_cpu(x) ((__force __u32)(__be32)(x))
-#define __constant_cpu_to_be16(x) ((__force __be16)(__u16)(x))
-#define __constant_be16_to_cpu(x) ((__force __u16)(__be16)(x))
-#define __cpu_to_le64(x) ((__force __le64)__swab64((x)))
-#define __le64_to_cpu(x) __swab64((__force __u64)(__le64)(x))
-#define __cpu_to_le32(x) ((__force __le32)__swab32((x)))
-#define __le32_to_cpu(x) __swab32((__force __u32)(__le32)(x))
-#define __cpu_to_le16(x) ((__force __le16)__swab16((x)))
-#define __le16_to_cpu(x) __swab16((__force __u16)(__le16)(x))
-#define __cpu_to_be64(x) ((__force __be64)(__u64)(x))
-#define __be64_to_cpu(x) ((__force __u64)(__be64)(x))
-#define __cpu_to_be32(x) ((__force __be32)(__u32)(x))
-#define __be32_to_cpu(x) ((__force __u32)(__be32)(x))
-#define __cpu_to_be16(x) ((__force __be16)(__u16)(x))
-#define __be16_to_cpu(x) ((__force __u16)(__be16)(x))
-
-static inline __le64 __cpu_to_le64p(const __u64 *p)
-{
- return (__force __le64)__swab64p(p);
-}
-static inline __u64 __le64_to_cpup(const __le64 *p)
-{
- return __swab64p((__u64 *)p);
-}
-static inline __le32 __cpu_to_le32p(const __u32 *p)
-{
- return (__force __le32)__swab32p(p);
-}
-static inline __u32 __le32_to_cpup(const __le32 *p)
-{
- return __swab32p((__u32 *)p);
-}
-static inline __le16 __cpu_to_le16p(const __u16 *p)
-{
- return (__force __le16)__swab16p(p);
-}
-static inline __u16 __le16_to_cpup(const __le16 *p)
-{
- return __swab16p((__u16 *)p);
-}
-static inline __be64 __cpu_to_be64p(const __u64 *p)
-{
- return (__force __be64)*p;
-}
-static inline __u64 __be64_to_cpup(const __be64 *p)
-{
- return (__force __u64)*p;
-}
-static inline __be32 __cpu_to_be32p(const __u32 *p)
-{
- return (__force __be32)*p;
-}
-static inline __u32 __be32_to_cpup(const __be32 *p)
-{
- return (__force __u32)*p;
-}
-static inline __be16 __cpu_to_be16p(const __u16 *p)
-{
- return (__force __be16)*p;
-}
-static inline __u16 __be16_to_cpup(const __be16 *p)
-{
- return (__force __u16)*p;
-}
-#define __cpu_to_le64s(x) __swab64s((x))
-#define __le64_to_cpus(x) __swab64s((x))
-#define __cpu_to_le32s(x) __swab32s((x))
-#define __le32_to_cpus(x) __swab32s((x))
-#define __cpu_to_le16s(x) __swab16s((x))
-#define __le16_to_cpus(x) __swab16s((x))
-#define __cpu_to_be64s(x) do { (void)(x); } while (0)
-#define __be64_to_cpus(x) do { (void)(x); } while (0)
-#define __cpu_to_be32s(x) do { (void)(x); } while (0)
-#define __be32_to_cpus(x) do { (void)(x); } while (0)
-#define __cpu_to_be16s(x) do { (void)(x); } while (0)
-#define __be16_to_cpus(x) do { (void)(x); } while (0)
-
-#ifdef __KERNEL__
#include <linux/byteorder/generic.h>
-#endif
-
#endif /* _LINUX_BYTEORDER_BIG_ENDIAN_H */
diff --git a/include/linux/byteorder/little_endian.h b/include/linux/byteorder/little_endian.h
index 83195fb..0805737 100644
--- a/include/linux/byteorder/little_endian.h
+++ b/include/linux/byteorder/little_endian.h
@@ -1,108 +1,7 @@
#ifndef _LINUX_BYTEORDER_LITTLE_ENDIAN_H
#define _LINUX_BYTEORDER_LITTLE_ENDIAN_H
-#ifndef __LITTLE_ENDIAN
-#define __LITTLE_ENDIAN 1234
-#endif
-#ifndef __LITTLE_ENDIAN_BITFIELD
-#define __LITTLE_ENDIAN_BITFIELD
-#endif
+#include <uapi/linux/byteorder/little_endian.h>
-#include <linux/types.h>
-#include <linux/swab.h>
-
-#define __constant_htonl(x) ((__force __be32)___constant_swab32((x)))
-#define __constant_ntohl(x) ___constant_swab32((__force __be32)(x))
-#define __constant_htons(x) ((__force __be16)___constant_swab16((x)))
-#define __constant_ntohs(x) ___constant_swab16((__force __be16)(x))
-#define __constant_cpu_to_le64(x) ((__force __le64)(__u64)(x))
-#define __constant_le64_to_cpu(x) ((__force __u64)(__le64)(x))
-#define __constant_cpu_to_le32(x) ((__force __le32)(__u32)(x))
-#define __constant_le32_to_cpu(x) ((__force __u32)(__le32)(x))
-#define __constant_cpu_to_le16(x) ((__force __le16)(__u16)(x))
-#define __constant_le16_to_cpu(x) ((__force __u16)(__le16)(x))
-#define __constant_cpu_to_be64(x) ((__force __be64)___constant_swab64((x)))
-#define __constant_be64_to_cpu(x) ___constant_swab64((__force __u64)(__be64)(x))
-#define __constant_cpu_to_be32(x) ((__force __be32)___constant_swab32((x)))
-#define __constant_be32_to_cpu(x) ___constant_swab32((__force __u32)(__be32)(x))
-#define __constant_cpu_to_be16(x) ((__force __be16)___constant_swab16((x)))
-#define __constant_be16_to_cpu(x) ___constant_swab16((__force __u16)(__be16)(x))
-#define __cpu_to_le64(x) ((__force __le64)(__u64)(x))
-#define __le64_to_cpu(x) ((__force __u64)(__le64)(x))
-#define __cpu_to_le32(x) ((__force __le32)(__u32)(x))
-#define __le32_to_cpu(x) ((__force __u32)(__le32)(x))
-#define __cpu_to_le16(x) ((__force __le16)(__u16)(x))
-#define __le16_to_cpu(x) ((__force __u16)(__le16)(x))
-#define __cpu_to_be64(x) ((__force __be64)__swab64((x)))
-#define __be64_to_cpu(x) __swab64((__force __u64)(__be64)(x))
-#define __cpu_to_be32(x) ((__force __be32)__swab32((x)))
-#define __be32_to_cpu(x) __swab32((__force __u32)(__be32)(x))
-#define __cpu_to_be16(x) ((__force __be16)__swab16((x)))
-#define __be16_to_cpu(x) __swab16((__force __u16)(__be16)(x))
-
-static inline __le64 __cpu_to_le64p(const __u64 *p)
-{
- return (__force __le64)*p;
-}
-static inline __u64 __le64_to_cpup(const __le64 *p)
-{
- return (__force __u64)*p;
-}
-static inline __le32 __cpu_to_le32p(const __u32 *p)
-{
- return (__force __le32)*p;
-}
-static inline __u32 __le32_to_cpup(const __le32 *p)
-{
- return (__force __u32)*p;
-}
-static inline __le16 __cpu_to_le16p(const __u16 *p)
-{
- return (__force __le16)*p;
-}
-static inline __u16 __le16_to_cpup(const __le16 *p)
-{
- return (__force __u16)*p;
-}
-static inline __be64 __cpu_to_be64p(const __u64 *p)
-{
- return (__force __be64)__swab64p(p);
-}
-static inline __u64 __be64_to_cpup(const __be64 *p)
-{
- return __swab64p((__u64 *)p);
-}
-static inline __be32 __cpu_to_be32p(const __u32 *p)
-{
- return (__force __be32)__swab32p(p);
-}
-static inline __u32 __be32_to_cpup(const __be32 *p)
-{
- return __swab32p((__u32 *)p);
-}
-static inline __be16 __cpu_to_be16p(const __u16 *p)
-{
- return (__force __be16)__swab16p(p);
-}
-static inline __u16 __be16_to_cpup(const __be16 *p)
-{
- return __swab16p((__u16 *)p);
-}
-#define __cpu_to_le64s(x) do { (void)(x); } while (0)
-#define __le64_to_cpus(x) do { (void)(x); } while (0)
-#define __cpu_to_le32s(x) do { (void)(x); } while (0)
-#define __le32_to_cpus(x) do { (void)(x); } while (0)
-#define __cpu_to_le16s(x) do { (void)(x); } while (0)
-#define __le16_to_cpus(x) do { (void)(x); } while (0)
-#define __cpu_to_be64s(x) __swab64s((x))
-#define __be64_to_cpus(x) __swab64s((x))
-#define __cpu_to_be32s(x) __swab32s((x))
-#define __be32_to_cpus(x) __swab32s((x))
-#define __cpu_to_be16s(x) __swab16s((x))
-#define __be16_to_cpus(x) __swab16s((x))
-
-#ifdef __KERNEL__
#include <linux/byteorder/generic.h>
-#endif
-
#endif /* _LINUX_BYTEORDER_LITTLE_ENDIAN_H */
diff --git a/include/linux/capability.h b/include/linux/capability.h
index d10b7ed..98503b7 100644
--- a/include/linux/capability.h
+++ b/include/linux/capability.h
@@ -9,82 +9,11 @@
*
* ftp://www.kernel.org/pub/linux/libs/security/linux-privs/kernel-2.6/
*/
-
#ifndef _LINUX_CAPABILITY_H
#define _LINUX_CAPABILITY_H
-#include <linux/types.h>
+#include <uapi/linux/capability.h>
-struct task_struct;
-
-/* User-level do most of the mapping between kernel and user
- capabilities based on the version tag given by the kernel. The
- kernel might be somewhat backwards compatible, but don't bet on
- it. */
-
-/* Note, cap_t, is defined by POSIX (draft) to be an "opaque" pointer to
- a set of three capability sets. The transposition of 3*the
- following structure to such a composite is better handled in a user
- library since the draft standard requires the use of malloc/free
- etc.. */
-
-#define _LINUX_CAPABILITY_VERSION_1 0x19980330
-#define _LINUX_CAPABILITY_U32S_1 1
-
-#define _LINUX_CAPABILITY_VERSION_2 0x20071026 /* deprecated - use v3 */
-#define _LINUX_CAPABILITY_U32S_2 2
-
-#define _LINUX_CAPABILITY_VERSION_3 0x20080522
-#define _LINUX_CAPABILITY_U32S_3 2
-
-typedef struct __user_cap_header_struct {
- __u32 version;
- int pid;
-} __user *cap_user_header_t;
-
-typedef struct __user_cap_data_struct {
- __u32 effective;
- __u32 permitted;
- __u32 inheritable;
-} __user *cap_user_data_t;
-
-
-#define VFS_CAP_REVISION_MASK 0xFF000000
-#define VFS_CAP_REVISION_SHIFT 24
-#define VFS_CAP_FLAGS_MASK ~VFS_CAP_REVISION_MASK
-#define VFS_CAP_FLAGS_EFFECTIVE 0x000001
-
-#define VFS_CAP_REVISION_1 0x01000000
-#define VFS_CAP_U32_1 1
-#define XATTR_CAPS_SZ_1 (sizeof(__le32)*(1 + 2*VFS_CAP_U32_1))
-
-#define VFS_CAP_REVISION_2 0x02000000
-#define VFS_CAP_U32_2 2
-#define XATTR_CAPS_SZ_2 (sizeof(__le32)*(1 + 2*VFS_CAP_U32_2))
-
-#define XATTR_CAPS_SZ XATTR_CAPS_SZ_2
-#define VFS_CAP_U32 VFS_CAP_U32_2
-#define VFS_CAP_REVISION VFS_CAP_REVISION_2
-
-struct vfs_cap_data {
- __le32 magic_etc; /* Little endian */
- struct {
- __le32 permitted; /* Little endian */
- __le32 inheritable; /* Little endian */
- } data[VFS_CAP_U32];
-};
-
-#ifndef __KERNEL__
-
-/*
- * Backwardly compatible definition for source code - trapped in a
- * 32-bit world. If you find you need this, please consider using
- * libcap to untrap yourself...
- */
-#define _LINUX_CAPABILITY_VERSION _LINUX_CAPABILITY_VERSION_1
-#define _LINUX_CAPABILITY_U32S _LINUX_CAPABILITY_U32S_1
-
-#else
#define _KERNEL_CAPABILITY_VERSION _LINUX_CAPABILITY_VERSION_3
#define _KERNEL_CAPABILITY_U32S _LINUX_CAPABILITY_U32S_3
@@ -105,277 +34,6 @@
#define _USER_CAP_HEADER_SIZE (sizeof(struct __user_cap_header_struct))
#define _KERNEL_CAP_T_SIZE (sizeof(kernel_cap_t))
-#endif
-
-
-/**
- ** POSIX-draft defined capabilities.
- **/
-
-/* In a system with the [_POSIX_CHOWN_RESTRICTED] option defined, this
- overrides the restriction of changing file ownership and group
- ownership. */
-
-#define CAP_CHOWN 0
-
-/* Override all DAC access, including ACL execute access if
- [_POSIX_ACL] is defined. Excluding DAC access covered by
- CAP_LINUX_IMMUTABLE. */
-
-#define CAP_DAC_OVERRIDE 1
-
-/* Overrides all DAC restrictions regarding read and search on files
- and directories, including ACL restrictions if [_POSIX_ACL] is
- defined. Excluding DAC access covered by CAP_LINUX_IMMUTABLE. */
-
-#define CAP_DAC_READ_SEARCH 2
-
-/* Overrides all restrictions about allowed operations on files, where
- file owner ID must be equal to the user ID, except where CAP_FSETID
- is applicable. It doesn't override MAC and DAC restrictions. */
-
-#define CAP_FOWNER 3
-
-/* Overrides the following restrictions that the effective user ID
- shall match the file owner ID when setting the S_ISUID and S_ISGID
- bits on that file; that the effective group ID (or one of the
- supplementary group IDs) shall match the file owner ID when setting
- the S_ISGID bit on that file; that the S_ISUID and S_ISGID bits are
- cleared on successful return from chown(2) (not implemented). */
-
-#define CAP_FSETID 4
-
-/* Overrides the restriction that the real or effective user ID of a
- process sending a signal must match the real or effective user ID
- of the process receiving the signal. */
-
-#define CAP_KILL 5
-
-/* Allows setgid(2) manipulation */
-/* Allows setgroups(2) */
-/* Allows forged gids on socket credentials passing. */
-
-#define CAP_SETGID 6
-
-/* Allows set*uid(2) manipulation (including fsuid). */
-/* Allows forged pids on socket credentials passing. */
-
-#define CAP_SETUID 7
-
-
-/**
- ** Linux-specific capabilities
- **/
-
-/* Without VFS support for capabilities:
- * Transfer any capability in your permitted set to any pid,
- * remove any capability in your permitted set from any pid
- * With VFS support for capabilities (neither of above, but)
- * Add any capability from current's capability bounding set
- * to the current process' inheritable set
- * Allow taking bits out of capability bounding set
- * Allow modification of the securebits for a process
- */
-
-#define CAP_SETPCAP 8
-
-/* Allow modification of S_IMMUTABLE and S_APPEND file attributes */
-
-#define CAP_LINUX_IMMUTABLE 9
-
-/* Allows binding to TCP/UDP sockets below 1024 */
-/* Allows binding to ATM VCIs below 32 */
-
-#define CAP_NET_BIND_SERVICE 10
-
-/* Allow broadcasting, listen to multicast */
-
-#define CAP_NET_BROADCAST 11
-
-/* Allow interface configuration */
-/* Allow administration of IP firewall, masquerading and accounting */
-/* Allow setting debug option on sockets */
-/* Allow modification of routing tables */
-/* Allow setting arbitrary process / process group ownership on
- sockets */
-/* Allow binding to any address for transparent proxying (also via NET_RAW) */
-/* Allow setting TOS (type of service) */
-/* Allow setting promiscuous mode */
-/* Allow clearing driver statistics */
-/* Allow multicasting */
-/* Allow read/write of device-specific registers */
-/* Allow activation of ATM control sockets */
-
-#define CAP_NET_ADMIN 12
-
-/* Allow use of RAW sockets */
-/* Allow use of PACKET sockets */
-/* Allow binding to any address for transparent proxying (also via NET_ADMIN) */
-
-#define CAP_NET_RAW 13
-
-/* Allow locking of shared memory segments */
-/* Allow mlock and mlockall (which doesn't really have anything to do
- with IPC) */
-
-#define CAP_IPC_LOCK 14
-
-/* Override IPC ownership checks */
-
-#define CAP_IPC_OWNER 15
-
-/* Insert and remove kernel modules - modify kernel without limit */
-#define CAP_SYS_MODULE 16
-
-/* Allow ioperm/iopl access */
-/* Allow sending USB messages to any device via /proc/bus/usb */
-
-#define CAP_SYS_RAWIO 17
-
-/* Allow use of chroot() */
-
-#define CAP_SYS_CHROOT 18
-
-/* Allow ptrace() of any process */
-
-#define CAP_SYS_PTRACE 19
-
-/* Allow configuration of process accounting */
-
-#define CAP_SYS_PACCT 20
-
-/* Allow configuration of the secure attention key */
-/* Allow administration of the random device */
-/* Allow examination and configuration of disk quotas */
-/* Allow setting the domainname */
-/* Allow setting the hostname */
-/* Allow calling bdflush() */
-/* Allow mount() and umount(), setting up new smb connection */
-/* Allow some autofs root ioctls */
-/* Allow nfsservctl */
-/* Allow VM86_REQUEST_IRQ */
-/* Allow to read/write pci config on alpha */
-/* Allow irix_prctl on mips (setstacksize) */
-/* Allow flushing all cache on m68k (sys_cacheflush) */
-/* Allow removing semaphores */
-/* Used instead of CAP_CHOWN to "chown" IPC message queues, semaphores
- and shared memory */
-/* Allow locking/unlocking of shared memory segment */
-/* Allow turning swap on/off */
-/* Allow forged pids on socket credentials passing */
-/* Allow setting readahead and flushing buffers on block devices */
-/* Allow setting geometry in floppy driver */
-/* Allow turning DMA on/off in xd driver */
-/* Allow administration of md devices (mostly the above, but some
- extra ioctls) */
-/* Allow tuning the ide driver */
-/* Allow access to the nvram device */
-/* Allow administration of apm_bios, serial and bttv (TV) device */
-/* Allow manufacturer commands in isdn CAPI support driver */
-/* Allow reading non-standardized portions of pci configuration space */
-/* Allow DDI debug ioctl on sbpcd driver */
-/* Allow setting up serial ports */
-/* Allow sending raw qic-117 commands */
-/* Allow enabling/disabling tagged queuing on SCSI controllers and sending
- arbitrary SCSI commands */
-/* Allow setting encryption key on loopback filesystem */
-/* Allow setting zone reclaim policy */
-
-#define CAP_SYS_ADMIN 21
-
-/* Allow use of reboot() */
-
-#define CAP_SYS_BOOT 22
-
-/* Allow raising priority and setting priority on other (different
- UID) processes */
-/* Allow use of FIFO and round-robin (realtime) scheduling on own
- processes and setting the scheduling algorithm used by another
- process. */
-/* Allow setting cpu affinity on other processes */
-
-#define CAP_SYS_NICE 23
-
-/* Override resource limits. Set resource limits. */
-/* Override quota limits. */
-/* Override reserved space on ext2 filesystem */
-/* Modify data journaling mode on ext3 filesystem (uses journaling
- resources) */
-/* NOTE: ext2 honors fsuid when checking for resource overrides, so
- you can override using fsuid too */
-/* Override size restrictions on IPC message queues */
-/* Allow more than 64hz interrupts from the real-time clock */
-/* Override max number of consoles on console allocation */
-/* Override max number of keymaps */
-
-#define CAP_SYS_RESOURCE 24
-
-/* Allow manipulation of system clock */
-/* Allow irix_stime on mips */
-/* Allow setting the real-time clock */
-
-#define CAP_SYS_TIME 25
-
-/* Allow configuration of tty devices */
-/* Allow vhangup() of tty */
-
-#define CAP_SYS_TTY_CONFIG 26
-
-/* Allow the privileged aspects of mknod() */
-
-#define CAP_MKNOD 27
-
-/* Allow taking of leases on files */
-
-#define CAP_LEASE 28
-
-#define CAP_AUDIT_WRITE 29
-
-#define CAP_AUDIT_CONTROL 30
-
-#define CAP_SETFCAP 31
-
-/* Override MAC access.
- The base kernel enforces no MAC policy.
- An LSM may enforce a MAC policy, and if it does and it chooses
- to implement capability based overrides of that policy, this is
- the capability it should use to do so. */
-
-#define CAP_MAC_OVERRIDE 32
-
-/* Allow MAC configuration or state changes.
- The base kernel requires no MAC configuration.
- An LSM may enforce a MAC policy, and if it does and it chooses
- to implement capability based checks on modifications to that
- policy or the data required to maintain it, this is the
- capability it should use to do so. */
-
-#define CAP_MAC_ADMIN 33
-
-/* Allow configuring the kernel's syslog (printk behaviour) */
-
-#define CAP_SYSLOG 34
-
-/* Allow triggering something that will wake the system */
-
-#define CAP_WAKE_ALARM 35
-
-/* Allow preventing system suspends */
-
-#define CAP_BLOCK_SUSPEND 36
-
-#define CAP_LAST_CAP CAP_BLOCK_SUSPEND
-
-#define cap_valid(x) ((x) >= 0 && (x) <= CAP_LAST_CAP)
-
-/*
- * Bit location of each capability (used by user-space library and kernel)
- */
-
-#define CAP_TO_INDEX(x) ((x) >> 5) /* 1 << 5 == bits in __u32 */
-#define CAP_TO_MASK(x) (1 << ((x) & 31)) /* mask for indexed __u32 */
-
-#ifdef __KERNEL__
struct inode;
struct dentry;
@@ -557,6 +215,4 @@
/* audit system wants to get cap info from files as well */
extern int get_vfs_caps_from_disk(const struct dentry *dentry, struct cpu_vfs_cap_data *cpu_caps);
-#endif /* __KERNEL__ */
-
#endif /* !_LINUX_CAPABILITY_H */
diff --git a/include/linux/cciss_ioctl.h b/include/linux/cciss_ioctl.h
index 986493f..84b6e2d 100644
--- a/include/linux/cciss_ioctl.h
+++ b/include/linux/cciss_ioctl.h
@@ -1,91 +1,8 @@
#ifndef CCISS_IOCTLH
#define CCISS_IOCTLH
-#include <linux/types.h>
-#include <linux/ioctl.h>
-#include <linux/cciss_defs.h>
+#include <uapi/linux/cciss_ioctl.h>
-#define CCISS_IOC_MAGIC 'B'
-
-
-typedef struct _cciss_pci_info_struct
-{
- unsigned char bus;
- unsigned char dev_fn;
- unsigned short domain;
- __u32 board_id;
-} cciss_pci_info_struct;
-
-typedef struct _cciss_coalint_struct
-{
- __u32 delay;
- __u32 count;
-} cciss_coalint_struct;
-
-typedef char NodeName_type[16];
-
-typedef __u32 Heartbeat_type;
-
-#define CISS_PARSCSIU2 0x0001
-#define CISS_PARCSCIU3 0x0002
-#define CISS_FIBRE1G 0x0100
-#define CISS_FIBRE2G 0x0200
-typedef __u32 BusTypes_type;
-
-typedef char FirmwareVer_type[4];
-typedef __u32 DriverVer_type;
-
-#define MAX_KMALLOC_SIZE 128000
-
-typedef struct _IOCTL_Command_struct {
- LUNAddr_struct LUN_info;
- RequestBlock_struct Request;
- ErrorInfo_struct error_info;
- WORD buf_size; /* size in bytes of the buf */
- BYTE __user *buf;
-} IOCTL_Command_struct;
-
-typedef struct _BIG_IOCTL_Command_struct {
- LUNAddr_struct LUN_info;
- RequestBlock_struct Request;
- ErrorInfo_struct error_info;
- DWORD malloc_size; /* < MAX_KMALLOC_SIZE in cciss.c */
- DWORD buf_size; /* size in bytes of the buf */
- /* < malloc_size * MAXSGENTRIES */
- BYTE __user *buf;
-} BIG_IOCTL_Command_struct;
-
-typedef struct _LogvolInfo_struct{
- __u32 LunID;
- int num_opens; /* number of opens on the logical volume */
- int num_parts; /* number of partitions configured on logvol */
-} LogvolInfo_struct;
-
-#define CCISS_GETPCIINFO _IOR(CCISS_IOC_MAGIC, 1, cciss_pci_info_struct)
-
-#define CCISS_GETINTINFO _IOR(CCISS_IOC_MAGIC, 2, cciss_coalint_struct)
-#define CCISS_SETINTINFO _IOW(CCISS_IOC_MAGIC, 3, cciss_coalint_struct)
-
-#define CCISS_GETNODENAME _IOR(CCISS_IOC_MAGIC, 4, NodeName_type)
-#define CCISS_SETNODENAME _IOW(CCISS_IOC_MAGIC, 5, NodeName_type)
-
-#define CCISS_GETHEARTBEAT _IOR(CCISS_IOC_MAGIC, 6, Heartbeat_type)
-#define CCISS_GETBUSTYPES _IOR(CCISS_IOC_MAGIC, 7, BusTypes_type)
-#define CCISS_GETFIRMVER _IOR(CCISS_IOC_MAGIC, 8, FirmwareVer_type)
-#define CCISS_GETDRIVVER _IOR(CCISS_IOC_MAGIC, 9, DriverVer_type)
-#define CCISS_REVALIDVOLS _IO(CCISS_IOC_MAGIC, 10)
-#define CCISS_PASSTHRU _IOWR(CCISS_IOC_MAGIC, 11, IOCTL_Command_struct)
-#define CCISS_DEREGDISK _IO(CCISS_IOC_MAGIC, 12)
-
-/* no longer used... use REGNEWD instead */
-#define CCISS_REGNEWDISK _IOW(CCISS_IOC_MAGIC, 13, int)
-
-#define CCISS_REGNEWD _IO(CCISS_IOC_MAGIC, 14)
-#define CCISS_RESCANDISK _IO(CCISS_IOC_MAGIC, 16)
-#define CCISS_GETLUNINFO _IOR(CCISS_IOC_MAGIC, 17, LogvolInfo_struct)
-#define CCISS_BIG_PASSTHRU _IOWR(CCISS_IOC_MAGIC, 18, BIG_IOCTL_Command_struct)
-
-#ifdef __KERNEL__
#ifdef CONFIG_COMPAT
/* 32 bit compatible ioctl structs */
@@ -111,5 +28,4 @@
#define CCISS_BIG_PASSTHRU32 _IOWR(CCISS_IOC_MAGIC, 18, BIG_IOCTL32_Command_struct)
#endif /* CONFIG_COMPAT */
-#endif /* __KERNEL__ */
#endif
diff --git a/include/linux/cdrom.h b/include/linux/cdrom.h
index dfd7f18..8609d57 100644
--- a/include/linux/cdrom.h
+++ b/include/linux/cdrom.h
@@ -7,910 +7,12 @@
* 1997, 1998 Erik Andersen, andersee@debian.org
* 1998-2002 Jens Axboe, axboe@suse.de
*/
-
#ifndef _LINUX_CDROM_H
#define _LINUX_CDROM_H
-#include <linux/types.h>
-#include <asm/byteorder.h>
-
-/*******************************************************
- * As of Linux 2.1.x, all Linux CD-ROM application programs will use this
- * (and only this) include file. It is my hope to provide Linux with
- * a uniform interface between software accessing CD-ROMs and the various
- * device drivers that actually talk to the drives. There may still be
- * 23 different kinds of strange CD-ROM drives, but at least there will
- * now be one, and only one, Linux CD-ROM interface.
- *
- * Additionally, as of Linux 2.1.x, all Linux application programs
- * should use the O_NONBLOCK option when opening a CD-ROM device
- * for subsequent ioctl commands. This allows for neat system errors
- * like "No medium found" or "Wrong medium type" upon attempting to
- * mount or play an empty slot, mount an audio disc, or play a data disc.
- * Generally, changing an application program to support O_NONBLOCK
- * is as easy as the following:
- * - drive = open("/dev/cdrom", O_RDONLY);
- * + drive = open("/dev/cdrom", O_RDONLY | O_NONBLOCK);
- * It is worth the small change.
- *
- * Patches for many common CD programs (provided by David A. van Leeuwen)
- * can be found at: ftp://ftp.gwdg.de/pub/linux/cdrom/drivers/cm206/
- *
- *******************************************************/
-
-/* When a driver supports a certain function, but the cdrom drive we are
- * using doesn't, we will return the error EDRIVE_CANT_DO_THIS. We will
- * borrow the "Operation not supported" error from the network folks to
- * accomplish this. Maybe someday we will get a more targeted error code,
- * but this will do for now... */
-#define EDRIVE_CANT_DO_THIS EOPNOTSUPP
-
-/*******************************************************
- * The CD-ROM IOCTL commands -- these should be supported by
- * all the various cdrom drivers. For the CD-ROM ioctls, we
- * will commandeer byte 0x53, or 'S'.
- *******************************************************/
-#define CDROMPAUSE 0x5301 /* Pause Audio Operation */
-#define CDROMRESUME 0x5302 /* Resume paused Audio Operation */
-#define CDROMPLAYMSF 0x5303 /* Play Audio MSF (struct cdrom_msf) */
-#define CDROMPLAYTRKIND 0x5304 /* Play Audio Track/index
- (struct cdrom_ti) */
-#define CDROMREADTOCHDR 0x5305 /* Read TOC header
- (struct cdrom_tochdr) */
-#define CDROMREADTOCENTRY 0x5306 /* Read TOC entry
- (struct cdrom_tocentry) */
-#define CDROMSTOP 0x5307 /* Stop the cdrom drive */
-#define CDROMSTART 0x5308 /* Start the cdrom drive */
-#define CDROMEJECT 0x5309 /* Ejects the cdrom media */
-#define CDROMVOLCTRL 0x530a /* Control output volume
- (struct cdrom_volctrl) */
-#define CDROMSUBCHNL 0x530b /* Read subchannel data
- (struct cdrom_subchnl) */
-#define CDROMREADMODE2 0x530c /* Read CDROM mode 2 data (2336 Bytes)
- (struct cdrom_read) */
-#define CDROMREADMODE1 0x530d /* Read CDROM mode 1 data (2048 Bytes)
- (struct cdrom_read) */
-#define CDROMREADAUDIO 0x530e /* (struct cdrom_read_audio) */
-#define CDROMEJECT_SW 0x530f /* enable(1)/disable(0) auto-ejecting */
-#define CDROMMULTISESSION 0x5310 /* Obtain the start-of-last-session
- address of multi session disks
- (struct cdrom_multisession) */
-#define CDROM_GET_MCN 0x5311 /* Obtain the "Universal Product Code"
- if available (struct cdrom_mcn) */
-#define CDROM_GET_UPC CDROM_GET_MCN /* This one is deprecated,
- but here anyway for compatibility */
-#define CDROMRESET 0x5312 /* hard-reset the drive */
-#define CDROMVOLREAD 0x5313 /* Get the drive's volume setting
- (struct cdrom_volctrl) */
-#define CDROMREADRAW 0x5314 /* read data in raw mode (2352 Bytes)
- (struct cdrom_read) */
-/*
- * These ioctls are used only used in aztcd.c and optcd.c
- */
-#define CDROMREADCOOKED 0x5315 /* read data in cooked mode */
-#define CDROMSEEK 0x5316 /* seek msf address */
-
-/*
- * This ioctl is only used by the scsi-cd driver.
- It is for playing audio in logical block addressing mode.
- */
-#define CDROMPLAYBLK 0x5317 /* (struct cdrom_blk) */
-
-/*
- * These ioctls are only used in optcd.c
- */
-#define CDROMREADALL 0x5318 /* read all 2646 bytes */
-
-/*
- * These ioctls are (now) only in ide-cd.c for controlling
- * drive spindown time. They should be implemented in the
- * Uniform driver, via generic packet commands, GPCMD_MODE_SELECT_10,
- * GPCMD_MODE_SENSE_10 and the GPMODE_POWER_PAGE...
- * -Erik
- */
-#define CDROMGETSPINDOWN 0x531d
-#define CDROMSETSPINDOWN 0x531e
-
-/*
- * These ioctls are implemented through the uniform CD-ROM driver
- * They _will_ be adopted by all CD-ROM drivers, when all the CD-ROM
- * drivers are eventually ported to the uniform CD-ROM driver interface.
- */
-#define CDROMCLOSETRAY 0x5319 /* pendant of CDROMEJECT */
-#define CDROM_SET_OPTIONS 0x5320 /* Set behavior options */
-#define CDROM_CLEAR_OPTIONS 0x5321 /* Clear behavior options */
-#define CDROM_SELECT_SPEED 0x5322 /* Set the CD-ROM speed */
-#define CDROM_SELECT_DISC 0x5323 /* Select disc (for juke-boxes) */
-#define CDROM_MEDIA_CHANGED 0x5325 /* Check is media changed */
-#define CDROM_DRIVE_STATUS 0x5326 /* Get tray position, etc. */
-#define CDROM_DISC_STATUS 0x5327 /* Get disc type, etc. */
-#define CDROM_CHANGER_NSLOTS 0x5328 /* Get number of slots */
-#define CDROM_LOCKDOOR 0x5329 /* lock or unlock door */
-#define CDROM_DEBUG 0x5330 /* Turn debug messages on/off */
-#define CDROM_GET_CAPABILITY 0x5331 /* get capabilities */
-
-/* Note that scsi/scsi_ioctl.h also uses 0x5382 - 0x5386.
- * Future CDROM ioctls should be kept below 0x537F
- */
-
-/* This ioctl is only used by sbpcd at the moment */
-#define CDROMAUDIOBUFSIZ 0x5382 /* set the audio buffer size */
- /* conflict with SCSI_IOCTL_GET_IDLUN */
-
-/* DVD-ROM Specific ioctls */
-#define DVD_READ_STRUCT 0x5390 /* Read structure */
-#define DVD_WRITE_STRUCT 0x5391 /* Write structure */
-#define DVD_AUTH 0x5392 /* Authentication */
-
-#define CDROM_SEND_PACKET 0x5393 /* send a packet to the drive */
-#define CDROM_NEXT_WRITABLE 0x5394 /* get next writable block */
-#define CDROM_LAST_WRITTEN 0x5395 /* get last block written on disc */
-
-/*******************************************************
- * CDROM IOCTL structures
- *******************************************************/
-
-/* Address in MSF format */
-struct cdrom_msf0
-{
- __u8 minute;
- __u8 second;
- __u8 frame;
-};
-
-/* Address in either MSF or logical format */
-union cdrom_addr
-{
- struct cdrom_msf0 msf;
- int lba;
-};
-
-/* This struct is used by the CDROMPLAYMSF ioctl */
-struct cdrom_msf
-{
- __u8 cdmsf_min0; /* start minute */
- __u8 cdmsf_sec0; /* start second */
- __u8 cdmsf_frame0; /* start frame */
- __u8 cdmsf_min1; /* end minute */
- __u8 cdmsf_sec1; /* end second */
- __u8 cdmsf_frame1; /* end frame */
-};
-
-/* This struct is used by the CDROMPLAYTRKIND ioctl */
-struct cdrom_ti
-{
- __u8 cdti_trk0; /* start track */
- __u8 cdti_ind0; /* start index */
- __u8 cdti_trk1; /* end track */
- __u8 cdti_ind1; /* end index */
-};
-
-/* This struct is used by the CDROMREADTOCHDR ioctl */
-struct cdrom_tochdr
-{
- __u8 cdth_trk0; /* start track */
- __u8 cdth_trk1; /* end track */
-};
-
-/* This struct is used by the CDROMVOLCTRL and CDROMVOLREAD ioctls */
-struct cdrom_volctrl
-{
- __u8 channel0;
- __u8 channel1;
- __u8 channel2;
- __u8 channel3;
-};
-
-/* This struct is used by the CDROMSUBCHNL ioctl */
-struct cdrom_subchnl
-{
- __u8 cdsc_format;
- __u8 cdsc_audiostatus;
- __u8 cdsc_adr: 4;
- __u8 cdsc_ctrl: 4;
- __u8 cdsc_trk;
- __u8 cdsc_ind;
- union cdrom_addr cdsc_absaddr;
- union cdrom_addr cdsc_reladdr;
-};
-
-
-/* This struct is used by the CDROMREADTOCENTRY ioctl */
-struct cdrom_tocentry
-{
- __u8 cdte_track;
- __u8 cdte_adr :4;
- __u8 cdte_ctrl :4;
- __u8 cdte_format;
- union cdrom_addr cdte_addr;
- __u8 cdte_datamode;
-};
-
-/* This struct is used by the CDROMREADMODE1, and CDROMREADMODE2 ioctls */
-struct cdrom_read
-{
- int cdread_lba;
- char *cdread_bufaddr;
- int cdread_buflen;
-};
-
-/* This struct is used by the CDROMREADAUDIO ioctl */
-struct cdrom_read_audio
-{
- union cdrom_addr addr; /* frame address */
- __u8 addr_format; /* CDROM_LBA or CDROM_MSF */
- int nframes; /* number of 2352-byte-frames to read at once */
- __u8 __user *buf; /* frame buffer (size: nframes*2352 bytes) */
-};
-
-/* This struct is used with the CDROMMULTISESSION ioctl */
-struct cdrom_multisession
-{
- union cdrom_addr addr; /* frame address: start-of-last-session
- (not the new "frame 16"!). Only valid
- if the "xa_flag" is true. */
- __u8 xa_flag; /* 1: "is XA disk" */
- __u8 addr_format; /* CDROM_LBA or CDROM_MSF */
-};
-
-/* This struct is used with the CDROM_GET_MCN ioctl.
- * Very few audio discs actually have Universal Product Code information,
- * which should just be the Medium Catalog Number on the box. Also note
- * that the way the codeis written on CD is _not_ uniform across all discs!
- */
-struct cdrom_mcn
-{
- __u8 medium_catalog_number[14]; /* 13 ASCII digits, null-terminated */
-};
-
-/* This is used by the CDROMPLAYBLK ioctl */
-struct cdrom_blk
-{
- unsigned from;
- unsigned short len;
-};
-
-#define CDROM_PACKET_SIZE 12
-
-#define CGC_DATA_UNKNOWN 0
-#define CGC_DATA_WRITE 1
-#define CGC_DATA_READ 2
-#define CGC_DATA_NONE 3
-
-/* for CDROM_PACKET_COMMAND ioctl */
-struct cdrom_generic_command
-{
- unsigned char cmd[CDROM_PACKET_SIZE];
- unsigned char __user *buffer;
- unsigned int buflen;
- int stat;
- struct request_sense __user *sense;
- unsigned char data_direction;
- int quiet;
- int timeout;
- void __user *reserved[1]; /* unused, actually */
-};
-
-/*
- * A CD-ROM physical sector size is 2048, 2052, 2056, 2324, 2332, 2336,
- * 2340, or 2352 bytes long.
-
-* Sector types of the standard CD-ROM data formats:
- *
- * format sector type user data size (bytes)
- * -----------------------------------------------------------------------------
- * 1 (Red Book) CD-DA 2352 (CD_FRAMESIZE_RAW)
- * 2 (Yellow Book) Mode1 Form1 2048 (CD_FRAMESIZE)
- * 3 (Yellow Book) Mode1 Form2 2336 (CD_FRAMESIZE_RAW0)
- * 4 (Green Book) Mode2 Form1 2048 (CD_FRAMESIZE)
- * 5 (Green Book) Mode2 Form2 2328 (2324+4 spare bytes)
- *
- *
- * The layout of the standard CD-ROM data formats:
- * -----------------------------------------------------------------------------
- * - audio (red): | audio_sample_bytes |
- * | 2352 |
- *
- * - data (yellow, mode1): | sync - head - data - EDC - zero - ECC |
- * | 12 - 4 - 2048 - 4 - 8 - 276 |
- *
- * - data (yellow, mode2): | sync - head - data |
- * | 12 - 4 - 2336 |
- *
- * - XA data (green, mode2 form1): | sync - head - sub - data - EDC - ECC |
- * | 12 - 4 - 8 - 2048 - 4 - 276 |
- *
- * - XA data (green, mode2 form2): | sync - head - sub - data - Spare |
- * | 12 - 4 - 8 - 2324 - 4 |
- *
- */
-
-/* Some generally useful CD-ROM information -- mostly based on the above */
-#define CD_MINS 74 /* max. minutes per CD, not really a limit */
-#define CD_SECS 60 /* seconds per minute */
-#define CD_FRAMES 75 /* frames per second */
-#define CD_SYNC_SIZE 12 /* 12 sync bytes per raw data frame */
-#define CD_MSF_OFFSET 150 /* MSF numbering offset of first frame */
-#define CD_CHUNK_SIZE 24 /* lowest-level "data bytes piece" */
-#define CD_NUM_OF_CHUNKS 98 /* chunks per frame */
-#define CD_FRAMESIZE_SUB 96 /* subchannel data "frame" size */
-#define CD_HEAD_SIZE 4 /* header (address) bytes per raw data frame */
-#define CD_SUBHEAD_SIZE 8 /* subheader bytes per raw XA data frame */
-#define CD_EDC_SIZE 4 /* bytes EDC per most raw data frame types */
-#define CD_ZERO_SIZE 8 /* bytes zero per yellow book mode 1 frame */
-#define CD_ECC_SIZE 276 /* bytes ECC per most raw data frame types */
-#define CD_FRAMESIZE 2048 /* bytes per frame, "cooked" mode */
-#define CD_FRAMESIZE_RAW 2352 /* bytes per frame, "raw" mode */
-#define CD_FRAMESIZE_RAWER 2646 /* The maximum possible returned bytes */
-/* most drives don't deliver everything: */
-#define CD_FRAMESIZE_RAW1 (CD_FRAMESIZE_RAW-CD_SYNC_SIZE) /*2340*/
-#define CD_FRAMESIZE_RAW0 (CD_FRAMESIZE_RAW-CD_SYNC_SIZE-CD_HEAD_SIZE) /*2336*/
-
-#define CD_XA_HEAD (CD_HEAD_SIZE+CD_SUBHEAD_SIZE) /* "before data" part of raw XA frame */
-#define CD_XA_TAIL (CD_EDC_SIZE+CD_ECC_SIZE) /* "after data" part of raw XA frame */
-#define CD_XA_SYNC_HEAD (CD_SYNC_SIZE+CD_XA_HEAD) /* sync bytes + header of XA frame */
-
-/* CD-ROM address types (cdrom_tocentry.cdte_format) */
-#define CDROM_LBA 0x01 /* "logical block": first frame is #0 */
-#define CDROM_MSF 0x02 /* "minute-second-frame": binary, not bcd here! */
-
-/* bit to tell whether track is data or audio (cdrom_tocentry.cdte_ctrl) */
-#define CDROM_DATA_TRACK 0x04
-
-/* The leadout track is always 0xAA, regardless of # of tracks on disc */
-#define CDROM_LEADOUT 0xAA
-
-/* audio states (from SCSI-2, but seen with other drives, too) */
-#define CDROM_AUDIO_INVALID 0x00 /* audio status not supported */
-#define CDROM_AUDIO_PLAY 0x11 /* audio play operation in progress */
-#define CDROM_AUDIO_PAUSED 0x12 /* audio play operation paused */
-#define CDROM_AUDIO_COMPLETED 0x13 /* audio play successfully completed */
-#define CDROM_AUDIO_ERROR 0x14 /* audio play stopped due to error */
-#define CDROM_AUDIO_NO_STATUS 0x15 /* no current audio status to return */
-
-/* capability flags used with the uniform CD-ROM driver */
-#define CDC_CLOSE_TRAY 0x1 /* caddy systems _can't_ close */
-#define CDC_OPEN_TRAY 0x2 /* but _can_ eject. */
-#define CDC_LOCK 0x4 /* disable manual eject */
-#define CDC_SELECT_SPEED 0x8 /* programmable speed */
-#define CDC_SELECT_DISC 0x10 /* select disc from juke-box */
-#define CDC_MULTI_SESSION 0x20 /* read sessions>1 */
-#define CDC_MCN 0x40 /* Medium Catalog Number */
-#define CDC_MEDIA_CHANGED 0x80 /* media changed */
-#define CDC_PLAY_AUDIO 0x100 /* audio functions */
-#define CDC_RESET 0x200 /* hard reset device */
-#define CDC_DRIVE_STATUS 0x800 /* driver implements drive status */
-#define CDC_GENERIC_PACKET 0x1000 /* driver implements generic packets */
-#define CDC_CD_R 0x2000 /* drive is a CD-R */
-#define CDC_CD_RW 0x4000 /* drive is a CD-RW */
-#define CDC_DVD 0x8000 /* drive is a DVD */
-#define CDC_DVD_R 0x10000 /* drive can write DVD-R */
-#define CDC_DVD_RAM 0x20000 /* drive can write DVD-RAM */
-#define CDC_MO_DRIVE 0x40000 /* drive is an MO device */
-#define CDC_MRW 0x80000 /* drive can read MRW */
-#define CDC_MRW_W 0x100000 /* drive can write MRW */
-#define CDC_RAM 0x200000 /* ok to open for WRITE */
-
-/* drive status possibilities returned by CDROM_DRIVE_STATUS ioctl */
-#define CDS_NO_INFO 0 /* if not implemented */
-#define CDS_NO_DISC 1
-#define CDS_TRAY_OPEN 2
-#define CDS_DRIVE_NOT_READY 3
-#define CDS_DISC_OK 4
-
-/* return values for the CDROM_DISC_STATUS ioctl */
-/* can also return CDS_NO_[INFO|DISC], from above */
-#define CDS_AUDIO 100
-#define CDS_DATA_1 101
-#define CDS_DATA_2 102
-#define CDS_XA_2_1 103
-#define CDS_XA_2_2 104
-#define CDS_MIXED 105
-
-/* User-configurable behavior options for the uniform CD-ROM driver */
-#define CDO_AUTO_CLOSE 0x1 /* close tray on first open() */
-#define CDO_AUTO_EJECT 0x2 /* open tray on last release() */
-#define CDO_USE_FFLAGS 0x4 /* use O_NONBLOCK information on open */
-#define CDO_LOCK 0x8 /* lock tray on open files */
-#define CDO_CHECK_TYPE 0x10 /* check type on open for data */
-
-/* Special codes used when specifying changer slots. */
-#define CDSL_NONE (INT_MAX-1)
-#define CDSL_CURRENT INT_MAX
-
-/* For partition based multisession access. IDE can handle 64 partitions
- * per drive - SCSI CD-ROM's use minors to differentiate between the
- * various drives, so we can't do multisessions the same way there.
- * Use the -o session=x option to mount on them.
- */
-#define CD_PART_MAX 64
-#define CD_PART_MASK (CD_PART_MAX - 1)
-
-/*********************************************************************
- * Generic Packet commands, MMC commands, and such
- *********************************************************************/
-
- /* The generic packet command opcodes for CD/DVD Logical Units,
- * From Table 57 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */
-#define GPCMD_BLANK 0xa1
-#define GPCMD_CLOSE_TRACK 0x5b
-#define GPCMD_FLUSH_CACHE 0x35
-#define GPCMD_FORMAT_UNIT 0x04
-#define GPCMD_GET_CONFIGURATION 0x46
-#define GPCMD_GET_EVENT_STATUS_NOTIFICATION 0x4a
-#define GPCMD_GET_PERFORMANCE 0xac
-#define GPCMD_INQUIRY 0x12
-#define GPCMD_LOAD_UNLOAD 0xa6
-#define GPCMD_MECHANISM_STATUS 0xbd
-#define GPCMD_MODE_SELECT_10 0x55
-#define GPCMD_MODE_SENSE_10 0x5a
-#define GPCMD_PAUSE_RESUME 0x4b
-#define GPCMD_PLAY_AUDIO_10 0x45
-#define GPCMD_PLAY_AUDIO_MSF 0x47
-#define GPCMD_PLAY_AUDIO_TI 0x48
-#define GPCMD_PLAY_CD 0xbc
-#define GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL 0x1e
-#define GPCMD_READ_10 0x28
-#define GPCMD_READ_12 0xa8
-#define GPCMD_READ_BUFFER 0x3c
-#define GPCMD_READ_BUFFER_CAPACITY 0x5c
-#define GPCMD_READ_CDVD_CAPACITY 0x25
-#define GPCMD_READ_CD 0xbe
-#define GPCMD_READ_CD_MSF 0xb9
-#define GPCMD_READ_DISC_INFO 0x51
-#define GPCMD_READ_DVD_STRUCTURE 0xad
-#define GPCMD_READ_FORMAT_CAPACITIES 0x23
-#define GPCMD_READ_HEADER 0x44
-#define GPCMD_READ_TRACK_RZONE_INFO 0x52
-#define GPCMD_READ_SUBCHANNEL 0x42
-#define GPCMD_READ_TOC_PMA_ATIP 0x43
-#define GPCMD_REPAIR_RZONE_TRACK 0x58
-#define GPCMD_REPORT_KEY 0xa4
-#define GPCMD_REQUEST_SENSE 0x03
-#define GPCMD_RESERVE_RZONE_TRACK 0x53
-#define GPCMD_SEND_CUE_SHEET 0x5d
-#define GPCMD_SCAN 0xba
-#define GPCMD_SEEK 0x2b
-#define GPCMD_SEND_DVD_STRUCTURE 0xbf
-#define GPCMD_SEND_EVENT 0xa2
-#define GPCMD_SEND_KEY 0xa3
-#define GPCMD_SEND_OPC 0x54
-#define GPCMD_SET_READ_AHEAD 0xa7
-#define GPCMD_SET_STREAMING 0xb6
-#define GPCMD_START_STOP_UNIT 0x1b
-#define GPCMD_STOP_PLAY_SCAN 0x4e
-#define GPCMD_TEST_UNIT_READY 0x00
-#define GPCMD_VERIFY_10 0x2f
-#define GPCMD_WRITE_10 0x2a
-#define GPCMD_WRITE_12 0xaa
-#define GPCMD_WRITE_AND_VERIFY_10 0x2e
-#define GPCMD_WRITE_BUFFER 0x3b
-/* This is listed as optional in ATAPI 2.6, but is (curiously)
- * missing from Mt. Fuji, Table 57. It _is_ mentioned in Mt. Fuji
- * Table 377 as an MMC command for SCSi devices though... Most ATAPI
- * drives support it. */
-#define GPCMD_SET_SPEED 0xbb
-/* This seems to be a SCSI specific CD-ROM opcode
- * to play data at track/index */
-#define GPCMD_PLAYAUDIO_TI 0x48
-/*
- * From MS Media Status Notification Support Specification. For
- * older drives only.
- */
-#define GPCMD_GET_MEDIA_STATUS 0xda
-
-/* Mode page codes for mode sense/set */
-#define GPMODE_VENDOR_PAGE 0x00
-#define GPMODE_R_W_ERROR_PAGE 0x01
-#define GPMODE_WRITE_PARMS_PAGE 0x05
-#define GPMODE_WCACHING_PAGE 0x08
-#define GPMODE_AUDIO_CTL_PAGE 0x0e
-#define GPMODE_POWER_PAGE 0x1a
-#define GPMODE_FAULT_FAIL_PAGE 0x1c
-#define GPMODE_TO_PROTECT_PAGE 0x1d
-#define GPMODE_CAPABILITIES_PAGE 0x2a
-#define GPMODE_ALL_PAGES 0x3f
-/* Not in Mt. Fuji, but in ATAPI 2.6 -- deprecated now in favor
- * of MODE_SENSE_POWER_PAGE */
-#define GPMODE_CDROM_PAGE 0x0d
-
-
-
-/* DVD struct types */
-#define DVD_STRUCT_PHYSICAL 0x00
-#define DVD_STRUCT_COPYRIGHT 0x01
-#define DVD_STRUCT_DISCKEY 0x02
-#define DVD_STRUCT_BCA 0x03
-#define DVD_STRUCT_MANUFACT 0x04
-
-struct dvd_layer {
- __u8 book_version : 4;
- __u8 book_type : 4;
- __u8 min_rate : 4;
- __u8 disc_size : 4;
- __u8 layer_type : 4;
- __u8 track_path : 1;
- __u8 nlayers : 2;
- __u8 track_density : 4;
- __u8 linear_density : 4;
- __u8 bca : 1;
- __u32 start_sector;
- __u32 end_sector;
- __u32 end_sector_l0;
-};
-
-#define DVD_LAYERS 4
-
-struct dvd_physical {
- __u8 type;
- __u8 layer_num;
- struct dvd_layer layer[DVD_LAYERS];
-};
-
-struct dvd_copyright {
- __u8 type;
-
- __u8 layer_num;
- __u8 cpst;
- __u8 rmi;
-};
-
-struct dvd_disckey {
- __u8 type;
-
- unsigned agid : 2;
- __u8 value[2048];
-};
-
-struct dvd_bca {
- __u8 type;
-
- int len;
- __u8 value[188];
-};
-
-struct dvd_manufact {
- __u8 type;
-
- __u8 layer_num;
- int len;
- __u8 value[2048];
-};
-
-typedef union {
- __u8 type;
-
- struct dvd_physical physical;
- struct dvd_copyright copyright;
- struct dvd_disckey disckey;
- struct dvd_bca bca;
- struct dvd_manufact manufact;
-} dvd_struct;
-
-/*
- * DVD authentication ioctl
- */
-
-/* Authentication states */
-#define DVD_LU_SEND_AGID 0
-#define DVD_HOST_SEND_CHALLENGE 1
-#define DVD_LU_SEND_KEY1 2
-#define DVD_LU_SEND_CHALLENGE 3
-#define DVD_HOST_SEND_KEY2 4
-
-/* Termination states */
-#define DVD_AUTH_ESTABLISHED 5
-#define DVD_AUTH_FAILURE 6
-
-/* Other functions */
-#define DVD_LU_SEND_TITLE_KEY 7
-#define DVD_LU_SEND_ASF 8
-#define DVD_INVALIDATE_AGID 9
-#define DVD_LU_SEND_RPC_STATE 10
-#define DVD_HOST_SEND_RPC_STATE 11
-
-/* State data */
-typedef __u8 dvd_key[5]; /* 40-bit value, MSB is first elem. */
-typedef __u8 dvd_challenge[10]; /* 80-bit value, MSB is first elem. */
-
-struct dvd_lu_send_agid {
- __u8 type;
- unsigned agid : 2;
-};
-
-struct dvd_host_send_challenge {
- __u8 type;
- unsigned agid : 2;
-
- dvd_challenge chal;
-};
-
-struct dvd_send_key {
- __u8 type;
- unsigned agid : 2;
-
- dvd_key key;
-};
-
-struct dvd_lu_send_challenge {
- __u8 type;
- unsigned agid : 2;
-
- dvd_challenge chal;
-};
-
-#define DVD_CPM_NO_COPYRIGHT 0
-#define DVD_CPM_COPYRIGHTED 1
-
-#define DVD_CP_SEC_NONE 0
-#define DVD_CP_SEC_EXIST 1
-
-#define DVD_CGMS_UNRESTRICTED 0
-#define DVD_CGMS_SINGLE 2
-#define DVD_CGMS_RESTRICTED 3
-
-struct dvd_lu_send_title_key {
- __u8 type;
- unsigned agid : 2;
-
- dvd_key title_key;
- int lba;
- unsigned cpm : 1;
- unsigned cp_sec : 1;
- unsigned cgms : 2;
-};
-
-struct dvd_lu_send_asf {
- __u8 type;
- unsigned agid : 2;
-
- unsigned asf : 1;
-};
-
-struct dvd_host_send_rpcstate {
- __u8 type;
- __u8 pdrc;
-};
-
-struct dvd_lu_send_rpcstate {
- __u8 type : 2;
- __u8 vra : 3;
- __u8 ucca : 3;
- __u8 region_mask;
- __u8 rpc_scheme;
-};
-
-typedef union {
- __u8 type;
-
- struct dvd_lu_send_agid lsa;
- struct dvd_host_send_challenge hsc;
- struct dvd_send_key lsk;
- struct dvd_lu_send_challenge lsc;
- struct dvd_send_key hsk;
- struct dvd_lu_send_title_key lstk;
- struct dvd_lu_send_asf lsasf;
- struct dvd_host_send_rpcstate hrpcs;
- struct dvd_lu_send_rpcstate lrpcs;
-} dvd_authinfo;
-
-struct request_sense {
-#if defined(__BIG_ENDIAN_BITFIELD)
- __u8 valid : 1;
- __u8 error_code : 7;
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
- __u8 error_code : 7;
- __u8 valid : 1;
-#endif
- __u8 segment_number;
-#if defined(__BIG_ENDIAN_BITFIELD)
- __u8 reserved1 : 2;
- __u8 ili : 1;
- __u8 reserved2 : 1;
- __u8 sense_key : 4;
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
- __u8 sense_key : 4;
- __u8 reserved2 : 1;
- __u8 ili : 1;
- __u8 reserved1 : 2;
-#endif
- __u8 information[4];
- __u8 add_sense_len;
- __u8 command_info[4];
- __u8 asc;
- __u8 ascq;
- __u8 fruc;
- __u8 sks[3];
- __u8 asb[46];
-};
-
-/*
- * feature profile
- */
-#define CDF_RWRT 0x0020 /* "Random Writable" */
-#define CDF_HWDM 0x0024 /* "Hardware Defect Management" */
-#define CDF_MRW 0x0028
-
-/*
- * media status bits
- */
-#define CDM_MRW_NOTMRW 0
-#define CDM_MRW_BGFORMAT_INACTIVE 1
-#define CDM_MRW_BGFORMAT_ACTIVE 2
-#define CDM_MRW_BGFORMAT_COMPLETE 3
-
-/*
- * mrw address spaces
- */
-#define MRW_LBA_DMA 0
-#define MRW_LBA_GAA 1
-
-/*
- * mrw mode pages (first is deprecated) -- probed at init time and
- * cdi->mrw_mode_page is set
- */
-#define MRW_MODE_PC_PRE1 0x2c
-#define MRW_MODE_PC 0x03
-
-struct mrw_feature_desc {
- __be16 feature_code;
-#if defined(__BIG_ENDIAN_BITFIELD)
- __u8 reserved1 : 2;
- __u8 feature_version : 4;
- __u8 persistent : 1;
- __u8 curr : 1;
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
- __u8 curr : 1;
- __u8 persistent : 1;
- __u8 feature_version : 4;
- __u8 reserved1 : 2;
-#endif
- __u8 add_len;
-#if defined(__BIG_ENDIAN_BITFIELD)
- __u8 reserved2 : 7;
- __u8 write : 1;
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
- __u8 write : 1;
- __u8 reserved2 : 7;
-#endif
- __u8 reserved3;
- __u8 reserved4;
- __u8 reserved5;
-};
-
-/* cf. mmc4r02g.pdf 5.3.10 Random Writable Feature (0020h) pg 197 of 635 */
-struct rwrt_feature_desc {
- __be16 feature_code;
-#if defined(__BIG_ENDIAN_BITFIELD)
- __u8 reserved1 : 2;
- __u8 feature_version : 4;
- __u8 persistent : 1;
- __u8 curr : 1;
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
- __u8 curr : 1;
- __u8 persistent : 1;
- __u8 feature_version : 4;
- __u8 reserved1 : 2;
-#endif
- __u8 add_len;
- __u32 last_lba;
- __u32 block_size;
- __u16 blocking;
-#if defined(__BIG_ENDIAN_BITFIELD)
- __u8 reserved2 : 7;
- __u8 page_present : 1;
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
- __u8 page_present : 1;
- __u8 reserved2 : 7;
-#endif
- __u8 reserved3;
-};
-
-typedef struct {
- __be16 disc_information_length;
-#if defined(__BIG_ENDIAN_BITFIELD)
- __u8 reserved1 : 3;
- __u8 erasable : 1;
- __u8 border_status : 2;
- __u8 disc_status : 2;
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
- __u8 disc_status : 2;
- __u8 border_status : 2;
- __u8 erasable : 1;
- __u8 reserved1 : 3;
-#else
-#error "Please fix <asm/byteorder.h>"
-#endif
- __u8 n_first_track;
- __u8 n_sessions_lsb;
- __u8 first_track_lsb;
- __u8 last_track_lsb;
-#if defined(__BIG_ENDIAN_BITFIELD)
- __u8 did_v : 1;
- __u8 dbc_v : 1;
- __u8 uru : 1;
- __u8 reserved2 : 2;
- __u8 dbit : 1;
- __u8 mrw_status : 2;
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
- __u8 mrw_status : 2;
- __u8 dbit : 1;
- __u8 reserved2 : 2;
- __u8 uru : 1;
- __u8 dbc_v : 1;
- __u8 did_v : 1;
-#endif
- __u8 disc_type;
- __u8 n_sessions_msb;
- __u8 first_track_msb;
- __u8 last_track_msb;
- __u32 disc_id;
- __u32 lead_in;
- __u32 lead_out;
- __u8 disc_bar_code[8];
- __u8 reserved3;
- __u8 n_opc;
-} disc_information;
-
-typedef struct {
- __be16 track_information_length;
- __u8 track_lsb;
- __u8 session_lsb;
- __u8 reserved1;
-#if defined(__BIG_ENDIAN_BITFIELD)
- __u8 reserved2 : 2;
- __u8 damage : 1;
- __u8 copy : 1;
- __u8 track_mode : 4;
- __u8 rt : 1;
- __u8 blank : 1;
- __u8 packet : 1;
- __u8 fp : 1;
- __u8 data_mode : 4;
- __u8 reserved3 : 6;
- __u8 lra_v : 1;
- __u8 nwa_v : 1;
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
- __u8 track_mode : 4;
- __u8 copy : 1;
- __u8 damage : 1;
- __u8 reserved2 : 2;
- __u8 data_mode : 4;
- __u8 fp : 1;
- __u8 packet : 1;
- __u8 blank : 1;
- __u8 rt : 1;
- __u8 nwa_v : 1;
- __u8 lra_v : 1;
- __u8 reserved3 : 6;
-#endif
- __be32 track_start;
- __be32 next_writable;
- __be32 free_blocks;
- __be32 fixed_packet_size;
- __be32 track_size;
- __be32 last_rec_address;
-} track_information;
-
-struct feature_header {
- __u32 data_len;
- __u8 reserved1;
- __u8 reserved2;
- __u16 curr_profile;
-};
-
-struct mode_page_header {
- __be16 mode_data_length;
- __u8 medium_type;
- __u8 reserved1;
- __u8 reserved2;
- __u8 reserved3;
- __be16 desc_length;
-};
-
-#ifdef __KERNEL__
#include <linux/fs.h> /* not really needed, later.. */
#include <linux/list.h>
+#include <uapi/linux/cdrom.h>
struct packet_command
{
@@ -1209,6 +311,4 @@
{
return (((m * CD_SECS) + s) * CD_FRAMES + f) - CD_MSF_OFFSET;
}
-#endif /* End of kernel only stuff */
-
#endif /* _LINUX_CDROM_H */
diff --git a/include/linux/cm4000_cs.h b/include/linux/cm4000_cs.h
index 3c4aac4..88bee3a 100644
--- a/include/linux/cm4000_cs.h
+++ b/include/linux/cm4000_cs.h
@@ -1,68 +1,10 @@
#ifndef _CM4000_H_
#define _CM4000_H_
-#include <linux/types.h>
+#include <uapi/linux/cm4000_cs.h>
-#define MAX_ATR 33
-
-#define CM4000_MAX_DEV 4
-
-/* those two structures are passed via ioctl() from/to userspace. They are
- * used by existing userspace programs, so I kepth the awkward "bIFSD" naming
- * not to break compilation of userspace apps. -HW */
-
-typedef struct atreq {
- __s32 atr_len;
- unsigned char atr[64];
- __s32 power_act;
- unsigned char bIFSD;
- unsigned char bIFSC;
-} atreq_t;
-
-
-/* what is particularly stupid in the original driver is the arch-dependent
- * member sizes. This leads to CONFIG_COMPAT breakage, since 32bit userspace
- * will lay out the structure members differently than the 64bit kernel.
- *
- * I've changed "ptsreq.protocol" from "unsigned long" to "__u32".
- * On 32bit this will make no difference. With 64bit kernels, it will make
- * 32bit apps work, too.
- */
-
-typedef struct ptsreq {
- __u32 protocol; /*T=0: 2^0, T=1: 2^1*/
- unsigned char flags;
- unsigned char pts1;
- unsigned char pts2;
- unsigned char pts3;
-} ptsreq_t;
-
-#define CM_IOC_MAGIC 'c'
-#define CM_IOC_MAXNR 255
-
-#define CM_IOCGSTATUS _IOR (CM_IOC_MAGIC, 0, unsigned char *)
-#define CM_IOCGATR _IOWR(CM_IOC_MAGIC, 1, atreq_t *)
-#define CM_IOCSPTS _IOW (CM_IOC_MAGIC, 2, ptsreq_t *)
-#define CM_IOCSRDR _IO (CM_IOC_MAGIC, 3)
-#define CM_IOCARDOFF _IO (CM_IOC_MAGIC, 4)
-
-#define CM_IOSDBGLVL _IOW(CM_IOC_MAGIC, 250, int*)
-
-/* card and device states */
-#define CM_CARD_INSERTED 0x01
-#define CM_CARD_POWERED 0x02
-#define CM_ATR_PRESENT 0x04
-#define CM_ATR_VALID 0x08
-#define CM_STATE_VALID 0x0f
-/* extra info only from CM4000 */
-#define CM_NO_READER 0x10
-#define CM_BAD_CARD 0x20
-
-
-#ifdef __KERNEL__
#define DEVICE_NAME "cmm"
#define MODULE_NAME "cm4000_cs"
-#endif /* __KERNEL__ */
#endif /* _CM4000_H_ */
diff --git a/include/linux/cn_proc.h b/include/linux/cn_proc.h
index d03612b..2c1bc1e 100644
--- a/include/linux/cn_proc.h
+++ b/include/linux/cn_proc.h
@@ -14,111 +14,11 @@
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
*/
-
#ifndef CN_PROC_H
#define CN_PROC_H
-#include <linux/types.h>
+#include <uapi/linux/cn_proc.h>
-/*
- * Userspace sends this enum to register with the kernel that it is listening
- * for events on the connector.
- */
-enum proc_cn_mcast_op {
- PROC_CN_MCAST_LISTEN = 1,
- PROC_CN_MCAST_IGNORE = 2
-};
-
-/*
- * From the user's point of view, the process
- * ID is the thread group ID and thread ID is the internal
- * kernel "pid". So, fields are assigned as follow:
- *
- * In user space - In kernel space
- *
- * parent process ID = parent->tgid
- * parent thread ID = parent->pid
- * child process ID = child->tgid
- * child thread ID = child->pid
- */
-
-struct proc_event {
- enum what {
- /* Use successive bits so the enums can be used to record
- * sets of events as well
- */
- PROC_EVENT_NONE = 0x00000000,
- PROC_EVENT_FORK = 0x00000001,
- PROC_EVENT_EXEC = 0x00000002,
- PROC_EVENT_UID = 0x00000004,
- PROC_EVENT_GID = 0x00000040,
- PROC_EVENT_SID = 0x00000080,
- PROC_EVENT_PTRACE = 0x00000100,
- PROC_EVENT_COMM = 0x00000200,
- /* "next" should be 0x00000400 */
- /* "last" is the last process event: exit */
- PROC_EVENT_EXIT = 0x80000000
- } what;
- __u32 cpu;
- __u64 __attribute__((aligned(8))) timestamp_ns;
- /* Number of nano seconds since system boot */
- union { /* must be last field of proc_event struct */
- struct {
- __u32 err;
- } ack;
-
- struct fork_proc_event {
- __kernel_pid_t parent_pid;
- __kernel_pid_t parent_tgid;
- __kernel_pid_t child_pid;
- __kernel_pid_t child_tgid;
- } fork;
-
- struct exec_proc_event {
- __kernel_pid_t process_pid;
- __kernel_pid_t process_tgid;
- } exec;
-
- struct id_proc_event {
- __kernel_pid_t process_pid;
- __kernel_pid_t process_tgid;
- union {
- __u32 ruid; /* task uid */
- __u32 rgid; /* task gid */
- } r;
- union {
- __u32 euid;
- __u32 egid;
- } e;
- } id;
-
- struct sid_proc_event {
- __kernel_pid_t process_pid;
- __kernel_pid_t process_tgid;
- } sid;
-
- struct ptrace_proc_event {
- __kernel_pid_t process_pid;
- __kernel_pid_t process_tgid;
- __kernel_pid_t tracer_pid;
- __kernel_pid_t tracer_tgid;
- } ptrace;
-
- struct comm_proc_event {
- __kernel_pid_t process_pid;
- __kernel_pid_t process_tgid;
- char comm[16];
- } comm;
-
- struct exit_proc_event {
- __kernel_pid_t process_pid;
- __kernel_pid_t process_tgid;
- __u32 exit_code, exit_signal;
- } exit;
- } event_data;
-};
-
-#ifdef __KERNEL__
#ifdef CONFIG_PROC_EVENTS
void proc_fork_connector(struct task_struct *task);
void proc_exec_connector(struct task_struct *task);
@@ -151,5 +51,4 @@
static inline void proc_exit_connector(struct task_struct *task)
{}
#endif /* CONFIG_PROC_EVENTS */
-#endif /* __KERNEL__ */
#endif /* CN_PROC_H */
diff --git a/include/linux/coda.h b/include/linux/coda.h
index 96c8769..cff544f 100644
--- a/include/linux/coda.h
+++ b/include/linux/coda.h
@@ -55,690 +55,12 @@
* Linux modifications by
* Peter Braam, Aug 1996
*/
-
#ifndef _CODA_HEADER_
#define _CODA_HEADER_
-
-/* Catch new _KERNEL defn for NetBSD and DJGPP/__CYGWIN32__ */
-#if defined(__NetBSD__) || \
- ((defined(DJGPP) || defined(__CYGWIN32__)) && !defined(KERNEL))
-#include <sys/types.h>
-#endif
-
-#ifndef CODA_MAXSYMLINKS
-#define CODA_MAXSYMLINKS 10
-#endif
-
-#if defined(DJGPP) || defined(__CYGWIN32__)
-#ifdef KERNEL
-typedef unsigned long u_long;
-typedef unsigned int u_int;
-typedef unsigned short u_short;
-typedef u_long ino_t;
-typedef u_long dev_t;
-typedef void * caddr_t;
-#ifdef DOS
-typedef unsigned __int64 u_quad_t;
-#else
-typedef unsigned long long u_quad_t;
-#endif
-
-#define inline
-
-struct timespec {
- long ts_sec;
- long ts_nsec;
-};
-#else /* DJGPP but not KERNEL */
-#include <sys/time.h>
-typedef unsigned long long u_quad_t;
-#endif /* !KERNEL */
-#endif /* !DJGPP */
-
-
#if defined(__linux__)
-#include <linux/time.h>
-#define cdev_t u_quad_t
-#ifndef __KERNEL__
-#if !defined(_UQUAD_T_) && (!defined(__GLIBC__) || __GLIBC__ < 2)
-#define _UQUAD_T_ 1
typedef unsigned long long u_quad_t;
-#endif
-#else /*__KERNEL__ */
-typedef unsigned long long u_quad_t;
-#endif /* __KERNEL__ */
#else
-#define cdev_t dev_t
#endif
-
-#ifdef __CYGWIN32__
-struct timespec {
- time_t tv_sec; /* seconds */
- long tv_nsec; /* nanoseconds */
-};
-#endif
-
-#ifndef __BIT_TYPES_DEFINED__
-#define __BIT_TYPES_DEFINED__
-typedef signed char int8_t;
-typedef unsigned char u_int8_t;
-typedef short int16_t;
-typedef unsigned short u_int16_t;
-typedef int int32_t;
-typedef unsigned int u_int32_t;
-#endif
-
-
-/*
- * Cfs constants
- */
-#define CODA_MAXNAMLEN 255
-#define CODA_MAXPATHLEN 1024
-#define CODA_MAXSYMLINK 10
-
-/* these are Coda's version of O_RDONLY etc combinations
- * to deal with VFS open modes
- */
-#define C_O_READ 0x001
-#define C_O_WRITE 0x002
-#define C_O_TRUNC 0x010
-#define C_O_EXCL 0x100
-#define C_O_CREAT 0x200
-
-/* these are to find mode bits in Venus */
-#define C_M_READ 00400
-#define C_M_WRITE 00200
-
-/* for access Venus will use */
-#define C_A_C_OK 8 /* Test for writing upon create. */
-#define C_A_R_OK 4 /* Test for read permission. */
-#define C_A_W_OK 2 /* Test for write permission. */
-#define C_A_X_OK 1 /* Test for execute permission. */
-#define C_A_F_OK 0 /* Test for existence. */
-
-
-
-#ifndef _VENUS_DIRENT_T_
-#define _VENUS_DIRENT_T_ 1
-struct venus_dirent {
- u_int32_t d_fileno; /* file number of entry */
- u_int16_t d_reclen; /* length of this record */
- u_int8_t d_type; /* file type, see below */
- u_int8_t d_namlen; /* length of string in d_name */
- char d_name[CODA_MAXNAMLEN + 1];/* name must be no longer than this */
-};
-#undef DIRSIZ
-#define DIRSIZ(dp) ((sizeof (struct venus_dirent) - (CODA_MAXNAMLEN+1)) + \
- (((dp)->d_namlen+1 + 3) &~ 3))
-
-/*
- * File types
- */
-#define CDT_UNKNOWN 0
-#define CDT_FIFO 1
-#define CDT_CHR 2
-#define CDT_DIR 4
-#define CDT_BLK 6
-#define CDT_REG 8
-#define CDT_LNK 10
-#define CDT_SOCK 12
-#define CDT_WHT 14
-
-/*
- * Convert between stat structure types and directory types.
- */
-#define IFTOCDT(mode) (((mode) & 0170000) >> 12)
-#define CDTTOIF(dirtype) ((dirtype) << 12)
-
-#endif
-
-#ifndef _VUID_T_
-#define _VUID_T_
-typedef u_int32_t vuid_t;
-typedef u_int32_t vgid_t;
-#endif /*_VUID_T_ */
-
-struct CodaFid {
- u_int32_t opaque[4];
-};
-
-#define coda_f2i(fid)\
- (fid ? (fid->opaque[3] ^ (fid->opaque[2]<<10) ^ (fid->opaque[1]<<20) ^ fid->opaque[0]) : 0)
-
-#ifndef _VENUS_VATTR_T_
-#define _VENUS_VATTR_T_
-/*
- * Vnode types. VNON means no type.
- */
-enum coda_vtype { C_VNON, C_VREG, C_VDIR, C_VBLK, C_VCHR, C_VLNK, C_VSOCK, C_VFIFO, C_VBAD };
-
-struct coda_vattr {
- long va_type; /* vnode type (for create) */
- u_short va_mode; /* files access mode and type */
- short va_nlink; /* number of references to file */
- vuid_t va_uid; /* owner user id */
- vgid_t va_gid; /* owner group id */
- long va_fileid; /* file id */
- u_quad_t va_size; /* file size in bytes */
- long va_blocksize; /* blocksize preferred for i/o */
- struct timespec va_atime; /* time of last access */
- struct timespec va_mtime; /* time of last modification */
- struct timespec va_ctime; /* time file changed */
- u_long va_gen; /* generation number of file */
- u_long va_flags; /* flags defined for file */
- cdev_t va_rdev; /* device special file represents */
- u_quad_t va_bytes; /* bytes of disk space held by file */
- u_quad_t va_filerev; /* file modification number */
-};
-
+#include <uapi/linux/coda.h>
#endif
-
-/* structure used by CODA_STATFS for getting cache information from venus */
-struct coda_statfs {
- int32_t f_blocks;
- int32_t f_bfree;
- int32_t f_bavail;
- int32_t f_files;
- int32_t f_ffree;
-};
-
-/*
- * Kernel <--> Venus communications.
- */
-
-#define CODA_ROOT 2
-#define CODA_OPEN_BY_FD 3
-#define CODA_OPEN 4
-#define CODA_CLOSE 5
-#define CODA_IOCTL 6
-#define CODA_GETATTR 7
-#define CODA_SETATTR 8
-#define CODA_ACCESS 9
-#define CODA_LOOKUP 10
-#define CODA_CREATE 11
-#define CODA_REMOVE 12
-#define CODA_LINK 13
-#define CODA_RENAME 14
-#define CODA_MKDIR 15
-#define CODA_RMDIR 16
-#define CODA_SYMLINK 18
-#define CODA_READLINK 19
-#define CODA_FSYNC 20
-#define CODA_VGET 22
-#define CODA_SIGNAL 23
-#define CODA_REPLACE 24 /* DOWNCALL */
-#define CODA_FLUSH 25 /* DOWNCALL */
-#define CODA_PURGEUSER 26 /* DOWNCALL */
-#define CODA_ZAPFILE 27 /* DOWNCALL */
-#define CODA_ZAPDIR 28 /* DOWNCALL */
-#define CODA_PURGEFID 30 /* DOWNCALL */
-#define CODA_OPEN_BY_PATH 31
-#define CODA_RESOLVE 32
-#define CODA_REINTEGRATE 33
-#define CODA_STATFS 34
-#define CODA_STORE 35
-#define CODA_RELEASE 36
-#define CODA_NCALLS 37
-
-#define DOWNCALL(opcode) (opcode >= CODA_REPLACE && opcode <= CODA_PURGEFID)
-
-#define VC_MAXDATASIZE 8192
-#define VC_MAXMSGSIZE sizeof(union inputArgs)+sizeof(union outputArgs) +\
- VC_MAXDATASIZE
-
-#define CIOC_KERNEL_VERSION _IOWR('c', 10, size_t)
-
-#define CODA_KERNEL_VERSION 3 /* 128-bit file identifiers */
-
-/*
- * Venus <-> Coda RPC arguments
- */
-struct coda_in_hdr {
- u_int32_t opcode;
- u_int32_t unique; /* Keep multiple outstanding msgs distinct */
- pid_t pid;
- pid_t pgid;
- vuid_t uid;
-};
-
-/* Really important that opcode and unique are 1st two fields! */
-struct coda_out_hdr {
- u_int32_t opcode;
- u_int32_t unique;
- u_int32_t result;
-};
-
-/* coda_root: NO_IN */
-struct coda_root_out {
- struct coda_out_hdr oh;
- struct CodaFid VFid;
-};
-
-struct coda_root_in {
- struct coda_in_hdr in;
-};
-
-/* coda_open: */
-struct coda_open_in {
- struct coda_in_hdr ih;
- struct CodaFid VFid;
- int flags;
-};
-
-struct coda_open_out {
- struct coda_out_hdr oh;
- cdev_t dev;
- ino_t inode;
-};
-
-
-/* coda_store: */
-struct coda_store_in {
- struct coda_in_hdr ih;
- struct CodaFid VFid;
- int flags;
-};
-
-struct coda_store_out {
- struct coda_out_hdr out;
-};
-
-/* coda_release: */
-struct coda_release_in {
- struct coda_in_hdr ih;
- struct CodaFid VFid;
- int flags;
-};
-
-struct coda_release_out {
- struct coda_out_hdr out;
-};
-
-/* coda_close: */
-struct coda_close_in {
- struct coda_in_hdr ih;
- struct CodaFid VFid;
- int flags;
-};
-
-struct coda_close_out {
- struct coda_out_hdr out;
-};
-
-/* coda_ioctl: */
-struct coda_ioctl_in {
- struct coda_in_hdr ih;
- struct CodaFid VFid;
- int cmd;
- int len;
- int rwflag;
- char *data; /* Place holder for data. */
-};
-
-struct coda_ioctl_out {
- struct coda_out_hdr oh;
- int len;
- caddr_t data; /* Place holder for data. */
-};
-
-
-/* coda_getattr: */
-struct coda_getattr_in {
- struct coda_in_hdr ih;
- struct CodaFid VFid;
-};
-
-struct coda_getattr_out {
- struct coda_out_hdr oh;
- struct coda_vattr attr;
-};
-
-
-/* coda_setattr: NO_OUT */
-struct coda_setattr_in {
- struct coda_in_hdr ih;
- struct CodaFid VFid;
- struct coda_vattr attr;
-};
-
-struct coda_setattr_out {
- struct coda_out_hdr out;
-};
-
-/* coda_access: NO_OUT */
-struct coda_access_in {
- struct coda_in_hdr ih;
- struct CodaFid VFid;
- int flags;
-};
-
-struct coda_access_out {
- struct coda_out_hdr out;
-};
-
-
-/* lookup flags */
-#define CLU_CASE_SENSITIVE 0x01
-#define CLU_CASE_INSENSITIVE 0x02
-
-/* coda_lookup: */
-struct coda_lookup_in {
- struct coda_in_hdr ih;
- struct CodaFid VFid;
- int name; /* Place holder for data. */
- int flags;
-};
-
-struct coda_lookup_out {
- struct coda_out_hdr oh;
- struct CodaFid VFid;
- int vtype;
-};
-
-
-/* coda_create: */
-struct coda_create_in {
- struct coda_in_hdr ih;
- struct CodaFid VFid;
- struct coda_vattr attr;
- int excl;
- int mode;
- int name; /* Place holder for data. */
-};
-
-struct coda_create_out {
- struct coda_out_hdr oh;
- struct CodaFid VFid;
- struct coda_vattr attr;
-};
-
-
-/* coda_remove: NO_OUT */
-struct coda_remove_in {
- struct coda_in_hdr ih;
- struct CodaFid VFid;
- int name; /* Place holder for data. */
-};
-
-struct coda_remove_out {
- struct coda_out_hdr out;
-};
-
-/* coda_link: NO_OUT */
-struct coda_link_in {
- struct coda_in_hdr ih;
- struct CodaFid sourceFid; /* cnode to link *to* */
- struct CodaFid destFid; /* Directory in which to place link */
- int tname; /* Place holder for data. */
-};
-
-struct coda_link_out {
- struct coda_out_hdr out;
-};
-
-
-/* coda_rename: NO_OUT */
-struct coda_rename_in {
- struct coda_in_hdr ih;
- struct CodaFid sourceFid;
- int srcname;
- struct CodaFid destFid;
- int destname;
-};
-
-struct coda_rename_out {
- struct coda_out_hdr out;
-};
-
-/* coda_mkdir: */
-struct coda_mkdir_in {
- struct coda_in_hdr ih;
- struct CodaFid VFid;
- struct coda_vattr attr;
- int name; /* Place holder for data. */
-};
-
-struct coda_mkdir_out {
- struct coda_out_hdr oh;
- struct CodaFid VFid;
- struct coda_vattr attr;
-};
-
-
-/* coda_rmdir: NO_OUT */
-struct coda_rmdir_in {
- struct coda_in_hdr ih;
- struct CodaFid VFid;
- int name; /* Place holder for data. */
-};
-
-struct coda_rmdir_out {
- struct coda_out_hdr out;
-};
-
-/* coda_symlink: NO_OUT */
-struct coda_symlink_in {
- struct coda_in_hdr ih;
- struct CodaFid VFid; /* Directory to put symlink in */
- int srcname;
- struct coda_vattr attr;
- int tname;
-};
-
-struct coda_symlink_out {
- struct coda_out_hdr out;
-};
-
-/* coda_readlink: */
-struct coda_readlink_in {
- struct coda_in_hdr ih;
- struct CodaFid VFid;
-};
-
-struct coda_readlink_out {
- struct coda_out_hdr oh;
- int count;
- caddr_t data; /* Place holder for data. */
-};
-
-
-/* coda_fsync: NO_OUT */
-struct coda_fsync_in {
- struct coda_in_hdr ih;
- struct CodaFid VFid;
-};
-
-struct coda_fsync_out {
- struct coda_out_hdr out;
-};
-
-/* coda_vget: */
-struct coda_vget_in {
- struct coda_in_hdr ih;
- struct CodaFid VFid;
-};
-
-struct coda_vget_out {
- struct coda_out_hdr oh;
- struct CodaFid VFid;
- int vtype;
-};
-
-
-/* CODA_SIGNAL is out-of-band, doesn't need data. */
-/* CODA_INVALIDATE is a venus->kernel call */
-/* CODA_FLUSH is a venus->kernel call */
-
-/* coda_purgeuser: */
-/* CODA_PURGEUSER is a venus->kernel call */
-struct coda_purgeuser_out {
- struct coda_out_hdr oh;
- vuid_t uid;
-};
-
-/* coda_zapfile: */
-/* CODA_ZAPFILE is a venus->kernel call */
-struct coda_zapfile_out {
- struct coda_out_hdr oh;
- struct CodaFid CodaFid;
-};
-
-/* coda_zapdir: */
-/* CODA_ZAPDIR is a venus->kernel call */
-struct coda_zapdir_out {
- struct coda_out_hdr oh;
- struct CodaFid CodaFid;
-};
-
-/* coda_purgefid: */
-/* CODA_PURGEFID is a venus->kernel call */
-struct coda_purgefid_out {
- struct coda_out_hdr oh;
- struct CodaFid CodaFid;
-};
-
-/* coda_replace: */
-/* CODA_REPLACE is a venus->kernel call */
-struct coda_replace_out { /* coda_replace is a venus->kernel call */
- struct coda_out_hdr oh;
- struct CodaFid NewFid;
- struct CodaFid OldFid;
-};
-
-/* coda_open_by_fd: */
-struct coda_open_by_fd_in {
- struct coda_in_hdr ih;
- struct CodaFid VFid;
- int flags;
-};
-
-struct coda_open_by_fd_out {
- struct coda_out_hdr oh;
- int fd;
-
-#ifdef __KERNEL__
- struct file *fh; /* not passed from userspace but used in-kernel only */
-#endif
-};
-
-/* coda_open_by_path: */
-struct coda_open_by_path_in {
- struct coda_in_hdr ih;
- struct CodaFid VFid;
- int flags;
-};
-
-struct coda_open_by_path_out {
- struct coda_out_hdr oh;
- int path;
-};
-
-/* coda_statfs: NO_IN */
-struct coda_statfs_in {
- struct coda_in_hdr in;
-};
-
-struct coda_statfs_out {
- struct coda_out_hdr oh;
- struct coda_statfs stat;
-};
-
-/*
- * Occasionally, we don't cache the fid returned by CODA_LOOKUP.
- * For instance, if the fid is inconsistent.
- * This case is handled by setting the top bit of the type result parameter.
- */
-#define CODA_NOCACHE 0x80000000
-
-union inputArgs {
- struct coda_in_hdr ih; /* NB: every struct below begins with an ih */
- struct coda_open_in coda_open;
- struct coda_store_in coda_store;
- struct coda_release_in coda_release;
- struct coda_close_in coda_close;
- struct coda_ioctl_in coda_ioctl;
- struct coda_getattr_in coda_getattr;
- struct coda_setattr_in coda_setattr;
- struct coda_access_in coda_access;
- struct coda_lookup_in coda_lookup;
- struct coda_create_in coda_create;
- struct coda_remove_in coda_remove;
- struct coda_link_in coda_link;
- struct coda_rename_in coda_rename;
- struct coda_mkdir_in coda_mkdir;
- struct coda_rmdir_in coda_rmdir;
- struct coda_symlink_in coda_symlink;
- struct coda_readlink_in coda_readlink;
- struct coda_fsync_in coda_fsync;
- struct coda_vget_in coda_vget;
- struct coda_open_by_fd_in coda_open_by_fd;
- struct coda_open_by_path_in coda_open_by_path;
- struct coda_statfs_in coda_statfs;
-};
-
-union outputArgs {
- struct coda_out_hdr oh; /* NB: every struct below begins with an oh */
- struct coda_root_out coda_root;
- struct coda_open_out coda_open;
- struct coda_ioctl_out coda_ioctl;
- struct coda_getattr_out coda_getattr;
- struct coda_lookup_out coda_lookup;
- struct coda_create_out coda_create;
- struct coda_mkdir_out coda_mkdir;
- struct coda_readlink_out coda_readlink;
- struct coda_vget_out coda_vget;
- struct coda_purgeuser_out coda_purgeuser;
- struct coda_zapfile_out coda_zapfile;
- struct coda_zapdir_out coda_zapdir;
- struct coda_purgefid_out coda_purgefid;
- struct coda_replace_out coda_replace;
- struct coda_open_by_fd_out coda_open_by_fd;
- struct coda_open_by_path_out coda_open_by_path;
- struct coda_statfs_out coda_statfs;
-};
-
-union coda_downcalls {
- /* CODA_INVALIDATE is a venus->kernel call */
- /* CODA_FLUSH is a venus->kernel call */
- struct coda_purgeuser_out purgeuser;
- struct coda_zapfile_out zapfile;
- struct coda_zapdir_out zapdir;
- struct coda_purgefid_out purgefid;
- struct coda_replace_out replace;
-};
-
-
-/*
- * Used for identifying usage of "Control" and pioctls
- */
-
-#define PIOCPARM_MASK 0x0000ffff
-struct ViceIoctl {
- void __user *in; /* Data to be transferred in */
- void __user *out; /* Data to be transferred out */
- u_short in_size; /* Size of input buffer <= 2K */
- u_short out_size; /* Maximum size of output buffer, <= 2K */
-};
-
-struct PioctlData {
- const char __user *path;
- int follow;
- struct ViceIoctl vi;
-};
-
-#define CODA_CONTROL ".CONTROL"
-#define CODA_CONTROLLEN 8
-#define CTL_INO -1
-
-/* Data passed to mount */
-
-#define CODA_MOUNT_VERSION 1
-
-struct coda_mount_data {
- int version;
- int fd; /* Opened device */
-};
-
-#endif
-
diff --git a/include/linux/coda_psdev.h b/include/linux/coda_psdev.h
index 72f2d2f..8031d6e 100644
--- a/include/linux/coda_psdev.h
+++ b/include/linux/coda_psdev.h
@@ -1,14 +1,9 @@
#ifndef __CODA_PSDEV_H
#define __CODA_PSDEV_H
-#include <linux/magic.h>
-
-#define CODA_PSDEV_MAJOR 67
-#define MAX_CODADEVS 5 /* how many do we allow */
-
-#ifdef __KERNEL__
#include <linux/backing-dev.h>
#include <linux/mutex.h>
+#include <uapi/linux/coda_psdev.h>
struct kstatfs;
@@ -74,23 +69,4 @@
*/
extern struct venus_comm coda_comms[];
-#endif /* __KERNEL__ */
-
-/* messages between coda filesystem in kernel and Venus */
-struct upc_req {
- struct list_head uc_chain;
- caddr_t uc_data;
- u_short uc_flags;
- u_short uc_inSize; /* Size is at most 5000 bytes */
- u_short uc_outSize;
- u_short uc_opcode; /* copied from data to save lookup */
- int uc_unique;
- wait_queue_head_t uc_sleep; /* process' wait queue */
-};
-
-#define CODA_REQ_ASYNC 0x1
-#define CODA_REQ_READ 0x2
-#define CODA_REQ_WRITE 0x4
-#define CODA_REQ_ABORT 0x8
-
#endif
diff --git a/include/linux/connector.h b/include/linux/connector.h
index 7638407..b2b5a41 100644
--- a/include/linux/connector.h
+++ b/include/linux/connector.h
@@ -18,63 +18,9 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-
#ifndef __CONNECTOR_H
#define __CONNECTOR_H
-#include <linux/types.h>
-
-/*
- * Process Events connector unique ids -- used for message routing
- */
-#define CN_IDX_PROC 0x1
-#define CN_VAL_PROC 0x1
-#define CN_IDX_CIFS 0x2
-#define CN_VAL_CIFS 0x1
-#define CN_W1_IDX 0x3 /* w1 communication */
-#define CN_W1_VAL 0x1
-#define CN_IDX_V86D 0x4
-#define CN_VAL_V86D_UVESAFB 0x1
-#define CN_IDX_BB 0x5 /* BlackBoard, from the TSP GPL sampling framework */
-#define CN_DST_IDX 0x6
-#define CN_DST_VAL 0x1
-#define CN_IDX_DM 0x7 /* Device Mapper */
-#define CN_VAL_DM_USERSPACE_LOG 0x1
-#define CN_IDX_DRBD 0x8
-#define CN_VAL_DRBD 0x1
-#define CN_KVP_IDX 0x9 /* HyperV KVP */
-#define CN_KVP_VAL 0x1 /* queries from the kernel */
-
-#define CN_NETLINK_USERS 10 /* Highest index + 1 */
-
-/*
- * Maximum connector's message size.
- */
-#define CONNECTOR_MAX_MSG_SIZE 16384
-
-/*
- * idx and val are unique identifiers which
- * are used for message routing and
- * must be registered in connector.h for in-kernel usage.
- */
-
-struct cb_id {
- __u32 idx;
- __u32 val;
-};
-
-struct cn_msg {
- struct cb_id id;
-
- __u32 seq;
- __u32 ack;
-
- __u16 len; /* Length of the following data */
- __u16 flags;
- __u8 data[0];
-};
-
-#ifdef __KERNEL__
#include <linux/atomic.h>
@@ -82,6 +28,7 @@
#include <linux/workqueue.h>
#include <net/sock.h>
+#include <uapi/linux/connector.h>
#define CN_CBQ_NAMELEN 32
@@ -137,5 +84,4 @@
int cn_cb_equal(struct cb_id *, struct cb_id *);
-#endif /* __KERNEL__ */
#endif /* __CONNECTOR_H */
diff --git a/include/linux/cramfs_fs.h b/include/linux/cramfs_fs.h
index 0e7bf27..1337896 100644
--- a/include/linux/cramfs_fs.h
+++ b/include/linux/cramfs_fs.h
@@ -1,94 +1,10 @@
#ifndef __CRAMFS_H
#define __CRAMFS_H
-#include <linux/types.h>
-#include <linux/magic.h>
+#include <uapi/linux/cramfs_fs.h>
-#define CRAMFS_SIGNATURE "Compressed ROMFS"
-
-/*
- * Width of various bitfields in struct cramfs_inode.
- * Primarily used to generate warnings in mkcramfs.
- */
-#define CRAMFS_MODE_WIDTH 16
-#define CRAMFS_UID_WIDTH 16
-#define CRAMFS_SIZE_WIDTH 24
-#define CRAMFS_GID_WIDTH 8
-#define CRAMFS_NAMELEN_WIDTH 6
-#define CRAMFS_OFFSET_WIDTH 26
-
-/*
- * Since inode.namelen is a unsigned 6-bit number, the maximum cramfs
- * path length is 63 << 2 = 252.
- */
-#define CRAMFS_MAXPATHLEN (((1 << CRAMFS_NAMELEN_WIDTH) - 1) << 2)
-
-/*
- * Reasonably terse representation of the inode data.
- */
-struct cramfs_inode {
- __u32 mode:CRAMFS_MODE_WIDTH, uid:CRAMFS_UID_WIDTH;
- /* SIZE for device files is i_rdev */
- __u32 size:CRAMFS_SIZE_WIDTH, gid:CRAMFS_GID_WIDTH;
- /* NAMELEN is the length of the file name, divided by 4 and
- rounded up. (cramfs doesn't support hard links.) */
- /* OFFSET: For symlinks and non-empty regular files, this
- contains the offset (divided by 4) of the file data in
- compressed form (starting with an array of block pointers;
- see README). For non-empty directories it is the offset
- (divided by 4) of the inode of the first file in that
- directory. For anything else, offset is zero. */
- __u32 namelen:CRAMFS_NAMELEN_WIDTH, offset:CRAMFS_OFFSET_WIDTH;
-};
-
-struct cramfs_info {
- __u32 crc;
- __u32 edition;
- __u32 blocks;
- __u32 files;
-};
-
-/*
- * Superblock information at the beginning of the FS.
- */
-struct cramfs_super {
- __u32 magic; /* 0x28cd3d45 - random number */
- __u32 size; /* length in bytes */
- __u32 flags; /* feature flags */
- __u32 future; /* reserved for future use */
- __u8 signature[16]; /* "Compressed ROMFS" */
- struct cramfs_info fsid; /* unique filesystem info */
- __u8 name[16]; /* user-defined name */
- struct cramfs_inode root; /* root inode data */
-};
-
-/*
- * Feature flags
- *
- * 0x00000000 - 0x000000ff: features that work for all past kernels
- * 0x00000100 - 0xffffffff: features that don't work for past kernels
- */
-#define CRAMFS_FLAG_FSID_VERSION_2 0x00000001 /* fsid version #2 */
-#define CRAMFS_FLAG_SORTED_DIRS 0x00000002 /* sorted dirs */
-#define CRAMFS_FLAG_HOLES 0x00000100 /* support for holes */
-#define CRAMFS_FLAG_WRONG_SIGNATURE 0x00000200 /* reserved */
-#define CRAMFS_FLAG_SHIFTED_ROOT_OFFSET 0x00000400 /* shifted root fs */
-
-/*
- * Valid values in super.flags. Currently we refuse to mount
- * if (flags & ~CRAMFS_SUPPORTED_FLAGS). Maybe that should be
- * changed to test super.future instead.
- */
-#define CRAMFS_SUPPORTED_FLAGS ( 0x000000ff \
- | CRAMFS_FLAG_HOLES \
- | CRAMFS_FLAG_WRONG_SIGNATURE \
- | CRAMFS_FLAG_SHIFTED_ROOT_OFFSET )
-
-#ifdef __KERNEL__
/* Uncompression interfaces to the underlying zlib */
int cramfs_uncompress_block(void *dst, int dstlen, void *src, int srclen);
int cramfs_uncompress_init(void);
void cramfs_uncompress_exit(void);
-#endif /* __KERNEL__ */
-
#endif
diff --git a/include/linux/cuda.h b/include/linux/cuda.h
index 9f9865f..b723328 100644
--- a/include/linux/cuda.h
+++ b/include/linux/cuda.h
@@ -4,38 +4,15 @@
*
* Copyright (C) 1996 Paul Mackerras.
*/
-
#ifndef _LINUX_CUDA_H
#define _LINUX_CUDA_H
-/* CUDA commands (2nd byte) */
-#define CUDA_WARM_START 0
-#define CUDA_AUTOPOLL 1
-#define CUDA_GET_6805_ADDR 2
-#define CUDA_GET_TIME 3
-#define CUDA_GET_PRAM 7
-#define CUDA_SET_6805_ADDR 8
-#define CUDA_SET_TIME 9
-#define CUDA_POWERDOWN 0xa
-#define CUDA_POWERUP_TIME 0xb
-#define CUDA_SET_PRAM 0xc
-#define CUDA_MS_RESET 0xd
-#define CUDA_SEND_DFAC 0xe
-#define CUDA_RESET_SYSTEM 0x11
-#define CUDA_SET_IPL 0x12
-#define CUDA_SET_AUTO_RATE 0x14
-#define CUDA_GET_AUTO_RATE 0x16
-#define CUDA_SET_DEVICE_LIST 0x19
-#define CUDA_GET_DEVICE_LIST 0x1a
-#define CUDA_GET_SET_IIC 0x22
+#include <uapi/linux/cuda.h>
-#ifdef __KERNEL__
extern int find_via_cuda(void);
extern int cuda_request(struct adb_request *req,
void (*done)(struct adb_request *), int nbytes, ...);
extern void cuda_poll(void);
-#endif /* __KERNEL */
-
#endif /* _LINUX_CUDA_H */
diff --git a/include/linux/cyclades.h b/include/linux/cyclades.h
index a5049ea..19ae518 100644
--- a/include/linux/cyclades.h
+++ b/include/linux/cyclades.h
@@ -63,434 +63,11 @@
*
*
*/
-
#ifndef _LINUX_CYCLADES_H
#define _LINUX_CYCLADES_H
-#include <linux/types.h>
-
-struct cyclades_monitor {
- unsigned long int_count;
- unsigned long char_count;
- unsigned long char_max;
- unsigned long char_last;
-};
-
-/*
- * These stats all reflect activity since the device was last initialized.
- * (i.e., since the port was opened with no other processes already having it
- * open)
- */
-struct cyclades_idle_stats {
- __kernel_time_t in_use; /* Time device has been in use (secs) */
- __kernel_time_t recv_idle; /* Time since last char received (secs) */
- __kernel_time_t xmit_idle; /* Time since last char transmitted (secs) */
- unsigned long recv_bytes; /* Bytes received */
- unsigned long xmit_bytes; /* Bytes transmitted */
- unsigned long overruns; /* Input overruns */
- unsigned long frame_errs; /* Input framing errors */
- unsigned long parity_errs; /* Input parity errors */
-};
-
-#define CYCLADES_MAGIC 0x4359
-
-#define CYGETMON 0x435901
-#define CYGETTHRESH 0x435902
-#define CYSETTHRESH 0x435903
-#define CYGETDEFTHRESH 0x435904
-#define CYSETDEFTHRESH 0x435905
-#define CYGETTIMEOUT 0x435906
-#define CYSETTIMEOUT 0x435907
-#define CYGETDEFTIMEOUT 0x435908
-#define CYSETDEFTIMEOUT 0x435909
-#define CYSETRFLOW 0x43590a
-#define CYGETRFLOW 0x43590b
-#define CYSETRTSDTR_INV 0x43590c
-#define CYGETRTSDTR_INV 0x43590d
-#define CYZSETPOLLCYCLE 0x43590e
-#define CYZGETPOLLCYCLE 0x43590f
-#define CYGETCD1400VER 0x435910
-#define CYSETWAIT 0x435912
-#define CYGETWAIT 0x435913
-
-/*************** CYCLOM-Z ADDITIONS ***************/
-
-#define CZIOC ('M' << 8)
-#define CZ_NBOARDS (CZIOC|0xfa)
-#define CZ_BOOT_START (CZIOC|0xfb)
-#define CZ_BOOT_DATA (CZIOC|0xfc)
-#define CZ_BOOT_END (CZIOC|0xfd)
-#define CZ_TEST (CZIOC|0xfe)
-
-#define CZ_DEF_POLL (HZ/25)
-
-#define MAX_BOARD 4 /* Max number of boards */
-#define MAX_DEV 256 /* Max number of ports total */
-#define CYZ_MAX_SPEED 921600
-
-#define CYZ_FIFO_SIZE 16
-
-#define CYZ_BOOT_NWORDS 0x100
-struct CYZ_BOOT_CTRL {
- unsigned short nboard;
- int status[MAX_BOARD];
- int nchannel[MAX_BOARD];
- int fw_rev[MAX_BOARD];
- unsigned long offset;
- unsigned long data[CYZ_BOOT_NWORDS];
-};
-
-
-#ifndef DP_WINDOW_SIZE
-/*
- * Memory Window Sizes
- */
-
-#define DP_WINDOW_SIZE (0x00080000) /* window size 512 Kb */
-#define ZE_DP_WINDOW_SIZE (0x00100000) /* window size 1 Mb (Ze and
- 8Zo V.2 */
-#define CTRL_WINDOW_SIZE (0x00000080) /* runtime regs 128 bytes */
-
-/*
- * CUSTOM_REG - Cyclom-Z/PCI Custom Registers Set. The driver
- * normally will access only interested on the fpga_id, fpga_version,
- * start_cpu and stop_cpu.
- */
-
-struct CUSTOM_REG {
- __u32 fpga_id; /* FPGA Identification Register */
- __u32 fpga_version; /* FPGA Version Number Register */
- __u32 cpu_start; /* CPU start Register (write) */
- __u32 cpu_stop; /* CPU stop Register (write) */
- __u32 misc_reg; /* Miscellaneous Register */
- __u32 idt_mode; /* IDT mode Register */
- __u32 uart_irq_status; /* UART IRQ status Register */
- __u32 clear_timer0_irq; /* Clear timer interrupt Register */
- __u32 clear_timer1_irq; /* Clear timer interrupt Register */
- __u32 clear_timer2_irq; /* Clear timer interrupt Register */
- __u32 test_register; /* Test Register */
- __u32 test_count; /* Test Count Register */
- __u32 timer_select; /* Timer select register */
- __u32 pr_uart_irq_status; /* Prioritized UART IRQ stat Reg */
- __u32 ram_wait_state; /* RAM wait-state Register */
- __u32 uart_wait_state; /* UART wait-state Register */
- __u32 timer_wait_state; /* timer wait-state Register */
- __u32 ack_wait_state; /* ACK wait State Register */
-};
-
-/*
- * RUNTIME_9060 - PLX PCI9060ES local configuration and shared runtime
- * registers. This structure can be used to access the 9060 registers
- * (memory mapped).
- */
-
-struct RUNTIME_9060 {
- __u32 loc_addr_range; /* 00h - Local Address Range */
- __u32 loc_addr_base; /* 04h - Local Address Base */
- __u32 loc_arbitr; /* 08h - Local Arbitration */
- __u32 endian_descr; /* 0Ch - Big/Little Endian Descriptor */
- __u32 loc_rom_range; /* 10h - Local ROM Range */
- __u32 loc_rom_base; /* 14h - Local ROM Base */
- __u32 loc_bus_descr; /* 18h - Local Bus descriptor */
- __u32 loc_range_mst; /* 1Ch - Local Range for Master to PCI */
- __u32 loc_base_mst; /* 20h - Local Base for Master PCI */
- __u32 loc_range_io; /* 24h - Local Range for Master IO */
- __u32 pci_base_mst; /* 28h - PCI Base for Master PCI */
- __u32 pci_conf_io; /* 2Ch - PCI configuration for Master IO */
- __u32 filler1; /* 30h */
- __u32 filler2; /* 34h */
- __u32 filler3; /* 38h */
- __u32 filler4; /* 3Ch */
- __u32 mail_box_0; /* 40h - Mail Box 0 */
- __u32 mail_box_1; /* 44h - Mail Box 1 */
- __u32 mail_box_2; /* 48h - Mail Box 2 */
- __u32 mail_box_3; /* 4Ch - Mail Box 3 */
- __u32 filler5; /* 50h */
- __u32 filler6; /* 54h */
- __u32 filler7; /* 58h */
- __u32 filler8; /* 5Ch */
- __u32 pci_doorbell; /* 60h - PCI to Local Doorbell */
- __u32 loc_doorbell; /* 64h - Local to PCI Doorbell */
- __u32 intr_ctrl_stat; /* 68h - Interrupt Control/Status */
- __u32 init_ctrl; /* 6Ch - EEPROM control, Init Control, etc */
-};
-
-/* Values for the Local Base Address re-map register */
-
-#define WIN_RAM 0x00000001L /* set the sliding window to RAM */
-#define WIN_CREG 0x14000001L /* set the window to custom Registers */
-
-/* Values timer select registers */
-
-#define TIMER_BY_1M 0x00 /* clock divided by 1M */
-#define TIMER_BY_256K 0x01 /* clock divided by 256k */
-#define TIMER_BY_128K 0x02 /* clock divided by 128k */
-#define TIMER_BY_32K 0x03 /* clock divided by 32k */
-
-/****************** ****************** *******************/
-#endif
-
-#ifndef ZFIRM_ID
-/* #include "zfwint.h" */
-/****************** ****************** *******************/
-/*
- * This file contains the definitions for interfacing with the
- * Cyclom-Z ZFIRM Firmware.
- */
-
-/* General Constant definitions */
-
-#define MAX_CHAN 64 /* max number of channels per board */
-
-/* firmware id structure (set after boot) */
-
-#define ID_ADDRESS 0x00000180L /* signature/pointer address */
-#define ZFIRM_ID 0x5557465AL /* ZFIRM/U signature */
-#define ZFIRM_HLT 0x59505B5CL /* ZFIRM needs external power supply */
-#define ZFIRM_RST 0x56040674L /* RST signal (due to FW reset) */
-
-#define ZF_TINACT_DEF 1000 /* default inactivity timeout
- (1000 ms) */
-#define ZF_TINACT ZF_TINACT_DEF
-
-struct FIRM_ID {
- __u32 signature; /* ZFIRM/U signature */
- __u32 zfwctrl_addr; /* pointer to ZFW_CTRL structure */
-};
-
-/* Op. System id */
-
-#define C_OS_LINUX 0x00000030 /* generic Linux system */
-
-/* channel op_mode */
-
-#define C_CH_DISABLE 0x00000000 /* channel is disabled */
-#define C_CH_TXENABLE 0x00000001 /* channel Tx enabled */
-#define C_CH_RXENABLE 0x00000002 /* channel Rx enabled */
-#define C_CH_ENABLE 0x00000003 /* channel Tx/Rx enabled */
-#define C_CH_LOOPBACK 0x00000004 /* Loopback mode */
-
-/* comm_parity - parity */
-
-#define C_PR_NONE 0x00000000 /* None */
-#define C_PR_ODD 0x00000001 /* Odd */
-#define C_PR_EVEN 0x00000002 /* Even */
-#define C_PR_MARK 0x00000004 /* Mark */
-#define C_PR_SPACE 0x00000008 /* Space */
-#define C_PR_PARITY 0x000000ff
-
-#define C_PR_DISCARD 0x00000100 /* discard char with frame/par error */
-#define C_PR_IGNORE 0x00000200 /* ignore frame/par error */
-
-/* comm_data_l - data length and stop bits */
-
-#define C_DL_CS5 0x00000001
-#define C_DL_CS6 0x00000002
-#define C_DL_CS7 0x00000004
-#define C_DL_CS8 0x00000008
-#define C_DL_CS 0x0000000f
-#define C_DL_1STOP 0x00000010
-#define C_DL_15STOP 0x00000020
-#define C_DL_2STOP 0x00000040
-#define C_DL_STOP 0x000000f0
-
-/* interrupt enabling/status */
-
-#define C_IN_DISABLE 0x00000000 /* zero, disable interrupts */
-#define C_IN_TXBEMPTY 0x00000001 /* tx buffer empty */
-#define C_IN_TXLOWWM 0x00000002 /* tx buffer below LWM */
-#define C_IN_RXHIWM 0x00000010 /* rx buffer above HWM */
-#define C_IN_RXNNDT 0x00000020 /* rx no new data timeout */
-#define C_IN_MDCD 0x00000100 /* modem DCD change */
-#define C_IN_MDSR 0x00000200 /* modem DSR change */
-#define C_IN_MRI 0x00000400 /* modem RI change */
-#define C_IN_MCTS 0x00000800 /* modem CTS change */
-#define C_IN_RXBRK 0x00001000 /* Break received */
-#define C_IN_PR_ERROR 0x00002000 /* parity error */
-#define C_IN_FR_ERROR 0x00004000 /* frame error */
-#define C_IN_OVR_ERROR 0x00008000 /* overrun error */
-#define C_IN_RXOFL 0x00010000 /* RX buffer overflow */
-#define C_IN_IOCTLW 0x00020000 /* I/O control w/ wait */
-#define C_IN_MRTS 0x00040000 /* modem RTS drop */
-#define C_IN_ICHAR 0x00080000
-
-/* flow control */
-
-#define C_FL_OXX 0x00000001 /* output Xon/Xoff flow control */
-#define C_FL_IXX 0x00000002 /* output Xon/Xoff flow control */
-#define C_FL_OIXANY 0x00000004 /* output Xon/Xoff (any xon) */
-#define C_FL_SWFLOW 0x0000000f
-
-/* flow status */
-
-#define C_FS_TXIDLE 0x00000000 /* no Tx data in the buffer or UART */
-#define C_FS_SENDING 0x00000001 /* UART is sending data */
-#define C_FS_SWFLOW 0x00000002 /* Tx is stopped by received Xoff */
-
-/* rs_control/rs_status RS-232 signals */
-
-#define C_RS_PARAM 0x80000000 /* Indicates presence of parameter in
- IOCTLM command */
-#define C_RS_RTS 0x00000001 /* RTS */
-#define C_RS_DTR 0x00000004 /* DTR */
-#define C_RS_DCD 0x00000100 /* CD */
-#define C_RS_DSR 0x00000200 /* DSR */
-#define C_RS_RI 0x00000400 /* RI */
-#define C_RS_CTS 0x00000800 /* CTS */
-
-/* commands Host <-> Board */
-
-#define C_CM_RESET 0x01 /* reset/flush buffers */
-#define C_CM_IOCTL 0x02 /* re-read CH_CTRL */
-#define C_CM_IOCTLW 0x03 /* re-read CH_CTRL, intr when done */
-#define C_CM_IOCTLM 0x04 /* RS-232 outputs change */
-#define C_CM_SENDXOFF 0x10 /* send Xoff */
-#define C_CM_SENDXON 0x11 /* send Xon */
-#define C_CM_CLFLOW 0x12 /* Clear flow control (resume) */
-#define C_CM_SENDBRK 0x41 /* send break */
-#define C_CM_INTBACK 0x42 /* Interrupt back */
-#define C_CM_SET_BREAK 0x43 /* Tx break on */
-#define C_CM_CLR_BREAK 0x44 /* Tx break off */
-#define C_CM_CMD_DONE 0x45 /* Previous command done */
-#define C_CM_INTBACK2 0x46 /* Alternate Interrupt back */
-#define C_CM_TINACT 0x51 /* set inactivity detection */
-#define C_CM_IRQ_ENBL 0x52 /* enable generation of interrupts */
-#define C_CM_IRQ_DSBL 0x53 /* disable generation of interrupts */
-#define C_CM_ACK_ENBL 0x54 /* enable acknowledged interrupt mode */
-#define C_CM_ACK_DSBL 0x55 /* disable acknowledged intr mode */
-#define C_CM_FLUSH_RX 0x56 /* flushes Rx buffer */
-#define C_CM_FLUSH_TX 0x57 /* flushes Tx buffer */
-#define C_CM_Q_ENABLE 0x58 /* enables queue access from the
- driver */
-#define C_CM_Q_DISABLE 0x59 /* disables queue access from the
- driver */
-
-#define C_CM_TXBEMPTY 0x60 /* Tx buffer is empty */
-#define C_CM_TXLOWWM 0x61 /* Tx buffer low water mark */
-#define C_CM_RXHIWM 0x62 /* Rx buffer high water mark */
-#define C_CM_RXNNDT 0x63 /* rx no new data timeout */
-#define C_CM_TXFEMPTY 0x64
-#define C_CM_ICHAR 0x65
-#define C_CM_MDCD 0x70 /* modem DCD change */
-#define C_CM_MDSR 0x71 /* modem DSR change */
-#define C_CM_MRI 0x72 /* modem RI change */
-#define C_CM_MCTS 0x73 /* modem CTS change */
-#define C_CM_MRTS 0x74 /* modem RTS drop */
-#define C_CM_RXBRK 0x84 /* Break received */
-#define C_CM_PR_ERROR 0x85 /* Parity error */
-#define C_CM_FR_ERROR 0x86 /* Frame error */
-#define C_CM_OVR_ERROR 0x87 /* Overrun error */
-#define C_CM_RXOFL 0x88 /* RX buffer overflow */
-#define C_CM_CMDERROR 0x90 /* command error */
-#define C_CM_FATAL 0x91 /* fatal error */
-#define C_CM_HW_RESET 0x92 /* reset board */
-
-/*
- * CH_CTRL - This per port structure contains all parameters
- * that control an specific port. It can be seen as the
- * configuration registers of a "super-serial-controller".
- */
-
-struct CH_CTRL {
- __u32 op_mode; /* operation mode */
- __u32 intr_enable; /* interrupt masking */
- __u32 sw_flow; /* SW flow control */
- __u32 flow_status; /* output flow status */
- __u32 comm_baud; /* baud rate - numerically specified */
- __u32 comm_parity; /* parity */
- __u32 comm_data_l; /* data length/stop */
- __u32 comm_flags; /* other flags */
- __u32 hw_flow; /* HW flow control */
- __u32 rs_control; /* RS-232 outputs */
- __u32 rs_status; /* RS-232 inputs */
- __u32 flow_xon; /* xon char */
- __u32 flow_xoff; /* xoff char */
- __u32 hw_overflow; /* hw overflow counter */
- __u32 sw_overflow; /* sw overflow counter */
- __u32 comm_error; /* frame/parity error counter */
- __u32 ichar;
- __u32 filler[7];
-};
-
-
-/*
- * BUF_CTRL - This per channel structure contains
- * all Tx and Rx buffer control for a given channel.
- */
-
-struct BUF_CTRL {
- __u32 flag_dma; /* buffers are in Host memory */
- __u32 tx_bufaddr; /* address of the tx buffer */
- __u32 tx_bufsize; /* tx buffer size */
- __u32 tx_threshold; /* tx low water mark */
- __u32 tx_get; /* tail index tx buf */
- __u32 tx_put; /* head index tx buf */
- __u32 rx_bufaddr; /* address of the rx buffer */
- __u32 rx_bufsize; /* rx buffer size */
- __u32 rx_threshold; /* rx high water mark */
- __u32 rx_get; /* tail index rx buf */
- __u32 rx_put; /* head index rx buf */
- __u32 filler[5]; /* filler to align structures */
-};
-
-/*
- * BOARD_CTRL - This per board structure contains all global
- * control fields related to the board.
- */
-
-struct BOARD_CTRL {
-
- /* static info provided by the on-board CPU */
- __u32 n_channel; /* number of channels */
- __u32 fw_version; /* firmware version */
-
- /* static info provided by the driver */
- __u32 op_system; /* op_system id */
- __u32 dr_version; /* driver version */
-
- /* board control area */
- __u32 inactivity; /* inactivity control */
-
- /* host to FW commands */
- __u32 hcmd_channel; /* channel number */
- __u32 hcmd_param; /* pointer to parameters */
-
- /* FW to Host commands */
- __u32 fwcmd_channel; /* channel number */
- __u32 fwcmd_param; /* pointer to parameters */
- __u32 zf_int_queue_addr; /* offset for INT_QUEUE structure */
-
- /* filler so the structures are aligned */
- __u32 filler[6];
-};
-
-/* Host Interrupt Queue */
-
-#define QUEUE_SIZE (10*MAX_CHAN)
-
-struct INT_QUEUE {
- unsigned char intr_code[QUEUE_SIZE];
- unsigned long channel[QUEUE_SIZE];
- unsigned long param[QUEUE_SIZE];
- unsigned long put;
- unsigned long get;
-};
-
-/*
- * ZFW_CTRL - This is the data structure that includes all other
- * data structures used by the Firmware.
- */
-
-struct ZFW_CTRL {
- struct BOARD_CTRL board_ctrl;
- struct CH_CTRL ch_ctrl[MAX_CHAN];
- struct BUF_CTRL buf_ctrl[MAX_CHAN];
-};
-
-/****************** ****************** *******************/
-#endif
+#include <uapi/linux/cyclades.h>
-#ifdef __KERNEL__
/* Per card data structure */
struct cyclades_card {
@@ -780,5 +357,4 @@
/***************************************************************************/
-#endif /* __KERNEL__ */
#endif /* _LINUX_CYCLADES_H */
diff --git a/include/linux/dccp.h b/include/linux/dccp.h
index d16294e..439ff69 100644
--- a/include/linux/dccp.h
+++ b/include/linux/dccp.h
@@ -1,239 +1,6 @@
#ifndef _LINUX_DCCP_H
#define _LINUX_DCCP_H
-#include <linux/types.h>
-#include <asm/byteorder.h>
-
-/**
- * struct dccp_hdr - generic part of DCCP packet header
- *
- * @dccph_sport - Relevant port on the endpoint that sent this packet
- * @dccph_dport - Relevant port on the other endpoint
- * @dccph_doff - Data Offset from the start of the DCCP header, in 32-bit words
- * @dccph_ccval - Used by the HC-Sender CCID
- * @dccph_cscov - Parts of the packet that are covered by the Checksum field
- * @dccph_checksum - Internet checksum, depends on dccph_cscov
- * @dccph_x - 0 = 24 bit sequence number, 1 = 48
- * @dccph_type - packet type, see DCCP_PKT_ prefixed macros
- * @dccph_seq - sequence number high or low order 24 bits, depends on dccph_x
- */
-struct dccp_hdr {
- __be16 dccph_sport,
- dccph_dport;
- __u8 dccph_doff;
-#if defined(__LITTLE_ENDIAN_BITFIELD)
- __u8 dccph_cscov:4,
- dccph_ccval:4;
-#elif defined(__BIG_ENDIAN_BITFIELD)
- __u8 dccph_ccval:4,
- dccph_cscov:4;
-#else
-#error "Adjust your <asm/byteorder.h> defines"
-#endif
- __sum16 dccph_checksum;
-#if defined(__LITTLE_ENDIAN_BITFIELD)
- __u8 dccph_x:1,
- dccph_type:4,
- dccph_reserved:3;
-#elif defined(__BIG_ENDIAN_BITFIELD)
- __u8 dccph_reserved:3,
- dccph_type:4,
- dccph_x:1;
-#else
-#error "Adjust your <asm/byteorder.h> defines"
-#endif
- __u8 dccph_seq2;
- __be16 dccph_seq;
-};
-
-/**
- * struct dccp_hdr_ext - the low bits of a 48 bit seq packet
- *
- * @dccph_seq_low - low 24 bits of a 48 bit seq packet
- */
-struct dccp_hdr_ext {
- __be32 dccph_seq_low;
-};
-
-/**
- * struct dccp_hdr_request - Connection initiation request header
- *
- * @dccph_req_service - Service to which the client app wants to connect
- */
-struct dccp_hdr_request {
- __be32 dccph_req_service;
-};
-/**
- * struct dccp_hdr_ack_bits - acknowledgment bits common to most packets
- *
- * @dccph_resp_ack_nr_high - 48 bit ack number high order bits, contains GSR
- * @dccph_resp_ack_nr_low - 48 bit ack number low order bits, contains GSR
- */
-struct dccp_hdr_ack_bits {
- __be16 dccph_reserved1;
- __be16 dccph_ack_nr_high;
- __be32 dccph_ack_nr_low;
-};
-/**
- * struct dccp_hdr_response - Connection initiation response header
- *
- * @dccph_resp_ack - 48 bit Acknowledgment Number Subheader (5.3)
- * @dccph_resp_service - Echoes the Service Code on a received DCCP-Request
- */
-struct dccp_hdr_response {
- struct dccp_hdr_ack_bits dccph_resp_ack;
- __be32 dccph_resp_service;
-};
-
-/**
- * struct dccp_hdr_reset - Unconditionally shut down a connection
- *
- * @dccph_reset_ack - 48 bit Acknowledgment Number Subheader (5.6)
- * @dccph_reset_code - one of %dccp_reset_codes
- * @dccph_reset_data - the Data 1 ... Data 3 fields from 5.6
- */
-struct dccp_hdr_reset {
- struct dccp_hdr_ack_bits dccph_reset_ack;
- __u8 dccph_reset_code,
- dccph_reset_data[3];
-};
-
-enum dccp_pkt_type {
- DCCP_PKT_REQUEST = 0,
- DCCP_PKT_RESPONSE,
- DCCP_PKT_DATA,
- DCCP_PKT_ACK,
- DCCP_PKT_DATAACK,
- DCCP_PKT_CLOSEREQ,
- DCCP_PKT_CLOSE,
- DCCP_PKT_RESET,
- DCCP_PKT_SYNC,
- DCCP_PKT_SYNCACK,
- DCCP_PKT_INVALID,
-};
-
-#define DCCP_NR_PKT_TYPES DCCP_PKT_INVALID
-
-static inline unsigned int dccp_packet_hdr_len(const __u8 type)
-{
- if (type == DCCP_PKT_DATA)
- return 0;
- if (type == DCCP_PKT_DATAACK ||
- type == DCCP_PKT_ACK ||
- type == DCCP_PKT_SYNC ||
- type == DCCP_PKT_SYNCACK ||
- type == DCCP_PKT_CLOSE ||
- type == DCCP_PKT_CLOSEREQ)
- return sizeof(struct dccp_hdr_ack_bits);
- if (type == DCCP_PKT_REQUEST)
- return sizeof(struct dccp_hdr_request);
- if (type == DCCP_PKT_RESPONSE)
- return sizeof(struct dccp_hdr_response);
- return sizeof(struct dccp_hdr_reset);
-}
-enum dccp_reset_codes {
- DCCP_RESET_CODE_UNSPECIFIED = 0,
- DCCP_RESET_CODE_CLOSED,
- DCCP_RESET_CODE_ABORTED,
- DCCP_RESET_CODE_NO_CONNECTION,
- DCCP_RESET_CODE_PACKET_ERROR,
- DCCP_RESET_CODE_OPTION_ERROR,
- DCCP_RESET_CODE_MANDATORY_ERROR,
- DCCP_RESET_CODE_CONNECTION_REFUSED,
- DCCP_RESET_CODE_BAD_SERVICE_CODE,
- DCCP_RESET_CODE_TOO_BUSY,
- DCCP_RESET_CODE_BAD_INIT_COOKIE,
- DCCP_RESET_CODE_AGGRESSION_PENALTY,
-
- DCCP_MAX_RESET_CODES /* Leave at the end! */
-};
-
-/* DCCP options */
-enum {
- DCCPO_PADDING = 0,
- DCCPO_MANDATORY = 1,
- DCCPO_MIN_RESERVED = 3,
- DCCPO_MAX_RESERVED = 31,
- DCCPO_CHANGE_L = 32,
- DCCPO_CONFIRM_L = 33,
- DCCPO_CHANGE_R = 34,
- DCCPO_CONFIRM_R = 35,
- DCCPO_NDP_COUNT = 37,
- DCCPO_ACK_VECTOR_0 = 38,
- DCCPO_ACK_VECTOR_1 = 39,
- DCCPO_TIMESTAMP = 41,
- DCCPO_TIMESTAMP_ECHO = 42,
- DCCPO_ELAPSED_TIME = 43,
- DCCPO_MAX = 45,
- DCCPO_MIN_RX_CCID_SPECIFIC = 128, /* from sender to receiver */
- DCCPO_MAX_RX_CCID_SPECIFIC = 191,
- DCCPO_MIN_TX_CCID_SPECIFIC = 192, /* from receiver to sender */
- DCCPO_MAX_TX_CCID_SPECIFIC = 255,
-};
-/* maximum size of a single TLV-encoded DCCP option (sans type/len bytes) */
-#define DCCP_SINGLE_OPT_MAXLEN 253
-
-/* DCCP CCIDS */
-enum {
- DCCPC_CCID2 = 2,
- DCCPC_CCID3 = 3,
-};
-
-/* DCCP features (RFC 4340 section 6.4) */
-enum dccp_feature_numbers {
- DCCPF_RESERVED = 0,
- DCCPF_CCID = 1,
- DCCPF_SHORT_SEQNOS = 2,
- DCCPF_SEQUENCE_WINDOW = 3,
- DCCPF_ECN_INCAPABLE = 4,
- DCCPF_ACK_RATIO = 5,
- DCCPF_SEND_ACK_VECTOR = 6,
- DCCPF_SEND_NDP_COUNT = 7,
- DCCPF_MIN_CSUM_COVER = 8,
- DCCPF_DATA_CHECKSUM = 9,
- /* 10-127 reserved */
- DCCPF_MIN_CCID_SPECIFIC = 128,
- DCCPF_SEND_LEV_RATE = 192, /* RFC 4342, sec. 8.4 */
- DCCPF_MAX_CCID_SPECIFIC = 255,
-};
-
-/* DCCP socket control message types for cmsg */
-enum dccp_cmsg_type {
- DCCP_SCM_PRIORITY = 1,
- DCCP_SCM_QPOLICY_MAX = 0xFFFF,
- /* ^-- Up to here reserved exclusively for qpolicy parameters */
- DCCP_SCM_MAX
-};
-
-/* DCCP priorities for outgoing/queued packets */
-enum dccp_packet_dequeueing_policy {
- DCCPQ_POLICY_SIMPLE,
- DCCPQ_POLICY_PRIO,
- DCCPQ_POLICY_MAX
-};
-
-/* DCCP socket options */
-#define DCCP_SOCKOPT_PACKET_SIZE 1 /* XXX deprecated, without effect */
-#define DCCP_SOCKOPT_SERVICE 2
-#define DCCP_SOCKOPT_CHANGE_L 3
-#define DCCP_SOCKOPT_CHANGE_R 4
-#define DCCP_SOCKOPT_GET_CUR_MPS 5
-#define DCCP_SOCKOPT_SERVER_TIMEWAIT 6
-#define DCCP_SOCKOPT_SEND_CSCOV 10
-#define DCCP_SOCKOPT_RECV_CSCOV 11
-#define DCCP_SOCKOPT_AVAILABLE_CCIDS 12
-#define DCCP_SOCKOPT_CCID 13
-#define DCCP_SOCKOPT_TX_CCID 14
-#define DCCP_SOCKOPT_RX_CCID 15
-#define DCCP_SOCKOPT_QPOLICY_ID 16
-#define DCCP_SOCKOPT_QPOLICY_TXQLEN 17
-#define DCCP_SOCKOPT_CCID_RX_INFO 128
-#define DCCP_SOCKOPT_CCID_TX_INFO 192
-
-/* maximum number of services provided on the same listening port */
-#define DCCP_SERVICE_LIST_MAX_LEN 32
-
-#ifdef __KERNEL__
#include <linux/in.h>
#include <linux/interrupt.h>
@@ -246,6 +13,7 @@
#include <net/inet_sock.h>
#include <net/inet_timewait_sock.h>
#include <net/tcp_states.h>
+#include <uapi/linux/dccp.h>
enum dccp_state {
DCCP_OPEN = TCP_ESTABLISHED,
@@ -551,6 +319,4 @@
extern void dccp_syn_ack_timeout(struct sock *sk, struct request_sock *req);
-#endif /* __KERNEL__ */
-
#endif /* _LINUX_DCCP_H */
diff --git a/include/linux/dlm.h b/include/linux/dlm.h
index 5201524..1d47dcc 100644
--- a/include/linux/dlm.h
+++ b/include/linux/dlm.h
@@ -10,68 +10,11 @@
**
*******************************************************************************
******************************************************************************/
-
#ifndef __DLM_DOT_H__
#define __DLM_DOT_H__
-/*
- * Interface to Distributed Lock Manager (DLM)
- * routines and structures to use DLM lockspaces
- */
+#include <uapi/linux/dlm.h>
-/* Lock levels and flags are here */
-#include <linux/dlmconstants.h>
-#include <linux/types.h>
-
-typedef void dlm_lockspace_t;
-
-/*
- * Lock status block
- *
- * Use this structure to specify the contents of the lock value block. For a
- * conversion request, this structure is used to specify the lock ID of the
- * lock. DLM writes the status of the lock request and the lock ID assigned
- * to the request in the lock status block.
- *
- * sb_lkid: the returned lock ID. It is set on new (non-conversion) requests.
- * It is available when dlm_lock returns.
- *
- * sb_lvbptr: saves or returns the contents of the lock's LVB according to rules
- * shown for the DLM_LKF_VALBLK flag.
- *
- * sb_flags: DLM_SBF_DEMOTED is returned if in the process of promoting a lock,
- * it was first demoted to NL to avoid conversion deadlock.
- * DLM_SBF_VALNOTVALID is returned if the resource's LVB is marked invalid.
- *
- * sb_status: the returned status of the lock request set prior to AST
- * execution. Possible return values:
- *
- * 0 if lock request was successful
- * -EAGAIN if request would block and is flagged DLM_LKF_NOQUEUE
- * -DLM_EUNLOCK if unlock request was successful
- * -DLM_ECANCEL if a cancel completed successfully
- * -EDEADLK if a deadlock was detected
- * -ETIMEDOUT if the lock request was canceled due to a timeout
- */
-
-#define DLM_SBF_DEMOTED 0x01
-#define DLM_SBF_VALNOTVALID 0x02
-#define DLM_SBF_ALTMODE 0x04
-
-struct dlm_lksb {
- int sb_status;
- __u32 sb_lkid;
- char sb_flags;
- char * sb_lvbptr;
-};
-
-/* dlm_new_lockspace() flags */
-
-#define DLM_LSFL_TIMEWARN 0x00000002
-#define DLM_LSFL_FS 0x00000004
-#define DLM_LSFL_NEWEXCL 0x00000008
-
-#ifdef __KERNEL__
struct dlm_slot {
int nodeid; /* 1 to MAX_INT */
@@ -226,7 +169,4 @@
struct dlm_lksb *lksb,
void *astarg);
-#endif /* __KERNEL__ */
-
#endif /* __DLM_DOT_H__ */
-
diff --git a/include/linux/dlm_plock.h b/include/linux/dlm_plock.h
index 3b1cc1b..95ad387 100644
--- a/include/linux/dlm_plock.h
+++ b/include/linux/dlm_plock.h
@@ -5,50 +5,15 @@
* modify, copy, or redistribute it subject to the terms and conditions
* of the GNU General Public License v.2.
*/
-
#ifndef __DLM_PLOCK_DOT_H__
#define __DLM_PLOCK_DOT_H__
-#include <linux/types.h>
+#include <uapi/linux/dlm_plock.h>
-#define DLM_PLOCK_MISC_NAME "dlm_plock"
-
-#define DLM_PLOCK_VERSION_MAJOR 1
-#define DLM_PLOCK_VERSION_MINOR 2
-#define DLM_PLOCK_VERSION_PATCH 0
-
-enum {
- DLM_PLOCK_OP_LOCK = 1,
- DLM_PLOCK_OP_UNLOCK,
- DLM_PLOCK_OP_GET,
-};
-
-#define DLM_PLOCK_FL_CLOSE 1
-
-struct dlm_plock_info {
- __u32 version[3];
- __u8 optype;
- __u8 ex;
- __u8 wait;
- __u8 flags;
- __u32 pid;
- __s32 nodeid;
- __s32 rv;
- __u32 fsid;
- __u64 number;
- __u64 start;
- __u64 end;
- __u64 owner;
-};
-
-#ifdef __KERNEL__
int dlm_posix_lock(dlm_lockspace_t *lockspace, u64 number, struct file *file,
int cmd, struct file_lock *fl);
int dlm_posix_unlock(dlm_lockspace_t *lockspace, u64 number, struct file *file,
struct file_lock *fl);
int dlm_posix_get(dlm_lockspace_t *lockspace, u64 number, struct file *file,
struct file_lock *fl);
-#endif /* __KERNEL__ */
-
#endif
-
diff --git a/include/linux/edd.h b/include/linux/edd.h
index 4cbd0fe..83d4371 100644
--- a/include/linux/edd.h
+++ b/include/linux/edd.h
@@ -30,165 +30,9 @@
#ifndef _LINUX_EDD_H
#define _LINUX_EDD_H
-#include <linux/types.h>
-
-#define EDDNR 0x1e9 /* addr of number of edd_info structs at EDDBUF
- in boot_params - treat this as 1 byte */
-#define EDDBUF 0xd00 /* addr of edd_info structs in boot_params */
-#define EDDMAXNR 6 /* number of edd_info structs starting at EDDBUF */
-#define EDDEXTSIZE 8 /* change these if you muck with the structures */
-#define EDDPARMSIZE 74
-#define CHECKEXTENSIONSPRESENT 0x41
-#define GETDEVICEPARAMETERS 0x48
-#define LEGACYGETDEVICEPARAMETERS 0x08
-#define EDDMAGIC1 0x55AA
-#define EDDMAGIC2 0xAA55
-
-
-#define READ_SECTORS 0x02 /* int13 AH=0x02 is READ_SECTORS command */
-#define EDD_MBR_SIG_OFFSET 0x1B8 /* offset of signature in the MBR */
-#define EDD_MBR_SIG_BUF 0x290 /* addr in boot params */
-#define EDD_MBR_SIG_MAX 16 /* max number of signatures to store */
-#define EDD_MBR_SIG_NR_BUF 0x1ea /* addr of number of MBR signtaures at EDD_MBR_SIG_BUF
- in boot_params - treat this as 1 byte */
+#include <uapi/linux/edd.h>
#ifndef __ASSEMBLY__
-
-#define EDD_EXT_FIXED_DISK_ACCESS (1 << 0)
-#define EDD_EXT_DEVICE_LOCKING_AND_EJECTING (1 << 1)
-#define EDD_EXT_ENHANCED_DISK_DRIVE_SUPPORT (1 << 2)
-#define EDD_EXT_64BIT_EXTENSIONS (1 << 3)
-
-#define EDD_INFO_DMA_BOUNDARY_ERROR_TRANSPARENT (1 << 0)
-#define EDD_INFO_GEOMETRY_VALID (1 << 1)
-#define EDD_INFO_REMOVABLE (1 << 2)
-#define EDD_INFO_WRITE_VERIFY (1 << 3)
-#define EDD_INFO_MEDIA_CHANGE_NOTIFICATION (1 << 4)
-#define EDD_INFO_LOCKABLE (1 << 5)
-#define EDD_INFO_NO_MEDIA_PRESENT (1 << 6)
-#define EDD_INFO_USE_INT13_FN50 (1 << 7)
-
-struct edd_device_params {
- __u16 length;
- __u16 info_flags;
- __u32 num_default_cylinders;
- __u32 num_default_heads;
- __u32 sectors_per_track;
- __u64 number_of_sectors;
- __u16 bytes_per_sector;
- __u32 dpte_ptr; /* 0xFFFFFFFF for our purposes */
- __u16 key; /* = 0xBEDD */
- __u8 device_path_info_length; /* = 44 */
- __u8 reserved2;
- __u16 reserved3;
- __u8 host_bus_type[4];
- __u8 interface_type[8];
- union {
- struct {
- __u16 base_address;
- __u16 reserved1;
- __u32 reserved2;
- } __attribute__ ((packed)) isa;
- struct {
- __u8 bus;
- __u8 slot;
- __u8 function;
- __u8 channel;
- __u32 reserved;
- } __attribute__ ((packed)) pci;
- /* pcix is same as pci */
- struct {
- __u64 reserved;
- } __attribute__ ((packed)) ibnd;
- struct {
- __u64 reserved;
- } __attribute__ ((packed)) xprs;
- struct {
- __u64 reserved;
- } __attribute__ ((packed)) htpt;
- struct {
- __u64 reserved;
- } __attribute__ ((packed)) unknown;
- } interface_path;
- union {
- struct {
- __u8 device;
- __u8 reserved1;
- __u16 reserved2;
- __u32 reserved3;
- __u64 reserved4;
- } __attribute__ ((packed)) ata;
- struct {
- __u8 device;
- __u8 lun;
- __u8 reserved1;
- __u8 reserved2;
- __u32 reserved3;
- __u64 reserved4;
- } __attribute__ ((packed)) atapi;
- struct {
- __u16 id;
- __u64 lun;
- __u16 reserved1;
- __u32 reserved2;
- } __attribute__ ((packed)) scsi;
- struct {
- __u64 serial_number;
- __u64 reserved;
- } __attribute__ ((packed)) usb;
- struct {
- __u64 eui;
- __u64 reserved;
- } __attribute__ ((packed)) i1394;
- struct {
- __u64 wwid;
- __u64 lun;
- } __attribute__ ((packed)) fibre;
- struct {
- __u64 identity_tag;
- __u64 reserved;
- } __attribute__ ((packed)) i2o;
- struct {
- __u32 array_number;
- __u32 reserved1;
- __u64 reserved2;
- } __attribute__ ((packed)) raid;
- struct {
- __u8 device;
- __u8 reserved1;
- __u16 reserved2;
- __u32 reserved3;
- __u64 reserved4;
- } __attribute__ ((packed)) sata;
- struct {
- __u64 reserved1;
- __u64 reserved2;
- } __attribute__ ((packed)) unknown;
- } device_path;
- __u8 reserved4;
- __u8 checksum;
-} __attribute__ ((packed));
-
-struct edd_info {
- __u8 device;
- __u8 version;
- __u16 interface_support;
- __u16 legacy_max_cylinder;
- __u8 legacy_max_head;
- __u8 legacy_sectors_per_track;
- struct edd_device_params params;
-} __attribute__ ((packed));
-
-struct edd {
- unsigned int mbr_signature[EDD_MBR_SIG_MAX];
- struct edd_info edd_info[EDDMAXNR];
- unsigned char mbr_signature_nr;
- unsigned char edd_info_nr;
-};
-
-#ifdef __KERNEL__
extern struct edd edd;
-#endif /* __KERNEL__ */
#endif /*!__ASSEMBLY__ */
-
#endif /* _LINUX_EDD_H */
diff --git a/include/linux/elf.h b/include/linux/elf.h
index 59ef406..8c9048e 100644
--- a/include/linux/elf.h
+++ b/include/linux/elf.h
@@ -1,420 +1,9 @@
#ifndef _LINUX_ELF_H
#define _LINUX_ELF_H
-#include <linux/types.h>
-#include <linux/elf-em.h>
-#ifdef __KERNEL__
#include <asm/elf.h>
-#endif
+#include <uapi/linux/elf.h>
-/* 32-bit ELF base types. */
-typedef __u32 Elf32_Addr;
-typedef __u16 Elf32_Half;
-typedef __u32 Elf32_Off;
-typedef __s32 Elf32_Sword;
-typedef __u32 Elf32_Word;
-
-/* 64-bit ELF base types. */
-typedef __u64 Elf64_Addr;
-typedef __u16 Elf64_Half;
-typedef __s16 Elf64_SHalf;
-typedef __u64 Elf64_Off;
-typedef __s32 Elf64_Sword;
-typedef __u32 Elf64_Word;
-typedef __u64 Elf64_Xword;
-typedef __s64 Elf64_Sxword;
-
-/* These constants are for the segment types stored in the image headers */
-#define PT_NULL 0
-#define PT_LOAD 1
-#define PT_DYNAMIC 2
-#define PT_INTERP 3
-#define PT_NOTE 4
-#define PT_SHLIB 5
-#define PT_PHDR 6
-#define PT_TLS 7 /* Thread local storage segment */
-#define PT_LOOS 0x60000000 /* OS-specific */
-#define PT_HIOS 0x6fffffff /* OS-specific */
-#define PT_LOPROC 0x70000000
-#define PT_HIPROC 0x7fffffff
-#define PT_GNU_EH_FRAME 0x6474e550
-
-#define PT_GNU_STACK (PT_LOOS + 0x474e551)
-
-/*
- * Extended Numbering
- *
- * If the real number of program header table entries is larger than
- * or equal to PN_XNUM(0xffff), it is set to sh_info field of the
- * section header at index 0, and PN_XNUM is set to e_phnum
- * field. Otherwise, the section header at index 0 is zero
- * initialized, if it exists.
- *
- * Specifications are available in:
- *
- * - Sun microsystems: Linker and Libraries.
- * Part No: 817-1984-17, September 2008.
- * URL: http://docs.sun.com/app/docs/doc/817-1984
- *
- * - System V ABI AMD64 Architecture Processor Supplement
- * Draft Version 0.99.,
- * May 11, 2009.
- * URL: http://www.x86-64.org/
- */
-#define PN_XNUM 0xffff
-
-/* These constants define the different elf file types */
-#define ET_NONE 0
-#define ET_REL 1
-#define ET_EXEC 2
-#define ET_DYN 3
-#define ET_CORE 4
-#define ET_LOPROC 0xff00
-#define ET_HIPROC 0xffff
-
-/* This is the info that is needed to parse the dynamic section of the file */
-#define DT_NULL 0
-#define DT_NEEDED 1
-#define DT_PLTRELSZ 2
-#define DT_PLTGOT 3
-#define DT_HASH 4
-#define DT_STRTAB 5
-#define DT_SYMTAB 6
-#define DT_RELA 7
-#define DT_RELASZ 8
-#define DT_RELAENT 9
-#define DT_STRSZ 10
-#define DT_SYMENT 11
-#define DT_INIT 12
-#define DT_FINI 13
-#define DT_SONAME 14
-#define DT_RPATH 15
-#define DT_SYMBOLIC 16
-#define DT_REL 17
-#define DT_RELSZ 18
-#define DT_RELENT 19
-#define DT_PLTREL 20
-#define DT_DEBUG 21
-#define DT_TEXTREL 22
-#define DT_JMPREL 23
-#define DT_ENCODING 32
-#define OLD_DT_LOOS 0x60000000
-#define DT_LOOS 0x6000000d
-#define DT_HIOS 0x6ffff000
-#define DT_VALRNGLO 0x6ffffd00
-#define DT_VALRNGHI 0x6ffffdff
-#define DT_ADDRRNGLO 0x6ffffe00
-#define DT_ADDRRNGHI 0x6ffffeff
-#define DT_VERSYM 0x6ffffff0
-#define DT_RELACOUNT 0x6ffffff9
-#define DT_RELCOUNT 0x6ffffffa
-#define DT_FLAGS_1 0x6ffffffb
-#define DT_VERDEF 0x6ffffffc
-#define DT_VERDEFNUM 0x6ffffffd
-#define DT_VERNEED 0x6ffffffe
-#define DT_VERNEEDNUM 0x6fffffff
-#define OLD_DT_HIOS 0x6fffffff
-#define DT_LOPROC 0x70000000
-#define DT_HIPROC 0x7fffffff
-
-/* This info is needed when parsing the symbol table */
-#define STB_LOCAL 0
-#define STB_GLOBAL 1
-#define STB_WEAK 2
-
-#define STT_NOTYPE 0
-#define STT_OBJECT 1
-#define STT_FUNC 2
-#define STT_SECTION 3
-#define STT_FILE 4
-#define STT_COMMON 5
-#define STT_TLS 6
-
-#define ELF_ST_BIND(x) ((x) >> 4)
-#define ELF_ST_TYPE(x) (((unsigned int) x) & 0xf)
-#define ELF32_ST_BIND(x) ELF_ST_BIND(x)
-#define ELF32_ST_TYPE(x) ELF_ST_TYPE(x)
-#define ELF64_ST_BIND(x) ELF_ST_BIND(x)
-#define ELF64_ST_TYPE(x) ELF_ST_TYPE(x)
-
-typedef struct dynamic{
- Elf32_Sword d_tag;
- union{
- Elf32_Sword d_val;
- Elf32_Addr d_ptr;
- } d_un;
-} Elf32_Dyn;
-
-typedef struct {
- Elf64_Sxword d_tag; /* entry tag value */
- union {
- Elf64_Xword d_val;
- Elf64_Addr d_ptr;
- } d_un;
-} Elf64_Dyn;
-
-/* The following are used with relocations */
-#define ELF32_R_SYM(x) ((x) >> 8)
-#define ELF32_R_TYPE(x) ((x) & 0xff)
-
-#define ELF64_R_SYM(i) ((i) >> 32)
-#define ELF64_R_TYPE(i) ((i) & 0xffffffff)
-
-typedef struct elf32_rel {
- Elf32_Addr r_offset;
- Elf32_Word r_info;
-} Elf32_Rel;
-
-typedef struct elf64_rel {
- Elf64_Addr r_offset; /* Location at which to apply the action */
- Elf64_Xword r_info; /* index and type of relocation */
-} Elf64_Rel;
-
-typedef struct elf32_rela{
- Elf32_Addr r_offset;
- Elf32_Word r_info;
- Elf32_Sword r_addend;
-} Elf32_Rela;
-
-typedef struct elf64_rela {
- Elf64_Addr r_offset; /* Location at which to apply the action */
- Elf64_Xword r_info; /* index and type of relocation */
- Elf64_Sxword r_addend; /* Constant addend used to compute value */
-} Elf64_Rela;
-
-typedef struct elf32_sym{
- Elf32_Word st_name;
- Elf32_Addr st_value;
- Elf32_Word st_size;
- unsigned char st_info;
- unsigned char st_other;
- Elf32_Half st_shndx;
-} Elf32_Sym;
-
-typedef struct elf64_sym {
- Elf64_Word st_name; /* Symbol name, index in string tbl */
- unsigned char st_info; /* Type and binding attributes */
- unsigned char st_other; /* No defined meaning, 0 */
- Elf64_Half st_shndx; /* Associated section index */
- Elf64_Addr st_value; /* Value of the symbol */
- Elf64_Xword st_size; /* Associated symbol size */
-} Elf64_Sym;
-
-
-#define EI_NIDENT 16
-
-typedef struct elf32_hdr{
- unsigned char e_ident[EI_NIDENT];
- Elf32_Half e_type;
- Elf32_Half e_machine;
- Elf32_Word e_version;
- Elf32_Addr e_entry; /* Entry point */
- Elf32_Off e_phoff;
- Elf32_Off e_shoff;
- Elf32_Word e_flags;
- Elf32_Half e_ehsize;
- Elf32_Half e_phentsize;
- Elf32_Half e_phnum;
- Elf32_Half e_shentsize;
- Elf32_Half e_shnum;
- Elf32_Half e_shstrndx;
-} Elf32_Ehdr;
-
-typedef struct elf64_hdr {
- unsigned char e_ident[EI_NIDENT]; /* ELF "magic number" */
- Elf64_Half e_type;
- Elf64_Half e_machine;
- Elf64_Word e_version;
- Elf64_Addr e_entry; /* Entry point virtual address */
- Elf64_Off e_phoff; /* Program header table file offset */
- Elf64_Off e_shoff; /* Section header table file offset */
- Elf64_Word e_flags;
- Elf64_Half e_ehsize;
- Elf64_Half e_phentsize;
- Elf64_Half e_phnum;
- Elf64_Half e_shentsize;
- Elf64_Half e_shnum;
- Elf64_Half e_shstrndx;
-} Elf64_Ehdr;
-
-/* These constants define the permissions on sections in the program
- header, p_flags. */
-#define PF_R 0x4
-#define PF_W 0x2
-#define PF_X 0x1
-
-typedef struct elf32_phdr{
- Elf32_Word p_type;
- Elf32_Off p_offset;
- Elf32_Addr p_vaddr;
- Elf32_Addr p_paddr;
- Elf32_Word p_filesz;
- Elf32_Word p_memsz;
- Elf32_Word p_flags;
- Elf32_Word p_align;
-} Elf32_Phdr;
-
-typedef struct elf64_phdr {
- Elf64_Word p_type;
- Elf64_Word p_flags;
- Elf64_Off p_offset; /* Segment file offset */
- Elf64_Addr p_vaddr; /* Segment virtual address */
- Elf64_Addr p_paddr; /* Segment physical address */
- Elf64_Xword p_filesz; /* Segment size in file */
- Elf64_Xword p_memsz; /* Segment size in memory */
- Elf64_Xword p_align; /* Segment alignment, file & memory */
-} Elf64_Phdr;
-
-/* sh_type */
-#define SHT_NULL 0
-#define SHT_PROGBITS 1
-#define SHT_SYMTAB 2
-#define SHT_STRTAB 3
-#define SHT_RELA 4
-#define SHT_HASH 5
-#define SHT_DYNAMIC 6
-#define SHT_NOTE 7
-#define SHT_NOBITS 8
-#define SHT_REL 9
-#define SHT_SHLIB 10
-#define SHT_DYNSYM 11
-#define SHT_NUM 12
-#define SHT_LOPROC 0x70000000
-#define SHT_HIPROC 0x7fffffff
-#define SHT_LOUSER 0x80000000
-#define SHT_HIUSER 0xffffffff
-
-/* sh_flags */
-#define SHF_WRITE 0x1
-#define SHF_ALLOC 0x2
-#define SHF_EXECINSTR 0x4
-#define SHF_MASKPROC 0xf0000000
-
-/* special section indexes */
-#define SHN_UNDEF 0
-#define SHN_LORESERVE 0xff00
-#define SHN_LOPROC 0xff00
-#define SHN_HIPROC 0xff1f
-#define SHN_ABS 0xfff1
-#define SHN_COMMON 0xfff2
-#define SHN_HIRESERVE 0xffff
-
-typedef struct elf32_shdr {
- Elf32_Word sh_name;
- Elf32_Word sh_type;
- Elf32_Word sh_flags;
- Elf32_Addr sh_addr;
- Elf32_Off sh_offset;
- Elf32_Word sh_size;
- Elf32_Word sh_link;
- Elf32_Word sh_info;
- Elf32_Word sh_addralign;
- Elf32_Word sh_entsize;
-} Elf32_Shdr;
-
-typedef struct elf64_shdr {
- Elf64_Word sh_name; /* Section name, index in string tbl */
- Elf64_Word sh_type; /* Type of section */
- Elf64_Xword sh_flags; /* Miscellaneous section attributes */
- Elf64_Addr sh_addr; /* Section virtual addr at execution */
- Elf64_Off sh_offset; /* Section file offset */
- Elf64_Xword sh_size; /* Size of section in bytes */
- Elf64_Word sh_link; /* Index of another section */
- Elf64_Word sh_info; /* Additional section information */
- Elf64_Xword sh_addralign; /* Section alignment */
- Elf64_Xword sh_entsize; /* Entry size if section holds table */
-} Elf64_Shdr;
-
-#define EI_MAG0 0 /* e_ident[] indexes */
-#define EI_MAG1 1
-#define EI_MAG2 2
-#define EI_MAG3 3
-#define EI_CLASS 4
-#define EI_DATA 5
-#define EI_VERSION 6
-#define EI_OSABI 7
-#define EI_PAD 8
-
-#define ELFMAG0 0x7f /* EI_MAG */
-#define ELFMAG1 'E'
-#define ELFMAG2 'L'
-#define ELFMAG3 'F'
-#define ELFMAG "\177ELF"
-#define SELFMAG 4
-
-#define ELFCLASSNONE 0 /* EI_CLASS */
-#define ELFCLASS32 1
-#define ELFCLASS64 2
-#define ELFCLASSNUM 3
-
-#define ELFDATANONE 0 /* e_ident[EI_DATA] */
-#define ELFDATA2LSB 1
-#define ELFDATA2MSB 2
-
-#define EV_NONE 0 /* e_version, EI_VERSION */
-#define EV_CURRENT 1
-#define EV_NUM 2
-
-#define ELFOSABI_NONE 0
-#define ELFOSABI_LINUX 3
-
-#ifndef ELF_OSABI
-#define ELF_OSABI ELFOSABI_NONE
-#endif
-
-/*
- * Notes used in ET_CORE. Architectures export some of the arch register sets
- * using the corresponding note types via the PTRACE_GETREGSET and
- * PTRACE_SETREGSET requests.
- */
-#define NT_PRSTATUS 1
-#define NT_PRFPREG 2
-#define NT_PRPSINFO 3
-#define NT_TASKSTRUCT 4
-#define NT_AUXV 6
-/*
- * Note to userspace developers: size of NT_SIGINFO note may increase
- * in the future to accomodate more fields, don't assume it is fixed!
- */
-#define NT_SIGINFO 0x53494749
-#define NT_FILE 0x46494c45
-#define NT_PRXFPREG 0x46e62b7f /* copied from gdb5.1/include/elf/common.h */
-#define NT_PPC_VMX 0x100 /* PowerPC Altivec/VMX registers */
-#define NT_PPC_SPE 0x101 /* PowerPC SPE/EVR registers */
-#define NT_PPC_VSX 0x102 /* PowerPC VSX registers */
-#define NT_386_TLS 0x200 /* i386 TLS slots (struct user_desc) */
-#define NT_386_IOPERM 0x201 /* x86 io permission bitmap (1=deny) */
-#define NT_X86_XSTATE 0x202 /* x86 extended state using xsave */
-#define NT_S390_HIGH_GPRS 0x300 /* s390 upper register halves */
-#define NT_S390_TIMER 0x301 /* s390 timer register */
-#define NT_S390_TODCMP 0x302 /* s390 TOD clock comparator register */
-#define NT_S390_TODPREG 0x303 /* s390 TOD programmable register */
-#define NT_S390_CTRS 0x304 /* s390 control registers */
-#define NT_S390_PREFIX 0x305 /* s390 prefix register */
-#define NT_S390_LAST_BREAK 0x306 /* s390 breaking event address */
-#define NT_S390_SYSTEM_CALL 0x307 /* s390 system call restart data */
-#define NT_S390_TDB 0x308 /* s390 transaction diagnostic block */
-#define NT_ARM_VFP 0x400 /* ARM VFP/NEON registers */
-#define NT_ARM_TLS 0x401 /* ARM TLS register */
-#define NT_ARM_HW_BREAK 0x402 /* ARM hardware breakpoint registers */
-#define NT_ARM_HW_WATCH 0x403 /* ARM hardware watchpoint registers */
-
-
-/* Note header in a PT_NOTE section */
-typedef struct elf32_note {
- Elf32_Word n_namesz; /* Name size */
- Elf32_Word n_descsz; /* Content size */
- Elf32_Word n_type; /* Content type */
-} Elf32_Nhdr;
-
-/* Note header in a PT_NOTE section */
-typedef struct elf64_note {
- Elf64_Word n_namesz; /* Name size */
- Elf64_Word n_descsz; /* Content size */
- Elf64_Word n_type; /* Content type */
-} Elf64_Nhdr;
-
-#ifdef __KERNEL__
#ifndef elf_read_implies_exec
/* Executables for which elf_read_implies_exec() returns TRUE will
have the READ_IMPLIES_EXEC personality flag set automatically.
@@ -455,5 +44,4 @@
extern int elf_coredump_extra_notes_size(void);
extern int elf_coredump_extra_notes_write(struct file *file, loff_t *foffset);
#endif
-#endif /* __KERNEL__ */
#endif /* _LINUX_ELF_H */
diff --git a/include/linux/elfcore.h b/include/linux/elfcore.h
index 0698c79..cdd3d13 100644
--- a/include/linux/elfcore.h
+++ b/include/linux/elfcore.h
@@ -1,109 +1,11 @@
#ifndef _LINUX_ELFCORE_H
#define _LINUX_ELFCORE_H
-#include <linux/types.h>
-#include <linux/signal.h>
-#include <linux/time.h>
-#ifdef __KERNEL__
#include <linux/user.h>
#include <linux/bug.h>
-#endif
-#include <linux/ptrace.h>
-#include <linux/elf.h>
-#include <linux/fs.h>
-
-struct elf_siginfo
-{
- int si_signo; /* signal number */
- int si_code; /* extra code */
- int si_errno; /* errno */
-};
-
-#ifdef __KERNEL__
#include <asm/elf.h>
-#endif
+#include <uapi/linux/elfcore.h>
-#ifndef __KERNEL__
-typedef elf_greg_t greg_t;
-typedef elf_gregset_t gregset_t;
-typedef elf_fpregset_t fpregset_t;
-typedef elf_fpxregset_t fpxregset_t;
-#define NGREG ELF_NGREG
-#endif
-
-/*
- * Definitions to generate Intel SVR4-like core files.
- * These mostly have the same names as the SVR4 types with "elf_"
- * tacked on the front to prevent clashes with linux definitions,
- * and the typedef forms have been avoided. This is mostly like
- * the SVR4 structure, but more Linuxy, with things that Linux does
- * not support and which gdb doesn't really use excluded.
- * Fields present but not used are marked with "XXX".
- */
-struct elf_prstatus
-{
-#if 0
- long pr_flags; /* XXX Process flags */
- short pr_why; /* XXX Reason for process halt */
- short pr_what; /* XXX More detailed reason */
-#endif
- struct elf_siginfo pr_info; /* Info associated with signal */
- short pr_cursig; /* Current signal */
- unsigned long pr_sigpend; /* Set of pending signals */
- unsigned long pr_sighold; /* Set of held signals */
-#if 0
- struct sigaltstack pr_altstack; /* Alternate stack info */
- struct sigaction pr_action; /* Signal action for current sig */
-#endif
- pid_t pr_pid;
- pid_t pr_ppid;
- pid_t pr_pgrp;
- pid_t pr_sid;
- struct timeval pr_utime; /* User time */
- struct timeval pr_stime; /* System time */
- struct timeval pr_cutime; /* Cumulative user time */
- struct timeval pr_cstime; /* Cumulative system time */
-#if 0
- long pr_instr; /* Current instruction */
-#endif
- elf_gregset_t pr_reg; /* GP registers */
-#ifdef CONFIG_BINFMT_ELF_FDPIC
- /* When using FDPIC, the loadmap addresses need to be communicated
- * to GDB in order for GDB to do the necessary relocations. The
- * fields (below) used to communicate this information are placed
- * immediately after ``pr_reg'', so that the loadmap addresses may
- * be viewed as part of the register set if so desired.
- */
- unsigned long pr_exec_fdpic_loadmap;
- unsigned long pr_interp_fdpic_loadmap;
-#endif
- int pr_fpvalid; /* True if math co-processor being used. */
-};
-
-#define ELF_PRARGSZ (80) /* Number of chars for args */
-
-struct elf_prpsinfo
-{
- char pr_state; /* numeric process state */
- char pr_sname; /* char for pr_state */
- char pr_zomb; /* zombie */
- char pr_nice; /* nice val */
- unsigned long pr_flag; /* flags */
- __kernel_uid_t pr_uid;
- __kernel_gid_t pr_gid;
- pid_t pr_pid, pr_ppid, pr_pgrp, pr_sid;
- /* Lots missing */
- char pr_fname[16]; /* filename of executable */
- char pr_psargs[ELF_PRARGSZ]; /* initial part of arg list */
-};
-
-#ifndef __KERNEL__
-typedef struct elf_prstatus prstatus_t;
-typedef struct elf_prpsinfo prpsinfo_t;
-#define PRARGSZ ELF_PRARGSZ
-#endif
-
-#ifdef __KERNEL__
static inline void elf_core_copy_regs(elf_gregset_t *elfregs, struct pt_regs *regs)
{
#ifdef ELF_CORE_COPY_REGS
@@ -167,6 +69,4 @@
elf_core_write_extra_data(struct file *file, size_t *size, unsigned long limit);
extern size_t elf_core_extra_data_size(void);
-#endif /* __KERNEL__ */
-
#endif /* _LINUX_ELFCORE_H */
diff --git a/include/linux/errno.h b/include/linux/errno.h
index e0de516..f6bf082 100644
--- a/include/linux/errno.h
+++ b/include/linux/errno.h
@@ -1,9 +1,8 @@
#ifndef _LINUX_ERRNO_H
#define _LINUX_ERRNO_H
-#include <asm/errno.h>
+#include <uapi/linux/errno.h>
-#ifdef __KERNEL__
/*
* These should never be seen by user programs. To return one of ERESTART*
@@ -32,5 +31,3 @@
#define EIOCBRETRY 530 /* iocb queued, will trigger a retry */
#endif
-
-#endif
diff --git a/include/linux/errqueue.h b/include/linux/errqueue.h
index fd0628b..9ca23fc 100644
--- a/include/linux/errqueue.h
+++ b/include/linux/errqueue.h
@@ -1,33 +1,12 @@
#ifndef _LINUX_ERRQUEUE_H
#define _LINUX_ERRQUEUE_H 1
-#include <linux/types.h>
-
-struct sock_extended_err {
- __u32 ee_errno;
- __u8 ee_origin;
- __u8 ee_type;
- __u8 ee_code;
- __u8 ee_pad;
- __u32 ee_info;
- __u32 ee_data;
-};
-
-#define SO_EE_ORIGIN_NONE 0
-#define SO_EE_ORIGIN_LOCAL 1
-#define SO_EE_ORIGIN_ICMP 2
-#define SO_EE_ORIGIN_ICMP6 3
-#define SO_EE_ORIGIN_TXSTATUS 4
-#define SO_EE_ORIGIN_TIMESTAMPING SO_EE_ORIGIN_TXSTATUS
-
-#define SO_EE_OFFENDER(ee) ((struct sockaddr*)((ee)+1))
-
-#ifdef __KERNEL__
#include <net/ip.h>
#if IS_ENABLED(CONFIG_IPV6)
#include <linux/ipv6.h>
#endif
+#include <uapi/linux/errqueue.h>
#define SKB_EXT_ERR(skb) ((struct sock_exterr_skb *) ((skb)->cb))
@@ -44,5 +23,3 @@
};
#endif
-
-#endif
diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h
index fcb4f8e..c8e3e7e3 100644
--- a/include/linux/ethtool.h
+++ b/include/linux/ethtool.h
@@ -9,596 +9,12 @@
* scott.feldman@intel.com)
* Portions Copyright (C) Sun Microsystems 2008
*/
-
#ifndef _LINUX_ETHTOOL_H
#define _LINUX_ETHTOOL_H
-#ifdef __KERNEL__
#include <linux/compat.h>
-#endif
-#include <linux/types.h>
-#include <linux/if_ether.h>
+#include <uapi/linux/ethtool.h>
-/* This should work for both 32 and 64 bit userland. */
-struct ethtool_cmd {
- __u32 cmd;
- __u32 supported; /* Features this interface supports */
- __u32 advertising; /* Features this interface advertises */
- __u16 speed; /* The forced speed (lower bits) in
- * Mbps. Please use
- * ethtool_cmd_speed()/_set() to
- * access it */
- __u8 duplex; /* Duplex, half or full */
- __u8 port; /* Which connector port */
- __u8 phy_address; /* MDIO PHY address (PRTAD for clause 45).
- * May be read-only or read-write
- * depending on the driver.
- */
- __u8 transceiver; /* Which transceiver to use */
- __u8 autoneg; /* Enable or disable autonegotiation */
- __u8 mdio_support; /* MDIO protocols supported. Read-only.
- * Not set by all drivers.
- */
- __u32 maxtxpkt; /* Tx pkts before generating tx int */
- __u32 maxrxpkt; /* Rx pkts before generating rx int */
- __u16 speed_hi; /* The forced speed (upper
- * bits) in Mbps. Please use
- * ethtool_cmd_speed()/_set() to
- * access it */
- __u8 eth_tp_mdix; /* twisted pair MDI-X status */
- __u8 eth_tp_mdix_ctrl; /* twisted pair MDI-X control, when set,
- * link should be renegotiated if necessary
- */
- __u32 lp_advertising; /* Features the link partner advertises */
- __u32 reserved[2];
-};
-
-static inline void ethtool_cmd_speed_set(struct ethtool_cmd *ep,
- __u32 speed)
-{
-
- ep->speed = (__u16)speed;
- ep->speed_hi = (__u16)(speed >> 16);
-}
-
-static inline __u32 ethtool_cmd_speed(const struct ethtool_cmd *ep)
-{
- return (ep->speed_hi << 16) | ep->speed;
-}
-
-/* Device supports clause 22 register access to PHY or peripherals
- * using the interface defined in <linux/mii.h>. This should not be
- * set if there are known to be no such peripherals present or if
- * the driver only emulates clause 22 registers for compatibility.
- */
-#define ETH_MDIO_SUPPORTS_C22 1
-
-/* Device supports clause 45 register access to PHY or peripherals
- * using the interface defined in <linux/mii.h> and <linux/mdio.h>.
- * This should not be set if there are known to be no such peripherals
- * present.
- */
-#define ETH_MDIO_SUPPORTS_C45 2
-
-#define ETHTOOL_FWVERS_LEN 32
-#define ETHTOOL_BUSINFO_LEN 32
-/* these strings are set to whatever the driver author decides... */
-struct ethtool_drvinfo {
- __u32 cmd;
- char driver[32]; /* driver short name, "tulip", "eepro100" */
- char version[32]; /* driver version string */
- char fw_version[ETHTOOL_FWVERS_LEN]; /* firmware version string */
- char bus_info[ETHTOOL_BUSINFO_LEN]; /* Bus info for this IF. */
- /* For PCI devices, use pci_name(pci_dev). */
- char reserved1[32];
- char reserved2[12];
- /*
- * Some struct members below are filled in
- * using ops->get_sset_count(). Obtaining
- * this info from ethtool_drvinfo is now
- * deprecated; Use ETHTOOL_GSSET_INFO
- * instead.
- */
- __u32 n_priv_flags; /* number of flags valid in ETHTOOL_GPFLAGS */
- __u32 n_stats; /* number of u64's from ETHTOOL_GSTATS */
- __u32 testinfo_len;
- __u32 eedump_len; /* Size of data from ETHTOOL_GEEPROM (bytes) */
- __u32 regdump_len; /* Size of data from ETHTOOL_GREGS (bytes) */
-};
-
-#define SOPASS_MAX 6
-/* wake-on-lan settings */
-struct ethtool_wolinfo {
- __u32 cmd;
- __u32 supported;
- __u32 wolopts;
- __u8 sopass[SOPASS_MAX]; /* SecureOn(tm) password */
-};
-
-/* for passing single values */
-struct ethtool_value {
- __u32 cmd;
- __u32 data;
-};
-
-/* for passing big chunks of data */
-struct ethtool_regs {
- __u32 cmd;
- __u32 version; /* driver-specific, indicates different chips/revs */
- __u32 len; /* bytes */
- __u8 data[0];
-};
-
-/* for passing EEPROM chunks */
-struct ethtool_eeprom {
- __u32 cmd;
- __u32 magic;
- __u32 offset; /* in bytes */
- __u32 len; /* in bytes */
- __u8 data[0];
-};
-
-/**
- * struct ethtool_eee - Energy Efficient Ethernet information
- * @cmd: ETHTOOL_{G,S}EEE
- * @supported: Mask of %SUPPORTED_* flags for the speed/duplex combinations
- * for which there is EEE support.
- * @advertised: Mask of %ADVERTISED_* flags for the speed/duplex combinations
- * advertised as eee capable.
- * @lp_advertised: Mask of %ADVERTISED_* flags for the speed/duplex
- * combinations advertised by the link partner as eee capable.
- * @eee_active: Result of the eee auto negotiation.
- * @eee_enabled: EEE configured mode (enabled/disabled).
- * @tx_lpi_enabled: Whether the interface should assert its tx lpi, given
- * that eee was negotiated.
- * @tx_lpi_timer: Time in microseconds the interface delays prior to asserting
- * its tx lpi (after reaching 'idle' state). Effective only when eee
- * was negotiated and tx_lpi_enabled was set.
- */
-struct ethtool_eee {
- __u32 cmd;
- __u32 supported;
- __u32 advertised;
- __u32 lp_advertised;
- __u32 eee_active;
- __u32 eee_enabled;
- __u32 tx_lpi_enabled;
- __u32 tx_lpi_timer;
- __u32 reserved[2];
-};
-
-/**
- * struct ethtool_modinfo - plugin module eeprom information
- * @cmd: %ETHTOOL_GMODULEINFO
- * @type: Standard the module information conforms to %ETH_MODULE_SFF_xxxx
- * @eeprom_len: Length of the eeprom
- *
- * This structure is used to return the information to
- * properly size memory for a subsequent call to %ETHTOOL_GMODULEEEPROM.
- * The type code indicates the eeprom data format
- */
-struct ethtool_modinfo {
- __u32 cmd;
- __u32 type;
- __u32 eeprom_len;
- __u32 reserved[8];
-};
-
-/**
- * struct ethtool_coalesce - coalescing parameters for IRQs and stats updates
- * @cmd: ETHTOOL_{G,S}COALESCE
- * @rx_coalesce_usecs: How many usecs to delay an RX interrupt after
- * a packet arrives.
- * @rx_max_coalesced_frames: Maximum number of packets to receive
- * before an RX interrupt.
- * @rx_coalesce_usecs_irq: Same as @rx_coalesce_usecs, except that
- * this value applies while an IRQ is being serviced by the host.
- * @rx_max_coalesced_frames_irq: Same as @rx_max_coalesced_frames,
- * except that this value applies while an IRQ is being serviced
- * by the host.
- * @tx_coalesce_usecs: How many usecs to delay a TX interrupt after
- * a packet is sent.
- * @tx_max_coalesced_frames: Maximum number of packets to be sent
- * before a TX interrupt.
- * @tx_coalesce_usecs_irq: Same as @tx_coalesce_usecs, except that
- * this value applies while an IRQ is being serviced by the host.
- * @tx_max_coalesced_frames_irq: Same as @tx_max_coalesced_frames,
- * except that this value applies while an IRQ is being serviced
- * by the host.
- * @stats_block_coalesce_usecs: How many usecs to delay in-memory
- * statistics block updates. Some drivers do not have an
- * in-memory statistic block, and in such cases this value is
- * ignored. This value must not be zero.
- * @use_adaptive_rx_coalesce: Enable adaptive RX coalescing.
- * @use_adaptive_tx_coalesce: Enable adaptive TX coalescing.
- * @pkt_rate_low: Threshold for low packet rate (packets per second).
- * @rx_coalesce_usecs_low: How many usecs to delay an RX interrupt after
- * a packet arrives, when the packet rate is below @pkt_rate_low.
- * @rx_max_coalesced_frames_low: Maximum number of packets to be received
- * before an RX interrupt, when the packet rate is below @pkt_rate_low.
- * @tx_coalesce_usecs_low: How many usecs to delay a TX interrupt after
- * a packet is sent, when the packet rate is below @pkt_rate_low.
- * @tx_max_coalesced_frames_low: Maximum nuumber of packets to be sent before
- * a TX interrupt, when the packet rate is below @pkt_rate_low.
- * @pkt_rate_high: Threshold for high packet rate (packets per second).
- * @rx_coalesce_usecs_high: How many usecs to delay an RX interrupt after
- * a packet arrives, when the packet rate is above @pkt_rate_high.
- * @rx_max_coalesced_frames_high: Maximum number of packets to be received
- * before an RX interrupt, when the packet rate is above @pkt_rate_high.
- * @tx_coalesce_usecs_high: How many usecs to delay a TX interrupt after
- * a packet is sent, when the packet rate is above @pkt_rate_high.
- * @tx_max_coalesced_frames_high: Maximum number of packets to be sent before
- * a TX interrupt, when the packet rate is above @pkt_rate_high.
- * @rate_sample_interval: How often to do adaptive coalescing packet rate
- * sampling, measured in seconds. Must not be zero.
- *
- * Each pair of (usecs, max_frames) fields specifies this exit
- * condition for interrupt coalescing:
- * (usecs > 0 && time_since_first_completion >= usecs) ||
- * (max_frames > 0 && completed_frames >= max_frames)
- * It is illegal to set both usecs and max_frames to zero as this
- * would cause interrupts to never be generated. To disable
- * coalescing, set usecs = 0 and max_frames = 1.
- *
- * Some implementations ignore the value of max_frames and use the
- * condition:
- * time_since_first_completion >= usecs
- * This is deprecated. Drivers for hardware that does not support
- * counting completions should validate that max_frames == !rx_usecs.
- *
- * Adaptive RX/TX coalescing is an algorithm implemented by some
- * drivers to improve latency under low packet rates and improve
- * throughput under high packet rates. Some drivers only implement
- * one of RX or TX adaptive coalescing. Anything not implemented by
- * the driver causes these values to be silently ignored.
- *
- * When the packet rate is below @pkt_rate_high but above
- * @pkt_rate_low (both measured in packets per second) the
- * normal {rx,tx}_* coalescing parameters are used.
- */
-struct ethtool_coalesce {
- __u32 cmd;
- __u32 rx_coalesce_usecs;
- __u32 rx_max_coalesced_frames;
- __u32 rx_coalesce_usecs_irq;
- __u32 rx_max_coalesced_frames_irq;
- __u32 tx_coalesce_usecs;
- __u32 tx_max_coalesced_frames;
- __u32 tx_coalesce_usecs_irq;
- __u32 tx_max_coalesced_frames_irq;
- __u32 stats_block_coalesce_usecs;
- __u32 use_adaptive_rx_coalesce;
- __u32 use_adaptive_tx_coalesce;
- __u32 pkt_rate_low;
- __u32 rx_coalesce_usecs_low;
- __u32 rx_max_coalesced_frames_low;
- __u32 tx_coalesce_usecs_low;
- __u32 tx_max_coalesced_frames_low;
- __u32 pkt_rate_high;
- __u32 rx_coalesce_usecs_high;
- __u32 rx_max_coalesced_frames_high;
- __u32 tx_coalesce_usecs_high;
- __u32 tx_max_coalesced_frames_high;
- __u32 rate_sample_interval;
-};
-
-/* for configuring RX/TX ring parameters */
-struct ethtool_ringparam {
- __u32 cmd; /* ETHTOOL_{G,S}RINGPARAM */
-
- /* Read only attributes. These indicate the maximum number
- * of pending RX/TX ring entries the driver will allow the
- * user to set.
- */
- __u32 rx_max_pending;
- __u32 rx_mini_max_pending;
- __u32 rx_jumbo_max_pending;
- __u32 tx_max_pending;
-
- /* Values changeable by the user. The valid values are
- * in the range 1 to the "*_max_pending" counterpart above.
- */
- __u32 rx_pending;
- __u32 rx_mini_pending;
- __u32 rx_jumbo_pending;
- __u32 tx_pending;
-};
-
-/**
- * struct ethtool_channels - configuring number of network channel
- * @cmd: ETHTOOL_{G,S}CHANNELS
- * @max_rx: Read only. Maximum number of receive channel the driver support.
- * @max_tx: Read only. Maximum number of transmit channel the driver support.
- * @max_other: Read only. Maximum number of other channel the driver support.
- * @max_combined: Read only. Maximum number of combined channel the driver
- * support. Set of queues RX, TX or other.
- * @rx_count: Valid values are in the range 1 to the max_rx.
- * @tx_count: Valid values are in the range 1 to the max_tx.
- * @other_count: Valid values are in the range 1 to the max_other.
- * @combined_count: Valid values are in the range 1 to the max_combined.
- *
- * This can be used to configure RX, TX and other channels.
- */
-
-struct ethtool_channels {
- __u32 cmd;
- __u32 max_rx;
- __u32 max_tx;
- __u32 max_other;
- __u32 max_combined;
- __u32 rx_count;
- __u32 tx_count;
- __u32 other_count;
- __u32 combined_count;
-};
-
-/* for configuring link flow control parameters */
-struct ethtool_pauseparam {
- __u32 cmd; /* ETHTOOL_{G,S}PAUSEPARAM */
-
- /* If the link is being auto-negotiated (via ethtool_cmd.autoneg
- * being true) the user may set 'autoneg' here non-zero to have the
- * pause parameters be auto-negotiated too. In such a case, the
- * {rx,tx}_pause values below determine what capabilities are
- * advertised.
- *
- * If 'autoneg' is zero or the link is not being auto-negotiated,
- * then {rx,tx}_pause force the driver to use/not-use pause
- * flow control.
- */
- __u32 autoneg;
- __u32 rx_pause;
- __u32 tx_pause;
-};
-
-#define ETH_GSTRING_LEN 32
-enum ethtool_stringset {
- ETH_SS_TEST = 0,
- ETH_SS_STATS,
- ETH_SS_PRIV_FLAGS,
- ETH_SS_NTUPLE_FILTERS, /* Do not use, GRXNTUPLE is now deprecated */
- ETH_SS_FEATURES,
-};
-
-/* for passing string sets for data tagging */
-struct ethtool_gstrings {
- __u32 cmd; /* ETHTOOL_GSTRINGS */
- __u32 string_set; /* string set id e.c. ETH_SS_TEST, etc*/
- __u32 len; /* number of strings in the string set */
- __u8 data[0];
-};
-
-struct ethtool_sset_info {
- __u32 cmd; /* ETHTOOL_GSSET_INFO */
- __u32 reserved;
- __u64 sset_mask; /* input: each bit selects an sset to query */
- /* output: each bit a returned sset */
- __u32 data[0]; /* ETH_SS_xxx count, in order, based on bits
- in sset_mask. One bit implies one
- __u32, two bits implies two
- __u32's, etc. */
-};
-
-/**
- * enum ethtool_test_flags - flags definition of ethtool_test
- * @ETH_TEST_FL_OFFLINE: if set perform online and offline tests, otherwise
- * only online tests.
- * @ETH_TEST_FL_FAILED: Driver set this flag if test fails.
- * @ETH_TEST_FL_EXTERNAL_LB: Application request to perform external loopback
- * test.
- * @ETH_TEST_FL_EXTERNAL_LB_DONE: Driver performed the external loopback test
- */
-
-enum ethtool_test_flags {
- ETH_TEST_FL_OFFLINE = (1 << 0),
- ETH_TEST_FL_FAILED = (1 << 1),
- ETH_TEST_FL_EXTERNAL_LB = (1 << 2),
- ETH_TEST_FL_EXTERNAL_LB_DONE = (1 << 3),
-};
-
-/* for requesting NIC test and getting results*/
-struct ethtool_test {
- __u32 cmd; /* ETHTOOL_TEST */
- __u32 flags; /* ETH_TEST_FL_xxx */
- __u32 reserved;
- __u32 len; /* result length, in number of u64 elements */
- __u64 data[0];
-};
-
-/* for dumping NIC-specific statistics */
-struct ethtool_stats {
- __u32 cmd; /* ETHTOOL_GSTATS */
- __u32 n_stats; /* number of u64's being returned */
- __u64 data[0];
-};
-
-struct ethtool_perm_addr {
- __u32 cmd; /* ETHTOOL_GPERMADDR */
- __u32 size;
- __u8 data[0];
-};
-
-/* boolean flags controlling per-interface behavior characteristics.
- * When reading, the flag indicates whether or not a certain behavior
- * is enabled/present. When writing, the flag indicates whether
- * or not the driver should turn on (set) or off (clear) a behavior.
- *
- * Some behaviors may read-only (unconditionally absent or present).
- * If such is the case, return EINVAL in the set-flags operation if the
- * flag differs from the read-only value.
- */
-enum ethtool_flags {
- ETH_FLAG_TXVLAN = (1 << 7), /* TX VLAN offload enabled */
- ETH_FLAG_RXVLAN = (1 << 8), /* RX VLAN offload enabled */
- ETH_FLAG_LRO = (1 << 15), /* LRO is enabled */
- ETH_FLAG_NTUPLE = (1 << 27), /* N-tuple filters enabled */
- ETH_FLAG_RXHASH = (1 << 28),
-};
-
-/* The following structures are for supporting RX network flow
- * classification and RX n-tuple configuration. Note, all multibyte
- * fields, e.g., ip4src, ip4dst, psrc, pdst, spi, etc. are expected to
- * be in network byte order.
- */
-
-/**
- * struct ethtool_tcpip4_spec - flow specification for TCP/IPv4 etc.
- * @ip4src: Source host
- * @ip4dst: Destination host
- * @psrc: Source port
- * @pdst: Destination port
- * @tos: Type-of-service
- *
- * This can be used to specify a TCP/IPv4, UDP/IPv4 or SCTP/IPv4 flow.
- */
-struct ethtool_tcpip4_spec {
- __be32 ip4src;
- __be32 ip4dst;
- __be16 psrc;
- __be16 pdst;
- __u8 tos;
-};
-
-/**
- * struct ethtool_ah_espip4_spec - flow specification for IPsec/IPv4
- * @ip4src: Source host
- * @ip4dst: Destination host
- * @spi: Security parameters index
- * @tos: Type-of-service
- *
- * This can be used to specify an IPsec transport or tunnel over IPv4.
- */
-struct ethtool_ah_espip4_spec {
- __be32 ip4src;
- __be32 ip4dst;
- __be32 spi;
- __u8 tos;
-};
-
-#define ETH_RX_NFC_IP4 1
-
-/**
- * struct ethtool_usrip4_spec - general flow specification for IPv4
- * @ip4src: Source host
- * @ip4dst: Destination host
- * @l4_4_bytes: First 4 bytes of transport (layer 4) header
- * @tos: Type-of-service
- * @ip_ver: Value must be %ETH_RX_NFC_IP4; mask must be 0
- * @proto: Transport protocol number; mask must be 0
- */
-struct ethtool_usrip4_spec {
- __be32 ip4src;
- __be32 ip4dst;
- __be32 l4_4_bytes;
- __u8 tos;
- __u8 ip_ver;
- __u8 proto;
-};
-
-union ethtool_flow_union {
- struct ethtool_tcpip4_spec tcp_ip4_spec;
- struct ethtool_tcpip4_spec udp_ip4_spec;
- struct ethtool_tcpip4_spec sctp_ip4_spec;
- struct ethtool_ah_espip4_spec ah_ip4_spec;
- struct ethtool_ah_espip4_spec esp_ip4_spec;
- struct ethtool_usrip4_spec usr_ip4_spec;
- struct ethhdr ether_spec;
- __u8 hdata[60];
-};
-
-struct ethtool_flow_ext {
- __be16 vlan_etype;
- __be16 vlan_tci;
- __be32 data[2];
-};
-
-/**
- * struct ethtool_rx_flow_spec - classification rule for RX flows
- * @flow_type: Type of match to perform, e.g. %TCP_V4_FLOW
- * @h_u: Flow fields to match (dependent on @flow_type)
- * @h_ext: Additional fields to match
- * @m_u: Masks for flow field bits to be matched
- * @m_ext: Masks for additional field bits to be matched
- * Note, all additional fields must be ignored unless @flow_type
- * includes the %FLOW_EXT flag.
- * @ring_cookie: RX ring/queue index to deliver to, or %RX_CLS_FLOW_DISC
- * if packets should be discarded
- * @location: Location of rule in the table. Locations must be
- * numbered such that a flow matching multiple rules will be
- * classified according to the first (lowest numbered) rule.
- */
-struct ethtool_rx_flow_spec {
- __u32 flow_type;
- union ethtool_flow_union h_u;
- struct ethtool_flow_ext h_ext;
- union ethtool_flow_union m_u;
- struct ethtool_flow_ext m_ext;
- __u64 ring_cookie;
- __u32 location;
-};
-
-/**
- * struct ethtool_rxnfc - command to get or set RX flow classification rules
- * @cmd: Specific command number - %ETHTOOL_GRXFH, %ETHTOOL_SRXFH,
- * %ETHTOOL_GRXRINGS, %ETHTOOL_GRXCLSRLCNT, %ETHTOOL_GRXCLSRULE,
- * %ETHTOOL_GRXCLSRLALL, %ETHTOOL_SRXCLSRLDEL or %ETHTOOL_SRXCLSRLINS
- * @flow_type: Type of flow to be affected, e.g. %TCP_V4_FLOW
- * @data: Command-dependent value
- * @fs: Flow classification rule
- * @rule_cnt: Number of rules to be affected
- * @rule_locs: Array of used rule locations
- *
- * For %ETHTOOL_GRXFH and %ETHTOOL_SRXFH, @data is a bitmask indicating
- * the fields included in the flow hash, e.g. %RXH_IP_SRC. The following
- * structure fields must not be used.
- *
- * For %ETHTOOL_GRXRINGS, @data is set to the number of RX rings/queues
- * on return.
- *
- * For %ETHTOOL_GRXCLSRLCNT, @rule_cnt is set to the number of defined
- * rules on return. If @data is non-zero on return then it is the
- * size of the rule table, plus the flag %RX_CLS_LOC_SPECIAL if the
- * driver supports any special location values. If that flag is not
- * set in @data then special location values should not be used.
- *
- * For %ETHTOOL_GRXCLSRULE, @fs.@location specifies the location of an
- * existing rule on entry and @fs contains the rule on return.
- *
- * For %ETHTOOL_GRXCLSRLALL, @rule_cnt specifies the array size of the
- * user buffer for @rule_locs on entry. On return, @data is the size
- * of the rule table, @rule_cnt is the number of defined rules, and
- * @rule_locs contains the locations of the defined rules. Drivers
- * must use the second parameter to get_rxnfc() instead of @rule_locs.
- *
- * For %ETHTOOL_SRXCLSRLINS, @fs specifies the rule to add or update.
- * @fs.@location either specifies the location to use or is a special
- * location value with %RX_CLS_LOC_SPECIAL flag set. On return,
- * @fs.@location is the actual rule location.
- *
- * For %ETHTOOL_SRXCLSRLDEL, @fs.@location specifies the location of an
- * existing rule on entry.
- *
- * A driver supporting the special location values for
- * %ETHTOOL_SRXCLSRLINS may add the rule at any suitable unused
- * location, and may remove a rule at a later location (lower
- * priority) that matches exactly the same set of flows. The special
- * values are: %RX_CLS_LOC_ANY, selecting any location;
- * %RX_CLS_LOC_FIRST, selecting the first suitable location (maximum
- * priority); and %RX_CLS_LOC_LAST, selecting the last suitable
- * location (minimum priority). Additional special values may be
- * defined in future and drivers must return -%EINVAL for any
- * unrecognised value.
- */
-struct ethtool_rxnfc {
- __u32 cmd;
- __u32 flow_type;
- __u64 data;
- struct ethtool_rx_flow_spec fs;
- __u32 rule_cnt;
- __u32 rule_locs[0];
-};
-
-#ifdef __KERNEL__
#ifdef CONFIG_COMPAT
struct compat_ethtool_rx_flow_spec {
@@ -621,223 +37,6 @@
};
#endif /* CONFIG_COMPAT */
-#endif /* __KERNEL__ */
-
-/**
- * struct ethtool_rxfh_indir - command to get or set RX flow hash indirection
- * @cmd: Specific command number - %ETHTOOL_GRXFHINDIR or %ETHTOOL_SRXFHINDIR
- * @size: On entry, the array size of the user buffer, which may be zero.
- * On return from %ETHTOOL_GRXFHINDIR, the array size of the hardware
- * indirection table.
- * @ring_index: RX ring/queue index for each hash value
- *
- * For %ETHTOOL_GRXFHINDIR, a @size of zero means that only the size
- * should be returned. For %ETHTOOL_SRXFHINDIR, a @size of zero means
- * the table should be reset to default values. This last feature
- * is not supported by the original implementations.
- */
-struct ethtool_rxfh_indir {
- __u32 cmd;
- __u32 size;
- __u32 ring_index[0];
-};
-
-/**
- * struct ethtool_rx_ntuple_flow_spec - specification for RX flow filter
- * @flow_type: Type of match to perform, e.g. %TCP_V4_FLOW
- * @h_u: Flow field values to match (dependent on @flow_type)
- * @m_u: Masks for flow field value bits to be ignored
- * @vlan_tag: VLAN tag to match
- * @vlan_tag_mask: Mask for VLAN tag bits to be ignored
- * @data: Driver-dependent data to match
- * @data_mask: Mask for driver-dependent data bits to be ignored
- * @action: RX ring/queue index to deliver to (non-negative) or other action
- * (negative, e.g. %ETHTOOL_RXNTUPLE_ACTION_DROP)
- *
- * For flow types %TCP_V4_FLOW, %UDP_V4_FLOW and %SCTP_V4_FLOW, where
- * a field value and mask are both zero this is treated as if all mask
- * bits are set i.e. the field is ignored.
- */
-struct ethtool_rx_ntuple_flow_spec {
- __u32 flow_type;
- union {
- struct ethtool_tcpip4_spec tcp_ip4_spec;
- struct ethtool_tcpip4_spec udp_ip4_spec;
- struct ethtool_tcpip4_spec sctp_ip4_spec;
- struct ethtool_ah_espip4_spec ah_ip4_spec;
- struct ethtool_ah_espip4_spec esp_ip4_spec;
- struct ethtool_usrip4_spec usr_ip4_spec;
- struct ethhdr ether_spec;
- __u8 hdata[72];
- } h_u, m_u;
-
- __u16 vlan_tag;
- __u16 vlan_tag_mask;
- __u64 data;
- __u64 data_mask;
-
- __s32 action;
-#define ETHTOOL_RXNTUPLE_ACTION_DROP (-1) /* drop packet */
-#define ETHTOOL_RXNTUPLE_ACTION_CLEAR (-2) /* clear filter */
-};
-
-/**
- * struct ethtool_rx_ntuple - command to set or clear RX flow filter
- * @cmd: Command number - %ETHTOOL_SRXNTUPLE
- * @fs: Flow filter specification
- */
-struct ethtool_rx_ntuple {
- __u32 cmd;
- struct ethtool_rx_ntuple_flow_spec fs;
-};
-
-#define ETHTOOL_FLASH_MAX_FILENAME 128
-enum ethtool_flash_op_type {
- ETHTOOL_FLASH_ALL_REGIONS = 0,
-};
-
-/* for passing firmware flashing related parameters */
-struct ethtool_flash {
- __u32 cmd;
- __u32 region;
- char data[ETHTOOL_FLASH_MAX_FILENAME];
-};
-
-/**
- * struct ethtool_dump - used for retrieving, setting device dump
- * @cmd: Command number - %ETHTOOL_GET_DUMP_FLAG, %ETHTOOL_GET_DUMP_DATA, or
- * %ETHTOOL_SET_DUMP
- * @version: FW version of the dump, filled in by driver
- * @flag: driver dependent flag for dump setting, filled in by driver during
- * get and filled in by ethtool for set operation.
- * flag must be initialized by macro ETH_FW_DUMP_DISABLE value when
- * firmware dump is disabled.
- * @len: length of dump data, used as the length of the user buffer on entry to
- * %ETHTOOL_GET_DUMP_DATA and this is returned as dump length by driver
- * for %ETHTOOL_GET_DUMP_FLAG command
- * @data: data collected for get dump data operation
- */
-
-#define ETH_FW_DUMP_DISABLE 0
-
-struct ethtool_dump {
- __u32 cmd;
- __u32 version;
- __u32 flag;
- __u32 len;
- __u8 data[0];
-};
-
-/* for returning and changing feature sets */
-
-/**
- * struct ethtool_get_features_block - block with state of 32 features
- * @available: mask of changeable features
- * @requested: mask of features requested to be enabled if possible
- * @active: mask of currently enabled features
- * @never_changed: mask of features not changeable for any device
- */
-struct ethtool_get_features_block {
- __u32 available;
- __u32 requested;
- __u32 active;
- __u32 never_changed;
-};
-
-/**
- * struct ethtool_gfeatures - command to get state of device's features
- * @cmd: command number = %ETHTOOL_GFEATURES
- * @size: in: number of elements in the features[] array;
- * out: number of elements in features[] needed to hold all features
- * @features: state of features
- */
-struct ethtool_gfeatures {
- __u32 cmd;
- __u32 size;
- struct ethtool_get_features_block features[0];
-};
-
-/**
- * struct ethtool_set_features_block - block with request for 32 features
- * @valid: mask of features to be changed
- * @requested: values of features to be changed
- */
-struct ethtool_set_features_block {
- __u32 valid;
- __u32 requested;
-};
-
-/**
- * struct ethtool_sfeatures - command to request change in device's features
- * @cmd: command number = %ETHTOOL_SFEATURES
- * @size: array size of the features[] array
- * @features: feature change masks
- */
-struct ethtool_sfeatures {
- __u32 cmd;
- __u32 size;
- struct ethtool_set_features_block features[0];
-};
-
-/**
- * struct ethtool_ts_info - holds a device's timestamping and PHC association
- * @cmd: command number = %ETHTOOL_GET_TS_INFO
- * @so_timestamping: bit mask of the sum of the supported SO_TIMESTAMPING flags
- * @phc_index: device index of the associated PHC, or -1 if there is none
- * @tx_types: bit mask of the supported hwtstamp_tx_types enumeration values
- * @rx_filters: bit mask of the supported hwtstamp_rx_filters enumeration values
- *
- * The bits in the 'tx_types' and 'rx_filters' fields correspond to
- * the 'hwtstamp_tx_types' and 'hwtstamp_rx_filters' enumeration values,
- * respectively. For example, if the device supports HWTSTAMP_TX_ON,
- * then (1 << HWTSTAMP_TX_ON) in 'tx_types' will be set.
- */
-struct ethtool_ts_info {
- __u32 cmd;
- __u32 so_timestamping;
- __s32 phc_index;
- __u32 tx_types;
- __u32 tx_reserved[3];
- __u32 rx_filters;
- __u32 rx_reserved[3];
-};
-
-/*
- * %ETHTOOL_SFEATURES changes features present in features[].valid to the
- * values of corresponding bits in features[].requested. Bits in .requested
- * not set in .valid or not changeable are ignored.
- *
- * Returns %EINVAL when .valid contains undefined or never-changeable bits
- * or size is not equal to required number of features words (32-bit blocks).
- * Returns >= 0 if request was completed; bits set in the value mean:
- * %ETHTOOL_F_UNSUPPORTED - there were bits set in .valid that are not
- * changeable (not present in %ETHTOOL_GFEATURES' features[].available)
- * those bits were ignored.
- * %ETHTOOL_F_WISH - some or all changes requested were recorded but the
- * resulting state of bits masked by .valid is not equal to .requested.
- * Probably there are other device-specific constraints on some features
- * in the set. When %ETHTOOL_F_UNSUPPORTED is set, .valid is considered
- * here as though ignored bits were cleared.
- * %ETHTOOL_F_COMPAT - some or all changes requested were made by calling
- * compatibility functions. Requested offload state cannot be properly
- * managed by kernel.
- *
- * Meaning of bits in the masks are obtained by %ETHTOOL_GSSET_INFO (number of
- * bits in the arrays - always multiple of 32) and %ETHTOOL_GSTRINGS commands
- * for ETH_SS_FEATURES string set. First entry in the table corresponds to least
- * significant bit in features[0] fields. Empty strings mark undefined features.
- */
-enum ethtool_sfeatures_retval_bits {
- ETHTOOL_F_UNSUPPORTED__BIT,
- ETHTOOL_F_WISH__BIT,
- ETHTOOL_F_COMPAT__BIT,
-};
-
-#define ETHTOOL_F_UNSUPPORTED (1 << ETHTOOL_F_UNSUPPORTED__BIT)
-#define ETHTOOL_F_WISH (1 << ETHTOOL_F_WISH__BIT)
-#define ETHTOOL_F_COMPAT (1 << ETHTOOL_F_COMPAT__BIT)
-
-#ifdef __KERNEL__
#include <linux/rculist.h>
@@ -1049,277 +248,4 @@
};
-#endif /* __KERNEL__ */
-
-/* CMDs currently supported */
-#define ETHTOOL_GSET 0x00000001 /* Get settings. */
-#define ETHTOOL_SSET 0x00000002 /* Set settings. */
-#define ETHTOOL_GDRVINFO 0x00000003 /* Get driver info. */
-#define ETHTOOL_GREGS 0x00000004 /* Get NIC registers. */
-#define ETHTOOL_GWOL 0x00000005 /* Get wake-on-lan options. */
-#define ETHTOOL_SWOL 0x00000006 /* Set wake-on-lan options. */
-#define ETHTOOL_GMSGLVL 0x00000007 /* Get driver message level */
-#define ETHTOOL_SMSGLVL 0x00000008 /* Set driver msg level. */
-#define ETHTOOL_NWAY_RST 0x00000009 /* Restart autonegotiation. */
-/* Get link status for host, i.e. whether the interface *and* the
- * physical port (if there is one) are up (ethtool_value). */
-#define ETHTOOL_GLINK 0x0000000a
-#define ETHTOOL_GEEPROM 0x0000000b /* Get EEPROM data */
-#define ETHTOOL_SEEPROM 0x0000000c /* Set EEPROM data. */
-#define ETHTOOL_GCOALESCE 0x0000000e /* Get coalesce config */
-#define ETHTOOL_SCOALESCE 0x0000000f /* Set coalesce config. */
-#define ETHTOOL_GRINGPARAM 0x00000010 /* Get ring parameters */
-#define ETHTOOL_SRINGPARAM 0x00000011 /* Set ring parameters. */
-#define ETHTOOL_GPAUSEPARAM 0x00000012 /* Get pause parameters */
-#define ETHTOOL_SPAUSEPARAM 0x00000013 /* Set pause parameters. */
-#define ETHTOOL_GRXCSUM 0x00000014 /* Get RX hw csum enable (ethtool_value) */
-#define ETHTOOL_SRXCSUM 0x00000015 /* Set RX hw csum enable (ethtool_value) */
-#define ETHTOOL_GTXCSUM 0x00000016 /* Get TX hw csum enable (ethtool_value) */
-#define ETHTOOL_STXCSUM 0x00000017 /* Set TX hw csum enable (ethtool_value) */
-#define ETHTOOL_GSG 0x00000018 /* Get scatter-gather enable
- * (ethtool_value) */
-#define ETHTOOL_SSG 0x00000019 /* Set scatter-gather enable
- * (ethtool_value). */
-#define ETHTOOL_TEST 0x0000001a /* execute NIC self-test. */
-#define ETHTOOL_GSTRINGS 0x0000001b /* get specified string set */
-#define ETHTOOL_PHYS_ID 0x0000001c /* identify the NIC */
-#define ETHTOOL_GSTATS 0x0000001d /* get NIC-specific statistics */
-#define ETHTOOL_GTSO 0x0000001e /* Get TSO enable (ethtool_value) */
-#define ETHTOOL_STSO 0x0000001f /* Set TSO enable (ethtool_value) */
-#define ETHTOOL_GPERMADDR 0x00000020 /* Get permanent hardware address */
-#define ETHTOOL_GUFO 0x00000021 /* Get UFO enable (ethtool_value) */
-#define ETHTOOL_SUFO 0x00000022 /* Set UFO enable (ethtool_value) */
-#define ETHTOOL_GGSO 0x00000023 /* Get GSO enable (ethtool_value) */
-#define ETHTOOL_SGSO 0x00000024 /* Set GSO enable (ethtool_value) */
-#define ETHTOOL_GFLAGS 0x00000025 /* Get flags bitmap(ethtool_value) */
-#define ETHTOOL_SFLAGS 0x00000026 /* Set flags bitmap(ethtool_value) */
-#define ETHTOOL_GPFLAGS 0x00000027 /* Get driver-private flags bitmap */
-#define ETHTOOL_SPFLAGS 0x00000028 /* Set driver-private flags bitmap */
-
-#define ETHTOOL_GRXFH 0x00000029 /* Get RX flow hash configuration */
-#define ETHTOOL_SRXFH 0x0000002a /* Set RX flow hash configuration */
-#define ETHTOOL_GGRO 0x0000002b /* Get GRO enable (ethtool_value) */
-#define ETHTOOL_SGRO 0x0000002c /* Set GRO enable (ethtool_value) */
-#define ETHTOOL_GRXRINGS 0x0000002d /* Get RX rings available for LB */
-#define ETHTOOL_GRXCLSRLCNT 0x0000002e /* Get RX class rule count */
-#define ETHTOOL_GRXCLSRULE 0x0000002f /* Get RX classification rule */
-#define ETHTOOL_GRXCLSRLALL 0x00000030 /* Get all RX classification rule */
-#define ETHTOOL_SRXCLSRLDEL 0x00000031 /* Delete RX classification rule */
-#define ETHTOOL_SRXCLSRLINS 0x00000032 /* Insert RX classification rule */
-#define ETHTOOL_FLASHDEV 0x00000033 /* Flash firmware to device */
-#define ETHTOOL_RESET 0x00000034 /* Reset hardware */
-#define ETHTOOL_SRXNTUPLE 0x00000035 /* Add an n-tuple filter to device */
-#define ETHTOOL_GRXNTUPLE 0x00000036 /* deprecated */
-#define ETHTOOL_GSSET_INFO 0x00000037 /* Get string set info */
-#define ETHTOOL_GRXFHINDIR 0x00000038 /* Get RX flow hash indir'n table */
-#define ETHTOOL_SRXFHINDIR 0x00000039 /* Set RX flow hash indir'n table */
-
-#define ETHTOOL_GFEATURES 0x0000003a /* Get device offload settings */
-#define ETHTOOL_SFEATURES 0x0000003b /* Change device offload settings */
-#define ETHTOOL_GCHANNELS 0x0000003c /* Get no of channels */
-#define ETHTOOL_SCHANNELS 0x0000003d /* Set no of channels */
-#define ETHTOOL_SET_DUMP 0x0000003e /* Set dump settings */
-#define ETHTOOL_GET_DUMP_FLAG 0x0000003f /* Get dump settings */
-#define ETHTOOL_GET_DUMP_DATA 0x00000040 /* Get dump data */
-#define ETHTOOL_GET_TS_INFO 0x00000041 /* Get time stamping and PHC info */
-#define ETHTOOL_GMODULEINFO 0x00000042 /* Get plug-in module information */
-#define ETHTOOL_GMODULEEEPROM 0x00000043 /* Get plug-in module eeprom */
-#define ETHTOOL_GEEE 0x00000044 /* Get EEE settings */
-#define ETHTOOL_SEEE 0x00000045 /* Set EEE settings */
-
-/* compatibility with older code */
-#define SPARC_ETH_GSET ETHTOOL_GSET
-#define SPARC_ETH_SSET ETHTOOL_SSET
-
-/* Indicates what features are supported by the interface. */
-#define SUPPORTED_10baseT_Half (1 << 0)
-#define SUPPORTED_10baseT_Full (1 << 1)
-#define SUPPORTED_100baseT_Half (1 << 2)
-#define SUPPORTED_100baseT_Full (1 << 3)
-#define SUPPORTED_1000baseT_Half (1 << 4)
-#define SUPPORTED_1000baseT_Full (1 << 5)
-#define SUPPORTED_Autoneg (1 << 6)
-#define SUPPORTED_TP (1 << 7)
-#define SUPPORTED_AUI (1 << 8)
-#define SUPPORTED_MII (1 << 9)
-#define SUPPORTED_FIBRE (1 << 10)
-#define SUPPORTED_BNC (1 << 11)
-#define SUPPORTED_10000baseT_Full (1 << 12)
-#define SUPPORTED_Pause (1 << 13)
-#define SUPPORTED_Asym_Pause (1 << 14)
-#define SUPPORTED_2500baseX_Full (1 << 15)
-#define SUPPORTED_Backplane (1 << 16)
-#define SUPPORTED_1000baseKX_Full (1 << 17)
-#define SUPPORTED_10000baseKX4_Full (1 << 18)
-#define SUPPORTED_10000baseKR_Full (1 << 19)
-#define SUPPORTED_10000baseR_FEC (1 << 20)
-#define SUPPORTED_20000baseMLD2_Full (1 << 21)
-#define SUPPORTED_20000baseKR2_Full (1 << 22)
-#define SUPPORTED_40000baseKR4_Full (1 << 23)
-#define SUPPORTED_40000baseCR4_Full (1 << 24)
-#define SUPPORTED_40000baseSR4_Full (1 << 25)
-#define SUPPORTED_40000baseLR4_Full (1 << 26)
-
-/* Indicates what features are advertised by the interface. */
-#define ADVERTISED_10baseT_Half (1 << 0)
-#define ADVERTISED_10baseT_Full (1 << 1)
-#define ADVERTISED_100baseT_Half (1 << 2)
-#define ADVERTISED_100baseT_Full (1 << 3)
-#define ADVERTISED_1000baseT_Half (1 << 4)
-#define ADVERTISED_1000baseT_Full (1 << 5)
-#define ADVERTISED_Autoneg (1 << 6)
-#define ADVERTISED_TP (1 << 7)
-#define ADVERTISED_AUI (1 << 8)
-#define ADVERTISED_MII (1 << 9)
-#define ADVERTISED_FIBRE (1 << 10)
-#define ADVERTISED_BNC (1 << 11)
-#define ADVERTISED_10000baseT_Full (1 << 12)
-#define ADVERTISED_Pause (1 << 13)
-#define ADVERTISED_Asym_Pause (1 << 14)
-#define ADVERTISED_2500baseX_Full (1 << 15)
-#define ADVERTISED_Backplane (1 << 16)
-#define ADVERTISED_1000baseKX_Full (1 << 17)
-#define ADVERTISED_10000baseKX4_Full (1 << 18)
-#define ADVERTISED_10000baseKR_Full (1 << 19)
-#define ADVERTISED_10000baseR_FEC (1 << 20)
-#define ADVERTISED_20000baseMLD2_Full (1 << 21)
-#define ADVERTISED_20000baseKR2_Full (1 << 22)
-#define ADVERTISED_40000baseKR4_Full (1 << 23)
-#define ADVERTISED_40000baseCR4_Full (1 << 24)
-#define ADVERTISED_40000baseSR4_Full (1 << 25)
-#define ADVERTISED_40000baseLR4_Full (1 << 26)
-
-/* The following are all involved in forcing a particular link
- * mode for the device for setting things. When getting the
- * devices settings, these indicate the current mode and whether
- * it was forced up into this mode or autonegotiated.
- */
-
-/* The forced speed, 10Mb, 100Mb, gigabit, 2.5Gb, 10GbE. */
-#define SPEED_10 10
-#define SPEED_100 100
-#define SPEED_1000 1000
-#define SPEED_2500 2500
-#define SPEED_10000 10000
-#define SPEED_UNKNOWN -1
-
-/* Duplex, half or full. */
-#define DUPLEX_HALF 0x00
-#define DUPLEX_FULL 0x01
-#define DUPLEX_UNKNOWN 0xff
-
-/* Which connector port. */
-#define PORT_TP 0x00
-#define PORT_AUI 0x01
-#define PORT_MII 0x02
-#define PORT_FIBRE 0x03
-#define PORT_BNC 0x04
-#define PORT_DA 0x05
-#define PORT_NONE 0xef
-#define PORT_OTHER 0xff
-
-/* Which transceiver to use. */
-#define XCVR_INTERNAL 0x00
-#define XCVR_EXTERNAL 0x01
-#define XCVR_DUMMY1 0x02
-#define XCVR_DUMMY2 0x03
-#define XCVR_DUMMY3 0x04
-
-/* Enable or disable autonegotiation. If this is set to enable,
- * the forced link modes above are completely ignored.
- */
-#define AUTONEG_DISABLE 0x00
-#define AUTONEG_ENABLE 0x01
-
-/* MDI or MDI-X status/control - if MDI/MDI_X/AUTO is set then
- * the driver is required to renegotiate link
- */
-#define ETH_TP_MDI_INVALID 0x00 /* status: unknown; control: unsupported */
-#define ETH_TP_MDI 0x01 /* status: MDI; control: force MDI */
-#define ETH_TP_MDI_X 0x02 /* status: MDI-X; control: force MDI-X */
-#define ETH_TP_MDI_AUTO 0x03 /* control: auto-select */
-
-/* Wake-On-Lan options. */
-#define WAKE_PHY (1 << 0)
-#define WAKE_UCAST (1 << 1)
-#define WAKE_MCAST (1 << 2)
-#define WAKE_BCAST (1 << 3)
-#define WAKE_ARP (1 << 4)
-#define WAKE_MAGIC (1 << 5)
-#define WAKE_MAGICSECURE (1 << 6) /* only meaningful if WAKE_MAGIC */
-
-/* L2-L4 network traffic flow types */
-#define TCP_V4_FLOW 0x01 /* hash or spec (tcp_ip4_spec) */
-#define UDP_V4_FLOW 0x02 /* hash or spec (udp_ip4_spec) */
-#define SCTP_V4_FLOW 0x03 /* hash or spec (sctp_ip4_spec) */
-#define AH_ESP_V4_FLOW 0x04 /* hash only */
-#define TCP_V6_FLOW 0x05 /* hash only */
-#define UDP_V6_FLOW 0x06 /* hash only */
-#define SCTP_V6_FLOW 0x07 /* hash only */
-#define AH_ESP_V6_FLOW 0x08 /* hash only */
-#define AH_V4_FLOW 0x09 /* hash or spec (ah_ip4_spec) */
-#define ESP_V4_FLOW 0x0a /* hash or spec (esp_ip4_spec) */
-#define AH_V6_FLOW 0x0b /* hash only */
-#define ESP_V6_FLOW 0x0c /* hash only */
-#define IP_USER_FLOW 0x0d /* spec only (usr_ip4_spec) */
-#define IPV4_FLOW 0x10 /* hash only */
-#define IPV6_FLOW 0x11 /* hash only */
-#define ETHER_FLOW 0x12 /* spec only (ether_spec) */
-/* Flag to enable additional fields in struct ethtool_rx_flow_spec */
-#define FLOW_EXT 0x80000000
-
-/* L3-L4 network traffic flow hash options */
-#define RXH_L2DA (1 << 1)
-#define RXH_VLAN (1 << 2)
-#define RXH_L3_PROTO (1 << 3)
-#define RXH_IP_SRC (1 << 4)
-#define RXH_IP_DST (1 << 5)
-#define RXH_L4_B_0_1 (1 << 6) /* src port in case of TCP/UDP/SCTP */
-#define RXH_L4_B_2_3 (1 << 7) /* dst port in case of TCP/UDP/SCTP */
-#define RXH_DISCARD (1 << 31)
-
-#define RX_CLS_FLOW_DISC 0xffffffffffffffffULL
-
-/* Special RX classification rule insert location values */
-#define RX_CLS_LOC_SPECIAL 0x80000000 /* flag */
-#define RX_CLS_LOC_ANY 0xffffffff
-#define RX_CLS_LOC_FIRST 0xfffffffe
-#define RX_CLS_LOC_LAST 0xfffffffd
-
-/* EEPROM Standards for plug in modules */
-#define ETH_MODULE_SFF_8079 0x1
-#define ETH_MODULE_SFF_8079_LEN 256
-#define ETH_MODULE_SFF_8472 0x2
-#define ETH_MODULE_SFF_8472_LEN 512
-
-/* Reset flags */
-/* The reset() operation must clear the flags for the components which
- * were actually reset. On successful return, the flags indicate the
- * components which were not reset, either because they do not exist
- * in the hardware or because they cannot be reset independently. The
- * driver must never reset any components that were not requested.
- */
-enum ethtool_reset_flags {
- /* These flags represent components dedicated to the interface
- * the command is addressed to. Shift any flag left by
- * ETH_RESET_SHARED_SHIFT to reset a shared component of the
- * same type.
- */
- ETH_RESET_MGMT = 1 << 0, /* Management processor */
- ETH_RESET_IRQ = 1 << 1, /* Interrupt requester */
- ETH_RESET_DMA = 1 << 2, /* DMA engine */
- ETH_RESET_FILTER = 1 << 3, /* Filtering/flow direction */
- ETH_RESET_OFFLOAD = 1 << 4, /* Protocol offload */
- ETH_RESET_MAC = 1 << 5, /* Media access controller */
- ETH_RESET_PHY = 1 << 6, /* Transceiver/PHY */
- ETH_RESET_RAM = 1 << 7, /* RAM shared between
- * multiple components */
-
- ETH_RESET_DEDICATED = 0x0000ffff, /* All components dedicated to
- * this interface */
- ETH_RESET_ALL = 0xffffffff, /* All components used by this
- * interface, even if shared */
-};
-#define ETH_RESET_SHARED_SHIFT 16
-
#endif /* _LINUX_ETHTOOL_H */
diff --git a/include/linux/eventpoll.h b/include/linux/eventpoll.h
index 41085d0..6daf6d4 100644
--- a/include/linux/eventpoll.h
+++ b/include/linux/eventpoll.h
@@ -10,59 +10,11 @@
* Davide Libenzi <davidel@xmailserver.org>
*
*/
-
#ifndef _LINUX_EVENTPOLL_H
#define _LINUX_EVENTPOLL_H
-/* For O_CLOEXEC */
-#include <linux/fcntl.h>
-#include <linux/types.h>
+#include <uapi/linux/eventpoll.h>
-/* Flags for epoll_create1. */
-#define EPOLL_CLOEXEC O_CLOEXEC
-
-/* Valid opcodes to issue to sys_epoll_ctl() */
-#define EPOLL_CTL_ADD 1
-#define EPOLL_CTL_DEL 2
-#define EPOLL_CTL_MOD 3
-#define EPOLL_CTL_DISABLE 4
-
-/*
- * Request the handling of system wakeup events so as to prevent system suspends
- * from happening while those events are being processed.
- *
- * Assuming neither EPOLLET nor EPOLLONESHOT is set, system suspends will not be
- * re-allowed until epoll_wait is called again after consuming the wakeup
- * event(s).
- *
- * Requires CAP_BLOCK_SUSPEND
- */
-#define EPOLLWAKEUP (1 << 29)
-
-/* Set the One Shot behaviour for the target file descriptor */
-#define EPOLLONESHOT (1 << 30)
-
-/* Set the Edge Triggered behaviour for the target file descriptor */
-#define EPOLLET (1 << 31)
-
-/*
- * On x86-64 make the 64bit structure have the same alignment as the
- * 32bit structure. This makes 32bit emulation easier.
- *
- * UML/x86_64 needs the same packing as x86_64
- */
-#ifdef __x86_64__
-#define EPOLL_PACKED __attribute__((packed))
-#else
-#define EPOLL_PACKED
-#endif
-
-struct epoll_event {
- __u32 events;
- __u64 data;
-} EPOLL_PACKED;
-
-#ifdef __KERNEL__
/* Forward declarations to avoid compiler errors */
struct file;
@@ -116,7 +68,4 @@
#endif
-#endif /* #ifdef __KERNEL__ */
-
#endif /* #ifndef _LINUX_EVENTPOLL_H */
-
diff --git a/include/linux/falloc.h b/include/linux/falloc.h
index d39b824..3159168 100644
--- a/include/linux/falloc.h
+++ b/include/linux/falloc.h
@@ -1,11 +1,8 @@
#ifndef _FALLOC_H_
#define _FALLOC_H_
-#define FALLOC_FL_KEEP_SIZE 0x01 /* default is extend size */
-#define FALLOC_FL_PUNCH_HOLE 0x02 /* de-allocates range */
-#define FALLOC_FL_NO_HIDE_STALE 0x04 /* reserved codepoint */
+#include <uapi/linux/falloc.h>
-#ifdef __KERNEL__
/*
* Space reservation ioctls and argument structure
@@ -24,6 +21,4 @@
#define FS_IOC_RESVSP _IOW('X', 40, struct space_resv)
#define FS_IOC_RESVSP64 _IOW('X', 42, struct space_resv)
-#endif /* __KERNEL__ */
-
#endif /* _FALLOC_H_ */
diff --git a/include/linux/fanotify.h b/include/linux/fanotify.h
index 6c6133f..cef93dd 100644
--- a/include/linux/fanotify.h
+++ b/include/linux/fanotify.h
@@ -1,120 +1,8 @@
#ifndef _LINUX_FANOTIFY_H
#define _LINUX_FANOTIFY_H
-#include <linux/types.h>
+#include <uapi/linux/fanotify.h>
-/* the following events that user-space can register for */
-#define FAN_ACCESS 0x00000001 /* File was accessed */
-#define FAN_MODIFY 0x00000002 /* File was modified */
-#define FAN_CLOSE_WRITE 0x00000008 /* Writtable file closed */
-#define FAN_CLOSE_NOWRITE 0x00000010 /* Unwrittable file closed */
-#define FAN_OPEN 0x00000020 /* File was opened */
-
-#define FAN_Q_OVERFLOW 0x00004000 /* Event queued overflowed */
-
-#define FAN_OPEN_PERM 0x00010000 /* File open in perm check */
-#define FAN_ACCESS_PERM 0x00020000 /* File accessed in perm check */
-
-#define FAN_ONDIR 0x40000000 /* event occurred against dir */
-
-#define FAN_EVENT_ON_CHILD 0x08000000 /* interested in child events */
-
-/* helper events */
-#define FAN_CLOSE (FAN_CLOSE_WRITE | FAN_CLOSE_NOWRITE) /* close */
-
-/* flags used for fanotify_init() */
-#define FAN_CLOEXEC 0x00000001
-#define FAN_NONBLOCK 0x00000002
-
-/* These are NOT bitwise flags. Both bits are used togther. */
-#define FAN_CLASS_NOTIF 0x00000000
-#define FAN_CLASS_CONTENT 0x00000004
-#define FAN_CLASS_PRE_CONTENT 0x00000008
-#define FAN_ALL_CLASS_BITS (FAN_CLASS_NOTIF | FAN_CLASS_CONTENT | \
- FAN_CLASS_PRE_CONTENT)
-
-#define FAN_UNLIMITED_QUEUE 0x00000010
-#define FAN_UNLIMITED_MARKS 0x00000020
-
-#define FAN_ALL_INIT_FLAGS (FAN_CLOEXEC | FAN_NONBLOCK | \
- FAN_ALL_CLASS_BITS | FAN_UNLIMITED_QUEUE |\
- FAN_UNLIMITED_MARKS)
-
-/* flags used for fanotify_modify_mark() */
-#define FAN_MARK_ADD 0x00000001
-#define FAN_MARK_REMOVE 0x00000002
-#define FAN_MARK_DONT_FOLLOW 0x00000004
-#define FAN_MARK_ONLYDIR 0x00000008
-#define FAN_MARK_MOUNT 0x00000010
-#define FAN_MARK_IGNORED_MASK 0x00000020
-#define FAN_MARK_IGNORED_SURV_MODIFY 0x00000040
-#define FAN_MARK_FLUSH 0x00000080
-#ifdef __KERNEL__
/* not valid from userspace, only kernel internal */
#define FAN_MARK_ONDIR 0x00000100
-#endif
-
-#define FAN_ALL_MARK_FLAGS (FAN_MARK_ADD |\
- FAN_MARK_REMOVE |\
- FAN_MARK_DONT_FOLLOW |\
- FAN_MARK_ONLYDIR |\
- FAN_MARK_MOUNT |\
- FAN_MARK_IGNORED_MASK |\
- FAN_MARK_IGNORED_SURV_MODIFY |\
- FAN_MARK_FLUSH)
-
-/*
- * All of the events - we build the list by hand so that we can add flags in
- * the future and not break backward compatibility. Apps will get only the
- * events that they originally wanted. Be sure to add new events here!
- */
-#define FAN_ALL_EVENTS (FAN_ACCESS |\
- FAN_MODIFY |\
- FAN_CLOSE |\
- FAN_OPEN)
-
-/*
- * All events which require a permission response from userspace
- */
-#define FAN_ALL_PERM_EVENTS (FAN_OPEN_PERM |\
- FAN_ACCESS_PERM)
-
-#define FAN_ALL_OUTGOING_EVENTS (FAN_ALL_EVENTS |\
- FAN_ALL_PERM_EVENTS |\
- FAN_Q_OVERFLOW)
-
-#define FANOTIFY_METADATA_VERSION 3
-
-struct fanotify_event_metadata {
- __u32 event_len;
- __u8 vers;
- __u8 reserved;
- __u16 metadata_len;
- __aligned_u64 mask;
- __s32 fd;
- __s32 pid;
-};
-
-struct fanotify_response {
- __s32 fd;
- __u32 response;
-};
-
-/* Legit userspace responses to a _PERM event */
-#define FAN_ALLOW 0x01
-#define FAN_DENY 0x02
-/* No fd set in event */
-#define FAN_NOFD -1
-
-/* Helper functions to deal with fanotify_event_metadata buffers */
-#define FAN_EVENT_METADATA_LEN (sizeof(struct fanotify_event_metadata))
-
-#define FAN_EVENT_NEXT(meta, len) ((len) -= (meta)->event_len, \
- (struct fanotify_event_metadata*)(((char *)(meta)) + \
- (meta)->event_len))
-
-#define FAN_EVENT_OK(meta, len) ((long)(len) >= (long)FAN_EVENT_METADATA_LEN && \
- (long)(meta)->event_len >= (long)FAN_EVENT_METADATA_LEN && \
- (long)(meta)->event_len <= (long)(len))
-
#endif /* _LINUX_FANOTIFY_H */
diff --git a/include/linux/fb.h b/include/linux/fb.h
index ac3f1c6..c7a9571 100644
--- a/include/linux/fb.h
+++ b/include/linux/fb.h
@@ -1,409 +1,10 @@
#ifndef _LINUX_FB_H
#define _LINUX_FB_H
-#include <linux/types.h>
-#include <linux/i2c.h>
-#ifdef __KERNEL__
#include <linux/kgdb.h>
-#endif /* __KERNEL__ */
+#include <uapi/linux/fb.h>
-/* Definitions of frame buffers */
-
-#define FB_MAX 32 /* sufficient for now */
-
-/* ioctls
- 0x46 is 'F' */
-#define FBIOGET_VSCREENINFO 0x4600
-#define FBIOPUT_VSCREENINFO 0x4601
-#define FBIOGET_FSCREENINFO 0x4602
-#define FBIOGETCMAP 0x4604
-#define FBIOPUTCMAP 0x4605
-#define FBIOPAN_DISPLAY 0x4606
-#ifdef __KERNEL__
#define FBIO_CURSOR _IOWR('F', 0x08, struct fb_cursor_user)
-#else
-#define FBIO_CURSOR _IOWR('F', 0x08, struct fb_cursor)
-#endif
-/* 0x4607-0x460B are defined below */
-/* #define FBIOGET_MONITORSPEC 0x460C */
-/* #define FBIOPUT_MONITORSPEC 0x460D */
-/* #define FBIOSWITCH_MONIBIT 0x460E */
-#define FBIOGET_CON2FBMAP 0x460F
-#define FBIOPUT_CON2FBMAP 0x4610
-#define FBIOBLANK 0x4611 /* arg: 0 or vesa level + 1 */
-#define FBIOGET_VBLANK _IOR('F', 0x12, struct fb_vblank)
-#define FBIO_ALLOC 0x4613
-#define FBIO_FREE 0x4614
-#define FBIOGET_GLYPH 0x4615
-#define FBIOGET_HWCINFO 0x4616
-#define FBIOPUT_MODEINFO 0x4617
-#define FBIOGET_DISPINFO 0x4618
-#define FBIO_WAITFORVSYNC _IOW('F', 0x20, __u32)
-
-#define FB_TYPE_PACKED_PIXELS 0 /* Packed Pixels */
-#define FB_TYPE_PLANES 1 /* Non interleaved planes */
-#define FB_TYPE_INTERLEAVED_PLANES 2 /* Interleaved planes */
-#define FB_TYPE_TEXT 3 /* Text/attributes */
-#define FB_TYPE_VGA_PLANES 4 /* EGA/VGA planes */
-#define FB_TYPE_FOURCC 5 /* Type identified by a V4L2 FOURCC */
-
-#define FB_AUX_TEXT_MDA 0 /* Monochrome text */
-#define FB_AUX_TEXT_CGA 1 /* CGA/EGA/VGA Color text */
-#define FB_AUX_TEXT_S3_MMIO 2 /* S3 MMIO fasttext */
-#define FB_AUX_TEXT_MGA_STEP16 3 /* MGA Millenium I: text, attr, 14 reserved bytes */
-#define FB_AUX_TEXT_MGA_STEP8 4 /* other MGAs: text, attr, 6 reserved bytes */
-#define FB_AUX_TEXT_SVGA_GROUP 8 /* 8-15: SVGA tileblit compatible modes */
-#define FB_AUX_TEXT_SVGA_MASK 7 /* lower three bits says step */
-#define FB_AUX_TEXT_SVGA_STEP2 8 /* SVGA text mode: text, attr */
-#define FB_AUX_TEXT_SVGA_STEP4 9 /* SVGA text mode: text, attr, 2 reserved bytes */
-#define FB_AUX_TEXT_SVGA_STEP8 10 /* SVGA text mode: text, attr, 6 reserved bytes */
-#define FB_AUX_TEXT_SVGA_STEP16 11 /* SVGA text mode: text, attr, 14 reserved bytes */
-#define FB_AUX_TEXT_SVGA_LAST 15 /* reserved up to 15 */
-
-#define FB_AUX_VGA_PLANES_VGA4 0 /* 16 color planes (EGA/VGA) */
-#define FB_AUX_VGA_PLANES_CFB4 1 /* CFB4 in planes (VGA) */
-#define FB_AUX_VGA_PLANES_CFB8 2 /* CFB8 in planes (VGA) */
-
-#define FB_VISUAL_MONO01 0 /* Monochr. 1=Black 0=White */
-#define FB_VISUAL_MONO10 1 /* Monochr. 1=White 0=Black */
-#define FB_VISUAL_TRUECOLOR 2 /* True color */
-#define FB_VISUAL_PSEUDOCOLOR 3 /* Pseudo color (like atari) */
-#define FB_VISUAL_DIRECTCOLOR 4 /* Direct color */
-#define FB_VISUAL_STATIC_PSEUDOCOLOR 5 /* Pseudo color readonly */
-#define FB_VISUAL_FOURCC 6 /* Visual identified by a V4L2 FOURCC */
-
-#define FB_ACCEL_NONE 0 /* no hardware accelerator */
-#define FB_ACCEL_ATARIBLITT 1 /* Atari Blitter */
-#define FB_ACCEL_AMIGABLITT 2 /* Amiga Blitter */
-#define FB_ACCEL_S3_TRIO64 3 /* Cybervision64 (S3 Trio64) */
-#define FB_ACCEL_NCR_77C32BLT 4 /* RetinaZ3 (NCR 77C32BLT) */
-#define FB_ACCEL_S3_VIRGE 5 /* Cybervision64/3D (S3 ViRGE) */
-#define FB_ACCEL_ATI_MACH64GX 6 /* ATI Mach 64GX family */
-#define FB_ACCEL_DEC_TGA 7 /* DEC 21030 TGA */
-#define FB_ACCEL_ATI_MACH64CT 8 /* ATI Mach 64CT family */
-#define FB_ACCEL_ATI_MACH64VT 9 /* ATI Mach 64CT family VT class */
-#define FB_ACCEL_ATI_MACH64GT 10 /* ATI Mach 64CT family GT class */
-#define FB_ACCEL_SUN_CREATOR 11 /* Sun Creator/Creator3D */
-#define FB_ACCEL_SUN_CGSIX 12 /* Sun cg6 */
-#define FB_ACCEL_SUN_LEO 13 /* Sun leo/zx */
-#define FB_ACCEL_IMS_TWINTURBO 14 /* IMS Twin Turbo */
-#define FB_ACCEL_3DLABS_PERMEDIA2 15 /* 3Dlabs Permedia 2 */
-#define FB_ACCEL_MATROX_MGA2064W 16 /* Matrox MGA2064W (Millenium) */
-#define FB_ACCEL_MATROX_MGA1064SG 17 /* Matrox MGA1064SG (Mystique) */
-#define FB_ACCEL_MATROX_MGA2164W 18 /* Matrox MGA2164W (Millenium II) */
-#define FB_ACCEL_MATROX_MGA2164W_AGP 19 /* Matrox MGA2164W (Millenium II) */
-#define FB_ACCEL_MATROX_MGAG100 20 /* Matrox G100 (Productiva G100) */
-#define FB_ACCEL_MATROX_MGAG200 21 /* Matrox G200 (Myst, Mill, ...) */
-#define FB_ACCEL_SUN_CG14 22 /* Sun cgfourteen */
-#define FB_ACCEL_SUN_BWTWO 23 /* Sun bwtwo */
-#define FB_ACCEL_SUN_CGTHREE 24 /* Sun cgthree */
-#define FB_ACCEL_SUN_TCX 25 /* Sun tcx */
-#define FB_ACCEL_MATROX_MGAG400 26 /* Matrox G400 */
-#define FB_ACCEL_NV3 27 /* nVidia RIVA 128 */
-#define FB_ACCEL_NV4 28 /* nVidia RIVA TNT */
-#define FB_ACCEL_NV5 29 /* nVidia RIVA TNT2 */
-#define FB_ACCEL_CT_6555x 30 /* C&T 6555x */
-#define FB_ACCEL_3DFX_BANSHEE 31 /* 3Dfx Banshee */
-#define FB_ACCEL_ATI_RAGE128 32 /* ATI Rage128 family */
-#define FB_ACCEL_IGS_CYBER2000 33 /* CyberPro 2000 */
-#define FB_ACCEL_IGS_CYBER2010 34 /* CyberPro 2010 */
-#define FB_ACCEL_IGS_CYBER5000 35 /* CyberPro 5000 */
-#define FB_ACCEL_SIS_GLAMOUR 36 /* SiS 300/630/540 */
-#define FB_ACCEL_3DLABS_PERMEDIA3 37 /* 3Dlabs Permedia 3 */
-#define FB_ACCEL_ATI_RADEON 38 /* ATI Radeon family */
-#define FB_ACCEL_I810 39 /* Intel 810/815 */
-#define FB_ACCEL_SIS_GLAMOUR_2 40 /* SiS 315, 650, 740 */
-#define FB_ACCEL_SIS_XABRE 41 /* SiS 330 ("Xabre") */
-#define FB_ACCEL_I830 42 /* Intel 830M/845G/85x/865G */
-#define FB_ACCEL_NV_10 43 /* nVidia Arch 10 */
-#define FB_ACCEL_NV_20 44 /* nVidia Arch 20 */
-#define FB_ACCEL_NV_30 45 /* nVidia Arch 30 */
-#define FB_ACCEL_NV_40 46 /* nVidia Arch 40 */
-#define FB_ACCEL_XGI_VOLARI_V 47 /* XGI Volari V3XT, V5, V8 */
-#define FB_ACCEL_XGI_VOLARI_Z 48 /* XGI Volari Z7 */
-#define FB_ACCEL_OMAP1610 49 /* TI OMAP16xx */
-#define FB_ACCEL_TRIDENT_TGUI 50 /* Trident TGUI */
-#define FB_ACCEL_TRIDENT_3DIMAGE 51 /* Trident 3DImage */
-#define FB_ACCEL_TRIDENT_BLADE3D 52 /* Trident Blade3D */
-#define FB_ACCEL_TRIDENT_BLADEXP 53 /* Trident BladeXP */
-#define FB_ACCEL_CIRRUS_ALPINE 53 /* Cirrus Logic 543x/544x/5480 */
-#define FB_ACCEL_NEOMAGIC_NM2070 90 /* NeoMagic NM2070 */
-#define FB_ACCEL_NEOMAGIC_NM2090 91 /* NeoMagic NM2090 */
-#define FB_ACCEL_NEOMAGIC_NM2093 92 /* NeoMagic NM2093 */
-#define FB_ACCEL_NEOMAGIC_NM2097 93 /* NeoMagic NM2097 */
-#define FB_ACCEL_NEOMAGIC_NM2160 94 /* NeoMagic NM2160 */
-#define FB_ACCEL_NEOMAGIC_NM2200 95 /* NeoMagic NM2200 */
-#define FB_ACCEL_NEOMAGIC_NM2230 96 /* NeoMagic NM2230 */
-#define FB_ACCEL_NEOMAGIC_NM2360 97 /* NeoMagic NM2360 */
-#define FB_ACCEL_NEOMAGIC_NM2380 98 /* NeoMagic NM2380 */
-#define FB_ACCEL_PXA3XX 99 /* PXA3xx */
-
-#define FB_ACCEL_SAVAGE4 0x80 /* S3 Savage4 */
-#define FB_ACCEL_SAVAGE3D 0x81 /* S3 Savage3D */
-#define FB_ACCEL_SAVAGE3D_MV 0x82 /* S3 Savage3D-MV */
-#define FB_ACCEL_SAVAGE2000 0x83 /* S3 Savage2000 */
-#define FB_ACCEL_SAVAGE_MX_MV 0x84 /* S3 Savage/MX-MV */
-#define FB_ACCEL_SAVAGE_MX 0x85 /* S3 Savage/MX */
-#define FB_ACCEL_SAVAGE_IX_MV 0x86 /* S3 Savage/IX-MV */
-#define FB_ACCEL_SAVAGE_IX 0x87 /* S3 Savage/IX */
-#define FB_ACCEL_PROSAVAGE_PM 0x88 /* S3 ProSavage PM133 */
-#define FB_ACCEL_PROSAVAGE_KM 0x89 /* S3 ProSavage KM133 */
-#define FB_ACCEL_S3TWISTER_P 0x8a /* S3 Twister */
-#define FB_ACCEL_S3TWISTER_K 0x8b /* S3 TwisterK */
-#define FB_ACCEL_SUPERSAVAGE 0x8c /* S3 Supersavage */
-#define FB_ACCEL_PROSAVAGE_DDR 0x8d /* S3 ProSavage DDR */
-#define FB_ACCEL_PROSAVAGE_DDRK 0x8e /* S3 ProSavage DDR-K */
-
-#define FB_ACCEL_PUV3_UNIGFX 0xa0 /* PKUnity-v3 Unigfx */
-
-#define FB_CAP_FOURCC 1 /* Device supports FOURCC-based formats */
-
-struct fb_fix_screeninfo {
- char id[16]; /* identification string eg "TT Builtin" */
- unsigned long smem_start; /* Start of frame buffer mem */
- /* (physical address) */
- __u32 smem_len; /* Length of frame buffer mem */
- __u32 type; /* see FB_TYPE_* */
- __u32 type_aux; /* Interleave for interleaved Planes */
- __u32 visual; /* see FB_VISUAL_* */
- __u16 xpanstep; /* zero if no hardware panning */
- __u16 ypanstep; /* zero if no hardware panning */
- __u16 ywrapstep; /* zero if no hardware ywrap */
- __u32 line_length; /* length of a line in bytes */
- unsigned long mmio_start; /* Start of Memory Mapped I/O */
- /* (physical address) */
- __u32 mmio_len; /* Length of Memory Mapped I/O */
- __u32 accel; /* Indicate to driver which */
- /* specific chip/card we have */
- __u16 capabilities; /* see FB_CAP_* */
- __u16 reserved[2]; /* Reserved for future compatibility */
-};
-
-/* Interpretation of offset for color fields: All offsets are from the right,
- * inside a "pixel" value, which is exactly 'bits_per_pixel' wide (means: you
- * can use the offset as right argument to <<). A pixel afterwards is a bit
- * stream and is written to video memory as that unmodified.
- *
- * For pseudocolor: offset and length should be the same for all color
- * components. Offset specifies the position of the least significant bit
- * of the pallette index in a pixel value. Length indicates the number
- * of available palette entries (i.e. # of entries = 1 << length).
- */
-struct fb_bitfield {
- __u32 offset; /* beginning of bitfield */
- __u32 length; /* length of bitfield */
- __u32 msb_right; /* != 0 : Most significant bit is */
- /* right */
-};
-
-#define FB_NONSTD_HAM 1 /* Hold-And-Modify (HAM) */
-#define FB_NONSTD_REV_PIX_IN_B 2 /* order of pixels in each byte is reversed */
-
-#define FB_ACTIVATE_NOW 0 /* set values immediately (or vbl)*/
-#define FB_ACTIVATE_NXTOPEN 1 /* activate on next open */
-#define FB_ACTIVATE_TEST 2 /* don't set, round up impossible */
-#define FB_ACTIVATE_MASK 15
- /* values */
-#define FB_ACTIVATE_VBL 16 /* activate values on next vbl */
-#define FB_CHANGE_CMAP_VBL 32 /* change colormap on vbl */
-#define FB_ACTIVATE_ALL 64 /* change all VCs on this fb */
-#define FB_ACTIVATE_FORCE 128 /* force apply even when no change*/
-#define FB_ACTIVATE_INV_MODE 256 /* invalidate videomode */
-
-#define FB_ACCELF_TEXT 1 /* (OBSOLETE) see fb_info.flags and vc_mode */
-
-#define FB_SYNC_HOR_HIGH_ACT 1 /* horizontal sync high active */
-#define FB_SYNC_VERT_HIGH_ACT 2 /* vertical sync high active */
-#define FB_SYNC_EXT 4 /* external sync */
-#define FB_SYNC_COMP_HIGH_ACT 8 /* composite sync high active */
-#define FB_SYNC_BROADCAST 16 /* broadcast video timings */
- /* vtotal = 144d/288n/576i => PAL */
- /* vtotal = 121d/242n/484i => NTSC */
-#define FB_SYNC_ON_GREEN 32 /* sync on green */
-
-#define FB_VMODE_NONINTERLACED 0 /* non interlaced */
-#define FB_VMODE_INTERLACED 1 /* interlaced */
-#define FB_VMODE_DOUBLE 2 /* double scan */
-#define FB_VMODE_ODD_FLD_FIRST 4 /* interlaced: top line first */
-#define FB_VMODE_MASK 255
-
-#define FB_VMODE_YWRAP 256 /* ywrap instead of panning */
-#define FB_VMODE_SMOOTH_XPAN 512 /* smooth xpan possible (internally used) */
-#define FB_VMODE_CONUPDATE 512 /* don't update x/yoffset */
-
-/*
- * Display rotation support
- */
-#define FB_ROTATE_UR 0
-#define FB_ROTATE_CW 1
-#define FB_ROTATE_UD 2
-#define FB_ROTATE_CCW 3
-
-#define PICOS2KHZ(a) (1000000000UL/(a))
-#define KHZ2PICOS(a) (1000000000UL/(a))
-
-struct fb_var_screeninfo {
- __u32 xres; /* visible resolution */
- __u32 yres;
- __u32 xres_virtual; /* virtual resolution */
- __u32 yres_virtual;
- __u32 xoffset; /* offset from virtual to visible */
- __u32 yoffset; /* resolution */
-
- __u32 bits_per_pixel; /* guess what */
- __u32 grayscale; /* 0 = color, 1 = grayscale, */
- /* >1 = FOURCC */
- struct fb_bitfield red; /* bitfield in fb mem if true color, */
- struct fb_bitfield green; /* else only length is significant */
- struct fb_bitfield blue;
- struct fb_bitfield transp; /* transparency */
-
- __u32 nonstd; /* != 0 Non standard pixel format */
-
- __u32 activate; /* see FB_ACTIVATE_* */
-
- __u32 height; /* height of picture in mm */
- __u32 width; /* width of picture in mm */
-
- __u32 accel_flags; /* (OBSOLETE) see fb_info.flags */
-
- /* Timing: All values in pixclocks, except pixclock (of course) */
- __u32 pixclock; /* pixel clock in ps (pico seconds) */
- __u32 left_margin; /* time from sync to picture */
- __u32 right_margin; /* time from picture to sync */
- __u32 upper_margin; /* time from sync to picture */
- __u32 lower_margin;
- __u32 hsync_len; /* length of horizontal sync */
- __u32 vsync_len; /* length of vertical sync */
- __u32 sync; /* see FB_SYNC_* */
- __u32 vmode; /* see FB_VMODE_* */
- __u32 rotate; /* angle we rotate counter clockwise */
- __u32 colorspace; /* colorspace for FOURCC-based modes */
- __u32 reserved[4]; /* Reserved for future compatibility */
-};
-
-struct fb_cmap {
- __u32 start; /* First entry */
- __u32 len; /* Number of entries */
- __u16 *red; /* Red values */
- __u16 *green;
- __u16 *blue;
- __u16 *transp; /* transparency, can be NULL */
-};
-
-struct fb_con2fbmap {
- __u32 console;
- __u32 framebuffer;
-};
-
-/* VESA Blanking Levels */
-#define VESA_NO_BLANKING 0
-#define VESA_VSYNC_SUSPEND 1
-#define VESA_HSYNC_SUSPEND 2
-#define VESA_POWERDOWN 3
-
-
-enum {
- /* screen: unblanked, hsync: on, vsync: on */
- FB_BLANK_UNBLANK = VESA_NO_BLANKING,
-
- /* screen: blanked, hsync: on, vsync: on */
- FB_BLANK_NORMAL = VESA_NO_BLANKING + 1,
-
- /* screen: blanked, hsync: on, vsync: off */
- FB_BLANK_VSYNC_SUSPEND = VESA_VSYNC_SUSPEND + 1,
-
- /* screen: blanked, hsync: off, vsync: on */
- FB_BLANK_HSYNC_SUSPEND = VESA_HSYNC_SUSPEND + 1,
-
- /* screen: blanked, hsync: off, vsync: off */
- FB_BLANK_POWERDOWN = VESA_POWERDOWN + 1
-};
-
-#define FB_VBLANK_VBLANKING 0x001 /* currently in a vertical blank */
-#define FB_VBLANK_HBLANKING 0x002 /* currently in a horizontal blank */
-#define FB_VBLANK_HAVE_VBLANK 0x004 /* vertical blanks can be detected */
-#define FB_VBLANK_HAVE_HBLANK 0x008 /* horizontal blanks can be detected */
-#define FB_VBLANK_HAVE_COUNT 0x010 /* global retrace counter is available */
-#define FB_VBLANK_HAVE_VCOUNT 0x020 /* the vcount field is valid */
-#define FB_VBLANK_HAVE_HCOUNT 0x040 /* the hcount field is valid */
-#define FB_VBLANK_VSYNCING 0x080 /* currently in a vsync */
-#define FB_VBLANK_HAVE_VSYNC 0x100 /* verical syncs can be detected */
-
-struct fb_vblank {
- __u32 flags; /* FB_VBLANK flags */
- __u32 count; /* counter of retraces since boot */
- __u32 vcount; /* current scanline position */
- __u32 hcount; /* current scandot position */
- __u32 reserved[4]; /* reserved for future compatibility */
-};
-
-/* Internal HW accel */
-#define ROP_COPY 0
-#define ROP_XOR 1
-
-struct fb_copyarea {
- __u32 dx;
- __u32 dy;
- __u32 width;
- __u32 height;
- __u32 sx;
- __u32 sy;
-};
-
-struct fb_fillrect {
- __u32 dx; /* screen-relative */
- __u32 dy;
- __u32 width;
- __u32 height;
- __u32 color;
- __u32 rop;
-};
-
-struct fb_image {
- __u32 dx; /* Where to place image */
- __u32 dy;
- __u32 width; /* Size of image */
- __u32 height;
- __u32 fg_color; /* Only used when a mono bitmap */
- __u32 bg_color;
- __u8 depth; /* Depth of the image */
- const char *data; /* Pointer to image data */
- struct fb_cmap cmap; /* color map info */
-};
-
-/*
- * hardware cursor control
- */
-
-#define FB_CUR_SETIMAGE 0x01
-#define FB_CUR_SETPOS 0x02
-#define FB_CUR_SETHOT 0x04
-#define FB_CUR_SETCMAP 0x08
-#define FB_CUR_SETSHAPE 0x10
-#define FB_CUR_SETSIZE 0x20
-#define FB_CUR_SETALL 0xFF
-
-struct fbcurpos {
- __u16 x, y;
-};
-
-struct fb_cursor {
- __u16 set; /* what to set */
- __u16 enable; /* cursor on/off */
- __u16 rop; /* bitop operation */
- const char *mask; /* cursor mask bits */
- struct fbcurpos hot; /* cursor hot spot */
- struct fb_image image; /* Cursor image */
-};
-
-#ifdef CONFIG_FB_BACKLIGHT
-/* Settings for the generic backlight code */
-#define FB_BACKLIGHT_LEVELS 128
-#define FB_BACKLIGHT_MAX 0xFF
-#endif
-
-#ifdef __KERNEL__
#include <linux/fs.h>
#include <linux/init.h>
@@ -1181,6 +782,4 @@
const struct fb_videomode *default_mode,
unsigned int default_bpp);
-#endif /* __KERNEL__ */
-
#endif /* _LINUX_FB_H */
diff --git a/include/linux/fcntl.h b/include/linux/fcntl.h
index f550f89..76ce329 100644
--- a/include/linux/fcntl.h
+++ b/include/linux/fcntl.h
@@ -1,54 +1,8 @@
#ifndef _LINUX_FCNTL_H
#define _LINUX_FCNTL_H
-#include <asm/fcntl.h>
+#include <uapi/linux/fcntl.h>
-#define F_SETLEASE (F_LINUX_SPECIFIC_BASE + 0)
-#define F_GETLEASE (F_LINUX_SPECIFIC_BASE + 1)
-
-/*
- * Cancel a blocking posix lock; internal use only until we expose an
- * asynchronous lock api to userspace:
- */
-#define F_CANCELLK (F_LINUX_SPECIFIC_BASE + 5)
-
-/* Create a file descriptor with FD_CLOEXEC set. */
-#define F_DUPFD_CLOEXEC (F_LINUX_SPECIFIC_BASE + 6)
-
-/*
- * Request nofications on a directory.
- * See below for events that may be notified.
- */
-#define F_NOTIFY (F_LINUX_SPECIFIC_BASE+2)
-
-/*
- * Set and get of pipe page size array
- */
-#define F_SETPIPE_SZ (F_LINUX_SPECIFIC_BASE + 7)
-#define F_GETPIPE_SZ (F_LINUX_SPECIFIC_BASE + 8)
-
-/*
- * Types of directory notifications that may be requested.
- */
-#define DN_ACCESS 0x00000001 /* File accessed */
-#define DN_MODIFY 0x00000002 /* File modified */
-#define DN_CREATE 0x00000004 /* File created */
-#define DN_DELETE 0x00000008 /* File removed */
-#define DN_RENAME 0x00000010 /* File renamed */
-#define DN_ATTRIB 0x00000020 /* File changed attibutes */
-#define DN_MULTISHOT 0x80000000 /* Don't remove notifier */
-
-#define AT_FDCWD -100 /* Special value used to indicate
- openat should use the current
- working directory. */
-#define AT_SYMLINK_NOFOLLOW 0x100 /* Do not follow symbolic links. */
-#define AT_REMOVEDIR 0x200 /* Remove directory instead of
- unlinking file. */
-#define AT_SYMLINK_FOLLOW 0x400 /* Follow symbolic links. */
-#define AT_NO_AUTOMOUNT 0x800 /* Suppress terminal automount traversal */
-#define AT_EMPTY_PATH 0x1000 /* Allow empty relative pathname */
-
-#ifdef __KERNEL__
#ifndef force_o_largefile
#define force_o_largefile() (BITS_PER_LONG != 32)
@@ -74,6 +28,4 @@
#define IS_SETLK(cmd) (IS_SETLK32(cmd) || IS_SETLK64(cmd))
#define IS_SETLKW(cmd) (IS_SETLKW32(cmd) || IS_SETLKW64(cmd))
-#endif /* __KERNEL__ */
-
#endif
diff --git a/include/linux/fd.h b/include/linux/fd.h
index 72202b1..69275bc 100644
--- a/include/linux/fd.h
+++ b/include/linux/fd.h
@@ -1,384 +1,8 @@
#ifndef _LINUX_FD_H
#define _LINUX_FD_H
-#include <linux/ioctl.h>
-#include <linux/compiler.h>
+#include <uapi/linux/fd.h>
-/* New file layout: Now the ioctl definitions immediately follow the
- * definitions of the structures that they use */
-
-/*
- * Geometry
- */
-struct floppy_struct {
- unsigned int size, /* nr of sectors total */
- sect, /* sectors per track */
- head, /* nr of heads */
- track, /* nr of tracks */
- stretch; /* bit 0 !=0 means double track steps */
- /* bit 1 != 0 means swap sides */
- /* bits 2..9 give the first sector */
- /* number (the LSB is flipped) */
-#define FD_STRETCH 1
-#define FD_SWAPSIDES 2
-#define FD_ZEROBASED 4
-#define FD_SECTBASEMASK 0x3FC
-#define FD_MKSECTBASE(s) (((s) ^ 1) << 2)
-#define FD_SECTBASE(floppy) ((((floppy)->stretch & FD_SECTBASEMASK) >> 2) ^ 1)
-
- unsigned char gap, /* gap1 size */
-
- rate, /* data rate. |= 0x40 for perpendicular */
-#define FD_2M 0x4
-#define FD_SIZECODEMASK 0x38
-#define FD_SIZECODE(floppy) (((((floppy)->rate&FD_SIZECODEMASK)>> 3)+ 2) %8)
-#define FD_SECTSIZE(floppy) ( (floppy)->rate & FD_2M ? \
- 512 : 128 << FD_SIZECODE(floppy) )
-#define FD_PERP 0x40
-
- spec1, /* stepping rate, head unload time */
- fmt_gap; /* gap2 size */
- const char * name; /* used only for predefined formats */
-};
-
-
-/* commands needing write access have 0x40 set */
-/* commands needing super user access have 0x80 set */
-
-#define FDCLRPRM _IO(2, 0x41)
-/* clear user-defined parameters */
-
-#define FDSETPRM _IOW(2, 0x42, struct floppy_struct)
-#define FDSETMEDIAPRM FDSETPRM
-/* set user-defined parameters for current media */
-
-#define FDDEFPRM _IOW(2, 0x43, struct floppy_struct)
-#define FDGETPRM _IOR(2, 0x04, struct floppy_struct)
-#define FDDEFMEDIAPRM FDDEFPRM
-#define FDGETMEDIAPRM FDGETPRM
-/* set/get disk parameters */
-
-
-#define FDMSGON _IO(2,0x45)
-#define FDMSGOFF _IO(2,0x46)
-/* issue/don't issue kernel messages on media type change */
-
-
-/*
- * Formatting (obsolete)
- */
-#define FD_FILL_BYTE 0xF6 /* format fill byte. */
-
-struct format_descr {
- unsigned int device,head,track;
-};
-
-#define FDFMTBEG _IO(2,0x47)
-/* begin formatting a disk */
-#define FDFMTTRK _IOW(2,0x48, struct format_descr)
-/* format the specified track */
-#define FDFMTEND _IO(2,0x49)
-/* end formatting a disk */
-
-
-/*
- * Error thresholds
- */
-struct floppy_max_errors {
- unsigned int
- abort, /* number of errors to be reached before aborting */
- read_track, /* maximal number of errors permitted to read an
- * entire track at once */
- reset, /* maximal number of errors before a reset is tried */
- recal, /* maximal number of errors before a recalibrate is
- * tried */
-
- /*
- * Threshold for reporting FDC errors to the console.
- * Setting this to zero may flood your screen when using
- * ultra cheap floppies ;-)
- */
- reporting;
-
-};
-
-#define FDSETEMSGTRESH _IO(2,0x4a)
-/* set fdc error reporting threshold */
-
-#define FDFLUSH _IO(2,0x4b)
-/* flush buffers for media; either for verifying media, or for
- * handling a media change without closing the file descriptor */
-
-#define FDSETMAXERRS _IOW(2, 0x4c, struct floppy_max_errors)
-#define FDGETMAXERRS _IOR(2, 0x0e, struct floppy_max_errors)
-/* set/get abortion and read_track threshold. See also floppy_drive_params
- * structure */
-
-
-typedef char floppy_drive_name[16];
-#define FDGETDRVTYP _IOR(2, 0x0f, floppy_drive_name)
-/* get drive type: 5 1/4 or 3 1/2 */
-
-
-/*
- * Drive parameters (user modifiable)
- */
-struct floppy_drive_params {
- signed char cmos; /* CMOS type */
-
- /* Spec2 is (HLD<<1 | ND), where HLD is head load time (1=2ms, 2=4 ms
- * etc) and ND is set means no DMA. Hardcoded to 6 (HLD=6ms, use DMA).
- */
- unsigned long max_dtr; /* Step rate, usec */
- unsigned long hlt; /* Head load/settle time, msec */
- unsigned long hut; /* Head unload time (remnant of
- * 8" drives) */
- unsigned long srt; /* Step rate, usec */
-
- unsigned long spinup; /* time needed for spinup (expressed
- * in jiffies) */
- unsigned long spindown; /* timeout needed for spindown */
- unsigned char spindown_offset; /* decides in which position the disk
- * will stop */
- unsigned char select_delay; /* delay to wait after select */
- unsigned char rps; /* rotations per second */
- unsigned char tracks; /* maximum number of tracks */
- unsigned long timeout; /* timeout for interrupt requests */
-
- unsigned char interleave_sect; /* if there are more sectors, use
- * interleave */
-
- struct floppy_max_errors max_errors;
-
- char flags; /* various flags, including ftd_msg */
-/*
- * Announce successful media type detection and media information loss after
- * disk changes.
- * Also used to enable/disable printing of overrun warnings.
- */
-
-#define FTD_MSG 0x10
-#define FD_BROKEN_DCL 0x20
-#define FD_DEBUG 0x02
-#define FD_SILENT_DCL_CLEAR 0x4
-#define FD_INVERTED_DCL 0x80 /* must be 0x80, because of hardware
- considerations */
-
- char read_track; /* use readtrack during probing? */
-
-/*
- * Auto-detection. Each drive type has eight formats which are
- * used in succession to try to read the disk. If the FDC cannot lock onto
- * the disk, the next format is tried. This uses the variable 'probing'.
- */
- short autodetect[8]; /* autodetected formats */
-
- int checkfreq; /* how often should the drive be checked for disk
- * changes */
- int native_format; /* native format of this drive */
-};
-
-enum {
- FD_NEED_TWADDLE_BIT, /* more magic */
- FD_VERIFY_BIT, /* inquire for write protection */
- FD_DISK_NEWCHANGE_BIT, /* change detected, and no action undertaken yet
- * to clear media change status */
- FD_UNUSED_BIT,
- FD_DISK_CHANGED_BIT, /* disk has been changed since last i/o */
- FD_DISK_WRITABLE_BIT /* disk is writable */
-};
-
-#define FDSETDRVPRM _IOW(2, 0x90, struct floppy_drive_params)
-#define FDGETDRVPRM _IOR(2, 0x11, struct floppy_drive_params)
-/* set/get drive parameters */
-
-
-/*
- * Current drive state (not directly modifiable by user, readonly)
- */
-struct floppy_drive_struct {
- unsigned long flags;
-/* values for these flags */
-#define FD_NEED_TWADDLE (1 << FD_NEED_TWADDLE_BIT)
-#define FD_VERIFY (1 << FD_VERIFY_BIT)
-#define FD_DISK_NEWCHANGE (1 << FD_DISK_NEWCHANGE_BIT)
-#define FD_DISK_CHANGED (1 << FD_DISK_CHANGED_BIT)
-#define FD_DISK_WRITABLE (1 << FD_DISK_WRITABLE_BIT)
-
- unsigned long spinup_date;
- unsigned long select_date;
- unsigned long first_read_date;
- short probed_format;
- short track; /* current track */
- short maxblock; /* id of highest block read */
- short maxtrack; /* id of highest half track read */
- int generation; /* how many diskchanges? */
-
-/*
- * (User-provided) media information is _not_ discarded after a media change
- * if the corresponding keep_data flag is non-zero. Positive values are
- * decremented after each probe.
- */
- int keep_data;
-
- /* Prevent "aliased" accesses. */
- int fd_ref;
- int fd_device;
- unsigned long last_checked; /* when was the drive last checked for a disk
- * change? */
-
- char *dmabuf;
- int bufblocks;
-};
-
-#define FDGETDRVSTAT _IOR(2, 0x12, struct floppy_drive_struct)
-#define FDPOLLDRVSTAT _IOR(2, 0x13, struct floppy_drive_struct)
-/* get drive state: GET returns the cached state, POLL polls for new state */
-
-
-/*
- * reset FDC
- */
-enum reset_mode {
- FD_RESET_IF_NEEDED, /* reset only if the reset flags is set */
- FD_RESET_IF_RAWCMD, /* obsolete */
- FD_RESET_ALWAYS /* reset always */
-};
-#define FDRESET _IO(2, 0x54)
-
-
-/*
- * FDC state
- */
-struct floppy_fdc_state {
- int spec1; /* spec1 value last used */
- int spec2; /* spec2 value last used */
- int dtr;
- unsigned char version; /* FDC version code */
- unsigned char dor;
- unsigned long address; /* io address */
- unsigned int rawcmd:2;
- unsigned int reset:1;
- unsigned int need_configure:1;
- unsigned int perp_mode:2;
- unsigned int has_fifo:1;
- unsigned int driver_version; /* version code for floppy driver */
-#define FD_DRIVER_VERSION 0x100
-/* user programs using the floppy API should use floppy_fdc_state to
- * get the version number of the floppy driver that they are running
- * on. If this version number is bigger than the one compiled into the
- * user program (the FD_DRIVER_VERSION define), it should be prepared
- * to bigger structures
- */
-
- unsigned char track[4];
- /* Position of the heads of the 4 units attached to this FDC,
- * as stored on the FDC. In the future, the position as stored
- * on the FDC might not agree with the actual physical
- * position of these drive heads. By allowing such
- * disagreement, it will be possible to reset the FDC without
- * incurring the expensive cost of repositioning all heads.
- * Right now, these positions are hard wired to 0. */
-
-};
-
-#define FDGETFDCSTAT _IOR(2, 0x15, struct floppy_fdc_state)
-
-
-/*
- * Asynchronous Write error tracking
- */
-struct floppy_write_errors {
- /* Write error logging.
- *
- * These fields can be cleared with the FDWERRORCLR ioctl.
- * Only writes that were attempted but failed due to a physical media
- * error are logged. write(2) calls that fail and return an error code
- * to the user process are not counted.
- */
-
- unsigned int write_errors; /* number of physical write errors
- * encountered */
-
- /* position of first and last write errors */
- unsigned long first_error_sector;
- int first_error_generation;
- unsigned long last_error_sector;
- int last_error_generation;
-
- unsigned int badness; /* highest retry count for a read or write
- * operation */
-};
-
-#define FDWERRORCLR _IO(2, 0x56)
-/* clear write error and badness information */
-#define FDWERRORGET _IOR(2, 0x17, struct floppy_write_errors)
-/* get write error and badness information */
-
-
-/*
- * Raw commands
- */
-/* new interface flag: now we can do them in batches */
-#define FDHAVEBATCHEDRAWCMD
-
-struct floppy_raw_cmd {
- unsigned int flags;
-#define FD_RAW_READ 1
-#define FD_RAW_WRITE 2
-#define FD_RAW_NO_MOTOR 4
-#define FD_RAW_DISK_CHANGE 4 /* out: disk change flag was set */
-#define FD_RAW_INTR 8 /* wait for an interrupt */
-#define FD_RAW_SPIN 0x10 /* spin up the disk for this command */
-#define FD_RAW_NO_MOTOR_AFTER 0x20 /* switch the motor off after command
- * completion */
-#define FD_RAW_NEED_DISK 0x40 /* this command needs a disk to be present */
-#define FD_RAW_NEED_SEEK 0x80 /* this command uses an implied seek (soft) */
-
-/* more "in" flags */
-#define FD_RAW_MORE 0x100 /* more records follow */
-#define FD_RAW_STOP_IF_FAILURE 0x200 /* stop if we encounter a failure */
-#define FD_RAW_STOP_IF_SUCCESS 0x400 /* stop if command successful */
-#define FD_RAW_SOFTFAILURE 0x800 /* consider the return value for failure
- * detection too */
-
-/* more "out" flags */
-#define FD_RAW_FAILURE 0x10000 /* command sent to fdc, fdc returned error */
-#define FD_RAW_HARDFAILURE 0x20000 /* fdc had to be reset, or timed out */
-
- void __user *data;
- char *kernel_data; /* location of data buffer in the kernel */
- struct floppy_raw_cmd *next; /* used for chaining of raw cmd's
- * within the kernel */
- long length; /* in: length of dma transfer. out: remaining bytes */
- long phys_length; /* physical length, if different from dma length */
- int buffer_length; /* length of allocated buffer */
-
- unsigned char rate;
- unsigned char cmd_count;
- unsigned char cmd[16];
- unsigned char reply_count;
- unsigned char reply[16];
- int track;
- int resultcode;
-
- int reserved1;
- int reserved2;
-};
-
-#define FDRAWCMD _IO(2, 0x58)
-/* send a raw command to the fdc. Structure size not included, because of
- * batches */
-
-#define FDTWADDLE _IO(2, 0x59)
-/* flicker motor-on bit before reading a sector. Experimental */
-
-
-#define FDEJECT _IO(2, 0x5a)
-/* eject the disk */
-
-
-#ifdef __KERNEL__
#ifdef CONFIG_COMPAT
#include <linux/compat.h>
@@ -398,5 +22,3 @@
#define FDGETPRM32 _IOR(2, 0x04, struct compat_floppy_struct)
#endif
#endif
-
-#endif
diff --git a/include/linux/filter.h b/include/linux/filter.h
index 2ded090..24d251f 100644
--- a/include/linux/filter.h
+++ b/include/linux/filter.h
@@ -1,141 +1,12 @@
/*
* Linux Socket Filter Data Structures
*/
-
#ifndef __LINUX_FILTER_H__
#define __LINUX_FILTER_H__
-#include <linux/compiler.h>
-#include <linux/types.h>
-
-#ifdef __KERNEL__
#include <linux/atomic.h>
#include <linux/compat.h>
-#endif
-
-/*
- * Current version of the filter code architecture.
- */
-#define BPF_MAJOR_VERSION 1
-#define BPF_MINOR_VERSION 1
-
-/*
- * Try and keep these values and structures similar to BSD, especially
- * the BPF code definitions which need to match so you can share filters
- */
-
-struct sock_filter { /* Filter block */
- __u16 code; /* Actual filter code */
- __u8 jt; /* Jump true */
- __u8 jf; /* Jump false */
- __u32 k; /* Generic multiuse field */
-};
-
-struct sock_fprog { /* Required for SO_ATTACH_FILTER. */
- unsigned short len; /* Number of filter blocks */
- struct sock_filter __user *filter;
-};
-
-/*
- * Instruction classes
- */
-
-#define BPF_CLASS(code) ((code) & 0x07)
-#define BPF_LD 0x00
-#define BPF_LDX 0x01
-#define BPF_ST 0x02
-#define BPF_STX 0x03
-#define BPF_ALU 0x04
-#define BPF_JMP 0x05
-#define BPF_RET 0x06
-#define BPF_MISC 0x07
-
-/* ld/ldx fields */
-#define BPF_SIZE(code) ((code) & 0x18)
-#define BPF_W 0x00
-#define BPF_H 0x08
-#define BPF_B 0x10
-#define BPF_MODE(code) ((code) & 0xe0)
-#define BPF_IMM 0x00
-#define BPF_ABS 0x20
-#define BPF_IND 0x40
-#define BPF_MEM 0x60
-#define BPF_LEN 0x80
-#define BPF_MSH 0xa0
-
-/* alu/jmp fields */
-#define BPF_OP(code) ((code) & 0xf0)
-#define BPF_ADD 0x00
-#define BPF_SUB 0x10
-#define BPF_MUL 0x20
-#define BPF_DIV 0x30
-#define BPF_OR 0x40
-#define BPF_AND 0x50
-#define BPF_LSH 0x60
-#define BPF_RSH 0x70
-#define BPF_NEG 0x80
-#define BPF_MOD 0x90
-#define BPF_XOR 0xa0
-
-#define BPF_JA 0x00
-#define BPF_JEQ 0x10
-#define BPF_JGT 0x20
-#define BPF_JGE 0x30
-#define BPF_JSET 0x40
-#define BPF_SRC(code) ((code) & 0x08)
-#define BPF_K 0x00
-#define BPF_X 0x08
-
-/* ret - BPF_K and BPF_X also apply */
-#define BPF_RVAL(code) ((code) & 0x18)
-#define BPF_A 0x10
-
-/* misc */
-#define BPF_MISCOP(code) ((code) & 0xf8)
-#define BPF_TAX 0x00
-#define BPF_TXA 0x80
-
-#ifndef BPF_MAXINSNS
-#define BPF_MAXINSNS 4096
-#endif
-
-/*
- * Macros for filter block array initializers.
- */
-#ifndef BPF_STMT
-#define BPF_STMT(code, k) { (unsigned short)(code), 0, 0, k }
-#endif
-#ifndef BPF_JUMP
-#define BPF_JUMP(code, k, jt, jf) { (unsigned short)(code), jt, jf, k }
-#endif
-
-/*
- * Number of scratch memory words for: BPF_ST and BPF_STX
- */
-#define BPF_MEMWORDS 16
-
-/* RATIONALE. Negative offsets are invalid in BPF.
- We use them to reference ancillary data.
- Unlike introduction new instructions, it does not break
- existing compilers/optimizers.
- */
-#define SKF_AD_OFF (-0x1000)
-#define SKF_AD_PROTOCOL 0
-#define SKF_AD_PKTTYPE 4
-#define SKF_AD_IFINDEX 8
-#define SKF_AD_NLATTR 12
-#define SKF_AD_NLATTR_NEST 16
-#define SKF_AD_MARK 20
-#define SKF_AD_QUEUE 24
-#define SKF_AD_HATYPE 28
-#define SKF_AD_RXHASH 32
-#define SKF_AD_CPU 36
-#define SKF_AD_ALU_XOR_X 40
-#define SKF_AD_MAX 44
-#define SKF_NET_OFF (-0x100000)
-#define SKF_LL_OFF (-0x200000)
-
-#ifdef __KERNEL__
+#include <uapi/linux/filter.h>
#ifdef CONFIG_COMPAT
/*
@@ -254,6 +125,4 @@
BPF_S_ANC_SECCOMP_LD_W,
};
-#endif /* __KERNEL__ */
-
#endif /* __LINUX_FILTER_H__ */
diff --git a/include/linux/flat.h b/include/linux/flat.h
index ec56852..2c1eb15 100644
--- a/include/linux/flat.h
+++ b/include/linux/flat.h
@@ -6,58 +6,12 @@
* This file provides the definitions and structures needed to
* support uClinux flat-format executables.
*/
-
#ifndef _LINUX_FLAT_H
#define _LINUX_FLAT_H
-#ifdef __KERNEL__
#include <asm/flat.h>
-#endif
+#include <uapi/linux/flat.h>
-#define FLAT_VERSION 0x00000004L
-
-#ifdef CONFIG_BINFMT_SHARED_FLAT
-#define MAX_SHARED_LIBS (4)
-#else
-#define MAX_SHARED_LIBS (1)
-#endif
-
-/*
- * To make everything easier to port and manage cross platform
- * development, all fields are in network byte order.
- */
-
-struct flat_hdr {
- char magic[4];
- unsigned long rev; /* version (as above) */
- unsigned long entry; /* Offset of first executable instruction
- with text segment from beginning of file */
- unsigned long data_start; /* Offset of data segment from beginning of
- file */
- unsigned long data_end; /* Offset of end of data segment
- from beginning of file */
- unsigned long bss_end; /* Offset of end of bss segment from beginning
- of file */
-
- /* (It is assumed that data_end through bss_end forms the bss segment.) */
-
- unsigned long stack_size; /* Size of stack, in bytes */
- unsigned long reloc_start; /* Offset of relocation records from
- beginning of file */
- unsigned long reloc_count; /* Number of relocation records */
- unsigned long flags;
- unsigned long build_date; /* When the program/library was built */
- unsigned long filler[5]; /* Reservered, set to zero */
-};
-
-#define FLAT_FLAG_RAM 0x0001 /* load program entirely into RAM */
-#define FLAT_FLAG_GOTPIC 0x0002 /* program is PIC with GOT */
-#define FLAT_FLAG_GZIP 0x0004 /* all but the header is compressed */
-#define FLAT_FLAG_GZDATA 0x0008 /* only data/relocs are compressed (for XIP) */
-#define FLAT_FLAG_KTRACE 0x0010 /* output useful kernel trace for debugging */
-
-
-#ifdef __KERNEL__ /* so systems without linux headers can compile the apps */
/*
* While it would be nice to keep this header clean, users of older
* tools still need this support in the kernel. So this section is
@@ -95,6 +49,4 @@
} reloc;
} flat_v2_reloc_t;
-#endif /* __KERNEL__ */
-
#endif /* _LINUX_FLAT_H */
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 65fbf57..001c7cf 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -1,121 +1,68 @@
#ifndef _LINUX_FS_H
#define _LINUX_FS_H
-/*
- * This file has definitions for some important file table
- * structures etc.
- */
-#include <linux/limits.h>
-#include <linux/ioctl.h>
+#include <linux/linkage.h>
+#include <linux/wait.h>
+#include <linux/kdev_t.h>
+#include <linux/dcache.h>
+#include <linux/path.h>
+#include <linux/stat.h>
+#include <linux/cache.h>
+#include <linux/list.h>
+#include <linux/radix-tree.h>
+#include <linux/rbtree.h>
+#include <linux/init.h>
+#include <linux/pid.h>
+#include <linux/bug.h>
+#include <linux/mutex.h>
+#include <linux/capability.h>
+#include <linux/semaphore.h>
+#include <linux/fiemap.h>
+#include <linux/rculist_bl.h>
+#include <linux/atomic.h>
+#include <linux/shrinker.h>
+#include <linux/migrate_mode.h>
+#include <linux/uidgid.h>
+#include <linux/lockdep.h>
+#include <linux/percpu-rwsem.h>
#include <linux/blk_types.h>
-#include <linux/types.h>
-/*
- * It's silly to have NR_OPEN bigger than NR_FILE, but you can change
- * the file limit at runtime and only root can increase the per-process
- * nr_file rlimit, so it's safe to set up a ridiculously high absolute
- * upper limit on files-per-process.
- *
- * Some programs (notably those using select()) may have to be
- * recompiled to take full advantage of the new limits..
- */
+#include <asm/byteorder.h>
+#include <uapi/linux/fs.h>
-/* Fixed constants first: */
-#undef NR_OPEN
-#define INR_OPEN_CUR 1024 /* Initial setting for nfile rlimits */
-#define INR_OPEN_MAX 4096 /* Hard limit for nfile rlimits */
+struct export_operations;
+struct hd_geometry;
+struct iovec;
+struct nameidata;
+struct kiocb;
+struct kobject;
+struct pipe_inode_info;
+struct poll_table_struct;
+struct kstatfs;
+struct vm_area_struct;
+struct vfsmount;
+struct cred;
+struct swap_info_struct;
-#define BLOCK_SIZE_BITS 10
-#define BLOCK_SIZE (1<<BLOCK_SIZE_BITS)
+extern void __init inode_init(void);
+extern void __init inode_init_early(void);
+extern void __init files_init(unsigned long);
-#define SEEK_SET 0 /* seek relative to beginning of file */
-#define SEEK_CUR 1 /* seek relative to current file position */
-#define SEEK_END 2 /* seek relative to end of file */
-#define SEEK_DATA 3 /* seek to the next data */
-#define SEEK_HOLE 4 /* seek to the next hole */
-#define SEEK_MAX SEEK_HOLE
+extern struct files_stat_struct files_stat;
+extern unsigned long get_max_files(void);
+extern int sysctl_nr_open;
+extern struct inodes_stat_t inodes_stat;
+extern int leases_enable, lease_break_time;
+extern int sysctl_protected_symlinks;
+extern int sysctl_protected_hardlinks;
-struct fstrim_range {
- __u64 start;
- __u64 len;
- __u64 minlen;
-};
-
-/* And dynamically-tunable limits and defaults: */
-struct files_stat_struct {
- unsigned long nr_files; /* read only */
- unsigned long nr_free_files; /* read only */
- unsigned long max_files; /* tunable */
-};
-
-struct inodes_stat_t {
- int nr_inodes;
- int nr_unused;
- int dummy[5]; /* padding for sysctl ABI compatibility */
-};
-
-
-#define NR_FILE 8192 /* this can well be larger on a larger system */
-
-#define MAY_EXEC 0x00000001
-#define MAY_WRITE 0x00000002
-#define MAY_READ 0x00000004
-#define MAY_APPEND 0x00000008
-#define MAY_ACCESS 0x00000010
-#define MAY_OPEN 0x00000020
-#define MAY_CHDIR 0x00000040
-/* called from RCU mode, don't block */
-#define MAY_NOT_BLOCK 0x00000080
-
-/*
- * flags in file.f_mode. Note that FMODE_READ and FMODE_WRITE must correspond
- * to O_WRONLY and O_RDWR via the strange trick in __dentry_open()
- */
-
-/* file is open for reading */
-#define FMODE_READ ((__force fmode_t)0x1)
-/* file is open for writing */
-#define FMODE_WRITE ((__force fmode_t)0x2)
-/* file is seekable */
-#define FMODE_LSEEK ((__force fmode_t)0x4)
-/* file can be accessed using pread */
-#define FMODE_PREAD ((__force fmode_t)0x8)
-/* file can be accessed using pwrite */
-#define FMODE_PWRITE ((__force fmode_t)0x10)
-/* File is opened for execution with sys_execve / sys_uselib */
-#define FMODE_EXEC ((__force fmode_t)0x20)
-/* File is opened with O_NDELAY (only set for block devices) */
-#define FMODE_NDELAY ((__force fmode_t)0x40)
-/* File is opened with O_EXCL (only set for block devices) */
-#define FMODE_EXCL ((__force fmode_t)0x80)
-/* File is opened using open(.., 3, ..) and is writeable only for ioctls
- (specialy hack for floppy.c) */
-#define FMODE_WRITE_IOCTL ((__force fmode_t)0x100)
-/* 32bit hashes as llseek() offset (for directories) */
-#define FMODE_32BITHASH ((__force fmode_t)0x200)
-/* 64bit hashes as llseek() offset (for directories) */
-#define FMODE_64BITHASH ((__force fmode_t)0x400)
-
-/*
- * Don't update ctime and mtime.
- *
- * Currently a special hack for the XFS open_by_handle ioctl, but we'll
- * hopefully graduate it to a proper O_CMTIME flag supported by open(2) soon.
- */
-#define FMODE_NOCMTIME ((__force fmode_t)0x800)
-
-/* Expect random access pattern */
-#define FMODE_RANDOM ((__force fmode_t)0x1000)
-
-/* File is huge (eg. /dev/kmem): treat loff_t as unsigned */
-#define FMODE_UNSIGNED_OFFSET ((__force fmode_t)0x2000)
-
-/* File is opened with O_PATH; almost nothing can be done with it */
-#define FMODE_PATH ((__force fmode_t)0x4000)
-
-/* File was opened by fanotify and shouldn't generate fanotify events */
-#define FMODE_NONOTIFY ((__force fmode_t)0x1000000)
+struct buffer_head;
+typedef int (get_block_t)(struct inode *inode, sector_t iblock,
+ struct buffer_head *bh_result, int create);
+typedef void (dio_iodone_t)(struct kiocb *iocb, loff_t offset,
+ ssize_t bytes, void *private, int ret,
+ bool is_async);
/*
* The below are the various read and write types that we support. Some of
@@ -175,284 +122,6 @@
#define WRITE_FUA (WRITE | REQ_SYNC | REQ_NOIDLE | REQ_FUA)
#define WRITE_FLUSH_FUA (WRITE | REQ_SYNC | REQ_NOIDLE | REQ_FLUSH | REQ_FUA)
-
-/*
- * Flag for rw_copy_check_uvector and compat_rw_copy_check_uvector
- * that indicates that they should check the contents of the iovec are
- * valid, but not check the memory that the iovec elements
- * points too.
- */
-#define CHECK_IOVEC_ONLY -1
-
-#define SEL_IN 1
-#define SEL_OUT 2
-#define SEL_EX 4
-
-/* public flags for file_system_type */
-#define FS_REQUIRES_DEV 1
-#define FS_BINARY_MOUNTDATA 2
-#define FS_HAS_SUBTYPE 4
-#define FS_REVAL_DOT 16384 /* Check the paths ".", ".." for staleness */
-#define FS_RENAME_DOES_D_MOVE 32768 /* FS will handle d_move()
- * during rename() internally.
- */
-
-/*
- * These are the fs-independent mount-flags: up to 32 flags are supported
- */
-#define MS_RDONLY 1 /* Mount read-only */
-#define MS_NOSUID 2 /* Ignore suid and sgid bits */
-#define MS_NODEV 4 /* Disallow access to device special files */
-#define MS_NOEXEC 8 /* Disallow program execution */
-#define MS_SYNCHRONOUS 16 /* Writes are synced at once */
-#define MS_REMOUNT 32 /* Alter flags of a mounted FS */
-#define MS_MANDLOCK 64 /* Allow mandatory locks on an FS */
-#define MS_DIRSYNC 128 /* Directory modifications are synchronous */
-#define MS_NOATIME 1024 /* Do not update access times. */
-#define MS_NODIRATIME 2048 /* Do not update directory access times */
-#define MS_BIND 4096
-#define MS_MOVE 8192
-#define MS_REC 16384
-#define MS_VERBOSE 32768 /* War is peace. Verbosity is silence.
- MS_VERBOSE is deprecated. */
-#define MS_SILENT 32768
-#define MS_POSIXACL (1<<16) /* VFS does not apply the umask */
-#define MS_UNBINDABLE (1<<17) /* change to unbindable */
-#define MS_PRIVATE (1<<18) /* change to private */
-#define MS_SLAVE (1<<19) /* change to slave */
-#define MS_SHARED (1<<20) /* change to shared */
-#define MS_RELATIME (1<<21) /* Update atime relative to mtime/ctime. */
-#define MS_KERNMOUNT (1<<22) /* this is a kern_mount call */
-#define MS_I_VERSION (1<<23) /* Update inode I_version field */
-#define MS_STRICTATIME (1<<24) /* Always perform atime updates */
-#define MS_NOSEC (1<<28)
-#define MS_BORN (1<<29)
-#define MS_ACTIVE (1<<30)
-#define MS_NOUSER (1<<31)
-
-/*
- * Superblock flags that can be altered by MS_REMOUNT
- */
-#define MS_RMT_MASK (MS_RDONLY|MS_SYNCHRONOUS|MS_MANDLOCK|MS_I_VERSION)
-
-/*
- * Old magic mount flag and mask
- */
-#define MS_MGC_VAL 0xC0ED0000
-#define MS_MGC_MSK 0xffff0000
-
-/* Inode flags - they have nothing to superblock flags now */
-
-#define S_SYNC 1 /* Writes are synced at once */
-#define S_NOATIME 2 /* Do not update access times */
-#define S_APPEND 4 /* Append-only file */
-#define S_IMMUTABLE 8 /* Immutable file */
-#define S_DEAD 16 /* removed, but still open directory */
-#define S_NOQUOTA 32 /* Inode is not counted to quota */
-#define S_DIRSYNC 64 /* Directory modifications are synchronous */
-#define S_NOCMTIME 128 /* Do not update file c/mtime */
-#define S_SWAPFILE 256 /* Do not truncate: swapon got its bmaps */
-#define S_PRIVATE 512 /* Inode is fs-internal */
-#define S_IMA 1024 /* Inode has an associated IMA struct */
-#define S_AUTOMOUNT 2048 /* Automount/referral quasi-directory */
-#define S_NOSEC 4096 /* no suid or xattr security attributes */
-
-/*
- * Note that nosuid etc flags are inode-specific: setting some file-system
- * flags just means all the inodes inherit those flags by default. It might be
- * possible to override it selectively if you really wanted to with some
- * ioctl() that is not currently implemented.
- *
- * Exception: MS_RDONLY is always applied to the entire file system.
- *
- * Unfortunately, it is possible to change a filesystems flags with it mounted
- * with files in use. This means that all of the inodes will not have their
- * i_flags updated. Hence, i_flags no longer inherit the superblock mount
- * flags, so these have to be checked separately. -- rmk@arm.uk.linux.org
- */
-#define __IS_FLG(inode,flg) ((inode)->i_sb->s_flags & (flg))
-
-#define IS_RDONLY(inode) ((inode)->i_sb->s_flags & MS_RDONLY)
-#define IS_SYNC(inode) (__IS_FLG(inode, MS_SYNCHRONOUS) || \
- ((inode)->i_flags & S_SYNC))
-#define IS_DIRSYNC(inode) (__IS_FLG(inode, MS_SYNCHRONOUS|MS_DIRSYNC) || \
- ((inode)->i_flags & (S_SYNC|S_DIRSYNC)))
-#define IS_MANDLOCK(inode) __IS_FLG(inode, MS_MANDLOCK)
-#define IS_NOATIME(inode) __IS_FLG(inode, MS_RDONLY|MS_NOATIME)
-#define IS_I_VERSION(inode) __IS_FLG(inode, MS_I_VERSION)
-
-#define IS_NOQUOTA(inode) ((inode)->i_flags & S_NOQUOTA)
-#define IS_APPEND(inode) ((inode)->i_flags & S_APPEND)
-#define IS_IMMUTABLE(inode) ((inode)->i_flags & S_IMMUTABLE)
-#define IS_POSIXACL(inode) __IS_FLG(inode, MS_POSIXACL)
-
-#define IS_DEADDIR(inode) ((inode)->i_flags & S_DEAD)
-#define IS_NOCMTIME(inode) ((inode)->i_flags & S_NOCMTIME)
-#define IS_SWAPFILE(inode) ((inode)->i_flags & S_SWAPFILE)
-#define IS_PRIVATE(inode) ((inode)->i_flags & S_PRIVATE)
-#define IS_IMA(inode) ((inode)->i_flags & S_IMA)
-#define IS_AUTOMOUNT(inode) ((inode)->i_flags & S_AUTOMOUNT)
-#define IS_NOSEC(inode) ((inode)->i_flags & S_NOSEC)
-
-/* the read-only stuff doesn't really belong here, but any other place is
- probably as bad and I don't want to create yet another include file. */
-
-#define BLKROSET _IO(0x12,93) /* set device read-only (0 = read-write) */
-#define BLKROGET _IO(0x12,94) /* get read-only status (0 = read_write) */
-#define BLKRRPART _IO(0x12,95) /* re-read partition table */
-#define BLKGETSIZE _IO(0x12,96) /* return device size /512 (long *arg) */
-#define BLKFLSBUF _IO(0x12,97) /* flush buffer cache */
-#define BLKRASET _IO(0x12,98) /* set read ahead for block device */
-#define BLKRAGET _IO(0x12,99) /* get current read ahead setting */
-#define BLKFRASET _IO(0x12,100)/* set filesystem (mm/filemap.c) read-ahead */
-#define BLKFRAGET _IO(0x12,101)/* get filesystem (mm/filemap.c) read-ahead */
-#define BLKSECTSET _IO(0x12,102)/* set max sectors per request (ll_rw_blk.c) */
-#define BLKSECTGET _IO(0x12,103)/* get max sectors per request (ll_rw_blk.c) */
-#define BLKSSZGET _IO(0x12,104)/* get block device sector size */
-#if 0
-#define BLKPG _IO(0x12,105)/* See blkpg.h */
-
-/* Some people are morons. Do not use sizeof! */
-
-#define BLKELVGET _IOR(0x12,106,size_t)/* elevator get */
-#define BLKELVSET _IOW(0x12,107,size_t)/* elevator set */
-/* This was here just to show that the number is taken -
- probably all these _IO(0x12,*) ioctls should be moved to blkpg.h. */
-#endif
-/* A jump here: 108-111 have been used for various private purposes. */
-#define BLKBSZGET _IOR(0x12,112,size_t)
-#define BLKBSZSET _IOW(0x12,113,size_t)
-#define BLKGETSIZE64 _IOR(0x12,114,size_t) /* return device size in bytes (u64 *arg) */
-#define BLKTRACESETUP _IOWR(0x12,115,struct blk_user_trace_setup)
-#define BLKTRACESTART _IO(0x12,116)
-#define BLKTRACESTOP _IO(0x12,117)
-#define BLKTRACETEARDOWN _IO(0x12,118)
-#define BLKDISCARD _IO(0x12,119)
-#define BLKIOMIN _IO(0x12,120)
-#define BLKIOOPT _IO(0x12,121)
-#define BLKALIGNOFF _IO(0x12,122)
-#define BLKPBSZGET _IO(0x12,123)
-#define BLKDISCARDZEROES _IO(0x12,124)
-#define BLKSECDISCARD _IO(0x12,125)
-#define BLKROTATIONAL _IO(0x12,126)
-#define BLKZEROOUT _IO(0x12,127)
-
-#define BMAP_IOCTL 1 /* obsolete - kept for compatibility */
-#define FIBMAP _IO(0x00,1) /* bmap access */
-#define FIGETBSZ _IO(0x00,2) /* get the block size used for bmap */
-#define FIFREEZE _IOWR('X', 119, int) /* Freeze */
-#define FITHAW _IOWR('X', 120, int) /* Thaw */
-#define FITRIM _IOWR('X', 121, struct fstrim_range) /* Trim */
-
-#define FS_IOC_GETFLAGS _IOR('f', 1, long)
-#define FS_IOC_SETFLAGS _IOW('f', 2, long)
-#define FS_IOC_GETVERSION _IOR('v', 1, long)
-#define FS_IOC_SETVERSION _IOW('v', 2, long)
-#define FS_IOC_FIEMAP _IOWR('f', 11, struct fiemap)
-#define FS_IOC32_GETFLAGS _IOR('f', 1, int)
-#define FS_IOC32_SETFLAGS _IOW('f', 2, int)
-#define FS_IOC32_GETVERSION _IOR('v', 1, int)
-#define FS_IOC32_SETVERSION _IOW('v', 2, int)
-
-/*
- * Inode flags (FS_IOC_GETFLAGS / FS_IOC_SETFLAGS)
- */
-#define FS_SECRM_FL 0x00000001 /* Secure deletion */
-#define FS_UNRM_FL 0x00000002 /* Undelete */
-#define FS_COMPR_FL 0x00000004 /* Compress file */
-#define FS_SYNC_FL 0x00000008 /* Synchronous updates */
-#define FS_IMMUTABLE_FL 0x00000010 /* Immutable file */
-#define FS_APPEND_FL 0x00000020 /* writes to file may only append */
-#define FS_NODUMP_FL 0x00000040 /* do not dump file */
-#define FS_NOATIME_FL 0x00000080 /* do not update atime */
-/* Reserved for compression usage... */
-#define FS_DIRTY_FL 0x00000100
-#define FS_COMPRBLK_FL 0x00000200 /* One or more compressed clusters */
-#define FS_NOCOMP_FL 0x00000400 /* Don't compress */
-#define FS_ECOMPR_FL 0x00000800 /* Compression error */
-/* End compression flags --- maybe not all used */
-#define FS_BTREE_FL 0x00001000 /* btree format dir */
-#define FS_INDEX_FL 0x00001000 /* hash-indexed directory */
-#define FS_IMAGIC_FL 0x00002000 /* AFS directory */
-#define FS_JOURNAL_DATA_FL 0x00004000 /* Reserved for ext3 */
-#define FS_NOTAIL_FL 0x00008000 /* file tail should not be merged */
-#define FS_DIRSYNC_FL 0x00010000 /* dirsync behaviour (directories only) */
-#define FS_TOPDIR_FL 0x00020000 /* Top of directory hierarchies*/
-#define FS_EXTENT_FL 0x00080000 /* Extents */
-#define FS_DIRECTIO_FL 0x00100000 /* Use direct i/o */
-#define FS_NOCOW_FL 0x00800000 /* Do not cow file */
-#define FS_RESERVED_FL 0x80000000 /* reserved for ext2 lib */
-
-#define FS_FL_USER_VISIBLE 0x0003DFFF /* User visible flags */
-#define FS_FL_USER_MODIFIABLE 0x000380FF /* User modifiable flags */
-
-
-#define SYNC_FILE_RANGE_WAIT_BEFORE 1
-#define SYNC_FILE_RANGE_WRITE 2
-#define SYNC_FILE_RANGE_WAIT_AFTER 4
-
-#ifdef __KERNEL__
-
-#include <linux/linkage.h>
-#include <linux/wait.h>
-#include <linux/kdev_t.h>
-#include <linux/dcache.h>
-#include <linux/path.h>
-#include <linux/stat.h>
-#include <linux/cache.h>
-#include <linux/list.h>
-#include <linux/radix-tree.h>
-#include <linux/rbtree.h>
-#include <linux/init.h>
-#include <linux/pid.h>
-#include <linux/bug.h>
-#include <linux/mutex.h>
-#include <linux/capability.h>
-#include <linux/semaphore.h>
-#include <linux/fiemap.h>
-#include <linux/rculist_bl.h>
-#include <linux/atomic.h>
-#include <linux/shrinker.h>
-#include <linux/migrate_mode.h>
-#include <linux/uidgid.h>
-#include <linux/lockdep.h>
-#include <linux/percpu-rwsem.h>
-
-#include <asm/byteorder.h>
-
-struct export_operations;
-struct hd_geometry;
-struct iovec;
-struct nameidata;
-struct kiocb;
-struct kobject;
-struct pipe_inode_info;
-struct poll_table_struct;
-struct kstatfs;
-struct vm_area_struct;
-struct vfsmount;
-struct cred;
-struct swap_info_struct;
-
-extern void __init inode_init(void);
-extern void __init inode_init_early(void);
-extern void __init files_init(unsigned long);
-
-extern struct files_stat_struct files_stat;
-extern unsigned long get_max_files(void);
-extern int sysctl_nr_open;
-extern struct inodes_stat_t inodes_stat;
-extern int leases_enable, lease_break_time;
-extern int sysctl_protected_symlinks;
-extern int sysctl_protected_hardlinks;
-
-struct buffer_head;
-typedef int (get_block_t)(struct inode *inode, sector_t iblock,
- struct buffer_head *bh_result, int create);
-typedef void (dio_iodone_t)(struct kiocb *iocb, loff_t offset,
- ssize_t bytes, void *private, int ret,
- bool is_async);
-
/*
* Attribute flags. These should be or-ed together to figure out what
* has been changed!
@@ -2877,5 +2546,4 @@
inode->i_flags |= S_NOSEC;
}
-#endif /* __KERNEL__ */
#endif /* _LINUX_FS_H */
diff --git a/include/linux/fsl_hypervisor.h b/include/linux/fsl_hypervisor.h
index 1cebaee..2a707d7 100644
--- a/include/linux/fsl_hypervisor.h
+++ b/include/linux/fsl_hypervisor.h
@@ -36,187 +36,11 @@
* also be included by applications that need to communicate with the driver
* via the ioctl interface.
*/
-
#ifndef FSL_HYPERVISOR_H
#define FSL_HYPERVISOR_H
-#include <linux/types.h>
+#include <uapi/linux/fsl_hypervisor.h>
-/**
- * struct fsl_hv_ioctl_restart - restart a partition
- * @ret: return error code from the hypervisor
- * @partition: the ID of the partition to restart, or -1 for the
- * calling partition
- *
- * Used by FSL_HV_IOCTL_PARTITION_RESTART
- */
-struct fsl_hv_ioctl_restart {
- __u32 ret;
- __u32 partition;
-};
-
-/**
- * struct fsl_hv_ioctl_status - get a partition's status
- * @ret: return error code from the hypervisor
- * @partition: the ID of the partition to query, or -1 for the
- * calling partition
- * @status: The returned status of the partition
- *
- * Used by FSL_HV_IOCTL_PARTITION_GET_STATUS
- *
- * Values of 'status':
- * 0 = Stopped
- * 1 = Running
- * 2 = Starting
- * 3 = Stopping
- */
-struct fsl_hv_ioctl_status {
- __u32 ret;
- __u32 partition;
- __u32 status;
-};
-
-/**
- * struct fsl_hv_ioctl_start - start a partition
- * @ret: return error code from the hypervisor
- * @partition: the ID of the partition to control
- * @entry_point: The offset within the guest IMA to start execution
- * @load: If non-zero, reload the partition's images before starting
- *
- * Used by FSL_HV_IOCTL_PARTITION_START
- */
-struct fsl_hv_ioctl_start {
- __u32 ret;
- __u32 partition;
- __u32 entry_point;
- __u32 load;
-};
-
-/**
- * struct fsl_hv_ioctl_stop - stop a partition
- * @ret: return error code from the hypervisor
- * @partition: the ID of the partition to stop, or -1 for the calling
- * partition
- *
- * Used by FSL_HV_IOCTL_PARTITION_STOP
- */
-struct fsl_hv_ioctl_stop {
- __u32 ret;
- __u32 partition;
-};
-
-/**
- * struct fsl_hv_ioctl_memcpy - copy memory between partitions
- * @ret: return error code from the hypervisor
- * @source: the partition ID of the source partition, or -1 for this
- * partition
- * @target: the partition ID of the target partition, or -1 for this
- * partition
- * @reserved: reserved, must be set to 0
- * @local_addr: user-space virtual address of a buffer in the local
- * partition
- * @remote_addr: guest physical address of a buffer in the
- * remote partition
- * @count: the number of bytes to copy. Both the local and remote
- * buffers must be at least 'count' bytes long
- *
- * Used by FSL_HV_IOCTL_MEMCPY
- *
- * The 'local' partition is the partition that calls this ioctl. The
- * 'remote' partition is a different partition. The data is copied from
- * the 'source' paritition' to the 'target' partition.
- *
- * The buffer in the remote partition must be guest physically
- * contiguous.
- *
- * This ioctl does not support copying memory between two remote
- * partitions or within the same partition, so either 'source' or
- * 'target' (but not both) must be -1. In other words, either
- *
- * source == local and target == remote
- * or
- * source == remote and target == local
- */
-struct fsl_hv_ioctl_memcpy {
- __u32 ret;
- __u32 source;
- __u32 target;
- __u32 reserved; /* padding to ensure local_vaddr is aligned */
- __u64 local_vaddr;
- __u64 remote_paddr;
- __u64 count;
-};
-
-/**
- * struct fsl_hv_ioctl_doorbell - ring a doorbell
- * @ret: return error code from the hypervisor
- * @doorbell: the handle of the doorbell to ring doorbell
- *
- * Used by FSL_HV_IOCTL_DOORBELL
- */
-struct fsl_hv_ioctl_doorbell {
- __u32 ret;
- __u32 doorbell;
-};
-
-/**
- * struct fsl_hv_ioctl_prop - get/set a device tree property
- * @ret: return error code from the hypervisor
- * @handle: handle of partition whose tree to access
- * @path: virtual address of path name of node to access
- * @propname: virtual address of name of property to access
- * @propval: virtual address of property data buffer
- * @proplen: Size of property data buffer
- * @reserved: reserved, must be set to 0
- *
- * Used by FSL_HV_IOCTL_DOORBELL
- */
-struct fsl_hv_ioctl_prop {
- __u32 ret;
- __u32 handle;
- __u64 path;
- __u64 propname;
- __u64 propval;
- __u32 proplen;
- __u32 reserved; /* padding to ensure structure is aligned */
-};
-
-/* The ioctl type, documented in ioctl-number.txt */
-#define FSL_HV_IOCTL_TYPE 0xAF
-
-/* Restart another partition */
-#define FSL_HV_IOCTL_PARTITION_RESTART \
- _IOWR(FSL_HV_IOCTL_TYPE, 1, struct fsl_hv_ioctl_restart)
-
-/* Get a partition's status */
-#define FSL_HV_IOCTL_PARTITION_GET_STATUS \
- _IOWR(FSL_HV_IOCTL_TYPE, 2, struct fsl_hv_ioctl_status)
-
-/* Boot another partition */
-#define FSL_HV_IOCTL_PARTITION_START \
- _IOWR(FSL_HV_IOCTL_TYPE, 3, struct fsl_hv_ioctl_start)
-
-/* Stop this or another partition */
-#define FSL_HV_IOCTL_PARTITION_STOP \
- _IOWR(FSL_HV_IOCTL_TYPE, 4, struct fsl_hv_ioctl_stop)
-
-/* Copy data from one partition to another */
-#define FSL_HV_IOCTL_MEMCPY \
- _IOWR(FSL_HV_IOCTL_TYPE, 5, struct fsl_hv_ioctl_memcpy)
-
-/* Ring a doorbell */
-#define FSL_HV_IOCTL_DOORBELL \
- _IOWR(FSL_HV_IOCTL_TYPE, 6, struct fsl_hv_ioctl_doorbell)
-
-/* Get a property from another guest's device tree */
-#define FSL_HV_IOCTL_GETPROP \
- _IOWR(FSL_HV_IOCTL_TYPE, 7, struct fsl_hv_ioctl_prop)
-
-/* Set a property in another guest's device tree */
-#define FSL_HV_IOCTL_SETPROP \
- _IOWR(FSL_HV_IOCTL_TYPE, 8, struct fsl_hv_ioctl_prop)
-
-#ifdef __KERNEL__
/**
* fsl_hv_event_register() - register a callback for failover events
@@ -237,5 +61,3 @@
int fsl_hv_failover_unregister(struct notifier_block *nb);
#endif
-
-#endif
diff --git a/include/linux/futex.h b/include/linux/futex.h
index 1e5a26d..b0d95ca 100644
--- a/include/linux/futex.h
+++ b/include/linux/futex.h
@@ -1,129 +1,8 @@
#ifndef _LINUX_FUTEX_H
#define _LINUX_FUTEX_H
-#include <linux/compiler.h>
-#include <linux/types.h>
+#include <uapi/linux/futex.h>
-/* Second argument to futex syscall */
-
-
-#define FUTEX_WAIT 0
-#define FUTEX_WAKE 1
-#define FUTEX_FD 2
-#define FUTEX_REQUEUE 3
-#define FUTEX_CMP_REQUEUE 4
-#define FUTEX_WAKE_OP 5
-#define FUTEX_LOCK_PI 6
-#define FUTEX_UNLOCK_PI 7
-#define FUTEX_TRYLOCK_PI 8
-#define FUTEX_WAIT_BITSET 9
-#define FUTEX_WAKE_BITSET 10
-#define FUTEX_WAIT_REQUEUE_PI 11
-#define FUTEX_CMP_REQUEUE_PI 12
-
-#define FUTEX_PRIVATE_FLAG 128
-#define FUTEX_CLOCK_REALTIME 256
-#define FUTEX_CMD_MASK ~(FUTEX_PRIVATE_FLAG | FUTEX_CLOCK_REALTIME)
-
-#define FUTEX_WAIT_PRIVATE (FUTEX_WAIT | FUTEX_PRIVATE_FLAG)
-#define FUTEX_WAKE_PRIVATE (FUTEX_WAKE | FUTEX_PRIVATE_FLAG)
-#define FUTEX_REQUEUE_PRIVATE (FUTEX_REQUEUE | FUTEX_PRIVATE_FLAG)
-#define FUTEX_CMP_REQUEUE_PRIVATE (FUTEX_CMP_REQUEUE | FUTEX_PRIVATE_FLAG)
-#define FUTEX_WAKE_OP_PRIVATE (FUTEX_WAKE_OP | FUTEX_PRIVATE_FLAG)
-#define FUTEX_LOCK_PI_PRIVATE (FUTEX_LOCK_PI | FUTEX_PRIVATE_FLAG)
-#define FUTEX_UNLOCK_PI_PRIVATE (FUTEX_UNLOCK_PI | FUTEX_PRIVATE_FLAG)
-#define FUTEX_TRYLOCK_PI_PRIVATE (FUTEX_TRYLOCK_PI | FUTEX_PRIVATE_FLAG)
-#define FUTEX_WAIT_BITSET_PRIVATE (FUTEX_WAIT_BITSET | FUTEX_PRIVATE_FLAG)
-#define FUTEX_WAKE_BITSET_PRIVATE (FUTEX_WAKE_BITSET | FUTEX_PRIVATE_FLAG)
-#define FUTEX_WAIT_REQUEUE_PI_PRIVATE (FUTEX_WAIT_REQUEUE_PI | \
- FUTEX_PRIVATE_FLAG)
-#define FUTEX_CMP_REQUEUE_PI_PRIVATE (FUTEX_CMP_REQUEUE_PI | \
- FUTEX_PRIVATE_FLAG)
-
-/*
- * Support for robust futexes: the kernel cleans up held futexes at
- * thread exit time.
- */
-
-/*
- * Per-lock list entry - embedded in user-space locks, somewhere close
- * to the futex field. (Note: user-space uses a double-linked list to
- * achieve O(1) list add and remove, but the kernel only needs to know
- * about the forward link)
- *
- * NOTE: this structure is part of the syscall ABI, and must not be
- * changed.
- */
-struct robust_list {
- struct robust_list __user *next;
-};
-
-/*
- * Per-thread list head:
- *
- * NOTE: this structure is part of the syscall ABI, and must only be
- * changed if the change is first communicated with the glibc folks.
- * (When an incompatible change is done, we'll increase the structure
- * size, which glibc will detect)
- */
-struct robust_list_head {
- /*
- * The head of the list. Points back to itself if empty:
- */
- struct robust_list list;
-
- /*
- * This relative offset is set by user-space, it gives the kernel
- * the relative position of the futex field to examine. This way
- * we keep userspace flexible, to freely shape its data-structure,
- * without hardcoding any particular offset into the kernel:
- */
- long futex_offset;
-
- /*
- * The death of the thread may race with userspace setting
- * up a lock's links. So to handle this race, userspace first
- * sets this field to the address of the to-be-taken lock,
- * then does the lock acquire, and then adds itself to the
- * list, and then clears this field. Hence the kernel will
- * always have full knowledge of all locks that the thread
- * _might_ have taken. We check the owner TID in any case,
- * so only truly owned locks will be handled.
- */
- struct robust_list __user *list_op_pending;
-};
-
-/*
- * Are there any waiters for this robust futex:
- */
-#define FUTEX_WAITERS 0x80000000
-
-/*
- * The kernel signals via this bit that a thread holding a futex
- * has exited without unlocking the futex. The kernel also does
- * a FUTEX_WAKE on such futexes, after setting the bit, to wake
- * up any possible waiters:
- */
-#define FUTEX_OWNER_DIED 0x40000000
-
-/*
- * The rest of the robust-futex field is for the TID:
- */
-#define FUTEX_TID_MASK 0x3fffffff
-
-/*
- * This limit protects against a deliberately circular list.
- * (Not worth introducing an rlimit for it)
- */
-#define ROBUST_LIST_LIMIT 2048
-
-/*
- * bitset with all bits set for the FUTEX_xxx_BITSET OPs to request a
- * match of any bit.
- */
-#define FUTEX_BITSET_MATCH_ANY 0xffffffff
-
-#ifdef __KERNEL__
struct inode;
struct mm_struct;
struct task_struct;
@@ -185,31 +64,4 @@
{
}
#endif
-#endif /* __KERNEL__ */
-
-#define FUTEX_OP_SET 0 /* *(int *)UADDR2 = OPARG; */
-#define FUTEX_OP_ADD 1 /* *(int *)UADDR2 += OPARG; */
-#define FUTEX_OP_OR 2 /* *(int *)UADDR2 |= OPARG; */
-#define FUTEX_OP_ANDN 3 /* *(int *)UADDR2 &= ~OPARG; */
-#define FUTEX_OP_XOR 4 /* *(int *)UADDR2 ^= OPARG; */
-
-#define FUTEX_OP_OPARG_SHIFT 8 /* Use (1 << OPARG) instead of OPARG. */
-
-#define FUTEX_OP_CMP_EQ 0 /* if (oldval == CMPARG) wake */
-#define FUTEX_OP_CMP_NE 1 /* if (oldval != CMPARG) wake */
-#define FUTEX_OP_CMP_LT 2 /* if (oldval < CMPARG) wake */
-#define FUTEX_OP_CMP_LE 3 /* if (oldval <= CMPARG) wake */
-#define FUTEX_OP_CMP_GT 4 /* if (oldval > CMPARG) wake */
-#define FUTEX_OP_CMP_GE 5 /* if (oldval >= CMPARG) wake */
-
-/* FUTEX_WAKE_OP will perform atomically
- int oldval = *(int *)UADDR2;
- *(int *)UADDR2 = oldval OP OPARG;
- if (oldval CMP CMPARG)
- wake UADDR2; */
-
-#define FUTEX_OP(op, oparg, cmp, cmparg) \
- (((op & 0xf) << 28) | ((cmp & 0xf) << 24) \
- | ((oparg & 0xfff) << 12) | (cmparg & 0xfff))
-
#endif
diff --git a/include/linux/gameport.h b/include/linux/gameport.h
index b986be5..bb7de09 100644
--- a/include/linux/gameport.h
+++ b/include/linux/gameport.h
@@ -1,6 +1,3 @@
-#ifndef _GAMEPORT_H
-#define _GAMEPORT_H
-
/*
* Copyright (c) 1999-2002 Vojtech Pavlik
*
@@ -8,8 +5,9 @@
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*/
+#ifndef _GAMEPORT_H
+#define _GAMEPORT_H
-#ifdef __KERNEL__
#include <asm/io.h>
#include <linux/types.h>
#include <linux/list.h>
@@ -17,6 +15,7 @@
#include <linux/device.h>
#include <linux/timer.h>
#include <linux/slab.h>
+#include <uapi/linux/gameport.h>
struct gameport {
@@ -166,24 +165,6 @@
module_driver(__gameport_driver, gameport_register_driver, \
gameport_unregister_driver)
-#endif /* __KERNEL__ */
-
-#define GAMEPORT_MODE_DISABLED 0
-#define GAMEPORT_MODE_RAW 1
-#define GAMEPORT_MODE_COOKED 2
-
-#define GAMEPORT_ID_VENDOR_ANALOG 0x0001
-#define GAMEPORT_ID_VENDOR_MADCATZ 0x0002
-#define GAMEPORT_ID_VENDOR_LOGITECH 0x0003
-#define GAMEPORT_ID_VENDOR_CREATIVE 0x0004
-#define GAMEPORT_ID_VENDOR_GENIUS 0x0005
-#define GAMEPORT_ID_VENDOR_INTERACT 0x0006
-#define GAMEPORT_ID_VENDOR_MICROSOFT 0x0007
-#define GAMEPORT_ID_VENDOR_THRUSTMASTER 0x0008
-#define GAMEPORT_ID_VENDOR_GRAVIS 0x0009
-#define GAMEPORT_ID_VENDOR_GUILLEMOT 0x000a
-
-#ifdef __KERNEL__
static inline void gameport_trigger(struct gameport *gameport)
{
@@ -235,5 +216,4 @@
void gameport_start_polling(struct gameport *gameport);
void gameport_stop_polling(struct gameport *gameport);
-#endif /* __KERNEL__ */
#endif
diff --git a/include/linux/genetlink.h b/include/linux/genetlink.h
index 5ab61c1..55b6857 100644
--- a/include/linux/genetlink.h
+++ b/include/linux/genetlink.h
@@ -1,86 +1,8 @@
#ifndef __LINUX_GENERIC_NETLINK_H
#define __LINUX_GENERIC_NETLINK_H
-#include <linux/types.h>
-#include <linux/netlink.h>
+#include <uapi/linux/genetlink.h>
-#define GENL_NAMSIZ 16 /* length of family name */
-
-#define GENL_MIN_ID NLMSG_MIN_TYPE
-#define GENL_MAX_ID 1023
-
-struct genlmsghdr {
- __u8 cmd;
- __u8 version;
- __u16 reserved;
-};
-
-#define GENL_HDRLEN NLMSG_ALIGN(sizeof(struct genlmsghdr))
-
-#define GENL_ADMIN_PERM 0x01
-#define GENL_CMD_CAP_DO 0x02
-#define GENL_CMD_CAP_DUMP 0x04
-#define GENL_CMD_CAP_HASPOL 0x08
-
-/*
- * List of reserved static generic netlink identifiers:
- */
-#define GENL_ID_GENERATE 0
-#define GENL_ID_CTRL NLMSG_MIN_TYPE
-
-/**************************************************************************
- * Controller
- **************************************************************************/
-
-enum {
- CTRL_CMD_UNSPEC,
- CTRL_CMD_NEWFAMILY,
- CTRL_CMD_DELFAMILY,
- CTRL_CMD_GETFAMILY,
- CTRL_CMD_NEWOPS,
- CTRL_CMD_DELOPS,
- CTRL_CMD_GETOPS,
- CTRL_CMD_NEWMCAST_GRP,
- CTRL_CMD_DELMCAST_GRP,
- CTRL_CMD_GETMCAST_GRP, /* unused */
- __CTRL_CMD_MAX,
-};
-
-#define CTRL_CMD_MAX (__CTRL_CMD_MAX - 1)
-
-enum {
- CTRL_ATTR_UNSPEC,
- CTRL_ATTR_FAMILY_ID,
- CTRL_ATTR_FAMILY_NAME,
- CTRL_ATTR_VERSION,
- CTRL_ATTR_HDRSIZE,
- CTRL_ATTR_MAXATTR,
- CTRL_ATTR_OPS,
- CTRL_ATTR_MCAST_GROUPS,
- __CTRL_ATTR_MAX,
-};
-
-#define CTRL_ATTR_MAX (__CTRL_ATTR_MAX - 1)
-
-enum {
- CTRL_ATTR_OP_UNSPEC,
- CTRL_ATTR_OP_ID,
- CTRL_ATTR_OP_FLAGS,
- __CTRL_ATTR_OP_MAX,
-};
-
-#define CTRL_ATTR_OP_MAX (__CTRL_ATTR_OP_MAX - 1)
-
-enum {
- CTRL_ATTR_MCAST_GRP_UNSPEC,
- CTRL_ATTR_MCAST_GRP_NAME,
- CTRL_ATTR_MCAST_GRP_ID,
- __CTRL_ATTR_MCAST_GRP_MAX,
-};
-
-#define CTRL_ATTR_MCAST_GRP_MAX (__CTRL_ATTR_MCAST_GRP_MAX - 1)
-
-#ifdef __KERNEL__
/* All generic netlink requests are serialized by a global lock. */
extern void genl_lock(void);
@@ -113,6 +35,4 @@
#define MODULE_ALIAS_GENL_FAMILY(family)\
MODULE_ALIAS_NET_PF_PROTO_NAME(PF_NETLINK, NETLINK_GENERIC, "-family-" family)
-#endif /* __KERNEL__ */
-
#endif /* __LINUX_GENERIC_NETLINK_H */
diff --git a/include/linux/hdlc.h b/include/linux/hdlc.h
index ee275c8..1acb144 100644
--- a/include/linux/hdlc.h
+++ b/include/linux/hdlc.h
@@ -7,24 +7,14 @@
* under the terms of version 2 of the GNU General Public License
* as published by the Free Software Foundation.
*/
-
#ifndef __HDLC_H
#define __HDLC_H
-#define HDLC_MAX_MTU 1500 /* Ethernet 1500 bytes */
-#if 0
-#define HDLC_MAX_MRU (HDLC_MAX_MTU + 10 + 14 + 4) /* for ETH+VLAN over FR */
-#else
-#define HDLC_MAX_MRU 1600 /* as required for FR network */
-#endif
-
-
-#ifdef __KERNEL__
-
#include <linux/skbuff.h>
#include <linux/netdevice.h>
#include <linux/hdlc/ioctl.h>
+#include <uapi/linux/hdlc.h>
/* This structure is a private property of HDLC protocols.
Hardware drivers have no interest here */
@@ -127,5 +117,4 @@
return htons(ETH_P_HDLC);
}
-#endif /* __KERNEL */
#endif /* __HDLC_H */
diff --git a/include/linux/hdlcdrv.h b/include/linux/hdlcdrv.h
index c010b4a..be3be25 100644
--- a/include/linux/hdlcdrv.h
+++ b/include/linux/hdlcdrv.h
@@ -3,110 +3,14 @@
* The Linux soundcard driver for 1200 baud and 9600 baud packet radio
* (C) 1996-1998 by Thomas Sailer, HB9JNX/AE4WA
*/
-
#ifndef _HDLCDRV_H
#define _HDLCDRV_H
-/* -------------------------------------------------------------------- */
-/*
- * structs for the IOCTL commands
- */
-
-struct hdlcdrv_params {
- int iobase;
- int irq;
- int dma;
- int dma2;
- int seriobase;
- int pariobase;
- int midiiobase;
-};
-
-struct hdlcdrv_channel_params {
- int tx_delay; /* the transmitter keyup delay in 10ms units */
- int tx_tail; /* the transmitter keyoff delay in 10ms units */
- int slottime; /* the slottime in 10ms; usually 10 = 100ms */
- int ppersist; /* the p-persistence 0..255 */
- int fulldup; /* some driver do not support full duplex, setting */
- /* this just makes them send even if DCD is on */
-};
-
-struct hdlcdrv_old_channel_state {
- int ptt;
- int dcd;
- int ptt_keyed;
-};
-
-struct hdlcdrv_channel_state {
- int ptt;
- int dcd;
- int ptt_keyed;
- unsigned long tx_packets;
- unsigned long tx_errors;
- unsigned long rx_packets;
- unsigned long rx_errors;
-};
-
-struct hdlcdrv_ioctl {
- int cmd;
- union {
- struct hdlcdrv_params mp;
- struct hdlcdrv_channel_params cp;
- struct hdlcdrv_channel_state cs;
- struct hdlcdrv_old_channel_state ocs;
- unsigned int calibrate;
- unsigned char bits;
- char modename[128];
- char drivername[32];
- } data;
-};
-
-/* -------------------------------------------------------------------- */
-
-/*
- * ioctl values
- */
-#define HDLCDRVCTL_GETMODEMPAR 0
-#define HDLCDRVCTL_SETMODEMPAR 1
-#define HDLCDRVCTL_MODEMPARMASK 2 /* not handled by hdlcdrv */
-#define HDLCDRVCTL_GETCHANNELPAR 10
-#define HDLCDRVCTL_SETCHANNELPAR 11
-#define HDLCDRVCTL_OLDGETSTAT 20
-#define HDLCDRVCTL_CALIBRATE 21
-#define HDLCDRVCTL_GETSTAT 22
-
-/*
- * these are mainly for debugging purposes
- */
-#define HDLCDRVCTL_GETSAMPLES 30
-#define HDLCDRVCTL_GETBITS 31
-
-/*
- * not handled by hdlcdrv, but by its depending drivers
- */
-#define HDLCDRVCTL_GETMODE 40
-#define HDLCDRVCTL_SETMODE 41
-#define HDLCDRVCTL_MODELIST 42
-#define HDLCDRVCTL_DRIVERNAME 43
-
-/*
- * mask of needed modem parameters, returned by HDLCDRVCTL_MODEMPARMASK
- */
-#define HDLCDRV_PARMASK_IOBASE (1<<0)
-#define HDLCDRV_PARMASK_IRQ (1<<1)
-#define HDLCDRV_PARMASK_DMA (1<<2)
-#define HDLCDRV_PARMASK_DMA2 (1<<3)
-#define HDLCDRV_PARMASK_SERIOBASE (1<<4)
-#define HDLCDRV_PARMASK_PARIOBASE (1<<5)
-#define HDLCDRV_PARMASK_MIDIIOBASE (1<<6)
-
-/* -------------------------------------------------------------------- */
-
-#ifdef __KERNEL__
#include <linux/netdevice.h>
#include <linux/if.h>
#include <linux/spinlock.h>
+#include <uapi/linux/hdlcdrv.h>
#define HDLCDRV_MAGIC 0x5ac6e778
#define HDLCDRV_HDLCBUFFER 32 /* should be a power of 2 for speed reasons */
@@ -368,10 +272,4 @@
-#endif /* __KERNEL__ */
-
-/* -------------------------------------------------------------------- */
-
#endif /* _HDLCDRV_H */
-
-/* -------------------------------------------------------------------- */
diff --git a/include/linux/hid.h b/include/linux/hid.h
index 7e1f37d..c076041 100644
--- a/include/linux/hid.h
+++ b/include/linux/hid.h
@@ -1,12 +1,8 @@
-#ifndef __HID_H
-#define __HID_H
-
/*
* Copyright (c) 1999 Andreas Gal
* Copyright (c) 2000-2001 Vojtech Pavlik
* Copyright (c) 2006-2007 Jiri Kosina
*/
-
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -26,43 +22,9 @@
* e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
* Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
*/
+#ifndef __HID_H
+#define __HID_H
-/*
- * USB HID (Human Interface Device) interface class code
- */
-
-#define USB_INTERFACE_CLASS_HID 3
-
-/*
- * USB HID interface subclass and protocol codes
- */
-
-#define USB_INTERFACE_SUBCLASS_BOOT 1
-#define USB_INTERFACE_PROTOCOL_KEYBOARD 1
-#define USB_INTERFACE_PROTOCOL_MOUSE 2
-
-/*
- * HID class requests
- */
-
-#define HID_REQ_GET_REPORT 0x01
-#define HID_REQ_GET_IDLE 0x02
-#define HID_REQ_GET_PROTOCOL 0x03
-#define HID_REQ_SET_REPORT 0x09
-#define HID_REQ_SET_IDLE 0x0A
-#define HID_REQ_SET_PROTOCOL 0x0B
-
-/*
- * HID class descriptor types
- */
-
-#define HID_DT_HID (USB_TYPE_CLASS | 0x01)
-#define HID_DT_REPORT (USB_TYPE_CLASS | 0x02)
-#define HID_DT_PHYSICAL (USB_TYPE_CLASS | 0x03)
-
-#define HID_MAX_DESCRIPTOR_SIZE 4096
-
-#ifdef __KERNEL__
#include <linux/types.h>
#include <linux/slab.h>
@@ -73,6 +35,7 @@
#include <linux/input.h>
#include <linux/semaphore.h>
#include <linux/power_supply.h>
+#include <uapi/linux/hid.h>
/*
* We parse each description item into this structure. Short items data
@@ -943,7 +906,4 @@
#define hid_dbg(hid, fmt, arg...) \
dev_dbg(&(hid)->dev, fmt, ##arg)
-#endif /* __KERNEL__ */
-
#endif
-
diff --git a/include/linux/hiddev.h b/include/linux/hiddev.h
index a3f481a..a5dd814 100644
--- a/include/linux/hiddev.h
+++ b/include/linux/hiddev.h
@@ -1,12 +1,8 @@
-#ifndef _HIDDEV_H
-#define _HIDDEV_H
-
/*
* Copyright (c) 1999-2000 Vojtech Pavlik
*
* Sponsored by SuSE
*/
-
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -26,190 +22,11 @@
* e-mail - mail your message to <vojtech@suse.cz>, or by paper mail:
* Vojtech Pavlik, Ucitelska 1576, Prague 8, 182 00 Czech Republic
*/
+#ifndef _HIDDEV_H
+#define _HIDDEV_H
-#include <linux/types.h>
+#include <uapi/linux/hiddev.h>
-/*
- * The event structure itself
- */
-
-struct hiddev_event {
- unsigned hid;
- signed int value;
-};
-
-struct hiddev_devinfo {
- __u32 bustype;
- __u32 busnum;
- __u32 devnum;
- __u32 ifnum;
- __s16 vendor;
- __s16 product;
- __s16 version;
- __u32 num_applications;
-};
-
-struct hiddev_collection_info {
- __u32 index;
- __u32 type;
- __u32 usage;
- __u32 level;
-};
-
-#define HID_STRING_SIZE 256
-struct hiddev_string_descriptor {
- __s32 index;
- char value[HID_STRING_SIZE];
-};
-
-struct hiddev_report_info {
- __u32 report_type;
- __u32 report_id;
- __u32 num_fields;
-};
-
-/* To do a GUSAGE/SUSAGE, fill in at least usage_code, report_type and
- * report_id. Set report_id to REPORT_ID_UNKNOWN if the rest of the fields
- * are unknown. Otherwise use a usage_ref struct filled in from a previous
- * successful GUSAGE call to save time. To actually send a value to the
- * device, perform a SUSAGE first, followed by a SREPORT. An INITREPORT or a
- * GREPORT isn't necessary for a GUSAGE to return valid data.
- */
-#define HID_REPORT_ID_UNKNOWN 0xffffffff
-#define HID_REPORT_ID_FIRST 0x00000100
-#define HID_REPORT_ID_NEXT 0x00000200
-#define HID_REPORT_ID_MASK 0x000000ff
-#define HID_REPORT_ID_MAX 0x000000ff
-
-#define HID_REPORT_TYPE_INPUT 1
-#define HID_REPORT_TYPE_OUTPUT 2
-#define HID_REPORT_TYPE_FEATURE 3
-#define HID_REPORT_TYPE_MIN 1
-#define HID_REPORT_TYPE_MAX 3
-
-struct hiddev_field_info {
- __u32 report_type;
- __u32 report_id;
- __u32 field_index;
- __u32 maxusage;
- __u32 flags;
- __u32 physical; /* physical usage for this field */
- __u32 logical; /* logical usage for this field */
- __u32 application; /* application usage for this field */
- __s32 logical_minimum;
- __s32 logical_maximum;
- __s32 physical_minimum;
- __s32 physical_maximum;
- __u32 unit_exponent;
- __u32 unit;
-};
-
-/* Fill in report_type, report_id and field_index to get the information on a
- * field.
- */
-#define HID_FIELD_CONSTANT 0x001
-#define HID_FIELD_VARIABLE 0x002
-#define HID_FIELD_RELATIVE 0x004
-#define HID_FIELD_WRAP 0x008
-#define HID_FIELD_NONLINEAR 0x010
-#define HID_FIELD_NO_PREFERRED 0x020
-#define HID_FIELD_NULL_STATE 0x040
-#define HID_FIELD_VOLATILE 0x080
-#define HID_FIELD_BUFFERED_BYTE 0x100
-
-struct hiddev_usage_ref {
- __u32 report_type;
- __u32 report_id;
- __u32 field_index;
- __u32 usage_index;
- __u32 usage_code;
- __s32 value;
-};
-
-/* hiddev_usage_ref_multi is used for sending multiple bytes to a control.
- * It really manifests itself as setting the value of consecutive usages */
-#define HID_MAX_MULTI_USAGES 1024
-struct hiddev_usage_ref_multi {
- struct hiddev_usage_ref uref;
- __u32 num_values;
- __s32 values[HID_MAX_MULTI_USAGES];
-};
-
-/* FIELD_INDEX_NONE is returned in read() data from the kernel when flags
- * is set to (HIDDEV_FLAG_UREF | HIDDEV_FLAG_REPORT) and a new report has
- * been sent by the device
- */
-#define HID_FIELD_INDEX_NONE 0xffffffff
-
-/*
- * Protocol version.
- */
-
-#define HID_VERSION 0x010004
-
-/*
- * IOCTLs (0x00 - 0x7f)
- */
-
-#define HIDIOCGVERSION _IOR('H', 0x01, int)
-#define HIDIOCAPPLICATION _IO('H', 0x02)
-#define HIDIOCGDEVINFO _IOR('H', 0x03, struct hiddev_devinfo)
-#define HIDIOCGSTRING _IOR('H', 0x04, struct hiddev_string_descriptor)
-#define HIDIOCINITREPORT _IO('H', 0x05)
-#define HIDIOCGNAME(len) _IOC(_IOC_READ, 'H', 0x06, len)
-#define HIDIOCGREPORT _IOW('H', 0x07, struct hiddev_report_info)
-#define HIDIOCSREPORT _IOW('H', 0x08, struct hiddev_report_info)
-#define HIDIOCGREPORTINFO _IOWR('H', 0x09, struct hiddev_report_info)
-#define HIDIOCGFIELDINFO _IOWR('H', 0x0A, struct hiddev_field_info)
-#define HIDIOCGUSAGE _IOWR('H', 0x0B, struct hiddev_usage_ref)
-#define HIDIOCSUSAGE _IOW('H', 0x0C, struct hiddev_usage_ref)
-#define HIDIOCGUCODE _IOWR('H', 0x0D, struct hiddev_usage_ref)
-#define HIDIOCGFLAG _IOR('H', 0x0E, int)
-#define HIDIOCSFLAG _IOW('H', 0x0F, int)
-#define HIDIOCGCOLLECTIONINDEX _IOW('H', 0x10, struct hiddev_usage_ref)
-#define HIDIOCGCOLLECTIONINFO _IOWR('H', 0x11, struct hiddev_collection_info)
-#define HIDIOCGPHYS(len) _IOC(_IOC_READ, 'H', 0x12, len)
-
-/* For writing/reading to multiple/consecutive usages */
-#define HIDIOCGUSAGES _IOWR('H', 0x13, struct hiddev_usage_ref_multi)
-#define HIDIOCSUSAGES _IOW('H', 0x14, struct hiddev_usage_ref_multi)
-
-/*
- * Flags to be used in HIDIOCSFLAG
- */
-#define HIDDEV_FLAG_UREF 0x1
-#define HIDDEV_FLAG_REPORT 0x2
-#define HIDDEV_FLAGS 0x3
-
-/* To traverse the input report descriptor info for a HID device, perform the
- * following:
- *
- * rinfo.report_type = HID_REPORT_TYPE_INPUT;
- * rinfo.report_id = HID_REPORT_ID_FIRST;
- * ret = ioctl(fd, HIDIOCGREPORTINFO, &rinfo);
- *
- * while (ret >= 0) {
- * for (i = 0; i < rinfo.num_fields; i++) {
- * finfo.report_type = rinfo.report_type;
- * finfo.report_id = rinfo.report_id;
- * finfo.field_index = i;
- * ioctl(fd, HIDIOCGFIELDINFO, &finfo);
- * for (j = 0; j < finfo.maxusage; j++) {
- * uref.report_type = rinfo.report_type;
- * uref.report_id = rinfo.report_id;
- * uref.field_index = i;
- * uref.usage_index = j;
- * ioctl(fd, HIDIOCGUCODE, &uref);
- * ioctl(fd, HIDIOCGUSAGE, &uref);
- * }
- * }
- * rinfo.report_id |= HID_REPORT_ID_NEXT;
- * ret = ioctl(fd, HIDIOCGREPORTINFO, &rinfo);
- * }
- */
-
-
-#ifdef __KERNEL__
/*
* In-kernel definitions.
@@ -237,4 +54,3 @@
#endif
#endif
-#endif
diff --git a/include/linux/hidraw.h b/include/linux/hidraw.h
index 45e9fcb..2451662 100644
--- a/include/linux/hidraw.h
+++ b/include/linux/hidraw.h
@@ -1,10 +1,6 @@
-#ifndef _HIDRAW_H
-#define _HIDRAW_H
-
/*
* Copyright (c) 2007 Jiri Kosina
*/
-
/*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
@@ -14,39 +10,11 @@
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
*/
+#ifndef _HIDRAW_H
+#define _HIDRAW_H
-#include <linux/hid.h>
-#include <linux/types.h>
+#include <uapi/linux/hidraw.h>
-struct hidraw_report_descriptor {
- __u32 size;
- __u8 value[HID_MAX_DESCRIPTOR_SIZE];
-};
-
-struct hidraw_devinfo {
- __u32 bustype;
- __s16 vendor;
- __s16 product;
-};
-
-/* ioctl interface */
-#define HIDIOCGRDESCSIZE _IOR('H', 0x01, int)
-#define HIDIOCGRDESC _IOR('H', 0x02, struct hidraw_report_descriptor)
-#define HIDIOCGRAWINFO _IOR('H', 0x03, struct hidraw_devinfo)
-#define HIDIOCGRAWNAME(len) _IOC(_IOC_READ, 'H', 0x04, len)
-#define HIDIOCGRAWPHYS(len) _IOC(_IOC_READ, 'H', 0x05, len)
-/* The first byte of SFEATURE and GFEATURE is the report number */
-#define HIDIOCSFEATURE(len) _IOC(_IOC_WRITE|_IOC_READ, 'H', 0x06, len)
-#define HIDIOCGFEATURE(len) _IOC(_IOC_WRITE|_IOC_READ, 'H', 0x07, len)
-
-#define HIDRAW_FIRST_MINOR 0
-#define HIDRAW_MAX_DEVICES 64
-/* number of reports to buffer */
-#define HIDRAW_BUFFER_SIZE 64
-
-
-/* kernel-only API declarations */
-#ifdef __KERNEL__
struct hidraw {
unsigned int minor;
@@ -88,5 +56,3 @@
#endif
#endif
-
-#endif
diff --git a/include/linux/hpet.h b/include/linux/hpet.h
index 219ca4f..9427ab4 100644
--- a/include/linux/hpet.h
+++ b/include/linux/hpet.h
@@ -1,9 +1,8 @@
#ifndef __HPET__
#define __HPET__ 1
-#include <linux/compiler.h>
+#include <uapi/linux/hpet.h>
-#ifdef __KERNEL__
/*
* Offsets into HPET Registers
@@ -108,24 +107,4 @@
int hpet_alloc(struct hpet_data *);
-#endif /* __KERNEL__ */
-
-struct hpet_info {
- unsigned long hi_ireqfreq; /* Hz */
- unsigned long hi_flags; /* information */
- unsigned short hi_hpet;
- unsigned short hi_timer;
-};
-
-#define HPET_INFO_PERIODIC 0x0010 /* periodic-capable comparator */
-
-#define HPET_IE_ON _IO('h', 0x01) /* interrupt on */
-#define HPET_IE_OFF _IO('h', 0x02) /* interrupt off */
-#define HPET_INFO _IOR('h', 0x03, struct hpet_info)
-#define HPET_EPI _IO('h', 0x04) /* enable periodic */
-#define HPET_DPI _IO('h', 0x05) /* disable periodic */
-#define HPET_IRQFREQ _IOW('h', 0x6, unsigned long) /* IRQFREQ usec */
-
-#define MAX_HPET_TBS 8 /* maximum hpet timer blocks */
-
#endif /* !__HPET__ */
diff --git a/include/linux/i2c-dev.h b/include/linux/i2c-dev.h
index 8a7406b..7972714 100644
--- a/include/linux/i2c-dev.h
+++ b/include/linux/i2c-dev.h
@@ -19,57 +19,10 @@
Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
MA 02110-1301 USA.
*/
-
#ifndef _LINUX_I2C_DEV_H
#define _LINUX_I2C_DEV_H
-#include <linux/types.h>
-#include <linux/compiler.h>
+#include <uapi/linux/i2c-dev.h>
-/* /dev/i2c-X ioctl commands. The ioctl's parameter is always an
- * unsigned long, except for:
- * - I2C_FUNCS, takes pointer to an unsigned long
- * - I2C_RDWR, takes pointer to struct i2c_rdwr_ioctl_data
- * - I2C_SMBUS, takes pointer to struct i2c_smbus_ioctl_data
- */
-#define I2C_RETRIES 0x0701 /* number of times a device address should
- be polled when not acknowledging */
-#define I2C_TIMEOUT 0x0702 /* set timeout in units of 10 ms */
-
-/* NOTE: Slave address is 7 or 10 bits, but 10-bit addresses
- * are NOT supported! (due to code brokenness)
- */
-#define I2C_SLAVE 0x0703 /* Use this slave address */
-#define I2C_SLAVE_FORCE 0x0706 /* Use this slave address, even if it
- is already in use by a driver! */
-#define I2C_TENBIT 0x0704 /* 0 for 7 bit addrs, != 0 for 10 bit */
-
-#define I2C_FUNCS 0x0705 /* Get the adapter functionality mask */
-
-#define I2C_RDWR 0x0707 /* Combined R/W transfer (one STOP only) */
-
-#define I2C_PEC 0x0708 /* != 0 to use PEC with SMBus */
-#define I2C_SMBUS 0x0720 /* SMBus transfer */
-
-
-/* This is the structure as used in the I2C_SMBUS ioctl call */
-struct i2c_smbus_ioctl_data {
- __u8 read_write;
- __u8 command;
- __u32 size;
- union i2c_smbus_data __user *data;
-};
-
-/* This is the structure as used in the I2C_RDWR ioctl call */
-struct i2c_rdwr_ioctl_data {
- struct i2c_msg __user *msgs; /* pointers to i2c_msgs */
- __u32 nmsgs; /* number of i2c_msgs */
-};
-
-#define I2C_RDRW_IOCTL_MAX_MSGS 42
-
-#ifdef __KERNEL__
#define I2C_MAJOR 89 /* Device major number */
-#endif
-
#endif /* _LINUX_I2C_DEV_H */
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index 94aed0c..800de22 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -23,18 +23,16 @@
/* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and
Frodo Looijaard <frodol@dds.nl> */
-
#ifndef _LINUX_I2C_H
#define _LINUX_I2C_H
-#include <linux/types.h>
-#ifdef __KERNEL__
#include <linux/mod_devicetable.h>
#include <linux/device.h> /* for struct device */
#include <linux/sched.h> /* for completion */
#include <linux/mutex.h>
#include <linux/of.h> /* for struct device_node */
#include <linux/swab.h> /* for swab16 */
+#include <uapi/linux/i2c.h>
extern struct bus_type i2c_bus_type;
extern struct device_type i2c_adapter_type;
@@ -503,125 +501,4 @@
i2c_del_driver)
#endif /* I2C */
-#endif /* __KERNEL__ */
-
-/**
- * struct i2c_msg - an I2C transaction segment beginning with START
- * @addr: Slave address, either seven or ten bits. When this is a ten
- * bit address, I2C_M_TEN must be set in @flags and the adapter
- * must support I2C_FUNC_10BIT_ADDR.
- * @flags: I2C_M_RD is handled by all adapters. No other flags may be
- * provided unless the adapter exported the relevant I2C_FUNC_*
- * flags through i2c_check_functionality().
- * @len: Number of data bytes in @buf being read from or written to the
- * I2C slave address. For read transactions where I2C_M_RECV_LEN
- * is set, the caller guarantees that this buffer can hold up to
- * 32 bytes in addition to the initial length byte sent by the
- * slave (plus, if used, the SMBus PEC); and this value will be
- * incremented by the number of block data bytes received.
- * @buf: The buffer into which data is read, or from which it's written.
- *
- * An i2c_msg is the low level representation of one segment of an I2C
- * transaction. It is visible to drivers in the @i2c_transfer() procedure,
- * to userspace from i2c-dev, and to I2C adapter drivers through the
- * @i2c_adapter.@master_xfer() method.
- *
- * Except when I2C "protocol mangling" is used, all I2C adapters implement
- * the standard rules for I2C transactions. Each transaction begins with a
- * START. That is followed by the slave address, and a bit encoding read
- * versus write. Then follow all the data bytes, possibly including a byte
- * with SMBus PEC. The transfer terminates with a NAK, or when all those
- * bytes have been transferred and ACKed. If this is the last message in a
- * group, it is followed by a STOP. Otherwise it is followed by the next
- * @i2c_msg transaction segment, beginning with a (repeated) START.
- *
- * Alternatively, when the adapter supports I2C_FUNC_PROTOCOL_MANGLING then
- * passing certain @flags may have changed those standard protocol behaviors.
- * Those flags are only for use with broken/nonconforming slaves, and with
- * adapters which are known to support the specific mangling options they
- * need (one or more of IGNORE_NAK, NO_RD_ACK, NOSTART, and REV_DIR_ADDR).
- */
-struct i2c_msg {
- __u16 addr; /* slave address */
- __u16 flags;
-#define I2C_M_TEN 0x0010 /* this is a ten bit chip address */
-#define I2C_M_RD 0x0001 /* read data, from slave to master */
-#define I2C_M_STOP 0x8000 /* if I2C_FUNC_PROTOCOL_MANGLING */
-#define I2C_M_NOSTART 0x4000 /* if I2C_FUNC_NOSTART */
-#define I2C_M_REV_DIR_ADDR 0x2000 /* if I2C_FUNC_PROTOCOL_MANGLING */
-#define I2C_M_IGNORE_NAK 0x1000 /* if I2C_FUNC_PROTOCOL_MANGLING */
-#define I2C_M_NO_RD_ACK 0x0800 /* if I2C_FUNC_PROTOCOL_MANGLING */
-#define I2C_M_RECV_LEN 0x0400 /* length will be first received byte */
- __u16 len; /* msg length */
- __u8 *buf; /* pointer to msg data */
-};
-
-/* To determine what functionality is present */
-
-#define I2C_FUNC_I2C 0x00000001
-#define I2C_FUNC_10BIT_ADDR 0x00000002
-#define I2C_FUNC_PROTOCOL_MANGLING 0x00000004 /* I2C_M_IGNORE_NAK etc. */
-#define I2C_FUNC_SMBUS_PEC 0x00000008
-#define I2C_FUNC_NOSTART 0x00000010 /* I2C_M_NOSTART */
-#define I2C_FUNC_SMBUS_BLOCK_PROC_CALL 0x00008000 /* SMBus 2.0 */
-#define I2C_FUNC_SMBUS_QUICK 0x00010000
-#define I2C_FUNC_SMBUS_READ_BYTE 0x00020000
-#define I2C_FUNC_SMBUS_WRITE_BYTE 0x00040000
-#define I2C_FUNC_SMBUS_READ_BYTE_DATA 0x00080000
-#define I2C_FUNC_SMBUS_WRITE_BYTE_DATA 0x00100000
-#define I2C_FUNC_SMBUS_READ_WORD_DATA 0x00200000
-#define I2C_FUNC_SMBUS_WRITE_WORD_DATA 0x00400000
-#define I2C_FUNC_SMBUS_PROC_CALL 0x00800000
-#define I2C_FUNC_SMBUS_READ_BLOCK_DATA 0x01000000
-#define I2C_FUNC_SMBUS_WRITE_BLOCK_DATA 0x02000000
-#define I2C_FUNC_SMBUS_READ_I2C_BLOCK 0x04000000 /* I2C-like block xfer */
-#define I2C_FUNC_SMBUS_WRITE_I2C_BLOCK 0x08000000 /* w/ 1-byte reg. addr. */
-
-#define I2C_FUNC_SMBUS_BYTE (I2C_FUNC_SMBUS_READ_BYTE | \
- I2C_FUNC_SMBUS_WRITE_BYTE)
-#define I2C_FUNC_SMBUS_BYTE_DATA (I2C_FUNC_SMBUS_READ_BYTE_DATA | \
- I2C_FUNC_SMBUS_WRITE_BYTE_DATA)
-#define I2C_FUNC_SMBUS_WORD_DATA (I2C_FUNC_SMBUS_READ_WORD_DATA | \
- I2C_FUNC_SMBUS_WRITE_WORD_DATA)
-#define I2C_FUNC_SMBUS_BLOCK_DATA (I2C_FUNC_SMBUS_READ_BLOCK_DATA | \
- I2C_FUNC_SMBUS_WRITE_BLOCK_DATA)
-#define I2C_FUNC_SMBUS_I2C_BLOCK (I2C_FUNC_SMBUS_READ_I2C_BLOCK | \
- I2C_FUNC_SMBUS_WRITE_I2C_BLOCK)
-
-#define I2C_FUNC_SMBUS_EMUL (I2C_FUNC_SMBUS_QUICK | \
- I2C_FUNC_SMBUS_BYTE | \
- I2C_FUNC_SMBUS_BYTE_DATA | \
- I2C_FUNC_SMBUS_WORD_DATA | \
- I2C_FUNC_SMBUS_PROC_CALL | \
- I2C_FUNC_SMBUS_WRITE_BLOCK_DATA | \
- I2C_FUNC_SMBUS_I2C_BLOCK | \
- I2C_FUNC_SMBUS_PEC)
-
-/*
- * Data for SMBus Messages
- */
-#define I2C_SMBUS_BLOCK_MAX 32 /* As specified in SMBus standard */
-union i2c_smbus_data {
- __u8 byte;
- __u16 word;
- __u8 block[I2C_SMBUS_BLOCK_MAX + 2]; /* block[0] is used for length */
- /* and one more for user-space compatibility */
-};
-
-/* i2c_smbus_xfer read or write markers */
-#define I2C_SMBUS_READ 1
-#define I2C_SMBUS_WRITE 0
-
-/* SMBus transaction types (size parameter in the above functions)
- Note: these no longer correspond to the (arbitrary) PIIX4 internal codes! */
-#define I2C_SMBUS_QUICK 0
-#define I2C_SMBUS_BYTE 1
-#define I2C_SMBUS_BYTE_DATA 2
-#define I2C_SMBUS_WORD_DATA 3
-#define I2C_SMBUS_PROC_CALL 4
-#define I2C_SMBUS_BLOCK_DATA 5
-#define I2C_SMBUS_I2C_BLOCK_BROKEN 6
-#define I2C_SMBUS_BLOCK_PROC_CALL 7 /* SMBus 2.0 */
-#define I2C_SMBUS_I2C_BLOCK_DATA 8
-
#endif /* _LINUX_I2C_H */
diff --git a/include/linux/icmp.h b/include/linux/icmp.h
index 474f2a5..efc1849 100644
--- a/include/linux/icmp.h
+++ b/include/linux/icmp.h
@@ -17,89 +17,11 @@
#ifndef _LINUX_ICMP_H
#define _LINUX_ICMP_H
-#include <linux/types.h>
-
-#define ICMP_ECHOREPLY 0 /* Echo Reply */
-#define ICMP_DEST_UNREACH 3 /* Destination Unreachable */
-#define ICMP_SOURCE_QUENCH 4 /* Source Quench */
-#define ICMP_REDIRECT 5 /* Redirect (change route) */
-#define ICMP_ECHO 8 /* Echo Request */
-#define ICMP_TIME_EXCEEDED 11 /* Time Exceeded */
-#define ICMP_PARAMETERPROB 12 /* Parameter Problem */
-#define ICMP_TIMESTAMP 13 /* Timestamp Request */
-#define ICMP_TIMESTAMPREPLY 14 /* Timestamp Reply */
-#define ICMP_INFO_REQUEST 15 /* Information Request */
-#define ICMP_INFO_REPLY 16 /* Information Reply */
-#define ICMP_ADDRESS 17 /* Address Mask Request */
-#define ICMP_ADDRESSREPLY 18 /* Address Mask Reply */
-#define NR_ICMP_TYPES 18
-
-
-/* Codes for UNREACH. */
-#define ICMP_NET_UNREACH 0 /* Network Unreachable */
-#define ICMP_HOST_UNREACH 1 /* Host Unreachable */
-#define ICMP_PROT_UNREACH 2 /* Protocol Unreachable */
-#define ICMP_PORT_UNREACH 3 /* Port Unreachable */
-#define ICMP_FRAG_NEEDED 4 /* Fragmentation Needed/DF set */
-#define ICMP_SR_FAILED 5 /* Source Route failed */
-#define ICMP_NET_UNKNOWN 6
-#define ICMP_HOST_UNKNOWN 7
-#define ICMP_HOST_ISOLATED 8
-#define ICMP_NET_ANO 9
-#define ICMP_HOST_ANO 10
-#define ICMP_NET_UNR_TOS 11
-#define ICMP_HOST_UNR_TOS 12
-#define ICMP_PKT_FILTERED 13 /* Packet filtered */
-#define ICMP_PREC_VIOLATION 14 /* Precedence violation */
-#define ICMP_PREC_CUTOFF 15 /* Precedence cut off */
-#define NR_ICMP_UNREACH 15 /* instead of hardcoding immediate value */
-
-/* Codes for REDIRECT. */
-#define ICMP_REDIR_NET 0 /* Redirect Net */
-#define ICMP_REDIR_HOST 1 /* Redirect Host */
-#define ICMP_REDIR_NETTOS 2 /* Redirect Net for TOS */
-#define ICMP_REDIR_HOSTTOS 3 /* Redirect Host for TOS */
-
-/* Codes for TIME_EXCEEDED. */
-#define ICMP_EXC_TTL 0 /* TTL count exceeded */
-#define ICMP_EXC_FRAGTIME 1 /* Fragment Reass time exceeded */
-
-
-struct icmphdr {
- __u8 type;
- __u8 code;
- __sum16 checksum;
- union {
- struct {
- __be16 id;
- __be16 sequence;
- } echo;
- __be32 gateway;
- struct {
- __be16 __unused;
- __be16 mtu;
- } frag;
- } un;
-};
-
-#ifdef __KERNEL__
#include <linux/skbuff.h>
+#include <uapi/linux/icmp.h>
static inline struct icmphdr *icmp_hdr(const struct sk_buff *skb)
{
return (struct icmphdr *)skb_transport_header(skb);
}
-#endif
-
-/*
- * constants for (set|get)sockopt
- */
-
-#define ICMP_FILTER 1
-
-struct icmp_filter {
- __u32 data;
-};
-
-
#endif /* _LINUX_ICMP_H */
diff --git a/include/linux/icmpv6.h b/include/linux/icmpv6.h
index ba45e6b..b4f6c29 100644
--- a/include/linux/icmpv6.h
+++ b/include/linux/icmpv6.h
@@ -1,174 +1,13 @@
#ifndef _LINUX_ICMPV6_H
#define _LINUX_ICMPV6_H
-#include <linux/types.h>
-#include <asm/byteorder.h>
-
-struct icmp6hdr {
-
- __u8 icmp6_type;
- __u8 icmp6_code;
- __sum16 icmp6_cksum;
-
-
- union {
- __be32 un_data32[1];
- __be16 un_data16[2];
- __u8 un_data8[4];
-
- struct icmpv6_echo {
- __be16 identifier;
- __be16 sequence;
- } u_echo;
-
- struct icmpv6_nd_advt {
-#if defined(__LITTLE_ENDIAN_BITFIELD)
- __u32 reserved:5,
- override:1,
- solicited:1,
- router:1,
- reserved2:24;
-#elif defined(__BIG_ENDIAN_BITFIELD)
- __u32 router:1,
- solicited:1,
- override:1,
- reserved:29;
-#else
-#error "Please fix <asm/byteorder.h>"
-#endif
- } u_nd_advt;
-
- struct icmpv6_nd_ra {
- __u8 hop_limit;
-#if defined(__LITTLE_ENDIAN_BITFIELD)
- __u8 reserved:3,
- router_pref:2,
- home_agent:1,
- other:1,
- managed:1;
-
-#elif defined(__BIG_ENDIAN_BITFIELD)
- __u8 managed:1,
- other:1,
- home_agent:1,
- router_pref:2,
- reserved:3;
-#else
-#error "Please fix <asm/byteorder.h>"
-#endif
- __be16 rt_lifetime;
- } u_nd_ra;
-
- } icmp6_dataun;
-
-#define icmp6_identifier icmp6_dataun.u_echo.identifier
-#define icmp6_sequence icmp6_dataun.u_echo.sequence
-#define icmp6_pointer icmp6_dataun.un_data32[0]
-#define icmp6_mtu icmp6_dataun.un_data32[0]
-#define icmp6_unused icmp6_dataun.un_data32[0]
-#define icmp6_maxdelay icmp6_dataun.un_data16[0]
-#define icmp6_router icmp6_dataun.u_nd_advt.router
-#define icmp6_solicited icmp6_dataun.u_nd_advt.solicited
-#define icmp6_override icmp6_dataun.u_nd_advt.override
-#define icmp6_ndiscreserved icmp6_dataun.u_nd_advt.reserved
-#define icmp6_hop_limit icmp6_dataun.u_nd_ra.hop_limit
-#define icmp6_addrconf_managed icmp6_dataun.u_nd_ra.managed
-#define icmp6_addrconf_other icmp6_dataun.u_nd_ra.other
-#define icmp6_rt_lifetime icmp6_dataun.u_nd_ra.rt_lifetime
-#define icmp6_router_pref icmp6_dataun.u_nd_ra.router_pref
-};
-
-#ifdef __KERNEL__
#include <linux/skbuff.h>
+#include <uapi/linux/icmpv6.h>
static inline struct icmp6hdr *icmp6_hdr(const struct sk_buff *skb)
{
return (struct icmp6hdr *)skb_transport_header(skb);
}
-#endif
-
-#define ICMPV6_ROUTER_PREF_LOW 0x3
-#define ICMPV6_ROUTER_PREF_MEDIUM 0x0
-#define ICMPV6_ROUTER_PREF_HIGH 0x1
-#define ICMPV6_ROUTER_PREF_INVALID 0x2
-
-#define ICMPV6_DEST_UNREACH 1
-#define ICMPV6_PKT_TOOBIG 2
-#define ICMPV6_TIME_EXCEED 3
-#define ICMPV6_PARAMPROB 4
-
-#define ICMPV6_INFOMSG_MASK 0x80
-
-#define ICMPV6_ECHO_REQUEST 128
-#define ICMPV6_ECHO_REPLY 129
-#define ICMPV6_MGM_QUERY 130
-#define ICMPV6_MGM_REPORT 131
-#define ICMPV6_MGM_REDUCTION 132
-
-#define ICMPV6_NI_QUERY 139
-#define ICMPV6_NI_REPLY 140
-
-#define ICMPV6_MLD2_REPORT 143
-
-#define ICMPV6_DHAAD_REQUEST 144
-#define ICMPV6_DHAAD_REPLY 145
-#define ICMPV6_MOBILE_PREFIX_SOL 146
-#define ICMPV6_MOBILE_PREFIX_ADV 147
-
-/*
- * Codes for Destination Unreachable
- */
-#define ICMPV6_NOROUTE 0
-#define ICMPV6_ADM_PROHIBITED 1
-#define ICMPV6_NOT_NEIGHBOUR 2
-#define ICMPV6_ADDR_UNREACH 3
-#define ICMPV6_PORT_UNREACH 4
-
-/*
- * Codes for Time Exceeded
- */
-#define ICMPV6_EXC_HOPLIMIT 0
-#define ICMPV6_EXC_FRAGTIME 1
-
-/*
- * Codes for Parameter Problem
- */
-#define ICMPV6_HDR_FIELD 0
-#define ICMPV6_UNK_NEXTHDR 1
-#define ICMPV6_UNK_OPTION 2
-
-/*
- * constants for (set|get)sockopt
- */
-
-#define ICMPV6_FILTER 1
-
-/*
- * ICMPV6 filter
- */
-
-#define ICMPV6_FILTER_BLOCK 1
-#define ICMPV6_FILTER_PASS 2
-#define ICMPV6_FILTER_BLOCKOTHERS 3
-#define ICMPV6_FILTER_PASSONLY 4
-
-struct icmp6_filter {
- __u32 data[8];
-};
-
-/*
- * Definitions for MLDv2
- */
-#define MLD2_MODE_IS_INCLUDE 1
-#define MLD2_MODE_IS_EXCLUDE 2
-#define MLD2_CHANGE_TO_INCLUDE 3
-#define MLD2_CHANGE_TO_EXCLUDE 4
-#define MLD2_ALLOW_NEW_SOURCES 5
-#define MLD2_BLOCK_OLD_SOURCES 6
-
-#define MLD2_ALL_MCR_INIT { { { 0xff,0x02,0,0,0,0,0,0,0,0,0,0,0,0,0,0x16 } } }
-
-#ifdef __KERNEL__
#include <linux/netdevice.h>
@@ -192,5 +31,3 @@
const struct in6_addr *daddr,
int oif);
#endif
-
-#endif
diff --git a/include/linux/if_arp.h b/include/linux/if_arp.h
index 9adcc29..89b4614 100644
--- a/include/linux/if_arp.h
+++ b/include/linux/if_arp.h
@@ -23,140 +23,8 @@
#ifndef _LINUX_IF_ARP_H
#define _LINUX_IF_ARP_H
-#include <linux/netdevice.h>
-
-/* ARP protocol HARDWARE identifiers. */
-#define ARPHRD_NETROM 0 /* from KA9Q: NET/ROM pseudo */
-#define ARPHRD_ETHER 1 /* Ethernet 10Mbps */
-#define ARPHRD_EETHER 2 /* Experimental Ethernet */
-#define ARPHRD_AX25 3 /* AX.25 Level 2 */
-#define ARPHRD_PRONET 4 /* PROnet token ring */
-#define ARPHRD_CHAOS 5 /* Chaosnet */
-#define ARPHRD_IEEE802 6 /* IEEE 802.2 Ethernet/TR/TB */
-#define ARPHRD_ARCNET 7 /* ARCnet */
-#define ARPHRD_APPLETLK 8 /* APPLEtalk */
-#define ARPHRD_DLCI 15 /* Frame Relay DLCI */
-#define ARPHRD_ATM 19 /* ATM */
-#define ARPHRD_METRICOM 23 /* Metricom STRIP (new IANA id) */
-#define ARPHRD_IEEE1394 24 /* IEEE 1394 IPv4 - RFC 2734 */
-#define ARPHRD_EUI64 27 /* EUI-64 */
-#define ARPHRD_INFINIBAND 32 /* InfiniBand */
-
-/* Dummy types for non ARP hardware */
-#define ARPHRD_SLIP 256
-#define ARPHRD_CSLIP 257
-#define ARPHRD_SLIP6 258
-#define ARPHRD_CSLIP6 259
-#define ARPHRD_RSRVD 260 /* Notional KISS type */
-#define ARPHRD_ADAPT 264
-#define ARPHRD_ROSE 270
-#define ARPHRD_X25 271 /* CCITT X.25 */
-#define ARPHRD_HWX25 272 /* Boards with X.25 in firmware */
-#define ARPHRD_CAN 280 /* Controller Area Network */
-#define ARPHRD_PPP 512
-#define ARPHRD_CISCO 513 /* Cisco HDLC */
-#define ARPHRD_HDLC ARPHRD_CISCO
-#define ARPHRD_LAPB 516 /* LAPB */
-#define ARPHRD_DDCMP 517 /* Digital's DDCMP protocol */
-#define ARPHRD_RAWHDLC 518 /* Raw HDLC */
-
-#define ARPHRD_TUNNEL 768 /* IPIP tunnel */
-#define ARPHRD_TUNNEL6 769 /* IP6IP6 tunnel */
-#define ARPHRD_FRAD 770 /* Frame Relay Access Device */
-#define ARPHRD_SKIP 771 /* SKIP vif */
-#define ARPHRD_LOOPBACK 772 /* Loopback device */
-#define ARPHRD_LOCALTLK 773 /* Localtalk device */
-#define ARPHRD_FDDI 774 /* Fiber Distributed Data Interface */
-#define ARPHRD_BIF 775 /* AP1000 BIF */
-#define ARPHRD_SIT 776 /* sit0 device - IPv6-in-IPv4 */
-#define ARPHRD_IPDDP 777 /* IP over DDP tunneller */
-#define ARPHRD_IPGRE 778 /* GRE over IP */
-#define ARPHRD_PIMREG 779 /* PIMSM register interface */
-#define ARPHRD_HIPPI 780 /* High Performance Parallel Interface */
-#define ARPHRD_ASH 781 /* Nexus 64Mbps Ash */
-#define ARPHRD_ECONET 782 /* Acorn Econet */
-#define ARPHRD_IRDA 783 /* Linux-IrDA */
-/* ARP works differently on different FC media .. so */
-#define ARPHRD_FCPP 784 /* Point to point fibrechannel */
-#define ARPHRD_FCAL 785 /* Fibrechannel arbitrated loop */
-#define ARPHRD_FCPL 786 /* Fibrechannel public loop */
-#define ARPHRD_FCFABRIC 787 /* Fibrechannel fabric */
- /* 787->799 reserved for fibrechannel media types */
-#define ARPHRD_IEEE802_TR 800 /* Magic type ident for TR */
-#define ARPHRD_IEEE80211 801 /* IEEE 802.11 */
-#define ARPHRD_IEEE80211_PRISM 802 /* IEEE 802.11 + Prism2 header */
-#define ARPHRD_IEEE80211_RADIOTAP 803 /* IEEE 802.11 + radiotap header */
-#define ARPHRD_IEEE802154 804
-#define ARPHRD_IEEE802154_MONITOR 805 /* IEEE 802.15.4 network monitor */
-
-#define ARPHRD_PHONET 820 /* PhoNet media type */
-#define ARPHRD_PHONET_PIPE 821 /* PhoNet pipe header */
-#define ARPHRD_CAIF 822 /* CAIF media type */
-#define ARPHRD_IP6GRE 823 /* GRE over IPv6 */
-
-#define ARPHRD_VOID 0xFFFF /* Void type, nothing is known */
-#define ARPHRD_NONE 0xFFFE /* zero header length */
-
-/* ARP protocol opcodes. */
-#define ARPOP_REQUEST 1 /* ARP request */
-#define ARPOP_REPLY 2 /* ARP reply */
-#define ARPOP_RREQUEST 3 /* RARP request */
-#define ARPOP_RREPLY 4 /* RARP reply */
-#define ARPOP_InREQUEST 8 /* InARP request */
-#define ARPOP_InREPLY 9 /* InARP reply */
-#define ARPOP_NAK 10 /* (ATM)ARP NAK */
-
-
-/* ARP ioctl request. */
-struct arpreq {
- struct sockaddr arp_pa; /* protocol address */
- struct sockaddr arp_ha; /* hardware address */
- int arp_flags; /* flags */
- struct sockaddr arp_netmask; /* netmask (only for proxy arps) */
- char arp_dev[16];
-};
-
-struct arpreq_old {
- struct sockaddr arp_pa; /* protocol address */
- struct sockaddr arp_ha; /* hardware address */
- int arp_flags; /* flags */
- struct sockaddr arp_netmask; /* netmask (only for proxy arps) */
-};
-
-/* ARP Flag values. */
-#define ATF_COM 0x02 /* completed entry (ha valid) */
-#define ATF_PERM 0x04 /* permanent entry */
-#define ATF_PUBL 0x08 /* publish entry */
-#define ATF_USETRAILERS 0x10 /* has requested trailers */
-#define ATF_NETMASK 0x20 /* want to use a netmask (only
- for proxy entries) */
-#define ATF_DONTPUB 0x40 /* don't answer this addresses */
-
-/*
- * This structure defines an ethernet arp header.
- */
-
-struct arphdr {
- __be16 ar_hrd; /* format of hardware address */
- __be16 ar_pro; /* format of protocol address */
- unsigned char ar_hln; /* length of hardware address */
- unsigned char ar_pln; /* length of protocol address */
- __be16 ar_op; /* ARP opcode (command) */
-
-#if 0
- /*
- * Ethernet looks like this : This bit is variable sized however...
- */
- unsigned char ar_sha[ETH_ALEN]; /* sender hardware address */
- unsigned char ar_sip[4]; /* sender IP address */
- unsigned char ar_tha[ETH_ALEN]; /* target hardware address */
- unsigned char ar_tip[4]; /* target IP address */
-#endif
-
-};
-
-#ifdef __KERNEL__
#include <linux/skbuff.h>
+#include <uapi/linux/if_arp.h>
static inline struct arphdr *arp_hdr(const struct sk_buff *skb)
{
@@ -168,6 +36,4 @@
/* ARP header, plus 2 device addresses, plus 2 IP addresses. */
return sizeof(struct arphdr) + (dev->addr_len + sizeof(u32)) * 2;
}
-#endif
-
#endif /* _LINUX_IF_ARP_H */
diff --git a/include/linux/if_bridge.h b/include/linux/if_bridge.h
index dd3f201..1085ffe 100644
--- a/include/linux/if_bridge.h
+++ b/include/linux/if_bridge.h
@@ -9,97 +9,12 @@
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
-
#ifndef _LINUX_IF_BRIDGE_H
#define _LINUX_IF_BRIDGE_H
-#include <linux/types.h>
-
-#define SYSFS_BRIDGE_ATTR "bridge"
-#define SYSFS_BRIDGE_FDB "brforward"
-#define SYSFS_BRIDGE_PORT_SUBDIR "brif"
-#define SYSFS_BRIDGE_PORT_ATTR "brport"
-#define SYSFS_BRIDGE_PORT_LINK "bridge"
-
-#define BRCTL_VERSION 1
-
-#define BRCTL_GET_VERSION 0
-#define BRCTL_GET_BRIDGES 1
-#define BRCTL_ADD_BRIDGE 2
-#define BRCTL_DEL_BRIDGE 3
-#define BRCTL_ADD_IF 4
-#define BRCTL_DEL_IF 5
-#define BRCTL_GET_BRIDGE_INFO 6
-#define BRCTL_GET_PORT_LIST 7
-#define BRCTL_SET_BRIDGE_FORWARD_DELAY 8
-#define BRCTL_SET_BRIDGE_HELLO_TIME 9
-#define BRCTL_SET_BRIDGE_MAX_AGE 10
-#define BRCTL_SET_AGEING_TIME 11
-#define BRCTL_SET_GC_INTERVAL 12
-#define BRCTL_GET_PORT_INFO 13
-#define BRCTL_SET_BRIDGE_STP_STATE 14
-#define BRCTL_SET_BRIDGE_PRIORITY 15
-#define BRCTL_SET_PORT_PRIORITY 16
-#define BRCTL_SET_PATH_COST 17
-#define BRCTL_GET_FDB_ENTRIES 18
-
-#define BR_STATE_DISABLED 0
-#define BR_STATE_LISTENING 1
-#define BR_STATE_LEARNING 2
-#define BR_STATE_FORWARDING 3
-#define BR_STATE_BLOCKING 4
-
-struct __bridge_info {
- __u64 designated_root;
- __u64 bridge_id;
- __u32 root_path_cost;
- __u32 max_age;
- __u32 hello_time;
- __u32 forward_delay;
- __u32 bridge_max_age;
- __u32 bridge_hello_time;
- __u32 bridge_forward_delay;
- __u8 topology_change;
- __u8 topology_change_detected;
- __u8 root_port;
- __u8 stp_enabled;
- __u32 ageing_time;
- __u32 gc_interval;
- __u32 hello_timer_value;
- __u32 tcn_timer_value;
- __u32 topology_change_timer_value;
- __u32 gc_timer_value;
-};
-
-struct __port_info {
- __u64 designated_root;
- __u64 designated_bridge;
- __u16 port_id;
- __u16 designated_port;
- __u32 path_cost;
- __u32 designated_cost;
- __u8 state;
- __u8 top_change_ack;
- __u8 config_pending;
- __u8 unused0;
- __u32 message_age_timer_value;
- __u32 forward_delay_timer_value;
- __u32 hold_timer_value;
-};
-
-struct __fdb_entry {
- __u8 mac_addr[6];
- __u8 port_no;
- __u8 is_local;
- __u32 ageing_timer_value;
- __u8 port_hi;
- __u8 pad0;
- __u16 unused;
-};
-
-#ifdef __KERNEL__
#include <linux/netdevice.h>
+#include <uapi/linux/if_bridge.h>
extern void brioctl_set(int (*ioctl_hook)(struct net *, unsigned int, void __user *));
@@ -107,5 +22,3 @@
extern br_should_route_hook_t __rcu *br_should_route_hook;
#endif
-
-#endif
diff --git a/include/linux/if_eql.h b/include/linux/if_eql.h
index 18a5d02..d984694 100644
--- a/include/linux/if_eql.h
+++ b/include/linux/if_eql.h
@@ -15,28 +15,13 @@
* McLean VA 22101
* Phone: 1-703-847-0040 ext 103
*/
-
#ifndef _LINUX_IF_EQL_H
#define _LINUX_IF_EQL_H
-#define EQL_DEFAULT_SLAVE_PRIORITY 28800
-#define EQL_DEFAULT_MAX_SLAVES 4
-#define EQL_DEFAULT_MTU 576
-#define EQL_DEFAULT_RESCHED_IVAL HZ
-
-#define EQL_ENSLAVE (SIOCDEVPRIVATE)
-#define EQL_EMANCIPATE (SIOCDEVPRIVATE + 1)
-
-#define EQL_GETSLAVECFG (SIOCDEVPRIVATE + 2)
-#define EQL_SETSLAVECFG (SIOCDEVPRIVATE + 3)
-
-#define EQL_GETMASTRCFG (SIOCDEVPRIVATE + 4)
-#define EQL_SETMASTRCFG (SIOCDEVPRIVATE + 5)
-
-#ifdef __KERNEL__
#include <linux/timer.h>
#include <linux/spinlock.h>
+#include <uapi/linux/if_eql.h>
typedef struct slave {
struct list_head list;
@@ -61,23 +46,4 @@
struct timer_list timer;
} equalizer_t;
-#endif /* __KERNEL__ */
-
-typedef struct master_config {
- char master_name[16];
- int max_slaves;
- int min_slaves;
-} master_config_t;
-
-typedef struct slave_config {
- char slave_name[16];
- long priority;
-} slave_config_t;
-
-typedef struct slaving_request {
- char slave_name[16];
- long priority;
-} slaving_request_t;
-
-
#endif /* _LINUX_EQL_H */
diff --git a/include/linux/if_ether.h b/include/linux/if_ether.h
index 167ce5b..12b4d55 100644
--- a/include/linux/if_ether.h
+++ b/include/linux/if_ether.h
@@ -17,122 +17,11 @@
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
-
#ifndef _LINUX_IF_ETHER_H
#define _LINUX_IF_ETHER_H
-#include <linux/types.h>
-
-/*
- * IEEE 802.3 Ethernet magic constants. The frame sizes omit the preamble
- * and FCS/CRC (frame check sequence).
- */
-
-#define ETH_ALEN 6 /* Octets in one ethernet addr */
-#define ETH_HLEN 14 /* Total octets in header. */
-#define ETH_ZLEN 60 /* Min. octets in frame sans FCS */
-#define ETH_DATA_LEN 1500 /* Max. octets in payload */
-#define ETH_FRAME_LEN 1514 /* Max. octets in frame sans FCS */
-#define ETH_FCS_LEN 4 /* Octets in the FCS */
-
-/*
- * These are the defined Ethernet Protocol ID's.
- */
-
-#define ETH_P_LOOP 0x0060 /* Ethernet Loopback packet */
-#define ETH_P_PUP 0x0200 /* Xerox PUP packet */
-#define ETH_P_PUPAT 0x0201 /* Xerox PUP Addr Trans packet */
-#define ETH_P_IP 0x0800 /* Internet Protocol packet */
-#define ETH_P_X25 0x0805 /* CCITT X.25 */
-#define ETH_P_ARP 0x0806 /* Address Resolution packet */
-#define ETH_P_BPQ 0x08FF /* G8BPQ AX.25 Ethernet Packet [ NOT AN OFFICIALLY REGISTERED ID ] */
-#define ETH_P_IEEEPUP 0x0a00 /* Xerox IEEE802.3 PUP packet */
-#define ETH_P_IEEEPUPAT 0x0a01 /* Xerox IEEE802.3 PUP Addr Trans packet */
-#define ETH_P_DEC 0x6000 /* DEC Assigned proto */
-#define ETH_P_DNA_DL 0x6001 /* DEC DNA Dump/Load */
-#define ETH_P_DNA_RC 0x6002 /* DEC DNA Remote Console */
-#define ETH_P_DNA_RT 0x6003 /* DEC DNA Routing */
-#define ETH_P_LAT 0x6004 /* DEC LAT */
-#define ETH_P_DIAG 0x6005 /* DEC Diagnostics */
-#define ETH_P_CUST 0x6006 /* DEC Customer use */
-#define ETH_P_SCA 0x6007 /* DEC Systems Comms Arch */
-#define ETH_P_TEB 0x6558 /* Trans Ether Bridging */
-#define ETH_P_RARP 0x8035 /* Reverse Addr Res packet */
-#define ETH_P_ATALK 0x809B /* Appletalk DDP */
-#define ETH_P_AARP 0x80F3 /* Appletalk AARP */
-#define ETH_P_8021Q 0x8100 /* 802.1Q VLAN Extended Header */
-#define ETH_P_IPX 0x8137 /* IPX over DIX */
-#define ETH_P_IPV6 0x86DD /* IPv6 over bluebook */
-#define ETH_P_PAUSE 0x8808 /* IEEE Pause frames. See 802.3 31B */
-#define ETH_P_SLOW 0x8809 /* Slow Protocol. See 802.3ad 43B */
-#define ETH_P_WCCP 0x883E /* Web-cache coordination protocol
- * defined in draft-wilson-wrec-wccp-v2-00.txt */
-#define ETH_P_PPP_DISC 0x8863 /* PPPoE discovery messages */
-#define ETH_P_PPP_SES 0x8864 /* PPPoE session messages */
-#define ETH_P_MPLS_UC 0x8847 /* MPLS Unicast traffic */
-#define ETH_P_MPLS_MC 0x8848 /* MPLS Multicast traffic */
-#define ETH_P_ATMMPOA 0x884c /* MultiProtocol Over ATM */
-#define ETH_P_LINK_CTL 0x886c /* HPNA, wlan link local tunnel */
-#define ETH_P_ATMFATE 0x8884 /* Frame-based ATM Transport
- * over Ethernet
- */
-#define ETH_P_PAE 0x888E /* Port Access Entity (IEEE 802.1X) */
-#define ETH_P_AOE 0x88A2 /* ATA over Ethernet */
-#define ETH_P_8021AD 0x88A8 /* 802.1ad Service VLAN */
-#define ETH_P_802_EX1 0x88B5 /* 802.1 Local Experimental 1. */
-#define ETH_P_TIPC 0x88CA /* TIPC */
-#define ETH_P_8021AH 0x88E7 /* 802.1ah Backbone Service Tag */
-#define ETH_P_1588 0x88F7 /* IEEE 1588 Timesync */
-#define ETH_P_FCOE 0x8906 /* Fibre Channel over Ethernet */
-#define ETH_P_TDLS 0x890D /* TDLS */
-#define ETH_P_FIP 0x8914 /* FCoE Initialization Protocol */
-#define ETH_P_QINQ1 0x9100 /* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */
-#define ETH_P_QINQ2 0x9200 /* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */
-#define ETH_P_QINQ3 0x9300 /* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */
-#define ETH_P_EDSA 0xDADA /* Ethertype DSA [ NOT AN OFFICIALLY REGISTERED ID ] */
-#define ETH_P_AF_IUCV 0xFBFB /* IBM af_iucv [ NOT AN OFFICIALLY REGISTERED ID ] */
-
-/*
- * Non DIX types. Won't clash for 1500 types.
- */
-
-#define ETH_P_802_3 0x0001 /* Dummy type for 802.3 frames */
-#define ETH_P_AX25 0x0002 /* Dummy protocol id for AX.25 */
-#define ETH_P_ALL 0x0003 /* Every packet (be careful!!!) */
-#define ETH_P_802_2 0x0004 /* 802.2 frames */
-#define ETH_P_SNAP 0x0005 /* Internal only */
-#define ETH_P_DDCMP 0x0006 /* DEC DDCMP: Internal only */
-#define ETH_P_WAN_PPP 0x0007 /* Dummy type for WAN PPP frames*/
-#define ETH_P_PPP_MP 0x0008 /* Dummy type for PPP MP frames */
-#define ETH_P_LOCALTALK 0x0009 /* Localtalk pseudo type */
-#define ETH_P_CAN 0x000C /* CAN: Controller Area Network */
-#define ETH_P_CANFD 0x000D /* CANFD: CAN flexible data rate*/
-#define ETH_P_PPPTALK 0x0010 /* Dummy type for Atalk over PPP*/
-#define ETH_P_TR_802_2 0x0011 /* 802.2 frames */
-#define ETH_P_MOBITEX 0x0015 /* Mobitex (kaz@cafe.net) */
-#define ETH_P_CONTROL 0x0016 /* Card specific control frames */
-#define ETH_P_IRDA 0x0017 /* Linux-IrDA */
-#define ETH_P_ECONET 0x0018 /* Acorn Econet */
-#define ETH_P_HDLC 0x0019 /* HDLC frames */
-#define ETH_P_ARCNET 0x001A /* 1A for ArcNet :-) */
-#define ETH_P_DSA 0x001B /* Distributed Switch Arch. */
-#define ETH_P_TRAILER 0x001C /* Trailer switch tagging */
-#define ETH_P_PHONET 0x00F5 /* Nokia Phonet frames */
-#define ETH_P_IEEE802154 0x00F6 /* IEEE802.15.4 frame */
-#define ETH_P_CAIF 0x00F7 /* ST-Ericsson CAIF protocol */
-
-/*
- * This is an Ethernet frame header.
- */
-
-struct ethhdr {
- unsigned char h_dest[ETH_ALEN]; /* destination eth addr */
- unsigned char h_source[ETH_ALEN]; /* source ether addr */
- __be16 h_proto; /* packet type ID field */
-} __attribute__((packed));
-
-#ifdef __KERNEL__
#include <linux/skbuff.h>
+#include <uapi/linux/if_ether.h>
static inline struct ethhdr *eth_hdr(const struct sk_buff *skb)
{
@@ -144,6 +33,4 @@
int mac_pton(const char *s, u8 *mac);
extern ssize_t sysfs_format_mac(char *buf, const unsigned char *addr, int len);
-#endif
-
#endif /* _LINUX_IF_ETHER_H */
diff --git a/include/linux/if_fddi.h b/include/linux/if_fddi.h
index e6dc11e..f5550b3 100644
--- a/include/linux/if_fddi.h
+++ b/include/linux/if_fddi.h
@@ -24,84 +24,8 @@
#ifndef _LINUX_IF_FDDI_H
#define _LINUX_IF_FDDI_H
-#include <linux/types.h>
-
-/*
- * Define max and min legal sizes. The frame sizes do not include
- * 4 byte FCS/CRC (frame check sequence).
- */
-#define FDDI_K_ALEN 6 /* Octets in one FDDI address */
-#define FDDI_K_8022_HLEN 16 /* Total octets in 802.2 header */
-#define FDDI_K_SNAP_HLEN 21 /* Total octets in 802.2 SNAP header */
-#define FDDI_K_8022_ZLEN 16 /* Min octets in 802.2 frame sans FCS */
-#define FDDI_K_SNAP_ZLEN 21 /* Min octets in 802.2 SNAP frame sans FCS */
-#define FDDI_K_8022_DLEN 4475 /* Max octets in 802.2 payload */
-#define FDDI_K_SNAP_DLEN 4470 /* Max octets in 802.2 SNAP payload */
-#define FDDI_K_LLC_ZLEN 13 /* Min octets in LLC frame sans FCS */
-#define FDDI_K_LLC_LEN 4491 /* Max octets in LLC frame sans FCS */
-
-/* Define FDDI Frame Control (FC) Byte values */
-#define FDDI_FC_K_VOID 0x00
-#define FDDI_FC_K_NON_RESTRICTED_TOKEN 0x80
-#define FDDI_FC_K_RESTRICTED_TOKEN 0xC0
-#define FDDI_FC_K_SMT_MIN 0x41
-#define FDDI_FC_K_SMT_MAX 0x4F
-#define FDDI_FC_K_MAC_MIN 0xC1
-#define FDDI_FC_K_MAC_MAX 0xCF
-#define FDDI_FC_K_ASYNC_LLC_MIN 0x50
-#define FDDI_FC_K_ASYNC_LLC_DEF 0x54
-#define FDDI_FC_K_ASYNC_LLC_MAX 0x5F
-#define FDDI_FC_K_SYNC_LLC_MIN 0xD0
-#define FDDI_FC_K_SYNC_LLC_MAX 0xD7
-#define FDDI_FC_K_IMPLEMENTOR_MIN 0x60
-#define FDDI_FC_K_IMPLEMENTOR_MAX 0x6F
-#define FDDI_FC_K_RESERVED_MIN 0x70
-#define FDDI_FC_K_RESERVED_MAX 0x7F
-
-/* Define LLC and SNAP constants */
-#define FDDI_EXTENDED_SAP 0xAA
-#define FDDI_UI_CMD 0x03
-
-/* Define 802.2 Type 1 header */
-struct fddi_8022_1_hdr {
- __u8 dsap; /* destination service access point */
- __u8 ssap; /* source service access point */
- __u8 ctrl; /* control byte #1 */
-} __attribute__((packed));
-
-/* Define 802.2 Type 2 header */
-struct fddi_8022_2_hdr {
- __u8 dsap; /* destination service access point */
- __u8 ssap; /* source service access point */
- __u8 ctrl_1; /* control byte #1 */
- __u8 ctrl_2; /* control byte #2 */
-} __attribute__((packed));
-
-/* Define 802.2 SNAP header */
-#define FDDI_K_OUI_LEN 3
-struct fddi_snap_hdr {
- __u8 dsap; /* always 0xAA */
- __u8 ssap; /* always 0xAA */
- __u8 ctrl; /* always 0x03 */
- __u8 oui[FDDI_K_OUI_LEN]; /* organizational universal id */
- __be16 ethertype; /* packet type ID field */
-} __attribute__((packed));
-
-/* Define FDDI LLC frame header */
-struct fddihdr {
- __u8 fc; /* frame control */
- __u8 daddr[FDDI_K_ALEN]; /* destination address */
- __u8 saddr[FDDI_K_ALEN]; /* source address */
- union
- {
- struct fddi_8022_1_hdr llc_8022_1;
- struct fddi_8022_2_hdr llc_8022_2;
- struct fddi_snap_hdr llc_snap;
- } hdr;
-} __attribute__((packed));
-
-#ifdef __KERNEL__
#include <linux/netdevice.h>
+#include <uapi/linux/if_fddi.h>
/* Define FDDI statistics structure */
struct fddi_statistics {
@@ -194,6 +118,4 @@
__u32 port_ler_flag[2];
__u32 port_hardware_present[2];
};
-#endif /* __KERNEL__ */
-
#endif /* _LINUX_IF_FDDI_H */
diff --git a/include/linux/if_frad.h b/include/linux/if_frad.h
index 191ee08..4316aa1 100644
--- a/include/linux/if_frad.h
+++ b/include/linux/if_frad.h
@@ -20,105 +20,11 @@
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
-
#ifndef _FRAD_H_
#define _FRAD_H_
-#include <linux/if.h>
+#include <uapi/linux/if_frad.h>
-/* Structures and constants associated with the DLCI device driver */
-
-struct dlci_add
-{
- char devname[IFNAMSIZ];
- short dlci;
-};
-
-#define DLCI_GET_CONF (SIOCDEVPRIVATE + 2)
-#define DLCI_SET_CONF (SIOCDEVPRIVATE + 3)
-
-/*
- * These are related to the Sangoma SDLA and should remain in order.
- * Code within the SDLA module is based on the specifics of this
- * structure. Change at your own peril.
- */
-struct dlci_conf {
- short flags;
- short CIR_fwd;
- short Bc_fwd;
- short Be_fwd;
- short CIR_bwd;
- short Bc_bwd;
- short Be_bwd;
-
-/* these are part of the status read */
- short Tc_fwd;
- short Tc_bwd;
- short Tf_max;
- short Tb_max;
-
-/* add any new fields here above is a mirror of sdla_dlci_conf */
-};
-
-#define DLCI_GET_SLAVE (SIOCDEVPRIVATE + 4)
-
-/* configuration flags for DLCI */
-#define DLCI_IGNORE_CIR_OUT 0x0001
-#define DLCI_ACCOUNT_CIR_IN 0x0002
-#define DLCI_BUFFER_IF 0x0008
-
-#define DLCI_VALID_FLAGS 0x000B
-
-/* defines for the actual Frame Relay hardware */
-#define FRAD_GET_CONF (SIOCDEVPRIVATE)
-#define FRAD_SET_CONF (SIOCDEVPRIVATE + 1)
-
-#define FRAD_LAST_IOCTL FRAD_SET_CONF
-
-/*
- * Based on the setup for the Sangoma SDLA. If changes are
- * necessary to this structure, a routine will need to be
- * added to that module to copy fields.
- */
-struct frad_conf
-{
- short station;
- short flags;
- short kbaud;
- short clocking;
- short mtu;
- short T391;
- short T392;
- short N391;
- short N392;
- short N393;
- short CIR_fwd;
- short Bc_fwd;
- short Be_fwd;
- short CIR_bwd;
- short Bc_bwd;
- short Be_bwd;
-
-/* Add new fields here, above is a mirror of the sdla_conf */
-
-};
-
-#define FRAD_STATION_CPE 0x0000
-#define FRAD_STATION_NODE 0x0001
-
-#define FRAD_TX_IGNORE_CIR 0x0001
-#define FRAD_RX_ACCOUNT_CIR 0x0002
-#define FRAD_DROP_ABORTED 0x0004
-#define FRAD_BUFFERIF 0x0008
-#define FRAD_STATS 0x0010
-#define FRAD_MCI 0x0100
-#define FRAD_AUTODLCI 0x8000
-#define FRAD_VALID_FLAGS 0x811F
-
-#define FRAD_CLOCK_INT 0x0001
-#define FRAD_CLOCK_EXT 0x0000
-
-#ifdef __KERNEL__
#if defined(CONFIG_DLCI) || defined(CONFIG_DLCI_MODULE)
@@ -188,6 +94,4 @@
extern void dlci_ioctl_set(int (*hook)(unsigned int, void __user *));
-#endif /* __KERNEL__ */
-
#endif
diff --git a/include/linux/if_link.h b/include/linux/if_link.h
index 3265f33..c3f817c 100644
--- a/include/linux/if_link.h
+++ b/include/linux/if_link.h
@@ -1,341 +1,8 @@
#ifndef _LINUX_IF_LINK_H
#define _LINUX_IF_LINK_H
-#include <linux/types.h>
-#include <linux/netlink.h>
+#include <uapi/linux/if_link.h>
-/* This struct should be in sync with struct rtnl_link_stats64 */
-struct rtnl_link_stats {
- __u32 rx_packets; /* total packets received */
- __u32 tx_packets; /* total packets transmitted */
- __u32 rx_bytes; /* total bytes received */
- __u32 tx_bytes; /* total bytes transmitted */
- __u32 rx_errors; /* bad packets received */
- __u32 tx_errors; /* packet transmit problems */
- __u32 rx_dropped; /* no space in linux buffers */
- __u32 tx_dropped; /* no space available in linux */
- __u32 multicast; /* multicast packets received */
- __u32 collisions;
-
- /* detailed rx_errors: */
- __u32 rx_length_errors;
- __u32 rx_over_errors; /* receiver ring buff overflow */
- __u32 rx_crc_errors; /* recved pkt with crc error */
- __u32 rx_frame_errors; /* recv'd frame alignment error */
- __u32 rx_fifo_errors; /* recv'r fifo overrun */
- __u32 rx_missed_errors; /* receiver missed packet */
-
- /* detailed tx_errors */
- __u32 tx_aborted_errors;
- __u32 tx_carrier_errors;
- __u32 tx_fifo_errors;
- __u32 tx_heartbeat_errors;
- __u32 tx_window_errors;
-
- /* for cslip etc */
- __u32 rx_compressed;
- __u32 tx_compressed;
-};
-
-/* The main device statistics structure */
-struct rtnl_link_stats64 {
- __u64 rx_packets; /* total packets received */
- __u64 tx_packets; /* total packets transmitted */
- __u64 rx_bytes; /* total bytes received */
- __u64 tx_bytes; /* total bytes transmitted */
- __u64 rx_errors; /* bad packets received */
- __u64 tx_errors; /* packet transmit problems */
- __u64 rx_dropped; /* no space in linux buffers */
- __u64 tx_dropped; /* no space available in linux */
- __u64 multicast; /* multicast packets received */
- __u64 collisions;
-
- /* detailed rx_errors: */
- __u64 rx_length_errors;
- __u64 rx_over_errors; /* receiver ring buff overflow */
- __u64 rx_crc_errors; /* recved pkt with crc error */
- __u64 rx_frame_errors; /* recv'd frame alignment error */
- __u64 rx_fifo_errors; /* recv'r fifo overrun */
- __u64 rx_missed_errors; /* receiver missed packet */
-
- /* detailed tx_errors */
- __u64 tx_aborted_errors;
- __u64 tx_carrier_errors;
- __u64 tx_fifo_errors;
- __u64 tx_heartbeat_errors;
- __u64 tx_window_errors;
-
- /* for cslip etc */
- __u64 rx_compressed;
- __u64 tx_compressed;
-};
-
-/* The struct should be in sync with struct ifmap */
-struct rtnl_link_ifmap {
- __u64 mem_start;
- __u64 mem_end;
- __u64 base_addr;
- __u16 irq;
- __u8 dma;
- __u8 port;
-};
-
-/*
- * IFLA_AF_SPEC
- * Contains nested attributes for address family specific attributes.
- * Each address family may create a attribute with the address family
- * number as type and create its own attribute structure in it.
- *
- * Example:
- * [IFLA_AF_SPEC] = {
- * [AF_INET] = {
- * [IFLA_INET_CONF] = ...,
- * },
- * [AF_INET6] = {
- * [IFLA_INET6_FLAGS] = ...,
- * [IFLA_INET6_CONF] = ...,
- * }
- * }
- */
-
-enum {
- IFLA_UNSPEC,
- IFLA_ADDRESS,
- IFLA_BROADCAST,
- IFLA_IFNAME,
- IFLA_MTU,
- IFLA_LINK,
- IFLA_QDISC,
- IFLA_STATS,
- IFLA_COST,
-#define IFLA_COST IFLA_COST
- IFLA_PRIORITY,
-#define IFLA_PRIORITY IFLA_PRIORITY
- IFLA_MASTER,
-#define IFLA_MASTER IFLA_MASTER
- IFLA_WIRELESS, /* Wireless Extension event - see wireless.h */
-#define IFLA_WIRELESS IFLA_WIRELESS
- IFLA_PROTINFO, /* Protocol specific information for a link */
-#define IFLA_PROTINFO IFLA_PROTINFO
- IFLA_TXQLEN,
-#define IFLA_TXQLEN IFLA_TXQLEN
- IFLA_MAP,
-#define IFLA_MAP IFLA_MAP
- IFLA_WEIGHT,
-#define IFLA_WEIGHT IFLA_WEIGHT
- IFLA_OPERSTATE,
- IFLA_LINKMODE,
- IFLA_LINKINFO,
-#define IFLA_LINKINFO IFLA_LINKINFO
- IFLA_NET_NS_PID,
- IFLA_IFALIAS,
- IFLA_NUM_VF, /* Number of VFs if device is SR-IOV PF */
- IFLA_VFINFO_LIST,
- IFLA_STATS64,
- IFLA_VF_PORTS,
- IFLA_PORT_SELF,
- IFLA_AF_SPEC,
- IFLA_GROUP, /* Group the device belongs to */
- IFLA_NET_NS_FD,
- IFLA_EXT_MASK, /* Extended info mask, VFs, etc */
- IFLA_PROMISCUITY, /* Promiscuity count: > 0 means acts PROMISC */
-#define IFLA_PROMISCUITY IFLA_PROMISCUITY
- IFLA_NUM_TX_QUEUES,
- IFLA_NUM_RX_QUEUES,
- __IFLA_MAX
-};
-
-
-#define IFLA_MAX (__IFLA_MAX - 1)
-
-/* backwards compatibility for userspace */
-#ifndef __KERNEL__
-#define IFLA_RTA(r) ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct ifinfomsg))))
-#define IFLA_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct ifinfomsg))
-#endif
-
-enum {
- IFLA_INET_UNSPEC,
- IFLA_INET_CONF,
- __IFLA_INET_MAX,
-};
-
-#define IFLA_INET_MAX (__IFLA_INET_MAX - 1)
-
-/* ifi_flags.
-
- IFF_* flags.
-
- The only change is:
- IFF_LOOPBACK, IFF_BROADCAST and IFF_POINTOPOINT are
- more not changeable by user. They describe link media
- characteristics and set by device driver.
-
- Comments:
- - Combination IFF_BROADCAST|IFF_POINTOPOINT is invalid
- - If neither of these three flags are set;
- the interface is NBMA.
-
- - IFF_MULTICAST does not mean anything special:
- multicasts can be used on all not-NBMA links.
- IFF_MULTICAST means that this media uses special encapsulation
- for multicast frames. Apparently, all IFF_POINTOPOINT and
- IFF_BROADCAST devices are able to use multicasts too.
- */
-
-/* IFLA_LINK.
- For usual devices it is equal ifi_index.
- If it is a "virtual interface" (f.e. tunnel), ifi_link
- can point to real physical interface (f.e. for bandwidth calculations),
- or maybe 0, what means, that real media is unknown (usual
- for IPIP tunnels, when route to endpoint is allowed to change)
- */
-
-/* Subtype attributes for IFLA_PROTINFO */
-enum {
- IFLA_INET6_UNSPEC,
- IFLA_INET6_FLAGS, /* link flags */
- IFLA_INET6_CONF, /* sysctl parameters */
- IFLA_INET6_STATS, /* statistics */
- IFLA_INET6_MCAST, /* MC things. What of them? */
- IFLA_INET6_CACHEINFO, /* time values and max reasm size */
- IFLA_INET6_ICMP6STATS, /* statistics (icmpv6) */
- __IFLA_INET6_MAX
-};
-
-#define IFLA_INET6_MAX (__IFLA_INET6_MAX - 1)
-
-struct ifla_cacheinfo {
- __u32 max_reasm_len;
- __u32 tstamp; /* ipv6InterfaceTable updated timestamp */
- __u32 reachable_time;
- __u32 retrans_time;
-};
-
-enum {
- IFLA_INFO_UNSPEC,
- IFLA_INFO_KIND,
- IFLA_INFO_DATA,
- IFLA_INFO_XSTATS,
- __IFLA_INFO_MAX,
-};
-
-#define IFLA_INFO_MAX (__IFLA_INFO_MAX - 1)
-
-/* VLAN section */
-
-enum {
- IFLA_VLAN_UNSPEC,
- IFLA_VLAN_ID,
- IFLA_VLAN_FLAGS,
- IFLA_VLAN_EGRESS_QOS,
- IFLA_VLAN_INGRESS_QOS,
- __IFLA_VLAN_MAX,
-};
-
-#define IFLA_VLAN_MAX (__IFLA_VLAN_MAX - 1)
-
-struct ifla_vlan_flags {
- __u32 flags;
- __u32 mask;
-};
-
-enum {
- IFLA_VLAN_QOS_UNSPEC,
- IFLA_VLAN_QOS_MAPPING,
- __IFLA_VLAN_QOS_MAX
-};
-
-#define IFLA_VLAN_QOS_MAX (__IFLA_VLAN_QOS_MAX - 1)
-
-struct ifla_vlan_qos_mapping {
- __u32 from;
- __u32 to;
-};
-
-/* MACVLAN section */
-enum {
- IFLA_MACVLAN_UNSPEC,
- IFLA_MACVLAN_MODE,
- IFLA_MACVLAN_FLAGS,
- __IFLA_MACVLAN_MAX,
-};
-
-#define IFLA_MACVLAN_MAX (__IFLA_MACVLAN_MAX - 1)
-
-enum macvlan_mode {
- MACVLAN_MODE_PRIVATE = 1, /* don't talk to other macvlans */
- MACVLAN_MODE_VEPA = 2, /* talk to other ports through ext bridge */
- MACVLAN_MODE_BRIDGE = 4, /* talk to bridge ports directly */
- MACVLAN_MODE_PASSTHRU = 8,/* take over the underlying device */
-};
-
-#define MACVLAN_FLAG_NOPROMISC 1
-
-/* VXLAN section */
-enum {
- IFLA_VXLAN_UNSPEC,
- IFLA_VXLAN_ID,
- IFLA_VXLAN_GROUP,
- IFLA_VXLAN_LINK,
- IFLA_VXLAN_LOCAL,
- IFLA_VXLAN_TTL,
- IFLA_VXLAN_TOS,
- IFLA_VXLAN_LEARNING,
- IFLA_VXLAN_AGEING,
- IFLA_VXLAN_LIMIT,
- IFLA_VXLAN_PORT_RANGE,
- __IFLA_VXLAN_MAX
-};
-#define IFLA_VXLAN_MAX (__IFLA_VXLAN_MAX - 1)
-
-struct ifla_vxlan_port_range {
- __be16 low;
- __be16 high;
-};
-
-/* SR-IOV virtual function management section */
-
-enum {
- IFLA_VF_INFO_UNSPEC,
- IFLA_VF_INFO,
- __IFLA_VF_INFO_MAX,
-};
-
-#define IFLA_VF_INFO_MAX (__IFLA_VF_INFO_MAX - 1)
-
-enum {
- IFLA_VF_UNSPEC,
- IFLA_VF_MAC, /* Hardware queue specific attributes */
- IFLA_VF_VLAN,
- IFLA_VF_TX_RATE, /* TX Bandwidth Allocation */
- IFLA_VF_SPOOFCHK, /* Spoof Checking on/off switch */
- __IFLA_VF_MAX,
-};
-
-#define IFLA_VF_MAX (__IFLA_VF_MAX - 1)
-
-struct ifla_vf_mac {
- __u32 vf;
- __u8 mac[32]; /* MAX_ADDR_LEN */
-};
-
-struct ifla_vf_vlan {
- __u32 vf;
- __u32 vlan; /* 0 - 4095, 0 disables VLAN filter */
- __u32 qos;
-};
-
-struct ifla_vf_tx_rate {
- __u32 vf;
- __u32 rate; /* Max TX bandwidth in Mbps, 0 disables throttling */
-};
-
-struct ifla_vf_spoofchk {
- __u32 vf;
- __u32 setting;
-};
-#ifdef __KERNEL__
/* We don't want this structure exposed to user space */
struct ifla_vf_info {
@@ -346,96 +13,4 @@
__u32 tx_rate;
__u32 spoofchk;
};
-#endif
-
-/* VF ports management section
- *
- * Nested layout of set/get msg is:
- *
- * [IFLA_NUM_VF]
- * [IFLA_VF_PORTS]
- * [IFLA_VF_PORT]
- * [IFLA_PORT_*], ...
- * [IFLA_VF_PORT]
- * [IFLA_PORT_*], ...
- * ...
- * [IFLA_PORT_SELF]
- * [IFLA_PORT_*], ...
- */
-
-enum {
- IFLA_VF_PORT_UNSPEC,
- IFLA_VF_PORT, /* nest */
- __IFLA_VF_PORT_MAX,
-};
-
-#define IFLA_VF_PORT_MAX (__IFLA_VF_PORT_MAX - 1)
-
-enum {
- IFLA_PORT_UNSPEC,
- IFLA_PORT_VF, /* __u32 */
- IFLA_PORT_PROFILE, /* string */
- IFLA_PORT_VSI_TYPE, /* 802.1Qbg (pre-)standard VDP */
- IFLA_PORT_INSTANCE_UUID, /* binary UUID */
- IFLA_PORT_HOST_UUID, /* binary UUID */
- IFLA_PORT_REQUEST, /* __u8 */
- IFLA_PORT_RESPONSE, /* __u16, output only */
- __IFLA_PORT_MAX,
-};
-
-#define IFLA_PORT_MAX (__IFLA_PORT_MAX - 1)
-
-#define PORT_PROFILE_MAX 40
-#define PORT_UUID_MAX 16
-#define PORT_SELF_VF -1
-
-enum {
- PORT_REQUEST_PREASSOCIATE = 0,
- PORT_REQUEST_PREASSOCIATE_RR,
- PORT_REQUEST_ASSOCIATE,
- PORT_REQUEST_DISASSOCIATE,
-};
-
-enum {
- PORT_VDP_RESPONSE_SUCCESS = 0,
- PORT_VDP_RESPONSE_INVALID_FORMAT,
- PORT_VDP_RESPONSE_INSUFFICIENT_RESOURCES,
- PORT_VDP_RESPONSE_UNUSED_VTID,
- PORT_VDP_RESPONSE_VTID_VIOLATION,
- PORT_VDP_RESPONSE_VTID_VERSION_VIOALTION,
- PORT_VDP_RESPONSE_OUT_OF_SYNC,
- /* 0x08-0xFF reserved for future VDP use */
- PORT_PROFILE_RESPONSE_SUCCESS = 0x100,
- PORT_PROFILE_RESPONSE_INPROGRESS,
- PORT_PROFILE_RESPONSE_INVALID,
- PORT_PROFILE_RESPONSE_BADSTATE,
- PORT_PROFILE_RESPONSE_INSUFFICIENT_RESOURCES,
- PORT_PROFILE_RESPONSE_ERROR,
-};
-
-struct ifla_port_vsi {
- __u8 vsi_mgr_id;
- __u8 vsi_type_id[3];
- __u8 vsi_type_version;
- __u8 pad[3];
-};
-
-
-/* IPoIB section */
-
-enum {
- IFLA_IPOIB_UNSPEC,
- IFLA_IPOIB_PKEY,
- IFLA_IPOIB_MODE,
- IFLA_IPOIB_UMCAST,
- __IFLA_IPOIB_MAX
-};
-
-enum {
- IPOIB_MODE_DATAGRAM = 0, /* using unreliable datagram QPs */
- IPOIB_MODE_CONNECTED = 1, /* using connected QPs */
-};
-
-#define IFLA_IPOIB_MAX (__IFLA_IPOIB_MAX - 1)
-
#endif /* _LINUX_IF_LINK_H */
diff --git a/include/linux/if_ltalk.h b/include/linux/if_ltalk.h
index 7652576..81e434c 100644
--- a/include/linux/if_ltalk.h
+++ b/include/linux/if_ltalk.h
@@ -1,12 +1,7 @@
#ifndef __LINUX_LTALK_H
#define __LINUX_LTALK_H
-#define LTALK_HLEN 1
-#define LTALK_MTU 600
-#define LTALK_ALEN 1
+#include <uapi/linux/if_ltalk.h>
-#ifdef __KERNEL__
extern struct net_device *alloc_ltalkdev(int sizeof_priv);
#endif
-
-#endif
diff --git a/include/linux/if_phonet.h b/include/linux/if_phonet.h
index d70034b..bbcdb0a 100644
--- a/include/linux/if_phonet.h
+++ b/include/linux/if_phonet.h
@@ -8,12 +8,7 @@
#ifndef LINUX_IF_PHONET_H
#define LINUX_IF_PHONET_H
-#define PHONET_MIN_MTU 6 /* pn_length = 0 */
-#define PHONET_MAX_MTU 65541 /* pn_length = 0xffff */
-#define PHONET_DEV_MTU PHONET_MAX_MTU
+#include <uapi/linux/if_phonet.h>
-#ifdef __KERNEL__
extern struct header_ops phonet_header_ops;
#endif
-
-#endif
diff --git a/include/linux/if_pppol2tp.h b/include/linux/if_pppol2tp.h
index b477541..0fb71e5 100644
--- a/include/linux/if_pppol2tp.h
+++ b/include/linux/if_pppol2tp.h
@@ -11,98 +11,11 @@
* 2 of the License, or (at your option) any later version.
*
*/
-
#ifndef __LINUX_IF_PPPOL2TP_H
#define __LINUX_IF_PPPOL2TP_H
-#include <linux/types.h>
-
-#ifdef __KERNEL__
#include <linux/in.h>
#include <linux/in6.h>
-#endif
-
-/* Structure used to connect() the socket to a particular tunnel UDP
- * socket over IPv4.
- */
-struct pppol2tp_addr {
- __kernel_pid_t pid; /* pid that owns the fd.
- * 0 => current */
- int fd; /* FD of UDP socket to use */
-
- struct sockaddr_in addr; /* IP address and port to send to */
-
- __u16 s_tunnel, s_session; /* For matching incoming packets */
- __u16 d_tunnel, d_session; /* For sending outgoing packets */
-};
-
-/* Structure used to connect() the socket to a particular tunnel UDP
- * socket over IPv6.
- */
-struct pppol2tpin6_addr {
- __kernel_pid_t pid; /* pid that owns the fd.
- * 0 => current */
- int fd; /* FD of UDP socket to use */
-
- __u16 s_tunnel, s_session; /* For matching incoming packets */
- __u16 d_tunnel, d_session; /* For sending outgoing packets */
-
- struct sockaddr_in6 addr; /* IP address and port to send to */
-};
-
-/* The L2TPv3 protocol changes tunnel and session ids from 16 to 32
- * bits. So we need a different sockaddr structure.
- */
-struct pppol2tpv3_addr {
- __kernel_pid_t pid; /* pid that owns the fd.
- * 0 => current */
- int fd; /* FD of UDP or IP socket to use */
-
- struct sockaddr_in addr; /* IP address and port to send to */
-
- __u32 s_tunnel, s_session; /* For matching incoming packets */
- __u32 d_tunnel, d_session; /* For sending outgoing packets */
-};
-
-struct pppol2tpv3in6_addr {
- __kernel_pid_t pid; /* pid that owns the fd.
- * 0 => current */
- int fd; /* FD of UDP or IP socket to use */
-
- __u32 s_tunnel, s_session; /* For matching incoming packets */
- __u32 d_tunnel, d_session; /* For sending outgoing packets */
-
- struct sockaddr_in6 addr; /* IP address and port to send to */
-};
-
-/* Socket options:
- * DEBUG - bitmask of debug message categories
- * SENDSEQ - 0 => don't send packets with sequence numbers
- * 1 => send packets with sequence numbers
- * RECVSEQ - 0 => receive packet sequence numbers are optional
- * 1 => drop receive packets without sequence numbers
- * LNSMODE - 0 => act as LAC.
- * 1 => act as LNS.
- * REORDERTO - reorder timeout (in millisecs). If 0, don't try to reorder.
- */
-enum {
- PPPOL2TP_SO_DEBUG = 1,
- PPPOL2TP_SO_RECVSEQ = 2,
- PPPOL2TP_SO_SENDSEQ = 3,
- PPPOL2TP_SO_LNSMODE = 4,
- PPPOL2TP_SO_REORDERTO = 5,
-};
-
-/* Debug message categories for the DEBUG socket option */
-enum {
- PPPOL2TP_MSG_DEBUG = (1 << 0), /* verbose debug (if
- * compiled in) */
- PPPOL2TP_MSG_CONTROL = (1 << 1), /* userspace - kernel
- * interface */
- PPPOL2TP_MSG_SEQ = (1 << 2), /* sequence numbers */
- PPPOL2TP_MSG_DATA = (1 << 3), /* data packets */
-};
-
-
+#include <uapi/linux/if_pppol2tp.h>
#endif
diff --git a/include/linux/if_pppox.h b/include/linux/if_pppox.h
index 09c474c..aff7ad8 100644
--- a/include/linux/if_pppox.h
+++ b/include/linux/if_pppox.h
@@ -12,153 +12,14 @@
* 2 of the License, or (at your option) any later version.
*
*/
-
#ifndef __LINUX_IF_PPPOX_H
#define __LINUX_IF_PPPOX_H
-
-#include <linux/types.h>
-#include <asm/byteorder.h>
-
-#include <linux/socket.h>
-#include <linux/if_ether.h>
-#ifdef __KERNEL__
#include <linux/if.h>
#include <linux/netdevice.h>
#include <linux/ppp_channel.h>
-#endif /* __KERNEL__ */
-#include <linux/if_pppol2tp.h>
-
-/* For user-space programs to pick up these definitions
- * which they wouldn't get otherwise without defining __KERNEL__
- */
-#ifndef AF_PPPOX
-#define AF_PPPOX 24
-#define PF_PPPOX AF_PPPOX
-#endif /* !(AF_PPPOX) */
-
-/************************************************************************
- * PPPoE addressing definition
- */
-typedef __be16 sid_t;
-struct pppoe_addr {
- sid_t sid; /* Session identifier */
- unsigned char remote[ETH_ALEN]; /* Remote address */
- char dev[IFNAMSIZ]; /* Local device to use */
-};
-
-/************************************************************************
- * PPTP addressing definition
- */
-struct pptp_addr {
- __be16 call_id;
- struct in_addr sin_addr;
-};
-
-/************************************************************************
- * Protocols supported by AF_PPPOX
- */
-#define PX_PROTO_OE 0 /* Currently just PPPoE */
-#define PX_PROTO_OL2TP 1 /* Now L2TP also */
-#define PX_PROTO_PPTP 2
-#define PX_MAX_PROTO 3
-
-struct sockaddr_pppox {
- __kernel_sa_family_t sa_family; /* address family, AF_PPPOX */
- unsigned int sa_protocol; /* protocol identifier */
- union {
- struct pppoe_addr pppoe;
- struct pptp_addr pptp;
- } sa_addr;
-} __packed;
-
-/* The use of the above union isn't viable because the size of this
- * struct must stay fixed over time -- applications use sizeof(struct
- * sockaddr_pppox) to fill it. We use a protocol specific sockaddr
- * type instead.
- */
-struct sockaddr_pppol2tp {
- __kernel_sa_family_t sa_family; /* address family, AF_PPPOX */
- unsigned int sa_protocol; /* protocol identifier */
- struct pppol2tp_addr pppol2tp;
-} __packed;
-
-struct sockaddr_pppol2tpin6 {
- __kernel_sa_family_t sa_family; /* address family, AF_PPPOX */
- unsigned int sa_protocol; /* protocol identifier */
- struct pppol2tpin6_addr pppol2tp;
-} __packed;
-
-/* The L2TPv3 protocol changes tunnel and session ids from 16 to 32
- * bits. So we need a different sockaddr structure.
- */
-struct sockaddr_pppol2tpv3 {
- __kernel_sa_family_t sa_family; /* address family, AF_PPPOX */
- unsigned int sa_protocol; /* protocol identifier */
- struct pppol2tpv3_addr pppol2tp;
-} __packed;
-
-struct sockaddr_pppol2tpv3in6 {
- __kernel_sa_family_t sa_family; /* address family, AF_PPPOX */
- unsigned int sa_protocol; /* protocol identifier */
- struct pppol2tpv3in6_addr pppol2tp;
-} __packed;
-
-/*********************************************************************
- *
- * ioctl interface for defining forwarding of connections
- *
- ********************************************************************/
-
-#define PPPOEIOCSFWD _IOW(0xB1 ,0, size_t)
-#define PPPOEIOCDFWD _IO(0xB1 ,1)
-/*#define PPPOEIOCGFWD _IOWR(0xB1,2, size_t)*/
-
-/* Codes to identify message types */
-#define PADI_CODE 0x09
-#define PADO_CODE 0x07
-#define PADR_CODE 0x19
-#define PADS_CODE 0x65
-#define PADT_CODE 0xa7
-struct pppoe_tag {
- __be16 tag_type;
- __be16 tag_len;
- char tag_data[0];
-} __attribute__ ((packed));
-
-/* Tag identifiers */
-#define PTT_EOL __cpu_to_be16(0x0000)
-#define PTT_SRV_NAME __cpu_to_be16(0x0101)
-#define PTT_AC_NAME __cpu_to_be16(0x0102)
-#define PTT_HOST_UNIQ __cpu_to_be16(0x0103)
-#define PTT_AC_COOKIE __cpu_to_be16(0x0104)
-#define PTT_VENDOR __cpu_to_be16(0x0105)
-#define PTT_RELAY_SID __cpu_to_be16(0x0110)
-#define PTT_SRV_ERR __cpu_to_be16(0x0201)
-#define PTT_SYS_ERR __cpu_to_be16(0x0202)
-#define PTT_GEN_ERR __cpu_to_be16(0x0203)
-
-struct pppoe_hdr {
-#if defined(__LITTLE_ENDIAN_BITFIELD)
- __u8 ver : 4;
- __u8 type : 4;
-#elif defined(__BIG_ENDIAN_BITFIELD)
- __u8 type : 4;
- __u8 ver : 4;
-#else
-#error "Please fix <asm/byteorder.h>"
-#endif
- __u8 code;
- __be16 sid;
- __be16 length;
- struct pppoe_tag tag[0];
-} __packed;
-
-/* Length of entire PPPoE + PPP header */
-#define PPPOE_SES_HLEN 8
-
-#ifdef __KERNEL__
#include <linux/skbuff.h>
+#include <uapi/linux/if_pppox.h>
static inline struct pppoe_hdr *pppoe_hdr(const struct sk_buff *skb)
{
@@ -232,6 +93,4 @@
PPPOX_DEAD = 16 /* dead, useless, please clean me up!*/
};
-#endif /* __KERNEL__ */
-
#endif /* !(__LINUX_IF_PPPOX_H) */
diff --git a/include/linux/if_team.h b/include/linux/if_team.h
index 6d88a7f..0245def 100644
--- a/include/linux/if_team.h
+++ b/include/linux/if_team.h
@@ -7,14 +7,13 @@
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
-
#ifndef _LINUX_IF_TEAM_H_
#define _LINUX_IF_TEAM_H_
-#ifdef __KERNEL__
#include <linux/netpoll.h>
#include <net/sch_generic.h>
+#include <uapi/linux/if_team.h>
struct team_pcpu_stats {
u64 rx_packets;
@@ -251,98 +250,4 @@
#define TEAM_DEFAULT_NUM_TX_QUEUES 16
#define TEAM_DEFAULT_NUM_RX_QUEUES 16
-#endif /* __KERNEL__ */
-
-#define TEAM_STRING_MAX_LEN 32
-
-/**********************************
- * NETLINK_GENERIC netlink family.
- **********************************/
-
-enum {
- TEAM_CMD_NOOP,
- TEAM_CMD_OPTIONS_SET,
- TEAM_CMD_OPTIONS_GET,
- TEAM_CMD_PORT_LIST_GET,
-
- __TEAM_CMD_MAX,
- TEAM_CMD_MAX = (__TEAM_CMD_MAX - 1),
-};
-
-enum {
- TEAM_ATTR_UNSPEC,
- TEAM_ATTR_TEAM_IFINDEX, /* u32 */
- TEAM_ATTR_LIST_OPTION, /* nest */
- TEAM_ATTR_LIST_PORT, /* nest */
-
- __TEAM_ATTR_MAX,
- TEAM_ATTR_MAX = __TEAM_ATTR_MAX - 1,
-};
-
-/* Nested layout of get/set msg:
- *
- * [TEAM_ATTR_LIST_OPTION]
- * [TEAM_ATTR_ITEM_OPTION]
- * [TEAM_ATTR_OPTION_*], ...
- * [TEAM_ATTR_ITEM_OPTION]
- * [TEAM_ATTR_OPTION_*], ...
- * ...
- * [TEAM_ATTR_LIST_PORT]
- * [TEAM_ATTR_ITEM_PORT]
- * [TEAM_ATTR_PORT_*], ...
- * [TEAM_ATTR_ITEM_PORT]
- * [TEAM_ATTR_PORT_*], ...
- * ...
- */
-
-enum {
- TEAM_ATTR_ITEM_OPTION_UNSPEC,
- TEAM_ATTR_ITEM_OPTION, /* nest */
-
- __TEAM_ATTR_ITEM_OPTION_MAX,
- TEAM_ATTR_ITEM_OPTION_MAX = __TEAM_ATTR_ITEM_OPTION_MAX - 1,
-};
-
-enum {
- TEAM_ATTR_OPTION_UNSPEC,
- TEAM_ATTR_OPTION_NAME, /* string */
- TEAM_ATTR_OPTION_CHANGED, /* flag */
- TEAM_ATTR_OPTION_TYPE, /* u8 */
- TEAM_ATTR_OPTION_DATA, /* dynamic */
- TEAM_ATTR_OPTION_REMOVED, /* flag */
- TEAM_ATTR_OPTION_PORT_IFINDEX, /* u32 */ /* for per-port options */
- TEAM_ATTR_OPTION_ARRAY_INDEX, /* u32 */ /* for array options */
-
- __TEAM_ATTR_OPTION_MAX,
- TEAM_ATTR_OPTION_MAX = __TEAM_ATTR_OPTION_MAX - 1,
-};
-
-enum {
- TEAM_ATTR_ITEM_PORT_UNSPEC,
- TEAM_ATTR_ITEM_PORT, /* nest */
-
- __TEAM_ATTR_ITEM_PORT_MAX,
- TEAM_ATTR_ITEM_PORT_MAX = __TEAM_ATTR_ITEM_PORT_MAX - 1,
-};
-
-enum {
- TEAM_ATTR_PORT_UNSPEC,
- TEAM_ATTR_PORT_IFINDEX, /* u32 */
- TEAM_ATTR_PORT_CHANGED, /* flag */
- TEAM_ATTR_PORT_LINKUP, /* flag */
- TEAM_ATTR_PORT_SPEED, /* u32 */
- TEAM_ATTR_PORT_DUPLEX, /* u8 */
- TEAM_ATTR_PORT_REMOVED, /* flag */
-
- __TEAM_ATTR_PORT_MAX,
- TEAM_ATTR_PORT_MAX = __TEAM_ATTR_PORT_MAX - 1,
-};
-
-/*
- * NETLINK_GENERIC related info
- */
-#define TEAM_GENL_NAME "team"
-#define TEAM_GENL_VERSION 0x1
-#define TEAM_GENL_CHANGE_EVENT_MC_GRP_NAME "change_event"
-
#endif /* _LINUX_IF_TEAM_H_ */
diff --git a/include/linux/if_tun.h b/include/linux/if_tun.h
index 06b1829..ed6da2e 100644
--- a/include/linux/if_tun.h
+++ b/include/linux/if_tun.h
@@ -12,86 +12,11 @@
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
-
#ifndef __IF_TUN_H
#define __IF_TUN_H
-#include <linux/types.h>
-#include <linux/if_ether.h>
-#include <linux/filter.h>
+#include <uapi/linux/if_tun.h>
-/* Read queue size */
-#define TUN_READQ_SIZE 500
-
-/* TUN device flags */
-#define TUN_TUN_DEV 0x0001
-#define TUN_TAP_DEV 0x0002
-#define TUN_TYPE_MASK 0x000f
-
-#define TUN_FASYNC 0x0010
-#define TUN_NOCHECKSUM 0x0020
-#define TUN_NO_PI 0x0040
-#define TUN_ONE_QUEUE 0x0080
-#define TUN_PERSIST 0x0100
-#define TUN_VNET_HDR 0x0200
-
-/* Ioctl defines */
-#define TUNSETNOCSUM _IOW('T', 200, int)
-#define TUNSETDEBUG _IOW('T', 201, int)
-#define TUNSETIFF _IOW('T', 202, int)
-#define TUNSETPERSIST _IOW('T', 203, int)
-#define TUNSETOWNER _IOW('T', 204, int)
-#define TUNSETLINK _IOW('T', 205, int)
-#define TUNSETGROUP _IOW('T', 206, int)
-#define TUNGETFEATURES _IOR('T', 207, unsigned int)
-#define TUNSETOFFLOAD _IOW('T', 208, unsigned int)
-#define TUNSETTXFILTER _IOW('T', 209, unsigned int)
-#define TUNGETIFF _IOR('T', 210, unsigned int)
-#define TUNGETSNDBUF _IOR('T', 211, int)
-#define TUNSETSNDBUF _IOW('T', 212, int)
-#define TUNATTACHFILTER _IOW('T', 213, struct sock_fprog)
-#define TUNDETACHFILTER _IOW('T', 214, struct sock_fprog)
-#define TUNGETVNETHDRSZ _IOR('T', 215, int)
-#define TUNSETVNETHDRSZ _IOW('T', 216, int)
-
-/* TUNSETIFF ifr flags */
-#define IFF_TUN 0x0001
-#define IFF_TAP 0x0002
-#define IFF_NO_PI 0x1000
-#define IFF_ONE_QUEUE 0x2000
-#define IFF_VNET_HDR 0x4000
-#define IFF_TUN_EXCL 0x8000
-
-/* Features for GSO (TUNSETOFFLOAD). */
-#define TUN_F_CSUM 0x01 /* You can hand me unchecksummed packets. */
-#define TUN_F_TSO4 0x02 /* I can handle TSO for IPv4 packets */
-#define TUN_F_TSO6 0x04 /* I can handle TSO for IPv6 packets */
-#define TUN_F_TSO_ECN 0x08 /* I can handle TSO with ECN bits. */
-#define TUN_F_UFO 0x10 /* I can handle UFO packets */
-
-/* Protocol info prepended to the packets (when IFF_NO_PI is not set) */
-#define TUN_PKT_STRIP 0x0001
-struct tun_pi {
- __u16 flags;
- __be16 proto;
-};
-
-/*
- * Filter spec (used for SETXXFILTER ioctls)
- * This stuff is applicable only to the TAP (Ethernet) devices.
- * If the count is zero the filter is disabled and the driver accepts
- * all packets (promisc mode).
- * If the filter is enabled in order to accept broadcast packets
- * broadcast addr must be explicitly included in the addr list.
- */
-#define TUN_FLT_ALLMULTI 0x0001 /* Accept all multicast packets */
-struct tun_filter {
- __u16 flags; /* TUN_FLT_ flags see above */
- __u16 count; /* Number of addresses */
- __u8 addr[0][ETH_ALEN];
-};
-
-#ifdef __KERNEL__
#if defined(CONFIG_TUN) || defined(CONFIG_TUN_MODULE)
struct socket *tun_get_socket(struct file *);
#else
@@ -104,5 +29,4 @@
return ERR_PTR(-EINVAL);
}
#endif /* CONFIG_TUN */
-#endif /* __KERNEL__ */
#endif /* __IF_TUN_H */
diff --git a/include/linux/if_tunnel.h b/include/linux/if_tunnel.h
index 8c5035ac..1cc595a 100644
--- a/include/linux/if_tunnel.h
+++ b/include/linux/if_tunnel.h
@@ -1,100 +1,8 @@
#ifndef _IF_TUNNEL_H_
#define _IF_TUNNEL_H_
-#include <linux/types.h>
-#include <asm/byteorder.h>
-
-#ifdef __KERNEL__
#include <linux/ip.h>
#include <linux/in6.h>
-#endif
+#include <uapi/linux/if_tunnel.h>
-#define SIOCGETTUNNEL (SIOCDEVPRIVATE + 0)
-#define SIOCADDTUNNEL (SIOCDEVPRIVATE + 1)
-#define SIOCDELTUNNEL (SIOCDEVPRIVATE + 2)
-#define SIOCCHGTUNNEL (SIOCDEVPRIVATE + 3)
-#define SIOCGETPRL (SIOCDEVPRIVATE + 4)
-#define SIOCADDPRL (SIOCDEVPRIVATE + 5)
-#define SIOCDELPRL (SIOCDEVPRIVATE + 6)
-#define SIOCCHGPRL (SIOCDEVPRIVATE + 7)
-#define SIOCGET6RD (SIOCDEVPRIVATE + 8)
-#define SIOCADD6RD (SIOCDEVPRIVATE + 9)
-#define SIOCDEL6RD (SIOCDEVPRIVATE + 10)
-#define SIOCCHG6RD (SIOCDEVPRIVATE + 11)
-
-#define GRE_CSUM __cpu_to_be16(0x8000)
-#define GRE_ROUTING __cpu_to_be16(0x4000)
-#define GRE_KEY __cpu_to_be16(0x2000)
-#define GRE_SEQ __cpu_to_be16(0x1000)
-#define GRE_STRICT __cpu_to_be16(0x0800)
-#define GRE_REC __cpu_to_be16(0x0700)
-#define GRE_FLAGS __cpu_to_be16(0x00F8)
-#define GRE_VERSION __cpu_to_be16(0x0007)
-
-struct ip_tunnel_parm {
- char name[IFNAMSIZ];
- int link;
- __be16 i_flags;
- __be16 o_flags;
- __be32 i_key;
- __be32 o_key;
- struct iphdr iph;
-};
-
-/* SIT-mode i_flags */
-#define SIT_ISATAP 0x0001
-
-struct ip_tunnel_prl {
- __be32 addr;
- __u16 flags;
- __u16 __reserved;
- __u32 datalen;
- __u32 __reserved2;
- /* data follows */
-};
-
-/* PRL flags */
-#define PRL_DEFAULT 0x0001
-
-struct ip_tunnel_6rd {
- struct in6_addr prefix;
- __be32 relay_prefix;
- __u16 prefixlen;
- __u16 relay_prefixlen;
-};
-
-enum {
- IFLA_GRE_UNSPEC,
- IFLA_GRE_LINK,
- IFLA_GRE_IFLAGS,
- IFLA_GRE_OFLAGS,
- IFLA_GRE_IKEY,
- IFLA_GRE_OKEY,
- IFLA_GRE_LOCAL,
- IFLA_GRE_REMOTE,
- IFLA_GRE_TTL,
- IFLA_GRE_TOS,
- IFLA_GRE_PMTUDISC,
- IFLA_GRE_ENCAP_LIMIT,
- IFLA_GRE_FLOWINFO,
- IFLA_GRE_FLAGS,
- __IFLA_GRE_MAX,
-};
-
-#define IFLA_GRE_MAX (__IFLA_GRE_MAX - 1)
-
-/* VTI-mode i_flags */
-#define VTI_ISVTI 0x0001
-
-enum {
- IFLA_VTI_UNSPEC,
- IFLA_VTI_LINK,
- IFLA_VTI_IKEY,
- IFLA_VTI_OKEY,
- IFLA_VTI_LOCAL,
- IFLA_VTI_REMOTE,
- __IFLA_VTI_MAX,
-};
-
-#define IFLA_VTI_MAX (__IFLA_VTI_MAX - 1)
#endif /* _IF_TUNNEL_H_ */
diff --git a/include/linux/if_vlan.h b/include/linux/if_vlan.h
index c0ff748..d06cc5c 100644
--- a/include/linux/if_vlan.h
+++ b/include/linux/if_vlan.h
@@ -9,15 +9,14 @@
* 2 of the License, or (at your option) any later version.
*
*/
-
#ifndef _LINUX_IF_VLAN_H_
#define _LINUX_IF_VLAN_H_
-#ifdef __KERNEL__
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/rtnetlink.h>
#include <linux/bug.h>
+#include <uapi/linux/if_vlan.h>
#define VLAN_HLEN 4 /* The additional bytes required by VLAN
* (in addition to the Ethernet header)
@@ -361,52 +360,4 @@
*/
skb->protocol = htons(ETH_P_802_2);
}
-#endif /* __KERNEL__ */
-
-/* VLAN IOCTLs are found in sockios.h */
-
-/* Passed in vlan_ioctl_args structure to determine behaviour. */
-enum vlan_ioctl_cmds {
- ADD_VLAN_CMD,
- DEL_VLAN_CMD,
- SET_VLAN_INGRESS_PRIORITY_CMD,
- SET_VLAN_EGRESS_PRIORITY_CMD,
- GET_VLAN_INGRESS_PRIORITY_CMD,
- GET_VLAN_EGRESS_PRIORITY_CMD,
- SET_VLAN_NAME_TYPE_CMD,
- SET_VLAN_FLAG_CMD,
- GET_VLAN_REALDEV_NAME_CMD, /* If this works, you know it's a VLAN device, btw */
- GET_VLAN_VID_CMD /* Get the VID of this VLAN (specified by name) */
-};
-
-enum vlan_flags {
- VLAN_FLAG_REORDER_HDR = 0x1,
- VLAN_FLAG_GVRP = 0x2,
- VLAN_FLAG_LOOSE_BINDING = 0x4,
-};
-
-enum vlan_name_types {
- VLAN_NAME_TYPE_PLUS_VID, /* Name will look like: vlan0005 */
- VLAN_NAME_TYPE_RAW_PLUS_VID, /* name will look like: eth1.0005 */
- VLAN_NAME_TYPE_PLUS_VID_NO_PAD, /* Name will look like: vlan5 */
- VLAN_NAME_TYPE_RAW_PLUS_VID_NO_PAD, /* Name will look like: eth0.5 */
- VLAN_NAME_TYPE_HIGHEST
-};
-
-struct vlan_ioctl_args {
- int cmd; /* Should be one of the vlan_ioctl_cmds enum above. */
- char device1[24];
-
- union {
- char device2[24];
- int VID;
- unsigned int skb_priority;
- unsigned int name_type;
- unsigned int bind_type;
- unsigned int flag; /* Matches vlan_dev_priv flags */
- } u;
-
- short vlan_qos;
-};
-
#endif /* !(_LINUX_IF_VLAN_H_) */
diff --git a/include/linux/igmp.h b/include/linux/igmp.h
index 82de336..7f2bf15 100644
--- a/include/linux/igmp.h
+++ b/include/linux/igmp.h
@@ -12,123 +12,13 @@
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
-
#ifndef _LINUX_IGMP_H
#define _LINUX_IGMP_H
-#include <linux/types.h>
-#include <asm/byteorder.h>
-
-/*
- * IGMP protocol structures
- */
-
-/*
- * Header in on cable format
- */
-
-struct igmphdr {
- __u8 type;
- __u8 code; /* For newer IGMP */
- __sum16 csum;
- __be32 group;
-};
-
-/* V3 group record types [grec_type] */
-#define IGMPV3_MODE_IS_INCLUDE 1
-#define IGMPV3_MODE_IS_EXCLUDE 2
-#define IGMPV3_CHANGE_TO_INCLUDE 3
-#define IGMPV3_CHANGE_TO_EXCLUDE 4
-#define IGMPV3_ALLOW_NEW_SOURCES 5
-#define IGMPV3_BLOCK_OLD_SOURCES 6
-
-struct igmpv3_grec {
- __u8 grec_type;
- __u8 grec_auxwords;
- __be16 grec_nsrcs;
- __be32 grec_mca;
- __be32 grec_src[0];
-};
-
-struct igmpv3_report {
- __u8 type;
- __u8 resv1;
- __be16 csum;
- __be16 resv2;
- __be16 ngrec;
- struct igmpv3_grec grec[0];
-};
-
-struct igmpv3_query {
- __u8 type;
- __u8 code;
- __be16 csum;
- __be32 group;
-#if defined(__LITTLE_ENDIAN_BITFIELD)
- __u8 qrv:3,
- suppress:1,
- resv:4;
-#elif defined(__BIG_ENDIAN_BITFIELD)
- __u8 resv:4,
- suppress:1,
- qrv:3;
-#else
-#error "Please fix <asm/byteorder.h>"
-#endif
- __u8 qqic;
- __be16 nsrcs;
- __be32 srcs[0];
-};
-
-#define IGMP_HOST_MEMBERSHIP_QUERY 0x11 /* From RFC1112 */
-#define IGMP_HOST_MEMBERSHIP_REPORT 0x12 /* Ditto */
-#define IGMP_DVMRP 0x13 /* DVMRP routing */
-#define IGMP_PIM 0x14 /* PIM routing */
-#define IGMP_TRACE 0x15
-#define IGMPV2_HOST_MEMBERSHIP_REPORT 0x16 /* V2 version of 0x12 */
-#define IGMP_HOST_LEAVE_MESSAGE 0x17
-#define IGMPV3_HOST_MEMBERSHIP_REPORT 0x22 /* V3 version of 0x12 */
-
-#define IGMP_MTRACE_RESP 0x1e
-#define IGMP_MTRACE 0x1f
-
-
-/*
- * Use the BSD names for these for compatibility
- */
-
-#define IGMP_DELAYING_MEMBER 0x01
-#define IGMP_IDLE_MEMBER 0x02
-#define IGMP_LAZY_MEMBER 0x03
-#define IGMP_SLEEPING_MEMBER 0x04
-#define IGMP_AWAKENING_MEMBER 0x05
-
-#define IGMP_MINLEN 8
-
-#define IGMP_MAX_HOST_REPORT_DELAY 10 /* max delay for response to */
- /* query (in seconds) */
-
-#define IGMP_TIMER_SCALE 10 /* denotes that the igmphdr->timer field */
- /* specifies time in 10th of seconds */
-
-#define IGMP_AGE_THRESHOLD 400 /* If this host don't hear any IGMP V1 */
- /* message in this period of time, */
- /* revert to IGMP v2 router. */
-
-#define IGMP_ALL_HOSTS htonl(0xE0000001L)
-#define IGMP_ALL_ROUTER htonl(0xE0000002L)
-#define IGMPV3_ALL_MCR htonl(0xE0000016L)
-#define IGMP_LOCAL_GROUP htonl(0xE0000000L)
-#define IGMP_LOCAL_GROUP_MASK htonl(0xFFFFFF00L)
-
-/*
- * struct for keeping the multicast list in
- */
-
-#ifdef __KERNEL__
#include <linux/skbuff.h>
#include <linux/timer.h>
#include <linux/in.h>
+#include <uapi/linux/igmp.h>
static inline struct igmphdr *igmp_hdr(const struct sk_buff *skb)
{
@@ -241,4 +131,3 @@
extern void ip_mc_rejoin_groups(struct in_device *in_dev);
#endif
-#endif
diff --git a/include/linux/in.h b/include/linux/in.h
index e0337f1..31b4937 100644
--- a/include/linux/in.h
+++ b/include/linux/in.h
@@ -18,240 +18,9 @@
#ifndef _LINUX_IN_H
#define _LINUX_IN_H
-#include <linux/types.h>
-#include <linux/socket.h>
-
-/* Standard well-defined IP protocols. */
-enum {
- IPPROTO_IP = 0, /* Dummy protocol for TCP */
- IPPROTO_ICMP = 1, /* Internet Control Message Protocol */
- IPPROTO_IGMP = 2, /* Internet Group Management Protocol */
- IPPROTO_IPIP = 4, /* IPIP tunnels (older KA9Q tunnels use 94) */
- IPPROTO_TCP = 6, /* Transmission Control Protocol */
- IPPROTO_EGP = 8, /* Exterior Gateway Protocol */
- IPPROTO_PUP = 12, /* PUP protocol */
- IPPROTO_UDP = 17, /* User Datagram Protocol */
- IPPROTO_IDP = 22, /* XNS IDP protocol */
- IPPROTO_DCCP = 33, /* Datagram Congestion Control Protocol */
- IPPROTO_RSVP = 46, /* RSVP protocol */
- IPPROTO_GRE = 47, /* Cisco GRE tunnels (rfc 1701,1702) */
-
- IPPROTO_IPV6 = 41, /* IPv6-in-IPv4 tunnelling */
-
- IPPROTO_ESP = 50, /* Encapsulation Security Payload protocol */
- IPPROTO_AH = 51, /* Authentication Header protocol */
- IPPROTO_BEETPH = 94, /* IP option pseudo header for BEET */
- IPPROTO_PIM = 103, /* Protocol Independent Multicast */
-
- IPPROTO_COMP = 108, /* Compression Header protocol */
- IPPROTO_SCTP = 132, /* Stream Control Transport Protocol */
- IPPROTO_UDPLITE = 136, /* UDP-Lite (RFC 3828) */
-
- IPPROTO_RAW = 255, /* Raw IP packets */
- IPPROTO_MAX
-};
-
-
-/* Internet address. */
-struct in_addr {
- __be32 s_addr;
-};
-
-#define IP_TOS 1
-#define IP_TTL 2
-#define IP_HDRINCL 3
-#define IP_OPTIONS 4
-#define IP_ROUTER_ALERT 5
-#define IP_RECVOPTS 6
-#define IP_RETOPTS 7
-#define IP_PKTINFO 8
-#define IP_PKTOPTIONS 9
-#define IP_MTU_DISCOVER 10
-#define IP_RECVERR 11
-#define IP_RECVTTL 12
-#define IP_RECVTOS 13
-#define IP_MTU 14
-#define IP_FREEBIND 15
-#define IP_IPSEC_POLICY 16
-#define IP_XFRM_POLICY 17
-#define IP_PASSSEC 18
-#define IP_TRANSPARENT 19
-
-/* BSD compatibility */
-#define IP_RECVRETOPTS IP_RETOPTS
-
-/* TProxy original addresses */
-#define IP_ORIGDSTADDR 20
-#define IP_RECVORIGDSTADDR IP_ORIGDSTADDR
-
-#define IP_MINTTL 21
-#define IP_NODEFRAG 22
-
-/* IP_MTU_DISCOVER values */
-#define IP_PMTUDISC_DONT 0 /* Never send DF frames */
-#define IP_PMTUDISC_WANT 1 /* Use per route hints */
-#define IP_PMTUDISC_DO 2 /* Always DF */
-#define IP_PMTUDISC_PROBE 3 /* Ignore dst pmtu */
-
-#define IP_MULTICAST_IF 32
-#define IP_MULTICAST_TTL 33
-#define IP_MULTICAST_LOOP 34
-#define IP_ADD_MEMBERSHIP 35
-#define IP_DROP_MEMBERSHIP 36
-#define IP_UNBLOCK_SOURCE 37
-#define IP_BLOCK_SOURCE 38
-#define IP_ADD_SOURCE_MEMBERSHIP 39
-#define IP_DROP_SOURCE_MEMBERSHIP 40
-#define IP_MSFILTER 41
-#define MCAST_JOIN_GROUP 42
-#define MCAST_BLOCK_SOURCE 43
-#define MCAST_UNBLOCK_SOURCE 44
-#define MCAST_LEAVE_GROUP 45
-#define MCAST_JOIN_SOURCE_GROUP 46
-#define MCAST_LEAVE_SOURCE_GROUP 47
-#define MCAST_MSFILTER 48
-#define IP_MULTICAST_ALL 49
-#define IP_UNICAST_IF 50
-
-#define MCAST_EXCLUDE 0
-#define MCAST_INCLUDE 1
-
-/* These need to appear somewhere around here */
-#define IP_DEFAULT_MULTICAST_TTL 1
-#define IP_DEFAULT_MULTICAST_LOOP 1
-
-/* Request struct for multicast socket ops */
-
-struct ip_mreq {
- struct in_addr imr_multiaddr; /* IP multicast address of group */
- struct in_addr imr_interface; /* local IP address of interface */
-};
-
-struct ip_mreqn {
- struct in_addr imr_multiaddr; /* IP multicast address of group */
- struct in_addr imr_address; /* local IP address of interface */
- int imr_ifindex; /* Interface index */
-};
-
-struct ip_mreq_source {
- __be32 imr_multiaddr;
- __be32 imr_interface;
- __be32 imr_sourceaddr;
-};
-
-struct ip_msfilter {
- __be32 imsf_multiaddr;
- __be32 imsf_interface;
- __u32 imsf_fmode;
- __u32 imsf_numsrc;
- __be32 imsf_slist[1];
-};
-
-#define IP_MSFILTER_SIZE(numsrc) \
- (sizeof(struct ip_msfilter) - sizeof(__u32) \
- + (numsrc) * sizeof(__u32))
-
-struct group_req {
- __u32 gr_interface; /* interface index */
- struct __kernel_sockaddr_storage gr_group; /* group address */
-};
-
-struct group_source_req {
- __u32 gsr_interface; /* interface index */
- struct __kernel_sockaddr_storage gsr_group; /* group address */
- struct __kernel_sockaddr_storage gsr_source; /* source address */
-};
-
-struct group_filter {
- __u32 gf_interface; /* interface index */
- struct __kernel_sockaddr_storage gf_group; /* multicast address */
- __u32 gf_fmode; /* filter mode */
- __u32 gf_numsrc; /* number of sources */
- struct __kernel_sockaddr_storage gf_slist[1]; /* interface index */
-};
-
-#define GROUP_FILTER_SIZE(numsrc) \
- (sizeof(struct group_filter) - sizeof(struct __kernel_sockaddr_storage) \
- + (numsrc) * sizeof(struct __kernel_sockaddr_storage))
-
-struct in_pktinfo {
- int ipi_ifindex;
- struct in_addr ipi_spec_dst;
- struct in_addr ipi_addr;
-};
-
-/* Structure describing an Internet (IP) socket address. */
-#define __SOCK_SIZE__ 16 /* sizeof(struct sockaddr) */
-struct sockaddr_in {
- __kernel_sa_family_t sin_family; /* Address family */
- __be16 sin_port; /* Port number */
- struct in_addr sin_addr; /* Internet address */
-
- /* Pad to size of `struct sockaddr'. */
- unsigned char __pad[__SOCK_SIZE__ - sizeof(short int) -
- sizeof(unsigned short int) - sizeof(struct in_addr)];
-};
-#define sin_zero __pad /* for BSD UNIX comp. -FvK */
-
-
-/*
- * Definitions of the bits in an Internet address integer.
- * On subnets, host and network parts are found according
- * to the subnet mask, not these masks.
- */
-#define IN_CLASSA(a) ((((long int) (a)) & 0x80000000) == 0)
-#define IN_CLASSA_NET 0xff000000
-#define IN_CLASSA_NSHIFT 24
-#define IN_CLASSA_HOST (0xffffffff & ~IN_CLASSA_NET)
-#define IN_CLASSA_MAX 128
-
-#define IN_CLASSB(a) ((((long int) (a)) & 0xc0000000) == 0x80000000)
-#define IN_CLASSB_NET 0xffff0000
-#define IN_CLASSB_NSHIFT 16
-#define IN_CLASSB_HOST (0xffffffff & ~IN_CLASSB_NET)
-#define IN_CLASSB_MAX 65536
-
-#define IN_CLASSC(a) ((((long int) (a)) & 0xe0000000) == 0xc0000000)
-#define IN_CLASSC_NET 0xffffff00
-#define IN_CLASSC_NSHIFT 8
-#define IN_CLASSC_HOST (0xffffffff & ~IN_CLASSC_NET)
-
-#define IN_CLASSD(a) ((((long int) (a)) & 0xf0000000) == 0xe0000000)
-#define IN_MULTICAST(a) IN_CLASSD(a)
-#define IN_MULTICAST_NET 0xF0000000
-
-#define IN_EXPERIMENTAL(a) ((((long int) (a)) & 0xf0000000) == 0xf0000000)
-#define IN_BADCLASS(a) IN_EXPERIMENTAL((a))
-
-/* Address to accept any incoming messages. */
-#define INADDR_ANY ((unsigned long int) 0x00000000)
-
-/* Address to send to all hosts. */
-#define INADDR_BROADCAST ((unsigned long int) 0xffffffff)
-
-/* Address indicating an error return. */
-#define INADDR_NONE ((unsigned long int) 0xffffffff)
-
-/* Network number for local host loopback. */
-#define IN_LOOPBACKNET 127
-
-/* Address to loopback in software to local host. */
-#define INADDR_LOOPBACK 0x7f000001 /* 127.0.0.1 */
-#define IN_LOOPBACK(a) ((((long int) (a)) & 0xff000000) == 0x7f000000)
-
-/* Defines for Multicast INADDR */
-#define INADDR_UNSPEC_GROUP 0xe0000000U /* 224.0.0.0 */
-#define INADDR_ALLHOSTS_GROUP 0xe0000001U /* 224.0.0.1 */
-#define INADDR_ALLRTRS_GROUP 0xe0000002U /* 224.0.0.2 */
-#define INADDR_MAX_LOCAL_GROUP 0xe00000ffU /* 224.0.0.255 */
-
-
-/* <asm/byteorder.h> contains the htonl type stuff.. */
-#include <asm/byteorder.h>
-
-#ifdef __KERNEL__
#include <linux/errno.h>
+#include <uapi/linux/in.h>
static inline int proto_ports_offset(int proto)
{
@@ -332,6 +101,4 @@
{
return (addr & htonl(0xfffe0000)) == htonl(0xc6120000);
}
-#endif
-
#endif /* _LINUX_IN_H */
diff --git a/include/linux/in6.h b/include/linux/in6.h
index cba469b..9e2ae26 100644
--- a/include/linux/in6.h
+++ b/include/linux/in6.h
@@ -17,32 +17,11 @@
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
-
#ifndef _LINUX_IN6_H
#define _LINUX_IN6_H
-#include <linux/types.h>
+#include <uapi/linux/in6.h>
-/*
- * IPv6 address structure
- */
-
-struct in6_addr {
- union {
- __u8 u6_addr8[16];
- __be16 u6_addr16[8];
- __be32 u6_addr32[4];
- } in6_u;
-#define s6_addr in6_u.u6_addr8
-#define s6_addr16 in6_u.u6_addr16
-#define s6_addr32 in6_u.u6_addr32
-};
-
-/* IPv6 Wildcard Address (::) and Loopback Address (::1) defined in RFC2553
- * NOTE: Be aware the IN6ADDR_* constants and in6addr_* externals are defined
- * in network byte order, not in host byte order as are the IPv4 equivalents
- */
-#ifdef __KERNEL__
extern const struct in6_addr in6addr_any;
#define IN6ADDR_ANY_INIT { { { 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 } } }
extern const struct in6_addr in6addr_loopback;
@@ -54,238 +33,3 @@
#define IN6ADDR_LINKLOCAL_ALLROUTERS_INIT \
{ { { 0xff,2,0,0,0,0,0,0,0,0,0,0,0,0,0,2 } } }
#endif
-
-struct sockaddr_in6 {
- unsigned short int sin6_family; /* AF_INET6 */
- __be16 sin6_port; /* Transport layer port # */
- __be32 sin6_flowinfo; /* IPv6 flow information */
- struct in6_addr sin6_addr; /* IPv6 address */
- __u32 sin6_scope_id; /* scope id (new in RFC2553) */
-};
-
-struct ipv6_mreq {
- /* IPv6 multicast address of group */
- struct in6_addr ipv6mr_multiaddr;
-
- /* local IPv6 address of interface */
- int ipv6mr_ifindex;
-};
-
-#define ipv6mr_acaddr ipv6mr_multiaddr
-
-struct in6_flowlabel_req {
- struct in6_addr flr_dst;
- __be32 flr_label;
- __u8 flr_action;
- __u8 flr_share;
- __u16 flr_flags;
- __u16 flr_expires;
- __u16 flr_linger;
- __u32 __flr_pad;
- /* Options in format of IPV6_PKTOPTIONS */
-};
-
-#define IPV6_FL_A_GET 0
-#define IPV6_FL_A_PUT 1
-#define IPV6_FL_A_RENEW 2
-
-#define IPV6_FL_F_CREATE 1
-#define IPV6_FL_F_EXCL 2
-
-#define IPV6_FL_S_NONE 0
-#define IPV6_FL_S_EXCL 1
-#define IPV6_FL_S_PROCESS 2
-#define IPV6_FL_S_USER 3
-#define IPV6_FL_S_ANY 255
-
-
-/*
- * Bitmask constant declarations to help applications select out the
- * flow label and priority fields.
- *
- * Note that this are in host byte order while the flowinfo field of
- * sockaddr_in6 is in network byte order.
- */
-
-#define IPV6_FLOWINFO_FLOWLABEL 0x000fffff
-#define IPV6_FLOWINFO_PRIORITY 0x0ff00000
-
-/* These definitions are obsolete */
-#define IPV6_PRIORITY_UNCHARACTERIZED 0x0000
-#define IPV6_PRIORITY_FILLER 0x0100
-#define IPV6_PRIORITY_UNATTENDED 0x0200
-#define IPV6_PRIORITY_RESERVED1 0x0300
-#define IPV6_PRIORITY_BULK 0x0400
-#define IPV6_PRIORITY_RESERVED2 0x0500
-#define IPV6_PRIORITY_INTERACTIVE 0x0600
-#define IPV6_PRIORITY_CONTROL 0x0700
-#define IPV6_PRIORITY_8 0x0800
-#define IPV6_PRIORITY_9 0x0900
-#define IPV6_PRIORITY_10 0x0a00
-#define IPV6_PRIORITY_11 0x0b00
-#define IPV6_PRIORITY_12 0x0c00
-#define IPV6_PRIORITY_13 0x0d00
-#define IPV6_PRIORITY_14 0x0e00
-#define IPV6_PRIORITY_15 0x0f00
-
-/*
- * IPV6 extension headers
- */
-#define IPPROTO_HOPOPTS 0 /* IPv6 hop-by-hop options */
-#define IPPROTO_ROUTING 43 /* IPv6 routing header */
-#define IPPROTO_FRAGMENT 44 /* IPv6 fragmentation header */
-#define IPPROTO_ICMPV6 58 /* ICMPv6 */
-#define IPPROTO_NONE 59 /* IPv6 no next header */
-#define IPPROTO_DSTOPTS 60 /* IPv6 destination options */
-#define IPPROTO_MH 135 /* IPv6 mobility header */
-
-/*
- * IPv6 TLV options.
- */
-#define IPV6_TLV_PAD1 0
-#define IPV6_TLV_PADN 1
-#define IPV6_TLV_ROUTERALERT 5
-#define IPV6_TLV_JUMBO 194
-#define IPV6_TLV_HAO 201 /* home address option */
-
-/*
- * IPV6 socket options
- */
-
-#define IPV6_ADDRFORM 1
-#define IPV6_2292PKTINFO 2
-#define IPV6_2292HOPOPTS 3
-#define IPV6_2292DSTOPTS 4
-#define IPV6_2292RTHDR 5
-#define IPV6_2292PKTOPTIONS 6
-#define IPV6_CHECKSUM 7
-#define IPV6_2292HOPLIMIT 8
-#define IPV6_NEXTHOP 9
-#define IPV6_AUTHHDR 10 /* obsolete */
-#define IPV6_FLOWINFO 11
-
-#define IPV6_UNICAST_HOPS 16
-#define IPV6_MULTICAST_IF 17
-#define IPV6_MULTICAST_HOPS 18
-#define IPV6_MULTICAST_LOOP 19
-#define IPV6_ADD_MEMBERSHIP 20
-#define IPV6_DROP_MEMBERSHIP 21
-#define IPV6_ROUTER_ALERT 22
-#define IPV6_MTU_DISCOVER 23
-#define IPV6_MTU 24
-#define IPV6_RECVERR 25
-#define IPV6_V6ONLY 26
-#define IPV6_JOIN_ANYCAST 27
-#define IPV6_LEAVE_ANYCAST 28
-
-/* IPV6_MTU_DISCOVER values */
-#define IPV6_PMTUDISC_DONT 0
-#define IPV6_PMTUDISC_WANT 1
-#define IPV6_PMTUDISC_DO 2
-#define IPV6_PMTUDISC_PROBE 3
-
-/* Flowlabel */
-#define IPV6_FLOWLABEL_MGR 32
-#define IPV6_FLOWINFO_SEND 33
-
-#define IPV6_IPSEC_POLICY 34
-#define IPV6_XFRM_POLICY 35
-
-/*
- * Multicast:
- * Following socket options are shared between IPv4 and IPv6.
- *
- * MCAST_JOIN_GROUP 42
- * MCAST_BLOCK_SOURCE 43
- * MCAST_UNBLOCK_SOURCE 44
- * MCAST_LEAVE_GROUP 45
- * MCAST_JOIN_SOURCE_GROUP 46
- * MCAST_LEAVE_SOURCE_GROUP 47
- * MCAST_MSFILTER 48
- */
-
-/*
- * Advanced API (RFC3542) (1)
- *
- * Note: IPV6_RECVRTHDRDSTOPTS does not exist. see net/ipv6/datagram.c.
- */
-
-#define IPV6_RECVPKTINFO 49
-#define IPV6_PKTINFO 50
-#define IPV6_RECVHOPLIMIT 51
-#define IPV6_HOPLIMIT 52
-#define IPV6_RECVHOPOPTS 53
-#define IPV6_HOPOPTS 54
-#define IPV6_RTHDRDSTOPTS 55
-#define IPV6_RECVRTHDR 56
-#define IPV6_RTHDR 57
-#define IPV6_RECVDSTOPTS 58
-#define IPV6_DSTOPTS 59
-#define IPV6_RECVPATHMTU 60
-#define IPV6_PATHMTU 61
-#define IPV6_DONTFRAG 62
-#if 0 /* not yet */
-#define IPV6_USE_MIN_MTU 63
-#endif
-
-/*
- * Netfilter (1)
- *
- * Following socket options are used in ip6_tables;
- * see include/linux/netfilter_ipv6/ip6_tables.h.
- *
- * IP6T_SO_SET_REPLACE / IP6T_SO_GET_INFO 64
- * IP6T_SO_SET_ADD_COUNTERS / IP6T_SO_GET_ENTRIES 65
- */
-
-/*
- * Advanced API (RFC3542) (2)
- */
-#define IPV6_RECVTCLASS 66
-#define IPV6_TCLASS 67
-
-/*
- * Netfilter (2)
- *
- * Following socket options are used in ip6_tables;
- * see include/linux/netfilter_ipv6/ip6_tables.h.
- *
- * IP6T_SO_GET_REVISION_MATCH 68
- * IP6T_SO_GET_REVISION_TARGET 69
- */
-
-/* RFC5014: Source address selection */
-#define IPV6_ADDR_PREFERENCES 72
-
-#define IPV6_PREFER_SRC_TMP 0x0001
-#define IPV6_PREFER_SRC_PUBLIC 0x0002
-#define IPV6_PREFER_SRC_PUBTMP_DEFAULT 0x0100
-#define IPV6_PREFER_SRC_COA 0x0004
-#define IPV6_PREFER_SRC_HOME 0x0400
-#define IPV6_PREFER_SRC_CGA 0x0008
-#define IPV6_PREFER_SRC_NONCGA 0x0800
-
-/* RFC5082: Generalized Ttl Security Mechanism */
-#define IPV6_MINHOPCOUNT 73
-
-#define IPV6_ORIGDSTADDR 74
-#define IPV6_RECVORIGDSTADDR IPV6_ORIGDSTADDR
-#define IPV6_TRANSPARENT 75
-#define IPV6_UNICAST_IF 76
-
-/*
- * Multicast Routing:
- * see include/linux/mroute6.h.
- *
- * MRT6_INIT 200
- * MRT6_DONE 201
- * MRT6_ADD_MIF 202
- * MRT6_DEL_MIF 203
- * MRT6_ADD_MFC 204
- * MRT6_DEL_MFC 205
- * MRT6_VERSION 206
- * MRT6_ASSERT 207
- * MRT6_PIM 208
- * (reserved) 209
- */
-#endif
diff --git a/include/linux/inet_diag.h b/include/linux/inet_diag.h
index e788c18..46da024 100644
--- a/include/linux/inet_diag.h
+++ b/include/linux/inet_diag.h
@@ -1,138 +1,8 @@
#ifndef _INET_DIAG_H_
#define _INET_DIAG_H_ 1
-#include <linux/types.h>
+#include <uapi/linux/inet_diag.h>
-/* Just some random number */
-#define TCPDIAG_GETSOCK 18
-#define DCCPDIAG_GETSOCK 19
-
-#define INET_DIAG_GETSOCK_MAX 24
-
-/* Socket identity */
-struct inet_diag_sockid {
- __be16 idiag_sport;
- __be16 idiag_dport;
- __be32 idiag_src[4];
- __be32 idiag_dst[4];
- __u32 idiag_if;
- __u32 idiag_cookie[2];
-#define INET_DIAG_NOCOOKIE (~0U)
-};
-
-/* Request structure */
-
-struct inet_diag_req {
- __u8 idiag_family; /* Family of addresses. */
- __u8 idiag_src_len;
- __u8 idiag_dst_len;
- __u8 idiag_ext; /* Query extended information */
-
- struct inet_diag_sockid id;
-
- __u32 idiag_states; /* States to dump */
- __u32 idiag_dbs; /* Tables to dump (NI) */
-};
-
-struct inet_diag_req_v2 {
- __u8 sdiag_family;
- __u8 sdiag_protocol;
- __u8 idiag_ext;
- __u8 pad;
- __u32 idiag_states;
- struct inet_diag_sockid id;
-};
-
-enum {
- INET_DIAG_REQ_NONE,
- INET_DIAG_REQ_BYTECODE,
-};
-
-#define INET_DIAG_REQ_MAX INET_DIAG_REQ_BYTECODE
-
-/* Bytecode is sequence of 4 byte commands followed by variable arguments.
- * All the commands identified by "code" are conditional jumps forward:
- * to offset cc+"yes" or to offset cc+"no". "yes" is supposed to be
- * length of the command and its arguments.
- */
-
-struct inet_diag_bc_op {
- unsigned char code;
- unsigned char yes;
- unsigned short no;
-};
-
-enum {
- INET_DIAG_BC_NOP,
- INET_DIAG_BC_JMP,
- INET_DIAG_BC_S_GE,
- INET_DIAG_BC_S_LE,
- INET_DIAG_BC_D_GE,
- INET_DIAG_BC_D_LE,
- INET_DIAG_BC_AUTO,
- INET_DIAG_BC_S_COND,
- INET_DIAG_BC_D_COND,
-};
-
-struct inet_diag_hostcond {
- __u8 family;
- __u8 prefix_len;
- int port;
- __be32 addr[0];
-};
-
-/* Base info structure. It contains socket identity (addrs/ports/cookie)
- * and, alas, the information shown by netstat. */
-struct inet_diag_msg {
- __u8 idiag_family;
- __u8 idiag_state;
- __u8 idiag_timer;
- __u8 idiag_retrans;
-
- struct inet_diag_sockid id;
-
- __u32 idiag_expires;
- __u32 idiag_rqueue;
- __u32 idiag_wqueue;
- __u32 idiag_uid;
- __u32 idiag_inode;
-};
-
-/* Extensions */
-
-enum {
- INET_DIAG_NONE,
- INET_DIAG_MEMINFO,
- INET_DIAG_INFO,
- INET_DIAG_VEGASINFO,
- INET_DIAG_CONG,
- INET_DIAG_TOS,
- INET_DIAG_TCLASS,
- INET_DIAG_SKMEMINFO,
-};
-
-#define INET_DIAG_MAX INET_DIAG_SKMEMINFO
-
-
-/* INET_DIAG_MEM */
-
-struct inet_diag_meminfo {
- __u32 idiag_rmem;
- __u32 idiag_wmem;
- __u32 idiag_fmem;
- __u32 idiag_tmem;
-};
-
-/* INET_DIAG_VEGASINFO */
-
-struct tcpvegas_info {
- __u32 tcpv_enabled;
- __u32 tcpv_rttcnt;
- __u32 tcpv_rtt;
- __u32 tcpv_minrtt;
-};
-
-#ifdef __KERNEL__
struct sock;
struct inet_hashinfo;
struct nlattr;
@@ -173,6 +43,4 @@
extern int inet_diag_register(const struct inet_diag_handler *handler);
extern void inet_diag_unregister(const struct inet_diag_handler *handler);
-#endif /* __KERNEL__ */
-
#endif /* _INET_DIAG_H_ */
diff --git a/include/linux/inotify.h b/include/linux/inotify.h
index d33041e..23aede0 100644
--- a/include/linux/inotify.h
+++ b/include/linux/inotify.h
@@ -3,75 +3,12 @@
*
* Copyright (C) 2005 John McCutchan
*/
-
#ifndef _LINUX_INOTIFY_H
#define _LINUX_INOTIFY_H
-/* For O_CLOEXEC and O_NONBLOCK */
-#include <linux/fcntl.h>
-#include <linux/types.h>
-
-/*
- * struct inotify_event - structure read from the inotify device for each event
- *
- * When you are watching a directory, you will receive the filename for events
- * such as IN_CREATE, IN_DELETE, IN_OPEN, IN_CLOSE, ..., relative to the wd.
- */
-struct inotify_event {
- __s32 wd; /* watch descriptor */
- __u32 mask; /* watch mask */
- __u32 cookie; /* cookie to synchronize two events */
- __u32 len; /* length (including nulls) of name */
- char name[0]; /* stub for possible name */
-};
-
-/* the following are legal, implemented events that user-space can watch for */
-#define IN_ACCESS 0x00000001 /* File was accessed */
-#define IN_MODIFY 0x00000002 /* File was modified */
-#define IN_ATTRIB 0x00000004 /* Metadata changed */
-#define IN_CLOSE_WRITE 0x00000008 /* Writtable file was closed */
-#define IN_CLOSE_NOWRITE 0x00000010 /* Unwrittable file closed */
-#define IN_OPEN 0x00000020 /* File was opened */
-#define IN_MOVED_FROM 0x00000040 /* File was moved from X */
-#define IN_MOVED_TO 0x00000080 /* File was moved to Y */
-#define IN_CREATE 0x00000100 /* Subfile was created */
-#define IN_DELETE 0x00000200 /* Subfile was deleted */
-#define IN_DELETE_SELF 0x00000400 /* Self was deleted */
-#define IN_MOVE_SELF 0x00000800 /* Self was moved */
-
-/* the following are legal events. they are sent as needed to any watch */
-#define IN_UNMOUNT 0x00002000 /* Backing fs was unmounted */
-#define IN_Q_OVERFLOW 0x00004000 /* Event queued overflowed */
-#define IN_IGNORED 0x00008000 /* File was ignored */
-
-/* helper events */
-#define IN_CLOSE (IN_CLOSE_WRITE | IN_CLOSE_NOWRITE) /* close */
-#define IN_MOVE (IN_MOVED_FROM | IN_MOVED_TO) /* moves */
-
-/* special flags */
-#define IN_ONLYDIR 0x01000000 /* only watch the path if it is a directory */
-#define IN_DONT_FOLLOW 0x02000000 /* don't follow a sym link */
-#define IN_EXCL_UNLINK 0x04000000 /* exclude events on unlinked objects */
-#define IN_MASK_ADD 0x20000000 /* add to the mask of an already existing watch */
-#define IN_ISDIR 0x40000000 /* event occurred against dir */
-#define IN_ONESHOT 0x80000000 /* only send event once */
-
-/*
- * All of the events - we build the list by hand so that we can add flags in
- * the future and not break backward compatibility. Apps will get only the
- * events that they originally wanted. Be sure to add new events here!
- */
-#define IN_ALL_EVENTS (IN_ACCESS | IN_MODIFY | IN_ATTRIB | IN_CLOSE_WRITE | \
- IN_CLOSE_NOWRITE | IN_OPEN | IN_MOVED_FROM | \
- IN_MOVED_TO | IN_DELETE | IN_CREATE | IN_DELETE_SELF | \
- IN_MOVE_SELF)
-
-/* Flags for sys_inotify_init1. */
-#define IN_CLOEXEC O_CLOEXEC
-#define IN_NONBLOCK O_NONBLOCK
-
-#ifdef __KERNEL__
#include <linux/sysctl.h>
+#include <uapi/linux/inotify.h>
+
extern struct ctl_table inotify_table[]; /* for sysctl */
#define ALL_INOTIFY_BITS (IN_ACCESS | IN_MODIFY | IN_ATTRIB | IN_CLOSE_WRITE | \
@@ -82,6 +19,4 @@
IN_DONT_FOLLOW | IN_EXCL_UNLINK | IN_MASK_ADD | \
IN_ISDIR | IN_ONESHOT)
-#endif
-
#endif /* _LINUX_INOTIFY_H */
diff --git a/include/linux/input.h b/include/linux/input.h
index 15464ba..cab994b 100644
--- a/include/linux/input.h
+++ b/include/linux/input.h
@@ -1,6 +1,3 @@
-#ifndef _INPUT_H
-#define _INPUT_H
-
/*
* Copyright (c) 1999-2002 Vojtech Pavlik
*
@@ -8,1156 +5,15 @@
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*/
+#ifndef _INPUT_H
+#define _INPUT_H
-#ifdef __KERNEL__
#include <linux/time.h>
#include <linux/list.h>
-#else
-#include <sys/time.h>
-#include <sys/ioctl.h>
-#include <sys/types.h>
-#include <linux/types.h>
-#endif
-
-/*
- * The event structure itself
- */
-
-struct input_event {
- struct timeval time;
- __u16 type;
- __u16 code;
- __s32 value;
-};
-
-/*
- * Protocol version.
- */
-
-#define EV_VERSION 0x010001
-
-/*
- * IOCTLs (0x00 - 0x7f)
- */
-
-struct input_id {
- __u16 bustype;
- __u16 vendor;
- __u16 product;
- __u16 version;
-};
-
-/**
- * struct input_absinfo - used by EVIOCGABS/EVIOCSABS ioctls
- * @value: latest reported value for the axis.
- * @minimum: specifies minimum value for the axis.
- * @maximum: specifies maximum value for the axis.
- * @fuzz: specifies fuzz value that is used to filter noise from
- * the event stream.
- * @flat: values that are within this value will be discarded by
- * joydev interface and reported as 0 instead.
- * @resolution: specifies resolution for the values reported for
- * the axis.
- *
- * Note that input core does not clamp reported values to the
- * [minimum, maximum] limits, such task is left to userspace.
- *
- * Resolution for main axes (ABS_X, ABS_Y, ABS_Z) is reported in
- * units per millimeter (units/mm), resolution for rotational axes
- * (ABS_RX, ABS_RY, ABS_RZ) is reported in units per radian.
- */
-struct input_absinfo {
- __s32 value;
- __s32 minimum;
- __s32 maximum;
- __s32 fuzz;
- __s32 flat;
- __s32 resolution;
-};
-
-/**
- * struct input_keymap_entry - used by EVIOCGKEYCODE/EVIOCSKEYCODE ioctls
- * @scancode: scancode represented in machine-endian form.
- * @len: length of the scancode that resides in @scancode buffer.
- * @index: index in the keymap, may be used instead of scancode
- * @flags: allows to specify how kernel should handle the request. For
- * example, setting INPUT_KEYMAP_BY_INDEX flag indicates that kernel
- * should perform lookup in keymap by @index instead of @scancode
- * @keycode: key code assigned to this scancode
- *
- * The structure is used to retrieve and modify keymap data. Users have
- * option of performing lookup either by @scancode itself or by @index
- * in keymap entry. EVIOCGKEYCODE will also return scancode or index
- * (depending on which element was used to perform lookup).
- */
-struct input_keymap_entry {
-#define INPUT_KEYMAP_BY_INDEX (1 << 0)
- __u8 flags;
- __u8 len;
- __u16 index;
- __u32 keycode;
- __u8 scancode[32];
-};
-
-#define EVIOCGVERSION _IOR('E', 0x01, int) /* get driver version */
-#define EVIOCGID _IOR('E', 0x02, struct input_id) /* get device ID */
-#define EVIOCGREP _IOR('E', 0x03, unsigned int[2]) /* get repeat settings */
-#define EVIOCSREP _IOW('E', 0x03, unsigned int[2]) /* set repeat settings */
-
-#define EVIOCGKEYCODE _IOR('E', 0x04, unsigned int[2]) /* get keycode */
-#define EVIOCGKEYCODE_V2 _IOR('E', 0x04, struct input_keymap_entry)
-#define EVIOCSKEYCODE _IOW('E', 0x04, unsigned int[2]) /* set keycode */
-#define EVIOCSKEYCODE_V2 _IOW('E', 0x04, struct input_keymap_entry)
-
-#define EVIOCGNAME(len) _IOC(_IOC_READ, 'E', 0x06, len) /* get device name */
-#define EVIOCGPHYS(len) _IOC(_IOC_READ, 'E', 0x07, len) /* get physical location */
-#define EVIOCGUNIQ(len) _IOC(_IOC_READ, 'E', 0x08, len) /* get unique identifier */
-#define EVIOCGPROP(len) _IOC(_IOC_READ, 'E', 0x09, len) /* get device properties */
-
-/**
- * EVIOCGMTSLOTS(len) - get MT slot values
- * @len: size of the data buffer in bytes
- *
- * The ioctl buffer argument should be binary equivalent to
- *
- * struct input_mt_request_layout {
- * __u32 code;
- * __s32 values[num_slots];
- * };
- *
- * where num_slots is the (arbitrary) number of MT slots to extract.
- *
- * The ioctl size argument (len) is the size of the buffer, which
- * should satisfy len = (num_slots + 1) * sizeof(__s32). If len is
- * too small to fit all available slots, the first num_slots are
- * returned.
- *
- * Before the call, code is set to the wanted ABS_MT event type. On
- * return, values[] is filled with the slot values for the specified
- * ABS_MT code.
- *
- * If the request code is not an ABS_MT value, -EINVAL is returned.
- */
-#define EVIOCGMTSLOTS(len) _IOC(_IOC_READ, 'E', 0x0a, len)
-
-#define EVIOCGKEY(len) _IOC(_IOC_READ, 'E', 0x18, len) /* get global key state */
-#define EVIOCGLED(len) _IOC(_IOC_READ, 'E', 0x19, len) /* get all LEDs */
-#define EVIOCGSND(len) _IOC(_IOC_READ, 'E', 0x1a, len) /* get all sounds status */
-#define EVIOCGSW(len) _IOC(_IOC_READ, 'E', 0x1b, len) /* get all switch states */
-
-#define EVIOCGBIT(ev,len) _IOC(_IOC_READ, 'E', 0x20 + (ev), len) /* get event bits */
-#define EVIOCGABS(abs) _IOR('E', 0x40 + (abs), struct input_absinfo) /* get abs value/limits */
-#define EVIOCSABS(abs) _IOW('E', 0xc0 + (abs), struct input_absinfo) /* set abs value/limits */
-
-#define EVIOCSFF _IOC(_IOC_WRITE, 'E', 0x80, sizeof(struct ff_effect)) /* send a force effect to a force feedback device */
-#define EVIOCRMFF _IOW('E', 0x81, int) /* Erase a force effect */
-#define EVIOCGEFFECTS _IOR('E', 0x84, int) /* Report number of effects playable at the same time */
-
-#define EVIOCGRAB _IOW('E', 0x90, int) /* Grab/Release device */
-
-#define EVIOCSCLOCKID _IOW('E', 0xa0, int) /* Set clockid to be used for timestamps */
-
-/*
- * Device properties and quirks
- */
-
-#define INPUT_PROP_POINTER 0x00 /* needs a pointer */
-#define INPUT_PROP_DIRECT 0x01 /* direct input devices */
-#define INPUT_PROP_BUTTONPAD 0x02 /* has button(s) under pad */
-#define INPUT_PROP_SEMI_MT 0x03 /* touch rectangle only */
-
-#define INPUT_PROP_MAX 0x1f
-#define INPUT_PROP_CNT (INPUT_PROP_MAX + 1)
-
-/*
- * Event types
- */
-
-#define EV_SYN 0x00
-#define EV_KEY 0x01
-#define EV_REL 0x02
-#define EV_ABS 0x03
-#define EV_MSC 0x04
-#define EV_SW 0x05
-#define EV_LED 0x11
-#define EV_SND 0x12
-#define EV_REP 0x14
-#define EV_FF 0x15
-#define EV_PWR 0x16
-#define EV_FF_STATUS 0x17
-#define EV_MAX 0x1f
-#define EV_CNT (EV_MAX+1)
-
-/*
- * Synchronization events.
- */
-
-#define SYN_REPORT 0
-#define SYN_CONFIG 1
-#define SYN_MT_REPORT 2
-#define SYN_DROPPED 3
-
-/*
- * Keys and buttons
- *
- * Most of the keys/buttons are modeled after USB HUT 1.12
- * (see http://www.usb.org/developers/hidpage).
- * Abbreviations in the comments:
- * AC - Application Control
- * AL - Application Launch Button
- * SC - System Control
- */
-
-#define KEY_RESERVED 0
-#define KEY_ESC 1
-#define KEY_1 2
-#define KEY_2 3
-#define KEY_3 4
-#define KEY_4 5
-#define KEY_5 6
-#define KEY_6 7
-#define KEY_7 8
-#define KEY_8 9
-#define KEY_9 10
-#define KEY_0 11
-#define KEY_MINUS 12
-#define KEY_EQUAL 13
-#define KEY_BACKSPACE 14
-#define KEY_TAB 15
-#define KEY_Q 16
-#define KEY_W 17
-#define KEY_E 18
-#define KEY_R 19
-#define KEY_T 20
-#define KEY_Y 21
-#define KEY_U 22
-#define KEY_I 23
-#define KEY_O 24
-#define KEY_P 25
-#define KEY_LEFTBRACE 26
-#define KEY_RIGHTBRACE 27
-#define KEY_ENTER 28
-#define KEY_LEFTCTRL 29
-#define KEY_A 30
-#define KEY_S 31
-#define KEY_D 32
-#define KEY_F 33
-#define KEY_G 34
-#define KEY_H 35
-#define KEY_J 36
-#define KEY_K 37
-#define KEY_L 38
-#define KEY_SEMICOLON 39
-#define KEY_APOSTROPHE 40
-#define KEY_GRAVE 41
-#define KEY_LEFTSHIFT 42
-#define KEY_BACKSLASH 43
-#define KEY_Z 44
-#define KEY_X 45
-#define KEY_C 46
-#define KEY_V 47
-#define KEY_B 48
-#define KEY_N 49
-#define KEY_M 50
-#define KEY_COMMA 51
-#define KEY_DOT 52
-#define KEY_SLASH 53
-#define KEY_RIGHTSHIFT 54
-#define KEY_KPASTERISK 55
-#define KEY_LEFTALT 56
-#define KEY_SPACE 57
-#define KEY_CAPSLOCK 58
-#define KEY_F1 59
-#define KEY_F2 60
-#define KEY_F3 61
-#define KEY_F4 62
-#define KEY_F5 63
-#define KEY_F6 64
-#define KEY_F7 65
-#define KEY_F8 66
-#define KEY_F9 67
-#define KEY_F10 68
-#define KEY_NUMLOCK 69
-#define KEY_SCROLLLOCK 70
-#define KEY_KP7 71
-#define KEY_KP8 72
-#define KEY_KP9 73
-#define KEY_KPMINUS 74
-#define KEY_KP4 75
-#define KEY_KP5 76
-#define KEY_KP6 77
-#define KEY_KPPLUS 78
-#define KEY_KP1 79
-#define KEY_KP2 80
-#define KEY_KP3 81
-#define KEY_KP0 82
-#define KEY_KPDOT 83
-
-#define KEY_ZENKAKUHANKAKU 85
-#define KEY_102ND 86
-#define KEY_F11 87
-#define KEY_F12 88
-#define KEY_RO 89
-#define KEY_KATAKANA 90
-#define KEY_HIRAGANA 91
-#define KEY_HENKAN 92
-#define KEY_KATAKANAHIRAGANA 93
-#define KEY_MUHENKAN 94
-#define KEY_KPJPCOMMA 95
-#define KEY_KPENTER 96
-#define KEY_RIGHTCTRL 97
-#define KEY_KPSLASH 98
-#define KEY_SYSRQ 99
-#define KEY_RIGHTALT 100
-#define KEY_LINEFEED 101
-#define KEY_HOME 102
-#define KEY_UP 103
-#define KEY_PAGEUP 104
-#define KEY_LEFT 105
-#define KEY_RIGHT 106
-#define KEY_END 107
-#define KEY_DOWN 108
-#define KEY_PAGEDOWN 109
-#define KEY_INSERT 110
-#define KEY_DELETE 111
-#define KEY_MACRO 112
-#define KEY_MUTE 113
-#define KEY_VOLUMEDOWN 114
-#define KEY_VOLUMEUP 115
-#define KEY_POWER 116 /* SC System Power Down */
-#define KEY_KPEQUAL 117
-#define KEY_KPPLUSMINUS 118
-#define KEY_PAUSE 119
-#define KEY_SCALE 120 /* AL Compiz Scale (Expose) */
-
-#define KEY_KPCOMMA 121
-#define KEY_HANGEUL 122
-#define KEY_HANGUEL KEY_HANGEUL
-#define KEY_HANJA 123
-#define KEY_YEN 124
-#define KEY_LEFTMETA 125
-#define KEY_RIGHTMETA 126
-#define KEY_COMPOSE 127
-
-#define KEY_STOP 128 /* AC Stop */
-#define KEY_AGAIN 129
-#define KEY_PROPS 130 /* AC Properties */
-#define KEY_UNDO 131 /* AC Undo */
-#define KEY_FRONT 132
-#define KEY_COPY 133 /* AC Copy */
-#define KEY_OPEN 134 /* AC Open */
-#define KEY_PASTE 135 /* AC Paste */
-#define KEY_FIND 136 /* AC Search */
-#define KEY_CUT 137 /* AC Cut */
-#define KEY_HELP 138 /* AL Integrated Help Center */
-#define KEY_MENU 139 /* Menu (show menu) */
-#define KEY_CALC 140 /* AL Calculator */
-#define KEY_SETUP 141
-#define KEY_SLEEP 142 /* SC System Sleep */
-#define KEY_WAKEUP 143 /* System Wake Up */
-#define KEY_FILE 144 /* AL Local Machine Browser */
-#define KEY_SENDFILE 145
-#define KEY_DELETEFILE 146
-#define KEY_XFER 147
-#define KEY_PROG1 148
-#define KEY_PROG2 149
-#define KEY_WWW 150 /* AL Internet Browser */
-#define KEY_MSDOS 151
-#define KEY_COFFEE 152 /* AL Terminal Lock/Screensaver */
-#define KEY_SCREENLOCK KEY_COFFEE
-#define KEY_DIRECTION 153
-#define KEY_CYCLEWINDOWS 154
-#define KEY_MAIL 155
-#define KEY_BOOKMARKS 156 /* AC Bookmarks */
-#define KEY_COMPUTER 157
-#define KEY_BACK 158 /* AC Back */
-#define KEY_FORWARD 159 /* AC Forward */
-#define KEY_CLOSECD 160
-#define KEY_EJECTCD 161
-#define KEY_EJECTCLOSECD 162
-#define KEY_NEXTSONG 163
-#define KEY_PLAYPAUSE 164
-#define KEY_PREVIOUSSONG 165
-#define KEY_STOPCD 166
-#define KEY_RECORD 167
-#define KEY_REWIND 168
-#define KEY_PHONE 169 /* Media Select Telephone */
-#define KEY_ISO 170
-#define KEY_CONFIG 171 /* AL Consumer Control Configuration */
-#define KEY_HOMEPAGE 172 /* AC Home */
-#define KEY_REFRESH 173 /* AC Refresh */
-#define KEY_EXIT 174 /* AC Exit */
-#define KEY_MOVE 175
-#define KEY_EDIT 176
-#define KEY_SCROLLUP 177
-#define KEY_SCROLLDOWN 178
-#define KEY_KPLEFTPAREN 179
-#define KEY_KPRIGHTPAREN 180
-#define KEY_NEW 181 /* AC New */
-#define KEY_REDO 182 /* AC Redo/Repeat */
-
-#define KEY_F13 183
-#define KEY_F14 184
-#define KEY_F15 185
-#define KEY_F16 186
-#define KEY_F17 187
-#define KEY_F18 188
-#define KEY_F19 189
-#define KEY_F20 190
-#define KEY_F21 191
-#define KEY_F22 192
-#define KEY_F23 193
-#define KEY_F24 194
-
-#define KEY_PLAYCD 200
-#define KEY_PAUSECD 201
-#define KEY_PROG3 202
-#define KEY_PROG4 203
-#define KEY_DASHBOARD 204 /* AL Dashboard */
-#define KEY_SUSPEND 205
-#define KEY_CLOSE 206 /* AC Close */
-#define KEY_PLAY 207
-#define KEY_FASTFORWARD 208
-#define KEY_BASSBOOST 209
-#define KEY_PRINT 210 /* AC Print */
-#define KEY_HP 211
-#define KEY_CAMERA 212
-#define KEY_SOUND 213
-#define KEY_QUESTION 214
-#define KEY_EMAIL 215
-#define KEY_CHAT 216
-#define KEY_SEARCH 217
-#define KEY_CONNECT 218
-#define KEY_FINANCE 219 /* AL Checkbook/Finance */
-#define KEY_SPORT 220
-#define KEY_SHOP 221
-#define KEY_ALTERASE 222
-#define KEY_CANCEL 223 /* AC Cancel */
-#define KEY_BRIGHTNESSDOWN 224
-#define KEY_BRIGHTNESSUP 225
-#define KEY_MEDIA 226
-
-#define KEY_SWITCHVIDEOMODE 227 /* Cycle between available video
- outputs (Monitor/LCD/TV-out/etc) */
-#define KEY_KBDILLUMTOGGLE 228
-#define KEY_KBDILLUMDOWN 229
-#define KEY_KBDILLUMUP 230
-
-#define KEY_SEND 231 /* AC Send */
-#define KEY_REPLY 232 /* AC Reply */
-#define KEY_FORWARDMAIL 233 /* AC Forward Msg */
-#define KEY_SAVE 234 /* AC Save */
-#define KEY_DOCUMENTS 235
-
-#define KEY_BATTERY 236
-
-#define KEY_BLUETOOTH 237
-#define KEY_WLAN 238
-#define KEY_UWB 239
-
-#define KEY_UNKNOWN 240
-
-#define KEY_VIDEO_NEXT 241 /* drive next video source */
-#define KEY_VIDEO_PREV 242 /* drive previous video source */
-#define KEY_BRIGHTNESS_CYCLE 243 /* brightness up, after max is min */
-#define KEY_BRIGHTNESS_ZERO 244 /* brightness off, use ambient */
-#define KEY_DISPLAY_OFF 245 /* display device to off state */
-
-#define KEY_WIMAX 246
-#define KEY_RFKILL 247 /* Key that controls all radios */
-
-#define KEY_MICMUTE 248 /* Mute / unmute the microphone */
-
-/* Code 255 is reserved for special needs of AT keyboard driver */
-
-#define BTN_MISC 0x100
-#define BTN_0 0x100
-#define BTN_1 0x101
-#define BTN_2 0x102
-#define BTN_3 0x103
-#define BTN_4 0x104
-#define BTN_5 0x105
-#define BTN_6 0x106
-#define BTN_7 0x107
-#define BTN_8 0x108
-#define BTN_9 0x109
-
-#define BTN_MOUSE 0x110
-#define BTN_LEFT 0x110
-#define BTN_RIGHT 0x111
-#define BTN_MIDDLE 0x112
-#define BTN_SIDE 0x113
-#define BTN_EXTRA 0x114
-#define BTN_FORWARD 0x115
-#define BTN_BACK 0x116
-#define BTN_TASK 0x117
-
-#define BTN_JOYSTICK 0x120
-#define BTN_TRIGGER 0x120
-#define BTN_THUMB 0x121
-#define BTN_THUMB2 0x122
-#define BTN_TOP 0x123
-#define BTN_TOP2 0x124
-#define BTN_PINKIE 0x125
-#define BTN_BASE 0x126
-#define BTN_BASE2 0x127
-#define BTN_BASE3 0x128
-#define BTN_BASE4 0x129
-#define BTN_BASE5 0x12a
-#define BTN_BASE6 0x12b
-#define BTN_DEAD 0x12f
-
-#define BTN_GAMEPAD 0x130
-#define BTN_A 0x130
-#define BTN_B 0x131
-#define BTN_C 0x132
-#define BTN_X 0x133
-#define BTN_Y 0x134
-#define BTN_Z 0x135
-#define BTN_TL 0x136
-#define BTN_TR 0x137
-#define BTN_TL2 0x138
-#define BTN_TR2 0x139
-#define BTN_SELECT 0x13a
-#define BTN_START 0x13b
-#define BTN_MODE 0x13c
-#define BTN_THUMBL 0x13d
-#define BTN_THUMBR 0x13e
-
-#define BTN_DIGI 0x140
-#define BTN_TOOL_PEN 0x140
-#define BTN_TOOL_RUBBER 0x141
-#define BTN_TOOL_BRUSH 0x142
-#define BTN_TOOL_PENCIL 0x143
-#define BTN_TOOL_AIRBRUSH 0x144
-#define BTN_TOOL_FINGER 0x145
-#define BTN_TOOL_MOUSE 0x146
-#define BTN_TOOL_LENS 0x147
-#define BTN_TOOL_QUINTTAP 0x148 /* Five fingers on trackpad */
-#define BTN_TOUCH 0x14a
-#define BTN_STYLUS 0x14b
-#define BTN_STYLUS2 0x14c
-#define BTN_TOOL_DOUBLETAP 0x14d
-#define BTN_TOOL_TRIPLETAP 0x14e
-#define BTN_TOOL_QUADTAP 0x14f /* Four fingers on trackpad */
-
-#define BTN_WHEEL 0x150
-#define BTN_GEAR_DOWN 0x150
-#define BTN_GEAR_UP 0x151
-
-#define KEY_OK 0x160
-#define KEY_SELECT 0x161
-#define KEY_GOTO 0x162
-#define KEY_CLEAR 0x163
-#define KEY_POWER2 0x164
-#define KEY_OPTION 0x165
-#define KEY_INFO 0x166 /* AL OEM Features/Tips/Tutorial */
-#define KEY_TIME 0x167
-#define KEY_VENDOR 0x168
-#define KEY_ARCHIVE 0x169
-#define KEY_PROGRAM 0x16a /* Media Select Program Guide */
-#define KEY_CHANNEL 0x16b
-#define KEY_FAVORITES 0x16c
-#define KEY_EPG 0x16d
-#define KEY_PVR 0x16e /* Media Select Home */
-#define KEY_MHP 0x16f
-#define KEY_LANGUAGE 0x170
-#define KEY_TITLE 0x171
-#define KEY_SUBTITLE 0x172
-#define KEY_ANGLE 0x173
-#define KEY_ZOOM 0x174
-#define KEY_MODE 0x175
-#define KEY_KEYBOARD 0x176
-#define KEY_SCREEN 0x177
-#define KEY_PC 0x178 /* Media Select Computer */
-#define KEY_TV 0x179 /* Media Select TV */
-#define KEY_TV2 0x17a /* Media Select Cable */
-#define KEY_VCR 0x17b /* Media Select VCR */
-#define KEY_VCR2 0x17c /* VCR Plus */
-#define KEY_SAT 0x17d /* Media Select Satellite */
-#define KEY_SAT2 0x17e
-#define KEY_CD 0x17f /* Media Select CD */
-#define KEY_TAPE 0x180 /* Media Select Tape */
-#define KEY_RADIO 0x181
-#define KEY_TUNER 0x182 /* Media Select Tuner */
-#define KEY_PLAYER 0x183
-#define KEY_TEXT 0x184
-#define KEY_DVD 0x185 /* Media Select DVD */
-#define KEY_AUX 0x186
-#define KEY_MP3 0x187
-#define KEY_AUDIO 0x188 /* AL Audio Browser */
-#define KEY_VIDEO 0x189 /* AL Movie Browser */
-#define KEY_DIRECTORY 0x18a
-#define KEY_LIST 0x18b
-#define KEY_MEMO 0x18c /* Media Select Messages */
-#define KEY_CALENDAR 0x18d
-#define KEY_RED 0x18e
-#define KEY_GREEN 0x18f
-#define KEY_YELLOW 0x190
-#define KEY_BLUE 0x191
-#define KEY_CHANNELUP 0x192 /* Channel Increment */
-#define KEY_CHANNELDOWN 0x193 /* Channel Decrement */
-#define KEY_FIRST 0x194
-#define KEY_LAST 0x195 /* Recall Last */
-#define KEY_AB 0x196
-#define KEY_NEXT 0x197
-#define KEY_RESTART 0x198
-#define KEY_SLOW 0x199
-#define KEY_SHUFFLE 0x19a
-#define KEY_BREAK 0x19b
-#define KEY_PREVIOUS 0x19c
-#define KEY_DIGITS 0x19d
-#define KEY_TEEN 0x19e
-#define KEY_TWEN 0x19f
-#define KEY_VIDEOPHONE 0x1a0 /* Media Select Video Phone */
-#define KEY_GAMES 0x1a1 /* Media Select Games */
-#define KEY_ZOOMIN 0x1a2 /* AC Zoom In */
-#define KEY_ZOOMOUT 0x1a3 /* AC Zoom Out */
-#define KEY_ZOOMRESET 0x1a4 /* AC Zoom */
-#define KEY_WORDPROCESSOR 0x1a5 /* AL Word Processor */
-#define KEY_EDITOR 0x1a6 /* AL Text Editor */
-#define KEY_SPREADSHEET 0x1a7 /* AL Spreadsheet */
-#define KEY_GRAPHICSEDITOR 0x1a8 /* AL Graphics Editor */
-#define KEY_PRESENTATION 0x1a9 /* AL Presentation App */
-#define KEY_DATABASE 0x1aa /* AL Database App */
-#define KEY_NEWS 0x1ab /* AL Newsreader */
-#define KEY_VOICEMAIL 0x1ac /* AL Voicemail */
-#define KEY_ADDRESSBOOK 0x1ad /* AL Contacts/Address Book */
-#define KEY_MESSENGER 0x1ae /* AL Instant Messaging */
-#define KEY_DISPLAYTOGGLE 0x1af /* Turn display (LCD) on and off */
-#define KEY_SPELLCHECK 0x1b0 /* AL Spell Check */
-#define KEY_LOGOFF 0x1b1 /* AL Logoff */
-
-#define KEY_DOLLAR 0x1b2
-#define KEY_EURO 0x1b3
-
-#define KEY_FRAMEBACK 0x1b4 /* Consumer - transport controls */
-#define KEY_FRAMEFORWARD 0x1b5
-#define KEY_CONTEXT_MENU 0x1b6 /* GenDesc - system context menu */
-#define KEY_MEDIA_REPEAT 0x1b7 /* Consumer - transport control */
-#define KEY_10CHANNELSUP 0x1b8 /* 10 channels up (10+) */
-#define KEY_10CHANNELSDOWN 0x1b9 /* 10 channels down (10-) */
-#define KEY_IMAGES 0x1ba /* AL Image Browser */
-
-#define KEY_DEL_EOL 0x1c0
-#define KEY_DEL_EOS 0x1c1
-#define KEY_INS_LINE 0x1c2
-#define KEY_DEL_LINE 0x1c3
-
-#define KEY_FN 0x1d0
-#define KEY_FN_ESC 0x1d1
-#define KEY_FN_F1 0x1d2
-#define KEY_FN_F2 0x1d3
-#define KEY_FN_F3 0x1d4
-#define KEY_FN_F4 0x1d5
-#define KEY_FN_F5 0x1d6
-#define KEY_FN_F6 0x1d7
-#define KEY_FN_F7 0x1d8
-#define KEY_FN_F8 0x1d9
-#define KEY_FN_F9 0x1da
-#define KEY_FN_F10 0x1db
-#define KEY_FN_F11 0x1dc
-#define KEY_FN_F12 0x1dd
-#define KEY_FN_1 0x1de
-#define KEY_FN_2 0x1df
-#define KEY_FN_D 0x1e0
-#define KEY_FN_E 0x1e1
-#define KEY_FN_F 0x1e2
-#define KEY_FN_S 0x1e3
-#define KEY_FN_B 0x1e4
-
-#define KEY_BRL_DOT1 0x1f1
-#define KEY_BRL_DOT2 0x1f2
-#define KEY_BRL_DOT3 0x1f3
-#define KEY_BRL_DOT4 0x1f4
-#define KEY_BRL_DOT5 0x1f5
-#define KEY_BRL_DOT6 0x1f6
-#define KEY_BRL_DOT7 0x1f7
-#define KEY_BRL_DOT8 0x1f8
-#define KEY_BRL_DOT9 0x1f9
-#define KEY_BRL_DOT10 0x1fa
-
-#define KEY_NUMERIC_0 0x200 /* used by phones, remote controls, */
-#define KEY_NUMERIC_1 0x201 /* and other keypads */
-#define KEY_NUMERIC_2 0x202
-#define KEY_NUMERIC_3 0x203
-#define KEY_NUMERIC_4 0x204
-#define KEY_NUMERIC_5 0x205
-#define KEY_NUMERIC_6 0x206
-#define KEY_NUMERIC_7 0x207
-#define KEY_NUMERIC_8 0x208
-#define KEY_NUMERIC_9 0x209
-#define KEY_NUMERIC_STAR 0x20a
-#define KEY_NUMERIC_POUND 0x20b
-
-#define KEY_CAMERA_FOCUS 0x210
-#define KEY_WPS_BUTTON 0x211 /* WiFi Protected Setup key */
-
-#define KEY_TOUCHPAD_TOGGLE 0x212 /* Request switch touchpad on or off */
-#define KEY_TOUCHPAD_ON 0x213
-#define KEY_TOUCHPAD_OFF 0x214
-
-#define KEY_CAMERA_ZOOMIN 0x215
-#define KEY_CAMERA_ZOOMOUT 0x216
-#define KEY_CAMERA_UP 0x217
-#define KEY_CAMERA_DOWN 0x218
-#define KEY_CAMERA_LEFT 0x219
-#define KEY_CAMERA_RIGHT 0x21a
-
-#define BTN_TRIGGER_HAPPY 0x2c0
-#define BTN_TRIGGER_HAPPY1 0x2c0
-#define BTN_TRIGGER_HAPPY2 0x2c1
-#define BTN_TRIGGER_HAPPY3 0x2c2
-#define BTN_TRIGGER_HAPPY4 0x2c3
-#define BTN_TRIGGER_HAPPY5 0x2c4
-#define BTN_TRIGGER_HAPPY6 0x2c5
-#define BTN_TRIGGER_HAPPY7 0x2c6
-#define BTN_TRIGGER_HAPPY8 0x2c7
-#define BTN_TRIGGER_HAPPY9 0x2c8
-#define BTN_TRIGGER_HAPPY10 0x2c9
-#define BTN_TRIGGER_HAPPY11 0x2ca
-#define BTN_TRIGGER_HAPPY12 0x2cb
-#define BTN_TRIGGER_HAPPY13 0x2cc
-#define BTN_TRIGGER_HAPPY14 0x2cd
-#define BTN_TRIGGER_HAPPY15 0x2ce
-#define BTN_TRIGGER_HAPPY16 0x2cf
-#define BTN_TRIGGER_HAPPY17 0x2d0
-#define BTN_TRIGGER_HAPPY18 0x2d1
-#define BTN_TRIGGER_HAPPY19 0x2d2
-#define BTN_TRIGGER_HAPPY20 0x2d3
-#define BTN_TRIGGER_HAPPY21 0x2d4
-#define BTN_TRIGGER_HAPPY22 0x2d5
-#define BTN_TRIGGER_HAPPY23 0x2d6
-#define BTN_TRIGGER_HAPPY24 0x2d7
-#define BTN_TRIGGER_HAPPY25 0x2d8
-#define BTN_TRIGGER_HAPPY26 0x2d9
-#define BTN_TRIGGER_HAPPY27 0x2da
-#define BTN_TRIGGER_HAPPY28 0x2db
-#define BTN_TRIGGER_HAPPY29 0x2dc
-#define BTN_TRIGGER_HAPPY30 0x2dd
-#define BTN_TRIGGER_HAPPY31 0x2de
-#define BTN_TRIGGER_HAPPY32 0x2df
-#define BTN_TRIGGER_HAPPY33 0x2e0
-#define BTN_TRIGGER_HAPPY34 0x2e1
-#define BTN_TRIGGER_HAPPY35 0x2e2
-#define BTN_TRIGGER_HAPPY36 0x2e3
-#define BTN_TRIGGER_HAPPY37 0x2e4
-#define BTN_TRIGGER_HAPPY38 0x2e5
-#define BTN_TRIGGER_HAPPY39 0x2e6
-#define BTN_TRIGGER_HAPPY40 0x2e7
-
-/* We avoid low common keys in module aliases so they don't get huge. */
-#define KEY_MIN_INTERESTING KEY_MUTE
-#define KEY_MAX 0x2ff
-#define KEY_CNT (KEY_MAX+1)
-
-/*
- * Relative axes
- */
-
-#define REL_X 0x00
-#define REL_Y 0x01
-#define REL_Z 0x02
-#define REL_RX 0x03
-#define REL_RY 0x04
-#define REL_RZ 0x05
-#define REL_HWHEEL 0x06
-#define REL_DIAL 0x07
-#define REL_WHEEL 0x08
-#define REL_MISC 0x09
-#define REL_MAX 0x0f
-#define REL_CNT (REL_MAX+1)
-
-/*
- * Absolute axes
- */
-
-#define ABS_X 0x00
-#define ABS_Y 0x01
-#define ABS_Z 0x02
-#define ABS_RX 0x03
-#define ABS_RY 0x04
-#define ABS_RZ 0x05
-#define ABS_THROTTLE 0x06
-#define ABS_RUDDER 0x07
-#define ABS_WHEEL 0x08
-#define ABS_GAS 0x09
-#define ABS_BRAKE 0x0a
-#define ABS_HAT0X 0x10
-#define ABS_HAT0Y 0x11
-#define ABS_HAT1X 0x12
-#define ABS_HAT1Y 0x13
-#define ABS_HAT2X 0x14
-#define ABS_HAT2Y 0x15
-#define ABS_HAT3X 0x16
-#define ABS_HAT3Y 0x17
-#define ABS_PRESSURE 0x18
-#define ABS_DISTANCE 0x19
-#define ABS_TILT_X 0x1a
-#define ABS_TILT_Y 0x1b
-#define ABS_TOOL_WIDTH 0x1c
-
-#define ABS_VOLUME 0x20
-
-#define ABS_MISC 0x28
-
-#define ABS_MT_SLOT 0x2f /* MT slot being modified */
-#define ABS_MT_TOUCH_MAJOR 0x30 /* Major axis of touching ellipse */
-#define ABS_MT_TOUCH_MINOR 0x31 /* Minor axis (omit if circular) */
-#define ABS_MT_WIDTH_MAJOR 0x32 /* Major axis of approaching ellipse */
-#define ABS_MT_WIDTH_MINOR 0x33 /* Minor axis (omit if circular) */
-#define ABS_MT_ORIENTATION 0x34 /* Ellipse orientation */
-#define ABS_MT_POSITION_X 0x35 /* Center X touch position */
-#define ABS_MT_POSITION_Y 0x36 /* Center Y touch position */
-#define ABS_MT_TOOL_TYPE 0x37 /* Type of touching device */
-#define ABS_MT_BLOB_ID 0x38 /* Group a set of packets as a blob */
-#define ABS_MT_TRACKING_ID 0x39 /* Unique ID of initiated contact */
-#define ABS_MT_PRESSURE 0x3a /* Pressure on contact area */
-#define ABS_MT_DISTANCE 0x3b /* Contact hover distance */
-#define ABS_MT_TOOL_X 0x3c /* Center X tool position */
-#define ABS_MT_TOOL_Y 0x3d /* Center Y tool position */
-
-#ifdef __KERNEL__
+#include <uapi/linux/input.h>
/* Implementation details, userspace should not care about these */
#define ABS_MT_FIRST ABS_MT_TOUCH_MAJOR
#define ABS_MT_LAST ABS_MT_TOOL_Y
-#endif
-
-#define ABS_MAX 0x3f
-#define ABS_CNT (ABS_MAX+1)
-
-/*
- * Switch events
- */
-
-#define SW_LID 0x00 /* set = lid shut */
-#define SW_TABLET_MODE 0x01 /* set = tablet mode */
-#define SW_HEADPHONE_INSERT 0x02 /* set = inserted */
-#define SW_RFKILL_ALL 0x03 /* rfkill master switch, type "any"
- set = radio enabled */
-#define SW_RADIO SW_RFKILL_ALL /* deprecated */
-#define SW_MICROPHONE_INSERT 0x04 /* set = inserted */
-#define SW_DOCK 0x05 /* set = plugged into dock */
-#define SW_LINEOUT_INSERT 0x06 /* set = inserted */
-#define SW_JACK_PHYSICAL_INSERT 0x07 /* set = mechanical switch set */
-#define SW_VIDEOOUT_INSERT 0x08 /* set = inserted */
-#define SW_CAMERA_LENS_COVER 0x09 /* set = lens covered */
-#define SW_KEYPAD_SLIDE 0x0a /* set = keypad slide out */
-#define SW_FRONT_PROXIMITY 0x0b /* set = front proximity sensor active */
-#define SW_ROTATE_LOCK 0x0c /* set = rotate locked/disabled */
-#define SW_LINEIN_INSERT 0x0d /* set = inserted */
-#define SW_MAX 0x0f
-#define SW_CNT (SW_MAX+1)
-
-/*
- * Misc events
- */
-
-#define MSC_SERIAL 0x00
-#define MSC_PULSELED 0x01
-#define MSC_GESTURE 0x02
-#define MSC_RAW 0x03
-#define MSC_SCAN 0x04
-#define MSC_MAX 0x07
-#define MSC_CNT (MSC_MAX+1)
-
-/*
- * LEDs
- */
-
-#define LED_NUML 0x00
-#define LED_CAPSL 0x01
-#define LED_SCROLLL 0x02
-#define LED_COMPOSE 0x03
-#define LED_KANA 0x04
-#define LED_SLEEP 0x05
-#define LED_SUSPEND 0x06
-#define LED_MUTE 0x07
-#define LED_MISC 0x08
-#define LED_MAIL 0x09
-#define LED_CHARGING 0x0a
-#define LED_MAX 0x0f
-#define LED_CNT (LED_MAX+1)
-
-/*
- * Autorepeat values
- */
-
-#define REP_DELAY 0x00
-#define REP_PERIOD 0x01
-#define REP_MAX 0x01
-#define REP_CNT (REP_MAX+1)
-
-/*
- * Sounds
- */
-
-#define SND_CLICK 0x00
-#define SND_BELL 0x01
-#define SND_TONE 0x02
-#define SND_MAX 0x07
-#define SND_CNT (SND_MAX+1)
-
-/*
- * IDs.
- */
-
-#define ID_BUS 0
-#define ID_VENDOR 1
-#define ID_PRODUCT 2
-#define ID_VERSION 3
-
-#define BUS_PCI 0x01
-#define BUS_ISAPNP 0x02
-#define BUS_USB 0x03
-#define BUS_HIL 0x04
-#define BUS_BLUETOOTH 0x05
-#define BUS_VIRTUAL 0x06
-
-#define BUS_ISA 0x10
-#define BUS_I8042 0x11
-#define BUS_XTKBD 0x12
-#define BUS_RS232 0x13
-#define BUS_GAMEPORT 0x14
-#define BUS_PARPORT 0x15
-#define BUS_AMIGA 0x16
-#define BUS_ADB 0x17
-#define BUS_I2C 0x18
-#define BUS_HOST 0x19
-#define BUS_GSC 0x1A
-#define BUS_ATARI 0x1B
-#define BUS_SPI 0x1C
-
-/*
- * MT_TOOL types
- */
-#define MT_TOOL_FINGER 0
-#define MT_TOOL_PEN 1
-#define MT_TOOL_MAX 1
-
-/*
- * Values describing the status of a force-feedback effect
- */
-#define FF_STATUS_STOPPED 0x00
-#define FF_STATUS_PLAYING 0x01
-#define FF_STATUS_MAX 0x01
-
-/*
- * Structures used in ioctls to upload effects to a device
- * They are pieces of a bigger structure (called ff_effect)
- */
-
-/*
- * All duration values are expressed in ms. Values above 32767 ms (0x7fff)
- * should not be used and have unspecified results.
- */
-
-/**
- * struct ff_replay - defines scheduling of the force-feedback effect
- * @length: duration of the effect
- * @delay: delay before effect should start playing
- */
-struct ff_replay {
- __u16 length;
- __u16 delay;
-};
-
-/**
- * struct ff_trigger - defines what triggers the force-feedback effect
- * @button: number of the button triggering the effect
- * @interval: controls how soon the effect can be re-triggered
- */
-struct ff_trigger {
- __u16 button;
- __u16 interval;
-};
-
-/**
- * struct ff_envelope - generic force-feedback effect envelope
- * @attack_length: duration of the attack (ms)
- * @attack_level: level at the beginning of the attack
- * @fade_length: duration of fade (ms)
- * @fade_level: level at the end of fade
- *
- * The @attack_level and @fade_level are absolute values; when applying
- * envelope force-feedback core will convert to positive/negative
- * value based on polarity of the default level of the effect.
- * Valid range for the attack and fade levels is 0x0000 - 0x7fff
- */
-struct ff_envelope {
- __u16 attack_length;
- __u16 attack_level;
- __u16 fade_length;
- __u16 fade_level;
-};
-
-/**
- * struct ff_constant_effect - defines parameters of a constant force-feedback effect
- * @level: strength of the effect; may be negative
- * @envelope: envelope data
- */
-struct ff_constant_effect {
- __s16 level;
- struct ff_envelope envelope;
-};
-
-/**
- * struct ff_ramp_effect - defines parameters of a ramp force-feedback effect
- * @start_level: beginning strength of the effect; may be negative
- * @end_level: final strength of the effect; may be negative
- * @envelope: envelope data
- */
-struct ff_ramp_effect {
- __s16 start_level;
- __s16 end_level;
- struct ff_envelope envelope;
-};
-
-/**
- * struct ff_condition_effect - defines a spring or friction force-feedback effect
- * @right_saturation: maximum level when joystick moved all way to the right
- * @left_saturation: same for the left side
- * @right_coeff: controls how fast the force grows when the joystick moves
- * to the right
- * @left_coeff: same for the left side
- * @deadband: size of the dead zone, where no force is produced
- * @center: position of the dead zone
- */
-struct ff_condition_effect {
- __u16 right_saturation;
- __u16 left_saturation;
-
- __s16 right_coeff;
- __s16 left_coeff;
-
- __u16 deadband;
- __s16 center;
-};
-
-/**
- * struct ff_periodic_effect - defines parameters of a periodic force-feedback effect
- * @waveform: kind of the effect (wave)
- * @period: period of the wave (ms)
- * @magnitude: peak value
- * @offset: mean value of the wave (roughly)
- * @phase: 'horizontal' shift
- * @envelope: envelope data
- * @custom_len: number of samples (FF_CUSTOM only)
- * @custom_data: buffer of samples (FF_CUSTOM only)
- *
- * Known waveforms - FF_SQUARE, FF_TRIANGLE, FF_SINE, FF_SAW_UP,
- * FF_SAW_DOWN, FF_CUSTOM. The exact syntax FF_CUSTOM is undefined
- * for the time being as no driver supports it yet.
- *
- * Note: the data pointed by custom_data is copied by the driver.
- * You can therefore dispose of the memory after the upload/update.
- */
-struct ff_periodic_effect {
- __u16 waveform;
- __u16 period;
- __s16 magnitude;
- __s16 offset;
- __u16 phase;
-
- struct ff_envelope envelope;
-
- __u32 custom_len;
- __s16 __user *custom_data;
-};
-
-/**
- * struct ff_rumble_effect - defines parameters of a periodic force-feedback effect
- * @strong_magnitude: magnitude of the heavy motor
- * @weak_magnitude: magnitude of the light one
- *
- * Some rumble pads have two motors of different weight. Strong_magnitude
- * represents the magnitude of the vibration generated by the heavy one.
- */
-struct ff_rumble_effect {
- __u16 strong_magnitude;
- __u16 weak_magnitude;
-};
-
-/**
- * struct ff_effect - defines force feedback effect
- * @type: type of the effect (FF_CONSTANT, FF_PERIODIC, FF_RAMP, FF_SPRING,
- * FF_FRICTION, FF_DAMPER, FF_RUMBLE, FF_INERTIA, or FF_CUSTOM)
- * @id: an unique id assigned to an effect
- * @direction: direction of the effect
- * @trigger: trigger conditions (struct ff_trigger)
- * @replay: scheduling of the effect (struct ff_replay)
- * @u: effect-specific structure (one of ff_constant_effect, ff_ramp_effect,
- * ff_periodic_effect, ff_condition_effect, ff_rumble_effect) further
- * defining effect parameters
- *
- * This structure is sent through ioctl from the application to the driver.
- * To create a new effect application should set its @id to -1; the kernel
- * will return assigned @id which can later be used to update or delete
- * this effect.
- *
- * Direction of the effect is encoded as follows:
- * 0 deg -> 0x0000 (down)
- * 90 deg -> 0x4000 (left)
- * 180 deg -> 0x8000 (up)
- * 270 deg -> 0xC000 (right)
- */
-struct ff_effect {
- __u16 type;
- __s16 id;
- __u16 direction;
- struct ff_trigger trigger;
- struct ff_replay replay;
-
- union {
- struct ff_constant_effect constant;
- struct ff_ramp_effect ramp;
- struct ff_periodic_effect periodic;
- struct ff_condition_effect condition[2]; /* One for each axis */
- struct ff_rumble_effect rumble;
- } u;
-};
-
-/*
- * Force feedback effect types
- */
-
-#define FF_RUMBLE 0x50
-#define FF_PERIODIC 0x51
-#define FF_CONSTANT 0x52
-#define FF_SPRING 0x53
-#define FF_FRICTION 0x54
-#define FF_DAMPER 0x55
-#define FF_INERTIA 0x56
-#define FF_RAMP 0x57
-
-#define FF_EFFECT_MIN FF_RUMBLE
-#define FF_EFFECT_MAX FF_RAMP
-
-/*
- * Force feedback periodic effect types
- */
-
-#define FF_SQUARE 0x58
-#define FF_TRIANGLE 0x59
-#define FF_SINE 0x5a
-#define FF_SAW_UP 0x5b
-#define FF_SAW_DOWN 0x5c
-#define FF_CUSTOM 0x5d
-
-#define FF_WAVEFORM_MIN FF_SQUARE
-#define FF_WAVEFORM_MAX FF_CUSTOM
-
-/*
- * Set ff device properties
- */
-
-#define FF_GAIN 0x60
-#define FF_AUTOCENTER 0x61
-
-#define FF_MAX 0x7f
-#define FF_CNT (FF_MAX+1)
-
-#ifdef __KERNEL__
/*
* In-kernel definitions.
@@ -1668,4 +524,3 @@
int (*play_effect)(struct input_dev *, void *, struct ff_effect *));
#endif
-#endif
diff --git a/include/linux/ip.h b/include/linux/ip.h
index bd0a2a8..58b82a2 100644
--- a/include/linux/ip.h
+++ b/include/linux/ip.h
@@ -16,96 +16,9 @@
*/
#ifndef _LINUX_IP_H
#define _LINUX_IP_H
-#include <linux/types.h>
-#include <asm/byteorder.h>
-#define IPTOS_TOS_MASK 0x1E
-#define IPTOS_TOS(tos) ((tos)&IPTOS_TOS_MASK)
-#define IPTOS_LOWDELAY 0x10
-#define IPTOS_THROUGHPUT 0x08
-#define IPTOS_RELIABILITY 0x04
-#define IPTOS_MINCOST 0x02
-
-#define IPTOS_PREC_MASK 0xE0
-#define IPTOS_PREC(tos) ((tos)&IPTOS_PREC_MASK)
-#define IPTOS_PREC_NETCONTROL 0xe0
-#define IPTOS_PREC_INTERNETCONTROL 0xc0
-#define IPTOS_PREC_CRITIC_ECP 0xa0
-#define IPTOS_PREC_FLASHOVERRIDE 0x80
-#define IPTOS_PREC_FLASH 0x60
-#define IPTOS_PREC_IMMEDIATE 0x40
-#define IPTOS_PREC_PRIORITY 0x20
-#define IPTOS_PREC_ROUTINE 0x00
-
-
-/* IP options */
-#define IPOPT_COPY 0x80
-#define IPOPT_CLASS_MASK 0x60
-#define IPOPT_NUMBER_MASK 0x1f
-
-#define IPOPT_COPIED(o) ((o)&IPOPT_COPY)
-#define IPOPT_CLASS(o) ((o)&IPOPT_CLASS_MASK)
-#define IPOPT_NUMBER(o) ((o)&IPOPT_NUMBER_MASK)
-
-#define IPOPT_CONTROL 0x00
-#define IPOPT_RESERVED1 0x20
-#define IPOPT_MEASUREMENT 0x40
-#define IPOPT_RESERVED2 0x60
-
-#define IPOPT_END (0 |IPOPT_CONTROL)
-#define IPOPT_NOOP (1 |IPOPT_CONTROL)
-#define IPOPT_SEC (2 |IPOPT_CONTROL|IPOPT_COPY)
-#define IPOPT_LSRR (3 |IPOPT_CONTROL|IPOPT_COPY)
-#define IPOPT_TIMESTAMP (4 |IPOPT_MEASUREMENT)
-#define IPOPT_CIPSO (6 |IPOPT_CONTROL|IPOPT_COPY)
-#define IPOPT_RR (7 |IPOPT_CONTROL)
-#define IPOPT_SID (8 |IPOPT_CONTROL|IPOPT_COPY)
-#define IPOPT_SSRR (9 |IPOPT_CONTROL|IPOPT_COPY)
-#define IPOPT_RA (20|IPOPT_CONTROL|IPOPT_COPY)
-
-#define IPVERSION 4
-#define MAXTTL 255
-#define IPDEFTTL 64
-
-#define IPOPT_OPTVAL 0
-#define IPOPT_OLEN 1
-#define IPOPT_OFFSET 2
-#define IPOPT_MINOFF 4
-#define MAX_IPOPTLEN 40
-#define IPOPT_NOP IPOPT_NOOP
-#define IPOPT_EOL IPOPT_END
-#define IPOPT_TS IPOPT_TIMESTAMP
-
-#define IPOPT_TS_TSONLY 0 /* timestamps only */
-#define IPOPT_TS_TSANDADDR 1 /* timestamps and addresses */
-#define IPOPT_TS_PRESPEC 3 /* specified modules only */
-
-#define IPV4_BEET_PHMAXLEN 8
-
-struct iphdr {
-#if defined(__LITTLE_ENDIAN_BITFIELD)
- __u8 ihl:4,
- version:4;
-#elif defined (__BIG_ENDIAN_BITFIELD)
- __u8 version:4,
- ihl:4;
-#else
-#error "Please fix <asm/byteorder.h>"
-#endif
- __u8 tos;
- __be16 tot_len;
- __be16 id;
- __be16 frag_off;
- __u8 ttl;
- __u8 protocol;
- __sum16 check;
- __be32 saddr;
- __be32 daddr;
- /*The options start here. */
-};
-
-#ifdef __KERNEL__
#include <linux/skbuff.h>
+#include <uapi/linux/ip.h>
static inline struct iphdr *ip_hdr(const struct sk_buff *skb)
{
@@ -116,34 +29,4 @@
{
return (struct iphdr *)skb_transport_header(skb);
}
-#endif
-
-struct ip_auth_hdr {
- __u8 nexthdr;
- __u8 hdrlen; /* This one is measured in 32 bit units! */
- __be16 reserved;
- __be32 spi;
- __be32 seq_no; /* Sequence number */
- __u8 auth_data[0]; /* Variable len but >=4. Mind the 64 bit alignment! */
-};
-
-struct ip_esp_hdr {
- __be32 spi;
- __be32 seq_no; /* Sequence number */
- __u8 enc_data[0]; /* Variable len but >=8. Mind the 64 bit alignment! */
-};
-
-struct ip_comp_hdr {
- __u8 nexthdr;
- __u8 flags;
- __be16 cpi;
-};
-
-struct ip_beet_phdr {
- __u8 nexthdr;
- __u8 hdrlen;
- __u8 padlen;
- __u8 reserved;
-};
-
#endif /* _LINUX_IP_H */
diff --git a/include/linux/ipc.h b/include/linux/ipc.h
index ca833fd..8d861b2 100644
--- a/include/linux/ipc.h
+++ b/include/linux/ipc.h
@@ -1,85 +1,9 @@
#ifndef _LINUX_IPC_H
#define _LINUX_IPC_H
-#include <linux/types.h>
-
-#define IPC_PRIVATE ((__kernel_key_t) 0)
-
-/* Obsolete, used only for backwards compatibility and libc5 compiles */
-struct ipc_perm
-{
- __kernel_key_t key;
- __kernel_uid_t uid;
- __kernel_gid_t gid;
- __kernel_uid_t cuid;
- __kernel_gid_t cgid;
- __kernel_mode_t mode;
- unsigned short seq;
-};
-
-/* Include the definition of ipc64_perm */
-#include <asm/ipcbuf.h>
-
-/* resource get request flags */
-#define IPC_CREAT 00001000 /* create if key is nonexistent */
-#define IPC_EXCL 00002000 /* fail if key exists */
-#define IPC_NOWAIT 00004000 /* return error on wait */
-
-/* these fields are used by the DIPC package so the kernel as standard
- should avoid using them if possible */
-
-#define IPC_DIPC 00010000 /* make it distributed */
-#define IPC_OWN 00020000 /* this machine is the DIPC owner */
-
-/*
- * Control commands used with semctl, msgctl and shmctl
- * see also specific commands in sem.h, msg.h and shm.h
- */
-#define IPC_RMID 0 /* remove resource */
-#define IPC_SET 1 /* set ipc_perm options */
-#define IPC_STAT 2 /* get ipc_perm options */
-#define IPC_INFO 3 /* see ipcs */
-
-/*
- * Version flags for semctl, msgctl, and shmctl commands
- * These are passed as bitflags or-ed with the actual command
- */
-#define IPC_OLD 0 /* Old version (no 32-bit UID support on many
- architectures) */
-#define IPC_64 0x0100 /* New version (support 32-bit UIDs, bigger
- message sizes, etc. */
-
-/*
- * These are used to wrap system calls.
- *
- * See architecture code for ugly details..
- */
-struct ipc_kludge {
- struct msgbuf __user *msgp;
- long msgtyp;
-};
-
-#define SEMOP 1
-#define SEMGET 2
-#define SEMCTL 3
-#define SEMTIMEDOP 4
-#define MSGSND 11
-#define MSGRCV 12
-#define MSGGET 13
-#define MSGCTL 14
-#define SHMAT 21
-#define SHMDT 22
-#define SHMGET 23
-#define SHMCTL 24
-
-/* Used by the DIPC package, try and avoid reusing it */
-#define DIPC 25
-
-#define IPCCALL(version,op) ((version)<<16 | (op))
-
-#ifdef __KERNEL__
#include <linux/spinlock.h>
#include <linux/uidgid.h>
+#include <uapi/linux/ipc.h>
#define IPCMNI 32768 /* <= MAX_INT limit for ipc arrays (including sysctl changes) */
@@ -99,6 +23,4 @@
void *security;
};
-#endif /* __KERNEL__ */
-
#endif /* _LINUX_IPC_H */
diff --git a/include/linux/ipmi.h b/include/linux/ipmi.h
index 48dcba9..1487e79 100644
--- a/include/linux/ipmi.h
+++ b/include/linux/ipmi.h
@@ -30,191 +30,11 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-
#ifndef __LINUX_IPMI_H
#define __LINUX_IPMI_H
-#include <linux/ipmi_msgdefs.h>
-#include <linux/compiler.h>
+#include <uapi/linux/ipmi.h>
-/*
- * This file describes an interface to an IPMI driver. You have to
- * have a fairly good understanding of IPMI to use this, so go read
- * the specs first before actually trying to do anything.
- *
- * With that said, this driver provides a multi-user interface to the
- * IPMI driver, and it allows multiple IPMI physical interfaces below
- * the driver. The physical interfaces bind as a lower layer on the
- * driver. They appear as interfaces to the application using this
- * interface.
- *
- * Multi-user means that multiple applications may use the driver,
- * send commands, receive responses, etc. The driver keeps track of
- * commands the user sends and tracks the responses. The responses
- * will go back to the application that send the command. If the
- * response doesn't come back in time, the driver will return a
- * timeout error response to the application. Asynchronous events
- * from the BMC event queue will go to all users bound to the driver.
- * The incoming event queue in the BMC will automatically be flushed
- * if it becomes full and it is queried once a second to see if
- * anything is in it. Incoming commands to the driver will get
- * delivered as commands.
- *
- * This driver provides two main interfaces: one for in-kernel
- * applications and another for userland applications. The
- * capabilities are basically the same for both interface, although
- * the interfaces are somewhat different. The stuff in the
- * #ifdef __KERNEL__ below is the in-kernel interface. The userland
- * interface is defined later in the file. */
-
-
-
-/*
- * This is an overlay for all the address types, so it's easy to
- * determine the actual address type. This is kind of like addresses
- * work for sockets.
- */
-#define IPMI_MAX_ADDR_SIZE 32
-struct ipmi_addr {
- /* Try to take these from the "Channel Medium Type" table
- in section 6.5 of the IPMI 1.5 manual. */
- int addr_type;
- short channel;
- char data[IPMI_MAX_ADDR_SIZE];
-};
-
-/*
- * When the address is not used, the type will be set to this value.
- * The channel is the BMC's channel number for the channel (usually
- * 0), or IPMC_BMC_CHANNEL if communicating directly with the BMC.
- */
-#define IPMI_SYSTEM_INTERFACE_ADDR_TYPE 0x0c
-struct ipmi_system_interface_addr {
- int addr_type;
- short channel;
- unsigned char lun;
-};
-
-/* An IPMB Address. */
-#define IPMI_IPMB_ADDR_TYPE 0x01
-/* Used for broadcast get device id as described in section 17.9 of the
- IPMI 1.5 manual. */
-#define IPMI_IPMB_BROADCAST_ADDR_TYPE 0x41
-struct ipmi_ipmb_addr {
- int addr_type;
- short channel;
- unsigned char slave_addr;
- unsigned char lun;
-};
-
-/*
- * A LAN Address. This is an address to/from a LAN interface bridged
- * by the BMC, not an address actually out on the LAN.
- *
- * A conscious decision was made here to deviate slightly from the IPMI
- * spec. We do not use rqSWID and rsSWID like it shows in the
- * message. Instead, we use remote_SWID and local_SWID. This means
- * that any message (a request or response) from another device will
- * always have exactly the same address. If you didn't do this,
- * requests and responses from the same device would have different
- * addresses, and that's not too cool.
- *
- * In this address, the remote_SWID is always the SWID the remote
- * message came from, or the SWID we are sending the message to.
- * local_SWID is always our SWID. Note that having our SWID in the
- * message is a little weird, but this is required.
- */
-#define IPMI_LAN_ADDR_TYPE 0x04
-struct ipmi_lan_addr {
- int addr_type;
- short channel;
- unsigned char privilege;
- unsigned char session_handle;
- unsigned char remote_SWID;
- unsigned char local_SWID;
- unsigned char lun;
-};
-
-
-/*
- * Channel for talking directly with the BMC. When using this
- * channel, This is for the system interface address type only. FIXME
- * - is this right, or should we use -1?
- */
-#define IPMI_BMC_CHANNEL 0xf
-#define IPMI_NUM_CHANNELS 0x10
-
-/*
- * Used to signify an "all channel" bitmask. This is more than the
- * actual number of channels because this is used in userland and
- * will cover us if the number of channels is extended.
- */
-#define IPMI_CHAN_ALL (~0)
-
-
-/*
- * A raw IPMI message without any addressing. This covers both
- * commands and responses. The completion code is always the first
- * byte of data in the response (as the spec shows the messages laid
- * out).
- */
-struct ipmi_msg {
- unsigned char netfn;
- unsigned char cmd;
- unsigned short data_len;
- unsigned char __user *data;
-};
-
-struct kernel_ipmi_msg {
- unsigned char netfn;
- unsigned char cmd;
- unsigned short data_len;
- unsigned char *data;
-};
-
-/*
- * Various defines that are useful for IPMI applications.
- */
-#define IPMI_INVALID_CMD_COMPLETION_CODE 0xC1
-#define IPMI_TIMEOUT_COMPLETION_CODE 0xC3
-#define IPMI_UNKNOWN_ERR_COMPLETION_CODE 0xff
-
-
-/*
- * Receive types for messages coming from the receive interface. This
- * is used for the receive in-kernel interface and in the receive
- * IOCTL.
- *
- * The "IPMI_RESPONSE_RESPNOSE_TYPE" is a little strange sounding, but
- * it allows you to get the message results when you send a response
- * message.
- */
-#define IPMI_RESPONSE_RECV_TYPE 1 /* A response to a command */
-#define IPMI_ASYNC_EVENT_RECV_TYPE 2 /* Something from the event queue */
-#define IPMI_CMD_RECV_TYPE 3 /* A command from somewhere else */
-#define IPMI_RESPONSE_RESPONSE_TYPE 4 /* The response for
- a sent response, giving any
- error status for sending the
- response. When you send a
- response message, this will
- be returned. */
-#define IPMI_OEM_RECV_TYPE 5 /* The response for OEM Channels */
-
-/* Note that async events and received commands do not have a completion
- code as the first byte of the incoming data, unlike a response. */
-
-
-/*
- * Modes for ipmi_set_maint_mode() and the userland IOCTL. The AUTO
- * setting is the default and means it will be set on certain
- * commands. Hard setting it on and off will override automatic
- * operation.
- */
-#define IPMI_MAINTENANCE_MODE_AUTO 0
-#define IPMI_MAINTENANCE_MODE_OFF 1
-#define IPMI_MAINTENANCE_MODE_ON 2
-
-#ifdef __KERNEL__
/*
* The in-kernel interface.
@@ -493,244 +313,4 @@
/* This is to get the private info of ipmi_smi_t */
extern int ipmi_get_smi_info(int if_num, struct ipmi_smi_info *data);
-#endif /* __KERNEL__ */
-
-
-/*
- * The userland interface
- */
-
-/*
- * The userland interface for the IPMI driver is a standard character
- * device, with each instance of an interface registered as a minor
- * number under the major character device.
- *
- * The read and write calls do not work, to get messages in and out
- * requires ioctl calls because of the complexity of the data. select
- * and poll do work, so you can wait for input using the file
- * descriptor, you just can use read to get it.
- *
- * In general, you send a command down to the interface and receive
- * responses back. You can use the msgid value to correlate commands
- * and responses, the driver will take care of figuring out which
- * incoming messages are for which command and find the proper msgid
- * value to report. You will only receive reponses for commands you
- * send. Asynchronous events, however, go to all open users, so you
- * must be ready to handle these (or ignore them if you don't care).
- *
- * The address type depends upon the channel type. When talking
- * directly to the BMC (IPMC_BMC_CHANNEL), the address is ignored
- * (IPMI_UNUSED_ADDR_TYPE). When talking to an IPMB channel, you must
- * supply a valid IPMB address with the addr_type set properly.
- *
- * When talking to normal channels, the driver takes care of the
- * details of formatting and sending messages on that channel. You do
- * not, for instance, have to format a send command, you just send
- * whatever command you want to the channel, the driver will create
- * the send command, automatically issue receive command and get even
- * commands, and pass those up to the proper user.
- */
-
-
-/* The magic IOCTL value for this interface. */
-#define IPMI_IOC_MAGIC 'i'
-
-
-/* Messages sent to the interface are this format. */
-struct ipmi_req {
- unsigned char __user *addr; /* Address to send the message to. */
- unsigned int addr_len;
-
- long msgid; /* The sequence number for the message. This
- exact value will be reported back in the
- response to this request if it is a command.
- If it is a response, this will be used as
- the sequence value for the response. */
-
- struct ipmi_msg msg;
-};
-/*
- * Send a message to the interfaces. error values are:
- * - EFAULT - an address supplied was invalid.
- * - EINVAL - The address supplied was not valid, or the command
- * was not allowed.
- * - EMSGSIZE - The message to was too large.
- * - ENOMEM - Buffers could not be allocated for the command.
- */
-#define IPMICTL_SEND_COMMAND _IOR(IPMI_IOC_MAGIC, 13, \
- struct ipmi_req)
-
-/* Messages sent to the interface with timing parameters are this
- format. */
-struct ipmi_req_settime {
- struct ipmi_req req;
-
- /* See ipmi_request_settime() above for details on these
- values. */
- int retries;
- unsigned int retry_time_ms;
-};
-/*
- * Send a message to the interfaces with timing parameters. error values
- * are:
- * - EFAULT - an address supplied was invalid.
- * - EINVAL - The address supplied was not valid, or the command
- * was not allowed.
- * - EMSGSIZE - The message to was too large.
- * - ENOMEM - Buffers could not be allocated for the command.
- */
-#define IPMICTL_SEND_COMMAND_SETTIME _IOR(IPMI_IOC_MAGIC, 21, \
- struct ipmi_req_settime)
-
-/* Messages received from the interface are this format. */
-struct ipmi_recv {
- int recv_type; /* Is this a command, response or an
- asyncronous event. */
-
- unsigned char __user *addr; /* Address the message was from is put
- here. The caller must supply the
- memory. */
- unsigned int addr_len; /* The size of the address buffer.
- The caller supplies the full buffer
- length, this value is updated to
- the actual message length when the
- message is received. */
-
- long msgid; /* The sequence number specified in the request
- if this is a response. If this is a command,
- this will be the sequence number from the
- command. */
-
- struct ipmi_msg msg; /* The data field must point to a buffer.
- The data_size field must be set to the
- size of the message buffer. The
- caller supplies the full buffer
- length, this value is updated to the
- actual message length when the message
- is received. */
-};
-
-/*
- * Receive a message. error values:
- * - EAGAIN - no messages in the queue.
- * - EFAULT - an address supplied was invalid.
- * - EINVAL - The address supplied was not valid.
- * - EMSGSIZE - The message to was too large to fit into the message buffer,
- * the message will be left in the buffer. */
-#define IPMICTL_RECEIVE_MSG _IOWR(IPMI_IOC_MAGIC, 12, \
- struct ipmi_recv)
-
-/*
- * Like RECEIVE_MSG, but if the message won't fit in the buffer, it
- * will truncate the contents instead of leaving the data in the
- * buffer.
- */
-#define IPMICTL_RECEIVE_MSG_TRUNC _IOWR(IPMI_IOC_MAGIC, 11, \
- struct ipmi_recv)
-
-/* Register to get commands from other entities on this interface. */
-struct ipmi_cmdspec {
- unsigned char netfn;
- unsigned char cmd;
-};
-
-/*
- * Register to receive a specific command. error values:
- * - EFAULT - an address supplied was invalid.
- * - EBUSY - The netfn/cmd supplied was already in use.
- * - ENOMEM - could not allocate memory for the entry.
- */
-#define IPMICTL_REGISTER_FOR_CMD _IOR(IPMI_IOC_MAGIC, 14, \
- struct ipmi_cmdspec)
-/*
- * Unregister a regsitered command. error values:
- * - EFAULT - an address supplied was invalid.
- * - ENOENT - The netfn/cmd was not found registered for this user.
- */
-#define IPMICTL_UNREGISTER_FOR_CMD _IOR(IPMI_IOC_MAGIC, 15, \
- struct ipmi_cmdspec)
-
-/*
- * Register to get commands from other entities on specific channels.
- * This way, you can only listen on specific channels, or have messages
- * from some channels go to one place and other channels to someplace
- * else. The chans field is a bitmask, (1 << channel) for each channel.
- * It may be IPMI_CHAN_ALL for all channels.
- */
-struct ipmi_cmdspec_chans {
- unsigned int netfn;
- unsigned int cmd;
- unsigned int chans;
-};
-
-/*
- * Register to receive a specific command on specific channels. error values:
- * - EFAULT - an address supplied was invalid.
- * - EBUSY - One of the netfn/cmd/chans supplied was already in use.
- * - ENOMEM - could not allocate memory for the entry.
- */
-#define IPMICTL_REGISTER_FOR_CMD_CHANS _IOR(IPMI_IOC_MAGIC, 28, \
- struct ipmi_cmdspec_chans)
-/*
- * Unregister some netfn/cmd/chans. error values:
- * - EFAULT - an address supplied was invalid.
- * - ENOENT - None of the netfn/cmd/chans were found registered for this user.
- */
-#define IPMICTL_UNREGISTER_FOR_CMD_CHANS _IOR(IPMI_IOC_MAGIC, 29, \
- struct ipmi_cmdspec_chans)
-
-/*
- * Set whether this interface receives events. Note that the first
- * user registered for events will get all pending events for the
- * interface. error values:
- * - EFAULT - an address supplied was invalid.
- */
-#define IPMICTL_SET_GETS_EVENTS_CMD _IOR(IPMI_IOC_MAGIC, 16, int)
-
-/*
- * Set and get the slave address and LUN that we will use for our
- * source messages. Note that this affects the interface, not just
- * this user, so it will affect all users of this interface. This is
- * so some initialization code can come in and do the OEM-specific
- * things it takes to determine your address (if not the BMC) and set
- * it for everyone else. You should probably leave the LUN alone.
- */
-struct ipmi_channel_lun_address_set {
- unsigned short channel;
- unsigned char value;
-};
-#define IPMICTL_SET_MY_CHANNEL_ADDRESS_CMD \
- _IOR(IPMI_IOC_MAGIC, 24, struct ipmi_channel_lun_address_set)
-#define IPMICTL_GET_MY_CHANNEL_ADDRESS_CMD \
- _IOR(IPMI_IOC_MAGIC, 25, struct ipmi_channel_lun_address_set)
-#define IPMICTL_SET_MY_CHANNEL_LUN_CMD \
- _IOR(IPMI_IOC_MAGIC, 26, struct ipmi_channel_lun_address_set)
-#define IPMICTL_GET_MY_CHANNEL_LUN_CMD \
- _IOR(IPMI_IOC_MAGIC, 27, struct ipmi_channel_lun_address_set)
-/* Legacy interfaces, these only set IPMB 0. */
-#define IPMICTL_SET_MY_ADDRESS_CMD _IOR(IPMI_IOC_MAGIC, 17, unsigned int)
-#define IPMICTL_GET_MY_ADDRESS_CMD _IOR(IPMI_IOC_MAGIC, 18, unsigned int)
-#define IPMICTL_SET_MY_LUN_CMD _IOR(IPMI_IOC_MAGIC, 19, unsigned int)
-#define IPMICTL_GET_MY_LUN_CMD _IOR(IPMI_IOC_MAGIC, 20, unsigned int)
-
-/*
- * Get/set the default timing values for an interface. You shouldn't
- * generally mess with these.
- */
-struct ipmi_timing_parms {
- int retries;
- unsigned int retry_time_ms;
-};
-#define IPMICTL_SET_TIMING_PARMS_CMD _IOR(IPMI_IOC_MAGIC, 22, \
- struct ipmi_timing_parms)
-#define IPMICTL_GET_TIMING_PARMS_CMD _IOR(IPMI_IOC_MAGIC, 23, \
- struct ipmi_timing_parms)
-
-/*
- * Set the maintenance mode. See ipmi_set_maintenance_mode() above
- * for a description of what this does.
- */
-#define IPMICTL_GET_MAINTENANCE_MODE_CMD _IOR(IPMI_IOC_MAGIC, 30, int)
-#define IPMICTL_SET_MAINTENANCE_MODE_CMD _IOW(IPMI_IOC_MAGIC, 31, int)
-
#endif /* __LINUX_IPMI_H */
diff --git a/include/linux/ipv6.h b/include/linux/ipv6.h
index 0b94e91..bcba48a 100644
--- a/include/linux/ipv6.h
+++ b/include/linux/ipv6.h
@@ -1,134 +1,9 @@
#ifndef _IPV6_H
#define _IPV6_H
-#include <linux/types.h>
-#include <linux/in6.h>
-#include <asm/byteorder.h>
+#include <uapi/linux/ipv6.h>
-/* The latest drafts declared increase in minimal mtu up to 1280. */
-
-#define IPV6_MIN_MTU 1280
-
-/*
- * Advanced API
- * source interface/address selection, source routing, etc...
- * *under construction*
- */
-
-
-struct in6_pktinfo {
- struct in6_addr ipi6_addr;
- int ipi6_ifindex;
-};
-
-struct ip6_mtuinfo {
- struct sockaddr_in6 ip6m_addr;
- __u32 ip6m_mtu;
-};
-
-struct in6_ifreq {
- struct in6_addr ifr6_addr;
- __u32 ifr6_prefixlen;
- int ifr6_ifindex;
-};
-
-#define IPV6_SRCRT_STRICT 0x01 /* Deprecated; will be removed */
-#define IPV6_SRCRT_TYPE_0 0 /* Deprecated; will be removed */
-#define IPV6_SRCRT_TYPE_2 2 /* IPv6 type 2 Routing Header */
-
-/*
- * routing header
- */
-struct ipv6_rt_hdr {
- __u8 nexthdr;
- __u8 hdrlen;
- __u8 type;
- __u8 segments_left;
-
- /*
- * type specific data
- * variable length field
- */
-};
-
-
-struct ipv6_opt_hdr {
- __u8 nexthdr;
- __u8 hdrlen;
- /*
- * TLV encoded option data follows.
- */
-} __attribute__((packed)); /* required for some archs */
-
-#define ipv6_destopt_hdr ipv6_opt_hdr
-#define ipv6_hopopt_hdr ipv6_opt_hdr
-
-#ifdef __KERNEL__
#define ipv6_optlen(p) (((p)->hdrlen+1) << 3)
-#endif
-
-/*
- * routing header type 0 (used in cmsghdr struct)
- */
-
-struct rt0_hdr {
- struct ipv6_rt_hdr rt_hdr;
- __u32 reserved;
- struct in6_addr addr[0];
-
-#define rt0_type rt_hdr.type
-};
-
-/*
- * routing header type 2
- */
-
-struct rt2_hdr {
- struct ipv6_rt_hdr rt_hdr;
- __u32 reserved;
- struct in6_addr addr;
-
-#define rt2_type rt_hdr.type
-};
-
-/*
- * home address option in destination options header
- */
-
-struct ipv6_destopt_hao {
- __u8 type;
- __u8 length;
- struct in6_addr addr;
-} __attribute__((packed));
-
-/*
- * IPv6 fixed header
- *
- * BEWARE, it is incorrect. The first 4 bits of flow_lbl
- * are glued to priority now, forming "class".
- */
-
-struct ipv6hdr {
-#if defined(__LITTLE_ENDIAN_BITFIELD)
- __u8 priority:4,
- version:4;
-#elif defined(__BIG_ENDIAN_BITFIELD)
- __u8 version:4,
- priority:4;
-#else
-#error "Please fix <asm/byteorder.h>"
-#endif
- __u8 flow_lbl[3];
-
- __be16 payload_len;
- __u8 nexthdr;
- __u8 hop_limit;
-
- struct in6_addr saddr;
- struct in6_addr daddr;
-};
-
-#ifdef __KERNEL__
/*
* This structure contains configuration options per IPv6 link.
*/
@@ -180,43 +55,6 @@
__s32 autoconf;
};
extern struct ipv6_params ipv6_defaults;
-#endif
-
-/* index values for the variables in ipv6_devconf */
-enum {
- DEVCONF_FORWARDING = 0,
- DEVCONF_HOPLIMIT,
- DEVCONF_MTU6,
- DEVCONF_ACCEPT_RA,
- DEVCONF_ACCEPT_REDIRECTS,
- DEVCONF_AUTOCONF,
- DEVCONF_DAD_TRANSMITS,
- DEVCONF_RTR_SOLICITS,
- DEVCONF_RTR_SOLICIT_INTERVAL,
- DEVCONF_RTR_SOLICIT_DELAY,
- DEVCONF_USE_TEMPADDR,
- DEVCONF_TEMP_VALID_LFT,
- DEVCONF_TEMP_PREFERED_LFT,
- DEVCONF_REGEN_MAX_RETRY,
- DEVCONF_MAX_DESYNC_FACTOR,
- DEVCONF_MAX_ADDRESSES,
- DEVCONF_FORCE_MLD_VERSION,
- DEVCONF_ACCEPT_RA_DEFRTR,
- DEVCONF_ACCEPT_RA_PINFO,
- DEVCONF_ACCEPT_RA_RTR_PREF,
- DEVCONF_RTR_PROBE_INTERVAL,
- DEVCONF_ACCEPT_RA_RT_INFO_MAX_PLEN,
- DEVCONF_PROXY_NDP,
- DEVCONF_OPTIMISTIC_DAD,
- DEVCONF_ACCEPT_SOURCE_ROUTE,
- DEVCONF_MC_FORWARDING,
- DEVCONF_DISABLE_IPV6,
- DEVCONF_ACCEPT_DAD,
- DEVCONF_FORCE_TLLAO,
- DEVCONF_MAX
-};
-
-#ifdef __KERNEL__
#include <linux/icmpv6.h>
#include <linux/tcp.h>
#include <linux/udp.h>
@@ -541,6 +379,4 @@
(ipv6_addr_equal(&inet6_twsk(__sk)->tw_v6_rcv_saddr, (__daddr))) && \
(!((__sk)->sk_bound_dev_if) || ((__sk)->sk_bound_dev_if == (__dif))))
-#endif /* __KERNEL__ */
-
#endif /* _IPV6_H */
diff --git a/include/linux/ipv6_route.h b/include/linux/ipv6_route.h
index 1e7d8af..25b5f1f 100644
--- a/include/linux/ipv6_route.h
+++ b/include/linux/ipv6_route.h
@@ -9,54 +9,11 @@
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
-
#ifndef _LINUX_IPV6_ROUTE_H
#define _LINUX_IPV6_ROUTE_H
-#include <linux/types.h>
+#include <uapi/linux/ipv6_route.h>
-#define RTF_DEFAULT 0x00010000 /* default - learned via ND */
-#define RTF_ALLONLINK 0x00020000 /* (deprecated and will be removed)
- fallback, no routers on link */
-#define RTF_ADDRCONF 0x00040000 /* addrconf route - RA */
-#define RTF_PREFIX_RT 0x00080000 /* A prefix only route - RA */
-#define RTF_ANYCAST 0x00100000 /* Anycast */
-
-#define RTF_NONEXTHOP 0x00200000 /* route with no nexthop */
-#define RTF_EXPIRES 0x00400000
-
-#define RTF_ROUTEINFO 0x00800000 /* route information - RA */
-
-#define RTF_CACHE 0x01000000 /* cache entry */
-#define RTF_FLOW 0x02000000 /* flow significant route */
-#define RTF_POLICY 0x04000000 /* policy route */
-
-#define RTF_PREF(pref) ((pref) << 27)
-#define RTF_PREF_MASK 0x18000000
-
-#define RTF_LOCAL 0x80000000
-
-#ifdef __KERNEL__
#define IPV6_EXTRACT_PREF(flag) (((flag) & RTF_PREF_MASK) >> 27)
#define IPV6_DECODE_PREF(pref) ((pref) ^ 2) /* 1:low,2:med,3:high */
#endif
-
-struct in6_rtmsg {
- struct in6_addr rtmsg_dst;
- struct in6_addr rtmsg_src;
- struct in6_addr rtmsg_gateway;
- __u32 rtmsg_type;
- __u16 rtmsg_dst_len;
- __u16 rtmsg_src_len;
- __u32 rtmsg_metric;
- unsigned long rtmsg_info;
- __u32 rtmsg_flags;
- int rtmsg_ifindex;
-};
-
-#define RTMSG_NEWDEVICE 0x11
-#define RTMSG_DELDEVICE 0x12
-#define RTMSG_NEWROUTE 0x21
-#define RTMSG_DELROUTE 0x22
-
-#endif
diff --git a/include/linux/irqnr.h b/include/linux/irqnr.h
index 3bc4dca..0a2dc46 100644
--- a/include/linux/irqnr.h
+++ b/include/linux/irqnr.h
@@ -1,10 +1,8 @@
#ifndef _LINUX_IRQNR_H
#define _LINUX_IRQNR_H
-/*
- * Generic irq_desc iterators:
- */
-#ifdef __KERNEL__
+#include <uapi/linux/irqnr.h>
+
#ifndef CONFIG_GENERIC_HARDIRQS
#include <asm/irq.h>
@@ -57,6 +55,4 @@
#define for_each_irq_nr(irq) \
for (irq = 0; irq < nr_irqs; irq++)
-#endif /* __KERNEL__ */
-
#endif
diff --git a/include/linux/isdn.h b/include/linux/isdn.h
index 215c416..1e9a0f2 100644
--- a/include/linux/isdn.h
+++ b/include/linux/isdn.h
@@ -10,136 +10,9 @@
* of the GNU General Public License, incorporated herein by reference.
*
*/
-
#ifndef __ISDN_H__
#define __ISDN_H__
-#include <linux/ioctl.h>
-#include <linux/tty.h>
-
-#define ISDN_MAX_DRIVERS 32
-#define ISDN_MAX_CHANNELS 64
-
-/* New ioctl-codes */
-#define IIOCNETAIF _IO('I',1)
-#define IIOCNETDIF _IO('I',2)
-#define IIOCNETSCF _IO('I',3)
-#define IIOCNETGCF _IO('I',4)
-#define IIOCNETANM _IO('I',5)
-#define IIOCNETDNM _IO('I',6)
-#define IIOCNETGNM _IO('I',7)
-#define IIOCGETSET _IO('I',8) /* no longer supported */
-#define IIOCSETSET _IO('I',9) /* no longer supported */
-#define IIOCSETVER _IO('I',10)
-#define IIOCNETHUP _IO('I',11)
-#define IIOCSETGST _IO('I',12)
-#define IIOCSETBRJ _IO('I',13)
-#define IIOCSIGPRF _IO('I',14)
-#define IIOCGETPRF _IO('I',15)
-#define IIOCSETPRF _IO('I',16)
-#define IIOCGETMAP _IO('I',17)
-#define IIOCSETMAP _IO('I',18)
-#define IIOCNETASL _IO('I',19)
-#define IIOCNETDIL _IO('I',20)
-#define IIOCGETCPS _IO('I',21)
-#define IIOCGETDVR _IO('I',22)
-#define IIOCNETLCR _IO('I',23) /* dwabc ioctl for LCR from isdnlog */
-#define IIOCNETDWRSET _IO('I',24) /* dwabc ioctl to reset abc-values to default on a net-interface */
-
-#define IIOCNETALN _IO('I',32)
-#define IIOCNETDLN _IO('I',33)
-
-#define IIOCNETGPN _IO('I',34)
-
-#define IIOCDBGVAR _IO('I',127)
-
-#define IIOCDRVCTL _IO('I',128)
-
-/* cisco hdlck device private ioctls */
-#define SIOCGKEEPPERIOD (SIOCDEVPRIVATE + 0)
-#define SIOCSKEEPPERIOD (SIOCDEVPRIVATE + 1)
-#define SIOCGDEBSERINT (SIOCDEVPRIVATE + 2)
-#define SIOCSDEBSERINT (SIOCDEVPRIVATE + 3)
-
-/* Packet encapsulations for net-interfaces */
-#define ISDN_NET_ENCAP_ETHER 0
-#define ISDN_NET_ENCAP_RAWIP 1
-#define ISDN_NET_ENCAP_IPTYP 2
-#define ISDN_NET_ENCAP_CISCOHDLC 3 /* Without SLARP and keepalive */
-#define ISDN_NET_ENCAP_SYNCPPP 4
-#define ISDN_NET_ENCAP_UIHDLC 5
-#define ISDN_NET_ENCAP_CISCOHDLCK 6 /* With SLARP and keepalive */
-#define ISDN_NET_ENCAP_X25IFACE 7 /* Documentation/networking/x25-iface.txt */
-#define ISDN_NET_ENCAP_MAX_ENCAP ISDN_NET_ENCAP_X25IFACE
-
-/* Facility which currently uses an ISDN-channel */
-#define ISDN_USAGE_NONE 0
-#define ISDN_USAGE_RAW 1
-#define ISDN_USAGE_MODEM 2
-#define ISDN_USAGE_NET 3
-#define ISDN_USAGE_VOICE 4
-#define ISDN_USAGE_FAX 5
-#define ISDN_USAGE_MASK 7 /* Mask to get plain usage */
-#define ISDN_USAGE_DISABLED 32 /* This bit is set, if channel is disabled */
-#define ISDN_USAGE_EXCLUSIVE 64 /* This bit is set, if channel is exclusive */
-#define ISDN_USAGE_OUTGOING 128 /* This bit is set, if channel is outgoing */
-
-#define ISDN_MODEM_NUMREG 24 /* Number of Modem-Registers */
-#define ISDN_LMSNLEN 255 /* Length of tty's Listen-MSN string */
-#define ISDN_CMSGLEN 50 /* Length of CONNECT-Message to add for Modem */
-
-#define ISDN_MSNLEN 32
-#define NET_DV 0x06 /* Data version for isdn_net_ioctl_cfg */
-#define TTY_DV 0x06 /* Data version for iprofd etc. */
-
-#define INF_DV 0x01 /* Data version for /dev/isdninfo */
-
-typedef struct {
- char drvid[25];
- unsigned long arg;
-} isdn_ioctl_struct;
-
-typedef struct {
- char name[10];
- char phone[ISDN_MSNLEN];
- int outgoing;
-} isdn_net_ioctl_phone;
-
-typedef struct {
- char name[10]; /* Name of interface */
- char master[10]; /* Name of Master for Bundling */
- char slave[10]; /* Name of Slave for Bundling */
- char eaz[256]; /* EAZ/MSN */
- char drvid[25]; /* DriverId for Bindings */
- int onhtime; /* Hangup-Timeout */
- int charge; /* Charge-Units */
- int l2_proto; /* Layer-2 protocol */
- int l3_proto; /* Layer-3 protocol */
- int p_encap; /* Encapsulation */
- int exclusive; /* Channel, if bound exclusive */
- int dialmax; /* Dial Retry-Counter */
- int slavedelay; /* Delay until slave starts up */
- int cbdelay; /* Delay before Callback */
- int chargehup; /* Flag: Charge-Hangup */
- int ihup; /* Flag: Hangup-Timeout on incoming line */
- int secure; /* Flag: Secure */
- int callback; /* Flag: Callback */
- int cbhup; /* Flag: Reject Call before Callback */
- int pppbind; /* ippp device for bindings */
- int chargeint; /* Use fixed charge interval length */
- int triggercps; /* BogoCPS needed for triggering slave */
- int dialtimeout; /* Dial-Timeout */
- int dialwait; /* Time to wait after failed dial */
- int dialmode; /* Flag: off / on / auto */
-} isdn_net_ioctl_cfg;
-
-#define ISDN_NET_DIALMODE_MASK 0xC0 /* bits for status */
-#define ISDN_NET_DM_OFF 0x00 /* this interface is stopped */
-#define ISDN_NET_DM_MANUAL 0x40 /* this interface is on (manual) */
-#define ISDN_NET_DM_AUTO 0x80 /* this interface is autodial */
-#define ISDN_NET_DIALMODE(x) ((&(x))->flags & ISDN_NET_DIALMODE_MASK)
-
-#ifdef __KERNEL__
#include <linux/errno.h>
#include <linux/fs.h>
@@ -163,6 +36,7 @@
#include <linux/skbuff.h>
#include <linux/tcp.h>
#include <linux/mutex.h>
+#include <uapi/linux/isdn.h>
#define ISDN_TTY_MAJOR 43
#define ISDN_TTYAUX_MAJOR 44
@@ -595,6 +469,4 @@
extern isdn_dev *dev;
-#endif /* __KERNEL__ */
-
#endif /* __ISDN_H__ */
diff --git a/include/linux/isdn_divertif.h b/include/linux/isdn_divertif.h
index a5a50f5..19ab361 100644
--- a/include/linux/isdn_divertif.h
+++ b/include/linux/isdn_divertif.h
@@ -9,26 +9,12 @@
* of the GNU General Public License, incorporated herein by reference.
*
*/
-
#ifndef _LINUX_ISDN_DIVERTIF_H
#define _LINUX_ISDN_DIVERTIF_H
-/***********************************************************/
-/* magic value is also used to control version information */
-/***********************************************************/
-#define DIVERT_IF_MAGIC 0x25873401
-#define DIVERT_CMD_REG 0x00 /* register command */
-#define DIVERT_CMD_REL 0x01 /* release command */
-#define DIVERT_NO_ERR 0x00 /* return value no error */
-#define DIVERT_CMD_ERR 0x01 /* invalid cmd */
-#define DIVERT_VER_ERR 0x02 /* magic/version invalid */
-#define DIVERT_REG_ERR 0x03 /* module already registered */
-#define DIVERT_REL_ERR 0x04 /* module not registered */
-#define DIVERT_REG_NAME isdn_register_divert
-
-#ifdef __KERNEL__
#include <linux/isdnif.h>
#include <linux/types.h>
+#include <uapi/linux/isdn_divertif.h>
/***************************************************************/
/* structure exchanging data between isdn hl and divert module */
@@ -46,6 +32,4 @@
/* function register */
/*********************/
extern int DIVERT_REG_NAME(isdn_divert_if *);
-#endif
-
#endif /* _LINUX_ISDN_DIVERTIF_H */
diff --git a/include/linux/isdn_ppp.h b/include/linux/isdn_ppp.h
index 8687a7d..d5f62bc 100644
--- a/include/linux/isdn_ppp.h
+++ b/include/linux/isdn_ppp.h
@@ -9,68 +9,16 @@
* of the GNU General Public License, incorporated herein by reference.
*
*/
-
#ifndef _LINUX_ISDN_PPP_H
#define _LINUX_ISDN_PPP_H
-#define CALLTYPE_INCOMING 0x1
-#define CALLTYPE_OUTGOING 0x2
-#define CALLTYPE_CALLBACK 0x4
-
-#define IPPP_VERSION "2.2.0"
-
-struct pppcallinfo
-{
- int calltype;
- unsigned char local_num[64];
- unsigned char remote_num[64];
- int charge_units;
-};
-
-#define PPPIOCGCALLINFO _IOWR('t',128,struct pppcallinfo)
-#define PPPIOCBUNDLE _IOW('t',129,int)
-#define PPPIOCGMPFLAGS _IOR('t',130,int)
-#define PPPIOCSMPFLAGS _IOW('t',131,int)
-#define PPPIOCSMPMTU _IOW('t',132,int)
-#define PPPIOCSMPMRU _IOW('t',133,int)
-#define PPPIOCGCOMPRESSORS _IOR('t',134,unsigned long [8])
-#define PPPIOCSCOMPRESSOR _IOW('t',135,int)
-#define PPPIOCGIFNAME _IOR('t',136, char [IFNAMSIZ] )
-
-
-#define SC_MP_PROT 0x00000200
-#define SC_REJ_MP_PROT 0x00000400
-#define SC_OUT_SHORT_SEQ 0x00000800
-#define SC_IN_SHORT_SEQ 0x00004000
-
-#define SC_DECOMP_ON 0x01
-#define SC_COMP_ON 0x02
-#define SC_DECOMP_DISCARD 0x04
-#define SC_COMP_DISCARD 0x08
-#define SC_LINK_DECOMP_ON 0x10
-#define SC_LINK_COMP_ON 0x20
-#define SC_LINK_DECOMP_DISCARD 0x40
-#define SC_LINK_COMP_DISCARD 0x80
-
-#define ISDN_PPP_COMP_MAX_OPTIONS 16
-
-#define IPPP_COMP_FLAG_XMIT 0x1
-#define IPPP_COMP_FLAG_LINK 0x2
-
-struct isdn_ppp_comp_data {
- int num;
- unsigned char options[ISDN_PPP_COMP_MAX_OPTIONS];
- int optlen;
- int flags;
-};
-
-#ifdef __KERNEL__
#ifdef CONFIG_IPPP_FILTER
#include <linux/filter.h>
#endif
+#include <uapi/linux/isdn_ppp.h>
#define DECOMP_ERR_NOMEM (-10)
@@ -244,5 +192,4 @@
unsigned long compflags;
};
-#endif /* __KERNEL__ */
#endif /* _LINUX_ISDN_PPP_H */
diff --git a/include/linux/isdnif.h b/include/linux/isdnif.h
index b8c23f8..0fc6ff2 100644
--- a/include/linux/isdnif.h
+++ b/include/linux/isdnif.h
@@ -10,51 +10,12 @@
* of the GNU General Public License, incorporated herein by reference.
*
*/
-
#ifndef __ISDNIF_H__
#define __ISDNIF_H__
-/*
- * Values for general protocol-selection
- */
-#define ISDN_PTYPE_UNKNOWN 0 /* Protocol undefined */
-#define ISDN_PTYPE_1TR6 1 /* german 1TR6-protocol */
-#define ISDN_PTYPE_EURO 2 /* EDSS1-protocol */
-#define ISDN_PTYPE_LEASED 3 /* for leased lines */
-#define ISDN_PTYPE_NI1 4 /* US NI-1 protocol */
-#define ISDN_PTYPE_MAX 7 /* Max. 8 Protocols */
-
-/*
- * Values for Layer-2-protocol-selection
- */
-#define ISDN_PROTO_L2_X75I 0 /* X75/LAPB with I-Frames */
-#define ISDN_PROTO_L2_X75UI 1 /* X75/LAPB with UI-Frames */
-#define ISDN_PROTO_L2_X75BUI 2 /* X75/LAPB with UI-Frames */
-#define ISDN_PROTO_L2_HDLC 3 /* HDLC */
-#define ISDN_PROTO_L2_TRANS 4 /* Transparent (Voice) */
-#define ISDN_PROTO_L2_X25DTE 5 /* X25/LAPB DTE mode */
-#define ISDN_PROTO_L2_X25DCE 6 /* X25/LAPB DCE mode */
-#define ISDN_PROTO_L2_V11096 7 /* V.110 bitrate adaption 9600 Baud */
-#define ISDN_PROTO_L2_V11019 8 /* V.110 bitrate adaption 19200 Baud */
-#define ISDN_PROTO_L2_V11038 9 /* V.110 bitrate adaption 38400 Baud */
-#define ISDN_PROTO_L2_MODEM 10 /* Analog Modem on Board */
-#define ISDN_PROTO_L2_FAX 11 /* Fax Group 2/3 */
-#define ISDN_PROTO_L2_HDLC_56K 12 /* HDLC 56k */
-#define ISDN_PROTO_L2_MAX 15 /* Max. 16 Protocols */
-
-/*
- * Values for Layer-3-protocol-selection
- */
-#define ISDN_PROTO_L3_TRANS 0 /* Transparent */
-#define ISDN_PROTO_L3_TRANSDSP 1 /* Transparent with DSP */
-#define ISDN_PROTO_L3_FCLASS2 2 /* Fax Group 2/3 CLASS 2 */
-#define ISDN_PROTO_L3_FCLASS1 3 /* Fax Group 2/3 CLASS 1 */
-#define ISDN_PROTO_L3_MAX 7 /* Max. 8 Protocols */
-
-#ifdef __KERNEL__
-
#include <linux/skbuff.h>
+#include <uapi/linux/isdnif.h>
/***************************************************************************/
/* Extensions made by Werner Cornelius (werner@ikt.de) */
@@ -541,6 +502,4 @@
extern int register_isdn(isdn_if*);
#include <asm/uaccess.h>
-#endif /* __KERNEL__ */
-
#endif /* __ISDNIF_H__ */
diff --git a/include/linux/joystick.h b/include/linux/joystick.h
index 47199b1..cbf2aa9 100644
--- a/include/linux/joystick.h
+++ b/include/linux/joystick.h
@@ -1,12 +1,8 @@
-#ifndef _LINUX_JOYSTICK_H
-#define _LINUX_JOYSTICK_H
-
/*
* Copyright (C) 1996-2000 Vojtech Pavlik
*
* Sponsored by SuSE
*/
-
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -26,113 +22,11 @@
* e-mail - mail your message to <vojtech@suse.cz>, or by paper mail:
* Vojtech Pavlik, Ucitelska 1576, Prague 8, 182 00 Czech Republic
*/
+#ifndef _LINUX_JOYSTICK_H
+#define _LINUX_JOYSTICK_H
-#include <linux/types.h>
-#include <linux/input.h>
+#include <uapi/linux/joystick.h>
-/*
- * Version
- */
-
-#define JS_VERSION 0x020100
-
-/*
- * Types and constants for reading from /dev/js
- */
-
-#define JS_EVENT_BUTTON 0x01 /* button pressed/released */
-#define JS_EVENT_AXIS 0x02 /* joystick moved */
-#define JS_EVENT_INIT 0x80 /* initial state of device */
-
-struct js_event {
- __u32 time; /* event timestamp in milliseconds */
- __s16 value; /* value */
- __u8 type; /* event type */
- __u8 number; /* axis/button number */
-};
-
-/*
- * IOCTL commands for joystick driver
- */
-
-#define JSIOCGVERSION _IOR('j', 0x01, __u32) /* get driver version */
-
-#define JSIOCGAXES _IOR('j', 0x11, __u8) /* get number of axes */
-#define JSIOCGBUTTONS _IOR('j', 0x12, __u8) /* get number of buttons */
-#define JSIOCGNAME(len) _IOC(_IOC_READ, 'j', 0x13, len) /* get identifier string */
-
-#define JSIOCSCORR _IOW('j', 0x21, struct js_corr) /* set correction values */
-#define JSIOCGCORR _IOR('j', 0x22, struct js_corr) /* get correction values */
-
-#define JSIOCSAXMAP _IOW('j', 0x31, __u8[ABS_CNT]) /* set axis mapping */
-#define JSIOCGAXMAP _IOR('j', 0x32, __u8[ABS_CNT]) /* get axis mapping */
-#define JSIOCSBTNMAP _IOW('j', 0x33, __u16[KEY_MAX - BTN_MISC + 1]) /* set button mapping */
-#define JSIOCGBTNMAP _IOR('j', 0x34, __u16[KEY_MAX - BTN_MISC + 1]) /* get button mapping */
-
-/*
- * Types and constants for get/set correction
- */
-
-#define JS_CORR_NONE 0x00 /* returns raw values */
-#define JS_CORR_BROKEN 0x01 /* broken line */
-
-struct js_corr {
- __s32 coef[8];
- __s16 prec;
- __u16 type;
-};
-
-/*
- * v0.x compatibility definitions
- */
-
-#define JS_RETURN sizeof(struct JS_DATA_TYPE)
-#define JS_TRUE 1
-#define JS_FALSE 0
-#define JS_X_0 0x01
-#define JS_Y_0 0x02
-#define JS_X_1 0x04
-#define JS_Y_1 0x08
-#define JS_MAX 2
-
-#define JS_DEF_TIMEOUT 0x1300
-#define JS_DEF_CORR 0
-#define JS_DEF_TIMELIMIT 10L
-
-#define JS_SET_CAL 1
-#define JS_GET_CAL 2
-#define JS_SET_TIMEOUT 3
-#define JS_GET_TIMEOUT 4
-#define JS_SET_TIMELIMIT 5
-#define JS_GET_TIMELIMIT 6
-#define JS_GET_ALL 7
-#define JS_SET_ALL 8
-
-struct JS_DATA_TYPE {
- __s32 buttons;
- __s32 x;
- __s32 y;
-};
-
-struct JS_DATA_SAVE_TYPE_32 {
- __s32 JS_TIMEOUT;
- __s32 BUSY;
- __s32 JS_EXPIRETIME;
- __s32 JS_TIMELIMIT;
- struct JS_DATA_TYPE JS_SAVE;
- struct JS_DATA_TYPE JS_CORR;
-};
-
-struct JS_DATA_SAVE_TYPE_64 {
- __s32 JS_TIMEOUT;
- __s32 BUSY;
- __s64 JS_EXPIRETIME;
- __s64 JS_TIMELIMIT;
- struct JS_DATA_TYPE JS_SAVE;
- struct JS_DATA_TYPE JS_CORR;
-};
-
-#ifdef __KERNEL__
#if BITS_PER_LONG == 64
#define JS_DATA_SAVE_TYPE JS_DATA_SAVE_TYPE_64
#elif BITS_PER_LONG == 32
@@ -140,6 +34,4 @@
#else
#error Unexpected BITS_PER_LONG
#endif
-#endif
-
#endif /* _LINUX_JOYSTICK_H */
diff --git a/include/linux/kd.h b/include/linux/kd.h
index c36d847..25bd17f 100644
--- a/include/linux/kd.h
+++ b/include/linux/kd.h
@@ -1,186 +1,7 @@
#ifndef _LINUX_KD_H
#define _LINUX_KD_H
-#include <linux/types.h>
-#include <linux/compiler.h>
-/* 0x4B is 'K', to avoid collision with termios and vt */
+#include <uapi/linux/kd.h>
-#define GIO_FONT 0x4B60 /* gets font in expanded form */
-#define PIO_FONT 0x4B61 /* use font in expanded form */
-
-#define GIO_FONTX 0x4B6B /* get font using struct consolefontdesc */
-#define PIO_FONTX 0x4B6C /* set font using struct consolefontdesc */
-struct consolefontdesc {
- unsigned short charcount; /* characters in font (256 or 512) */
- unsigned short charheight; /* scan lines per character (1-32) */
- char __user *chardata; /* font data in expanded form */
-};
-
-#define PIO_FONTRESET 0x4B6D /* reset to default font */
-
-#define GIO_CMAP 0x4B70 /* gets colour palette on VGA+ */
-#define PIO_CMAP 0x4B71 /* sets colour palette on VGA+ */
-
-#define KIOCSOUND 0x4B2F /* start sound generation (0 for off) */
-#define KDMKTONE 0x4B30 /* generate tone */
-
-#define KDGETLED 0x4B31 /* return current led state */
-#define KDSETLED 0x4B32 /* set led state [lights, not flags] */
-#define LED_SCR 0x01 /* scroll lock led */
-#define LED_NUM 0x02 /* num lock led */
-#define LED_CAP 0x04 /* caps lock led */
-
-#define KDGKBTYPE 0x4B33 /* get keyboard type */
-#define KB_84 0x01
-#define KB_101 0x02 /* this is what we always answer */
-#define KB_OTHER 0x03
-
-#define KDADDIO 0x4B34 /* add i/o port as valid */
-#define KDDELIO 0x4B35 /* del i/o port as valid */
-#define KDENABIO 0x4B36 /* enable i/o to video board */
-#define KDDISABIO 0x4B37 /* disable i/o to video board */
-
-#define KDSETMODE 0x4B3A /* set text/graphics mode */
-#define KD_TEXT 0x00
-#define KD_GRAPHICS 0x01
-#define KD_TEXT0 0x02 /* obsolete */
-#define KD_TEXT1 0x03 /* obsolete */
-#define KDGETMODE 0x4B3B /* get current mode */
-
-#define KDMAPDISP 0x4B3C /* map display into address space */
-#define KDUNMAPDISP 0x4B3D /* unmap display from address space */
-
-typedef char scrnmap_t;
-#define E_TABSZ 256
-#define GIO_SCRNMAP 0x4B40 /* get screen mapping from kernel */
-#define PIO_SCRNMAP 0x4B41 /* put screen mapping table in kernel */
-#define GIO_UNISCRNMAP 0x4B69 /* get full Unicode screen mapping */
-#define PIO_UNISCRNMAP 0x4B6A /* set full Unicode screen mapping */
-
-#define GIO_UNIMAP 0x4B66 /* get unicode-to-font mapping from kernel */
-struct unipair {
- unsigned short unicode;
- unsigned short fontpos;
-};
-struct unimapdesc {
- unsigned short entry_ct;
- struct unipair __user *entries;
-};
-#define PIO_UNIMAP 0x4B67 /* put unicode-to-font mapping in kernel */
-#define PIO_UNIMAPCLR 0x4B68 /* clear table, possibly advise hash algorithm */
-struct unimapinit {
- unsigned short advised_hashsize; /* 0 if no opinion */
- unsigned short advised_hashstep; /* 0 if no opinion */
- unsigned short advised_hashlevel; /* 0 if no opinion */
-};
-
-#define UNI_DIRECT_BASE 0xF000 /* start of Direct Font Region */
-#define UNI_DIRECT_MASK 0x01FF /* Direct Font Region bitmask */
-
-#define K_RAW 0x00
-#define K_XLATE 0x01
-#define K_MEDIUMRAW 0x02
-#define K_UNICODE 0x03
-#define K_OFF 0x04
-#define KDGKBMODE 0x4B44 /* gets current keyboard mode */
-#define KDSKBMODE 0x4B45 /* sets current keyboard mode */
-
-#define K_METABIT 0x03
-#define K_ESCPREFIX 0x04
-#define KDGKBMETA 0x4B62 /* gets meta key handling mode */
-#define KDSKBMETA 0x4B63 /* sets meta key handling mode */
-
-#define K_SCROLLLOCK 0x01
-#define K_NUMLOCK 0x02
-#define K_CAPSLOCK 0x04
-#define KDGKBLED 0x4B64 /* get led flags (not lights) */
-#define KDSKBLED 0x4B65 /* set led flags (not lights) */
-
-struct kbentry {
- unsigned char kb_table;
- unsigned char kb_index;
- unsigned short kb_value;
-};
-#define K_NORMTAB 0x00
-#define K_SHIFTTAB 0x01
-#define K_ALTTAB 0x02
-#define K_ALTSHIFTTAB 0x03
-
-#define KDGKBENT 0x4B46 /* gets one entry in translation table */
-#define KDSKBENT 0x4B47 /* sets one entry in translation table */
-
-struct kbsentry {
- unsigned char kb_func;
- unsigned char kb_string[512];
-};
-#define KDGKBSENT 0x4B48 /* gets one function key string entry */
-#define KDSKBSENT 0x4B49 /* sets one function key string entry */
-
-struct kbdiacr {
- unsigned char diacr, base, result;
-};
-struct kbdiacrs {
- unsigned int kb_cnt; /* number of entries in following array */
- struct kbdiacr kbdiacr[256]; /* MAX_DIACR from keyboard.h */
-};
-#define KDGKBDIACR 0x4B4A /* read kernel accent table */
-#define KDSKBDIACR 0x4B4B /* write kernel accent table */
-
-struct kbdiacruc {
- unsigned int diacr, base, result;
-};
-struct kbdiacrsuc {
- unsigned int kb_cnt; /* number of entries in following array */
- struct kbdiacruc kbdiacruc[256]; /* MAX_DIACR from keyboard.h */
-};
-#define KDGKBDIACRUC 0x4BFA /* read kernel accent table - UCS */
-#define KDSKBDIACRUC 0x4BFB /* write kernel accent table - UCS */
-
-struct kbkeycode {
- unsigned int scancode, keycode;
-};
-#define KDGETKEYCODE 0x4B4C /* read kernel keycode table entry */
-#define KDSETKEYCODE 0x4B4D /* write kernel keycode table entry */
-
-#define KDSIGACCEPT 0x4B4E /* accept kbd generated signals */
-
-struct kbd_repeat {
- int delay; /* in msec; <= 0: don't change */
- int period; /* in msec; <= 0: don't change */
- /* earlier this field was misnamed "rate" */
-};
-
-#define KDKBDREP 0x4B52 /* set keyboard delay/repeat rate;
- * actually used values are returned */
-
-#define KDFONTOP 0x4B72 /* font operations */
-
-struct console_font_op {
- unsigned int op; /* operation code KD_FONT_OP_* */
- unsigned int flags; /* KD_FONT_FLAG_* */
- unsigned int width, height; /* font size */
- unsigned int charcount;
- unsigned char __user *data; /* font data with height fixed to 32 */
-};
-
-struct console_font {
- unsigned int width, height; /* font size */
- unsigned int charcount;
- unsigned char *data; /* font data with height fixed to 32 */
-};
-
-#define KD_FONT_OP_SET 0 /* Set font */
-#define KD_FONT_OP_GET 1 /* Get font */
-#define KD_FONT_OP_SET_DEFAULT 2 /* Set font to default, data points to name / NULL */
-#define KD_FONT_OP_COPY 3 /* Copy from another console */
-
-#define KD_FONT_FLAG_DONT_RECALC 1 /* Don't recalculate hw charcell size [compat] */
-#ifdef __KERNEL__
#define KD_FONT_FLAG_OLD 0x80000000 /* Invoked via old interface [compat] */
-#endif
-
-/* note: 0x4B00-0x4B4E all have had a value at some time;
- don't reuse for the time being */
-/* note: 0x4B60-0x4B6D, 0x4B70-0x4B72 used above */
-
#endif /* _LINUX_KD_H */
diff --git a/include/linux/kdev_t.h b/include/linux/kdev_t.h
index 2dacab8..c838abe 100644
--- a/include/linux/kdev_t.h
+++ b/include/linux/kdev_t.h
@@ -1,6 +1,8 @@
#ifndef _LINUX_KDEV_T_H
#define _LINUX_KDEV_T_H
-#ifdef __KERNEL__
+
+#include <uapi/linux/kdev_t.h>
+
#define MINORBITS 20
#define MINORMASK ((1U << MINORBITS) - 1)
@@ -87,14 +89,4 @@
return dev & 0x3ffff;
}
-#else /* __KERNEL__ */
-
-/*
-Some programs want their definitions of MAJOR and MINOR and MKDEV
-from the kernel sources. These must be the externally visible ones.
-*/
-#define MAJOR(dev) ((dev)>>8)
-#define MINOR(dev) ((dev) & 0xff)
-#define MKDEV(ma,mi) ((ma)<<8 | (mi))
-#endif /* __KERNEL__ */
#endif
diff --git a/include/linux/kernel-page-flags.h b/include/linux/kernel-page-flags.h
index a1bdf69..546eb6a 100644
--- a/include/linux/kernel-page-flags.h
+++ b/include/linux/kernel-page-flags.h
@@ -1,38 +1,8 @@
#ifndef LINUX_KERNEL_PAGE_FLAGS_H
#define LINUX_KERNEL_PAGE_FLAGS_H
-/*
- * Stable page flag bits exported to user space
- */
+#include <uapi/linux/kernel-page-flags.h>
-#define KPF_LOCKED 0
-#define KPF_ERROR 1
-#define KPF_REFERENCED 2
-#define KPF_UPTODATE 3
-#define KPF_DIRTY 4
-#define KPF_LRU 5
-#define KPF_ACTIVE 6
-#define KPF_SLAB 7
-#define KPF_WRITEBACK 8
-#define KPF_RECLAIM 9
-#define KPF_BUDDY 10
-
-/* 11-20: new additions in 2.6.31 */
-#define KPF_MMAP 11
-#define KPF_ANON 12
-#define KPF_SWAPCACHE 13
-#define KPF_SWAPBACKED 14
-#define KPF_COMPOUND_HEAD 15
-#define KPF_COMPOUND_TAIL 16
-#define KPF_HUGE 17
-#define KPF_UNEVICTABLE 18
-#define KPF_HWPOISON 19
-#define KPF_NOPAGE 20
-
-#define KPF_KSM 21
-#define KPF_THP 22
-
-#ifdef __KERNEL__
/* kernel hacking assistances
* WARNING: subject to change, never rely on them!
@@ -46,6 +16,4 @@
#define KPF_ARCH 38
#define KPF_UNCACHED 39
-#endif /* __KERNEL__ */
-
#endif /* LINUX_KERNEL_PAGE_FLAGS_H */
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index 2451f1f..a123b13 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -1,15 +1,6 @@
#ifndef _LINUX_KERNEL_H
#define _LINUX_KERNEL_H
-#include <linux/sysinfo.h>
-
-/*
- * 'kernel.h' contains some often-used function prototypes etc
- */
-#define __ALIGN_KERNEL(x, a) __ALIGN_KERNEL_MASK(x, (typeof(x))(a) - 1)
-#define __ALIGN_KERNEL_MASK(x, mask) (((x) + (mask)) & ~(mask))
-
-#ifdef __KERNEL__
#include <stdarg.h>
#include <linux/linkage.h>
@@ -22,6 +13,7 @@
#include <linux/printk.h>
#include <linux/dynamic_debug.h>
#include <asm/byteorder.h>
+#include <uapi/linux/kernel.h>
#define USHRT_MAX ((u16)(~0U))
#define SHRT_MAX ((s16)(USHRT_MAX>>1))
@@ -716,6 +708,4 @@
extern int do_sysinfo(struct sysinfo *info);
-#endif /* __KERNEL__ */
-
#endif
diff --git a/include/linux/kernelcapi.h b/include/linux/kernelcapi.h
index 9c26839..9be37da 100644
--- a/include/linux/kernelcapi.h
+++ b/include/linux/kernelcapi.h
@@ -6,49 +6,15 @@
* (c) Copyright 1997 by Carsten Paeth (calle@calle.in-berlin.de)
*
*/
-
#ifndef __KERNELCAPI_H__
#define __KERNELCAPI_H__
-#define CAPI_MAXAPPL 240 /* maximum number of applications */
-#define CAPI_MAXCONTR 32 /* maximum number of controller */
-#define CAPI_MAXDATAWINDOW 8
-
-
-typedef struct kcapi_flagdef {
- int contr;
- int flag;
-} kcapi_flagdef;
-
-typedef struct kcapi_carddef {
- char driver[32];
- unsigned int port;
- unsigned irq;
- unsigned int membase;
- int cardnr;
-} kcapi_carddef;
-
-/* new ioctls >= 10 */
-#define KCAPI_CMD_TRACE 10
-#define KCAPI_CMD_ADDCARD 11 /* OBSOLETE */
-
-/*
- * flag > 2 => trace also data
- * flag & 1 => show trace
- */
-#define KCAPI_TRACE_OFF 0
-#define KCAPI_TRACE_SHORT_NO_DATA 1
-#define KCAPI_TRACE_FULL_NO_DATA 2
-#define KCAPI_TRACE_SHORT 3
-#define KCAPI_TRACE_FULL 4
-
-
-#ifdef __KERNEL__
#include <linux/list.h>
#include <linux/skbuff.h>
#include <linux/workqueue.h>
#include <linux/notifier.h>
+#include <uapi/linux/kernelcapi.h>
struct capi20_appl {
u16 applid;
@@ -150,6 +116,4 @@
CapiCallGivenToOtherApplication = 0x3304,
} CAPI_REASON;
-#endif /* __KERNEL__ */
-
#endif /* __KERNELCAPI_H__ */
diff --git a/include/linux/kexec.h b/include/linux/kexec.h
index 37c5f726..d0b8458 100644
--- a/include/linux/kexec.h
+++ b/include/linux/kexec.h
@@ -1,57 +1,8 @@
#ifndef LINUX_KEXEC_H
#define LINUX_KEXEC_H
-/* kexec system call - It loads the new kernel to boot into.
- * kexec does not sync, or unmount filesystems so if you need
- * that to happen you need to do that yourself.
- */
+#include <uapi/linux/kexec.h>
-#include <linux/types.h>
-
-/* kexec flags for different usage scenarios */
-#define KEXEC_ON_CRASH 0x00000001
-#define KEXEC_PRESERVE_CONTEXT 0x00000002
-#define KEXEC_ARCH_MASK 0xffff0000
-
-/* These values match the ELF architecture values.
- * Unless there is a good reason that should continue to be the case.
- */
-#define KEXEC_ARCH_DEFAULT ( 0 << 16)
-#define KEXEC_ARCH_386 ( 3 << 16)
-#define KEXEC_ARCH_X86_64 (62 << 16)
-#define KEXEC_ARCH_PPC (20 << 16)
-#define KEXEC_ARCH_PPC64 (21 << 16)
-#define KEXEC_ARCH_IA_64 (50 << 16)
-#define KEXEC_ARCH_ARM (40 << 16)
-#define KEXEC_ARCH_S390 (22 << 16)
-#define KEXEC_ARCH_SH (42 << 16)
-#define KEXEC_ARCH_MIPS_LE (10 << 16)
-#define KEXEC_ARCH_MIPS ( 8 << 16)
-
-/* The artificial cap on the number of segments passed to kexec_load. */
-#define KEXEC_SEGMENT_MAX 16
-
-#ifndef __KERNEL__
-/*
- * This structure is used to hold the arguments that are used when
- * loading kernel binaries.
- */
-struct kexec_segment {
- const void *buf;
- size_t bufsz;
- const void *mem;
- size_t memsz;
-};
-
-/* Load a new kernel image as described by the kexec_segment array
- * consisting of passed number of segments at the entry-point address.
- * The flags allow different useage types.
- */
-extern int kexec_load(void *, size_t, struct kexec_segment *,
- unsigned long int);
-#endif /* __KERNEL__ */
-
-#ifdef __KERNEL__
#ifdef CONFIG_KEXEC
#include <linux/list.h>
#include <linux/linkage.h>
@@ -258,5 +209,4 @@
static inline void crash_kexec(struct pt_regs *regs) { }
static inline int kexec_should_crash(struct task_struct *p) { return 0; }
#endif /* CONFIG_KEXEC */
-#endif /* __KERNEL__ */
#endif /* LINUX_KEXEC_H */
diff --git a/include/linux/keyboard.h b/include/linux/keyboard.h
index 86e5214..131ed51 100644
--- a/include/linux/keyboard.h
+++ b/include/linux/keyboard.h
@@ -1,28 +1,8 @@
#ifndef __LINUX_KEYBOARD_H
#define __LINUX_KEYBOARD_H
-#include <linux/wait.h>
+#include <uapi/linux/keyboard.h>
-#define KG_SHIFT 0
-#define KG_CTRL 2
-#define KG_ALT 3
-#define KG_ALTGR 1
-#define KG_SHIFTL 4
-#define KG_KANASHIFT 4
-#define KG_SHIFTR 5
-#define KG_CTRLL 6
-#define KG_CTRLR 7
-#define KG_CAPSSHIFT 8
-
-#define NR_SHIFT 9
-
-#define NR_KEYS 256
-#define MAX_NR_KEYMAPS 256
-/* This means 128Kb if all keymaps are allocated. Only the superuser
- may increase the number of keymaps beyond MAX_NR_OF_USER_KEYMAPS. */
-#define MAX_NR_OF_USER_KEYMAPS 256 /* should be at least 7 */
-
-#ifdef __KERNEL__
struct notifier_block;
extern unsigned short *key_maps[MAX_NR_KEYMAPS];
extern unsigned short plain_map[NR_KEYS];
@@ -38,422 +18,3 @@
extern int register_keyboard_notifier(struct notifier_block *nb);
extern int unregister_keyboard_notifier(struct notifier_block *nb);
#endif
-
-#define MAX_NR_FUNC 256 /* max nr of strings assigned to keys */
-
-#define KT_LATIN 0 /* we depend on this being zero */
-#define KT_LETTER 11 /* symbol that can be acted upon by CapsLock */
-#define KT_FN 1
-#define KT_SPEC 2
-#define KT_PAD 3
-#define KT_DEAD 4
-#define KT_CONS 5
-#define KT_CUR 6
-#define KT_SHIFT 7
-#define KT_META 8
-#define KT_ASCII 9
-#define KT_LOCK 10
-#define KT_SLOCK 12
-#define KT_DEAD2 13
-#define KT_BRL 14
-
-#define K(t,v) (((t)<<8)|(v))
-#define KTYP(x) ((x) >> 8)
-#define KVAL(x) ((x) & 0xff)
-
-#define K_F1 K(KT_FN,0)
-#define K_F2 K(KT_FN,1)
-#define K_F3 K(KT_FN,2)
-#define K_F4 K(KT_FN,3)
-#define K_F5 K(KT_FN,4)
-#define K_F6 K(KT_FN,5)
-#define K_F7 K(KT_FN,6)
-#define K_F8 K(KT_FN,7)
-#define K_F9 K(KT_FN,8)
-#define K_F10 K(KT_FN,9)
-#define K_F11 K(KT_FN,10)
-#define K_F12 K(KT_FN,11)
-#define K_F13 K(KT_FN,12)
-#define K_F14 K(KT_FN,13)
-#define K_F15 K(KT_FN,14)
-#define K_F16 K(KT_FN,15)
-#define K_F17 K(KT_FN,16)
-#define K_F18 K(KT_FN,17)
-#define K_F19 K(KT_FN,18)
-#define K_F20 K(KT_FN,19)
-#define K_FIND K(KT_FN,20)
-#define K_INSERT K(KT_FN,21)
-#define K_REMOVE K(KT_FN,22)
-#define K_SELECT K(KT_FN,23)
-#define K_PGUP K(KT_FN,24) /* PGUP is a synonym for PRIOR */
-#define K_PGDN K(KT_FN,25) /* PGDN is a synonym for NEXT */
-#define K_MACRO K(KT_FN,26)
-#define K_HELP K(KT_FN,27)
-#define K_DO K(KT_FN,28)
-#define K_PAUSE K(KT_FN,29)
-#define K_F21 K(KT_FN,30)
-#define K_F22 K(KT_FN,31)
-#define K_F23 K(KT_FN,32)
-#define K_F24 K(KT_FN,33)
-#define K_F25 K(KT_FN,34)
-#define K_F26 K(KT_FN,35)
-#define K_F27 K(KT_FN,36)
-#define K_F28 K(KT_FN,37)
-#define K_F29 K(KT_FN,38)
-#define K_F30 K(KT_FN,39)
-#define K_F31 K(KT_FN,40)
-#define K_F32 K(KT_FN,41)
-#define K_F33 K(KT_FN,42)
-#define K_F34 K(KT_FN,43)
-#define K_F35 K(KT_FN,44)
-#define K_F36 K(KT_FN,45)
-#define K_F37 K(KT_FN,46)
-#define K_F38 K(KT_FN,47)
-#define K_F39 K(KT_FN,48)
-#define K_F40 K(KT_FN,49)
-#define K_F41 K(KT_FN,50)
-#define K_F42 K(KT_FN,51)
-#define K_F43 K(KT_FN,52)
-#define K_F44 K(KT_FN,53)
-#define K_F45 K(KT_FN,54)
-#define K_F46 K(KT_FN,55)
-#define K_F47 K(KT_FN,56)
-#define K_F48 K(KT_FN,57)
-#define K_F49 K(KT_FN,58)
-#define K_F50 K(KT_FN,59)
-#define K_F51 K(KT_FN,60)
-#define K_F52 K(KT_FN,61)
-#define K_F53 K(KT_FN,62)
-#define K_F54 K(KT_FN,63)
-#define K_F55 K(KT_FN,64)
-#define K_F56 K(KT_FN,65)
-#define K_F57 K(KT_FN,66)
-#define K_F58 K(KT_FN,67)
-#define K_F59 K(KT_FN,68)
-#define K_F60 K(KT_FN,69)
-#define K_F61 K(KT_FN,70)
-#define K_F62 K(KT_FN,71)
-#define K_F63 K(KT_FN,72)
-#define K_F64 K(KT_FN,73)
-#define K_F65 K(KT_FN,74)
-#define K_F66 K(KT_FN,75)
-#define K_F67 K(KT_FN,76)
-#define K_F68 K(KT_FN,77)
-#define K_F69 K(KT_FN,78)
-#define K_F70 K(KT_FN,79)
-#define K_F71 K(KT_FN,80)
-#define K_F72 K(KT_FN,81)
-#define K_F73 K(KT_FN,82)
-#define K_F74 K(KT_FN,83)
-#define K_F75 K(KT_FN,84)
-#define K_F76 K(KT_FN,85)
-#define K_F77 K(KT_FN,86)
-#define K_F78 K(KT_FN,87)
-#define K_F79 K(KT_FN,88)
-#define K_F80 K(KT_FN,89)
-#define K_F81 K(KT_FN,90)
-#define K_F82 K(KT_FN,91)
-#define K_F83 K(KT_FN,92)
-#define K_F84 K(KT_FN,93)
-#define K_F85 K(KT_FN,94)
-#define K_F86 K(KT_FN,95)
-#define K_F87 K(KT_FN,96)
-#define K_F88 K(KT_FN,97)
-#define K_F89 K(KT_FN,98)
-#define K_F90 K(KT_FN,99)
-#define K_F91 K(KT_FN,100)
-#define K_F92 K(KT_FN,101)
-#define K_F93 K(KT_FN,102)
-#define K_F94 K(KT_FN,103)
-#define K_F95 K(KT_FN,104)
-#define K_F96 K(KT_FN,105)
-#define K_F97 K(KT_FN,106)
-#define K_F98 K(KT_FN,107)
-#define K_F99 K(KT_FN,108)
-#define K_F100 K(KT_FN,109)
-#define K_F101 K(KT_FN,110)
-#define K_F102 K(KT_FN,111)
-#define K_F103 K(KT_FN,112)
-#define K_F104 K(KT_FN,113)
-#define K_F105 K(KT_FN,114)
-#define K_F106 K(KT_FN,115)
-#define K_F107 K(KT_FN,116)
-#define K_F108 K(KT_FN,117)
-#define K_F109 K(KT_FN,118)
-#define K_F110 K(KT_FN,119)
-#define K_F111 K(KT_FN,120)
-#define K_F112 K(KT_FN,121)
-#define K_F113 K(KT_FN,122)
-#define K_F114 K(KT_FN,123)
-#define K_F115 K(KT_FN,124)
-#define K_F116 K(KT_FN,125)
-#define K_F117 K(KT_FN,126)
-#define K_F118 K(KT_FN,127)
-#define K_F119 K(KT_FN,128)
-#define K_F120 K(KT_FN,129)
-#define K_F121 K(KT_FN,130)
-#define K_F122 K(KT_FN,131)
-#define K_F123 K(KT_FN,132)
-#define K_F124 K(KT_FN,133)
-#define K_F125 K(KT_FN,134)
-#define K_F126 K(KT_FN,135)
-#define K_F127 K(KT_FN,136)
-#define K_F128 K(KT_FN,137)
-#define K_F129 K(KT_FN,138)
-#define K_F130 K(KT_FN,139)
-#define K_F131 K(KT_FN,140)
-#define K_F132 K(KT_FN,141)
-#define K_F133 K(KT_FN,142)
-#define K_F134 K(KT_FN,143)
-#define K_F135 K(KT_FN,144)
-#define K_F136 K(KT_FN,145)
-#define K_F137 K(KT_FN,146)
-#define K_F138 K(KT_FN,147)
-#define K_F139 K(KT_FN,148)
-#define K_F140 K(KT_FN,149)
-#define K_F141 K(KT_FN,150)
-#define K_F142 K(KT_FN,151)
-#define K_F143 K(KT_FN,152)
-#define K_F144 K(KT_FN,153)
-#define K_F145 K(KT_FN,154)
-#define K_F146 K(KT_FN,155)
-#define K_F147 K(KT_FN,156)
-#define K_F148 K(KT_FN,157)
-#define K_F149 K(KT_FN,158)
-#define K_F150 K(KT_FN,159)
-#define K_F151 K(KT_FN,160)
-#define K_F152 K(KT_FN,161)
-#define K_F153 K(KT_FN,162)
-#define K_F154 K(KT_FN,163)
-#define K_F155 K(KT_FN,164)
-#define K_F156 K(KT_FN,165)
-#define K_F157 K(KT_FN,166)
-#define K_F158 K(KT_FN,167)
-#define K_F159 K(KT_FN,168)
-#define K_F160 K(KT_FN,169)
-#define K_F161 K(KT_FN,170)
-#define K_F162 K(KT_FN,171)
-#define K_F163 K(KT_FN,172)
-#define K_F164 K(KT_FN,173)
-#define K_F165 K(KT_FN,174)
-#define K_F166 K(KT_FN,175)
-#define K_F167 K(KT_FN,176)
-#define K_F168 K(KT_FN,177)
-#define K_F169 K(KT_FN,178)
-#define K_F170 K(KT_FN,179)
-#define K_F171 K(KT_FN,180)
-#define K_F172 K(KT_FN,181)
-#define K_F173 K(KT_FN,182)
-#define K_F174 K(KT_FN,183)
-#define K_F175 K(KT_FN,184)
-#define K_F176 K(KT_FN,185)
-#define K_F177 K(KT_FN,186)
-#define K_F178 K(KT_FN,187)
-#define K_F179 K(KT_FN,188)
-#define K_F180 K(KT_FN,189)
-#define K_F181 K(KT_FN,190)
-#define K_F182 K(KT_FN,191)
-#define K_F183 K(KT_FN,192)
-#define K_F184 K(KT_FN,193)
-#define K_F185 K(KT_FN,194)
-#define K_F186 K(KT_FN,195)
-#define K_F187 K(KT_FN,196)
-#define K_F188 K(KT_FN,197)
-#define K_F189 K(KT_FN,198)
-#define K_F190 K(KT_FN,199)
-#define K_F191 K(KT_FN,200)
-#define K_F192 K(KT_FN,201)
-#define K_F193 K(KT_FN,202)
-#define K_F194 K(KT_FN,203)
-#define K_F195 K(KT_FN,204)
-#define K_F196 K(KT_FN,205)
-#define K_F197 K(KT_FN,206)
-#define K_F198 K(KT_FN,207)
-#define K_F199 K(KT_FN,208)
-#define K_F200 K(KT_FN,209)
-#define K_F201 K(KT_FN,210)
-#define K_F202 K(KT_FN,211)
-#define K_F203 K(KT_FN,212)
-#define K_F204 K(KT_FN,213)
-#define K_F205 K(KT_FN,214)
-#define K_F206 K(KT_FN,215)
-#define K_F207 K(KT_FN,216)
-#define K_F208 K(KT_FN,217)
-#define K_F209 K(KT_FN,218)
-#define K_F210 K(KT_FN,219)
-#define K_F211 K(KT_FN,220)
-#define K_F212 K(KT_FN,221)
-#define K_F213 K(KT_FN,222)
-#define K_F214 K(KT_FN,223)
-#define K_F215 K(KT_FN,224)
-#define K_F216 K(KT_FN,225)
-#define K_F217 K(KT_FN,226)
-#define K_F218 K(KT_FN,227)
-#define K_F219 K(KT_FN,228)
-#define K_F220 K(KT_FN,229)
-#define K_F221 K(KT_FN,230)
-#define K_F222 K(KT_FN,231)
-#define K_F223 K(KT_FN,232)
-#define K_F224 K(KT_FN,233)
-#define K_F225 K(KT_FN,234)
-#define K_F226 K(KT_FN,235)
-#define K_F227 K(KT_FN,236)
-#define K_F228 K(KT_FN,237)
-#define K_F229 K(KT_FN,238)
-#define K_F230 K(KT_FN,239)
-#define K_F231 K(KT_FN,240)
-#define K_F232 K(KT_FN,241)
-#define K_F233 K(KT_FN,242)
-#define K_F234 K(KT_FN,243)
-#define K_F235 K(KT_FN,244)
-#define K_F236 K(KT_FN,245)
-#define K_F237 K(KT_FN,246)
-#define K_F238 K(KT_FN,247)
-#define K_F239 K(KT_FN,248)
-#define K_F240 K(KT_FN,249)
-#define K_F241 K(KT_FN,250)
-#define K_F242 K(KT_FN,251)
-#define K_F243 K(KT_FN,252)
-#define K_F244 K(KT_FN,253)
-#define K_F245 K(KT_FN,254)
-#define K_UNDO K(KT_FN,255)
-
-
-#define K_HOLE K(KT_SPEC,0)
-#define K_ENTER K(KT_SPEC,1)
-#define K_SH_REGS K(KT_SPEC,2)
-#define K_SH_MEM K(KT_SPEC,3)
-#define K_SH_STAT K(KT_SPEC,4)
-#define K_BREAK K(KT_SPEC,5)
-#define K_CONS K(KT_SPEC,6)
-#define K_CAPS K(KT_SPEC,7)
-#define K_NUM K(KT_SPEC,8)
-#define K_HOLD K(KT_SPEC,9)
-#define K_SCROLLFORW K(KT_SPEC,10)
-#define K_SCROLLBACK K(KT_SPEC,11)
-#define K_BOOT K(KT_SPEC,12)
-#define K_CAPSON K(KT_SPEC,13)
-#define K_COMPOSE K(KT_SPEC,14)
-#define K_SAK K(KT_SPEC,15)
-#define K_DECRCONSOLE K(KT_SPEC,16)
-#define K_INCRCONSOLE K(KT_SPEC,17)
-#define K_SPAWNCONSOLE K(KT_SPEC,18)
-#define K_BARENUMLOCK K(KT_SPEC,19)
-
-#define K_ALLOCATED K(KT_SPEC,126) /* dynamically allocated keymap */
-#define K_NOSUCHMAP K(KT_SPEC,127) /* returned by KDGKBENT */
-
-#define K_P0 K(KT_PAD,0)
-#define K_P1 K(KT_PAD,1)
-#define K_P2 K(KT_PAD,2)
-#define K_P3 K(KT_PAD,3)
-#define K_P4 K(KT_PAD,4)
-#define K_P5 K(KT_PAD,5)
-#define K_P6 K(KT_PAD,6)
-#define K_P7 K(KT_PAD,7)
-#define K_P8 K(KT_PAD,8)
-#define K_P9 K(KT_PAD,9)
-#define K_PPLUS K(KT_PAD,10) /* key-pad plus */
-#define K_PMINUS K(KT_PAD,11) /* key-pad minus */
-#define K_PSTAR K(KT_PAD,12) /* key-pad asterisk (star) */
-#define K_PSLASH K(KT_PAD,13) /* key-pad slash */
-#define K_PENTER K(KT_PAD,14) /* key-pad enter */
-#define K_PCOMMA K(KT_PAD,15) /* key-pad comma: kludge... */
-#define K_PDOT K(KT_PAD,16) /* key-pad dot (period): kludge... */
-#define K_PPLUSMINUS K(KT_PAD,17) /* key-pad plus/minus */
-#define K_PPARENL K(KT_PAD,18) /* key-pad left parenthesis */
-#define K_PPARENR K(KT_PAD,19) /* key-pad right parenthesis */
-
-#define NR_PAD 20
-
-#define K_DGRAVE K(KT_DEAD,0)
-#define K_DACUTE K(KT_DEAD,1)
-#define K_DCIRCM K(KT_DEAD,2)
-#define K_DTILDE K(KT_DEAD,3)
-#define K_DDIERE K(KT_DEAD,4)
-#define K_DCEDIL K(KT_DEAD,5)
-
-#define NR_DEAD 6
-
-#define K_DOWN K(KT_CUR,0)
-#define K_LEFT K(KT_CUR,1)
-#define K_RIGHT K(KT_CUR,2)
-#define K_UP K(KT_CUR,3)
-
-#define K_SHIFT K(KT_SHIFT,KG_SHIFT)
-#define K_CTRL K(KT_SHIFT,KG_CTRL)
-#define K_ALT K(KT_SHIFT,KG_ALT)
-#define K_ALTGR K(KT_SHIFT,KG_ALTGR)
-#define K_SHIFTL K(KT_SHIFT,KG_SHIFTL)
-#define K_SHIFTR K(KT_SHIFT,KG_SHIFTR)
-#define K_CTRLL K(KT_SHIFT,KG_CTRLL)
-#define K_CTRLR K(KT_SHIFT,KG_CTRLR)
-#define K_CAPSSHIFT K(KT_SHIFT,KG_CAPSSHIFT)
-
-#define K_ASC0 K(KT_ASCII,0)
-#define K_ASC1 K(KT_ASCII,1)
-#define K_ASC2 K(KT_ASCII,2)
-#define K_ASC3 K(KT_ASCII,3)
-#define K_ASC4 K(KT_ASCII,4)
-#define K_ASC5 K(KT_ASCII,5)
-#define K_ASC6 K(KT_ASCII,6)
-#define K_ASC7 K(KT_ASCII,7)
-#define K_ASC8 K(KT_ASCII,8)
-#define K_ASC9 K(KT_ASCII,9)
-#define K_HEX0 K(KT_ASCII,10)
-#define K_HEX1 K(KT_ASCII,11)
-#define K_HEX2 K(KT_ASCII,12)
-#define K_HEX3 K(KT_ASCII,13)
-#define K_HEX4 K(KT_ASCII,14)
-#define K_HEX5 K(KT_ASCII,15)
-#define K_HEX6 K(KT_ASCII,16)
-#define K_HEX7 K(KT_ASCII,17)
-#define K_HEX8 K(KT_ASCII,18)
-#define K_HEX9 K(KT_ASCII,19)
-#define K_HEXa K(KT_ASCII,20)
-#define K_HEXb K(KT_ASCII,21)
-#define K_HEXc K(KT_ASCII,22)
-#define K_HEXd K(KT_ASCII,23)
-#define K_HEXe K(KT_ASCII,24)
-#define K_HEXf K(KT_ASCII,25)
-
-#define NR_ASCII 26
-
-#define K_SHIFTLOCK K(KT_LOCK,KG_SHIFT)
-#define K_CTRLLOCK K(KT_LOCK,KG_CTRL)
-#define K_ALTLOCK K(KT_LOCK,KG_ALT)
-#define K_ALTGRLOCK K(KT_LOCK,KG_ALTGR)
-#define K_SHIFTLLOCK K(KT_LOCK,KG_SHIFTL)
-#define K_SHIFTRLOCK K(KT_LOCK,KG_SHIFTR)
-#define K_CTRLLLOCK K(KT_LOCK,KG_CTRLL)
-#define K_CTRLRLOCK K(KT_LOCK,KG_CTRLR)
-#define K_CAPSSHIFTLOCK K(KT_LOCK,KG_CAPSSHIFT)
-
-#define K_SHIFT_SLOCK K(KT_SLOCK,KG_SHIFT)
-#define K_CTRL_SLOCK K(KT_SLOCK,KG_CTRL)
-#define K_ALT_SLOCK K(KT_SLOCK,KG_ALT)
-#define K_ALTGR_SLOCK K(KT_SLOCK,KG_ALTGR)
-#define K_SHIFTL_SLOCK K(KT_SLOCK,KG_SHIFTL)
-#define K_SHIFTR_SLOCK K(KT_SLOCK,KG_SHIFTR)
-#define K_CTRLL_SLOCK K(KT_SLOCK,KG_CTRLL)
-#define K_CTRLR_SLOCK K(KT_SLOCK,KG_CTRLR)
-#define K_CAPSSHIFT_SLOCK K(KT_SLOCK,KG_CAPSSHIFT)
-
-#define NR_LOCK 9
-
-#define K_BRL_BLANK K(KT_BRL, 0)
-#define K_BRL_DOT1 K(KT_BRL, 1)
-#define K_BRL_DOT2 K(KT_BRL, 2)
-#define K_BRL_DOT3 K(KT_BRL, 3)
-#define K_BRL_DOT4 K(KT_BRL, 4)
-#define K_BRL_DOT5 K(KT_BRL, 5)
-#define K_BRL_DOT6 K(KT_BRL, 6)
-#define K_BRL_DOT7 K(KT_BRL, 7)
-#define K_BRL_DOT8 K(KT_BRL, 8)
-#define K_BRL_DOT9 K(KT_BRL, 9)
-#define K_BRL_DOT10 K(KT_BRL, 10)
-
-#define NR_BRL 11
-
-#define MAX_DIACR 256
-#endif
diff --git a/include/linux/kvm_para.h b/include/linux/kvm_para.h
index ff476dd..00a97bb 100644
--- a/include/linux/kvm_para.h
+++ b/include/linux/kvm_para.h
@@ -1,31 +1,8 @@
#ifndef __LINUX_KVM_PARA_H
#define __LINUX_KVM_PARA_H
-/*
- * This header file provides a method for making a hypercall to the host
- * Architectures should define:
- * - kvm_hypercall0, kvm_hypercall1...
- * - kvm_arch_para_features
- * - kvm_para_available
- */
+#include <uapi/linux/kvm_para.h>
-/* Return values for hypercalls */
-#define KVM_ENOSYS 1000
-#define KVM_EFAULT EFAULT
-#define KVM_E2BIG E2BIG
-#define KVM_EPERM EPERM
-
-#define KVM_HC_VAPIC_POLL_IRQ 1
-#define KVM_HC_MMU_OP 2
-#define KVM_HC_FEATURES 3
-#define KVM_HC_PPC_MAP_MAGIC_PAGE 4
-
-/*
- * hypercalls use architecture specific
- */
-#include <asm/kvm_para.h>
-
-#ifdef __KERNEL__
static inline int kvm_para_has_feature(unsigned int feature)
{
@@ -33,5 +10,4 @@
return 1;
return 0;
}
-#endif /* __KERNEL__ */
#endif /* __LINUX_KVM_PARA_H */
diff --git a/include/linux/l2tp.h b/include/linux/l2tp.h
index 7eab668..bffdb96 100644
--- a/include/linux/l2tp.h
+++ b/include/linux/l2tp.h
@@ -3,181 +3,11 @@
*
* Author: James Chapman <jchapman@katalix.com>
*/
-
#ifndef _LINUX_L2TP_H_
#define _LINUX_L2TP_H_
-#include <linux/types.h>
-#include <linux/socket.h>
-#ifdef __KERNEL__
#include <linux/in.h>
#include <linux/in6.h>
-#else
-#include <netinet/in.h>
-#endif
-
-#define IPPROTO_L2TP 115
-
-/**
- * struct sockaddr_l2tpip - the sockaddr structure for L2TP-over-IP sockets
- * @l2tp_family: address family number AF_L2TPIP.
- * @l2tp_addr: protocol specific address information
- * @l2tp_conn_id: connection id of tunnel
- */
-#define __SOCK_SIZE__ 16 /* sizeof(struct sockaddr) */
-struct sockaddr_l2tpip {
- /* The first fields must match struct sockaddr_in */
- __kernel_sa_family_t l2tp_family; /* AF_INET */
- __be16 l2tp_unused; /* INET port number (unused) */
- struct in_addr l2tp_addr; /* Internet address */
-
- __u32 l2tp_conn_id; /* Connection ID of tunnel */
-
- /* Pad to size of `struct sockaddr'. */
- unsigned char __pad[sizeof(struct sockaddr) -
- sizeof(__kernel_sa_family_t) -
- sizeof(__be16) - sizeof(struct in_addr) -
- sizeof(__u32)];
-};
-
-/**
- * struct sockaddr_l2tpip6 - the sockaddr structure for L2TP-over-IPv6 sockets
- * @l2tp_family: address family number AF_L2TPIP.
- * @l2tp_addr: protocol specific address information
- * @l2tp_conn_id: connection id of tunnel
- */
-struct sockaddr_l2tpip6 {
- /* The first fields must match struct sockaddr_in6 */
- __kernel_sa_family_t l2tp_family; /* AF_INET6 */
- __be16 l2tp_unused; /* INET port number (unused) */
- __be32 l2tp_flowinfo; /* IPv6 flow information */
- struct in6_addr l2tp_addr; /* IPv6 address */
- __u32 l2tp_scope_id; /* scope id (new in RFC2553) */
- __u32 l2tp_conn_id; /* Connection ID of tunnel */
-};
-
-/*****************************************************************************
- * NETLINK_GENERIC netlink family.
- *****************************************************************************/
-
-/*
- * Commands.
- * Valid TLVs of each command are:-
- * TUNNEL_CREATE - CONN_ID, pw_type, netns, ifname, ipinfo, udpinfo, udpcsum, vlanid
- * TUNNEL_DELETE - CONN_ID
- * TUNNEL_MODIFY - CONN_ID, udpcsum
- * TUNNEL_GETSTATS - CONN_ID, (stats)
- * TUNNEL_GET - CONN_ID, (...)
- * SESSION_CREATE - SESSION_ID, PW_TYPE, offset, data_seq, cookie, peer_cookie, offset, l2spec
- * SESSION_DELETE - SESSION_ID
- * SESSION_MODIFY - SESSION_ID, data_seq
- * SESSION_GET - SESSION_ID, (...)
- * SESSION_GETSTATS - SESSION_ID, (stats)
- *
- */
-enum {
- L2TP_CMD_NOOP,
- L2TP_CMD_TUNNEL_CREATE,
- L2TP_CMD_TUNNEL_DELETE,
- L2TP_CMD_TUNNEL_MODIFY,
- L2TP_CMD_TUNNEL_GET,
- L2TP_CMD_SESSION_CREATE,
- L2TP_CMD_SESSION_DELETE,
- L2TP_CMD_SESSION_MODIFY,
- L2TP_CMD_SESSION_GET,
- __L2TP_CMD_MAX,
-};
-
-#define L2TP_CMD_MAX (__L2TP_CMD_MAX - 1)
-
-/*
- * ATTR types defined for L2TP
- */
-enum {
- L2TP_ATTR_NONE, /* no data */
- L2TP_ATTR_PW_TYPE, /* u16, enum l2tp_pwtype */
- L2TP_ATTR_ENCAP_TYPE, /* u16, enum l2tp_encap_type */
- L2TP_ATTR_OFFSET, /* u16 */
- L2TP_ATTR_DATA_SEQ, /* u16 */
- L2TP_ATTR_L2SPEC_TYPE, /* u8, enum l2tp_l2spec_type */
- L2TP_ATTR_L2SPEC_LEN, /* u8, enum l2tp_l2spec_type */
- L2TP_ATTR_PROTO_VERSION, /* u8 */
- L2TP_ATTR_IFNAME, /* string */
- L2TP_ATTR_CONN_ID, /* u32 */
- L2TP_ATTR_PEER_CONN_ID, /* u32 */
- L2TP_ATTR_SESSION_ID, /* u32 */
- L2TP_ATTR_PEER_SESSION_ID, /* u32 */
- L2TP_ATTR_UDP_CSUM, /* u8 */
- L2TP_ATTR_VLAN_ID, /* u16 */
- L2TP_ATTR_COOKIE, /* 0, 4 or 8 bytes */
- L2TP_ATTR_PEER_COOKIE, /* 0, 4 or 8 bytes */
- L2TP_ATTR_DEBUG, /* u32 */
- L2TP_ATTR_RECV_SEQ, /* u8 */
- L2TP_ATTR_SEND_SEQ, /* u8 */
- L2TP_ATTR_LNS_MODE, /* u8 */
- L2TP_ATTR_USING_IPSEC, /* u8 */
- L2TP_ATTR_RECV_TIMEOUT, /* msec */
- L2TP_ATTR_FD, /* int */
- L2TP_ATTR_IP_SADDR, /* u32 */
- L2TP_ATTR_IP_DADDR, /* u32 */
- L2TP_ATTR_UDP_SPORT, /* u16 */
- L2TP_ATTR_UDP_DPORT, /* u16 */
- L2TP_ATTR_MTU, /* u16 */
- L2TP_ATTR_MRU, /* u16 */
- L2TP_ATTR_STATS, /* nested */
- L2TP_ATTR_IP6_SADDR, /* struct in6_addr */
- L2TP_ATTR_IP6_DADDR, /* struct in6_addr */
- __L2TP_ATTR_MAX,
-};
-
-#define L2TP_ATTR_MAX (__L2TP_ATTR_MAX - 1)
-
-/* Nested in L2TP_ATTR_STATS */
-enum {
- L2TP_ATTR_STATS_NONE, /* no data */
- L2TP_ATTR_TX_PACKETS, /* u64 */
- L2TP_ATTR_TX_BYTES, /* u64 */
- L2TP_ATTR_TX_ERRORS, /* u64 */
- L2TP_ATTR_RX_PACKETS, /* u64 */
- L2TP_ATTR_RX_BYTES, /* u64 */
- L2TP_ATTR_RX_SEQ_DISCARDS, /* u64 */
- L2TP_ATTR_RX_OOS_PACKETS, /* u64 */
- L2TP_ATTR_RX_ERRORS, /* u64 */
- __L2TP_ATTR_STATS_MAX,
-};
-
-#define L2TP_ATTR_STATS_MAX (__L2TP_ATTR_STATS_MAX - 1)
-
-enum l2tp_pwtype {
- L2TP_PWTYPE_NONE = 0x0000,
- L2TP_PWTYPE_ETH_VLAN = 0x0004,
- L2TP_PWTYPE_ETH = 0x0005,
- L2TP_PWTYPE_PPP = 0x0007,
- L2TP_PWTYPE_PPP_AC = 0x0008,
- L2TP_PWTYPE_IP = 0x000b,
- __L2TP_PWTYPE_MAX
-};
-
-enum l2tp_l2spec_type {
- L2TP_L2SPECTYPE_NONE,
- L2TP_L2SPECTYPE_DEFAULT,
-};
-
-enum l2tp_encap_type {
- L2TP_ENCAPTYPE_UDP,
- L2TP_ENCAPTYPE_IP,
-};
-
-enum l2tp_seqmode {
- L2TP_SEQ_NONE = 0,
- L2TP_SEQ_IP = 1,
- L2TP_SEQ_ALL = 2,
-};
-
-/*
- * NETLINK_GENERIC related info
- */
-#define L2TP_GENL_NAME "l2tp"
-#define L2TP_GENL_VERSION 0x1
+#include <uapi/linux/l2tp.h>
#endif
diff --git a/include/linux/llc.h b/include/linux/llc.h
index a2418ae..b965314 100644
--- a/include/linux/llc.h
+++ b/include/linux/llc.h
@@ -1,5 +1,3 @@
-#ifndef __LINUX_LLC_H
-#define __LINUX_LLC_H
/*
* IEEE 802.2 User Interface SAPs for Linux, data structures and indicators.
*
@@ -12,80 +10,14 @@
*
* See the GNU General Public License for more details.
*/
+#ifndef __LINUX_LLC_H
+#define __LINUX_LLC_H
-#include <linux/socket.h>
+#include <uapi/linux/llc.h>
-#define __LLC_SOCK_SIZE__ 16 /* sizeof(sockaddr_llc), word align. */
-struct sockaddr_llc {
- __kernel_sa_family_t sllc_family; /* AF_LLC */
- __kernel_sa_family_t sllc_arphrd; /* ARPHRD_ETHER */
- unsigned char sllc_test;
- unsigned char sllc_xid;
- unsigned char sllc_ua; /* UA data, only for SOCK_STREAM. */
- unsigned char sllc_sap;
- unsigned char sllc_mac[IFHWADDRLEN];
- unsigned char __pad[__LLC_SOCK_SIZE__ -
- sizeof(__kernel_sa_family_t) * 2 -
- sizeof(unsigned char) * 4 - IFHWADDRLEN];
-};
-
-/* sockopt definitions. */
-enum llc_sockopts {
- LLC_OPT_UNKNOWN = 0,
- LLC_OPT_RETRY, /* max retrans attempts. */
- LLC_OPT_SIZE, /* max PDU size (octets). */
- LLC_OPT_ACK_TMR_EXP, /* ack expire time (secs). */
- LLC_OPT_P_TMR_EXP, /* pf cycle expire time (secs). */
- LLC_OPT_REJ_TMR_EXP, /* rej sent expire time (secs). */
- LLC_OPT_BUSY_TMR_EXP, /* busy state expire time (secs). */
- LLC_OPT_TX_WIN, /* tx window size. */
- LLC_OPT_RX_WIN, /* rx window size. */
- LLC_OPT_PKTINFO, /* ancillary packet information. */
- LLC_OPT_MAX
-};
-
-#define LLC_OPT_MAX_RETRY 100
-#define LLC_OPT_MAX_SIZE 4196
-#define LLC_OPT_MAX_WIN 127
-#define LLC_OPT_MAX_ACK_TMR_EXP 60
-#define LLC_OPT_MAX_P_TMR_EXP 60
-#define LLC_OPT_MAX_REJ_TMR_EXP 60
-#define LLC_OPT_MAX_BUSY_TMR_EXP 60
-
-/* LLC SAP types. */
-#define LLC_SAP_NULL 0x00 /* NULL SAP. */
-#define LLC_SAP_LLC 0x02 /* LLC Sublayer Management. */
-#define LLC_SAP_SNA 0x04 /* SNA Path Control. */
-#define LLC_SAP_PNM 0x0E /* Proway Network Management. */
-#define LLC_SAP_IP 0x06 /* TCP/IP. */
-#define LLC_SAP_BSPAN 0x42 /* Bridge Spanning Tree Proto */
-#define LLC_SAP_MMS 0x4E /* Manufacturing Message Srv. */
-#define LLC_SAP_8208 0x7E /* ISO 8208 */
-#define LLC_SAP_3COM 0x80 /* 3COM. */
-#define LLC_SAP_PRO 0x8E /* Proway Active Station List */
-#define LLC_SAP_SNAP 0xAA /* SNAP. */
-#define LLC_SAP_BANYAN 0xBC /* Banyan. */
-#define LLC_SAP_IPX 0xE0 /* IPX/SPX. */
-#define LLC_SAP_NETBEUI 0xF0 /* NetBEUI. */
-#define LLC_SAP_LANMGR 0xF4 /* LanManager. */
-#define LLC_SAP_IMPL 0xF8 /* IMPL */
-#define LLC_SAP_DISC 0xFC /* Discovery */
-#define LLC_SAP_OSI 0xFE /* OSI Network Layers. */
-#define LLC_SAP_LAR 0xDC /* LAN Address Resolution */
-#define LLC_SAP_RM 0xD4 /* Resource Management */
-#define LLC_SAP_GLOBAL 0xFF /* Global SAP. */
-
-struct llc_pktinfo {
- int lpi_ifindex;
- unsigned char lpi_sap;
- unsigned char lpi_mac[IFHWADDRLEN];
-};
-
-#ifdef __KERNEL__
#define LLC_SAP_DYN_START 0xC0
#define LLC_SAP_DYN_STOP 0xDE
#define LLC_SAP_DYN_TRIES 4
#define llc_ui_skb_cb(__skb) ((struct sockaddr_llc *)&((__skb)->cb[0]))
-#endif /* __KERNEL__ */
#endif /* __LINUX_LLC_H */
diff --git a/include/linux/loop.h b/include/linux/loop.h
index 9635116..6492181 100644
--- a/include/linux/loop.h
+++ b/include/linux/loop.h
@@ -1,6 +1,3 @@
-#ifndef _LINUX_LOOP_H
-#define _LINUX_LOOP_H
-
/*
* include/linux/loop.h
*
@@ -9,15 +6,14 @@
* Copyright 1993 by Theodore Ts'o. Redistribution of this file is
* permitted under the GNU General Public License.
*/
+#ifndef _LINUX_LOOP_H
+#define _LINUX_LOOP_H
-#define LO_NAME_SIZE 64
-#define LO_KEY_SIZE 32
-
-#ifdef __KERNEL__
#include <linux/bio.h>
#include <linux/blkdev.h>
#include <linux/spinlock.h>
#include <linux/mutex.h>
+#include <uapi/linux/loop.h>
/* Possible states of device */
enum {
@@ -66,69 +62,6 @@
struct gendisk *lo_disk;
};
-#endif /* __KERNEL__ */
-
-/*
- * Loop flags
- */
-enum {
- LO_FLAGS_READ_ONLY = 1,
- LO_FLAGS_AUTOCLEAR = 4,
- LO_FLAGS_PARTSCAN = 8,
-};
-
-#include <asm/posix_types.h> /* for __kernel_old_dev_t */
-#include <linux/types.h> /* for __u64 */
-
-/* Backwards compatibility version */
-struct loop_info {
- int lo_number; /* ioctl r/o */
- __kernel_old_dev_t lo_device; /* ioctl r/o */
- unsigned long lo_inode; /* ioctl r/o */
- __kernel_old_dev_t lo_rdevice; /* ioctl r/o */
- int lo_offset;
- int lo_encrypt_type;
- int lo_encrypt_key_size; /* ioctl w/o */
- int lo_flags; /* ioctl r/o */
- char lo_name[LO_NAME_SIZE];
- unsigned char lo_encrypt_key[LO_KEY_SIZE]; /* ioctl w/o */
- unsigned long lo_init[2];
- char reserved[4];
-};
-
-struct loop_info64 {
- __u64 lo_device; /* ioctl r/o */
- __u64 lo_inode; /* ioctl r/o */
- __u64 lo_rdevice; /* ioctl r/o */
- __u64 lo_offset;
- __u64 lo_sizelimit;/* bytes, 0 == max available */
- __u32 lo_number; /* ioctl r/o */
- __u32 lo_encrypt_type;
- __u32 lo_encrypt_key_size; /* ioctl w/o */
- __u32 lo_flags; /* ioctl r/o */
- __u8 lo_file_name[LO_NAME_SIZE];
- __u8 lo_crypt_name[LO_NAME_SIZE];
- __u8 lo_encrypt_key[LO_KEY_SIZE]; /* ioctl w/o */
- __u64 lo_init[2];
-};
-
-/*
- * Loop filter types
- */
-
-#define LO_CRYPT_NONE 0
-#define LO_CRYPT_XOR 1
-#define LO_CRYPT_DES 2
-#define LO_CRYPT_FISH2 3 /* Twofish encryption */
-#define LO_CRYPT_BLOW 4
-#define LO_CRYPT_CAST128 5
-#define LO_CRYPT_IDEA 6
-#define LO_CRYPT_DUMMY 9
-#define LO_CRYPT_SKIPJACK 10
-#define LO_CRYPT_CRYPTOAPI 18
-#define MAX_LO_CRYPT 20
-
-#ifdef __KERNEL__
/* Support for loadable transfer modules */
struct loop_func_table {
int number; /* filter type */
@@ -147,21 +80,3 @@
int loop_unregister_transfer(int number);
#endif
-/*
- * IOCTL commands --- we will commandeer 0x4C ('L')
- */
-
-#define LOOP_SET_FD 0x4C00
-#define LOOP_CLR_FD 0x4C01
-#define LOOP_SET_STATUS 0x4C02
-#define LOOP_GET_STATUS 0x4C03
-#define LOOP_SET_STATUS64 0x4C04
-#define LOOP_GET_STATUS64 0x4C05
-#define LOOP_CHANGE_FD 0x4C06
-#define LOOP_SET_CAPACITY 0x4C07
-
-/* /dev/loop-control interface */
-#define LOOP_CTL_ADD 0x4C80
-#define LOOP_CTL_REMOVE 0x4C81
-#define LOOP_CTL_GET_FREE 0x4C82
-#endif
diff --git a/include/linux/lp.h b/include/linux/lp.h
index 0df024b..0dd276a 100644
--- a/include/linux/lp.h
+++ b/include/linux/lp.h
@@ -1,105 +1,16 @@
-#ifndef _LINUX_LP_H
-#define _LINUX_LP_H
-
/*
* usr/include/linux/lp.h c.1991-1992 James Wiegand
* many modifications copyright (C) 1992 Michael K. Johnson
* Interrupt support added 1993 Nigel Gamble
* Removed 8255 status defines from inside __KERNEL__ Marcelo Tosatti
*/
+#ifndef _LINUX_LP_H
+#define _LINUX_LP_H
-/*
- * Per POSIX guidelines, this module reserves the LP and lp prefixes
- * These are the lp_table[minor].flags flags...
- */
-#define LP_EXIST 0x0001
-#define LP_SELEC 0x0002
-#define LP_BUSY 0x0004
-#define LP_BUSY_BIT_POS 2
-#define LP_OFFL 0x0008
-#define LP_NOPA 0x0010
-#define LP_ERR 0x0020
-#define LP_ABORT 0x0040
-#define LP_CAREFUL 0x0080 /* obsoleted -arca */
-#define LP_ABORTOPEN 0x0100
-
-#define LP_TRUST_IRQ_ 0x0200 /* obsolete */
-#define LP_NO_REVERSE 0x0400 /* No reverse mode available. */
-#define LP_DATA_AVAIL 0x0800 /* Data is available. */
-
-/*
- * bit defines for 8255 status port
- * base + 1
- * accessed with LP_S(minor), which gets the byte...
- */
-#define LP_PBUSY 0x80 /* inverted input, active high */
-#define LP_PACK 0x40 /* unchanged input, active low */
-#define LP_POUTPA 0x20 /* unchanged input, active high */
-#define LP_PSELECD 0x10 /* unchanged input, active high */
-#define LP_PERRORP 0x08 /* unchanged input, active low */
-
-/* timeout for each character. This is relative to bus cycles -- it
- * is the count in a busy loop. THIS IS THE VALUE TO CHANGE if you
- * have extremely slow printing, or if the machine seems to slow down
- * a lot when you print. If you have slow printing, increase this
- * number and recompile, and if your system gets bogged down, decrease
- * this number. This can be changed with the tunelp(8) command as well.
- */
-
-#define LP_INIT_CHAR 1000
-
-/* The parallel port specs apparently say that there needs to be
- * a .5usec wait before and after the strobe.
- */
-
-#define LP_INIT_WAIT 1
-
-/* This is the amount of time that the driver waits for the printer to
- * catch up when the printer's buffer appears to be filled. If you
- * want to tune this and have a fast printer (i.e. HPIIIP), decrease
- * this number, and if you have a slow printer, increase this number.
- * This is in hundredths of a second, the default 2 being .05 second.
- * Or use the tunelp(8) command, which is especially nice if you want
- * change back and forth between character and graphics printing, which
- * are wildly different...
- */
-
-#define LP_INIT_TIME 2
-
-/* IOCTL numbers */
-#define LPCHAR 0x0601 /* corresponds to LP_INIT_CHAR */
-#define LPTIME 0x0602 /* corresponds to LP_INIT_TIME */
-#define LPABORT 0x0604 /* call with TRUE arg to abort on error,
- FALSE to retry. Default is retry. */
-#define LPSETIRQ 0x0605 /* call with new IRQ number,
- or 0 for polling (no IRQ) */
-#define LPGETIRQ 0x0606 /* get the current IRQ number */
-#define LPWAIT 0x0608 /* corresponds to LP_INIT_WAIT */
-/* NOTE: LPCAREFUL is obsoleted and it' s always the default right now -arca */
-#define LPCAREFUL 0x0609 /* call with TRUE arg to require out-of-paper, off-
- line, and error indicators good on all writes,
- FALSE to ignore them. Default is ignore. */
-#define LPABORTOPEN 0x060a /* call with TRUE arg to abort open() on error,
- FALSE to ignore error. Default is ignore. */
-#define LPGETSTATUS 0x060b /* return LP_S(minor) */
-#define LPRESET 0x060c /* reset printer */
-#ifdef LP_STATS
-#define LPGETSTATS 0x060d /* get statistics (struct lp_stats) */
-#endif
-#define LPGETFLAGS 0x060e /* get status flags */
-#define LPSETTIMEOUT 0x060f /* set parport timeout */
-
-/* timeout for printk'ing a timeout, in jiffies (100ths of a second).
- This is also used for re-checking error conditions if LP_ABORT is
- not set. This is the default behavior. */
-
-#define LP_TIMEOUT_INTERRUPT (60 * HZ)
-#define LP_TIMEOUT_POLLED (10 * HZ)
-
-#ifdef __KERNEL__
#include <linux/wait.h>
#include <linux/mutex.h>
+#include <uapi/linux/lp.h>
/* Magic numbers for defining port-device mappings */
#define LP_PARPORT_UNSPEC -4
@@ -187,5 +98,3 @@
#define LP_DELAY 50
#endif
-
-#endif
diff --git a/include/linux/mdio.h b/include/linux/mdio.h
index 6c40684..3d15c83 100644
--- a/include/linux/mdio.h
+++ b/include/linux/mdio.h
@@ -6,295 +6,11 @@
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation, incorporated herein by reference.
*/
-
#ifndef __LINUX_MDIO_H__
#define __LINUX_MDIO_H__
-#include <linux/types.h>
-#include <linux/mii.h>
+#include <uapi/linux/mdio.h>
-/* MDIO Manageable Devices (MMDs). */
-#define MDIO_MMD_PMAPMD 1 /* Physical Medium Attachment/
- * Physical Medium Dependent */
-#define MDIO_MMD_WIS 2 /* WAN Interface Sublayer */
-#define MDIO_MMD_PCS 3 /* Physical Coding Sublayer */
-#define MDIO_MMD_PHYXS 4 /* PHY Extender Sublayer */
-#define MDIO_MMD_DTEXS 5 /* DTE Extender Sublayer */
-#define MDIO_MMD_TC 6 /* Transmission Convergence */
-#define MDIO_MMD_AN 7 /* Auto-Negotiation */
-#define MDIO_MMD_C22EXT 29 /* Clause 22 extension */
-#define MDIO_MMD_VEND1 30 /* Vendor specific 1 */
-#define MDIO_MMD_VEND2 31 /* Vendor specific 2 */
-
-/* Generic MDIO registers. */
-#define MDIO_CTRL1 MII_BMCR
-#define MDIO_STAT1 MII_BMSR
-#define MDIO_DEVID1 MII_PHYSID1
-#define MDIO_DEVID2 MII_PHYSID2
-#define MDIO_SPEED 4 /* Speed ability */
-#define MDIO_DEVS1 5 /* Devices in package */
-#define MDIO_DEVS2 6
-#define MDIO_CTRL2 7 /* 10G control 2 */
-#define MDIO_STAT2 8 /* 10G status 2 */
-#define MDIO_PMA_TXDIS 9 /* 10G PMA/PMD transmit disable */
-#define MDIO_PMA_RXDET 10 /* 10G PMA/PMD receive signal detect */
-#define MDIO_PMA_EXTABLE 11 /* 10G PMA/PMD extended ability */
-#define MDIO_PKGID1 14 /* Package identifier */
-#define MDIO_PKGID2 15
-#define MDIO_AN_ADVERTISE 16 /* AN advertising (base page) */
-#define MDIO_AN_LPA 19 /* AN LP abilities (base page) */
-#define MDIO_PCS_EEE_ABLE 20 /* EEE Capability register */
-#define MDIO_PCS_EEE_WK_ERR 22 /* EEE wake error counter */
-#define MDIO_PHYXS_LNSTAT 24 /* PHY XGXS lane state */
-#define MDIO_AN_EEE_ADV 60 /* EEE advertisement */
-#define MDIO_AN_EEE_LPABLE 61 /* EEE link partner ability */
-
-/* Media-dependent registers. */
-#define MDIO_PMA_10GBT_SWAPPOL 130 /* 10GBASE-T pair swap & polarity */
-#define MDIO_PMA_10GBT_TXPWR 131 /* 10GBASE-T TX power control */
-#define MDIO_PMA_10GBT_SNR 133 /* 10GBASE-T SNR margin, lane A.
- * Lanes B-D are numbered 134-136. */
-#define MDIO_PMA_10GBR_FECABLE 170 /* 10GBASE-R FEC ability */
-#define MDIO_PCS_10GBX_STAT1 24 /* 10GBASE-X PCS status 1 */
-#define MDIO_PCS_10GBRT_STAT1 32 /* 10GBASE-R/-T PCS status 1 */
-#define MDIO_PCS_10GBRT_STAT2 33 /* 10GBASE-R/-T PCS status 2 */
-#define MDIO_AN_10GBT_CTRL 32 /* 10GBASE-T auto-negotiation control */
-#define MDIO_AN_10GBT_STAT 33 /* 10GBASE-T auto-negotiation status */
-
-/* LASI (Link Alarm Status Interrupt) registers, defined by XENPAK MSA. */
-#define MDIO_PMA_LASI_RXCTRL 0x9000 /* RX_ALARM control */
-#define MDIO_PMA_LASI_TXCTRL 0x9001 /* TX_ALARM control */
-#define MDIO_PMA_LASI_CTRL 0x9002 /* LASI control */
-#define MDIO_PMA_LASI_RXSTAT 0x9003 /* RX_ALARM status */
-#define MDIO_PMA_LASI_TXSTAT 0x9004 /* TX_ALARM status */
-#define MDIO_PMA_LASI_STAT 0x9005 /* LASI status */
-
-/* Control register 1. */
-/* Enable extended speed selection */
-#define MDIO_CTRL1_SPEEDSELEXT (BMCR_SPEED1000 | BMCR_SPEED100)
-/* All speed selection bits */
-#define MDIO_CTRL1_SPEEDSEL (MDIO_CTRL1_SPEEDSELEXT | 0x003c)
-#define MDIO_CTRL1_FULLDPLX BMCR_FULLDPLX
-#define MDIO_CTRL1_LPOWER BMCR_PDOWN
-#define MDIO_CTRL1_RESET BMCR_RESET
-#define MDIO_PMA_CTRL1_LOOPBACK 0x0001
-#define MDIO_PMA_CTRL1_SPEED1000 BMCR_SPEED1000
-#define MDIO_PMA_CTRL1_SPEED100 BMCR_SPEED100
-#define MDIO_PCS_CTRL1_LOOPBACK BMCR_LOOPBACK
-#define MDIO_PHYXS_CTRL1_LOOPBACK BMCR_LOOPBACK
-#define MDIO_AN_CTRL1_RESTART BMCR_ANRESTART
-#define MDIO_AN_CTRL1_ENABLE BMCR_ANENABLE
-#define MDIO_AN_CTRL1_XNP 0x2000 /* Enable extended next page */
-#define MDIO_PCS_CTRL1_CLKSTOP_EN 0x400 /* Stop the clock during LPI */
-
-/* 10 Gb/s */
-#define MDIO_CTRL1_SPEED10G (MDIO_CTRL1_SPEEDSELEXT | 0x00)
-/* 10PASS-TS/2BASE-TL */
-#define MDIO_CTRL1_SPEED10P2B (MDIO_CTRL1_SPEEDSELEXT | 0x04)
-
-/* Status register 1. */
-#define MDIO_STAT1_LPOWERABLE 0x0002 /* Low-power ability */
-#define MDIO_STAT1_LSTATUS BMSR_LSTATUS
-#define MDIO_STAT1_FAULT 0x0080 /* Fault */
-#define MDIO_AN_STAT1_LPABLE 0x0001 /* Link partner AN ability */
-#define MDIO_AN_STAT1_ABLE BMSR_ANEGCAPABLE
-#define MDIO_AN_STAT1_RFAULT BMSR_RFAULT
-#define MDIO_AN_STAT1_COMPLETE BMSR_ANEGCOMPLETE
-#define MDIO_AN_STAT1_PAGE 0x0040 /* Page received */
-#define MDIO_AN_STAT1_XNP 0x0080 /* Extended next page status */
-
-/* Speed register. */
-#define MDIO_SPEED_10G 0x0001 /* 10G capable */
-#define MDIO_PMA_SPEED_2B 0x0002 /* 2BASE-TL capable */
-#define MDIO_PMA_SPEED_10P 0x0004 /* 10PASS-TS capable */
-#define MDIO_PMA_SPEED_1000 0x0010 /* 1000M capable */
-#define MDIO_PMA_SPEED_100 0x0020 /* 100M capable */
-#define MDIO_PMA_SPEED_10 0x0040 /* 10M capable */
-#define MDIO_PCS_SPEED_10P2B 0x0002 /* 10PASS-TS/2BASE-TL capable */
-
-/* Device present registers. */
-#define MDIO_DEVS_PRESENT(devad) (1 << (devad))
-#define MDIO_DEVS_PMAPMD MDIO_DEVS_PRESENT(MDIO_MMD_PMAPMD)
-#define MDIO_DEVS_WIS MDIO_DEVS_PRESENT(MDIO_MMD_WIS)
-#define MDIO_DEVS_PCS MDIO_DEVS_PRESENT(MDIO_MMD_PCS)
-#define MDIO_DEVS_PHYXS MDIO_DEVS_PRESENT(MDIO_MMD_PHYXS)
-#define MDIO_DEVS_DTEXS MDIO_DEVS_PRESENT(MDIO_MMD_DTEXS)
-#define MDIO_DEVS_TC MDIO_DEVS_PRESENT(MDIO_MMD_TC)
-#define MDIO_DEVS_AN MDIO_DEVS_PRESENT(MDIO_MMD_AN)
-#define MDIO_DEVS_C22EXT MDIO_DEVS_PRESENT(MDIO_MMD_C22EXT)
-
-/* Control register 2. */
-#define MDIO_PMA_CTRL2_TYPE 0x000f /* PMA/PMD type selection */
-#define MDIO_PMA_CTRL2_10GBCX4 0x0000 /* 10GBASE-CX4 type */
-#define MDIO_PMA_CTRL2_10GBEW 0x0001 /* 10GBASE-EW type */
-#define MDIO_PMA_CTRL2_10GBLW 0x0002 /* 10GBASE-LW type */
-#define MDIO_PMA_CTRL2_10GBSW 0x0003 /* 10GBASE-SW type */
-#define MDIO_PMA_CTRL2_10GBLX4 0x0004 /* 10GBASE-LX4 type */
-#define MDIO_PMA_CTRL2_10GBER 0x0005 /* 10GBASE-ER type */
-#define MDIO_PMA_CTRL2_10GBLR 0x0006 /* 10GBASE-LR type */
-#define MDIO_PMA_CTRL2_10GBSR 0x0007 /* 10GBASE-SR type */
-#define MDIO_PMA_CTRL2_10GBLRM 0x0008 /* 10GBASE-LRM type */
-#define MDIO_PMA_CTRL2_10GBT 0x0009 /* 10GBASE-T type */
-#define MDIO_PMA_CTRL2_10GBKX4 0x000a /* 10GBASE-KX4 type */
-#define MDIO_PMA_CTRL2_10GBKR 0x000b /* 10GBASE-KR type */
-#define MDIO_PMA_CTRL2_1000BT 0x000c /* 1000BASE-T type */
-#define MDIO_PMA_CTRL2_1000BKX 0x000d /* 1000BASE-KX type */
-#define MDIO_PMA_CTRL2_100BTX 0x000e /* 100BASE-TX type */
-#define MDIO_PMA_CTRL2_10BT 0x000f /* 10BASE-T type */
-#define MDIO_PCS_CTRL2_TYPE 0x0003 /* PCS type selection */
-#define MDIO_PCS_CTRL2_10GBR 0x0000 /* 10GBASE-R type */
-#define MDIO_PCS_CTRL2_10GBX 0x0001 /* 10GBASE-X type */
-#define MDIO_PCS_CTRL2_10GBW 0x0002 /* 10GBASE-W type */
-#define MDIO_PCS_CTRL2_10GBT 0x0003 /* 10GBASE-T type */
-
-/* Status register 2. */
-#define MDIO_STAT2_RXFAULT 0x0400 /* Receive fault */
-#define MDIO_STAT2_TXFAULT 0x0800 /* Transmit fault */
-#define MDIO_STAT2_DEVPRST 0xc000 /* Device present */
-#define MDIO_STAT2_DEVPRST_VAL 0x8000 /* Device present value */
-#define MDIO_PMA_STAT2_LBABLE 0x0001 /* PMA loopback ability */
-#define MDIO_PMA_STAT2_10GBEW 0x0002 /* 10GBASE-EW ability */
-#define MDIO_PMA_STAT2_10GBLW 0x0004 /* 10GBASE-LW ability */
-#define MDIO_PMA_STAT2_10GBSW 0x0008 /* 10GBASE-SW ability */
-#define MDIO_PMA_STAT2_10GBLX4 0x0010 /* 10GBASE-LX4 ability */
-#define MDIO_PMA_STAT2_10GBER 0x0020 /* 10GBASE-ER ability */
-#define MDIO_PMA_STAT2_10GBLR 0x0040 /* 10GBASE-LR ability */
-#define MDIO_PMA_STAT2_10GBSR 0x0080 /* 10GBASE-SR ability */
-#define MDIO_PMD_STAT2_TXDISAB 0x0100 /* PMD TX disable ability */
-#define MDIO_PMA_STAT2_EXTABLE 0x0200 /* Extended abilities */
-#define MDIO_PMA_STAT2_RXFLTABLE 0x1000 /* Receive fault ability */
-#define MDIO_PMA_STAT2_TXFLTABLE 0x2000 /* Transmit fault ability */
-#define MDIO_PCS_STAT2_10GBR 0x0001 /* 10GBASE-R capable */
-#define MDIO_PCS_STAT2_10GBX 0x0002 /* 10GBASE-X capable */
-#define MDIO_PCS_STAT2_10GBW 0x0004 /* 10GBASE-W capable */
-#define MDIO_PCS_STAT2_RXFLTABLE 0x1000 /* Receive fault ability */
-#define MDIO_PCS_STAT2_TXFLTABLE 0x2000 /* Transmit fault ability */
-
-/* Transmit disable register. */
-#define MDIO_PMD_TXDIS_GLOBAL 0x0001 /* Global PMD TX disable */
-#define MDIO_PMD_TXDIS_0 0x0002 /* PMD TX disable 0 */
-#define MDIO_PMD_TXDIS_1 0x0004 /* PMD TX disable 1 */
-#define MDIO_PMD_TXDIS_2 0x0008 /* PMD TX disable 2 */
-#define MDIO_PMD_TXDIS_3 0x0010 /* PMD TX disable 3 */
-
-/* Receive signal detect register. */
-#define MDIO_PMD_RXDET_GLOBAL 0x0001 /* Global PMD RX signal detect */
-#define MDIO_PMD_RXDET_0 0x0002 /* PMD RX signal detect 0 */
-#define MDIO_PMD_RXDET_1 0x0004 /* PMD RX signal detect 1 */
-#define MDIO_PMD_RXDET_2 0x0008 /* PMD RX signal detect 2 */
-#define MDIO_PMD_RXDET_3 0x0010 /* PMD RX signal detect 3 */
-
-/* Extended abilities register. */
-#define MDIO_PMA_EXTABLE_10GCX4 0x0001 /* 10GBASE-CX4 ability */
-#define MDIO_PMA_EXTABLE_10GBLRM 0x0002 /* 10GBASE-LRM ability */
-#define MDIO_PMA_EXTABLE_10GBT 0x0004 /* 10GBASE-T ability */
-#define MDIO_PMA_EXTABLE_10GBKX4 0x0008 /* 10GBASE-KX4 ability */
-#define MDIO_PMA_EXTABLE_10GBKR 0x0010 /* 10GBASE-KR ability */
-#define MDIO_PMA_EXTABLE_1000BT 0x0020 /* 1000BASE-T ability */
-#define MDIO_PMA_EXTABLE_1000BKX 0x0040 /* 1000BASE-KX ability */
-#define MDIO_PMA_EXTABLE_100BTX 0x0080 /* 100BASE-TX ability */
-#define MDIO_PMA_EXTABLE_10BT 0x0100 /* 10BASE-T ability */
-
-/* PHY XGXS lane state register. */
-#define MDIO_PHYXS_LNSTAT_SYNC0 0x0001
-#define MDIO_PHYXS_LNSTAT_SYNC1 0x0002
-#define MDIO_PHYXS_LNSTAT_SYNC2 0x0004
-#define MDIO_PHYXS_LNSTAT_SYNC3 0x0008
-#define MDIO_PHYXS_LNSTAT_ALIGN 0x1000
-
-/* PMA 10GBASE-T pair swap & polarity */
-#define MDIO_PMA_10GBT_SWAPPOL_ABNX 0x0001 /* Pair A/B uncrossed */
-#define MDIO_PMA_10GBT_SWAPPOL_CDNX 0x0002 /* Pair C/D uncrossed */
-#define MDIO_PMA_10GBT_SWAPPOL_AREV 0x0100 /* Pair A polarity reversed */
-#define MDIO_PMA_10GBT_SWAPPOL_BREV 0x0200 /* Pair B polarity reversed */
-#define MDIO_PMA_10GBT_SWAPPOL_CREV 0x0400 /* Pair C polarity reversed */
-#define MDIO_PMA_10GBT_SWAPPOL_DREV 0x0800 /* Pair D polarity reversed */
-
-/* PMA 10GBASE-T TX power register. */
-#define MDIO_PMA_10GBT_TXPWR_SHORT 0x0001 /* Short-reach mode */
-
-/* PMA 10GBASE-T SNR registers. */
-/* Value is SNR margin in dB, clamped to range [-127, 127], plus 0x8000. */
-#define MDIO_PMA_10GBT_SNR_BIAS 0x8000
-#define MDIO_PMA_10GBT_SNR_MAX 127
-
-/* PMA 10GBASE-R FEC ability register. */
-#define MDIO_PMA_10GBR_FECABLE_ABLE 0x0001 /* FEC ability */
-#define MDIO_PMA_10GBR_FECABLE_ERRABLE 0x0002 /* FEC error indic. ability */
-
-/* PCS 10GBASE-R/-T status register 1. */
-#define MDIO_PCS_10GBRT_STAT1_BLKLK 0x0001 /* Block lock attained */
-
-/* PCS 10GBASE-R/-T status register 2. */
-#define MDIO_PCS_10GBRT_STAT2_ERR 0x00ff
-#define MDIO_PCS_10GBRT_STAT2_BER 0x3f00
-
-/* AN 10GBASE-T control register. */
-#define MDIO_AN_10GBT_CTRL_ADV10G 0x1000 /* Advertise 10GBASE-T */
-
-/* AN 10GBASE-T status register. */
-#define MDIO_AN_10GBT_STAT_LPTRR 0x0200 /* LP training reset req. */
-#define MDIO_AN_10GBT_STAT_LPLTABLE 0x0400 /* LP loop timing ability */
-#define MDIO_AN_10GBT_STAT_LP10G 0x0800 /* LP is 10GBT capable */
-#define MDIO_AN_10GBT_STAT_REMOK 0x1000 /* Remote OK */
-#define MDIO_AN_10GBT_STAT_LOCOK 0x2000 /* Local OK */
-#define MDIO_AN_10GBT_STAT_MS 0x4000 /* Master/slave config */
-#define MDIO_AN_10GBT_STAT_MSFLT 0x8000 /* Master/slave config fault */
-
-/* EEE Supported/Advertisement/LP Advertisement registers.
- *
- * EEE capability Register (3.20), Advertisement (7.60) and
- * Link partner ability (7.61) registers have and can use the same identical
- * bit masks.
- */
-#define MDIO_AN_EEE_ADV_100TX 0x0002 /* Advertise 100TX EEE cap */
-#define MDIO_AN_EEE_ADV_1000T 0x0004 /* Advertise 1000T EEE cap */
-/* Note: the two defines above can be potentially used by the user-land
- * and cannot remove them now.
- * So, we define the new generic MDIO_EEE_100TX and MDIO_EEE_1000T macros
- * using the previous ones (that can be considered obsolete).
- */
-#define MDIO_EEE_100TX MDIO_AN_EEE_ADV_100TX /* 100TX EEE cap */
-#define MDIO_EEE_1000T MDIO_AN_EEE_ADV_1000T /* 1000T EEE cap */
-#define MDIO_EEE_10GT 0x0008 /* 10GT EEE cap */
-#define MDIO_EEE_1000KX 0x0010 /* 1000KX EEE cap */
-#define MDIO_EEE_10GKX4 0x0020 /* 10G KX4 EEE cap */
-#define MDIO_EEE_10GKR 0x0040 /* 10G KR EEE cap */
-
-/* LASI RX_ALARM control/status registers. */
-#define MDIO_PMA_LASI_RX_PHYXSLFLT 0x0001 /* PHY XS RX local fault */
-#define MDIO_PMA_LASI_RX_PCSLFLT 0x0008 /* PCS RX local fault */
-#define MDIO_PMA_LASI_RX_PMALFLT 0x0010 /* PMA/PMD RX local fault */
-#define MDIO_PMA_LASI_RX_OPTICPOWERFLT 0x0020 /* RX optical power fault */
-#define MDIO_PMA_LASI_RX_WISLFLT 0x0200 /* WIS local fault */
-
-/* LASI TX_ALARM control/status registers. */
-#define MDIO_PMA_LASI_TX_PHYXSLFLT 0x0001 /* PHY XS TX local fault */
-#define MDIO_PMA_LASI_TX_PCSLFLT 0x0008 /* PCS TX local fault */
-#define MDIO_PMA_LASI_TX_PMALFLT 0x0010 /* PMA/PMD TX local fault */
-#define MDIO_PMA_LASI_TX_LASERPOWERFLT 0x0080 /* Laser output power fault */
-#define MDIO_PMA_LASI_TX_LASERTEMPFLT 0x0100 /* Laser temperature fault */
-#define MDIO_PMA_LASI_TX_LASERBICURRFLT 0x0200 /* Laser bias current fault */
-
-/* LASI control/status registers. */
-#define MDIO_PMA_LASI_LSALARM 0x0001 /* LS_ALARM enable/status */
-#define MDIO_PMA_LASI_TXALARM 0x0002 /* TX_ALARM enable/status */
-#define MDIO_PMA_LASI_RXALARM 0x0004 /* RX_ALARM enable/status */
-
-/* Mapping between MDIO PRTAD/DEVAD and mii_ioctl_data::phy_id */
-
-#define MDIO_PHY_ID_C45 0x8000
-#define MDIO_PHY_ID_PRTAD 0x03e0
-#define MDIO_PHY_ID_DEVAD 0x001f
-#define MDIO_PHY_ID_C45_MASK \
- (MDIO_PHY_ID_C45 | MDIO_PHY_ID_PRTAD | MDIO_PHY_ID_DEVAD)
-
-static inline __u16 mdio_phy_id_c45(int prtad, int devad)
-{
- return MDIO_PHY_ID_C45 | (prtad << 5) | devad;
-}
-
-#ifdef __KERNEL__
static inline bool mdio_phy_id_is_c45(int phy_id)
{
@@ -460,5 +176,4 @@
return reg;
}
-#endif /* __KERNEL__ */
#endif /* __LINUX_MDIO_H__ */
diff --git a/include/linux/mempolicy.h b/include/linux/mempolicy.h
index cec5693..e5ccb9d 100644
--- a/include/linux/mempolicy.h
+++ b/include/linux/mempolicy.h
@@ -1,66 +1,10 @@
-#ifndef _LINUX_MEMPOLICY_H
-#define _LINUX_MEMPOLICY_H 1
-
-#include <linux/errno.h>
-
/*
* NUMA memory policies for Linux.
* Copyright 2003,2004 Andi Kleen SuSE Labs
*/
+#ifndef _LINUX_MEMPOLICY_H
+#define _LINUX_MEMPOLICY_H 1
-/*
- * Both the MPOL_* mempolicy mode and the MPOL_F_* optional mode flags are
- * passed by the user to either set_mempolicy() or mbind() in an 'int' actual.
- * The MPOL_MODE_FLAGS macro determines the legal set of optional mode flags.
- */
-
-/* Policies */
-enum {
- MPOL_DEFAULT,
- MPOL_PREFERRED,
- MPOL_BIND,
- MPOL_INTERLEAVE,
- MPOL_MAX, /* always last member of enum */
-};
-
-enum mpol_rebind_step {
- MPOL_REBIND_ONCE, /* do rebind work at once(not by two step) */
- MPOL_REBIND_STEP1, /* first step(set all the newly nodes) */
- MPOL_REBIND_STEP2, /* second step(clean all the disallowed nodes)*/
- MPOL_REBIND_NSTEP,
-};
-
-/* Flags for set_mempolicy */
-#define MPOL_F_STATIC_NODES (1 << 15)
-#define MPOL_F_RELATIVE_NODES (1 << 14)
-
-/*
- * MPOL_MODE_FLAGS is the union of all possible optional mode flags passed to
- * either set_mempolicy() or mbind().
- */
-#define MPOL_MODE_FLAGS (MPOL_F_STATIC_NODES | MPOL_F_RELATIVE_NODES)
-
-/* Flags for get_mempolicy */
-#define MPOL_F_NODE (1<<0) /* return next IL mode instead of node mask */
-#define MPOL_F_ADDR (1<<1) /* look up vma using address */
-#define MPOL_F_MEMS_ALLOWED (1<<2) /* return allowed memories */
-
-/* Flags for mbind */
-#define MPOL_MF_STRICT (1<<0) /* Verify existing pages in the mapping */
-#define MPOL_MF_MOVE (1<<1) /* Move pages owned by this process to conform to mapping */
-#define MPOL_MF_MOVE_ALL (1<<2) /* Move every page to conform to mapping */
-#define MPOL_MF_INTERNAL (1<<3) /* Internal flags start here */
-
-/*
- * Internal flags that share the struct mempolicy flags word with
- * "mode flags". These flags are allocated from bit 0 up, as they
- * are never OR'ed into the mode in mempolicy API arguments.
- */
-#define MPOL_F_SHARED (1 << 0) /* identify shared policies */
-#define MPOL_F_LOCAL (1 << 1) /* preferred local allocation */
-#define MPOL_F_REBINDING (1 << 2) /* identify policies in rebinding */
-
-#ifdef __KERNEL__
#include <linux/mmzone.h>
#include <linux/slab.h>
@@ -68,6 +12,7 @@
#include <linux/spinlock.h>
#include <linux/nodemask.h>
#include <linux/pagemap.h>
+#include <uapi/linux/mempolicy.h>
struct mm_struct;
@@ -379,6 +324,4 @@
}
#endif /* CONFIG_NUMA */
-#endif /* __KERNEL__ */
-
#endif
diff --git a/include/linux/mii.h b/include/linux/mii.h
index 8ef3a7a..47492c9 100644
--- a/include/linux/mii.h
+++ b/include/linux/mii.h
@@ -4,163 +4,12 @@
*
* Copyright (C) 1996, 1999, 2001 David S. Miller (davem@redhat.com)
*/
-
#ifndef __LINUX_MII_H__
#define __LINUX_MII_H__
-#include <linux/types.h>
-#include <linux/ethtool.h>
-
-/* Generic MII registers. */
-#define MII_BMCR 0x00 /* Basic mode control register */
-#define MII_BMSR 0x01 /* Basic mode status register */
-#define MII_PHYSID1 0x02 /* PHYS ID 1 */
-#define MII_PHYSID2 0x03 /* PHYS ID 2 */
-#define MII_ADVERTISE 0x04 /* Advertisement control reg */
-#define MII_LPA 0x05 /* Link partner ability reg */
-#define MII_EXPANSION 0x06 /* Expansion register */
-#define MII_CTRL1000 0x09 /* 1000BASE-T control */
-#define MII_STAT1000 0x0a /* 1000BASE-T status */
-#define MII_MMD_CTRL 0x0d /* MMD Access Control Register */
-#define MII_MMD_DATA 0x0e /* MMD Access Data Register */
-#define MII_ESTATUS 0x0f /* Extended Status */
-#define MII_DCOUNTER 0x12 /* Disconnect counter */
-#define MII_FCSCOUNTER 0x13 /* False carrier counter */
-#define MII_NWAYTEST 0x14 /* N-way auto-neg test reg */
-#define MII_RERRCOUNTER 0x15 /* Receive error counter */
-#define MII_SREVISION 0x16 /* Silicon revision */
-#define MII_RESV1 0x17 /* Reserved... */
-#define MII_LBRERROR 0x18 /* Lpback, rx, bypass error */
-#define MII_PHYADDR 0x19 /* PHY address */
-#define MII_RESV2 0x1a /* Reserved... */
-#define MII_TPISTATUS 0x1b /* TPI status for 10mbps */
-#define MII_NCONFIG 0x1c /* Network interface config */
-
-/* Basic mode control register. */
-#define BMCR_RESV 0x003f /* Unused... */
-#define BMCR_SPEED1000 0x0040 /* MSB of Speed (1000) */
-#define BMCR_CTST 0x0080 /* Collision test */
-#define BMCR_FULLDPLX 0x0100 /* Full duplex */
-#define BMCR_ANRESTART 0x0200 /* Auto negotiation restart */
-#define BMCR_ISOLATE 0x0400 /* Isolate data paths from MII */
-#define BMCR_PDOWN 0x0800 /* Enable low power state */
-#define BMCR_ANENABLE 0x1000 /* Enable auto negotiation */
-#define BMCR_SPEED100 0x2000 /* Select 100Mbps */
-#define BMCR_LOOPBACK 0x4000 /* TXD loopback bits */
-#define BMCR_RESET 0x8000 /* Reset to default state */
-
-/* Basic mode status register. */
-#define BMSR_ERCAP 0x0001 /* Ext-reg capability */
-#define BMSR_JCD 0x0002 /* Jabber detected */
-#define BMSR_LSTATUS 0x0004 /* Link status */
-#define BMSR_ANEGCAPABLE 0x0008 /* Able to do auto-negotiation */
-#define BMSR_RFAULT 0x0010 /* Remote fault detected */
-#define BMSR_ANEGCOMPLETE 0x0020 /* Auto-negotiation complete */
-#define BMSR_RESV 0x00c0 /* Unused... */
-#define BMSR_ESTATEN 0x0100 /* Extended Status in R15 */
-#define BMSR_100HALF2 0x0200 /* Can do 100BASE-T2 HDX */
-#define BMSR_100FULL2 0x0400 /* Can do 100BASE-T2 FDX */
-#define BMSR_10HALF 0x0800 /* Can do 10mbps, half-duplex */
-#define BMSR_10FULL 0x1000 /* Can do 10mbps, full-duplex */
-#define BMSR_100HALF 0x2000 /* Can do 100mbps, half-duplex */
-#define BMSR_100FULL 0x4000 /* Can do 100mbps, full-duplex */
-#define BMSR_100BASE4 0x8000 /* Can do 100mbps, 4k packets */
-
-/* Advertisement control register. */
-#define ADVERTISE_SLCT 0x001f /* Selector bits */
-#define ADVERTISE_CSMA 0x0001 /* Only selector supported */
-#define ADVERTISE_10HALF 0x0020 /* Try for 10mbps half-duplex */
-#define ADVERTISE_1000XFULL 0x0020 /* Try for 1000BASE-X full-duplex */
-#define ADVERTISE_10FULL 0x0040 /* Try for 10mbps full-duplex */
-#define ADVERTISE_1000XHALF 0x0040 /* Try for 1000BASE-X half-duplex */
-#define ADVERTISE_100HALF 0x0080 /* Try for 100mbps half-duplex */
-#define ADVERTISE_1000XPAUSE 0x0080 /* Try for 1000BASE-X pause */
-#define ADVERTISE_100FULL 0x0100 /* Try for 100mbps full-duplex */
-#define ADVERTISE_1000XPSE_ASYM 0x0100 /* Try for 1000BASE-X asym pause */
-#define ADVERTISE_100BASE4 0x0200 /* Try for 100mbps 4k packets */
-#define ADVERTISE_PAUSE_CAP 0x0400 /* Try for pause */
-#define ADVERTISE_PAUSE_ASYM 0x0800 /* Try for asymetric pause */
-#define ADVERTISE_RESV 0x1000 /* Unused... */
-#define ADVERTISE_RFAULT 0x2000 /* Say we can detect faults */
-#define ADVERTISE_LPACK 0x4000 /* Ack link partners response */
-#define ADVERTISE_NPAGE 0x8000 /* Next page bit */
-
-#define ADVERTISE_FULL (ADVERTISE_100FULL | ADVERTISE_10FULL | \
- ADVERTISE_CSMA)
-#define ADVERTISE_ALL (ADVERTISE_10HALF | ADVERTISE_10FULL | \
- ADVERTISE_100HALF | ADVERTISE_100FULL)
-
-/* Link partner ability register. */
-#define LPA_SLCT 0x001f /* Same as advertise selector */
-#define LPA_10HALF 0x0020 /* Can do 10mbps half-duplex */
-#define LPA_1000XFULL 0x0020 /* Can do 1000BASE-X full-duplex */
-#define LPA_10FULL 0x0040 /* Can do 10mbps full-duplex */
-#define LPA_1000XHALF 0x0040 /* Can do 1000BASE-X half-duplex */
-#define LPA_100HALF 0x0080 /* Can do 100mbps half-duplex */
-#define LPA_1000XPAUSE 0x0080 /* Can do 1000BASE-X pause */
-#define LPA_100FULL 0x0100 /* Can do 100mbps full-duplex */
-#define LPA_1000XPAUSE_ASYM 0x0100 /* Can do 1000BASE-X pause asym*/
-#define LPA_100BASE4 0x0200 /* Can do 100mbps 4k packets */
-#define LPA_PAUSE_CAP 0x0400 /* Can pause */
-#define LPA_PAUSE_ASYM 0x0800 /* Can pause asymetrically */
-#define LPA_RESV 0x1000 /* Unused... */
-#define LPA_RFAULT 0x2000 /* Link partner faulted */
-#define LPA_LPACK 0x4000 /* Link partner acked us */
-#define LPA_NPAGE 0x8000 /* Next page bit */
-
-#define LPA_DUPLEX (LPA_10FULL | LPA_100FULL)
-#define LPA_100 (LPA_100FULL | LPA_100HALF | LPA_100BASE4)
-
-/* Expansion register for auto-negotiation. */
-#define EXPANSION_NWAY 0x0001 /* Can do N-way auto-nego */
-#define EXPANSION_LCWP 0x0002 /* Got new RX page code word */
-#define EXPANSION_ENABLENPAGE 0x0004 /* This enables npage words */
-#define EXPANSION_NPCAPABLE 0x0008 /* Link partner supports npage */
-#define EXPANSION_MFAULTS 0x0010 /* Multiple faults detected */
-#define EXPANSION_RESV 0xffe0 /* Unused... */
-
-#define ESTATUS_1000_TFULL 0x2000 /* Can do 1000BT Full */
-#define ESTATUS_1000_THALF 0x1000 /* Can do 1000BT Half */
-
-/* N-way test register. */
-#define NWAYTEST_RESV1 0x00ff /* Unused... */
-#define NWAYTEST_LOOPBACK 0x0100 /* Enable loopback for N-way */
-#define NWAYTEST_RESV2 0xfe00 /* Unused... */
-
-/* 1000BASE-T Control register */
-#define ADVERTISE_1000FULL 0x0200 /* Advertise 1000BASE-T full duplex */
-#define ADVERTISE_1000HALF 0x0100 /* Advertise 1000BASE-T half duplex */
-#define CTL1000_AS_MASTER 0x0800
-#define CTL1000_ENABLE_MASTER 0x1000
-
-/* 1000BASE-T Status register */
-#define LPA_1000LOCALRXOK 0x2000 /* Link partner local receiver status */
-#define LPA_1000REMRXOK 0x1000 /* Link partner remote receiver status */
-#define LPA_1000FULL 0x0800 /* Link partner 1000BASE-T full duplex */
-#define LPA_1000HALF 0x0400 /* Link partner 1000BASE-T half duplex */
-
-/* Flow control flags */
-#define FLOW_CTRL_TX 0x01
-#define FLOW_CTRL_RX 0x02
-
-/* MMD Access Control register fields */
-#define MII_MMD_CTRL_DEVAD_MASK 0x1f /* Mask MMD DEVAD*/
-#define MII_MMD_CTRL_ADDR 0x0000 /* Address */
-#define MII_MMD_CTRL_NOINCR 0x4000 /* no post increment */
-#define MII_MMD_CTRL_INCR_RDWT 0x8000 /* post increment on reads & writes */
-#define MII_MMD_CTRL_INCR_ON_WT 0xC000 /* post increment on writes only */
-
-/* This structure is used in all SIOCxMIIxxx ioctl calls */
-struct mii_ioctl_data {
- __u16 phy_id;
- __u16 reg_num;
- __u16 val_in;
- __u16 val_out;
-};
-
-#ifdef __KERNEL__
#include <linux/if.h>
+#include <uapi/linux/mii.h>
struct ethtool_cmd;
@@ -487,5 +336,4 @@
return cap;
}
-#endif /* __KERNEL__ */
#endif /* __LINUX_MII_H__ */
diff --git a/include/linux/mman.h b/include/linux/mman.h
index 77cec2f..d09dde1 100644
--- a/include/linux/mman.h
+++ b/include/linux/mman.h
@@ -1,20 +1,11 @@
#ifndef _LINUX_MMAN_H
#define _LINUX_MMAN_H
-#include <asm/mman.h>
-
-#define MREMAP_MAYMOVE 1
-#define MREMAP_FIXED 2
-
-#define OVERCOMMIT_GUESS 0
-#define OVERCOMMIT_ALWAYS 1
-#define OVERCOMMIT_NEVER 2
-
-#ifdef __KERNEL__
#include <linux/mm.h>
#include <linux/percpu_counter.h>
#include <linux/atomic.h>
+#include <uapi/linux/mman.h>
extern int sysctl_overcommit_memory;
extern int sysctl_overcommit_ratio;
@@ -88,5 +79,4 @@
_calc_vm_trans(flags, MAP_DENYWRITE, VM_DENYWRITE ) |
_calc_vm_trans(flags, MAP_LOCKED, VM_LOCKED );
}
-#endif /* __KERNEL__ */
#endif /* _LINUX_MMAN_H */
diff --git a/include/linux/mroute.h b/include/linux/mroute.h
index 46caaf4..ea00d91 100644
--- a/include/linux/mroute.h
+++ b/include/linux/mroute.h
@@ -1,138 +1,10 @@
#ifndef __LINUX_MROUTE_H
#define __LINUX_MROUTE_H
-#include <linux/sockios.h>
-#include <linux/types.h>
-#ifdef __KERNEL__
#include <linux/in.h>
-#endif
-
-/*
- * Based on the MROUTING 3.5 defines primarily to keep
- * source compatibility with BSD.
- *
- * See the mrouted code for the original history.
- *
- * Protocol Independent Multicast (PIM) data structures included
- * Carlos Picoto (cap@di.fc.ul.pt)
- *
- */
-
-#define MRT_BASE 200
-#define MRT_INIT (MRT_BASE) /* Activate the kernel mroute code */
-#define MRT_DONE (MRT_BASE+1) /* Shutdown the kernel mroute */
-#define MRT_ADD_VIF (MRT_BASE+2) /* Add a virtual interface */
-#define MRT_DEL_VIF (MRT_BASE+3) /* Delete a virtual interface */
-#define MRT_ADD_MFC (MRT_BASE+4) /* Add a multicast forwarding entry */
-#define MRT_DEL_MFC (MRT_BASE+5) /* Delete a multicast forwarding entry */
-#define MRT_VERSION (MRT_BASE+6) /* Get the kernel multicast version */
-#define MRT_ASSERT (MRT_BASE+7) /* Activate PIM assert mode */
-#define MRT_PIM (MRT_BASE+8) /* enable PIM code */
-#define MRT_TABLE (MRT_BASE+9) /* Specify mroute table ID */
-
-#define SIOCGETVIFCNT SIOCPROTOPRIVATE /* IP protocol privates */
-#define SIOCGETSGCNT (SIOCPROTOPRIVATE+1)
-#define SIOCGETRPF (SIOCPROTOPRIVATE+2)
-
-#define MAXVIFS 32
-typedef unsigned long vifbitmap_t; /* User mode code depends on this lot */
-typedef unsigned short vifi_t;
-#define ALL_VIFS ((vifi_t)(-1))
-
-/*
- * Same idea as select
- */
-
-#define VIFM_SET(n,m) ((m)|=(1<<(n)))
-#define VIFM_CLR(n,m) ((m)&=~(1<<(n)))
-#define VIFM_ISSET(n,m) ((m)&(1<<(n)))
-#define VIFM_CLRALL(m) ((m)=0)
-#define VIFM_COPY(mfrom,mto) ((mto)=(mfrom))
-#define VIFM_SAME(m1,m2) ((m1)==(m2))
-
-/*
- * Passed by mrouted for an MRT_ADD_VIF - again we use the
- * mrouted 3.6 structures for compatibility
- */
-
-struct vifctl {
- vifi_t vifc_vifi; /* Index of VIF */
- unsigned char vifc_flags; /* VIFF_ flags */
- unsigned char vifc_threshold; /* ttl limit */
- unsigned int vifc_rate_limit; /* Rate limiter values (NI) */
- union {
- struct in_addr vifc_lcl_addr; /* Local interface address */
- int vifc_lcl_ifindex; /* Local interface index */
- };
- struct in_addr vifc_rmt_addr; /* IPIP tunnel addr */
-};
-
-#define VIFF_TUNNEL 0x1 /* IPIP tunnel */
-#define VIFF_SRCRT 0x2 /* NI */
-#define VIFF_REGISTER 0x4 /* register vif */
-#define VIFF_USE_IFINDEX 0x8 /* use vifc_lcl_ifindex instead of
- vifc_lcl_addr to find an interface */
-
-/*
- * Cache manipulation structures for mrouted and PIMd
- */
-
-struct mfcctl {
- struct in_addr mfcc_origin; /* Origin of mcast */
- struct in_addr mfcc_mcastgrp; /* Group in question */
- vifi_t mfcc_parent; /* Where it arrived */
- unsigned char mfcc_ttls[MAXVIFS]; /* Where it is going */
- unsigned int mfcc_pkt_cnt; /* pkt count for src-grp */
- unsigned int mfcc_byte_cnt;
- unsigned int mfcc_wrong_if;
- int mfcc_expire;
-};
-
-/*
- * Group count retrieval for mrouted
- */
-
-struct sioc_sg_req {
- struct in_addr src;
- struct in_addr grp;
- unsigned long pktcnt;
- unsigned long bytecnt;
- unsigned long wrong_if;
-};
-
-/*
- * To get vif packet counts
- */
-
-struct sioc_vif_req {
- vifi_t vifi; /* Which iface */
- unsigned long icount; /* In packets */
- unsigned long ocount; /* Out packets */
- unsigned long ibytes; /* In bytes */
- unsigned long obytes; /* Out bytes */
-};
-
-/*
- * This is the format the mroute daemon expects to see IGMP control
- * data. Magically happens to be like an IP packet as per the original
- */
-
-struct igmpmsg {
- __u32 unused1,unused2;
- unsigned char im_msgtype; /* What is this */
- unsigned char im_mbz; /* Must be zero */
- unsigned char im_vif; /* Interface (this ought to be a vifi_t!) */
- unsigned char unused3;
- struct in_addr im_src,im_dst;
-};
-
-/*
- * That's all usermode folks
- */
-
-#ifdef __KERNEL__
#include <linux/pim.h>
#include <net/sock.h>
+#include <uapi/linux/mroute.h>
#ifdef CONFIG_IP_MROUTE
static inline int ip_mroute_opt(int opt)
@@ -228,24 +100,8 @@
#define MFC_HASH(a,b) ((((__force u32)(__be32)a)^(((__force u32)(__be32)b)>>2))&(MFC_LINES-1))
#endif
-#endif
-
-
-#define MFC_ASSERT_THRESH (3*HZ) /* Maximal freq. of asserts */
-
-/*
- * Pseudo messages used by mrouted
- */
-
-#define IGMPMSG_NOCACHE 1 /* Kern cache fill request to mrouted */
-#define IGMPMSG_WRONGVIF 2 /* For PIM assert processing (unused) */
-#define IGMPMSG_WHOLEPKT 3 /* For PIM Register processing */
-
-#ifdef __KERNEL__
struct rtmsg;
extern int ipmr_get_route(struct net *net, struct sk_buff *skb,
__be32 saddr, __be32 daddr,
struct rtmsg *rtm, int nowait);
#endif
-
-#endif
diff --git a/include/linux/mroute6.h b/include/linux/mroute6.h
index 6d8c725..a223561 100644
--- a/include/linux/mroute6.h
+++ b/include/linux/mroute6.h
@@ -1,123 +1,11 @@
#ifndef __LINUX_MROUTE6_H
#define __LINUX_MROUTE6_H
-#include <linux/types.h>
-#include <linux/sockios.h>
-
-/*
- * Based on the MROUTING 3.5 defines primarily to keep
- * source compatibility with BSD.
- *
- * See the pim6sd code for the original history.
- *
- * Protocol Independent Multicast (PIM) data structures included
- * Carlos Picoto (cap@di.fc.ul.pt)
- *
- */
-
-#define MRT6_BASE 200
-#define MRT6_INIT (MRT6_BASE) /* Activate the kernel mroute code */
-#define MRT6_DONE (MRT6_BASE+1) /* Shutdown the kernel mroute */
-#define MRT6_ADD_MIF (MRT6_BASE+2) /* Add a virtual interface */
-#define MRT6_DEL_MIF (MRT6_BASE+3) /* Delete a virtual interface */
-#define MRT6_ADD_MFC (MRT6_BASE+4) /* Add a multicast forwarding entry */
-#define MRT6_DEL_MFC (MRT6_BASE+5) /* Delete a multicast forwarding entry */
-#define MRT6_VERSION (MRT6_BASE+6) /* Get the kernel multicast version */
-#define MRT6_ASSERT (MRT6_BASE+7) /* Activate PIM assert mode */
-#define MRT6_PIM (MRT6_BASE+8) /* enable PIM code */
-#define MRT6_TABLE (MRT6_BASE+9) /* Specify mroute table ID */
-
-#define SIOCGETMIFCNT_IN6 SIOCPROTOPRIVATE /* IP protocol privates */
-#define SIOCGETSGCNT_IN6 (SIOCPROTOPRIVATE+1)
-#define SIOCGETRPF (SIOCPROTOPRIVATE+2)
-
-#define MAXMIFS 32
-typedef unsigned long mifbitmap_t; /* User mode code depends on this lot */
-typedef unsigned short mifi_t;
-#define ALL_MIFS ((mifi_t)(-1))
-
-#ifndef IF_SETSIZE
-#define IF_SETSIZE 256
-#endif
-
-typedef __u32 if_mask;
-#define NIFBITS (sizeof(if_mask) * 8) /* bits per mask */
-
-#if !defined(__KERNEL__)
-#if !defined(DIV_ROUND_UP)
-#define DIV_ROUND_UP(x,y) (((x) + ((y) - 1)) / (y))
-#endif
-#endif
-
-typedef struct if_set {
- if_mask ifs_bits[DIV_ROUND_UP(IF_SETSIZE, NIFBITS)];
-} if_set;
-
-#define IF_SET(n, p) ((p)->ifs_bits[(n)/NIFBITS] |= (1 << ((n) % NIFBITS)))
-#define IF_CLR(n, p) ((p)->ifs_bits[(n)/NIFBITS] &= ~(1 << ((n) % NIFBITS)))
-#define IF_ISSET(n, p) ((p)->ifs_bits[(n)/NIFBITS] & (1 << ((n) % NIFBITS)))
-#define IF_COPY(f, t) bcopy(f, t, sizeof(*(f)))
-#define IF_ZERO(p) bzero(p, sizeof(*(p)))
-
-/*
- * Passed by mrouted for an MRT_ADD_MIF - again we use the
- * mrouted 3.6 structures for compatibility
- */
-
-struct mif6ctl {
- mifi_t mif6c_mifi; /* Index of MIF */
- unsigned char mif6c_flags; /* MIFF_ flags */
- unsigned char vifc_threshold; /* ttl limit */
- __u16 mif6c_pifi; /* the index of the physical IF */
- unsigned int vifc_rate_limit; /* Rate limiter values (NI) */
-};
-
-#define MIFF_REGISTER 0x1 /* register vif */
-
-/*
- * Cache manipulation structures for mrouted and PIMd
- */
-
-struct mf6cctl {
- struct sockaddr_in6 mf6cc_origin; /* Origin of mcast */
- struct sockaddr_in6 mf6cc_mcastgrp; /* Group in question */
- mifi_t mf6cc_parent; /* Where it arrived */
- struct if_set mf6cc_ifset; /* Where it is going */
-};
-
-/*
- * Group count retrieval for pim6sd
- */
-
-struct sioc_sg_req6 {
- struct sockaddr_in6 src;
- struct sockaddr_in6 grp;
- unsigned long pktcnt;
- unsigned long bytecnt;
- unsigned long wrong_if;
-};
-
-/*
- * To get vif packet counts
- */
-
-struct sioc_mif_req6 {
- mifi_t mifi; /* Which iface */
- unsigned long icount; /* In packets */
- unsigned long ocount; /* Out packets */
- unsigned long ibytes; /* In bytes */
- unsigned long obytes; /* Out bytes */
-};
-
-/*
- * That's all usermode folks
- */
-
-#ifdef __KERNEL__
#include <linux/pim.h>
#include <linux/skbuff.h> /* for struct sk_buff_head */
#include <net/net_namespace.h>
+#include <uapi/linux/mroute6.h>
#ifdef CONFIG_IPV6_MROUTE
static inline int ip6_mroute_opt(int opt)
@@ -225,9 +113,6 @@
#define MFC_ASSERT_THRESH (3*HZ) /* Maximal freq. of asserts */
-#endif
-
-#ifdef __KERNEL__
struct rtmsg;
extern int ip6mr_get_route(struct net *net, struct sk_buff *skb,
struct rtmsg *rtm, int nowait);
@@ -246,24 +131,3 @@
}
#endif
#endif
-
-/*
- * Structure used to communicate from kernel to multicast router.
- * We'll overlay the structure onto an MLD header (not an IPv6 heder like igmpmsg{}
- * used for IPv4 implementation). This is because this structure will be passed via an
- * IPv6 raw socket, on which an application will only receiver the payload i.e the data after
- * the IPv6 header and all the extension headers. (See section 3 of RFC 3542)
- */
-
-struct mrt6msg {
-#define MRT6MSG_NOCACHE 1
-#define MRT6MSG_WRONGMIF 2
-#define MRT6MSG_WHOLEPKT 3 /* used for use level encap */
- __u8 im6_mbz; /* must be zero */
- __u8 im6_msgtype; /* what type of message */
- __u16 im6_mif; /* mif rec'd on */
- __u32 im6_pad; /* padding for 64 bit arch */
- struct in6_addr im6_src, im6_dst;
-};
-
-#endif
diff --git a/include/linux/msdos_fs.h b/include/linux/msdos_fs.h
index 11cc2ac..e1b163f9 100644
--- a/include/linux/msdos_fs.h
+++ b/include/linux/msdos_fs.h
@@ -1,174 +1,11 @@
#ifndef _LINUX_MSDOS_FS_H
#define _LINUX_MSDOS_FS_H
-#include <linux/types.h>
-#include <linux/magic.h>
-#include <asm/byteorder.h>
+#include <uapi/linux/msdos_fs.h>
-/*
- * The MS-DOS filesystem constants/structures
- */
-
-#define SECTOR_SIZE 512 /* sector size (bytes) */
-#define SECTOR_BITS 9 /* log2(SECTOR_SIZE) */
-#define MSDOS_DPB (MSDOS_DPS) /* dir entries per block */
-#define MSDOS_DPB_BITS 4 /* log2(MSDOS_DPB) */
-#define MSDOS_DPS (SECTOR_SIZE / sizeof(struct msdos_dir_entry))
-#define MSDOS_DPS_BITS 4 /* log2(MSDOS_DPS) */
-#define MSDOS_LONGNAME 256 /* maximum name length */
-#define CF_LE_W(v) le16_to_cpu(v)
-#define CF_LE_L(v) le32_to_cpu(v)
-#define CT_LE_W(v) cpu_to_le16(v)
-#define CT_LE_L(v) cpu_to_le32(v)
-
-#define MSDOS_ROOT_INO 1 /* The root inode number */
-#define MSDOS_FSINFO_INO 2 /* Used for managing the FSINFO block */
-
-#define MSDOS_DIR_BITS 5 /* log2(sizeof(struct msdos_dir_entry)) */
-
-/* directory limit */
-#define FAT_MAX_DIR_ENTRIES (65536)
-#define FAT_MAX_DIR_SIZE (FAT_MAX_DIR_ENTRIES << MSDOS_DIR_BITS)
-
-#define ATTR_NONE 0 /* no attribute bits */
-#define ATTR_RO 1 /* read-only */
-#define ATTR_HIDDEN 2 /* hidden */
-#define ATTR_SYS 4 /* system */
-#define ATTR_VOLUME 8 /* volume label */
-#define ATTR_DIR 16 /* directory */
-#define ATTR_ARCH 32 /* archived */
-
-/* attribute bits that are copied "as is" */
-#define ATTR_UNUSED (ATTR_VOLUME | ATTR_ARCH | ATTR_SYS | ATTR_HIDDEN)
-/* bits that are used by the Windows 95/Windows NT extended FAT */
-#define ATTR_EXT (ATTR_RO | ATTR_HIDDEN | ATTR_SYS | ATTR_VOLUME)
-
-#define CASE_LOWER_BASE 8 /* base is lower case */
-#define CASE_LOWER_EXT 16 /* extension is lower case */
-
-#define DELETED_FLAG 0xe5 /* marks file as deleted when in name[0] */
-#define IS_FREE(n) (!*(n) || *(n) == DELETED_FLAG)
-
-#define FAT_LFN_LEN 255 /* maximum long name length */
-#define MSDOS_NAME 11 /* maximum name length */
-#define MSDOS_SLOTS 21 /* max # of slots for short and long names */
-#define MSDOS_DOT ". " /* ".", padded to MSDOS_NAME chars */
-#define MSDOS_DOTDOT ".. " /* "..", padded to MSDOS_NAME chars */
-
-#define FAT_FIRST_ENT(s, x) ((MSDOS_SB(s)->fat_bits == 32 ? 0x0FFFFF00 : \
- MSDOS_SB(s)->fat_bits == 16 ? 0xFF00 : 0xF00) | (x))
-
-/* start of data cluster's entry (number of reserved clusters) */
-#define FAT_START_ENT 2
-
-/* maximum number of clusters */
-#define MAX_FAT12 0xFF4
-#define MAX_FAT16 0xFFF4
-#define MAX_FAT32 0x0FFFFFF6
-#define MAX_FAT(s) (MSDOS_SB(s)->fat_bits == 32 ? MAX_FAT32 : \
- MSDOS_SB(s)->fat_bits == 16 ? MAX_FAT16 : MAX_FAT12)
-
-/* bad cluster mark */
-#define BAD_FAT12 0xFF7
-#define BAD_FAT16 0xFFF7
-#define BAD_FAT32 0x0FFFFFF7
-
-/* standard EOF */
-#define EOF_FAT12 0xFFF
-#define EOF_FAT16 0xFFFF
-#define EOF_FAT32 0x0FFFFFFF
-
-#define FAT_ENT_FREE (0)
-#define FAT_ENT_BAD (BAD_FAT32)
-#define FAT_ENT_EOF (EOF_FAT32)
-
-#define FAT_FSINFO_SIG1 0x41615252
-#define FAT_FSINFO_SIG2 0x61417272
-#define IS_FSINFO(x) (le32_to_cpu((x)->signature1) == FAT_FSINFO_SIG1 \
- && le32_to_cpu((x)->signature2) == FAT_FSINFO_SIG2)
-
-struct __fat_dirent {
- long d_ino;
- __kernel_off_t d_off;
- unsigned short d_reclen;
- char d_name[256]; /* We must not include limits.h! */
-};
-
-/*
- * ioctl commands
- */
-#define VFAT_IOCTL_READDIR_BOTH _IOR('r', 1, struct __fat_dirent[2])
-#define VFAT_IOCTL_READDIR_SHORT _IOR('r', 2, struct __fat_dirent[2])
-/* <linux/videotext.h> has used 0x72 ('r') in collision, so skip a few */
-#define FAT_IOCTL_GET_ATTRIBUTES _IOR('r', 0x10, __u32)
-#define FAT_IOCTL_SET_ATTRIBUTES _IOW('r', 0x11, __u32)
-
-struct fat_boot_sector {
- __u8 ignored[3]; /* Boot strap short or near jump */
- __u8 system_id[8]; /* Name - can be used to special case
- partition manager volumes */
- __u8 sector_size[2]; /* bytes per logical sector */
- __u8 sec_per_clus; /* sectors/cluster */
- __le16 reserved; /* reserved sectors */
- __u8 fats; /* number of FATs */
- __u8 dir_entries[2]; /* root directory entries */
- __u8 sectors[2]; /* number of sectors */
- __u8 media; /* media code */
- __le16 fat_length; /* sectors/FAT */
- __le16 secs_track; /* sectors per track */
- __le16 heads; /* number of heads */
- __le32 hidden; /* hidden sectors (unused) */
- __le32 total_sect; /* number of sectors (if sectors == 0) */
-
- /* The following fields are only used by FAT32 */
- __le32 fat32_length; /* sectors/FAT */
- __le16 flags; /* bit 8: fat mirroring, low 4: active fat */
- __u8 version[2]; /* major, minor filesystem version */
- __le32 root_cluster; /* first cluster in root directory */
- __le16 info_sector; /* filesystem info sector */
- __le16 backup_boot; /* backup boot sector */
- __le16 reserved2[6]; /* Unused */
-};
-
-struct fat_boot_fsinfo {
- __le32 signature1; /* 0x41615252L */
- __le32 reserved1[120]; /* Nothing as far as I can tell */
- __le32 signature2; /* 0x61417272L */
- __le32 free_clusters; /* Free cluster count. -1 if unknown */
- __le32 next_cluster; /* Most recently allocated cluster */
- __le32 reserved2[4];
-};
-
-struct msdos_dir_entry {
- __u8 name[MSDOS_NAME];/* name and extension */
- __u8 attr; /* attribute bits */
- __u8 lcase; /* Case for base and extension */
- __u8 ctime_cs; /* Creation time, centiseconds (0-199) */
- __le16 ctime; /* Creation time */
- __le16 cdate; /* Creation date */
- __le16 adate; /* Last access date */
- __le16 starthi; /* High 16 bits of cluster in FAT32 */
- __le16 time,date,start;/* time, date and first cluster */
- __le32 size; /* file size (in bytes) */
-};
-
-/* Up to 13 characters of the name */
-struct msdos_dir_slot {
- __u8 id; /* sequence number for slot */
- __u8 name0_4[10]; /* first 5 characters in name */
- __u8 attr; /* attribute byte */
- __u8 reserved; /* always 0 */
- __u8 alias_checksum; /* checksum for 8.3 alias */
- __u8 name5_10[12]; /* 6 more characters in name */
- __le16 start; /* starting cluster number, 0 in long slots */
- __u8 name11_12[4]; /* last 2 characters in name */
-};
-
-#ifdef __KERNEL__
/* media of boot sector */
static inline int fat_valid_media(u8 media)
{
return 0xf8 <= media || media == 0xf0;
}
-#endif /* !__KERNEL__ */
#endif /* !_LINUX_MSDOS_FS_H */
diff --git a/include/linux/msg.h b/include/linux/msg.h
index 56abf155..7a4b9e9 100644
--- a/include/linux/msg.h
+++ b/include/linux/msg.h
@@ -1,78 +1,8 @@
#ifndef _LINUX_MSG_H
#define _LINUX_MSG_H
-#include <linux/ipc.h>
-
-/* ipcs ctl commands */
-#define MSG_STAT 11
-#define MSG_INFO 12
-
-/* msgrcv options */
-#define MSG_NOERROR 010000 /* no error if message is too big */
-#define MSG_EXCEPT 020000 /* recv any msg except of specified type.*/
-
-/* Obsolete, used only for backwards compatibility and libc5 compiles */
-struct msqid_ds {
- struct ipc_perm msg_perm;
- struct msg *msg_first; /* first message on queue,unused */
- struct msg *msg_last; /* last message in queue,unused */
- __kernel_time_t msg_stime; /* last msgsnd time */
- __kernel_time_t msg_rtime; /* last msgrcv time */
- __kernel_time_t msg_ctime; /* last change time */
- unsigned long msg_lcbytes; /* Reuse junk fields for 32 bit */
- unsigned long msg_lqbytes; /* ditto */
- unsigned short msg_cbytes; /* current number of bytes on queue */
- unsigned short msg_qnum; /* number of messages in queue */
- unsigned short msg_qbytes; /* max number of bytes on queue */
- __kernel_ipc_pid_t msg_lspid; /* pid of last msgsnd */
- __kernel_ipc_pid_t msg_lrpid; /* last receive pid */
-};
-
-/* Include the definition of msqid64_ds */
-#include <asm/msgbuf.h>
-
-/* message buffer for msgsnd and msgrcv calls */
-struct msgbuf {
- long mtype; /* type of message */
- char mtext[1]; /* message text */
-};
-
-/* buffer for msgctl calls IPC_INFO, MSG_INFO */
-struct msginfo {
- int msgpool;
- int msgmap;
- int msgmax;
- int msgmnb;
- int msgmni;
- int msgssz;
- int msgtql;
- unsigned short msgseg;
-};
-
-/*
- * Scaling factor to compute msgmni:
- * the memory dedicated to msg queues (msgmni * msgmnb) should occupy
- * at most 1/MSG_MEM_SCALE of the lowmem (see the formula in ipc/msg.c):
- * up to 8MB : msgmni = 16 (MSGMNI)
- * 4 GB : msgmni = 8K
- * more than 16 GB : msgmni = 32K (IPCMNI)
- */
-#define MSG_MEM_SCALE 32
-
-#define MSGMNI 16 /* <= IPCMNI */ /* max # of msg queue identifiers */
-#define MSGMAX 8192 /* <= INT_MAX */ /* max size of message (bytes) */
-#define MSGMNB 16384 /* <= INT_MAX */ /* default max size of a message queue */
-
-/* unused */
-#define MSGPOOL (MSGMNI * MSGMNB / 1024) /* size in kbytes of message pool */
-#define MSGTQL MSGMNB /* number of system message headers */
-#define MSGMAP MSGMNB /* number of entries in message map */
-#define MSGSSZ 16 /* message segment size */
-#define __MSGSEG ((MSGPOOL * 1024) / MSGSSZ) /* max no. of segments */
-#define MSGSEG (__MSGSEG <= 0xffff ? __MSGSEG : 0xffff)
-
-#ifdef __KERNEL__
#include <linux/list.h>
+#include <uapi/linux/msg.h>
/* one msg_msg structure for each message */
struct msg_msg {
@@ -107,6 +37,4 @@
extern long do_msgrcv(int msqid, long *pmtype, void __user *mtext,
size_t msgsz, long msgtyp, int msgflg);
-#endif /* __KERNEL__ */
-
#endif /* _LINUX_MSG_H */
diff --git a/include/linux/n_r3964.h b/include/linux/n_r3964.h
index 54b8e0d..5d0b2a1 100644
--- a/include/linux/n_r3964.h
+++ b/include/linux/n_r3964.h
@@ -43,15 +43,12 @@
*
*
*/
-
#ifndef __LINUX_N_R3964_H__
#define __LINUX_N_R3964_H__
-/* line disciplines for r3964 protocol */
-
-#ifdef __KERNEL__
#include <linux/param.h>
+#include <uapi/linux/n_r3964.h>
/*
* Common ascii handshake characters:
@@ -73,32 +70,6 @@
#define R3964_TO_RX_PANIC ((4000)*HZ/1000)
#define R3964_MAX_RETRIES 5
-#endif
-
-/*
- * Ioctl-commands
- */
-
-#define R3964_ENABLE_SIGNALS 0x5301
-#define R3964_SETPRIORITY 0x5302
-#define R3964_USE_BCC 0x5303
-#define R3964_READ_TELEGRAM 0x5304
-
-/* Options for R3964_SETPRIORITY */
-#define R3964_MASTER 0
-#define R3964_SLAVE 1
-
-/* Options for R3964_ENABLE_SIGNALS */
-#define R3964_SIG_ACK 0x0001
-#define R3964_SIG_DATA 0x0002
-#define R3964_SIG_ALL 0x000f
-#define R3964_SIG_NONE 0x0000
-#define R3964_USE_SIGIO 0x1000
-
-/*
- * r3964 operation states:
- */
-#ifdef __KERNEL__
enum { R3964_IDLE,
R3964_TX_REQUEST, R3964_TRANSMITTING,
@@ -127,29 +98,6 @@
};
-#endif
-
-/* types for msg_id: */
-enum {R3964_MSG_ACK=1, R3964_MSG_DATA };
-
-#define R3964_MAX_MSG_COUNT 32
-
-/* error codes for client messages */
-#define R3964_OK 0 /* no error. */
-#define R3964_TX_FAIL -1 /* transmission error, block NOT sent */
-#define R3964_OVERFLOW -2 /* msg queue overflow */
-
-/* the client gets this struct when calling read(fd,...): */
-struct r3964_client_message {
- int msg_id;
- int arg;
- int error_code;
-};
-
-#define R3964_MTU 256
-
-
-#ifdef __KERNEL__
struct r3964_block_header;
@@ -226,6 +174,4 @@
int nRetry;
};
-#endif
-
#endif
diff --git a/include/linux/nbd.h b/include/linux/nbd.h
index 5c86e2b..4871170 100644
--- a/include/linux/nbd.h
+++ b/include/linux/nbd.h
@@ -11,45 +11,13 @@
* 2004/02/19 Paul Clements
* Removed PARANOIA, plus various cleanup and comments
*/
-
#ifndef LINUX_NBD_H
#define LINUX_NBD_H
-#include <linux/types.h>
-
-#define NBD_SET_SOCK _IO( 0xab, 0 )
-#define NBD_SET_BLKSIZE _IO( 0xab, 1 )
-#define NBD_SET_SIZE _IO( 0xab, 2 )
-#define NBD_DO_IT _IO( 0xab, 3 )
-#define NBD_CLEAR_SOCK _IO( 0xab, 4 )
-#define NBD_CLEAR_QUE _IO( 0xab, 5 )
-#define NBD_PRINT_DEBUG _IO( 0xab, 6 )
-#define NBD_SET_SIZE_BLOCKS _IO( 0xab, 7 )
-#define NBD_DISCONNECT _IO( 0xab, 8 )
-#define NBD_SET_TIMEOUT _IO( 0xab, 9 )
-#define NBD_SET_FLAGS _IO( 0xab, 10)
-
-enum {
- NBD_CMD_READ = 0,
- NBD_CMD_WRITE = 1,
- NBD_CMD_DISC = 2,
- /* there is a gap here to match userspace */
- NBD_CMD_TRIM = 4
-};
-
-/* values for flags field */
-#define NBD_FLAG_HAS_FLAGS (1 << 0) /* nbd-server supports flags */
-#define NBD_FLAG_READ_ONLY (1 << 1) /* device is read-only */
-/* there is a gap here to match userspace */
-#define NBD_FLAG_SEND_TRIM (1 << 5) /* send trim/discard */
-
-#define nbd_cmd(req) ((req)->cmd[0])
-
-/* userspace doesn't need the nbd_device structure */
-#ifdef __KERNEL__
#include <linux/wait.h>
#include <linux/mutex.h>
+#include <uapi/linux/nbd.h>
struct request;
@@ -76,32 +44,3 @@
};
#endif
-
-/* These are sent over the network in the request/reply magic fields */
-
-#define NBD_REQUEST_MAGIC 0x25609513
-#define NBD_REPLY_MAGIC 0x67446698
-/* Do *not* use magics: 0x12560953 0x96744668. */
-
-/*
- * This is the packet used for communication between client and
- * server. All data are in network byte order.
- */
-struct nbd_request {
- __be32 magic;
- __be32 type; /* == READ || == WRITE */
- char handle[8];
- __be64 from;
- __be32 len;
-} __attribute__((packed));
-
-/*
- * This is the reply packet that nbd-server sends back to the client after
- * it has completed an I/O request (or an error occurs).
- */
-struct nbd_reply {
- __be32 magic;
- __be32 error; /* 0 = ok, else error */
- char handle[8]; /* handle you got from request */
-};
-#endif
diff --git a/include/linux/net.h b/include/linux/net.h
index 6ab31ca..aa16731 100644
--- a/include/linux/net.h
+++ b/include/linux/net.h
@@ -18,49 +18,13 @@
#ifndef _LINUX_NET_H
#define _LINUX_NET_H
-#include <linux/socket.h>
-#include <asm/socket.h>
-
-#define NPROTO AF_MAX
-
-#define SYS_SOCKET 1 /* sys_socket(2) */
-#define SYS_BIND 2 /* sys_bind(2) */
-#define SYS_CONNECT 3 /* sys_connect(2) */
-#define SYS_LISTEN 4 /* sys_listen(2) */
-#define SYS_ACCEPT 5 /* sys_accept(2) */
-#define SYS_GETSOCKNAME 6 /* sys_getsockname(2) */
-#define SYS_GETPEERNAME 7 /* sys_getpeername(2) */
-#define SYS_SOCKETPAIR 8 /* sys_socketpair(2) */
-#define SYS_SEND 9 /* sys_send(2) */
-#define SYS_RECV 10 /* sys_recv(2) */
-#define SYS_SENDTO 11 /* sys_sendto(2) */
-#define SYS_RECVFROM 12 /* sys_recvfrom(2) */
-#define SYS_SHUTDOWN 13 /* sys_shutdown(2) */
-#define SYS_SETSOCKOPT 14 /* sys_setsockopt(2) */
-#define SYS_GETSOCKOPT 15 /* sys_getsockopt(2) */
-#define SYS_SENDMSG 16 /* sys_sendmsg(2) */
-#define SYS_RECVMSG 17 /* sys_recvmsg(2) */
-#define SYS_ACCEPT4 18 /* sys_accept4(2) */
-#define SYS_RECVMMSG 19 /* sys_recvmmsg(2) */
-#define SYS_SENDMMSG 20 /* sys_sendmmsg(2) */
-
-typedef enum {
- SS_FREE = 0, /* not allocated */
- SS_UNCONNECTED, /* unconnected to any socket */
- SS_CONNECTING, /* in process of connecting */
- SS_CONNECTED, /* connected to socket */
- SS_DISCONNECTING /* in process of disconnecting */
-} socket_state;
-
-#define __SO_ACCEPTCON (1 << 16) /* performed a listen */
-
-#ifdef __KERNEL__
#include <linux/stringify.h>
#include <linux/random.h>
#include <linux/wait.h>
#include <linux/fcntl.h> /* For O_CLOEXEC and O_NONBLOCK */
#include <linux/kmemcheck.h>
#include <linux/rcupdate.h>
+#include <uapi/linux/net.h>
struct poll_table_struct;
struct pipe_inode_info;
@@ -319,5 +283,4 @@
#define MODULE_ALIAS_NET_PF_PROTO_NAME(pf, proto, name) \
MODULE_ALIAS("net-pf-" __stringify(pf) "-proto-" __stringify(proto) \
name)
-#endif /* __KERNEL__ */
#endif /* _LINUX_NET_H */
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 561c8bc..f8eda02 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -25,12 +25,6 @@
#ifndef _LINUX_NETDEVICE_H
#define _LINUX_NETDEVICE_H
-#include <linux/if.h>
-#include <linux/if_ether.h>
-#include <linux/if_packet.h>
-#include <linux/if_link.h>
-
-#ifdef __KERNEL__
#include <linux/pm_qos.h>
#include <linux/timer.h>
#include <linux/bug.h>
@@ -55,6 +49,7 @@
#include <linux/netdev_features.h>
#include <linux/neighbour.h>
+#include <uapi/linux/netdevice.h>
struct netpoll_info;
struct device;
@@ -133,14 +128,6 @@
return false;
}
-#endif
-
-#define MAX_ADDR_LEN 32 /* Largest hardware address length */
-
-/* Initial net device group. All devices belong to group 0 by default. */
-#define INIT_NETDEV_GROUP 0
-
-#ifdef __KERNEL__
/*
* Compute the worst case header length according to the protocols
* used.
@@ -196,21 +183,6 @@
unsigned long tx_compressed;
};
-#endif /* __KERNEL__ */
-
-
-/* Media selection options. */
-enum {
- IF_PORT_UNKNOWN = 0,
- IF_PORT_10BASE2,
- IF_PORT_10BASET,
- IF_PORT_AUI,
- IF_PORT_100BASET,
- IF_PORT_100BASETX,
- IF_PORT_100BASEFX
-};
-
-#ifdef __KERNEL__
#include <linux/cache.h>
#include <linux/skbuff.h>
@@ -2844,6 +2816,4 @@
})
#endif
-#endif /* __KERNEL__ */
-
#endif /* _LINUX_NETDEVICE_H */
diff --git a/include/linux/netfilter.h b/include/linux/netfilter.h
index 1dcf2a3..ee14284 100644
--- a/include/linux/netfilter.h
+++ b/include/linux/netfilter.h
@@ -1,7 +1,6 @@
#ifndef __LINUX_NETFILTER_H
#define __LINUX_NETFILTER_H
-#ifdef __KERNEL__
#include <linux/init.h>
#include <linux/skbuff.h>
#include <linux/net.h>
@@ -10,75 +9,7 @@
#include <linux/in6.h>
#include <linux/wait.h>
#include <linux/list.h>
-#endif
-#include <linux/types.h>
-#include <linux/compiler.h>
-#include <linux/sysctl.h>
-
-/* Responses from hook functions. */
-#define NF_DROP 0
-#define NF_ACCEPT 1
-#define NF_STOLEN 2
-#define NF_QUEUE 3
-#define NF_REPEAT 4
-#define NF_STOP 5
-#define NF_MAX_VERDICT NF_STOP
-
-/* we overload the higher bits for encoding auxiliary data such as the queue
- * number or errno values. Not nice, but better than additional function
- * arguments. */
-#define NF_VERDICT_MASK 0x000000ff
-
-/* extra verdict flags have mask 0x0000ff00 */
-#define NF_VERDICT_FLAG_QUEUE_BYPASS 0x00008000
-
-/* queue number (NF_QUEUE) or errno (NF_DROP) */
-#define NF_VERDICT_QMASK 0xffff0000
-#define NF_VERDICT_QBITS 16
-
-#define NF_QUEUE_NR(x) ((((x) << 16) & NF_VERDICT_QMASK) | NF_QUEUE)
-
-#define NF_DROP_ERR(x) (((-x) << 16) | NF_DROP)
-
-/* only for userspace compatibility */
-#ifndef __KERNEL__
-/* Generic cache responses from hook functions.
- <= 0x2000 is used for protocol-flags. */
-#define NFC_UNKNOWN 0x4000
-#define NFC_ALTERED 0x8000
-
-/* NF_VERDICT_BITS should be 8 now, but userspace might break if this changes */
-#define NF_VERDICT_BITS 16
-#endif
-
-enum nf_inet_hooks {
- NF_INET_PRE_ROUTING,
- NF_INET_LOCAL_IN,
- NF_INET_FORWARD,
- NF_INET_LOCAL_OUT,
- NF_INET_POST_ROUTING,
- NF_INET_NUMHOOKS
-};
-
-enum {
- NFPROTO_UNSPEC = 0,
- NFPROTO_IPV4 = 2,
- NFPROTO_ARP = 3,
- NFPROTO_BRIDGE = 7,
- NFPROTO_IPV6 = 10,
- NFPROTO_DECNET = 12,
- NFPROTO_NUMPROTO,
-};
-
-union nf_inet_addr {
- __u32 all[4];
- __be32 ip;
- __be32 ip6[4];
- struct in_addr in;
- struct in6_addr in6;
-};
-
-#ifdef __KERNEL__
+#include <uapi/linux/netfilter.h>
#ifdef CONFIG_NETFILTER
static inline int NF_DROP_GETERR(int verdict)
{
@@ -411,5 +342,4 @@
static inline void nf_ct_attach(struct sk_buff *new, struct sk_buff *skb) {}
#endif
-#endif /*__KERNEL__*/
#endif /*__LINUX_NETFILTER_H*/
diff --git a/include/linux/netfilter_bridge.h b/include/linux/netfilter_bridge.h
index 31d2844..dfb4d9e 100644
--- a/include/linux/netfilter_bridge.h
+++ b/include/linux/netfilter_bridge.h
@@ -1,30 +1,8 @@
#ifndef __LINUX_BRIDGE_NETFILTER_H
#define __LINUX_BRIDGE_NETFILTER_H
-/* bridge-specific defines for netfilter.
- */
+#include <uapi/linux/netfilter_bridge.h>
-#include <linux/netfilter.h>
-#include <linux/if_ether.h>
-#include <linux/if_vlan.h>
-#include <linux/if_pppox.h>
-
-/* Bridge Hooks */
-/* After promisc drops, checksum checks. */
-#define NF_BR_PRE_ROUTING 0
-/* If the packet is destined for this box. */
-#define NF_BR_LOCAL_IN 1
-/* If the packet is destined for another interface. */
-#define NF_BR_FORWARD 2
-/* Packets coming from a local process. */
-#define NF_BR_LOCAL_OUT 3
-/* Packets about to hit the wire. */
-#define NF_BR_POST_ROUTING 4
-/* Not really a hook, but used for the ebtables broute table */
-#define NF_BR_BROUTING 5
-#define NF_BR_NUMHOOKS 6
-
-#ifdef __KERNEL__
enum nf_br_hook_priorities {
NF_BR_PRI_FIRST = INT_MIN,
@@ -118,5 +96,4 @@
#define br_drop_fake_rtable(skb) do { } while (0)
#endif /* CONFIG_BRIDGE_NETFILTER */
-#endif /* __KERNEL__ */
#endif
diff --git a/include/linux/netfilter_ipv4.h b/include/linux/netfilter_ipv4.h
index b962dfc..dfaf116 100644
--- a/include/linux/netfilter_ipv4.h
+++ b/include/linux/netfilter_ipv4.h
@@ -1,86 +1,12 @@
-#ifndef __LINUX_IP_NETFILTER_H
-#define __LINUX_IP_NETFILTER_H
-
/* IPv4-specific defines for netfilter.
* (C)1998 Rusty Russell -- This code is GPL.
*/
+#ifndef __LINUX_IP_NETFILTER_H
+#define __LINUX_IP_NETFILTER_H
-#include <linux/netfilter.h>
+#include <uapi/linux/netfilter_ipv4.h>
-/* only for userspace compatibility */
-#ifndef __KERNEL__
-
-#include <limits.h> /* for INT_MIN, INT_MAX */
-
-/* IP Cache bits. */
-/* Src IP address. */
-#define NFC_IP_SRC 0x0001
-/* Dest IP address. */
-#define NFC_IP_DST 0x0002
-/* Input device. */
-#define NFC_IP_IF_IN 0x0004
-/* Output device. */
-#define NFC_IP_IF_OUT 0x0008
-/* TOS. */
-#define NFC_IP_TOS 0x0010
-/* Protocol. */
-#define NFC_IP_PROTO 0x0020
-/* IP options. */
-#define NFC_IP_OPTIONS 0x0040
-/* Frag & flags. */
-#define NFC_IP_FRAG 0x0080
-
-/* Per-protocol information: only matters if proto match. */
-/* TCP flags. */
-#define NFC_IP_TCPFLAGS 0x0100
-/* Source port. */
-#define NFC_IP_SRC_PT 0x0200
-/* Dest port. */
-#define NFC_IP_DST_PT 0x0400
-/* Something else about the proto */
-#define NFC_IP_PROTO_UNKNOWN 0x2000
-
-/* IP Hooks */
-/* After promisc drops, checksum checks. */
-#define NF_IP_PRE_ROUTING 0
-/* If the packet is destined for this box. */
-#define NF_IP_LOCAL_IN 1
-/* If the packet is destined for another interface. */
-#define NF_IP_FORWARD 2
-/* Packets coming from a local process. */
-#define NF_IP_LOCAL_OUT 3
-/* Packets about to hit the wire. */
-#define NF_IP_POST_ROUTING 4
-#define NF_IP_NUMHOOKS 5
-#endif /* ! __KERNEL__ */
-
-enum nf_ip_hook_priorities {
- NF_IP_PRI_FIRST = INT_MIN,
- NF_IP_PRI_CONNTRACK_DEFRAG = -400,
- NF_IP_PRI_RAW = -300,
- NF_IP_PRI_SELINUX_FIRST = -225,
- NF_IP_PRI_CONNTRACK = -200,
- NF_IP_PRI_MANGLE = -150,
- NF_IP_PRI_NAT_DST = -100,
- NF_IP_PRI_FILTER = 0,
- NF_IP_PRI_SECURITY = 50,
- NF_IP_PRI_NAT_SRC = 100,
- NF_IP_PRI_SELINUX_LAST = 225,
- NF_IP_PRI_CONNTRACK_HELPER = 300,
- NF_IP_PRI_CONNTRACK_CONFIRM = INT_MAX,
- NF_IP_PRI_LAST = INT_MAX,
-};
-
-/* Arguments for setsockopt SOL_IP: */
-/* 2.0 firewalling went from 64 through 71 (and +256, +512, etc). */
-/* 2.2 firewalling (+ masq) went from 64 through 76 */
-/* 2.4 firewalling went 64 through 67. */
-#define SO_ORIGINAL_DST 80
-
-#ifdef __KERNEL__
extern int ip_route_me_harder(struct sk_buff *skb, unsigned addr_type);
extern __sum16 nf_ip_checksum(struct sk_buff *skb, unsigned int hook,
unsigned int dataoff, u_int8_t protocol);
-#endif /*__KERNEL__*/
-
#endif /*__LINUX_IP_NETFILTER_H*/
diff --git a/include/linux/netfilter_ipv6.h b/include/linux/netfilter_ipv6.h
index 7c8a513..98ffb54 100644
--- a/include/linux/netfilter_ipv6.h
+++ b/include/linux/netfilter_ipv6.h
@@ -1,81 +1,14 @@
-#ifndef __LINUX_IP6_NETFILTER_H
-#define __LINUX_IP6_NETFILTER_H
-
/* IPv6-specific defines for netfilter.
* (C)1998 Rusty Russell -- This code is GPL.
* (C)1999 David Jeffery
* this header was blatantly ripped from netfilter_ipv4.h
* it's amazing what adding a bunch of 6s can do =8^)
*/
+#ifndef __LINUX_IP6_NETFILTER_H
+#define __LINUX_IP6_NETFILTER_H
-#include <linux/netfilter.h>
+#include <uapi/linux/netfilter_ipv6.h>
-/* only for userspace compatibility */
-#ifndef __KERNEL__
-
-#include <limits.h> /* for INT_MIN, INT_MAX */
-
-/* IP Cache bits. */
-/* Src IP address. */
-#define NFC_IP6_SRC 0x0001
-/* Dest IP address. */
-#define NFC_IP6_DST 0x0002
-/* Input device. */
-#define NFC_IP6_IF_IN 0x0004
-/* Output device. */
-#define NFC_IP6_IF_OUT 0x0008
-/* TOS. */
-#define NFC_IP6_TOS 0x0010
-/* Protocol. */
-#define NFC_IP6_PROTO 0x0020
-/* IP options. */
-#define NFC_IP6_OPTIONS 0x0040
-/* Frag & flags. */
-#define NFC_IP6_FRAG 0x0080
-
-
-/* Per-protocol information: only matters if proto match. */
-/* TCP flags. */
-#define NFC_IP6_TCPFLAGS 0x0100
-/* Source port. */
-#define NFC_IP6_SRC_PT 0x0200
-/* Dest port. */
-#define NFC_IP6_DST_PT 0x0400
-/* Something else about the proto */
-#define NFC_IP6_PROTO_UNKNOWN 0x2000
-
-/* IP6 Hooks */
-/* After promisc drops, checksum checks. */
-#define NF_IP6_PRE_ROUTING 0
-/* If the packet is destined for this box. */
-#define NF_IP6_LOCAL_IN 1
-/* If the packet is destined for another interface. */
-#define NF_IP6_FORWARD 2
-/* Packets coming from a local process. */
-#define NF_IP6_LOCAL_OUT 3
-/* Packets about to hit the wire. */
-#define NF_IP6_POST_ROUTING 4
-#define NF_IP6_NUMHOOKS 5
-#endif /* ! __KERNEL__ */
-
-
-enum nf_ip6_hook_priorities {
- NF_IP6_PRI_FIRST = INT_MIN,
- NF_IP6_PRI_CONNTRACK_DEFRAG = -400,
- NF_IP6_PRI_RAW = -300,
- NF_IP6_PRI_SELINUX_FIRST = -225,
- NF_IP6_PRI_CONNTRACK = -200,
- NF_IP6_PRI_MANGLE = -150,
- NF_IP6_PRI_NAT_DST = -100,
- NF_IP6_PRI_FILTER = 0,
- NF_IP6_PRI_SECURITY = 50,
- NF_IP6_PRI_NAT_SRC = 100,
- NF_IP6_PRI_SELINUX_LAST = 225,
- NF_IP6_PRI_CONNTRACK_HELPER = 300,
- NF_IP6_PRI_LAST = INT_MAX,
-};
-
-#ifdef __KERNEL__
#ifdef CONFIG_NETFILTER
extern int ip6_route_me_harder(struct sk_buff *skb);
@@ -89,6 +22,4 @@
static inline void ipv6_netfilter_fini(void) { return; }
#endif /* CONFIG_NETFILTER */
-#endif /* __KERNEL__ */
-
#endif /*__LINUX_IP6_NETFILTER_H*/
diff --git a/include/linux/netlink.h b/include/linux/netlink.h
index 6d3af05c..e0f746b 100644
--- a/include/linux/netlink.h
+++ b/include/linux/netlink.h
@@ -1,160 +1,12 @@
#ifndef __LINUX_NETLINK_H
#define __LINUX_NETLINK_H
-#include <linux/socket.h> /* for __kernel_sa_family_t */
-#include <linux/types.h>
-
-#define NETLINK_ROUTE 0 /* Routing/device hook */
-#define NETLINK_UNUSED 1 /* Unused number */
-#define NETLINK_USERSOCK 2 /* Reserved for user mode socket protocols */
-#define NETLINK_FIREWALL 3 /* Unused number, formerly ip_queue */
-#define NETLINK_SOCK_DIAG 4 /* socket monitoring */
-#define NETLINK_NFLOG 5 /* netfilter/iptables ULOG */
-#define NETLINK_XFRM 6 /* ipsec */
-#define NETLINK_SELINUX 7 /* SELinux event notifications */
-#define NETLINK_ISCSI 8 /* Open-iSCSI */
-#define NETLINK_AUDIT 9 /* auditing */
-#define NETLINK_FIB_LOOKUP 10
-#define NETLINK_CONNECTOR 11
-#define NETLINK_NETFILTER 12 /* netfilter subsystem */
-#define NETLINK_IP6_FW 13
-#define NETLINK_DNRTMSG 14 /* DECnet routing messages */
-#define NETLINK_KOBJECT_UEVENT 15 /* Kernel messages to userspace */
-#define NETLINK_GENERIC 16
-/* leave room for NETLINK_DM (DM Events) */
-#define NETLINK_SCSITRANSPORT 18 /* SCSI Transports */
-#define NETLINK_ECRYPTFS 19
-#define NETLINK_RDMA 20
-#define NETLINK_CRYPTO 21 /* Crypto layer */
-
-#define NETLINK_INET_DIAG NETLINK_SOCK_DIAG
-
-#define MAX_LINKS 32
-
-struct sockaddr_nl {
- __kernel_sa_family_t nl_family; /* AF_NETLINK */
- unsigned short nl_pad; /* zero */
- __u32 nl_pid; /* port ID */
- __u32 nl_groups; /* multicast groups mask */
-};
-
-struct nlmsghdr {
- __u32 nlmsg_len; /* Length of message including header */
- __u16 nlmsg_type; /* Message content */
- __u16 nlmsg_flags; /* Additional flags */
- __u32 nlmsg_seq; /* Sequence number */
- __u32 nlmsg_pid; /* Sending process port ID */
-};
-
-/* Flags values */
-
-#define NLM_F_REQUEST 1 /* It is request message. */
-#define NLM_F_MULTI 2 /* Multipart message, terminated by NLMSG_DONE */
-#define NLM_F_ACK 4 /* Reply with ack, with zero or error code */
-#define NLM_F_ECHO 8 /* Echo this request */
-#define NLM_F_DUMP_INTR 16 /* Dump was inconsistent due to sequence change */
-
-/* Modifiers to GET request */
-#define NLM_F_ROOT 0x100 /* specify tree root */
-#define NLM_F_MATCH 0x200 /* return all matching */
-#define NLM_F_ATOMIC 0x400 /* atomic GET */
-#define NLM_F_DUMP (NLM_F_ROOT|NLM_F_MATCH)
-
-/* Modifiers to NEW request */
-#define NLM_F_REPLACE 0x100 /* Override existing */
-#define NLM_F_EXCL 0x200 /* Do not touch, if it exists */
-#define NLM_F_CREATE 0x400 /* Create, if it does not exist */
-#define NLM_F_APPEND 0x800 /* Add to end of list */
-
-/*
- 4.4BSD ADD NLM_F_CREATE|NLM_F_EXCL
- 4.4BSD CHANGE NLM_F_REPLACE
-
- True CHANGE NLM_F_CREATE|NLM_F_REPLACE
- Append NLM_F_CREATE
- Check NLM_F_EXCL
- */
-
-#define NLMSG_ALIGNTO 4U
-#define NLMSG_ALIGN(len) ( ((len)+NLMSG_ALIGNTO-1) & ~(NLMSG_ALIGNTO-1) )
-#define NLMSG_HDRLEN ((int) NLMSG_ALIGN(sizeof(struct nlmsghdr)))
-#define NLMSG_LENGTH(len) ((len)+NLMSG_ALIGN(NLMSG_HDRLEN))
-#define NLMSG_SPACE(len) NLMSG_ALIGN(NLMSG_LENGTH(len))
-#define NLMSG_DATA(nlh) ((void*)(((char*)nlh) + NLMSG_LENGTH(0)))
-#define NLMSG_NEXT(nlh,len) ((len) -= NLMSG_ALIGN((nlh)->nlmsg_len), \
- (struct nlmsghdr*)(((char*)(nlh)) + NLMSG_ALIGN((nlh)->nlmsg_len)))
-#define NLMSG_OK(nlh,len) ((len) >= (int)sizeof(struct nlmsghdr) && \
- (nlh)->nlmsg_len >= sizeof(struct nlmsghdr) && \
- (nlh)->nlmsg_len <= (len))
-#define NLMSG_PAYLOAD(nlh,len) ((nlh)->nlmsg_len - NLMSG_SPACE((len)))
-
-#define NLMSG_NOOP 0x1 /* Nothing. */
-#define NLMSG_ERROR 0x2 /* Error */
-#define NLMSG_DONE 0x3 /* End of a dump */
-#define NLMSG_OVERRUN 0x4 /* Data lost */
-
-#define NLMSG_MIN_TYPE 0x10 /* < 0x10: reserved control messages */
-
-struct nlmsgerr {
- int error;
- struct nlmsghdr msg;
-};
-
-#define NETLINK_ADD_MEMBERSHIP 1
-#define NETLINK_DROP_MEMBERSHIP 2
-#define NETLINK_PKTINFO 3
-#define NETLINK_BROADCAST_ERROR 4
-#define NETLINK_NO_ENOBUFS 5
-
-struct nl_pktinfo {
- __u32 group;
-};
-
-#define NET_MAJOR 36 /* Major 36 is reserved for networking */
-
-enum {
- NETLINK_UNCONNECTED = 0,
- NETLINK_CONNECTED,
-};
-
-/*
- * <------- NLA_HDRLEN ------> <-- NLA_ALIGN(payload)-->
- * +---------------------+- - -+- - - - - - - - - -+- - -+
- * | Header | Pad | Payload | Pad |
- * | (struct nlattr) | ing | | ing |
- * +---------------------+- - -+- - - - - - - - - -+- - -+
- * <-------------- nlattr->nla_len -------------->
- */
-
-struct nlattr {
- __u16 nla_len;
- __u16 nla_type;
-};
-
-/*
- * nla_type (16 bits)
- * +---+---+-------------------------------+
- * | N | O | Attribute Type |
- * +---+---+-------------------------------+
- * N := Carries nested attributes
- * O := Payload stored in network byte order
- *
- * Note: The N and O flag are mutually exclusive.
- */
-#define NLA_F_NESTED (1 << 15)
-#define NLA_F_NET_BYTEORDER (1 << 14)
-#define NLA_TYPE_MASK ~(NLA_F_NESTED | NLA_F_NET_BYTEORDER)
-
-#define NLA_ALIGNTO 4
-#define NLA_ALIGN(len) (((len) + NLA_ALIGNTO - 1) & ~(NLA_ALIGNTO - 1))
-#define NLA_HDRLEN ((int) NLA_ALIGN(sizeof(struct nlattr)))
-
-#ifdef __KERNEL__
#include <linux/capability.h>
#include <linux/skbuff.h>
#include <linux/export.h>
#include <net/scm.h>
+#include <uapi/linux/netlink.h>
struct net;
@@ -283,6 +135,4 @@
return __netlink_dump_start(ssk, skb, nlh, control);
}
-#endif /* __KERNEL__ */
-
#endif /* __LINUX_NETLINK_H */
diff --git a/include/linux/nfs.h b/include/linux/nfs.h
index 6d1fb63..3e794c1 100644
--- a/include/linux/nfs.h
+++ b/include/linux/nfs.h
@@ -7,130 +7,9 @@
#ifndef _LINUX_NFS_H
#define _LINUX_NFS_H
-#define NFS_PROGRAM 100003
-#define NFS_PORT 2049
-#define NFS_MAXDATA 8192
-#define NFS_MAXPATHLEN 1024
-#define NFS_MAXNAMLEN 255
-#define NFS_MAXGROUPS 16
-#define NFS_FHSIZE 32
-#define NFS_COOKIESIZE 4
-#define NFS_FIFO_DEV (-1)
-#define NFSMODE_FMT 0170000
-#define NFSMODE_DIR 0040000
-#define NFSMODE_CHR 0020000
-#define NFSMODE_BLK 0060000
-#define NFSMODE_REG 0100000
-#define NFSMODE_LNK 0120000
-#define NFSMODE_SOCK 0140000
-#define NFSMODE_FIFO 0010000
-
-#define NFS_MNT_PROGRAM 100005
-#define NFS_MNT_VERSION 1
-#define NFS_MNT3_VERSION 3
-
-#define NFS_PIPE_DIRNAME "nfs"
-
-/*
- * NFS stats. The good thing with these values is that NFSv3 errors are
- * a superset of NFSv2 errors (with the exception of NFSERR_WFLUSH which
- * no-one uses anyway), so we can happily mix code as long as we make sure
- * no NFSv3 errors are returned to NFSv2 clients.
- * Error codes that have a `--' in the v2 column are not part of the
- * standard, but seem to be widely used nevertheless.
- */
- enum nfs_stat {
- NFS_OK = 0, /* v2 v3 v4 */
- NFSERR_PERM = 1, /* v2 v3 v4 */
- NFSERR_NOENT = 2, /* v2 v3 v4 */
- NFSERR_IO = 5, /* v2 v3 v4 */
- NFSERR_NXIO = 6, /* v2 v3 v4 */
- NFSERR_EAGAIN = 11, /* v2 v3 */
- NFSERR_ACCES = 13, /* v2 v3 v4 */
- NFSERR_EXIST = 17, /* v2 v3 v4 */
- NFSERR_XDEV = 18, /* v3 v4 */
- NFSERR_NODEV = 19, /* v2 v3 v4 */
- NFSERR_NOTDIR = 20, /* v2 v3 v4 */
- NFSERR_ISDIR = 21, /* v2 v3 v4 */
- NFSERR_INVAL = 22, /* v2 v3 v4 */
- NFSERR_FBIG = 27, /* v2 v3 v4 */
- NFSERR_NOSPC = 28, /* v2 v3 v4 */
- NFSERR_ROFS = 30, /* v2 v3 v4 */
- NFSERR_MLINK = 31, /* v3 v4 */
- NFSERR_OPNOTSUPP = 45, /* v2 v3 */
- NFSERR_NAMETOOLONG = 63, /* v2 v3 v4 */
- NFSERR_NOTEMPTY = 66, /* v2 v3 v4 */
- NFSERR_DQUOT = 69, /* v2 v3 v4 */
- NFSERR_STALE = 70, /* v2 v3 v4 */
- NFSERR_REMOTE = 71, /* v2 v3 */
- NFSERR_WFLUSH = 99, /* v2 */
- NFSERR_BADHANDLE = 10001, /* v3 v4 */
- NFSERR_NOT_SYNC = 10002, /* v3 */
- NFSERR_BAD_COOKIE = 10003, /* v3 v4 */
- NFSERR_NOTSUPP = 10004, /* v3 v4 */
- NFSERR_TOOSMALL = 10005, /* v3 v4 */
- NFSERR_SERVERFAULT = 10006, /* v3 v4 */
- NFSERR_BADTYPE = 10007, /* v3 v4 */
- NFSERR_JUKEBOX = 10008, /* v3 v4 */
- NFSERR_SAME = 10009, /* v4 */
- NFSERR_DENIED = 10010, /* v4 */
- NFSERR_EXPIRED = 10011, /* v4 */
- NFSERR_LOCKED = 10012, /* v4 */
- NFSERR_GRACE = 10013, /* v4 */
- NFSERR_FHEXPIRED = 10014, /* v4 */
- NFSERR_SHARE_DENIED = 10015, /* v4 */
- NFSERR_WRONGSEC = 10016, /* v4 */
- NFSERR_CLID_INUSE = 10017, /* v4 */
- NFSERR_RESOURCE = 10018, /* v4 */
- NFSERR_MOVED = 10019, /* v4 */
- NFSERR_NOFILEHANDLE = 10020, /* v4 */
- NFSERR_MINOR_VERS_MISMATCH = 10021, /* v4 */
- NFSERR_STALE_CLIENTID = 10022, /* v4 */
- NFSERR_STALE_STATEID = 10023, /* v4 */
- NFSERR_OLD_STATEID = 10024, /* v4 */
- NFSERR_BAD_STATEID = 10025, /* v4 */
- NFSERR_BAD_SEQID = 10026, /* v4 */
- NFSERR_NOT_SAME = 10027, /* v4 */
- NFSERR_LOCK_RANGE = 10028, /* v4 */
- NFSERR_SYMLINK = 10029, /* v4 */
- NFSERR_RESTOREFH = 10030, /* v4 */
- NFSERR_LEASE_MOVED = 10031, /* v4 */
- NFSERR_ATTRNOTSUPP = 10032, /* v4 */
- NFSERR_NO_GRACE = 10033, /* v4 */
- NFSERR_RECLAIM_BAD = 10034, /* v4 */
- NFSERR_RECLAIM_CONFLICT = 10035,/* v4 */
- NFSERR_BAD_XDR = 10036, /* v4 */
- NFSERR_LOCKS_HELD = 10037, /* v4 */
- NFSERR_OPENMODE = 10038, /* v4 */
- NFSERR_BADOWNER = 10039, /* v4 */
- NFSERR_BADCHAR = 10040, /* v4 */
- NFSERR_BADNAME = 10041, /* v4 */
- NFSERR_BAD_RANGE = 10042, /* v4 */
- NFSERR_LOCK_NOTSUPP = 10043, /* v4 */
- NFSERR_OP_ILLEGAL = 10044, /* v4 */
- NFSERR_DEADLOCK = 10045, /* v4 */
- NFSERR_FILE_OPEN = 10046, /* v4 */
- NFSERR_ADMIN_REVOKED = 10047, /* v4 */
- NFSERR_CB_PATH_DOWN = 10048, /* v4 */
-};
-
-/* NFSv2 file types - beware, these are not the same in NFSv3 */
-
-enum nfs_ftype {
- NFNON = 0,
- NFREG = 1,
- NFDIR = 2,
- NFBLK = 3,
- NFCHR = 4,
- NFLNK = 5,
- NFSOCK = 6,
- NFBAD = 7,
- NFFIFO = 8
-};
-
-#ifdef __KERNEL__
#include <linux/sunrpc/msg_prot.h>
#include <linux/string.h>
+#include <uapi/linux/nfs.h>
/*
* This is the kernel NFS client file handle representation
@@ -169,5 +48,4 @@
NFS_DATA_SYNC = 1,
NFS_FILE_SYNC = 2
};
-#endif /* __KERNEL__ */
#endif /* _LINUX_NFS_H */
diff --git a/include/linux/nfs3.h b/include/linux/nfs3.h
index 6ccfe3b..a778ad8 100644
--- a/include/linux/nfs3.h
+++ b/include/linux/nfs3.h
@@ -4,100 +4,10 @@
#ifndef _LINUX_NFS3_H
#define _LINUX_NFS3_H
-#define NFS3_PORT 2049
-#define NFS3_MAXDATA 32768
-#define NFS3_MAXPATHLEN PATH_MAX
-#define NFS3_MAXNAMLEN NAME_MAX
-#define NFS3_MAXGROUPS 16
-#define NFS3_FHSIZE 64
-#define NFS3_COOKIESIZE 4
-#define NFS3_CREATEVERFSIZE 8
-#define NFS3_COOKIEVERFSIZE 8
-#define NFS3_WRITEVERFSIZE 8
-#define NFS3_FIFO_DEV (-1)
-#define NFS3MODE_FMT 0170000
-#define NFS3MODE_DIR 0040000
-#define NFS3MODE_CHR 0020000
-#define NFS3MODE_BLK 0060000
-#define NFS3MODE_REG 0100000
-#define NFS3MODE_LNK 0120000
-#define NFS3MODE_SOCK 0140000
-#define NFS3MODE_FIFO 0010000
+#include <uapi/linux/nfs3.h>
-/* Flags for access() call */
-#define NFS3_ACCESS_READ 0x0001
-#define NFS3_ACCESS_LOOKUP 0x0002
-#define NFS3_ACCESS_MODIFY 0x0004
-#define NFS3_ACCESS_EXTEND 0x0008
-#define NFS3_ACCESS_DELETE 0x0010
-#define NFS3_ACCESS_EXECUTE 0x0020
-#define NFS3_ACCESS_FULL 0x003f
-
-/* Flags for create mode */
-enum nfs3_createmode {
- NFS3_CREATE_UNCHECKED = 0,
- NFS3_CREATE_GUARDED = 1,
- NFS3_CREATE_EXCLUSIVE = 2
-};
-
-/* NFSv3 file system properties */
-#define NFS3_FSF_LINK 0x0001
-#define NFS3_FSF_SYMLINK 0x0002
-#define NFS3_FSF_HOMOGENEOUS 0x0008
-#define NFS3_FSF_CANSETTIME 0x0010
-/* Some shorthands. See fs/nfsd/nfs3proc.c */
-#define NFS3_FSF_DEFAULT 0x001B
-#define NFS3_FSF_BILLYBOY 0x0018
-#define NFS3_FSF_READONLY 0x0008
-
-enum nfs3_ftype {
- NF3NON = 0,
- NF3REG = 1,
- NF3DIR = 2,
- NF3BLK = 3,
- NF3CHR = 4,
- NF3LNK = 5,
- NF3SOCK = 6,
- NF3FIFO = 7, /* changed from NFSv2 (was 8) */
- NF3BAD = 8
-};
-
-struct nfs3_fh {
- unsigned short size;
- unsigned char data[NFS3_FHSIZE];
-};
-
-#define NFS3_VERSION 3
-#define NFS3PROC_NULL 0
-#define NFS3PROC_GETATTR 1
-#define NFS3PROC_SETATTR 2
-#define NFS3PROC_LOOKUP 3
-#define NFS3PROC_ACCESS 4
-#define NFS3PROC_READLINK 5
-#define NFS3PROC_READ 6
-#define NFS3PROC_WRITE 7
-#define NFS3PROC_CREATE 8
-#define NFS3PROC_MKDIR 9
-#define NFS3PROC_SYMLINK 10
-#define NFS3PROC_MKNOD 11
-#define NFS3PROC_REMOVE 12
-#define NFS3PROC_RMDIR 13
-#define NFS3PROC_RENAME 14
-#define NFS3PROC_LINK 15
-#define NFS3PROC_READDIR 16
-#define NFS3PROC_READDIRPLUS 17
-#define NFS3PROC_FSSTAT 18
-#define NFS3PROC_FSINFO 19
-#define NFS3PROC_PATHCONF 20
-#define NFS3PROC_COMMIT 21
-
-#define NFS_MNT3_VERSION 3
-
-
-#if defined(__KERNEL__)
/* Number of 32bit words in post_op_attr */
#define NFS3_POST_OP_ATTR_WORDS 22
-#endif /* __KERNEL__ */
#endif /* _LINUX_NFS3_H */
diff --git a/include/linux/nfs4.h b/include/linux/nfs4.h
index af2d2fa..e111fa4 100644
--- a/include/linux/nfs4.h
+++ b/include/linux/nfs4.h
@@ -9,168 +9,11 @@
* Kendrick Smith <kmsmith@umich.edu>
* Andy Adamson <andros@umich.edu>
*/
-
#ifndef _LINUX_NFS4_H
#define _LINUX_NFS4_H
-#include <linux/types.h>
-
-#define NFS4_BITMAP_SIZE 2
-#define NFS4_VERIFIER_SIZE 8
-#define NFS4_STATEID_SEQID_SIZE 4
-#define NFS4_STATEID_OTHER_SIZE 12
-#define NFS4_STATEID_SIZE (NFS4_STATEID_SEQID_SIZE + NFS4_STATEID_OTHER_SIZE)
-#define NFS4_FHSIZE 128
-#define NFS4_MAXPATHLEN PATH_MAX
-#define NFS4_MAXNAMLEN NAME_MAX
-#define NFS4_OPAQUE_LIMIT 1024
-#define NFS4_MAX_SESSIONID_LEN 16
-
-#define NFS4_ACCESS_READ 0x0001
-#define NFS4_ACCESS_LOOKUP 0x0002
-#define NFS4_ACCESS_MODIFY 0x0004
-#define NFS4_ACCESS_EXTEND 0x0008
-#define NFS4_ACCESS_DELETE 0x0010
-#define NFS4_ACCESS_EXECUTE 0x0020
-
-#define NFS4_FH_PERSISTENT 0x0000
-#define NFS4_FH_NOEXPIRE_WITH_OPEN 0x0001
-#define NFS4_FH_VOLATILE_ANY 0x0002
-#define NFS4_FH_VOL_MIGRATION 0x0004
-#define NFS4_FH_VOL_RENAME 0x0008
-
-#define NFS4_OPEN_RESULT_CONFIRM 0x0002
-#define NFS4_OPEN_RESULT_LOCKTYPE_POSIX 0x0004
-
-#define NFS4_SHARE_ACCESS_MASK 0x000F
-#define NFS4_SHARE_ACCESS_READ 0x0001
-#define NFS4_SHARE_ACCESS_WRITE 0x0002
-#define NFS4_SHARE_ACCESS_BOTH 0x0003
-#define NFS4_SHARE_DENY_READ 0x0001
-#define NFS4_SHARE_DENY_WRITE 0x0002
-#define NFS4_SHARE_DENY_BOTH 0x0003
-
-/* nfs41 */
-#define NFS4_SHARE_WANT_MASK 0xFF00
-#define NFS4_SHARE_WANT_NO_PREFERENCE 0x0000
-#define NFS4_SHARE_WANT_READ_DELEG 0x0100
-#define NFS4_SHARE_WANT_WRITE_DELEG 0x0200
-#define NFS4_SHARE_WANT_ANY_DELEG 0x0300
-#define NFS4_SHARE_WANT_NO_DELEG 0x0400
-#define NFS4_SHARE_WANT_CANCEL 0x0500
-
-#define NFS4_SHARE_WHEN_MASK 0xF0000
-#define NFS4_SHARE_SIGNAL_DELEG_WHEN_RESRC_AVAIL 0x10000
-#define NFS4_SHARE_PUSH_DELEG_WHEN_UNCONTENDED 0x20000
-
-#define NFS4_CDFC4_FORE 0x1
-#define NFS4_CDFC4_BACK 0x2
-#define NFS4_CDFC4_BOTH 0x3
-#define NFS4_CDFC4_FORE_OR_BOTH 0x3
-#define NFS4_CDFC4_BACK_OR_BOTH 0x7
-
-#define NFS4_CDFS4_FORE 0x1
-#define NFS4_CDFS4_BACK 0x2
-#define NFS4_CDFS4_BOTH 0x3
-
-#define NFS4_SET_TO_SERVER_TIME 0
-#define NFS4_SET_TO_CLIENT_TIME 1
-
-#define NFS4_ACE_ACCESS_ALLOWED_ACE_TYPE 0
-#define NFS4_ACE_ACCESS_DENIED_ACE_TYPE 1
-#define NFS4_ACE_SYSTEM_AUDIT_ACE_TYPE 2
-#define NFS4_ACE_SYSTEM_ALARM_ACE_TYPE 3
-
-#define ACL4_SUPPORT_ALLOW_ACL 0x01
-#define ACL4_SUPPORT_DENY_ACL 0x02
-#define ACL4_SUPPORT_AUDIT_ACL 0x04
-#define ACL4_SUPPORT_ALARM_ACL 0x08
-
-#define NFS4_ACE_FILE_INHERIT_ACE 0x00000001
-#define NFS4_ACE_DIRECTORY_INHERIT_ACE 0x00000002
-#define NFS4_ACE_NO_PROPAGATE_INHERIT_ACE 0x00000004
-#define NFS4_ACE_INHERIT_ONLY_ACE 0x00000008
-#define NFS4_ACE_SUCCESSFUL_ACCESS_ACE_FLAG 0x00000010
-#define NFS4_ACE_FAILED_ACCESS_ACE_FLAG 0x00000020
-#define NFS4_ACE_IDENTIFIER_GROUP 0x00000040
-
-#define NFS4_ACE_READ_DATA 0x00000001
-#define NFS4_ACE_LIST_DIRECTORY 0x00000001
-#define NFS4_ACE_WRITE_DATA 0x00000002
-#define NFS4_ACE_ADD_FILE 0x00000002
-#define NFS4_ACE_APPEND_DATA 0x00000004
-#define NFS4_ACE_ADD_SUBDIRECTORY 0x00000004
-#define NFS4_ACE_READ_NAMED_ATTRS 0x00000008
-#define NFS4_ACE_WRITE_NAMED_ATTRS 0x00000010
-#define NFS4_ACE_EXECUTE 0x00000020
-#define NFS4_ACE_DELETE_CHILD 0x00000040
-#define NFS4_ACE_READ_ATTRIBUTES 0x00000080
-#define NFS4_ACE_WRITE_ATTRIBUTES 0x00000100
-#define NFS4_ACE_DELETE 0x00010000
-#define NFS4_ACE_READ_ACL 0x00020000
-#define NFS4_ACE_WRITE_ACL 0x00040000
-#define NFS4_ACE_WRITE_OWNER 0x00080000
-#define NFS4_ACE_SYNCHRONIZE 0x00100000
-#define NFS4_ACE_GENERIC_READ 0x00120081
-#define NFS4_ACE_GENERIC_WRITE 0x00160106
-#define NFS4_ACE_GENERIC_EXECUTE 0x001200A0
-#define NFS4_ACE_MASK_ALL 0x001F01FF
-
-#define EXCHGID4_FLAG_SUPP_MOVED_REFER 0x00000001
-#define EXCHGID4_FLAG_SUPP_MOVED_MIGR 0x00000002
-#define EXCHGID4_FLAG_BIND_PRINC_STATEID 0x00000100
-
-#define EXCHGID4_FLAG_USE_NON_PNFS 0x00010000
-#define EXCHGID4_FLAG_USE_PNFS_MDS 0x00020000
-#define EXCHGID4_FLAG_USE_PNFS_DS 0x00040000
-#define EXCHGID4_FLAG_MASK_PNFS 0x00070000
-
-#define EXCHGID4_FLAG_UPD_CONFIRMED_REC_A 0x40000000
-#define EXCHGID4_FLAG_CONFIRMED_R 0x80000000
-/*
- * Since the validity of these bits depends on whether
- * they're set in the argument or response, have separate
- * invalid flag masks for arg (_A) and resp (_R).
- */
-#define EXCHGID4_FLAG_MASK_A 0x40070103
-#define EXCHGID4_FLAG_MASK_R 0x80070103
-
-#define SEQ4_STATUS_CB_PATH_DOWN 0x00000001
-#define SEQ4_STATUS_CB_GSS_CONTEXTS_EXPIRING 0x00000002
-#define SEQ4_STATUS_CB_GSS_CONTEXTS_EXPIRED 0x00000004
-#define SEQ4_STATUS_EXPIRED_ALL_STATE_REVOKED 0x00000008
-#define SEQ4_STATUS_EXPIRED_SOME_STATE_REVOKED 0x00000010
-#define SEQ4_STATUS_ADMIN_STATE_REVOKED 0x00000020
-#define SEQ4_STATUS_RECALLABLE_STATE_REVOKED 0x00000040
-#define SEQ4_STATUS_LEASE_MOVED 0x00000080
-#define SEQ4_STATUS_RESTART_RECLAIM_NEEDED 0x00000100
-#define SEQ4_STATUS_CB_PATH_DOWN_SESSION 0x00000200
-#define SEQ4_STATUS_BACKCHANNEL_FAULT 0x00000400
-
-#define NFS4_SECINFO_STYLE4_CURRENT_FH 0
-#define NFS4_SECINFO_STYLE4_PARENT 1
-
-#define NFS4_MAX_UINT64 (~(u64)0)
-
-/* An NFS4 sessions server must support at least NFS4_MAX_OPS operations.
- * If a compound requires more operations, adjust NFS4_MAX_OPS accordingly.
- */
-#define NFS4_MAX_OPS 8
-
-/* Our NFS4 client back channel server only wants the cb_sequene and the
- * actual operation per compound
- */
-#define NFS4_MAX_BACK_CHANNEL_OPS 2
-
-enum nfs4_acl_whotype {
- NFS4_ACL_WHO_NAMED = 0,
- NFS4_ACL_WHO_OWNER,
- NFS4_ACL_WHO_GROUP,
- NFS4_ACL_WHO_EVERYONE,
-};
-
-#ifdef __KERNEL__
#include <linux/list.h>
+#include <uapi/linux/nfs4.h>
struct nfs4_ace {
uint32_t type;
@@ -673,10 +516,3 @@
};
#endif
-#endif
-
-/*
- * Local variables:
- * c-basic-offset: 8
- * End:
- */
diff --git a/include/linux/nfs_fs.h b/include/linux/nfs_fs.h
index 334a2f5..1cc2568 100644
--- a/include/linux/nfs_fs.h
+++ b/include/linux/nfs_fs.h
@@ -5,38 +5,11 @@
*
* OS-specific nfs filesystem definitions and declarations
*/
-
#ifndef _LINUX_NFS_FS_H
#define _LINUX_NFS_FS_H
-#include <linux/magic.h>
+#include <uapi/linux/nfs_fs.h>
-/* Default timeout values */
-#define NFS_DEF_UDP_TIMEO (11)
-#define NFS_DEF_UDP_RETRANS (3)
-#define NFS_DEF_TCP_TIMEO (600)
-#define NFS_DEF_TCP_RETRANS (2)
-
-#define NFS_MAX_UDP_TIMEOUT (60*HZ)
-#define NFS_MAX_TCP_TIMEOUT (600*HZ)
-
-#define NFS_DEF_ACREGMIN (3)
-#define NFS_DEF_ACREGMAX (60)
-#define NFS_DEF_ACDIRMIN (30)
-#define NFS_DEF_ACDIRMAX (60)
-
-/*
- * When flushing a cluster of dirty pages, there can be different
- * strategies:
- */
-#define FLUSH_SYNC 1 /* file being synced, or contention */
-#define FLUSH_STABLE 4 /* commit to stable storage */
-#define FLUSH_LOWPRI 8 /* low priority background flush */
-#define FLUSH_HIGHPRI 16 /* high priority memory reclaim flush */
-#define FLUSH_COND_STABLE 32 /* conditional stable write - only stable
- * if everything fits in one RPC */
-
-#ifdef __KERNEL__
/*
* Enable dprintk() debugging support for nfs client.
@@ -613,29 +586,6 @@
#define NFS_JUKEBOX_RETRY_TIME (5 * HZ)
-#endif /* __KERNEL__ */
-
-/*
- * NFS debug flags
- */
-#define NFSDBG_VFS 0x0001
-#define NFSDBG_DIRCACHE 0x0002
-#define NFSDBG_LOOKUPCACHE 0x0004
-#define NFSDBG_PAGECACHE 0x0008
-#define NFSDBG_PROC 0x0010
-#define NFSDBG_XDR 0x0020
-#define NFSDBG_FILE 0x0040
-#define NFSDBG_ROOT 0x0080
-#define NFSDBG_CALLBACK 0x0100
-#define NFSDBG_CLIENT 0x0200
-#define NFSDBG_MOUNT 0x0400
-#define NFSDBG_FSCACHE 0x0800
-#define NFSDBG_PNFS 0x1000
-#define NFSDBG_PNFS_LD 0x2000
-#define NFSDBG_STATE 0x4000
-#define NFSDBG_ALL 0xFFFF
-
-#ifdef __KERNEL__
# undef ifdebug
# ifdef NFS_DEBUG
@@ -645,6 +595,4 @@
# define ifdebug(fac) if (0)
# define NFS_IFDEBUG(x)
# endif
-#endif /* __KERNEL */
-
#endif
diff --git a/include/linux/nfs_idmap.h b/include/linux/nfs_idmap.h
index ece91c5..2dcef3a 100644
--- a/include/linux/nfs_idmap.h
+++ b/include/linux/nfs_idmap.h
@@ -33,35 +33,11 @@
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-
#ifndef NFS_IDMAP_H
#define NFS_IDMAP_H
-#include <linux/types.h>
+#include <uapi/linux/nfs_idmap.h>
-/* XXX from bits/utmp.h */
-#define IDMAP_NAMESZ 128
-
-#define IDMAP_TYPE_USER 0
-#define IDMAP_TYPE_GROUP 1
-
-#define IDMAP_CONV_IDTONAME 0
-#define IDMAP_CONV_NAMETOID 1
-
-#define IDMAP_STATUS_INVALIDMSG 0x01
-#define IDMAP_STATUS_AGAIN 0x02
-#define IDMAP_STATUS_LOOKUPFAIL 0x04
-#define IDMAP_STATUS_SUCCESS 0x08
-
-struct idmap_msg {
- __u8 im_type;
- __u8 im_conv;
- char im_name[IDMAP_NAMESZ];
- __u32 im_id;
- __u8 im_status;
-};
-
-#ifdef __KERNEL__
/* Forward declaration to make this header independent of others */
struct nfs_client;
@@ -97,6 +73,4 @@
int nfs_map_gid_to_group(const struct nfs_server *, __u32, char *, size_t);
extern unsigned int nfs_idmap_cache_timeout;
-#endif /* __KERNEL__ */
-
#endif /* NFS_IDMAP_H */
diff --git a/include/linux/nfsacl.h b/include/linux/nfsacl.h
index fabcb1e..5e69e67 100644
--- a/include/linux/nfsacl.h
+++ b/include/linux/nfsacl.h
@@ -6,30 +6,10 @@
#ifndef __LINUX_NFSACL_H
#define __LINUX_NFSACL_H
-#define NFS_ACL_PROGRAM 100227
-
-#define ACLPROC2_GETACL 1
-#define ACLPROC2_SETACL 2
-#define ACLPROC2_GETATTR 3
-#define ACLPROC2_ACCESS 4
-
-#define ACLPROC3_GETACL 1
-#define ACLPROC3_SETACL 2
-
-
-/* Flags for the getacl/setacl mode */
-#define NFS_ACL 0x0001
-#define NFS_ACLCNT 0x0002
-#define NFS_DFACL 0x0004
-#define NFS_DFACLCNT 0x0008
-
-/* Flag for Default ACL entries */
-#define NFS_ACL_DEFAULT 0x1000
-
-#ifdef __KERNEL__
#include <linux/posix_acl.h>
#include <linux/sunrpc/xdr.h>
+#include <uapi/linux/nfsacl.h>
/* Maximum number of ACL entries over NFS */
#define NFS_ACL_MAX_ENTRIES 1024
@@ -58,5 +38,4 @@
nfsacl_decode(struct xdr_buf *buf, unsigned int base, unsigned int *aclcnt,
struct posix_acl **pacl);
-#endif /* __KERNEL__ */
#endif /* __LINUX_NFSACL_H */
diff --git a/include/linux/nubus.h b/include/linux/nubus.h
index e137b3c..a8696bb 100644
--- a/include/linux/nubus.h
+++ b/include/linux/nubus.h
@@ -8,236 +8,12 @@
Some of the constants in here are from the corresponding
NetBSD/OpenBSD header file, by Allen Briggs. We figured out the
rest of them on our own. */
-
#ifndef LINUX_NUBUS_H
#define LINUX_NUBUS_H
-#include <linux/types.h>
-#ifdef __KERNEL__
#include <asm/nubus.h>
-#endif
+#include <uapi/linux/nubus.h>
-enum nubus_category {
- NUBUS_CAT_BOARD = 0x0001,
- NUBUS_CAT_DISPLAY = 0x0003,
- NUBUS_CAT_NETWORK = 0x0004,
- NUBUS_CAT_COMMUNICATIONS = 0x0006,
- NUBUS_CAT_FONT = 0x0009,
- NUBUS_CAT_CPU = 0x000A,
- /* For lack of a better name */
- NUBUS_CAT_DUODOCK = 0x0020
-};
-
-enum nubus_type_network {
- NUBUS_TYPE_ETHERNET = 0x0001,
- NUBUS_TYPE_RS232 = 0x0002
-};
-
-enum nubus_type_display {
- NUBUS_TYPE_VIDEO = 0x0001
-};
-
-enum nubus_type_cpu {
- NUBUS_TYPE_68020 = 0x0003,
- NUBUS_TYPE_68030 = 0x0004,
- NUBUS_TYPE_68040 = 0x0005
-};
-
-/* Known <Cat,Type,SW,HW> tuples: (according to TattleTech and Slots)
- * 68030 motherboards: <10,4,0,24>
- * 68040 motherboards: <10,5,0,24>
- * DuoDock Plus: <32,1,1,2>
- *
- * Toby Frame Buffer card: <3,1,1,1>
- * RBV built-in video (IIci): <3,1,1,24>
- * Valkyrie built-in video (Q630): <3,1,1,46>
- * Macintosh Display Card: <3,1,1,25>
- * Sonora built-in video (P460): <3,1,1,34>
- * Jet framebuffer (DuoDock Plus): <3,1,1,41>
- *
- * SONIC comm-slot/on-board and DuoDock Ethernet: <4,1,1,272>
- * SONIC LC-PDS Ethernet (Dayna, but like Apple 16-bit, sort of): <4,1,1,271>
- * Apple SONIC LC-PDS Ethernet ("Apple Ethernet LC Twisted-Pair Card"): <4,1,0,281>
- * Sonic Systems Ethernet A-Series Card: <4,1,268,256>
- * Asante MacCon NuBus-A: <4,1,260,256> (alpha-1.0,1.1 revision)
- * ROM on the above card: <2,1,0,0>
- * Cabletron ethernet card: <4,1,1,265>
- * Farallon ethernet card: <4,1,268,256> (identical to Sonic Systems card)
- * Kinetics EtherPort IIN: <4,1,259,262>
- * API Engineering EtherRun_LCa PDS enet card: <4,1,282,256>
- *
- * Add your devices to the list! You can obtain the "Slots" utility
- * from Apple's FTP site at:
- * ftp://dev.apple.com/devworld/Tool_Chest/Devices_-_Hardware/NuBus_Slot_Manager/
- *
- * Alternately, TattleTech can be found at any Info-Mac mirror site.
- * or from its distribution site: ftp://ftp.decismkr.com/dms
- */
-
-/* DrSW: Uniquely identifies the software interface to a board. This
- is usually the one you want to look at when writing a driver. It's
- not as useful as you think, though, because as we should know by
- now (duh), "Apple Compatible" can mean a lot of things... */
-
-/* Add known DrSW values here */
-enum nubus_drsw {
- /* NUBUS_CAT_DISPLAY */
- NUBUS_DRSW_APPLE = 0x0001,
- NUBUS_DRSW_APPLE_HIRES = 0x0013, /* MacII HiRes card driver */
-
- /* NUBUS_CAT_NETWORK */
- NUBUS_DRSW_3COM = 0x0000,
- NUBUS_DRSW_CABLETRON = 0x0001,
- NUBUS_DRSW_SONIC_LC = 0x0001,
- NUBUS_DRSW_KINETICS = 0x0103,
- NUBUS_DRSW_ASANTE = 0x0104,
- NUBUS_DRSW_TECHWORKS = 0x0109,
- NUBUS_DRSW_DAYNA = 0x010b,
- NUBUS_DRSW_FARALLON = 0x010c,
- NUBUS_DRSW_APPLE_SN = 0x010f,
- NUBUS_DRSW_DAYNA2 = 0x0115,
- NUBUS_DRSW_FOCUS = 0x011a,
- NUBUS_DRSW_ASANTE_CS = 0x011d, /* use asante SMC9194 driver */
- NUBUS_DRSW_DAYNA_LC = 0x011e,
-
- /* NUBUS_CAT_CPU */
- NUBUS_DRSW_NONE = 0x0000,
-};
-
-/* DrHW: Uniquely identifies the hardware interface to a board (or at
- least, it should... some video cards are known to incorrectly
- identify themselves as Toby cards) */
-
-/* Add known DrHW values here */
-enum nubus_drhw {
- /* NUBUS_CAT_DISPLAY */
- NUBUS_DRHW_APPLE_TFB = 0x0001, /* Toby frame buffer card */
- NUBUS_DRHW_APPLE_WVC = 0x0006, /* Apple Workstation Video Card */
- NUBUS_DRHW_SIGMA_CLRMAX = 0x0007, /* Sigma Design ColorMax */
- NUBUS_DRHW_APPLE_SE30 = 0x0009, /* Apple SE/30 video */
- NUBUS_DRHW_APPLE_HRVC = 0x0013, /* Mac II High-Res Video Card */
- NUBUS_DRHW_APPLE_PVC = 0x0017, /* Mac II Portrait Video Card */
- NUBUS_DRHW_APPLE_RBV1 = 0x0018, /* IIci RBV video */
- NUBUS_DRHW_APPLE_MDC = 0x0019, /* Macintosh Display Card */
- NUBUS_DRHW_APPLE_SONORA = 0x0022, /* Sonora built-in video */
- NUBUS_DRHW_APPLE_24AC = 0x002b, /* Mac 24AC Video Card */
- NUBUS_DRHW_APPLE_VALKYRIE = 0x002e,
- NUBUS_DRHW_APPLE_JET = 0x0029, /* Jet framebuffer (DuoDock) */
- NUBUS_DRHW_SMAC_GFX = 0x0105, /* SuperMac GFX */
- NUBUS_DRHW_RASTER_CB264 = 0x013B, /* RasterOps ColorBoard 264 */
- NUBUS_DRHW_MICRON_XCEED = 0x0146, /* Micron Exceed color */
- NUBUS_DRHW_RDIUS_GSC = 0x0153, /* Radius GS/C */
- NUBUS_DRHW_SMAC_SPEC8 = 0x017B, /* SuperMac Spectrum/8 */
- NUBUS_DRHW_SMAC_SPEC24 = 0x017C, /* SuperMac Spectrum/24 */
- NUBUS_DRHW_RASTER_CB364 = 0x026F, /* RasterOps ColorBoard 364 */
- NUBUS_DRHW_RDIUS_DCGX = 0x027C, /* Radius DirectColor/GX */
- NUBUS_DRHW_RDIUS_PC8 = 0x0291, /* Radius PrecisionColor 8 */
- NUBUS_DRHW_LAPIS_PCS8 = 0x0292, /* Lapis ProColorServer 8 */
- NUBUS_DRHW_RASTER_24XLI = 0x02A0, /* RasterOps 8/24 XLi */
- NUBUS_DRHW_RASTER_PBPGT = 0x02A5, /* RasterOps PaintBoard Prism GT */
- NUBUS_DRHW_EMACH_FSX = 0x02AE, /* E-Machines Futura SX */
- NUBUS_DRHW_RASTER_24XLTV = 0x02B7, /* RasterOps 24XLTV */
- NUBUS_DRHW_SMAC_THUND24 = 0x02CB, /* SuperMac Thunder/24 */
- NUBUS_DRHW_SMAC_THUNDLGHT = 0x03D9, /* SuperMac ThunderLight */
- NUBUS_DRHW_RDIUS_PC24XP = 0x0406, /* Radius PrecisionColor 24Xp */
- NUBUS_DRHW_RDIUS_PC24X = 0x040A, /* Radius PrecisionColor 24X */
- NUBUS_DRHW_RDIUS_PC8XJ = 0x040B, /* Radius PrecisionColor 8XJ */
-
- /* NUBUS_CAT_NETWORK */
- NUBUS_DRHW_INTERLAN = 0x0100,
- NUBUS_DRHW_SMC9194 = 0x0101,
- NUBUS_DRHW_KINETICS = 0x0106,
- NUBUS_DRHW_CABLETRON = 0x0109,
- NUBUS_DRHW_ASANTE_LC = 0x010f,
- NUBUS_DRHW_SONIC = 0x0110,
- NUBUS_DRHW_TECHWORKS = 0x0112,
- NUBUS_DRHW_APPLE_SONIC_NB = 0x0118,
- NUBUS_DRHW_APPLE_SONIC_LC = 0x0119,
- NUBUS_DRHW_FOCUS = 0x011c,
- NUBUS_DRHW_SONNET = 0x011d,
-};
-
-/* Resource IDs: These are the identifiers for the various weird and
- wonderful tidbits of information that may or may not reside in the
- NuBus ROM directory. */
-enum nubus_res_id {
- NUBUS_RESID_TYPE = 0x0001,
- NUBUS_RESID_NAME = 0x0002,
- NUBUS_RESID_ICON = 0x0003,
- NUBUS_RESID_DRVRDIR = 0x0004,
- NUBUS_RESID_LOADREC = 0x0005,
- NUBUS_RESID_BOOTREC = 0x0006,
- NUBUS_RESID_FLAGS = 0x0007,
- NUBUS_RESID_HWDEVID = 0x0008,
- NUBUS_RESID_MINOR_BASEOS = 0x000a,
- NUBUS_RESID_MINOR_LENGTH = 0x000b,
- NUBUS_RESID_MAJOR_BASEOS = 0x000c,
- NUBUS_RESID_MAJOR_LENGTH = 0x000d,
- NUBUS_RESID_CICN = 0x000f,
- NUBUS_RESID_ICL8 = 0x0010,
- NUBUS_RESID_ICL4 = 0x0011,
-};
-
-/* Category-specific resources. */
-enum nubus_board_res_id {
- NUBUS_RESID_BOARDID = 0x0020,
- NUBUS_RESID_PRAMINITDATA = 0x0021,
- NUBUS_RESID_PRIMARYINIT = 0x0022,
- NUBUS_RESID_TIMEOUTCONST = 0x0023,
- NUBUS_RESID_VENDORINFO = 0x0024,
- NUBUS_RESID_BOARDFLAGS = 0x0025,
- NUBUS_RESID_SECONDINIT = 0x0026,
-
- /* Not sure why Apple put these next two in here */
- NUBUS_RESID_VIDNAMES = 0x0041,
- NUBUS_RESID_VIDMODES = 0x007e
-};
-
-/* Fields within the vendor info directory */
-enum nubus_vendor_res_id {
- NUBUS_RESID_VEND_ID = 0x0001,
- NUBUS_RESID_VEND_SERIAL = 0x0002,
- NUBUS_RESID_VEND_REV = 0x0003,
- NUBUS_RESID_VEND_PART = 0x0004,
- NUBUS_RESID_VEND_DATE = 0x0005
-};
-
-enum nubus_net_res_id {
- NUBUS_RESID_MAC_ADDRESS = 0x0080
-};
-
-enum nubus_cpu_res_id {
- NUBUS_RESID_MEMINFO = 0x0081,
- NUBUS_RESID_ROMINFO = 0x0082
-};
-
-enum nubus_display_res_id {
- NUBUS_RESID_GAMMADIR = 0x0040,
- NUBUS_RESID_FIRSTMODE = 0x0080,
- NUBUS_RESID_SECONDMODE = 0x0081,
- NUBUS_RESID_THIRDMODE = 0x0082,
- NUBUS_RESID_FOURTHMODE = 0x0083,
- NUBUS_RESID_FIFTHMODE = 0x0084,
- NUBUS_RESID_SIXTHMODE = 0x0085
-};
-
-struct nubus_dir
-{
- unsigned char *base;
- unsigned char *ptr;
- int done;
- int mask;
-};
-
-struct nubus_dirent
-{
- unsigned char *base;
- unsigned char type;
- __u32 data; /* Actually 24bits used */
- int mask;
-};
-
-#ifdef __KERNEL__
struct nubus_board {
struct nubus_board* next;
struct nubus_dev* first_dev;
@@ -352,12 +128,4 @@
void nubus_get_rsrc_str(void* dest,
const struct nubus_dirent *dirent,
int maxlen);
-#endif /* __KERNEL__ */
-
-/* We'd like to get rid of this eventually. Only daynaport.c uses it now. */
-static inline void *nubus_slot_addr(int slot)
-{
- return (void *)(0xF0000000|(slot<<24));
-}
-
#endif /* LINUX_NUBUS_H */
diff --git a/include/linux/nvram.h b/include/linux/nvram.h
index 9189829..cf0ff55 100644
--- a/include/linux/nvram.h
+++ b/include/linux/nvram.h
@@ -1,18 +1,8 @@
#ifndef _LINUX_NVRAM_H
#define _LINUX_NVRAM_H
-#include <linux/ioctl.h>
+#include <uapi/linux/nvram.h>
-/* /dev/nvram ioctls */
-#define NVRAM_INIT _IO('p', 0x40) /* initialize NVRAM and set checksum */
-#define NVRAM_SETCKS _IO('p', 0x41) /* recalculate checksum */
-
-/* for all current systems, this is where NVRAM starts */
-#define NVRAM_FIRST_BYTE 14
-/* all these functions expect an NVRAM offset, not an absolute */
-#define NVRAM_OFFSET(x) ((x)-NVRAM_FIRST_BYTE)
-
-#ifdef __KERNEL__
/* __foo is foo without grabbing the rtc_lock - get it yourself */
extern unsigned char __nvram_read_byte(int i);
extern unsigned char nvram_read_byte(int i);
@@ -20,6 +10,4 @@
extern void nvram_write_byte(unsigned char c, int i);
extern int __nvram_check_checksum(void);
extern int nvram_check_checksum(void);
-#endif
-
#endif /* _LINUX_NVRAM_H */
diff --git a/include/linux/omapfb.h b/include/linux/omapfb.h
index 85af818..d1f4dcc 100644
--- a/include/linux/omapfb.h
+++ b/include/linux/omapfb.h
@@ -20,205 +20,11 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
-
#ifndef __LINUX_OMAPFB_H__
#define __LINUX_OMAPFB_H__
-#include <linux/fb.h>
-#include <linux/ioctl.h>
-#include <linux/types.h>
+#include <uapi/linux/omapfb.h>
-/* IOCTL commands. */
-
-#define OMAP_IOW(num, dtype) _IOW('O', num, dtype)
-#define OMAP_IOR(num, dtype) _IOR('O', num, dtype)
-#define OMAP_IOWR(num, dtype) _IOWR('O', num, dtype)
-#define OMAP_IO(num) _IO('O', num)
-
-#define OMAPFB_MIRROR OMAP_IOW(31, int)
-#define OMAPFB_SYNC_GFX OMAP_IO(37)
-#define OMAPFB_VSYNC OMAP_IO(38)
-#define OMAPFB_SET_UPDATE_MODE OMAP_IOW(40, int)
-#define OMAPFB_GET_CAPS OMAP_IOR(42, struct omapfb_caps)
-#define OMAPFB_GET_UPDATE_MODE OMAP_IOW(43, int)
-#define OMAPFB_LCD_TEST OMAP_IOW(45, int)
-#define OMAPFB_CTRL_TEST OMAP_IOW(46, int)
-#define OMAPFB_UPDATE_WINDOW_OLD OMAP_IOW(47, struct omapfb_update_window_old)
-#define OMAPFB_SET_COLOR_KEY OMAP_IOW(50, struct omapfb_color_key)
-#define OMAPFB_GET_COLOR_KEY OMAP_IOW(51, struct omapfb_color_key)
-#define OMAPFB_SETUP_PLANE OMAP_IOW(52, struct omapfb_plane_info)
-#define OMAPFB_QUERY_PLANE OMAP_IOW(53, struct omapfb_plane_info)
-#define OMAPFB_UPDATE_WINDOW OMAP_IOW(54, struct omapfb_update_window)
-#define OMAPFB_SETUP_MEM OMAP_IOW(55, struct omapfb_mem_info)
-#define OMAPFB_QUERY_MEM OMAP_IOW(56, struct omapfb_mem_info)
-#define OMAPFB_WAITFORVSYNC OMAP_IO(57)
-#define OMAPFB_MEMORY_READ OMAP_IOR(58, struct omapfb_memory_read)
-#define OMAPFB_GET_OVERLAY_COLORMODE OMAP_IOR(59, struct omapfb_ovl_colormode)
-#define OMAPFB_WAITFORGO OMAP_IO(60)
-#define OMAPFB_GET_VRAM_INFO OMAP_IOR(61, struct omapfb_vram_info)
-#define OMAPFB_SET_TEARSYNC OMAP_IOW(62, struct omapfb_tearsync_info)
-#define OMAPFB_GET_DISPLAY_INFO OMAP_IOR(63, struct omapfb_display_info)
-
-#define OMAPFB_CAPS_GENERIC_MASK 0x00000fff
-#define OMAPFB_CAPS_LCDC_MASK 0x00fff000
-#define OMAPFB_CAPS_PANEL_MASK 0xff000000
-
-#define OMAPFB_CAPS_MANUAL_UPDATE 0x00001000
-#define OMAPFB_CAPS_TEARSYNC 0x00002000
-#define OMAPFB_CAPS_PLANE_RELOCATE_MEM 0x00004000
-#define OMAPFB_CAPS_PLANE_SCALE 0x00008000
-#define OMAPFB_CAPS_WINDOW_PIXEL_DOUBLE 0x00010000
-#define OMAPFB_CAPS_WINDOW_SCALE 0x00020000
-#define OMAPFB_CAPS_WINDOW_OVERLAY 0x00040000
-#define OMAPFB_CAPS_WINDOW_ROTATE 0x00080000
-#define OMAPFB_CAPS_SET_BACKLIGHT 0x01000000
-
-/* Values from DSP must map to lower 16-bits */
-#define OMAPFB_FORMAT_MASK 0x00ff
-#define OMAPFB_FORMAT_FLAG_DOUBLE 0x0100
-#define OMAPFB_FORMAT_FLAG_TEARSYNC 0x0200
-#define OMAPFB_FORMAT_FLAG_FORCE_VSYNC 0x0400
-#define OMAPFB_FORMAT_FLAG_ENABLE_OVERLAY 0x0800
-#define OMAPFB_FORMAT_FLAG_DISABLE_OVERLAY 0x1000
-
-#define OMAPFB_MEMTYPE_SDRAM 0
-#define OMAPFB_MEMTYPE_SRAM 1
-#define OMAPFB_MEMTYPE_MAX 1
-
-#define OMAPFB_MEM_IDX_ENABLED 0x80
-#define OMAPFB_MEM_IDX_MASK 0x7f
-
-enum omapfb_color_format {
- OMAPFB_COLOR_RGB565 = 0,
- OMAPFB_COLOR_YUV422,
- OMAPFB_COLOR_YUV420,
- OMAPFB_COLOR_CLUT_8BPP,
- OMAPFB_COLOR_CLUT_4BPP,
- OMAPFB_COLOR_CLUT_2BPP,
- OMAPFB_COLOR_CLUT_1BPP,
- OMAPFB_COLOR_RGB444,
- OMAPFB_COLOR_YUY422,
-
- OMAPFB_COLOR_ARGB16,
- OMAPFB_COLOR_RGB24U, /* RGB24, 32-bit container */
- OMAPFB_COLOR_RGB24P, /* RGB24, 24-bit container */
- OMAPFB_COLOR_ARGB32,
- OMAPFB_COLOR_RGBA32,
- OMAPFB_COLOR_RGBX32,
-};
-
-struct omapfb_update_window {
- __u32 x, y;
- __u32 width, height;
- __u32 format;
- __u32 out_x, out_y;
- __u32 out_width, out_height;
- __u32 reserved[8];
-};
-
-struct omapfb_update_window_old {
- __u32 x, y;
- __u32 width, height;
- __u32 format;
-};
-
-enum omapfb_plane {
- OMAPFB_PLANE_GFX = 0,
- OMAPFB_PLANE_VID1,
- OMAPFB_PLANE_VID2,
-};
-
-enum omapfb_channel_out {
- OMAPFB_CHANNEL_OUT_LCD = 0,
- OMAPFB_CHANNEL_OUT_DIGIT,
-};
-
-struct omapfb_plane_info {
- __u32 pos_x;
- __u32 pos_y;
- __u8 enabled;
- __u8 channel_out;
- __u8 mirror;
- __u8 mem_idx;
- __u32 out_width;
- __u32 out_height;
- __u32 reserved2[12];
-};
-
-struct omapfb_mem_info {
- __u32 size;
- __u8 type;
- __u8 reserved[3];
-};
-
-struct omapfb_caps {
- __u32 ctrl;
- __u32 plane_color;
- __u32 wnd_color;
-};
-
-enum omapfb_color_key_type {
- OMAPFB_COLOR_KEY_DISABLED = 0,
- OMAPFB_COLOR_KEY_GFX_DST,
- OMAPFB_COLOR_KEY_VID_SRC,
-};
-
-struct omapfb_color_key {
- __u8 channel_out;
- __u32 background;
- __u32 trans_key;
- __u8 key_type;
-};
-
-enum omapfb_update_mode {
- OMAPFB_UPDATE_DISABLED = 0,
- OMAPFB_AUTO_UPDATE,
- OMAPFB_MANUAL_UPDATE
-};
-
-struct omapfb_memory_read {
- __u16 x;
- __u16 y;
- __u16 w;
- __u16 h;
- size_t buffer_size;
- void __user *buffer;
-};
-
-struct omapfb_ovl_colormode {
- __u8 overlay_idx;
- __u8 mode_idx;
- __u32 bits_per_pixel;
- __u32 nonstd;
- struct fb_bitfield red;
- struct fb_bitfield green;
- struct fb_bitfield blue;
- struct fb_bitfield transp;
-};
-
-struct omapfb_vram_info {
- __u32 total;
- __u32 free;
- __u32 largest_free_block;
- __u32 reserved[5];
-};
-
-struct omapfb_tearsync_info {
- __u8 enabled;
- __u8 reserved1[3];
- __u16 line;
- __u16 reserved2;
-};
-
-struct omapfb_display_info {
- __u16 xres;
- __u16 yres;
- __u32 width; /* phys width of the display in micrometers */
- __u32 height; /* phys height of the display in micrometers */
- __u32 reserved[5];
-};
-
-#ifdef __KERNEL__
struct omap_lcd_config {
char panel_name[16];
@@ -233,6 +39,4 @@
void __init omapfb_set_lcd_config(const struct omap_lcd_config *config);
-#endif
-
#endif /* __OMAPFB_H */
diff --git a/include/linux/oom.h b/include/linux/oom.h
index d36a822..fb98268 100644
--- a/include/linux/oom.h
+++ b/include/linux/oom.h
@@ -1,18 +1,11 @@
#ifndef __INCLUDE_LINUX_OOM_H
#define __INCLUDE_LINUX_OOM_H
-/*
- * /proc/<pid>/oom_score_adj set to OOM_SCORE_ADJ_MIN disables oom killing for
- * pid.
- */
-#define OOM_SCORE_ADJ_MIN (-1000)
-#define OOM_SCORE_ADJ_MAX 1000
-
-#ifdef __KERNEL__
#include <linux/sched.h>
#include <linux/types.h>
#include <linux/nodemask.h>
+#include <uapi/linux/oom.h>
struct zonelist;
struct notifier_block;
@@ -82,5 +75,4 @@
extern int sysctl_oom_dump_tasks;
extern int sysctl_oom_kill_allocating_task;
extern int sysctl_panic_on_oom;
-#endif /* __KERNEL__*/
#endif /* _INCLUDE_LINUX_OOM_H */
diff --git a/include/linux/parport.h b/include/linux/parport.h
index 106c2ca..c22f125 100644
--- a/include/linux/parport.h
+++ b/include/linux/parport.h
@@ -3,96 +3,9 @@
* the GNU Free Documentation License, Version 1.1 or any later version
* published by the Free Software Foundation.
*/
-
#ifndef _PARPORT_H_
#define _PARPORT_H_
-/* Start off with user-visible constants */
-
-/* Maximum of 16 ports per machine */
-#define PARPORT_MAX 16
-
-/* Magic numbers */
-#define PARPORT_IRQ_NONE -1
-#define PARPORT_DMA_NONE -1
-#define PARPORT_IRQ_AUTO -2
-#define PARPORT_DMA_AUTO -2
-#define PARPORT_DMA_NOFIFO -3
-#define PARPORT_DISABLE -2
-#define PARPORT_IRQ_PROBEONLY -3
-#define PARPORT_IOHI_AUTO -1
-
-#define PARPORT_CONTROL_STROBE 0x1
-#define PARPORT_CONTROL_AUTOFD 0x2
-#define PARPORT_CONTROL_INIT 0x4
-#define PARPORT_CONTROL_SELECT 0x8
-
-#define PARPORT_STATUS_ERROR 0x8
-#define PARPORT_STATUS_SELECT 0x10
-#define PARPORT_STATUS_PAPEROUT 0x20
-#define PARPORT_STATUS_ACK 0x40
-#define PARPORT_STATUS_BUSY 0x80
-
-/* Type classes for Plug-and-Play probe. */
-typedef enum {
- PARPORT_CLASS_LEGACY = 0, /* Non-IEEE1284 device */
- PARPORT_CLASS_PRINTER,
- PARPORT_CLASS_MODEM,
- PARPORT_CLASS_NET,
- PARPORT_CLASS_HDC, /* Hard disk controller */
- PARPORT_CLASS_PCMCIA,
- PARPORT_CLASS_MEDIA, /* Multimedia device */
- PARPORT_CLASS_FDC, /* Floppy disk controller */
- PARPORT_CLASS_PORTS,
- PARPORT_CLASS_SCANNER,
- PARPORT_CLASS_DIGCAM,
- PARPORT_CLASS_OTHER, /* Anything else */
- PARPORT_CLASS_UNSPEC, /* No CLS field in ID */
- PARPORT_CLASS_SCSIADAPTER
-} parport_device_class;
-
-/* The "modes" entry in parport is a bit field representing the
- capabilities of the hardware. */
-#define PARPORT_MODE_PCSPP (1<<0) /* IBM PC registers available. */
-#define PARPORT_MODE_TRISTATE (1<<1) /* Can tristate. */
-#define PARPORT_MODE_EPP (1<<2) /* Hardware EPP. */
-#define PARPORT_MODE_ECP (1<<3) /* Hardware ECP. */
-#define PARPORT_MODE_COMPAT (1<<4) /* Hardware 'printer protocol'. */
-#define PARPORT_MODE_DMA (1<<5) /* Hardware can DMA. */
-#define PARPORT_MODE_SAFEININT (1<<6) /* SPP registers accessible in IRQ. */
-
-/* IEEE1284 modes:
- Nibble mode, byte mode, ECP, ECPRLE and EPP are their own
- 'extensibility request' values. Others are special.
- 'Real' ECP modes must have the IEEE1284_MODE_ECP bit set. */
-#define IEEE1284_MODE_NIBBLE 0
-#define IEEE1284_MODE_BYTE (1<<0)
-#define IEEE1284_MODE_COMPAT (1<<8)
-#define IEEE1284_MODE_BECP (1<<9) /* Bounded ECP mode */
-#define IEEE1284_MODE_ECP (1<<4)
-#define IEEE1284_MODE_ECPRLE (IEEE1284_MODE_ECP | (1<<5))
-#define IEEE1284_MODE_ECPSWE (1<<10) /* Software-emulated */
-#define IEEE1284_MODE_EPP (1<<6)
-#define IEEE1284_MODE_EPPSL (1<<11) /* EPP 1.7 */
-#define IEEE1284_MODE_EPPSWE (1<<12) /* Software-emulated */
-#define IEEE1284_DEVICEID (1<<2) /* This is a flag */
-#define IEEE1284_EXT_LINK (1<<14) /* This flag causes the
- * extensibility link to
- * be requested, using
- * bits 0-6. */
-
-/* For the benefit of parport_read/write, you can use these with
- * parport_negotiate to use address operations. They have no effect
- * other than to make parport_read/write use address transfers. */
-#define IEEE1284_ADDR (1<<13) /* This is a flag */
-#define IEEE1284_DATA 0 /* So is this */
-
-/* Flags for block transfer operations. */
-#define PARPORT_EPP_FAST (1<<0) /* Unreliable counts. */
-#define PARPORT_W91284PIC (1<<1) /* have a Warp9 w91284pic in the device */
-
-/* The rest is for the kernel only */
-#ifdef __KERNEL__
#include <linux/jiffies.h>
#include <linux/proc_fs.h>
@@ -101,6 +14,7 @@
#include <linux/irqreturn.h>
#include <linux/semaphore.h>
#include <asm/ptrace.h>
+#include <uapi/linux/parport.h>
/* Define this later. */
struct parport;
@@ -564,5 +478,4 @@
extern unsigned long parport_default_timeslice;
extern int parport_default_spintime;
-#endif /* __KERNEL__ */
#endif /* _PARPORT_H_ */
diff --git a/include/linux/patchkey.h b/include/linux/patchkey.h
index aefda0e..97a919f 100644
--- a/include/linux/patchkey.h
+++ b/include/linux/patchkey.h
@@ -9,22 +9,12 @@
* Do not include this file directly. Please use <sys/soundcard.h> instead.
* For kernel code, use <linux/soundcard.h>
*/
-
-#ifndef _LINUX_PATCHKEY_H_INDIRECT
-#error "patchkey.h included directly"
-#endif
-
#ifndef _LINUX_PATCHKEY_H
#define _LINUX_PATCHKEY_H
-/* Endian macros. */
-#ifdef __KERNEL__
# include <asm/byteorder.h>
-#else
-# include <endian.h>
-#endif
+#include <uapi/linux/patchkey.h>
-#if defined(__KERNEL__)
# if defined(__BIG_ENDIAN)
# define _PATCHKEY(id) (0xfd00|id)
# elif defined(__LITTLE_ENDIAN)
@@ -32,16 +22,4 @@
# else
# error "could not determine byte order"
# endif
-#else
-#if defined(__BYTE_ORDER)
-# if __BYTE_ORDER == __BIG_ENDIAN
-# define _PATCHKEY(id) (0xfd00|id)
-# elif __BYTE_ORDER == __LITTLE_ENDIAN
-# define _PATCHKEY(id) ((id<<8)|0x00fd)
-# else
-# error "could not determine byte order"
-# endif
-#endif
-#endif
-
#endif /* _LINUX_PATCHKEY_H */
diff --git a/include/linux/pci.h b/include/linux/pci.h
index be1de01..ee21795 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -13,32 +13,9 @@
* PCI to PCI Bridge Specification
* PCI System Design Guide
*/
-
#ifndef LINUX_PCI_H
#define LINUX_PCI_H
-#include <linux/pci_regs.h> /* The pci register defines */
-
-/*
- * The PCI interface treats multi-function devices as independent
- * devices. The slot/function address of each device is encoded
- * in a single byte as follows:
- *
- * 7:3 = slot
- * 2:0 = function
- */
-#define PCI_DEVFN(slot, func) ((((slot) & 0x1f) << 3) | ((func) & 0x07))
-#define PCI_SLOT(devfn) (((devfn) >> 3) & 0x1f)
-#define PCI_FUNC(devfn) ((devfn) & 0x07)
-
-/* Ioctls for /proc/bus/pci/X/Y nodes. */
-#define PCIIOC_BASE ('P' << 24 | 'C' << 16 | 'I' << 8)
-#define PCIIOC_CONTROLLER (PCIIOC_BASE | 0x00) /* Get controller for PCI device. */
-#define PCIIOC_MMAP_IS_IO (PCIIOC_BASE | 0x01) /* Set mmap state to I/O space. */
-#define PCIIOC_MMAP_IS_MEM (PCIIOC_BASE | 0x02) /* Set mmap state to MEM space. */
-#define PCIIOC_WRITE_COMBINE (PCIIOC_BASE | 0x03) /* Enable/disable write-combining. */
-
-#ifdef __KERNEL__
#include <linux/mod_devicetable.h>
@@ -53,6 +30,7 @@
#include <linux/device.h>
#include <linux/io.h>
#include <linux/irqreturn.h>
+#include <uapi/linux/pci.h>
/* Include the ID list */
#include <linux/pci_ids.h>
@@ -1831,5 +1809,4 @@
*/
struct pci_dev *pci_find_upstream_pcie_bridge(struct pci_dev *pdev);
-#endif /* __KERNEL__ */
#endif /* LINUX_PCI_H */
diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h
index b4166cd..2e90235 100644
--- a/include/linux/perf_event.h
+++ b/include/linux/perf_event.h
@@ -14,605 +14,8 @@
#ifndef _LINUX_PERF_EVENT_H
#define _LINUX_PERF_EVENT_H
-#include <linux/types.h>
-#include <linux/ioctl.h>
-#include <asm/byteorder.h>
-
-/*
- * User-space ABI bits:
- */
-
-/*
- * attr.type
- */
-enum perf_type_id {
- PERF_TYPE_HARDWARE = 0,
- PERF_TYPE_SOFTWARE = 1,
- PERF_TYPE_TRACEPOINT = 2,
- PERF_TYPE_HW_CACHE = 3,
- PERF_TYPE_RAW = 4,
- PERF_TYPE_BREAKPOINT = 5,
-
- PERF_TYPE_MAX, /* non-ABI */
-};
-
-/*
- * Generalized performance event event_id types, used by the
- * attr.event_id parameter of the sys_perf_event_open()
- * syscall:
- */
-enum perf_hw_id {
- /*
- * Common hardware events, generalized by the kernel:
- */
- PERF_COUNT_HW_CPU_CYCLES = 0,
- PERF_COUNT_HW_INSTRUCTIONS = 1,
- PERF_COUNT_HW_CACHE_REFERENCES = 2,
- PERF_COUNT_HW_CACHE_MISSES = 3,
- PERF_COUNT_HW_BRANCH_INSTRUCTIONS = 4,
- PERF_COUNT_HW_BRANCH_MISSES = 5,
- PERF_COUNT_HW_BUS_CYCLES = 6,
- PERF_COUNT_HW_STALLED_CYCLES_FRONTEND = 7,
- PERF_COUNT_HW_STALLED_CYCLES_BACKEND = 8,
- PERF_COUNT_HW_REF_CPU_CYCLES = 9,
-
- PERF_COUNT_HW_MAX, /* non-ABI */
-};
-
-/*
- * Generalized hardware cache events:
- *
- * { L1-D, L1-I, LLC, ITLB, DTLB, BPU, NODE } x
- * { read, write, prefetch } x
- * { accesses, misses }
- */
-enum perf_hw_cache_id {
- PERF_COUNT_HW_CACHE_L1D = 0,
- PERF_COUNT_HW_CACHE_L1I = 1,
- PERF_COUNT_HW_CACHE_LL = 2,
- PERF_COUNT_HW_CACHE_DTLB = 3,
- PERF_COUNT_HW_CACHE_ITLB = 4,
- PERF_COUNT_HW_CACHE_BPU = 5,
- PERF_COUNT_HW_CACHE_NODE = 6,
-
- PERF_COUNT_HW_CACHE_MAX, /* non-ABI */
-};
-
-enum perf_hw_cache_op_id {
- PERF_COUNT_HW_CACHE_OP_READ = 0,
- PERF_COUNT_HW_CACHE_OP_WRITE = 1,
- PERF_COUNT_HW_CACHE_OP_PREFETCH = 2,
-
- PERF_COUNT_HW_CACHE_OP_MAX, /* non-ABI */
-};
-
-enum perf_hw_cache_op_result_id {
- PERF_COUNT_HW_CACHE_RESULT_ACCESS = 0,
- PERF_COUNT_HW_CACHE_RESULT_MISS = 1,
-
- PERF_COUNT_HW_CACHE_RESULT_MAX, /* non-ABI */
-};
-
-/*
- * Special "software" events provided by the kernel, even if the hardware
- * does not support performance events. These events measure various
- * physical and sw events of the kernel (and allow the profiling of them as
- * well):
- */
-enum perf_sw_ids {
- PERF_COUNT_SW_CPU_CLOCK = 0,
- PERF_COUNT_SW_TASK_CLOCK = 1,
- PERF_COUNT_SW_PAGE_FAULTS = 2,
- PERF_COUNT_SW_CONTEXT_SWITCHES = 3,
- PERF_COUNT_SW_CPU_MIGRATIONS = 4,
- PERF_COUNT_SW_PAGE_FAULTS_MIN = 5,
- PERF_COUNT_SW_PAGE_FAULTS_MAJ = 6,
- PERF_COUNT_SW_ALIGNMENT_FAULTS = 7,
- PERF_COUNT_SW_EMULATION_FAULTS = 8,
-
- PERF_COUNT_SW_MAX, /* non-ABI */
-};
-
-/*
- * Bits that can be set in attr.sample_type to request information
- * in the overflow packets.
- */
-enum perf_event_sample_format {
- PERF_SAMPLE_IP = 1U << 0,
- PERF_SAMPLE_TID = 1U << 1,
- PERF_SAMPLE_TIME = 1U << 2,
- PERF_SAMPLE_ADDR = 1U << 3,
- PERF_SAMPLE_READ = 1U << 4,
- PERF_SAMPLE_CALLCHAIN = 1U << 5,
- PERF_SAMPLE_ID = 1U << 6,
- PERF_SAMPLE_CPU = 1U << 7,
- PERF_SAMPLE_PERIOD = 1U << 8,
- PERF_SAMPLE_STREAM_ID = 1U << 9,
- PERF_SAMPLE_RAW = 1U << 10,
- PERF_SAMPLE_BRANCH_STACK = 1U << 11,
- PERF_SAMPLE_REGS_USER = 1U << 12,
- PERF_SAMPLE_STACK_USER = 1U << 13,
-
- PERF_SAMPLE_MAX = 1U << 14, /* non-ABI */
-};
-
-/*
- * values to program into branch_sample_type when PERF_SAMPLE_BRANCH is set
- *
- * If the user does not pass priv level information via branch_sample_type,
- * the kernel uses the event's priv level. Branch and event priv levels do
- * not have to match. Branch priv level is checked for permissions.
- *
- * The branch types can be combined, however BRANCH_ANY covers all types
- * of branches and therefore it supersedes all the other types.
- */
-enum perf_branch_sample_type {
- PERF_SAMPLE_BRANCH_USER = 1U << 0, /* user branches */
- PERF_SAMPLE_BRANCH_KERNEL = 1U << 1, /* kernel branches */
- PERF_SAMPLE_BRANCH_HV = 1U << 2, /* hypervisor branches */
-
- PERF_SAMPLE_BRANCH_ANY = 1U << 3, /* any branch types */
- PERF_SAMPLE_BRANCH_ANY_CALL = 1U << 4, /* any call branch */
- PERF_SAMPLE_BRANCH_ANY_RETURN = 1U << 5, /* any return branch */
- PERF_SAMPLE_BRANCH_IND_CALL = 1U << 6, /* indirect calls */
-
- PERF_SAMPLE_BRANCH_MAX = 1U << 7, /* non-ABI */
-};
-
-#define PERF_SAMPLE_BRANCH_PLM_ALL \
- (PERF_SAMPLE_BRANCH_USER|\
- PERF_SAMPLE_BRANCH_KERNEL|\
- PERF_SAMPLE_BRANCH_HV)
-
-/*
- * Values to determine ABI of the registers dump.
- */
-enum perf_sample_regs_abi {
- PERF_SAMPLE_REGS_ABI_NONE = 0,
- PERF_SAMPLE_REGS_ABI_32 = 1,
- PERF_SAMPLE_REGS_ABI_64 = 2,
-};
-
-/*
- * The format of the data returned by read() on a perf event fd,
- * as specified by attr.read_format:
- *
- * struct read_format {
- * { u64 value;
- * { u64 time_enabled; } && PERF_FORMAT_TOTAL_TIME_ENABLED
- * { u64 time_running; } && PERF_FORMAT_TOTAL_TIME_RUNNING
- * { u64 id; } && PERF_FORMAT_ID
- * } && !PERF_FORMAT_GROUP
- *
- * { u64 nr;
- * { u64 time_enabled; } && PERF_FORMAT_TOTAL_TIME_ENABLED
- * { u64 time_running; } && PERF_FORMAT_TOTAL_TIME_RUNNING
- * { u64 value;
- * { u64 id; } && PERF_FORMAT_ID
- * } cntr[nr];
- * } && PERF_FORMAT_GROUP
- * };
- */
-enum perf_event_read_format {
- PERF_FORMAT_TOTAL_TIME_ENABLED = 1U << 0,
- PERF_FORMAT_TOTAL_TIME_RUNNING = 1U << 1,
- PERF_FORMAT_ID = 1U << 2,
- PERF_FORMAT_GROUP = 1U << 3,
-
- PERF_FORMAT_MAX = 1U << 4, /* non-ABI */
-};
-
-#define PERF_ATTR_SIZE_VER0 64 /* sizeof first published struct */
-#define PERF_ATTR_SIZE_VER1 72 /* add: config2 */
-#define PERF_ATTR_SIZE_VER2 80 /* add: branch_sample_type */
-#define PERF_ATTR_SIZE_VER3 96 /* add: sample_regs_user */
- /* add: sample_stack_user */
-
-/*
- * Hardware event_id to monitor via a performance monitoring event:
- */
-struct perf_event_attr {
-
- /*
- * Major type: hardware/software/tracepoint/etc.
- */
- __u32 type;
-
- /*
- * Size of the attr structure, for fwd/bwd compat.
- */
- __u32 size;
-
- /*
- * Type specific configuration information.
- */
- __u64 config;
-
- union {
- __u64 sample_period;
- __u64 sample_freq;
- };
-
- __u64 sample_type;
- __u64 read_format;
-
- __u64 disabled : 1, /* off by default */
- inherit : 1, /* children inherit it */
- pinned : 1, /* must always be on PMU */
- exclusive : 1, /* only group on PMU */
- exclude_user : 1, /* don't count user */
- exclude_kernel : 1, /* ditto kernel */
- exclude_hv : 1, /* ditto hypervisor */
- exclude_idle : 1, /* don't count when idle */
- mmap : 1, /* include mmap data */
- comm : 1, /* include comm data */
- freq : 1, /* use freq, not period */
- inherit_stat : 1, /* per task counts */
- enable_on_exec : 1, /* next exec enables */
- task : 1, /* trace fork/exit */
- watermark : 1, /* wakeup_watermark */
- /*
- * precise_ip:
- *
- * 0 - SAMPLE_IP can have arbitrary skid
- * 1 - SAMPLE_IP must have constant skid
- * 2 - SAMPLE_IP requested to have 0 skid
- * 3 - SAMPLE_IP must have 0 skid
- *
- * See also PERF_RECORD_MISC_EXACT_IP
- */
- precise_ip : 2, /* skid constraint */
- mmap_data : 1, /* non-exec mmap data */
- sample_id_all : 1, /* sample_type all events */
-
- exclude_host : 1, /* don't count in host */
- exclude_guest : 1, /* don't count in guest */
-
- exclude_callchain_kernel : 1, /* exclude kernel callchains */
- exclude_callchain_user : 1, /* exclude user callchains */
-
- __reserved_1 : 41;
-
- union {
- __u32 wakeup_events; /* wakeup every n events */
- __u32 wakeup_watermark; /* bytes before wakeup */
- };
-
- __u32 bp_type;
- union {
- __u64 bp_addr;
- __u64 config1; /* extension of config */
- };
- union {
- __u64 bp_len;
- __u64 config2; /* extension of config1 */
- };
- __u64 branch_sample_type; /* enum perf_branch_sample_type */
-
- /*
- * Defines set of user regs to dump on samples.
- * See asm/perf_regs.h for details.
- */
- __u64 sample_regs_user;
-
- /*
- * Defines size of the user stack to dump on samples.
- */
- __u32 sample_stack_user;
-
- /* Align to u64. */
- __u32 __reserved_2;
-};
-
-#define perf_flags(attr) (*(&(attr)->read_format + 1))
-
-/*
- * Ioctls that can be done on a perf event fd:
- */
-#define PERF_EVENT_IOC_ENABLE _IO ('$', 0)
-#define PERF_EVENT_IOC_DISABLE _IO ('$', 1)
-#define PERF_EVENT_IOC_REFRESH _IO ('$', 2)
-#define PERF_EVENT_IOC_RESET _IO ('$', 3)
-#define PERF_EVENT_IOC_PERIOD _IOW('$', 4, __u64)
-#define PERF_EVENT_IOC_SET_OUTPUT _IO ('$', 5)
-#define PERF_EVENT_IOC_SET_FILTER _IOW('$', 6, char *)
-
-enum perf_event_ioc_flags {
- PERF_IOC_FLAG_GROUP = 1U << 0,
-};
-
-/*
- * Structure of the page that can be mapped via mmap
- */
-struct perf_event_mmap_page {
- __u32 version; /* version number of this structure */
- __u32 compat_version; /* lowest version this is compat with */
-
- /*
- * Bits needed to read the hw events in user-space.
- *
- * u32 seq, time_mult, time_shift, idx, width;
- * u64 count, enabled, running;
- * u64 cyc, time_offset;
- * s64 pmc = 0;
- *
- * do {
- * seq = pc->lock;
- * barrier()
- *
- * enabled = pc->time_enabled;
- * running = pc->time_running;
- *
- * if (pc->cap_usr_time && enabled != running) {
- * cyc = rdtsc();
- * time_offset = pc->time_offset;
- * time_mult = pc->time_mult;
- * time_shift = pc->time_shift;
- * }
- *
- * idx = pc->index;
- * count = pc->offset;
- * if (pc->cap_usr_rdpmc && idx) {
- * width = pc->pmc_width;
- * pmc = rdpmc(idx - 1);
- * }
- *
- * barrier();
- * } while (pc->lock != seq);
- *
- * NOTE: for obvious reason this only works on self-monitoring
- * processes.
- */
- __u32 lock; /* seqlock for synchronization */
- __u32 index; /* hardware event identifier */
- __s64 offset; /* add to hardware event value */
- __u64 time_enabled; /* time event active */
- __u64 time_running; /* time event on cpu */
- union {
- __u64 capabilities;
- __u64 cap_usr_time : 1,
- cap_usr_rdpmc : 1,
- cap_____res : 62;
- };
-
- /*
- * If cap_usr_rdpmc this field provides the bit-width of the value
- * read using the rdpmc() or equivalent instruction. This can be used
- * to sign extend the result like:
- *
- * pmc <<= 64 - width;
- * pmc >>= 64 - width; // signed shift right
- * count += pmc;
- */
- __u16 pmc_width;
-
- /*
- * If cap_usr_time the below fields can be used to compute the time
- * delta since time_enabled (in ns) using rdtsc or similar.
- *
- * u64 quot, rem;
- * u64 delta;
- *
- * quot = (cyc >> time_shift);
- * rem = cyc & ((1 << time_shift) - 1);
- * delta = time_offset + quot * time_mult +
- * ((rem * time_mult) >> time_shift);
- *
- * Where time_offset,time_mult,time_shift and cyc are read in the
- * seqcount loop described above. This delta can then be added to
- * enabled and possible running (if idx), improving the scaling:
- *
- * enabled += delta;
- * if (idx)
- * running += delta;
- *
- * quot = count / running;
- * rem = count % running;
- * count = quot * enabled + (rem * enabled) / running;
- */
- __u16 time_shift;
- __u32 time_mult;
- __u64 time_offset;
-
- /*
- * Hole for extension of the self monitor capabilities
- */
-
- __u64 __reserved[120]; /* align to 1k */
-
- /*
- * Control data for the mmap() data buffer.
- *
- * User-space reading the @data_head value should issue an rmb(), on
- * SMP capable platforms, after reading this value -- see
- * perf_event_wakeup().
- *
- * When the mapping is PROT_WRITE the @data_tail value should be
- * written by userspace to reflect the last read data. In this case
- * the kernel will not over-write unread data.
- */
- __u64 data_head; /* head in the data section */
- __u64 data_tail; /* user-space written tail */
-};
-
-#define PERF_RECORD_MISC_CPUMODE_MASK (7 << 0)
-#define PERF_RECORD_MISC_CPUMODE_UNKNOWN (0 << 0)
-#define PERF_RECORD_MISC_KERNEL (1 << 0)
-#define PERF_RECORD_MISC_USER (2 << 0)
-#define PERF_RECORD_MISC_HYPERVISOR (3 << 0)
-#define PERF_RECORD_MISC_GUEST_KERNEL (4 << 0)
-#define PERF_RECORD_MISC_GUEST_USER (5 << 0)
-
-/*
- * Indicates that the content of PERF_SAMPLE_IP points to
- * the actual instruction that triggered the event. See also
- * perf_event_attr::precise_ip.
- */
-#define PERF_RECORD_MISC_EXACT_IP (1 << 14)
-/*
- * Reserve the last bit to indicate some extended misc field
- */
-#define PERF_RECORD_MISC_EXT_RESERVED (1 << 15)
-
-struct perf_event_header {
- __u32 type;
- __u16 misc;
- __u16 size;
-};
-
-enum perf_event_type {
-
- /*
- * If perf_event_attr.sample_id_all is set then all event types will
- * have the sample_type selected fields related to where/when
- * (identity) an event took place (TID, TIME, ID, CPU, STREAM_ID)
- * described in PERF_RECORD_SAMPLE below, it will be stashed just after
- * the perf_event_header and the fields already present for the existing
- * fields, i.e. at the end of the payload. That way a newer perf.data
- * file will be supported by older perf tools, with these new optional
- * fields being ignored.
- *
- * The MMAP events record the PROT_EXEC mappings so that we can
- * correlate userspace IPs to code. They have the following structure:
- *
- * struct {
- * struct perf_event_header header;
- *
- * u32 pid, tid;
- * u64 addr;
- * u64 len;
- * u64 pgoff;
- * char filename[];
- * };
- */
- PERF_RECORD_MMAP = 1,
-
- /*
- * struct {
- * struct perf_event_header header;
- * u64 id;
- * u64 lost;
- * };
- */
- PERF_RECORD_LOST = 2,
-
- /*
- * struct {
- * struct perf_event_header header;
- *
- * u32 pid, tid;
- * char comm[];
- * };
- */
- PERF_RECORD_COMM = 3,
-
- /*
- * struct {
- * struct perf_event_header header;
- * u32 pid, ppid;
- * u32 tid, ptid;
- * u64 time;
- * };
- */
- PERF_RECORD_EXIT = 4,
-
- /*
- * struct {
- * struct perf_event_header header;
- * u64 time;
- * u64 id;
- * u64 stream_id;
- * };
- */
- PERF_RECORD_THROTTLE = 5,
- PERF_RECORD_UNTHROTTLE = 6,
-
- /*
- * struct {
- * struct perf_event_header header;
- * u32 pid, ppid;
- * u32 tid, ptid;
- * u64 time;
- * };
- */
- PERF_RECORD_FORK = 7,
-
- /*
- * struct {
- * struct perf_event_header header;
- * u32 pid, tid;
- *
- * struct read_format values;
- * };
- */
- PERF_RECORD_READ = 8,
-
- /*
- * struct {
- * struct perf_event_header header;
- *
- * { u64 ip; } && PERF_SAMPLE_IP
- * { u32 pid, tid; } && PERF_SAMPLE_TID
- * { u64 time; } && PERF_SAMPLE_TIME
- * { u64 addr; } && PERF_SAMPLE_ADDR
- * { u64 id; } && PERF_SAMPLE_ID
- * { u64 stream_id;} && PERF_SAMPLE_STREAM_ID
- * { u32 cpu, res; } && PERF_SAMPLE_CPU
- * { u64 period; } && PERF_SAMPLE_PERIOD
- *
- * { struct read_format values; } && PERF_SAMPLE_READ
- *
- * { u64 nr,
- * u64 ips[nr]; } && PERF_SAMPLE_CALLCHAIN
- *
- * #
- * # The RAW record below is opaque data wrt the ABI
- * #
- * # That is, the ABI doesn't make any promises wrt to
- * # the stability of its content, it may vary depending
- * # on event, hardware, kernel version and phase of
- * # the moon.
- * #
- * # In other words, PERF_SAMPLE_RAW contents are not an ABI.
- * #
- *
- * { u32 size;
- * char data[size];}&& PERF_SAMPLE_RAW
- *
- * { u64 from, to, flags } lbr[nr];} && PERF_SAMPLE_BRANCH_STACK
- *
- * { u64 abi; # enum perf_sample_regs_abi
- * u64 regs[weight(mask)]; } && PERF_SAMPLE_REGS_USER
- *
- * { u64 size;
- * char data[size];
- * u64 dyn_size; } && PERF_SAMPLE_STACK_USER
- * };
- */
- PERF_RECORD_SAMPLE = 9,
-
- PERF_RECORD_MAX, /* non-ABI */
-};
-
-#define PERF_MAX_STACK_DEPTH 127
-
-enum perf_callchain_context {
- PERF_CONTEXT_HV = (__u64)-32,
- PERF_CONTEXT_KERNEL = (__u64)-128,
- PERF_CONTEXT_USER = (__u64)-512,
-
- PERF_CONTEXT_GUEST = (__u64)-2048,
- PERF_CONTEXT_GUEST_KERNEL = (__u64)-2176,
- PERF_CONTEXT_GUEST_USER = (__u64)-2560,
-
- PERF_CONTEXT_MAX = (__u64)-4095,
-};
-
-#define PERF_FLAG_FD_NO_GROUP (1U << 0)
-#define PERF_FLAG_FD_OUTPUT (1U << 1)
-#define PERF_FLAG_PID_CGROUP (1U << 2) /* pid=cgroup id, per-cpu mode only */
+#include <uapi/linux/perf_event.h>
-#ifdef __KERNEL__
/*
* Kernel-internal data types and definitions:
*/
@@ -1422,5 +825,4 @@
\
static struct device_attribute format_attr_##_name = __ATTR_RO(_name)
-#endif /* __KERNEL__ */
#endif /* _LINUX_PERF_EVENT_H */
diff --git a/include/linux/personality.h b/include/linux/personality.h
index 8fc7dd1a..646c0a7 100644
--- a/include/linux/personality.h
+++ b/include/linux/personality.h
@@ -1,7 +1,8 @@
#ifndef _LINUX_PERSONALITY_H
#define _LINUX_PERSONALITY_H
-#ifdef __KERNEL__
+#include <uapi/linux/personality.h>
+
/*
* Handling of different ABIs (personalities).
@@ -14,72 +15,6 @@
extern int unregister_exec_domain(struct exec_domain *);
extern int __set_personality(unsigned int);
-#endif /* __KERNEL__ */
-
-/*
- * Flags for bug emulation.
- *
- * These occupy the top three bytes.
- */
-enum {
- UNAME26 = 0x0020000,
- ADDR_NO_RANDOMIZE = 0x0040000, /* disable randomization of VA space */
- FDPIC_FUNCPTRS = 0x0080000, /* userspace function ptrs point to descriptors
- * (signal handling)
- */
- MMAP_PAGE_ZERO = 0x0100000,
- ADDR_COMPAT_LAYOUT = 0x0200000,
- READ_IMPLIES_EXEC = 0x0400000,
- ADDR_LIMIT_32BIT = 0x0800000,
- SHORT_INODE = 0x1000000,
- WHOLE_SECONDS = 0x2000000,
- STICKY_TIMEOUTS = 0x4000000,
- ADDR_LIMIT_3GB = 0x8000000,
-};
-
-/*
- * Security-relevant compatibility flags that must be
- * cleared upon setuid or setgid exec:
- */
-#define PER_CLEAR_ON_SETID (READ_IMPLIES_EXEC | \
- ADDR_NO_RANDOMIZE | \
- ADDR_COMPAT_LAYOUT | \
- MMAP_PAGE_ZERO)
-
-/*
- * Personality types.
- *
- * These go in the low byte. Avoid using the top bit, it will
- * conflict with error returns.
- */
-enum {
- PER_LINUX = 0x0000,
- PER_LINUX_32BIT = 0x0000 | ADDR_LIMIT_32BIT,
- PER_LINUX_FDPIC = 0x0000 | FDPIC_FUNCPTRS,
- PER_SVR4 = 0x0001 | STICKY_TIMEOUTS | MMAP_PAGE_ZERO,
- PER_SVR3 = 0x0002 | STICKY_TIMEOUTS | SHORT_INODE,
- PER_SCOSVR3 = 0x0003 | STICKY_TIMEOUTS |
- WHOLE_SECONDS | SHORT_INODE,
- PER_OSR5 = 0x0003 | STICKY_TIMEOUTS | WHOLE_SECONDS,
- PER_WYSEV386 = 0x0004 | STICKY_TIMEOUTS | SHORT_INODE,
- PER_ISCR4 = 0x0005 | STICKY_TIMEOUTS,
- PER_BSD = 0x0006,
- PER_SUNOS = 0x0006 | STICKY_TIMEOUTS,
- PER_XENIX = 0x0007 | STICKY_TIMEOUTS | SHORT_INODE,
- PER_LINUX32 = 0x0008,
- PER_LINUX32_3GB = 0x0008 | ADDR_LIMIT_3GB,
- PER_IRIX32 = 0x0009 | STICKY_TIMEOUTS,/* IRIX5 32-bit */
- PER_IRIXN32 = 0x000a | STICKY_TIMEOUTS,/* IRIX6 new 32-bit */
- PER_IRIX64 = 0x000b | STICKY_TIMEOUTS,/* IRIX6 64-bit */
- PER_RISCOS = 0x000c,
- PER_SOLARIS = 0x000d | STICKY_TIMEOUTS,
- PER_UW7 = 0x000e | STICKY_TIMEOUTS | MMAP_PAGE_ZERO,
- PER_OSF4 = 0x000f, /* OSF/1 v4 */
- PER_HPUX = 0x0010,
- PER_MASK = 0x00ff,
-};
-
-#ifdef __KERNEL__
/*
* Description of an execution domain.
@@ -116,6 +51,4 @@
#define set_personality(pers) \
((current->personality == (pers)) ? 0 : __set_personality(pers))
-#endif /* __KERNEL__ */
-
#endif /* _LINUX_PERSONALITY_H */
diff --git a/include/linux/phonet.h b/include/linux/phonet.h
index f48bfc8..f691b04 100644
--- a/include/linux/phonet.h
+++ b/include/linux/phonet.h
@@ -19,169 +19,11 @@
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
* 02110-1301 USA
*/
-
#ifndef LINUX_PHONET_H
#define LINUX_PHONET_H
-#include <linux/types.h>
-#include <linux/socket.h>
+#include <uapi/linux/phonet.h>
-/* Automatic protocol selection */
-#define PN_PROTO_TRANSPORT 0
-/* Phonet datagram socket */
-#define PN_PROTO_PHONET 1
-/* Phonet pipe */
-#define PN_PROTO_PIPE 2
-#define PHONET_NPROTO 3
-
-/* Socket options for SOL_PNPIPE level */
-#define PNPIPE_ENCAP 1
-#define PNPIPE_IFINDEX 2
-#define PNPIPE_HANDLE 3
-#define PNPIPE_INITSTATE 4
-
-#define PNADDR_ANY 0
-#define PNADDR_BROADCAST 0xFC
-#define PNPORT_RESOURCE_ROUTING 0
-
-/* Values for PNPIPE_ENCAP option */
-#define PNPIPE_ENCAP_NONE 0
-#define PNPIPE_ENCAP_IP 1
-
-/* ioctls */
-#define SIOCPNGETOBJECT (SIOCPROTOPRIVATE + 0)
-#define SIOCPNENABLEPIPE (SIOCPROTOPRIVATE + 13)
-#define SIOCPNADDRESOURCE (SIOCPROTOPRIVATE + 14)
-#define SIOCPNDELRESOURCE (SIOCPROTOPRIVATE + 15)
-
-/* Phonet protocol header */
-struct phonethdr {
- __u8 pn_rdev;
- __u8 pn_sdev;
- __u8 pn_res;
- __be16 pn_length;
- __u8 pn_robj;
- __u8 pn_sobj;
-} __attribute__((packed));
-
-/* Common Phonet payload header */
-struct phonetmsg {
- __u8 pn_trans_id; /* transaction ID */
- __u8 pn_msg_id; /* message type */
- union {
- struct {
- __u8 pn_submsg_id; /* message subtype */
- __u8 pn_data[5];
- } base;
- struct {
- __u16 pn_e_res_id; /* extended resource ID */
- __u8 pn_e_submsg_id; /* message subtype */
- __u8 pn_e_data[3];
- } ext;
- } pn_msg_u;
-};
-#define PN_COMMON_MESSAGE 0xF0
-#define PN_COMMGR 0x10
-#define PN_PREFIX 0xE0 /* resource for extended messages */
-#define pn_submsg_id pn_msg_u.base.pn_submsg_id
-#define pn_e_submsg_id pn_msg_u.ext.pn_e_submsg_id
-#define pn_e_res_id pn_msg_u.ext.pn_e_res_id
-#define pn_data pn_msg_u.base.pn_data
-#define pn_e_data pn_msg_u.ext.pn_e_data
-
-/* data for unreachable errors */
-#define PN_COMM_SERVICE_NOT_IDENTIFIED_RESP 0x01
-#define PN_COMM_ISA_ENTITY_NOT_REACHABLE_RESP 0x14
-#define pn_orig_msg_id pn_data[0]
-#define pn_status pn_data[1]
-#define pn_e_orig_msg_id pn_e_data[0]
-#define pn_e_status pn_e_data[1]
-
-/* Phonet socket address structure */
-struct sockaddr_pn {
- __kernel_sa_family_t spn_family;
- __u8 spn_obj;
- __u8 spn_dev;
- __u8 spn_resource;
- __u8 spn_zero[sizeof(struct sockaddr) - sizeof(__kernel_sa_family_t) - 3];
-} __attribute__((packed));
-
-/* Well known address */
-#define PN_DEV_PC 0x10
-
-static inline __u16 pn_object(__u8 addr, __u16 port)
-{
- return (addr << 8) | (port & 0x3ff);
-}
-
-static inline __u8 pn_obj(__u16 handle)
-{
- return handle & 0xff;
-}
-
-static inline __u8 pn_dev(__u16 handle)
-{
- return handle >> 8;
-}
-
-static inline __u16 pn_port(__u16 handle)
-{
- return handle & 0x3ff;
-}
-
-static inline __u8 pn_addr(__u16 handle)
-{
- return (handle >> 8) & 0xfc;
-}
-
-static inline void pn_sockaddr_set_addr(struct sockaddr_pn *spn, __u8 addr)
-{
- spn->spn_dev &= 0x03;
- spn->spn_dev |= addr & 0xfc;
-}
-
-static inline void pn_sockaddr_set_port(struct sockaddr_pn *spn, __u16 port)
-{
- spn->spn_dev &= 0xfc;
- spn->spn_dev |= (port >> 8) & 0x03;
- spn->spn_obj = port & 0xff;
-}
-
-static inline void pn_sockaddr_set_object(struct sockaddr_pn *spn,
- __u16 handle)
-{
- spn->spn_dev = pn_dev(handle);
- spn->spn_obj = pn_obj(handle);
-}
-
-static inline void pn_sockaddr_set_resource(struct sockaddr_pn *spn,
- __u8 resource)
-{
- spn->spn_resource = resource;
-}
-
-static inline __u8 pn_sockaddr_get_addr(const struct sockaddr_pn *spn)
-{
- return spn->spn_dev & 0xfc;
-}
-
-static inline __u16 pn_sockaddr_get_port(const struct sockaddr_pn *spn)
-{
- return ((spn->spn_dev & 0x03) << 8) | spn->spn_obj;
-}
-
-static inline __u16 pn_sockaddr_get_object(const struct sockaddr_pn *spn)
-{
- return pn_object(spn->spn_dev, spn->spn_obj);
-}
-
-static inline __u8 pn_sockaddr_get_resource(const struct sockaddr_pn *spn)
-{
- return spn->spn_resource;
-}
-
-/* Phonet device ioctl requests */
-#ifdef __KERNEL__
#define SIOCPNGAUTOCONF (SIOCDEVPRIVATE + 0)
struct if_phonet_autoconf {
@@ -195,6 +37,4 @@
} ifr_ifru;
};
#define ifr_phonet_autoconf ifr_ifru.ifru_phonet_autoconf
-#endif /* __KERNEL__ */
-
#endif
diff --git a/include/linux/pktcdvd.h b/include/linux/pktcdvd.h
index 721301b..93d142a 100644
--- a/include/linux/pktcdvd.h
+++ b/include/linux/pktcdvd.h
@@ -12,108 +12,13 @@
#ifndef __PKTCDVD_H
#define __PKTCDVD_H
-#include <linux/types.h>
-
-/*
- * 1 for normal debug messages, 2 is very verbose. 0 to turn it off.
- */
-#define PACKET_DEBUG 1
-
-#define MAX_WRITERS 8
-
-#define PKT_RB_POOL_SIZE 512
-
-/*
- * How long we should hold a non-full packet before starting data gathering.
- */
-#define PACKET_WAIT_TIME (HZ * 5 / 1000)
-
-/*
- * use drive write caching -- we need deferred error handling to be
- * able to successfully recover with this option (drive will return good
- * status as soon as the cdb is validated).
- */
-#if defined(CONFIG_CDROM_PKTCDVD_WCACHE)
-#define USE_WCACHING 1
-#else
-#define USE_WCACHING 0
-#endif
-
-/*
- * No user-servicable parts beyond this point ->
- */
-
-/*
- * device types
- */
-#define PACKET_CDR 1
-#define PACKET_CDRW 2
-#define PACKET_DVDR 3
-#define PACKET_DVDRW 4
-
-/*
- * flags
- */
-#define PACKET_WRITABLE 1 /* pd is writable */
-#define PACKET_NWA_VALID 2 /* next writable address valid */
-#define PACKET_LRA_VALID 3 /* last recorded address valid */
-#define PACKET_MERGE_SEGS 4 /* perform segment merging to keep */
- /* underlying cdrom device happy */
-
-/*
- * Disc status -- from READ_DISC_INFO
- */
-#define PACKET_DISC_EMPTY 0
-#define PACKET_DISC_INCOMPLETE 1
-#define PACKET_DISC_COMPLETE 2
-#define PACKET_DISC_OTHER 3
-
-/*
- * write type, and corresponding data block type
- */
-#define PACKET_MODE1 1
-#define PACKET_MODE2 2
-#define PACKET_BLOCK_MODE1 8
-#define PACKET_BLOCK_MODE2 10
-
-/*
- * Last session/border status
- */
-#define PACKET_SESSION_EMPTY 0
-#define PACKET_SESSION_INCOMPLETE 1
-#define PACKET_SESSION_RESERVED 2
-#define PACKET_SESSION_COMPLETE 3
-
-#define PACKET_MCN "4a656e734178626f65323030300000"
-
-#undef PACKET_USE_LS
-
-#define PKT_CTRL_CMD_SETUP 0
-#define PKT_CTRL_CMD_TEARDOWN 1
-#define PKT_CTRL_CMD_STATUS 2
-
-struct pkt_ctrl_command {
- __u32 command; /* in: Setup, teardown, status */
- __u32 dev_index; /* in/out: Device index */
- __u32 dev; /* in/out: Device nr for cdrw device */
- __u32 pkt_dev; /* in/out: Device nr for packet device */
- __u32 num_devices; /* out: Largest device index + 1 */
- __u32 padding; /* Not used */
-};
-
-/*
- * packet ioctls
- */
-#define PACKET_IOCTL_MAGIC ('X')
-#define PACKET_CTRL_CMD _IOWR(PACKET_IOCTL_MAGIC, 1, struct pkt_ctrl_command)
-
-#ifdef __KERNEL__
#include <linux/blkdev.h>
#include <linux/completion.h>
#include <linux/cdrom.h>
#include <linux/kobject.h>
#include <linux/sysfs.h>
#include <linux/mempool.h>
+#include <uapi/linux/pktcdvd.h>
/* default bio write queue congestion marks */
#define PKT_WRITE_CONGESTION_ON 10000
@@ -297,6 +202,4 @@
struct dentry *dfs_f_info; /* debugfs: info file */
};
-#endif /* __KERNEL__ */
-
#endif /* __PKTCDVD_H */
diff --git a/include/linux/pmu.h b/include/linux/pmu.h
index 84e6a55..99b400b 100644
--- a/include/linux/pmu.h
+++ b/include/linux/pmu.h
@@ -5,137 +5,11 @@
*
* Copyright (C) 1998 Paul Mackerras.
*/
-
#ifndef _LINUX_PMU_H
#define _LINUX_PMU_H
-#define PMU_DRIVER_VERSION 2
+#include <uapi/linux/pmu.h>
-/*
- * PMU commands
- */
-#define PMU_POWER_CTRL0 0x10 /* control power of some devices */
-#define PMU_POWER_CTRL 0x11 /* control power of some devices */
-#define PMU_ADB_CMD 0x20 /* send ADB packet */
-#define PMU_ADB_POLL_OFF 0x21 /* disable ADB auto-poll */
-#define PMU_WRITE_NVRAM 0x33 /* write non-volatile RAM */
-#define PMU_READ_NVRAM 0x3b /* read non-volatile RAM */
-#define PMU_SET_RTC 0x30 /* set real-time clock */
-#define PMU_READ_RTC 0x38 /* read real-time clock */
-#define PMU_SET_VOLBUTTON 0x40 /* set volume up/down position */
-#define PMU_BACKLIGHT_BRIGHT 0x41 /* set backlight brightness */
-#define PMU_GET_VOLBUTTON 0x48 /* get volume up/down position */
-#define PMU_PCEJECT 0x4c /* eject PC-card from slot */
-#define PMU_BATTERY_STATE 0x6b /* report battery state etc. */
-#define PMU_SMART_BATTERY_STATE 0x6f /* report battery state (new way) */
-#define PMU_SET_INTR_MASK 0x70 /* set PMU interrupt mask */
-#define PMU_INT_ACK 0x78 /* read interrupt bits */
-#define PMU_SHUTDOWN 0x7e /* turn power off */
-#define PMU_CPU_SPEED 0x7d /* control CPU speed on some models */
-#define PMU_SLEEP 0x7f /* put CPU to sleep */
-#define PMU_POWER_EVENTS 0x8f /* Send power-event commands to PMU */
-#define PMU_I2C_CMD 0x9a /* I2C operations */
-#define PMU_RESET 0xd0 /* reset CPU */
-#define PMU_GET_BRIGHTBUTTON 0xd9 /* report brightness up/down pos */
-#define PMU_GET_COVER 0xdc /* report cover open/closed */
-#define PMU_SYSTEM_READY 0xdf /* tell PMU we are awake */
-#define PMU_GET_VERSION 0xea /* read the PMU version */
-
-/* Bits to use with the PMU_POWER_CTRL0 command */
-#define PMU_POW0_ON 0x80 /* OR this to power ON the device */
-#define PMU_POW0_OFF 0x00 /* leave bit 7 to 0 to power it OFF */
-#define PMU_POW0_HARD_DRIVE 0x04 /* Hard drive power (on wallstreet/lombard ?) */
-
-/* Bits to use with the PMU_POWER_CTRL command */
-#define PMU_POW_ON 0x80 /* OR this to power ON the device */
-#define PMU_POW_OFF 0x00 /* leave bit 7 to 0 to power it OFF */
-#define PMU_POW_BACKLIGHT 0x01 /* backlight power */
-#define PMU_POW_CHARGER 0x02 /* battery charger power */
-#define PMU_POW_IRLED 0x04 /* IR led power (on wallstreet) */
-#define PMU_POW_MEDIABAY 0x08 /* media bay power (wallstreet/lombard ?) */
-
-/* Bits in PMU interrupt and interrupt mask bytes */
-#define PMU_INT_PCEJECT 0x04 /* PC-card eject buttons */
-#define PMU_INT_SNDBRT 0x08 /* sound/brightness up/down buttons */
-#define PMU_INT_ADB 0x10 /* ADB autopoll or reply data */
-#define PMU_INT_BATTERY 0x20 /* Battery state change */
-#define PMU_INT_ENVIRONMENT 0x40 /* Environment interrupts */
-#define PMU_INT_TICK 0x80 /* 1-second tick interrupt */
-
-/* Other bits in PMU interrupt valid when PMU_INT_ADB is set */
-#define PMU_INT_ADB_AUTO 0x04 /* ADB autopoll, when PMU_INT_ADB */
-#define PMU_INT_WAITING_CHARGER 0x01 /* ??? */
-#define PMU_INT_AUTO_SRQ_POLL 0x02 /* ??? */
-
-/* Bits in the environement message (either obtained via PMU_GET_COVER,
- * or via PMU_INT_ENVIRONMENT on core99 */
-#define PMU_ENV_LID_CLOSED 0x01 /* The lid is closed */
-
-/* I2C related definitions */
-#define PMU_I2C_MODE_SIMPLE 0
-#define PMU_I2C_MODE_STDSUB 1
-#define PMU_I2C_MODE_COMBINED 2
-
-#define PMU_I2C_BUS_STATUS 0
-#define PMU_I2C_BUS_SYSCLK 1
-#define PMU_I2C_BUS_POWER 2
-
-#define PMU_I2C_STATUS_OK 0
-#define PMU_I2C_STATUS_DATAREAD 1
-#define PMU_I2C_STATUS_BUSY 0xfe
-
-
-/* Kind of PMU (model) */
-enum {
- PMU_UNKNOWN,
- PMU_OHARE_BASED, /* 2400, 3400, 3500 (old G3 powerbook) */
- PMU_HEATHROW_BASED, /* PowerBook G3 series */
- PMU_PADDINGTON_BASED, /* 1999 PowerBook G3 */
- PMU_KEYLARGO_BASED, /* Core99 motherboard (PMU99) */
- PMU_68K_V1, /* 68K PMU, version 1 */
- PMU_68K_V2, /* 68K PMU, version 2 */
-};
-
-/* PMU PMU_POWER_EVENTS commands */
-enum {
- PMU_PWR_GET_POWERUP_EVENTS = 0x00,
- PMU_PWR_SET_POWERUP_EVENTS = 0x01,
- PMU_PWR_CLR_POWERUP_EVENTS = 0x02,
- PMU_PWR_GET_WAKEUP_EVENTS = 0x03,
- PMU_PWR_SET_WAKEUP_EVENTS = 0x04,
- PMU_PWR_CLR_WAKEUP_EVENTS = 0x05,
-};
-
-/* Power events wakeup bits */
-enum {
- PMU_PWR_WAKEUP_KEY = 0x01, /* Wake on key press */
- PMU_PWR_WAKEUP_AC_INSERT = 0x02, /* Wake on AC adapter plug */
- PMU_PWR_WAKEUP_AC_CHANGE = 0x04,
- PMU_PWR_WAKEUP_LID_OPEN = 0x08,
- PMU_PWR_WAKEUP_RING = 0x10,
-};
-
-/*
- * Ioctl commands for the /dev/pmu device
- */
-#include <linux/ioctl.h>
-
-/* no param */
-#define PMU_IOC_SLEEP _IO('B', 0)
-/* out param: u32* backlight value: 0 to 15 */
-#define PMU_IOC_GET_BACKLIGHT _IOR('B', 1, size_t)
-/* in param: u32 backlight value: 0 to 15 */
-#define PMU_IOC_SET_BACKLIGHT _IOW('B', 2, size_t)
-/* out param: u32* PMU model */
-#define PMU_IOC_GET_MODEL _IOR('B', 3, size_t)
-/* out param: u32* has_adb: 0 or 1 */
-#define PMU_IOC_HAS_ADB _IOR('B', 4, size_t)
-/* out param: u32* can_sleep: 0 or 1 */
-#define PMU_IOC_CAN_SLEEP _IOR('B', 5, size_t)
-/* no param, but historically was _IOR('B', 6, 0), meaning 4 bytes */
-#define PMU_IOC_GRAB_BACKLIGHT _IOR('B', 6, size_t)
-
-#ifdef __KERNEL__
extern int find_via_pmu(void);
@@ -208,6 +82,4 @@
#define pmu_sys_suspended 0
#endif
-#endif /* __KERNEL__ */
-
#endif /* _LINUX_PMU_H */
diff --git a/include/linux/poll.h b/include/linux/poll.h
index 48fe8bc..c08386f 100644
--- a/include/linux/poll.h
+++ b/include/linux/poll.h
@@ -1,9 +1,6 @@
#ifndef _LINUX_POLL_H
#define _LINUX_POLL_H
-#include <asm/poll.h>
-
-#ifdef __KERNEL__
#include <linux/compiler.h>
#include <linux/ktime.h>
@@ -12,6 +9,7 @@
#include <linux/fs.h>
#include <linux/sysctl.h>
#include <asm/uaccess.h>
+#include <uapi/linux/poll.h>
extern struct ctl_table epoll_table[]; /* for sysctl */
/* ~832 bytes of stack space used max in sys_select/sys_poll before allocating
@@ -163,6 +161,4 @@
extern int poll_select_set_timeout(struct timespec *to, long sec, long nsec);
-#endif /* KERNEL */
-
#endif /* _LINUX_POLL_H */
diff --git a/include/linux/ppp-comp.h b/include/linux/ppp-comp.h
index e53ff659..4ea1d37 100644
--- a/include/linux/ppp-comp.h
+++ b/include/linux/ppp-comp.h
@@ -10,6 +10,9 @@
#ifndef _NET_PPP_COMP_H
#define _NET_PPP_COMP_H
+#include <uapi/linux/ppp-comp.h>
+
+
struct module;
/*
@@ -98,87 +101,6 @@
#define DECOMP_ERROR -1 /* error detected before decomp. */
#define DECOMP_FATALERROR -2 /* error detected after decomp. */
-/*
- * CCP codes.
- */
-
-#define CCP_CONFREQ 1
-#define CCP_CONFACK 2
-#define CCP_TERMREQ 5
-#define CCP_TERMACK 6
-#define CCP_RESETREQ 14
-#define CCP_RESETACK 15
-
-/*
- * Max # bytes for a CCP option
- */
-
-#define CCP_MAX_OPTION_LENGTH 32
-
-/*
- * Parts of a CCP packet.
- */
-
-#define CCP_CODE(dp) ((dp)[0])
-#define CCP_ID(dp) ((dp)[1])
-#define CCP_LENGTH(dp) (((dp)[2] << 8) + (dp)[3])
-#define CCP_HDRLEN 4
-
-#define CCP_OPT_CODE(dp) ((dp)[0])
-#define CCP_OPT_LENGTH(dp) ((dp)[1])
-#define CCP_OPT_MINLEN 2
-
-/*
- * Definitions for BSD-Compress.
- */
-
-#define CI_BSD_COMPRESS 21 /* config. option for BSD-Compress */
-#define CILEN_BSD_COMPRESS 3 /* length of config. option */
-
-/* Macros for handling the 3rd byte of the BSD-Compress config option. */
-#define BSD_NBITS(x) ((x) & 0x1F) /* number of bits requested */
-#define BSD_VERSION(x) ((x) >> 5) /* version of option format */
-#define BSD_CURRENT_VERSION 1 /* current version number */
-#define BSD_MAKE_OPT(v, n) (((v) << 5) | (n))
-
-#define BSD_MIN_BITS 9 /* smallest code size supported */
-#define BSD_MAX_BITS 15 /* largest code size supported */
-
-/*
- * Definitions for Deflate.
- */
-
-#define CI_DEFLATE 26 /* config option for Deflate */
-#define CI_DEFLATE_DRAFT 24 /* value used in original draft RFC */
-#define CILEN_DEFLATE 4 /* length of its config option */
-
-#define DEFLATE_MIN_SIZE 9
-#define DEFLATE_MAX_SIZE 15
-#define DEFLATE_METHOD_VAL 8
-#define DEFLATE_SIZE(x) (((x) >> 4) + 8)
-#define DEFLATE_METHOD(x) ((x) & 0x0F)
-#define DEFLATE_MAKE_OPT(w) ((((w) - 8) << 4) + DEFLATE_METHOD_VAL)
-#define DEFLATE_CHK_SEQUENCE 0
-
-/*
- * Definitions for MPPE.
- */
-
-#define CI_MPPE 18 /* config option for MPPE */
-#define CILEN_MPPE 6 /* length of config option */
-
-/*
- * Definitions for other, as yet unsupported, compression methods.
- */
-
-#define CI_PREDICTOR_1 1 /* config option for Predictor-1 */
-#define CILEN_PREDICTOR_1 2 /* length of its config option */
-#define CI_PREDICTOR_2 2 /* config option for Predictor-2 */
-#define CILEN_PREDICTOR_2 2 /* length of its config option */
-
-#ifdef __KERNEL__
extern int ppp_register_compressor(struct compressor *);
extern void ppp_unregister_compressor(struct compressor *);
-#endif /* __KERNEL__ */
-
#endif /* _NET_PPP_COMP_H */
diff --git a/include/linux/ppp_defs.h b/include/linux/ppp_defs.h
index ba416f6..28aa023 100644
--- a/include/linux/ppp_defs.h
+++ b/include/linux/ppp_defs.h
@@ -7,148 +7,11 @@
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*/
-#include <linux/types.h>
-
#ifndef _PPP_DEFS_H_
#define _PPP_DEFS_H_
-/*
- * The basic PPP frame.
- */
-#define PPP_HDRLEN 4 /* octets for standard ppp header */
-#define PPP_FCSLEN 2 /* octets for FCS */
-#define PPP_MRU 1500 /* default MRU = max length of info field */
-
-#define PPP_ADDRESS(p) (((__u8 *)(p))[0])
-#define PPP_CONTROL(p) (((__u8 *)(p))[1])
-#define PPP_PROTOCOL(p) ((((__u8 *)(p))[2] << 8) + ((__u8 *)(p))[3])
-
-/*
- * Significant octet values.
- */
-#define PPP_ALLSTATIONS 0xff /* All-Stations broadcast address */
-#define PPP_UI 0x03 /* Unnumbered Information */
-#define PPP_FLAG 0x7e /* Flag Sequence */
-#define PPP_ESCAPE 0x7d /* Asynchronous Control Escape */
-#define PPP_TRANS 0x20 /* Asynchronous transparency modifier */
-
-/*
- * Protocol field values.
- */
-#define PPP_IP 0x21 /* Internet Protocol */
-#define PPP_AT 0x29 /* AppleTalk Protocol */
-#define PPP_IPX 0x2b /* IPX protocol */
-#define PPP_VJC_COMP 0x2d /* VJ compressed TCP */
-#define PPP_VJC_UNCOMP 0x2f /* VJ uncompressed TCP */
-#define PPP_MP 0x3d /* Multilink protocol */
-#define PPP_IPV6 0x57 /* Internet Protocol Version 6 */
-#define PPP_COMPFRAG 0xfb /* fragment compressed below bundle */
-#define PPP_COMP 0xfd /* compressed packet */
-#define PPP_MPLS_UC 0x0281 /* Multi Protocol Label Switching - Unicast */
-#define PPP_MPLS_MC 0x0283 /* Multi Protocol Label Switching - Multicast */
-#define PPP_IPCP 0x8021 /* IP Control Protocol */
-#define PPP_ATCP 0x8029 /* AppleTalk Control Protocol */
-#define PPP_IPXCP 0x802b /* IPX Control Protocol */
-#define PPP_IPV6CP 0x8057 /* IPv6 Control Protocol */
-#define PPP_CCPFRAG 0x80fb /* CCP at link level (below MP bundle) */
-#define PPP_CCP 0x80fd /* Compression Control Protocol */
-#define PPP_MPLSCP 0x80fd /* MPLS Control Protocol */
-#define PPP_LCP 0xc021 /* Link Control Protocol */
-#define PPP_PAP 0xc023 /* Password Authentication Protocol */
-#define PPP_LQR 0xc025 /* Link Quality Report protocol */
-#define PPP_CHAP 0xc223 /* Cryptographic Handshake Auth. Protocol */
-#define PPP_CBCP 0xc029 /* Callback Control Protocol */
-
-/*
- * Values for FCS calculations.
- */
-
-#define PPP_INITFCS 0xffff /* Initial FCS value */
-#define PPP_GOODFCS 0xf0b8 /* Good final FCS value */
-
-#ifdef __KERNEL__
#include <linux/crc-ccitt.h>
+#include <uapi/linux/ppp_defs.h>
+
#define PPP_FCS(fcs, c) crc_ccitt_byte(fcs, c)
-#endif
-
-/*
- * Extended asyncmap - allows any character to be escaped.
- */
-
-typedef __u32 ext_accm[8];
-
-/*
- * What to do with network protocol (NP) packets.
- */
-enum NPmode {
- NPMODE_PASS, /* pass the packet through */
- NPMODE_DROP, /* silently drop the packet */
- NPMODE_ERROR, /* return an error */
- NPMODE_QUEUE /* save it up for later. */
-};
-
-/*
- * Statistics for LQRP and pppstats
- */
-struct pppstat {
- __u32 ppp_discards; /* # frames discarded */
-
- __u32 ppp_ibytes; /* bytes received */
- __u32 ppp_ioctects; /* bytes received not in error */
- __u32 ppp_ipackets; /* packets received */
- __u32 ppp_ierrors; /* receive errors */
- __u32 ppp_ilqrs; /* # LQR frames received */
-
- __u32 ppp_obytes; /* raw bytes sent */
- __u32 ppp_ooctects; /* frame bytes sent */
- __u32 ppp_opackets; /* packets sent */
- __u32 ppp_oerrors; /* transmit errors */
- __u32 ppp_olqrs; /* # LQR frames sent */
-};
-
-struct vjstat {
- __u32 vjs_packets; /* outbound packets */
- __u32 vjs_compressed; /* outbound compressed packets */
- __u32 vjs_searches; /* searches for connection state */
- __u32 vjs_misses; /* times couldn't find conn. state */
- __u32 vjs_uncompressedin; /* inbound uncompressed packets */
- __u32 vjs_compressedin; /* inbound compressed packets */
- __u32 vjs_errorin; /* inbound unknown type packets */
- __u32 vjs_tossed; /* inbound packets tossed because of error */
-};
-
-struct compstat {
- __u32 unc_bytes; /* total uncompressed bytes */
- __u32 unc_packets; /* total uncompressed packets */
- __u32 comp_bytes; /* compressed bytes */
- __u32 comp_packets; /* compressed packets */
- __u32 inc_bytes; /* incompressible bytes */
- __u32 inc_packets; /* incompressible packets */
-
- /* the compression ratio is defined as in_count / bytes_out */
- __u32 in_count; /* Bytes received */
- __u32 bytes_out; /* Bytes transmitted */
-
- double ratio; /* not computed in kernel. */
-};
-
-struct ppp_stats {
- struct pppstat p; /* basic PPP statistics */
- struct vjstat vj; /* VJ header compression statistics */
-};
-
-struct ppp_comp_stats {
- struct compstat c; /* packet compression statistics */
- struct compstat d; /* packet decompression statistics */
-};
-
-/*
- * The following structure records the time in seconds since
- * the last NP packet was sent or received.
- */
-struct ppp_idle {
- __kernel_time_t xmit_idle; /* time since last NP packet sent */
- __kernel_time_t recv_idle; /* time since last NP packet received */
-};
-
#endif /* _PPP_DEFS_H_ */
diff --git a/include/linux/ptrace.h b/include/linux/ptrace.h
index 1d24ffa..e0ff468 100644
--- a/include/linux/ptrace.h
+++ b/include/linux/ptrace.h
@@ -1,82 +1,12 @@
#ifndef _LINUX_PTRACE_H
#define _LINUX_PTRACE_H
-/* ptrace.h */
-/* structs and defines to help the user use the ptrace system call. */
-/* has the defines to get at the registers. */
+#include <linux/compiler.h> /* For unlikely. */
+#include <linux/sched.h> /* For struct task_struct. */
+#include <linux/err.h> /* for IS_ERR_VALUE */
+#include <linux/bug.h> /* For BUG_ON. */
+#include <uapi/linux/ptrace.h>
-#define PTRACE_TRACEME 0
-#define PTRACE_PEEKTEXT 1
-#define PTRACE_PEEKDATA 2
-#define PTRACE_PEEKUSR 3
-#define PTRACE_POKETEXT 4
-#define PTRACE_POKEDATA 5
-#define PTRACE_POKEUSR 6
-#define PTRACE_CONT 7
-#define PTRACE_KILL 8
-#define PTRACE_SINGLESTEP 9
-
-#define PTRACE_ATTACH 16
-#define PTRACE_DETACH 17
-
-#define PTRACE_SYSCALL 24
-
-/* 0x4200-0x4300 are reserved for architecture-independent additions. */
-#define PTRACE_SETOPTIONS 0x4200
-#define PTRACE_GETEVENTMSG 0x4201
-#define PTRACE_GETSIGINFO 0x4202
-#define PTRACE_SETSIGINFO 0x4203
-
-/*
- * Generic ptrace interface that exports the architecture specific regsets
- * using the corresponding NT_* types (which are also used in the core dump).
- * Please note that the NT_PRSTATUS note type in a core dump contains a full
- * 'struct elf_prstatus'. But the user_regset for NT_PRSTATUS contains just the
- * elf_gregset_t that is the pr_reg field of 'struct elf_prstatus'. For all the
- * other user_regset flavors, the user_regset layout and the ELF core dump note
- * payload are exactly the same layout.
- *
- * This interface usage is as follows:
- * struct iovec iov = { buf, len};
- *
- * ret = ptrace(PTRACE_GETREGSET/PTRACE_SETREGSET, pid, NT_XXX_TYPE, &iov);
- *
- * On the successful completion, iov.len will be updated by the kernel,
- * specifying how much the kernel has written/read to/from the user's iov.buf.
- */
-#define PTRACE_GETREGSET 0x4204
-#define PTRACE_SETREGSET 0x4205
-
-#define PTRACE_SEIZE 0x4206
-#define PTRACE_INTERRUPT 0x4207
-#define PTRACE_LISTEN 0x4208
-
-/* Wait extended result codes for the above trace options. */
-#define PTRACE_EVENT_FORK 1
-#define PTRACE_EVENT_VFORK 2
-#define PTRACE_EVENT_CLONE 3
-#define PTRACE_EVENT_EXEC 4
-#define PTRACE_EVENT_VFORK_DONE 5
-#define PTRACE_EVENT_EXIT 6
-#define PTRACE_EVENT_SECCOMP 7
-/* Extended result codes which enabled by means other than options. */
-#define PTRACE_EVENT_STOP 128
-
-/* Options set using PTRACE_SETOPTIONS or using PTRACE_SEIZE @data param */
-#define PTRACE_O_TRACESYSGOOD 1
-#define PTRACE_O_TRACEFORK (1 << PTRACE_EVENT_FORK)
-#define PTRACE_O_TRACEVFORK (1 << PTRACE_EVENT_VFORK)
-#define PTRACE_O_TRACECLONE (1 << PTRACE_EVENT_CLONE)
-#define PTRACE_O_TRACEEXEC (1 << PTRACE_EVENT_EXEC)
-#define PTRACE_O_TRACEVFORKDONE (1 << PTRACE_EVENT_VFORK_DONE)
-#define PTRACE_O_TRACEEXIT (1 << PTRACE_EVENT_EXIT)
-#define PTRACE_O_TRACESECCOMP (1 << PTRACE_EVENT_SECCOMP)
-
-#define PTRACE_O_MASK 0x000000ff
-
-#include <asm/ptrace.h>
-
-#ifdef __KERNEL__
/*
* Ptrace flags
*
@@ -108,12 +38,6 @@
#define PT_BLOCKSTEP_BIT 30
#define PT_BLOCKSTEP (1<<PT_BLOCKSTEP_BIT)
-#include <linux/compiler.h> /* For unlikely. */
-#include <linux/sched.h> /* For struct task_struct. */
-#include <linux/err.h> /* for IS_ERR_VALUE */
-#include <linux/bug.h> /* For BUG_ON. */
-
-
extern long arch_ptrace(struct task_struct *child, long request,
unsigned long addr, unsigned long data);
extern int ptrace_readdata(struct task_struct *tsk, unsigned long src, char __user *dst, int len);
@@ -416,6 +340,4 @@
static inline void ptrace_put_breakpoints(struct task_struct *tsk) { }
#endif /* CONFIG_HAVE_HW_BREAKPOINT */
-#endif /* __KERNEL */
-
#endif
diff --git a/include/linux/quota.h b/include/linux/quota.h
index dcd5721..58fdef12 100644
--- a/include/linux/quota.h
+++ b/include/linux/quota.h
@@ -29,146 +29,9 @@
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
-
#ifndef _LINUX_QUOTA_
#define _LINUX_QUOTA_
-#include <linux/errno.h>
-#include <linux/types.h>
-
-#define __DQUOT_VERSION__ "dquot_6.5.2"
-
-#define MAXQUOTAS 2
-#define USRQUOTA 0 /* element used for user quotas */
-#define GRPQUOTA 1 /* element used for group quotas */
-
-/*
- * Definitions for the default names of the quotas files.
- */
-#define INITQFNAMES { \
- "user", /* USRQUOTA */ \
- "group", /* GRPQUOTA */ \
- "undefined", \
-};
-
-/*
- * Command definitions for the 'quotactl' system call.
- * The commands are broken into a main command defined below
- * and a subcommand that is used to convey the type of
- * quota that is being manipulated (see above).
- */
-#define SUBCMDMASK 0x00ff
-#define SUBCMDSHIFT 8
-#define QCMD(cmd, type) (((cmd) << SUBCMDSHIFT) | ((type) & SUBCMDMASK))
-
-#define Q_SYNC 0x800001 /* sync disk copy of a filesystems quotas */
-#define Q_QUOTAON 0x800002 /* turn quotas on */
-#define Q_QUOTAOFF 0x800003 /* turn quotas off */
-#define Q_GETFMT 0x800004 /* get quota format used on given filesystem */
-#define Q_GETINFO 0x800005 /* get information about quota files */
-#define Q_SETINFO 0x800006 /* set information about quota files */
-#define Q_GETQUOTA 0x800007 /* get user quota structure */
-#define Q_SETQUOTA 0x800008 /* set user quota structure */
-
-/* Quota format type IDs */
-#define QFMT_VFS_OLD 1
-#define QFMT_VFS_V0 2
-#define QFMT_OCFS2 3
-#define QFMT_VFS_V1 4
-
-/* Size of block in which space limits are passed through the quota
- * interface */
-#define QIF_DQBLKSIZE_BITS 10
-#define QIF_DQBLKSIZE (1 << QIF_DQBLKSIZE_BITS)
-
-/*
- * Quota structure used for communication with userspace via quotactl
- * Following flags are used to specify which fields are valid
- */
-enum {
- QIF_BLIMITS_B = 0,
- QIF_SPACE_B,
- QIF_ILIMITS_B,
- QIF_INODES_B,
- QIF_BTIME_B,
- QIF_ITIME_B,
-};
-
-#define QIF_BLIMITS (1 << QIF_BLIMITS_B)
-#define QIF_SPACE (1 << QIF_SPACE_B)
-#define QIF_ILIMITS (1 << QIF_ILIMITS_B)
-#define QIF_INODES (1 << QIF_INODES_B)
-#define QIF_BTIME (1 << QIF_BTIME_B)
-#define QIF_ITIME (1 << QIF_ITIME_B)
-#define QIF_LIMITS (QIF_BLIMITS | QIF_ILIMITS)
-#define QIF_USAGE (QIF_SPACE | QIF_INODES)
-#define QIF_TIMES (QIF_BTIME | QIF_ITIME)
-#define QIF_ALL (QIF_LIMITS | QIF_USAGE | QIF_TIMES)
-
-struct if_dqblk {
- __u64 dqb_bhardlimit;
- __u64 dqb_bsoftlimit;
- __u64 dqb_curspace;
- __u64 dqb_ihardlimit;
- __u64 dqb_isoftlimit;
- __u64 dqb_curinodes;
- __u64 dqb_btime;
- __u64 dqb_itime;
- __u32 dqb_valid;
-};
-
-/*
- * Structure used for setting quota information about file via quotactl
- * Following flags are used to specify which fields are valid
- */
-#define IIF_BGRACE 1
-#define IIF_IGRACE 2
-#define IIF_FLAGS 4
-#define IIF_ALL (IIF_BGRACE | IIF_IGRACE | IIF_FLAGS)
-
-struct if_dqinfo {
- __u64 dqi_bgrace;
- __u64 dqi_igrace;
- __u32 dqi_flags;
- __u32 dqi_valid;
-};
-
-/*
- * Definitions for quota netlink interface
- */
-#define QUOTA_NL_NOWARN 0
-#define QUOTA_NL_IHARDWARN 1 /* Inode hardlimit reached */
-#define QUOTA_NL_ISOFTLONGWARN 2 /* Inode grace time expired */
-#define QUOTA_NL_ISOFTWARN 3 /* Inode softlimit reached */
-#define QUOTA_NL_BHARDWARN 4 /* Block hardlimit reached */
-#define QUOTA_NL_BSOFTLONGWARN 5 /* Block grace time expired */
-#define QUOTA_NL_BSOFTWARN 6 /* Block softlimit reached */
-#define QUOTA_NL_IHARDBELOW 7 /* Usage got below inode hardlimit */
-#define QUOTA_NL_ISOFTBELOW 8 /* Usage got below inode softlimit */
-#define QUOTA_NL_BHARDBELOW 9 /* Usage got below block hardlimit */
-#define QUOTA_NL_BSOFTBELOW 10 /* Usage got below block softlimit */
-
-enum {
- QUOTA_NL_C_UNSPEC,
- QUOTA_NL_C_WARNING,
- __QUOTA_NL_C_MAX,
-};
-#define QUOTA_NL_C_MAX (__QUOTA_NL_C_MAX - 1)
-
-enum {
- QUOTA_NL_A_UNSPEC,
- QUOTA_NL_A_QTYPE,
- QUOTA_NL_A_EXCESS_ID,
- QUOTA_NL_A_WARNING,
- QUOTA_NL_A_DEV_MAJOR,
- QUOTA_NL_A_DEV_MINOR,
- QUOTA_NL_A_CAUSED_ID,
- __QUOTA_NL_A_MAX,
-};
-#define QUOTA_NL_A_MAX (__QUOTA_NL_A_MAX - 1)
-
-
-#ifdef __KERNEL__
#include <linux/list.h>
#include <linux/mutex.h>
#include <linux/rwsem.h>
@@ -183,6 +46,7 @@
#include <linux/atomic.h>
#include <linux/uidgid.h>
#include <linux/projid.h>
+#include <uapi/linux/quota.h>
#undef USRQUOTA
#undef GRPQUOTA
@@ -543,5 +407,4 @@
{QFMT_VFS_V0, "quota_v2"},\
{0, NULL}}
-#endif /* __KERNEL__ */
#endif /* _QUOTA_ */
diff --git a/include/linux/random.h b/include/linux/random.h
index ac621ce..6330ed4 100644
--- a/include/linux/random.h
+++ b/include/linux/random.h
@@ -3,50 +3,11 @@
*
* Include file for the random number generator.
*/
-
#ifndef _LINUX_RANDOM_H
#define _LINUX_RANDOM_H
-#include <linux/types.h>
-#include <linux/ioctl.h>
-#include <linux/irqnr.h>
+#include <uapi/linux/random.h>
-/* ioctl()'s for the random number generator */
-
-/* Get the entropy count. */
-#define RNDGETENTCNT _IOR( 'R', 0x00, int )
-
-/* Add to (or subtract from) the entropy count. (Superuser only.) */
-#define RNDADDTOENTCNT _IOW( 'R', 0x01, int )
-
-/* Get the contents of the entropy pool. (Superuser only.) */
-#define RNDGETPOOL _IOR( 'R', 0x02, int [2] )
-
-/*
- * Write bytes into the entropy pool and add to the entropy count.
- * (Superuser only.)
- */
-#define RNDADDENTROPY _IOW( 'R', 0x03, int [2] )
-
-/* Clear entropy count to 0. (Superuser only.) */
-#define RNDZAPENTCNT _IO( 'R', 0x04 )
-
-/* Clear the entropy pool and associated counters. (Superuser only.) */
-#define RNDCLEARPOOL _IO( 'R', 0x06 )
-
-struct rand_pool_info {
- int entropy_count;
- int buf_size;
- __u32 buf[0];
-};
-
-struct rnd_state {
- __u32 s1, s2, s3;
-};
-
-/* Exported functions */
-
-#ifdef __KERNEL__
extern void add_device_randomness(const void *, unsigned int);
extern void add_input_randomness(unsigned int type, unsigned int code,
@@ -104,6 +65,4 @@
}
#endif
-#endif /* __KERNEL___ */
-
#endif /* _LINUX_RANDOM_H */
diff --git a/include/linux/reboot.h b/include/linux/reboot.h
index e0879a7..23b3630 100644
--- a/include/linux/reboot.h
+++ b/include/linux/reboot.h
@@ -1,43 +1,9 @@
#ifndef _LINUX_REBOOT_H
#define _LINUX_REBOOT_H
-/*
- * Magic values required to use _reboot() system call.
- */
-
-#define LINUX_REBOOT_MAGIC1 0xfee1dead
-#define LINUX_REBOOT_MAGIC2 672274793
-#define LINUX_REBOOT_MAGIC2A 85072278
-#define LINUX_REBOOT_MAGIC2B 369367448
-#define LINUX_REBOOT_MAGIC2C 537993216
-
-
-/*
- * Commands accepted by the _reboot() system call.
- *
- * RESTART Restart system using default command and mode.
- * HALT Stop OS and give system control to ROM monitor, if any.
- * CAD_ON Ctrl-Alt-Del sequence causes RESTART command.
- * CAD_OFF Ctrl-Alt-Del sequence sends SIGINT to init task.
- * POWER_OFF Stop OS and remove all power from system, if possible.
- * RESTART2 Restart system using given command string.
- * SW_SUSPEND Suspend system using software suspend if compiled in.
- * KEXEC Restart system using a previously loaded Linux kernel
- */
-
-#define LINUX_REBOOT_CMD_RESTART 0x01234567
-#define LINUX_REBOOT_CMD_HALT 0xCDEF0123
-#define LINUX_REBOOT_CMD_CAD_ON 0x89ABCDEF
-#define LINUX_REBOOT_CMD_CAD_OFF 0x00000000
-#define LINUX_REBOOT_CMD_POWER_OFF 0x4321FEDC
-#define LINUX_REBOOT_CMD_RESTART2 0xA1B2C3D4
-#define LINUX_REBOOT_CMD_SW_SUSPEND 0xD000FCE2
-#define LINUX_REBOOT_CMD_KEXEC 0x45584543
-
-
-#ifdef __KERNEL__
#include <linux/notifier.h>
+#include <uapi/linux/reboot.h>
#define SYS_DOWN 0x0001 /* Notify of system down */
#define SYS_RESTART SYS_DOWN
@@ -84,6 +50,4 @@
extern void emergency_restart(void);
#include <asm/emergency-restart.h>
-#endif
-
#endif /* _LINUX_REBOOT_H */
diff --git a/include/linux/resource.h b/include/linux/resource.h
index d01c96c..5bc3116 100644
--- a/include/linux/resource.h
+++ b/include/linux/resource.h
@@ -1,82 +1,8 @@
#ifndef _LINUX_RESOURCE_H
#define _LINUX_RESOURCE_H
-#include <linux/time.h>
-#include <linux/types.h>
+#include <uapi/linux/resource.h>
-/*
- * Resource control/accounting header file for linux
- */
-
-/*
- * Definition of struct rusage taken from BSD 4.3 Reno
- *
- * We don't support all of these yet, but we might as well have them....
- * Otherwise, each time we add new items, programs which depend on this
- * structure will lose. This reduces the chances of that happening.
- */
-#define RUSAGE_SELF 0
-#define RUSAGE_CHILDREN (-1)
-#define RUSAGE_BOTH (-2) /* sys_wait4() uses this */
-#define RUSAGE_THREAD 1 /* only the calling thread */
-
-struct rusage {
- struct timeval ru_utime; /* user time used */
- struct timeval ru_stime; /* system time used */
- long ru_maxrss; /* maximum resident set size */
- long ru_ixrss; /* integral shared memory size */
- long ru_idrss; /* integral unshared data size */
- long ru_isrss; /* integral unshared stack size */
- long ru_minflt; /* page reclaims */
- long ru_majflt; /* page faults */
- long ru_nswap; /* swaps */
- long ru_inblock; /* block input operations */
- long ru_oublock; /* block output operations */
- long ru_msgsnd; /* messages sent */
- long ru_msgrcv; /* messages received */
- long ru_nsignals; /* signals received */
- long ru_nvcsw; /* voluntary context switches */
- long ru_nivcsw; /* involuntary " */
-};
-
-struct rlimit {
- unsigned long rlim_cur;
- unsigned long rlim_max;
-};
-
-#define RLIM64_INFINITY (~0ULL)
-
-struct rlimit64 {
- __u64 rlim_cur;
- __u64 rlim_max;
-};
-
-#define PRIO_MIN (-20)
-#define PRIO_MAX 20
-
-#define PRIO_PROCESS 0
-#define PRIO_PGRP 1
-#define PRIO_USER 2
-
-/*
- * Limit the stack by to some sane default: root can always
- * increase this limit if needed.. 8MB seems reasonable.
- */
-#define _STK_LIM (8*1024*1024)
-
-/*
- * GPG2 wants 64kB of mlocked memory, to make sure pass phrases
- * and other sensitive information are never written to disk.
- */
-#define MLOCK_LIMIT ((PAGE_SIZE > 64*1024) ? PAGE_SIZE : 64*1024)
-
-/*
- * Due to binary compatibility, the actual resource numbers
- * may be different for different linux versions..
- */
-#include <asm/resource.h>
-
-#ifdef __KERNEL__
struct task_struct;
@@ -84,6 +10,4 @@
int do_prlimit(struct task_struct *tsk, unsigned int resource,
struct rlimit *new_rlim, struct rlimit *old_rlim);
-#endif /* __KERNEL__ */
-
#endif
diff --git a/include/linux/rfkill.h b/include/linux/rfkill.h
index 0ec590b..d901078 100644
--- a/include/linux/rfkill.h
+++ b/include/linux/rfkill.h
@@ -1,6 +1,3 @@
-#ifndef __RFKILL_H
-#define __RFKILL_H
-
/*
* Copyright (C) 2006 - 2007 Ivo van Doorn
* Copyright (C) 2007 Dmitry Torokhov
@@ -18,92 +15,11 @@
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
+#ifndef __RFKILL_H
+#define __RFKILL_H
-#include <linux/types.h>
+#include <uapi/linux/rfkill.h>
-/* define userspace visible states */
-#define RFKILL_STATE_SOFT_BLOCKED 0
-#define RFKILL_STATE_UNBLOCKED 1
-#define RFKILL_STATE_HARD_BLOCKED 2
-
-/**
- * enum rfkill_type - type of rfkill switch.
- *
- * @RFKILL_TYPE_ALL: toggles all switches (requests only - not a switch type)
- * @RFKILL_TYPE_WLAN: switch is on a 802.11 wireless network device.
- * @RFKILL_TYPE_BLUETOOTH: switch is on a bluetooth device.
- * @RFKILL_TYPE_UWB: switch is on a ultra wideband device.
- * @RFKILL_TYPE_WIMAX: switch is on a WiMAX device.
- * @RFKILL_TYPE_WWAN: switch is on a wireless WAN device.
- * @RFKILL_TYPE_GPS: switch is on a GPS device.
- * @RFKILL_TYPE_FM: switch is on a FM radio device.
- * @NUM_RFKILL_TYPES: number of defined rfkill types
- */
-enum rfkill_type {
- RFKILL_TYPE_ALL = 0,
- RFKILL_TYPE_WLAN,
- RFKILL_TYPE_BLUETOOTH,
- RFKILL_TYPE_UWB,
- RFKILL_TYPE_WIMAX,
- RFKILL_TYPE_WWAN,
- RFKILL_TYPE_GPS,
- RFKILL_TYPE_FM,
- NUM_RFKILL_TYPES,
-};
-
-/**
- * enum rfkill_operation - operation types
- * @RFKILL_OP_ADD: a device was added
- * @RFKILL_OP_DEL: a device was removed
- * @RFKILL_OP_CHANGE: a device's state changed -- userspace changes one device
- * @RFKILL_OP_CHANGE_ALL: userspace changes all devices (of a type, or all)
- */
-enum rfkill_operation {
- RFKILL_OP_ADD = 0,
- RFKILL_OP_DEL,
- RFKILL_OP_CHANGE,
- RFKILL_OP_CHANGE_ALL,
-};
-
-/**
- * struct rfkill_event - events for userspace on /dev/rfkill
- * @idx: index of dev rfkill
- * @type: type of the rfkill struct
- * @op: operation code
- * @hard: hard state (0/1)
- * @soft: soft state (0/1)
- *
- * Structure used for userspace communication on /dev/rfkill,
- * used for events from the kernel and control to the kernel.
- */
-struct rfkill_event {
- __u32 idx;
- __u8 type;
- __u8 op;
- __u8 soft, hard;
-} __attribute__((packed));
-
-/*
- * We are planning to be backward and forward compatible with changes
- * to the event struct, by adding new, optional, members at the end.
- * When reading an event (whether the kernel from userspace or vice
- * versa) we need to accept anything that's at least as large as the
- * version 1 event size, but might be able to accept other sizes in
- * the future.
- *
- * One exception is the kernel -- we already have two event sizes in
- * that we've made the 'hard' member optional since our only option
- * is to ignore it anyway.
- */
-#define RFKILL_EVENT_SIZE_V1 8
-
-/* ioctl for turning off rfkill-input (if present) */
-#define RFKILL_IOC_MAGIC 'R'
-#define RFKILL_IOC_NOINPUT 1
-#define RFKILL_IOCTL_NOINPUT _IO(RFKILL_IOC_MAGIC, RFKILL_IOC_NOINPUT)
-
-/* and that's all userspace gets */
-#ifdef __KERNEL__
/* don't allow anyone to use these in the kernel */
enum rfkill_user_states {
RFKILL_USER_STATE_SOFT_BLOCKED = RFKILL_STATE_SOFT_BLOCKED,
@@ -385,6 +301,4 @@
}
#endif
-#endif /* __KERNEL__ */
-
#endif /* RFKILL_H */
diff --git a/include/linux/rtc.h b/include/linux/rtc.h
index 20ec4d3..9531845c 100644
--- a/include/linux/rtc.h
+++ b/include/linux/rtc.h
@@ -11,102 +11,10 @@
#ifndef _LINUX_RTC_H_
#define _LINUX_RTC_H_
-/*
- * The struct used to pass data via the following ioctl. Similar to the
- * struct tm in <time.h>, but it needs to be here so that the kernel
- * source is self contained, allowing cross-compiles, etc. etc.
- */
-
-struct rtc_time {
- int tm_sec;
- int tm_min;
- int tm_hour;
- int tm_mday;
- int tm_mon;
- int tm_year;
- int tm_wday;
- int tm_yday;
- int tm_isdst;
-};
-
-/*
- * This data structure is inspired by the EFI (v0.92) wakeup
- * alarm API.
- */
-struct rtc_wkalrm {
- unsigned char enabled; /* 0 = alarm disabled, 1 = alarm enabled */
- unsigned char pending; /* 0 = alarm not pending, 1 = alarm pending */
- struct rtc_time time; /* time the alarm is set to */
-};
-
-/*
- * Data structure to control PLL correction some better RTC feature
- * pll_value is used to get or set current value of correction,
- * the rest of the struct is used to query HW capabilities.
- * This is modeled after the RTC used in Q40/Q60 computers but
- * should be sufficiently flexible for other devices
- *
- * +ve pll_value means clock will run faster by
- * pll_value*pll_posmult/pll_clock
- * -ve pll_value means clock will run slower by
- * pll_value*pll_negmult/pll_clock
- */
-
-struct rtc_pll_info {
- int pll_ctrl; /* placeholder for fancier control */
- int pll_value; /* get/set correction value */
- int pll_max; /* max +ve (faster) adjustment value */
- int pll_min; /* max -ve (slower) adjustment value */
- int pll_posmult; /* factor for +ve correction */
- int pll_negmult; /* factor for -ve correction */
- long pll_clock; /* base PLL frequency */
-};
-
-/*
- * ioctl calls that are permitted to the /dev/rtc interface, if
- * any of the RTC drivers are enabled.
- */
-
-#define RTC_AIE_ON _IO('p', 0x01) /* Alarm int. enable on */
-#define RTC_AIE_OFF _IO('p', 0x02) /* ... off */
-#define RTC_UIE_ON _IO('p', 0x03) /* Update int. enable on */
-#define RTC_UIE_OFF _IO('p', 0x04) /* ... off */
-#define RTC_PIE_ON _IO('p', 0x05) /* Periodic int. enable on */
-#define RTC_PIE_OFF _IO('p', 0x06) /* ... off */
-#define RTC_WIE_ON _IO('p', 0x0f) /* Watchdog int. enable on */
-#define RTC_WIE_OFF _IO('p', 0x10) /* ... off */
-
-#define RTC_ALM_SET _IOW('p', 0x07, struct rtc_time) /* Set alarm time */
-#define RTC_ALM_READ _IOR('p', 0x08, struct rtc_time) /* Read alarm time */
-#define RTC_RD_TIME _IOR('p', 0x09, struct rtc_time) /* Read RTC time */
-#define RTC_SET_TIME _IOW('p', 0x0a, struct rtc_time) /* Set RTC time */
-#define RTC_IRQP_READ _IOR('p', 0x0b, unsigned long) /* Read IRQ rate */
-#define RTC_IRQP_SET _IOW('p', 0x0c, unsigned long) /* Set IRQ rate */
-#define RTC_EPOCH_READ _IOR('p', 0x0d, unsigned long) /* Read epoch */
-#define RTC_EPOCH_SET _IOW('p', 0x0e, unsigned long) /* Set epoch */
-
-#define RTC_WKALM_SET _IOW('p', 0x0f, struct rtc_wkalrm)/* Set wakeup alarm*/
-#define RTC_WKALM_RD _IOR('p', 0x10, struct rtc_wkalrm)/* Get wakeup alarm*/
-
-#define RTC_PLL_GET _IOR('p', 0x11, struct rtc_pll_info) /* Get PLL correction */
-#define RTC_PLL_SET _IOW('p', 0x12, struct rtc_pll_info) /* Set PLL correction */
-
-#define RTC_VL_READ _IOR('p', 0x13, int) /* Voltage low detector */
-#define RTC_VL_CLR _IO('p', 0x14) /* Clear voltage low information */
-
-/* interrupt flags */
-#define RTC_IRQF 0x80 /* Any of the following is active */
-#define RTC_PF 0x40 /* Periodic interrupt */
-#define RTC_AF 0x20 /* Alarm interrupt */
-#define RTC_UF 0x10 /* Update interrupt for 1Hz RTC */
-
-
-#define RTC_MAX_FREQ 8192
-
-#ifdef __KERNEL__
#include <linux/types.h>
#include <linux/interrupt.h>
+#include <uapi/linux/rtc.h>
extern int rtc_month_days(unsigned int month, unsigned int year);
extern int rtc_year_days(unsigned int day, unsigned int month, unsigned int year);
@@ -282,6 +190,4 @@
#define rtc_hctosys_ret -ENODEV
#endif
-#endif /* __KERNEL__ */
-
#endif /* _LINUX_RTC_H_ */
diff --git a/include/linux/rtnetlink.h b/include/linux/rtnetlink.h
index db71c4a..7002bbf 100644
--- a/include/linux/rtnetlink.h
+++ b/include/linux/rtnetlink.h
@@ -1,616 +1,10 @@
#ifndef __LINUX_RTNETLINK_H
#define __LINUX_RTNETLINK_H
-#include <linux/types.h>
-#include <linux/netlink.h>
-#include <linux/if_link.h>
-#include <linux/if_addr.h>
-#include <linux/neighbour.h>
-
-/* rtnetlink families. Values up to 127 are reserved for real address
- * families, values above 128 may be used arbitrarily.
- */
-#define RTNL_FAMILY_IPMR 128
-#define RTNL_FAMILY_IP6MR 129
-#define RTNL_FAMILY_MAX 129
-
-/****
- * Routing/neighbour discovery messages.
- ****/
-
-/* Types of messages */
-
-enum {
- RTM_BASE = 16,
-#define RTM_BASE RTM_BASE
-
- RTM_NEWLINK = 16,
-#define RTM_NEWLINK RTM_NEWLINK
- RTM_DELLINK,
-#define RTM_DELLINK RTM_DELLINK
- RTM_GETLINK,
-#define RTM_GETLINK RTM_GETLINK
- RTM_SETLINK,
-#define RTM_SETLINK RTM_SETLINK
-
- RTM_NEWADDR = 20,
-#define RTM_NEWADDR RTM_NEWADDR
- RTM_DELADDR,
-#define RTM_DELADDR RTM_DELADDR
- RTM_GETADDR,
-#define RTM_GETADDR RTM_GETADDR
-
- RTM_NEWROUTE = 24,
-#define RTM_NEWROUTE RTM_NEWROUTE
- RTM_DELROUTE,
-#define RTM_DELROUTE RTM_DELROUTE
- RTM_GETROUTE,
-#define RTM_GETROUTE RTM_GETROUTE
-
- RTM_NEWNEIGH = 28,
-#define RTM_NEWNEIGH RTM_NEWNEIGH
- RTM_DELNEIGH,
-#define RTM_DELNEIGH RTM_DELNEIGH
- RTM_GETNEIGH,
-#define RTM_GETNEIGH RTM_GETNEIGH
-
- RTM_NEWRULE = 32,
-#define RTM_NEWRULE RTM_NEWRULE
- RTM_DELRULE,
-#define RTM_DELRULE RTM_DELRULE
- RTM_GETRULE,
-#define RTM_GETRULE RTM_GETRULE
-
- RTM_NEWQDISC = 36,
-#define RTM_NEWQDISC RTM_NEWQDISC
- RTM_DELQDISC,
-#define RTM_DELQDISC RTM_DELQDISC
- RTM_GETQDISC,
-#define RTM_GETQDISC RTM_GETQDISC
-
- RTM_NEWTCLASS = 40,
-#define RTM_NEWTCLASS RTM_NEWTCLASS
- RTM_DELTCLASS,
-#define RTM_DELTCLASS RTM_DELTCLASS
- RTM_GETTCLASS,
-#define RTM_GETTCLASS RTM_GETTCLASS
-
- RTM_NEWTFILTER = 44,
-#define RTM_NEWTFILTER RTM_NEWTFILTER
- RTM_DELTFILTER,
-#define RTM_DELTFILTER RTM_DELTFILTER
- RTM_GETTFILTER,
-#define RTM_GETTFILTER RTM_GETTFILTER
-
- RTM_NEWACTION = 48,
-#define RTM_NEWACTION RTM_NEWACTION
- RTM_DELACTION,
-#define RTM_DELACTION RTM_DELACTION
- RTM_GETACTION,
-#define RTM_GETACTION RTM_GETACTION
-
- RTM_NEWPREFIX = 52,
-#define RTM_NEWPREFIX RTM_NEWPREFIX
-
- RTM_GETMULTICAST = 58,
-#define RTM_GETMULTICAST RTM_GETMULTICAST
-
- RTM_GETANYCAST = 62,
-#define RTM_GETANYCAST RTM_GETANYCAST
-
- RTM_NEWNEIGHTBL = 64,
-#define RTM_NEWNEIGHTBL RTM_NEWNEIGHTBL
- RTM_GETNEIGHTBL = 66,
-#define RTM_GETNEIGHTBL RTM_GETNEIGHTBL
- RTM_SETNEIGHTBL,
-#define RTM_SETNEIGHTBL RTM_SETNEIGHTBL
-
- RTM_NEWNDUSEROPT = 68,
-#define RTM_NEWNDUSEROPT RTM_NEWNDUSEROPT
-
- RTM_NEWADDRLABEL = 72,
-#define RTM_NEWADDRLABEL RTM_NEWADDRLABEL
- RTM_DELADDRLABEL,
-#define RTM_DELADDRLABEL RTM_DELADDRLABEL
- RTM_GETADDRLABEL,
-#define RTM_GETADDRLABEL RTM_GETADDRLABEL
-
- RTM_GETDCB = 78,
-#define RTM_GETDCB RTM_GETDCB
- RTM_SETDCB,
-#define RTM_SETDCB RTM_SETDCB
-
- __RTM_MAX,
-#define RTM_MAX (((__RTM_MAX + 3) & ~3) - 1)
-};
-
-#define RTM_NR_MSGTYPES (RTM_MAX + 1 - RTM_BASE)
-#define RTM_NR_FAMILIES (RTM_NR_MSGTYPES >> 2)
-#define RTM_FAM(cmd) (((cmd) - RTM_BASE) >> 2)
-
-/*
- Generic structure for encapsulation of optional route information.
- It is reminiscent of sockaddr, but with sa_family replaced
- with attribute type.
- */
-
-struct rtattr {
- unsigned short rta_len;
- unsigned short rta_type;
-};
-
-/* Macros to handle rtattributes */
-
-#define RTA_ALIGNTO 4
-#define RTA_ALIGN(len) ( ((len)+RTA_ALIGNTO-1) & ~(RTA_ALIGNTO-1) )
-#define RTA_OK(rta,len) ((len) >= (int)sizeof(struct rtattr) && \
- (rta)->rta_len >= sizeof(struct rtattr) && \
- (rta)->rta_len <= (len))
-#define RTA_NEXT(rta,attrlen) ((attrlen) -= RTA_ALIGN((rta)->rta_len), \
- (struct rtattr*)(((char*)(rta)) + RTA_ALIGN((rta)->rta_len)))
-#define RTA_LENGTH(len) (RTA_ALIGN(sizeof(struct rtattr)) + (len))
-#define RTA_SPACE(len) RTA_ALIGN(RTA_LENGTH(len))
-#define RTA_DATA(rta) ((void*)(((char*)(rta)) + RTA_LENGTH(0)))
-#define RTA_PAYLOAD(rta) ((int)((rta)->rta_len) - RTA_LENGTH(0))
-
-
-
-
-/******************************************************************************
- * Definitions used in routing table administration.
- ****/
-
-struct rtmsg {
- unsigned char rtm_family;
- unsigned char rtm_dst_len;
- unsigned char rtm_src_len;
- unsigned char rtm_tos;
-
- unsigned char rtm_table; /* Routing table id */
- unsigned char rtm_protocol; /* Routing protocol; see below */
- unsigned char rtm_scope; /* See below */
- unsigned char rtm_type; /* See below */
-
- unsigned rtm_flags;
-};
-
-/* rtm_type */
-
-enum {
- RTN_UNSPEC,
- RTN_UNICAST, /* Gateway or direct route */
- RTN_LOCAL, /* Accept locally */
- RTN_BROADCAST, /* Accept locally as broadcast,
- send as broadcast */
- RTN_ANYCAST, /* Accept locally as broadcast,
- but send as unicast */
- RTN_MULTICAST, /* Multicast route */
- RTN_BLACKHOLE, /* Drop */
- RTN_UNREACHABLE, /* Destination is unreachable */
- RTN_PROHIBIT, /* Administratively prohibited */
- RTN_THROW, /* Not in this table */
- RTN_NAT, /* Translate this address */
- RTN_XRESOLVE, /* Use external resolver */
- __RTN_MAX
-};
-
-#define RTN_MAX (__RTN_MAX - 1)
-
-
-/* rtm_protocol */
-
-#define RTPROT_UNSPEC 0
-#define RTPROT_REDIRECT 1 /* Route installed by ICMP redirects;
- not used by current IPv4 */
-#define RTPROT_KERNEL 2 /* Route installed by kernel */
-#define RTPROT_BOOT 3 /* Route installed during boot */
-#define RTPROT_STATIC 4 /* Route installed by administrator */
-
-/* Values of protocol >= RTPROT_STATIC are not interpreted by kernel;
- they are just passed from user and back as is.
- It will be used by hypothetical multiple routing daemons.
- Note that protocol values should be standardized in order to
- avoid conflicts.
- */
-
-#define RTPROT_GATED 8 /* Apparently, GateD */
-#define RTPROT_RA 9 /* RDISC/ND router advertisements */
-#define RTPROT_MRT 10 /* Merit MRT */
-#define RTPROT_ZEBRA 11 /* Zebra */
-#define RTPROT_BIRD 12 /* BIRD */
-#define RTPROT_DNROUTED 13 /* DECnet routing daemon */
-#define RTPROT_XORP 14 /* XORP */
-#define RTPROT_NTK 15 /* Netsukuku */
-#define RTPROT_DHCP 16 /* DHCP client */
-
-/* rtm_scope
-
- Really it is not scope, but sort of distance to the destination.
- NOWHERE are reserved for not existing destinations, HOST is our
- local addresses, LINK are destinations, located on directly attached
- link and UNIVERSE is everywhere in the Universe.
-
- Intermediate values are also possible f.e. interior routes
- could be assigned a value between UNIVERSE and LINK.
-*/
-
-enum rt_scope_t {
- RT_SCOPE_UNIVERSE=0,
-/* User defined values */
- RT_SCOPE_SITE=200,
- RT_SCOPE_LINK=253,
- RT_SCOPE_HOST=254,
- RT_SCOPE_NOWHERE=255
-};
-
-/* rtm_flags */
-
-#define RTM_F_NOTIFY 0x100 /* Notify user of route change */
-#define RTM_F_CLONED 0x200 /* This route is cloned */
-#define RTM_F_EQUALIZE 0x400 /* Multipath equalizer: NI */
-#define RTM_F_PREFIX 0x800 /* Prefix addresses */
-
-/* Reserved table identifiers */
-
-enum rt_class_t {
- RT_TABLE_UNSPEC=0,
-/* User defined values */
- RT_TABLE_COMPAT=252,
- RT_TABLE_DEFAULT=253,
- RT_TABLE_MAIN=254,
- RT_TABLE_LOCAL=255,
- RT_TABLE_MAX=0xFFFFFFFF
-};
-
-
-/* Routing message attributes */
-
-enum rtattr_type_t {
- RTA_UNSPEC,
- RTA_DST,
- RTA_SRC,
- RTA_IIF,
- RTA_OIF,
- RTA_GATEWAY,
- RTA_PRIORITY,
- RTA_PREFSRC,
- RTA_METRICS,
- RTA_MULTIPATH,
- RTA_PROTOINFO, /* no longer used */
- RTA_FLOW,
- RTA_CACHEINFO,
- RTA_SESSION, /* no longer used */
- RTA_MP_ALGO, /* no longer used */
- RTA_TABLE,
- RTA_MARK,
- __RTA_MAX
-};
-
-#define RTA_MAX (__RTA_MAX - 1)
-
-#define RTM_RTA(r) ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct rtmsg))))
-#define RTM_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct rtmsg))
-
-/* RTM_MULTIPATH --- array of struct rtnexthop.
- *
- * "struct rtnexthop" describes all necessary nexthop information,
- * i.e. parameters of path to a destination via this nexthop.
- *
- * At the moment it is impossible to set different prefsrc, mtu, window
- * and rtt for different paths from multipath.
- */
-
-struct rtnexthop {
- unsigned short rtnh_len;
- unsigned char rtnh_flags;
- unsigned char rtnh_hops;
- int rtnh_ifindex;
-};
-
-/* rtnh_flags */
-
-#define RTNH_F_DEAD 1 /* Nexthop is dead (used by multipath) */
-#define RTNH_F_PERVASIVE 2 /* Do recursive gateway lookup */
-#define RTNH_F_ONLINK 4 /* Gateway is forced on link */
-
-/* Macros to handle hexthops */
-
-#define RTNH_ALIGNTO 4
-#define RTNH_ALIGN(len) ( ((len)+RTNH_ALIGNTO-1) & ~(RTNH_ALIGNTO-1) )
-#define RTNH_OK(rtnh,len) ((rtnh)->rtnh_len >= sizeof(struct rtnexthop) && \
- ((int)(rtnh)->rtnh_len) <= (len))
-#define RTNH_NEXT(rtnh) ((struct rtnexthop*)(((char*)(rtnh)) + RTNH_ALIGN((rtnh)->rtnh_len)))
-#define RTNH_LENGTH(len) (RTNH_ALIGN(sizeof(struct rtnexthop)) + (len))
-#define RTNH_SPACE(len) RTNH_ALIGN(RTNH_LENGTH(len))
-#define RTNH_DATA(rtnh) ((struct rtattr*)(((char*)(rtnh)) + RTNH_LENGTH(0)))
-
-/* RTM_CACHEINFO */
-
-struct rta_cacheinfo {
- __u32 rta_clntref;
- __u32 rta_lastuse;
- __s32 rta_expires;
- __u32 rta_error;
- __u32 rta_used;
-
-#define RTNETLINK_HAVE_PEERINFO 1
- __u32 rta_id;
- __u32 rta_ts;
- __u32 rta_tsage;
-};
-
-/* RTM_METRICS --- array of struct rtattr with types of RTAX_* */
-
-enum {
- RTAX_UNSPEC,
-#define RTAX_UNSPEC RTAX_UNSPEC
- RTAX_LOCK,
-#define RTAX_LOCK RTAX_LOCK
- RTAX_MTU,
-#define RTAX_MTU RTAX_MTU
- RTAX_WINDOW,
-#define RTAX_WINDOW RTAX_WINDOW
- RTAX_RTT,
-#define RTAX_RTT RTAX_RTT
- RTAX_RTTVAR,
-#define RTAX_RTTVAR RTAX_RTTVAR
- RTAX_SSTHRESH,
-#define RTAX_SSTHRESH RTAX_SSTHRESH
- RTAX_CWND,
-#define RTAX_CWND RTAX_CWND
- RTAX_ADVMSS,
-#define RTAX_ADVMSS RTAX_ADVMSS
- RTAX_REORDERING,
-#define RTAX_REORDERING RTAX_REORDERING
- RTAX_HOPLIMIT,
-#define RTAX_HOPLIMIT RTAX_HOPLIMIT
- RTAX_INITCWND,
-#define RTAX_INITCWND RTAX_INITCWND
- RTAX_FEATURES,
-#define RTAX_FEATURES RTAX_FEATURES
- RTAX_RTO_MIN,
-#define RTAX_RTO_MIN RTAX_RTO_MIN
- RTAX_INITRWND,
-#define RTAX_INITRWND RTAX_INITRWND
- __RTAX_MAX
-};
-
-#define RTAX_MAX (__RTAX_MAX - 1)
-
-#define RTAX_FEATURE_ECN 0x00000001
-#define RTAX_FEATURE_SACK 0x00000002
-#define RTAX_FEATURE_TIMESTAMP 0x00000004
-#define RTAX_FEATURE_ALLFRAG 0x00000008
-
-struct rta_session {
- __u8 proto;
- __u8 pad1;
- __u16 pad2;
-
- union {
- struct {
- __u16 sport;
- __u16 dport;
- } ports;
-
- struct {
- __u8 type;
- __u8 code;
- __u16 ident;
- } icmpt;
-
- __u32 spi;
- } u;
-};
-
-/****
- * General form of address family dependent message.
- ****/
-
-struct rtgenmsg {
- unsigned char rtgen_family;
-};
-
-/*****************************************************************
- * Link layer specific messages.
- ****/
-
-/* struct ifinfomsg
- * passes link level specific information, not dependent
- * on network protocol.
- */
-
-struct ifinfomsg {
- unsigned char ifi_family;
- unsigned char __ifi_pad;
- unsigned short ifi_type; /* ARPHRD_* */
- int ifi_index; /* Link index */
- unsigned ifi_flags; /* IFF_* flags */
- unsigned ifi_change; /* IFF_* change mask */
-};
-
-/********************************************************************
- * prefix information
- ****/
-
-struct prefixmsg {
- unsigned char prefix_family;
- unsigned char prefix_pad1;
- unsigned short prefix_pad2;
- int prefix_ifindex;
- unsigned char prefix_type;
- unsigned char prefix_len;
- unsigned char prefix_flags;
- unsigned char prefix_pad3;
-};
-
-enum
-{
- PREFIX_UNSPEC,
- PREFIX_ADDRESS,
- PREFIX_CACHEINFO,
- __PREFIX_MAX
-};
-
-#define PREFIX_MAX (__PREFIX_MAX - 1)
-
-struct prefix_cacheinfo {
- __u32 preferred_time;
- __u32 valid_time;
-};
-
-
-/*****************************************************************
- * Traffic control messages.
- ****/
-
-struct tcmsg {
- unsigned char tcm_family;
- unsigned char tcm__pad1;
- unsigned short tcm__pad2;
- int tcm_ifindex;
- __u32 tcm_handle;
- __u32 tcm_parent;
- __u32 tcm_info;
-};
-
-enum {
- TCA_UNSPEC,
- TCA_KIND,
- TCA_OPTIONS,
- TCA_STATS,
- TCA_XSTATS,
- TCA_RATE,
- TCA_FCNT,
- TCA_STATS2,
- TCA_STAB,
- __TCA_MAX
-};
-
-#define TCA_MAX (__TCA_MAX - 1)
-
-#define TCA_RTA(r) ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct tcmsg))))
-#define TCA_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct tcmsg))
-
-/********************************************************************
- * Neighbor Discovery userland options
- ****/
-
-struct nduseroptmsg {
- unsigned char nduseropt_family;
- unsigned char nduseropt_pad1;
- unsigned short nduseropt_opts_len; /* Total length of options */
- int nduseropt_ifindex;
- __u8 nduseropt_icmp_type;
- __u8 nduseropt_icmp_code;
- unsigned short nduseropt_pad2;
- unsigned int nduseropt_pad3;
- /* Followed by one or more ND options */
-};
-
-enum {
- NDUSEROPT_UNSPEC,
- NDUSEROPT_SRCADDR,
- __NDUSEROPT_MAX
-};
-
-#define NDUSEROPT_MAX (__NDUSEROPT_MAX - 1)
-
-#ifndef __KERNEL__
-/* RTnetlink multicast groups - backwards compatibility for userspace */
-#define RTMGRP_LINK 1
-#define RTMGRP_NOTIFY 2
-#define RTMGRP_NEIGH 4
-#define RTMGRP_TC 8
-
-#define RTMGRP_IPV4_IFADDR 0x10
-#define RTMGRP_IPV4_MROUTE 0x20
-#define RTMGRP_IPV4_ROUTE 0x40
-#define RTMGRP_IPV4_RULE 0x80
-
-#define RTMGRP_IPV6_IFADDR 0x100
-#define RTMGRP_IPV6_MROUTE 0x200
-#define RTMGRP_IPV6_ROUTE 0x400
-#define RTMGRP_IPV6_IFINFO 0x800
-
-#define RTMGRP_DECnet_IFADDR 0x1000
-#define RTMGRP_DECnet_ROUTE 0x4000
-
-#define RTMGRP_IPV6_PREFIX 0x20000
-#endif
-
-/* RTnetlink multicast groups */
-enum rtnetlink_groups {
- RTNLGRP_NONE,
-#define RTNLGRP_NONE RTNLGRP_NONE
- RTNLGRP_LINK,
-#define RTNLGRP_LINK RTNLGRP_LINK
- RTNLGRP_NOTIFY,
-#define RTNLGRP_NOTIFY RTNLGRP_NOTIFY
- RTNLGRP_NEIGH,
-#define RTNLGRP_NEIGH RTNLGRP_NEIGH
- RTNLGRP_TC,
-#define RTNLGRP_TC RTNLGRP_TC
- RTNLGRP_IPV4_IFADDR,
-#define RTNLGRP_IPV4_IFADDR RTNLGRP_IPV4_IFADDR
- RTNLGRP_IPV4_MROUTE,
-#define RTNLGRP_IPV4_MROUTE RTNLGRP_IPV4_MROUTE
- RTNLGRP_IPV4_ROUTE,
-#define RTNLGRP_IPV4_ROUTE RTNLGRP_IPV4_ROUTE
- RTNLGRP_IPV4_RULE,
-#define RTNLGRP_IPV4_RULE RTNLGRP_IPV4_RULE
- RTNLGRP_IPV6_IFADDR,
-#define RTNLGRP_IPV6_IFADDR RTNLGRP_IPV6_IFADDR
- RTNLGRP_IPV6_MROUTE,
-#define RTNLGRP_IPV6_MROUTE RTNLGRP_IPV6_MROUTE
- RTNLGRP_IPV6_ROUTE,
-#define RTNLGRP_IPV6_ROUTE RTNLGRP_IPV6_ROUTE
- RTNLGRP_IPV6_IFINFO,
-#define RTNLGRP_IPV6_IFINFO RTNLGRP_IPV6_IFINFO
- RTNLGRP_DECnet_IFADDR,
-#define RTNLGRP_DECnet_IFADDR RTNLGRP_DECnet_IFADDR
- RTNLGRP_NOP2,
- RTNLGRP_DECnet_ROUTE,
-#define RTNLGRP_DECnet_ROUTE RTNLGRP_DECnet_ROUTE
- RTNLGRP_DECnet_RULE,
-#define RTNLGRP_DECnet_RULE RTNLGRP_DECnet_RULE
- RTNLGRP_NOP4,
- RTNLGRP_IPV6_PREFIX,
-#define RTNLGRP_IPV6_PREFIX RTNLGRP_IPV6_PREFIX
- RTNLGRP_IPV6_RULE,
-#define RTNLGRP_IPV6_RULE RTNLGRP_IPV6_RULE
- RTNLGRP_ND_USEROPT,
-#define RTNLGRP_ND_USEROPT RTNLGRP_ND_USEROPT
- RTNLGRP_PHONET_IFADDR,
-#define RTNLGRP_PHONET_IFADDR RTNLGRP_PHONET_IFADDR
- RTNLGRP_PHONET_ROUTE,
-#define RTNLGRP_PHONET_ROUTE RTNLGRP_PHONET_ROUTE
- RTNLGRP_DCB,
-#define RTNLGRP_DCB RTNLGRP_DCB
- __RTNLGRP_MAX
-};
-#define RTNLGRP_MAX (__RTNLGRP_MAX - 1)
-
-/* TC action piece */
-struct tcamsg {
- unsigned char tca_family;
- unsigned char tca__pad1;
- unsigned short tca__pad2;
-};
-#define TA_RTA(r) ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct tcamsg))))
-#define TA_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct tcamsg))
-#define TCA_ACT_TAB 1 /* attr type must be >=1 */
-#define TCAA_MAX 1
-
-/* New extended info filters for IFLA_EXT_MASK */
-#define RTEXT_FILTER_VF (1 << 0)
-
-/* End of information exported to user level */
-
-#ifdef __KERNEL__
#include <linux/mutex.h>
#include <linux/netdevice.h>
+#include <uapi/linux/rtnetlink.h>
extern int rtnetlink_send(struct sk_buff *skb, struct net *net, u32 pid, u32 group, int echo);
extern int rtnl_unicast(struct sk_buff *skb, struct net *net, u32 pid);
@@ -675,7 +69,4 @@
struct netlink_callback *cb,
struct net_device *dev,
int idx);
-#endif /* __KERNEL__ */
-
-
#endif /* __LINUX_RTNETLINK_H */
diff --git a/include/linux/scc.h b/include/linux/scc.h
index 3495bd9..c5a0049 100644
--- a/include/linux/scc.h
+++ b/include/linux/scc.h
@@ -1,175 +1,9 @@
/* $Id: scc.h,v 1.29 1997/04/02 14:56:45 jreuter Exp jreuter $ */
-
#ifndef _SCC_H
#define _SCC_H
+#include <uapi/linux/scc.h>
-/* selection of hardware types */
-
-#define PA0HZP 0x00 /* hardware type for PA0HZP SCC card and compatible */
-#define EAGLE 0x01 /* hardware type for EAGLE card */
-#define PC100 0x02 /* hardware type for PC100 card */
-#define PRIMUS 0x04 /* hardware type for PRIMUS-PC (DG9BL) card */
-#define DRSI 0x08 /* hardware type for DRSI PC*Packet card */
-#define BAYCOM 0x10 /* hardware type for BayCom (U)SCC */
-
-/* DEV ioctl() commands */
-
-enum SCC_ioctl_cmds {
- SIOCSCCRESERVED = SIOCDEVPRIVATE,
- SIOCSCCCFG,
- SIOCSCCINI,
- SIOCSCCCHANINI,
- SIOCSCCSMEM,
- SIOCSCCGKISS,
- SIOCSCCSKISS,
- SIOCSCCGSTAT,
- SIOCSCCCAL
-};
-
-/* Device parameter control (from WAMPES) */
-
-enum L1_params {
- PARAM_DATA,
- PARAM_TXDELAY,
- PARAM_PERSIST,
- PARAM_SLOTTIME,
- PARAM_TXTAIL,
- PARAM_FULLDUP,
- PARAM_SOFTDCD, /* was: PARAM_HW */
- PARAM_MUTE, /* ??? */
- PARAM_DTR,
- PARAM_RTS,
- PARAM_SPEED,
- PARAM_ENDDELAY, /* ??? */
- PARAM_GROUP,
- PARAM_IDLE,
- PARAM_MIN,
- PARAM_MAXKEY,
- PARAM_WAIT,
- PARAM_MAXDEFER,
- PARAM_TX,
- PARAM_HWEVENT = 31,
- PARAM_RETURN = 255 /* reset kiss mode */
-};
-
-/* fulldup parameter */
-
-enum FULLDUP_modes {
- KISS_DUPLEX_HALF, /* normal CSMA operation */
- KISS_DUPLEX_FULL, /* fullduplex, key down trx after transmission */
- KISS_DUPLEX_LINK, /* fullduplex, key down trx after 'idletime' sec */
- KISS_DUPLEX_OPTIMA /* fullduplex, let the protocol layer control the hw */
-};
-
-/* misc. parameters */
-
-#define TIMER_OFF 65535U /* to switch off timers */
-#define NO_SUCH_PARAM 65534U /* param not implemented */
-
-/* HWEVENT parameter */
-
-enum HWEVENT_opts {
- HWEV_DCD_ON,
- HWEV_DCD_OFF,
- HWEV_ALL_SENT
-};
-
-/* channel grouping */
-
-#define RXGROUP 0100 /* if set, only tx when all channels clear */
-#define TXGROUP 0200 /* if set, don't transmit simultaneously */
-
-/* Tx/Rx clock sources */
-
-enum CLOCK_sources {
- CLK_DPLL, /* normal halfduplex operation */
- CLK_EXTERNAL, /* external clocking (G3RUH/DF9IC modems) */
- CLK_DIVIDER, /* Rx = DPLL, Tx = divider (fullduplex with */
- /* modems without clock regeneration */
- CLK_BRG /* experimental fullduplex mode with DPLL/BRG for */
- /* MODEMs without clock recovery */
-};
-
-/* Tx state */
-
-enum TX_state {
- TXS_IDLE, /* Transmitter off, no data pending */
- TXS_BUSY, /* waiting for permission to send / tailtime */
- TXS_ACTIVE, /* Transmitter on, sending data */
- TXS_NEWFRAME, /* reset CRC and send (next) frame */
- TXS_IDLE2, /* Transmitter on, no data pending */
- TXS_WAIT, /* Waiting for Mintime to expire */
- TXS_TIMEOUT /* We had a transmission timeout */
-};
-
-typedef unsigned long io_port; /* type definition for an 'io port address' */
-
-/* SCC statistical information */
-
-struct scc_stat {
- long rxints; /* Receiver interrupts */
- long txints; /* Transmitter interrupts */
- long exints; /* External/status interrupts */
- long spints; /* Special receiver interrupts */
-
- long txframes; /* Packets sent */
- long rxframes; /* Number of Frames Actually Received */
- long rxerrs; /* CRC Errors */
- long txerrs; /* KISS errors */
-
- unsigned int nospace; /* "Out of buffers" */
- unsigned int rx_over; /* Receiver Overruns */
- unsigned int tx_under; /* Transmitter Underruns */
-
- unsigned int tx_state; /* Transmitter state */
- int tx_queued; /* tx frames enqueued */
-
- unsigned int maxqueue; /* allocated tx_buffers */
- unsigned int bufsize; /* used buffersize */
-};
-
-struct scc_modem {
- long speed; /* Line speed, bps */
- char clocksrc; /* 0 = DPLL, 1 = external, 2 = divider */
- char nrz; /* NRZ instead of NRZI */
-};
-
-struct scc_kiss_cmd {
- int command; /* one of the KISS-Commands defined above */
- unsigned param; /* KISS-Param */
-};
-
-struct scc_hw_config {
- io_port data_a; /* data port channel A */
- io_port ctrl_a; /* control port channel A */
- io_port data_b; /* data port channel B */
- io_port ctrl_b; /* control port channel B */
- io_port vector_latch; /* INTACK-Latch (#) */
- io_port special; /* special function port */
-
- int irq; /* irq */
- long clock; /* clock */
- char option; /* command for function port */
-
- char brand; /* hardware type */
- char escc; /* use ext. features of a 8580/85180/85280 */
-};
-
-/* (#) only one INTACK latch allowed. */
-
-
-struct scc_mem_config {
- unsigned int dummy;
- unsigned int bufsize;
-};
-
-struct scc_calibrate {
- unsigned int time;
- unsigned char pattern;
-};
-
-#ifdef __KERNEL__
enum {TX_OFF, TX_ON}; /* command for scc_key_trx() */
@@ -248,5 +82,4 @@
spinlock_t lock; /* Channel guard lock */
};
-#endif /* defined(__KERNEL__) */
#endif /* defined(_SCC_H) */
diff --git a/include/linux/sched.h b/include/linux/sched.h
index a83ca58..0dd42a0 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -1,48 +1,8 @@
#ifndef _LINUX_SCHED_H
#define _LINUX_SCHED_H
-/*
- * cloning flags:
- */
-#define CSIGNAL 0x000000ff /* signal mask to be sent at exit */
-#define CLONE_VM 0x00000100 /* set if VM shared between processes */
-#define CLONE_FS 0x00000200 /* set if fs info shared between processes */
-#define CLONE_FILES 0x00000400 /* set if open files shared between processes */
-#define CLONE_SIGHAND 0x00000800 /* set if signal handlers and blocked signals shared */
-#define CLONE_PTRACE 0x00002000 /* set if we want to let tracing continue on the child too */
-#define CLONE_VFORK 0x00004000 /* set if the parent wants the child to wake it up on mm_release */
-#define CLONE_PARENT 0x00008000 /* set if we want to have the same parent as the cloner */
-#define CLONE_THREAD 0x00010000 /* Same thread group? */
-#define CLONE_NEWNS 0x00020000 /* New namespace group? */
-#define CLONE_SYSVSEM 0x00040000 /* share system V SEM_UNDO semantics */
-#define CLONE_SETTLS 0x00080000 /* create a new TLS for the child */
-#define CLONE_PARENT_SETTID 0x00100000 /* set the TID in the parent */
-#define CLONE_CHILD_CLEARTID 0x00200000 /* clear the TID in the child */
-#define CLONE_DETACHED 0x00400000 /* Unused, ignored */
-#define CLONE_UNTRACED 0x00800000 /* set if the tracing process can't force CLONE_PTRACE on this clone */
-#define CLONE_CHILD_SETTID 0x01000000 /* set the TID in the child */
-/* 0x02000000 was previously the unused CLONE_STOPPED (Start in stopped state)
- and is now available for re-use. */
-#define CLONE_NEWUTS 0x04000000 /* New utsname group? */
-#define CLONE_NEWIPC 0x08000000 /* New ipcs */
-#define CLONE_NEWUSER 0x10000000 /* New user namespace */
-#define CLONE_NEWPID 0x20000000 /* New pid namespace */
-#define CLONE_NEWNET 0x40000000 /* New network namespace */
-#define CLONE_IO 0x80000000 /* Clone io context */
+#include <uapi/linux/sched.h>
-/*
- * Scheduling policies
- */
-#define SCHED_NORMAL 0
-#define SCHED_FIFO 1
-#define SCHED_RR 2
-#define SCHED_BATCH 3
-/* SCHED_ISO: reserved but not implemented yet */
-#define SCHED_IDLE 5
-/* Can be ORed in to make sure the process is reverted back to SCHED_NORMAL on fork */
-#define SCHED_RESET_ON_FORK 0x40000000
-
-#ifdef __KERNEL__
struct sched_param {
int sched_priority;
@@ -2828,6 +2788,4 @@
return task_rlimit_max(current, limit);
}
-#endif /* __KERNEL__ */
-
#endif
diff --git a/include/linux/screen_info.h b/include/linux/screen_info.h
index fb3c5a8..005bf3e 100644
--- a/include/linux/screen_info.h
+++ b/include/linux/screen_info.h
@@ -1,76 +1,8 @@
#ifndef _SCREEN_INFO_H
#define _SCREEN_INFO_H
-#include <linux/types.h>
+#include <uapi/linux/screen_info.h>
-/*
- * These are set up by the setup-routine at boot-time:
- */
-
-struct screen_info {
- __u8 orig_x; /* 0x00 */
- __u8 orig_y; /* 0x01 */
- __u16 ext_mem_k; /* 0x02 */
- __u16 orig_video_page; /* 0x04 */
- __u8 orig_video_mode; /* 0x06 */
- __u8 orig_video_cols; /* 0x07 */
- __u8 flags; /* 0x08 */
- __u8 unused2; /* 0x09 */
- __u16 orig_video_ega_bx;/* 0x0a */
- __u16 unused3; /* 0x0c */
- __u8 orig_video_lines; /* 0x0e */
- __u8 orig_video_isVGA; /* 0x0f */
- __u16 orig_video_points;/* 0x10 */
-
- /* VESA graphic mode -- linear frame buffer */
- __u16 lfb_width; /* 0x12 */
- __u16 lfb_height; /* 0x14 */
- __u16 lfb_depth; /* 0x16 */
- __u32 lfb_base; /* 0x18 */
- __u32 lfb_size; /* 0x1c */
- __u16 cl_magic, cl_offset; /* 0x20 */
- __u16 lfb_linelength; /* 0x24 */
- __u8 red_size; /* 0x26 */
- __u8 red_pos; /* 0x27 */
- __u8 green_size; /* 0x28 */
- __u8 green_pos; /* 0x29 */
- __u8 blue_size; /* 0x2a */
- __u8 blue_pos; /* 0x2b */
- __u8 rsvd_size; /* 0x2c */
- __u8 rsvd_pos; /* 0x2d */
- __u16 vesapm_seg; /* 0x2e */
- __u16 vesapm_off; /* 0x30 */
- __u16 pages; /* 0x32 */
- __u16 vesa_attributes; /* 0x34 */
- __u32 capabilities; /* 0x36 */
- __u8 _reserved[6]; /* 0x3a */
-} __attribute__((packed));
-
-#define VIDEO_TYPE_MDA 0x10 /* Monochrome Text Display */
-#define VIDEO_TYPE_CGA 0x11 /* CGA Display */
-#define VIDEO_TYPE_EGAM 0x20 /* EGA/VGA in Monochrome Mode */
-#define VIDEO_TYPE_EGAC 0x21 /* EGA in Color Mode */
-#define VIDEO_TYPE_VGAC 0x22 /* VGA+ in Color Mode */
-#define VIDEO_TYPE_VLFB 0x23 /* VESA VGA in graphic mode */
-
-#define VIDEO_TYPE_PICA_S3 0x30 /* ACER PICA-61 local S3 video */
-#define VIDEO_TYPE_MIPS_G364 0x31 /* MIPS Magnum 4000 G364 video */
-#define VIDEO_TYPE_SGI 0x33 /* Various SGI graphics hardware */
-
-#define VIDEO_TYPE_TGAC 0x40 /* DEC TGA */
-
-#define VIDEO_TYPE_SUN 0x50 /* Sun frame buffer. */
-#define VIDEO_TYPE_SUNPCI 0x51 /* Sun PCI based frame buffer. */
-
-#define VIDEO_TYPE_PMAC 0x60 /* PowerMacintosh frame buffer. */
-
-#define VIDEO_TYPE_EFI 0x70 /* EFI graphic mode */
-
-#define VIDEO_FLAGS_NOCURSOR (1 << 0) /* The video mode has no cursor set */
-
-#define VIDEO_CAPABILITY_SKIP_QUIRKS (1 << 0)
-
-#ifdef __KERNEL__
extern struct screen_info screen_info;
#define ORIG_X (screen_info.orig_x)
@@ -81,6 +13,4 @@
#define ORIG_VIDEO_LINES (screen_info.orig_video_lines)
#define ORIG_VIDEO_ISVGA (screen_info.orig_video_isVGA)
#define ORIG_VIDEO_POINTS (screen_info.orig_video_points)
-#endif /* __KERNEL__ */
-
#endif /* _SCREEN_INFO_H */
diff --git a/include/linux/sdla.h b/include/linux/sdla.h
index 9995c7f..fe7a967 100644
--- a/include/linux/sdla.h
+++ b/include/linux/sdla.h
@@ -19,100 +19,11 @@
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
-
#ifndef SDLA_H
#define SDLA_H
-/* adapter type */
-#define SDLA_TYPES
-#define SDLA_S502A 5020
-#define SDLA_S502E 5021
-#define SDLA_S503 5030
-#define SDLA_S507 5070
-#define SDLA_S508 5080
-#define SDLA_S509 5090
-#define SDLA_UNKNOWN -1
+#include <uapi/linux/sdla.h>
-/* port selection flags for the S508 */
-#define SDLA_S508_PORT_V35 0x00
-#define SDLA_S508_PORT_RS232 0x02
-
-/* Z80 CPU speeds */
-#define SDLA_CPU_3M 0x00
-#define SDLA_CPU_5M 0x01
-#define SDLA_CPU_7M 0x02
-#define SDLA_CPU_8M 0x03
-#define SDLA_CPU_10M 0x04
-#define SDLA_CPU_16M 0x05
-#define SDLA_CPU_12M 0x06
-
-/* some private IOCTLs */
-#define SDLA_IDENTIFY (FRAD_LAST_IOCTL + 1)
-#define SDLA_CPUSPEED (FRAD_LAST_IOCTL + 2)
-#define SDLA_PROTOCOL (FRAD_LAST_IOCTL + 3)
-
-#define SDLA_CLEARMEM (FRAD_LAST_IOCTL + 4)
-#define SDLA_WRITEMEM (FRAD_LAST_IOCTL + 5)
-#define SDLA_READMEM (FRAD_LAST_IOCTL + 6)
-
-struct sdla_mem {
- int addr;
- int len;
- void __user *data;
-};
-
-#define SDLA_START (FRAD_LAST_IOCTL + 7)
-#define SDLA_STOP (FRAD_LAST_IOCTL + 8)
-
-/* some offsets in the Z80's memory space */
-#define SDLA_NMIADDR 0x0000
-#define SDLA_CONF_ADDR 0x0010
-#define SDLA_S502A_NMIADDR 0x0066
-#define SDLA_CODE_BASEADDR 0x0100
-#define SDLA_WINDOW_SIZE 0x2000
-#define SDLA_ADDR_MASK 0x1FFF
-
-/* largest handleable block of data */
-#define SDLA_MAX_DATA 4080
-#define SDLA_MAX_MTU 4072 /* MAX_DATA - sizeof(fradhdr) */
-#define SDLA_MAX_DLCI 24
-
-/* this should be the same as frad_conf */
-struct sdla_conf {
- short station;
- short config;
- short kbaud;
- short clocking;
- short max_frm;
- short T391;
- short T392;
- short N391;
- short N392;
- short N393;
- short CIR_fwd;
- short Bc_fwd;
- short Be_fwd;
- short CIR_bwd;
- short Bc_bwd;
- short Be_bwd;
-};
-
-/* this should be the same as dlci_conf */
-struct sdla_dlci_conf {
- short config;
- short CIR_fwd;
- short Bc_fwd;
- short Be_fwd;
- short CIR_bwd;
- short Bc_bwd;
- short Be_bwd;
- short Tc_fwd;
- short Tc_bwd;
- short Tf_max;
- short Tb_max;
-};
-
-#ifdef __KERNEL__
/* important Z80 window addresses */
#define SDLA_CONTROL_WND 0xE000
@@ -331,5 +242,3 @@
} __attribute__((packed));
#endif
-
-#endif
diff --git a/include/linux/seccomp.h b/include/linux/seccomp.h
index 84f6320d..6f19cfd 100644
--- a/include/linux/seccomp.h
+++ b/include/linux/seccomp.h
@@ -1,50 +1,8 @@
#ifndef _LINUX_SECCOMP_H
#define _LINUX_SECCOMP_H
-#include <linux/compiler.h>
-#include <linux/types.h>
+#include <uapi/linux/seccomp.h>
-
-/* Valid values for seccomp.mode and prctl(PR_SET_SECCOMP, <mode>) */
-#define SECCOMP_MODE_DISABLED 0 /* seccomp is not in use. */
-#define SECCOMP_MODE_STRICT 1 /* uses hard-coded filter. */
-#define SECCOMP_MODE_FILTER 2 /* uses user-supplied filter. */
-
-/*
- * All BPF programs must return a 32-bit value.
- * The bottom 16-bits are for optional return data.
- * The upper 16-bits are ordered from least permissive values to most.
- *
- * The ordering ensures that a min_t() over composed return values always
- * selects the least permissive choice.
- */
-#define SECCOMP_RET_KILL 0x00000000U /* kill the task immediately */
-#define SECCOMP_RET_TRAP 0x00030000U /* disallow and force a SIGSYS */
-#define SECCOMP_RET_ERRNO 0x00050000U /* returns an errno */
-#define SECCOMP_RET_TRACE 0x7ff00000U /* pass to a tracer or disallow */
-#define SECCOMP_RET_ALLOW 0x7fff0000U /* allow */
-
-/* Masks for the return value sections. */
-#define SECCOMP_RET_ACTION 0x7fff0000U
-#define SECCOMP_RET_DATA 0x0000ffffU
-
-/**
- * struct seccomp_data - the format the BPF program executes over.
- * @nr: the system call number
- * @arch: indicates system call convention as an AUDIT_ARCH_* value
- * as defined in <linux/audit.h>.
- * @instruction_pointer: at the time of the system call.
- * @args: up to 6 system call arguments always stored as 64-bit values
- * regardless of the architecture.
- */
-struct seccomp_data {
- int nr;
- __u32 arch;
- __u64 instruction_pointer;
- __u64 args[6];
-};
-
-#ifdef __KERNEL__
#ifdef CONFIG_SECCOMP
#include <linux/thread_info.h>
@@ -129,5 +87,4 @@
return;
}
#endif /* CONFIG_SECCOMP_FILTER */
-#endif /* __KERNEL__ */
#endif /* _LINUX_SECCOMP_H */
diff --git a/include/linux/securebits.h b/include/linux/securebits.h
index 3340617..da1b33b 100644
--- a/include/linux/securebits.h
+++ b/include/linux/securebits.h
@@ -1,54 +1,7 @@
#ifndef _LINUX_SECUREBITS_H
#define _LINUX_SECUREBITS_H 1
-/* Each securesetting is implemented using two bits. One bit specifies
- whether the setting is on or off. The other bit specify whether the
- setting is locked or not. A setting which is locked cannot be
- changed from user-level. */
-#define issecure_mask(X) (1 << (X))
-#ifdef __KERNEL__
+#include <uapi/linux/securebits.h>
+
#define issecure(X) (issecure_mask(X) & current_cred_xxx(securebits))
-#endif
-
-#define SECUREBITS_DEFAULT 0x00000000
-
-/* When set UID 0 has no special privileges. When unset, we support
- inheritance of root-permissions and suid-root executable under
- compatibility mode. We raise the effective and inheritable bitmasks
- *of the executable file* if the effective uid of the new process is
- 0. If the real uid is 0, we raise the effective (legacy) bit of the
- executable file. */
-#define SECURE_NOROOT 0
-#define SECURE_NOROOT_LOCKED 1 /* make bit-0 immutable */
-
-#define SECBIT_NOROOT (issecure_mask(SECURE_NOROOT))
-#define SECBIT_NOROOT_LOCKED (issecure_mask(SECURE_NOROOT_LOCKED))
-
-/* When set, setuid to/from uid 0 does not trigger capability-"fixup".
- When unset, to provide compatiblility with old programs relying on
- set*uid to gain/lose privilege, transitions to/from uid 0 cause
- capabilities to be gained/lost. */
-#define SECURE_NO_SETUID_FIXUP 2
-#define SECURE_NO_SETUID_FIXUP_LOCKED 3 /* make bit-2 immutable */
-
-#define SECBIT_NO_SETUID_FIXUP (issecure_mask(SECURE_NO_SETUID_FIXUP))
-#define SECBIT_NO_SETUID_FIXUP_LOCKED \
- (issecure_mask(SECURE_NO_SETUID_FIXUP_LOCKED))
-
-/* When set, a process can retain its capabilities even after
- transitioning to a non-root user (the set-uid fixup suppressed by
- bit 2). Bit-4 is cleared when a process calls exec(); setting both
- bit 4 and 5 will create a barrier through exec that no exec()'d
- child can use this feature again. */
-#define SECURE_KEEP_CAPS 4
-#define SECURE_KEEP_CAPS_LOCKED 5 /* make bit-4 immutable */
-
-#define SECBIT_KEEP_CAPS (issecure_mask(SECURE_KEEP_CAPS))
-#define SECBIT_KEEP_CAPS_LOCKED (issecure_mask(SECURE_KEEP_CAPS_LOCKED))
-
-#define SECURE_ALL_BITS (issecure_mask(SECURE_NOROOT) | \
- issecure_mask(SECURE_NO_SETUID_FIXUP) | \
- issecure_mask(SECURE_KEEP_CAPS))
-#define SECURE_ALL_LOCKS (SECURE_ALL_BITS << 1)
-
#endif /* !_LINUX_SECUREBITS_H */
diff --git a/include/linux/sem.h b/include/linux/sem.h
index 10d6b22..53d4265 100644
--- a/include/linux/sem.h
+++ b/include/linux/sem.h
@@ -1,85 +1,10 @@
#ifndef _LINUX_SEM_H
#define _LINUX_SEM_H
-#include <linux/ipc.h>
-
-/* semop flags */
-#define SEM_UNDO 0x1000 /* undo the operation on exit */
-
-/* semctl Command Definitions. */
-#define GETPID 11 /* get sempid */
-#define GETVAL 12 /* get semval */
-#define GETALL 13 /* get all semval's */
-#define GETNCNT 14 /* get semncnt */
-#define GETZCNT 15 /* get semzcnt */
-#define SETVAL 16 /* set semval */
-#define SETALL 17 /* set all semval's */
-
-/* ipcs ctl cmds */
-#define SEM_STAT 18
-#define SEM_INFO 19
-
-/* Obsolete, used only for backwards compatibility and libc5 compiles */
-struct semid_ds {
- struct ipc_perm sem_perm; /* permissions .. see ipc.h */
- __kernel_time_t sem_otime; /* last semop time */
- __kernel_time_t sem_ctime; /* last change time */
- struct sem *sem_base; /* ptr to first semaphore in array */
- struct sem_queue *sem_pending; /* pending operations to be processed */
- struct sem_queue **sem_pending_last; /* last pending operation */
- struct sem_undo *undo; /* undo requests on this array */
- unsigned short sem_nsems; /* no. of semaphores in array */
-};
-
-/* Include the definition of semid64_ds */
-#include <asm/sembuf.h>
-
-/* semop system calls takes an array of these. */
-struct sembuf {
- unsigned short sem_num; /* semaphore index in array */
- short sem_op; /* semaphore operation */
- short sem_flg; /* operation flags */
-};
-
-/* arg for semctl system calls. */
-union semun {
- int val; /* value for SETVAL */
- struct semid_ds __user *buf; /* buffer for IPC_STAT & IPC_SET */
- unsigned short __user *array; /* array for GETALL & SETALL */
- struct seminfo __user *__buf; /* buffer for IPC_INFO */
- void __user *__pad;
-};
-
-struct seminfo {
- int semmap;
- int semmni;
- int semmns;
- int semmnu;
- int semmsl;
- int semopm;
- int semume;
- int semusz;
- int semvmx;
- int semaem;
-};
-
-#define SEMMNI 128 /* <= IPCMNI max # of semaphore identifiers */
-#define SEMMSL 250 /* <= 8 000 max num of semaphores per id */
-#define SEMMNS (SEMMNI*SEMMSL) /* <= INT_MAX max # of semaphores in system */
-#define SEMOPM 32 /* <= 1 000 max num of ops per semop call */
-#define SEMVMX 32767 /* <= 32767 semaphore maximum value */
-#define SEMAEM SEMVMX /* adjust on exit max value */
-
-/* unused */
-#define SEMUME SEMOPM /* max num of undo entries per process */
-#define SEMMNU SEMMNS /* num of undo structures system wide */
-#define SEMMAP SEMMNS /* # of entries in semaphore map */
-#define SEMUSZ 20 /* sizeof struct sem_undo */
-
-#ifdef __KERNEL__
#include <linux/atomic.h>
#include <linux/rcupdate.h>
#include <linux/cache.h>
+#include <uapi/linux/sem.h>
struct task_struct;
@@ -122,6 +47,4 @@
}
#endif
-#endif /* __KERNEL__ */
-
#endif /* _LINUX_SEM_H */
diff --git a/include/linux/serial.h b/include/linux/serial.h
index 861e51d..0916107 100644
--- a/include/linux/serial.h
+++ b/include/linux/serial.h
@@ -6,16 +6,11 @@
* Redistribution of this file is permitted under the terms of the GNU
* Public License (GPL)
*/
-
#ifndef _LINUX_SERIAL_H
#define _LINUX_SERIAL_H
-#include <linux/types.h>
-
-#include <linux/tty_flags.h>
-
-#ifdef __KERNEL__
#include <asm/page.h>
+#include <uapi/linux/serial.h>
/*
@@ -33,118 +28,6 @@
*/
#define SERIAL_XMIT_SIZE PAGE_SIZE
-#endif
-
-struct serial_struct {
- int type;
- int line;
- unsigned int port;
- int irq;
- int flags;
- int xmit_fifo_size;
- int custom_divisor;
- int baud_base;
- unsigned short close_delay;
- char io_type;
- char reserved_char[1];
- int hub6;
- unsigned short closing_wait; /* time to wait before closing */
- unsigned short closing_wait2; /* no longer used... */
- unsigned char *iomem_base;
- unsigned short iomem_reg_shift;
- unsigned int port_high;
- unsigned long iomap_base; /* cookie passed into ioremap */
-};
-
-/*
- * For the close wait times, 0 means wait forever for serial port to
- * flush its output. 65535 means don't wait at all.
- */
-#define ASYNC_CLOSING_WAIT_INF 0
-#define ASYNC_CLOSING_WAIT_NONE 65535
-
-/*
- * These are the supported serial types.
- */
-#define PORT_UNKNOWN 0
-#define PORT_8250 1
-#define PORT_16450 2
-#define PORT_16550 3
-#define PORT_16550A 4
-#define PORT_CIRRUS 5 /* usurped by cyclades.c */
-#define PORT_16650 6
-#define PORT_16650V2 7
-#define PORT_16750 8
-#define PORT_STARTECH 9 /* usurped by cyclades.c */
-#define PORT_16C950 10 /* Oxford Semiconductor */
-#define PORT_16654 11
-#define PORT_16850 12
-#define PORT_RSA 13 /* RSA-DV II/S card */
-#define PORT_MAX 13
-
-#define SERIAL_IO_PORT 0
-#define SERIAL_IO_HUB6 1
-#define SERIAL_IO_MEM 2
-
-#define UART_CLEAR_FIFO 0x01
-#define UART_USE_FIFO 0x02
-#define UART_STARTECH 0x04
-#define UART_NATSEMI 0x08
-
-
-/*
- * Multiport serial configuration structure --- external structure
- */
-struct serial_multiport_struct {
- int irq;
- int port1;
- unsigned char mask1, match1;
- int port2;
- unsigned char mask2, match2;
- int port3;
- unsigned char mask3, match3;
- int port4;
- unsigned char mask4, match4;
- int port_monitor;
- int reserved[32];
-};
-
-/*
- * Serial input interrupt line counters -- external structure
- * Four lines can interrupt: CTS, DSR, RI, DCD
- */
-struct serial_icounter_struct {
- int cts, dsr, rng, dcd;
- int rx, tx;
- int frame, overrun, parity, brk;
- int buf_overrun;
- int reserved[9];
-};
-
-/*
- * Serial interface for controlling RS485 settings on chips with suitable
- * support. Set with TIOCSRS485 and get with TIOCGRS485 if supported by your
- * platform. The set function returns the new state, with any unsupported bits
- * reverted appropriately.
- */
-
-struct serial_rs485 {
- __u32 flags; /* RS485 feature flags */
-#define SER_RS485_ENABLED (1 << 0) /* If enabled */
-#define SER_RS485_RTS_ON_SEND (1 << 1) /* Logical level for
- RTS pin when
- sending */
-#define SER_RS485_RTS_AFTER_SEND (1 << 2) /* Logical level for
- RTS pin after sent*/
-#define SER_RS485_RX_DURING_TX (1 << 4)
- __u32 delay_rts_before_send; /* Delay before send (milliseconds) */
- __u32 delay_rts_after_send; /* Delay after send (milliseconds) */
- __u32 padding[5]; /* Memory is cheap, new structs
- are a royal PITA .. */
-};
-
-#ifdef __KERNEL__
#include <linux/compiler.h>
-#endif /* __KERNEL__ */
#endif /* _LINUX_SERIAL_H */
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index f9b22ec..3c43022 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -20,202 +20,6 @@
#ifndef LINUX_SERIAL_CORE_H
#define LINUX_SERIAL_CORE_H
-#include <linux/serial.h>
-
-/*
- * The type definitions. These are from Ted Ts'o's serial.h
- */
-#define PORT_UNKNOWN 0
-#define PORT_8250 1
-#define PORT_16450 2
-#define PORT_16550 3
-#define PORT_16550A 4
-#define PORT_CIRRUS 5
-#define PORT_16650 6
-#define PORT_16650V2 7
-#define PORT_16750 8
-#define PORT_STARTECH 9
-#define PORT_16C950 10
-#define PORT_16654 11
-#define PORT_16850 12
-#define PORT_RSA 13
-#define PORT_NS16550A 14
-#define PORT_XSCALE 15
-#define PORT_RM9000 16 /* PMC-Sierra RM9xxx internal UART */
-#define PORT_OCTEON 17 /* Cavium OCTEON internal UART */
-#define PORT_AR7 18 /* Texas Instruments AR7 internal UART */
-#define PORT_U6_16550A 19 /* ST-Ericsson U6xxx internal UART */
-#define PORT_TEGRA 20 /* NVIDIA Tegra internal UART */
-#define PORT_XR17D15X 21 /* Exar XR17D15x UART */
-#define PORT_LPC3220 22 /* NXP LPC32xx SoC "Standard" UART */
-#define PORT_8250_CIR 23 /* CIR infrared port, has its own driver */
-#define PORT_MAX_8250 23 /* max port ID */
-
-/*
- * ARM specific type numbers. These are not currently guaranteed
- * to be implemented, and will change in the future. These are
- * separate so any additions to the old serial.c that occur before
- * we are merged can be easily merged here.
- */
-#define PORT_PXA 31
-#define PORT_AMBA 32
-#define PORT_CLPS711X 33
-#define PORT_SA1100 34
-#define PORT_UART00 35
-#define PORT_21285 37
-
-/* Sparc type numbers. */
-#define PORT_SUNZILOG 38
-#define PORT_SUNSAB 39
-
-/* DEC */
-#define PORT_DZ 46
-#define PORT_ZS 47
-
-/* Parisc type numbers. */
-#define PORT_MUX 48
-
-/* Atmel AT91 / AT32 SoC */
-#define PORT_ATMEL 49
-
-/* Macintosh Zilog type numbers */
-#define PORT_MAC_ZILOG 50 /* m68k : not yet implemented */
-#define PORT_PMAC_ZILOG 51
-
-/* SH-SCI */
-#define PORT_SCI 52
-#define PORT_SCIF 53
-#define PORT_IRDA 54
-
-/* Samsung S3C2410 SoC and derivatives thereof */
-#define PORT_S3C2410 55
-
-/* SGI IP22 aka Indy / Challenge S / Indigo 2 */
-#define PORT_IP22ZILOG 56
-
-/* Sharp LH7a40x -- an ARM9 SoC series */
-#define PORT_LH7A40X 57
-
-/* PPC CPM type number */
-#define PORT_CPM 58
-
-/* MPC52xx (and MPC512x) type numbers */
-#define PORT_MPC52xx 59
-
-/* IBM icom */
-#define PORT_ICOM 60
-
-/* Samsung S3C2440 SoC */
-#define PORT_S3C2440 61
-
-/* Motorola i.MX SoC */
-#define PORT_IMX 62
-
-/* Marvell MPSC */
-#define PORT_MPSC 63
-
-/* TXX9 type number */
-#define PORT_TXX9 64
-
-/* NEC VR4100 series SIU/DSIU */
-#define PORT_VR41XX_SIU 65
-#define PORT_VR41XX_DSIU 66
-
-/* Samsung S3C2400 SoC */
-#define PORT_S3C2400 67
-
-/* M32R SIO */
-#define PORT_M32R_SIO 68
-
-/*Digi jsm */
-#define PORT_JSM 69
-
-#define PORT_PNX8XXX 70
-
-/* Hilscher netx */
-#define PORT_NETX 71
-
-/* SUN4V Hypervisor Console */
-#define PORT_SUNHV 72
-
-#define PORT_S3C2412 73
-
-/* Xilinx uartlite */
-#define PORT_UARTLITE 74
-
-/* Blackfin bf5xx */
-#define PORT_BFIN 75
-
-/* Micrel KS8695 */
-#define PORT_KS8695 76
-
-/* Broadcom SB1250, etc. SOC */
-#define PORT_SB1250_DUART 77
-
-/* Freescale ColdFire */
-#define PORT_MCF 78
-
-/* Blackfin SPORT */
-#define PORT_BFIN_SPORT 79
-
-/* MN10300 on-chip UART numbers */
-#define PORT_MN10300 80
-#define PORT_MN10300_CTS 81
-
-#define PORT_SC26XX 82
-
-/* SH-SCI */
-#define PORT_SCIFA 83
-
-#define PORT_S3C6400 84
-
-/* NWPSERIAL */
-#define PORT_NWPSERIAL 85
-
-/* MAX3100 */
-#define PORT_MAX3100 86
-
-/* Timberdale UART */
-#define PORT_TIMBUART 87
-
-/* Qualcomm MSM SoCs */
-#define PORT_MSM 88
-
-/* BCM63xx family SoCs */
-#define PORT_BCM63XX 89
-
-/* Aeroflex Gaisler GRLIB APBUART */
-#define PORT_APBUART 90
-
-/* Altera UARTs */
-#define PORT_ALTERA_JTAGUART 91
-#define PORT_ALTERA_UART 92
-
-/* SH-SCI */
-#define PORT_SCIFB 93
-
-/* MAX310X */
-#define PORT_MAX310X 94
-
-/* High Speed UART for Medfield */
-#define PORT_MFD 95
-
-/* TI OMAP-UART */
-#define PORT_OMAP 96
-
-/* VIA VT8500 SoC */
-#define PORT_VT8500 97
-
-/* Xilinx PSS UART */
-#define PORT_XUARTPS 98
-
-/* Atheros AR933X SoC */
-#define PORT_AR933X 99
-
-/* Energy Micro efm32 SoC */
-#define PORT_EFMUART 100
-
-#ifdef __KERNEL__
#include <linux/compiler.h>
#include <linux/interrupt.h>
@@ -226,6 +30,7 @@
#include <linux/mutex.h>
#include <linux/sysrq.h>
#include <linux/pps_kernel.h>
+#include <uapi/linux/serial_core.h>
struct uart_port;
struct serial_struct;
@@ -562,6 +367,4 @@
(cflag) & CRTSCTS || \
!((cflag) & CLOCAL))
-#endif
-
#endif /* LINUX_SERIAL_CORE_H */
diff --git a/include/linux/serio.h b/include/linux/serio.h
index 6d6cfd3..36aac73 100644
--- a/include/linux/serio.h
+++ b/include/linux/serio.h
@@ -1,6 +1,3 @@
-#ifndef _SERIO_H
-#define _SERIO_H
-
/*
* Copyright (C) 1999-2002 Vojtech Pavlik
*
@@ -8,12 +5,9 @@
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*/
+#ifndef _SERIO_H
+#define _SERIO_H
-#include <linux/ioctl.h>
-
-#define SPIOCSTYPE _IOW('q', 0x01, unsigned long)
-
-#ifdef __KERNEL__
#include <linux/types.h>
#include <linux/interrupt.h>
@@ -22,6 +16,7 @@
#include <linux/mutex.h>
#include <linux/device.h>
#include <linux/mod_devicetable.h>
+#include <uapi/linux/serio.h>
struct serio {
void *port_data;
@@ -152,68 +147,3 @@
}
#endif
-
-/*
- * bit masks for use in "interrupt" flags (3rd argument)
- */
-#define SERIO_TIMEOUT 1
-#define SERIO_PARITY 2
-#define SERIO_FRAME 4
-
-/*
- * Serio types
- */
-#define SERIO_XT 0x00
-#define SERIO_8042 0x01
-#define SERIO_RS232 0x02
-#define SERIO_HIL_MLC 0x03
-#define SERIO_PS_PSTHRU 0x05
-#define SERIO_8042_XL 0x06
-
-/*
- * Serio protocols
- */
-#define SERIO_UNKNOWN 0x00
-#define SERIO_MSC 0x01
-#define SERIO_SUN 0x02
-#define SERIO_MS 0x03
-#define SERIO_MP 0x04
-#define SERIO_MZ 0x05
-#define SERIO_MZP 0x06
-#define SERIO_MZPP 0x07
-#define SERIO_VSXXXAA 0x08
-#define SERIO_SUNKBD 0x10
-#define SERIO_WARRIOR 0x18
-#define SERIO_SPACEORB 0x19
-#define SERIO_MAGELLAN 0x1a
-#define SERIO_SPACEBALL 0x1b
-#define SERIO_GUNZE 0x1c
-#define SERIO_IFORCE 0x1d
-#define SERIO_STINGER 0x1e
-#define SERIO_NEWTON 0x1f
-#define SERIO_STOWAWAY 0x20
-#define SERIO_H3600 0x21
-#define SERIO_PS2SER 0x22
-#define SERIO_TWIDKBD 0x23
-#define SERIO_TWIDJOY 0x24
-#define SERIO_HIL 0x25
-#define SERIO_SNES232 0x26
-#define SERIO_SEMTECH 0x27
-#define SERIO_LKKBD 0x28
-#define SERIO_ELO 0x29
-#define SERIO_MICROTOUCH 0x30
-#define SERIO_PENMOUNT 0x31
-#define SERIO_TOUCHRIGHT 0x32
-#define SERIO_TOUCHWIN 0x33
-#define SERIO_TAOSEVM 0x34
-#define SERIO_FUJITSU 0x35
-#define SERIO_ZHENHUA 0x36
-#define SERIO_INEXIO 0x37
-#define SERIO_TOUCHIT213 0x38
-#define SERIO_W8001 0x39
-#define SERIO_DYNAPRO 0x3a
-#define SERIO_HAMPSHIRE 0x3b
-#define SERIO_PS2MULT 0x3c
-#define SERIO_TSC40 0x3d
-
-#endif
diff --git a/include/linux/shm.h b/include/linux/shm.h
index edd0868..bcf8a6a 100644
--- a/include/linux/shm.h
+++ b/include/linux/shm.h
@@ -1,88 +1,11 @@
#ifndef _LINUX_SHM_H_
#define _LINUX_SHM_H_
-#include <linux/ipc.h>
-#include <linux/errno.h>
-#ifdef __KERNEL__
#include <asm/page.h>
-#else
-#include <unistd.h>
-#endif
+#include <uapi/linux/shm.h>
-/*
- * SHMMAX, SHMMNI and SHMALL are upper limits are defaults which can
- * be increased by sysctl
- */
-
-#define SHMMAX 0x2000000 /* max shared seg size (bytes) */
-#define SHMMIN 1 /* min shared seg size (bytes) */
-#define SHMMNI 4096 /* max num of segs system wide */
-#ifdef __KERNEL__
#define SHMALL (SHMMAX/PAGE_SIZE*(SHMMNI/16)) /* max shm system wide (pages) */
-#else
-#define SHMALL (SHMMAX/getpagesize()*(SHMMNI/16))
-#endif
-#define SHMSEG SHMMNI /* max shared segs per process */
-
-#ifdef __KERNEL__
#include <asm/shmparam.h>
-#endif
-
-/* Obsolete, used only for backwards compatibility and libc5 compiles */
-struct shmid_ds {
- struct ipc_perm shm_perm; /* operation perms */
- int shm_segsz; /* size of segment (bytes) */
- __kernel_time_t shm_atime; /* last attach time */
- __kernel_time_t shm_dtime; /* last detach time */
- __kernel_time_t shm_ctime; /* last change time */
- __kernel_ipc_pid_t shm_cpid; /* pid of creator */
- __kernel_ipc_pid_t shm_lpid; /* pid of last operator */
- unsigned short shm_nattch; /* no. of current attaches */
- unsigned short shm_unused; /* compatibility */
- void *shm_unused2; /* ditto - used by DIPC */
- void *shm_unused3; /* unused */
-};
-
-/* Include the definition of shmid64_ds and shminfo64 */
-#include <asm/shmbuf.h>
-
-/* permission flag for shmget */
-#define SHM_R 0400 /* or S_IRUGO from <linux/stat.h> */
-#define SHM_W 0200 /* or S_IWUGO from <linux/stat.h> */
-
-/* mode for attach */
-#define SHM_RDONLY 010000 /* read-only access */
-#define SHM_RND 020000 /* round attach address to SHMLBA boundary */
-#define SHM_REMAP 040000 /* take-over region on attach */
-#define SHM_EXEC 0100000 /* execution access */
-
-/* super user shmctl commands */
-#define SHM_LOCK 11
-#define SHM_UNLOCK 12
-
-/* ipcs ctl commands */
-#define SHM_STAT 13
-#define SHM_INFO 14
-
-/* Obsolete, used only for backwards compatibility */
-struct shminfo {
- int shmmax;
- int shmmin;
- int shmmni;
- int shmseg;
- int shmall;
-};
-
-struct shm_info {
- int used_ids;
- unsigned long shm_tot; /* total allocated shm */
- unsigned long shm_rss; /* total resident shm */
- unsigned long shm_swp; /* total swapped shm */
- unsigned long swap_attempts;
- unsigned long swap_successes;
-};
-
-#ifdef __KERNEL__
struct shmid_kernel /* private to the kernel */
{
struct kern_ipc_perm shm_perm;
@@ -127,6 +50,4 @@
}
#endif
-#endif /* __KERNEL__ */
-
#endif /* _LINUX_SHM_H_ */
diff --git a/include/linux/signal.h b/include/linux/signal.h
index 26b424a..e19a011 100644
--- a/include/linux/signal.h
+++ b/include/linux/signal.h
@@ -1,11 +1,8 @@
#ifndef _LINUX_SIGNAL_H
#define _LINUX_SIGNAL_H
-#include <asm/signal.h>
-#include <asm/siginfo.h>
-
-#ifdef __KERNEL__
#include <linux/list.h>
+#include <uapi/linux/signal.h>
struct task_struct;
@@ -388,6 +385,4 @@
void signals_init(void);
-#endif /* __KERNEL__ */
-
#endif /* _LINUX_SIGNAL_H */
diff --git a/include/linux/signalfd.h b/include/linux/signalfd.h
index 247399b..eadbe22 100644
--- a/include/linux/signalfd.h
+++ b/include/linux/signalfd.h
@@ -4,51 +4,11 @@
* Copyright (C) 2007 Davide Libenzi <davidel@xmailserver.org>
*
*/
-
#ifndef _LINUX_SIGNALFD_H
#define _LINUX_SIGNALFD_H
-#include <linux/types.h>
-/* For O_CLOEXEC and O_NONBLOCK */
-#include <linux/fcntl.h>
+#include <uapi/linux/signalfd.h>
-/* Flags for signalfd4. */
-#define SFD_CLOEXEC O_CLOEXEC
-#define SFD_NONBLOCK O_NONBLOCK
-
-struct signalfd_siginfo {
- __u32 ssi_signo;
- __s32 ssi_errno;
- __s32 ssi_code;
- __u32 ssi_pid;
- __u32 ssi_uid;
- __s32 ssi_fd;
- __u32 ssi_tid;
- __u32 ssi_band;
- __u32 ssi_overrun;
- __u32 ssi_trapno;
- __s32 ssi_status;
- __s32 ssi_int;
- __u64 ssi_ptr;
- __u64 ssi_utime;
- __u64 ssi_stime;
- __u64 ssi_addr;
- __u16 ssi_addr_lsb;
-
- /*
- * Pad strcture to 128 bytes. Remember to update the
- * pad size when you add new members. We use a fixed
- * size structure to avoid compatibility problems with
- * future versions, and we leave extra space for additional
- * members. We use fixed size members because this strcture
- * comes out of a read(2) and we really don't want to have
- * a compat on read(2).
- */
- __u8 __pad[46];
-};
-
-
-#ifdef __KERNEL__
#ifdef CONFIG_SIGNALFD
@@ -71,6 +31,4 @@
#endif /* CONFIG_SIGNALFD */
-#endif /* __KERNEL__ */
-
#endif /* _LINUX_SIGNALFD_H */
diff --git a/include/linux/sock_diag.h b/include/linux/sock_diag.h
index e3e395a..e8d702e 100644
--- a/include/linux/sock_diag.h
+++ b/include/linux/sock_diag.h
@@ -1,29 +1,8 @@
#ifndef __SOCK_DIAG_H__
#define __SOCK_DIAG_H__
-#include <linux/types.h>
+#include <uapi/linux/sock_diag.h>
-#define SOCK_DIAG_BY_FAMILY 20
-
-struct sock_diag_req {
- __u8 sdiag_family;
- __u8 sdiag_protocol;
-};
-
-enum {
- SK_MEMINFO_RMEM_ALLOC,
- SK_MEMINFO_RCVBUF,
- SK_MEMINFO_WMEM_ALLOC,
- SK_MEMINFO_SNDBUF,
- SK_MEMINFO_FWD_ALLOC,
- SK_MEMINFO_WMEM_QUEUED,
- SK_MEMINFO_OPTMEM,
- SK_MEMINFO_BACKLOG,
-
- SK_MEMINFO_VARS,
-};
-
-#ifdef __KERNEL__
struct sk_buff;
struct nlmsghdr;
struct sock;
@@ -44,5 +23,4 @@
int sock_diag_put_meminfo(struct sock *sk, struct sk_buff *skb, int attr);
-#endif /* KERNEL */
#endif
diff --git a/include/linux/socket.h b/include/linux/socket.h
index ba7b2e8..9a546ff 100644
--- a/include/linux/socket.h
+++ b/include/linux/socket.h
@@ -1,30 +1,13 @@
#ifndef _LINUX_SOCKET_H
#define _LINUX_SOCKET_H
-/*
- * Desired design of maximum size and alignment (see RFC2553)
- */
-#define _K_SS_MAXSIZE 128 /* Implementation specific max size */
-#define _K_SS_ALIGNSIZE (__alignof__ (struct sockaddr *))
- /* Implementation specific desired alignment */
-
-typedef unsigned short __kernel_sa_family_t;
-
-struct __kernel_sockaddr_storage {
- __kernel_sa_family_t ss_family; /* address family */
- /* Following field(s) are implementation specific */
- char __data[_K_SS_MAXSIZE - sizeof(unsigned short)];
- /* space to achieve desired size, */
- /* _SS_MAXSIZE value minus size of ss_family */
-} __attribute__ ((aligned(_K_SS_ALIGNSIZE))); /* force desired alignment */
-
-#ifdef __KERNEL__
#include <asm/socket.h> /* arch-dependent defines */
#include <linux/sockios.h> /* the SIOCxxx I/O controls */
#include <linux/uio.h> /* iovec support */
#include <linux/types.h> /* pid_t */
#include <linux/compiler.h> /* __user */
+#include <uapi/linux/socket.h>
struct pid;
struct cred;
@@ -340,5 +323,4 @@
unsigned int flags, struct timespec *timeout);
extern int __sys_sendmmsg(int fd, struct mmsghdr __user *mmsg,
unsigned int vlen, unsigned int flags);
-#endif /* not kernel and not glibc */
#endif /* _LINUX_SOCKET_H */
diff --git a/include/linux/sonet.h b/include/linux/sonet.h
index de8832d..680f9a3 100644
--- a/include/linux/sonet.h
+++ b/include/linux/sonet.h
@@ -1,64 +1,10 @@
/* sonet.h - SONET/SHD physical layer control */
-
-/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */
-
-
#ifndef LINUX_SONET_H
#define LINUX_SONET_H
-#define __SONET_ITEMS \
- __HANDLE_ITEM(section_bip); /* section parity errors (B1) */ \
- __HANDLE_ITEM(line_bip); /* line parity errors (B2) */ \
- __HANDLE_ITEM(path_bip); /* path parity errors (B3) */ \
- __HANDLE_ITEM(line_febe); /* line parity errors at remote */ \
- __HANDLE_ITEM(path_febe); /* path parity errors at remote */ \
- __HANDLE_ITEM(corr_hcs); /* correctable header errors */ \
- __HANDLE_ITEM(uncorr_hcs); /* uncorrectable header errors */ \
- __HANDLE_ITEM(tx_cells); /* cells sent */ \
- __HANDLE_ITEM(rx_cells); /* cells received */
-
-struct sonet_stats {
-#define __HANDLE_ITEM(i) int i
- __SONET_ITEMS
-#undef __HANDLE_ITEM
-} __attribute__ ((packed));
-
-
-#define SONET_GETSTAT _IOR('a',ATMIOC_PHYTYP,struct sonet_stats)
- /* get statistics */
-#define SONET_GETSTATZ _IOR('a',ATMIOC_PHYTYP+1,struct sonet_stats)
- /* ... and zero counters */
-#define SONET_SETDIAG _IOWR('a',ATMIOC_PHYTYP+2,int)
- /* set error insertion */
-#define SONET_CLRDIAG _IOWR('a',ATMIOC_PHYTYP+3,int)
- /* clear error insertion */
-#define SONET_GETDIAG _IOR('a',ATMIOC_PHYTYP+4,int)
- /* query error insertion */
-#define SONET_SETFRAMING _IOW('a',ATMIOC_PHYTYP+5,int)
- /* set framing mode (SONET/SDH) */
-#define SONET_GETFRAMING _IOR('a',ATMIOC_PHYTYP+6,int)
- /* get framing mode */
-#define SONET_GETFRSENSE _IOR('a',ATMIOC_PHYTYP+7, \
- unsigned char[SONET_FRSENSE_SIZE]) /* get framing sense information */
-
-#define SONET_INS_SBIP 1 /* section BIP */
-#define SONET_INS_LBIP 2 /* line BIP */
-#define SONET_INS_PBIP 4 /* path BIP */
-#define SONET_INS_FRAME 8 /* out of frame */
-#define SONET_INS_LOS 16 /* set line to zero */
-#define SONET_INS_LAIS 32 /* line alarm indication signal */
-#define SONET_INS_PAIS 64 /* path alarm indication signal */
-#define SONET_INS_HCS 128 /* insert HCS error */
-
-#define SONET_FRAME_SONET 0 /* SONET STS-3 framing */
-#define SONET_FRAME_SDH 1 /* SDH STM-1 framing */
-
-#define SONET_FRSENSE_SIZE 6 /* C1[3],H1[3] (0xff for unknown) */
-
-
-#ifdef __KERNEL__
#include <linux/atomic.h>
+#include <uapi/linux/sonet.h>
struct k_sonet_stats {
#define __HANDLE_ITEM(i) atomic_t i
@@ -71,5 +17,3 @@
struct sonet_stats *to);
#endif
-
-#endif
diff --git a/include/linux/sonypi.h b/include/linux/sonypi.h
index c0f87da..0b7cc26 100644
--- a/include/linux/sonypi.h
+++ b/include/linux/sonypi.h
@@ -32,117 +32,11 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
-
#ifndef _SONYPI_H_
#define _SONYPI_H_
-#include <linux/types.h>
+#include <uapi/linux/sonypi.h>
-/* events the user application reading /dev/sonypi can use */
-
-#define SONYPI_EVENT_IGNORE 0
-#define SONYPI_EVENT_JOGDIAL_DOWN 1
-#define SONYPI_EVENT_JOGDIAL_UP 2
-#define SONYPI_EVENT_JOGDIAL_DOWN_PRESSED 3
-#define SONYPI_EVENT_JOGDIAL_UP_PRESSED 4
-#define SONYPI_EVENT_JOGDIAL_PRESSED 5
-#define SONYPI_EVENT_JOGDIAL_RELEASED 6 /* obsolete */
-#define SONYPI_EVENT_CAPTURE_PRESSED 7
-#define SONYPI_EVENT_CAPTURE_RELEASED 8 /* obsolete */
-#define SONYPI_EVENT_CAPTURE_PARTIALPRESSED 9
-#define SONYPI_EVENT_CAPTURE_PARTIALRELEASED 10
-#define SONYPI_EVENT_FNKEY_ESC 11
-#define SONYPI_EVENT_FNKEY_F1 12
-#define SONYPI_EVENT_FNKEY_F2 13
-#define SONYPI_EVENT_FNKEY_F3 14
-#define SONYPI_EVENT_FNKEY_F4 15
-#define SONYPI_EVENT_FNKEY_F5 16
-#define SONYPI_EVENT_FNKEY_F6 17
-#define SONYPI_EVENT_FNKEY_F7 18
-#define SONYPI_EVENT_FNKEY_F8 19
-#define SONYPI_EVENT_FNKEY_F9 20
-#define SONYPI_EVENT_FNKEY_F10 21
-#define SONYPI_EVENT_FNKEY_F11 22
-#define SONYPI_EVENT_FNKEY_F12 23
-#define SONYPI_EVENT_FNKEY_1 24
-#define SONYPI_EVENT_FNKEY_2 25
-#define SONYPI_EVENT_FNKEY_D 26
-#define SONYPI_EVENT_FNKEY_E 27
-#define SONYPI_EVENT_FNKEY_F 28
-#define SONYPI_EVENT_FNKEY_S 29
-#define SONYPI_EVENT_FNKEY_B 30
-#define SONYPI_EVENT_BLUETOOTH_PRESSED 31
-#define SONYPI_EVENT_PKEY_P1 32
-#define SONYPI_EVENT_PKEY_P2 33
-#define SONYPI_EVENT_PKEY_P3 34
-#define SONYPI_EVENT_BACK_PRESSED 35
-#define SONYPI_EVENT_LID_CLOSED 36
-#define SONYPI_EVENT_LID_OPENED 37
-#define SONYPI_EVENT_BLUETOOTH_ON 38
-#define SONYPI_EVENT_BLUETOOTH_OFF 39
-#define SONYPI_EVENT_HELP_PRESSED 40
-#define SONYPI_EVENT_FNKEY_ONLY 41
-#define SONYPI_EVENT_JOGDIAL_FAST_DOWN 42
-#define SONYPI_EVENT_JOGDIAL_FAST_UP 43
-#define SONYPI_EVENT_JOGDIAL_FAST_DOWN_PRESSED 44
-#define SONYPI_EVENT_JOGDIAL_FAST_UP_PRESSED 45
-#define SONYPI_EVENT_JOGDIAL_VFAST_DOWN 46
-#define SONYPI_EVENT_JOGDIAL_VFAST_UP 47
-#define SONYPI_EVENT_JOGDIAL_VFAST_DOWN_PRESSED 48
-#define SONYPI_EVENT_JOGDIAL_VFAST_UP_PRESSED 49
-#define SONYPI_EVENT_ZOOM_PRESSED 50
-#define SONYPI_EVENT_THUMBPHRASE_PRESSED 51
-#define SONYPI_EVENT_MEYE_FACE 52
-#define SONYPI_EVENT_MEYE_OPPOSITE 53
-#define SONYPI_EVENT_MEMORYSTICK_INSERT 54
-#define SONYPI_EVENT_MEMORYSTICK_EJECT 55
-#define SONYPI_EVENT_ANYBUTTON_RELEASED 56
-#define SONYPI_EVENT_BATTERY_INSERT 57
-#define SONYPI_EVENT_BATTERY_REMOVE 58
-#define SONYPI_EVENT_FNKEY_RELEASED 59
-#define SONYPI_EVENT_WIRELESS_ON 60
-#define SONYPI_EVENT_WIRELESS_OFF 61
-#define SONYPI_EVENT_ZOOM_IN_PRESSED 62
-#define SONYPI_EVENT_ZOOM_OUT_PRESSED 63
-#define SONYPI_EVENT_CD_EJECT_PRESSED 64
-#define SONYPI_EVENT_MODEKEY_PRESSED 65
-#define SONYPI_EVENT_PKEY_P4 66
-#define SONYPI_EVENT_PKEY_P5 67
-#define SONYPI_EVENT_SETTINGKEY_PRESSED 68
-#define SONYPI_EVENT_VOLUME_INC_PRESSED 69
-#define SONYPI_EVENT_VOLUME_DEC_PRESSED 70
-#define SONYPI_EVENT_BRIGHTNESS_PRESSED 71
-#define SONYPI_EVENT_MEDIA_PRESSED 72
-#define SONYPI_EVENT_VENDOR_PRESSED 73
-
-/* get/set brightness */
-#define SONYPI_IOCGBRT _IOR('v', 0, __u8)
-#define SONYPI_IOCSBRT _IOW('v', 0, __u8)
-
-/* get battery full capacity/remaining capacity */
-#define SONYPI_IOCGBAT1CAP _IOR('v', 2, __u16)
-#define SONYPI_IOCGBAT1REM _IOR('v', 3, __u16)
-#define SONYPI_IOCGBAT2CAP _IOR('v', 4, __u16)
-#define SONYPI_IOCGBAT2REM _IOR('v', 5, __u16)
-
-/* get battery flags: battery1/battery2/ac adapter present */
-#define SONYPI_BFLAGS_B1 0x01
-#define SONYPI_BFLAGS_B2 0x02
-#define SONYPI_BFLAGS_AC 0x04
-#define SONYPI_IOCGBATFLAGS _IOR('v', 7, __u8)
-
-/* get/set bluetooth subsystem state on/off */
-#define SONYPI_IOCGBLUE _IOR('v', 8, __u8)
-#define SONYPI_IOCSBLUE _IOW('v', 9, __u8)
-
-/* get/set fan state on/off */
-#define SONYPI_IOCGFAN _IOR('v', 10, __u8)
-#define SONYPI_IOCSFAN _IOW('v', 11, __u8)
-
-/* get temperature (C) */
-#define SONYPI_IOCGTEMP _IOR('v', 12, __u8)
-
-#ifdef __KERNEL__
/* used only for communication between v4l and sonypi */
@@ -166,6 +60,4 @@
#define SONYPI_COMMAND_GETCAMERAROMVERSION 18 /* obsolete */
#define SONYPI_COMMAND_GETCAMERAREVISION 19 /* obsolete */
-#endif /* __KERNEL__ */
-
#endif /* _SONYPI_H_ */
diff --git a/include/linux/sound.h b/include/linux/sound.h
index fae20ba..73ded04 100644
--- a/include/linux/sound.h
+++ b/include/linux/sound.h
@@ -1,33 +1,8 @@
#ifndef _LINUX_SOUND_H
#define _LINUX_SOUND_H
-/*
- * Minor numbers for the sound driver.
- */
+#include <uapi/linux/sound.h>
-#include <linux/fs.h>
-
-#define SND_DEV_CTL 0 /* Control port /dev/mixer */
-#define SND_DEV_SEQ 1 /* Sequencer output /dev/sequencer (FM
- synthesizer and MIDI output) */
-#define SND_DEV_MIDIN 2 /* Raw midi access */
-#define SND_DEV_DSP 3 /* Digitized voice /dev/dsp */
-#define SND_DEV_AUDIO 4 /* Sparc compatible /dev/audio */
-#define SND_DEV_DSP16 5 /* Like /dev/dsp but 16 bits/sample */
-/* #define SND_DEV_STATUS 6 */ /* /dev/sndstat (obsolete) */
-#define SND_DEV_UNUSED 6
-#define SND_DEV_AWFM 7 /* Reserved */
-#define SND_DEV_SEQ2 8 /* /dev/sequencer, level 2 interface */
-/* #define SND_DEV_SNDPROC 9 */ /* /dev/sndproc for programmable devices (not used) */
-/* #define SND_DEV_DMMIDI 9 */
-#define SND_DEV_SYNTH 9 /* Raw synth access /dev/synth (same as /dev/dmfm) */
-#define SND_DEV_DMFM 10 /* Raw synth access /dev/dmfm */
-#define SND_DEV_UNKNOWN11 11
-#define SND_DEV_ADSP 12 /* Like /dev/dsp (obsolete) */
-#define SND_DEV_AMIDI 13 /* Like /dev/midi (obsolete) */
-#define SND_DEV_ADMMIDI 14 /* Like /dev/dmmidi (onsolete) */
-
-#ifdef __KERNEL__
/*
* Sound core interface functions
*/
@@ -43,6 +18,4 @@
extern void unregister_sound_mixer(int unit);
extern void unregister_sound_midi(int unit);
extern void unregister_sound_dsp(int unit);
-#endif /* __KERNEL__ */
-
#endif /* _LINUX_SOUND_H */
diff --git a/include/linux/soundcard.h b/include/linux/soundcard.h
index dfcf86f..96c79cb 100644
--- a/include/linux/soundcard.h
+++ b/include/linux/soundcard.h
@@ -1,5 +1,3 @@
-#ifndef SOUNDCARD_H
-#define SOUNDCARD_H
/*
* Copyright by Hannu Savolainen 1993-1997
*
@@ -23,174 +21,12 @@
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
+#ifndef SOUNDCARD_H
+#define SOUNDCARD_H
-
-/*
- * OSS interface version. With versions earlier than 3.6 this value is
- * an integer with value less than 361. In versions 3.6 and later
- * it's a six digit hexadecimal value. For example value
- * of 0x030600 represents OSS version 3.6.0.
- * Use ioctl(fd, OSS_GETVERSION, &int) to get the version number of
- * the currently active driver.
- */
-#define SOUND_VERSION 0x030802
-#define OPEN_SOUND_SYSTEM
-
-/* In Linux we need to be prepared for cross compiling */
-#include <linux/ioctl.h>
-
-/* Endian macros. */
-#ifdef __KERNEL__
# include <asm/byteorder.h>
-#else
-# include <endian.h>
-#endif
+#include <uapi/linux/soundcard.h>
-/*
- * Supported card ID numbers (Should be somewhere else?)
- */
-
-#define SNDCARD_ADLIB 1
-#define SNDCARD_SB 2
-#define SNDCARD_PAS 3
-#define SNDCARD_GUS 4
-#define SNDCARD_MPU401 5
-#define SNDCARD_SB16 6
-#define SNDCARD_SB16MIDI 7
-#define SNDCARD_UART6850 8
-#define SNDCARD_GUS16 9
-#define SNDCARD_MSS 10
-#define SNDCARD_PSS 11
-#define SNDCARD_SSCAPE 12
-#define SNDCARD_PSS_MPU 13
-#define SNDCARD_PSS_MSS 14
-#define SNDCARD_SSCAPE_MSS 15
-#define SNDCARD_TRXPRO 16
-#define SNDCARD_TRXPRO_SB 17
-#define SNDCARD_TRXPRO_MPU 18
-#define SNDCARD_MAD16 19
-#define SNDCARD_MAD16_MPU 20
-#define SNDCARD_CS4232 21
-#define SNDCARD_CS4232_MPU 22
-#define SNDCARD_MAUI 23
-#define SNDCARD_PSEUDO_MSS 24
-#define SNDCARD_GUSPNP 25
-#define SNDCARD_UART401 26
-/* Sound card numbers 27 to N are reserved. Don't add more numbers here. */
-
-/***********************************
- * IOCTL Commands for /dev/sequencer
- */
-
-#ifndef _SIOWR
-#if defined(_IOWR) && (defined(_AIX) || (!defined(sun) && !defined(sparc) && !defined(__sparc__) && !defined(__INCioctlh) && !defined(__Lynx__)))
-/* Use already defined ioctl defines if they exist (except with Sun or Sparc) */
-#define SIOCPARM_MASK IOCPARM_MASK
-#define SIOC_VOID IOC_VOID
-#define SIOC_OUT IOC_OUT
-#define SIOC_IN IOC_IN
-#define SIOC_INOUT IOC_INOUT
-#define _SIOC_SIZE _IOC_SIZE
-#define _SIOC_DIR _IOC_DIR
-#define _SIOC_NONE _IOC_NONE
-#define _SIOC_READ _IOC_READ
-#define _SIOC_WRITE _IOC_WRITE
-#define _SIO _IO
-#define _SIOR _IOR
-#define _SIOW _IOW
-#define _SIOWR _IOWR
-#else
-
-/* Ioctl's have the command encoded in the lower word,
- * and the size of any in or out parameters in the upper
- * word. The high 2 bits of the upper word are used
- * to encode the in/out status of the parameter; for now
- * we restrict parameters to at most 8191 bytes.
- */
-/* #define SIOCTYPE (0xff<<8) */
-#define SIOCPARM_MASK 0x1fff /* parameters must be < 8192 bytes */
-#define SIOC_VOID 0x00000000 /* no parameters */
-#define SIOC_OUT 0x20000000 /* copy out parameters */
-#define SIOC_IN 0x40000000 /* copy in parameters */
-#define SIOC_INOUT (SIOC_IN|SIOC_OUT)
-/* the 0x20000000 is so we can distinguish new ioctl's from old */
-#define _SIO(x,y) ((int)(SIOC_VOID|(x<<8)|y))
-#define _SIOR(x,y,t) ((int)(SIOC_OUT|((sizeof(t)&SIOCPARM_MASK)<<16)|(x<<8)|y))
-#define _SIOW(x,y,t) ((int)(SIOC_IN|((sizeof(t)&SIOCPARM_MASK)<<16)|(x<<8)|y))
-/* this should be _SIORW, but stdio got there first */
-#define _SIOWR(x,y,t) ((int)(SIOC_INOUT|((sizeof(t)&SIOCPARM_MASK)<<16)|(x<<8)|y))
-#define _SIOC_SIZE(x) ((x>>16)&SIOCPARM_MASK)
-#define _SIOC_DIR(x) (x & 0xf0000000)
-#define _SIOC_NONE SIOC_VOID
-#define _SIOC_READ SIOC_OUT
-#define _SIOC_WRITE SIOC_IN
-# endif /* _IOWR */
-#endif /* !_SIOWR */
-
-#define SNDCTL_SEQ_RESET _SIO ('Q', 0)
-#define SNDCTL_SEQ_SYNC _SIO ('Q', 1)
-#define SNDCTL_SYNTH_INFO _SIOWR('Q', 2, struct synth_info)
-#define SNDCTL_SEQ_CTRLRATE _SIOWR('Q', 3, int) /* Set/get timer resolution (HZ) */
-#define SNDCTL_SEQ_GETOUTCOUNT _SIOR ('Q', 4, int)
-#define SNDCTL_SEQ_GETINCOUNT _SIOR ('Q', 5, int)
-#define SNDCTL_SEQ_PERCMODE _SIOW ('Q', 6, int)
-#define SNDCTL_FM_LOAD_INSTR _SIOW ('Q', 7, struct sbi_instrument) /* Obsolete. Don't use!!!!!! */
-#define SNDCTL_SEQ_TESTMIDI _SIOW ('Q', 8, int)
-#define SNDCTL_SEQ_RESETSAMPLES _SIOW ('Q', 9, int)
-#define SNDCTL_SEQ_NRSYNTHS _SIOR ('Q',10, int)
-#define SNDCTL_SEQ_NRMIDIS _SIOR ('Q',11, int)
-#define SNDCTL_MIDI_INFO _SIOWR('Q',12, struct midi_info)
-#define SNDCTL_SEQ_THRESHOLD _SIOW ('Q',13, int)
-#define SNDCTL_SYNTH_MEMAVL _SIOWR('Q',14, int) /* in=dev#, out=memsize */
-#define SNDCTL_FM_4OP_ENABLE _SIOW ('Q',15, int) /* in=dev# */
-#define SNDCTL_SEQ_PANIC _SIO ('Q',17)
-#define SNDCTL_SEQ_OUTOFBAND _SIOW ('Q',18, struct seq_event_rec)
-#define SNDCTL_SEQ_GETTIME _SIOR ('Q',19, int)
-#define SNDCTL_SYNTH_ID _SIOWR('Q',20, struct synth_info)
-#define SNDCTL_SYNTH_CONTROL _SIOWR('Q',21, struct synth_control)
-#define SNDCTL_SYNTH_REMOVESAMPLE _SIOWR('Q',22, struct remove_sample)
-
-typedef struct synth_control
-{
- int devno; /* Synthesizer # */
- char data[4000]; /* Device spesific command/data record */
-}synth_control;
-
-typedef struct remove_sample
-{
- int devno; /* Synthesizer # */
- int bankno; /* MIDI bank # (0=General MIDI) */
- int instrno; /* MIDI instrument number */
-} remove_sample;
-
-typedef struct seq_event_rec {
- unsigned char arr[8];
-} seq_event_rec;
-
-#define SNDCTL_TMR_TIMEBASE _SIOWR('T', 1, int)
-#define SNDCTL_TMR_START _SIO ('T', 2)
-#define SNDCTL_TMR_STOP _SIO ('T', 3)
-#define SNDCTL_TMR_CONTINUE _SIO ('T', 4)
-#define SNDCTL_TMR_TEMPO _SIOWR('T', 5, int)
-#define SNDCTL_TMR_SOURCE _SIOWR('T', 6, int)
-# define TMR_INTERNAL 0x00000001
-# define TMR_EXTERNAL 0x00000002
-# define TMR_MODE_MIDI 0x00000010
-# define TMR_MODE_FSK 0x00000020
-# define TMR_MODE_CLS 0x00000040
-# define TMR_MODE_SMPTE 0x00000080
-#define SNDCTL_TMR_METRONOME _SIOW ('T', 7, int)
-#define SNDCTL_TMR_SELECT _SIOW ('T', 8, int)
-
-/*
- * Some big endian/little endian handling macros
- */
-
-#define _LINUX_PATCHKEY_H_INDIRECT
-#include <linux/patchkey.h>
-#undef _LINUX_PATCHKEY_H_INDIRECT
-
-#if defined(__KERNEL__)
# if defined(__BIG_ENDIAN)
# define AFMT_S16_NE AFMT_S16_BE
# elif defined(__LITTLE_ENDIAN)
@@ -198,1095 +34,4 @@
# else
# error "could not determine byte order"
# endif
-#else
-# if defined(__BYTE_ORDER)
-# if __BYTE_ORDER == __BIG_ENDIAN
-# define AFMT_S16_NE AFMT_S16_BE
-# elif __BYTE_ORDER == __LITTLE_ENDIAN
-# define AFMT_S16_NE AFMT_S16_LE
-# else
-# error "could not determine byte order"
-# endif
-# endif
-#endif
-
-/*
- * Sample loading mechanism for internal synthesizers (/dev/sequencer)
- * The following patch_info structure has been designed to support
- * Gravis UltraSound. It tries to be universal format for uploading
- * sample based patches but is probably too limited.
- *
- * (PBD) As Hannu guessed, the GUS structure is too limited for
- * the WaveFront, but this is the right place for a constant definition.
- */
-
-struct patch_info {
- unsigned short key; /* Use WAVE_PATCH here */
-#define WAVE_PATCH _PATCHKEY(0x04)
-#define GUS_PATCH WAVE_PATCH
-#define WAVEFRONT_PATCH _PATCHKEY(0x06)
-
- short device_no; /* Synthesizer number */
- short instr_no; /* Midi pgm# */
-
- unsigned int mode;
-/*
- * The least significant byte has the same format than the GUS .PAT
- * files
- */
-#define WAVE_16_BITS 0x01 /* bit 0 = 8 or 16 bit wave data. */
-#define WAVE_UNSIGNED 0x02 /* bit 1 = Signed - Unsigned data. */
-#define WAVE_LOOPING 0x04 /* bit 2 = looping enabled-1. */
-#define WAVE_BIDIR_LOOP 0x08 /* bit 3 = Set is bidirectional looping. */
-#define WAVE_LOOP_BACK 0x10 /* bit 4 = Set is looping backward. */
-#define WAVE_SUSTAIN_ON 0x20 /* bit 5 = Turn sustaining on. (Env. pts. 3)*/
-#define WAVE_ENVELOPES 0x40 /* bit 6 = Enable envelopes - 1 */
-#define WAVE_FAST_RELEASE 0x80 /* bit 7 = Shut off immediately after note off */
- /* (use the env_rate/env_offs fields). */
-/* Linux specific bits */
-#define WAVE_VIBRATO 0x00010000 /* The vibrato info is valid */
-#define WAVE_TREMOLO 0x00020000 /* The tremolo info is valid */
-#define WAVE_SCALE 0x00040000 /* The scaling info is valid */
-#define WAVE_FRACTIONS 0x00080000 /* Fraction information is valid */
-/* Reserved bits */
-#define WAVE_ROM 0x40000000 /* For future use */
-#define WAVE_MULAW 0x20000000 /* For future use */
-/* Other bits must be zeroed */
-
- int len; /* Size of the wave data in bytes */
- int loop_start, loop_end; /* Byte offsets from the beginning */
-
-/*
- * The base_freq and base_note fields are used when computing the
- * playback speed for a note. The base_note defines the tone frequency
- * which is heard if the sample is played using the base_freq as the
- * playback speed.
- *
- * The low_note and high_note fields define the minimum and maximum note
- * frequencies for which this sample is valid. It is possible to define
- * more than one samples for an instrument number at the same time. The
- * low_note and high_note fields are used to select the most suitable one.
- *
- * The fields base_note, high_note and low_note should contain
- * the note frequency multiplied by 1000. For example value for the
- * middle A is 440*1000.
- */
-
- unsigned int base_freq;
- unsigned int base_note;
- unsigned int high_note;
- unsigned int low_note;
- int panning; /* -128=left, 127=right */
- int detuning;
-
-/* New fields introduced in version 1.99.5 */
-
- /* Envelope. Enabled by mode bit WAVE_ENVELOPES */
- unsigned char env_rate[ 6 ]; /* GUS HW ramping rate */
- unsigned char env_offset[ 6 ]; /* 255 == 100% */
-
- /*
- * The tremolo, vibrato and scale info are not supported yet.
- * Enable by setting the mode bits WAVE_TREMOLO, WAVE_VIBRATO or
- * WAVE_SCALE
- */
-
- unsigned char tremolo_sweep;
- unsigned char tremolo_rate;
- unsigned char tremolo_depth;
-
- unsigned char vibrato_sweep;
- unsigned char vibrato_rate;
- unsigned char vibrato_depth;
-
- int scale_frequency;
- unsigned int scale_factor; /* from 0 to 2048 or 0 to 2 */
-
- int volume;
- int fractions;
- int reserved1;
- int spare[2];
- char data[1]; /* The waveform data starts here */
- };
-
-struct sysex_info {
- short key; /* Use SYSEX_PATCH or MAUI_PATCH here */
-#define SYSEX_PATCH _PATCHKEY(0x05)
-#define MAUI_PATCH _PATCHKEY(0x06)
- short device_no; /* Synthesizer number */
- int len; /* Size of the sysex data in bytes */
- unsigned char data[1]; /* Sysex data starts here */
- };
-
-/*
- * /dev/sequencer input events.
- *
- * The data written to the /dev/sequencer is a stream of events. Events
- * are records of 4 or 8 bytes. The first byte defines the size.
- * Any number of events can be written with a write call. There
- * is a set of macros for sending these events. Use these macros if you
- * want to maximize portability of your program.
- *
- * Events SEQ_WAIT, SEQ_MIDIPUTC and SEQ_ECHO. Are also input events.
- * (All input events are currently 4 bytes long. Be prepared to support
- * 8 byte events also. If you receive any event having first byte >= 128,
- * it's a 8 byte event.
- *
- * The events are documented at the end of this file.
- *
- * Normal events (4 bytes)
- * There is also a 8 byte version of most of the 4 byte events. The
- * 8 byte one is recommended.
- */
-#define SEQ_NOTEOFF 0
-#define SEQ_FMNOTEOFF SEQ_NOTEOFF /* Just old name */
-#define SEQ_NOTEON 1
-#define SEQ_FMNOTEON SEQ_NOTEON
-#define SEQ_WAIT TMR_WAIT_ABS
-#define SEQ_PGMCHANGE 3
-#define SEQ_FMPGMCHANGE SEQ_PGMCHANGE
-#define SEQ_SYNCTIMER TMR_START
-#define SEQ_MIDIPUTC 5
-#define SEQ_DRUMON 6 /*** OBSOLETE ***/
-#define SEQ_DRUMOFF 7 /*** OBSOLETE ***/
-#define SEQ_ECHO TMR_ECHO /* For synching programs with output */
-#define SEQ_AFTERTOUCH 9
-#define SEQ_CONTROLLER 10
-
-/*******************************************
- * Midi controller numbers
- *******************************************
- * Controllers 0 to 31 (0x00 to 0x1f) and
- * 32 to 63 (0x20 to 0x3f) are continuous
- * controllers.
- * In the MIDI 1.0 these controllers are sent using
- * two messages. Controller numbers 0 to 31 are used
- * to send the MSB and the controller numbers 32 to 63
- * are for the LSB. Note that just 7 bits are used in MIDI bytes.
- */
-
-#define CTL_BANK_SELECT 0x00
-#define CTL_MODWHEEL 0x01
-#define CTL_BREATH 0x02
-/* undefined 0x03 */
-#define CTL_FOOT 0x04
-#define CTL_PORTAMENTO_TIME 0x05
-#define CTL_DATA_ENTRY 0x06
-#define CTL_MAIN_VOLUME 0x07
-#define CTL_BALANCE 0x08
-/* undefined 0x09 */
-#define CTL_PAN 0x0a
-#define CTL_EXPRESSION 0x0b
-/* undefined 0x0c */
-/* undefined 0x0d */
-/* undefined 0x0e */
-/* undefined 0x0f */
-#define CTL_GENERAL_PURPOSE1 0x10
-#define CTL_GENERAL_PURPOSE2 0x11
-#define CTL_GENERAL_PURPOSE3 0x12
-#define CTL_GENERAL_PURPOSE4 0x13
-/* undefined 0x14 - 0x1f */
-
-/* undefined 0x20 */
-/* The controller numbers 0x21 to 0x3f are reserved for the */
-/* least significant bytes of the controllers 0x00 to 0x1f. */
-/* These controllers are not recognised by the driver. */
-
-/* Controllers 64 to 69 (0x40 to 0x45) are on/off switches. */
-/* 0=OFF and 127=ON (intermediate values are possible) */
-#define CTL_DAMPER_PEDAL 0x40
-#define CTL_SUSTAIN 0x40 /* Alias */
-#define CTL_HOLD 0x40 /* Alias */
-#define CTL_PORTAMENTO 0x41
-#define CTL_SOSTENUTO 0x42
-#define CTL_SOFT_PEDAL 0x43
-/* undefined 0x44 */
-#define CTL_HOLD2 0x45
-/* undefined 0x46 - 0x4f */
-
-#define CTL_GENERAL_PURPOSE5 0x50
-#define CTL_GENERAL_PURPOSE6 0x51
-#define CTL_GENERAL_PURPOSE7 0x52
-#define CTL_GENERAL_PURPOSE8 0x53
-/* undefined 0x54 - 0x5a */
-#define CTL_EXT_EFF_DEPTH 0x5b
-#define CTL_TREMOLO_DEPTH 0x5c
-#define CTL_CHORUS_DEPTH 0x5d
-#define CTL_DETUNE_DEPTH 0x5e
-#define CTL_CELESTE_DEPTH 0x5e /* Alias for the above one */
-#define CTL_PHASER_DEPTH 0x5f
-#define CTL_DATA_INCREMENT 0x60
-#define CTL_DATA_DECREMENT 0x61
-#define CTL_NONREG_PARM_NUM_LSB 0x62
-#define CTL_NONREG_PARM_NUM_MSB 0x63
-#define CTL_REGIST_PARM_NUM_LSB 0x64
-#define CTL_REGIST_PARM_NUM_MSB 0x65
-/* undefined 0x66 - 0x78 */
-/* reserved 0x79 - 0x7f */
-
-/* Pseudo controllers (not midi compatible) */
-#define CTRL_PITCH_BENDER 255
-#define CTRL_PITCH_BENDER_RANGE 254
-#define CTRL_EXPRESSION 253 /* Obsolete */
-#define CTRL_MAIN_VOLUME 252 /* Obsolete */
-#define SEQ_BALANCE 11
-#define SEQ_VOLMODE 12
-
-/*
- * Volume mode decides how volumes are used
- */
-
-#define VOL_METHOD_ADAGIO 1
-#define VOL_METHOD_LINEAR 2
-
-/*
- * Note! SEQ_WAIT, SEQ_MIDIPUTC and SEQ_ECHO are used also as
- * input events.
- */
-
-/*
- * Event codes 0xf0 to 0xfc are reserved for future extensions.
- */
-
-#define SEQ_FULLSIZE 0xfd /* Long events */
-/*
- * SEQ_FULLSIZE events are used for loading patches/samples to the
- * synthesizer devices. These events are passed directly to the driver
- * of the associated synthesizer device. There is no limit to the size
- * of the extended events. These events are not queued but executed
- * immediately when the write() is called (execution can take several
- * seconds of time).
- *
- * When a SEQ_FULLSIZE message is written to the device, it must
- * be written using exactly one write() call. Other events cannot
- * be mixed to the same write.
- *
- * For FM synths (YM3812/OPL3) use struct sbi_instrument and write it to the
- * /dev/sequencer. Don't write other data together with the instrument structure
- * Set the key field of the structure to FM_PATCH. The device field is used to
- * route the patch to the corresponding device.
- *
- * For wave table use struct patch_info. Initialize the key field
- * to WAVE_PATCH.
- */
-#define SEQ_PRIVATE 0xfe /* Low level HW dependent events (8 bytes) */
-#define SEQ_EXTENDED 0xff /* Extended events (8 bytes) OBSOLETE */
-
-/*
- * Record for FM patches
- */
-
-typedef unsigned char sbi_instr_data[32];
-
-struct sbi_instrument {
- unsigned short key; /* FM_PATCH or OPL3_PATCH */
-#define FM_PATCH _PATCHKEY(0x01)
-#define OPL3_PATCH _PATCHKEY(0x03)
- short device; /* Synth# (0-4) */
- int channel; /* Program# to be initialized */
- sbi_instr_data operators; /* Register settings for operator cells (.SBI format) */
- };
-
-struct synth_info { /* Read only */
- char name[30];
- int device; /* 0-N. INITIALIZE BEFORE CALLING */
- int synth_type;
-#define SYNTH_TYPE_FM 0
-#define SYNTH_TYPE_SAMPLE 1
-#define SYNTH_TYPE_MIDI 2 /* Midi interface */
-
- int synth_subtype;
-#define FM_TYPE_ADLIB 0x00
-#define FM_TYPE_OPL3 0x01
-#define MIDI_TYPE_MPU401 0x401
-
-#define SAMPLE_TYPE_BASIC 0x10
-#define SAMPLE_TYPE_GUS SAMPLE_TYPE_BASIC
-#define SAMPLE_TYPE_WAVEFRONT 0x11
-
- int perc_mode; /* No longer supported */
- int nr_voices;
- int nr_drums; /* Obsolete field */
- int instr_bank_size;
- unsigned int capabilities;
-#define SYNTH_CAP_PERCMODE 0x00000001 /* No longer used */
-#define SYNTH_CAP_OPL3 0x00000002 /* Set if OPL3 supported */
-#define SYNTH_CAP_INPUT 0x00000004 /* Input (MIDI) device */
- int dummies[19]; /* Reserve space */
- };
-
-struct sound_timer_info {
- char name[32];
- int caps;
- };
-
-#define MIDI_CAP_MPU401 1 /* MPU-401 intelligent mode */
-
-struct midi_info {
- char name[30];
- int device; /* 0-N. INITIALIZE BEFORE CALLING */
- unsigned int capabilities; /* To be defined later */
- int dev_type;
- int dummies[18]; /* Reserve space */
- };
-
-/********************************************
- * ioctl commands for the /dev/midi##
- */
-typedef struct {
- unsigned char cmd;
- char nr_args, nr_returns;
- unsigned char data[30];
- } mpu_command_rec;
-
-#define SNDCTL_MIDI_PRETIME _SIOWR('m', 0, int)
-#define SNDCTL_MIDI_MPUMODE _SIOWR('m', 1, int)
-#define SNDCTL_MIDI_MPUCMD _SIOWR('m', 2, mpu_command_rec)
-
-/********************************************
- * IOCTL commands for /dev/dsp and /dev/audio
- */
-
-#define SNDCTL_DSP_RESET _SIO ('P', 0)
-#define SNDCTL_DSP_SYNC _SIO ('P', 1)
-#define SNDCTL_DSP_SPEED _SIOWR('P', 2, int)
-#define SNDCTL_DSP_STEREO _SIOWR('P', 3, int)
-#define SNDCTL_DSP_GETBLKSIZE _SIOWR('P', 4, int)
-#define SNDCTL_DSP_SAMPLESIZE SNDCTL_DSP_SETFMT
-#define SNDCTL_DSP_CHANNELS _SIOWR('P', 6, int)
-#define SOUND_PCM_WRITE_CHANNELS SNDCTL_DSP_CHANNELS
-#define SOUND_PCM_WRITE_FILTER _SIOWR('P', 7, int)
-#define SNDCTL_DSP_POST _SIO ('P', 8)
-#define SNDCTL_DSP_SUBDIVIDE _SIOWR('P', 9, int)
-#define SNDCTL_DSP_SETFRAGMENT _SIOWR('P',10, int)
-
-/* Audio data formats (Note! U8=8 and S16_LE=16 for compatibility) */
-#define SNDCTL_DSP_GETFMTS _SIOR ('P',11, int) /* Returns a mask */
-#define SNDCTL_DSP_SETFMT _SIOWR('P',5, int) /* Selects ONE fmt*/
-# define AFMT_QUERY 0x00000000 /* Return current fmt */
-# define AFMT_MU_LAW 0x00000001
-# define AFMT_A_LAW 0x00000002
-# define AFMT_IMA_ADPCM 0x00000004
-# define AFMT_U8 0x00000008
-# define AFMT_S16_LE 0x00000010 /* Little endian signed 16*/
-# define AFMT_S16_BE 0x00000020 /* Big endian signed 16 */
-# define AFMT_S8 0x00000040
-# define AFMT_U16_LE 0x00000080 /* Little endian U16 */
-# define AFMT_U16_BE 0x00000100 /* Big endian U16 */
-# define AFMT_MPEG 0x00000200 /* MPEG (2) audio */
-# define AFMT_AC3 0x00000400 /* Dolby Digital AC3 */
-
-/*
- * Buffer status queries.
- */
-typedef struct audio_buf_info {
- int fragments; /* # of available fragments (partially usend ones not counted) */
- int fragstotal; /* Total # of fragments allocated */
- int fragsize; /* Size of a fragment in bytes */
-
- int bytes; /* Available space in bytes (includes partially used fragments) */
- /* Note! 'bytes' could be more than fragments*fragsize */
- } audio_buf_info;
-
-#define SNDCTL_DSP_GETOSPACE _SIOR ('P',12, audio_buf_info)
-#define SNDCTL_DSP_GETISPACE _SIOR ('P',13, audio_buf_info)
-#define SNDCTL_DSP_NONBLOCK _SIO ('P',14)
-#define SNDCTL_DSP_GETCAPS _SIOR ('P',15, int)
-# define DSP_CAP_REVISION 0x000000ff /* Bits for revision level (0 to 255) */
-# define DSP_CAP_DUPLEX 0x00000100 /* Full duplex record/playback */
-# define DSP_CAP_REALTIME 0x00000200 /* Real time capability */
-# define DSP_CAP_BATCH 0x00000400 /* Device has some kind of */
- /* internal buffers which may */
- /* cause some delays and */
- /* decrease precision of timing */
-# define DSP_CAP_COPROC 0x00000800 /* Has a coprocessor */
- /* Sometimes it's a DSP */
- /* but usually not */
-# define DSP_CAP_TRIGGER 0x00001000 /* Supports SETTRIGGER */
-# define DSP_CAP_MMAP 0x00002000 /* Supports mmap() */
-# define DSP_CAP_MULTI 0x00004000 /* support multiple open */
-# define DSP_CAP_BIND 0x00008000 /* channel binding to front/rear/cneter/lfe */
-
-
-#define SNDCTL_DSP_GETTRIGGER _SIOR ('P',16, int)
-#define SNDCTL_DSP_SETTRIGGER _SIOW ('P',16, int)
-# define PCM_ENABLE_INPUT 0x00000001
-# define PCM_ENABLE_OUTPUT 0x00000002
-
-typedef struct count_info {
- int bytes; /* Total # of bytes processed */
- int blocks; /* # of fragment transitions since last time */
- int ptr; /* Current DMA pointer value */
- } count_info;
-
-#define SNDCTL_DSP_GETIPTR _SIOR ('P',17, count_info)
-#define SNDCTL_DSP_GETOPTR _SIOR ('P',18, count_info)
-
-typedef struct buffmem_desc {
- unsigned *buffer;
- int size;
- } buffmem_desc;
-#define SNDCTL_DSP_MAPINBUF _SIOR ('P', 19, buffmem_desc)
-#define SNDCTL_DSP_MAPOUTBUF _SIOR ('P', 20, buffmem_desc)
-#define SNDCTL_DSP_SETSYNCRO _SIO ('P', 21)
-#define SNDCTL_DSP_SETDUPLEX _SIO ('P', 22)
-#define SNDCTL_DSP_GETODELAY _SIOR ('P', 23, int)
-
-#define SNDCTL_DSP_GETCHANNELMASK _SIOWR('P', 64, int)
-#define SNDCTL_DSP_BIND_CHANNEL _SIOWR('P', 65, int)
-# define DSP_BIND_QUERY 0x00000000
-# define DSP_BIND_FRONT 0x00000001
-# define DSP_BIND_SURR 0x00000002
-# define DSP_BIND_CENTER_LFE 0x00000004
-# define DSP_BIND_HANDSET 0x00000008
-# define DSP_BIND_MIC 0x00000010
-# define DSP_BIND_MODEM1 0x00000020
-# define DSP_BIND_MODEM2 0x00000040
-# define DSP_BIND_I2S 0x00000080
-# define DSP_BIND_SPDIF 0x00000100
-
-#define SNDCTL_DSP_SETSPDIF _SIOW ('P', 66, int)
-#define SNDCTL_DSP_GETSPDIF _SIOR ('P', 67, int)
-# define SPDIF_PRO 0x0001
-# define SPDIF_N_AUD 0x0002
-# define SPDIF_COPY 0x0004
-# define SPDIF_PRE 0x0008
-# define SPDIF_CC 0x07f0
-# define SPDIF_L 0x0800
-# define SPDIF_DRS 0x4000
-# define SPDIF_V 0x8000
-
-/*
- * Application's profile defines the way how playback underrun situations should be handled.
- *
- * APF_NORMAL (the default) and APF_NETWORK make the driver to cleanup the
- * playback buffer whenever an underrun occurs. This consumes some time
- * prevents looping the existing buffer.
- * APF_CPUINTENS is intended to be set by CPU intensive applications which
- * are likely to run out of time occasionally. In this mode the buffer cleanup is
- * disabled which saves CPU time but also let's the previous buffer content to
- * be played during the "pause" after the underrun.
- */
-#define SNDCTL_DSP_PROFILE _SIOW ('P', 23, int)
-#define APF_NORMAL 0 /* Normal applications */
-#define APF_NETWORK 1 /* Underruns probably caused by an "external" delay */
-#define APF_CPUINTENS 2 /* Underruns probably caused by "overheating" the CPU */
-
-#define SOUND_PCM_READ_RATE _SIOR ('P', 2, int)
-#define SOUND_PCM_READ_CHANNELS _SIOR ('P', 6, int)
-#define SOUND_PCM_READ_BITS _SIOR ('P', 5, int)
-#define SOUND_PCM_READ_FILTER _SIOR ('P', 7, int)
-
-/* Some alias names */
-#define SOUND_PCM_WRITE_BITS SNDCTL_DSP_SETFMT
-#define SOUND_PCM_WRITE_RATE SNDCTL_DSP_SPEED
-#define SOUND_PCM_POST SNDCTL_DSP_POST
-#define SOUND_PCM_RESET SNDCTL_DSP_RESET
-#define SOUND_PCM_SYNC SNDCTL_DSP_SYNC
-#define SOUND_PCM_SUBDIVIDE SNDCTL_DSP_SUBDIVIDE
-#define SOUND_PCM_SETFRAGMENT SNDCTL_DSP_SETFRAGMENT
-#define SOUND_PCM_GETFMTS SNDCTL_DSP_GETFMTS
-#define SOUND_PCM_SETFMT SNDCTL_DSP_SETFMT
-#define SOUND_PCM_GETOSPACE SNDCTL_DSP_GETOSPACE
-#define SOUND_PCM_GETISPACE SNDCTL_DSP_GETISPACE
-#define SOUND_PCM_NONBLOCK SNDCTL_DSP_NONBLOCK
-#define SOUND_PCM_GETCAPS SNDCTL_DSP_GETCAPS
-#define SOUND_PCM_GETTRIGGER SNDCTL_DSP_GETTRIGGER
-#define SOUND_PCM_SETTRIGGER SNDCTL_DSP_SETTRIGGER
-#define SOUND_PCM_SETSYNCRO SNDCTL_DSP_SETSYNCRO
-#define SOUND_PCM_GETIPTR SNDCTL_DSP_GETIPTR
-#define SOUND_PCM_GETOPTR SNDCTL_DSP_GETOPTR
-#define SOUND_PCM_MAPINBUF SNDCTL_DSP_MAPINBUF
-#define SOUND_PCM_MAPOUTBUF SNDCTL_DSP_MAPOUTBUF
-
-/*
- * ioctl calls to be used in communication with coprocessors and
- * DSP chips.
- */
-
-typedef struct copr_buffer {
- int command; /* Set to 0 if not used */
- int flags;
-#define CPF_NONE 0x0000
-#define CPF_FIRST 0x0001 /* First block */
-#define CPF_LAST 0x0002 /* Last block */
- int len;
- int offs; /* If required by the device (0 if not used) */
-
- unsigned char data[4000]; /* NOTE! 4000 is not 4k */
- } copr_buffer;
-
-typedef struct copr_debug_buf {
- int command; /* Used internally. Set to 0 */
- int parm1;
- int parm2;
- int flags;
- int len; /* Length of data in bytes */
- } copr_debug_buf;
-
-typedef struct copr_msg {
- int len;
- unsigned char data[4000];
- } copr_msg;
-
-#define SNDCTL_COPR_RESET _SIO ('C', 0)
-#define SNDCTL_COPR_LOAD _SIOWR('C', 1, copr_buffer)
-#define SNDCTL_COPR_RDATA _SIOWR('C', 2, copr_debug_buf)
-#define SNDCTL_COPR_RCODE _SIOWR('C', 3, copr_debug_buf)
-#define SNDCTL_COPR_WDATA _SIOW ('C', 4, copr_debug_buf)
-#define SNDCTL_COPR_WCODE _SIOW ('C', 5, copr_debug_buf)
-#define SNDCTL_COPR_RUN _SIOWR('C', 6, copr_debug_buf)
-#define SNDCTL_COPR_HALT _SIOWR('C', 7, copr_debug_buf)
-#define SNDCTL_COPR_SENDMSG _SIOWR('C', 8, copr_msg)
-#define SNDCTL_COPR_RCVMSG _SIOR ('C', 9, copr_msg)
-
-/*********************************************
- * IOCTL commands for /dev/mixer
- */
-
-/*
- * Mixer devices
- *
- * There can be up to 20 different analog mixer channels. The
- * SOUND_MIXER_NRDEVICES gives the currently supported maximum.
- * The SOUND_MIXER_READ_DEVMASK returns a bitmask which tells
- * the devices supported by the particular mixer.
- */
-
-#define SOUND_MIXER_NRDEVICES 25
-#define SOUND_MIXER_VOLUME 0
-#define SOUND_MIXER_BASS 1
-#define SOUND_MIXER_TREBLE 2
-#define SOUND_MIXER_SYNTH 3
-#define SOUND_MIXER_PCM 4
-#define SOUND_MIXER_SPEAKER 5
-#define SOUND_MIXER_LINE 6
-#define SOUND_MIXER_MIC 7
-#define SOUND_MIXER_CD 8
-#define SOUND_MIXER_IMIX 9 /* Recording monitor */
-#define SOUND_MIXER_ALTPCM 10
-#define SOUND_MIXER_RECLEV 11 /* Recording level */
-#define SOUND_MIXER_IGAIN 12 /* Input gain */
-#define SOUND_MIXER_OGAIN 13 /* Output gain */
-/*
- * The AD1848 codec and compatibles have three line level inputs
- * (line, aux1 and aux2). Since each card manufacturer have assigned
- * different meanings to these inputs, it's inpractical to assign
- * specific meanings (line, cd, synth etc.) to them.
- */
-#define SOUND_MIXER_LINE1 14 /* Input source 1 (aux1) */
-#define SOUND_MIXER_LINE2 15 /* Input source 2 (aux2) */
-#define SOUND_MIXER_LINE3 16 /* Input source 3 (line) */
-#define SOUND_MIXER_DIGITAL1 17 /* Digital (input) 1 */
-#define SOUND_MIXER_DIGITAL2 18 /* Digital (input) 2 */
-#define SOUND_MIXER_DIGITAL3 19 /* Digital (input) 3 */
-#define SOUND_MIXER_PHONEIN 20 /* Phone input */
-#define SOUND_MIXER_PHONEOUT 21 /* Phone output */
-#define SOUND_MIXER_VIDEO 22 /* Video/TV (audio) in */
-#define SOUND_MIXER_RADIO 23 /* Radio in */
-#define SOUND_MIXER_MONITOR 24 /* Monitor (usually mic) volume */
-
-/* Some on/off settings (SOUND_SPECIAL_MIN - SOUND_SPECIAL_MAX) */
-/* Not counted to SOUND_MIXER_NRDEVICES, but use the same number space */
-#define SOUND_ONOFF_MIN 28
-#define SOUND_ONOFF_MAX 30
-
-/* Note! Number 31 cannot be used since the sign bit is reserved */
-#define SOUND_MIXER_NONE 31
-
-/*
- * The following unsupported macros are no longer functional.
- * Use SOUND_MIXER_PRIVATE# macros in future.
- */
-#define SOUND_MIXER_ENHANCE SOUND_MIXER_NONE
-#define SOUND_MIXER_MUTE SOUND_MIXER_NONE
-#define SOUND_MIXER_LOUD SOUND_MIXER_NONE
-
-
-#define SOUND_DEVICE_LABELS {"Vol ", "Bass ", "Trebl", "Synth", "Pcm ", "Spkr ", "Line ", \
- "Mic ", "CD ", "Mix ", "Pcm2 ", "Rec ", "IGain", "OGain", \
- "Line1", "Line2", "Line3", "Digital1", "Digital2", "Digital3", \
- "PhoneIn", "PhoneOut", "Video", "Radio", "Monitor"}
-
-#define SOUND_DEVICE_NAMES {"vol", "bass", "treble", "synth", "pcm", "speaker", "line", \
- "mic", "cd", "mix", "pcm2", "rec", "igain", "ogain", \
- "line1", "line2", "line3", "dig1", "dig2", "dig3", \
- "phin", "phout", "video", "radio", "monitor"}
-
-/* Device bitmask identifiers */
-
-#define SOUND_MIXER_RECSRC 0xff /* Arg contains a bit for each recording source */
-#define SOUND_MIXER_DEVMASK 0xfe /* Arg contains a bit for each supported device */
-#define SOUND_MIXER_RECMASK 0xfd /* Arg contains a bit for each supported recording source */
-#define SOUND_MIXER_CAPS 0xfc
-# define SOUND_CAP_EXCL_INPUT 0x00000001 /* Only one recording source at a time */
-#define SOUND_MIXER_STEREODEVS 0xfb /* Mixer channels supporting stereo */
-#define SOUND_MIXER_OUTSRC 0xfa /* Arg contains a bit for each input source to output */
-#define SOUND_MIXER_OUTMASK 0xf9 /* Arg contains a bit for each supported input source to output */
-
-/* Device mask bits */
-
-#define SOUND_MASK_VOLUME (1 << SOUND_MIXER_VOLUME)
-#define SOUND_MASK_BASS (1 << SOUND_MIXER_BASS)
-#define SOUND_MASK_TREBLE (1 << SOUND_MIXER_TREBLE)
-#define SOUND_MASK_SYNTH (1 << SOUND_MIXER_SYNTH)
-#define SOUND_MASK_PCM (1 << SOUND_MIXER_PCM)
-#define SOUND_MASK_SPEAKER (1 << SOUND_MIXER_SPEAKER)
-#define SOUND_MASK_LINE (1 << SOUND_MIXER_LINE)
-#define SOUND_MASK_MIC (1 << SOUND_MIXER_MIC)
-#define SOUND_MASK_CD (1 << SOUND_MIXER_CD)
-#define SOUND_MASK_IMIX (1 << SOUND_MIXER_IMIX)
-#define SOUND_MASK_ALTPCM (1 << SOUND_MIXER_ALTPCM)
-#define SOUND_MASK_RECLEV (1 << SOUND_MIXER_RECLEV)
-#define SOUND_MASK_IGAIN (1 << SOUND_MIXER_IGAIN)
-#define SOUND_MASK_OGAIN (1 << SOUND_MIXER_OGAIN)
-#define SOUND_MASK_LINE1 (1 << SOUND_MIXER_LINE1)
-#define SOUND_MASK_LINE2 (1 << SOUND_MIXER_LINE2)
-#define SOUND_MASK_LINE3 (1 << SOUND_MIXER_LINE3)
-#define SOUND_MASK_DIGITAL1 (1 << SOUND_MIXER_DIGITAL1)
-#define SOUND_MASK_DIGITAL2 (1 << SOUND_MIXER_DIGITAL2)
-#define SOUND_MASK_DIGITAL3 (1 << SOUND_MIXER_DIGITAL3)
-#define SOUND_MASK_PHONEIN (1 << SOUND_MIXER_PHONEIN)
-#define SOUND_MASK_PHONEOUT (1 << SOUND_MIXER_PHONEOUT)
-#define SOUND_MASK_RADIO (1 << SOUND_MIXER_RADIO)
-#define SOUND_MASK_VIDEO (1 << SOUND_MIXER_VIDEO)
-#define SOUND_MASK_MONITOR (1 << SOUND_MIXER_MONITOR)
-
-/* Obsolete macros */
-#define SOUND_MASK_MUTE (1 << SOUND_MIXER_MUTE)
-#define SOUND_MASK_ENHANCE (1 << SOUND_MIXER_ENHANCE)
-#define SOUND_MASK_LOUD (1 << SOUND_MIXER_LOUD)
-
-#define MIXER_READ(dev) _SIOR('M', dev, int)
-#define SOUND_MIXER_READ_VOLUME MIXER_READ(SOUND_MIXER_VOLUME)
-#define SOUND_MIXER_READ_BASS MIXER_READ(SOUND_MIXER_BASS)
-#define SOUND_MIXER_READ_TREBLE MIXER_READ(SOUND_MIXER_TREBLE)
-#define SOUND_MIXER_READ_SYNTH MIXER_READ(SOUND_MIXER_SYNTH)
-#define SOUND_MIXER_READ_PCM MIXER_READ(SOUND_MIXER_PCM)
-#define SOUND_MIXER_READ_SPEAKER MIXER_READ(SOUND_MIXER_SPEAKER)
-#define SOUND_MIXER_READ_LINE MIXER_READ(SOUND_MIXER_LINE)
-#define SOUND_MIXER_READ_MIC MIXER_READ(SOUND_MIXER_MIC)
-#define SOUND_MIXER_READ_CD MIXER_READ(SOUND_MIXER_CD)
-#define SOUND_MIXER_READ_IMIX MIXER_READ(SOUND_MIXER_IMIX)
-#define SOUND_MIXER_READ_ALTPCM MIXER_READ(SOUND_MIXER_ALTPCM)
-#define SOUND_MIXER_READ_RECLEV MIXER_READ(SOUND_MIXER_RECLEV)
-#define SOUND_MIXER_READ_IGAIN MIXER_READ(SOUND_MIXER_IGAIN)
-#define SOUND_MIXER_READ_OGAIN MIXER_READ(SOUND_MIXER_OGAIN)
-#define SOUND_MIXER_READ_LINE1 MIXER_READ(SOUND_MIXER_LINE1)
-#define SOUND_MIXER_READ_LINE2 MIXER_READ(SOUND_MIXER_LINE2)
-#define SOUND_MIXER_READ_LINE3 MIXER_READ(SOUND_MIXER_LINE3)
-
-/* Obsolete macros */
-#define SOUND_MIXER_READ_MUTE MIXER_READ(SOUND_MIXER_MUTE)
-#define SOUND_MIXER_READ_ENHANCE MIXER_READ(SOUND_MIXER_ENHANCE)
-#define SOUND_MIXER_READ_LOUD MIXER_READ(SOUND_MIXER_LOUD)
-
-#define SOUND_MIXER_READ_RECSRC MIXER_READ(SOUND_MIXER_RECSRC)
-#define SOUND_MIXER_READ_DEVMASK MIXER_READ(SOUND_MIXER_DEVMASK)
-#define SOUND_MIXER_READ_RECMASK MIXER_READ(SOUND_MIXER_RECMASK)
-#define SOUND_MIXER_READ_STEREODEVS MIXER_READ(SOUND_MIXER_STEREODEVS)
-#define SOUND_MIXER_READ_CAPS MIXER_READ(SOUND_MIXER_CAPS)
-
-#define MIXER_WRITE(dev) _SIOWR('M', dev, int)
-#define SOUND_MIXER_WRITE_VOLUME MIXER_WRITE(SOUND_MIXER_VOLUME)
-#define SOUND_MIXER_WRITE_BASS MIXER_WRITE(SOUND_MIXER_BASS)
-#define SOUND_MIXER_WRITE_TREBLE MIXER_WRITE(SOUND_MIXER_TREBLE)
-#define SOUND_MIXER_WRITE_SYNTH MIXER_WRITE(SOUND_MIXER_SYNTH)
-#define SOUND_MIXER_WRITE_PCM MIXER_WRITE(SOUND_MIXER_PCM)
-#define SOUND_MIXER_WRITE_SPEAKER MIXER_WRITE(SOUND_MIXER_SPEAKER)
-#define SOUND_MIXER_WRITE_LINE MIXER_WRITE(SOUND_MIXER_LINE)
-#define SOUND_MIXER_WRITE_MIC MIXER_WRITE(SOUND_MIXER_MIC)
-#define SOUND_MIXER_WRITE_CD MIXER_WRITE(SOUND_MIXER_CD)
-#define SOUND_MIXER_WRITE_IMIX MIXER_WRITE(SOUND_MIXER_IMIX)
-#define SOUND_MIXER_WRITE_ALTPCM MIXER_WRITE(SOUND_MIXER_ALTPCM)
-#define SOUND_MIXER_WRITE_RECLEV MIXER_WRITE(SOUND_MIXER_RECLEV)
-#define SOUND_MIXER_WRITE_IGAIN MIXER_WRITE(SOUND_MIXER_IGAIN)
-#define SOUND_MIXER_WRITE_OGAIN MIXER_WRITE(SOUND_MIXER_OGAIN)
-#define SOUND_MIXER_WRITE_LINE1 MIXER_WRITE(SOUND_MIXER_LINE1)
-#define SOUND_MIXER_WRITE_LINE2 MIXER_WRITE(SOUND_MIXER_LINE2)
-#define SOUND_MIXER_WRITE_LINE3 MIXER_WRITE(SOUND_MIXER_LINE3)
-
-/* Obsolete macros */
-#define SOUND_MIXER_WRITE_MUTE MIXER_WRITE(SOUND_MIXER_MUTE)
-#define SOUND_MIXER_WRITE_ENHANCE MIXER_WRITE(SOUND_MIXER_ENHANCE)
-#define SOUND_MIXER_WRITE_LOUD MIXER_WRITE(SOUND_MIXER_LOUD)
-
-#define SOUND_MIXER_WRITE_RECSRC MIXER_WRITE(SOUND_MIXER_RECSRC)
-
-typedef struct mixer_info
-{
- char id[16];
- char name[32];
- int modify_counter;
- int fillers[10];
-} mixer_info;
-
-typedef struct _old_mixer_info /* Obsolete */
-{
- char id[16];
- char name[32];
-} _old_mixer_info;
-
-#define SOUND_MIXER_INFO _SIOR ('M', 101, mixer_info)
-#define SOUND_OLD_MIXER_INFO _SIOR ('M', 101, _old_mixer_info)
-
-/*
- * A mechanism for accessing "proprietary" mixer features. This method
- * permits passing 128 bytes of arbitrary data between a mixer application
- * and the mixer driver. Interpretation of the record is defined by
- * the particular mixer driver.
- */
-typedef unsigned char mixer_record[128];
-
-#define SOUND_MIXER_ACCESS _SIOWR('M', 102, mixer_record)
-
-/*
- * Two ioctls for special souncard function
- */
-#define SOUND_MIXER_AGC _SIOWR('M', 103, int)
-#define SOUND_MIXER_3DSE _SIOWR('M', 104, int)
-
-/*
- * The SOUND_MIXER_PRIVATE# commands can be redefined by low level drivers.
- * These features can be used when accessing device specific features.
- */
-#define SOUND_MIXER_PRIVATE1 _SIOWR('M', 111, int)
-#define SOUND_MIXER_PRIVATE2 _SIOWR('M', 112, int)
-#define SOUND_MIXER_PRIVATE3 _SIOWR('M', 113, int)
-#define SOUND_MIXER_PRIVATE4 _SIOWR('M', 114, int)
-#define SOUND_MIXER_PRIVATE5 _SIOWR('M', 115, int)
-
-/*
- * SOUND_MIXER_GETLEVELS and SOUND_MIXER_SETLEVELS calls can be used
- * for querying current mixer settings from the driver and for loading
- * default volume settings _prior_ activating the mixer (loading
- * doesn't affect current state of the mixer hardware). These calls
- * are for internal use only.
- */
-
-typedef struct mixer_vol_table {
- int num; /* Index to volume table */
- char name[32];
- int levels[32];
-} mixer_vol_table;
-
-#define SOUND_MIXER_GETLEVELS _SIOWR('M', 116, mixer_vol_table)
-#define SOUND_MIXER_SETLEVELS _SIOWR('M', 117, mixer_vol_table)
-
-/*
- * An ioctl for identifying the driver version. It will return value
- * of the SOUND_VERSION macro used when compiling the driver.
- * This call was introduced in OSS version 3.6 and it will not work
- * with earlier versions (returns EINVAL).
- */
-#define OSS_GETVERSION _SIOR ('M', 118, int)
-
-/*
- * Level 2 event types for /dev/sequencer
- */
-
-/*
- * The 4 most significant bits of byte 0 specify the class of
- * the event:
- *
- * 0x8X = system level events,
- * 0x9X = device/port specific events, event[1] = device/port,
- * The last 4 bits give the subtype:
- * 0x02 = Channel event (event[3] = chn).
- * 0x01 = note event (event[4] = note).
- * (0x01 is not used alone but always with bit 0x02).
- * event[2] = MIDI message code (0x80=note off etc.)
- *
- */
-
-#define EV_SEQ_LOCAL 0x80
-#define EV_TIMING 0x81
-#define EV_CHN_COMMON 0x92
-#define EV_CHN_VOICE 0x93
-#define EV_SYSEX 0x94
-/*
- * Event types 200 to 220 are reserved for application use.
- * These numbers will not be used by the driver.
- */
-
-/*
- * Events for event type EV_CHN_VOICE
- */
-
-#define MIDI_NOTEOFF 0x80
-#define MIDI_NOTEON 0x90
-#define MIDI_KEY_PRESSURE 0xA0
-
-/*
- * Events for event type EV_CHN_COMMON
- */
-
-#define MIDI_CTL_CHANGE 0xB0
-#define MIDI_PGM_CHANGE 0xC0
-#define MIDI_CHN_PRESSURE 0xD0
-#define MIDI_PITCH_BEND 0xE0
-
-#define MIDI_SYSTEM_PREFIX 0xF0
-
-/*
- * Timer event types
- */
-#define TMR_WAIT_REL 1 /* Time relative to the prev time */
-#define TMR_WAIT_ABS 2 /* Absolute time since TMR_START */
-#define TMR_STOP 3
-#define TMR_START 4
-#define TMR_CONTINUE 5
-#define TMR_TEMPO 6
-#define TMR_ECHO 8
-#define TMR_CLOCK 9 /* MIDI clock */
-#define TMR_SPP 10 /* Song position pointer */
-#define TMR_TIMESIG 11 /* Time signature */
-
-/*
- * Local event types
- */
-#define LOCL_STARTAUDIO 1
-
-#if !defined(__KERNEL__) || defined(USE_SEQ_MACROS)
-/*
- * Some convenience macros to simplify programming of the
- * /dev/sequencer interface
- *
- * This is a legacy interface for applications written against
- * the OSSlib-3.8 style interface. It is no longer possible
- * to actually link against OSSlib with this header, but we
- * still provide these macros for programs using them.
- *
- * If you want to use OSSlib, it is recommended that you get
- * the GPL version of OSS-4.x and build against that version
- * of the header.
- *
- * We redefine the extern keyword so that make headers_check
- * does not complain about SEQ_USE_EXTBUF.
- */
-#define SEQ_DECLAREBUF() SEQ_USE_EXTBUF()
-
-void seqbuf_dump(void); /* This function must be provided by programs */
-
-#define SEQ_PM_DEFINES int __foo_bar___
-
-#define SEQ_LOAD_GMINSTR(dev, instr)
-#define SEQ_LOAD_GMDRUM(dev, drum)
-
-#define _SEQ_EXTERN extern
-#define SEQ_USE_EXTBUF() \
- _SEQ_EXTERN unsigned char _seqbuf[]; \
- _SEQ_EXTERN int _seqbuflen; _SEQ_EXTERN int _seqbufptr
-
-#ifndef USE_SIMPLE_MACROS
-/* Sample seqbuf_dump() implementation:
- *
- * SEQ_DEFINEBUF (2048); -- Defines a buffer for 2048 bytes
- *
- * int seqfd; -- The file descriptor for /dev/sequencer.
- *
- * void
- * seqbuf_dump ()
- * {
- * if (_seqbufptr)
- * if (write (seqfd, _seqbuf, _seqbufptr) == -1)
- * {
- * perror ("write /dev/sequencer");
- * exit (-1);
- * }
- * _seqbufptr = 0;
- * }
- */
-
-#define SEQ_DEFINEBUF(len) unsigned char _seqbuf[len]; int _seqbuflen = len;int _seqbufptr = 0
-#define _SEQ_NEEDBUF(len) if ((_seqbufptr+(len)) > _seqbuflen) seqbuf_dump()
-#define _SEQ_ADVBUF(len) _seqbufptr += len
-#define SEQ_DUMPBUF seqbuf_dump
-#else
-/*
- * This variation of the sequencer macros is used just to format one event
- * using fixed buffer.
- *
- * The program using the macro library must define the following macros before
- * using this library.
- *
- * #define _seqbuf name of the buffer (unsigned char[])
- * #define _SEQ_ADVBUF(len) If the applic needs to know the exact
- * size of the event, this macro can be used.
- * Otherwise this must be defined as empty.
- * #define _seqbufptr Define the name of index variable or 0 if
- * not required.
- */
-#define _SEQ_NEEDBUF(len) /* empty */
-#endif
-
-#define SEQ_VOLUME_MODE(dev, mode) {_SEQ_NEEDBUF(8);\
- _seqbuf[_seqbufptr] = SEQ_EXTENDED;\
- _seqbuf[_seqbufptr+1] = SEQ_VOLMODE;\
- _seqbuf[_seqbufptr+2] = (dev);\
- _seqbuf[_seqbufptr+3] = (mode);\
- _seqbuf[_seqbufptr+4] = 0;\
- _seqbuf[_seqbufptr+5] = 0;\
- _seqbuf[_seqbufptr+6] = 0;\
- _seqbuf[_seqbufptr+7] = 0;\
- _SEQ_ADVBUF(8);}
-
-/*
- * Midi voice messages
- */
-
-#define _CHN_VOICE(dev, event, chn, note, parm) \
- {_SEQ_NEEDBUF(8);\
- _seqbuf[_seqbufptr] = EV_CHN_VOICE;\
- _seqbuf[_seqbufptr+1] = (dev);\
- _seqbuf[_seqbufptr+2] = (event);\
- _seqbuf[_seqbufptr+3] = (chn);\
- _seqbuf[_seqbufptr+4] = (note);\
- _seqbuf[_seqbufptr+5] = (parm);\
- _seqbuf[_seqbufptr+6] = (0);\
- _seqbuf[_seqbufptr+7] = 0;\
- _SEQ_ADVBUF(8);}
-
-#define SEQ_START_NOTE(dev, chn, note, vol) \
- _CHN_VOICE(dev, MIDI_NOTEON, chn, note, vol)
-
-#define SEQ_STOP_NOTE(dev, chn, note, vol) \
- _CHN_VOICE(dev, MIDI_NOTEOFF, chn, note, vol)
-
-#define SEQ_KEY_PRESSURE(dev, chn, note, pressure) \
- _CHN_VOICE(dev, MIDI_KEY_PRESSURE, chn, note, pressure)
-
-/*
- * Midi channel messages
- */
-
-#define _CHN_COMMON(dev, event, chn, p1, p2, w14) \
- {_SEQ_NEEDBUF(8);\
- _seqbuf[_seqbufptr] = EV_CHN_COMMON;\
- _seqbuf[_seqbufptr+1] = (dev);\
- _seqbuf[_seqbufptr+2] = (event);\
- _seqbuf[_seqbufptr+3] = (chn);\
- _seqbuf[_seqbufptr+4] = (p1);\
- _seqbuf[_seqbufptr+5] = (p2);\
- *(short *)&_seqbuf[_seqbufptr+6] = (w14);\
- _SEQ_ADVBUF(8);}
-/*
- * SEQ_SYSEX permits sending of sysex messages. (It may look that it permits
- * sending any MIDI bytes but it's absolutely not possible. Trying to do
- * so _will_ cause problems with MPU401 intelligent mode).
- *
- * Sysex messages are sent in blocks of 1 to 6 bytes. Longer messages must be
- * sent by calling SEQ_SYSEX() several times (there must be no other events
- * between them). First sysex fragment must have 0xf0 in the first byte
- * and the last byte (buf[len-1] of the last fragment must be 0xf7. No byte
- * between these sysex start and end markers cannot be larger than 0x7f. Also
- * lengths of each fragments (except the last one) must be 6.
- *
- * Breaking the above rules may work with some MIDI ports but is likely to
- * cause fatal problems with some other devices (such as MPU401).
- */
-#define SEQ_SYSEX(dev, buf, len) \
- {int ii, ll=(len); \
- unsigned char *bufp=buf;\
- if (ll>6)ll=6;\
- _SEQ_NEEDBUF(8);\
- _seqbuf[_seqbufptr] = EV_SYSEX;\
- _seqbuf[_seqbufptr+1] = (dev);\
- for(ii=0;ii<ll;ii++)\
- _seqbuf[_seqbufptr+ii+2] = bufp[ii];\
- for(ii=ll;ii<6;ii++)\
- _seqbuf[_seqbufptr+ii+2] = 0xff;\
- _SEQ_ADVBUF(8);}
-
-#define SEQ_CHN_PRESSURE(dev, chn, pressure) \
- _CHN_COMMON(dev, MIDI_CHN_PRESSURE, chn, pressure, 0, 0)
-
-#define SEQ_SET_PATCH SEQ_PGM_CHANGE
-#define SEQ_PGM_CHANGE(dev, chn, patch) \
- _CHN_COMMON(dev, MIDI_PGM_CHANGE, chn, patch, 0, 0)
-
-#define SEQ_CONTROL(dev, chn, controller, value) \
- _CHN_COMMON(dev, MIDI_CTL_CHANGE, chn, controller, 0, value)
-
-#define SEQ_BENDER(dev, chn, value) \
- _CHN_COMMON(dev, MIDI_PITCH_BEND, chn, 0, 0, value)
-
-
-#define SEQ_V2_X_CONTROL(dev, voice, controller, value) {_SEQ_NEEDBUF(8);\
- _seqbuf[_seqbufptr] = SEQ_EXTENDED;\
- _seqbuf[_seqbufptr+1] = SEQ_CONTROLLER;\
- _seqbuf[_seqbufptr+2] = (dev);\
- _seqbuf[_seqbufptr+3] = (voice);\
- _seqbuf[_seqbufptr+4] = (controller);\
- _seqbuf[_seqbufptr+5] = ((value)&0xff);\
- _seqbuf[_seqbufptr+6] = ((value>>8)&0xff);\
- _seqbuf[_seqbufptr+7] = 0;\
- _SEQ_ADVBUF(8);}
-/*
- * The following 5 macros are incorrectly implemented and obsolete.
- * Use SEQ_BENDER and SEQ_CONTROL (with proper controller) instead.
- */
-#define SEQ_PITCHBEND(dev, voice, value) SEQ_V2_X_CONTROL(dev, voice, CTRL_PITCH_BENDER, value)
-#define SEQ_BENDER_RANGE(dev, voice, value) SEQ_V2_X_CONTROL(dev, voice, CTRL_PITCH_BENDER_RANGE, value)
-#define SEQ_EXPRESSION(dev, voice, value) SEQ_CONTROL(dev, voice, CTL_EXPRESSION, value*128)
-#define SEQ_MAIN_VOLUME(dev, voice, value) SEQ_CONTROL(dev, voice, CTL_MAIN_VOLUME, (value*16383)/100)
-#define SEQ_PANNING(dev, voice, pos) SEQ_CONTROL(dev, voice, CTL_PAN, (pos+128) / 2)
-
-/*
- * Timing and synchronization macros
- */
-
-#define _TIMER_EVENT(ev, parm) {_SEQ_NEEDBUF(8);\
- _seqbuf[_seqbufptr+0] = EV_TIMING; \
- _seqbuf[_seqbufptr+1] = (ev); \
- _seqbuf[_seqbufptr+2] = 0;\
- _seqbuf[_seqbufptr+3] = 0;\
- *(unsigned int *)&_seqbuf[_seqbufptr+4] = (parm); \
- _SEQ_ADVBUF(8);}
-
-#define SEQ_START_TIMER() _TIMER_EVENT(TMR_START, 0)
-#define SEQ_STOP_TIMER() _TIMER_EVENT(TMR_STOP, 0)
-#define SEQ_CONTINUE_TIMER() _TIMER_EVENT(TMR_CONTINUE, 0)
-#define SEQ_WAIT_TIME(ticks) _TIMER_EVENT(TMR_WAIT_ABS, ticks)
-#define SEQ_DELTA_TIME(ticks) _TIMER_EVENT(TMR_WAIT_REL, ticks)
-#define SEQ_ECHO_BACK(key) _TIMER_EVENT(TMR_ECHO, key)
-#define SEQ_SET_TEMPO(value) _TIMER_EVENT(TMR_TEMPO, value)
-#define SEQ_SONGPOS(pos) _TIMER_EVENT(TMR_SPP, pos)
-#define SEQ_TIME_SIGNATURE(sig) _TIMER_EVENT(TMR_TIMESIG, sig)
-
-/*
- * Local control events
- */
-
-#define _LOCAL_EVENT(ev, parm) {_SEQ_NEEDBUF(8);\
- _seqbuf[_seqbufptr+0] = EV_SEQ_LOCAL; \
- _seqbuf[_seqbufptr+1] = (ev); \
- _seqbuf[_seqbufptr+2] = 0;\
- _seqbuf[_seqbufptr+3] = 0;\
- *(unsigned int *)&_seqbuf[_seqbufptr+4] = (parm); \
- _SEQ_ADVBUF(8);}
-
-#define SEQ_PLAYAUDIO(devmask) _LOCAL_EVENT(LOCL_STARTAUDIO, devmask)
-/*
- * Events for the level 1 interface only
- */
-
-#define SEQ_MIDIOUT(device, byte) {_SEQ_NEEDBUF(4);\
- _seqbuf[_seqbufptr] = SEQ_MIDIPUTC;\
- _seqbuf[_seqbufptr+1] = (byte);\
- _seqbuf[_seqbufptr+2] = (device);\
- _seqbuf[_seqbufptr+3] = 0;\
- _SEQ_ADVBUF(4);}
-
-/*
- * Patch loading.
- */
-#define SEQ_WRPATCH(patchx, len) \
- {if (_seqbufptr) SEQ_DUMPBUF();\
- if (write(seqfd, (char*)(patchx), len)==-1) \
- perror("Write patch: /dev/sequencer");}
-#define SEQ_WRPATCH2(patchx, len) \
- (SEQ_DUMPBUF(), write(seqfd, (char*)(patchx), len))
-
-#endif
#endif
diff --git a/include/linux/stat.h b/include/linux/stat.h
index 4613240..075cb0c 100644
--- a/include/linux/stat.h
+++ b/include/linux/stat.h
@@ -1,52 +1,10 @@
#ifndef _LINUX_STAT_H
#define _LINUX_STAT_H
-#ifdef __KERNEL__
#include <asm/stat.h>
+#include <uapi/linux/stat.h>
-#endif
-
-#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
-
-#define S_IFMT 00170000
-#define S_IFSOCK 0140000
-#define S_IFLNK 0120000
-#define S_IFREG 0100000
-#define S_IFBLK 0060000
-#define S_IFDIR 0040000
-#define S_IFCHR 0020000
-#define S_IFIFO 0010000
-#define S_ISUID 0004000
-#define S_ISGID 0002000
-#define S_ISVTX 0001000
-
-#define S_ISLNK(m) (((m) & S_IFMT) == S_IFLNK)
-#define S_ISREG(m) (((m) & S_IFMT) == S_IFREG)
-#define S_ISDIR(m) (((m) & S_IFMT) == S_IFDIR)
-#define S_ISCHR(m) (((m) & S_IFMT) == S_IFCHR)
-#define S_ISBLK(m) (((m) & S_IFMT) == S_IFBLK)
-#define S_ISFIFO(m) (((m) & S_IFMT) == S_IFIFO)
-#define S_ISSOCK(m) (((m) & S_IFMT) == S_IFSOCK)
-
-#define S_IRWXU 00700
-#define S_IRUSR 00400
-#define S_IWUSR 00200
-#define S_IXUSR 00100
-
-#define S_IRWXG 00070
-#define S_IRGRP 00040
-#define S_IWGRP 00020
-#define S_IXGRP 00010
-
-#define S_IRWXO 00007
-#define S_IROTH 00004
-#define S_IWOTH 00002
-#define S_IXOTH 00001
-
-#endif
-
-#ifdef __KERNEL__
#define S_IRWXUGO (S_IRWXU|S_IRWXG|S_IRWXO)
#define S_IALLUGO (S_ISUID|S_ISGID|S_ISVTX|S_IRWXUGO)
#define S_IRUGO (S_IRUSR|S_IRGRP|S_IROTH)
@@ -77,5 +35,3 @@
};
#endif
-
-#endif
diff --git a/include/linux/stddef.h b/include/linux/stddef.h
index 1747b67..f4aec0e 100644
--- a/include/linux/stddef.h
+++ b/include/linux/stddef.h
@@ -1,9 +1,8 @@
#ifndef _LINUX_STDDEF_H
#define _LINUX_STDDEF_H
-#include <linux/compiler.h>
+#include <uapi/linux/stddef.h>
-#ifdef __KERNEL__
#undef NULL
#define NULL ((void *)0)
@@ -19,6 +18,4 @@
#else
#define offsetof(TYPE, MEMBER) ((size_t) &((TYPE *)0)->MEMBER)
#endif
-#endif /* __KERNEL__ */
-
#endif
diff --git a/include/linux/string.h b/include/linux/string.h
index b917881..63012581 100644
--- a/include/linux/string.h
+++ b/include/linux/string.h
@@ -1,16 +1,12 @@
#ifndef _LINUX_STRING_H_
#define _LINUX_STRING_H_
-/* We don't want strings.h stuff being used by user stuff by accident */
-
-#ifndef __KERNEL__
-#include <string.h>
-#else
#include <linux/compiler.h> /* for inline */
#include <linux/types.h> /* for size_t */
#include <linux/stddef.h> /* for NULL */
#include <stdarg.h>
+#include <uapi/linux/string.h>
extern char *strndup_user(const char __user *, long);
extern void *memdup_user(const void __user *, size_t);
@@ -147,5 +143,4 @@
extern size_t memweight(const void *ptr, size_t bytes);
-#endif /* __KERNEL__ */
#endif /* _LINUX_STRING_H_ */
diff --git a/include/linux/swab.h b/include/linux/swab.h
index ea0c02f..9ad3c60 100644
--- a/include/linux/swab.h
+++ b/include/linux/swab.h
@@ -1,284 +1,8 @@
#ifndef _LINUX_SWAB_H
#define _LINUX_SWAB_H
-#include <linux/types.h>
-#include <linux/compiler.h>
-#include <asm/swab.h>
+#include <uapi/linux/swab.h>
-/*
- * casts are necessary for constants, because we never know how for sure
- * how U/UL/ULL map to __u16, __u32, __u64. At least not in a portable way.
- */
-#define ___constant_swab16(x) ((__u16)( \
- (((__u16)(x) & (__u16)0x00ffU) << 8) | \
- (((__u16)(x) & (__u16)0xff00U) >> 8)))
-
-#define ___constant_swab32(x) ((__u32)( \
- (((__u32)(x) & (__u32)0x000000ffUL) << 24) | \
- (((__u32)(x) & (__u32)0x0000ff00UL) << 8) | \
- (((__u32)(x) & (__u32)0x00ff0000UL) >> 8) | \
- (((__u32)(x) & (__u32)0xff000000UL) >> 24)))
-
-#define ___constant_swab64(x) ((__u64)( \
- (((__u64)(x) & (__u64)0x00000000000000ffULL) << 56) | \
- (((__u64)(x) & (__u64)0x000000000000ff00ULL) << 40) | \
- (((__u64)(x) & (__u64)0x0000000000ff0000ULL) << 24) | \
- (((__u64)(x) & (__u64)0x00000000ff000000ULL) << 8) | \
- (((__u64)(x) & (__u64)0x000000ff00000000ULL) >> 8) | \
- (((__u64)(x) & (__u64)0x0000ff0000000000ULL) >> 24) | \
- (((__u64)(x) & (__u64)0x00ff000000000000ULL) >> 40) | \
- (((__u64)(x) & (__u64)0xff00000000000000ULL) >> 56)))
-
-#define ___constant_swahw32(x) ((__u32)( \
- (((__u32)(x) & (__u32)0x0000ffffUL) << 16) | \
- (((__u32)(x) & (__u32)0xffff0000UL) >> 16)))
-
-#define ___constant_swahb32(x) ((__u32)( \
- (((__u32)(x) & (__u32)0x00ff00ffUL) << 8) | \
- (((__u32)(x) & (__u32)0xff00ff00UL) >> 8)))
-
-/*
- * Implement the following as inlines, but define the interface using
- * macros to allow constant folding when possible:
- * ___swab16, ___swab32, ___swab64, ___swahw32, ___swahb32
- */
-
-static inline __attribute_const__ __u16 __fswab16(__u16 val)
-{
-#ifdef __arch_swab16
- return __arch_swab16(val);
-#else
- return ___constant_swab16(val);
-#endif
-}
-
-static inline __attribute_const__ __u32 __fswab32(__u32 val)
-{
-#ifdef __arch_swab32
- return __arch_swab32(val);
-#else
- return ___constant_swab32(val);
-#endif
-}
-
-static inline __attribute_const__ __u64 __fswab64(__u64 val)
-{
-#ifdef __arch_swab64
- return __arch_swab64(val);
-#elif defined(__SWAB_64_THRU_32__)
- __u32 h = val >> 32;
- __u32 l = val & ((1ULL << 32) - 1);
- return (((__u64)__fswab32(l)) << 32) | ((__u64)(__fswab32(h)));
-#else
- return ___constant_swab64(val);
-#endif
-}
-
-static inline __attribute_const__ __u32 __fswahw32(__u32 val)
-{
-#ifdef __arch_swahw32
- return __arch_swahw32(val);
-#else
- return ___constant_swahw32(val);
-#endif
-}
-
-static inline __attribute_const__ __u32 __fswahb32(__u32 val)
-{
-#ifdef __arch_swahb32
- return __arch_swahb32(val);
-#else
- return ___constant_swahb32(val);
-#endif
-}
-
-/**
- * __swab16 - return a byteswapped 16-bit value
- * @x: value to byteswap
- */
-#define __swab16(x) \
- (__builtin_constant_p((__u16)(x)) ? \
- ___constant_swab16(x) : \
- __fswab16(x))
-
-/**
- * __swab32 - return a byteswapped 32-bit value
- * @x: value to byteswap
- */
-#define __swab32(x) \
- (__builtin_constant_p((__u32)(x)) ? \
- ___constant_swab32(x) : \
- __fswab32(x))
-
-/**
- * __swab64 - return a byteswapped 64-bit value
- * @x: value to byteswap
- */
-#define __swab64(x) \
- (__builtin_constant_p((__u64)(x)) ? \
- ___constant_swab64(x) : \
- __fswab64(x))
-
-/**
- * __swahw32 - return a word-swapped 32-bit value
- * @x: value to wordswap
- *
- * __swahw32(0x12340000) is 0x00001234
- */
-#define __swahw32(x) \
- (__builtin_constant_p((__u32)(x)) ? \
- ___constant_swahw32(x) : \
- __fswahw32(x))
-
-/**
- * __swahb32 - return a high and low byte-swapped 32-bit value
- * @x: value to byteswap
- *
- * __swahb32(0x12345678) is 0x34127856
- */
-#define __swahb32(x) \
- (__builtin_constant_p((__u32)(x)) ? \
- ___constant_swahb32(x) : \
- __fswahb32(x))
-
-/**
- * __swab16p - return a byteswapped 16-bit value from a pointer
- * @p: pointer to a naturally-aligned 16-bit value
- */
-static inline __u16 __swab16p(const __u16 *p)
-{
-#ifdef __arch_swab16p
- return __arch_swab16p(p);
-#else
- return __swab16(*p);
-#endif
-}
-
-/**
- * __swab32p - return a byteswapped 32-bit value from a pointer
- * @p: pointer to a naturally-aligned 32-bit value
- */
-static inline __u32 __swab32p(const __u32 *p)
-{
-#ifdef __arch_swab32p
- return __arch_swab32p(p);
-#else
- return __swab32(*p);
-#endif
-}
-
-/**
- * __swab64p - return a byteswapped 64-bit value from a pointer
- * @p: pointer to a naturally-aligned 64-bit value
- */
-static inline __u64 __swab64p(const __u64 *p)
-{
-#ifdef __arch_swab64p
- return __arch_swab64p(p);
-#else
- return __swab64(*p);
-#endif
-}
-
-/**
- * __swahw32p - return a wordswapped 32-bit value from a pointer
- * @p: pointer to a naturally-aligned 32-bit value
- *
- * See __swahw32() for details of wordswapping.
- */
-static inline __u32 __swahw32p(const __u32 *p)
-{
-#ifdef __arch_swahw32p
- return __arch_swahw32p(p);
-#else
- return __swahw32(*p);
-#endif
-}
-
-/**
- * __swahb32p - return a high and low byteswapped 32-bit value from a pointer
- * @p: pointer to a naturally-aligned 32-bit value
- *
- * See __swahb32() for details of high/low byteswapping.
- */
-static inline __u32 __swahb32p(const __u32 *p)
-{
-#ifdef __arch_swahb32p
- return __arch_swahb32p(p);
-#else
- return __swahb32(*p);
-#endif
-}
-
-/**
- * __swab16s - byteswap a 16-bit value in-place
- * @p: pointer to a naturally-aligned 16-bit value
- */
-static inline void __swab16s(__u16 *p)
-{
-#ifdef __arch_swab16s
- __arch_swab16s(p);
-#else
- *p = __swab16p(p);
-#endif
-}
-/**
- * __swab32s - byteswap a 32-bit value in-place
- * @p: pointer to a naturally-aligned 32-bit value
- */
-static inline void __swab32s(__u32 *p)
-{
-#ifdef __arch_swab32s
- __arch_swab32s(p);
-#else
- *p = __swab32p(p);
-#endif
-}
-
-/**
- * __swab64s - byteswap a 64-bit value in-place
- * @p: pointer to a naturally-aligned 64-bit value
- */
-static inline void __swab64s(__u64 *p)
-{
-#ifdef __arch_swab64s
- __arch_swab64s(p);
-#else
- *p = __swab64p(p);
-#endif
-}
-
-/**
- * __swahw32s - wordswap a 32-bit value in-place
- * @p: pointer to a naturally-aligned 32-bit value
- *
- * See __swahw32() for details of wordswapping
- */
-static inline void __swahw32s(__u32 *p)
-{
-#ifdef __arch_swahw32s
- __arch_swahw32s(p);
-#else
- *p = __swahw32p(p);
-#endif
-}
-
-/**
- * __swahb32s - high and low byteswap a 32-bit value in-place
- * @p: pointer to a naturally-aligned 32-bit value
- *
- * See __swahb32() for details of high and low byte swapping
- */
-static inline void __swahb32s(__u32 *p)
-{
-#ifdef __arch_swahb32s
- __arch_swahb32s(p);
-#else
- *p = __swahb32p(p);
-#endif
-}
-
-#ifdef __KERNEL__
# define swab16 __swab16
# define swab32 __swab32
# define swab64 __swab64
@@ -294,6 +18,4 @@
# define swab64s __swab64s
# define swahw32s __swahw32s
# define swahb32s __swahb32s
-#endif /* __KERNEL__ */
-
#endif /* _LINUX_SWAB_H */
diff --git a/include/linux/synclink.h b/include/linux/synclink.h
index 2e7d81c..f1405b1 100644
--- a/include/linux/synclink.h
+++ b/include/linux/synclink.h
@@ -8,295 +8,11 @@
* Redistribution of this file is permitted under
* the terms of the GNU Public License (GPL)
*/
-
#ifndef _SYNCLINK_H_
#define _SYNCLINK_H_
-#define SYNCLINK_H_VERSION 3.6
-#include <linux/types.h>
+#include <uapi/linux/synclink.h>
-#define BIT0 0x0001
-#define BIT1 0x0002
-#define BIT2 0x0004
-#define BIT3 0x0008
-#define BIT4 0x0010
-#define BIT5 0x0020
-#define BIT6 0x0040
-#define BIT7 0x0080
-#define BIT8 0x0100
-#define BIT9 0x0200
-#define BIT10 0x0400
-#define BIT11 0x0800
-#define BIT12 0x1000
-#define BIT13 0x2000
-#define BIT14 0x4000
-#define BIT15 0x8000
-#define BIT16 0x00010000
-#define BIT17 0x00020000
-#define BIT18 0x00040000
-#define BIT19 0x00080000
-#define BIT20 0x00100000
-#define BIT21 0x00200000
-#define BIT22 0x00400000
-#define BIT23 0x00800000
-#define BIT24 0x01000000
-#define BIT25 0x02000000
-#define BIT26 0x04000000
-#define BIT27 0x08000000
-#define BIT28 0x10000000
-#define BIT29 0x20000000
-#define BIT30 0x40000000
-#define BIT31 0x80000000
-
-
-#define HDLC_MAX_FRAME_SIZE 65535
-#define MAX_ASYNC_TRANSMIT 4096
-#define MAX_ASYNC_BUFFER_SIZE 4096
-
-#define ASYNC_PARITY_NONE 0
-#define ASYNC_PARITY_EVEN 1
-#define ASYNC_PARITY_ODD 2
-#define ASYNC_PARITY_SPACE 3
-
-#define HDLC_FLAG_UNDERRUN_ABORT7 0x0000
-#define HDLC_FLAG_UNDERRUN_ABORT15 0x0001
-#define HDLC_FLAG_UNDERRUN_FLAG 0x0002
-#define HDLC_FLAG_UNDERRUN_CRC 0x0004
-#define HDLC_FLAG_SHARE_ZERO 0x0010
-#define HDLC_FLAG_AUTO_CTS 0x0020
-#define HDLC_FLAG_AUTO_DCD 0x0040
-#define HDLC_FLAG_AUTO_RTS 0x0080
-#define HDLC_FLAG_RXC_DPLL 0x0100
-#define HDLC_FLAG_RXC_BRG 0x0200
-#define HDLC_FLAG_RXC_TXCPIN 0x8000
-#define HDLC_FLAG_RXC_RXCPIN 0x0000
-#define HDLC_FLAG_TXC_DPLL 0x0400
-#define HDLC_FLAG_TXC_BRG 0x0800
-#define HDLC_FLAG_TXC_TXCPIN 0x0000
-#define HDLC_FLAG_TXC_RXCPIN 0x0008
-#define HDLC_FLAG_DPLL_DIV8 0x1000
-#define HDLC_FLAG_DPLL_DIV16 0x2000
-#define HDLC_FLAG_DPLL_DIV32 0x0000
-#define HDLC_FLAG_HDLC_LOOPMODE 0x4000
-
-#define HDLC_CRC_NONE 0
-#define HDLC_CRC_16_CCITT 1
-#define HDLC_CRC_32_CCITT 2
-#define HDLC_CRC_MASK 0x00ff
-#define HDLC_CRC_RETURN_EX 0x8000
-
-#define RX_OK 0
-#define RX_CRC_ERROR 1
-
-#define HDLC_TXIDLE_FLAGS 0
-#define HDLC_TXIDLE_ALT_ZEROS_ONES 1
-#define HDLC_TXIDLE_ZEROS 2
-#define HDLC_TXIDLE_ONES 3
-#define HDLC_TXIDLE_ALT_MARK_SPACE 4
-#define HDLC_TXIDLE_SPACE 5
-#define HDLC_TXIDLE_MARK 6
-#define HDLC_TXIDLE_CUSTOM_8 0x10000000
-#define HDLC_TXIDLE_CUSTOM_16 0x20000000
-
-#define HDLC_ENCODING_NRZ 0
-#define HDLC_ENCODING_NRZB 1
-#define HDLC_ENCODING_NRZI_MARK 2
-#define HDLC_ENCODING_NRZI_SPACE 3
-#define HDLC_ENCODING_NRZI HDLC_ENCODING_NRZI_SPACE
-#define HDLC_ENCODING_BIPHASE_MARK 4
-#define HDLC_ENCODING_BIPHASE_SPACE 5
-#define HDLC_ENCODING_BIPHASE_LEVEL 6
-#define HDLC_ENCODING_DIFF_BIPHASE_LEVEL 7
-
-#define HDLC_PREAMBLE_LENGTH_8BITS 0
-#define HDLC_PREAMBLE_LENGTH_16BITS 1
-#define HDLC_PREAMBLE_LENGTH_32BITS 2
-#define HDLC_PREAMBLE_LENGTH_64BITS 3
-
-#define HDLC_PREAMBLE_PATTERN_NONE 0
-#define HDLC_PREAMBLE_PATTERN_ZEROS 1
-#define HDLC_PREAMBLE_PATTERN_FLAGS 2
-#define HDLC_PREAMBLE_PATTERN_10 3
-#define HDLC_PREAMBLE_PATTERN_01 4
-#define HDLC_PREAMBLE_PATTERN_ONES 5
-
-#define MGSL_MODE_ASYNC 1
-#define MGSL_MODE_HDLC 2
-#define MGSL_MODE_MONOSYNC 3
-#define MGSL_MODE_BISYNC 4
-#define MGSL_MODE_RAW 6
-#define MGSL_MODE_BASE_CLOCK 7
-#define MGSL_MODE_XSYNC 8
-
-#define MGSL_BUS_TYPE_ISA 1
-#define MGSL_BUS_TYPE_EISA 2
-#define MGSL_BUS_TYPE_PCI 5
-
-#define MGSL_INTERFACE_MASK 0xf
-#define MGSL_INTERFACE_DISABLE 0
-#define MGSL_INTERFACE_RS232 1
-#define MGSL_INTERFACE_V35 2
-#define MGSL_INTERFACE_RS422 3
-#define MGSL_INTERFACE_RTS_EN 0x10
-#define MGSL_INTERFACE_LL 0x20
-#define MGSL_INTERFACE_RL 0x40
-#define MGSL_INTERFACE_MSB_FIRST 0x80
-
-typedef struct _MGSL_PARAMS
-{
- /* Common */
-
- unsigned long mode; /* Asynchronous or HDLC */
- unsigned char loopback; /* internal loopback mode */
-
- /* HDLC Only */
-
- unsigned short flags;
- unsigned char encoding; /* NRZ, NRZI, etc. */
- unsigned long clock_speed; /* external clock speed in bits per second */
- unsigned char addr_filter; /* receive HDLC address filter, 0xFF = disable */
- unsigned short crc_type; /* None, CRC16-CCITT, or CRC32-CCITT */
- unsigned char preamble_length;
- unsigned char preamble;
-
- /* Async Only */
-
- unsigned long data_rate; /* bits per second */
- unsigned char data_bits; /* 7 or 8 data bits */
- unsigned char stop_bits; /* 1 or 2 stop bits */
- unsigned char parity; /* none, even, or odd */
-
-} MGSL_PARAMS, *PMGSL_PARAMS;
-
-#define MICROGATE_VENDOR_ID 0x13c0
-#define SYNCLINK_DEVICE_ID 0x0010
-#define MGSCC_DEVICE_ID 0x0020
-#define SYNCLINK_SCA_DEVICE_ID 0x0030
-#define SYNCLINK_GT_DEVICE_ID 0x0070
-#define SYNCLINK_GT4_DEVICE_ID 0x0080
-#define SYNCLINK_AC_DEVICE_ID 0x0090
-#define SYNCLINK_GT2_DEVICE_ID 0x00A0
-#define MGSL_MAX_SERIAL_NUMBER 30
-
-/*
-** device diagnostics status
-*/
-
-#define DiagStatus_OK 0
-#define DiagStatus_AddressFailure 1
-#define DiagStatus_AddressConflict 2
-#define DiagStatus_IrqFailure 3
-#define DiagStatus_IrqConflict 4
-#define DiagStatus_DmaFailure 5
-#define DiagStatus_DmaConflict 6
-#define DiagStatus_PciAdapterNotFound 7
-#define DiagStatus_CantAssignPciResources 8
-#define DiagStatus_CantAssignPciMemAddr 9
-#define DiagStatus_CantAssignPciIoAddr 10
-#define DiagStatus_CantAssignPciIrq 11
-#define DiagStatus_MemoryError 12
-
-#define SerialSignal_DCD 0x01 /* Data Carrier Detect */
-#define SerialSignal_TXD 0x02 /* Transmit Data */
-#define SerialSignal_RI 0x04 /* Ring Indicator */
-#define SerialSignal_RXD 0x08 /* Receive Data */
-#define SerialSignal_CTS 0x10 /* Clear to Send */
-#define SerialSignal_RTS 0x20 /* Request to Send */
-#define SerialSignal_DSR 0x40 /* Data Set Ready */
-#define SerialSignal_DTR 0x80 /* Data Terminal Ready */
-
-
-/*
- * Counters of the input lines (CTS, DSR, RI, CD) interrupts
- */
-struct mgsl_icount {
- __u32 cts, dsr, rng, dcd, tx, rx;
- __u32 frame, parity, overrun, brk;
- __u32 buf_overrun;
- __u32 txok;
- __u32 txunder;
- __u32 txabort;
- __u32 txtimeout;
- __u32 rxshort;
- __u32 rxlong;
- __u32 rxabort;
- __u32 rxover;
- __u32 rxcrc;
- __u32 rxok;
- __u32 exithunt;
- __u32 rxidle;
-};
-
-struct gpio_desc {
- __u32 state;
- __u32 smask;
- __u32 dir;
- __u32 dmask;
-};
-
-#define DEBUG_LEVEL_DATA 1
-#define DEBUG_LEVEL_ERROR 2
-#define DEBUG_LEVEL_INFO 3
-#define DEBUG_LEVEL_BH 4
-#define DEBUG_LEVEL_ISR 5
-
-/*
-** Event bit flags for use with MgslWaitEvent
-*/
-
-#define MgslEvent_DsrActive 0x0001
-#define MgslEvent_DsrInactive 0x0002
-#define MgslEvent_Dsr 0x0003
-#define MgslEvent_CtsActive 0x0004
-#define MgslEvent_CtsInactive 0x0008
-#define MgslEvent_Cts 0x000c
-#define MgslEvent_DcdActive 0x0010
-#define MgslEvent_DcdInactive 0x0020
-#define MgslEvent_Dcd 0x0030
-#define MgslEvent_RiActive 0x0040
-#define MgslEvent_RiInactive 0x0080
-#define MgslEvent_Ri 0x00c0
-#define MgslEvent_ExitHuntMode 0x0100
-#define MgslEvent_IdleReceived 0x0200
-
-/* Private IOCTL codes:
- *
- * MGSL_IOCSPARAMS set MGSL_PARAMS structure values
- * MGSL_IOCGPARAMS get current MGSL_PARAMS structure values
- * MGSL_IOCSTXIDLE set current transmit idle mode
- * MGSL_IOCGTXIDLE get current transmit idle mode
- * MGSL_IOCTXENABLE enable or disable transmitter
- * MGSL_IOCRXENABLE enable or disable receiver
- * MGSL_IOCTXABORT abort transmitting frame (HDLC)
- * MGSL_IOCGSTATS return current statistics
- * MGSL_IOCWAITEVENT wait for specified event to occur
- * MGSL_LOOPTXDONE transmit in HDLC LoopMode done
- * MGSL_IOCSIF set the serial interface type
- * MGSL_IOCGIF get the serial interface type
- */
-#define MGSL_MAGIC_IOC 'm'
-#define MGSL_IOCSPARAMS _IOW(MGSL_MAGIC_IOC,0,struct _MGSL_PARAMS)
-#define MGSL_IOCGPARAMS _IOR(MGSL_MAGIC_IOC,1,struct _MGSL_PARAMS)
-#define MGSL_IOCSTXIDLE _IO(MGSL_MAGIC_IOC,2)
-#define MGSL_IOCGTXIDLE _IO(MGSL_MAGIC_IOC,3)
-#define MGSL_IOCTXENABLE _IO(MGSL_MAGIC_IOC,4)
-#define MGSL_IOCRXENABLE _IO(MGSL_MAGIC_IOC,5)
-#define MGSL_IOCTXABORT _IO(MGSL_MAGIC_IOC,6)
-#define MGSL_IOCGSTATS _IO(MGSL_MAGIC_IOC,7)
-#define MGSL_IOCWAITEVENT _IOWR(MGSL_MAGIC_IOC,8,int)
-#define MGSL_IOCCLRMODCOUNT _IO(MGSL_MAGIC_IOC,15)
-#define MGSL_IOCLOOPTXDONE _IO(MGSL_MAGIC_IOC,9)
-#define MGSL_IOCSIF _IO(MGSL_MAGIC_IOC,10)
-#define MGSL_IOCGIF _IO(MGSL_MAGIC_IOC,11)
-#define MGSL_IOCSGPIO _IOW(MGSL_MAGIC_IOC,16,struct gpio_desc)
-#define MGSL_IOCGGPIO _IOR(MGSL_MAGIC_IOC,17,struct gpio_desc)
-#define MGSL_IOCWAITGPIO _IOWR(MGSL_MAGIC_IOC,18,struct gpio_desc)
-#define MGSL_IOCSXSYNC _IO(MGSL_MAGIC_IOC, 19)
-#define MGSL_IOCGXSYNC _IO(MGSL_MAGIC_IOC, 20)
-#define MGSL_IOCSXCTRL _IO(MGSL_MAGIC_IOC, 21)
-#define MGSL_IOCGXCTRL _IO(MGSL_MAGIC_IOC, 22)
-
-#ifdef __KERNEL__
/* provide 32 bit ioctl compatibility on 64 bit systems */
#ifdef CONFIG_COMPAT
#include <linux/compat.h>
@@ -318,6 +34,4 @@
#define MGSL_IOCSPARAMS32 _IOW(MGSL_MAGIC_IOC,0,struct MGSL_PARAMS32)
#define MGSL_IOCGPARAMS32 _IOR(MGSL_MAGIC_IOC,1,struct MGSL_PARAMS32)
#endif
-#endif
-
#endif /* _SYNCLINK_H_ */
diff --git a/include/linux/sysctl.h b/include/linux/sysctl.h
index c34b4c8..cd844a6 100644
--- a/include/linux/sysctl.h
+++ b/include/linux/sysctl.h
@@ -18,921 +18,14 @@
****************************************************************
****************************************************************
*/
-
#ifndef _LINUX_SYSCTL_H
#define _LINUX_SYSCTL_H
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/compiler.h>
-
-struct completion;
-
-#define CTL_MAXNAME 10 /* how many path components do we allow in a
- call to sysctl? In other words, what is
- the largest acceptable value for the nlen
- member of a struct __sysctl_args to have? */
-
-struct __sysctl_args {
- int __user *name;
- int nlen;
- void __user *oldval;
- size_t __user *oldlenp;
- void __user *newval;
- size_t newlen;
- unsigned long __unused[4];
-};
-
-/* Define sysctl names first */
-
-/* Top-level names: */
-
-enum
-{
- CTL_KERN=1, /* General kernel info and control */
- CTL_VM=2, /* VM management */
- CTL_NET=3, /* Networking */
- CTL_PROC=4, /* removal breaks strace(1) compilation */
- CTL_FS=5, /* Filesystems */
- CTL_DEBUG=6, /* Debugging */
- CTL_DEV=7, /* Devices */
- CTL_BUS=8, /* Busses */
- CTL_ABI=9, /* Binary emulation */
- CTL_CPU=10, /* CPU stuff (speed scaling, etc) */
- CTL_ARLAN=254, /* arlan wireless driver */
- CTL_S390DBF=5677, /* s390 debug */
- CTL_SUNRPC=7249, /* sunrpc debug */
- CTL_PM=9899, /* frv power management */
- CTL_FRV=9898, /* frv specific sysctls */
-};
-
-/* CTL_BUS names: */
-enum
-{
- CTL_BUS_ISA=1 /* ISA */
-};
-
-/* /proc/sys/fs/inotify/ */
-enum
-{
- INOTIFY_MAX_USER_INSTANCES=1, /* max instances per user */
- INOTIFY_MAX_USER_WATCHES=2, /* max watches per user */
- INOTIFY_MAX_QUEUED_EVENTS=3 /* max queued events per instance */
-};
-
-/* CTL_KERN names: */
-enum
-{
- KERN_OSTYPE=1, /* string: system version */
- KERN_OSRELEASE=2, /* string: system release */
- KERN_OSREV=3, /* int: system revision */
- KERN_VERSION=4, /* string: compile time info */
- KERN_SECUREMASK=5, /* struct: maximum rights mask */
- KERN_PROF=6, /* table: profiling information */
- KERN_NODENAME=7, /* string: hostname */
- KERN_DOMAINNAME=8, /* string: domainname */
-
- KERN_PANIC=15, /* int: panic timeout */
- KERN_REALROOTDEV=16, /* real root device to mount after initrd */
-
- KERN_SPARC_REBOOT=21, /* reboot command on Sparc */
- KERN_CTLALTDEL=22, /* int: allow ctl-alt-del to reboot */
- KERN_PRINTK=23, /* struct: control printk logging parameters */
- KERN_NAMETRANS=24, /* Name translation */
- KERN_PPC_HTABRECLAIM=25, /* turn htab reclaimation on/off on PPC */
- KERN_PPC_ZEROPAGED=26, /* turn idle page zeroing on/off on PPC */
- KERN_PPC_POWERSAVE_NAP=27, /* use nap mode for power saving */
- KERN_MODPROBE=28, /* string: modprobe path */
- KERN_SG_BIG_BUFF=29, /* int: sg driver reserved buffer size */
- KERN_ACCT=30, /* BSD process accounting parameters */
- KERN_PPC_L2CR=31, /* l2cr register on PPC */
-
- KERN_RTSIGNR=32, /* Number of rt sigs queued */
- KERN_RTSIGMAX=33, /* Max queuable */
-
- KERN_SHMMAX=34, /* long: Maximum shared memory segment */
- KERN_MSGMAX=35, /* int: Maximum size of a messege */
- KERN_MSGMNB=36, /* int: Maximum message queue size */
- KERN_MSGPOOL=37, /* int: Maximum system message pool size */
- KERN_SYSRQ=38, /* int: Sysreq enable */
- KERN_MAX_THREADS=39, /* int: Maximum nr of threads in the system */
- KERN_RANDOM=40, /* Random driver */
- KERN_SHMALL=41, /* int: Maximum size of shared memory */
- KERN_MSGMNI=42, /* int: msg queue identifiers */
- KERN_SEM=43, /* struct: sysv semaphore limits */
- KERN_SPARC_STOP_A=44, /* int: Sparc Stop-A enable */
- KERN_SHMMNI=45, /* int: shm array identifiers */
- KERN_OVERFLOWUID=46, /* int: overflow UID */
- KERN_OVERFLOWGID=47, /* int: overflow GID */
- KERN_SHMPATH=48, /* string: path to shm fs */
- KERN_HOTPLUG=49, /* string: path to uevent helper (deprecated) */
- KERN_IEEE_EMULATION_WARNINGS=50, /* int: unimplemented ieee instructions */
- KERN_S390_USER_DEBUG_LOGGING=51, /* int: dumps of user faults */
- KERN_CORE_USES_PID=52, /* int: use core or core.%pid */
- KERN_TAINTED=53, /* int: various kernel tainted flags */
- KERN_CADPID=54, /* int: PID of the process to notify on CAD */
- KERN_PIDMAX=55, /* int: PID # limit */
- KERN_CORE_PATTERN=56, /* string: pattern for core-file names */
- KERN_PANIC_ON_OOPS=57, /* int: whether we will panic on an oops */
- KERN_HPPA_PWRSW=58, /* int: hppa soft-power enable */
- KERN_HPPA_UNALIGNED=59, /* int: hppa unaligned-trap enable */
- KERN_PRINTK_RATELIMIT=60, /* int: tune printk ratelimiting */
- KERN_PRINTK_RATELIMIT_BURST=61, /* int: tune printk ratelimiting */
- KERN_PTY=62, /* dir: pty driver */
- KERN_NGROUPS_MAX=63, /* int: NGROUPS_MAX */
- KERN_SPARC_SCONS_PWROFF=64, /* int: serial console power-off halt */
- KERN_HZ_TIMER=65, /* int: hz timer on or off */
- KERN_UNKNOWN_NMI_PANIC=66, /* int: unknown nmi panic flag */
- KERN_BOOTLOADER_TYPE=67, /* int: boot loader type */
- KERN_RANDOMIZE=68, /* int: randomize virtual address space */
- KERN_SETUID_DUMPABLE=69, /* int: behaviour of dumps for setuid core */
- KERN_SPIN_RETRY=70, /* int: number of spinlock retries */
- KERN_ACPI_VIDEO_FLAGS=71, /* int: flags for setting up video after ACPI sleep */
- KERN_IA64_UNALIGNED=72, /* int: ia64 unaligned userland trap enable */
- KERN_COMPAT_LOG=73, /* int: print compat layer messages */
- KERN_MAX_LOCK_DEPTH=74, /* int: rtmutex's maximum lock depth */
- KERN_NMI_WATCHDOG=75, /* int: enable/disable nmi watchdog */
- KERN_PANIC_ON_NMI=76, /* int: whether we will panic on an unrecovered */
-};
-
-
-
-/* CTL_VM names: */
-enum
-{
- VM_UNUSED1=1, /* was: struct: Set vm swapping control */
- VM_UNUSED2=2, /* was; int: Linear or sqrt() swapout for hogs */
- VM_UNUSED3=3, /* was: struct: Set free page thresholds */
- VM_UNUSED4=4, /* Spare */
- VM_OVERCOMMIT_MEMORY=5, /* Turn off the virtual memory safety limit */
- VM_UNUSED5=6, /* was: struct: Set buffer memory thresholds */
- VM_UNUSED7=7, /* was: struct: Set cache memory thresholds */
- VM_UNUSED8=8, /* was: struct: Control kswapd behaviour */
- VM_UNUSED9=9, /* was: struct: Set page table cache parameters */
- VM_PAGE_CLUSTER=10, /* int: set number of pages to swap together */
- VM_DIRTY_BACKGROUND=11, /* dirty_background_ratio */
- VM_DIRTY_RATIO=12, /* dirty_ratio */
- VM_DIRTY_WB_CS=13, /* dirty_writeback_centisecs */
- VM_DIRTY_EXPIRE_CS=14, /* dirty_expire_centisecs */
- VM_NR_PDFLUSH_THREADS=15, /* nr_pdflush_threads */
- VM_OVERCOMMIT_RATIO=16, /* percent of RAM to allow overcommit in */
- VM_PAGEBUF=17, /* struct: Control pagebuf parameters */
- VM_HUGETLB_PAGES=18, /* int: Number of available Huge Pages */
- VM_SWAPPINESS=19, /* Tendency to steal mapped memory */
- VM_LOWMEM_RESERVE_RATIO=20,/* reservation ratio for lower memory zones */
- VM_MIN_FREE_KBYTES=21, /* Minimum free kilobytes to maintain */
- VM_MAX_MAP_COUNT=22, /* int: Maximum number of mmaps/address-space */
- VM_LAPTOP_MODE=23, /* vm laptop mode */
- VM_BLOCK_DUMP=24, /* block dump mode */
- VM_HUGETLB_GROUP=25, /* permitted hugetlb group */
- VM_VFS_CACHE_PRESSURE=26, /* dcache/icache reclaim pressure */
- VM_LEGACY_VA_LAYOUT=27, /* legacy/compatibility virtual address space layout */
- VM_SWAP_TOKEN_TIMEOUT=28, /* default time for token time out */
- VM_DROP_PAGECACHE=29, /* int: nuke lots of pagecache */
- VM_PERCPU_PAGELIST_FRACTION=30,/* int: fraction of pages in each percpu_pagelist */
- VM_ZONE_RECLAIM_MODE=31, /* reclaim local zone memory before going off node */
- VM_MIN_UNMAPPED=32, /* Set min percent of unmapped pages */
- VM_PANIC_ON_OOM=33, /* panic at out-of-memory */
- VM_VDSO_ENABLED=34, /* map VDSO into new processes? */
- VM_MIN_SLAB=35, /* Percent pages ignored by zone reclaim */
-};
-
-
-/* CTL_NET names: */
-enum
-{
- NET_CORE=1,
- NET_ETHER=2,
- NET_802=3,
- NET_UNIX=4,
- NET_IPV4=5,
- NET_IPX=6,
- NET_ATALK=7,
- NET_NETROM=8,
- NET_AX25=9,
- NET_BRIDGE=10,
- NET_ROSE=11,
- NET_IPV6=12,
- NET_X25=13,
- NET_TR=14,
- NET_DECNET=15,
- NET_ECONET=16,
- NET_SCTP=17,
- NET_LLC=18,
- NET_NETFILTER=19,
- NET_DCCP=20,
- NET_IRDA=412,
-};
-
-/* /proc/sys/kernel/random */
-enum
-{
- RANDOM_POOLSIZE=1,
- RANDOM_ENTROPY_COUNT=2,
- RANDOM_READ_THRESH=3,
- RANDOM_WRITE_THRESH=4,
- RANDOM_BOOT_ID=5,
- RANDOM_UUID=6
-};
-
-/* /proc/sys/kernel/pty */
-enum
-{
- PTY_MAX=1,
- PTY_NR=2
-};
-
-/* /proc/sys/bus/isa */
-enum
-{
- BUS_ISA_MEM_BASE=1,
- BUS_ISA_PORT_BASE=2,
- BUS_ISA_PORT_SHIFT=3
-};
-
-/* /proc/sys/net/core */
-enum
-{
- NET_CORE_WMEM_MAX=1,
- NET_CORE_RMEM_MAX=2,
- NET_CORE_WMEM_DEFAULT=3,
- NET_CORE_RMEM_DEFAULT=4,
-/* was NET_CORE_DESTROY_DELAY */
- NET_CORE_MAX_BACKLOG=6,
- NET_CORE_FASTROUTE=7,
- NET_CORE_MSG_COST=8,
- NET_CORE_MSG_BURST=9,
- NET_CORE_OPTMEM_MAX=10,
- NET_CORE_HOT_LIST_LENGTH=11,
- NET_CORE_DIVERT_VERSION=12,
- NET_CORE_NO_CONG_THRESH=13,
- NET_CORE_NO_CONG=14,
- NET_CORE_LO_CONG=15,
- NET_CORE_MOD_CONG=16,
- NET_CORE_DEV_WEIGHT=17,
- NET_CORE_SOMAXCONN=18,
- NET_CORE_BUDGET=19,
- NET_CORE_AEVENT_ETIME=20,
- NET_CORE_AEVENT_RSEQTH=21,
- NET_CORE_WARNINGS=22,
-};
-
-/* /proc/sys/net/ethernet */
-
-/* /proc/sys/net/802 */
-
-/* /proc/sys/net/unix */
-
-enum
-{
- NET_UNIX_DESTROY_DELAY=1,
- NET_UNIX_DELETE_DELAY=2,
- NET_UNIX_MAX_DGRAM_QLEN=3,
-};
-
-/* /proc/sys/net/netfilter */
-enum
-{
- NET_NF_CONNTRACK_MAX=1,
- NET_NF_CONNTRACK_TCP_TIMEOUT_SYN_SENT=2,
- NET_NF_CONNTRACK_TCP_TIMEOUT_SYN_RECV=3,
- NET_NF_CONNTRACK_TCP_TIMEOUT_ESTABLISHED=4,
- NET_NF_CONNTRACK_TCP_TIMEOUT_FIN_WAIT=5,
- NET_NF_CONNTRACK_TCP_TIMEOUT_CLOSE_WAIT=6,
- NET_NF_CONNTRACK_TCP_TIMEOUT_LAST_ACK=7,
- NET_NF_CONNTRACK_TCP_TIMEOUT_TIME_WAIT=8,
- NET_NF_CONNTRACK_TCP_TIMEOUT_CLOSE=9,
- NET_NF_CONNTRACK_UDP_TIMEOUT=10,
- NET_NF_CONNTRACK_UDP_TIMEOUT_STREAM=11,
- NET_NF_CONNTRACK_ICMP_TIMEOUT=12,
- NET_NF_CONNTRACK_GENERIC_TIMEOUT=13,
- NET_NF_CONNTRACK_BUCKETS=14,
- NET_NF_CONNTRACK_LOG_INVALID=15,
- NET_NF_CONNTRACK_TCP_TIMEOUT_MAX_RETRANS=16,
- NET_NF_CONNTRACK_TCP_LOOSE=17,
- NET_NF_CONNTRACK_TCP_BE_LIBERAL=18,
- NET_NF_CONNTRACK_TCP_MAX_RETRANS=19,
- NET_NF_CONNTRACK_SCTP_TIMEOUT_CLOSED=20,
- NET_NF_CONNTRACK_SCTP_TIMEOUT_COOKIE_WAIT=21,
- NET_NF_CONNTRACK_SCTP_TIMEOUT_COOKIE_ECHOED=22,
- NET_NF_CONNTRACK_SCTP_TIMEOUT_ESTABLISHED=23,
- NET_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_SENT=24,
- NET_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_RECD=25,
- NET_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_ACK_SENT=26,
- NET_NF_CONNTRACK_COUNT=27,
- NET_NF_CONNTRACK_ICMPV6_TIMEOUT=28,
- NET_NF_CONNTRACK_FRAG6_TIMEOUT=29,
- NET_NF_CONNTRACK_FRAG6_LOW_THRESH=30,
- NET_NF_CONNTRACK_FRAG6_HIGH_THRESH=31,
- NET_NF_CONNTRACK_CHECKSUM=32,
-};
-
-/* /proc/sys/net/ipv4 */
-enum
-{
- /* v2.0 compatibile variables */
- NET_IPV4_FORWARD=8,
- NET_IPV4_DYNADDR=9,
-
- NET_IPV4_CONF=16,
- NET_IPV4_NEIGH=17,
- NET_IPV4_ROUTE=18,
- NET_IPV4_FIB_HASH=19,
- NET_IPV4_NETFILTER=20,
-
- NET_IPV4_TCP_TIMESTAMPS=33,
- NET_IPV4_TCP_WINDOW_SCALING=34,
- NET_IPV4_TCP_SACK=35,
- NET_IPV4_TCP_RETRANS_COLLAPSE=36,
- NET_IPV4_DEFAULT_TTL=37,
- NET_IPV4_AUTOCONFIG=38,
- NET_IPV4_NO_PMTU_DISC=39,
- NET_IPV4_TCP_SYN_RETRIES=40,
- NET_IPV4_IPFRAG_HIGH_THRESH=41,
- NET_IPV4_IPFRAG_LOW_THRESH=42,
- NET_IPV4_IPFRAG_TIME=43,
- NET_IPV4_TCP_MAX_KA_PROBES=44,
- NET_IPV4_TCP_KEEPALIVE_TIME=45,
- NET_IPV4_TCP_KEEPALIVE_PROBES=46,
- NET_IPV4_TCP_RETRIES1=47,
- NET_IPV4_TCP_RETRIES2=48,
- NET_IPV4_TCP_FIN_TIMEOUT=49,
- NET_IPV4_IP_MASQ_DEBUG=50,
- NET_TCP_SYNCOOKIES=51,
- NET_TCP_STDURG=52,
- NET_TCP_RFC1337=53,
- NET_TCP_SYN_TAILDROP=54,
- NET_TCP_MAX_SYN_BACKLOG=55,
- NET_IPV4_LOCAL_PORT_RANGE=56,
- NET_IPV4_ICMP_ECHO_IGNORE_ALL=57,
- NET_IPV4_ICMP_ECHO_IGNORE_BROADCASTS=58,
- NET_IPV4_ICMP_SOURCEQUENCH_RATE=59,
- NET_IPV4_ICMP_DESTUNREACH_RATE=60,
- NET_IPV4_ICMP_TIMEEXCEED_RATE=61,
- NET_IPV4_ICMP_PARAMPROB_RATE=62,
- NET_IPV4_ICMP_ECHOREPLY_RATE=63,
- NET_IPV4_ICMP_IGNORE_BOGUS_ERROR_RESPONSES=64,
- NET_IPV4_IGMP_MAX_MEMBERSHIPS=65,
- NET_TCP_TW_RECYCLE=66,
- NET_IPV4_ALWAYS_DEFRAG=67,
- NET_IPV4_TCP_KEEPALIVE_INTVL=68,
- NET_IPV4_INET_PEER_THRESHOLD=69,
- NET_IPV4_INET_PEER_MINTTL=70,
- NET_IPV4_INET_PEER_MAXTTL=71,
- NET_IPV4_INET_PEER_GC_MINTIME=72,
- NET_IPV4_INET_PEER_GC_MAXTIME=73,
- NET_TCP_ORPHAN_RETRIES=74,
- NET_TCP_ABORT_ON_OVERFLOW=75,
- NET_TCP_SYNACK_RETRIES=76,
- NET_TCP_MAX_ORPHANS=77,
- NET_TCP_MAX_TW_BUCKETS=78,
- NET_TCP_FACK=79,
- NET_TCP_REORDERING=80,
- NET_TCP_ECN=81,
- NET_TCP_DSACK=82,
- NET_TCP_MEM=83,
- NET_TCP_WMEM=84,
- NET_TCP_RMEM=85,
- NET_TCP_APP_WIN=86,
- NET_TCP_ADV_WIN_SCALE=87,
- NET_IPV4_NONLOCAL_BIND=88,
- NET_IPV4_ICMP_RATELIMIT=89,
- NET_IPV4_ICMP_RATEMASK=90,
- NET_TCP_TW_REUSE=91,
- NET_TCP_FRTO=92,
- NET_TCP_LOW_LATENCY=93,
- NET_IPV4_IPFRAG_SECRET_INTERVAL=94,
- NET_IPV4_IGMP_MAX_MSF=96,
- NET_TCP_NO_METRICS_SAVE=97,
- NET_TCP_DEFAULT_WIN_SCALE=105,
- NET_TCP_MODERATE_RCVBUF=106,
- NET_TCP_TSO_WIN_DIVISOR=107,
- NET_TCP_BIC_BETA=108,
- NET_IPV4_ICMP_ERRORS_USE_INBOUND_IFADDR=109,
- NET_TCP_CONG_CONTROL=110,
- NET_TCP_ABC=111,
- NET_IPV4_IPFRAG_MAX_DIST=112,
- NET_TCP_MTU_PROBING=113,
- NET_TCP_BASE_MSS=114,
- NET_IPV4_TCP_WORKAROUND_SIGNED_WINDOWS=115,
- NET_TCP_DMA_COPYBREAK=116,
- NET_TCP_SLOW_START_AFTER_IDLE=117,
- NET_CIPSOV4_CACHE_ENABLE=118,
- NET_CIPSOV4_CACHE_BUCKET_SIZE=119,
- NET_CIPSOV4_RBM_OPTFMT=120,
- NET_CIPSOV4_RBM_STRICTVALID=121,
- NET_TCP_AVAIL_CONG_CONTROL=122,
- NET_TCP_ALLOWED_CONG_CONTROL=123,
- NET_TCP_MAX_SSTHRESH=124,
- NET_TCP_FRTO_RESPONSE=125,
-};
-
-enum {
- NET_IPV4_ROUTE_FLUSH=1,
- NET_IPV4_ROUTE_MIN_DELAY=2, /* obsolete since 2.6.25 */
- NET_IPV4_ROUTE_MAX_DELAY=3, /* obsolete since 2.6.25 */
- NET_IPV4_ROUTE_GC_THRESH=4,
- NET_IPV4_ROUTE_MAX_SIZE=5,
- NET_IPV4_ROUTE_GC_MIN_INTERVAL=6,
- NET_IPV4_ROUTE_GC_TIMEOUT=7,
- NET_IPV4_ROUTE_GC_INTERVAL=8, /* obsolete since 2.6.38 */
- NET_IPV4_ROUTE_REDIRECT_LOAD=9,
- NET_IPV4_ROUTE_REDIRECT_NUMBER=10,
- NET_IPV4_ROUTE_REDIRECT_SILENCE=11,
- NET_IPV4_ROUTE_ERROR_COST=12,
- NET_IPV4_ROUTE_ERROR_BURST=13,
- NET_IPV4_ROUTE_GC_ELASTICITY=14,
- NET_IPV4_ROUTE_MTU_EXPIRES=15,
- NET_IPV4_ROUTE_MIN_PMTU=16,
- NET_IPV4_ROUTE_MIN_ADVMSS=17,
- NET_IPV4_ROUTE_SECRET_INTERVAL=18,
- NET_IPV4_ROUTE_GC_MIN_INTERVAL_MS=19,
-};
-
-enum
-{
- NET_PROTO_CONF_ALL=-2,
- NET_PROTO_CONF_DEFAULT=-3
-
- /* And device ifindices ... */
-};
-
-enum
-{
- NET_IPV4_CONF_FORWARDING=1,
- NET_IPV4_CONF_MC_FORWARDING=2,
- NET_IPV4_CONF_PROXY_ARP=3,
- NET_IPV4_CONF_ACCEPT_REDIRECTS=4,
- NET_IPV4_CONF_SECURE_REDIRECTS=5,
- NET_IPV4_CONF_SEND_REDIRECTS=6,
- NET_IPV4_CONF_SHARED_MEDIA=7,
- NET_IPV4_CONF_RP_FILTER=8,
- NET_IPV4_CONF_ACCEPT_SOURCE_ROUTE=9,
- NET_IPV4_CONF_BOOTP_RELAY=10,
- NET_IPV4_CONF_LOG_MARTIANS=11,
- NET_IPV4_CONF_TAG=12,
- NET_IPV4_CONF_ARPFILTER=13,
- NET_IPV4_CONF_MEDIUM_ID=14,
- NET_IPV4_CONF_NOXFRM=15,
- NET_IPV4_CONF_NOPOLICY=16,
- NET_IPV4_CONF_FORCE_IGMP_VERSION=17,
- NET_IPV4_CONF_ARP_ANNOUNCE=18,
- NET_IPV4_CONF_ARP_IGNORE=19,
- NET_IPV4_CONF_PROMOTE_SECONDARIES=20,
- NET_IPV4_CONF_ARP_ACCEPT=21,
- NET_IPV4_CONF_ARP_NOTIFY=22,
-};
-
-/* /proc/sys/net/ipv4/netfilter */
-enum
-{
- NET_IPV4_NF_CONNTRACK_MAX=1,
- NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_SYN_SENT=2,
- NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_SYN_RECV=3,
- NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_ESTABLISHED=4,
- NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_FIN_WAIT=5,
- NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_CLOSE_WAIT=6,
- NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_LAST_ACK=7,
- NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_TIME_WAIT=8,
- NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_CLOSE=9,
- NET_IPV4_NF_CONNTRACK_UDP_TIMEOUT=10,
- NET_IPV4_NF_CONNTRACK_UDP_TIMEOUT_STREAM=11,
- NET_IPV4_NF_CONNTRACK_ICMP_TIMEOUT=12,
- NET_IPV4_NF_CONNTRACK_GENERIC_TIMEOUT=13,
- NET_IPV4_NF_CONNTRACK_BUCKETS=14,
- NET_IPV4_NF_CONNTRACK_LOG_INVALID=15,
- NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_MAX_RETRANS=16,
- NET_IPV4_NF_CONNTRACK_TCP_LOOSE=17,
- NET_IPV4_NF_CONNTRACK_TCP_BE_LIBERAL=18,
- NET_IPV4_NF_CONNTRACK_TCP_MAX_RETRANS=19,
- NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_CLOSED=20,
- NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_COOKIE_WAIT=21,
- NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_COOKIE_ECHOED=22,
- NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_ESTABLISHED=23,
- NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_SENT=24,
- NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_RECD=25,
- NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_ACK_SENT=26,
- NET_IPV4_NF_CONNTRACK_COUNT=27,
- NET_IPV4_NF_CONNTRACK_CHECKSUM=28,
-};
-
-/* /proc/sys/net/ipv6 */
-enum {
- NET_IPV6_CONF=16,
- NET_IPV6_NEIGH=17,
- NET_IPV6_ROUTE=18,
- NET_IPV6_ICMP=19,
- NET_IPV6_BINDV6ONLY=20,
- NET_IPV6_IP6FRAG_HIGH_THRESH=21,
- NET_IPV6_IP6FRAG_LOW_THRESH=22,
- NET_IPV6_IP6FRAG_TIME=23,
- NET_IPV6_IP6FRAG_SECRET_INTERVAL=24,
- NET_IPV6_MLD_MAX_MSF=25,
-};
-
-enum {
- NET_IPV6_ROUTE_FLUSH=1,
- NET_IPV6_ROUTE_GC_THRESH=2,
- NET_IPV6_ROUTE_MAX_SIZE=3,
- NET_IPV6_ROUTE_GC_MIN_INTERVAL=4,
- NET_IPV6_ROUTE_GC_TIMEOUT=5,
- NET_IPV6_ROUTE_GC_INTERVAL=6,
- NET_IPV6_ROUTE_GC_ELASTICITY=7,
- NET_IPV6_ROUTE_MTU_EXPIRES=8,
- NET_IPV6_ROUTE_MIN_ADVMSS=9,
- NET_IPV6_ROUTE_GC_MIN_INTERVAL_MS=10
-};
-
-enum {
- NET_IPV6_FORWARDING=1,
- NET_IPV6_HOP_LIMIT=2,
- NET_IPV6_MTU=3,
- NET_IPV6_ACCEPT_RA=4,
- NET_IPV6_ACCEPT_REDIRECTS=5,
- NET_IPV6_AUTOCONF=6,
- NET_IPV6_DAD_TRANSMITS=7,
- NET_IPV6_RTR_SOLICITS=8,
- NET_IPV6_RTR_SOLICIT_INTERVAL=9,
- NET_IPV6_RTR_SOLICIT_DELAY=10,
- NET_IPV6_USE_TEMPADDR=11,
- NET_IPV6_TEMP_VALID_LFT=12,
- NET_IPV6_TEMP_PREFERED_LFT=13,
- NET_IPV6_REGEN_MAX_RETRY=14,
- NET_IPV6_MAX_DESYNC_FACTOR=15,
- NET_IPV6_MAX_ADDRESSES=16,
- NET_IPV6_FORCE_MLD_VERSION=17,
- NET_IPV6_ACCEPT_RA_DEFRTR=18,
- NET_IPV6_ACCEPT_RA_PINFO=19,
- NET_IPV6_ACCEPT_RA_RTR_PREF=20,
- NET_IPV6_RTR_PROBE_INTERVAL=21,
- NET_IPV6_ACCEPT_RA_RT_INFO_MAX_PLEN=22,
- NET_IPV6_PROXY_NDP=23,
- NET_IPV6_ACCEPT_SOURCE_ROUTE=25,
- __NET_IPV6_MAX
-};
-
-/* /proc/sys/net/ipv6/icmp */
-enum {
- NET_IPV6_ICMP_RATELIMIT=1
-};
-
-/* /proc/sys/net/<protocol>/neigh/<dev> */
-enum {
- NET_NEIGH_MCAST_SOLICIT=1,
- NET_NEIGH_UCAST_SOLICIT=2,
- NET_NEIGH_APP_SOLICIT=3,
- NET_NEIGH_RETRANS_TIME=4,
- NET_NEIGH_REACHABLE_TIME=5,
- NET_NEIGH_DELAY_PROBE_TIME=6,
- NET_NEIGH_GC_STALE_TIME=7,
- NET_NEIGH_UNRES_QLEN=8,
- NET_NEIGH_PROXY_QLEN=9,
- NET_NEIGH_ANYCAST_DELAY=10,
- NET_NEIGH_PROXY_DELAY=11,
- NET_NEIGH_LOCKTIME=12,
- NET_NEIGH_GC_INTERVAL=13,
- NET_NEIGH_GC_THRESH1=14,
- NET_NEIGH_GC_THRESH2=15,
- NET_NEIGH_GC_THRESH3=16,
- NET_NEIGH_RETRANS_TIME_MS=17,
- NET_NEIGH_REACHABLE_TIME_MS=18,
-};
-
-/* /proc/sys/net/dccp */
-enum {
- NET_DCCP_DEFAULT=1,
-};
-
-/* /proc/sys/net/ipx */
-enum {
- NET_IPX_PPROP_BROADCASTING=1,
- NET_IPX_FORWARDING=2
-};
-
-/* /proc/sys/net/llc */
-enum {
- NET_LLC2=1,
- NET_LLC_STATION=2,
-};
-
-/* /proc/sys/net/llc/llc2 */
-enum {
- NET_LLC2_TIMEOUT=1,
-};
-
-/* /proc/sys/net/llc/station */
-enum {
- NET_LLC_STATION_ACK_TIMEOUT=1,
-};
-
-/* /proc/sys/net/llc/llc2/timeout */
-enum {
- NET_LLC2_ACK_TIMEOUT=1,
- NET_LLC2_P_TIMEOUT=2,
- NET_LLC2_REJ_TIMEOUT=3,
- NET_LLC2_BUSY_TIMEOUT=4,
-};
-
-/* /proc/sys/net/appletalk */
-enum {
- NET_ATALK_AARP_EXPIRY_TIME=1,
- NET_ATALK_AARP_TICK_TIME=2,
- NET_ATALK_AARP_RETRANSMIT_LIMIT=3,
- NET_ATALK_AARP_RESOLVE_TIME=4
-};
-
-
-/* /proc/sys/net/netrom */
-enum {
- NET_NETROM_DEFAULT_PATH_QUALITY=1,
- NET_NETROM_OBSOLESCENCE_COUNT_INITIALISER=2,
- NET_NETROM_NETWORK_TTL_INITIALISER=3,
- NET_NETROM_TRANSPORT_TIMEOUT=4,
- NET_NETROM_TRANSPORT_MAXIMUM_TRIES=5,
- NET_NETROM_TRANSPORT_ACKNOWLEDGE_DELAY=6,
- NET_NETROM_TRANSPORT_BUSY_DELAY=7,
- NET_NETROM_TRANSPORT_REQUESTED_WINDOW_SIZE=8,
- NET_NETROM_TRANSPORT_NO_ACTIVITY_TIMEOUT=9,
- NET_NETROM_ROUTING_CONTROL=10,
- NET_NETROM_LINK_FAILS_COUNT=11,
- NET_NETROM_RESET=12
-};
-
-/* /proc/sys/net/ax25 */
-enum {
- NET_AX25_IP_DEFAULT_MODE=1,
- NET_AX25_DEFAULT_MODE=2,
- NET_AX25_BACKOFF_TYPE=3,
- NET_AX25_CONNECT_MODE=4,
- NET_AX25_STANDARD_WINDOW=5,
- NET_AX25_EXTENDED_WINDOW=6,
- NET_AX25_T1_TIMEOUT=7,
- NET_AX25_T2_TIMEOUT=8,
- NET_AX25_T3_TIMEOUT=9,
- NET_AX25_IDLE_TIMEOUT=10,
- NET_AX25_N2=11,
- NET_AX25_PACLEN=12,
- NET_AX25_PROTOCOL=13,
- NET_AX25_DAMA_SLAVE_TIMEOUT=14
-};
-
-/* /proc/sys/net/rose */
-enum {
- NET_ROSE_RESTART_REQUEST_TIMEOUT=1,
- NET_ROSE_CALL_REQUEST_TIMEOUT=2,
- NET_ROSE_RESET_REQUEST_TIMEOUT=3,
- NET_ROSE_CLEAR_REQUEST_TIMEOUT=4,
- NET_ROSE_ACK_HOLD_BACK_TIMEOUT=5,
- NET_ROSE_ROUTING_CONTROL=6,
- NET_ROSE_LINK_FAIL_TIMEOUT=7,
- NET_ROSE_MAX_VCS=8,
- NET_ROSE_WINDOW_SIZE=9,
- NET_ROSE_NO_ACTIVITY_TIMEOUT=10
-};
-
-/* /proc/sys/net/x25 */
-enum {
- NET_X25_RESTART_REQUEST_TIMEOUT=1,
- NET_X25_CALL_REQUEST_TIMEOUT=2,
- NET_X25_RESET_REQUEST_TIMEOUT=3,
- NET_X25_CLEAR_REQUEST_TIMEOUT=4,
- NET_X25_ACK_HOLD_BACK_TIMEOUT=5,
- NET_X25_FORWARD=6
-};
-
-/* /proc/sys/net/token-ring */
-enum
-{
- NET_TR_RIF_TIMEOUT=1
-};
-
-/* /proc/sys/net/decnet/ */
-enum {
- NET_DECNET_NODE_TYPE = 1,
- NET_DECNET_NODE_ADDRESS = 2,
- NET_DECNET_NODE_NAME = 3,
- NET_DECNET_DEFAULT_DEVICE = 4,
- NET_DECNET_TIME_WAIT = 5,
- NET_DECNET_DN_COUNT = 6,
- NET_DECNET_DI_COUNT = 7,
- NET_DECNET_DR_COUNT = 8,
- NET_DECNET_DST_GC_INTERVAL = 9,
- NET_DECNET_CONF = 10,
- NET_DECNET_NO_FC_MAX_CWND = 11,
- NET_DECNET_MEM = 12,
- NET_DECNET_RMEM = 13,
- NET_DECNET_WMEM = 14,
- NET_DECNET_DEBUG_LEVEL = 255
-};
-
-/* /proc/sys/net/decnet/conf/<dev> */
-enum {
- NET_DECNET_CONF_LOOPBACK = -2,
- NET_DECNET_CONF_DDCMP = -3,
- NET_DECNET_CONF_PPP = -4,
- NET_DECNET_CONF_X25 = -5,
- NET_DECNET_CONF_GRE = -6,
- NET_DECNET_CONF_ETHER = -7
-
- /* ... and ifindex of devices */
-};
-
-/* /proc/sys/net/decnet/conf/<dev>/ */
-enum {
- NET_DECNET_CONF_DEV_PRIORITY = 1,
- NET_DECNET_CONF_DEV_T1 = 2,
- NET_DECNET_CONF_DEV_T2 = 3,
- NET_DECNET_CONF_DEV_T3 = 4,
- NET_DECNET_CONF_DEV_FORWARDING = 5,
- NET_DECNET_CONF_DEV_BLKSIZE = 6,
- NET_DECNET_CONF_DEV_STATE = 7
-};
-
-/* /proc/sys/net/sctp */
-enum {
- NET_SCTP_RTO_INITIAL = 1,
- NET_SCTP_RTO_MIN = 2,
- NET_SCTP_RTO_MAX = 3,
- NET_SCTP_RTO_ALPHA = 4,
- NET_SCTP_RTO_BETA = 5,
- NET_SCTP_VALID_COOKIE_LIFE = 6,
- NET_SCTP_ASSOCIATION_MAX_RETRANS = 7,
- NET_SCTP_PATH_MAX_RETRANS = 8,
- NET_SCTP_MAX_INIT_RETRANSMITS = 9,
- NET_SCTP_HB_INTERVAL = 10,
- NET_SCTP_PRESERVE_ENABLE = 11,
- NET_SCTP_MAX_BURST = 12,
- NET_SCTP_ADDIP_ENABLE = 13,
- NET_SCTP_PRSCTP_ENABLE = 14,
- NET_SCTP_SNDBUF_POLICY = 15,
- NET_SCTP_SACK_TIMEOUT = 16,
- NET_SCTP_RCVBUF_POLICY = 17,
-};
-
-/* /proc/sys/net/bridge */
-enum {
- NET_BRIDGE_NF_CALL_ARPTABLES = 1,
- NET_BRIDGE_NF_CALL_IPTABLES = 2,
- NET_BRIDGE_NF_CALL_IP6TABLES = 3,
- NET_BRIDGE_NF_FILTER_VLAN_TAGGED = 4,
- NET_BRIDGE_NF_FILTER_PPPOE_TAGGED = 5,
-};
-
-/* proc/sys/net/irda */
-enum {
- NET_IRDA_DISCOVERY=1,
- NET_IRDA_DEVNAME=2,
- NET_IRDA_DEBUG=3,
- NET_IRDA_FAST_POLL=4,
- NET_IRDA_DISCOVERY_SLOTS=5,
- NET_IRDA_DISCOVERY_TIMEOUT=6,
- NET_IRDA_SLOT_TIMEOUT=7,
- NET_IRDA_MAX_BAUD_RATE=8,
- NET_IRDA_MIN_TX_TURN_TIME=9,
- NET_IRDA_MAX_TX_DATA_SIZE=10,
- NET_IRDA_MAX_TX_WINDOW=11,
- NET_IRDA_MAX_NOREPLY_TIME=12,
- NET_IRDA_WARN_NOREPLY_TIME=13,
- NET_IRDA_LAP_KEEPALIVE_TIME=14,
-};
-
-
-/* CTL_FS names: */
-enum
-{
- FS_NRINODE=1, /* int:current number of allocated inodes */
- FS_STATINODE=2,
- FS_MAXINODE=3, /* int:maximum number of inodes that can be allocated */
- FS_NRDQUOT=4, /* int:current number of allocated dquots */
- FS_MAXDQUOT=5, /* int:maximum number of dquots that can be allocated */
- FS_NRFILE=6, /* int:current number of allocated filedescriptors */
- FS_MAXFILE=7, /* int:maximum number of filedescriptors that can be allocated */
- FS_DENTRY=8,
- FS_NRSUPER=9, /* int:current number of allocated super_blocks */
- FS_MAXSUPER=10, /* int:maximum number of super_blocks that can be allocated */
- FS_OVERFLOWUID=11, /* int: overflow UID */
- FS_OVERFLOWGID=12, /* int: overflow GID */
- FS_LEASES=13, /* int: leases enabled */
- FS_DIR_NOTIFY=14, /* int: directory notification enabled */
- FS_LEASE_TIME=15, /* int: maximum time to wait for a lease break */
- FS_DQSTATS=16, /* disc quota usage statistics and control */
- FS_XFS=17, /* struct: control xfs parameters */
- FS_AIO_NR=18, /* current system-wide number of aio requests */
- FS_AIO_MAX_NR=19, /* system-wide maximum number of aio requests */
- FS_INOTIFY=20, /* inotify submenu */
- FS_OCFS2=988, /* ocfs2 */
-};
-
-/* /proc/sys/fs/quota/ */
-enum {
- FS_DQ_LOOKUPS = 1,
- FS_DQ_DROPS = 2,
- FS_DQ_READS = 3,
- FS_DQ_WRITES = 4,
- FS_DQ_CACHE_HITS = 5,
- FS_DQ_ALLOCATED = 6,
- FS_DQ_FREE = 7,
- FS_DQ_SYNCS = 8,
- FS_DQ_WARNINGS = 9,
-};
-
-/* CTL_DEBUG names: */
-
-/* CTL_DEV names: */
-enum {
- DEV_CDROM=1,
- DEV_HWMON=2,
- DEV_PARPORT=3,
- DEV_RAID=4,
- DEV_MAC_HID=5,
- DEV_SCSI=6,
- DEV_IPMI=7,
-};
-
-/* /proc/sys/dev/cdrom */
-enum {
- DEV_CDROM_INFO=1,
- DEV_CDROM_AUTOCLOSE=2,
- DEV_CDROM_AUTOEJECT=3,
- DEV_CDROM_DEBUG=4,
- DEV_CDROM_LOCK=5,
- DEV_CDROM_CHECK_MEDIA=6
-};
-
-/* /proc/sys/dev/parport */
-enum {
- DEV_PARPORT_DEFAULT=-3
-};
-
-/* /proc/sys/dev/raid */
-enum {
- DEV_RAID_SPEED_LIMIT_MIN=1,
- DEV_RAID_SPEED_LIMIT_MAX=2
-};
-
-/* /proc/sys/dev/parport/default */
-enum {
- DEV_PARPORT_DEFAULT_TIMESLICE=1,
- DEV_PARPORT_DEFAULT_SPINTIME=2
-};
-
-/* /proc/sys/dev/parport/parport n */
-enum {
- DEV_PARPORT_SPINTIME=1,
- DEV_PARPORT_BASE_ADDR=2,
- DEV_PARPORT_IRQ=3,
- DEV_PARPORT_DMA=4,
- DEV_PARPORT_MODES=5,
- DEV_PARPORT_DEVICES=6,
- DEV_PARPORT_AUTOPROBE=16
-};
-
-/* /proc/sys/dev/parport/parport n/devices/ */
-enum {
- DEV_PARPORT_DEVICES_ACTIVE=-3,
-};
-
-/* /proc/sys/dev/parport/parport n/devices/device n */
-enum {
- DEV_PARPORT_DEVICE_TIMESLICE=1,
-};
-
-/* /proc/sys/dev/mac_hid */
-enum {
- DEV_MAC_HID_KEYBOARD_SENDS_LINUX_KEYCODES=1,
- DEV_MAC_HID_KEYBOARD_LOCK_KEYCODES=2,
- DEV_MAC_HID_MOUSE_BUTTON_EMULATION=3,
- DEV_MAC_HID_MOUSE_BUTTON2_KEYCODE=4,
- DEV_MAC_HID_MOUSE_BUTTON3_KEYCODE=5,
- DEV_MAC_HID_ADB_MOUSE_SENDS_KEYCODES=6
-};
-
-/* /proc/sys/dev/scsi */
-enum {
- DEV_SCSI_LOGGING_LEVEL=1,
-};
-
-/* /proc/sys/dev/ipmi */
-enum {
- DEV_IPMI_POWEROFF_POWERCYCLE=1,
-};
-
-/* /proc/sys/abi */
-enum
-{
- ABI_DEFHANDLER_COFF=1, /* default handler for coff binaries */
- ABI_DEFHANDLER_ELF=2, /* default handler for ELF binaries */
- ABI_DEFHANDLER_LCALL7=3,/* default handler for procs using lcall7 */
- ABI_DEFHANDLER_LIBCSO=4,/* default handler for an libc.so ELF interp */
- ABI_TRACE=5, /* tracing flags */
- ABI_FAKE_UTSNAME=6, /* fake target utsname information */
-};
-
-#ifdef __KERNEL__
#include <linux/list.h>
#include <linux/rcupdate.h>
#include <linux/wait.h>
#include <linux/rbtree.h>
+#include <uapi/linux/sysctl.h>
/* For the /proc/sys support */
struct ctl_table;
@@ -1122,6 +215,4 @@
#endif /* CONFIG_SYSCTL */
-#endif /* __KERNEL__ */
-
#endif /* _LINUX_SYSCTL_H */
diff --git a/include/linux/tcp.h b/include/linux/tcp.h
index 67c789a..8a7fc4b 100644
--- a/include/linux/tcp.h
+++ b/include/linux/tcp.h
@@ -17,217 +17,13 @@
#ifndef _LINUX_TCP_H
#define _LINUX_TCP_H
-#include <linux/types.h>
-#include <asm/byteorder.h>
-#include <linux/socket.h>
-
-struct tcphdr {
- __be16 source;
- __be16 dest;
- __be32 seq;
- __be32 ack_seq;
-#if defined(__LITTLE_ENDIAN_BITFIELD)
- __u16 res1:4,
- doff:4,
- fin:1,
- syn:1,
- rst:1,
- psh:1,
- ack:1,
- urg:1,
- ece:1,
- cwr:1;
-#elif defined(__BIG_ENDIAN_BITFIELD)
- __u16 doff:4,
- res1:4,
- cwr:1,
- ece:1,
- urg:1,
- ack:1,
- psh:1,
- rst:1,
- syn:1,
- fin:1;
-#else
-#error "Adjust your <asm/byteorder.h> defines"
-#endif
- __be16 window;
- __sum16 check;
- __be16 urg_ptr;
-};
-
-/*
- * The union cast uses a gcc extension to avoid aliasing problems
- * (union is compatible to any of its members)
- * This means this part of the code is -fstrict-aliasing safe now.
- */
-union tcp_word_hdr {
- struct tcphdr hdr;
- __be32 words[5];
-};
-
-#define tcp_flag_word(tp) ( ((union tcp_word_hdr *)(tp))->words [3])
-
-enum {
- TCP_FLAG_CWR = __constant_cpu_to_be32(0x00800000),
- TCP_FLAG_ECE = __constant_cpu_to_be32(0x00400000),
- TCP_FLAG_URG = __constant_cpu_to_be32(0x00200000),
- TCP_FLAG_ACK = __constant_cpu_to_be32(0x00100000),
- TCP_FLAG_PSH = __constant_cpu_to_be32(0x00080000),
- TCP_FLAG_RST = __constant_cpu_to_be32(0x00040000),
- TCP_FLAG_SYN = __constant_cpu_to_be32(0x00020000),
- TCP_FLAG_FIN = __constant_cpu_to_be32(0x00010000),
- TCP_RESERVED_BITS = __constant_cpu_to_be32(0x0F000000),
- TCP_DATA_OFFSET = __constant_cpu_to_be32(0xF0000000)
-};
-
-/*
- * TCP general constants
- */
-#define TCP_MSS_DEFAULT 536U /* IPv4 (RFC1122, RFC2581) */
-#define TCP_MSS_DESIRED 1220U /* IPv6 (tunneled), EDNS0 (RFC3226) */
-
-/* TCP socket options */
-#define TCP_NODELAY 1 /* Turn off Nagle's algorithm. */
-#define TCP_MAXSEG 2 /* Limit MSS */
-#define TCP_CORK 3 /* Never send partially complete segments */
-#define TCP_KEEPIDLE 4 /* Start keeplives after this period */
-#define TCP_KEEPINTVL 5 /* Interval between keepalives */
-#define TCP_KEEPCNT 6 /* Number of keepalives before death */
-#define TCP_SYNCNT 7 /* Number of SYN retransmits */
-#define TCP_LINGER2 8 /* Life time of orphaned FIN-WAIT-2 state */
-#define TCP_DEFER_ACCEPT 9 /* Wake up listener only when data arrive */
-#define TCP_WINDOW_CLAMP 10 /* Bound advertised window */
-#define TCP_INFO 11 /* Information about this connection. */
-#define TCP_QUICKACK 12 /* Block/reenable quick acks */
-#define TCP_CONGESTION 13 /* Congestion control algorithm */
-#define TCP_MD5SIG 14 /* TCP MD5 Signature (RFC2385) */
-#define TCP_COOKIE_TRANSACTIONS 15 /* TCP Cookie Transactions */
-#define TCP_THIN_LINEAR_TIMEOUTS 16 /* Use linear timeouts for thin streams*/
-#define TCP_THIN_DUPACK 17 /* Fast retrans. after 1 dupack */
-#define TCP_USER_TIMEOUT 18 /* How long for loss retry before timeout */
-#define TCP_REPAIR 19 /* TCP sock is under repair right now */
-#define TCP_REPAIR_QUEUE 20
-#define TCP_QUEUE_SEQ 21
-#define TCP_REPAIR_OPTIONS 22
-#define TCP_FASTOPEN 23 /* Enable FastOpen on listeners */
-
-struct tcp_repair_opt {
- __u32 opt_code;
- __u32 opt_val;
-};
-
-enum {
- TCP_NO_QUEUE,
- TCP_RECV_QUEUE,
- TCP_SEND_QUEUE,
- TCP_QUEUES_NR,
-};
-
-/* for TCP_INFO socket option */
-#define TCPI_OPT_TIMESTAMPS 1
-#define TCPI_OPT_SACK 2
-#define TCPI_OPT_WSCALE 4
-#define TCPI_OPT_ECN 8 /* ECN was negociated at TCP session init */
-#define TCPI_OPT_ECN_SEEN 16 /* we received at least one packet with ECT */
-
-enum tcp_ca_state {
- TCP_CA_Open = 0,
-#define TCPF_CA_Open (1<<TCP_CA_Open)
- TCP_CA_Disorder = 1,
-#define TCPF_CA_Disorder (1<<TCP_CA_Disorder)
- TCP_CA_CWR = 2,
-#define TCPF_CA_CWR (1<<TCP_CA_CWR)
- TCP_CA_Recovery = 3,
-#define TCPF_CA_Recovery (1<<TCP_CA_Recovery)
- TCP_CA_Loss = 4
-#define TCPF_CA_Loss (1<<TCP_CA_Loss)
-};
-
-struct tcp_info {
- __u8 tcpi_state;
- __u8 tcpi_ca_state;
- __u8 tcpi_retransmits;
- __u8 tcpi_probes;
- __u8 tcpi_backoff;
- __u8 tcpi_options;
- __u8 tcpi_snd_wscale : 4, tcpi_rcv_wscale : 4;
-
- __u32 tcpi_rto;
- __u32 tcpi_ato;
- __u32 tcpi_snd_mss;
- __u32 tcpi_rcv_mss;
-
- __u32 tcpi_unacked;
- __u32 tcpi_sacked;
- __u32 tcpi_lost;
- __u32 tcpi_retrans;
- __u32 tcpi_fackets;
-
- /* Times. */
- __u32 tcpi_last_data_sent;
- __u32 tcpi_last_ack_sent; /* Not remembered, sorry. */
- __u32 tcpi_last_data_recv;
- __u32 tcpi_last_ack_recv;
-
- /* Metrics. */
- __u32 tcpi_pmtu;
- __u32 tcpi_rcv_ssthresh;
- __u32 tcpi_rtt;
- __u32 tcpi_rttvar;
- __u32 tcpi_snd_ssthresh;
- __u32 tcpi_snd_cwnd;
- __u32 tcpi_advmss;
- __u32 tcpi_reordering;
-
- __u32 tcpi_rcv_rtt;
- __u32 tcpi_rcv_space;
-
- __u32 tcpi_total_retrans;
-};
-
-/* for TCP_MD5SIG socket option */
-#define TCP_MD5SIG_MAXKEYLEN 80
-
-struct tcp_md5sig {
- struct __kernel_sockaddr_storage tcpm_addr; /* address associated */
- __u16 __tcpm_pad1; /* zero */
- __u16 tcpm_keylen; /* key length */
- __u32 __tcpm_pad2; /* zero */
- __u8 tcpm_key[TCP_MD5SIG_MAXKEYLEN]; /* key (binary) */
-};
-
-/* for TCP_COOKIE_TRANSACTIONS (TCPCT) socket option */
-#define TCP_COOKIE_MIN 8 /* 64-bits */
-#define TCP_COOKIE_MAX 16 /* 128-bits */
-#define TCP_COOKIE_PAIR_SIZE (2*TCP_COOKIE_MAX)
-
-/* Flags for both getsockopt and setsockopt */
-#define TCP_COOKIE_IN_ALWAYS (1 << 0) /* Discard SYN without cookie */
-#define TCP_COOKIE_OUT_NEVER (1 << 1) /* Prohibit outgoing cookies,
- * supercedes everything. */
-
-/* Flags for getsockopt */
-#define TCP_S_DATA_IN (1 << 2) /* Was data received? */
-#define TCP_S_DATA_OUT (1 << 3) /* Was data sent? */
-
-/* TCP_COOKIE_TRANSACTIONS data */
-struct tcp_cookie_transactions {
- __u16 tcpct_flags; /* see above */
- __u8 __tcpct_pad1; /* zero */
- __u8 tcpct_cookie_desired; /* bytes */
- __u16 tcpct_s_data_desired; /* bytes of variable data */
- __u16 tcpct_used; /* bytes in value */
- __u8 tcpct_value[TCP_MSS_DEFAULT];
-};
-
-#ifdef __KERNEL__
#include <linux/skbuff.h>
#include <linux/dmaengine.h>
#include <net/sock.h>
#include <net/inet_connection_sock.h>
#include <net/inet_timewait_sock.h>
+#include <uapi/linux/tcp.h>
static inline struct tcphdr *tcp_hdr(const struct sk_buff *skb)
{
@@ -595,6 +391,4 @@
return 0;
}
-#endif /* __KERNEL__ */
-
#endif /* _LINUX_TCP_H */
diff --git a/include/linux/time.h b/include/linux/time.h
index b51e664..4d358e9 100644
--- a/include/linux/time.h
+++ b/include/linux/time.h
@@ -1,33 +1,10 @@
#ifndef _LINUX_TIME_H
#define _LINUX_TIME_H
-#include <linux/types.h>
-
-#ifdef __KERNEL__
# include <linux/cache.h>
# include <linux/seqlock.h>
# include <linux/math64.h>
-#endif
-
-#ifndef _STRUCT_TIMESPEC
-#define _STRUCT_TIMESPEC
-struct timespec {
- __kernel_time_t tv_sec; /* seconds */
- long tv_nsec; /* nanoseconds */
-};
-#endif
-
-struct timeval {
- __kernel_time_t tv_sec; /* seconds */
- __kernel_suseconds_t tv_usec; /* microseconds */
-};
-
-struct timezone {
- int tz_minuteswest; /* minutes west of Greenwich */
- int tz_dsttime; /* type of dst correction */
-};
-
-#ifdef __KERNEL__
+#include <uapi/linux/time.h>
extern struct timezone sys_tz;
@@ -280,51 +257,4 @@
a->tv_nsec = ns;
}
-#endif /* __KERNEL__ */
-
-/*
- * Names of the interval timers, and structure
- * defining a timer setting:
- */
-#define ITIMER_REAL 0
-#define ITIMER_VIRTUAL 1
-#define ITIMER_PROF 2
-
-struct itimerspec {
- struct timespec it_interval; /* timer period */
- struct timespec it_value; /* timer expiration */
-};
-
-struct itimerval {
- struct timeval it_interval; /* timer interval */
- struct timeval it_value; /* current value */
-};
-
-/*
- * The IDs of the various system clocks (for POSIX.1b interval timers):
- */
-#define CLOCK_REALTIME 0
-#define CLOCK_MONOTONIC 1
-#define CLOCK_PROCESS_CPUTIME_ID 2
-#define CLOCK_THREAD_CPUTIME_ID 3
-#define CLOCK_MONOTONIC_RAW 4
-#define CLOCK_REALTIME_COARSE 5
-#define CLOCK_MONOTONIC_COARSE 6
-#define CLOCK_BOOTTIME 7
-#define CLOCK_REALTIME_ALARM 8
-#define CLOCK_BOOTTIME_ALARM 9
-
-/*
- * The IDs of various hardware clocks:
- */
-#define CLOCK_SGI_CYCLE 10
-#define MAX_CLOCKS 16
-#define CLOCKS_MASK (CLOCK_REALTIME | CLOCK_MONOTONIC)
-#define CLOCKS_MONO CLOCK_MONOTONIC
-
-/*
- * The various flags for setting POSIX.1b interval timers:
- */
-#define TIMER_ABSTIME 0x01
-
#endif
diff --git a/include/linux/timex.h b/include/linux/timex.h
index 7c5ceb2..5ec87c6 100644
--- a/include/linux/timex.h
+++ b/include/linux/timex.h
@@ -53,120 +53,11 @@
#ifndef _LINUX_TIMEX_H
#define _LINUX_TIMEX_H
-#include <linux/time.h>
+#include <uapi/linux/timex.h>
-#define NTP_API 4 /* NTP API version */
-
-/*
- * syscall interface - used (mainly by NTP daemon)
- * to discipline kernel clock oscillator
- */
-struct timex {
- unsigned int modes; /* mode selector */
- long offset; /* time offset (usec) */
- long freq; /* frequency offset (scaled ppm) */
- long maxerror; /* maximum error (usec) */
- long esterror; /* estimated error (usec) */
- int status; /* clock command/status */
- long constant; /* pll time constant */
- long precision; /* clock precision (usec) (read only) */
- long tolerance; /* clock frequency tolerance (ppm)
- * (read only)
- */
- struct timeval time; /* (read only, except for ADJ_SETOFFSET) */
- long tick; /* (modified) usecs between clock ticks */
-
- long ppsfreq; /* pps frequency (scaled ppm) (ro) */
- long jitter; /* pps jitter (us) (ro) */
- int shift; /* interval duration (s) (shift) (ro) */
- long stabil; /* pps stability (scaled ppm) (ro) */
- long jitcnt; /* jitter limit exceeded (ro) */
- long calcnt; /* calibration intervals (ro) */
- long errcnt; /* calibration errors (ro) */
- long stbcnt; /* stability limit exceeded (ro) */
-
- int tai; /* TAI offset (ro) */
-
- int :32; int :32; int :32; int :32;
- int :32; int :32; int :32; int :32;
- int :32; int :32; int :32;
-};
-
-/*
- * Mode codes (timex.mode)
- */
-#define ADJ_OFFSET 0x0001 /* time offset */
-#define ADJ_FREQUENCY 0x0002 /* frequency offset */
-#define ADJ_MAXERROR 0x0004 /* maximum time error */
-#define ADJ_ESTERROR 0x0008 /* estimated time error */
-#define ADJ_STATUS 0x0010 /* clock status */
-#define ADJ_TIMECONST 0x0020 /* pll time constant */
-#define ADJ_TAI 0x0080 /* set TAI offset */
-#define ADJ_SETOFFSET 0x0100 /* add 'time' to current time */
-#define ADJ_MICRO 0x1000 /* select microsecond resolution */
-#define ADJ_NANO 0x2000 /* select nanosecond resolution */
-#define ADJ_TICK 0x4000 /* tick value */
-
-#ifdef __KERNEL__
#define ADJ_ADJTIME 0x8000 /* switch between adjtime/adjtimex modes */
#define ADJ_OFFSET_SINGLESHOT 0x0001 /* old-fashioned adjtime */
#define ADJ_OFFSET_READONLY 0x2000 /* read-only adjtime */
-#else
-#define ADJ_OFFSET_SINGLESHOT 0x8001 /* old-fashioned adjtime */
-#define ADJ_OFFSET_SS_READ 0xa001 /* read-only adjtime */
-#endif
-
-/* NTP userland likes the MOD_ prefix better */
-#define MOD_OFFSET ADJ_OFFSET
-#define MOD_FREQUENCY ADJ_FREQUENCY
-#define MOD_MAXERROR ADJ_MAXERROR
-#define MOD_ESTERROR ADJ_ESTERROR
-#define MOD_STATUS ADJ_STATUS
-#define MOD_TIMECONST ADJ_TIMECONST
-#define MOD_TAI ADJ_TAI
-#define MOD_MICRO ADJ_MICRO
-#define MOD_NANO ADJ_NANO
-
-
-/*
- * Status codes (timex.status)
- */
-#define STA_PLL 0x0001 /* enable PLL updates (rw) */
-#define STA_PPSFREQ 0x0002 /* enable PPS freq discipline (rw) */
-#define STA_PPSTIME 0x0004 /* enable PPS time discipline (rw) */
-#define STA_FLL 0x0008 /* select frequency-lock mode (rw) */
-
-#define STA_INS 0x0010 /* insert leap (rw) */
-#define STA_DEL 0x0020 /* delete leap (rw) */
-#define STA_UNSYNC 0x0040 /* clock unsynchronized (rw) */
-#define STA_FREQHOLD 0x0080 /* hold frequency (rw) */
-
-#define STA_PPSSIGNAL 0x0100 /* PPS signal present (ro) */
-#define STA_PPSJITTER 0x0200 /* PPS signal jitter exceeded (ro) */
-#define STA_PPSWANDER 0x0400 /* PPS signal wander exceeded (ro) */
-#define STA_PPSERROR 0x0800 /* PPS signal calibration error (ro) */
-
-#define STA_CLOCKERR 0x1000 /* clock hardware fault (ro) */
-#define STA_NANO 0x2000 /* resolution (0 = us, 1 = ns) (ro) */
-#define STA_MODE 0x4000 /* mode (0 = PLL, 1 = FLL) (ro) */
-#define STA_CLK 0x8000 /* clock source (0 = A, 1 = B) (ro) */
-
-/* read-only bits */
-#define STA_RONLY (STA_PPSSIGNAL | STA_PPSJITTER | STA_PPSWANDER | \
- STA_PPSERROR | STA_CLOCKERR | STA_NANO | STA_MODE | STA_CLK)
-
-/*
- * Clock states (time_state)
- */
-#define TIME_OK 0 /* clock synchronized, no leap second */
-#define TIME_INS 1 /* insert leap second */
-#define TIME_DEL 2 /* delete leap second */
-#define TIME_OOP 3 /* leap second in progress */
-#define TIME_WAIT 4 /* leap second has occurred */
-#define TIME_ERROR 5 /* clock not synchronized */
-#define TIME_BAD TIME_ERROR /* bw compat */
-
-#ifdef __KERNEL__
#include <linux/compiler.h>
#include <linux/types.h>
#include <linux/param.h>
@@ -261,6 +152,4 @@
/* The clock frequency of the i8253/i8254 PIT */
#define PIT_TICK_RATE 1193182ul
-#endif /* KERNEL */
-
#endif /* LINUX_TIMEX_H */
diff --git a/include/linux/toshiba.h b/include/linux/toshiba.h
index 772dedb..915c3bb 100644
--- a/include/linux/toshiba.h
+++ b/include/linux/toshiba.h
@@ -16,25 +16,10 @@
* General Public License for more details.
*
*/
-
#ifndef _LINUX_TOSHIBA_H
#define _LINUX_TOSHIBA_H
-#define TOSH_PROC "/proc/toshiba"
-#define TOSH_DEVICE "/dev/toshiba"
-#define TOSH_SMM _IOWR('t', 0x90, int) /* broken: meant 24 bytes */
+#include <uapi/linux/toshiba.h>
-typedef struct {
- unsigned int eax;
- unsigned int ebx __attribute__ ((packed));
- unsigned int ecx __attribute__ ((packed));
- unsigned int edx __attribute__ ((packed));
- unsigned int esi __attribute__ ((packed));
- unsigned int edi __attribute__ ((packed));
-} SMMRegisters;
-
-#ifdef __KERNEL__
int tosh_smm(SMMRegisters *regs);
-#endif /* __KERNEL__ */
-
#endif
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 4f6c59a..f0b4eb4 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -1,41 +1,6 @@
#ifndef _LINUX_TTY_H
#define _LINUX_TTY_H
-/*
- * 'tty.h' defines some structures used by tty_io.c and some defines.
- */
-
-#define NR_LDISCS 30
-
-/* line disciplines */
-#define N_TTY 0
-#define N_SLIP 1
-#define N_MOUSE 2
-#define N_PPP 3
-#define N_STRIP 4
-#define N_AX25 5
-#define N_X25 6 /* X.25 async */
-#define N_6PACK 7
-#define N_MASC 8 /* Reserved for Mobitex module <kaz@cafe.net> */
-#define N_R3964 9 /* Reserved for Simatic R3964 module */
-#define N_PROFIBUS_FDL 10 /* Reserved for Profibus */
-#define N_IRDA 11 /* Linux IrDa - http://irda.sourceforge.net/ */
-#define N_SMSBLOCK 12 /* SMS block mode - for talking to GSM data */
- /* cards about SMS messages */
-#define N_HDLC 13 /* synchronous HDLC */
-#define N_SYNC_PPP 14 /* synchronous PPP */
-#define N_HCI 15 /* Bluetooth HCI UART */
-#define N_GIGASET_M101 16 /* Siemens Gigaset M101 serial DECT adapter */
-#define N_SLCAN 17 /* Serial / USB serial CAN Adaptors */
-#define N_PPS 18 /* Pulse per Second */
-#define N_V253 19 /* Codec control over voice modem */
-#define N_CAIF 20 /* CAIF protocol for talking to modems */
-#define N_GSM0710 21 /* GSM 0710 Mux */
-#define N_TI_WL 22 /* for TI's WL BT, FM, GPS combo chips */
-#define N_TRACESINK 23 /* Trace data routing for MIPI P1149.7 */
-#define N_TRACEROUTER 24 /* Trace data routing for MIPI P1149.7 */
-
-#ifdef __KERNEL__
#include <linux/fs.h>
#include <linux/major.h>
#include <linux/termios.h>
@@ -44,6 +9,7 @@
#include <linux/tty_ldisc.h>
#include <linux/mutex.h>
#include <linux/tty_flags.h>
+#include <uapi/linux/tty.h>
@@ -694,5 +660,4 @@
} while (0)
-#endif /* __KERNEL__ */
#endif
diff --git a/include/linux/types.h b/include/linux/types.h
index bf0dd75..1cc0e4b 100644
--- a/include/linux/types.h
+++ b/include/linux/types.h
@@ -1,22 +1,13 @@
#ifndef _LINUX_TYPES_H
#define _LINUX_TYPES_H
-#include <asm/types.h>
+#define __EXPORTED_HEADERS__
+#include <uapi/linux/types.h>
#ifndef __ASSEMBLY__
-#ifdef __KERNEL__
#define DECLARE_BITMAP(name,bits) \
unsigned long name[BITS_TO_LONGS(bits)]
-#else
-#ifndef __EXPORTED_HEADERS__
-#warning "Attempt to use kernel headers from user space, see http://kernelnewbies.org/KernelHeaders"
-#endif /* __EXPORTED_HEADERS__ */
-#endif
-
-#include <linux/posix_types.h>
-
-#ifdef __KERNEL__
typedef __u32 __kernel_dev_t;
@@ -157,48 +148,12 @@
typedef u32 dma_addr_t;
#endif /* dma_addr_t */
-#endif /* __KERNEL__ */
-
-/*
- * Below are truly Linux-specific types that should never collide with
- * any application/library that wants linux/types.h.
- */
-
#ifdef __CHECKER__
-#define __bitwise__ __attribute__((bitwise))
#else
-#define __bitwise__
#endif
#ifdef __CHECK_ENDIAN__
-#define __bitwise __bitwise__
#else
-#define __bitwise
#endif
-
-typedef __u16 __bitwise __le16;
-typedef __u16 __bitwise __be16;
-typedef __u32 __bitwise __le32;
-typedef __u32 __bitwise __be32;
-typedef __u64 __bitwise __le64;
-typedef __u64 __bitwise __be64;
-
-typedef __u16 __bitwise __sum16;
-typedef __u32 __bitwise __wsum;
-
-/*
- * aligned_u64 should be used in defining kernel<->userspace ABIs to avoid
- * common 32/64-bit compat problems.
- * 64-bit values align to 4-byte boundaries on x86_32 (and possibly other
- * architectures) and to 8-byte boundaries on 64-bit architectures. The new
- * aligned_64 type enforces 8-byte alignment so that structs containing
- * aligned_64 values have the same alignment on 32-bit and 64-bit architectures.
- * No conversions are necessary between 32-bit user-space and a 64-bit kernel.
- */
-#define __aligned_u64 __u64 __attribute__((aligned(8)))
-#define __aligned_be64 __be64 __attribute__((aligned(8)))
-#define __aligned_le64 __le64 __attribute__((aligned(8)))
-
-#ifdef __KERNEL__
typedef unsigned __bitwise__ gfp_t;
typedef unsigned __bitwise__ fmode_t;
@@ -256,6 +211,5 @@
};
#define rcu_head callback_head
-#endif /* __KERNEL__ */
#endif /* __ASSEMBLY__ */
#endif /* _LINUX_TYPES_H */
diff --git a/include/linux/udp.h b/include/linux/udp.h
index 03f72a2..0b67d77 100644
--- a/include/linux/udp.h
+++ b/include/linux/udp.h
@@ -17,28 +17,10 @@
#ifndef _LINUX_UDP_H
#define _LINUX_UDP_H
-#include <linux/types.h>
-
-struct udphdr {
- __be16 source;
- __be16 dest;
- __be16 len;
- __sum16 check;
-};
-
-/* UDP socket options */
-#define UDP_CORK 1 /* Never send partially complete segments */
-#define UDP_ENCAP 100 /* Set the socket to accept encapsulated packets */
-
-/* UDP encapsulation types */
-#define UDP_ENCAP_ESPINUDP_NON_IKE 1 /* draft-ietf-ipsec-nat-t-ike-00/01 */
-#define UDP_ENCAP_ESPINUDP 2 /* draft-ietf-ipsec-udp-encaps-06 */
-#define UDP_ENCAP_L2TPINUDP 3 /* rfc2661 */
-
-#ifdef __KERNEL__
#include <net/inet_sock.h>
#include <linux/skbuff.h>
#include <net/netns/hash.h>
+#include <uapi/linux/udp.h>
static inline struct udphdr *udp_hdr(const struct sk_buff *skb)
{
@@ -96,6 +78,4 @@
#define IS_UDPLITE(__sk) (udp_sk(__sk)->pcflag)
-#endif
-
#endif /* _LINUX_UDP_H */
diff --git a/include/linux/uinput.h b/include/linux/uinput.h
index c454bbe..0a4487d3 100644
--- a/include/linux/uinput.h
+++ b/include/linux/uinput.h
@@ -1,5 +1,3 @@
-#ifndef __UINPUT_H_
-#define __UINPUT_H_
/*
* User level driver support for input subsystem
*
@@ -31,13 +29,11 @@
* 0.1 20/06/2002
* - first public version
*/
+#ifndef __UINPUT_H_
+#define __UINPUT_H_
-#include <linux/types.h>
-#include <linux/input.h>
+#include <uapi/linux/uinput.h>
-#define UINPUT_VERSION 3
-
-#ifdef __KERNEL__
#define UINPUT_NAME "uinput"
#define UINPUT_BUFFER_SIZE 16
#define UINPUT_NUM_REQUESTS 16
@@ -75,103 +71,4 @@
wait_queue_head_t requests_waitq;
spinlock_t requests_lock;
};
-#endif /* __KERNEL__ */
-
-struct uinput_ff_upload {
- __u32 request_id;
- __s32 retval;
- struct ff_effect effect;
- struct ff_effect old;
-};
-
-struct uinput_ff_erase {
- __u32 request_id;
- __s32 retval;
- __u32 effect_id;
-};
-
-/* ioctl */
-#define UINPUT_IOCTL_BASE 'U'
-#define UI_DEV_CREATE _IO(UINPUT_IOCTL_BASE, 1)
-#define UI_DEV_DESTROY _IO(UINPUT_IOCTL_BASE, 2)
-
-#define UI_SET_EVBIT _IOW(UINPUT_IOCTL_BASE, 100, int)
-#define UI_SET_KEYBIT _IOW(UINPUT_IOCTL_BASE, 101, int)
-#define UI_SET_RELBIT _IOW(UINPUT_IOCTL_BASE, 102, int)
-#define UI_SET_ABSBIT _IOW(UINPUT_IOCTL_BASE, 103, int)
-#define UI_SET_MSCBIT _IOW(UINPUT_IOCTL_BASE, 104, int)
-#define UI_SET_LEDBIT _IOW(UINPUT_IOCTL_BASE, 105, int)
-#define UI_SET_SNDBIT _IOW(UINPUT_IOCTL_BASE, 106, int)
-#define UI_SET_FFBIT _IOW(UINPUT_IOCTL_BASE, 107, int)
-#define UI_SET_PHYS _IOW(UINPUT_IOCTL_BASE, 108, char*)
-#define UI_SET_SWBIT _IOW(UINPUT_IOCTL_BASE, 109, int)
-#define UI_SET_PROPBIT _IOW(UINPUT_IOCTL_BASE, 110, int)
-
-#define UI_BEGIN_FF_UPLOAD _IOWR(UINPUT_IOCTL_BASE, 200, struct uinput_ff_upload)
-#define UI_END_FF_UPLOAD _IOW(UINPUT_IOCTL_BASE, 201, struct uinput_ff_upload)
-#define UI_BEGIN_FF_ERASE _IOWR(UINPUT_IOCTL_BASE, 202, struct uinput_ff_erase)
-#define UI_END_FF_ERASE _IOW(UINPUT_IOCTL_BASE, 203, struct uinput_ff_erase)
-
-/*
- * To write a force-feedback-capable driver, the upload_effect
- * and erase_effect callbacks in input_dev must be implemented.
- * The uinput driver will generate a fake input event when one of
- * these callbacks are invoked. The userspace code then uses
- * ioctls to retrieve additional parameters and send the return code.
- * The callback blocks until this return code is sent.
- *
- * The described callback mechanism is only used if ff_effects_max
- * is set.
- *
- * To implement upload_effect():
- * 1. Wait for an event with type == EV_UINPUT and code == UI_FF_UPLOAD.
- * A request ID will be given in 'value'.
- * 2. Allocate a uinput_ff_upload struct, fill in request_id with
- * the 'value' from the EV_UINPUT event.
- * 3. Issue a UI_BEGIN_FF_UPLOAD ioctl, giving it the
- * uinput_ff_upload struct. It will be filled in with the
- * ff_effects passed to upload_effect().
- * 4. Perform the effect upload, and place a return code back into
- the uinput_ff_upload struct.
- * 5. Issue a UI_END_FF_UPLOAD ioctl, also giving it the
- * uinput_ff_upload_effect struct. This will complete execution
- * of our upload_effect() handler.
- *
- * To implement erase_effect():
- * 1. Wait for an event with type == EV_UINPUT and code == UI_FF_ERASE.
- * A request ID will be given in 'value'.
- * 2. Allocate a uinput_ff_erase struct, fill in request_id with
- * the 'value' from the EV_UINPUT event.
- * 3. Issue a UI_BEGIN_FF_ERASE ioctl, giving it the
- * uinput_ff_erase struct. It will be filled in with the
- * effect ID passed to erase_effect().
- * 4. Perform the effect erasure, and place a return code back
- * into the uinput_ff_erase struct.
- * 5. Issue a UI_END_FF_ERASE ioctl, also giving it the
- * uinput_ff_erase_effect struct. This will complete execution
- * of our erase_effect() handler.
- */
-
-/*
- * This is the new event type, used only by uinput.
- * 'code' is UI_FF_UPLOAD or UI_FF_ERASE, and 'value'
- * is the unique request ID. This number was picked
- * arbitrarily, above EV_MAX (since the input system
- * never sees it) but in the range of a 16-bit int.
- */
-#define EV_UINPUT 0x0101
-#define UI_FF_UPLOAD 1
-#define UI_FF_ERASE 2
-
-#define UINPUT_MAX_NAME_SIZE 80
-struct uinput_user_dev {
- char name[UINPUT_MAX_NAME_SIZE];
- struct input_id id;
- __u32 ff_effects_max;
- __s32 absmax[ABS_CNT];
- __s32 absmin[ABS_CNT];
- __s32 absfuzz[ABS_CNT];
- __s32 absflat[ABS_CNT];
-};
#endif /* __UINPUT_H_ */
-
diff --git a/include/linux/uio.h b/include/linux/uio.h
index 98c1143..629aaf5 100644
--- a/include/linux/uio.h
+++ b/include/linux/uio.h
@@ -1,9 +1,3 @@
-#ifndef __LINUX_UIO_H
-#define __LINUX_UIO_H
-
-#include <linux/compiler.h>
-#include <linux/types.h>
-
/*
* Berkeley style UIO structures - Alan Cox 1994.
*
@@ -12,21 +6,11 @@
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
+#ifndef __LINUX_UIO_H
+#define __LINUX_UIO_H
-struct iovec
-{
- void __user *iov_base; /* BSD uses caddr_t (1003.1g requires void *) */
- __kernel_size_t iov_len; /* Must be size_t (1003.1g) */
-};
+#include <uapi/linux/uio.h>
-/*
- * UIO_MAXIOV shall be at least 16 1003.1g (5.4.1.1)
- */
-
-#define UIO_FASTIOV 8
-#define UIO_MAXIOV 1024
-
-#ifdef __KERNEL__
struct kvec {
void *iov_base; /* and that should *never* hold a userland pointer */
@@ -52,5 +36,3 @@
unsigned long iov_shorten(struct iovec *iov, unsigned long nr_segs, size_t to);
#endif
-
-#endif
diff --git a/include/linux/usbdevice_fs.h b/include/linux/usbdevice_fs.h
index 4abe28e4..04a2628 100644
--- a/include/linux/usbdevice_fs.h
+++ b/include/linux/usbdevice_fs.h
@@ -25,126 +25,11 @@
*/
/*****************************************************************************/
-
#ifndef _LINUX_USBDEVICE_FS_H
#define _LINUX_USBDEVICE_FS_H
-#include <linux/types.h>
-#include <linux/magic.h>
+#include <uapi/linux/usbdevice_fs.h>
-/* --------------------------------------------------------------------- */
-
-/* usbdevfs ioctl codes */
-
-struct usbdevfs_ctrltransfer {
- __u8 bRequestType;
- __u8 bRequest;
- __u16 wValue;
- __u16 wIndex;
- __u16 wLength;
- __u32 timeout; /* in milliseconds */
- void __user *data;
-};
-
-struct usbdevfs_bulktransfer {
- unsigned int ep;
- unsigned int len;
- unsigned int timeout; /* in milliseconds */
- void __user *data;
-};
-
-struct usbdevfs_setinterface {
- unsigned int interface;
- unsigned int altsetting;
-};
-
-struct usbdevfs_disconnectsignal {
- unsigned int signr;
- void __user *context;
-};
-
-#define USBDEVFS_MAXDRIVERNAME 255
-
-struct usbdevfs_getdriver {
- unsigned int interface;
- char driver[USBDEVFS_MAXDRIVERNAME + 1];
-};
-
-struct usbdevfs_connectinfo {
- unsigned int devnum;
- unsigned char slow;
-};
-
-#define USBDEVFS_URB_SHORT_NOT_OK 0x01
-#define USBDEVFS_URB_ISO_ASAP 0x02
-#define USBDEVFS_URB_BULK_CONTINUATION 0x04
-#define USBDEVFS_URB_NO_FSBR 0x20
-#define USBDEVFS_URB_ZERO_PACKET 0x40
-#define USBDEVFS_URB_NO_INTERRUPT 0x80
-
-#define USBDEVFS_URB_TYPE_ISO 0
-#define USBDEVFS_URB_TYPE_INTERRUPT 1
-#define USBDEVFS_URB_TYPE_CONTROL 2
-#define USBDEVFS_URB_TYPE_BULK 3
-
-struct usbdevfs_iso_packet_desc {
- unsigned int length;
- unsigned int actual_length;
- unsigned int status;
-};
-
-struct usbdevfs_urb {
- unsigned char type;
- unsigned char endpoint;
- int status;
- unsigned int flags;
- void __user *buffer;
- int buffer_length;
- int actual_length;
- int start_frame;
- int number_of_packets;
- int error_count;
- unsigned int signr; /* signal to be sent on completion,
- or 0 if none should be sent. */
- void __user *usercontext;
- struct usbdevfs_iso_packet_desc iso_frame_desc[0];
-};
-
-/* ioctls for talking directly to drivers */
-struct usbdevfs_ioctl {
- int ifno; /* interface 0..N ; negative numbers reserved */
- int ioctl_code; /* MUST encode size + direction of data so the
- * macros in <asm/ioctl.h> give correct values */
- void __user *data; /* param buffer (in, or out) */
-};
-
-/* You can do most things with hubs just through control messages,
- * except find out what device connects to what port. */
-struct usbdevfs_hub_portinfo {
- char nports; /* number of downstream ports in this hub */
- char port [127]; /* e.g. port 3 connects to device 27 */
-};
-
-/* Device capability flags */
-#define USBDEVFS_CAP_ZERO_PACKET 0x01
-#define USBDEVFS_CAP_BULK_CONTINUATION 0x02
-#define USBDEVFS_CAP_NO_PACKET_SIZE_LIM 0x04
-#define USBDEVFS_CAP_BULK_SCATTER_GATHER 0x08
-
-/* USBDEVFS_DISCONNECT_CLAIM flags & struct */
-
-/* disconnect-and-claim if the driver matches the driver field */
-#define USBDEVFS_DISCONNECT_CLAIM_IF_DRIVER 0x01
-/* disconnect-and-claim except when the driver matches the driver field */
-#define USBDEVFS_DISCONNECT_CLAIM_EXCEPT_DRIVER 0x02
-
-struct usbdevfs_disconnect_claim {
- unsigned int interface;
- unsigned int flags;
- char driver[USBDEVFS_MAXDRIVERNAME + 1];
-};
-
-#ifdef __KERNEL__
#ifdef CONFIG_COMPAT
#include <linux/compat.h>
@@ -192,38 +77,4 @@
compat_caddr_t data;
};
#endif
-#endif /* __KERNEL__ */
-
-#define USBDEVFS_CONTROL _IOWR('U', 0, struct usbdevfs_ctrltransfer)
-#define USBDEVFS_CONTROL32 _IOWR('U', 0, struct usbdevfs_ctrltransfer32)
-#define USBDEVFS_BULK _IOWR('U', 2, struct usbdevfs_bulktransfer)
-#define USBDEVFS_BULK32 _IOWR('U', 2, struct usbdevfs_bulktransfer32)
-#define USBDEVFS_RESETEP _IOR('U', 3, unsigned int)
-#define USBDEVFS_SETINTERFACE _IOR('U', 4, struct usbdevfs_setinterface)
-#define USBDEVFS_SETCONFIGURATION _IOR('U', 5, unsigned int)
-#define USBDEVFS_GETDRIVER _IOW('U', 8, struct usbdevfs_getdriver)
-#define USBDEVFS_SUBMITURB _IOR('U', 10, struct usbdevfs_urb)
-#define USBDEVFS_SUBMITURB32 _IOR('U', 10, struct usbdevfs_urb32)
-#define USBDEVFS_DISCARDURB _IO('U', 11)
-#define USBDEVFS_REAPURB _IOW('U', 12, void *)
-#define USBDEVFS_REAPURB32 _IOW('U', 12, __u32)
-#define USBDEVFS_REAPURBNDELAY _IOW('U', 13, void *)
-#define USBDEVFS_REAPURBNDELAY32 _IOW('U', 13, __u32)
-#define USBDEVFS_DISCSIGNAL _IOR('U', 14, struct usbdevfs_disconnectsignal)
-#define USBDEVFS_DISCSIGNAL32 _IOR('U', 14, struct usbdevfs_disconnectsignal32)
-#define USBDEVFS_CLAIMINTERFACE _IOR('U', 15, unsigned int)
-#define USBDEVFS_RELEASEINTERFACE _IOR('U', 16, unsigned int)
-#define USBDEVFS_CONNECTINFO _IOW('U', 17, struct usbdevfs_connectinfo)
-#define USBDEVFS_IOCTL _IOWR('U', 18, struct usbdevfs_ioctl)
-#define USBDEVFS_IOCTL32 _IOWR('U', 18, struct usbdevfs_ioctl32)
-#define USBDEVFS_HUB_PORTINFO _IOR('U', 19, struct usbdevfs_hub_portinfo)
-#define USBDEVFS_RESET _IO('U', 20)
-#define USBDEVFS_CLEAR_HALT _IOR('U', 21, unsigned int)
-#define USBDEVFS_DISCONNECT _IO('U', 22)
-#define USBDEVFS_CONNECT _IO('U', 23)
-#define USBDEVFS_CLAIM_PORT _IOR('U', 24, unsigned int)
-#define USBDEVFS_RELEASE_PORT _IOR('U', 25, unsigned int)
-#define USBDEVFS_GET_CAPABILITIES _IOR('U', 26, __u32)
-#define USBDEVFS_DISCONNECT_CLAIM _IOR('U', 27, struct usbdevfs_disconnect_claim)
-
#endif /* _LINUX_USBDEVICE_FS_H */
diff --git a/include/linux/utsname.h b/include/linux/utsname.h
index c714ed7..2b34520 100644
--- a/include/linux/utsname.h
+++ b/include/linux/utsname.h
@@ -1,41 +1,12 @@
#ifndef _LINUX_UTSNAME_H
#define _LINUX_UTSNAME_H
-#define __OLD_UTS_LEN 8
-
-struct oldold_utsname {
- char sysname[9];
- char nodename[9];
- char release[9];
- char version[9];
- char machine[9];
-};
-
-#define __NEW_UTS_LEN 64
-
-struct old_utsname {
- char sysname[65];
- char nodename[65];
- char release[65];
- char version[65];
- char machine[65];
-};
-
-struct new_utsname {
- char sysname[__NEW_UTS_LEN + 1];
- char nodename[__NEW_UTS_LEN + 1];
- char release[__NEW_UTS_LEN + 1];
- char version[__NEW_UTS_LEN + 1];
- char machine[__NEW_UTS_LEN + 1];
- char domainname[__NEW_UTS_LEN + 1];
-};
-
-#ifdef __KERNEL__
#include <linux/sched.h>
#include <linux/kref.h>
#include <linux/nsproxy.h>
#include <linux/err.h>
+#include <uapi/linux/utsname.h>
enum uts_proc {
UTS_PROC_OSTYPE,
@@ -108,6 +79,4 @@
extern struct rw_semaphore uts_sem;
-#endif /* __KERNEL__ */
-
#endif /* _LINUX_UTSNAME_H */
diff --git a/include/linux/uuid.h b/include/linux/uuid.h
index f86c37b..6df2509 100644
--- a/include/linux/uuid.h
+++ b/include/linux/uuid.h
@@ -17,44 +17,11 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-
#ifndef _LINUX_UUID_H_
#define _LINUX_UUID_H_
-#include <linux/types.h>
-#include <linux/string.h>
+#include <uapi/linux/uuid.h>
-typedef struct {
- __u8 b[16];
-} uuid_le;
-
-typedef struct {
- __u8 b[16];
-} uuid_be;
-
-#define UUID_LE(a, b, c, d0, d1, d2, d3, d4, d5, d6, d7) \
-((uuid_le) \
-{{ (a) & 0xff, ((a) >> 8) & 0xff, ((a) >> 16) & 0xff, ((a) >> 24) & 0xff, \
- (b) & 0xff, ((b) >> 8) & 0xff, \
- (c) & 0xff, ((c) >> 8) & 0xff, \
- (d0), (d1), (d2), (d3), (d4), (d5), (d6), (d7) }})
-
-#define UUID_BE(a, b, c, d0, d1, d2, d3, d4, d5, d6, d7) \
-((uuid_be) \
-{{ ((a) >> 24) & 0xff, ((a) >> 16) & 0xff, ((a) >> 8) & 0xff, (a) & 0xff, \
- ((b) >> 8) & 0xff, (b) & 0xff, \
- ((c) >> 8) & 0xff, (c) & 0xff, \
- (d0), (d1), (d2), (d3), (d4), (d5), (d6), (d7) }})
-
-#define NULL_UUID_LE \
- UUID_LE(0x00000000, 0x0000, 0x0000, 0x00, 0x00, 0x00, 0x00, \
- 0x00, 0x00, 0x00, 0x00)
-
-#define NULL_UUID_BE \
- UUID_BE(0x00000000, 0x0000, 0x0000, 0x00, 0x00, 0x00, 0x00, \
- 0x00, 0x00, 0x00, 0x00)
-
-#ifdef __KERNEL__
static inline int uuid_le_cmp(const uuid_le u1, const uuid_le u2)
{
@@ -69,6 +36,4 @@
extern void uuid_le_gen(uuid_le *u);
extern void uuid_be_gen(uuid_be *u);
-#endif /* __KERNEL__ */
-
#endif
diff --git a/include/linux/vfio.h b/include/linux/vfio.h
index 0a4f180..ab9e862 100644
--- a/include/linux/vfio.h
+++ b/include/linux/vfio.h
@@ -11,15 +11,10 @@
#ifndef VFIO_H
#define VFIO_H
-#include <linux/types.h>
-#include <linux/ioctl.h>
-
-#define VFIO_API_VERSION 0
-
-#ifdef __KERNEL__ /* Internal VFIO-core/bus driver API */
#include <linux/iommu.h>
#include <linux/mm.h>
+#include <uapi/linux/vfio.h>
/**
* struct vfio_device_ops - VFIO bus driver device callbacks
@@ -92,354 +87,4 @@
TYPE tmp; \
offsetof(TYPE, MEMBER) + sizeof(tmp.MEMBER); }) \
-#endif /* __KERNEL__ */
-
-/* Kernel & User level defines for VFIO IOCTLs. */
-
-/* Extensions */
-
-#define VFIO_TYPE1_IOMMU 1
-
-/*
- * The IOCTL interface is designed for extensibility by embedding the
- * structure length (argsz) and flags into structures passed between
- * kernel and userspace. We therefore use the _IO() macro for these
- * defines to avoid implicitly embedding a size into the ioctl request.
- * As structure fields are added, argsz will increase to match and flag
- * bits will be defined to indicate additional fields with valid data.
- * It's *always* the caller's responsibility to indicate the size of
- * the structure passed by setting argsz appropriately.
- */
-
-#define VFIO_TYPE (';')
-#define VFIO_BASE 100
-
-/* -------- IOCTLs for VFIO file descriptor (/dev/vfio/vfio) -------- */
-
-/**
- * VFIO_GET_API_VERSION - _IO(VFIO_TYPE, VFIO_BASE + 0)
- *
- * Report the version of the VFIO API. This allows us to bump the entire
- * API version should we later need to add or change features in incompatible
- * ways.
- * Return: VFIO_API_VERSION
- * Availability: Always
- */
-#define VFIO_GET_API_VERSION _IO(VFIO_TYPE, VFIO_BASE + 0)
-
-/**
- * VFIO_CHECK_EXTENSION - _IOW(VFIO_TYPE, VFIO_BASE + 1, __u32)
- *
- * Check whether an extension is supported.
- * Return: 0 if not supported, 1 (or some other positive integer) if supported.
- * Availability: Always
- */
-#define VFIO_CHECK_EXTENSION _IO(VFIO_TYPE, VFIO_BASE + 1)
-
-/**
- * VFIO_SET_IOMMU - _IOW(VFIO_TYPE, VFIO_BASE + 2, __s32)
- *
- * Set the iommu to the given type. The type must be supported by an
- * iommu driver as verified by calling CHECK_EXTENSION using the same
- * type. A group must be set to this file descriptor before this
- * ioctl is available. The IOMMU interfaces enabled by this call are
- * specific to the value set.
- * Return: 0 on success, -errno on failure
- * Availability: When VFIO group attached
- */
-#define VFIO_SET_IOMMU _IO(VFIO_TYPE, VFIO_BASE + 2)
-
-/* -------- IOCTLs for GROUP file descriptors (/dev/vfio/$GROUP) -------- */
-
-/**
- * VFIO_GROUP_GET_STATUS - _IOR(VFIO_TYPE, VFIO_BASE + 3,
- * struct vfio_group_status)
- *
- * Retrieve information about the group. Fills in provided
- * struct vfio_group_info. Caller sets argsz.
- * Return: 0 on succes, -errno on failure.
- * Availability: Always
- */
-struct vfio_group_status {
- __u32 argsz;
- __u32 flags;
-#define VFIO_GROUP_FLAGS_VIABLE (1 << 0)
-#define VFIO_GROUP_FLAGS_CONTAINER_SET (1 << 1)
-};
-#define VFIO_GROUP_GET_STATUS _IO(VFIO_TYPE, VFIO_BASE + 3)
-
-/**
- * VFIO_GROUP_SET_CONTAINER - _IOW(VFIO_TYPE, VFIO_BASE + 4, __s32)
- *
- * Set the container for the VFIO group to the open VFIO file
- * descriptor provided. Groups may only belong to a single
- * container. Containers may, at their discretion, support multiple
- * groups. Only when a container is set are all of the interfaces
- * of the VFIO file descriptor and the VFIO group file descriptor
- * available to the user.
- * Return: 0 on success, -errno on failure.
- * Availability: Always
- */
-#define VFIO_GROUP_SET_CONTAINER _IO(VFIO_TYPE, VFIO_BASE + 4)
-
-/**
- * VFIO_GROUP_UNSET_CONTAINER - _IO(VFIO_TYPE, VFIO_BASE + 5)
- *
- * Remove the group from the attached container. This is the
- * opposite of the SET_CONTAINER call and returns the group to
- * an initial state. All device file descriptors must be released
- * prior to calling this interface. When removing the last group
- * from a container, the IOMMU will be disabled and all state lost,
- * effectively also returning the VFIO file descriptor to an initial
- * state.
- * Return: 0 on success, -errno on failure.
- * Availability: When attached to container
- */
-#define VFIO_GROUP_UNSET_CONTAINER _IO(VFIO_TYPE, VFIO_BASE + 5)
-
-/**
- * VFIO_GROUP_GET_DEVICE_FD - _IOW(VFIO_TYPE, VFIO_BASE + 6, char)
- *
- * Return a new file descriptor for the device object described by
- * the provided string. The string should match a device listed in
- * the devices subdirectory of the IOMMU group sysfs entry. The
- * group containing the device must already be added to this context.
- * Return: new file descriptor on success, -errno on failure.
- * Availability: When attached to container
- */
-#define VFIO_GROUP_GET_DEVICE_FD _IO(VFIO_TYPE, VFIO_BASE + 6)
-
-/* --------------- IOCTLs for DEVICE file descriptors --------------- */
-
-/**
- * VFIO_DEVICE_GET_INFO - _IOR(VFIO_TYPE, VFIO_BASE + 7,
- * struct vfio_device_info)
- *
- * Retrieve information about the device. Fills in provided
- * struct vfio_device_info. Caller sets argsz.
- * Return: 0 on success, -errno on failure.
- */
-struct vfio_device_info {
- __u32 argsz;
- __u32 flags;
-#define VFIO_DEVICE_FLAGS_RESET (1 << 0) /* Device supports reset */
-#define VFIO_DEVICE_FLAGS_PCI (1 << 1) /* vfio-pci device */
- __u32 num_regions; /* Max region index + 1 */
- __u32 num_irqs; /* Max IRQ index + 1 */
-};
-#define VFIO_DEVICE_GET_INFO _IO(VFIO_TYPE, VFIO_BASE + 7)
-
-/**
- * VFIO_DEVICE_GET_REGION_INFO - _IOWR(VFIO_TYPE, VFIO_BASE + 8,
- * struct vfio_region_info)
- *
- * Retrieve information about a device region. Caller provides
- * struct vfio_region_info with index value set. Caller sets argsz.
- * Implementation of region mapping is bus driver specific. This is
- * intended to describe MMIO, I/O port, as well as bus specific
- * regions (ex. PCI config space). Zero sized regions may be used
- * to describe unimplemented regions (ex. unimplemented PCI BARs).
- * Return: 0 on success, -errno on failure.
- */
-struct vfio_region_info {
- __u32 argsz;
- __u32 flags;
-#define VFIO_REGION_INFO_FLAG_READ (1 << 0) /* Region supports read */
-#define VFIO_REGION_INFO_FLAG_WRITE (1 << 1) /* Region supports write */
-#define VFIO_REGION_INFO_FLAG_MMAP (1 << 2) /* Region supports mmap */
- __u32 index; /* Region index */
- __u32 resv; /* Reserved for alignment */
- __u64 size; /* Region size (bytes) */
- __u64 offset; /* Region offset from start of device fd */
-};
-#define VFIO_DEVICE_GET_REGION_INFO _IO(VFIO_TYPE, VFIO_BASE + 8)
-
-/**
- * VFIO_DEVICE_GET_IRQ_INFO - _IOWR(VFIO_TYPE, VFIO_BASE + 9,
- * struct vfio_irq_info)
- *
- * Retrieve information about a device IRQ. Caller provides
- * struct vfio_irq_info with index value set. Caller sets argsz.
- * Implementation of IRQ mapping is bus driver specific. Indexes
- * using multiple IRQs are primarily intended to support MSI-like
- * interrupt blocks. Zero count irq blocks may be used to describe
- * unimplemented interrupt types.
- *
- * The EVENTFD flag indicates the interrupt index supports eventfd based
- * signaling.
- *
- * The MASKABLE flags indicates the index supports MASK and UNMASK
- * actions described below.
- *
- * AUTOMASKED indicates that after signaling, the interrupt line is
- * automatically masked by VFIO and the user needs to unmask the line
- * to receive new interrupts. This is primarily intended to distinguish
- * level triggered interrupts.
- *
- * The NORESIZE flag indicates that the interrupt lines within the index
- * are setup as a set and new subindexes cannot be enabled without first
- * disabling the entire index. This is used for interrupts like PCI MSI
- * and MSI-X where the driver may only use a subset of the available
- * indexes, but VFIO needs to enable a specific number of vectors
- * upfront. In the case of MSI-X, where the user can enable MSI-X and
- * then add and unmask vectors, it's up to userspace to make the decision
- * whether to allocate the maximum supported number of vectors or tear
- * down setup and incrementally increase the vectors as each is enabled.
- */
-struct vfio_irq_info {
- __u32 argsz;
- __u32 flags;
-#define VFIO_IRQ_INFO_EVENTFD (1 << 0)
-#define VFIO_IRQ_INFO_MASKABLE (1 << 1)
-#define VFIO_IRQ_INFO_AUTOMASKED (1 << 2)
-#define VFIO_IRQ_INFO_NORESIZE (1 << 3)
- __u32 index; /* IRQ index */
- __u32 count; /* Number of IRQs within this index */
-};
-#define VFIO_DEVICE_GET_IRQ_INFO _IO(VFIO_TYPE, VFIO_BASE + 9)
-
-/**
- * VFIO_DEVICE_SET_IRQS - _IOW(VFIO_TYPE, VFIO_BASE + 10, struct vfio_irq_set)
- *
- * Set signaling, masking, and unmasking of interrupts. Caller provides
- * struct vfio_irq_set with all fields set. 'start' and 'count' indicate
- * the range of subindexes being specified.
- *
- * The DATA flags specify the type of data provided. If DATA_NONE, the
- * operation performs the specified action immediately on the specified
- * interrupt(s). For example, to unmask AUTOMASKED interrupt [0,0]:
- * flags = (DATA_NONE|ACTION_UNMASK), index = 0, start = 0, count = 1.
- *
- * DATA_BOOL allows sparse support for the same on arrays of interrupts.
- * For example, to mask interrupts [0,1] and [0,3] (but not [0,2]):
- * flags = (DATA_BOOL|ACTION_MASK), index = 0, start = 1, count = 3,
- * data = {1,0,1}
- *
- * DATA_EVENTFD binds the specified ACTION to the provided __s32 eventfd.
- * A value of -1 can be used to either de-assign interrupts if already
- * assigned or skip un-assigned interrupts. For example, to set an eventfd
- * to be trigger for interrupts [0,0] and [0,2]:
- * flags = (DATA_EVENTFD|ACTION_TRIGGER), index = 0, start = 0, count = 3,
- * data = {fd1, -1, fd2}
- * If index [0,1] is previously set, two count = 1 ioctls calls would be
- * required to set [0,0] and [0,2] without changing [0,1].
- *
- * Once a signaling mechanism is set, DATA_BOOL or DATA_NONE can be used
- * with ACTION_TRIGGER to perform kernel level interrupt loopback testing
- * from userspace (ie. simulate hardware triggering).
- *
- * Setting of an event triggering mechanism to userspace for ACTION_TRIGGER
- * enables the interrupt index for the device. Individual subindex interrupts
- * can be disabled using the -1 value for DATA_EVENTFD or the index can be
- * disabled as a whole with: flags = (DATA_NONE|ACTION_TRIGGER), count = 0.
- *
- * Note that ACTION_[UN]MASK specify user->kernel signaling (irqfds) while
- * ACTION_TRIGGER specifies kernel->user signaling.
- */
-struct vfio_irq_set {
- __u32 argsz;
- __u32 flags;
-#define VFIO_IRQ_SET_DATA_NONE (1 << 0) /* Data not present */
-#define VFIO_IRQ_SET_DATA_BOOL (1 << 1) /* Data is bool (u8) */
-#define VFIO_IRQ_SET_DATA_EVENTFD (1 << 2) /* Data is eventfd (s32) */
-#define VFIO_IRQ_SET_ACTION_MASK (1 << 3) /* Mask interrupt */
-#define VFIO_IRQ_SET_ACTION_UNMASK (1 << 4) /* Unmask interrupt */
-#define VFIO_IRQ_SET_ACTION_TRIGGER (1 << 5) /* Trigger interrupt */
- __u32 index;
- __u32 start;
- __u32 count;
- __u8 data[];
-};
-#define VFIO_DEVICE_SET_IRQS _IO(VFIO_TYPE, VFIO_BASE + 10)
-
-#define VFIO_IRQ_SET_DATA_TYPE_MASK (VFIO_IRQ_SET_DATA_NONE | \
- VFIO_IRQ_SET_DATA_BOOL | \
- VFIO_IRQ_SET_DATA_EVENTFD)
-#define VFIO_IRQ_SET_ACTION_TYPE_MASK (VFIO_IRQ_SET_ACTION_MASK | \
- VFIO_IRQ_SET_ACTION_UNMASK | \
- VFIO_IRQ_SET_ACTION_TRIGGER)
-/**
- * VFIO_DEVICE_RESET - _IO(VFIO_TYPE, VFIO_BASE + 11)
- *
- * Reset a device.
- */
-#define VFIO_DEVICE_RESET _IO(VFIO_TYPE, VFIO_BASE + 11)
-
-/*
- * The VFIO-PCI bus driver makes use of the following fixed region and
- * IRQ index mapping. Unimplemented regions return a size of zero.
- * Unimplemented IRQ types return a count of zero.
- */
-
-enum {
- VFIO_PCI_BAR0_REGION_INDEX,
- VFIO_PCI_BAR1_REGION_INDEX,
- VFIO_PCI_BAR2_REGION_INDEX,
- VFIO_PCI_BAR3_REGION_INDEX,
- VFIO_PCI_BAR4_REGION_INDEX,
- VFIO_PCI_BAR5_REGION_INDEX,
- VFIO_PCI_ROM_REGION_INDEX,
- VFIO_PCI_CONFIG_REGION_INDEX,
- VFIO_PCI_NUM_REGIONS
-};
-
-enum {
- VFIO_PCI_INTX_IRQ_INDEX,
- VFIO_PCI_MSI_IRQ_INDEX,
- VFIO_PCI_MSIX_IRQ_INDEX,
- VFIO_PCI_NUM_IRQS
-};
-
-/* -------- API for Type1 VFIO IOMMU -------- */
-
-/**
- * VFIO_IOMMU_GET_INFO - _IOR(VFIO_TYPE, VFIO_BASE + 12, struct vfio_iommu_info)
- *
- * Retrieve information about the IOMMU object. Fills in provided
- * struct vfio_iommu_info. Caller sets argsz.
- *
- * XXX Should we do these by CHECK_EXTENSION too?
- */
-struct vfio_iommu_type1_info {
- __u32 argsz;
- __u32 flags;
-#define VFIO_IOMMU_INFO_PGSIZES (1 << 0) /* supported page sizes info */
- __u64 iova_pgsizes; /* Bitmap of supported page sizes */
-};
-
-#define VFIO_IOMMU_GET_INFO _IO(VFIO_TYPE, VFIO_BASE + 12)
-
-/**
- * VFIO_IOMMU_MAP_DMA - _IOW(VFIO_TYPE, VFIO_BASE + 13, struct vfio_dma_map)
- *
- * Map process virtual addresses to IO virtual addresses using the
- * provided struct vfio_dma_map. Caller sets argsz. READ &/ WRITE required.
- */
-struct vfio_iommu_type1_dma_map {
- __u32 argsz;
- __u32 flags;
-#define VFIO_DMA_MAP_FLAG_READ (1 << 0) /* readable from device */
-#define VFIO_DMA_MAP_FLAG_WRITE (1 << 1) /* writable from device */
- __u64 vaddr; /* Process virtual address */
- __u64 iova; /* IO virtual address */
- __u64 size; /* Size of mapping (bytes) */
-};
-
-#define VFIO_IOMMU_MAP_DMA _IO(VFIO_TYPE, VFIO_BASE + 13)
-
-/**
- * VFIO_IOMMU_UNMAP_DMA - _IOW(VFIO_TYPE, VFIO_BASE + 14, struct vfio_dma_unmap)
- *
- * Unmap IO virtual addresses using the provided struct vfio_dma_unmap.
- * Caller sets argsz.
- */
-struct vfio_iommu_type1_dma_unmap {
- __u32 argsz;
- __u32 flags;
- __u64 iova; /* IO virtual address */
- __u64 size; /* Size of mapping (bytes) */
-};
-
-#define VFIO_IOMMU_UNMAP_DMA _IO(VFIO_TYPE, VFIO_BASE + 14)
-
#endif /* VFIO_H */
diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h
index 873adbe..73ea2fb 100644
--- a/include/linux/videodev2.h
+++ b/include/linux/videodev2.h
@@ -56,1945 +56,7 @@
#ifndef __LINUX_VIDEODEV2_H
#define __LINUX_VIDEODEV2_H
-#ifdef __KERNEL__
#include <linux/time.h> /* need struct timeval */
-#else
-#include <sys/time.h>
-#endif
-#include <linux/compiler.h>
-#include <linux/ioctl.h>
-#include <linux/types.h>
-#include <linux/v4l2-common.h>
-#include <linux/v4l2-controls.h>
-
-/*
- * Common stuff for both V4L1 and V4L2
- * Moved from videodev.h
- */
-#define VIDEO_MAX_FRAME 32
-#define VIDEO_MAX_PLANES 8
-
-#ifndef __KERNEL__
-
-/* These defines are V4L1 specific and should not be used with the V4L2 API!
- They will be removed from this header in the future. */
-
-#define VID_TYPE_CAPTURE 1 /* Can capture */
-#define VID_TYPE_TUNER 2 /* Can tune */
-#define VID_TYPE_TELETEXT 4 /* Does teletext */
-#define VID_TYPE_OVERLAY 8 /* Overlay onto frame buffer */
-#define VID_TYPE_CHROMAKEY 16 /* Overlay by chromakey */
-#define VID_TYPE_CLIPPING 32 /* Can clip */
-#define VID_TYPE_FRAMERAM 64 /* Uses the frame buffer memory */
-#define VID_TYPE_SCALES 128 /* Scalable */
-#define VID_TYPE_MONOCHROME 256 /* Monochrome only */
-#define VID_TYPE_SUBCAPTURE 512 /* Can capture subareas of the image */
-#define VID_TYPE_MPEG_DECODER 1024 /* Can decode MPEG streams */
-#define VID_TYPE_MPEG_ENCODER 2048 /* Can encode MPEG streams */
-#define VID_TYPE_MJPEG_DECODER 4096 /* Can decode MJPEG streams */
-#define VID_TYPE_MJPEG_ENCODER 8192 /* Can encode MJPEG streams */
-#endif
-
-/*
- * M I S C E L L A N E O U S
- */
-
-/* Four-character-code (FOURCC) */
-#define v4l2_fourcc(a, b, c, d)\
- ((__u32)(a) | ((__u32)(b) << 8) | ((__u32)(c) << 16) | ((__u32)(d) << 24))
-
-/*
- * E N U M S
- */
-enum v4l2_field {
- V4L2_FIELD_ANY = 0, /* driver can choose from none,
- top, bottom, interlaced
- depending on whatever it thinks
- is approximate ... */
- V4L2_FIELD_NONE = 1, /* this device has no fields ... */
- V4L2_FIELD_TOP = 2, /* top field only */
- V4L2_FIELD_BOTTOM = 3, /* bottom field only */
- V4L2_FIELD_INTERLACED = 4, /* both fields interlaced */
- V4L2_FIELD_SEQ_TB = 5, /* both fields sequential into one
- buffer, top-bottom order */
- V4L2_FIELD_SEQ_BT = 6, /* same as above + bottom-top order */
- V4L2_FIELD_ALTERNATE = 7, /* both fields alternating into
- separate buffers */
- V4L2_FIELD_INTERLACED_TB = 8, /* both fields interlaced, top field
- first and the top field is
- transmitted first */
- V4L2_FIELD_INTERLACED_BT = 9, /* both fields interlaced, top field
- first and the bottom field is
- transmitted first */
-};
-#define V4L2_FIELD_HAS_TOP(field) \
- ((field) == V4L2_FIELD_TOP ||\
- (field) == V4L2_FIELD_INTERLACED ||\
- (field) == V4L2_FIELD_INTERLACED_TB ||\
- (field) == V4L2_FIELD_INTERLACED_BT ||\
- (field) == V4L2_FIELD_SEQ_TB ||\
- (field) == V4L2_FIELD_SEQ_BT)
-#define V4L2_FIELD_HAS_BOTTOM(field) \
- ((field) == V4L2_FIELD_BOTTOM ||\
- (field) == V4L2_FIELD_INTERLACED ||\
- (field) == V4L2_FIELD_INTERLACED_TB ||\
- (field) == V4L2_FIELD_INTERLACED_BT ||\
- (field) == V4L2_FIELD_SEQ_TB ||\
- (field) == V4L2_FIELD_SEQ_BT)
-#define V4L2_FIELD_HAS_BOTH(field) \
- ((field) == V4L2_FIELD_INTERLACED ||\
- (field) == V4L2_FIELD_INTERLACED_TB ||\
- (field) == V4L2_FIELD_INTERLACED_BT ||\
- (field) == V4L2_FIELD_SEQ_TB ||\
- (field) == V4L2_FIELD_SEQ_BT)
-
-enum v4l2_buf_type {
- V4L2_BUF_TYPE_VIDEO_CAPTURE = 1,
- V4L2_BUF_TYPE_VIDEO_OUTPUT = 2,
- V4L2_BUF_TYPE_VIDEO_OVERLAY = 3,
- V4L2_BUF_TYPE_VBI_CAPTURE = 4,
- V4L2_BUF_TYPE_VBI_OUTPUT = 5,
- V4L2_BUF_TYPE_SLICED_VBI_CAPTURE = 6,
- V4L2_BUF_TYPE_SLICED_VBI_OUTPUT = 7,
-#if 1
- /* Experimental */
- V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY = 8,
-#endif
- V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE = 9,
- V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE = 10,
- /* Deprecated, do not use */
- V4L2_BUF_TYPE_PRIVATE = 0x80,
-};
-
-#define V4L2_TYPE_IS_MULTIPLANAR(type) \
- ((type) == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE \
- || (type) == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE)
-
-#define V4L2_TYPE_IS_OUTPUT(type) \
- ((type) == V4L2_BUF_TYPE_VIDEO_OUTPUT \
- || (type) == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE \
- || (type) == V4L2_BUF_TYPE_VIDEO_OVERLAY \
- || (type) == V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY \
- || (type) == V4L2_BUF_TYPE_VBI_OUTPUT \
- || (type) == V4L2_BUF_TYPE_SLICED_VBI_OUTPUT)
-
-enum v4l2_tuner_type {
- V4L2_TUNER_RADIO = 1,
- V4L2_TUNER_ANALOG_TV = 2,
- V4L2_TUNER_DIGITAL_TV = 3,
-};
-
-enum v4l2_memory {
- V4L2_MEMORY_MMAP = 1,
- V4L2_MEMORY_USERPTR = 2,
- V4L2_MEMORY_OVERLAY = 3,
-};
-
-/* see also http://vektor.theorem.ca/graphics/ycbcr/ */
-enum v4l2_colorspace {
- /* ITU-R 601 -- broadcast NTSC/PAL */
- V4L2_COLORSPACE_SMPTE170M = 1,
-
- /* 1125-Line (US) HDTV */
- V4L2_COLORSPACE_SMPTE240M = 2,
-
- /* HD and modern captures. */
- V4L2_COLORSPACE_REC709 = 3,
-
- /* broken BT878 extents (601, luma range 16-253 instead of 16-235) */
- V4L2_COLORSPACE_BT878 = 4,
-
- /* These should be useful. Assume 601 extents. */
- V4L2_COLORSPACE_470_SYSTEM_M = 5,
- V4L2_COLORSPACE_470_SYSTEM_BG = 6,
-
- /* I know there will be cameras that send this. So, this is
- * unspecified chromaticities and full 0-255 on each of the
- * Y'CbCr components
- */
- V4L2_COLORSPACE_JPEG = 7,
-
- /* For RGB colourspaces, this is probably a good start. */
- V4L2_COLORSPACE_SRGB = 8,
-};
-
-enum v4l2_priority {
- V4L2_PRIORITY_UNSET = 0, /* not initialized */
- V4L2_PRIORITY_BACKGROUND = 1,
- V4L2_PRIORITY_INTERACTIVE = 2,
- V4L2_PRIORITY_RECORD = 3,
- V4L2_PRIORITY_DEFAULT = V4L2_PRIORITY_INTERACTIVE,
-};
-
-struct v4l2_rect {
- __s32 left;
- __s32 top;
- __s32 width;
- __s32 height;
-};
-
-struct v4l2_fract {
- __u32 numerator;
- __u32 denominator;
-};
-
-/**
- * struct v4l2_capability - Describes V4L2 device caps returned by VIDIOC_QUERYCAP
- *
- * @driver: name of the driver module (e.g. "bttv")
- * @card: name of the card (e.g. "Hauppauge WinTV")
- * @bus_info: name of the bus (e.g. "PCI:" + pci_name(pci_dev) )
- * @version: KERNEL_VERSION
- * @capabilities: capabilities of the physical device as a whole
- * @device_caps: capabilities accessed via this particular device (node)
- * @reserved: reserved fields for future extensions
- */
-struct v4l2_capability {
- __u8 driver[16];
- __u8 card[32];
- __u8 bus_info[32];
- __u32 version;
- __u32 capabilities;
- __u32 device_caps;
- __u32 reserved[3];
-};
-
-/* Values for 'capabilities' field */
-#define V4L2_CAP_VIDEO_CAPTURE 0x00000001 /* Is a video capture device */
-#define V4L2_CAP_VIDEO_OUTPUT 0x00000002 /* Is a video output device */
-#define V4L2_CAP_VIDEO_OVERLAY 0x00000004 /* Can do video overlay */
-#define V4L2_CAP_VBI_CAPTURE 0x00000010 /* Is a raw VBI capture device */
-#define V4L2_CAP_VBI_OUTPUT 0x00000020 /* Is a raw VBI output device */
-#define V4L2_CAP_SLICED_VBI_CAPTURE 0x00000040 /* Is a sliced VBI capture device */
-#define V4L2_CAP_SLICED_VBI_OUTPUT 0x00000080 /* Is a sliced VBI output device */
-#define V4L2_CAP_RDS_CAPTURE 0x00000100 /* RDS data capture */
-#define V4L2_CAP_VIDEO_OUTPUT_OVERLAY 0x00000200 /* Can do video output overlay */
-#define V4L2_CAP_HW_FREQ_SEEK 0x00000400 /* Can do hardware frequency seek */
-#define V4L2_CAP_RDS_OUTPUT 0x00000800 /* Is an RDS encoder */
-
-/* Is a video capture device that supports multiplanar formats */
-#define V4L2_CAP_VIDEO_CAPTURE_MPLANE 0x00001000
-/* Is a video output device that supports multiplanar formats */
-#define V4L2_CAP_VIDEO_OUTPUT_MPLANE 0x00002000
-/* Is a video mem-to-mem device that supports multiplanar formats */
-#define V4L2_CAP_VIDEO_M2M_MPLANE 0x00004000
-/* Is a video mem-to-mem device */
-#define V4L2_CAP_VIDEO_M2M 0x00008000
-
-#define V4L2_CAP_TUNER 0x00010000 /* has a tuner */
-#define V4L2_CAP_AUDIO 0x00020000 /* has audio support */
-#define V4L2_CAP_RADIO 0x00040000 /* is a radio device */
-#define V4L2_CAP_MODULATOR 0x00080000 /* has a modulator */
-
-#define V4L2_CAP_READWRITE 0x01000000 /* read/write systemcalls */
-#define V4L2_CAP_ASYNCIO 0x02000000 /* async I/O */
-#define V4L2_CAP_STREAMING 0x04000000 /* streaming I/O ioctls */
-
-#define V4L2_CAP_DEVICE_CAPS 0x80000000 /* sets device capabilities field */
-
-/*
- * V I D E O I M A G E F O R M A T
- */
-struct v4l2_pix_format {
- __u32 width;
- __u32 height;
- __u32 pixelformat;
- __u32 field; /* enum v4l2_field */
- __u32 bytesperline; /* for padding, zero if unused */
- __u32 sizeimage;
- __u32 colorspace; /* enum v4l2_colorspace */
- __u32 priv; /* private data, depends on pixelformat */
-};
-
-/* Pixel format FOURCC depth Description */
-
-/* RGB formats */
-#define V4L2_PIX_FMT_RGB332 v4l2_fourcc('R', 'G', 'B', '1') /* 8 RGB-3-3-2 */
-#define V4L2_PIX_FMT_RGB444 v4l2_fourcc('R', '4', '4', '4') /* 16 xxxxrrrr ggggbbbb */
-#define V4L2_PIX_FMT_RGB555 v4l2_fourcc('R', 'G', 'B', 'O') /* 16 RGB-5-5-5 */
-#define V4L2_PIX_FMT_RGB565 v4l2_fourcc('R', 'G', 'B', 'P') /* 16 RGB-5-6-5 */
-#define V4L2_PIX_FMT_RGB555X v4l2_fourcc('R', 'G', 'B', 'Q') /* 16 RGB-5-5-5 BE */
-#define V4L2_PIX_FMT_RGB565X v4l2_fourcc('R', 'G', 'B', 'R') /* 16 RGB-5-6-5 BE */
-#define V4L2_PIX_FMT_BGR666 v4l2_fourcc('B', 'G', 'R', 'H') /* 18 BGR-6-6-6 */
-#define V4L2_PIX_FMT_BGR24 v4l2_fourcc('B', 'G', 'R', '3') /* 24 BGR-8-8-8 */
-#define V4L2_PIX_FMT_RGB24 v4l2_fourcc('R', 'G', 'B', '3') /* 24 RGB-8-8-8 */
-#define V4L2_PIX_FMT_BGR32 v4l2_fourcc('B', 'G', 'R', '4') /* 32 BGR-8-8-8-8 */
-#define V4L2_PIX_FMT_RGB32 v4l2_fourcc('R', 'G', 'B', '4') /* 32 RGB-8-8-8-8 */
-
-/* Grey formats */
-#define V4L2_PIX_FMT_GREY v4l2_fourcc('G', 'R', 'E', 'Y') /* 8 Greyscale */
-#define V4L2_PIX_FMT_Y4 v4l2_fourcc('Y', '0', '4', ' ') /* 4 Greyscale */
-#define V4L2_PIX_FMT_Y6 v4l2_fourcc('Y', '0', '6', ' ') /* 6 Greyscale */
-#define V4L2_PIX_FMT_Y10 v4l2_fourcc('Y', '1', '0', ' ') /* 10 Greyscale */
-#define V4L2_PIX_FMT_Y12 v4l2_fourcc('Y', '1', '2', ' ') /* 12 Greyscale */
-#define V4L2_PIX_FMT_Y16 v4l2_fourcc('Y', '1', '6', ' ') /* 16 Greyscale */
-
-/* Grey bit-packed formats */
-#define V4L2_PIX_FMT_Y10BPACK v4l2_fourcc('Y', '1', '0', 'B') /* 10 Greyscale bit-packed */
-
-/* Palette formats */
-#define V4L2_PIX_FMT_PAL8 v4l2_fourcc('P', 'A', 'L', '8') /* 8 8-bit palette */
-
-/* Luminance+Chrominance formats */
-#define V4L2_PIX_FMT_YVU410 v4l2_fourcc('Y', 'V', 'U', '9') /* 9 YVU 4:1:0 */
-#define V4L2_PIX_FMT_YVU420 v4l2_fourcc('Y', 'V', '1', '2') /* 12 YVU 4:2:0 */
-#define V4L2_PIX_FMT_YUYV v4l2_fourcc('Y', 'U', 'Y', 'V') /* 16 YUV 4:2:2 */
-#define V4L2_PIX_FMT_YYUV v4l2_fourcc('Y', 'Y', 'U', 'V') /* 16 YUV 4:2:2 */
-#define V4L2_PIX_FMT_YVYU v4l2_fourcc('Y', 'V', 'Y', 'U') /* 16 YVU 4:2:2 */
-#define V4L2_PIX_FMT_UYVY v4l2_fourcc('U', 'Y', 'V', 'Y') /* 16 YUV 4:2:2 */
-#define V4L2_PIX_FMT_VYUY v4l2_fourcc('V', 'Y', 'U', 'Y') /* 16 YUV 4:2:2 */
-#define V4L2_PIX_FMT_YUV422P v4l2_fourcc('4', '2', '2', 'P') /* 16 YVU422 planar */
-#define V4L2_PIX_FMT_YUV411P v4l2_fourcc('4', '1', '1', 'P') /* 16 YVU411 planar */
-#define V4L2_PIX_FMT_Y41P v4l2_fourcc('Y', '4', '1', 'P') /* 12 YUV 4:1:1 */
-#define V4L2_PIX_FMT_YUV444 v4l2_fourcc('Y', '4', '4', '4') /* 16 xxxxyyyy uuuuvvvv */
-#define V4L2_PIX_FMT_YUV555 v4l2_fourcc('Y', 'U', 'V', 'O') /* 16 YUV-5-5-5 */
-#define V4L2_PIX_FMT_YUV565 v4l2_fourcc('Y', 'U', 'V', 'P') /* 16 YUV-5-6-5 */
-#define V4L2_PIX_FMT_YUV32 v4l2_fourcc('Y', 'U', 'V', '4') /* 32 YUV-8-8-8-8 */
-#define V4L2_PIX_FMT_YUV410 v4l2_fourcc('Y', 'U', 'V', '9') /* 9 YUV 4:1:0 */
-#define V4L2_PIX_FMT_YUV420 v4l2_fourcc('Y', 'U', '1', '2') /* 12 YUV 4:2:0 */
-#define V4L2_PIX_FMT_HI240 v4l2_fourcc('H', 'I', '2', '4') /* 8 8-bit color */
-#define V4L2_PIX_FMT_HM12 v4l2_fourcc('H', 'M', '1', '2') /* 8 YUV 4:2:0 16x16 macroblocks */
-#define V4L2_PIX_FMT_M420 v4l2_fourcc('M', '4', '2', '0') /* 12 YUV 4:2:0 2 lines y, 1 line uv interleaved */
-
-/* two planes -- one Y, one Cr + Cb interleaved */
-#define V4L2_PIX_FMT_NV12 v4l2_fourcc('N', 'V', '1', '2') /* 12 Y/CbCr 4:2:0 */
-#define V4L2_PIX_FMT_NV21 v4l2_fourcc('N', 'V', '2', '1') /* 12 Y/CrCb 4:2:0 */
-#define V4L2_PIX_FMT_NV16 v4l2_fourcc('N', 'V', '1', '6') /* 16 Y/CbCr 4:2:2 */
-#define V4L2_PIX_FMT_NV61 v4l2_fourcc('N', 'V', '6', '1') /* 16 Y/CrCb 4:2:2 */
-#define V4L2_PIX_FMT_NV24 v4l2_fourcc('N', 'V', '2', '4') /* 24 Y/CbCr 4:4:4 */
-#define V4L2_PIX_FMT_NV42 v4l2_fourcc('N', 'V', '4', '2') /* 24 Y/CrCb 4:4:4 */
-
-/* two non contiguous planes - one Y, one Cr + Cb interleaved */
-#define V4L2_PIX_FMT_NV12M v4l2_fourcc('N', 'M', '1', '2') /* 12 Y/CbCr 4:2:0 */
-#define V4L2_PIX_FMT_NV21M v4l2_fourcc('N', 'M', '2', '1') /* 21 Y/CrCb 4:2:0 */
-#define V4L2_PIX_FMT_NV12MT v4l2_fourcc('T', 'M', '1', '2') /* 12 Y/CbCr 4:2:0 64x32 macroblocks */
-#define V4L2_PIX_FMT_NV12MT_16X16 v4l2_fourcc('V', 'M', '1', '2') /* 12 Y/CbCr 4:2:0 16x16 macroblocks */
-
-/* three non contiguous planes - Y, Cb, Cr */
-#define V4L2_PIX_FMT_YUV420M v4l2_fourcc('Y', 'M', '1', '2') /* 12 YUV420 planar */
-#define V4L2_PIX_FMT_YVU420M v4l2_fourcc('Y', 'M', '2', '1') /* 12 YVU420 planar */
-
-/* Bayer formats - see http://www.siliconimaging.com/RGB%20Bayer.htm */
-#define V4L2_PIX_FMT_SBGGR8 v4l2_fourcc('B', 'A', '8', '1') /* 8 BGBG.. GRGR.. */
-#define V4L2_PIX_FMT_SGBRG8 v4l2_fourcc('G', 'B', 'R', 'G') /* 8 GBGB.. RGRG.. */
-#define V4L2_PIX_FMT_SGRBG8 v4l2_fourcc('G', 'R', 'B', 'G') /* 8 GRGR.. BGBG.. */
-#define V4L2_PIX_FMT_SRGGB8 v4l2_fourcc('R', 'G', 'G', 'B') /* 8 RGRG.. GBGB.. */
-#define V4L2_PIX_FMT_SBGGR10 v4l2_fourcc('B', 'G', '1', '0') /* 10 BGBG.. GRGR.. */
-#define V4L2_PIX_FMT_SGBRG10 v4l2_fourcc('G', 'B', '1', '0') /* 10 GBGB.. RGRG.. */
-#define V4L2_PIX_FMT_SGRBG10 v4l2_fourcc('B', 'A', '1', '0') /* 10 GRGR.. BGBG.. */
-#define V4L2_PIX_FMT_SRGGB10 v4l2_fourcc('R', 'G', '1', '0') /* 10 RGRG.. GBGB.. */
-#define V4L2_PIX_FMT_SBGGR12 v4l2_fourcc('B', 'G', '1', '2') /* 12 BGBG.. GRGR.. */
-#define V4L2_PIX_FMT_SGBRG12 v4l2_fourcc('G', 'B', '1', '2') /* 12 GBGB.. RGRG.. */
-#define V4L2_PIX_FMT_SGRBG12 v4l2_fourcc('B', 'A', '1', '2') /* 12 GRGR.. BGBG.. */
-#define V4L2_PIX_FMT_SRGGB12 v4l2_fourcc('R', 'G', '1', '2') /* 12 RGRG.. GBGB.. */
- /* 10bit raw bayer DPCM compressed to 8 bits */
-#define V4L2_PIX_FMT_SBGGR10DPCM8 v4l2_fourcc('b', 'B', 'A', '8')
-#define V4L2_PIX_FMT_SGBRG10DPCM8 v4l2_fourcc('b', 'G', 'A', '8')
-#define V4L2_PIX_FMT_SGRBG10DPCM8 v4l2_fourcc('B', 'D', '1', '0')
-#define V4L2_PIX_FMT_SRGGB10DPCM8 v4l2_fourcc('b', 'R', 'A', '8')
- /*
- * 10bit raw bayer, expanded to 16 bits
- * xxxxrrrrrrrrrrxxxxgggggggggg xxxxggggggggggxxxxbbbbbbbbbb...
- */
-#define V4L2_PIX_FMT_SBGGR16 v4l2_fourcc('B', 'Y', 'R', '2') /* 16 BGBG.. GRGR.. */
-
-/* compressed formats */
-#define V4L2_PIX_FMT_MJPEG v4l2_fourcc('M', 'J', 'P', 'G') /* Motion-JPEG */
-#define V4L2_PIX_FMT_JPEG v4l2_fourcc('J', 'P', 'E', 'G') /* JFIF JPEG */
-#define V4L2_PIX_FMT_DV v4l2_fourcc('d', 'v', 's', 'd') /* 1394 */
-#define V4L2_PIX_FMT_MPEG v4l2_fourcc('M', 'P', 'E', 'G') /* MPEG-1/2/4 Multiplexed */
-#define V4L2_PIX_FMT_H264 v4l2_fourcc('H', '2', '6', '4') /* H264 with start codes */
-#define V4L2_PIX_FMT_H264_NO_SC v4l2_fourcc('A', 'V', 'C', '1') /* H264 without start codes */
-#define V4L2_PIX_FMT_H264_MVC v4l2_fourcc('M', '2', '6', '4') /* H264 MVC */
-#define V4L2_PIX_FMT_H263 v4l2_fourcc('H', '2', '6', '3') /* H263 */
-#define V4L2_PIX_FMT_MPEG1 v4l2_fourcc('M', 'P', 'G', '1') /* MPEG-1 ES */
-#define V4L2_PIX_FMT_MPEG2 v4l2_fourcc('M', 'P', 'G', '2') /* MPEG-2 ES */
-#define V4L2_PIX_FMT_MPEG4 v4l2_fourcc('M', 'P', 'G', '4') /* MPEG-4 ES */
-#define V4L2_PIX_FMT_XVID v4l2_fourcc('X', 'V', 'I', 'D') /* Xvid */
-#define V4L2_PIX_FMT_VC1_ANNEX_G v4l2_fourcc('V', 'C', '1', 'G') /* SMPTE 421M Annex G compliant stream */
-#define V4L2_PIX_FMT_VC1_ANNEX_L v4l2_fourcc('V', 'C', '1', 'L') /* SMPTE 421M Annex L compliant stream */
-#define V4L2_PIX_FMT_VP8 v4l2_fourcc('V', 'P', '8', '0') /* VP8 */
-
-/* Vendor-specific formats */
-#define V4L2_PIX_FMT_CPIA1 v4l2_fourcc('C', 'P', 'I', 'A') /* cpia1 YUV */
-#define V4L2_PIX_FMT_WNVA v4l2_fourcc('W', 'N', 'V', 'A') /* Winnov hw compress */
-#define V4L2_PIX_FMT_SN9C10X v4l2_fourcc('S', '9', '1', '0') /* SN9C10x compression */
-#define V4L2_PIX_FMT_SN9C20X_I420 v4l2_fourcc('S', '9', '2', '0') /* SN9C20x YUV 4:2:0 */
-#define V4L2_PIX_FMT_PWC1 v4l2_fourcc('P', 'W', 'C', '1') /* pwc older webcam */
-#define V4L2_PIX_FMT_PWC2 v4l2_fourcc('P', 'W', 'C', '2') /* pwc newer webcam */
-#define V4L2_PIX_FMT_ET61X251 v4l2_fourcc('E', '6', '2', '5') /* ET61X251 compression */
-#define V4L2_PIX_FMT_SPCA501 v4l2_fourcc('S', '5', '0', '1') /* YUYV per line */
-#define V4L2_PIX_FMT_SPCA505 v4l2_fourcc('S', '5', '0', '5') /* YYUV per line */
-#define V4L2_PIX_FMT_SPCA508 v4l2_fourcc('S', '5', '0', '8') /* YUVY per line */
-#define V4L2_PIX_FMT_SPCA561 v4l2_fourcc('S', '5', '6', '1') /* compressed GBRG bayer */
-#define V4L2_PIX_FMT_PAC207 v4l2_fourcc('P', '2', '0', '7') /* compressed BGGR bayer */
-#define V4L2_PIX_FMT_MR97310A v4l2_fourcc('M', '3', '1', '0') /* compressed BGGR bayer */
-#define V4L2_PIX_FMT_JL2005BCD v4l2_fourcc('J', 'L', '2', '0') /* compressed RGGB bayer */
-#define V4L2_PIX_FMT_SN9C2028 v4l2_fourcc('S', 'O', 'N', 'X') /* compressed GBRG bayer */
-#define V4L2_PIX_FMT_SQ905C v4l2_fourcc('9', '0', '5', 'C') /* compressed RGGB bayer */
-#define V4L2_PIX_FMT_PJPG v4l2_fourcc('P', 'J', 'P', 'G') /* Pixart 73xx JPEG */
-#define V4L2_PIX_FMT_OV511 v4l2_fourcc('O', '5', '1', '1') /* ov511 JPEG */
-#define V4L2_PIX_FMT_OV518 v4l2_fourcc('O', '5', '1', '8') /* ov518 JPEG */
-#define V4L2_PIX_FMT_STV0680 v4l2_fourcc('S', '6', '8', '0') /* stv0680 bayer */
-#define V4L2_PIX_FMT_TM6000 v4l2_fourcc('T', 'M', '6', '0') /* tm5600/tm60x0 */
-#define V4L2_PIX_FMT_CIT_YYVYUY v4l2_fourcc('C', 'I', 'T', 'V') /* one line of Y then 1 line of VYUY */
-#define V4L2_PIX_FMT_KONICA420 v4l2_fourcc('K', 'O', 'N', 'I') /* YUV420 planar in blocks of 256 pixels */
-#define V4L2_PIX_FMT_JPGL v4l2_fourcc('J', 'P', 'G', 'L') /* JPEG-Lite */
-#define V4L2_PIX_FMT_SE401 v4l2_fourcc('S', '4', '0', '1') /* se401 janggu compressed rgb */
-#define V4L2_PIX_FMT_S5C_UYVY_JPG v4l2_fourcc('S', '5', 'C', 'I') /* S5C73M3 interleaved UYVY/JPEG */
-
-/*
- * F O R M A T E N U M E R A T I O N
- */
-struct v4l2_fmtdesc {
- __u32 index; /* Format number */
- __u32 type; /* enum v4l2_buf_type */
- __u32 flags;
- __u8 description[32]; /* Description string */
- __u32 pixelformat; /* Format fourcc */
- __u32 reserved[4];
-};
-
-#define V4L2_FMT_FLAG_COMPRESSED 0x0001
-#define V4L2_FMT_FLAG_EMULATED 0x0002
-
-#if 1
- /* Experimental Frame Size and frame rate enumeration */
-/*
- * F R A M E S I Z E E N U M E R A T I O N
- */
-enum v4l2_frmsizetypes {
- V4L2_FRMSIZE_TYPE_DISCRETE = 1,
- V4L2_FRMSIZE_TYPE_CONTINUOUS = 2,
- V4L2_FRMSIZE_TYPE_STEPWISE = 3,
-};
-
-struct v4l2_frmsize_discrete {
- __u32 width; /* Frame width [pixel] */
- __u32 height; /* Frame height [pixel] */
-};
-
-struct v4l2_frmsize_stepwise {
- __u32 min_width; /* Minimum frame width [pixel] */
- __u32 max_width; /* Maximum frame width [pixel] */
- __u32 step_width; /* Frame width step size [pixel] */
- __u32 min_height; /* Minimum frame height [pixel] */
- __u32 max_height; /* Maximum frame height [pixel] */
- __u32 step_height; /* Frame height step size [pixel] */
-};
-
-struct v4l2_frmsizeenum {
- __u32 index; /* Frame size number */
- __u32 pixel_format; /* Pixel format */
- __u32 type; /* Frame size type the device supports. */
-
- union { /* Frame size */
- struct v4l2_frmsize_discrete discrete;
- struct v4l2_frmsize_stepwise stepwise;
- };
-
- __u32 reserved[2]; /* Reserved space for future use */
-};
-
-/*
- * F R A M E R A T E E N U M E R A T I O N
- */
-enum v4l2_frmivaltypes {
- V4L2_FRMIVAL_TYPE_DISCRETE = 1,
- V4L2_FRMIVAL_TYPE_CONTINUOUS = 2,
- V4L2_FRMIVAL_TYPE_STEPWISE = 3,
-};
-
-struct v4l2_frmival_stepwise {
- struct v4l2_fract min; /* Minimum frame interval [s] */
- struct v4l2_fract max; /* Maximum frame interval [s] */
- struct v4l2_fract step; /* Frame interval step size [s] */
-};
-
-struct v4l2_frmivalenum {
- __u32 index; /* Frame format index */
- __u32 pixel_format; /* Pixel format */
- __u32 width; /* Frame width */
- __u32 height; /* Frame height */
- __u32 type; /* Frame interval type the device supports. */
-
- union { /* Frame interval */
- struct v4l2_fract discrete;
- struct v4l2_frmival_stepwise stepwise;
- };
-
- __u32 reserved[2]; /* Reserved space for future use */
-};
-#endif
-
-/*
- * T I M E C O D E
- */
-struct v4l2_timecode {
- __u32 type;
- __u32 flags;
- __u8 frames;
- __u8 seconds;
- __u8 minutes;
- __u8 hours;
- __u8 userbits[4];
-};
-
-/* Type */
-#define V4L2_TC_TYPE_24FPS 1
-#define V4L2_TC_TYPE_25FPS 2
-#define V4L2_TC_TYPE_30FPS 3
-#define V4L2_TC_TYPE_50FPS 4
-#define V4L2_TC_TYPE_60FPS 5
-
-/* Flags */
-#define V4L2_TC_FLAG_DROPFRAME 0x0001 /* "drop-frame" mode */
-#define V4L2_TC_FLAG_COLORFRAME 0x0002
-#define V4L2_TC_USERBITS_field 0x000C
-#define V4L2_TC_USERBITS_USERDEFINED 0x0000
-#define V4L2_TC_USERBITS_8BITCHARS 0x0008
-/* The above is based on SMPTE timecodes */
-
-struct v4l2_jpegcompression {
- int quality;
-
- int APPn; /* Number of APP segment to be written,
- * must be 0..15 */
- int APP_len; /* Length of data in JPEG APPn segment */
- char APP_data[60]; /* Data in the JPEG APPn segment. */
-
- int COM_len; /* Length of data in JPEG COM segment */
- char COM_data[60]; /* Data in JPEG COM segment */
-
- __u32 jpeg_markers; /* Which markers should go into the JPEG
- * output. Unless you exactly know what
- * you do, leave them untouched.
- * Inluding less markers will make the
- * resulting code smaller, but there will
- * be fewer applications which can read it.
- * The presence of the APP and COM marker
- * is influenced by APP_len and COM_len
- * ONLY, not by this property! */
-
-#define V4L2_JPEG_MARKER_DHT (1<<3) /* Define Huffman Tables */
-#define V4L2_JPEG_MARKER_DQT (1<<4) /* Define Quantization Tables */
-#define V4L2_JPEG_MARKER_DRI (1<<5) /* Define Restart Interval */
-#define V4L2_JPEG_MARKER_COM (1<<6) /* Comment segment */
-#define V4L2_JPEG_MARKER_APP (1<<7) /* App segment, driver will
- * allways use APP0 */
-};
-
-/*
- * M E M O R Y - M A P P I N G B U F F E R S
- */
-struct v4l2_requestbuffers {
- __u32 count;
- __u32 type; /* enum v4l2_buf_type */
- __u32 memory; /* enum v4l2_memory */
- __u32 reserved[2];
-};
-
-/**
- * struct v4l2_plane - plane info for multi-planar buffers
- * @bytesused: number of bytes occupied by data in the plane (payload)
- * @length: size of this plane (NOT the payload) in bytes
- * @mem_offset: when memory in the associated struct v4l2_buffer is
- * V4L2_MEMORY_MMAP, equals the offset from the start of
- * the device memory for this plane (or is a "cookie" that
- * should be passed to mmap() called on the video node)
- * @userptr: when memory is V4L2_MEMORY_USERPTR, a userspace pointer
- * pointing to this plane
- * @data_offset: offset in the plane to the start of data; usually 0,
- * unless there is a header in front of the data
- *
- * Multi-planar buffers consist of one or more planes, e.g. an YCbCr buffer
- * with two planes can have one plane for Y, and another for interleaved CbCr
- * components. Each plane can reside in a separate memory buffer, or even in
- * a completely separate memory node (e.g. in embedded devices).
- */
-struct v4l2_plane {
- __u32 bytesused;
- __u32 length;
- union {
- __u32 mem_offset;
- unsigned long userptr;
- } m;
- __u32 data_offset;
- __u32 reserved[11];
-};
-
-/**
- * struct v4l2_buffer - video buffer info
- * @index: id number of the buffer
- * @type: enum v4l2_buf_type; buffer type (type == *_MPLANE for
- * multiplanar buffers);
- * @bytesused: number of bytes occupied by data in the buffer (payload);
- * unused (set to 0) for multiplanar buffers
- * @flags: buffer informational flags
- * @field: enum v4l2_field; field order of the image in the buffer
- * @timestamp: frame timestamp
- * @timecode: frame timecode
- * @sequence: sequence count of this frame
- * @memory: enum v4l2_memory; the method, in which the actual video data is
- * passed
- * @offset: for non-multiplanar buffers with memory == V4L2_MEMORY_MMAP;
- * offset from the start of the device memory for this plane,
- * (or a "cookie" that should be passed to mmap() as offset)
- * @userptr: for non-multiplanar buffers with memory == V4L2_MEMORY_USERPTR;
- * a userspace pointer pointing to this buffer
- * @planes: for multiplanar buffers; userspace pointer to the array of plane
- * info structs for this buffer
- * @length: size in bytes of the buffer (NOT its payload) for single-plane
- * buffers (when type != *_MPLANE); number of elements in the
- * planes array for multi-plane buffers
- * @input: input number from which the video data has has been captured
- *
- * Contains data exchanged by application and driver using one of the Streaming
- * I/O methods.
- */
-struct v4l2_buffer {
- __u32 index;
- __u32 type;
- __u32 bytesused;
- __u32 flags;
- __u32 field;
- struct timeval timestamp;
- struct v4l2_timecode timecode;
- __u32 sequence;
-
- /* memory location */
- __u32 memory;
- union {
- __u32 offset;
- unsigned long userptr;
- struct v4l2_plane *planes;
- } m;
- __u32 length;
- __u32 reserved2;
- __u32 reserved;
-};
-
-/* Flags for 'flags' field */
-#define V4L2_BUF_FLAG_MAPPED 0x0001 /* Buffer is mapped (flag) */
-#define V4L2_BUF_FLAG_QUEUED 0x0002 /* Buffer is queued for processing */
-#define V4L2_BUF_FLAG_DONE 0x0004 /* Buffer is ready */
-#define V4L2_BUF_FLAG_KEYFRAME 0x0008 /* Image is a keyframe (I-frame) */
-#define V4L2_BUF_FLAG_PFRAME 0x0010 /* Image is a P-frame */
-#define V4L2_BUF_FLAG_BFRAME 0x0020 /* Image is a B-frame */
-/* Buffer is ready, but the data contained within is corrupted. */
-#define V4L2_BUF_FLAG_ERROR 0x0040
-#define V4L2_BUF_FLAG_TIMECODE 0x0100 /* timecode field is valid */
-#define V4L2_BUF_FLAG_PREPARED 0x0400 /* Buffer is prepared for queuing */
-/* Cache handling flags */
-#define V4L2_BUF_FLAG_NO_CACHE_INVALIDATE 0x0800
-#define V4L2_BUF_FLAG_NO_CACHE_CLEAN 0x1000
-
-/*
- * O V E R L A Y P R E V I E W
- */
-struct v4l2_framebuffer {
- __u32 capability;
- __u32 flags;
-/* FIXME: in theory we should pass something like PCI device + memory
- * region + offset instead of some physical address */
- void *base;
- struct v4l2_pix_format fmt;
-};
-/* Flags for the 'capability' field. Read only */
-#define V4L2_FBUF_CAP_EXTERNOVERLAY 0x0001
-#define V4L2_FBUF_CAP_CHROMAKEY 0x0002
-#define V4L2_FBUF_CAP_LIST_CLIPPING 0x0004
-#define V4L2_FBUF_CAP_BITMAP_CLIPPING 0x0008
-#define V4L2_FBUF_CAP_LOCAL_ALPHA 0x0010
-#define V4L2_FBUF_CAP_GLOBAL_ALPHA 0x0020
-#define V4L2_FBUF_CAP_LOCAL_INV_ALPHA 0x0040
-#define V4L2_FBUF_CAP_SRC_CHROMAKEY 0x0080
-/* Flags for the 'flags' field. */
-#define V4L2_FBUF_FLAG_PRIMARY 0x0001
-#define V4L2_FBUF_FLAG_OVERLAY 0x0002
-#define V4L2_FBUF_FLAG_CHROMAKEY 0x0004
-#define V4L2_FBUF_FLAG_LOCAL_ALPHA 0x0008
-#define V4L2_FBUF_FLAG_GLOBAL_ALPHA 0x0010
-#define V4L2_FBUF_FLAG_LOCAL_INV_ALPHA 0x0020
-#define V4L2_FBUF_FLAG_SRC_CHROMAKEY 0x0040
-
-struct v4l2_clip {
- struct v4l2_rect c;
- struct v4l2_clip __user *next;
-};
-
-struct v4l2_window {
- struct v4l2_rect w;
- __u32 field; /* enum v4l2_field */
- __u32 chromakey;
- struct v4l2_clip __user *clips;
- __u32 clipcount;
- void __user *bitmap;
- __u8 global_alpha;
-};
-
-/*
- * C A P T U R E P A R A M E T E R S
- */
-struct v4l2_captureparm {
- __u32 capability; /* Supported modes */
- __u32 capturemode; /* Current mode */
- struct v4l2_fract timeperframe; /* Time per frame in .1us units */
- __u32 extendedmode; /* Driver-specific extensions */
- __u32 readbuffers; /* # of buffers for read */
- __u32 reserved[4];
-};
-
-/* Flags for 'capability' and 'capturemode' fields */
-#define V4L2_MODE_HIGHQUALITY 0x0001 /* High quality imaging mode */
-#define V4L2_CAP_TIMEPERFRAME 0x1000 /* timeperframe field is supported */
-
-struct v4l2_outputparm {
- __u32 capability; /* Supported modes */
- __u32 outputmode; /* Current mode */
- struct v4l2_fract timeperframe; /* Time per frame in seconds */
- __u32 extendedmode; /* Driver-specific extensions */
- __u32 writebuffers; /* # of buffers for write */
- __u32 reserved[4];
-};
-
-/*
- * I N P U T I M A G E C R O P P I N G
- */
-struct v4l2_cropcap {
- __u32 type; /* enum v4l2_buf_type */
- struct v4l2_rect bounds;
- struct v4l2_rect defrect;
- struct v4l2_fract pixelaspect;
-};
-
-struct v4l2_crop {
- __u32 type; /* enum v4l2_buf_type */
- struct v4l2_rect c;
-};
-
-/**
- * struct v4l2_selection - selection info
- * @type: buffer type (do not use *_MPLANE types)
- * @target: Selection target, used to choose one of possible rectangles;
- * defined in v4l2-common.h; V4L2_SEL_TGT_* .
- * @flags: constraints flags, defined in v4l2-common.h; V4L2_SEL_FLAG_*.
- * @r: coordinates of selection window
- * @reserved: for future use, rounds structure size to 64 bytes, set to zero
- *
- * Hardware may use multiple helper windows to process a video stream.
- * The structure is used to exchange this selection areas between
- * an application and a driver.
- */
-struct v4l2_selection {
- __u32 type;
- __u32 target;
- __u32 flags;
- struct v4l2_rect r;
- __u32 reserved[9];
-};
-
-
-/*
- * A N A L O G V I D E O S T A N D A R D
- */
-
-typedef __u64 v4l2_std_id;
-
-/* one bit for each */
-#define V4L2_STD_PAL_B ((v4l2_std_id)0x00000001)
-#define V4L2_STD_PAL_B1 ((v4l2_std_id)0x00000002)
-#define V4L2_STD_PAL_G ((v4l2_std_id)0x00000004)
-#define V4L2_STD_PAL_H ((v4l2_std_id)0x00000008)
-#define V4L2_STD_PAL_I ((v4l2_std_id)0x00000010)
-#define V4L2_STD_PAL_D ((v4l2_std_id)0x00000020)
-#define V4L2_STD_PAL_D1 ((v4l2_std_id)0x00000040)
-#define V4L2_STD_PAL_K ((v4l2_std_id)0x00000080)
-
-#define V4L2_STD_PAL_M ((v4l2_std_id)0x00000100)
-#define V4L2_STD_PAL_N ((v4l2_std_id)0x00000200)
-#define V4L2_STD_PAL_Nc ((v4l2_std_id)0x00000400)
-#define V4L2_STD_PAL_60 ((v4l2_std_id)0x00000800)
-
-#define V4L2_STD_NTSC_M ((v4l2_std_id)0x00001000) /* BTSC */
-#define V4L2_STD_NTSC_M_JP ((v4l2_std_id)0x00002000) /* EIA-J */
-#define V4L2_STD_NTSC_443 ((v4l2_std_id)0x00004000)
-#define V4L2_STD_NTSC_M_KR ((v4l2_std_id)0x00008000) /* FM A2 */
-
-#define V4L2_STD_SECAM_B ((v4l2_std_id)0x00010000)
-#define V4L2_STD_SECAM_D ((v4l2_std_id)0x00020000)
-#define V4L2_STD_SECAM_G ((v4l2_std_id)0x00040000)
-#define V4L2_STD_SECAM_H ((v4l2_std_id)0x00080000)
-#define V4L2_STD_SECAM_K ((v4l2_std_id)0x00100000)
-#define V4L2_STD_SECAM_K1 ((v4l2_std_id)0x00200000)
-#define V4L2_STD_SECAM_L ((v4l2_std_id)0x00400000)
-#define V4L2_STD_SECAM_LC ((v4l2_std_id)0x00800000)
-
-/* ATSC/HDTV */
-#define V4L2_STD_ATSC_8_VSB ((v4l2_std_id)0x01000000)
-#define V4L2_STD_ATSC_16_VSB ((v4l2_std_id)0x02000000)
-
-/* FIXME:
- Although std_id is 64 bits, there is an issue on PPC32 architecture that
- makes switch(__u64) to break. So, there's a hack on v4l2-common.c rounding
- this value to 32 bits.
- As, currently, the max value is for V4L2_STD_ATSC_16_VSB (30 bits wide),
- it should work fine. However, if needed to add more than two standards,
- v4l2-common.c should be fixed.
- */
-
-/*
- * Some macros to merge video standards in order to make live easier for the
- * drivers and V4L2 applications
- */
-
-/*
- * "Common" NTSC/M - It should be noticed that V4L2_STD_NTSC_443 is
- * Missing here.
- */
-#define V4L2_STD_NTSC (V4L2_STD_NTSC_M |\
- V4L2_STD_NTSC_M_JP |\
- V4L2_STD_NTSC_M_KR)
-/* Secam macros */
-#define V4L2_STD_SECAM_DK (V4L2_STD_SECAM_D |\
- V4L2_STD_SECAM_K |\
- V4L2_STD_SECAM_K1)
-/* All Secam Standards */
-#define V4L2_STD_SECAM (V4L2_STD_SECAM_B |\
- V4L2_STD_SECAM_G |\
- V4L2_STD_SECAM_H |\
- V4L2_STD_SECAM_DK |\
- V4L2_STD_SECAM_L |\
- V4L2_STD_SECAM_LC)
-/* PAL macros */
-#define V4L2_STD_PAL_BG (V4L2_STD_PAL_B |\
- V4L2_STD_PAL_B1 |\
- V4L2_STD_PAL_G)
-#define V4L2_STD_PAL_DK (V4L2_STD_PAL_D |\
- V4L2_STD_PAL_D1 |\
- V4L2_STD_PAL_K)
-/*
- * "Common" PAL - This macro is there to be compatible with the old
- * V4L1 concept of "PAL": /BGDKHI.
- * Several PAL standards are mising here: /M, /N and /Nc
- */
-#define V4L2_STD_PAL (V4L2_STD_PAL_BG |\
- V4L2_STD_PAL_DK |\
- V4L2_STD_PAL_H |\
- V4L2_STD_PAL_I)
-/* Chroma "agnostic" standards */
-#define V4L2_STD_B (V4L2_STD_PAL_B |\
- V4L2_STD_PAL_B1 |\
- V4L2_STD_SECAM_B)
-#define V4L2_STD_G (V4L2_STD_PAL_G |\
- V4L2_STD_SECAM_G)
-#define V4L2_STD_H (V4L2_STD_PAL_H |\
- V4L2_STD_SECAM_H)
-#define V4L2_STD_L (V4L2_STD_SECAM_L |\
- V4L2_STD_SECAM_LC)
-#define V4L2_STD_GH (V4L2_STD_G |\
- V4L2_STD_H)
-#define V4L2_STD_DK (V4L2_STD_PAL_DK |\
- V4L2_STD_SECAM_DK)
-#define V4L2_STD_BG (V4L2_STD_B |\
- V4L2_STD_G)
-#define V4L2_STD_MN (V4L2_STD_PAL_M |\
- V4L2_STD_PAL_N |\
- V4L2_STD_PAL_Nc |\
- V4L2_STD_NTSC)
-
-/* Standards where MTS/BTSC stereo could be found */
-#define V4L2_STD_MTS (V4L2_STD_NTSC_M |\
- V4L2_STD_PAL_M |\
- V4L2_STD_PAL_N |\
- V4L2_STD_PAL_Nc)
-
-/* Standards for Countries with 60Hz Line frequency */
-#define V4L2_STD_525_60 (V4L2_STD_PAL_M |\
- V4L2_STD_PAL_60 |\
- V4L2_STD_NTSC |\
- V4L2_STD_NTSC_443)
-/* Standards for Countries with 50Hz Line frequency */
-#define V4L2_STD_625_50 (V4L2_STD_PAL |\
- V4L2_STD_PAL_N |\
- V4L2_STD_PAL_Nc |\
- V4L2_STD_SECAM)
-
-#define V4L2_STD_ATSC (V4L2_STD_ATSC_8_VSB |\
- V4L2_STD_ATSC_16_VSB)
-/* Macros with none and all analog standards */
-#define V4L2_STD_UNKNOWN 0
-#define V4L2_STD_ALL (V4L2_STD_525_60 |\
- V4L2_STD_625_50)
-
-struct v4l2_standard {
- __u32 index;
- v4l2_std_id id;
- __u8 name[24];
- struct v4l2_fract frameperiod; /* Frames, not fields */
- __u32 framelines;
- __u32 reserved[4];
-};
-
-/* The DV Preset API is deprecated in favor of the DV Timings API.
- New drivers shouldn't use this anymore! */
-
-/*
- * V I D E O T I M I N G S D V P R E S E T
- */
-struct v4l2_dv_preset {
- __u32 preset;
- __u32 reserved[4];
-};
-
-/*
- * D V P R E S E T S E N U M E R A T I O N
- */
-struct v4l2_dv_enum_preset {
- __u32 index;
- __u32 preset;
- __u8 name[32]; /* Name of the preset timing */
- __u32 width;
- __u32 height;
- __u32 reserved[4];
-};
-
-/*
- * D V P R E S E T V A L U E S
- */
-#define V4L2_DV_INVALID 0
-#define V4L2_DV_480P59_94 1 /* BT.1362 */
-#define V4L2_DV_576P50 2 /* BT.1362 */
-#define V4L2_DV_720P24 3 /* SMPTE 296M */
-#define V4L2_DV_720P25 4 /* SMPTE 296M */
-#define V4L2_DV_720P30 5 /* SMPTE 296M */
-#define V4L2_DV_720P50 6 /* SMPTE 296M */
-#define V4L2_DV_720P59_94 7 /* SMPTE 274M */
-#define V4L2_DV_720P60 8 /* SMPTE 274M/296M */
-#define V4L2_DV_1080I29_97 9 /* BT.1120/ SMPTE 274M */
-#define V4L2_DV_1080I30 10 /* BT.1120/ SMPTE 274M */
-#define V4L2_DV_1080I25 11 /* BT.1120 */
-#define V4L2_DV_1080I50 12 /* SMPTE 296M */
-#define V4L2_DV_1080I60 13 /* SMPTE 296M */
-#define V4L2_DV_1080P24 14 /* SMPTE 296M */
-#define V4L2_DV_1080P25 15 /* SMPTE 296M */
-#define V4L2_DV_1080P30 16 /* SMPTE 296M */
-#define V4L2_DV_1080P50 17 /* BT.1120 */
-#define V4L2_DV_1080P60 18 /* BT.1120 */
-
-/*
- * D V B T T I M I N G S
- */
-
-/** struct v4l2_bt_timings - BT.656/BT.1120 timing data
- * @width: total width of the active video in pixels
- * @height: total height of the active video in lines
- * @interlaced: Interlaced or progressive
- * @polarities: Positive or negative polarities
- * @pixelclock: Pixel clock in HZ. Ex. 74.25MHz->74250000
- * @hfrontporch:Horizontal front porch in pixels
- * @hsync: Horizontal Sync length in pixels
- * @hbackporch: Horizontal back porch in pixels
- * @vfrontporch:Vertical front porch in lines
- * @vsync: Vertical Sync length in lines
- * @vbackporch: Vertical back porch in lines
- * @il_vfrontporch:Vertical front porch for the even field
- * (aka field 2) of interlaced field formats
- * @il_vsync: Vertical Sync length for the even field
- * (aka field 2) of interlaced field formats
- * @il_vbackporch:Vertical back porch for the even field
- * (aka field 2) of interlaced field formats
- * @standards: Standards the timing belongs to
- * @flags: Flags
- * @reserved: Reserved fields, must be zeroed.
- *
- * A note regarding vertical interlaced timings: height refers to the total
- * height of the active video frame (= two fields). The blanking timings refer
- * to the blanking of each field. So the height of the total frame is
- * calculated as follows:
- *
- * tot_height = height + vfrontporch + vsync + vbackporch +
- * il_vfrontporch + il_vsync + il_vbackporch
- *
- * The active height of each field is height / 2.
- */
-struct v4l2_bt_timings {
- __u32 width;
- __u32 height;
- __u32 interlaced;
- __u32 polarities;
- __u64 pixelclock;
- __u32 hfrontporch;
- __u32 hsync;
- __u32 hbackporch;
- __u32 vfrontporch;
- __u32 vsync;
- __u32 vbackporch;
- __u32 il_vfrontporch;
- __u32 il_vsync;
- __u32 il_vbackporch;
- __u32 standards;
- __u32 flags;
- __u32 reserved[14];
-} __attribute__ ((packed));
-
-/* Interlaced or progressive format */
-#define V4L2_DV_PROGRESSIVE 0
-#define V4L2_DV_INTERLACED 1
-
-/* Polarities. If bit is not set, it is assumed to be negative polarity */
-#define V4L2_DV_VSYNC_POS_POL 0x00000001
-#define V4L2_DV_HSYNC_POS_POL 0x00000002
-
-/* Timings standards */
-#define V4L2_DV_BT_STD_CEA861 (1 << 0) /* CEA-861 Digital TV Profile */
-#define V4L2_DV_BT_STD_DMT (1 << 1) /* VESA Discrete Monitor Timings */
-#define V4L2_DV_BT_STD_CVT (1 << 2) /* VESA Coordinated Video Timings */
-#define V4L2_DV_BT_STD_GTF (1 << 3) /* VESA Generalized Timings Formula */
-
-/* Flags */
-
-/* CVT/GTF specific: timing uses reduced blanking (CVT) or the 'Secondary
- GTF' curve (GTF). In both cases the horizontal and/or vertical blanking
- intervals are reduced, allowing a higher resolution over the same
- bandwidth. This is a read-only flag. */
-#define V4L2_DV_FL_REDUCED_BLANKING (1 << 0)
-/* CEA-861 specific: set for CEA-861 formats with a framerate of a multiple
- of six. These formats can be optionally played at 1 / 1.001 speed.
- This is a read-only flag. */
-#define V4L2_DV_FL_CAN_REDUCE_FPS (1 << 1)
-/* CEA-861 specific: only valid for video transmitters, the flag is cleared
- by receivers.
- If the framerate of the format is a multiple of six, then the pixelclock
- used to set up the transmitter is divided by 1.001 to make it compatible
- with 60 Hz based standards such as NTSC and PAL-M that use a framerate of
- 29.97 Hz. Otherwise this flag is cleared. If the transmitter can't generate
- such frequencies, then the flag will also be cleared. */
-#define V4L2_DV_FL_REDUCED_FPS (1 << 2)
-/* Specific to interlaced formats: if set, then field 1 is really one half-line
- longer and field 2 is really one half-line shorter, so each field has
- exactly the same number of half-lines. Whether half-lines can be detected
- or used depends on the hardware. */
-#define V4L2_DV_FL_HALF_LINE (1 << 0)
-
-
-/** struct v4l2_dv_timings - DV timings
- * @type: the type of the timings
- * @bt: BT656/1120 timings
- */
-struct v4l2_dv_timings {
- __u32 type;
- union {
- struct v4l2_bt_timings bt;
- __u32 reserved[32];
- };
-} __attribute__ ((packed));
-
-/* Values for the type field */
-#define V4L2_DV_BT_656_1120 0 /* BT.656/1120 timing type */
-
-
-/** struct v4l2_enum_dv_timings - DV timings enumeration
- * @index: enumeration index
- * @reserved: must be zeroed
- * @timings: the timings for the given index
- */
-struct v4l2_enum_dv_timings {
- __u32 index;
- __u32 reserved[3];
- struct v4l2_dv_timings timings;
-};
-
-/** struct v4l2_bt_timings_cap - BT.656/BT.1120 timing capabilities
- * @min_width: width in pixels
- * @max_width: width in pixels
- * @min_height: height in lines
- * @max_height: height in lines
- * @min_pixelclock: Pixel clock in HZ. Ex. 74.25MHz->74250000
- * @max_pixelclock: Pixel clock in HZ. Ex. 74.25MHz->74250000
- * @standards: Supported standards
- * @capabilities: Supported capabilities
- * @reserved: Must be zeroed
- */
-struct v4l2_bt_timings_cap {
- __u32 min_width;
- __u32 max_width;
- __u32 min_height;
- __u32 max_height;
- __u64 min_pixelclock;
- __u64 max_pixelclock;
- __u32 standards;
- __u32 capabilities;
- __u32 reserved[16];
-} __attribute__ ((packed));
-
-/* Supports interlaced formats */
-#define V4L2_DV_BT_CAP_INTERLACED (1 << 0)
-/* Supports progressive formats */
-#define V4L2_DV_BT_CAP_PROGRESSIVE (1 << 1)
-/* Supports CVT/GTF reduced blanking */
-#define V4L2_DV_BT_CAP_REDUCED_BLANKING (1 << 2)
-/* Supports custom formats */
-#define V4L2_DV_BT_CAP_CUSTOM (1 << 3)
-
-/** struct v4l2_dv_timings_cap - DV timings capabilities
- * @type: the type of the timings (same as in struct v4l2_dv_timings)
- * @bt: the BT656/1120 timings capabilities
- */
-struct v4l2_dv_timings_cap {
- __u32 type;
- __u32 reserved[3];
- union {
- struct v4l2_bt_timings_cap bt;
- __u32 raw_data[32];
- };
-};
-
-
-/*
- * V I D E O I N P U T S
- */
-struct v4l2_input {
- __u32 index; /* Which input */
- __u8 name[32]; /* Label */
- __u32 type; /* Type of input */
- __u32 audioset; /* Associated audios (bitfield) */
- __u32 tuner; /* enum v4l2_tuner_type */
- v4l2_std_id std;
- __u32 status;
- __u32 capabilities;
- __u32 reserved[3];
-};
-
-/* Values for the 'type' field */
-#define V4L2_INPUT_TYPE_TUNER 1
-#define V4L2_INPUT_TYPE_CAMERA 2
-
-/* field 'status' - general */
-#define V4L2_IN_ST_NO_POWER 0x00000001 /* Attached device is off */
-#define V4L2_IN_ST_NO_SIGNAL 0x00000002
-#define V4L2_IN_ST_NO_COLOR 0x00000004
-
-/* field 'status' - sensor orientation */
-/* If sensor is mounted upside down set both bits */
-#define V4L2_IN_ST_HFLIP 0x00000010 /* Frames are flipped horizontally */
-#define V4L2_IN_ST_VFLIP 0x00000020 /* Frames are flipped vertically */
-
-/* field 'status' - analog */
-#define V4L2_IN_ST_NO_H_LOCK 0x00000100 /* No horizontal sync lock */
-#define V4L2_IN_ST_COLOR_KILL 0x00000200 /* Color killer is active */
-
-/* field 'status' - digital */
-#define V4L2_IN_ST_NO_SYNC 0x00010000 /* No synchronization lock */
-#define V4L2_IN_ST_NO_EQU 0x00020000 /* No equalizer lock */
-#define V4L2_IN_ST_NO_CARRIER 0x00040000 /* Carrier recovery failed */
-
-/* field 'status' - VCR and set-top box */
-#define V4L2_IN_ST_MACROVISION 0x01000000 /* Macrovision detected */
-#define V4L2_IN_ST_NO_ACCESS 0x02000000 /* Conditional access denied */
-#define V4L2_IN_ST_VTR 0x04000000 /* VTR time constant */
-
-/* capabilities flags */
-#define V4L2_IN_CAP_PRESETS 0x00000001 /* Supports S_DV_PRESET */
-#define V4L2_IN_CAP_DV_TIMINGS 0x00000002 /* Supports S_DV_TIMINGS */
-#define V4L2_IN_CAP_CUSTOM_TIMINGS V4L2_IN_CAP_DV_TIMINGS /* For compatibility */
-#define V4L2_IN_CAP_STD 0x00000004 /* Supports S_STD */
-
-/*
- * V I D E O O U T P U T S
- */
-struct v4l2_output {
- __u32 index; /* Which output */
- __u8 name[32]; /* Label */
- __u32 type; /* Type of output */
- __u32 audioset; /* Associated audios (bitfield) */
- __u32 modulator; /* Associated modulator */
- v4l2_std_id std;
- __u32 capabilities;
- __u32 reserved[3];
-};
-/* Values for the 'type' field */
-#define V4L2_OUTPUT_TYPE_MODULATOR 1
-#define V4L2_OUTPUT_TYPE_ANALOG 2
-#define V4L2_OUTPUT_TYPE_ANALOGVGAOVERLAY 3
-
-/* capabilities flags */
-#define V4L2_OUT_CAP_PRESETS 0x00000001 /* Supports S_DV_PRESET */
-#define V4L2_OUT_CAP_DV_TIMINGS 0x00000002 /* Supports S_DV_TIMINGS */
-#define V4L2_OUT_CAP_CUSTOM_TIMINGS V4L2_OUT_CAP_DV_TIMINGS /* For compatibility */
-#define V4L2_OUT_CAP_STD 0x00000004 /* Supports S_STD */
-
-/*
- * C O N T R O L S
- */
-struct v4l2_control {
- __u32 id;
- __s32 value;
-};
-
-struct v4l2_ext_control {
- __u32 id;
- __u32 size;
- __u32 reserved2[1];
- union {
- __s32 value;
- __s64 value64;
- char *string;
- };
-} __attribute__ ((packed));
-
-struct v4l2_ext_controls {
- __u32 ctrl_class;
- __u32 count;
- __u32 error_idx;
- __u32 reserved[2];
- struct v4l2_ext_control *controls;
-};
-
-#define V4L2_CTRL_ID_MASK (0x0fffffff)
-#define V4L2_CTRL_ID2CLASS(id) ((id) & 0x0fff0000UL)
-#define V4L2_CTRL_DRIVER_PRIV(id) (((id) & 0xffff) >= 0x1000)
-
-enum v4l2_ctrl_type {
- V4L2_CTRL_TYPE_INTEGER = 1,
- V4L2_CTRL_TYPE_BOOLEAN = 2,
- V4L2_CTRL_TYPE_MENU = 3,
- V4L2_CTRL_TYPE_BUTTON = 4,
- V4L2_CTRL_TYPE_INTEGER64 = 5,
- V4L2_CTRL_TYPE_CTRL_CLASS = 6,
- V4L2_CTRL_TYPE_STRING = 7,
- V4L2_CTRL_TYPE_BITMASK = 8,
- V4L2_CTRL_TYPE_INTEGER_MENU = 9,
-};
-
-/* Used in the VIDIOC_QUERYCTRL ioctl for querying controls */
-struct v4l2_queryctrl {
- __u32 id;
- __u32 type; /* enum v4l2_ctrl_type */
- __u8 name[32]; /* Whatever */
- __s32 minimum; /* Note signedness */
- __s32 maximum;
- __s32 step;
- __s32 default_value;
- __u32 flags;
- __u32 reserved[2];
-};
-
-/* Used in the VIDIOC_QUERYMENU ioctl for querying menu items */
-struct v4l2_querymenu {
- __u32 id;
- __u32 index;
- union {
- __u8 name[32]; /* Whatever */
- __s64 value;
- };
- __u32 reserved;
-} __attribute__ ((packed));
-
-/* Control flags */
-#define V4L2_CTRL_FLAG_DISABLED 0x0001
-#define V4L2_CTRL_FLAG_GRABBED 0x0002
-#define V4L2_CTRL_FLAG_READ_ONLY 0x0004
-#define V4L2_CTRL_FLAG_UPDATE 0x0008
-#define V4L2_CTRL_FLAG_INACTIVE 0x0010
-#define V4L2_CTRL_FLAG_SLIDER 0x0020
-#define V4L2_CTRL_FLAG_WRITE_ONLY 0x0040
-#define V4L2_CTRL_FLAG_VOLATILE 0x0080
-
-/* Query flag, to be ORed with the control ID */
-#define V4L2_CTRL_FLAG_NEXT_CTRL 0x80000000
-
-/* User-class control IDs defined by V4L2 */
-#define V4L2_CID_MAX_CTRLS 1024
-/* IDs reserved for driver specific controls */
-#define V4L2_CID_PRIVATE_BASE 0x08000000
-
-
-/* DV-class control IDs defined by V4L2 */
-#define V4L2_CID_DV_CLASS_BASE (V4L2_CTRL_CLASS_DV | 0x900)
-#define V4L2_CID_DV_CLASS (V4L2_CTRL_CLASS_DV | 1)
-
-#define V4L2_CID_DV_TX_HOTPLUG (V4L2_CID_DV_CLASS_BASE + 1)
-#define V4L2_CID_DV_TX_RXSENSE (V4L2_CID_DV_CLASS_BASE + 2)
-#define V4L2_CID_DV_TX_EDID_PRESENT (V4L2_CID_DV_CLASS_BASE + 3)
-#define V4L2_CID_DV_TX_MODE (V4L2_CID_DV_CLASS_BASE + 4)
-enum v4l2_dv_tx_mode {
- V4L2_DV_TX_MODE_DVI_D = 0,
- V4L2_DV_TX_MODE_HDMI = 1,
-};
-#define V4L2_CID_DV_TX_RGB_RANGE (V4L2_CID_DV_CLASS_BASE + 5)
-enum v4l2_dv_rgb_range {
- V4L2_DV_RGB_RANGE_AUTO = 0,
- V4L2_DV_RGB_RANGE_LIMITED = 1,
- V4L2_DV_RGB_RANGE_FULL = 2,
-};
-
-#define V4L2_CID_DV_RX_POWER_PRESENT (V4L2_CID_DV_CLASS_BASE + 100)
-#define V4L2_CID_DV_RX_RGB_RANGE (V4L2_CID_DV_CLASS_BASE + 101)
-
-/*
- * T U N I N G
- */
-struct v4l2_tuner {
- __u32 index;
- __u8 name[32];
- __u32 type; /* enum v4l2_tuner_type */
- __u32 capability;
- __u32 rangelow;
- __u32 rangehigh;
- __u32 rxsubchans;
- __u32 audmode;
- __s32 signal;
- __s32 afc;
- __u32 reserved[4];
-};
-
-struct v4l2_modulator {
- __u32 index;
- __u8 name[32];
- __u32 capability;
- __u32 rangelow;
- __u32 rangehigh;
- __u32 txsubchans;
- __u32 reserved[4];
-};
-
-/* Flags for the 'capability' field */
-#define V4L2_TUNER_CAP_LOW 0x0001
-#define V4L2_TUNER_CAP_NORM 0x0002
-#define V4L2_TUNER_CAP_HWSEEK_BOUNDED 0x0004
-#define V4L2_TUNER_CAP_HWSEEK_WRAP 0x0008
-#define V4L2_TUNER_CAP_STEREO 0x0010
-#define V4L2_TUNER_CAP_LANG2 0x0020
-#define V4L2_TUNER_CAP_SAP 0x0020
-#define V4L2_TUNER_CAP_LANG1 0x0040
-#define V4L2_TUNER_CAP_RDS 0x0080
-#define V4L2_TUNER_CAP_RDS_BLOCK_IO 0x0100
-#define V4L2_TUNER_CAP_RDS_CONTROLS 0x0200
-#define V4L2_TUNER_CAP_FREQ_BANDS 0x0400
-#define V4L2_TUNER_CAP_HWSEEK_PROG_LIM 0x0800
-
-/* Flags for the 'rxsubchans' field */
-#define V4L2_TUNER_SUB_MONO 0x0001
-#define V4L2_TUNER_SUB_STEREO 0x0002
-#define V4L2_TUNER_SUB_LANG2 0x0004
-#define V4L2_TUNER_SUB_SAP 0x0004
-#define V4L2_TUNER_SUB_LANG1 0x0008
-#define V4L2_TUNER_SUB_RDS 0x0010
-
-/* Values for the 'audmode' field */
-#define V4L2_TUNER_MODE_MONO 0x0000
-#define V4L2_TUNER_MODE_STEREO 0x0001
-#define V4L2_TUNER_MODE_LANG2 0x0002
-#define V4L2_TUNER_MODE_SAP 0x0002
-#define V4L2_TUNER_MODE_LANG1 0x0003
-#define V4L2_TUNER_MODE_LANG1_LANG2 0x0004
-
-struct v4l2_frequency {
- __u32 tuner;
- __u32 type; /* enum v4l2_tuner_type */
- __u32 frequency;
- __u32 reserved[8];
-};
-
-#define V4L2_BAND_MODULATION_VSB (1 << 1)
-#define V4L2_BAND_MODULATION_FM (1 << 2)
-#define V4L2_BAND_MODULATION_AM (1 << 3)
-
-struct v4l2_frequency_band {
- __u32 tuner;
- __u32 type; /* enum v4l2_tuner_type */
- __u32 index;
- __u32 capability;
- __u32 rangelow;
- __u32 rangehigh;
- __u32 modulation;
- __u32 reserved[9];
-};
-
-struct v4l2_hw_freq_seek {
- __u32 tuner;
- __u32 type; /* enum v4l2_tuner_type */
- __u32 seek_upward;
- __u32 wrap_around;
- __u32 spacing;
- __u32 rangelow;
- __u32 rangehigh;
- __u32 reserved[5];
-};
-
-/*
- * R D S
- */
-
-struct v4l2_rds_data {
- __u8 lsb;
- __u8 msb;
- __u8 block;
-} __attribute__ ((packed));
-
-#define V4L2_RDS_BLOCK_MSK 0x7
-#define V4L2_RDS_BLOCK_A 0
-#define V4L2_RDS_BLOCK_B 1
-#define V4L2_RDS_BLOCK_C 2
-#define V4L2_RDS_BLOCK_D 3
-#define V4L2_RDS_BLOCK_C_ALT 4
-#define V4L2_RDS_BLOCK_INVALID 7
-
-#define V4L2_RDS_BLOCK_CORRECTED 0x40
-#define V4L2_RDS_BLOCK_ERROR 0x80
-
-/*
- * A U D I O
- */
-struct v4l2_audio {
- __u32 index;
- __u8 name[32];
- __u32 capability;
- __u32 mode;
- __u32 reserved[2];
-};
-
-/* Flags for the 'capability' field */
-#define V4L2_AUDCAP_STEREO 0x00001
-#define V4L2_AUDCAP_AVL 0x00002
-
-/* Flags for the 'mode' field */
-#define V4L2_AUDMODE_AVL 0x00001
-
-struct v4l2_audioout {
- __u32 index;
- __u8 name[32];
- __u32 capability;
- __u32 mode;
- __u32 reserved[2];
-};
-
-/*
- * M P E G S E R V I C E S
- *
- * NOTE: EXPERIMENTAL API
- */
-#if 1
-#define V4L2_ENC_IDX_FRAME_I (0)
-#define V4L2_ENC_IDX_FRAME_P (1)
-#define V4L2_ENC_IDX_FRAME_B (2)
-#define V4L2_ENC_IDX_FRAME_MASK (0xf)
-
-struct v4l2_enc_idx_entry {
- __u64 offset;
- __u64 pts;
- __u32 length;
- __u32 flags;
- __u32 reserved[2];
-};
-
-#define V4L2_ENC_IDX_ENTRIES (64)
-struct v4l2_enc_idx {
- __u32 entries;
- __u32 entries_cap;
- __u32 reserved[4];
- struct v4l2_enc_idx_entry entry[V4L2_ENC_IDX_ENTRIES];
-};
-
-
-#define V4L2_ENC_CMD_START (0)
-#define V4L2_ENC_CMD_STOP (1)
-#define V4L2_ENC_CMD_PAUSE (2)
-#define V4L2_ENC_CMD_RESUME (3)
-
-/* Flags for V4L2_ENC_CMD_STOP */
-#define V4L2_ENC_CMD_STOP_AT_GOP_END (1 << 0)
-
-struct v4l2_encoder_cmd {
- __u32 cmd;
- __u32 flags;
- union {
- struct {
- __u32 data[8];
- } raw;
- };
-};
-
-/* Decoder commands */
-#define V4L2_DEC_CMD_START (0)
-#define V4L2_DEC_CMD_STOP (1)
-#define V4L2_DEC_CMD_PAUSE (2)
-#define V4L2_DEC_CMD_RESUME (3)
-
-/* Flags for V4L2_DEC_CMD_START */
-#define V4L2_DEC_CMD_START_MUTE_AUDIO (1 << 0)
-
-/* Flags for V4L2_DEC_CMD_PAUSE */
-#define V4L2_DEC_CMD_PAUSE_TO_BLACK (1 << 0)
-
-/* Flags for V4L2_DEC_CMD_STOP */
-#define V4L2_DEC_CMD_STOP_TO_BLACK (1 << 0)
-#define V4L2_DEC_CMD_STOP_IMMEDIATELY (1 << 1)
-
-/* Play format requirements (returned by the driver): */
-
-/* The decoder has no special format requirements */
-#define V4L2_DEC_START_FMT_NONE (0)
-/* The decoder requires full GOPs */
-#define V4L2_DEC_START_FMT_GOP (1)
-
-/* The structure must be zeroed before use by the application
- This ensures it can be extended safely in the future. */
-struct v4l2_decoder_cmd {
- __u32 cmd;
- __u32 flags;
- union {
- struct {
- __u64 pts;
- } stop;
-
- struct {
- /* 0 or 1000 specifies normal speed,
- 1 specifies forward single stepping,
- -1 specifies backward single stepping,
- >1: playback at speed/1000 of the normal speed,
- <-1: reverse playback at (-speed/1000) of the normal speed. */
- __s32 speed;
- __u32 format;
- } start;
-
- struct {
- __u32 data[16];
- } raw;
- };
-};
-#endif
-
-
-/*
- * D A T A S E R V I C E S ( V B I )
- *
- * Data services API by Michael Schimek
- */
-
-/* Raw VBI */
-struct v4l2_vbi_format {
- __u32 sampling_rate; /* in 1 Hz */
- __u32 offset;
- __u32 samples_per_line;
- __u32 sample_format; /* V4L2_PIX_FMT_* */
- __s32 start[2];
- __u32 count[2];
- __u32 flags; /* V4L2_VBI_* */
- __u32 reserved[2]; /* must be zero */
-};
-
-/* VBI flags */
-#define V4L2_VBI_UNSYNC (1 << 0)
-#define V4L2_VBI_INTERLACED (1 << 1)
-
-/* Sliced VBI
- *
- * This implements is a proposal V4L2 API to allow SLICED VBI
- * required for some hardware encoders. It should change without
- * notice in the definitive implementation.
- */
-
-struct v4l2_sliced_vbi_format {
- __u16 service_set;
- /* service_lines[0][...] specifies lines 0-23 (1-23 used) of the first field
- service_lines[1][...] specifies lines 0-23 (1-23 used) of the second field
- (equals frame lines 313-336 for 625 line video
- standards, 263-286 for 525 line standards) */
- __u16 service_lines[2][24];
- __u32 io_size;
- __u32 reserved[2]; /* must be zero */
-};
-
-/* Teletext World System Teletext
- (WST), defined on ITU-R BT.653-2 */
-#define V4L2_SLICED_TELETEXT_B (0x0001)
-/* Video Program System, defined on ETS 300 231*/
-#define V4L2_SLICED_VPS (0x0400)
-/* Closed Caption, defined on EIA-608 */
-#define V4L2_SLICED_CAPTION_525 (0x1000)
-/* Wide Screen System, defined on ITU-R BT1119.1 */
-#define V4L2_SLICED_WSS_625 (0x4000)
-
-#define V4L2_SLICED_VBI_525 (V4L2_SLICED_CAPTION_525)
-#define V4L2_SLICED_VBI_625 (V4L2_SLICED_TELETEXT_B | V4L2_SLICED_VPS | V4L2_SLICED_WSS_625)
-
-struct v4l2_sliced_vbi_cap {
- __u16 service_set;
- /* service_lines[0][...] specifies lines 0-23 (1-23 used) of the first field
- service_lines[1][...] specifies lines 0-23 (1-23 used) of the second field
- (equals frame lines 313-336 for 625 line video
- standards, 263-286 for 525 line standards) */
- __u16 service_lines[2][24];
- __u32 type; /* enum v4l2_buf_type */
- __u32 reserved[3]; /* must be 0 */
-};
-
-struct v4l2_sliced_vbi_data {
- __u32 id;
- __u32 field; /* 0: first field, 1: second field */
- __u32 line; /* 1-23 */
- __u32 reserved; /* must be 0 */
- __u8 data[48];
-};
-
-/*
- * Sliced VBI data inserted into MPEG Streams
- */
-
-/*
- * V4L2_MPEG_STREAM_VBI_FMT_IVTV:
- *
- * Structure of payload contained in an MPEG 2 Private Stream 1 PES Packet in an
- * MPEG-2 Program Pack that contains V4L2_MPEG_STREAM_VBI_FMT_IVTV Sliced VBI
- * data
- *
- * Note, the MPEG-2 Program Pack and Private Stream 1 PES packet header
- * definitions are not included here. See the MPEG-2 specifications for details
- * on these headers.
- */
-
-/* Line type IDs */
-#define V4L2_MPEG_VBI_IVTV_TELETEXT_B (1)
-#define V4L2_MPEG_VBI_IVTV_CAPTION_525 (4)
-#define V4L2_MPEG_VBI_IVTV_WSS_625 (5)
-#define V4L2_MPEG_VBI_IVTV_VPS (7)
-
-struct v4l2_mpeg_vbi_itv0_line {
- __u8 id; /* One of V4L2_MPEG_VBI_IVTV_* above */
- __u8 data[42]; /* Sliced VBI data for the line */
-} __attribute__ ((packed));
-
-struct v4l2_mpeg_vbi_itv0 {
- __le32 linemask[2]; /* Bitmasks of VBI service lines present */
- struct v4l2_mpeg_vbi_itv0_line line[35];
-} __attribute__ ((packed));
-
-struct v4l2_mpeg_vbi_ITV0 {
- struct v4l2_mpeg_vbi_itv0_line line[36];
-} __attribute__ ((packed));
-
-#define V4L2_MPEG_VBI_IVTV_MAGIC0 "itv0"
-#define V4L2_MPEG_VBI_IVTV_MAGIC1 "ITV0"
-
-struct v4l2_mpeg_vbi_fmt_ivtv {
- __u8 magic[4];
- union {
- struct v4l2_mpeg_vbi_itv0 itv0;
- struct v4l2_mpeg_vbi_ITV0 ITV0;
- };
-} __attribute__ ((packed));
-
-/*
- * A G G R E G A T E S T R U C T U R E S
- */
-
-/**
- * struct v4l2_plane_pix_format - additional, per-plane format definition
- * @sizeimage: maximum size in bytes required for data, for which
- * this plane will be used
- * @bytesperline: distance in bytes between the leftmost pixels in two
- * adjacent lines
- */
-struct v4l2_plane_pix_format {
- __u32 sizeimage;
- __u16 bytesperline;
- __u16 reserved[7];
-} __attribute__ ((packed));
-
-/**
- * struct v4l2_pix_format_mplane - multiplanar format definition
- * @width: image width in pixels
- * @height: image height in pixels
- * @pixelformat: little endian four character code (fourcc)
- * @field: enum v4l2_field; field order (for interlaced video)
- * @colorspace: enum v4l2_colorspace; supplemental to pixelformat
- * @plane_fmt: per-plane information
- * @num_planes: number of planes for this format
- */
-struct v4l2_pix_format_mplane {
- __u32 width;
- __u32 height;
- __u32 pixelformat;
- __u32 field;
- __u32 colorspace;
-
- struct v4l2_plane_pix_format plane_fmt[VIDEO_MAX_PLANES];
- __u8 num_planes;
- __u8 reserved[11];
-} __attribute__ ((packed));
-
-/**
- * struct v4l2_format - stream data format
- * @type: enum v4l2_buf_type; type of the data stream
- * @pix: definition of an image format
- * @pix_mp: definition of a multiplanar image format
- * @win: definition of an overlaid image
- * @vbi: raw VBI capture or output parameters
- * @sliced: sliced VBI capture or output parameters
- * @raw_data: placeholder for future extensions and custom formats
- */
-struct v4l2_format {
- __u32 type;
- union {
- struct v4l2_pix_format pix; /* V4L2_BUF_TYPE_VIDEO_CAPTURE */
- struct v4l2_pix_format_mplane pix_mp; /* V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE */
- struct v4l2_window win; /* V4L2_BUF_TYPE_VIDEO_OVERLAY */
- struct v4l2_vbi_format vbi; /* V4L2_BUF_TYPE_VBI_CAPTURE */
- struct v4l2_sliced_vbi_format sliced; /* V4L2_BUF_TYPE_SLICED_VBI_CAPTURE */
- __u8 raw_data[200]; /* user-defined */
- } fmt;
-};
-
-/* Stream type-dependent parameters
- */
-struct v4l2_streamparm {
- __u32 type; /* enum v4l2_buf_type */
- union {
- struct v4l2_captureparm capture;
- struct v4l2_outputparm output;
- __u8 raw_data[200]; /* user-defined */
- } parm;
-};
-
-/*
- * E V E N T S
- */
-
-#define V4L2_EVENT_ALL 0
-#define V4L2_EVENT_VSYNC 1
-#define V4L2_EVENT_EOS 2
-#define V4L2_EVENT_CTRL 3
-#define V4L2_EVENT_FRAME_SYNC 4
-#define V4L2_EVENT_PRIVATE_START 0x08000000
-
-/* Payload for V4L2_EVENT_VSYNC */
-struct v4l2_event_vsync {
- /* Can be V4L2_FIELD_ANY, _NONE, _TOP or _BOTTOM */
- __u8 field;
-} __attribute__ ((packed));
-
-/* Payload for V4L2_EVENT_CTRL */
-#define V4L2_EVENT_CTRL_CH_VALUE (1 << 0)
-#define V4L2_EVENT_CTRL_CH_FLAGS (1 << 1)
-
-struct v4l2_event_ctrl {
- __u32 changes;
- __u32 type;
- union {
- __s32 value;
- __s64 value64;
- };
- __u32 flags;
- __s32 minimum;
- __s32 maximum;
- __s32 step;
- __s32 default_value;
-};
-
-struct v4l2_event_frame_sync {
- __u32 frame_sequence;
-};
-
-struct v4l2_event {
- __u32 type;
- union {
- struct v4l2_event_vsync vsync;
- struct v4l2_event_ctrl ctrl;
- struct v4l2_event_frame_sync frame_sync;
- __u8 data[64];
- } u;
- __u32 pending;
- __u32 sequence;
- struct timespec timestamp;
- __u32 id;
- __u32 reserved[8];
-};
-
-#define V4L2_EVENT_SUB_FL_SEND_INITIAL (1 << 0)
-#define V4L2_EVENT_SUB_FL_ALLOW_FEEDBACK (1 << 1)
-
-struct v4l2_event_subscription {
- __u32 type;
- __u32 id;
- __u32 flags;
- __u32 reserved[5];
-};
-
-/*
- * A D V A N C E D D E B U G G I N G
- *
- * NOTE: EXPERIMENTAL API, NEVER RELY ON THIS IN APPLICATIONS!
- * FOR DEBUGGING, TESTING AND INTERNAL USE ONLY!
- */
-
-/* VIDIOC_DBG_G_REGISTER and VIDIOC_DBG_S_REGISTER */
-
-#define V4L2_CHIP_MATCH_HOST 0 /* Match against chip ID on host (0 for the host) */
-#define V4L2_CHIP_MATCH_I2C_DRIVER 1 /* Match against I2C driver name */
-#define V4L2_CHIP_MATCH_I2C_ADDR 2 /* Match against I2C 7-bit address */
-#define V4L2_CHIP_MATCH_AC97 3 /* Match against anciliary AC97 chip */
-
-struct v4l2_dbg_match {
- __u32 type; /* Match type */
- union { /* Match this chip, meaning determined by type */
- __u32 addr;
- char name[32];
- };
-} __attribute__ ((packed));
-
-struct v4l2_dbg_register {
- struct v4l2_dbg_match match;
- __u32 size; /* register size in bytes */
- __u64 reg;
- __u64 val;
-} __attribute__ ((packed));
-
-/* VIDIOC_DBG_G_CHIP_IDENT */
-struct v4l2_dbg_chip_ident {
- struct v4l2_dbg_match match;
- __u32 ident; /* chip identifier as specified in <media/v4l2-chip-ident.h> */
- __u32 revision; /* chip revision, chip specific */
-} __attribute__ ((packed));
-
-/**
- * struct v4l2_create_buffers - VIDIOC_CREATE_BUFS argument
- * @index: on return, index of the first created buffer
- * @count: entry: number of requested buffers,
- * return: number of created buffers
- * @memory: enum v4l2_memory; buffer memory type
- * @format: frame format, for which buffers are requested
- * @reserved: future extensions
- */
-struct v4l2_create_buffers {
- __u32 index;
- __u32 count;
- __u32 memory;
- struct v4l2_format format;
- __u32 reserved[8];
-};
-
-/*
- * I O C T L C O D E S F O R V I D E O D E V I C E S
- *
- */
-#define VIDIOC_QUERYCAP _IOR('V', 0, struct v4l2_capability)
-#define VIDIOC_RESERVED _IO('V', 1)
-#define VIDIOC_ENUM_FMT _IOWR('V', 2, struct v4l2_fmtdesc)
-#define VIDIOC_G_FMT _IOWR('V', 4, struct v4l2_format)
-#define VIDIOC_S_FMT _IOWR('V', 5, struct v4l2_format)
-#define VIDIOC_REQBUFS _IOWR('V', 8, struct v4l2_requestbuffers)
-#define VIDIOC_QUERYBUF _IOWR('V', 9, struct v4l2_buffer)
-#define VIDIOC_G_FBUF _IOR('V', 10, struct v4l2_framebuffer)
-#define VIDIOC_S_FBUF _IOW('V', 11, struct v4l2_framebuffer)
-#define VIDIOC_OVERLAY _IOW('V', 14, int)
-#define VIDIOC_QBUF _IOWR('V', 15, struct v4l2_buffer)
-#define VIDIOC_DQBUF _IOWR('V', 17, struct v4l2_buffer)
-#define VIDIOC_STREAMON _IOW('V', 18, int)
-#define VIDIOC_STREAMOFF _IOW('V', 19, int)
-#define VIDIOC_G_PARM _IOWR('V', 21, struct v4l2_streamparm)
-#define VIDIOC_S_PARM _IOWR('V', 22, struct v4l2_streamparm)
-#define VIDIOC_G_STD _IOR('V', 23, v4l2_std_id)
-#define VIDIOC_S_STD _IOW('V', 24, v4l2_std_id)
-#define VIDIOC_ENUMSTD _IOWR('V', 25, struct v4l2_standard)
-#define VIDIOC_ENUMINPUT _IOWR('V', 26, struct v4l2_input)
-#define VIDIOC_G_CTRL _IOWR('V', 27, struct v4l2_control)
-#define VIDIOC_S_CTRL _IOWR('V', 28, struct v4l2_control)
-#define VIDIOC_G_TUNER _IOWR('V', 29, struct v4l2_tuner)
-#define VIDIOC_S_TUNER _IOW('V', 30, struct v4l2_tuner)
-#define VIDIOC_G_AUDIO _IOR('V', 33, struct v4l2_audio)
-#define VIDIOC_S_AUDIO _IOW('V', 34, struct v4l2_audio)
-#define VIDIOC_QUERYCTRL _IOWR('V', 36, struct v4l2_queryctrl)
-#define VIDIOC_QUERYMENU _IOWR('V', 37, struct v4l2_querymenu)
-#define VIDIOC_G_INPUT _IOR('V', 38, int)
-#define VIDIOC_S_INPUT _IOWR('V', 39, int)
-#define VIDIOC_G_OUTPUT _IOR('V', 46, int)
-#define VIDIOC_S_OUTPUT _IOWR('V', 47, int)
-#define VIDIOC_ENUMOUTPUT _IOWR('V', 48, struct v4l2_output)
-#define VIDIOC_G_AUDOUT _IOR('V', 49, struct v4l2_audioout)
-#define VIDIOC_S_AUDOUT _IOW('V', 50, struct v4l2_audioout)
-#define VIDIOC_G_MODULATOR _IOWR('V', 54, struct v4l2_modulator)
-#define VIDIOC_S_MODULATOR _IOW('V', 55, struct v4l2_modulator)
-#define VIDIOC_G_FREQUENCY _IOWR('V', 56, struct v4l2_frequency)
-#define VIDIOC_S_FREQUENCY _IOW('V', 57, struct v4l2_frequency)
-#define VIDIOC_CROPCAP _IOWR('V', 58, struct v4l2_cropcap)
-#define VIDIOC_G_CROP _IOWR('V', 59, struct v4l2_crop)
-#define VIDIOC_S_CROP _IOW('V', 60, struct v4l2_crop)
-#define VIDIOC_G_JPEGCOMP _IOR('V', 61, struct v4l2_jpegcompression)
-#define VIDIOC_S_JPEGCOMP _IOW('V', 62, struct v4l2_jpegcompression)
-#define VIDIOC_QUERYSTD _IOR('V', 63, v4l2_std_id)
-#define VIDIOC_TRY_FMT _IOWR('V', 64, struct v4l2_format)
-#define VIDIOC_ENUMAUDIO _IOWR('V', 65, struct v4l2_audio)
-#define VIDIOC_ENUMAUDOUT _IOWR('V', 66, struct v4l2_audioout)
-#define VIDIOC_G_PRIORITY _IOR('V', 67, __u32) /* enum v4l2_priority */
-#define VIDIOC_S_PRIORITY _IOW('V', 68, __u32) /* enum v4l2_priority */
-#define VIDIOC_G_SLICED_VBI_CAP _IOWR('V', 69, struct v4l2_sliced_vbi_cap)
-#define VIDIOC_LOG_STATUS _IO('V', 70)
-#define VIDIOC_G_EXT_CTRLS _IOWR('V', 71, struct v4l2_ext_controls)
-#define VIDIOC_S_EXT_CTRLS _IOWR('V', 72, struct v4l2_ext_controls)
-#define VIDIOC_TRY_EXT_CTRLS _IOWR('V', 73, struct v4l2_ext_controls)
-#if 1
-#define VIDIOC_ENUM_FRAMESIZES _IOWR('V', 74, struct v4l2_frmsizeenum)
-#define VIDIOC_ENUM_FRAMEINTERVALS _IOWR('V', 75, struct v4l2_frmivalenum)
-#define VIDIOC_G_ENC_INDEX _IOR('V', 76, struct v4l2_enc_idx)
-#define VIDIOC_ENCODER_CMD _IOWR('V', 77, struct v4l2_encoder_cmd)
-#define VIDIOC_TRY_ENCODER_CMD _IOWR('V', 78, struct v4l2_encoder_cmd)
-#endif
-
-#if 1
-/* Experimental, meant for debugging, testing and internal use.
- Only implemented if CONFIG_VIDEO_ADV_DEBUG is defined.
- You must be root to use these ioctls. Never use these in applications! */
-#define VIDIOC_DBG_S_REGISTER _IOW('V', 79, struct v4l2_dbg_register)
-#define VIDIOC_DBG_G_REGISTER _IOWR('V', 80, struct v4l2_dbg_register)
-
-/* Experimental, meant for debugging, testing and internal use.
- Never use this ioctl in applications! */
-#define VIDIOC_DBG_G_CHIP_IDENT _IOWR('V', 81, struct v4l2_dbg_chip_ident)
-#endif
-
-#define VIDIOC_S_HW_FREQ_SEEK _IOW('V', 82, struct v4l2_hw_freq_seek)
-
-/* These four DV Preset ioctls are deprecated in favor of the DV Timings
- ioctls. */
-#define VIDIOC_ENUM_DV_PRESETS _IOWR('V', 83, struct v4l2_dv_enum_preset)
-#define VIDIOC_S_DV_PRESET _IOWR('V', 84, struct v4l2_dv_preset)
-#define VIDIOC_G_DV_PRESET _IOWR('V', 85, struct v4l2_dv_preset)
-#define VIDIOC_QUERY_DV_PRESET _IOR('V', 86, struct v4l2_dv_preset)
-#define VIDIOC_S_DV_TIMINGS _IOWR('V', 87, struct v4l2_dv_timings)
-#define VIDIOC_G_DV_TIMINGS _IOWR('V', 88, struct v4l2_dv_timings)
-#define VIDIOC_DQEVENT _IOR('V', 89, struct v4l2_event)
-#define VIDIOC_SUBSCRIBE_EVENT _IOW('V', 90, struct v4l2_event_subscription)
-#define VIDIOC_UNSUBSCRIBE_EVENT _IOW('V', 91, struct v4l2_event_subscription)
-
-/* Experimental, the below two ioctls may change over the next couple of kernel
- versions */
-#define VIDIOC_CREATE_BUFS _IOWR('V', 92, struct v4l2_create_buffers)
-#define VIDIOC_PREPARE_BUF _IOWR('V', 93, struct v4l2_buffer)
-
-/* Experimental selection API */
-#define VIDIOC_G_SELECTION _IOWR('V', 94, struct v4l2_selection)
-#define VIDIOC_S_SELECTION _IOWR('V', 95, struct v4l2_selection)
-
-/* Experimental, these two ioctls may change over the next couple of kernel
- versions. */
-#define VIDIOC_DECODER_CMD _IOWR('V', 96, struct v4l2_decoder_cmd)
-#define VIDIOC_TRY_DECODER_CMD _IOWR('V', 97, struct v4l2_decoder_cmd)
-
-/* Experimental, these three ioctls may change over the next couple of kernel
- versions. */
-#define VIDIOC_ENUM_DV_TIMINGS _IOWR('V', 98, struct v4l2_enum_dv_timings)
-#define VIDIOC_QUERY_DV_TIMINGS _IOR('V', 99, struct v4l2_dv_timings)
-#define VIDIOC_DV_TIMINGS_CAP _IOWR('V', 100, struct v4l2_dv_timings_cap)
-
-/* Experimental, this ioctl may change over the next couple of kernel
- versions. */
-#define VIDIOC_ENUM_FREQ_BANDS _IOWR('V', 101, struct v4l2_frequency_band)
-
-/* Reminder: when adding new ioctls please add support for them to
- drivers/media/video/v4l2-compat-ioctl32.c as well! */
-
-#define BASE_VIDIOC_PRIVATE 192 /* 192-255 are private */
+#include <uapi/linux/videodev2.h>
#endif /* __LINUX_VIDEODEV2_H */
diff --git a/include/linux/virtio_config.h b/include/linux/virtio_config.h
index e2850a7..29b9104 100644
--- a/include/linux/virtio_config.h
+++ b/include/linux/virtio_config.h
@@ -1,60 +1,10 @@
#ifndef _LINUX_VIRTIO_CONFIG_H
#define _LINUX_VIRTIO_CONFIG_H
-/* This header, excluding the #ifdef __KERNEL__ part, is BSD licensed so
- * anyone can use the definitions to implement compatible drivers/servers.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. Neither the name of IBM nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE. */
-/* Virtio devices use a standardized configuration space to define their
- * features and pass configuration information, but each implementation can
- * store and access that space differently. */
-#include <linux/types.h>
-
-/* Status byte for guest to report progress, and synchronize features. */
-/* We have seen device and processed generic fields (VIRTIO_CONFIG_F_VIRTIO) */
-#define VIRTIO_CONFIG_S_ACKNOWLEDGE 1
-/* We have found a driver for the device. */
-#define VIRTIO_CONFIG_S_DRIVER 2
-/* Driver has used its parts of the config, and is happy */
-#define VIRTIO_CONFIG_S_DRIVER_OK 4
-/* We've given up on this device. */
-#define VIRTIO_CONFIG_S_FAILED 0x80
-
-/* Some virtio feature bits (currently bits 28 through 31) are reserved for the
- * transport being used (eg. virtio_ring), the rest are per-device feature
- * bits. */
-#define VIRTIO_TRANSPORT_F_START 28
-#define VIRTIO_TRANSPORT_F_END 32
-
-/* Do we get callbacks when the ring is completely used, even if we've
- * suppressed them? */
-#define VIRTIO_F_NOTIFY_ON_EMPTY 24
-
-#ifdef __KERNEL__
#include <linux/err.h>
#include <linux/bug.h>
#include <linux/virtio.h>
+#include <uapi/linux/virtio_config.h>
/**
* virtio_config_ops - operations for configuring a virtio device
@@ -213,5 +163,4 @@
}
-#endif /* __KERNEL__ */
#endif /* _LINUX_VIRTIO_CONFIG_H */
diff --git a/include/linux/virtio_console.h b/include/linux/virtio_console.h
index bdf4b00..d2e2785 100644
--- a/include/linux/virtio_console.h
+++ b/include/linux/virtio_console.h
@@ -1,8 +1,3 @@
-#ifndef _LINUX_VIRTIO_CONSOLE_H
-#define _LINUX_VIRTIO_CONSOLE_H
-#include <linux/types.h>
-#include <linux/virtio_ids.h>
-#include <linux/virtio_config.h>
/*
* This header, excluding the #ifdef __KERNEL__ part, is BSD licensed so
* anyone can use the definitions to implement compatible drivers/servers:
@@ -34,44 +29,10 @@
* Copyright (C) Red Hat, Inc., 2009, 2010, 2011
* Copyright (C) Amit Shah <amit.shah@redhat.com>, 2009, 2010, 2011
*/
+#ifndef _LINUX_VIRTIO_CONSOLE_H
+#define _LINUX_VIRTIO_CONSOLE_H
-/* Feature bits */
-#define VIRTIO_CONSOLE_F_SIZE 0 /* Does host provide console size? */
-#define VIRTIO_CONSOLE_F_MULTIPORT 1 /* Does host provide multiple ports? */
+#include <uapi/linux/virtio_console.h>
-#define VIRTIO_CONSOLE_BAD_ID (~(u32)0)
-
-struct virtio_console_config {
- /* colums of the screens */
- __u16 cols;
- /* rows of the screens */
- __u16 rows;
- /* max. number of ports this device can hold */
- __u32 max_nr_ports;
-} __attribute__((packed));
-
-/*
- * A message that's passed between the Host and the Guest for a
- * particular port.
- */
-struct virtio_console_control {
- __u32 id; /* Port number */
- __u16 event; /* The kind of control event (see below) */
- __u16 value; /* Extra information for the key */
-};
-
-/* Some events for control messages */
-#define VIRTIO_CONSOLE_DEVICE_READY 0
-#define VIRTIO_CONSOLE_PORT_ADD 1
-#define VIRTIO_CONSOLE_PORT_REMOVE 2
-#define VIRTIO_CONSOLE_PORT_READY 3
-#define VIRTIO_CONSOLE_CONSOLE_PORT 4
-#define VIRTIO_CONSOLE_RESIZE 5
-#define VIRTIO_CONSOLE_PORT_OPEN 6
-#define VIRTIO_CONSOLE_PORT_NAME 7
-
-#ifdef __KERNEL__
int __init virtio_cons_early_init(int (*put_chars)(u32, const char *, int));
-#endif /* __KERNEL__ */
-
#endif /* _LINUX_VIRTIO_CONSOLE_H */
diff --git a/include/linux/virtio_ring.h b/include/linux/virtio_ring.h
index c2d793a..63c6ea19 100644
--- a/include/linux/virtio_ring.h
+++ b/include/linux/virtio_ring.h
@@ -1,167 +1,9 @@
#ifndef _LINUX_VIRTIO_RING_H
#define _LINUX_VIRTIO_RING_H
-/* An interface for efficient virtio implementation, currently for use by KVM
- * and lguest, but hopefully others soon. Do NOT change this since it will
- * break existing servers and clients.
- *
- * This header is BSD licensed so anyone can use the definitions to implement
- * compatible drivers/servers.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. Neither the name of IBM nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * Copyright Rusty Russell IBM Corporation 2007. */
-#include <linux/types.h>
-/* This marks a buffer as continuing via the next field. */
-#define VRING_DESC_F_NEXT 1
-/* This marks a buffer as write-only (otherwise read-only). */
-#define VRING_DESC_F_WRITE 2
-/* This means the buffer contains a list of buffer descriptors. */
-#define VRING_DESC_F_INDIRECT 4
-
-/* The Host uses this in used->flags to advise the Guest: don't kick me when
- * you add a buffer. It's unreliable, so it's simply an optimization. Guest
- * will still kick if it's out of buffers. */
-#define VRING_USED_F_NO_NOTIFY 1
-/* The Guest uses this in avail->flags to advise the Host: don't interrupt me
- * when you consume a buffer. It's unreliable, so it's simply an
- * optimization. */
-#define VRING_AVAIL_F_NO_INTERRUPT 1
-
-/* We support indirect buffer descriptors */
-#define VIRTIO_RING_F_INDIRECT_DESC 28
-
-/* The Guest publishes the used index for which it expects an interrupt
- * at the end of the avail ring. Host should ignore the avail->flags field. */
-/* The Host publishes the avail index for which it expects a kick
- * at the end of the used ring. Guest should ignore the used->flags field. */
-#define VIRTIO_RING_F_EVENT_IDX 29
-
-/* Virtio ring descriptors: 16 bytes. These can chain together via "next". */
-struct vring_desc {
- /* Address (guest-physical). */
- __u64 addr;
- /* Length. */
- __u32 len;
- /* The flags as indicated above. */
- __u16 flags;
- /* We chain unused descriptors via this, too */
- __u16 next;
-};
-
-struct vring_avail {
- __u16 flags;
- __u16 idx;
- __u16 ring[];
-};
-
-/* u32 is used here for ids for padding reasons. */
-struct vring_used_elem {
- /* Index of start of used descriptor chain. */
- __u32 id;
- /* Total length of the descriptor chain which was used (written to) */
- __u32 len;
-};
-
-struct vring_used {
- __u16 flags;
- __u16 idx;
- struct vring_used_elem ring[];
-};
-
-struct vring {
- unsigned int num;
-
- struct vring_desc *desc;
-
- struct vring_avail *avail;
-
- struct vring_used *used;
-};
-
-/* The standard layout for the ring is a continuous chunk of memory which looks
- * like this. We assume num is a power of 2.
- *
- * struct vring
- * {
- * // The actual descriptors (16 bytes each)
- * struct vring_desc desc[num];
- *
- * // A ring of available descriptor heads with free-running index.
- * __u16 avail_flags;
- * __u16 avail_idx;
- * __u16 available[num];
- * __u16 used_event_idx;
- *
- * // Padding to the next align boundary.
- * char pad[];
- *
- * // A ring of used descriptor heads with free-running index.
- * __u16 used_flags;
- * __u16 used_idx;
- * struct vring_used_elem used[num];
- * __u16 avail_event_idx;
- * };
- */
-/* We publish the used event index at the end of the available ring, and vice
- * versa. They are at the end for backwards compatibility. */
-#define vring_used_event(vr) ((vr)->avail->ring[(vr)->num])
-#define vring_avail_event(vr) (*(__u16 *)&(vr)->used->ring[(vr)->num])
-
-static inline void vring_init(struct vring *vr, unsigned int num, void *p,
- unsigned long align)
-{
- vr->num = num;
- vr->desc = p;
- vr->avail = p + num*sizeof(struct vring_desc);
- vr->used = (void *)(((unsigned long)&vr->avail->ring[num] + sizeof(__u16)
- + align-1) & ~(align - 1));
-}
-
-static inline unsigned vring_size(unsigned int num, unsigned long align)
-{
- return ((sizeof(struct vring_desc) * num + sizeof(__u16) * (3 + num)
- + align - 1) & ~(align - 1))
- + sizeof(__u16) * 3 + sizeof(struct vring_used_elem) * num;
-}
-
-/* The following is used with USED_EVENT_IDX and AVAIL_EVENT_IDX */
-/* Assuming a given event_idx value from the other size, if
- * we have just incremented index from old to new_idx,
- * should we trigger an event? */
-static inline int vring_need_event(__u16 event_idx, __u16 new_idx, __u16 old)
-{
- /* Note: Xen has similar logic for notification hold-off
- * in include/xen/interface/io/ring.h with req_event and req_prod
- * corresponding to event_idx + 1 and new_idx respectively.
- * Note also that req_event and req_prod in Xen start at 1,
- * event indexes in virtio start at 0. */
- return (__u16)(new_idx - event_idx - 1) < (__u16)(new_idx - old);
-}
-
-#ifdef __KERNEL__
#include <linux/irqreturn.h>
+#include <uapi/linux/virtio_ring.h>
+
struct virtio_device;
struct virtqueue;
@@ -179,5 +21,4 @@
void vring_transport_features(struct virtio_device *vdev);
irqreturn_t vring_interrupt(int irq, void *_vq);
-#endif /* __KERNEL__ */
#endif /* _LINUX_VIRTIO_RING_H */
diff --git a/include/linux/vt.h b/include/linux/vt.h
index 30a8dd9..b186e04 100644
--- a/include/linux/vt.h
+++ b/include/linux/vt.h
@@ -1,90 +1,8 @@
#ifndef _LINUX_VT_H
#define _LINUX_VT_H
+#include <uapi/linux/vt.h>
-/*
- * These constants are also useful for user-level apps (e.g., VC
- * resizing).
- */
-#define MIN_NR_CONSOLES 1 /* must be at least 1 */
-#define MAX_NR_CONSOLES 63 /* serial lines start at 64 */
-#define MAX_NR_USER_CONSOLES 63 /* must be root to allocate above this */
- /* Note: the ioctl VT_GETSTATE does not work for
- consoles 16 and higher (since it returns a short) */
-
-/* 0x56 is 'V', to avoid collision with termios and kd */
-
-#define VT_OPENQRY 0x5600 /* find available vt */
-
-struct vt_mode {
- char mode; /* vt mode */
- char waitv; /* if set, hang on writes if not active */
- short relsig; /* signal to raise on release req */
- short acqsig; /* signal to raise on acquisition */
- short frsig; /* unused (set to 0) */
-};
-#define VT_GETMODE 0x5601 /* get mode of active vt */
-#define VT_SETMODE 0x5602 /* set mode of active vt */
-#define VT_AUTO 0x00 /* auto vt switching */
-#define VT_PROCESS 0x01 /* process controls switching */
-#define VT_ACKACQ 0x02 /* acknowledge switch */
-
-struct vt_stat {
- unsigned short v_active; /* active vt */
- unsigned short v_signal; /* signal to send */
- unsigned short v_state; /* vt bitmask */
-};
-#define VT_GETSTATE 0x5603 /* get global vt state info */
-#define VT_SENDSIG 0x5604 /* signal to send to bitmask of vts */
-
-#define VT_RELDISP 0x5605 /* release display */
-
-#define VT_ACTIVATE 0x5606 /* make vt active */
-#define VT_WAITACTIVE 0x5607 /* wait for vt active */
-#define VT_DISALLOCATE 0x5608 /* free memory associated to vt */
-
-struct vt_sizes {
- unsigned short v_rows; /* number of rows */
- unsigned short v_cols; /* number of columns */
- unsigned short v_scrollsize; /* number of lines of scrollback */
-};
-#define VT_RESIZE 0x5609 /* set kernel's idea of screensize */
-
-struct vt_consize {
- unsigned short v_rows; /* number of rows */
- unsigned short v_cols; /* number of columns */
- unsigned short v_vlin; /* number of pixel rows on screen */
- unsigned short v_clin; /* number of pixel rows per character */
- unsigned short v_vcol; /* number of pixel columns on screen */
- unsigned short v_ccol; /* number of pixel columns per character */
-};
-#define VT_RESIZEX 0x560A /* set kernel's idea of screensize + more */
-#define VT_LOCKSWITCH 0x560B /* disallow vt switching */
-#define VT_UNLOCKSWITCH 0x560C /* allow vt switching */
-#define VT_GETHIFONTMASK 0x560D /* return hi font mask */
-
-struct vt_event {
- unsigned int event;
-#define VT_EVENT_SWITCH 0x0001 /* Console switch */
-#define VT_EVENT_BLANK 0x0002 /* Screen blank */
-#define VT_EVENT_UNBLANK 0x0004 /* Screen unblank */
-#define VT_EVENT_RESIZE 0x0008 /* Resize display */
-#define VT_MAX_EVENT 0x000F
- unsigned int oldev; /* Old console */
- unsigned int newev; /* New console (if changing) */
- unsigned int pad[4]; /* Padding for expansion */
-};
-
-#define VT_WAITEVENT 0x560E /* Wait for an event */
-
-struct vt_setactivate {
- unsigned int console;
- struct vt_mode mode;
-};
-
-#define VT_SETACTIVATE 0x560F /* Activate and set the mode of a console */
-
-#ifdef __KERNEL__
/* Virtual Terminal events. */
#define VT_ALLOCATE 0x0001 /* Console got allocated */
@@ -106,8 +24,4 @@
#endif
-#endif /* __KERNEL__ */
-
-#define vt_get_kmsg_redirect() vt_kmsg_redirect(-1)
-
#endif /* _LINUX_VT_H */
diff --git a/include/linux/wait.h b/include/linux/wait.h
index 1dee81c..168dfe1 100644
--- a/include/linux/wait.h
+++ b/include/linux/wait.h
@@ -1,28 +1,12 @@
#ifndef _LINUX_WAIT_H
#define _LINUX_WAIT_H
-#define WNOHANG 0x00000001
-#define WUNTRACED 0x00000002
-#define WSTOPPED WUNTRACED
-#define WEXITED 0x00000004
-#define WCONTINUED 0x00000008
-#define WNOWAIT 0x01000000 /* Don't reap, just poll status. */
-
-#define __WNOTHREAD 0x20000000 /* Don't wait on children of other threads in this group */
-#define __WALL 0x40000000 /* Wait on all children, regardless of type */
-#define __WCLONE 0x80000000 /* Wait only on non-SIGCHLD children */
-
-/* First argument to waitid: */
-#define P_ALL 0
-#define P_PID 1
-#define P_PGID 2
-
-#ifdef __KERNEL__
#include <linux/list.h>
#include <linux/stddef.h>
#include <linux/spinlock.h>
#include <asm/current.h>
+#include <uapi/linux/wait.h>
typedef struct __wait_queue wait_queue_t;
typedef int (*wait_queue_func_t)(wait_queue_t *wait, unsigned mode, int flags, void *key);
@@ -663,6 +647,4 @@
return out_of_line_wait_on_bit_lock(word, bit, action, mode);
}
-#endif /* __KERNEL__ */
-
#endif
diff --git a/include/linux/wanrouter.h b/include/linux/wanrouter.h
index 3157cc1..cec4b41 100644
--- a/include/linux/wanrouter.h
+++ b/include/linux/wanrouter.h
@@ -43,413 +43,11 @@
* Jan 16, 1997 Gene Kozin router_devlist made public
* Jan 02, 1997 Gene Kozin Initial version (based on wanpipe.h).
*****************************************************************************/
-
#ifndef _ROUTER_H
#define _ROUTER_H
-#define ROUTER_NAME "wanrouter" /* in case we ever change it */
-#define ROUTER_VERSION 1 /* version number */
-#define ROUTER_RELEASE 1 /* release (minor version) number */
-#define ROUTER_IOCTL 'W' /* for IOCTL calls */
-#define ROUTER_MAGIC 0x524D4157L /* signature: 'WANR' reversed */
+#include <uapi/linux/wanrouter.h>
-/* IOCTL codes for /proc/router/<device> entries (up to 255) */
-enum router_ioctls
-{
- ROUTER_SETUP = ROUTER_IOCTL<<8, /* configure device */
- ROUTER_DOWN, /* shut down device */
- ROUTER_STAT, /* get device status */
- ROUTER_IFNEW, /* add interface */
- ROUTER_IFDEL, /* delete interface */
- ROUTER_IFSTAT, /* get interface status */
- ROUTER_USER = (ROUTER_IOCTL<<8)+16, /* driver-specific calls */
- ROUTER_USER_MAX = (ROUTER_IOCTL<<8)+31
-};
-
-/* identifiers for displaying proc file data for dual port adapters */
-#define PROC_DATA_PORT_0 0x8000 /* the data is for port 0 */
-#define PROC_DATA_PORT_1 0x8001 /* the data is for port 1 */
-
-/* NLPID for packet encapsulation (ISO/IEC TR 9577) */
-#define NLPID_IP 0xCC /* Internet Protocol Datagram */
-#define NLPID_SNAP 0x80 /* IEEE Subnetwork Access Protocol */
-#define NLPID_CLNP 0x81 /* ISO/IEC 8473 */
-#define NLPID_ESIS 0x82 /* ISO/IEC 9542 */
-#define NLPID_ISIS 0x83 /* ISO/IEC ISIS */
-#define NLPID_Q933 0x08 /* CCITT Q.933 */
-
-/* Miscellaneous */
-#define WAN_IFNAME_SZ 15 /* max length of the interface name */
-#define WAN_DRVNAME_SZ 15 /* max length of the link driver name */
-#define WAN_ADDRESS_SZ 31 /* max length of the WAN media address */
-#define USED_BY_FIELD 8 /* max length of the used by field */
-
-/* Defines for UDP PACKET TYPE */
-#define UDP_PTPIPE_TYPE 0x01
-#define UDP_FPIPE_TYPE 0x02
-#define UDP_CPIPE_TYPE 0x03
-#define UDP_DRVSTATS_TYPE 0x04
-#define UDP_INVALID_TYPE 0x05
-
-/* Command return code */
-#define CMD_OK 0 /* normal firmware return code */
-#define CMD_TIMEOUT 0xFF /* firmware command timed out */
-
-/* UDP Packet Management */
-#define UDP_PKT_FRM_STACK 0x00
-#define UDP_PKT_FRM_NETWORK 0x01
-
-/* Maximum interrupt test counter */
-#define MAX_INTR_TEST_COUNTER 100
-
-/* Critical Values for RACE conditions*/
-#define CRITICAL_IN_ISR 0xA1
-#define CRITICAL_INTR_HANDLED 0xB1
-
-/****** Data Types **********************************************************/
-
-/*----------------------------------------------------------------------------
- * X.25-specific link-level configuration.
- */
-typedef struct wan_x25_conf
-{
- unsigned lo_pvc; /* lowest permanent circuit number */
- unsigned hi_pvc; /* highest permanent circuit number */
- unsigned lo_svc; /* lowest switched circuit number */
- unsigned hi_svc; /* highest switched circuit number */
- unsigned hdlc_window; /* HDLC window size (1..7) */
- unsigned pkt_window; /* X.25 packet window size (1..7) */
- unsigned t1; /* HDLC timer T1, sec (1..30) */
- unsigned t2; /* HDLC timer T2, sec (0..29) */
- unsigned t4; /* HDLC supervisory frame timer = T4 * T1 */
- unsigned n2; /* HDLC retransmission limit (1..30) */
- unsigned t10_t20; /* X.25 RESTART timeout, sec (1..255) */
- unsigned t11_t21; /* X.25 CALL timeout, sec (1..255) */
- unsigned t12_t22; /* X.25 RESET timeout, sec (1..255) */
- unsigned t13_t23; /* X.25 CLEAR timeout, sec (1..255) */
- unsigned t16_t26; /* X.25 INTERRUPT timeout, sec (1..255) */
- unsigned t28; /* X.25 REGISTRATION timeout, sec (1..255) */
- unsigned r10_r20; /* RESTART retransmission limit (0..250) */
- unsigned r12_r22; /* RESET retransmission limit (0..250) */
- unsigned r13_r23; /* CLEAR retransmission limit (0..250) */
- unsigned ccitt_compat; /* compatibility mode: 1988/1984/1980 */
- unsigned x25_conf_opt; /* User defined x25 config optoins */
- unsigned char LAPB_hdlc_only; /* Run in HDLC only mode */
- unsigned char logging; /* Control connection logging */
- unsigned char oob_on_modem; /* Whether to send modem status to the user app */
-} wan_x25_conf_t;
-
-/*----------------------------------------------------------------------------
- * Frame relay specific link-level configuration.
- */
-typedef struct wan_fr_conf
-{
- unsigned signalling; /* local in-channel signalling type */
- unsigned t391; /* link integrity verification timer */
- unsigned t392; /* polling verification timer */
- unsigned n391; /* full status polling cycle counter */
- unsigned n392; /* error threshold counter */
- unsigned n393; /* monitored events counter */
- unsigned dlci_num; /* number of DLCs (access node) */
- unsigned dlci[100]; /* List of all DLCIs */
-} wan_fr_conf_t;
-
-/*----------------------------------------------------------------------------
- * PPP-specific link-level configuration.
- */
-typedef struct wan_ppp_conf
-{
- unsigned restart_tmr; /* restart timer */
- unsigned auth_rsrt_tmr; /* authentication timer */
- unsigned auth_wait_tmr; /* authentication timer */
- unsigned mdm_fail_tmr; /* modem failure timer */
- unsigned dtr_drop_tmr; /* DTR drop timer */
- unsigned connect_tmout; /* connection timeout */
- unsigned conf_retry; /* max. retry */
- unsigned term_retry; /* max. retry */
- unsigned fail_retry; /* max. retry */
- unsigned auth_retry; /* max. retry */
- unsigned auth_options; /* authentication opt. */
- unsigned ip_options; /* IP options */
- char authenticator; /* AUTHENTICATOR or not */
- char ip_mode; /* Static/Host/Peer */
-} wan_ppp_conf_t;
-
-/*----------------------------------------------------------------------------
- * CHDLC-specific link-level configuration.
- */
-typedef struct wan_chdlc_conf
-{
- unsigned char ignore_dcd; /* Protocol options: */
- unsigned char ignore_cts; /* Ignore these to determine */
- unsigned char ignore_keepalive; /* link status (Yes or No) */
- unsigned char hdlc_streaming; /* hdlc_streaming mode (Y/N) */
- unsigned char receive_only; /* no transmit buffering (Y/N) */
- unsigned keepalive_tx_tmr; /* transmit keepalive timer */
- unsigned keepalive_rx_tmr; /* receive keepalive timer */
- unsigned keepalive_err_margin; /* keepalive_error_tolerance */
- unsigned slarp_timer; /* SLARP request timer */
-} wan_chdlc_conf_t;
-
-
-/*----------------------------------------------------------------------------
- * WAN device configuration. Passed to ROUTER_SETUP IOCTL.
- */
-typedef struct wandev_conf
-{
- unsigned magic; /* magic number (for verification) */
- unsigned config_id; /* configuration structure identifier */
- /****** hardware configuration ******/
- unsigned ioport; /* adapter I/O port base */
- unsigned long maddr; /* dual-port memory address */
- unsigned msize; /* dual-port memory size */
- int irq; /* interrupt request level */
- int dma; /* DMA request level */
- char S514_CPU_no[1]; /* S514 PCI adapter CPU number ('A' or 'B') */
- unsigned PCI_slot_no; /* S514 PCI adapter slot number */
- char auto_pci_cfg; /* S515 PCI automatic slot detection */
- char comm_port; /* Communication Port (PRI=0, SEC=1) */
- unsigned bps; /* data transfer rate */
- unsigned mtu; /* maximum transmit unit size */
- unsigned udp_port; /* UDP port for management */
- unsigned char ttl; /* Time To Live for UDP security */
- unsigned char ft1; /* FT1 Configurator Option */
- char interface; /* RS-232/V.35, etc. */
- char clocking; /* external/internal */
- char line_coding; /* NRZ/NRZI/FM0/FM1, etc. */
- char station; /* DTE/DCE, primary/secondary, etc. */
- char connection; /* permanent/switched/on-demand */
- char read_mode; /* read mode: Polling or interrupt */
- char receive_only; /* disable tx buffers */
- char tty; /* Create a fake tty device */
- unsigned tty_major; /* Major number for wanpipe tty device */
- unsigned tty_minor; /* Minor number for wanpipe tty device */
- unsigned tty_mode; /* TTY operation mode SYNC or ASYNC */
- char backup; /* Backup Mode */
- unsigned hw_opt[4]; /* other hardware options */
- unsigned reserved[4];
- /****** arbitrary data ***************/
- unsigned data_size; /* data buffer size */
- void* data; /* data buffer, e.g. firmware */
- union /****** protocol-specific ************/
- {
- wan_x25_conf_t x25; /* X.25 configuration */
- wan_ppp_conf_t ppp; /* PPP configuration */
- wan_fr_conf_t fr; /* frame relay configuration */
- wan_chdlc_conf_t chdlc; /* Cisco HDLC configuration */
- } u;
-} wandev_conf_t;
-
-/* 'config_id' definitions */
-#define WANCONFIG_X25 101 /* X.25 link */
-#define WANCONFIG_FR 102 /* frame relay link */
-#define WANCONFIG_PPP 103 /* synchronous PPP link */
-#define WANCONFIG_CHDLC 104 /* Cisco HDLC Link */
-#define WANCONFIG_BSC 105 /* BiSync Streaming */
-#define WANCONFIG_HDLC 106 /* HDLC Support */
-#define WANCONFIG_MPPP 107 /* Multi Port PPP over RAW CHDLC */
-
-/*
- * Configuration options defines.
- */
-/* general options */
-#define WANOPT_OFF 0
-#define WANOPT_ON 1
-#define WANOPT_NO 0
-#define WANOPT_YES 1
-
-/* intercace options */
-#define WANOPT_RS232 0
-#define WANOPT_V35 1
-
-/* data encoding options */
-#define WANOPT_NRZ 0
-#define WANOPT_NRZI 1
-#define WANOPT_FM0 2
-#define WANOPT_FM1 3
-
-/* link type options */
-#define WANOPT_POINTTOPOINT 0 /* RTS always active */
-#define WANOPT_MULTIDROP 1 /* RTS is active when transmitting */
-
-/* clocking options */
-#define WANOPT_EXTERNAL 0
-#define WANOPT_INTERNAL 1
-
-/* station options */
-#define WANOPT_DTE 0
-#define WANOPT_DCE 1
-#define WANOPT_CPE 0
-#define WANOPT_NODE 1
-#define WANOPT_SECONDARY 0
-#define WANOPT_PRIMARY 1
-
-/* connection options */
-#define WANOPT_PERMANENT 0 /* DTR always active */
-#define WANOPT_SWITCHED 1 /* use DTR to setup link (dial-up) */
-#define WANOPT_ONDEMAND 2 /* activate DTR only before sending */
-
-/* frame relay in-channel signalling */
-#define WANOPT_FR_ANSI 1 /* ANSI T1.617 Annex D */
-#define WANOPT_FR_Q933 2 /* ITU Q.933A */
-#define WANOPT_FR_LMI 3 /* LMI */
-
-/* PPP IP Mode Options */
-#define WANOPT_PPP_STATIC 0
-#define WANOPT_PPP_HOST 1
-#define WANOPT_PPP_PEER 2
-
-/* ASY Mode Options */
-#define WANOPT_ONE 1
-#define WANOPT_TWO 2
-#define WANOPT_ONE_AND_HALF 3
-
-#define WANOPT_NONE 0
-#define WANOPT_ODD 1
-#define WANOPT_EVEN 2
-
-/* CHDLC Protocol Options */
-/* DF Commented out for now.
-
-#define WANOPT_CHDLC_NO_DCD IGNORE_DCD_FOR_LINK_STAT
-#define WANOPT_CHDLC_NO_CTS IGNORE_CTS_FOR_LINK_STAT
-#define WANOPT_CHDLC_NO_KEEPALIVE IGNORE_KPALV_FOR_LINK_STAT
-*/
-
-/* Port options */
-#define WANOPT_PRI 0
-#define WANOPT_SEC 1
-/* read mode */
-#define WANOPT_INTR 0
-#define WANOPT_POLL 1
-
-
-#define WANOPT_TTY_SYNC 0
-#define WANOPT_TTY_ASYNC 1
-/*----------------------------------------------------------------------------
- * WAN Link Status Info (for ROUTER_STAT IOCTL).
- */
-typedef struct wandev_stat
-{
- unsigned state; /* link state */
- unsigned ndev; /* number of configured interfaces */
-
- /* link/interface configuration */
- unsigned connection; /* permanent/switched/on-demand */
- unsigned media_type; /* Frame relay/PPP/X.25/SDLC, etc. */
- unsigned mtu; /* max. transmit unit for this device */
-
- /* physical level statistics */
- unsigned modem_status; /* modem status */
- unsigned rx_frames; /* received frames count */
- unsigned rx_overruns; /* receiver overrun error count */
- unsigned rx_crc_err; /* receive CRC error count */
- unsigned rx_aborts; /* received aborted frames count */
- unsigned rx_bad_length; /* unexpetedly long/short frames count */
- unsigned rx_dropped; /* frames discarded at device level */
- unsigned tx_frames; /* transmitted frames count */
- unsigned tx_underruns; /* aborted transmissions (underruns) count */
- unsigned tx_timeouts; /* transmission timeouts */
- unsigned tx_rejects; /* other transmit errors */
-
- /* media level statistics */
- unsigned rx_bad_format; /* frames with invalid format */
- unsigned rx_bad_addr; /* frames with invalid media address */
- unsigned tx_retries; /* frames re-transmitted */
- unsigned reserved[16]; /* reserved for future use */
-} wandev_stat_t;
-
-/* 'state' defines */
-enum wan_states
-{
- WAN_UNCONFIGURED, /* link/channel is not configured */
- WAN_DISCONNECTED, /* link/channel is disconnected */
- WAN_CONNECTING, /* connection is in progress */
- WAN_CONNECTED, /* link/channel is operational */
- WAN_LIMIT, /* for verification only */
- WAN_DUALPORT, /* for Dual Port cards */
- WAN_DISCONNECTING,
- WAN_FT1_READY /* FT1 Configurator Ready */
-};
-
-enum {
- WAN_LOCAL_IP,
- WAN_POINTOPOINT_IP,
- WAN_NETMASK_IP,
- WAN_BROADCAST_IP
-};
-
-/* 'modem_status' masks */
-#define WAN_MODEM_CTS 0x0001 /* CTS line active */
-#define WAN_MODEM_DCD 0x0002 /* DCD line active */
-#define WAN_MODEM_DTR 0x0010 /* DTR line active */
-#define WAN_MODEM_RTS 0x0020 /* RTS line active */
-
-/*----------------------------------------------------------------------------
- * WAN interface (logical channel) configuration (for ROUTER_IFNEW IOCTL).
- */
-typedef struct wanif_conf
-{
- unsigned magic; /* magic number */
- unsigned config_id; /* configuration identifier */
- char name[WAN_IFNAME_SZ+1]; /* interface name, ASCIIZ */
- char addr[WAN_ADDRESS_SZ+1]; /* media address, ASCIIZ */
- char usedby[USED_BY_FIELD]; /* used by API or WANPIPE */
- unsigned idle_timeout; /* sec, before disconnecting */
- unsigned hold_timeout; /* sec, before re-connecting */
- unsigned cir; /* Committed Information Rate fwd,bwd*/
- unsigned bc; /* Committed Burst Size fwd, bwd */
- unsigned be; /* Excess Burst Size fwd, bwd */
- unsigned char enable_IPX; /* Enable or Disable IPX */
- unsigned char inarp; /* Send Inverse ARP requests Y/N */
- unsigned inarp_interval; /* sec, between InARP requests */
- unsigned long network_number; /* Network Number for IPX */
- char mc; /* Multicast on or off */
- char local_addr[WAN_ADDRESS_SZ+1];/* local media address, ASCIIZ */
- unsigned char port; /* board port */
- unsigned char protocol; /* prococol used in this channel (TCPOX25 or X25) */
- char pap; /* PAP enabled or disabled */
- char chap; /* CHAP enabled or disabled */
- unsigned char userid[511]; /* List of User Id */
- unsigned char passwd[511]; /* List of passwords */
- unsigned char sysname[31]; /* Name of the system */
- unsigned char ignore_dcd; /* Protocol options: */
- unsigned char ignore_cts; /* Ignore these to determine */
- unsigned char ignore_keepalive; /* link status (Yes or No) */
- unsigned char hdlc_streaming; /* Hdlc streaming mode (Y/N) */
- unsigned keepalive_tx_tmr; /* transmit keepalive timer */
- unsigned keepalive_rx_tmr; /* receive keepalive timer */
- unsigned keepalive_err_margin; /* keepalive_error_tolerance */
- unsigned slarp_timer; /* SLARP request timer */
- unsigned char ttl; /* Time To Live for UDP security */
- char interface; /* RS-232/V.35, etc. */
- char clocking; /* external/internal */
- unsigned bps; /* data transfer rate */
- unsigned mtu; /* maximum transmit unit size */
- unsigned char if_down; /* brind down interface when disconnected */
- unsigned char gateway; /* Is this interface a gateway */
- unsigned char true_if_encoding; /* Set the dev->type to true board protocol */
-
- unsigned char asy_data_trans; /* async API options */
- unsigned char rts_hs_for_receive; /* async Protocol options */
- unsigned char xon_xoff_hs_for_receive;
- unsigned char xon_xoff_hs_for_transmit;
- unsigned char dcd_hs_for_transmit;
- unsigned char cts_hs_for_transmit;
- unsigned char async_mode;
- unsigned tx_bits_per_char;
- unsigned rx_bits_per_char;
- unsigned stop_bits;
- unsigned char parity;
- unsigned break_timer;
- unsigned inter_char_timer;
- unsigned rx_complete_length;
- unsigned xon_char;
- unsigned xoff_char;
- unsigned char receive_only; /* no transmit buffering (Y/N) */
-} wanif_conf_t;
-
-#ifdef __KERNEL__
/****** Kernel Interface ****************************************************/
#include <linux/fs.h> /* support for device drivers */
@@ -528,5 +126,4 @@
/* list of registered devices */
extern struct wan_device *wanrouter_router_devlist;
-#endif /* __KERNEL__ */
#endif /* _ROUTER_H */
diff --git a/include/linux/watchdog.h b/include/linux/watchdog.h
index da70f0f..b7f45d4 100644
--- a/include/linux/watchdog.h
+++ b/include/linux/watchdog.h
@@ -5,59 +5,14 @@
* by Ken Hollis <khollis@bitgate.com>
*
*/
-
#ifndef _LINUX_WATCHDOG_H
#define _LINUX_WATCHDOG_H
-#include <linux/ioctl.h>
-#include <linux/types.h>
-
-#define WATCHDOG_IOCTL_BASE 'W'
-
-struct watchdog_info {
- __u32 options; /* Options the card/driver supports */
- __u32 firmware_version; /* Firmware version of the card */
- __u8 identity[32]; /* Identity of the board */
-};
-
-#define WDIOC_GETSUPPORT _IOR(WATCHDOG_IOCTL_BASE, 0, struct watchdog_info)
-#define WDIOC_GETSTATUS _IOR(WATCHDOG_IOCTL_BASE, 1, int)
-#define WDIOC_GETBOOTSTATUS _IOR(WATCHDOG_IOCTL_BASE, 2, int)
-#define WDIOC_GETTEMP _IOR(WATCHDOG_IOCTL_BASE, 3, int)
-#define WDIOC_SETOPTIONS _IOR(WATCHDOG_IOCTL_BASE, 4, int)
-#define WDIOC_KEEPALIVE _IOR(WATCHDOG_IOCTL_BASE, 5, int)
-#define WDIOC_SETTIMEOUT _IOWR(WATCHDOG_IOCTL_BASE, 6, int)
-#define WDIOC_GETTIMEOUT _IOR(WATCHDOG_IOCTL_BASE, 7, int)
-#define WDIOC_SETPRETIMEOUT _IOWR(WATCHDOG_IOCTL_BASE, 8, int)
-#define WDIOC_GETPRETIMEOUT _IOR(WATCHDOG_IOCTL_BASE, 9, int)
-#define WDIOC_GETTIMELEFT _IOR(WATCHDOG_IOCTL_BASE, 10, int)
-
-#define WDIOF_UNKNOWN -1 /* Unknown flag error */
-#define WDIOS_UNKNOWN -1 /* Unknown status error */
-
-#define WDIOF_OVERHEAT 0x0001 /* Reset due to CPU overheat */
-#define WDIOF_FANFAULT 0x0002 /* Fan failed */
-#define WDIOF_EXTERN1 0x0004 /* External relay 1 */
-#define WDIOF_EXTERN2 0x0008 /* External relay 2 */
-#define WDIOF_POWERUNDER 0x0010 /* Power bad/power fault */
-#define WDIOF_CARDRESET 0x0020 /* Card previously reset the CPU */
-#define WDIOF_POWEROVER 0x0040 /* Power over voltage */
-#define WDIOF_SETTIMEOUT 0x0080 /* Set timeout (in seconds) */
-#define WDIOF_MAGICCLOSE 0x0100 /* Supports magic close char */
-#define WDIOF_PRETIMEOUT 0x0200 /* Pretimeout (in seconds), get/set */
-#define WDIOF_ALARMONLY 0x0400 /* Watchdog triggers a management or
- other external alarm not a reboot */
-#define WDIOF_KEEPALIVEPING 0x8000 /* Keep alive ping reply */
-
-#define WDIOS_DISABLECARD 0x0001 /* Turn off the watchdog timer */
-#define WDIOS_ENABLECARD 0x0002 /* Turn on the watchdog timer */
-#define WDIOS_TEMPPANIC 0x0004 /* Kernel panic on temperature trip */
-
-#ifdef __KERNEL__
#include <linux/bitops.h>
#include <linux/device.h>
#include <linux/cdev.h>
+#include <uapi/linux/watchdog.h>
struct watchdog_ops;
struct watchdog_device;
@@ -178,6 +133,4 @@
extern int watchdog_register_device(struct watchdog_device *);
extern void watchdog_unregister_device(struct watchdog_device *);
-#endif /* __KERNEL__ */
-
#endif /* ifndef _LINUX_WATCHDOG_H */
diff --git a/include/linux/wireless.h b/include/linux/wireless.h
index 4395b28..4ea4c6e 100644
--- a/include/linux/wireless.h
+++ b/include/linux/wireless.h
@@ -6,690 +6,11 @@
* Authors : Jean Tourrilhes - HPL - <jt@hpl.hp.com>
* Copyright (c) 1997-2007 Jean Tourrilhes, All Rights Reserved.
*/
-
#ifndef _LINUX_WIRELESS_H
#define _LINUX_WIRELESS_H
-/************************** DOCUMENTATION **************************/
-/*
- * Initial APIs (1996 -> onward) :
- * -----------------------------
- * Basically, the wireless extensions are for now a set of standard ioctl
- * call + /proc/net/wireless
- *
- * The entry /proc/net/wireless give statistics and information on the
- * driver.
- * This is better than having each driver having its entry because
- * its centralised and we may remove the driver module safely.
- *
- * Ioctl are used to configure the driver and issue commands. This is
- * better than command line options of insmod because we may want to
- * change dynamically (while the driver is running) some parameters.
- *
- * The ioctl mechanimsm are copied from standard devices ioctl.
- * We have the list of command plus a structure descibing the
- * data exchanged...
- * Note that to add these ioctl, I was obliged to modify :
- * # net/core/dev.c (two place + add include)
- * # net/ipv4/af_inet.c (one place + add include)
- *
- * /proc/net/wireless is a copy of /proc/net/dev.
- * We have a structure for data passed from the driver to /proc/net/wireless
- * Too add this, I've modified :
- * # net/core/dev.c (two other places)
- * # include/linux/netdevice.h (one place)
- * # include/linux/proc_fs.h (one place)
- *
- * New driver API (2002 -> onward) :
- * -------------------------------
- * This file is only concerned with the user space API and common definitions.
- * The new driver API is defined and documented in :
- * # include/net/iw_handler.h
- *
- * Note as well that /proc/net/wireless implementation has now moved in :
- * # net/core/wireless.c
- *
- * Wireless Events (2002 -> onward) :
- * --------------------------------
- * Events are defined at the end of this file, and implemented in :
- * # net/core/wireless.c
- *
- * Other comments :
- * --------------
- * Do not add here things that are redundant with other mechanisms
- * (drivers init, ifconfig, /proc/net/dev, ...) and with are not
- * wireless specific.
- *
- * These wireless extensions are not magic : each driver has to provide
- * support for them...
- *
- * IMPORTANT NOTE : As everything in the kernel, this is very much a
- * work in progress. Contact me if you have ideas of improvements...
- */
-
-/***************************** INCLUDES *****************************/
-
-#include <linux/types.h> /* for __u* and __s* typedefs */
-#include <linux/socket.h> /* for "struct sockaddr" et al */
-#include <linux/if.h> /* for IFNAMSIZ and co... */
-
-/***************************** VERSION *****************************/
-/*
- * This constant is used to know the availability of the wireless
- * extensions and to know which version of wireless extensions it is
- * (there is some stuff that will be added in the future...)
- * I just plan to increment with each new version.
- */
-#define WIRELESS_EXT 22
-
-/*
- * Changes :
- *
- * V2 to V3
- * --------
- * Alan Cox start some incompatibles changes. I've integrated a bit more.
- * - Encryption renamed to Encode to avoid US regulation problems
- * - Frequency changed from float to struct to avoid problems on old 386
- *
- * V3 to V4
- * --------
- * - Add sensitivity
- *
- * V4 to V5
- * --------
- * - Missing encoding definitions in range
- * - Access points stuff
- *
- * V5 to V6
- * --------
- * - 802.11 support (ESSID ioctls)
- *
- * V6 to V7
- * --------
- * - define IW_ESSID_MAX_SIZE and IW_MAX_AP
- *
- * V7 to V8
- * --------
- * - Changed my e-mail address
- * - More 802.11 support (nickname, rate, rts, frag)
- * - List index in frequencies
- *
- * V8 to V9
- * --------
- * - Support for 'mode of operation' (ad-hoc, managed...)
- * - Support for unicast and multicast power saving
- * - Change encoding to support larger tokens (>64 bits)
- * - Updated iw_params (disable, flags) and use it for NWID
- * - Extracted iw_point from iwreq for clarity
- *
- * V9 to V10
- * ---------
- * - Add PM capability to range structure
- * - Add PM modifier : MAX/MIN/RELATIVE
- * - Add encoding option : IW_ENCODE_NOKEY
- * - Add TxPower ioctls (work like TxRate)
- *
- * V10 to V11
- * ----------
- * - Add WE version in range (help backward/forward compatibility)
- * - Add retry ioctls (work like PM)
- *
- * V11 to V12
- * ----------
- * - Add SIOCSIWSTATS to get /proc/net/wireless programatically
- * - Add DEV PRIVATE IOCTL to avoid collisions in SIOCDEVPRIVATE space
- * - Add new statistics (frag, retry, beacon)
- * - Add average quality (for user space calibration)
- *
- * V12 to V13
- * ----------
- * - Document creation of new driver API.
- * - Extract union iwreq_data from struct iwreq (for new driver API).
- * - Rename SIOCSIWNAME as SIOCSIWCOMMIT
- *
- * V13 to V14
- * ----------
- * - Wireless Events support : define struct iw_event
- * - Define additional specific event numbers
- * - Add "addr" and "param" fields in union iwreq_data
- * - AP scanning stuff (SIOCSIWSCAN and friends)
- *
- * V14 to V15
- * ----------
- * - Add IW_PRIV_TYPE_ADDR for struct sockaddr private arg
- * - Make struct iw_freq signed (both m & e), add explicit padding
- * - Add IWEVCUSTOM for driver specific event/scanning token
- * - Add IW_MAX_GET_SPY for driver returning a lot of addresses
- * - Add IW_TXPOW_RANGE for range of Tx Powers
- * - Add IWEVREGISTERED & IWEVEXPIRED events for Access Points
- * - Add IW_MODE_MONITOR for passive monitor
- *
- * V15 to V16
- * ----------
- * - Increase the number of bitrates in iw_range to 32 (for 802.11g)
- * - Increase the number of frequencies in iw_range to 32 (for 802.11b+a)
- * - Reshuffle struct iw_range for increases, add filler
- * - Increase IW_MAX_AP to 64 for driver returning a lot of addresses
- * - Remove IW_MAX_GET_SPY because conflict with enhanced spy support
- * - Add SIOCSIWTHRSPY/SIOCGIWTHRSPY and "struct iw_thrspy"
- * - Add IW_ENCODE_TEMP and iw_range->encoding_login_index
- *
- * V16 to V17
- * ----------
- * - Add flags to frequency -> auto/fixed
- * - Document (struct iw_quality *)->updated, add new flags (INVALID)
- * - Wireless Event capability in struct iw_range
- * - Add support for relative TxPower (yick !)
- *
- * V17 to V18 (From Jouni Malinen <j@w1.fi>)
- * ----------
- * - Add support for WPA/WPA2
- * - Add extended encoding configuration (SIOCSIWENCODEEXT and
- * SIOCGIWENCODEEXT)
- * - Add SIOCSIWGENIE/SIOCGIWGENIE
- * - Add SIOCSIWMLME
- * - Add SIOCSIWPMKSA
- * - Add struct iw_range bit field for supported encoding capabilities
- * - Add optional scan request parameters for SIOCSIWSCAN
- * - Add SIOCSIWAUTH/SIOCGIWAUTH for setting authentication and WPA
- * related parameters (extensible up to 4096 parameter values)
- * - Add wireless events: IWEVGENIE, IWEVMICHAELMICFAILURE,
- * IWEVASSOCREQIE, IWEVASSOCRESPIE, IWEVPMKIDCAND
- *
- * V18 to V19
- * ----------
- * - Remove (struct iw_point *)->pointer from events and streams
- * - Remove header includes to help user space
- * - Increase IW_ENCODING_TOKEN_MAX from 32 to 64
- * - Add IW_QUAL_ALL_UPDATED and IW_QUAL_ALL_INVALID macros
- * - Add explicit flag to tell stats are in dBm : IW_QUAL_DBM
- * - Add IW_IOCTL_IDX() and IW_EVENT_IDX() macros
- *
- * V19 to V20
- * ----------
- * - RtNetlink requests support (SET/GET)
- *
- * V20 to V21
- * ----------
- * - Remove (struct net_device *)->get_wireless_stats()
- * - Change length in ESSID and NICK to strlen() instead of strlen()+1
- * - Add IW_RETRY_SHORT/IW_RETRY_LONG retry modifiers
- * - Power/Retry relative values no longer * 100000
- * - Add explicit flag to tell stats are in 802.11k RCPI : IW_QUAL_RCPI
- *
- * V21 to V22
- * ----------
- * - Prevent leaking of kernel space in stream on 64 bits.
- */
-
-/**************************** CONSTANTS ****************************/
-
-/* -------------------------- IOCTL LIST -------------------------- */
-
-/* Wireless Identification */
-#define SIOCSIWCOMMIT 0x8B00 /* Commit pending changes to driver */
-#define SIOCGIWNAME 0x8B01 /* get name == wireless protocol */
-/* SIOCGIWNAME is used to verify the presence of Wireless Extensions.
- * Common values : "IEEE 802.11-DS", "IEEE 802.11-FH", "IEEE 802.11b"...
- * Don't put the name of your driver there, it's useless. */
-
-/* Basic operations */
-#define SIOCSIWNWID 0x8B02 /* set network id (pre-802.11) */
-#define SIOCGIWNWID 0x8B03 /* get network id (the cell) */
-#define SIOCSIWFREQ 0x8B04 /* set channel/frequency (Hz) */
-#define SIOCGIWFREQ 0x8B05 /* get channel/frequency (Hz) */
-#define SIOCSIWMODE 0x8B06 /* set operation mode */
-#define SIOCGIWMODE 0x8B07 /* get operation mode */
-#define SIOCSIWSENS 0x8B08 /* set sensitivity (dBm) */
-#define SIOCGIWSENS 0x8B09 /* get sensitivity (dBm) */
-
-/* Informative stuff */
-#define SIOCSIWRANGE 0x8B0A /* Unused */
-#define SIOCGIWRANGE 0x8B0B /* Get range of parameters */
-#define SIOCSIWPRIV 0x8B0C /* Unused */
-#define SIOCGIWPRIV 0x8B0D /* get private ioctl interface info */
-#define SIOCSIWSTATS 0x8B0E /* Unused */
-#define SIOCGIWSTATS 0x8B0F /* Get /proc/net/wireless stats */
-/* SIOCGIWSTATS is strictly used between user space and the kernel, and
- * is never passed to the driver (i.e. the driver will never see it). */
-
-/* Spy support (statistics per MAC address - used for Mobile IP support) */
-#define SIOCSIWSPY 0x8B10 /* set spy addresses */
-#define SIOCGIWSPY 0x8B11 /* get spy info (quality of link) */
-#define SIOCSIWTHRSPY 0x8B12 /* set spy threshold (spy event) */
-#define SIOCGIWTHRSPY 0x8B13 /* get spy threshold */
-
-/* Access Point manipulation */
-#define SIOCSIWAP 0x8B14 /* set access point MAC addresses */
-#define SIOCGIWAP 0x8B15 /* get access point MAC addresses */
-#define SIOCGIWAPLIST 0x8B17 /* Deprecated in favor of scanning */
-#define SIOCSIWSCAN 0x8B18 /* trigger scanning (list cells) */
-#define SIOCGIWSCAN 0x8B19 /* get scanning results */
-
-/* 802.11 specific support */
-#define SIOCSIWESSID 0x8B1A /* set ESSID (network name) */
-#define SIOCGIWESSID 0x8B1B /* get ESSID */
-#define SIOCSIWNICKN 0x8B1C /* set node name/nickname */
-#define SIOCGIWNICKN 0x8B1D /* get node name/nickname */
-/* As the ESSID and NICKN are strings up to 32 bytes long, it doesn't fit
- * within the 'iwreq' structure, so we need to use the 'data' member to
- * point to a string in user space, like it is done for RANGE... */
-
-/* Other parameters useful in 802.11 and some other devices */
-#define SIOCSIWRATE 0x8B20 /* set default bit rate (bps) */
-#define SIOCGIWRATE 0x8B21 /* get default bit rate (bps) */
-#define SIOCSIWRTS 0x8B22 /* set RTS/CTS threshold (bytes) */
-#define SIOCGIWRTS 0x8B23 /* get RTS/CTS threshold (bytes) */
-#define SIOCSIWFRAG 0x8B24 /* set fragmentation thr (bytes) */
-#define SIOCGIWFRAG 0x8B25 /* get fragmentation thr (bytes) */
-#define SIOCSIWTXPOW 0x8B26 /* set transmit power (dBm) */
-#define SIOCGIWTXPOW 0x8B27 /* get transmit power (dBm) */
-#define SIOCSIWRETRY 0x8B28 /* set retry limits and lifetime */
-#define SIOCGIWRETRY 0x8B29 /* get retry limits and lifetime */
-
-/* Encoding stuff (scrambling, hardware security, WEP...) */
-#define SIOCSIWENCODE 0x8B2A /* set encoding token & mode */
-#define SIOCGIWENCODE 0x8B2B /* get encoding token & mode */
-/* Power saving stuff (power management, unicast and multicast) */
-#define SIOCSIWPOWER 0x8B2C /* set Power Management settings */
-#define SIOCGIWPOWER 0x8B2D /* get Power Management settings */
-
-/* WPA : Generic IEEE 802.11 informatiom element (e.g., for WPA/RSN/WMM).
- * This ioctl uses struct iw_point and data buffer that includes IE id and len
- * fields. More than one IE may be included in the request. Setting the generic
- * IE to empty buffer (len=0) removes the generic IE from the driver. Drivers
- * are allowed to generate their own WPA/RSN IEs, but in these cases, drivers
- * are required to report the used IE as a wireless event, e.g., when
- * associating with an AP. */
-#define SIOCSIWGENIE 0x8B30 /* set generic IE */
-#define SIOCGIWGENIE 0x8B31 /* get generic IE */
-
-/* WPA : IEEE 802.11 MLME requests */
-#define SIOCSIWMLME 0x8B16 /* request MLME operation; uses
- * struct iw_mlme */
-/* WPA : Authentication mode parameters */
-#define SIOCSIWAUTH 0x8B32 /* set authentication mode params */
-#define SIOCGIWAUTH 0x8B33 /* get authentication mode params */
-
-/* WPA : Extended version of encoding configuration */
-#define SIOCSIWENCODEEXT 0x8B34 /* set encoding token & mode */
-#define SIOCGIWENCODEEXT 0x8B35 /* get encoding token & mode */
-
-/* WPA2 : PMKSA cache management */
-#define SIOCSIWPMKSA 0x8B36 /* PMKSA cache operation */
-
-/* -------------------- DEV PRIVATE IOCTL LIST -------------------- */
-
-/* These 32 ioctl are wireless device private, for 16 commands.
- * Each driver is free to use them for whatever purpose it chooses,
- * however the driver *must* export the description of those ioctls
- * with SIOCGIWPRIV and *must* use arguments as defined below.
- * If you don't follow those rules, DaveM is going to hate you (reason :
- * it make mixed 32/64bit operation impossible).
- */
-#define SIOCIWFIRSTPRIV 0x8BE0
-#define SIOCIWLASTPRIV 0x8BFF
-/* Previously, we were using SIOCDEVPRIVATE, but we now have our
- * separate range because of collisions with other tools such as
- * 'mii-tool'.
- * We now have 32 commands, so a bit more space ;-).
- * Also, all 'even' commands are only usable by root and don't return the
- * content of ifr/iwr to user (but you are not obliged to use the set/get
- * convention, just use every other two command). More details in iwpriv.c.
- * And I repeat : you are not forced to use them with iwpriv, but you
- * must be compliant with it.
- */
-
-/* ------------------------- IOCTL STUFF ------------------------- */
-
-/* The first and the last (range) */
-#define SIOCIWFIRST 0x8B00
-#define SIOCIWLAST SIOCIWLASTPRIV /* 0x8BFF */
-#define IW_IOCTL_IDX(cmd) ((cmd) - SIOCIWFIRST)
-#define IW_HANDLER(id, func) \
- [IW_IOCTL_IDX(id)] = func
-
-/* Odd : get (world access), even : set (root access) */
-#define IW_IS_SET(cmd) (!((cmd) & 0x1))
-#define IW_IS_GET(cmd) ((cmd) & 0x1)
-
-/* ----------------------- WIRELESS EVENTS ----------------------- */
-/* Those are *NOT* ioctls, do not issue request on them !!! */
-/* Most events use the same identifier as ioctl requests */
-
-#define IWEVTXDROP 0x8C00 /* Packet dropped to excessive retry */
-#define IWEVQUAL 0x8C01 /* Quality part of statistics (scan) */
-#define IWEVCUSTOM 0x8C02 /* Driver specific ascii string */
-#define IWEVREGISTERED 0x8C03 /* Discovered a new node (AP mode) */
-#define IWEVEXPIRED 0x8C04 /* Expired a node (AP mode) */
-#define IWEVGENIE 0x8C05 /* Generic IE (WPA, RSN, WMM, ..)
- * (scan results); This includes id and
- * length fields. One IWEVGENIE may
- * contain more than one IE. Scan
- * results may contain one or more
- * IWEVGENIE events. */
-#define IWEVMICHAELMICFAILURE 0x8C06 /* Michael MIC failure
- * (struct iw_michaelmicfailure)
- */
-#define IWEVASSOCREQIE 0x8C07 /* IEs used in (Re)Association Request.
- * The data includes id and length
- * fields and may contain more than one
- * IE. This event is required in
- * Managed mode if the driver
- * generates its own WPA/RSN IE. This
- * should be sent just before
- * IWEVREGISTERED event for the
- * association. */
-#define IWEVASSOCRESPIE 0x8C08 /* IEs used in (Re)Association
- * Response. The data includes id and
- * length fields and may contain more
- * than one IE. This may be sent
- * between IWEVASSOCREQIE and
- * IWEVREGISTERED events for the
- * association. */
-#define IWEVPMKIDCAND 0x8C09 /* PMKID candidate for RSN
- * pre-authentication
- * (struct iw_pmkid_cand) */
-
-#define IWEVFIRST 0x8C00
-#define IW_EVENT_IDX(cmd) ((cmd) - IWEVFIRST)
-
-/* ------------------------- PRIVATE INFO ------------------------- */
-/*
- * The following is used with SIOCGIWPRIV. It allow a driver to define
- * the interface (name, type of data) for its private ioctl.
- * Privates ioctl are SIOCIWFIRSTPRIV -> SIOCIWLASTPRIV
- */
-
-#define IW_PRIV_TYPE_MASK 0x7000 /* Type of arguments */
-#define IW_PRIV_TYPE_NONE 0x0000
-#define IW_PRIV_TYPE_BYTE 0x1000 /* Char as number */
-#define IW_PRIV_TYPE_CHAR 0x2000 /* Char as character */
-#define IW_PRIV_TYPE_INT 0x4000 /* 32 bits int */
-#define IW_PRIV_TYPE_FLOAT 0x5000 /* struct iw_freq */
-#define IW_PRIV_TYPE_ADDR 0x6000 /* struct sockaddr */
-
-#define IW_PRIV_SIZE_FIXED 0x0800 /* Variable or fixed number of args */
-
-#define IW_PRIV_SIZE_MASK 0x07FF /* Max number of those args */
-
-/*
- * Note : if the number of args is fixed and the size < 16 octets,
- * instead of passing a pointer we will put args in the iwreq struct...
- */
-
-/* ----------------------- OTHER CONSTANTS ----------------------- */
-
-/* Maximum frequencies in the range struct */
-#define IW_MAX_FREQUENCIES 32
-/* Note : if you have something like 80 frequencies,
- * don't increase this constant and don't fill the frequency list.
- * The user will be able to set by channel anyway... */
-
-/* Maximum bit rates in the range struct */
-#define IW_MAX_BITRATES 32
-
-/* Maximum tx powers in the range struct */
-#define IW_MAX_TXPOWER 8
-/* Note : if you more than 8 TXPowers, just set the max and min or
- * a few of them in the struct iw_range. */
-
-/* Maximum of address that you may set with SPY */
-#define IW_MAX_SPY 8
-
-/* Maximum of address that you may get in the
- list of access points in range */
-#define IW_MAX_AP 64
-
-/* Maximum size of the ESSID and NICKN strings */
-#define IW_ESSID_MAX_SIZE 32
-
-/* Modes of operation */
-#define IW_MODE_AUTO 0 /* Let the driver decides */
-#define IW_MODE_ADHOC 1 /* Single cell network */
-#define IW_MODE_INFRA 2 /* Multi cell network, roaming, ... */
-#define IW_MODE_MASTER 3 /* Synchronisation master or Access Point */
-#define IW_MODE_REPEAT 4 /* Wireless Repeater (forwarder) */
-#define IW_MODE_SECOND 5 /* Secondary master/repeater (backup) */
-#define IW_MODE_MONITOR 6 /* Passive monitor (listen only) */
-#define IW_MODE_MESH 7 /* Mesh (IEEE 802.11s) network */
-
-/* Statistics flags (bitmask in updated) */
-#define IW_QUAL_QUAL_UPDATED 0x01 /* Value was updated since last read */
-#define IW_QUAL_LEVEL_UPDATED 0x02
-#define IW_QUAL_NOISE_UPDATED 0x04
-#define IW_QUAL_ALL_UPDATED 0x07
-#define IW_QUAL_DBM 0x08 /* Level + Noise are dBm */
-#define IW_QUAL_QUAL_INVALID 0x10 /* Driver doesn't provide value */
-#define IW_QUAL_LEVEL_INVALID 0x20
-#define IW_QUAL_NOISE_INVALID 0x40
-#define IW_QUAL_RCPI 0x80 /* Level + Noise are 802.11k RCPI */
-#define IW_QUAL_ALL_INVALID 0x70
-
-/* Frequency flags */
-#define IW_FREQ_AUTO 0x00 /* Let the driver decides */
-#define IW_FREQ_FIXED 0x01 /* Force a specific value */
-
-/* Maximum number of size of encoding token available
- * they are listed in the range structure */
-#define IW_MAX_ENCODING_SIZES 8
-
-/* Maximum size of the encoding token in bytes */
-#define IW_ENCODING_TOKEN_MAX 64 /* 512 bits (for now) */
-
-/* Flags for encoding (along with the token) */
-#define IW_ENCODE_INDEX 0x00FF /* Token index (if needed) */
-#define IW_ENCODE_FLAGS 0xFF00 /* Flags defined below */
-#define IW_ENCODE_MODE 0xF000 /* Modes defined below */
-#define IW_ENCODE_DISABLED 0x8000 /* Encoding disabled */
-#define IW_ENCODE_ENABLED 0x0000 /* Encoding enabled */
-#define IW_ENCODE_RESTRICTED 0x4000 /* Refuse non-encoded packets */
-#define IW_ENCODE_OPEN 0x2000 /* Accept non-encoded packets */
-#define IW_ENCODE_NOKEY 0x0800 /* Key is write only, so not present */
-#define IW_ENCODE_TEMP 0x0400 /* Temporary key */
-
-/* Power management flags available (along with the value, if any) */
-#define IW_POWER_ON 0x0000 /* No details... */
-#define IW_POWER_TYPE 0xF000 /* Type of parameter */
-#define IW_POWER_PERIOD 0x1000 /* Value is a period/duration of */
-#define IW_POWER_TIMEOUT 0x2000 /* Value is a timeout (to go asleep) */
-#define IW_POWER_MODE 0x0F00 /* Power Management mode */
-#define IW_POWER_UNICAST_R 0x0100 /* Receive only unicast messages */
-#define IW_POWER_MULTICAST_R 0x0200 /* Receive only multicast messages */
-#define IW_POWER_ALL_R 0x0300 /* Receive all messages though PM */
-#define IW_POWER_FORCE_S 0x0400 /* Force PM procedure for sending unicast */
-#define IW_POWER_REPEATER 0x0800 /* Repeat broadcast messages in PM period */
-#define IW_POWER_MODIFIER 0x000F /* Modify a parameter */
-#define IW_POWER_MIN 0x0001 /* Value is a minimum */
-#define IW_POWER_MAX 0x0002 /* Value is a maximum */
-#define IW_POWER_RELATIVE 0x0004 /* Value is not in seconds/ms/us */
-
-/* Transmit Power flags available */
-#define IW_TXPOW_TYPE 0x00FF /* Type of value */
-#define IW_TXPOW_DBM 0x0000 /* Value is in dBm */
-#define IW_TXPOW_MWATT 0x0001 /* Value is in mW */
-#define IW_TXPOW_RELATIVE 0x0002 /* Value is in arbitrary units */
-#define IW_TXPOW_RANGE 0x1000 /* Range of value between min/max */
-
-/* Retry limits and lifetime flags available */
-#define IW_RETRY_ON 0x0000 /* No details... */
-#define IW_RETRY_TYPE 0xF000 /* Type of parameter */
-#define IW_RETRY_LIMIT 0x1000 /* Maximum number of retries*/
-#define IW_RETRY_LIFETIME 0x2000 /* Maximum duration of retries in us */
-#define IW_RETRY_MODIFIER 0x00FF /* Modify a parameter */
-#define IW_RETRY_MIN 0x0001 /* Value is a minimum */
-#define IW_RETRY_MAX 0x0002 /* Value is a maximum */
-#define IW_RETRY_RELATIVE 0x0004 /* Value is not in seconds/ms/us */
-#define IW_RETRY_SHORT 0x0010 /* Value is for short packets */
-#define IW_RETRY_LONG 0x0020 /* Value is for long packets */
-
-/* Scanning request flags */
-#define IW_SCAN_DEFAULT 0x0000 /* Default scan of the driver */
-#define IW_SCAN_ALL_ESSID 0x0001 /* Scan all ESSIDs */
-#define IW_SCAN_THIS_ESSID 0x0002 /* Scan only this ESSID */
-#define IW_SCAN_ALL_FREQ 0x0004 /* Scan all Frequencies */
-#define IW_SCAN_THIS_FREQ 0x0008 /* Scan only this Frequency */
-#define IW_SCAN_ALL_MODE 0x0010 /* Scan all Modes */
-#define IW_SCAN_THIS_MODE 0x0020 /* Scan only this Mode */
-#define IW_SCAN_ALL_RATE 0x0040 /* Scan all Bit-Rates */
-#define IW_SCAN_THIS_RATE 0x0080 /* Scan only this Bit-Rate */
-/* struct iw_scan_req scan_type */
-#define IW_SCAN_TYPE_ACTIVE 0
-#define IW_SCAN_TYPE_PASSIVE 1
-/* Maximum size of returned data */
-#define IW_SCAN_MAX_DATA 4096 /* In bytes */
-
-/* Scan capability flags - in (struct iw_range *)->scan_capa */
-#define IW_SCAN_CAPA_NONE 0x00
-#define IW_SCAN_CAPA_ESSID 0x01
-#define IW_SCAN_CAPA_BSSID 0x02
-#define IW_SCAN_CAPA_CHANNEL 0x04
-#define IW_SCAN_CAPA_MODE 0x08
-#define IW_SCAN_CAPA_RATE 0x10
-#define IW_SCAN_CAPA_TYPE 0x20
-#define IW_SCAN_CAPA_TIME 0x40
-
-/* Max number of char in custom event - use multiple of them if needed */
-#define IW_CUSTOM_MAX 256 /* In bytes */
-
-/* Generic information element */
-#define IW_GENERIC_IE_MAX 1024
-
-/* MLME requests (SIOCSIWMLME / struct iw_mlme) */
-#define IW_MLME_DEAUTH 0
-#define IW_MLME_DISASSOC 1
-#define IW_MLME_AUTH 2
-#define IW_MLME_ASSOC 3
-
-/* SIOCSIWAUTH/SIOCGIWAUTH struct iw_param flags */
-#define IW_AUTH_INDEX 0x0FFF
-#define IW_AUTH_FLAGS 0xF000
-/* SIOCSIWAUTH/SIOCGIWAUTH parameters (0 .. 4095)
- * (IW_AUTH_INDEX mask in struct iw_param flags; this is the index of the
- * parameter that is being set/get to; value will be read/written to
- * struct iw_param value field) */
-#define IW_AUTH_WPA_VERSION 0
-#define IW_AUTH_CIPHER_PAIRWISE 1
-#define IW_AUTH_CIPHER_GROUP 2
-#define IW_AUTH_KEY_MGMT 3
-#define IW_AUTH_TKIP_COUNTERMEASURES 4
-#define IW_AUTH_DROP_UNENCRYPTED 5
-#define IW_AUTH_80211_AUTH_ALG 6
-#define IW_AUTH_WPA_ENABLED 7
-#define IW_AUTH_RX_UNENCRYPTED_EAPOL 8
-#define IW_AUTH_ROAMING_CONTROL 9
-#define IW_AUTH_PRIVACY_INVOKED 10
-#define IW_AUTH_CIPHER_GROUP_MGMT 11
-#define IW_AUTH_MFP 12
-
-/* IW_AUTH_WPA_VERSION values (bit field) */
-#define IW_AUTH_WPA_VERSION_DISABLED 0x00000001
-#define IW_AUTH_WPA_VERSION_WPA 0x00000002
-#define IW_AUTH_WPA_VERSION_WPA2 0x00000004
-
-/* IW_AUTH_PAIRWISE_CIPHER, IW_AUTH_GROUP_CIPHER, and IW_AUTH_CIPHER_GROUP_MGMT
- * values (bit field) */
-#define IW_AUTH_CIPHER_NONE 0x00000001
-#define IW_AUTH_CIPHER_WEP40 0x00000002
-#define IW_AUTH_CIPHER_TKIP 0x00000004
-#define IW_AUTH_CIPHER_CCMP 0x00000008
-#define IW_AUTH_CIPHER_WEP104 0x00000010
-#define IW_AUTH_CIPHER_AES_CMAC 0x00000020
-
-/* IW_AUTH_KEY_MGMT values (bit field) */
-#define IW_AUTH_KEY_MGMT_802_1X 1
-#define IW_AUTH_KEY_MGMT_PSK 2
-
-/* IW_AUTH_80211_AUTH_ALG values (bit field) */
-#define IW_AUTH_ALG_OPEN_SYSTEM 0x00000001
-#define IW_AUTH_ALG_SHARED_KEY 0x00000002
-#define IW_AUTH_ALG_LEAP 0x00000004
-
-/* IW_AUTH_ROAMING_CONTROL values */
-#define IW_AUTH_ROAMING_ENABLE 0 /* driver/firmware based roaming */
-#define IW_AUTH_ROAMING_DISABLE 1 /* user space program used for roaming
- * control */
-
-/* IW_AUTH_MFP (management frame protection) values */
-#define IW_AUTH_MFP_DISABLED 0 /* MFP disabled */
-#define IW_AUTH_MFP_OPTIONAL 1 /* MFP optional */
-#define IW_AUTH_MFP_REQUIRED 2 /* MFP required */
-
-/* SIOCSIWENCODEEXT definitions */
-#define IW_ENCODE_SEQ_MAX_SIZE 8
-/* struct iw_encode_ext ->alg */
-#define IW_ENCODE_ALG_NONE 0
-#define IW_ENCODE_ALG_WEP 1
-#define IW_ENCODE_ALG_TKIP 2
-#define IW_ENCODE_ALG_CCMP 3
-#define IW_ENCODE_ALG_PMK 4
-#define IW_ENCODE_ALG_AES_CMAC 5
-/* struct iw_encode_ext ->ext_flags */
-#define IW_ENCODE_EXT_TX_SEQ_VALID 0x00000001
-#define IW_ENCODE_EXT_RX_SEQ_VALID 0x00000002
-#define IW_ENCODE_EXT_GROUP_KEY 0x00000004
-#define IW_ENCODE_EXT_SET_TX_KEY 0x00000008
-
-/* IWEVMICHAELMICFAILURE : struct iw_michaelmicfailure ->flags */
-#define IW_MICFAILURE_KEY_ID 0x00000003 /* Key ID 0..3 */
-#define IW_MICFAILURE_GROUP 0x00000004
-#define IW_MICFAILURE_PAIRWISE 0x00000008
-#define IW_MICFAILURE_STAKEY 0x00000010
-#define IW_MICFAILURE_COUNT 0x00000060 /* 1 or 2 (0 = count not supported)
- */
-
-/* Bit field values for enc_capa in struct iw_range */
-#define IW_ENC_CAPA_WPA 0x00000001
-#define IW_ENC_CAPA_WPA2 0x00000002
-#define IW_ENC_CAPA_CIPHER_TKIP 0x00000004
-#define IW_ENC_CAPA_CIPHER_CCMP 0x00000008
-#define IW_ENC_CAPA_4WAY_HANDSHAKE 0x00000010
-
-/* Event capability macros - in (struct iw_range *)->event_capa
- * Because we have more than 32 possible events, we use an array of
- * 32 bit bitmasks. Note : 32 bits = 0x20 = 2^5. */
-#define IW_EVENT_CAPA_BASE(cmd) ((cmd >= SIOCIWFIRSTPRIV) ? \
- (cmd - SIOCIWFIRSTPRIV + 0x60) : \
- (cmd - SIOCIWFIRST))
-#define IW_EVENT_CAPA_INDEX(cmd) (IW_EVENT_CAPA_BASE(cmd) >> 5)
-#define IW_EVENT_CAPA_MASK(cmd) (1 << (IW_EVENT_CAPA_BASE(cmd) & 0x1F))
-/* Event capability constants - event autogenerated by the kernel
- * This list is valid for most 802.11 devices, customise as needed... */
-#define IW_EVENT_CAPA_K_0 (IW_EVENT_CAPA_MASK(0x8B04) | \
- IW_EVENT_CAPA_MASK(0x8B06) | \
- IW_EVENT_CAPA_MASK(0x8B1A))
-#define IW_EVENT_CAPA_K_1 (IW_EVENT_CAPA_MASK(0x8B2A))
-/* "Easy" macro to set events in iw_range (less efficient) */
-#define IW_EVENT_CAPA_SET(event_capa, cmd) (event_capa[IW_EVENT_CAPA_INDEX(cmd)] |= IW_EVENT_CAPA_MASK(cmd))
-#define IW_EVENT_CAPA_SET_KERNEL(event_capa) {event_capa[0] |= IW_EVENT_CAPA_K_0; event_capa[1] |= IW_EVENT_CAPA_K_1; }
-
-
-/****************************** TYPES ******************************/
-
-/* --------------------------- SUBTYPES --------------------------- */
-/*
- * Generic format for most parameters that fit in an int
- */
-struct iw_param
-{
- __s32 value; /* The value of the parameter itself */
- __u8 fixed; /* Hardware should not use auto select */
- __u8 disabled; /* Disable the feature */
- __u16 flags; /* Various specifc flags (if any) */
-};
-
-/*
- * For all data larger than 16 octets, we need to use a
- * pointer to memory allocated in user space.
- */
-struct iw_point
-{
- void __user *pointer; /* Pointer to the data (in user space) */
- __u16 length; /* number of fields or size in bytes */
- __u16 flags; /* Optional params */
-};
+#include <uapi/linux/wireless.h>
-#ifdef __KERNEL__
#ifdef CONFIG_COMPAT
#include <linux/compat.h>
@@ -700,432 +21,6 @@
__u16 flags;
};
#endif
-#endif
-
-/*
- * A frequency
- * For numbers lower than 10^9, we encode the number in 'm' and
- * set 'e' to 0
- * For number greater than 10^9, we divide it by the lowest power
- * of 10 to get 'm' lower than 10^9, with 'm'= f / (10^'e')...
- * The power of 10 is in 'e', the result of the division is in 'm'.
- */
-struct iw_freq
-{
- __s32 m; /* Mantissa */
- __s16 e; /* Exponent */
- __u8 i; /* List index (when in range struct) */
- __u8 flags; /* Flags (fixed/auto) */
-};
-
-/*
- * Quality of the link
- */
-struct iw_quality
-{
- __u8 qual; /* link quality (%retries, SNR,
- %missed beacons or better...) */
- __u8 level; /* signal level (dBm) */
- __u8 noise; /* noise level (dBm) */
- __u8 updated; /* Flags to know if updated */
-};
-
-/*
- * Packet discarded in the wireless adapter due to
- * "wireless" specific problems...
- * Note : the list of counter and statistics in net_device_stats
- * is already pretty exhaustive, and you should use that first.
- * This is only additional stats...
- */
-struct iw_discarded
-{
- __u32 nwid; /* Rx : Wrong nwid/essid */
- __u32 code; /* Rx : Unable to code/decode (WEP) */
- __u32 fragment; /* Rx : Can't perform MAC reassembly */
- __u32 retries; /* Tx : Max MAC retries num reached */
- __u32 misc; /* Others cases */
-};
-
-/*
- * Packet/Time period missed in the wireless adapter due to
- * "wireless" specific problems...
- */
-struct iw_missed
-{
- __u32 beacon; /* Missed beacons/superframe */
-};
-
-/*
- * Quality range (for spy threshold)
- */
-struct iw_thrspy
-{
- struct sockaddr addr; /* Source address (hw/mac) */
- struct iw_quality qual; /* Quality of the link */
- struct iw_quality low; /* Low threshold */
- struct iw_quality high; /* High threshold */
-};
-
-/*
- * Optional data for scan request
- *
- * Note: these optional parameters are controlling parameters for the
- * scanning behavior, these do not apply to getting scan results
- * (SIOCGIWSCAN). Drivers are expected to keep a local BSS table and
- * provide a merged results with all BSSes even if the previous scan
- * request limited scanning to a subset, e.g., by specifying an SSID.
- * Especially, scan results are required to include an entry for the
- * current BSS if the driver is in Managed mode and associated with an AP.
- */
-struct iw_scan_req
-{
- __u8 scan_type; /* IW_SCAN_TYPE_{ACTIVE,PASSIVE} */
- __u8 essid_len;
- __u8 num_channels; /* num entries in channel_list;
- * 0 = scan all allowed channels */
- __u8 flags; /* reserved as padding; use zero, this may
- * be used in the future for adding flags
- * to request different scan behavior */
- struct sockaddr bssid; /* ff:ff:ff:ff:ff:ff for broadcast BSSID or
- * individual address of a specific BSS */
-
- /*
- * Use this ESSID if IW_SCAN_THIS_ESSID flag is used instead of using
- * the current ESSID. This allows scan requests for specific ESSID
- * without having to change the current ESSID and potentially breaking
- * the current association.
- */
- __u8 essid[IW_ESSID_MAX_SIZE];
-
- /*
- * Optional parameters for changing the default scanning behavior.
- * These are based on the MLME-SCAN.request from IEEE Std 802.11.
- * TU is 1.024 ms. If these are set to 0, driver is expected to use
- * reasonable default values. min_channel_time defines the time that
- * will be used to wait for the first reply on each channel. If no
- * replies are received, next channel will be scanned after this. If
- * replies are received, total time waited on the channel is defined by
- * max_channel_time.
- */
- __u32 min_channel_time; /* in TU */
- __u32 max_channel_time; /* in TU */
-
- struct iw_freq channel_list[IW_MAX_FREQUENCIES];
-};
-
-/* ------------------------- WPA SUPPORT ------------------------- */
-
-/*
- * Extended data structure for get/set encoding (this is used with
- * SIOCSIWENCODEEXT/SIOCGIWENCODEEXT. struct iw_point and IW_ENCODE_*
- * flags are used in the same way as with SIOCSIWENCODE/SIOCGIWENCODE and
- * only the data contents changes (key data -> this structure, including
- * key data).
- *
- * If the new key is the first group key, it will be set as the default
- * TX key. Otherwise, default TX key index is only changed if
- * IW_ENCODE_EXT_SET_TX_KEY flag is set.
- *
- * Key will be changed with SIOCSIWENCODEEXT in all cases except for
- * special "change TX key index" operation which is indicated by setting
- * key_len = 0 and ext_flags |= IW_ENCODE_EXT_SET_TX_KEY.
- *
- * tx_seq/rx_seq are only used when respective
- * IW_ENCODE_EXT_{TX,RX}_SEQ_VALID flag is set in ext_flags. Normal
- * TKIP/CCMP operation is to set RX seq with SIOCSIWENCODEEXT and start
- * TX seq from zero whenever key is changed. SIOCGIWENCODEEXT is normally
- * used only by an Authenticator (AP or an IBSS station) to get the
- * current TX sequence number. Using TX_SEQ_VALID for SIOCSIWENCODEEXT and
- * RX_SEQ_VALID for SIOCGIWENCODEEXT are optional, but can be useful for
- * debugging/testing.
- */
-struct iw_encode_ext
-{
- __u32 ext_flags; /* IW_ENCODE_EXT_* */
- __u8 tx_seq[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */
- __u8 rx_seq[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */
- struct sockaddr addr; /* ff:ff:ff:ff:ff:ff for broadcast/multicast
- * (group) keys or unicast address for
- * individual keys */
- __u16 alg; /* IW_ENCODE_ALG_* */
- __u16 key_len;
- __u8 key[0];
-};
-
-/* SIOCSIWMLME data */
-struct iw_mlme
-{
- __u16 cmd; /* IW_MLME_* */
- __u16 reason_code;
- struct sockaddr addr;
-};
-
-/* SIOCSIWPMKSA data */
-#define IW_PMKSA_ADD 1
-#define IW_PMKSA_REMOVE 2
-#define IW_PMKSA_FLUSH 3
-
-#define IW_PMKID_LEN 16
-
-struct iw_pmksa
-{
- __u32 cmd; /* IW_PMKSA_* */
- struct sockaddr bssid;
- __u8 pmkid[IW_PMKID_LEN];
-};
-
-/* IWEVMICHAELMICFAILURE data */
-struct iw_michaelmicfailure
-{
- __u32 flags;
- struct sockaddr src_addr;
- __u8 tsc[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */
-};
-
-/* IWEVPMKIDCAND data */
-#define IW_PMKID_CAND_PREAUTH 0x00000001 /* RNS pre-authentication enabled */
-struct iw_pmkid_cand
-{
- __u32 flags; /* IW_PMKID_CAND_* */
- __u32 index; /* the smaller the index, the higher the
- * priority */
- struct sockaddr bssid;
-};
-
-/* ------------------------ WIRELESS STATS ------------------------ */
-/*
- * Wireless statistics (used for /proc/net/wireless)
- */
-struct iw_statistics
-{
- __u16 status; /* Status
- * - device dependent for now */
-
- struct iw_quality qual; /* Quality of the link
- * (instant/mean/max) */
- struct iw_discarded discard; /* Packet discarded counts */
- struct iw_missed miss; /* Packet missed counts */
-};
-
-/* ------------------------ IOCTL REQUEST ------------------------ */
-/*
- * This structure defines the payload of an ioctl, and is used
- * below.
- *
- * Note that this structure should fit on the memory footprint
- * of iwreq (which is the same as ifreq), which mean a max size of
- * 16 octets = 128 bits. Warning, pointers might be 64 bits wide...
- * You should check this when increasing the structures defined
- * above in this file...
- */
-union iwreq_data
-{
- /* Config - generic */
- char name[IFNAMSIZ];
- /* Name : used to verify the presence of wireless extensions.
- * Name of the protocol/provider... */
-
- struct iw_point essid; /* Extended network name */
- struct iw_param nwid; /* network id (or domain - the cell) */
- struct iw_freq freq; /* frequency or channel :
- * 0-1000 = channel
- * > 1000 = frequency in Hz */
-
- struct iw_param sens; /* signal level threshold */
- struct iw_param bitrate; /* default bit rate */
- struct iw_param txpower; /* default transmit power */
- struct iw_param rts; /* RTS threshold threshold */
- struct iw_param frag; /* Fragmentation threshold */
- __u32 mode; /* Operation mode */
- struct iw_param retry; /* Retry limits & lifetime */
-
- struct iw_point encoding; /* Encoding stuff : tokens */
- struct iw_param power; /* PM duration/timeout */
- struct iw_quality qual; /* Quality part of statistics */
-
- struct sockaddr ap_addr; /* Access point address */
- struct sockaddr addr; /* Destination address (hw/mac) */
-
- struct iw_param param; /* Other small parameters */
- struct iw_point data; /* Other large parameters */
-};
-
-/*
- * The structure to exchange data for ioctl.
- * This structure is the same as 'struct ifreq', but (re)defined for
- * convenience...
- * Do I need to remind you about structure size (32 octets) ?
- */
-struct iwreq
-{
- union
- {
- char ifrn_name[IFNAMSIZ]; /* if name, e.g. "eth0" */
- } ifr_ifrn;
-
- /* Data part (defined just above) */
- union iwreq_data u;
-};
-
-/* -------------------------- IOCTL DATA -------------------------- */
-/*
- * For those ioctl which want to exchange mode data that what could
- * fit in the above structure...
- */
-
-/*
- * Range of parameters
- */
-
-struct iw_range
-{
- /* Informative stuff (to choose between different interface) */
- __u32 throughput; /* To give an idea... */
- /* In theory this value should be the maximum benchmarked
- * TCP/IP throughput, because with most of these devices the
- * bit rate is meaningless (overhead an co) to estimate how
- * fast the connection will go and pick the fastest one.
- * I suggest people to play with Netperf or any benchmark...
- */
-
- /* NWID (or domain id) */
- __u32 min_nwid; /* Minimal NWID we are able to set */
- __u32 max_nwid; /* Maximal NWID we are able to set */
-
- /* Old Frequency (backward compat - moved lower ) */
- __u16 old_num_channels;
- __u8 old_num_frequency;
-
- /* Scan capabilities */
- __u8 scan_capa; /* IW_SCAN_CAPA_* bit field */
-
- /* Wireless event capability bitmasks */
- __u32 event_capa[6];
-
- /* signal level threshold range */
- __s32 sensitivity;
-
- /* Quality of link & SNR stuff */
- /* Quality range (link, level, noise)
- * If the quality is absolute, it will be in the range [0 ; max_qual],
- * if the quality is dBm, it will be in the range [max_qual ; 0].
- * Don't forget that we use 8 bit arithmetics... */
- struct iw_quality max_qual; /* Quality of the link */
- /* This should contain the average/typical values of the quality
- * indicator. This should be the threshold between a "good" and
- * a "bad" link (example : monitor going from green to orange).
- * Currently, user space apps like quality monitors don't have any
- * way to calibrate the measurement. With this, they can split
- * the range between 0 and max_qual in different quality level
- * (using a geometric subdivision centered on the average).
- * I expect that people doing the user space apps will feedback
- * us on which value we need to put in each driver... */
- struct iw_quality avg_qual; /* Quality of the link */
-
- /* Rates */
- __u8 num_bitrates; /* Number of entries in the list */
- __s32 bitrate[IW_MAX_BITRATES]; /* list, in bps */
-
- /* RTS threshold */
- __s32 min_rts; /* Minimal RTS threshold */
- __s32 max_rts; /* Maximal RTS threshold */
-
- /* Frag threshold */
- __s32 min_frag; /* Minimal frag threshold */
- __s32 max_frag; /* Maximal frag threshold */
-
- /* Power Management duration & timeout */
- __s32 min_pmp; /* Minimal PM period */
- __s32 max_pmp; /* Maximal PM period */
- __s32 min_pmt; /* Minimal PM timeout */
- __s32 max_pmt; /* Maximal PM timeout */
- __u16 pmp_flags; /* How to decode max/min PM period */
- __u16 pmt_flags; /* How to decode max/min PM timeout */
- __u16 pm_capa; /* What PM options are supported */
-
- /* Encoder stuff */
- __u16 encoding_size[IW_MAX_ENCODING_SIZES]; /* Different token sizes */
- __u8 num_encoding_sizes; /* Number of entry in the list */
- __u8 max_encoding_tokens; /* Max number of tokens */
- /* For drivers that need a "login/passwd" form */
- __u8 encoding_login_index; /* token index for login token */
-
- /* Transmit power */
- __u16 txpower_capa; /* What options are supported */
- __u8 num_txpower; /* Number of entries in the list */
- __s32 txpower[IW_MAX_TXPOWER]; /* list, in bps */
-
- /* Wireless Extension version info */
- __u8 we_version_compiled; /* Must be WIRELESS_EXT */
- __u8 we_version_source; /* Last update of source */
-
- /* Retry limits and lifetime */
- __u16 retry_capa; /* What retry options are supported */
- __u16 retry_flags; /* How to decode max/min retry limit */
- __u16 r_time_flags; /* How to decode max/min retry life */
- __s32 min_retry; /* Minimal number of retries */
- __s32 max_retry; /* Maximal number of retries */
- __s32 min_r_time; /* Minimal retry lifetime */
- __s32 max_r_time; /* Maximal retry lifetime */
-
- /* Frequency */
- __u16 num_channels; /* Number of channels [0; num - 1] */
- __u8 num_frequency; /* Number of entry in the list */
- struct iw_freq freq[IW_MAX_FREQUENCIES]; /* list */
- /* Note : this frequency list doesn't need to fit channel numbers,
- * because each entry contain its channel index */
-
- __u32 enc_capa; /* IW_ENC_CAPA_* bit field */
-};
-
-/*
- * Private ioctl interface information
- */
-
-struct iw_priv_args
-{
- __u32 cmd; /* Number of the ioctl to issue */
- __u16 set_args; /* Type and number of args */
- __u16 get_args; /* Type and number of args */
- char name[IFNAMSIZ]; /* Name of the extension */
-};
-
-/* ----------------------- WIRELESS EVENTS ----------------------- */
-/*
- * Wireless events are carried through the rtnetlink socket to user
- * space. They are encapsulated in the IFLA_WIRELESS field of
- * a RTM_NEWLINK message.
- */
-
-/*
- * A Wireless Event. Contains basically the same data as the ioctl...
- */
-struct iw_event
-{
- __u16 len; /* Real length of this stuff */
- __u16 cmd; /* Wireless IOCTL */
- union iwreq_data u; /* IOCTL fixed payload */
-};
-
-/* Size of the Event prefix (including padding and alignement junk) */
-#define IW_EV_LCP_LEN (sizeof(struct iw_event) - sizeof(union iwreq_data))
-/* Size of the various events */
-#define IW_EV_CHAR_LEN (IW_EV_LCP_LEN + IFNAMSIZ)
-#define IW_EV_UINT_LEN (IW_EV_LCP_LEN + sizeof(__u32))
-#define IW_EV_FREQ_LEN (IW_EV_LCP_LEN + sizeof(struct iw_freq))
-#define IW_EV_PARAM_LEN (IW_EV_LCP_LEN + sizeof(struct iw_param))
-#define IW_EV_ADDR_LEN (IW_EV_LCP_LEN + sizeof(struct sockaddr))
-#define IW_EV_QUAL_LEN (IW_EV_LCP_LEN + sizeof(struct iw_quality))
-
-/* iw_point events are special. First, the payload (extra data) come at
- * the end of the event, so they are bigger than IW_EV_POINT_LEN. Second,
- * we omit the pointer, so start at an offset. */
-#define IW_EV_POINT_OFF (((char *) &(((struct iw_point *) NULL)->length)) - \
- (char *) NULL)
-#define IW_EV_POINT_LEN (IW_EV_LCP_LEN + sizeof(struct iw_point) - \
- IW_EV_POINT_OFF)
-
-#ifdef __KERNEL__
#ifdef CONFIG_COMPAT
struct __compat_iw_event {
__u16 len; /* Real length of this stuff */
@@ -1146,17 +41,4 @@
(IW_EV_COMPAT_LCP_LEN + sizeof(struct compat_iw_point) - \
IW_EV_COMPAT_POINT_OFF)
#endif
-#endif
-
-/* Size of the Event prefix when packed in stream */
-#define IW_EV_LCP_PK_LEN (4)
-/* Size of the various events when packed in stream */
-#define IW_EV_CHAR_PK_LEN (IW_EV_LCP_PK_LEN + IFNAMSIZ)
-#define IW_EV_UINT_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(__u32))
-#define IW_EV_FREQ_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(struct iw_freq))
-#define IW_EV_PARAM_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(struct iw_param))
-#define IW_EV_ADDR_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(struct sockaddr))
-#define IW_EV_QUAL_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(struct iw_quality))
-#define IW_EV_POINT_PK_LEN (IW_EV_LCP_PK_LEN + 4)
-
#endif /* _LINUX_WIRELESS_H */
diff --git a/include/linux/xattr.h b/include/linux/xattr.h
index cc13e11..fdbafc6 100644
--- a/include/linux/xattr.h
+++ b/include/linux/xattr.h
@@ -10,61 +10,11 @@
#ifndef _LINUX_XATTR_H
#define _LINUX_XATTR_H
-#define XATTR_CREATE 0x1 /* set value, fail if attr already exists */
-#define XATTR_REPLACE 0x2 /* set value, fail if attr does not exist */
-
-/* Namespaces */
-#define XATTR_OS2_PREFIX "os2."
-#define XATTR_OS2_PREFIX_LEN (sizeof (XATTR_OS2_PREFIX) - 1)
-
-#define XATTR_SECURITY_PREFIX "security."
-#define XATTR_SECURITY_PREFIX_LEN (sizeof (XATTR_SECURITY_PREFIX) - 1)
-
-#define XATTR_SYSTEM_PREFIX "system."
-#define XATTR_SYSTEM_PREFIX_LEN (sizeof (XATTR_SYSTEM_PREFIX) - 1)
-
-#define XATTR_TRUSTED_PREFIX "trusted."
-#define XATTR_TRUSTED_PREFIX_LEN (sizeof (XATTR_TRUSTED_PREFIX) - 1)
-
-#define XATTR_USER_PREFIX "user."
-#define XATTR_USER_PREFIX_LEN (sizeof (XATTR_USER_PREFIX) - 1)
-
-/* Security namespace */
-#define XATTR_EVM_SUFFIX "evm"
-#define XATTR_NAME_EVM XATTR_SECURITY_PREFIX XATTR_EVM_SUFFIX
-
-#define XATTR_IMA_SUFFIX "ima"
-#define XATTR_NAME_IMA XATTR_SECURITY_PREFIX XATTR_IMA_SUFFIX
-
-#define XATTR_SELINUX_SUFFIX "selinux"
-#define XATTR_NAME_SELINUX XATTR_SECURITY_PREFIX XATTR_SELINUX_SUFFIX
-
-#define XATTR_SMACK_SUFFIX "SMACK64"
-#define XATTR_SMACK_IPIN "SMACK64IPIN"
-#define XATTR_SMACK_IPOUT "SMACK64IPOUT"
-#define XATTR_SMACK_EXEC "SMACK64EXEC"
-#define XATTR_SMACK_TRANSMUTE "SMACK64TRANSMUTE"
-#define XATTR_SMACK_MMAP "SMACK64MMAP"
-#define XATTR_NAME_SMACK XATTR_SECURITY_PREFIX XATTR_SMACK_SUFFIX
-#define XATTR_NAME_SMACKIPIN XATTR_SECURITY_PREFIX XATTR_SMACK_IPIN
-#define XATTR_NAME_SMACKIPOUT XATTR_SECURITY_PREFIX XATTR_SMACK_IPOUT
-#define XATTR_NAME_SMACKEXEC XATTR_SECURITY_PREFIX XATTR_SMACK_EXEC
-#define XATTR_NAME_SMACKTRANSMUTE XATTR_SECURITY_PREFIX XATTR_SMACK_TRANSMUTE
-#define XATTR_NAME_SMACKMMAP XATTR_SECURITY_PREFIX XATTR_SMACK_MMAP
-
-#define XATTR_CAPS_SUFFIX "capability"
-#define XATTR_NAME_CAPS XATTR_SECURITY_PREFIX XATTR_CAPS_SUFFIX
-
-#define XATTR_POSIX_ACL_ACCESS "posix_acl_access"
-#define XATTR_NAME_POSIX_ACL_ACCESS XATTR_SYSTEM_PREFIX XATTR_POSIX_ACL_ACCESS
-#define XATTR_POSIX_ACL_DEFAULT "posix_acl_default"
-#define XATTR_NAME_POSIX_ACL_DEFAULT XATTR_SYSTEM_PREFIX XATTR_POSIX_ACL_DEFAULT
-
-#ifdef __KERNEL__
#include <linux/slab.h>
#include <linux/types.h>
#include <linux/spinlock.h>
+#include <uapi/linux/xattr.h>
struct inode;
struct dentry;
@@ -147,6 +97,4 @@
void simple_xattr_list_add(struct simple_xattrs *xattrs,
struct simple_xattr *new_xattr);
-#endif /* __KERNEL__ */
-
#endif /* _LINUX_XATTR_H */
diff --git a/include/uapi/linux/Kbuild b/include/uapi/linux/Kbuild
index b0fd4d0..e194387 100644
--- a/include/uapi/linux/Kbuild
+++ b/include/uapi/linux/Kbuild
@@ -22,3 +22,396 @@
header-y += wimax/
genhdr-y += version.h
+
+ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/uapi/asm/a.out.h \
+ $(srctree)/arch/$(SRCARCH)/include/asm/a.out.h),)
+header-y += a.out.h
+endif
+
+header-y += acct.h
+header-y += adb.h
+header-y += adfs_fs.h
+header-y += affs_hardblocks.h
+header-y += agpgart.h
+header-y += aio_abi.h
+header-y += apm_bios.h
+header-y += arcfb.h
+header-y += atalk.h
+header-y += atm.h
+header-y += atm_eni.h
+header-y += atm_he.h
+header-y += atm_idt77105.h
+header-y += atm_nicstar.h
+header-y += atm_tcp.h
+header-y += atm_zatm.h
+header-y += atmapi.h
+header-y += atmarp.h
+header-y += atmbr2684.h
+header-y += atmclip.h
+header-y += atmdev.h
+header-y += atmioc.h
+header-y += atmlec.h
+header-y += atmmpc.h
+header-y += atmppp.h
+header-y += atmsap.h
+header-y += atmsvc.h
+header-y += audit.h
+header-y += auto_fs.h
+header-y += auto_fs4.h
+header-y += auxvec.h
+header-y += ax25.h
+header-y += b1lli.h
+header-y += baycom.h
+header-y += bfs_fs.h
+header-y += binfmts.h
+header-y += blkpg.h
+header-y += blktrace_api.h
+header-y += bpqether.h
+header-y += bsg.h
+header-y += can.h
+header-y += capability.h
+header-y += capi.h
+header-y += cciss_defs.h
+header-y += cciss_ioctl.h
+header-y += cdrom.h
+header-y += cgroupstats.h
+header-y += chio.h
+header-y += cm4000_cs.h
+header-y += cn_proc.h
+header-y += coda.h
+header-y += coda_psdev.h
+header-y += coff.h
+header-y += connector.h
+header-y += const.h
+header-y += cramfs_fs.h
+header-y += cuda.h
+header-y += cyclades.h
+header-y += cycx_cfm.h
+header-y += dcbnl.h
+header-y += dccp.h
+header-y += dlm.h
+header-y += dlm_device.h
+header-y += dlm_netlink.h
+header-y += dlm_plock.h
+header-y += dlmconstants.h
+header-y += dm-ioctl.h
+header-y += dm-log-userspace.h
+header-y += dn.h
+header-y += dqblk_xfs.h
+header-y += edd.h
+header-y += efs_fs_sb.h
+header-y += elf-em.h
+header-y += elf-fdpic.h
+header-y += elf.h
+header-y += elfcore.h
+header-y += errno.h
+header-y += errqueue.h
+header-y += ethtool.h
+header-y += eventpoll.h
+header-y += fadvise.h
+header-y += falloc.h
+header-y += fanotify.h
+header-y += fb.h
+header-y += fcntl.h
+header-y += fd.h
+header-y += fdreg.h
+header-y += fib_rules.h
+header-y += fiemap.h
+header-y += filter.h
+header-y += firewire-cdev.h
+header-y += firewire-constants.h
+header-y += flat.h
+header-y += fs.h
+header-y += fsl_hypervisor.h
+header-y += fuse.h
+header-y += futex.h
+header-y += gameport.h
+header-y += gen_stats.h
+header-y += genetlink.h
+header-y += gfs2_ondisk.h
+header-y += gigaset_dev.h
+header-y += hdlc.h
+header-y += hdlcdrv.h
+header-y += hdreg.h
+header-y += hid.h
+header-y += hiddev.h
+header-y += hidraw.h
+header-y += hpet.h
+header-y += hysdn_if.h
+header-y += i2c-dev.h
+header-y += i2c.h
+header-y += i2o-dev.h
+header-y += i8k.h
+header-y += icmp.h
+header-y += icmpv6.h
+header-y += if.h
+header-y += if_addr.h
+header-y += if_addrlabel.h
+header-y += if_alg.h
+header-y += if_arcnet.h
+header-y += if_arp.h
+header-y += if_bonding.h
+header-y += if_bridge.h
+header-y += if_cablemodem.h
+header-y += if_eql.h
+header-y += if_ether.h
+header-y += if_fc.h
+header-y += if_fddi.h
+header-y += if_frad.h
+header-y += if_hippi.h
+header-y += if_infiniband.h
+header-y += if_link.h
+header-y += if_ltalk.h
+header-y += if_packet.h
+header-y += if_phonet.h
+header-y += if_plip.h
+header-y += if_ppp.h
+header-y += if_pppol2tp.h
+header-y += if_pppox.h
+header-y += if_slip.h
+header-y += if_team.h
+header-y += if_tun.h
+header-y += if_tunnel.h
+header-y += if_vlan.h
+header-y += if_x25.h
+header-y += igmp.h
+header-y += in.h
+header-y += in6.h
+header-y += in_route.h
+header-y += inet_diag.h
+header-y += inotify.h
+header-y += input.h
+header-y += ioctl.h
+header-y += ip.h
+header-y += ip6_tunnel.h
+header-y += ip_vs.h
+header-y += ipc.h
+header-y += ipmi.h
+header-y += ipmi_msgdefs.h
+header-y += ipsec.h
+header-y += ipv6.h
+header-y += ipv6_route.h
+header-y += ipx.h
+header-y += irda.h
+header-y += irqnr.h
+header-y += isdn.h
+header-y += isdn_divertif.h
+header-y += isdn_ppp.h
+header-y += isdnif.h
+header-y += iso_fs.h
+header-y += ivtv.h
+header-y += ivtvfb.h
+header-y += ixjuser.h
+header-y += jffs2.h
+header-y += joystick.h
+header-y += kd.h
+header-y += kdev_t.h
+header-y += kernel-page-flags.h
+header-y += kernel.h
+header-y += kernelcapi.h
+header-y += kexec.h
+header-y += keyboard.h
+header-y += keyctl.h
+
+ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/uapi/asm/kvm.h \
+ $(srctree)/arch/$(SRCARCH)/include/asm/kvm.h),)
+header-y += kvm.h
+endif
+
+
+ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/uapi/asm/kvm_para.h \
+ $(srctree)/arch/$(SRCARCH)/include/asm/kvm_para.h),)
+header-y += kvm_para.h
+endif
+
+header-y += l2tp.h
+header-y += limits.h
+header-y += llc.h
+header-y += loop.h
+header-y += lp.h
+header-y += magic.h
+header-y += major.h
+header-y += map_to_7segment.h
+header-y += matroxfb.h
+header-y += mdio.h
+header-y += media.h
+header-y += mei.h
+header-y += mempolicy.h
+header-y += meye.h
+header-y += mii.h
+header-y += minix_fs.h
+header-y += mman.h
+header-y += mmtimer.h
+header-y += mqueue.h
+header-y += mroute.h
+header-y += mroute6.h
+header-y += msdos_fs.h
+header-y += msg.h
+header-y += mtio.h
+header-y += n_r3964.h
+header-y += nbd.h
+header-y += ncp.h
+header-y += ncp_fs.h
+header-y += ncp_mount.h
+header-y += ncp_no.h
+header-y += neighbour.h
+header-y += net.h
+header-y += net_dropmon.h
+header-y += net_tstamp.h
+header-y += netdevice.h
+header-y += netfilter.h
+header-y += netfilter_arp.h
+header-y += netfilter_bridge.h
+header-y += netfilter_decnet.h
+header-y += netfilter_ipv4.h
+header-y += netfilter_ipv6.h
+header-y += netlink.h
+header-y += netrom.h
+header-y += nfc.h
+header-y += nfs.h
+header-y += nfs2.h
+header-y += nfs3.h
+header-y += nfs4.h
+header-y += nfs4_mount.h
+header-y += nfs_fs.h
+header-y += nfs_idmap.h
+header-y += nfs_mount.h
+header-y += nfsacl.h
+header-y += nl80211.h
+header-y += nubus.h
+header-y += nvram.h
+header-y += omap3isp.h
+header-y += omapfb.h
+header-y += oom.h
+header-y += packet_diag.h
+header-y += param.h
+header-y += parport.h
+header-y += patchkey.h
+header-y += pci.h
+header-y += pci_regs.h
+header-y += perf_event.h
+header-y += personality.h
+header-y += pfkeyv2.h
+header-y += pg.h
+header-y += phantom.h
+header-y += phonet.h
+header-y += pkt_cls.h
+header-y += pkt_sched.h
+header-y += pktcdvd.h
+header-y += pmu.h
+header-y += poll.h
+header-y += posix_types.h
+header-y += ppdev.h
+header-y += ppp-comp.h
+header-y += ppp-ioctl.h
+header-y += ppp_defs.h
+header-y += pps.h
+header-y += prctl.h
+header-y += ptp_clock.h
+header-y += ptrace.h
+header-y += qnx4_fs.h
+header-y += qnxtypes.h
+header-y += quota.h
+header-y += radeonfb.h
+header-y += random.h
+header-y += raw.h
+header-y += rds.h
+header-y += reboot.h
+header-y += reiserfs_fs.h
+header-y += reiserfs_xattr.h
+header-y += resource.h
+header-y += rfkill.h
+header-y += romfs_fs.h
+header-y += rose.h
+header-y += route.h
+header-y += rtc.h
+header-y += rtnetlink.h
+header-y += scc.h
+header-y += sched.h
+header-y += screen_info.h
+header-y += sdla.h
+header-y += seccomp.h
+header-y += securebits.h
+header-y += selinux_netlink.h
+header-y += sem.h
+header-y += serial.h
+header-y += serial_core.h
+header-y += serial_reg.h
+header-y += serio.h
+header-y += shm.h
+header-y += signal.h
+header-y += signalfd.h
+header-y += snmp.h
+header-y += sock_diag.h
+header-y += socket.h
+header-y += sockios.h
+header-y += som.h
+header-y += sonet.h
+header-y += sonypi.h
+header-y += sound.h
+header-y += soundcard.h
+header-y += stat.h
+header-y += stddef.h
+header-y += string.h
+header-y += suspend_ioctls.h
+header-y += swab.h
+header-y += synclink.h
+header-y += sysctl.h
+header-y += sysinfo.h
+header-y += taskstats.h
+header-y += tcp.h
+header-y += tcp_metrics.h
+header-y += telephony.h
+header-y += termios.h
+header-y += time.h
+header-y += times.h
+header-y += timex.h
+header-y += tiocl.h
+header-y += tipc.h
+header-y += tipc_config.h
+header-y += toshiba.h
+header-y += tty.h
+header-y += tty_flags.h
+header-y += types.h
+header-y += udf_fs_i.h
+header-y += udp.h
+header-y += uhid.h
+header-y += uinput.h
+header-y += uio.h
+header-y += ultrasound.h
+header-y += un.h
+header-y += unistd.h
+header-y += unix_diag.h
+header-y += usbdevice_fs.h
+header-y += utime.h
+header-y += utsname.h
+header-y += uuid.h
+header-y += uvcvideo.h
+header-y += v4l2-common.h
+header-y += v4l2-controls.h
+header-y += v4l2-dv-timings.h
+header-y += v4l2-mediabus.h
+header-y += v4l2-subdev.h
+header-y += veth.h
+header-y += vfio.h
+header-y += vhost.h
+header-y += videodev2.h
+header-y += virtio_9p.h
+header-y += virtio_balloon.h
+header-y += virtio_blk.h
+header-y += virtio_config.h
+header-y += virtio_console.h
+header-y += virtio_ids.h
+header-y += virtio_net.h
+header-y += virtio_pci.h
+header-y += virtio_ring.h
+header-y += virtio_rng.h
+header-y += vt.h
+header-y += wait.h
+header-y += wanrouter.h
+header-y += watchdog.h
+header-y += wimax.h
+header-y += wireless.h
+header-y += x25.h
+header-y += xattr.h
+header-y += xfrm.h
diff --git a/include/uapi/linux/a.out.h b/include/uapi/linux/a.out.h
new file mode 100644
index 0000000..7caf44c
--- /dev/null
+++ b/include/uapi/linux/a.out.h
@@ -0,0 +1,274 @@
+#ifndef _UAPI__A_OUT_GNU_H__
+#define _UAPI__A_OUT_GNU_H__
+
+#define __GNU_EXEC_MACROS__
+
+#ifndef __STRUCT_EXEC_OVERRIDE__
+
+#include <asm/a.out.h>
+
+#endif /* __STRUCT_EXEC_OVERRIDE__ */
+
+#ifndef __ASSEMBLY__
+
+/* these go in the N_MACHTYPE field */
+enum machine_type {
+#if defined (M_OLDSUN2)
+ M__OLDSUN2 = M_OLDSUN2,
+#else
+ M_OLDSUN2 = 0,
+#endif
+#if defined (M_68010)
+ M__68010 = M_68010,
+#else
+ M_68010 = 1,
+#endif
+#if defined (M_68020)
+ M__68020 = M_68020,
+#else
+ M_68020 = 2,
+#endif
+#if defined (M_SPARC)
+ M__SPARC = M_SPARC,
+#else
+ M_SPARC = 3,
+#endif
+ /* skip a bunch so we don't run into any of sun's numbers */
+ M_386 = 100,
+ M_MIPS1 = 151, /* MIPS R3000/R3000 binary */
+ M_MIPS2 = 152 /* MIPS R6000/R4000 binary */
+};
+
+#if !defined (N_MAGIC)
+#define N_MAGIC(exec) ((exec).a_info & 0xffff)
+#endif
+#define N_MACHTYPE(exec) ((enum machine_type)(((exec).a_info >> 16) & 0xff))
+#define N_FLAGS(exec) (((exec).a_info >> 24) & 0xff)
+#define N_SET_INFO(exec, magic, type, flags) \
+ ((exec).a_info = ((magic) & 0xffff) \
+ | (((int)(type) & 0xff) << 16) \
+ | (((flags) & 0xff) << 24))
+#define N_SET_MAGIC(exec, magic) \
+ ((exec).a_info = (((exec).a_info & 0xffff0000) | ((magic) & 0xffff)))
+
+#define N_SET_MACHTYPE(exec, machtype) \
+ ((exec).a_info = \
+ ((exec).a_info&0xff00ffff) | ((((int)(machtype))&0xff) << 16))
+
+#define N_SET_FLAGS(exec, flags) \
+ ((exec).a_info = \
+ ((exec).a_info&0x00ffffff) | (((flags) & 0xff) << 24))
+
+/* Code indicating object file or impure executable. */
+#define OMAGIC 0407
+/* Code indicating pure executable. */
+#define NMAGIC 0410
+/* Code indicating demand-paged executable. */
+#define ZMAGIC 0413
+/* This indicates a demand-paged executable with the header in the text.
+ The first page is unmapped to help trap NULL pointer references */
+#define QMAGIC 0314
+
+/* Code indicating core file. */
+#define CMAGIC 0421
+
+#if !defined (N_BADMAG)
+#define N_BADMAG(x) (N_MAGIC(x) != OMAGIC \
+ && N_MAGIC(x) != NMAGIC \
+ && N_MAGIC(x) != ZMAGIC \
+ && N_MAGIC(x) != QMAGIC)
+#endif
+
+#define _N_HDROFF(x) (1024 - sizeof (struct exec))
+
+#if !defined (N_TXTOFF)
+#define N_TXTOFF(x) \
+ (N_MAGIC(x) == ZMAGIC ? _N_HDROFF((x)) + sizeof (struct exec) : \
+ (N_MAGIC(x) == QMAGIC ? 0 : sizeof (struct exec)))
+#endif
+
+#if !defined (N_DATOFF)
+#define N_DATOFF(x) (N_TXTOFF(x) + (x).a_text)
+#endif
+
+#if !defined (N_TRELOFF)
+#define N_TRELOFF(x) (N_DATOFF(x) + (x).a_data)
+#endif
+
+#if !defined (N_DRELOFF)
+#define N_DRELOFF(x) (N_TRELOFF(x) + N_TRSIZE(x))
+#endif
+
+#if !defined (N_SYMOFF)
+#define N_SYMOFF(x) (N_DRELOFF(x) + N_DRSIZE(x))
+#endif
+
+#if !defined (N_STROFF)
+#define N_STROFF(x) (N_SYMOFF(x) + N_SYMSIZE(x))
+#endif
+
+/* Address of text segment in memory after it is loaded. */
+#if !defined (N_TXTADDR)
+#define N_TXTADDR(x) (N_MAGIC(x) == QMAGIC ? PAGE_SIZE : 0)
+#endif
+
+/* Address of data segment in memory after it is loaded.
+ Note that it is up to you to define SEGMENT_SIZE
+ on machines not listed here. */
+#if defined(vax) || defined(hp300) || defined(pyr)
+#define SEGMENT_SIZE page_size
+#endif
+#ifdef sony
+#define SEGMENT_SIZE 0x2000
+#endif /* Sony. */
+#ifdef is68k
+#define SEGMENT_SIZE 0x20000
+#endif
+#if defined(m68k) && defined(PORTAR)
+#define PAGE_SIZE 0x400
+#define SEGMENT_SIZE PAGE_SIZE
+#endif
+
+#ifdef linux
+#ifndef __KERNEL__
+#include <unistd.h>
+#endif
+#if defined(__i386__) || defined(__mc68000__)
+#define SEGMENT_SIZE 1024
+#else
+#ifndef SEGMENT_SIZE
+#ifndef __KERNEL__
+#define SEGMENT_SIZE getpagesize()
+#endif
+#endif
+#endif
+#endif
+
+#define _N_SEGMENT_ROUND(x) ALIGN(x, SEGMENT_SIZE)
+
+#define _N_TXTENDADDR(x) (N_TXTADDR(x)+(x).a_text)
+
+#ifndef N_DATADDR
+#define N_DATADDR(x) \
+ (N_MAGIC(x)==OMAGIC? (_N_TXTENDADDR(x)) \
+ : (_N_SEGMENT_ROUND (_N_TXTENDADDR(x))))
+#endif
+
+/* Address of bss segment in memory after it is loaded. */
+#if !defined (N_BSSADDR)
+#define N_BSSADDR(x) (N_DATADDR(x) + (x).a_data)
+#endif
+
+#if !defined (N_NLIST_DECLARED)
+struct nlist {
+ union {
+ char *n_name;
+ struct nlist *n_next;
+ long n_strx;
+ } n_un;
+ unsigned char n_type;
+ char n_other;
+ short n_desc;
+ unsigned long n_value;
+};
+#endif /* no N_NLIST_DECLARED. */
+
+#if !defined (N_UNDF)
+#define N_UNDF 0
+#endif
+#if !defined (N_ABS)
+#define N_ABS 2
+#endif
+#if !defined (N_TEXT)
+#define N_TEXT 4
+#endif
+#if !defined (N_DATA)
+#define N_DATA 6
+#endif
+#if !defined (N_BSS)
+#define N_BSS 8
+#endif
+#if !defined (N_FN)
+#define N_FN 15
+#endif
+
+#if !defined (N_EXT)
+#define N_EXT 1
+#endif
+#if !defined (N_TYPE)
+#define N_TYPE 036
+#endif
+#if !defined (N_STAB)
+#define N_STAB 0340
+#endif
+
+/* The following type indicates the definition of a symbol as being
+ an indirect reference to another symbol. The other symbol
+ appears as an undefined reference, immediately following this symbol.
+
+ Indirection is asymmetrical. The other symbol's value will be used
+ to satisfy requests for the indirect symbol, but not vice versa.
+ If the other symbol does not have a definition, libraries will
+ be searched to find a definition. */
+#define N_INDR 0xa
+
+/* The following symbols refer to set elements.
+ All the N_SET[ATDB] symbols with the same name form one set.
+ Space is allocated for the set in the text section, and each set
+ element's value is stored into one word of the space.
+ The first word of the space is the length of the set (number of elements).
+
+ The address of the set is made into an N_SETV symbol
+ whose name is the same as the name of the set.
+ This symbol acts like a N_DATA global symbol
+ in that it can satisfy undefined external references. */
+
+/* These appear as input to LD, in a .o file. */
+#define N_SETA 0x14 /* Absolute set element symbol */
+#define N_SETT 0x16 /* Text set element symbol */
+#define N_SETD 0x18 /* Data set element symbol */
+#define N_SETB 0x1A /* Bss set element symbol */
+
+/* This is output from LD. */
+#define N_SETV 0x1C /* Pointer to set vector in data area. */
+
+#if !defined (N_RELOCATION_INFO_DECLARED)
+/* This structure describes a single relocation to be performed.
+ The text-relocation section of the file is a vector of these structures,
+ all of which apply to the text section.
+ Likewise, the data-relocation section applies to the data section. */
+
+struct relocation_info
+{
+ /* Address (within segment) to be relocated. */
+ int r_address;
+ /* The meaning of r_symbolnum depends on r_extern. */
+ unsigned int r_symbolnum:24;
+ /* Nonzero means value is a pc-relative offset
+ and it should be relocated for changes in its own address
+ as well as for changes in the symbol or section specified. */
+ unsigned int r_pcrel:1;
+ /* Length (as exponent of 2) of the field to be relocated.
+ Thus, a value of 2 indicates 1<<2 bytes. */
+ unsigned int r_length:2;
+ /* 1 => relocate with value of symbol.
+ r_symbolnum is the index of the symbol
+ in file's the symbol table.
+ 0 => relocate with the address of a segment.
+ r_symbolnum is N_TEXT, N_DATA, N_BSS or N_ABS
+ (the N_EXT bit may be set also, but signifies nothing). */
+ unsigned int r_extern:1;
+ /* Four bits that aren't used, but when writing an object file
+ it is desirable to clear them. */
+#ifdef NS32K
+ unsigned r_bsr:1;
+ unsigned r_disp:1;
+ unsigned r_pad:2;
+#else
+ unsigned int r_pad:4;
+#endif
+};
+#endif /* no N_RELOCATION_INFO_DECLARED. */
+
+#endif /*__ASSEMBLY__ */
+#endif /* _UAPI__A_OUT_GNU_H__ */
diff --git a/include/uapi/linux/acct.h b/include/uapi/linux/acct.h
new file mode 100644
index 0000000..11b6ca3
--- /dev/null
+++ b/include/uapi/linux/acct.h
@@ -0,0 +1,122 @@
+/*
+ * BSD Process Accounting for Linux - Definitions
+ *
+ * Author: Marco van Wieringen (mvw@planets.elm.net)
+ *
+ * This header file contains the definitions needed to implement
+ * BSD-style process accounting. The kernel accounting code and all
+ * user-level programs that try to do something useful with the
+ * process accounting log must include this file.
+ *
+ * Copyright (C) 1995 - 1997 Marco van Wieringen - ELM Consultancy B.V.
+ *
+ */
+
+#ifndef _UAPI_LINUX_ACCT_H
+#define _UAPI_LINUX_ACCT_H
+
+#include <linux/types.h>
+
+#include <asm/param.h>
+#include <asm/byteorder.h>
+
+/*
+ * comp_t is a 16-bit "floating" point number with a 3-bit base 8
+ * exponent and a 13-bit fraction.
+ * comp2_t is 24-bit with 5-bit base 2 exponent and 20 bit fraction
+ * (leading 1 not stored).
+ * See linux/kernel/acct.c for the specific encoding systems used.
+ */
+
+typedef __u16 comp_t;
+typedef __u32 comp2_t;
+
+/*
+ * accounting file record
+ *
+ * This structure contains all of the information written out to the
+ * process accounting file whenever a process exits.
+ */
+
+#define ACCT_COMM 16
+
+struct acct
+{
+ char ac_flag; /* Flags */
+ char ac_version; /* Always set to ACCT_VERSION */
+ /* for binary compatibility back until 2.0 */
+ __u16 ac_uid16; /* LSB of Real User ID */
+ __u16 ac_gid16; /* LSB of Real Group ID */
+ __u16 ac_tty; /* Control Terminal */
+ __u32 ac_btime; /* Process Creation Time */
+ comp_t ac_utime; /* User Time */
+ comp_t ac_stime; /* System Time */
+ comp_t ac_etime; /* Elapsed Time */
+ comp_t ac_mem; /* Average Memory Usage */
+ comp_t ac_io; /* Chars Transferred */
+ comp_t ac_rw; /* Blocks Read or Written */
+ comp_t ac_minflt; /* Minor Pagefaults */
+ comp_t ac_majflt; /* Major Pagefaults */
+ comp_t ac_swaps; /* Number of Swaps */
+/* m68k had no padding here. */
+#if !defined(CONFIG_M68K) || !defined(__KERNEL__)
+ __u16 ac_ahz; /* AHZ */
+#endif
+ __u32 ac_exitcode; /* Exitcode */
+ char ac_comm[ACCT_COMM + 1]; /* Command Name */
+ __u8 ac_etime_hi; /* Elapsed Time MSB */
+ __u16 ac_etime_lo; /* Elapsed Time LSB */
+ __u32 ac_uid; /* Real User ID */
+ __u32 ac_gid; /* Real Group ID */
+};
+
+struct acct_v3
+{
+ char ac_flag; /* Flags */
+ char ac_version; /* Always set to ACCT_VERSION */
+ __u16 ac_tty; /* Control Terminal */
+ __u32 ac_exitcode; /* Exitcode */
+ __u32 ac_uid; /* Real User ID */
+ __u32 ac_gid; /* Real Group ID */
+ __u32 ac_pid; /* Process ID */
+ __u32 ac_ppid; /* Parent Process ID */
+ __u32 ac_btime; /* Process Creation Time */
+#ifdef __KERNEL__
+ __u32 ac_etime; /* Elapsed Time */
+#else
+ float ac_etime; /* Elapsed Time */
+#endif
+ comp_t ac_utime; /* User Time */
+ comp_t ac_stime; /* System Time */
+ comp_t ac_mem; /* Average Memory Usage */
+ comp_t ac_io; /* Chars Transferred */
+ comp_t ac_rw; /* Blocks Read or Written */
+ comp_t ac_minflt; /* Minor Pagefaults */
+ comp_t ac_majflt; /* Major Pagefaults */
+ comp_t ac_swaps; /* Number of Swaps */
+ char ac_comm[ACCT_COMM]; /* Command Name */
+};
+
+/*
+ * accounting flags
+ */
+ /* bit set when the process ... */
+#define AFORK 0x01 /* ... executed fork, but did not exec */
+#define ASU 0x02 /* ... used super-user privileges */
+#define ACOMPAT 0x04 /* ... used compatibility mode (VAX only not used) */
+#define ACORE 0x08 /* ... dumped core */
+#define AXSIG 0x10 /* ... was killed by a signal */
+
+#ifdef __BIG_ENDIAN
+#define ACCT_BYTEORDER 0x80 /* accounting file is big endian */
+#else
+#define ACCT_BYTEORDER 0x00 /* accounting file is little endian */
+#endif
+
+#ifndef __KERNEL__
+#define ACCT_VERSION 2
+#define AHZ (HZ)
+#endif /* __KERNEL */
+
+
+#endif /* _UAPI_LINUX_ACCT_H */
diff --git a/include/uapi/linux/adb.h b/include/uapi/linux/adb.h
new file mode 100644
index 0000000..0ea1075
--- /dev/null
+++ b/include/uapi/linux/adb.h
@@ -0,0 +1,44 @@
+/*
+ * Definitions for ADB (Apple Desktop Bus) support.
+ */
+#ifndef _UAPI__ADB_H
+#define _UAPI__ADB_H
+
+/* ADB commands */
+#define ADB_BUSRESET 0
+#define ADB_FLUSH(id) (0x01 | ((id) << 4))
+#define ADB_WRITEREG(id, reg) (0x08 | (reg) | ((id) << 4))
+#define ADB_READREG(id, reg) (0x0C | (reg) | ((id) << 4))
+
+/* ADB default device IDs (upper 4 bits of ADB command byte) */
+#define ADB_DONGLE 1 /* "software execution control" devices */
+#define ADB_KEYBOARD 2
+#define ADB_MOUSE 3
+#define ADB_TABLET 4
+#define ADB_MODEM 5
+#define ADB_MISC 7 /* maybe a monitor */
+
+#define ADB_RET_OK 0
+#define ADB_RET_TIMEOUT 3
+
+/* The kind of ADB request. The controller may emulate some
+ or all of those CUDA/PMU packet kinds */
+#define ADB_PACKET 0
+#define CUDA_PACKET 1
+#define ERROR_PACKET 2
+#define TIMER_PACKET 3
+#define POWER_PACKET 4
+#define MACIIC_PACKET 5
+#define PMU_PACKET 6
+#define ADB_QUERY 7
+
+/* ADB queries */
+
+/* ADB_QUERY_GETDEVINFO
+ * Query ADB slot for device presence
+ * data[2] = id, rep[0] = orig addr, rep[1] = handler_id
+ */
+#define ADB_QUERY_GETDEVINFO 1
+
+
+#endif /* _UAPI__ADB_H */
diff --git a/include/uapi/linux/adfs_fs.h b/include/uapi/linux/adfs_fs.h
new file mode 100644
index 0000000..a1bf437
--- /dev/null
+++ b/include/uapi/linux/adfs_fs.h
@@ -0,0 +1,44 @@
+#ifndef _UAPI_ADFS_FS_H
+#define _UAPI_ADFS_FS_H
+
+#include <linux/types.h>
+#include <linux/magic.h>
+
+/*
+ * Disc Record at disc address 0xc00
+ */
+struct adfs_discrecord {
+ __u8 log2secsize;
+ __u8 secspertrack;
+ __u8 heads;
+ __u8 density;
+ __u8 idlen;
+ __u8 log2bpmb;
+ __u8 skew;
+ __u8 bootoption;
+ __u8 lowsector;
+ __u8 nzones;
+ __le16 zone_spare;
+ __le32 root;
+ __le32 disc_size;
+ __le16 disc_id;
+ __u8 disc_name[10];
+ __le32 disc_type;
+ __le32 disc_size_high;
+ __u8 log2sharesize:4;
+ __u8 unused40:4;
+ __u8 big_flag:1;
+ __u8 unused41:1;
+ __u8 nzones_high;
+ __le32 format_version;
+ __le32 root_size;
+ __u8 unused52[60 - 52];
+};
+
+#define ADFS_DISCRECORD (0xc00)
+#define ADFS_DR_OFFSET (0x1c0)
+#define ADFS_DR_SIZE 60
+#define ADFS_DR_SIZE_BITS (ADFS_DR_SIZE << 3)
+
+
+#endif /* _UAPI_ADFS_FS_H */
diff --git a/include/linux/affs_hardblocks.h b/include/uapi/linux/affs_hardblocks.h
similarity index 100%
rename from include/linux/affs_hardblocks.h
rename to include/uapi/linux/affs_hardblocks.h
diff --git a/include/uapi/linux/agpgart.h b/include/uapi/linux/agpgart.h
new file mode 100644
index 0000000..4e828cf
--- /dev/null
+++ b/include/uapi/linux/agpgart.h
@@ -0,0 +1,113 @@
+/*
+ * AGPGART module version 0.99
+ * Copyright (C) 1999 Jeff Hartmann
+ * Copyright (C) 1999 Precision Insight, Inc.
+ * Copyright (C) 1999 Xi Graphics, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included
+ * in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * JEFF HARTMANN, OR ANY OTHER CONTRIBUTORS BE LIABLE FOR ANY CLAIM,
+ * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
+ * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE
+ * OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ */
+
+#ifndef _UAPI_AGP_H
+#define _UAPI_AGP_H
+
+#define AGPIOC_BASE 'A'
+#define AGPIOC_INFO _IOR (AGPIOC_BASE, 0, struct agp_info*)
+#define AGPIOC_ACQUIRE _IO (AGPIOC_BASE, 1)
+#define AGPIOC_RELEASE _IO (AGPIOC_BASE, 2)
+#define AGPIOC_SETUP _IOW (AGPIOC_BASE, 3, struct agp_setup*)
+#define AGPIOC_RESERVE _IOW (AGPIOC_BASE, 4, struct agp_region*)
+#define AGPIOC_PROTECT _IOW (AGPIOC_BASE, 5, struct agp_region*)
+#define AGPIOC_ALLOCATE _IOWR(AGPIOC_BASE, 6, struct agp_allocate*)
+#define AGPIOC_DEALLOCATE _IOW (AGPIOC_BASE, 7, int)
+#define AGPIOC_BIND _IOW (AGPIOC_BASE, 8, struct agp_bind*)
+#define AGPIOC_UNBIND _IOW (AGPIOC_BASE, 9, struct agp_unbind*)
+#define AGPIOC_CHIPSET_FLUSH _IO (AGPIOC_BASE, 10)
+
+#define AGP_DEVICE "/dev/agpgart"
+
+#ifndef TRUE
+#define TRUE 1
+#endif
+
+#ifndef FALSE
+#define FALSE 0
+#endif
+
+#ifndef __KERNEL__
+#include <linux/types.h>
+
+struct agp_version {
+ __u16 major;
+ __u16 minor;
+};
+
+typedef struct _agp_info {
+ struct agp_version version; /* version of the driver */
+ __u32 bridge_id; /* bridge vendor/device */
+ __u32 agp_mode; /* mode info of bridge */
+ unsigned long aper_base;/* base of aperture */
+ size_t aper_size; /* size of aperture */
+ size_t pg_total; /* max pages (swap + system) */
+ size_t pg_system; /* max pages (system) */
+ size_t pg_used; /* current pages used */
+} agp_info;
+
+typedef struct _agp_setup {
+ __u32 agp_mode; /* mode info of bridge */
+} agp_setup;
+
+/*
+ * The "prot" down below needs still a "sleep" flag somehow ...
+ */
+typedef struct _agp_segment {
+ __kernel_off_t pg_start; /* starting page to populate */
+ __kernel_size_t pg_count; /* number of pages */
+ int prot; /* prot flags for mmap */
+} agp_segment;
+
+typedef struct _agp_region {
+ __kernel_pid_t pid; /* pid of process */
+ __kernel_size_t seg_count; /* number of segments */
+ struct _agp_segment *seg_list;
+} agp_region;
+
+typedef struct _agp_allocate {
+ int key; /* tag of allocation */
+ __kernel_size_t pg_count;/* number of pages */
+ __u32 type; /* 0 == normal, other devspec */
+ __u32 physical; /* device specific (some devices
+ * need a phys address of the
+ * actual page behind the gatt
+ * table) */
+} agp_allocate;
+
+typedef struct _agp_bind {
+ int key; /* tag of allocation */
+ __kernel_off_t pg_start;/* starting page to populate */
+} agp_bind;
+
+typedef struct _agp_unbind {
+ int key; /* tag of allocation */
+ __u32 priority; /* priority for paging out */
+} agp_unbind;
+
+#endif /* __KERNEL__ */
+
+#endif /* _UAPI_AGP_H */
diff --git a/include/linux/aio_abi.h b/include/uapi/linux/aio_abi.h
similarity index 100%
rename from include/linux/aio_abi.h
rename to include/uapi/linux/aio_abi.h
diff --git a/include/uapi/linux/apm_bios.h b/include/uapi/linux/apm_bios.h
new file mode 100644
index 0000000..724f409
--- /dev/null
+++ b/include/uapi/linux/apm_bios.h
@@ -0,0 +1,135 @@
+/*
+ * Include file for the interface to an APM BIOS
+ * Copyright 1994-2001 Stephen Rothwell (sfr@canb.auug.org.au)
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+#ifndef _UAPI_LINUX_APM_H
+#define _UAPI_LINUX_APM_H
+
+
+#include <linux/types.h>
+
+typedef unsigned short apm_event_t;
+typedef unsigned short apm_eventinfo_t;
+
+struct apm_bios_info {
+ __u16 version;
+ __u16 cseg;
+ __u32 offset;
+ __u16 cseg_16;
+ __u16 dseg;
+ __u16 flags;
+ __u16 cseg_len;
+ __u16 cseg_16_len;
+ __u16 dseg_len;
+};
+
+
+/*
+ * Power states
+ */
+#define APM_STATE_READY 0x0000
+#define APM_STATE_STANDBY 0x0001
+#define APM_STATE_SUSPEND 0x0002
+#define APM_STATE_OFF 0x0003
+#define APM_STATE_BUSY 0x0004
+#define APM_STATE_REJECT 0x0005
+#define APM_STATE_OEM_SYS 0x0020
+#define APM_STATE_OEM_DEV 0x0040
+
+#define APM_STATE_DISABLE 0x0000
+#define APM_STATE_ENABLE 0x0001
+
+#define APM_STATE_DISENGAGE 0x0000
+#define APM_STATE_ENGAGE 0x0001
+
+/*
+ * Events (results of Get PM Event)
+ */
+#define APM_SYS_STANDBY 0x0001
+#define APM_SYS_SUSPEND 0x0002
+#define APM_NORMAL_RESUME 0x0003
+#define APM_CRITICAL_RESUME 0x0004
+#define APM_LOW_BATTERY 0x0005
+#define APM_POWER_STATUS_CHANGE 0x0006
+#define APM_UPDATE_TIME 0x0007
+#define APM_CRITICAL_SUSPEND 0x0008
+#define APM_USER_STANDBY 0x0009
+#define APM_USER_SUSPEND 0x000a
+#define APM_STANDBY_RESUME 0x000b
+#define APM_CAPABILITY_CHANGE 0x000c
+
+/*
+ * Error codes
+ */
+#define APM_SUCCESS 0x00
+#define APM_DISABLED 0x01
+#define APM_CONNECTED 0x02
+#define APM_NOT_CONNECTED 0x03
+#define APM_16_CONNECTED 0x05
+#define APM_16_UNSUPPORTED 0x06
+#define APM_32_CONNECTED 0x07
+#define APM_32_UNSUPPORTED 0x08
+#define APM_BAD_DEVICE 0x09
+#define APM_BAD_PARAM 0x0a
+#define APM_NOT_ENGAGED 0x0b
+#define APM_BAD_FUNCTION 0x0c
+#define APM_RESUME_DISABLED 0x0d
+#define APM_NO_ERROR 0x53
+#define APM_BAD_STATE 0x60
+#define APM_NO_EVENTS 0x80
+#define APM_NOT_PRESENT 0x86
+
+/*
+ * APM Device IDs
+ */
+#define APM_DEVICE_BIOS 0x0000
+#define APM_DEVICE_ALL 0x0001
+#define APM_DEVICE_DISPLAY 0x0100
+#define APM_DEVICE_STORAGE 0x0200
+#define APM_DEVICE_PARALLEL 0x0300
+#define APM_DEVICE_SERIAL 0x0400
+#define APM_DEVICE_NETWORK 0x0500
+#define APM_DEVICE_PCMCIA 0x0600
+#define APM_DEVICE_BATTERY 0x8000
+#define APM_DEVICE_OEM 0xe000
+#define APM_DEVICE_OLD_ALL 0xffff
+#define APM_DEVICE_CLASS 0x00ff
+#define APM_DEVICE_MASK 0xff00
+
+
+/*
+ * Battery status
+ */
+#define APM_MAX_BATTERIES 2
+
+/*
+ * APM defined capability bit flags
+ */
+#define APM_CAP_GLOBAL_STANDBY 0x0001
+#define APM_CAP_GLOBAL_SUSPEND 0x0002
+#define APM_CAP_RESUME_STANDBY_TIMER 0x0004 /* Timer resume from standby */
+#define APM_CAP_RESUME_SUSPEND_TIMER 0x0008 /* Timer resume from suspend */
+#define APM_CAP_RESUME_STANDBY_RING 0x0010 /* Resume on Ring fr standby */
+#define APM_CAP_RESUME_SUSPEND_RING 0x0020 /* Resume on Ring fr suspend */
+#define APM_CAP_RESUME_STANDBY_PCMCIA 0x0040 /* Resume on PCMCIA Ring */
+#define APM_CAP_RESUME_SUSPEND_PCMCIA 0x0080 /* Resume on PCMCIA Ring */
+
+/*
+ * ioctl operations
+ */
+#include <linux/ioctl.h>
+
+#define APM_IOC_STANDBY _IO('A', 1)
+#define APM_IOC_SUSPEND _IO('A', 2)
+
+#endif /* _UAPI_LINUX_APM_H */
diff --git a/include/linux/arcfb.h b/include/uapi/linux/arcfb.h
similarity index 100%
rename from include/linux/arcfb.h
rename to include/uapi/linux/arcfb.h
diff --git a/include/uapi/linux/atalk.h b/include/uapi/linux/atalk.h
new file mode 100644
index 0000000..4bcd596
--- /dev/null
+++ b/include/uapi/linux/atalk.h
@@ -0,0 +1,44 @@
+#ifndef _UAPI__LINUX_ATALK_H__
+#define _UAPI__LINUX_ATALK_H__
+
+#include <linux/types.h>
+#include <asm/byteorder.h>
+#include <linux/socket.h>
+
+/*
+ * AppleTalk networking structures
+ *
+ * The following are directly referenced from the University Of Michigan
+ * netatalk for compatibility reasons.
+ */
+#define ATPORT_FIRST 1
+#define ATPORT_RESERVED 128
+#define ATPORT_LAST 254 /* 254 is only legal on localtalk */
+#define ATADDR_ANYNET (__u16)0
+#define ATADDR_ANYNODE (__u8)0
+#define ATADDR_ANYPORT (__u8)0
+#define ATADDR_BCAST (__u8)255
+#define DDP_MAXSZ 587
+#define DDP_MAXHOPS 15 /* 4 bits of hop counter */
+
+#define SIOCATALKDIFADDR (SIOCPROTOPRIVATE + 0)
+
+struct atalk_addr {
+ __be16 s_net;
+ __u8 s_node;
+};
+
+struct sockaddr_at {
+ __kernel_sa_family_t sat_family;
+ __u8 sat_port;
+ struct atalk_addr sat_addr;
+ char sat_zero[8];
+};
+
+struct atalk_netrange {
+ __u8 nr_phase;
+ __be16 nr_firstnet;
+ __be16 nr_lastnet;
+};
+
+#endif /* _UAPI__LINUX_ATALK_H__ */
diff --git a/include/uapi/linux/atm.h b/include/uapi/linux/atm.h
new file mode 100644
index 0000000..88399db
--- /dev/null
+++ b/include/uapi/linux/atm.h
@@ -0,0 +1,241 @@
+/* atm.h - general ATM declarations */
+
+/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */
+
+
+/*
+ * WARNING: User-space programs should not #include <linux/atm.h> directly.
+ * Instead, #include <atm.h>
+ */
+
+#ifndef _UAPI_LINUX_ATM_H
+#define _UAPI_LINUX_ATM_H
+
+/*
+ * BEGIN_xx and END_xx markers are used for automatic generation of
+ * documentation. Do not change them.
+ */
+
+#include <linux/compiler.h>
+#include <linux/atmapi.h>
+#include <linux/atmsap.h>
+#include <linux/atmioc.h>
+#include <linux/types.h>
+
+
+/* general ATM constants */
+#define ATM_CELL_SIZE 53 /* ATM cell size incl. header */
+#define ATM_CELL_PAYLOAD 48 /* ATM payload size */
+#define ATM_AAL0_SDU 52 /* AAL0 SDU size */
+#define ATM_MAX_AAL34_PDU 65535 /* maximum AAL3/4 PDU payload */
+#define ATM_AAL5_TRAILER 8 /* AAL5 trailer size */
+#define ATM_MAX_AAL5_PDU 65535 /* maximum AAL5 PDU payload */
+#define ATM_MAX_CDV 9999 /* maximum (default) CDV */
+#define ATM_NOT_RSV_VCI 32 /* first non-reserved VCI value */
+
+#define ATM_MAX_VPI 255 /* maximum VPI at the UNI */
+#define ATM_MAX_VPI_NNI 4096 /* maximum VPI at the NNI */
+#define ATM_MAX_VCI 65535 /* maximum VCI */
+
+
+/* "protcol" values for the socket system call */
+#define ATM_NO_AAL 0 /* AAL not specified */
+#define ATM_AAL0 13 /* "raw" ATM cells */
+#define ATM_AAL1 1 /* AAL1 (CBR) */
+#define ATM_AAL2 2 /* AAL2 (VBR) */
+#define ATM_AAL34 3 /* AAL3/4 (data) */
+#define ATM_AAL5 5 /* AAL5 (data) */
+
+/*
+ * socket option name coding functions
+ *
+ * Note that __SO_ENCODE and __SO_LEVEL are somewhat a hack since the
+ * << 22 only reserves 9 bits for the level. On some architectures
+ * SOL_SOCKET is 0xFFFF, so that's a bit of a problem
+ */
+
+#define __SO_ENCODE(l,n,t) ((((l) & 0x1FF) << 22) | ((n) << 16) | \
+ sizeof(t))
+#define __SO_LEVEL_MATCH(c,m) (((c) >> 22) == ((m) & 0x1FF))
+#define __SO_NUMBER(c) (((c) >> 16) & 0x3f)
+#define __SO_SIZE(c) ((c) & 0x3fff)
+
+/*
+ * ATM layer
+ */
+
+#define SO_SETCLP __SO_ENCODE(SOL_ATM,0,int)
+ /* set CLP bit value - TODO */
+#define SO_CIRANGE __SO_ENCODE(SOL_ATM,1,struct atm_cirange)
+ /* connection identifier range; socket must be
+ bound or connected */
+#define SO_ATMQOS __SO_ENCODE(SOL_ATM,2,struct atm_qos)
+ /* Quality of Service setting */
+#define SO_ATMSAP __SO_ENCODE(SOL_ATM,3,struct atm_sap)
+ /* Service Access Point */
+#define SO_ATMPVC __SO_ENCODE(SOL_ATM,4,struct sockaddr_atmpvc)
+ /* "PVC" address (also for SVCs); get only */
+#define SO_MULTIPOINT __SO_ENCODE(SOL_ATM, 5, int)
+ /* make this vc a p2mp */
+
+
+/*
+ * Note @@@: since the socket layers don't really distinguish the control and
+ * the data plane but generally seems to be data plane-centric, any layer is
+ * about equally wrong for the SAP. If you have a better idea about this,
+ * please speak up ...
+ */
+
+
+/* ATM cell header (for AAL0) */
+
+/* BEGIN_CH */
+#define ATM_HDR_GFC_MASK 0xf0000000
+#define ATM_HDR_GFC_SHIFT 28
+#define ATM_HDR_VPI_MASK 0x0ff00000
+#define ATM_HDR_VPI_SHIFT 20
+#define ATM_HDR_VCI_MASK 0x000ffff0
+#define ATM_HDR_VCI_SHIFT 4
+#define ATM_HDR_PTI_MASK 0x0000000e
+#define ATM_HDR_PTI_SHIFT 1
+#define ATM_HDR_CLP 0x00000001
+/* END_CH */
+
+
+/* PTI codings */
+
+/* BEGIN_PTI */
+#define ATM_PTI_US0 0 /* user data cell, congestion not exp, SDU-type 0 */
+#define ATM_PTI_US1 1 /* user data cell, congestion not exp, SDU-type 1 */
+#define ATM_PTI_UCES0 2 /* user data cell, cong. experienced, SDU-type 0 */
+#define ATM_PTI_UCES1 3 /* user data cell, cong. experienced, SDU-type 1 */
+#define ATM_PTI_SEGF5 4 /* segment OAM F5 flow related cell */
+#define ATM_PTI_E2EF5 5 /* end-to-end OAM F5 flow related cell */
+#define ATM_PTI_RSV_RM 6 /* reserved for traffic control/resource mgmt */
+#define ATM_PTI_RSV 7 /* reserved */
+/* END_PTI */
+
+
+/*
+ * The following items should stay in linux/atm.h, which should be linked to
+ * netatm/atm.h
+ */
+
+/* Traffic description */
+
+#define ATM_NONE 0 /* no traffic */
+#define ATM_UBR 1
+#define ATM_CBR 2
+#define ATM_VBR 3
+#define ATM_ABR 4
+#define ATM_ANYCLASS 5 /* compatible with everything */
+
+#define ATM_MAX_PCR -1 /* maximum available PCR */
+
+struct atm_trafprm {
+ unsigned char traffic_class; /* traffic class (ATM_UBR, ...) */
+ int max_pcr; /* maximum PCR in cells per second */
+ int pcr; /* desired PCR in cells per second */
+ int min_pcr; /* minimum PCR in cells per second */
+ int max_cdv; /* maximum CDV in microseconds */
+ int max_sdu; /* maximum SDU in bytes */
+ /* extra params for ABR */
+ unsigned int icr; /* Initial Cell Rate (24-bit) */
+ unsigned int tbe; /* Transient Buffer Exposure (24-bit) */
+ unsigned int frtt : 24; /* Fixed Round Trip Time (24-bit) */
+ unsigned int rif : 4; /* Rate Increment Factor (4-bit) */
+ unsigned int rdf : 4; /* Rate Decrease Factor (4-bit) */
+ unsigned int nrm_pres :1; /* nrm present bit */
+ unsigned int trm_pres :1; /* rm present bit */
+ unsigned int adtf_pres :1; /* adtf present bit */
+ unsigned int cdf_pres :1; /* cdf present bit*/
+ unsigned int nrm :3; /* Max # of Cells for each forward RM cell (3-bit) */
+ unsigned int trm :3; /* Time between forward RM cells (3-bit) */
+ unsigned int adtf :10; /* ACR Decrease Time Factor (10-bit) */
+ unsigned int cdf :3; /* Cutoff Decrease Factor (3-bit) */
+ unsigned int spare :9; /* spare bits */
+};
+
+struct atm_qos {
+ struct atm_trafprm txtp; /* parameters in TX direction */
+ struct atm_trafprm rxtp __ATM_API_ALIGN;
+ /* parameters in RX direction */
+ unsigned char aal __ATM_API_ALIGN;
+};
+
+/* PVC addressing */
+
+#define ATM_ITF_ANY -1 /* "magic" PVC address values */
+#define ATM_VPI_ANY -1
+#define ATM_VCI_ANY -1
+#define ATM_VPI_UNSPEC -2
+#define ATM_VCI_UNSPEC -2
+
+
+struct sockaddr_atmpvc {
+ unsigned short sap_family; /* address family, AF_ATMPVC */
+ struct { /* PVC address */
+ short itf; /* ATM interface */
+ short vpi; /* VPI (only 8 bits at UNI) */
+ int vci; /* VCI (only 16 bits at UNI) */
+ } sap_addr __ATM_API_ALIGN; /* PVC address */
+};
+
+/* SVC addressing */
+
+#define ATM_ESA_LEN 20 /* ATM End System Address length */
+#define ATM_E164_LEN 12 /* maximum E.164 number length */
+
+#define ATM_AFI_DCC 0x39 /* DCC ATM Format */
+#define ATM_AFI_ICD 0x47 /* ICD ATM Format */
+#define ATM_AFI_E164 0x45 /* E.164 ATM Format */
+#define ATM_AFI_LOCAL 0x49 /* Local ATM Format */
+
+#define ATM_AFI_DCC_GROUP 0xBD /* DCC ATM Group Format */
+#define ATM_AFI_ICD_GROUP 0xC5 /* ICD ATM Group Format */
+#define ATM_AFI_E164_GROUP 0xC3 /* E.164 ATM Group Format */
+#define ATM_AFI_LOCAL_GROUP 0xC7 /* Local ATM Group Format */
+
+#define ATM_LIJ_NONE 0 /* no leaf-initiated join */
+#define ATM_LIJ 1 /* request joining */
+#define ATM_LIJ_RPJ 2 /* set to root-prompted join */
+#define ATM_LIJ_NJ 3 /* set to network join */
+
+
+struct sockaddr_atmsvc {
+ unsigned short sas_family; /* address family, AF_ATMSVC */
+ struct { /* SVC address */
+ unsigned char prv[ATM_ESA_LEN];/* private ATM address */
+ char pub[ATM_E164_LEN+1]; /* public address (E.164) */
+ /* unused addresses must be bzero'ed */
+ char lij_type; /* role in LIJ call; one of ATM_LIJ* */
+ __u32 lij_id; /* LIJ call identifier */
+ } sas_addr __ATM_API_ALIGN; /* SVC address */
+};
+
+
+static __inline__ int atmsvc_addr_in_use(struct sockaddr_atmsvc addr)
+{
+ return *addr.sas_addr.prv || *addr.sas_addr.pub;
+}
+
+
+static __inline__ int atmpvc_addr_in_use(struct sockaddr_atmpvc addr)
+{
+ return addr.sap_addr.itf || addr.sap_addr.vpi || addr.sap_addr.vci;
+}
+
+
+/*
+ * Some stuff for linux/sockios.h
+ */
+
+struct atmif_sioc {
+ int number;
+ int length;
+ void __user *arg;
+};
+
+
+typedef unsigned short atm_backend_t;
+#endif /* _UAPI_LINUX_ATM_H */
diff --git a/include/linux/atm_eni.h b/include/uapi/linux/atm_eni.h
similarity index 100%
rename from include/linux/atm_eni.h
rename to include/uapi/linux/atm_eni.h
diff --git a/include/linux/atm_he.h b/include/uapi/linux/atm_he.h
similarity index 100%
rename from include/linux/atm_he.h
rename to include/uapi/linux/atm_he.h
diff --git a/include/linux/atm_idt77105.h b/include/uapi/linux/atm_idt77105.h
similarity index 100%
rename from include/linux/atm_idt77105.h
rename to include/uapi/linux/atm_idt77105.h
diff --git a/include/linux/atm_nicstar.h b/include/uapi/linux/atm_nicstar.h
similarity index 100%
rename from include/linux/atm_nicstar.h
rename to include/uapi/linux/atm_nicstar.h
diff --git a/include/uapi/linux/atm_tcp.h b/include/uapi/linux/atm_tcp.h
new file mode 100644
index 0000000..914e821
--- /dev/null
+++ b/include/uapi/linux/atm_tcp.h
@@ -0,0 +1,61 @@
+/* atm_tcp.h - Driver-specific declarations of the ATMTCP driver (for use by
+ driver-specific utilities) */
+
+/* Written 1997-2000 by Werner Almesberger, EPFL LRC/ICA */
+
+
+#ifndef _UAPILINUX_ATM_TCP_H
+#define _UAPILINUX_ATM_TCP_H
+
+#include <linux/atmapi.h>
+#include <linux/atm.h>
+#include <linux/atmioc.h>
+#include <linux/types.h>
+
+
+/*
+ * All values in struct atmtcp_hdr are in network byte order
+ */
+
+struct atmtcp_hdr {
+ __u16 vpi;
+ __u16 vci;
+ __u32 length; /* ... of data part */
+};
+
+/*
+ * All values in struct atmtcp_command are in host byte order
+ */
+
+#define ATMTCP_HDR_MAGIC (~0) /* this length indicates a command */
+#define ATMTCP_CTRL_OPEN 1 /* request/reply */
+#define ATMTCP_CTRL_CLOSE 2 /* request/reply */
+
+struct atmtcp_control {
+ struct atmtcp_hdr hdr; /* must be first */
+ int type; /* message type; both directions */
+ atm_kptr_t vcc; /* both directions */
+ struct sockaddr_atmpvc addr; /* suggested value from kernel */
+ struct atm_qos qos; /* both directions */
+ int result; /* to kernel only */
+} __ATM_API_ALIGN;
+
+/*
+ * Field usage:
+ * Messge type dir. hdr.v?i type addr qos vcc result
+ * ----------- ---- ------- ---- ---- --- --- ------
+ * OPEN K->D Y Y Y Y Y 0
+ * OPEN D->K - Y Y Y Y Y
+ * CLOSE K->D - - Y - Y 0
+ * CLOSE D->K - - - - Y Y
+ */
+
+#define SIOCSIFATMTCP _IO('a',ATMIOC_ITF) /* set ATMTCP mode */
+#define ATMTCP_CREATE _IO('a',ATMIOC_ITF+14) /* create persistent ATMTCP
+ interface */
+#define ATMTCP_REMOVE _IO('a',ATMIOC_ITF+15) /* destroy persistent ATMTCP
+ interface */
+
+
+
+#endif /* _UAPILINUX_ATM_TCP_H */
diff --git a/include/linux/atm_zatm.h b/include/uapi/linux/atm_zatm.h
similarity index 100%
rename from include/linux/atm_zatm.h
rename to include/uapi/linux/atm_zatm.h
diff --git a/include/linux/atmapi.h b/include/uapi/linux/atmapi.h
similarity index 100%
rename from include/linux/atmapi.h
rename to include/uapi/linux/atmapi.h
diff --git a/include/linux/atmarp.h b/include/uapi/linux/atmarp.h
similarity index 100%
rename from include/linux/atmarp.h
rename to include/uapi/linux/atmarp.h
diff --git a/include/linux/atmbr2684.h b/include/uapi/linux/atmbr2684.h
similarity index 100%
rename from include/linux/atmbr2684.h
rename to include/uapi/linux/atmbr2684.h
diff --git a/include/linux/atmclip.h b/include/uapi/linux/atmclip.h
similarity index 100%
rename from include/linux/atmclip.h
rename to include/uapi/linux/atmclip.h
diff --git a/include/uapi/linux/atmdev.h b/include/uapi/linux/atmdev.h
new file mode 100644
index 0000000..93e0ec0
--- /dev/null
+++ b/include/uapi/linux/atmdev.h
@@ -0,0 +1,215 @@
+/* atmdev.h - ATM device driver declarations and various related items */
+
+/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */
+
+
+#ifndef _UAPILINUX_ATMDEV_H
+#define _UAPILINUX_ATMDEV_H
+
+
+#include <linux/atmapi.h>
+#include <linux/atm.h>
+#include <linux/atmioc.h>
+
+
+#define ESI_LEN 6
+
+#define ATM_OC3_PCR (155520000/270*260/8/53)
+ /* OC3 link rate: 155520000 bps
+ SONET overhead: /270*260 (9 section, 1 path)
+ bits per cell: /8/53
+ max cell rate: 353207.547 cells/sec */
+#define ATM_25_PCR ((25600000/8-8000)/54)
+ /* 25 Mbps ATM cell rate (59111) */
+#define ATM_OC12_PCR (622080000/1080*1040/8/53)
+ /* OC12 link rate: 622080000 bps
+ SONET overhead: /1080*1040
+ bits per cell: /8/53
+ max cell rate: 1412830.188 cells/sec */
+#define ATM_DS3_PCR (8000*12)
+ /* DS3: 12 cells in a 125 usec time slot */
+
+
+#define __AAL_STAT_ITEMS \
+ __HANDLE_ITEM(tx); /* TX okay */ \
+ __HANDLE_ITEM(tx_err); /* TX errors */ \
+ __HANDLE_ITEM(rx); /* RX okay */ \
+ __HANDLE_ITEM(rx_err); /* RX errors */ \
+ __HANDLE_ITEM(rx_drop); /* RX out of memory */
+
+struct atm_aal_stats {
+#define __HANDLE_ITEM(i) int i
+ __AAL_STAT_ITEMS
+#undef __HANDLE_ITEM
+};
+
+
+struct atm_dev_stats {
+ struct atm_aal_stats aal0;
+ struct atm_aal_stats aal34;
+ struct atm_aal_stats aal5;
+} __ATM_API_ALIGN;
+
+
+#define ATM_GETLINKRATE _IOW('a',ATMIOC_ITF+1,struct atmif_sioc)
+ /* get link rate */
+#define ATM_GETNAMES _IOW('a',ATMIOC_ITF+3,struct atm_iobuf)
+ /* get interface names (numbers) */
+#define ATM_GETTYPE _IOW('a',ATMIOC_ITF+4,struct atmif_sioc)
+ /* get interface type name */
+#define ATM_GETESI _IOW('a',ATMIOC_ITF+5,struct atmif_sioc)
+ /* get interface ESI */
+#define ATM_GETADDR _IOW('a',ATMIOC_ITF+6,struct atmif_sioc)
+ /* get itf's local ATM addr. list */
+#define ATM_RSTADDR _IOW('a',ATMIOC_ITF+7,struct atmif_sioc)
+ /* reset itf's ATM address list */
+#define ATM_ADDADDR _IOW('a',ATMIOC_ITF+8,struct atmif_sioc)
+ /* add a local ATM address */
+#define ATM_DELADDR _IOW('a',ATMIOC_ITF+9,struct atmif_sioc)
+ /* remove a local ATM address */
+#define ATM_GETCIRANGE _IOW('a',ATMIOC_ITF+10,struct atmif_sioc)
+ /* get connection identifier range */
+#define ATM_SETCIRANGE _IOW('a',ATMIOC_ITF+11,struct atmif_sioc)
+ /* set connection identifier range */
+#define ATM_SETESI _IOW('a',ATMIOC_ITF+12,struct atmif_sioc)
+ /* set interface ESI */
+#define ATM_SETESIF _IOW('a',ATMIOC_ITF+13,struct atmif_sioc)
+ /* force interface ESI */
+#define ATM_ADDLECSADDR _IOW('a', ATMIOC_ITF+14, struct atmif_sioc)
+ /* register a LECS address */
+#define ATM_DELLECSADDR _IOW('a', ATMIOC_ITF+15, struct atmif_sioc)
+ /* unregister a LECS address */
+#define ATM_GETLECSADDR _IOW('a', ATMIOC_ITF+16, struct atmif_sioc)
+ /* retrieve LECS address(es) */
+
+#define ATM_GETSTAT _IOW('a',ATMIOC_SARCOM+0,struct atmif_sioc)
+ /* get AAL layer statistics */
+#define ATM_GETSTATZ _IOW('a',ATMIOC_SARCOM+1,struct atmif_sioc)
+ /* get AAL layer statistics and zero */
+#define ATM_GETLOOP _IOW('a',ATMIOC_SARCOM+2,struct atmif_sioc)
+ /* get loopback mode */
+#define ATM_SETLOOP _IOW('a',ATMIOC_SARCOM+3,struct atmif_sioc)
+ /* set loopback mode */
+#define ATM_QUERYLOOP _IOW('a',ATMIOC_SARCOM+4,struct atmif_sioc)
+ /* query supported loopback modes */
+#define ATM_SETSC _IOW('a',ATMIOC_SPECIAL+1,int)
+ /* enable or disable single-copy */
+#define ATM_SETBACKEND _IOW('a',ATMIOC_SPECIAL+2,atm_backend_t)
+ /* set backend handler */
+#define ATM_NEWBACKENDIF _IOW('a',ATMIOC_SPECIAL+3,atm_backend_t)
+ /* use backend to make new if */
+#define ATM_ADDPARTY _IOW('a', ATMIOC_SPECIAL+4,struct atm_iobuf)
+ /* add party to p2mp call */
+#ifdef CONFIG_COMPAT
+/* It actually takes struct sockaddr_atmsvc, not struct atm_iobuf */
+#define COMPAT_ATM_ADDPARTY _IOW('a', ATMIOC_SPECIAL+4,struct compat_atm_iobuf)
+#endif
+#define ATM_DROPPARTY _IOW('a', ATMIOC_SPECIAL+5,int)
+ /* drop party from p2mp call */
+
+/*
+ * These are backend handkers that can be set via the ATM_SETBACKEND call
+ * above. In the future we may support dynamic loading of these - for now,
+ * they're just being used to share the ATMIOC_BACKEND ioctls
+ */
+#define ATM_BACKEND_RAW 0
+#define ATM_BACKEND_PPP 1 /* PPPoATM - RFC2364 */
+#define ATM_BACKEND_BR2684 2 /* Bridged RFC1483/2684 */
+
+/* for ATM_GETTYPE */
+#define ATM_ITFTYP_LEN 8 /* maximum length of interface type name */
+
+/*
+ * Loopback modes for ATM_{PHY,SAR}_{GET,SET}LOOP
+ */
+
+/* Point of loopback CPU-->SAR-->PHY-->line--> ... */
+#define __ATM_LM_NONE 0 /* no loop back ^ ^ ^ ^ */
+#define __ATM_LM_AAL 1 /* loop back PDUs --' | | | */
+#define __ATM_LM_ATM 2 /* loop back ATM cells ---' | | */
+/* RESERVED 4 loop back on PHY side ---' */
+#define __ATM_LM_PHY 8 /* loop back bits (digital) ----' | */
+#define __ATM_LM_ANALOG 16 /* loop back the analog signal --------' */
+
+/* Direction of loopback */
+#define __ATM_LM_MKLOC(n) ((n)) /* Local (i.e. loop TX to RX) */
+#define __ATM_LM_MKRMT(n) ((n) << 8) /* Remote (i.e. loop RX to TX) */
+
+#define __ATM_LM_XTLOC(n) ((n) & 0xff)
+#define __ATM_LM_XTRMT(n) (((n) >> 8) & 0xff)
+
+#define ATM_LM_NONE 0 /* no loopback */
+
+#define ATM_LM_LOC_AAL __ATM_LM_MKLOC(__ATM_LM_AAL)
+#define ATM_LM_LOC_ATM __ATM_LM_MKLOC(__ATM_LM_ATM)
+#define ATM_LM_LOC_PHY __ATM_LM_MKLOC(__ATM_LM_PHY)
+#define ATM_LM_LOC_ANALOG __ATM_LM_MKLOC(__ATM_LM_ANALOG)
+
+#define ATM_LM_RMT_AAL __ATM_LM_MKRMT(__ATM_LM_AAL)
+#define ATM_LM_RMT_ATM __ATM_LM_MKRMT(__ATM_LM_ATM)
+#define ATM_LM_RMT_PHY __ATM_LM_MKRMT(__ATM_LM_PHY)
+#define ATM_LM_RMT_ANALOG __ATM_LM_MKRMT(__ATM_LM_ANALOG)
+
+/*
+ * Note: ATM_LM_LOC_* and ATM_LM_RMT_* can be combined, provided that
+ * __ATM_LM_XTLOC(x) <= __ATM_LM_XTRMT(x)
+ */
+
+
+struct atm_iobuf {
+ int length;
+ void __user *buffer;
+};
+
+/* for ATM_GETCIRANGE / ATM_SETCIRANGE */
+
+#define ATM_CI_MAX -1 /* use maximum range of VPI/VCI */
+
+struct atm_cirange {
+ signed char vpi_bits; /* 1..8, ATM_CI_MAX (-1) for maximum */
+ signed char vci_bits; /* 1..16, ATM_CI_MAX (-1) for maximum */
+};
+
+/* for ATM_SETSC; actually taken from the ATM_VF number space */
+
+#define ATM_SC_RX 1024 /* enable RX single-copy */
+#define ATM_SC_TX 2048 /* enable TX single-copy */
+
+#define ATM_BACKLOG_DEFAULT 32 /* if we get more, we're likely to time out
+ anyway */
+
+/* MF: change_qos (Modify) flags */
+
+#define ATM_MF_IMMED 1 /* Block until change is effective */
+#define ATM_MF_INC_RSV 2 /* Change reservation on increase */
+#define ATM_MF_INC_SHP 4 /* Change shaping on increase */
+#define ATM_MF_DEC_RSV 8 /* Change reservation on decrease */
+#define ATM_MF_DEC_SHP 16 /* Change shaping on decrease */
+#define ATM_MF_BWD 32 /* Set the backward direction parameters */
+
+#define ATM_MF_SET (ATM_MF_INC_RSV | ATM_MF_INC_SHP | ATM_MF_DEC_RSV | \
+ ATM_MF_DEC_SHP | ATM_MF_BWD)
+
+/*
+ * ATM_VS_* are used to express VC state in a human-friendly way.
+ */
+
+#define ATM_VS_IDLE 0 /* VC is not used */
+#define ATM_VS_CONNECTED 1 /* VC is connected */
+#define ATM_VS_CLOSING 2 /* VC is closing */
+#define ATM_VS_LISTEN 3 /* VC is listening for incoming setups */
+#define ATM_VS_INUSE 4 /* VC is in use (registered with atmsigd) */
+#define ATM_VS_BOUND 5 /* VC is bound */
+
+#define ATM_VS2TXT_MAP \
+ "IDLE", "CONNECTED", "CLOSING", "LISTEN", "INUSE", "BOUND"
+
+#define ATM_VF2TXT_MAP \
+ "ADDR", "READY", "PARTIAL", "REGIS", \
+ "RELEASED", "HASQOS", "LISTEN", "META", \
+ "256", "512", "1024", "2048", \
+ "SESSION", "HASSAP", "BOUND", "CLOSE"
+
+
+
+#endif /* _UAPILINUX_ATMDEV_H */
diff --git a/include/linux/atmioc.h b/include/uapi/linux/atmioc.h
similarity index 100%
rename from include/linux/atmioc.h
rename to include/uapi/linux/atmioc.h
diff --git a/include/linux/atmlec.h b/include/uapi/linux/atmlec.h
similarity index 100%
rename from include/linux/atmlec.h
rename to include/uapi/linux/atmlec.h
diff --git a/include/linux/atmmpc.h b/include/uapi/linux/atmmpc.h
similarity index 100%
rename from include/linux/atmmpc.h
rename to include/uapi/linux/atmmpc.h
diff --git a/include/linux/atmppp.h b/include/uapi/linux/atmppp.h
similarity index 100%
rename from include/linux/atmppp.h
rename to include/uapi/linux/atmppp.h
diff --git a/include/linux/atmsap.h b/include/uapi/linux/atmsap.h
similarity index 100%
rename from include/linux/atmsap.h
rename to include/uapi/linux/atmsap.h
diff --git a/include/linux/atmsvc.h b/include/uapi/linux/atmsvc.h
similarity index 100%
rename from include/linux/atmsvc.h
rename to include/uapi/linux/atmsvc.h
diff --git a/include/uapi/linux/audit.h b/include/uapi/linux/audit.h
new file mode 100644
index 0000000..76352ac
--- /dev/null
+++ b/include/uapi/linux/audit.h
@@ -0,0 +1,404 @@
+/* audit.h -- Auditing support
+ *
+ * Copyright 2003-2004 Red Hat Inc., Durham, North Carolina.
+ * All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Written by Rickard E. (Rik) Faith <faith@redhat.com>
+ *
+ */
+
+#ifndef _UAPI_LINUX_AUDIT_H_
+#define _UAPI_LINUX_AUDIT_H_
+
+#include <linux/types.h>
+#include <linux/elf-em.h>
+#include <linux/ptrace.h>
+
+/* The netlink messages for the audit system is divided into blocks:
+ * 1000 - 1099 are for commanding the audit system
+ * 1100 - 1199 user space trusted application messages
+ * 1200 - 1299 messages internal to the audit daemon
+ * 1300 - 1399 audit event messages
+ * 1400 - 1499 SE Linux use
+ * 1500 - 1599 kernel LSPP events
+ * 1600 - 1699 kernel crypto events
+ * 1700 - 1799 kernel anomaly records
+ * 1800 - 1899 kernel integrity events
+ * 1900 - 1999 future kernel use
+ * 2000 is for otherwise unclassified kernel audit messages (legacy)
+ * 2001 - 2099 unused (kernel)
+ * 2100 - 2199 user space anomaly records
+ * 2200 - 2299 user space actions taken in response to anomalies
+ * 2300 - 2399 user space generated LSPP events
+ * 2400 - 2499 user space crypto events
+ * 2500 - 2999 future user space (maybe integrity labels and related events)
+ *
+ * Messages from 1000-1199 are bi-directional. 1200-1299 & 2100 - 2999 are
+ * exclusively user space. 1300-2099 is kernel --> user space
+ * communication.
+ */
+#define AUDIT_GET 1000 /* Get status */
+#define AUDIT_SET 1001 /* Set status (enable/disable/auditd) */
+#define AUDIT_LIST 1002 /* List syscall rules -- deprecated */
+#define AUDIT_ADD 1003 /* Add syscall rule -- deprecated */
+#define AUDIT_DEL 1004 /* Delete syscall rule -- deprecated */
+#define AUDIT_USER 1005 /* Message from userspace -- deprecated */
+#define AUDIT_LOGIN 1006 /* Define the login id and information */
+#define AUDIT_WATCH_INS 1007 /* Insert file/dir watch entry */
+#define AUDIT_WATCH_REM 1008 /* Remove file/dir watch entry */
+#define AUDIT_WATCH_LIST 1009 /* List all file/dir watches */
+#define AUDIT_SIGNAL_INFO 1010 /* Get info about sender of signal to auditd */
+#define AUDIT_ADD_RULE 1011 /* Add syscall filtering rule */
+#define AUDIT_DEL_RULE 1012 /* Delete syscall filtering rule */
+#define AUDIT_LIST_RULES 1013 /* List syscall filtering rules */
+#define AUDIT_TRIM 1014 /* Trim junk from watched tree */
+#define AUDIT_MAKE_EQUIV 1015 /* Append to watched tree */
+#define AUDIT_TTY_GET 1016 /* Get TTY auditing status */
+#define AUDIT_TTY_SET 1017 /* Set TTY auditing status */
+
+#define AUDIT_FIRST_USER_MSG 1100 /* Userspace messages mostly uninteresting to kernel */
+#define AUDIT_USER_AVC 1107 /* We filter this differently */
+#define AUDIT_USER_TTY 1124 /* Non-ICANON TTY input meaning */
+#define AUDIT_LAST_USER_MSG 1199
+#define AUDIT_FIRST_USER_MSG2 2100 /* More user space messages */
+#define AUDIT_LAST_USER_MSG2 2999
+
+#define AUDIT_DAEMON_START 1200 /* Daemon startup record */
+#define AUDIT_DAEMON_END 1201 /* Daemon normal stop record */
+#define AUDIT_DAEMON_ABORT 1202 /* Daemon error stop record */
+#define AUDIT_DAEMON_CONFIG 1203 /* Daemon config change */
+
+#define AUDIT_SYSCALL 1300 /* Syscall event */
+/* #define AUDIT_FS_WATCH 1301 * Deprecated */
+#define AUDIT_PATH 1302 /* Filename path information */
+#define AUDIT_IPC 1303 /* IPC record */
+#define AUDIT_SOCKETCALL 1304 /* sys_socketcall arguments */
+#define AUDIT_CONFIG_CHANGE 1305 /* Audit system configuration change */
+#define AUDIT_SOCKADDR 1306 /* sockaddr copied as syscall arg */
+#define AUDIT_CWD 1307 /* Current working directory */
+#define AUDIT_EXECVE 1309 /* execve arguments */
+#define AUDIT_IPC_SET_PERM 1311 /* IPC new permissions record type */
+#define AUDIT_MQ_OPEN 1312 /* POSIX MQ open record type */
+#define AUDIT_MQ_SENDRECV 1313 /* POSIX MQ send/receive record type */
+#define AUDIT_MQ_NOTIFY 1314 /* POSIX MQ notify record type */
+#define AUDIT_MQ_GETSETATTR 1315 /* POSIX MQ get/set attribute record type */
+#define AUDIT_KERNEL_OTHER 1316 /* For use by 3rd party modules */
+#define AUDIT_FD_PAIR 1317 /* audit record for pipe/socketpair */
+#define AUDIT_OBJ_PID 1318 /* ptrace target */
+#define AUDIT_TTY 1319 /* Input on an administrative TTY */
+#define AUDIT_EOE 1320 /* End of multi-record event */
+#define AUDIT_BPRM_FCAPS 1321 /* Information about fcaps increasing perms */
+#define AUDIT_CAPSET 1322 /* Record showing argument to sys_capset */
+#define AUDIT_MMAP 1323 /* Record showing descriptor and flags in mmap */
+#define AUDIT_NETFILTER_PKT 1324 /* Packets traversing netfilter chains */
+#define AUDIT_NETFILTER_CFG 1325 /* Netfilter chain modifications */
+
+#define AUDIT_AVC 1400 /* SE Linux avc denial or grant */
+#define AUDIT_SELINUX_ERR 1401 /* Internal SE Linux Errors */
+#define AUDIT_AVC_PATH 1402 /* dentry, vfsmount pair from avc */
+#define AUDIT_MAC_POLICY_LOAD 1403 /* Policy file load */
+#define AUDIT_MAC_STATUS 1404 /* Changed enforcing,permissive,off */
+#define AUDIT_MAC_CONFIG_CHANGE 1405 /* Changes to booleans */
+#define AUDIT_MAC_UNLBL_ALLOW 1406 /* NetLabel: allow unlabeled traffic */
+#define AUDIT_MAC_CIPSOV4_ADD 1407 /* NetLabel: add CIPSOv4 DOI entry */
+#define AUDIT_MAC_CIPSOV4_DEL 1408 /* NetLabel: del CIPSOv4 DOI entry */
+#define AUDIT_MAC_MAP_ADD 1409 /* NetLabel: add LSM domain mapping */
+#define AUDIT_MAC_MAP_DEL 1410 /* NetLabel: del LSM domain mapping */
+#define AUDIT_MAC_IPSEC_ADDSA 1411 /* Not used */
+#define AUDIT_MAC_IPSEC_DELSA 1412 /* Not used */
+#define AUDIT_MAC_IPSEC_ADDSPD 1413 /* Not used */
+#define AUDIT_MAC_IPSEC_DELSPD 1414 /* Not used */
+#define AUDIT_MAC_IPSEC_EVENT 1415 /* Audit an IPSec event */
+#define AUDIT_MAC_UNLBL_STCADD 1416 /* NetLabel: add a static label */
+#define AUDIT_MAC_UNLBL_STCDEL 1417 /* NetLabel: del a static label */
+
+#define AUDIT_FIRST_KERN_ANOM_MSG 1700
+#define AUDIT_LAST_KERN_ANOM_MSG 1799
+#define AUDIT_ANOM_PROMISCUOUS 1700 /* Device changed promiscuous mode */
+#define AUDIT_ANOM_ABEND 1701 /* Process ended abnormally */
+#define AUDIT_ANOM_LINK 1702 /* Suspicious use of file links */
+#define AUDIT_INTEGRITY_DATA 1800 /* Data integrity verification */
+#define AUDIT_INTEGRITY_METADATA 1801 /* Metadata integrity verification */
+#define AUDIT_INTEGRITY_STATUS 1802 /* Integrity enable status */
+#define AUDIT_INTEGRITY_HASH 1803 /* Integrity HASH type */
+#define AUDIT_INTEGRITY_PCR 1804 /* PCR invalidation msgs */
+#define AUDIT_INTEGRITY_RULE 1805 /* policy rule */
+
+#define AUDIT_KERNEL 2000 /* Asynchronous audit record. NOT A REQUEST. */
+
+/* Rule flags */
+#define AUDIT_FILTER_USER 0x00 /* Apply rule to user-generated messages */
+#define AUDIT_FILTER_TASK 0x01 /* Apply rule at task creation (not syscall) */
+#define AUDIT_FILTER_ENTRY 0x02 /* Apply rule at syscall entry */
+#define AUDIT_FILTER_WATCH 0x03 /* Apply rule to file system watches */
+#define AUDIT_FILTER_EXIT 0x04 /* Apply rule at syscall exit */
+#define AUDIT_FILTER_TYPE 0x05 /* Apply rule at audit_log_start */
+
+#define AUDIT_NR_FILTERS 6
+
+#define AUDIT_FILTER_PREPEND 0x10 /* Prepend to front of list */
+
+/* Rule actions */
+#define AUDIT_NEVER 0 /* Do not build context if rule matches */
+#define AUDIT_POSSIBLE 1 /* Build context if rule matches */
+#define AUDIT_ALWAYS 2 /* Generate audit record if rule matches */
+
+/* Rule structure sizes -- if these change, different AUDIT_ADD and
+ * AUDIT_LIST commands must be implemented. */
+#define AUDIT_MAX_FIELDS 64
+#define AUDIT_MAX_KEY_LEN 256
+#define AUDIT_BITMASK_SIZE 64
+#define AUDIT_WORD(nr) ((__u32)((nr)/32))
+#define AUDIT_BIT(nr) (1 << ((nr) - AUDIT_WORD(nr)*32))
+
+#define AUDIT_SYSCALL_CLASSES 16
+#define AUDIT_CLASS_DIR_WRITE 0
+#define AUDIT_CLASS_DIR_WRITE_32 1
+#define AUDIT_CLASS_CHATTR 2
+#define AUDIT_CLASS_CHATTR_32 3
+#define AUDIT_CLASS_READ 4
+#define AUDIT_CLASS_READ_32 5
+#define AUDIT_CLASS_WRITE 6
+#define AUDIT_CLASS_WRITE_32 7
+#define AUDIT_CLASS_SIGNAL 8
+#define AUDIT_CLASS_SIGNAL_32 9
+
+/* This bitmask is used to validate user input. It represents all bits that
+ * are currently used in an audit field constant understood by the kernel.
+ * If you are adding a new #define AUDIT_<whatever>, please ensure that
+ * AUDIT_UNUSED_BITS is updated if need be. */
+#define AUDIT_UNUSED_BITS 0x07FFFC00
+
+/* AUDIT_FIELD_COMPARE rule list */
+#define AUDIT_COMPARE_UID_TO_OBJ_UID 1
+#define AUDIT_COMPARE_GID_TO_OBJ_GID 2
+#define AUDIT_COMPARE_EUID_TO_OBJ_UID 3
+#define AUDIT_COMPARE_EGID_TO_OBJ_GID 4
+#define AUDIT_COMPARE_AUID_TO_OBJ_UID 5
+#define AUDIT_COMPARE_SUID_TO_OBJ_UID 6
+#define AUDIT_COMPARE_SGID_TO_OBJ_GID 7
+#define AUDIT_COMPARE_FSUID_TO_OBJ_UID 8
+#define AUDIT_COMPARE_FSGID_TO_OBJ_GID 9
+
+#define AUDIT_COMPARE_UID_TO_AUID 10
+#define AUDIT_COMPARE_UID_TO_EUID 11
+#define AUDIT_COMPARE_UID_TO_FSUID 12
+#define AUDIT_COMPARE_UID_TO_SUID 13
+
+#define AUDIT_COMPARE_AUID_TO_FSUID 14
+#define AUDIT_COMPARE_AUID_TO_SUID 15
+#define AUDIT_COMPARE_AUID_TO_EUID 16
+
+#define AUDIT_COMPARE_EUID_TO_SUID 17
+#define AUDIT_COMPARE_EUID_TO_FSUID 18
+
+#define AUDIT_COMPARE_SUID_TO_FSUID 19
+
+#define AUDIT_COMPARE_GID_TO_EGID 20
+#define AUDIT_COMPARE_GID_TO_FSGID 21
+#define AUDIT_COMPARE_GID_TO_SGID 22
+
+#define AUDIT_COMPARE_EGID_TO_FSGID 23
+#define AUDIT_COMPARE_EGID_TO_SGID 24
+#define AUDIT_COMPARE_SGID_TO_FSGID 25
+
+#define AUDIT_MAX_FIELD_COMPARE AUDIT_COMPARE_SGID_TO_FSGID
+
+/* Rule fields */
+ /* These are useful when checking the
+ * task structure at task creation time
+ * (AUDIT_PER_TASK). */
+#define AUDIT_PID 0
+#define AUDIT_UID 1
+#define AUDIT_EUID 2
+#define AUDIT_SUID 3
+#define AUDIT_FSUID 4
+#define AUDIT_GID 5
+#define AUDIT_EGID 6
+#define AUDIT_SGID 7
+#define AUDIT_FSGID 8
+#define AUDIT_LOGINUID 9
+#define AUDIT_PERS 10
+#define AUDIT_ARCH 11
+#define AUDIT_MSGTYPE 12
+#define AUDIT_SUBJ_USER 13 /* security label user */
+#define AUDIT_SUBJ_ROLE 14 /* security label role */
+#define AUDIT_SUBJ_TYPE 15 /* security label type */
+#define AUDIT_SUBJ_SEN 16 /* security label sensitivity label */
+#define AUDIT_SUBJ_CLR 17 /* security label clearance label */
+#define AUDIT_PPID 18
+#define AUDIT_OBJ_USER 19
+#define AUDIT_OBJ_ROLE 20
+#define AUDIT_OBJ_TYPE 21
+#define AUDIT_OBJ_LEV_LOW 22
+#define AUDIT_OBJ_LEV_HIGH 23
+
+ /* These are ONLY useful when checking
+ * at syscall exit time (AUDIT_AT_EXIT). */
+#define AUDIT_DEVMAJOR 100
+#define AUDIT_DEVMINOR 101
+#define AUDIT_INODE 102
+#define AUDIT_EXIT 103
+#define AUDIT_SUCCESS 104 /* exit >= 0; value ignored */
+#define AUDIT_WATCH 105
+#define AUDIT_PERM 106
+#define AUDIT_DIR 107
+#define AUDIT_FILETYPE 108
+#define AUDIT_OBJ_UID 109
+#define AUDIT_OBJ_GID 110
+#define AUDIT_FIELD_COMPARE 111
+
+#define AUDIT_ARG0 200
+#define AUDIT_ARG1 (AUDIT_ARG0+1)
+#define AUDIT_ARG2 (AUDIT_ARG0+2)
+#define AUDIT_ARG3 (AUDIT_ARG0+3)
+
+#define AUDIT_FILTERKEY 210
+
+#define AUDIT_NEGATE 0x80000000
+
+/* These are the supported operators.
+ * 4 2 1 8
+ * = > < ?
+ * ----------
+ * 0 0 0 0 00 nonsense
+ * 0 0 0 1 08 & bit mask
+ * 0 0 1 0 10 <
+ * 0 1 0 0 20 >
+ * 0 1 1 0 30 !=
+ * 1 0 0 0 40 =
+ * 1 0 0 1 48 &= bit test
+ * 1 0 1 0 50 <=
+ * 1 1 0 0 60 >=
+ * 1 1 1 1 78 all operators
+ */
+#define AUDIT_BIT_MASK 0x08000000
+#define AUDIT_LESS_THAN 0x10000000
+#define AUDIT_GREATER_THAN 0x20000000
+#define AUDIT_NOT_EQUAL 0x30000000
+#define AUDIT_EQUAL 0x40000000
+#define AUDIT_BIT_TEST (AUDIT_BIT_MASK|AUDIT_EQUAL)
+#define AUDIT_LESS_THAN_OR_EQUAL (AUDIT_LESS_THAN|AUDIT_EQUAL)
+#define AUDIT_GREATER_THAN_OR_EQUAL (AUDIT_GREATER_THAN|AUDIT_EQUAL)
+#define AUDIT_OPERATORS (AUDIT_EQUAL|AUDIT_NOT_EQUAL|AUDIT_BIT_MASK)
+
+enum {
+ Audit_equal,
+ Audit_not_equal,
+ Audit_bitmask,
+ Audit_bittest,
+ Audit_lt,
+ Audit_gt,
+ Audit_le,
+ Audit_ge,
+ Audit_bad
+};
+
+/* Status symbols */
+ /* Mask values */
+#define AUDIT_STATUS_ENABLED 0x0001
+#define AUDIT_STATUS_FAILURE 0x0002
+#define AUDIT_STATUS_PID 0x0004
+#define AUDIT_STATUS_RATE_LIMIT 0x0008
+#define AUDIT_STATUS_BACKLOG_LIMIT 0x0010
+ /* Failure-to-log actions */
+#define AUDIT_FAIL_SILENT 0
+#define AUDIT_FAIL_PRINTK 1
+#define AUDIT_FAIL_PANIC 2
+
+/* distinguish syscall tables */
+#define __AUDIT_ARCH_64BIT 0x80000000
+#define __AUDIT_ARCH_LE 0x40000000
+#define AUDIT_ARCH_ALPHA (EM_ALPHA|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
+#define AUDIT_ARCH_ARM (EM_ARM|__AUDIT_ARCH_LE)
+#define AUDIT_ARCH_ARMEB (EM_ARM)
+#define AUDIT_ARCH_CRIS (EM_CRIS|__AUDIT_ARCH_LE)
+#define AUDIT_ARCH_FRV (EM_FRV)
+#define AUDIT_ARCH_H8300 (EM_H8_300)
+#define AUDIT_ARCH_I386 (EM_386|__AUDIT_ARCH_LE)
+#define AUDIT_ARCH_IA64 (EM_IA_64|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
+#define AUDIT_ARCH_M32R (EM_M32R)
+#define AUDIT_ARCH_M68K (EM_68K)
+#define AUDIT_ARCH_MIPS (EM_MIPS)
+#define AUDIT_ARCH_MIPSEL (EM_MIPS|__AUDIT_ARCH_LE)
+#define AUDIT_ARCH_MIPS64 (EM_MIPS|__AUDIT_ARCH_64BIT)
+#define AUDIT_ARCH_MIPSEL64 (EM_MIPS|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
+#define AUDIT_ARCH_OPENRISC (EM_OPENRISC)
+#define AUDIT_ARCH_PARISC (EM_PARISC)
+#define AUDIT_ARCH_PARISC64 (EM_PARISC|__AUDIT_ARCH_64BIT)
+#define AUDIT_ARCH_PPC (EM_PPC)
+#define AUDIT_ARCH_PPC64 (EM_PPC64|__AUDIT_ARCH_64BIT)
+#define AUDIT_ARCH_S390 (EM_S390)
+#define AUDIT_ARCH_S390X (EM_S390|__AUDIT_ARCH_64BIT)
+#define AUDIT_ARCH_SH (EM_SH)
+#define AUDIT_ARCH_SHEL (EM_SH|__AUDIT_ARCH_LE)
+#define AUDIT_ARCH_SH64 (EM_SH|__AUDIT_ARCH_64BIT)
+#define AUDIT_ARCH_SHEL64 (EM_SH|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
+#define AUDIT_ARCH_SPARC (EM_SPARC)
+#define AUDIT_ARCH_SPARC64 (EM_SPARCV9|__AUDIT_ARCH_64BIT)
+#define AUDIT_ARCH_X86_64 (EM_X86_64|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
+
+#define AUDIT_PERM_EXEC 1
+#define AUDIT_PERM_WRITE 2
+#define AUDIT_PERM_READ 4
+#define AUDIT_PERM_ATTR 8
+
+struct audit_status {
+ __u32 mask; /* Bit mask for valid entries */
+ __u32 enabled; /* 1 = enabled, 0 = disabled */
+ __u32 failure; /* Failure-to-log action */
+ __u32 pid; /* pid of auditd process */
+ __u32 rate_limit; /* messages rate limit (per second) */
+ __u32 backlog_limit; /* waiting messages limit */
+ __u32 lost; /* messages lost */
+ __u32 backlog; /* messages waiting in queue */
+};
+
+struct audit_tty_status {
+ __u32 enabled; /* 1 = enabled, 0 = disabled */
+};
+
+/* audit_rule_data supports filter rules with both integer and string
+ * fields. It corresponds with AUDIT_ADD_RULE, AUDIT_DEL_RULE and
+ * AUDIT_LIST_RULES requests.
+ */
+struct audit_rule_data {
+ __u32 flags; /* AUDIT_PER_{TASK,CALL}, AUDIT_PREPEND */
+ __u32 action; /* AUDIT_NEVER, AUDIT_POSSIBLE, AUDIT_ALWAYS */
+ __u32 field_count;
+ __u32 mask[AUDIT_BITMASK_SIZE]; /* syscall(s) affected */
+ __u32 fields[AUDIT_MAX_FIELDS];
+ __u32 values[AUDIT_MAX_FIELDS];
+ __u32 fieldflags[AUDIT_MAX_FIELDS];
+ __u32 buflen; /* total length of string fields */
+ char buf[0]; /* string fields buffer */
+};
+
+/* audit_rule is supported to maintain backward compatibility with
+ * userspace. It supports integer fields only and corresponds to
+ * AUDIT_ADD, AUDIT_DEL and AUDIT_LIST requests.
+ */
+struct audit_rule { /* for AUDIT_LIST, AUDIT_ADD, and AUDIT_DEL */
+ __u32 flags; /* AUDIT_PER_{TASK,CALL}, AUDIT_PREPEND */
+ __u32 action; /* AUDIT_NEVER, AUDIT_POSSIBLE, AUDIT_ALWAYS */
+ __u32 field_count;
+ __u32 mask[AUDIT_BITMASK_SIZE];
+ __u32 fields[AUDIT_MAX_FIELDS];
+ __u32 values[AUDIT_MAX_FIELDS];
+};
+
+#endif /* _UAPI_LINUX_AUDIT_H_ */
diff --git a/include/uapi/linux/auto_fs.h b/include/uapi/linux/auto_fs.h
new file mode 100644
index 0000000..77cdba9
--- /dev/null
+++ b/include/uapi/linux/auto_fs.h
@@ -0,0 +1,83 @@
+/* -*- linux-c -*- ------------------------------------------------------- *
+ *
+ * linux/include/linux/auto_fs.h
+ *
+ * Copyright 1997 Transmeta Corporation - All Rights Reserved
+ *
+ * This file is part of the Linux kernel and is made available under
+ * the terms of the GNU General Public License, version 2, or at your
+ * option, any later version, incorporated herein by reference.
+ *
+ * ----------------------------------------------------------------------- */
+
+
+#ifndef _UAPI_LINUX_AUTO_FS_H
+#define _UAPI_LINUX_AUTO_FS_H
+
+#include <linux/types.h>
+#ifndef __KERNEL__
+#include <sys/ioctl.h>
+#endif /* __KERNEL__ */
+
+
+/* This file describes autofs v3 */
+#define AUTOFS_PROTO_VERSION 3
+
+/* Range of protocol versions defined */
+#define AUTOFS_MAX_PROTO_VERSION AUTOFS_PROTO_VERSION
+#define AUTOFS_MIN_PROTO_VERSION AUTOFS_PROTO_VERSION
+
+/*
+ * Architectures where both 32- and 64-bit binaries can be executed
+ * on 64-bit kernels need this. This keeps the structure format
+ * uniform, and makes sure the wait_queue_token isn't too big to be
+ * passed back down to the kernel.
+ *
+ * This assumes that on these architectures:
+ * mode 32 bit 64 bit
+ * -------------------------
+ * int 32 bit 32 bit
+ * long 32 bit 64 bit
+ *
+ * If so, 32-bit user-space code should be backwards compatible.
+ */
+
+#if defined(__sparc__) || defined(__mips__) || defined(__x86_64__) \
+ || defined(__powerpc__) || defined(__s390__)
+typedef unsigned int autofs_wqt_t;
+#else
+typedef unsigned long autofs_wqt_t;
+#endif
+
+/* Packet types */
+#define autofs_ptype_missing 0 /* Missing entry (mount request) */
+#define autofs_ptype_expire 1 /* Expire entry (umount request) */
+
+struct autofs_packet_hdr {
+ int proto_version; /* Protocol version */
+ int type; /* Type of packet */
+};
+
+struct autofs_packet_missing {
+ struct autofs_packet_hdr hdr;
+ autofs_wqt_t wait_queue_token;
+ int len;
+ char name[NAME_MAX+1];
+};
+
+/* v3 expire (via ioctl) */
+struct autofs_packet_expire {
+ struct autofs_packet_hdr hdr;
+ int len;
+ char name[NAME_MAX+1];
+};
+
+#define AUTOFS_IOC_READY _IO(0x93,0x60)
+#define AUTOFS_IOC_FAIL _IO(0x93,0x61)
+#define AUTOFS_IOC_CATATONIC _IO(0x93,0x62)
+#define AUTOFS_IOC_PROTOVER _IOR(0x93,0x63,int)
+#define AUTOFS_IOC_SETTIMEOUT32 _IOWR(0x93,0x64,compat_ulong_t)
+#define AUTOFS_IOC_SETTIMEOUT _IOWR(0x93,0x64,unsigned long)
+#define AUTOFS_IOC_EXPIRE _IOR(0x93,0x65,struct autofs_packet_expire)
+
+#endif /* _UAPI_LINUX_AUTO_FS_H */
diff --git a/include/linux/auto_fs4.h b/include/uapi/linux/auto_fs4.h
similarity index 100%
rename from include/linux/auto_fs4.h
rename to include/uapi/linux/auto_fs4.h
diff --git a/include/uapi/linux/auxvec.h b/include/uapi/linux/auxvec.h
new file mode 100644
index 0000000..61594d5
--- /dev/null
+++ b/include/uapi/linux/auxvec.h
@@ -0,0 +1,35 @@
+#ifndef _UAPI_LINUX_AUXVEC_H
+#define _UAPI_LINUX_AUXVEC_H
+
+#include <asm/auxvec.h>
+
+/* Symbolic values for the entries in the auxiliary table
+ put on the initial stack */
+#define AT_NULL 0 /* end of vector */
+#define AT_IGNORE 1 /* entry should be ignored */
+#define AT_EXECFD 2 /* file descriptor of program */
+#define AT_PHDR 3 /* program headers for program */
+#define AT_PHENT 4 /* size of program header entry */
+#define AT_PHNUM 5 /* number of program headers */
+#define AT_PAGESZ 6 /* system page size */
+#define AT_BASE 7 /* base address of interpreter */
+#define AT_FLAGS 8 /* flags */
+#define AT_ENTRY 9 /* entry point of program */
+#define AT_NOTELF 10 /* program is not ELF */
+#define AT_UID 11 /* real uid */
+#define AT_EUID 12 /* effective uid */
+#define AT_GID 13 /* real gid */
+#define AT_EGID 14 /* effective gid */
+#define AT_PLATFORM 15 /* string identifying CPU for optimizations */
+#define AT_HWCAP 16 /* arch dependent hints at CPU capabilities */
+#define AT_CLKTCK 17 /* frequency at which times() increments */
+/* AT_* values 18 through 22 are reserved */
+#define AT_SECURE 23 /* secure mode boolean */
+#define AT_BASE_PLATFORM 24 /* string identifying real platform, may
+ * differ from AT_PLATFORM. */
+#define AT_RANDOM 25 /* address of 16 random bytes */
+
+#define AT_EXECFN 31 /* filename of program */
+
+
+#endif /* _UAPI_LINUX_AUXVEC_H */
diff --git a/include/linux/ax25.h b/include/uapi/linux/ax25.h
similarity index 100%
rename from include/linux/ax25.h
rename to include/uapi/linux/ax25.h
diff --git a/include/linux/b1lli.h b/include/uapi/linux/b1lli.h
similarity index 100%
rename from include/linux/b1lli.h
rename to include/uapi/linux/b1lli.h
diff --git a/include/linux/baycom.h b/include/uapi/linux/baycom.h
similarity index 100%
rename from include/linux/baycom.h
rename to include/uapi/linux/baycom.h
diff --git a/include/linux/bfs_fs.h b/include/uapi/linux/bfs_fs.h
similarity index 100%
rename from include/linux/bfs_fs.h
rename to include/uapi/linux/bfs_fs.h
diff --git a/include/uapi/linux/binfmts.h b/include/uapi/linux/binfmts.h
new file mode 100644
index 0000000..4eb5972
--- /dev/null
+++ b/include/uapi/linux/binfmts.h
@@ -0,0 +1,20 @@
+#ifndef _UAPI_LINUX_BINFMTS_H
+#define _UAPI_LINUX_BINFMTS_H
+
+#include <linux/capability.h>
+
+struct pt_regs;
+
+/*
+ * These are the maximum length and maximum number of strings passed to the
+ * execve() system call. MAX_ARG_STRLEN is essentially random but serves to
+ * prevent the kernel from being unduly impacted by misaddressed pointers.
+ * MAX_ARG_STRINGS is chosen to fit in a signed 32-bit integer.
+ */
+#define MAX_ARG_STRLEN (PAGE_SIZE * 32)
+#define MAX_ARG_STRINGS 0x7FFFFFFF
+
+/* sizeof(linux_binprm->buf) */
+#define BINPRM_BUF_SIZE 128
+
+#endif /* _UAPI_LINUX_BINFMTS_H */
diff --git a/include/linux/blkpg.h b/include/uapi/linux/blkpg.h
similarity index 100%
rename from include/linux/blkpg.h
rename to include/uapi/linux/blkpg.h
diff --git a/include/uapi/linux/blktrace_api.h b/include/uapi/linux/blktrace_api.h
new file mode 100644
index 0000000..c590ca6
--- /dev/null
+++ b/include/uapi/linux/blktrace_api.h
@@ -0,0 +1,142 @@
+#ifndef _UAPIBLKTRACE_H
+#define _UAPIBLKTRACE_H
+
+#include <linux/types.h>
+
+/*
+ * Trace categories
+ */
+enum blktrace_cat {
+ BLK_TC_READ = 1 << 0, /* reads */
+ BLK_TC_WRITE = 1 << 1, /* writes */
+ BLK_TC_FLUSH = 1 << 2, /* flush */
+ BLK_TC_SYNC = 1 << 3, /* sync IO */
+ BLK_TC_SYNCIO = BLK_TC_SYNC,
+ BLK_TC_QUEUE = 1 << 4, /* queueing/merging */
+ BLK_TC_REQUEUE = 1 << 5, /* requeueing */
+ BLK_TC_ISSUE = 1 << 6, /* issue */
+ BLK_TC_COMPLETE = 1 << 7, /* completions */
+ BLK_TC_FS = 1 << 8, /* fs requests */
+ BLK_TC_PC = 1 << 9, /* pc requests */
+ BLK_TC_NOTIFY = 1 << 10, /* special message */
+ BLK_TC_AHEAD = 1 << 11, /* readahead */
+ BLK_TC_META = 1 << 12, /* metadata */
+ BLK_TC_DISCARD = 1 << 13, /* discard requests */
+ BLK_TC_DRV_DATA = 1 << 14, /* binary per-driver data */
+ BLK_TC_FUA = 1 << 15, /* fua requests */
+
+ BLK_TC_END = 1 << 15, /* we've run out of bits! */
+};
+
+#define BLK_TC_SHIFT (16)
+#define BLK_TC_ACT(act) ((act) << BLK_TC_SHIFT)
+
+/*
+ * Basic trace actions
+ */
+enum blktrace_act {
+ __BLK_TA_QUEUE = 1, /* queued */
+ __BLK_TA_BACKMERGE, /* back merged to existing rq */
+ __BLK_TA_FRONTMERGE, /* front merge to existing rq */
+ __BLK_TA_GETRQ, /* allocated new request */
+ __BLK_TA_SLEEPRQ, /* sleeping on rq allocation */
+ __BLK_TA_REQUEUE, /* request requeued */
+ __BLK_TA_ISSUE, /* sent to driver */
+ __BLK_TA_COMPLETE, /* completed by driver */
+ __BLK_TA_PLUG, /* queue was plugged */
+ __BLK_TA_UNPLUG_IO, /* queue was unplugged by io */
+ __BLK_TA_UNPLUG_TIMER, /* queue was unplugged by timer */
+ __BLK_TA_INSERT, /* insert request */
+ __BLK_TA_SPLIT, /* bio was split */
+ __BLK_TA_BOUNCE, /* bio was bounced */
+ __BLK_TA_REMAP, /* bio was remapped */
+ __BLK_TA_ABORT, /* request aborted */
+ __BLK_TA_DRV_DATA, /* driver-specific binary data */
+};
+
+/*
+ * Notify events.
+ */
+enum blktrace_notify {
+ __BLK_TN_PROCESS = 0, /* establish pid/name mapping */
+ __BLK_TN_TIMESTAMP, /* include system clock */
+ __BLK_TN_MESSAGE, /* Character string message */
+};
+
+
+/*
+ * Trace actions in full. Additionally, read or write is masked
+ */
+#define BLK_TA_QUEUE (__BLK_TA_QUEUE | BLK_TC_ACT(BLK_TC_QUEUE))
+#define BLK_TA_BACKMERGE (__BLK_TA_BACKMERGE | BLK_TC_ACT(BLK_TC_QUEUE))
+#define BLK_TA_FRONTMERGE (__BLK_TA_FRONTMERGE | BLK_TC_ACT(BLK_TC_QUEUE))
+#define BLK_TA_GETRQ (__BLK_TA_GETRQ | BLK_TC_ACT(BLK_TC_QUEUE))
+#define BLK_TA_SLEEPRQ (__BLK_TA_SLEEPRQ | BLK_TC_ACT(BLK_TC_QUEUE))
+#define BLK_TA_REQUEUE (__BLK_TA_REQUEUE | BLK_TC_ACT(BLK_TC_REQUEUE))
+#define BLK_TA_ISSUE (__BLK_TA_ISSUE | BLK_TC_ACT(BLK_TC_ISSUE))
+#define BLK_TA_COMPLETE (__BLK_TA_COMPLETE| BLK_TC_ACT(BLK_TC_COMPLETE))
+#define BLK_TA_PLUG (__BLK_TA_PLUG | BLK_TC_ACT(BLK_TC_QUEUE))
+#define BLK_TA_UNPLUG_IO (__BLK_TA_UNPLUG_IO | BLK_TC_ACT(BLK_TC_QUEUE))
+#define BLK_TA_UNPLUG_TIMER (__BLK_TA_UNPLUG_TIMER | BLK_TC_ACT(BLK_TC_QUEUE))
+#define BLK_TA_INSERT (__BLK_TA_INSERT | BLK_TC_ACT(BLK_TC_QUEUE))
+#define BLK_TA_SPLIT (__BLK_TA_SPLIT)
+#define BLK_TA_BOUNCE (__BLK_TA_BOUNCE)
+#define BLK_TA_REMAP (__BLK_TA_REMAP | BLK_TC_ACT(BLK_TC_QUEUE))
+#define BLK_TA_ABORT (__BLK_TA_ABORT | BLK_TC_ACT(BLK_TC_QUEUE))
+#define BLK_TA_DRV_DATA (__BLK_TA_DRV_DATA | BLK_TC_ACT(BLK_TC_DRV_DATA))
+
+#define BLK_TN_PROCESS (__BLK_TN_PROCESS | BLK_TC_ACT(BLK_TC_NOTIFY))
+#define BLK_TN_TIMESTAMP (__BLK_TN_TIMESTAMP | BLK_TC_ACT(BLK_TC_NOTIFY))
+#define BLK_TN_MESSAGE (__BLK_TN_MESSAGE | BLK_TC_ACT(BLK_TC_NOTIFY))
+
+#define BLK_IO_TRACE_MAGIC 0x65617400
+#define BLK_IO_TRACE_VERSION 0x07
+
+/*
+ * The trace itself
+ */
+struct blk_io_trace {
+ __u32 magic; /* MAGIC << 8 | version */
+ __u32 sequence; /* event number */
+ __u64 time; /* in microseconds */
+ __u64 sector; /* disk offset */
+ __u32 bytes; /* transfer length */
+ __u32 action; /* what happened */
+ __u32 pid; /* who did it */
+ __u32 device; /* device number */
+ __u32 cpu; /* on what cpu did it happen */
+ __u16 error; /* completion error */
+ __u16 pdu_len; /* length of data after this trace */
+};
+
+/*
+ * The remap event
+ */
+struct blk_io_trace_remap {
+ __be32 device_from;
+ __be32 device_to;
+ __be64 sector_from;
+};
+
+enum {
+ Blktrace_setup = 1,
+ Blktrace_running,
+ Blktrace_stopped,
+};
+
+#define BLKTRACE_BDEV_SIZE 32
+
+/*
+ * User setup structure passed with BLKTRACESTART
+ */
+struct blk_user_trace_setup {
+ char name[BLKTRACE_BDEV_SIZE]; /* output */
+ __u16 act_mask; /* input */
+ __u32 buf_size; /* input */
+ __u32 buf_nr; /* input */
+ __u64 start_lba;
+ __u64 end_lba;
+ __u32 pid;
+};
+
+#endif /* _UAPIBLKTRACE_H */
diff --git a/include/linux/bpqether.h b/include/uapi/linux/bpqether.h
similarity index 100%
rename from include/linux/bpqether.h
rename to include/uapi/linux/bpqether.h
diff --git a/include/uapi/linux/bsg.h b/include/uapi/linux/bsg.h
new file mode 100644
index 0000000..7a12e1c
--- /dev/null
+++ b/include/uapi/linux/bsg.h
@@ -0,0 +1,65 @@
+#ifndef _UAPIBSG_H
+#define _UAPIBSG_H
+
+#include <linux/types.h>
+
+#define BSG_PROTOCOL_SCSI 0
+
+#define BSG_SUB_PROTOCOL_SCSI_CMD 0
+#define BSG_SUB_PROTOCOL_SCSI_TMF 1
+#define BSG_SUB_PROTOCOL_SCSI_TRANSPORT 2
+
+/*
+ * For flags member below
+ * sg.h sg_io_hdr also has bits defined for it's flags member. However
+ * none of these bits are implemented/used by bsg. The bits below are
+ * allocated to not conflict with sg.h ones anyway.
+ */
+#define BSG_FLAG_Q_AT_TAIL 0x10 /* default, == 0 at this bit, is Q_AT_HEAD */
+
+struct sg_io_v4 {
+ __s32 guard; /* [i] 'Q' to differentiate from v3 */
+ __u32 protocol; /* [i] 0 -> SCSI , .... */
+ __u32 subprotocol; /* [i] 0 -> SCSI command, 1 -> SCSI task
+ management function, .... */
+
+ __u32 request_len; /* [i] in bytes */
+ __u64 request; /* [i], [*i] {SCSI: cdb} */
+ __u64 request_tag; /* [i] {SCSI: task tag (only if flagged)} */
+ __u32 request_attr; /* [i] {SCSI: task attribute} */
+ __u32 request_priority; /* [i] {SCSI: task priority} */
+ __u32 request_extra; /* [i] {spare, for padding} */
+ __u32 max_response_len; /* [i] in bytes */
+ __u64 response; /* [i], [*o] {SCSI: (auto)sense data} */
+
+ /* "dout_": data out (to device); "din_": data in (from device) */
+ __u32 dout_iovec_count; /* [i] 0 -> "flat" dout transfer else
+ dout_xfer points to array of iovec */
+ __u32 dout_xfer_len; /* [i] bytes to be transferred to device */
+ __u32 din_iovec_count; /* [i] 0 -> "flat" din transfer */
+ __u32 din_xfer_len; /* [i] bytes to be transferred from device */
+ __u64 dout_xferp; /* [i], [*i] */
+ __u64 din_xferp; /* [i], [*o] */
+
+ __u32 timeout; /* [i] units: millisecond */
+ __u32 flags; /* [i] bit mask */
+ __u64 usr_ptr; /* [i->o] unused internally */
+ __u32 spare_in; /* [i] */
+
+ __u32 driver_status; /* [o] 0 -> ok */
+ __u32 transport_status; /* [o] 0 -> ok */
+ __u32 device_status; /* [o] {SCSI: command completion status} */
+ __u32 retry_delay; /* [o] {SCSI: status auxiliary information} */
+ __u32 info; /* [o] additional information */
+ __u32 duration; /* [o] time to complete, in milliseconds */
+ __u32 response_len; /* [o] bytes of response actually written */
+ __s32 din_resid; /* [o] din_xfer_len - actual_din_xfer_len */
+ __s32 dout_resid; /* [o] dout_xfer_len - actual_dout_xfer_len */
+ __u64 generated_tag; /* [o] {SCSI: transport generated task tag} */
+ __u32 spare_out; /* [o] */
+
+ __u32 padding;
+};
+
+
+#endif /* _UAPIBSG_H */
diff --git a/include/uapi/linux/byteorder/Kbuild b/include/uapi/linux/byteorder/Kbuild
index aafaa5a..619225b 100644
--- a/include/uapi/linux/byteorder/Kbuild
+++ b/include/uapi/linux/byteorder/Kbuild
@@ -1 +1,3 @@
# UAPI Header export list
+header-y += big_endian.h
+header-y += little_endian.h
diff --git a/include/uapi/linux/byteorder/big_endian.h b/include/uapi/linux/byteorder/big_endian.h
new file mode 100644
index 0000000..6723744
--- /dev/null
+++ b/include/uapi/linux/byteorder/big_endian.h
@@ -0,0 +1,105 @@
+#ifndef _UAPI_LINUX_BYTEORDER_BIG_ENDIAN_H
+#define _UAPI_LINUX_BYTEORDER_BIG_ENDIAN_H
+
+#ifndef __BIG_ENDIAN
+#define __BIG_ENDIAN 4321
+#endif
+#ifndef __BIG_ENDIAN_BITFIELD
+#define __BIG_ENDIAN_BITFIELD
+#endif
+
+#include <linux/types.h>
+#include <linux/swab.h>
+
+#define __constant_htonl(x) ((__force __be32)(__u32)(x))
+#define __constant_ntohl(x) ((__force __u32)(__be32)(x))
+#define __constant_htons(x) ((__force __be16)(__u16)(x))
+#define __constant_ntohs(x) ((__force __u16)(__be16)(x))
+#define __constant_cpu_to_le64(x) ((__force __le64)___constant_swab64((x)))
+#define __constant_le64_to_cpu(x) ___constant_swab64((__force __u64)(__le64)(x))
+#define __constant_cpu_to_le32(x) ((__force __le32)___constant_swab32((x)))
+#define __constant_le32_to_cpu(x) ___constant_swab32((__force __u32)(__le32)(x))
+#define __constant_cpu_to_le16(x) ((__force __le16)___constant_swab16((x)))
+#define __constant_le16_to_cpu(x) ___constant_swab16((__force __u16)(__le16)(x))
+#define __constant_cpu_to_be64(x) ((__force __be64)(__u64)(x))
+#define __constant_be64_to_cpu(x) ((__force __u64)(__be64)(x))
+#define __constant_cpu_to_be32(x) ((__force __be32)(__u32)(x))
+#define __constant_be32_to_cpu(x) ((__force __u32)(__be32)(x))
+#define __constant_cpu_to_be16(x) ((__force __be16)(__u16)(x))
+#define __constant_be16_to_cpu(x) ((__force __u16)(__be16)(x))
+#define __cpu_to_le64(x) ((__force __le64)__swab64((x)))
+#define __le64_to_cpu(x) __swab64((__force __u64)(__le64)(x))
+#define __cpu_to_le32(x) ((__force __le32)__swab32((x)))
+#define __le32_to_cpu(x) __swab32((__force __u32)(__le32)(x))
+#define __cpu_to_le16(x) ((__force __le16)__swab16((x)))
+#define __le16_to_cpu(x) __swab16((__force __u16)(__le16)(x))
+#define __cpu_to_be64(x) ((__force __be64)(__u64)(x))
+#define __be64_to_cpu(x) ((__force __u64)(__be64)(x))
+#define __cpu_to_be32(x) ((__force __be32)(__u32)(x))
+#define __be32_to_cpu(x) ((__force __u32)(__be32)(x))
+#define __cpu_to_be16(x) ((__force __be16)(__u16)(x))
+#define __be16_to_cpu(x) ((__force __u16)(__be16)(x))
+
+static inline __le64 __cpu_to_le64p(const __u64 *p)
+{
+ return (__force __le64)__swab64p(p);
+}
+static inline __u64 __le64_to_cpup(const __le64 *p)
+{
+ return __swab64p((__u64 *)p);
+}
+static inline __le32 __cpu_to_le32p(const __u32 *p)
+{
+ return (__force __le32)__swab32p(p);
+}
+static inline __u32 __le32_to_cpup(const __le32 *p)
+{
+ return __swab32p((__u32 *)p);
+}
+static inline __le16 __cpu_to_le16p(const __u16 *p)
+{
+ return (__force __le16)__swab16p(p);
+}
+static inline __u16 __le16_to_cpup(const __le16 *p)
+{
+ return __swab16p((__u16 *)p);
+}
+static inline __be64 __cpu_to_be64p(const __u64 *p)
+{
+ return (__force __be64)*p;
+}
+static inline __u64 __be64_to_cpup(const __be64 *p)
+{
+ return (__force __u64)*p;
+}
+static inline __be32 __cpu_to_be32p(const __u32 *p)
+{
+ return (__force __be32)*p;
+}
+static inline __u32 __be32_to_cpup(const __be32 *p)
+{
+ return (__force __u32)*p;
+}
+static inline __be16 __cpu_to_be16p(const __u16 *p)
+{
+ return (__force __be16)*p;
+}
+static inline __u16 __be16_to_cpup(const __be16 *p)
+{
+ return (__force __u16)*p;
+}
+#define __cpu_to_le64s(x) __swab64s((x))
+#define __le64_to_cpus(x) __swab64s((x))
+#define __cpu_to_le32s(x) __swab32s((x))
+#define __le32_to_cpus(x) __swab32s((x))
+#define __cpu_to_le16s(x) __swab16s((x))
+#define __le16_to_cpus(x) __swab16s((x))
+#define __cpu_to_be64s(x) do { (void)(x); } while (0)
+#define __be64_to_cpus(x) do { (void)(x); } while (0)
+#define __cpu_to_be32s(x) do { (void)(x); } while (0)
+#define __be32_to_cpus(x) do { (void)(x); } while (0)
+#define __cpu_to_be16s(x) do { (void)(x); } while (0)
+#define __be16_to_cpus(x) do { (void)(x); } while (0)
+
+
+#endif /* _UAPI_LINUX_BYTEORDER_BIG_ENDIAN_H */
diff --git a/include/uapi/linux/byteorder/little_endian.h b/include/uapi/linux/byteorder/little_endian.h
new file mode 100644
index 0000000..d876736
--- /dev/null
+++ b/include/uapi/linux/byteorder/little_endian.h
@@ -0,0 +1,105 @@
+#ifndef _UAPI_LINUX_BYTEORDER_LITTLE_ENDIAN_H
+#define _UAPI_LINUX_BYTEORDER_LITTLE_ENDIAN_H
+
+#ifndef __LITTLE_ENDIAN
+#define __LITTLE_ENDIAN 1234
+#endif
+#ifndef __LITTLE_ENDIAN_BITFIELD
+#define __LITTLE_ENDIAN_BITFIELD
+#endif
+
+#include <linux/types.h>
+#include <linux/swab.h>
+
+#define __constant_htonl(x) ((__force __be32)___constant_swab32((x)))
+#define __constant_ntohl(x) ___constant_swab32((__force __be32)(x))
+#define __constant_htons(x) ((__force __be16)___constant_swab16((x)))
+#define __constant_ntohs(x) ___constant_swab16((__force __be16)(x))
+#define __constant_cpu_to_le64(x) ((__force __le64)(__u64)(x))
+#define __constant_le64_to_cpu(x) ((__force __u64)(__le64)(x))
+#define __constant_cpu_to_le32(x) ((__force __le32)(__u32)(x))
+#define __constant_le32_to_cpu(x) ((__force __u32)(__le32)(x))
+#define __constant_cpu_to_le16(x) ((__force __le16)(__u16)(x))
+#define __constant_le16_to_cpu(x) ((__force __u16)(__le16)(x))
+#define __constant_cpu_to_be64(x) ((__force __be64)___constant_swab64((x)))
+#define __constant_be64_to_cpu(x) ___constant_swab64((__force __u64)(__be64)(x))
+#define __constant_cpu_to_be32(x) ((__force __be32)___constant_swab32((x)))
+#define __constant_be32_to_cpu(x) ___constant_swab32((__force __u32)(__be32)(x))
+#define __constant_cpu_to_be16(x) ((__force __be16)___constant_swab16((x)))
+#define __constant_be16_to_cpu(x) ___constant_swab16((__force __u16)(__be16)(x))
+#define __cpu_to_le64(x) ((__force __le64)(__u64)(x))
+#define __le64_to_cpu(x) ((__force __u64)(__le64)(x))
+#define __cpu_to_le32(x) ((__force __le32)(__u32)(x))
+#define __le32_to_cpu(x) ((__force __u32)(__le32)(x))
+#define __cpu_to_le16(x) ((__force __le16)(__u16)(x))
+#define __le16_to_cpu(x) ((__force __u16)(__le16)(x))
+#define __cpu_to_be64(x) ((__force __be64)__swab64((x)))
+#define __be64_to_cpu(x) __swab64((__force __u64)(__be64)(x))
+#define __cpu_to_be32(x) ((__force __be32)__swab32((x)))
+#define __be32_to_cpu(x) __swab32((__force __u32)(__be32)(x))
+#define __cpu_to_be16(x) ((__force __be16)__swab16((x)))
+#define __be16_to_cpu(x) __swab16((__force __u16)(__be16)(x))
+
+static inline __le64 __cpu_to_le64p(const __u64 *p)
+{
+ return (__force __le64)*p;
+}
+static inline __u64 __le64_to_cpup(const __le64 *p)
+{
+ return (__force __u64)*p;
+}
+static inline __le32 __cpu_to_le32p(const __u32 *p)
+{
+ return (__force __le32)*p;
+}
+static inline __u32 __le32_to_cpup(const __le32 *p)
+{
+ return (__force __u32)*p;
+}
+static inline __le16 __cpu_to_le16p(const __u16 *p)
+{
+ return (__force __le16)*p;
+}
+static inline __u16 __le16_to_cpup(const __le16 *p)
+{
+ return (__force __u16)*p;
+}
+static inline __be64 __cpu_to_be64p(const __u64 *p)
+{
+ return (__force __be64)__swab64p(p);
+}
+static inline __u64 __be64_to_cpup(const __be64 *p)
+{
+ return __swab64p((__u64 *)p);
+}
+static inline __be32 __cpu_to_be32p(const __u32 *p)
+{
+ return (__force __be32)__swab32p(p);
+}
+static inline __u32 __be32_to_cpup(const __be32 *p)
+{
+ return __swab32p((__u32 *)p);
+}
+static inline __be16 __cpu_to_be16p(const __u16 *p)
+{
+ return (__force __be16)__swab16p(p);
+}
+static inline __u16 __be16_to_cpup(const __be16 *p)
+{
+ return __swab16p((__u16 *)p);
+}
+#define __cpu_to_le64s(x) do { (void)(x); } while (0)
+#define __le64_to_cpus(x) do { (void)(x); } while (0)
+#define __cpu_to_le32s(x) do { (void)(x); } while (0)
+#define __le32_to_cpus(x) do { (void)(x); } while (0)
+#define __cpu_to_le16s(x) do { (void)(x); } while (0)
+#define __le16_to_cpus(x) do { (void)(x); } while (0)
+#define __cpu_to_be64s(x) __swab64s((x))
+#define __be64_to_cpus(x) __swab64s((x))
+#define __cpu_to_be32s(x) __swab32s((x))
+#define __be32_to_cpus(x) __swab32s((x))
+#define __cpu_to_be16s(x) __swab16s((x))
+#define __be16_to_cpus(x) __swab16s((x))
+
+
+#endif /* _UAPI_LINUX_BYTEORDER_LITTLE_ENDIAN_H */
diff --git a/include/linux/can.h b/include/uapi/linux/can.h
similarity index 100%
rename from include/linux/can.h
rename to include/uapi/linux/can.h
diff --git a/include/uapi/linux/capability.h b/include/uapi/linux/capability.h
new file mode 100644
index 0000000..ba478fa
--- /dev/null
+++ b/include/uapi/linux/capability.h
@@ -0,0 +1,358 @@
+/*
+ * This is <linux/capability.h>
+ *
+ * Andrew G. Morgan <morgan@kernel.org>
+ * Alexander Kjeldaas <astor@guardian.no>
+ * with help from Aleph1, Roland Buresund and Andrew Main.
+ *
+ * See here for the libcap library ("POSIX draft" compliance):
+ *
+ * ftp://www.kernel.org/pub/linux/libs/security/linux-privs/kernel-2.6/
+ */
+
+#ifndef _UAPI_LINUX_CAPABILITY_H
+#define _UAPI_LINUX_CAPABILITY_H
+
+#include <linux/types.h>
+
+struct task_struct;
+
+/* User-level do most of the mapping between kernel and user
+ capabilities based on the version tag given by the kernel. The
+ kernel might be somewhat backwards compatible, but don't bet on
+ it. */
+
+/* Note, cap_t, is defined by POSIX (draft) to be an "opaque" pointer to
+ a set of three capability sets. The transposition of 3*the
+ following structure to such a composite is better handled in a user
+ library since the draft standard requires the use of malloc/free
+ etc.. */
+
+#define _LINUX_CAPABILITY_VERSION_1 0x19980330
+#define _LINUX_CAPABILITY_U32S_1 1
+
+#define _LINUX_CAPABILITY_VERSION_2 0x20071026 /* deprecated - use v3 */
+#define _LINUX_CAPABILITY_U32S_2 2
+
+#define _LINUX_CAPABILITY_VERSION_3 0x20080522
+#define _LINUX_CAPABILITY_U32S_3 2
+
+typedef struct __user_cap_header_struct {
+ __u32 version;
+ int pid;
+} __user *cap_user_header_t;
+
+typedef struct __user_cap_data_struct {
+ __u32 effective;
+ __u32 permitted;
+ __u32 inheritable;
+} __user *cap_user_data_t;
+
+
+#define VFS_CAP_REVISION_MASK 0xFF000000
+#define VFS_CAP_REVISION_SHIFT 24
+#define VFS_CAP_FLAGS_MASK ~VFS_CAP_REVISION_MASK
+#define VFS_CAP_FLAGS_EFFECTIVE 0x000001
+
+#define VFS_CAP_REVISION_1 0x01000000
+#define VFS_CAP_U32_1 1
+#define XATTR_CAPS_SZ_1 (sizeof(__le32)*(1 + 2*VFS_CAP_U32_1))
+
+#define VFS_CAP_REVISION_2 0x02000000
+#define VFS_CAP_U32_2 2
+#define XATTR_CAPS_SZ_2 (sizeof(__le32)*(1 + 2*VFS_CAP_U32_2))
+
+#define XATTR_CAPS_SZ XATTR_CAPS_SZ_2
+#define VFS_CAP_U32 VFS_CAP_U32_2
+#define VFS_CAP_REVISION VFS_CAP_REVISION_2
+
+struct vfs_cap_data {
+ __le32 magic_etc; /* Little endian */
+ struct {
+ __le32 permitted; /* Little endian */
+ __le32 inheritable; /* Little endian */
+ } data[VFS_CAP_U32];
+};
+
+#ifndef __KERNEL__
+
+/*
+ * Backwardly compatible definition for source code - trapped in a
+ * 32-bit world. If you find you need this, please consider using
+ * libcap to untrap yourself...
+ */
+#define _LINUX_CAPABILITY_VERSION _LINUX_CAPABILITY_VERSION_1
+#define _LINUX_CAPABILITY_U32S _LINUX_CAPABILITY_U32S_1
+
+#endif
+
+
+/**
+ ** POSIX-draft defined capabilities.
+ **/
+
+/* In a system with the [_POSIX_CHOWN_RESTRICTED] option defined, this
+ overrides the restriction of changing file ownership and group
+ ownership. */
+
+#define CAP_CHOWN 0
+
+/* Override all DAC access, including ACL execute access if
+ [_POSIX_ACL] is defined. Excluding DAC access covered by
+ CAP_LINUX_IMMUTABLE. */
+
+#define CAP_DAC_OVERRIDE 1
+
+/* Overrides all DAC restrictions regarding read and search on files
+ and directories, including ACL restrictions if [_POSIX_ACL] is
+ defined. Excluding DAC access covered by CAP_LINUX_IMMUTABLE. */
+
+#define CAP_DAC_READ_SEARCH 2
+
+/* Overrides all restrictions about allowed operations on files, where
+ file owner ID must be equal to the user ID, except where CAP_FSETID
+ is applicable. It doesn't override MAC and DAC restrictions. */
+
+#define CAP_FOWNER 3
+
+/* Overrides the following restrictions that the effective user ID
+ shall match the file owner ID when setting the S_ISUID and S_ISGID
+ bits on that file; that the effective group ID (or one of the
+ supplementary group IDs) shall match the file owner ID when setting
+ the S_ISGID bit on that file; that the S_ISUID and S_ISGID bits are
+ cleared on successful return from chown(2) (not implemented). */
+
+#define CAP_FSETID 4
+
+/* Overrides the restriction that the real or effective user ID of a
+ process sending a signal must match the real or effective user ID
+ of the process receiving the signal. */
+
+#define CAP_KILL 5
+
+/* Allows setgid(2) manipulation */
+/* Allows setgroups(2) */
+/* Allows forged gids on socket credentials passing. */
+
+#define CAP_SETGID 6
+
+/* Allows set*uid(2) manipulation (including fsuid). */
+/* Allows forged pids on socket credentials passing. */
+
+#define CAP_SETUID 7
+
+
+/**
+ ** Linux-specific capabilities
+ **/
+
+/* Without VFS support for capabilities:
+ * Transfer any capability in your permitted set to any pid,
+ * remove any capability in your permitted set from any pid
+ * With VFS support for capabilities (neither of above, but)
+ * Add any capability from current's capability bounding set
+ * to the current process' inheritable set
+ * Allow taking bits out of capability bounding set
+ * Allow modification of the securebits for a process
+ */
+
+#define CAP_SETPCAP 8
+
+/* Allow modification of S_IMMUTABLE and S_APPEND file attributes */
+
+#define CAP_LINUX_IMMUTABLE 9
+
+/* Allows binding to TCP/UDP sockets below 1024 */
+/* Allows binding to ATM VCIs below 32 */
+
+#define CAP_NET_BIND_SERVICE 10
+
+/* Allow broadcasting, listen to multicast */
+
+#define CAP_NET_BROADCAST 11
+
+/* Allow interface configuration */
+/* Allow administration of IP firewall, masquerading and accounting */
+/* Allow setting debug option on sockets */
+/* Allow modification of routing tables */
+/* Allow setting arbitrary process / process group ownership on
+ sockets */
+/* Allow binding to any address for transparent proxying (also via NET_RAW) */
+/* Allow setting TOS (type of service) */
+/* Allow setting promiscuous mode */
+/* Allow clearing driver statistics */
+/* Allow multicasting */
+/* Allow read/write of device-specific registers */
+/* Allow activation of ATM control sockets */
+
+#define CAP_NET_ADMIN 12
+
+/* Allow use of RAW sockets */
+/* Allow use of PACKET sockets */
+/* Allow binding to any address for transparent proxying (also via NET_ADMIN) */
+
+#define CAP_NET_RAW 13
+
+/* Allow locking of shared memory segments */
+/* Allow mlock and mlockall (which doesn't really have anything to do
+ with IPC) */
+
+#define CAP_IPC_LOCK 14
+
+/* Override IPC ownership checks */
+
+#define CAP_IPC_OWNER 15
+
+/* Insert and remove kernel modules - modify kernel without limit */
+#define CAP_SYS_MODULE 16
+
+/* Allow ioperm/iopl access */
+/* Allow sending USB messages to any device via /proc/bus/usb */
+
+#define CAP_SYS_RAWIO 17
+
+/* Allow use of chroot() */
+
+#define CAP_SYS_CHROOT 18
+
+/* Allow ptrace() of any process */
+
+#define CAP_SYS_PTRACE 19
+
+/* Allow configuration of process accounting */
+
+#define CAP_SYS_PACCT 20
+
+/* Allow configuration of the secure attention key */
+/* Allow administration of the random device */
+/* Allow examination and configuration of disk quotas */
+/* Allow setting the domainname */
+/* Allow setting the hostname */
+/* Allow calling bdflush() */
+/* Allow mount() and umount(), setting up new smb connection */
+/* Allow some autofs root ioctls */
+/* Allow nfsservctl */
+/* Allow VM86_REQUEST_IRQ */
+/* Allow to read/write pci config on alpha */
+/* Allow irix_prctl on mips (setstacksize) */
+/* Allow flushing all cache on m68k (sys_cacheflush) */
+/* Allow removing semaphores */
+/* Used instead of CAP_CHOWN to "chown" IPC message queues, semaphores
+ and shared memory */
+/* Allow locking/unlocking of shared memory segment */
+/* Allow turning swap on/off */
+/* Allow forged pids on socket credentials passing */
+/* Allow setting readahead and flushing buffers on block devices */
+/* Allow setting geometry in floppy driver */
+/* Allow turning DMA on/off in xd driver */
+/* Allow administration of md devices (mostly the above, but some
+ extra ioctls) */
+/* Allow tuning the ide driver */
+/* Allow access to the nvram device */
+/* Allow administration of apm_bios, serial and bttv (TV) device */
+/* Allow manufacturer commands in isdn CAPI support driver */
+/* Allow reading non-standardized portions of pci configuration space */
+/* Allow DDI debug ioctl on sbpcd driver */
+/* Allow setting up serial ports */
+/* Allow sending raw qic-117 commands */
+/* Allow enabling/disabling tagged queuing on SCSI controllers and sending
+ arbitrary SCSI commands */
+/* Allow setting encryption key on loopback filesystem */
+/* Allow setting zone reclaim policy */
+
+#define CAP_SYS_ADMIN 21
+
+/* Allow use of reboot() */
+
+#define CAP_SYS_BOOT 22
+
+/* Allow raising priority and setting priority on other (different
+ UID) processes */
+/* Allow use of FIFO and round-robin (realtime) scheduling on own
+ processes and setting the scheduling algorithm used by another
+ process. */
+/* Allow setting cpu affinity on other processes */
+
+#define CAP_SYS_NICE 23
+
+/* Override resource limits. Set resource limits. */
+/* Override quota limits. */
+/* Override reserved space on ext2 filesystem */
+/* Modify data journaling mode on ext3 filesystem (uses journaling
+ resources) */
+/* NOTE: ext2 honors fsuid when checking for resource overrides, so
+ you can override using fsuid too */
+/* Override size restrictions on IPC message queues */
+/* Allow more than 64hz interrupts from the real-time clock */
+/* Override max number of consoles on console allocation */
+/* Override max number of keymaps */
+
+#define CAP_SYS_RESOURCE 24
+
+/* Allow manipulation of system clock */
+/* Allow irix_stime on mips */
+/* Allow setting the real-time clock */
+
+#define CAP_SYS_TIME 25
+
+/* Allow configuration of tty devices */
+/* Allow vhangup() of tty */
+
+#define CAP_SYS_TTY_CONFIG 26
+
+/* Allow the privileged aspects of mknod() */
+
+#define CAP_MKNOD 27
+
+/* Allow taking of leases on files */
+
+#define CAP_LEASE 28
+
+#define CAP_AUDIT_WRITE 29
+
+#define CAP_AUDIT_CONTROL 30
+
+#define CAP_SETFCAP 31
+
+/* Override MAC access.
+ The base kernel enforces no MAC policy.
+ An LSM may enforce a MAC policy, and if it does and it chooses
+ to implement capability based overrides of that policy, this is
+ the capability it should use to do so. */
+
+#define CAP_MAC_OVERRIDE 32
+
+/* Allow MAC configuration or state changes.
+ The base kernel requires no MAC configuration.
+ An LSM may enforce a MAC policy, and if it does and it chooses
+ to implement capability based checks on modifications to that
+ policy or the data required to maintain it, this is the
+ capability it should use to do so. */
+
+#define CAP_MAC_ADMIN 33
+
+/* Allow configuring the kernel's syslog (printk behaviour) */
+
+#define CAP_SYSLOG 34
+
+/* Allow triggering something that will wake the system */
+
+#define CAP_WAKE_ALARM 35
+
+/* Allow preventing system suspends */
+
+#define CAP_BLOCK_SUSPEND 36
+
+#define CAP_LAST_CAP CAP_BLOCK_SUSPEND
+
+#define cap_valid(x) ((x) >= 0 && (x) <= CAP_LAST_CAP)
+
+/*
+ * Bit location of each capability (used by user-space library and kernel)
+ */
+
+#define CAP_TO_INDEX(x) ((x) >> 5) /* 1 << 5 == bits in __u32 */
+#define CAP_TO_MASK(x) (1 << ((x) & 31)) /* mask for indexed __u32 */
+
+
+#endif /* _UAPI_LINUX_CAPABILITY_H */
diff --git a/include/linux/capi.h b/include/uapi/linux/capi.h
similarity index 100%
rename from include/linux/capi.h
rename to include/uapi/linux/capi.h
diff --git a/include/linux/cciss_defs.h b/include/uapi/linux/cciss_defs.h
similarity index 100%
rename from include/linux/cciss_defs.h
rename to include/uapi/linux/cciss_defs.h
diff --git a/include/uapi/linux/cciss_ioctl.h b/include/uapi/linux/cciss_ioctl.h
new file mode 100644
index 0000000..bb0b9dd
--- /dev/null
+++ b/include/uapi/linux/cciss_ioctl.h
@@ -0,0 +1,88 @@
+#ifndef _UAPICCISS_IOCTLH
+#define _UAPICCISS_IOCTLH
+
+#include <linux/types.h>
+#include <linux/ioctl.h>
+#include <linux/cciss_defs.h>
+
+#define CCISS_IOC_MAGIC 'B'
+
+
+typedef struct _cciss_pci_info_struct
+{
+ unsigned char bus;
+ unsigned char dev_fn;
+ unsigned short domain;
+ __u32 board_id;
+} cciss_pci_info_struct;
+
+typedef struct _cciss_coalint_struct
+{
+ __u32 delay;
+ __u32 count;
+} cciss_coalint_struct;
+
+typedef char NodeName_type[16];
+
+typedef __u32 Heartbeat_type;
+
+#define CISS_PARSCSIU2 0x0001
+#define CISS_PARCSCIU3 0x0002
+#define CISS_FIBRE1G 0x0100
+#define CISS_FIBRE2G 0x0200
+typedef __u32 BusTypes_type;
+
+typedef char FirmwareVer_type[4];
+typedef __u32 DriverVer_type;
+
+#define MAX_KMALLOC_SIZE 128000
+
+typedef struct _IOCTL_Command_struct {
+ LUNAddr_struct LUN_info;
+ RequestBlock_struct Request;
+ ErrorInfo_struct error_info;
+ WORD buf_size; /* size in bytes of the buf */
+ BYTE __user *buf;
+} IOCTL_Command_struct;
+
+typedef struct _BIG_IOCTL_Command_struct {
+ LUNAddr_struct LUN_info;
+ RequestBlock_struct Request;
+ ErrorInfo_struct error_info;
+ DWORD malloc_size; /* < MAX_KMALLOC_SIZE in cciss.c */
+ DWORD buf_size; /* size in bytes of the buf */
+ /* < malloc_size * MAXSGENTRIES */
+ BYTE __user *buf;
+} BIG_IOCTL_Command_struct;
+
+typedef struct _LogvolInfo_struct{
+ __u32 LunID;
+ int num_opens; /* number of opens on the logical volume */
+ int num_parts; /* number of partitions configured on logvol */
+} LogvolInfo_struct;
+
+#define CCISS_GETPCIINFO _IOR(CCISS_IOC_MAGIC, 1, cciss_pci_info_struct)
+
+#define CCISS_GETINTINFO _IOR(CCISS_IOC_MAGIC, 2, cciss_coalint_struct)
+#define CCISS_SETINTINFO _IOW(CCISS_IOC_MAGIC, 3, cciss_coalint_struct)
+
+#define CCISS_GETNODENAME _IOR(CCISS_IOC_MAGIC, 4, NodeName_type)
+#define CCISS_SETNODENAME _IOW(CCISS_IOC_MAGIC, 5, NodeName_type)
+
+#define CCISS_GETHEARTBEAT _IOR(CCISS_IOC_MAGIC, 6, Heartbeat_type)
+#define CCISS_GETBUSTYPES _IOR(CCISS_IOC_MAGIC, 7, BusTypes_type)
+#define CCISS_GETFIRMVER _IOR(CCISS_IOC_MAGIC, 8, FirmwareVer_type)
+#define CCISS_GETDRIVVER _IOR(CCISS_IOC_MAGIC, 9, DriverVer_type)
+#define CCISS_REVALIDVOLS _IO(CCISS_IOC_MAGIC, 10)
+#define CCISS_PASSTHRU _IOWR(CCISS_IOC_MAGIC, 11, IOCTL_Command_struct)
+#define CCISS_DEREGDISK _IO(CCISS_IOC_MAGIC, 12)
+
+/* no longer used... use REGNEWD instead */
+#define CCISS_REGNEWDISK _IOW(CCISS_IOC_MAGIC, 13, int)
+
+#define CCISS_REGNEWD _IO(CCISS_IOC_MAGIC, 14)
+#define CCISS_RESCANDISK _IO(CCISS_IOC_MAGIC, 16)
+#define CCISS_GETLUNINFO _IOR(CCISS_IOC_MAGIC, 17, LogvolInfo_struct)
+#define CCISS_BIG_PASSTHRU _IOWR(CCISS_IOC_MAGIC, 18, BIG_IOCTL_Command_struct)
+
+#endif /* _UAPICCISS_IOCTLH */
diff --git a/include/uapi/linux/cdrom.h b/include/uapi/linux/cdrom.h
new file mode 100644
index 0000000..898b866
--- /dev/null
+++ b/include/uapi/linux/cdrom.h
@@ -0,0 +1,912 @@
+/*
+ * -- <linux/cdrom.h>
+ * General header file for linux CD-ROM drivers
+ * Copyright (C) 1992 David Giller, rafetmad@oxy.edu
+ * 1994, 1995 Eberhard Mönkeberg, emoenke@gwdg.de
+ * 1996 David van Leeuwen, david@tm.tno.nl
+ * 1997, 1998 Erik Andersen, andersee@debian.org
+ * 1998-2002 Jens Axboe, axboe@suse.de
+ */
+
+#ifndef _UAPI_LINUX_CDROM_H
+#define _UAPI_LINUX_CDROM_H
+
+#include <linux/types.h>
+#include <asm/byteorder.h>
+
+/*******************************************************
+ * As of Linux 2.1.x, all Linux CD-ROM application programs will use this
+ * (and only this) include file. It is my hope to provide Linux with
+ * a uniform interface between software accessing CD-ROMs and the various
+ * device drivers that actually talk to the drives. There may still be
+ * 23 different kinds of strange CD-ROM drives, but at least there will
+ * now be one, and only one, Linux CD-ROM interface.
+ *
+ * Additionally, as of Linux 2.1.x, all Linux application programs
+ * should use the O_NONBLOCK option when opening a CD-ROM device
+ * for subsequent ioctl commands. This allows for neat system errors
+ * like "No medium found" or "Wrong medium type" upon attempting to
+ * mount or play an empty slot, mount an audio disc, or play a data disc.
+ * Generally, changing an application program to support O_NONBLOCK
+ * is as easy as the following:
+ * - drive = open("/dev/cdrom", O_RDONLY);
+ * + drive = open("/dev/cdrom", O_RDONLY | O_NONBLOCK);
+ * It is worth the small change.
+ *
+ * Patches for many common CD programs (provided by David A. van Leeuwen)
+ * can be found at: ftp://ftp.gwdg.de/pub/linux/cdrom/drivers/cm206/
+ *
+ *******************************************************/
+
+/* When a driver supports a certain function, but the cdrom drive we are
+ * using doesn't, we will return the error EDRIVE_CANT_DO_THIS. We will
+ * borrow the "Operation not supported" error from the network folks to
+ * accomplish this. Maybe someday we will get a more targeted error code,
+ * but this will do for now... */
+#define EDRIVE_CANT_DO_THIS EOPNOTSUPP
+
+/*******************************************************
+ * The CD-ROM IOCTL commands -- these should be supported by
+ * all the various cdrom drivers. For the CD-ROM ioctls, we
+ * will commandeer byte 0x53, or 'S'.
+ *******************************************************/
+#define CDROMPAUSE 0x5301 /* Pause Audio Operation */
+#define CDROMRESUME 0x5302 /* Resume paused Audio Operation */
+#define CDROMPLAYMSF 0x5303 /* Play Audio MSF (struct cdrom_msf) */
+#define CDROMPLAYTRKIND 0x5304 /* Play Audio Track/index
+ (struct cdrom_ti) */
+#define CDROMREADTOCHDR 0x5305 /* Read TOC header
+ (struct cdrom_tochdr) */
+#define CDROMREADTOCENTRY 0x5306 /* Read TOC entry
+ (struct cdrom_tocentry) */
+#define CDROMSTOP 0x5307 /* Stop the cdrom drive */
+#define CDROMSTART 0x5308 /* Start the cdrom drive */
+#define CDROMEJECT 0x5309 /* Ejects the cdrom media */
+#define CDROMVOLCTRL 0x530a /* Control output volume
+ (struct cdrom_volctrl) */
+#define CDROMSUBCHNL 0x530b /* Read subchannel data
+ (struct cdrom_subchnl) */
+#define CDROMREADMODE2 0x530c /* Read CDROM mode 2 data (2336 Bytes)
+ (struct cdrom_read) */
+#define CDROMREADMODE1 0x530d /* Read CDROM mode 1 data (2048 Bytes)
+ (struct cdrom_read) */
+#define CDROMREADAUDIO 0x530e /* (struct cdrom_read_audio) */
+#define CDROMEJECT_SW 0x530f /* enable(1)/disable(0) auto-ejecting */
+#define CDROMMULTISESSION 0x5310 /* Obtain the start-of-last-session
+ address of multi session disks
+ (struct cdrom_multisession) */
+#define CDROM_GET_MCN 0x5311 /* Obtain the "Universal Product Code"
+ if available (struct cdrom_mcn) */
+#define CDROM_GET_UPC CDROM_GET_MCN /* This one is deprecated,
+ but here anyway for compatibility */
+#define CDROMRESET 0x5312 /* hard-reset the drive */
+#define CDROMVOLREAD 0x5313 /* Get the drive's volume setting
+ (struct cdrom_volctrl) */
+#define CDROMREADRAW 0x5314 /* read data in raw mode (2352 Bytes)
+ (struct cdrom_read) */
+/*
+ * These ioctls are used only used in aztcd.c and optcd.c
+ */
+#define CDROMREADCOOKED 0x5315 /* read data in cooked mode */
+#define CDROMSEEK 0x5316 /* seek msf address */
+
+/*
+ * This ioctl is only used by the scsi-cd driver.
+ It is for playing audio in logical block addressing mode.
+ */
+#define CDROMPLAYBLK 0x5317 /* (struct cdrom_blk) */
+
+/*
+ * These ioctls are only used in optcd.c
+ */
+#define CDROMREADALL 0x5318 /* read all 2646 bytes */
+
+/*
+ * These ioctls are (now) only in ide-cd.c for controlling
+ * drive spindown time. They should be implemented in the
+ * Uniform driver, via generic packet commands, GPCMD_MODE_SELECT_10,
+ * GPCMD_MODE_SENSE_10 and the GPMODE_POWER_PAGE...
+ * -Erik
+ */
+#define CDROMGETSPINDOWN 0x531d
+#define CDROMSETSPINDOWN 0x531e
+
+/*
+ * These ioctls are implemented through the uniform CD-ROM driver
+ * They _will_ be adopted by all CD-ROM drivers, when all the CD-ROM
+ * drivers are eventually ported to the uniform CD-ROM driver interface.
+ */
+#define CDROMCLOSETRAY 0x5319 /* pendant of CDROMEJECT */
+#define CDROM_SET_OPTIONS 0x5320 /* Set behavior options */
+#define CDROM_CLEAR_OPTIONS 0x5321 /* Clear behavior options */
+#define CDROM_SELECT_SPEED 0x5322 /* Set the CD-ROM speed */
+#define CDROM_SELECT_DISC 0x5323 /* Select disc (for juke-boxes) */
+#define CDROM_MEDIA_CHANGED 0x5325 /* Check is media changed */
+#define CDROM_DRIVE_STATUS 0x5326 /* Get tray position, etc. */
+#define CDROM_DISC_STATUS 0x5327 /* Get disc type, etc. */
+#define CDROM_CHANGER_NSLOTS 0x5328 /* Get number of slots */
+#define CDROM_LOCKDOOR 0x5329 /* lock or unlock door */
+#define CDROM_DEBUG 0x5330 /* Turn debug messages on/off */
+#define CDROM_GET_CAPABILITY 0x5331 /* get capabilities */
+
+/* Note that scsi/scsi_ioctl.h also uses 0x5382 - 0x5386.
+ * Future CDROM ioctls should be kept below 0x537F
+ */
+
+/* This ioctl is only used by sbpcd at the moment */
+#define CDROMAUDIOBUFSIZ 0x5382 /* set the audio buffer size */
+ /* conflict with SCSI_IOCTL_GET_IDLUN */
+
+/* DVD-ROM Specific ioctls */
+#define DVD_READ_STRUCT 0x5390 /* Read structure */
+#define DVD_WRITE_STRUCT 0x5391 /* Write structure */
+#define DVD_AUTH 0x5392 /* Authentication */
+
+#define CDROM_SEND_PACKET 0x5393 /* send a packet to the drive */
+#define CDROM_NEXT_WRITABLE 0x5394 /* get next writable block */
+#define CDROM_LAST_WRITTEN 0x5395 /* get last block written on disc */
+
+/*******************************************************
+ * CDROM IOCTL structures
+ *******************************************************/
+
+/* Address in MSF format */
+struct cdrom_msf0
+{
+ __u8 minute;
+ __u8 second;
+ __u8 frame;
+};
+
+/* Address in either MSF or logical format */
+union cdrom_addr
+{
+ struct cdrom_msf0 msf;
+ int lba;
+};
+
+/* This struct is used by the CDROMPLAYMSF ioctl */
+struct cdrom_msf
+{
+ __u8 cdmsf_min0; /* start minute */
+ __u8 cdmsf_sec0; /* start second */
+ __u8 cdmsf_frame0; /* start frame */
+ __u8 cdmsf_min1; /* end minute */
+ __u8 cdmsf_sec1; /* end second */
+ __u8 cdmsf_frame1; /* end frame */
+};
+
+/* This struct is used by the CDROMPLAYTRKIND ioctl */
+struct cdrom_ti
+{
+ __u8 cdti_trk0; /* start track */
+ __u8 cdti_ind0; /* start index */
+ __u8 cdti_trk1; /* end track */
+ __u8 cdti_ind1; /* end index */
+};
+
+/* This struct is used by the CDROMREADTOCHDR ioctl */
+struct cdrom_tochdr
+{
+ __u8 cdth_trk0; /* start track */
+ __u8 cdth_trk1; /* end track */
+};
+
+/* This struct is used by the CDROMVOLCTRL and CDROMVOLREAD ioctls */
+struct cdrom_volctrl
+{
+ __u8 channel0;
+ __u8 channel1;
+ __u8 channel2;
+ __u8 channel3;
+};
+
+/* This struct is used by the CDROMSUBCHNL ioctl */
+struct cdrom_subchnl
+{
+ __u8 cdsc_format;
+ __u8 cdsc_audiostatus;
+ __u8 cdsc_adr: 4;
+ __u8 cdsc_ctrl: 4;
+ __u8 cdsc_trk;
+ __u8 cdsc_ind;
+ union cdrom_addr cdsc_absaddr;
+ union cdrom_addr cdsc_reladdr;
+};
+
+
+/* This struct is used by the CDROMREADTOCENTRY ioctl */
+struct cdrom_tocentry
+{
+ __u8 cdte_track;
+ __u8 cdte_adr :4;
+ __u8 cdte_ctrl :4;
+ __u8 cdte_format;
+ union cdrom_addr cdte_addr;
+ __u8 cdte_datamode;
+};
+
+/* This struct is used by the CDROMREADMODE1, and CDROMREADMODE2 ioctls */
+struct cdrom_read
+{
+ int cdread_lba;
+ char *cdread_bufaddr;
+ int cdread_buflen;
+};
+
+/* This struct is used by the CDROMREADAUDIO ioctl */
+struct cdrom_read_audio
+{
+ union cdrom_addr addr; /* frame address */
+ __u8 addr_format; /* CDROM_LBA or CDROM_MSF */
+ int nframes; /* number of 2352-byte-frames to read at once */
+ __u8 __user *buf; /* frame buffer (size: nframes*2352 bytes) */
+};
+
+/* This struct is used with the CDROMMULTISESSION ioctl */
+struct cdrom_multisession
+{
+ union cdrom_addr addr; /* frame address: start-of-last-session
+ (not the new "frame 16"!). Only valid
+ if the "xa_flag" is true. */
+ __u8 xa_flag; /* 1: "is XA disk" */
+ __u8 addr_format; /* CDROM_LBA or CDROM_MSF */
+};
+
+/* This struct is used with the CDROM_GET_MCN ioctl.
+ * Very few audio discs actually have Universal Product Code information,
+ * which should just be the Medium Catalog Number on the box. Also note
+ * that the way the codeis written on CD is _not_ uniform across all discs!
+ */
+struct cdrom_mcn
+{
+ __u8 medium_catalog_number[14]; /* 13 ASCII digits, null-terminated */
+};
+
+/* This is used by the CDROMPLAYBLK ioctl */
+struct cdrom_blk
+{
+ unsigned from;
+ unsigned short len;
+};
+
+#define CDROM_PACKET_SIZE 12
+
+#define CGC_DATA_UNKNOWN 0
+#define CGC_DATA_WRITE 1
+#define CGC_DATA_READ 2
+#define CGC_DATA_NONE 3
+
+/* for CDROM_PACKET_COMMAND ioctl */
+struct cdrom_generic_command
+{
+ unsigned char cmd[CDROM_PACKET_SIZE];
+ unsigned char __user *buffer;
+ unsigned int buflen;
+ int stat;
+ struct request_sense __user *sense;
+ unsigned char data_direction;
+ int quiet;
+ int timeout;
+ void __user *reserved[1]; /* unused, actually */
+};
+
+/*
+ * A CD-ROM physical sector size is 2048, 2052, 2056, 2324, 2332, 2336,
+ * 2340, or 2352 bytes long.
+
+* Sector types of the standard CD-ROM data formats:
+ *
+ * format sector type user data size (bytes)
+ * -----------------------------------------------------------------------------
+ * 1 (Red Book) CD-DA 2352 (CD_FRAMESIZE_RAW)
+ * 2 (Yellow Book) Mode1 Form1 2048 (CD_FRAMESIZE)
+ * 3 (Yellow Book) Mode1 Form2 2336 (CD_FRAMESIZE_RAW0)
+ * 4 (Green Book) Mode2 Form1 2048 (CD_FRAMESIZE)
+ * 5 (Green Book) Mode2 Form2 2328 (2324+4 spare bytes)
+ *
+ *
+ * The layout of the standard CD-ROM data formats:
+ * -----------------------------------------------------------------------------
+ * - audio (red): | audio_sample_bytes |
+ * | 2352 |
+ *
+ * - data (yellow, mode1): | sync - head - data - EDC - zero - ECC |
+ * | 12 - 4 - 2048 - 4 - 8 - 276 |
+ *
+ * - data (yellow, mode2): | sync - head - data |
+ * | 12 - 4 - 2336 |
+ *
+ * - XA data (green, mode2 form1): | sync - head - sub - data - EDC - ECC |
+ * | 12 - 4 - 8 - 2048 - 4 - 276 |
+ *
+ * - XA data (green, mode2 form2): | sync - head - sub - data - Spare |
+ * | 12 - 4 - 8 - 2324 - 4 |
+ *
+ */
+
+/* Some generally useful CD-ROM information -- mostly based on the above */
+#define CD_MINS 74 /* max. minutes per CD, not really a limit */
+#define CD_SECS 60 /* seconds per minute */
+#define CD_FRAMES 75 /* frames per second */
+#define CD_SYNC_SIZE 12 /* 12 sync bytes per raw data frame */
+#define CD_MSF_OFFSET 150 /* MSF numbering offset of first frame */
+#define CD_CHUNK_SIZE 24 /* lowest-level "data bytes piece" */
+#define CD_NUM_OF_CHUNKS 98 /* chunks per frame */
+#define CD_FRAMESIZE_SUB 96 /* subchannel data "frame" size */
+#define CD_HEAD_SIZE 4 /* header (address) bytes per raw data frame */
+#define CD_SUBHEAD_SIZE 8 /* subheader bytes per raw XA data frame */
+#define CD_EDC_SIZE 4 /* bytes EDC per most raw data frame types */
+#define CD_ZERO_SIZE 8 /* bytes zero per yellow book mode 1 frame */
+#define CD_ECC_SIZE 276 /* bytes ECC per most raw data frame types */
+#define CD_FRAMESIZE 2048 /* bytes per frame, "cooked" mode */
+#define CD_FRAMESIZE_RAW 2352 /* bytes per frame, "raw" mode */
+#define CD_FRAMESIZE_RAWER 2646 /* The maximum possible returned bytes */
+/* most drives don't deliver everything: */
+#define CD_FRAMESIZE_RAW1 (CD_FRAMESIZE_RAW-CD_SYNC_SIZE) /*2340*/
+#define CD_FRAMESIZE_RAW0 (CD_FRAMESIZE_RAW-CD_SYNC_SIZE-CD_HEAD_SIZE) /*2336*/
+
+#define CD_XA_HEAD (CD_HEAD_SIZE+CD_SUBHEAD_SIZE) /* "before data" part of raw XA frame */
+#define CD_XA_TAIL (CD_EDC_SIZE+CD_ECC_SIZE) /* "after data" part of raw XA frame */
+#define CD_XA_SYNC_HEAD (CD_SYNC_SIZE+CD_XA_HEAD) /* sync bytes + header of XA frame */
+
+/* CD-ROM address types (cdrom_tocentry.cdte_format) */
+#define CDROM_LBA 0x01 /* "logical block": first frame is #0 */
+#define CDROM_MSF 0x02 /* "minute-second-frame": binary, not bcd here! */
+
+/* bit to tell whether track is data or audio (cdrom_tocentry.cdte_ctrl) */
+#define CDROM_DATA_TRACK 0x04
+
+/* The leadout track is always 0xAA, regardless of # of tracks on disc */
+#define CDROM_LEADOUT 0xAA
+
+/* audio states (from SCSI-2, but seen with other drives, too) */
+#define CDROM_AUDIO_INVALID 0x00 /* audio status not supported */
+#define CDROM_AUDIO_PLAY 0x11 /* audio play operation in progress */
+#define CDROM_AUDIO_PAUSED 0x12 /* audio play operation paused */
+#define CDROM_AUDIO_COMPLETED 0x13 /* audio play successfully completed */
+#define CDROM_AUDIO_ERROR 0x14 /* audio play stopped due to error */
+#define CDROM_AUDIO_NO_STATUS 0x15 /* no current audio status to return */
+
+/* capability flags used with the uniform CD-ROM driver */
+#define CDC_CLOSE_TRAY 0x1 /* caddy systems _can't_ close */
+#define CDC_OPEN_TRAY 0x2 /* but _can_ eject. */
+#define CDC_LOCK 0x4 /* disable manual eject */
+#define CDC_SELECT_SPEED 0x8 /* programmable speed */
+#define CDC_SELECT_DISC 0x10 /* select disc from juke-box */
+#define CDC_MULTI_SESSION 0x20 /* read sessions>1 */
+#define CDC_MCN 0x40 /* Medium Catalog Number */
+#define CDC_MEDIA_CHANGED 0x80 /* media changed */
+#define CDC_PLAY_AUDIO 0x100 /* audio functions */
+#define CDC_RESET 0x200 /* hard reset device */
+#define CDC_DRIVE_STATUS 0x800 /* driver implements drive status */
+#define CDC_GENERIC_PACKET 0x1000 /* driver implements generic packets */
+#define CDC_CD_R 0x2000 /* drive is a CD-R */
+#define CDC_CD_RW 0x4000 /* drive is a CD-RW */
+#define CDC_DVD 0x8000 /* drive is a DVD */
+#define CDC_DVD_R 0x10000 /* drive can write DVD-R */
+#define CDC_DVD_RAM 0x20000 /* drive can write DVD-RAM */
+#define CDC_MO_DRIVE 0x40000 /* drive is an MO device */
+#define CDC_MRW 0x80000 /* drive can read MRW */
+#define CDC_MRW_W 0x100000 /* drive can write MRW */
+#define CDC_RAM 0x200000 /* ok to open for WRITE */
+
+/* drive status possibilities returned by CDROM_DRIVE_STATUS ioctl */
+#define CDS_NO_INFO 0 /* if not implemented */
+#define CDS_NO_DISC 1
+#define CDS_TRAY_OPEN 2
+#define CDS_DRIVE_NOT_READY 3
+#define CDS_DISC_OK 4
+
+/* return values for the CDROM_DISC_STATUS ioctl */
+/* can also return CDS_NO_[INFO|DISC], from above */
+#define CDS_AUDIO 100
+#define CDS_DATA_1 101
+#define CDS_DATA_2 102
+#define CDS_XA_2_1 103
+#define CDS_XA_2_2 104
+#define CDS_MIXED 105
+
+/* User-configurable behavior options for the uniform CD-ROM driver */
+#define CDO_AUTO_CLOSE 0x1 /* close tray on first open() */
+#define CDO_AUTO_EJECT 0x2 /* open tray on last release() */
+#define CDO_USE_FFLAGS 0x4 /* use O_NONBLOCK information on open */
+#define CDO_LOCK 0x8 /* lock tray on open files */
+#define CDO_CHECK_TYPE 0x10 /* check type on open for data */
+
+/* Special codes used when specifying changer slots. */
+#define CDSL_NONE (INT_MAX-1)
+#define CDSL_CURRENT INT_MAX
+
+/* For partition based multisession access. IDE can handle 64 partitions
+ * per drive - SCSI CD-ROM's use minors to differentiate between the
+ * various drives, so we can't do multisessions the same way there.
+ * Use the -o session=x option to mount on them.
+ */
+#define CD_PART_MAX 64
+#define CD_PART_MASK (CD_PART_MAX - 1)
+
+/*********************************************************************
+ * Generic Packet commands, MMC commands, and such
+ *********************************************************************/
+
+ /* The generic packet command opcodes for CD/DVD Logical Units,
+ * From Table 57 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */
+#define GPCMD_BLANK 0xa1
+#define GPCMD_CLOSE_TRACK 0x5b
+#define GPCMD_FLUSH_CACHE 0x35
+#define GPCMD_FORMAT_UNIT 0x04
+#define GPCMD_GET_CONFIGURATION 0x46
+#define GPCMD_GET_EVENT_STATUS_NOTIFICATION 0x4a
+#define GPCMD_GET_PERFORMANCE 0xac
+#define GPCMD_INQUIRY 0x12
+#define GPCMD_LOAD_UNLOAD 0xa6
+#define GPCMD_MECHANISM_STATUS 0xbd
+#define GPCMD_MODE_SELECT_10 0x55
+#define GPCMD_MODE_SENSE_10 0x5a
+#define GPCMD_PAUSE_RESUME 0x4b
+#define GPCMD_PLAY_AUDIO_10 0x45
+#define GPCMD_PLAY_AUDIO_MSF 0x47
+#define GPCMD_PLAY_AUDIO_TI 0x48
+#define GPCMD_PLAY_CD 0xbc
+#define GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL 0x1e
+#define GPCMD_READ_10 0x28
+#define GPCMD_READ_12 0xa8
+#define GPCMD_READ_BUFFER 0x3c
+#define GPCMD_READ_BUFFER_CAPACITY 0x5c
+#define GPCMD_READ_CDVD_CAPACITY 0x25
+#define GPCMD_READ_CD 0xbe
+#define GPCMD_READ_CD_MSF 0xb9
+#define GPCMD_READ_DISC_INFO 0x51
+#define GPCMD_READ_DVD_STRUCTURE 0xad
+#define GPCMD_READ_FORMAT_CAPACITIES 0x23
+#define GPCMD_READ_HEADER 0x44
+#define GPCMD_READ_TRACK_RZONE_INFO 0x52
+#define GPCMD_READ_SUBCHANNEL 0x42
+#define GPCMD_READ_TOC_PMA_ATIP 0x43
+#define GPCMD_REPAIR_RZONE_TRACK 0x58
+#define GPCMD_REPORT_KEY 0xa4
+#define GPCMD_REQUEST_SENSE 0x03
+#define GPCMD_RESERVE_RZONE_TRACK 0x53
+#define GPCMD_SEND_CUE_SHEET 0x5d
+#define GPCMD_SCAN 0xba
+#define GPCMD_SEEK 0x2b
+#define GPCMD_SEND_DVD_STRUCTURE 0xbf
+#define GPCMD_SEND_EVENT 0xa2
+#define GPCMD_SEND_KEY 0xa3
+#define GPCMD_SEND_OPC 0x54
+#define GPCMD_SET_READ_AHEAD 0xa7
+#define GPCMD_SET_STREAMING 0xb6
+#define GPCMD_START_STOP_UNIT 0x1b
+#define GPCMD_STOP_PLAY_SCAN 0x4e
+#define GPCMD_TEST_UNIT_READY 0x00
+#define GPCMD_VERIFY_10 0x2f
+#define GPCMD_WRITE_10 0x2a
+#define GPCMD_WRITE_12 0xaa
+#define GPCMD_WRITE_AND_VERIFY_10 0x2e
+#define GPCMD_WRITE_BUFFER 0x3b
+/* This is listed as optional in ATAPI 2.6, but is (curiously)
+ * missing from Mt. Fuji, Table 57. It _is_ mentioned in Mt. Fuji
+ * Table 377 as an MMC command for SCSi devices though... Most ATAPI
+ * drives support it. */
+#define GPCMD_SET_SPEED 0xbb
+/* This seems to be a SCSI specific CD-ROM opcode
+ * to play data at track/index */
+#define GPCMD_PLAYAUDIO_TI 0x48
+/*
+ * From MS Media Status Notification Support Specification. For
+ * older drives only.
+ */
+#define GPCMD_GET_MEDIA_STATUS 0xda
+
+/* Mode page codes for mode sense/set */
+#define GPMODE_VENDOR_PAGE 0x00
+#define GPMODE_R_W_ERROR_PAGE 0x01
+#define GPMODE_WRITE_PARMS_PAGE 0x05
+#define GPMODE_WCACHING_PAGE 0x08
+#define GPMODE_AUDIO_CTL_PAGE 0x0e
+#define GPMODE_POWER_PAGE 0x1a
+#define GPMODE_FAULT_FAIL_PAGE 0x1c
+#define GPMODE_TO_PROTECT_PAGE 0x1d
+#define GPMODE_CAPABILITIES_PAGE 0x2a
+#define GPMODE_ALL_PAGES 0x3f
+/* Not in Mt. Fuji, but in ATAPI 2.6 -- deprecated now in favor
+ * of MODE_SENSE_POWER_PAGE */
+#define GPMODE_CDROM_PAGE 0x0d
+
+
+
+/* DVD struct types */
+#define DVD_STRUCT_PHYSICAL 0x00
+#define DVD_STRUCT_COPYRIGHT 0x01
+#define DVD_STRUCT_DISCKEY 0x02
+#define DVD_STRUCT_BCA 0x03
+#define DVD_STRUCT_MANUFACT 0x04
+
+struct dvd_layer {
+ __u8 book_version : 4;
+ __u8 book_type : 4;
+ __u8 min_rate : 4;
+ __u8 disc_size : 4;
+ __u8 layer_type : 4;
+ __u8 track_path : 1;
+ __u8 nlayers : 2;
+ __u8 track_density : 4;
+ __u8 linear_density : 4;
+ __u8 bca : 1;
+ __u32 start_sector;
+ __u32 end_sector;
+ __u32 end_sector_l0;
+};
+
+#define DVD_LAYERS 4
+
+struct dvd_physical {
+ __u8 type;
+ __u8 layer_num;
+ struct dvd_layer layer[DVD_LAYERS];
+};
+
+struct dvd_copyright {
+ __u8 type;
+
+ __u8 layer_num;
+ __u8 cpst;
+ __u8 rmi;
+};
+
+struct dvd_disckey {
+ __u8 type;
+
+ unsigned agid : 2;
+ __u8 value[2048];
+};
+
+struct dvd_bca {
+ __u8 type;
+
+ int len;
+ __u8 value[188];
+};
+
+struct dvd_manufact {
+ __u8 type;
+
+ __u8 layer_num;
+ int len;
+ __u8 value[2048];
+};
+
+typedef union {
+ __u8 type;
+
+ struct dvd_physical physical;
+ struct dvd_copyright copyright;
+ struct dvd_disckey disckey;
+ struct dvd_bca bca;
+ struct dvd_manufact manufact;
+} dvd_struct;
+
+/*
+ * DVD authentication ioctl
+ */
+
+/* Authentication states */
+#define DVD_LU_SEND_AGID 0
+#define DVD_HOST_SEND_CHALLENGE 1
+#define DVD_LU_SEND_KEY1 2
+#define DVD_LU_SEND_CHALLENGE 3
+#define DVD_HOST_SEND_KEY2 4
+
+/* Termination states */
+#define DVD_AUTH_ESTABLISHED 5
+#define DVD_AUTH_FAILURE 6
+
+/* Other functions */
+#define DVD_LU_SEND_TITLE_KEY 7
+#define DVD_LU_SEND_ASF 8
+#define DVD_INVALIDATE_AGID 9
+#define DVD_LU_SEND_RPC_STATE 10
+#define DVD_HOST_SEND_RPC_STATE 11
+
+/* State data */
+typedef __u8 dvd_key[5]; /* 40-bit value, MSB is first elem. */
+typedef __u8 dvd_challenge[10]; /* 80-bit value, MSB is first elem. */
+
+struct dvd_lu_send_agid {
+ __u8 type;
+ unsigned agid : 2;
+};
+
+struct dvd_host_send_challenge {
+ __u8 type;
+ unsigned agid : 2;
+
+ dvd_challenge chal;
+};
+
+struct dvd_send_key {
+ __u8 type;
+ unsigned agid : 2;
+
+ dvd_key key;
+};
+
+struct dvd_lu_send_challenge {
+ __u8 type;
+ unsigned agid : 2;
+
+ dvd_challenge chal;
+};
+
+#define DVD_CPM_NO_COPYRIGHT 0
+#define DVD_CPM_COPYRIGHTED 1
+
+#define DVD_CP_SEC_NONE 0
+#define DVD_CP_SEC_EXIST 1
+
+#define DVD_CGMS_UNRESTRICTED 0
+#define DVD_CGMS_SINGLE 2
+#define DVD_CGMS_RESTRICTED 3
+
+struct dvd_lu_send_title_key {
+ __u8 type;
+ unsigned agid : 2;
+
+ dvd_key title_key;
+ int lba;
+ unsigned cpm : 1;
+ unsigned cp_sec : 1;
+ unsigned cgms : 2;
+};
+
+struct dvd_lu_send_asf {
+ __u8 type;
+ unsigned agid : 2;
+
+ unsigned asf : 1;
+};
+
+struct dvd_host_send_rpcstate {
+ __u8 type;
+ __u8 pdrc;
+};
+
+struct dvd_lu_send_rpcstate {
+ __u8 type : 2;
+ __u8 vra : 3;
+ __u8 ucca : 3;
+ __u8 region_mask;
+ __u8 rpc_scheme;
+};
+
+typedef union {
+ __u8 type;
+
+ struct dvd_lu_send_agid lsa;
+ struct dvd_host_send_challenge hsc;
+ struct dvd_send_key lsk;
+ struct dvd_lu_send_challenge lsc;
+ struct dvd_send_key hsk;
+ struct dvd_lu_send_title_key lstk;
+ struct dvd_lu_send_asf lsasf;
+ struct dvd_host_send_rpcstate hrpcs;
+ struct dvd_lu_send_rpcstate lrpcs;
+} dvd_authinfo;
+
+struct request_sense {
+#if defined(__BIG_ENDIAN_BITFIELD)
+ __u8 valid : 1;
+ __u8 error_code : 7;
+#elif defined(__LITTLE_ENDIAN_BITFIELD)
+ __u8 error_code : 7;
+ __u8 valid : 1;
+#endif
+ __u8 segment_number;
+#if defined(__BIG_ENDIAN_BITFIELD)
+ __u8 reserved1 : 2;
+ __u8 ili : 1;
+ __u8 reserved2 : 1;
+ __u8 sense_key : 4;
+#elif defined(__LITTLE_ENDIAN_BITFIELD)
+ __u8 sense_key : 4;
+ __u8 reserved2 : 1;
+ __u8 ili : 1;
+ __u8 reserved1 : 2;
+#endif
+ __u8 information[4];
+ __u8 add_sense_len;
+ __u8 command_info[4];
+ __u8 asc;
+ __u8 ascq;
+ __u8 fruc;
+ __u8 sks[3];
+ __u8 asb[46];
+};
+
+/*
+ * feature profile
+ */
+#define CDF_RWRT 0x0020 /* "Random Writable" */
+#define CDF_HWDM 0x0024 /* "Hardware Defect Management" */
+#define CDF_MRW 0x0028
+
+/*
+ * media status bits
+ */
+#define CDM_MRW_NOTMRW 0
+#define CDM_MRW_BGFORMAT_INACTIVE 1
+#define CDM_MRW_BGFORMAT_ACTIVE 2
+#define CDM_MRW_BGFORMAT_COMPLETE 3
+
+/*
+ * mrw address spaces
+ */
+#define MRW_LBA_DMA 0
+#define MRW_LBA_GAA 1
+
+/*
+ * mrw mode pages (first is deprecated) -- probed at init time and
+ * cdi->mrw_mode_page is set
+ */
+#define MRW_MODE_PC_PRE1 0x2c
+#define MRW_MODE_PC 0x03
+
+struct mrw_feature_desc {
+ __be16 feature_code;
+#if defined(__BIG_ENDIAN_BITFIELD)
+ __u8 reserved1 : 2;
+ __u8 feature_version : 4;
+ __u8 persistent : 1;
+ __u8 curr : 1;
+#elif defined(__LITTLE_ENDIAN_BITFIELD)
+ __u8 curr : 1;
+ __u8 persistent : 1;
+ __u8 feature_version : 4;
+ __u8 reserved1 : 2;
+#endif
+ __u8 add_len;
+#if defined(__BIG_ENDIAN_BITFIELD)
+ __u8 reserved2 : 7;
+ __u8 write : 1;
+#elif defined(__LITTLE_ENDIAN_BITFIELD)
+ __u8 write : 1;
+ __u8 reserved2 : 7;
+#endif
+ __u8 reserved3;
+ __u8 reserved4;
+ __u8 reserved5;
+};
+
+/* cf. mmc4r02g.pdf 5.3.10 Random Writable Feature (0020h) pg 197 of 635 */
+struct rwrt_feature_desc {
+ __be16 feature_code;
+#if defined(__BIG_ENDIAN_BITFIELD)
+ __u8 reserved1 : 2;
+ __u8 feature_version : 4;
+ __u8 persistent : 1;
+ __u8 curr : 1;
+#elif defined(__LITTLE_ENDIAN_BITFIELD)
+ __u8 curr : 1;
+ __u8 persistent : 1;
+ __u8 feature_version : 4;
+ __u8 reserved1 : 2;
+#endif
+ __u8 add_len;
+ __u32 last_lba;
+ __u32 block_size;
+ __u16 blocking;
+#if defined(__BIG_ENDIAN_BITFIELD)
+ __u8 reserved2 : 7;
+ __u8 page_present : 1;
+#elif defined(__LITTLE_ENDIAN_BITFIELD)
+ __u8 page_present : 1;
+ __u8 reserved2 : 7;
+#endif
+ __u8 reserved3;
+};
+
+typedef struct {
+ __be16 disc_information_length;
+#if defined(__BIG_ENDIAN_BITFIELD)
+ __u8 reserved1 : 3;
+ __u8 erasable : 1;
+ __u8 border_status : 2;
+ __u8 disc_status : 2;
+#elif defined(__LITTLE_ENDIAN_BITFIELD)
+ __u8 disc_status : 2;
+ __u8 border_status : 2;
+ __u8 erasable : 1;
+ __u8 reserved1 : 3;
+#else
+#error "Please fix <asm/byteorder.h>"
+#endif
+ __u8 n_first_track;
+ __u8 n_sessions_lsb;
+ __u8 first_track_lsb;
+ __u8 last_track_lsb;
+#if defined(__BIG_ENDIAN_BITFIELD)
+ __u8 did_v : 1;
+ __u8 dbc_v : 1;
+ __u8 uru : 1;
+ __u8 reserved2 : 2;
+ __u8 dbit : 1;
+ __u8 mrw_status : 2;
+#elif defined(__LITTLE_ENDIAN_BITFIELD)
+ __u8 mrw_status : 2;
+ __u8 dbit : 1;
+ __u8 reserved2 : 2;
+ __u8 uru : 1;
+ __u8 dbc_v : 1;
+ __u8 did_v : 1;
+#endif
+ __u8 disc_type;
+ __u8 n_sessions_msb;
+ __u8 first_track_msb;
+ __u8 last_track_msb;
+ __u32 disc_id;
+ __u32 lead_in;
+ __u32 lead_out;
+ __u8 disc_bar_code[8];
+ __u8 reserved3;
+ __u8 n_opc;
+} disc_information;
+
+typedef struct {
+ __be16 track_information_length;
+ __u8 track_lsb;
+ __u8 session_lsb;
+ __u8 reserved1;
+#if defined(__BIG_ENDIAN_BITFIELD)
+ __u8 reserved2 : 2;
+ __u8 damage : 1;
+ __u8 copy : 1;
+ __u8 track_mode : 4;
+ __u8 rt : 1;
+ __u8 blank : 1;
+ __u8 packet : 1;
+ __u8 fp : 1;
+ __u8 data_mode : 4;
+ __u8 reserved3 : 6;
+ __u8 lra_v : 1;
+ __u8 nwa_v : 1;
+#elif defined(__LITTLE_ENDIAN_BITFIELD)
+ __u8 track_mode : 4;
+ __u8 copy : 1;
+ __u8 damage : 1;
+ __u8 reserved2 : 2;
+ __u8 data_mode : 4;
+ __u8 fp : 1;
+ __u8 packet : 1;
+ __u8 blank : 1;
+ __u8 rt : 1;
+ __u8 nwa_v : 1;
+ __u8 lra_v : 1;
+ __u8 reserved3 : 6;
+#endif
+ __be32 track_start;
+ __be32 next_writable;
+ __be32 free_blocks;
+ __be32 fixed_packet_size;
+ __be32 track_size;
+ __be32 last_rec_address;
+} track_information;
+
+struct feature_header {
+ __u32 data_len;
+ __u8 reserved1;
+ __u8 reserved2;
+ __u16 curr_profile;
+};
+
+struct mode_page_header {
+ __be16 mode_data_length;
+ __u8 medium_type;
+ __u8 reserved1;
+ __u8 reserved2;
+ __u8 reserved3;
+ __be16 desc_length;
+};
+
+
+#endif /* _UAPI_LINUX_CDROM_H */
diff --git a/include/linux/cgroupstats.h b/include/uapi/linux/cgroupstats.h
similarity index 100%
rename from include/linux/cgroupstats.h
rename to include/uapi/linux/cgroupstats.h
diff --git a/include/linux/chio.h b/include/uapi/linux/chio.h
similarity index 100%
rename from include/linux/chio.h
rename to include/uapi/linux/chio.h
diff --git a/include/uapi/linux/cm4000_cs.h b/include/uapi/linux/cm4000_cs.h
new file mode 100644
index 0000000..bc51f77
--- /dev/null
+++ b/include/uapi/linux/cm4000_cs.h
@@ -0,0 +1,62 @@
+#ifndef _UAPI_CM4000_H_
+#define _UAPI_CM4000_H_
+
+#include <linux/types.h>
+
+#define MAX_ATR 33
+
+#define CM4000_MAX_DEV 4
+
+/* those two structures are passed via ioctl() from/to userspace. They are
+ * used by existing userspace programs, so I kepth the awkward "bIFSD" naming
+ * not to break compilation of userspace apps. -HW */
+
+typedef struct atreq {
+ __s32 atr_len;
+ unsigned char atr[64];
+ __s32 power_act;
+ unsigned char bIFSD;
+ unsigned char bIFSC;
+} atreq_t;
+
+
+/* what is particularly stupid in the original driver is the arch-dependent
+ * member sizes. This leads to CONFIG_COMPAT breakage, since 32bit userspace
+ * will lay out the structure members differently than the 64bit kernel.
+ *
+ * I've changed "ptsreq.protocol" from "unsigned long" to "__u32".
+ * On 32bit this will make no difference. With 64bit kernels, it will make
+ * 32bit apps work, too.
+ */
+
+typedef struct ptsreq {
+ __u32 protocol; /*T=0: 2^0, T=1: 2^1*/
+ unsigned char flags;
+ unsigned char pts1;
+ unsigned char pts2;
+ unsigned char pts3;
+} ptsreq_t;
+
+#define CM_IOC_MAGIC 'c'
+#define CM_IOC_MAXNR 255
+
+#define CM_IOCGSTATUS _IOR (CM_IOC_MAGIC, 0, unsigned char *)
+#define CM_IOCGATR _IOWR(CM_IOC_MAGIC, 1, atreq_t *)
+#define CM_IOCSPTS _IOW (CM_IOC_MAGIC, 2, ptsreq_t *)
+#define CM_IOCSRDR _IO (CM_IOC_MAGIC, 3)
+#define CM_IOCARDOFF _IO (CM_IOC_MAGIC, 4)
+
+#define CM_IOSDBGLVL _IOW(CM_IOC_MAGIC, 250, int*)
+
+/* card and device states */
+#define CM_CARD_INSERTED 0x01
+#define CM_CARD_POWERED 0x02
+#define CM_ATR_PRESENT 0x04
+#define CM_ATR_VALID 0x08
+#define CM_STATE_VALID 0x0f
+/* extra info only from CM4000 */
+#define CM_NO_READER 0x10
+#define CM_BAD_CARD 0x20
+
+
+#endif /* _UAPI_CM4000_H_ */
diff --git a/include/uapi/linux/cn_proc.h b/include/uapi/linux/cn_proc.h
new file mode 100644
index 0000000..0d7b499
--- /dev/null
+++ b/include/uapi/linux/cn_proc.h
@@ -0,0 +1,121 @@
+/*
+ * cn_proc.h - process events connector
+ *
+ * Copyright (C) Matt Helsley, IBM Corp. 2005
+ * Based on cn_fork.h by Nguyen Anh Quynh and Guillaume Thouvenin
+ * Copyright (C) 2005 Nguyen Anh Quynh <aquynh@gmail.com>
+ * Copyright (C) 2005 Guillaume Thouvenin <guillaume.thouvenin@bull.net>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2.1 of the GNU Lesser General Public License
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it would be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef _UAPICN_PROC_H
+#define _UAPICN_PROC_H
+
+#include <linux/types.h>
+
+/*
+ * Userspace sends this enum to register with the kernel that it is listening
+ * for events on the connector.
+ */
+enum proc_cn_mcast_op {
+ PROC_CN_MCAST_LISTEN = 1,
+ PROC_CN_MCAST_IGNORE = 2
+};
+
+/*
+ * From the user's point of view, the process
+ * ID is the thread group ID and thread ID is the internal
+ * kernel "pid". So, fields are assigned as follow:
+ *
+ * In user space - In kernel space
+ *
+ * parent process ID = parent->tgid
+ * parent thread ID = parent->pid
+ * child process ID = child->tgid
+ * child thread ID = child->pid
+ */
+
+struct proc_event {
+ enum what {
+ /* Use successive bits so the enums can be used to record
+ * sets of events as well
+ */
+ PROC_EVENT_NONE = 0x00000000,
+ PROC_EVENT_FORK = 0x00000001,
+ PROC_EVENT_EXEC = 0x00000002,
+ PROC_EVENT_UID = 0x00000004,
+ PROC_EVENT_GID = 0x00000040,
+ PROC_EVENT_SID = 0x00000080,
+ PROC_EVENT_PTRACE = 0x00000100,
+ PROC_EVENT_COMM = 0x00000200,
+ /* "next" should be 0x00000400 */
+ /* "last" is the last process event: exit */
+ PROC_EVENT_EXIT = 0x80000000
+ } what;
+ __u32 cpu;
+ __u64 __attribute__((aligned(8))) timestamp_ns;
+ /* Number of nano seconds since system boot */
+ union { /* must be last field of proc_event struct */
+ struct {
+ __u32 err;
+ } ack;
+
+ struct fork_proc_event {
+ __kernel_pid_t parent_pid;
+ __kernel_pid_t parent_tgid;
+ __kernel_pid_t child_pid;
+ __kernel_pid_t child_tgid;
+ } fork;
+
+ struct exec_proc_event {
+ __kernel_pid_t process_pid;
+ __kernel_pid_t process_tgid;
+ } exec;
+
+ struct id_proc_event {
+ __kernel_pid_t process_pid;
+ __kernel_pid_t process_tgid;
+ union {
+ __u32 ruid; /* task uid */
+ __u32 rgid; /* task gid */
+ } r;
+ union {
+ __u32 euid;
+ __u32 egid;
+ } e;
+ } id;
+
+ struct sid_proc_event {
+ __kernel_pid_t process_pid;
+ __kernel_pid_t process_tgid;
+ } sid;
+
+ struct ptrace_proc_event {
+ __kernel_pid_t process_pid;
+ __kernel_pid_t process_tgid;
+ __kernel_pid_t tracer_pid;
+ __kernel_pid_t tracer_tgid;
+ } ptrace;
+
+ struct comm_proc_event {
+ __kernel_pid_t process_pid;
+ __kernel_pid_t process_tgid;
+ char comm[16];
+ } comm;
+
+ struct exit_proc_event {
+ __kernel_pid_t process_pid;
+ __kernel_pid_t process_tgid;
+ __u32 exit_code, exit_signal;
+ } exit;
+ } event_data;
+};
+
+#endif /* _UAPICN_PROC_H */
diff --git a/include/uapi/linux/coda.h b/include/uapi/linux/coda.h
new file mode 100644
index 0000000..695fade
--- /dev/null
+++ b/include/uapi/linux/coda.h
@@ -0,0 +1,741 @@
+/*
+ You may distribute this file under either of the two licenses that
+ follow at your discretion.
+*/
+
+/* BLURB lgpl
+
+ Coda File System
+ Release 5
+
+ Copyright (c) 1987-1999 Carnegie Mellon University
+ Additional copyrights listed below
+
+This code is distributed "AS IS" without warranty of any kind under
+the terms of the GNU Library General Public Licence Version 2, as
+shown in the file LICENSE, or under the license shown below. The
+technical and financial contributors to Coda are listed in the file
+CREDITS.
+
+ Additional copyrights
+*/
+
+/*
+
+ Coda: an Experimental Distributed File System
+ Release 4.0
+
+ Copyright (c) 1987-1999 Carnegie Mellon University
+ All Rights Reserved
+
+Permission to use, copy, modify and distribute this software and its
+documentation is hereby granted, provided that both the copyright
+notice and this permission notice appear in all copies of the
+software, derivative works or modified versions, and any portions
+thereof, and that both notices appear in supporting documentation, and
+that credit is given to Carnegie Mellon University in all documents
+and publicity pertaining to direct or indirect use of this code or its
+derivatives.
+
+CODA IS AN EXPERIMENTAL SOFTWARE SYSTEM AND IS KNOWN TO HAVE BUGS,
+SOME OF WHICH MAY HAVE SERIOUS CONSEQUENCES. CARNEGIE MELLON ALLOWS
+FREE USE OF THIS SOFTWARE IN ITS "AS IS" CONDITION. CARNEGIE MELLON
+DISCLAIMS ANY LIABILITY OF ANY KIND FOR ANY DAMAGES WHATSOEVER
+RESULTING DIRECTLY OR INDIRECTLY FROM THE USE OF THIS SOFTWARE OR OF
+ANY DERIVATIVE WORK.
+
+Carnegie Mellon encourages users of this software to return any
+improvements or extensions that they make, and to grant Carnegie
+Mellon the rights to redistribute these changes without encumbrance.
+*/
+
+/*
+ *
+ * Based on cfs.h from Mach, but revamped for increased simplicity.
+ * Linux modifications by
+ * Peter Braam, Aug 1996
+ */
+
+#ifndef _UAPI_CODA_HEADER_
+#define _UAPI_CODA_HEADER_
+
+
+/* Catch new _KERNEL defn for NetBSD and DJGPP/__CYGWIN32__ */
+#if defined(__NetBSD__) || \
+ ((defined(DJGPP) || defined(__CYGWIN32__)) && !defined(KERNEL))
+#include <sys/types.h>
+#endif
+
+#ifndef CODA_MAXSYMLINKS
+#define CODA_MAXSYMLINKS 10
+#endif
+
+#if defined(DJGPP) || defined(__CYGWIN32__)
+#ifdef KERNEL
+typedef unsigned long u_long;
+typedef unsigned int u_int;
+typedef unsigned short u_short;
+typedef u_long ino_t;
+typedef u_long dev_t;
+typedef void * caddr_t;
+#ifdef DOS
+typedef unsigned __int64 u_quad_t;
+#else
+typedef unsigned long long u_quad_t;
+#endif
+
+#define inline
+
+struct timespec {
+ long ts_sec;
+ long ts_nsec;
+};
+#else /* DJGPP but not KERNEL */
+#include <sys/time.h>
+typedef unsigned long long u_quad_t;
+#endif /* !KERNEL */
+#endif /* !DJGPP */
+
+
+#if defined(__linux__)
+#include <linux/time.h>
+#define cdev_t u_quad_t
+#ifndef __KERNEL__
+#if !defined(_UQUAD_T_) && (!defined(__GLIBC__) || __GLIBC__ < 2)
+#define _UQUAD_T_ 1
+typedef unsigned long long u_quad_t;
+#endif
+#endif /* __KERNEL__ */
+#else
+#define cdev_t dev_t
+#endif
+
+#ifdef __CYGWIN32__
+struct timespec {
+ time_t tv_sec; /* seconds */
+ long tv_nsec; /* nanoseconds */
+};
+#endif
+
+#ifndef __BIT_TYPES_DEFINED__
+#define __BIT_TYPES_DEFINED__
+typedef signed char int8_t;
+typedef unsigned char u_int8_t;
+typedef short int16_t;
+typedef unsigned short u_int16_t;
+typedef int int32_t;
+typedef unsigned int u_int32_t;
+#endif
+
+
+/*
+ * Cfs constants
+ */
+#define CODA_MAXNAMLEN 255
+#define CODA_MAXPATHLEN 1024
+#define CODA_MAXSYMLINK 10
+
+/* these are Coda's version of O_RDONLY etc combinations
+ * to deal with VFS open modes
+ */
+#define C_O_READ 0x001
+#define C_O_WRITE 0x002
+#define C_O_TRUNC 0x010
+#define C_O_EXCL 0x100
+#define C_O_CREAT 0x200
+
+/* these are to find mode bits in Venus */
+#define C_M_READ 00400
+#define C_M_WRITE 00200
+
+/* for access Venus will use */
+#define C_A_C_OK 8 /* Test for writing upon create. */
+#define C_A_R_OK 4 /* Test for read permission. */
+#define C_A_W_OK 2 /* Test for write permission. */
+#define C_A_X_OK 1 /* Test for execute permission. */
+#define C_A_F_OK 0 /* Test for existence. */
+
+
+
+#ifndef _VENUS_DIRENT_T_
+#define _VENUS_DIRENT_T_ 1
+struct venus_dirent {
+ u_int32_t d_fileno; /* file number of entry */
+ u_int16_t d_reclen; /* length of this record */
+ u_int8_t d_type; /* file type, see below */
+ u_int8_t d_namlen; /* length of string in d_name */
+ char d_name[CODA_MAXNAMLEN + 1];/* name must be no longer than this */
+};
+#undef DIRSIZ
+#define DIRSIZ(dp) ((sizeof (struct venus_dirent) - (CODA_MAXNAMLEN+1)) + \
+ (((dp)->d_namlen+1 + 3) &~ 3))
+
+/*
+ * File types
+ */
+#define CDT_UNKNOWN 0
+#define CDT_FIFO 1
+#define CDT_CHR 2
+#define CDT_DIR 4
+#define CDT_BLK 6
+#define CDT_REG 8
+#define CDT_LNK 10
+#define CDT_SOCK 12
+#define CDT_WHT 14
+
+/*
+ * Convert between stat structure types and directory types.
+ */
+#define IFTOCDT(mode) (((mode) & 0170000) >> 12)
+#define CDTTOIF(dirtype) ((dirtype) << 12)
+
+#endif
+
+#ifndef _VUID_T_
+#define _VUID_T_
+typedef u_int32_t vuid_t;
+typedef u_int32_t vgid_t;
+#endif /*_VUID_T_ */
+
+struct CodaFid {
+ u_int32_t opaque[4];
+};
+
+#define coda_f2i(fid)\
+ (fid ? (fid->opaque[3] ^ (fid->opaque[2]<<10) ^ (fid->opaque[1]<<20) ^ fid->opaque[0]) : 0)
+
+#ifndef _VENUS_VATTR_T_
+#define _VENUS_VATTR_T_
+/*
+ * Vnode types. VNON means no type.
+ */
+enum coda_vtype { C_VNON, C_VREG, C_VDIR, C_VBLK, C_VCHR, C_VLNK, C_VSOCK, C_VFIFO, C_VBAD };
+
+struct coda_vattr {
+ long va_type; /* vnode type (for create) */
+ u_short va_mode; /* files access mode and type */
+ short va_nlink; /* number of references to file */
+ vuid_t va_uid; /* owner user id */
+ vgid_t va_gid; /* owner group id */
+ long va_fileid; /* file id */
+ u_quad_t va_size; /* file size in bytes */
+ long va_blocksize; /* blocksize preferred for i/o */
+ struct timespec va_atime; /* time of last access */
+ struct timespec va_mtime; /* time of last modification */
+ struct timespec va_ctime; /* time file changed */
+ u_long va_gen; /* generation number of file */
+ u_long va_flags; /* flags defined for file */
+ cdev_t va_rdev; /* device special file represents */
+ u_quad_t va_bytes; /* bytes of disk space held by file */
+ u_quad_t va_filerev; /* file modification number */
+};
+
+#endif
+
+/* structure used by CODA_STATFS for getting cache information from venus */
+struct coda_statfs {
+ int32_t f_blocks;
+ int32_t f_bfree;
+ int32_t f_bavail;
+ int32_t f_files;
+ int32_t f_ffree;
+};
+
+/*
+ * Kernel <--> Venus communications.
+ */
+
+#define CODA_ROOT 2
+#define CODA_OPEN_BY_FD 3
+#define CODA_OPEN 4
+#define CODA_CLOSE 5
+#define CODA_IOCTL 6
+#define CODA_GETATTR 7
+#define CODA_SETATTR 8
+#define CODA_ACCESS 9
+#define CODA_LOOKUP 10
+#define CODA_CREATE 11
+#define CODA_REMOVE 12
+#define CODA_LINK 13
+#define CODA_RENAME 14
+#define CODA_MKDIR 15
+#define CODA_RMDIR 16
+#define CODA_SYMLINK 18
+#define CODA_READLINK 19
+#define CODA_FSYNC 20
+#define CODA_VGET 22
+#define CODA_SIGNAL 23
+#define CODA_REPLACE 24 /* DOWNCALL */
+#define CODA_FLUSH 25 /* DOWNCALL */
+#define CODA_PURGEUSER 26 /* DOWNCALL */
+#define CODA_ZAPFILE 27 /* DOWNCALL */
+#define CODA_ZAPDIR 28 /* DOWNCALL */
+#define CODA_PURGEFID 30 /* DOWNCALL */
+#define CODA_OPEN_BY_PATH 31
+#define CODA_RESOLVE 32
+#define CODA_REINTEGRATE 33
+#define CODA_STATFS 34
+#define CODA_STORE 35
+#define CODA_RELEASE 36
+#define CODA_NCALLS 37
+
+#define DOWNCALL(opcode) (opcode >= CODA_REPLACE && opcode <= CODA_PURGEFID)
+
+#define VC_MAXDATASIZE 8192
+#define VC_MAXMSGSIZE sizeof(union inputArgs)+sizeof(union outputArgs) +\
+ VC_MAXDATASIZE
+
+#define CIOC_KERNEL_VERSION _IOWR('c', 10, size_t)
+
+#define CODA_KERNEL_VERSION 3 /* 128-bit file identifiers */
+
+/*
+ * Venus <-> Coda RPC arguments
+ */
+struct coda_in_hdr {
+ u_int32_t opcode;
+ u_int32_t unique; /* Keep multiple outstanding msgs distinct */
+ pid_t pid;
+ pid_t pgid;
+ vuid_t uid;
+};
+
+/* Really important that opcode and unique are 1st two fields! */
+struct coda_out_hdr {
+ u_int32_t opcode;
+ u_int32_t unique;
+ u_int32_t result;
+};
+
+/* coda_root: NO_IN */
+struct coda_root_out {
+ struct coda_out_hdr oh;
+ struct CodaFid VFid;
+};
+
+struct coda_root_in {
+ struct coda_in_hdr in;
+};
+
+/* coda_open: */
+struct coda_open_in {
+ struct coda_in_hdr ih;
+ struct CodaFid VFid;
+ int flags;
+};
+
+struct coda_open_out {
+ struct coda_out_hdr oh;
+ cdev_t dev;
+ ino_t inode;
+};
+
+
+/* coda_store: */
+struct coda_store_in {
+ struct coda_in_hdr ih;
+ struct CodaFid VFid;
+ int flags;
+};
+
+struct coda_store_out {
+ struct coda_out_hdr out;
+};
+
+/* coda_release: */
+struct coda_release_in {
+ struct coda_in_hdr ih;
+ struct CodaFid VFid;
+ int flags;
+};
+
+struct coda_release_out {
+ struct coda_out_hdr out;
+};
+
+/* coda_close: */
+struct coda_close_in {
+ struct coda_in_hdr ih;
+ struct CodaFid VFid;
+ int flags;
+};
+
+struct coda_close_out {
+ struct coda_out_hdr out;
+};
+
+/* coda_ioctl: */
+struct coda_ioctl_in {
+ struct coda_in_hdr ih;
+ struct CodaFid VFid;
+ int cmd;
+ int len;
+ int rwflag;
+ char *data; /* Place holder for data. */
+};
+
+struct coda_ioctl_out {
+ struct coda_out_hdr oh;
+ int len;
+ caddr_t data; /* Place holder for data. */
+};
+
+
+/* coda_getattr: */
+struct coda_getattr_in {
+ struct coda_in_hdr ih;
+ struct CodaFid VFid;
+};
+
+struct coda_getattr_out {
+ struct coda_out_hdr oh;
+ struct coda_vattr attr;
+};
+
+
+/* coda_setattr: NO_OUT */
+struct coda_setattr_in {
+ struct coda_in_hdr ih;
+ struct CodaFid VFid;
+ struct coda_vattr attr;
+};
+
+struct coda_setattr_out {
+ struct coda_out_hdr out;
+};
+
+/* coda_access: NO_OUT */
+struct coda_access_in {
+ struct coda_in_hdr ih;
+ struct CodaFid VFid;
+ int flags;
+};
+
+struct coda_access_out {
+ struct coda_out_hdr out;
+};
+
+
+/* lookup flags */
+#define CLU_CASE_SENSITIVE 0x01
+#define CLU_CASE_INSENSITIVE 0x02
+
+/* coda_lookup: */
+struct coda_lookup_in {
+ struct coda_in_hdr ih;
+ struct CodaFid VFid;
+ int name; /* Place holder for data. */
+ int flags;
+};
+
+struct coda_lookup_out {
+ struct coda_out_hdr oh;
+ struct CodaFid VFid;
+ int vtype;
+};
+
+
+/* coda_create: */
+struct coda_create_in {
+ struct coda_in_hdr ih;
+ struct CodaFid VFid;
+ struct coda_vattr attr;
+ int excl;
+ int mode;
+ int name; /* Place holder for data. */
+};
+
+struct coda_create_out {
+ struct coda_out_hdr oh;
+ struct CodaFid VFid;
+ struct coda_vattr attr;
+};
+
+
+/* coda_remove: NO_OUT */
+struct coda_remove_in {
+ struct coda_in_hdr ih;
+ struct CodaFid VFid;
+ int name; /* Place holder for data. */
+};
+
+struct coda_remove_out {
+ struct coda_out_hdr out;
+};
+
+/* coda_link: NO_OUT */
+struct coda_link_in {
+ struct coda_in_hdr ih;
+ struct CodaFid sourceFid; /* cnode to link *to* */
+ struct CodaFid destFid; /* Directory in which to place link */
+ int tname; /* Place holder for data. */
+};
+
+struct coda_link_out {
+ struct coda_out_hdr out;
+};
+
+
+/* coda_rename: NO_OUT */
+struct coda_rename_in {
+ struct coda_in_hdr ih;
+ struct CodaFid sourceFid;
+ int srcname;
+ struct CodaFid destFid;
+ int destname;
+};
+
+struct coda_rename_out {
+ struct coda_out_hdr out;
+};
+
+/* coda_mkdir: */
+struct coda_mkdir_in {
+ struct coda_in_hdr ih;
+ struct CodaFid VFid;
+ struct coda_vattr attr;
+ int name; /* Place holder for data. */
+};
+
+struct coda_mkdir_out {
+ struct coda_out_hdr oh;
+ struct CodaFid VFid;
+ struct coda_vattr attr;
+};
+
+
+/* coda_rmdir: NO_OUT */
+struct coda_rmdir_in {
+ struct coda_in_hdr ih;
+ struct CodaFid VFid;
+ int name; /* Place holder for data. */
+};
+
+struct coda_rmdir_out {
+ struct coda_out_hdr out;
+};
+
+/* coda_symlink: NO_OUT */
+struct coda_symlink_in {
+ struct coda_in_hdr ih;
+ struct CodaFid VFid; /* Directory to put symlink in */
+ int srcname;
+ struct coda_vattr attr;
+ int tname;
+};
+
+struct coda_symlink_out {
+ struct coda_out_hdr out;
+};
+
+/* coda_readlink: */
+struct coda_readlink_in {
+ struct coda_in_hdr ih;
+ struct CodaFid VFid;
+};
+
+struct coda_readlink_out {
+ struct coda_out_hdr oh;
+ int count;
+ caddr_t data; /* Place holder for data. */
+};
+
+
+/* coda_fsync: NO_OUT */
+struct coda_fsync_in {
+ struct coda_in_hdr ih;
+ struct CodaFid VFid;
+};
+
+struct coda_fsync_out {
+ struct coda_out_hdr out;
+};
+
+/* coda_vget: */
+struct coda_vget_in {
+ struct coda_in_hdr ih;
+ struct CodaFid VFid;
+};
+
+struct coda_vget_out {
+ struct coda_out_hdr oh;
+ struct CodaFid VFid;
+ int vtype;
+};
+
+
+/* CODA_SIGNAL is out-of-band, doesn't need data. */
+/* CODA_INVALIDATE is a venus->kernel call */
+/* CODA_FLUSH is a venus->kernel call */
+
+/* coda_purgeuser: */
+/* CODA_PURGEUSER is a venus->kernel call */
+struct coda_purgeuser_out {
+ struct coda_out_hdr oh;
+ vuid_t uid;
+};
+
+/* coda_zapfile: */
+/* CODA_ZAPFILE is a venus->kernel call */
+struct coda_zapfile_out {
+ struct coda_out_hdr oh;
+ struct CodaFid CodaFid;
+};
+
+/* coda_zapdir: */
+/* CODA_ZAPDIR is a venus->kernel call */
+struct coda_zapdir_out {
+ struct coda_out_hdr oh;
+ struct CodaFid CodaFid;
+};
+
+/* coda_purgefid: */
+/* CODA_PURGEFID is a venus->kernel call */
+struct coda_purgefid_out {
+ struct coda_out_hdr oh;
+ struct CodaFid CodaFid;
+};
+
+/* coda_replace: */
+/* CODA_REPLACE is a venus->kernel call */
+struct coda_replace_out { /* coda_replace is a venus->kernel call */
+ struct coda_out_hdr oh;
+ struct CodaFid NewFid;
+ struct CodaFid OldFid;
+};
+
+/* coda_open_by_fd: */
+struct coda_open_by_fd_in {
+ struct coda_in_hdr ih;
+ struct CodaFid VFid;
+ int flags;
+};
+
+struct coda_open_by_fd_out {
+ struct coda_out_hdr oh;
+ int fd;
+
+#ifdef __KERNEL__
+ struct file *fh; /* not passed from userspace but used in-kernel only */
+#endif
+};
+
+/* coda_open_by_path: */
+struct coda_open_by_path_in {
+ struct coda_in_hdr ih;
+ struct CodaFid VFid;
+ int flags;
+};
+
+struct coda_open_by_path_out {
+ struct coda_out_hdr oh;
+ int path;
+};
+
+/* coda_statfs: NO_IN */
+struct coda_statfs_in {
+ struct coda_in_hdr in;
+};
+
+struct coda_statfs_out {
+ struct coda_out_hdr oh;
+ struct coda_statfs stat;
+};
+
+/*
+ * Occasionally, we don't cache the fid returned by CODA_LOOKUP.
+ * For instance, if the fid is inconsistent.
+ * This case is handled by setting the top bit of the type result parameter.
+ */
+#define CODA_NOCACHE 0x80000000
+
+union inputArgs {
+ struct coda_in_hdr ih; /* NB: every struct below begins with an ih */
+ struct coda_open_in coda_open;
+ struct coda_store_in coda_store;
+ struct coda_release_in coda_release;
+ struct coda_close_in coda_close;
+ struct coda_ioctl_in coda_ioctl;
+ struct coda_getattr_in coda_getattr;
+ struct coda_setattr_in coda_setattr;
+ struct coda_access_in coda_access;
+ struct coda_lookup_in coda_lookup;
+ struct coda_create_in coda_create;
+ struct coda_remove_in coda_remove;
+ struct coda_link_in coda_link;
+ struct coda_rename_in coda_rename;
+ struct coda_mkdir_in coda_mkdir;
+ struct coda_rmdir_in coda_rmdir;
+ struct coda_symlink_in coda_symlink;
+ struct coda_readlink_in coda_readlink;
+ struct coda_fsync_in coda_fsync;
+ struct coda_vget_in coda_vget;
+ struct coda_open_by_fd_in coda_open_by_fd;
+ struct coda_open_by_path_in coda_open_by_path;
+ struct coda_statfs_in coda_statfs;
+};
+
+union outputArgs {
+ struct coda_out_hdr oh; /* NB: every struct below begins with an oh */
+ struct coda_root_out coda_root;
+ struct coda_open_out coda_open;
+ struct coda_ioctl_out coda_ioctl;
+ struct coda_getattr_out coda_getattr;
+ struct coda_lookup_out coda_lookup;
+ struct coda_create_out coda_create;
+ struct coda_mkdir_out coda_mkdir;
+ struct coda_readlink_out coda_readlink;
+ struct coda_vget_out coda_vget;
+ struct coda_purgeuser_out coda_purgeuser;
+ struct coda_zapfile_out coda_zapfile;
+ struct coda_zapdir_out coda_zapdir;
+ struct coda_purgefid_out coda_purgefid;
+ struct coda_replace_out coda_replace;
+ struct coda_open_by_fd_out coda_open_by_fd;
+ struct coda_open_by_path_out coda_open_by_path;
+ struct coda_statfs_out coda_statfs;
+};
+
+union coda_downcalls {
+ /* CODA_INVALIDATE is a venus->kernel call */
+ /* CODA_FLUSH is a venus->kernel call */
+ struct coda_purgeuser_out purgeuser;
+ struct coda_zapfile_out zapfile;
+ struct coda_zapdir_out zapdir;
+ struct coda_purgefid_out purgefid;
+ struct coda_replace_out replace;
+};
+
+
+/*
+ * Used for identifying usage of "Control" and pioctls
+ */
+
+#define PIOCPARM_MASK 0x0000ffff
+struct ViceIoctl {
+ void __user *in; /* Data to be transferred in */
+ void __user *out; /* Data to be transferred out */
+ u_short in_size; /* Size of input buffer <= 2K */
+ u_short out_size; /* Maximum size of output buffer, <= 2K */
+};
+
+struct PioctlData {
+ const char __user *path;
+ int follow;
+ struct ViceIoctl vi;
+};
+
+#define CODA_CONTROL ".CONTROL"
+#define CODA_CONTROLLEN 8
+#define CTL_INO -1
+
+/* Data passed to mount */
+
+#define CODA_MOUNT_VERSION 1
+
+struct coda_mount_data {
+ int version;
+ int fd; /* Opened device */
+};
+
+#endif /* _UAPI_CODA_HEADER_ */
diff --git a/include/uapi/linux/coda_psdev.h b/include/uapi/linux/coda_psdev.h
new file mode 100644
index 0000000..79d0598
--- /dev/null
+++ b/include/uapi/linux/coda_psdev.h
@@ -0,0 +1,27 @@
+#ifndef _UAPI__CODA_PSDEV_H
+#define _UAPI__CODA_PSDEV_H
+
+#include <linux/magic.h>
+
+#define CODA_PSDEV_MAJOR 67
+#define MAX_CODADEVS 5 /* how many do we allow */
+
+
+/* messages between coda filesystem in kernel and Venus */
+struct upc_req {
+ struct list_head uc_chain;
+ caddr_t uc_data;
+ u_short uc_flags;
+ u_short uc_inSize; /* Size is at most 5000 bytes */
+ u_short uc_outSize;
+ u_short uc_opcode; /* copied from data to save lookup */
+ int uc_unique;
+ wait_queue_head_t uc_sleep; /* process' wait queue */
+};
+
+#define CODA_REQ_ASYNC 0x1
+#define CODA_REQ_READ 0x2
+#define CODA_REQ_WRITE 0x4
+#define CODA_REQ_ABORT 0x8
+
+#endif /* _UAPI__CODA_PSDEV_H */
diff --git a/include/linux/coff.h b/include/uapi/linux/coff.h
similarity index 100%
rename from include/linux/coff.h
rename to include/uapi/linux/coff.h
diff --git a/include/uapi/linux/connector.h b/include/uapi/linux/connector.h
new file mode 100644
index 0000000..8761a03
--- /dev/null
+++ b/include/uapi/linux/connector.h
@@ -0,0 +1,77 @@
+/*
+ * connector.h
+ *
+ * 2004-2005 Copyright (c) Evgeniy Polyakov <zbr@ioremap.net>
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef _UAPI__CONNECTOR_H
+#define _UAPI__CONNECTOR_H
+
+#include <linux/types.h>
+
+/*
+ * Process Events connector unique ids -- used for message routing
+ */
+#define CN_IDX_PROC 0x1
+#define CN_VAL_PROC 0x1
+#define CN_IDX_CIFS 0x2
+#define CN_VAL_CIFS 0x1
+#define CN_W1_IDX 0x3 /* w1 communication */
+#define CN_W1_VAL 0x1
+#define CN_IDX_V86D 0x4
+#define CN_VAL_V86D_UVESAFB 0x1
+#define CN_IDX_BB 0x5 /* BlackBoard, from the TSP GPL sampling framework */
+#define CN_DST_IDX 0x6
+#define CN_DST_VAL 0x1
+#define CN_IDX_DM 0x7 /* Device Mapper */
+#define CN_VAL_DM_USERSPACE_LOG 0x1
+#define CN_IDX_DRBD 0x8
+#define CN_VAL_DRBD 0x1
+#define CN_KVP_IDX 0x9 /* HyperV KVP */
+#define CN_KVP_VAL 0x1 /* queries from the kernel */
+
+#define CN_NETLINK_USERS 10 /* Highest index + 1 */
+
+/*
+ * Maximum connector's message size.
+ */
+#define CONNECTOR_MAX_MSG_SIZE 16384
+
+/*
+ * idx and val are unique identifiers which
+ * are used for message routing and
+ * must be registered in connector.h for in-kernel usage.
+ */
+
+struct cb_id {
+ __u32 idx;
+ __u32 val;
+};
+
+struct cn_msg {
+ struct cb_id id;
+
+ __u32 seq;
+ __u32 ack;
+
+ __u16 len; /* Length of the following data */
+ __u16 flags;
+ __u8 data[0];
+};
+
+#endif /* _UAPI__CONNECTOR_H */
diff --git a/include/linux/const.h b/include/uapi/linux/const.h
similarity index 100%
rename from include/linux/const.h
rename to include/uapi/linux/const.h
diff --git a/include/uapi/linux/cramfs_fs.h b/include/uapi/linux/cramfs_fs.h
new file mode 100644
index 0000000..e4611a9
--- /dev/null
+++ b/include/uapi/linux/cramfs_fs.h
@@ -0,0 +1,88 @@
+#ifndef _UAPI__CRAMFS_H
+#define _UAPI__CRAMFS_H
+
+#include <linux/types.h>
+#include <linux/magic.h>
+
+#define CRAMFS_SIGNATURE "Compressed ROMFS"
+
+/*
+ * Width of various bitfields in struct cramfs_inode.
+ * Primarily used to generate warnings in mkcramfs.
+ */
+#define CRAMFS_MODE_WIDTH 16
+#define CRAMFS_UID_WIDTH 16
+#define CRAMFS_SIZE_WIDTH 24
+#define CRAMFS_GID_WIDTH 8
+#define CRAMFS_NAMELEN_WIDTH 6
+#define CRAMFS_OFFSET_WIDTH 26
+
+/*
+ * Since inode.namelen is a unsigned 6-bit number, the maximum cramfs
+ * path length is 63 << 2 = 252.
+ */
+#define CRAMFS_MAXPATHLEN (((1 << CRAMFS_NAMELEN_WIDTH) - 1) << 2)
+
+/*
+ * Reasonably terse representation of the inode data.
+ */
+struct cramfs_inode {
+ __u32 mode:CRAMFS_MODE_WIDTH, uid:CRAMFS_UID_WIDTH;
+ /* SIZE for device files is i_rdev */
+ __u32 size:CRAMFS_SIZE_WIDTH, gid:CRAMFS_GID_WIDTH;
+ /* NAMELEN is the length of the file name, divided by 4 and
+ rounded up. (cramfs doesn't support hard links.) */
+ /* OFFSET: For symlinks and non-empty regular files, this
+ contains the offset (divided by 4) of the file data in
+ compressed form (starting with an array of block pointers;
+ see README). For non-empty directories it is the offset
+ (divided by 4) of the inode of the first file in that
+ directory. For anything else, offset is zero. */
+ __u32 namelen:CRAMFS_NAMELEN_WIDTH, offset:CRAMFS_OFFSET_WIDTH;
+};
+
+struct cramfs_info {
+ __u32 crc;
+ __u32 edition;
+ __u32 blocks;
+ __u32 files;
+};
+
+/*
+ * Superblock information at the beginning of the FS.
+ */
+struct cramfs_super {
+ __u32 magic; /* 0x28cd3d45 - random number */
+ __u32 size; /* length in bytes */
+ __u32 flags; /* feature flags */
+ __u32 future; /* reserved for future use */
+ __u8 signature[16]; /* "Compressed ROMFS" */
+ struct cramfs_info fsid; /* unique filesystem info */
+ __u8 name[16]; /* user-defined name */
+ struct cramfs_inode root; /* root inode data */
+};
+
+/*
+ * Feature flags
+ *
+ * 0x00000000 - 0x000000ff: features that work for all past kernels
+ * 0x00000100 - 0xffffffff: features that don't work for past kernels
+ */
+#define CRAMFS_FLAG_FSID_VERSION_2 0x00000001 /* fsid version #2 */
+#define CRAMFS_FLAG_SORTED_DIRS 0x00000002 /* sorted dirs */
+#define CRAMFS_FLAG_HOLES 0x00000100 /* support for holes */
+#define CRAMFS_FLAG_WRONG_SIGNATURE 0x00000200 /* reserved */
+#define CRAMFS_FLAG_SHIFTED_ROOT_OFFSET 0x00000400 /* shifted root fs */
+
+/*
+ * Valid values in super.flags. Currently we refuse to mount
+ * if (flags & ~CRAMFS_SUPPORTED_FLAGS). Maybe that should be
+ * changed to test super.future instead.
+ */
+#define CRAMFS_SUPPORTED_FLAGS ( 0x000000ff \
+ | CRAMFS_FLAG_HOLES \
+ | CRAMFS_FLAG_WRONG_SIGNATURE \
+ | CRAMFS_FLAG_SHIFTED_ROOT_OFFSET )
+
+
+#endif /* _UAPI__CRAMFS_H */
diff --git a/include/uapi/linux/cuda.h b/include/uapi/linux/cuda.h
new file mode 100644
index 0000000..286f9f1
--- /dev/null
+++ b/include/uapi/linux/cuda.h
@@ -0,0 +1,33 @@
+/*
+ * Definitions for talking to the CUDA. The CUDA is a microcontroller
+ * which controls the ADB, system power, RTC, and various other things.
+ *
+ * Copyright (C) 1996 Paul Mackerras.
+ */
+
+#ifndef _UAPI_LINUX_CUDA_H
+#define _UAPI_LINUX_CUDA_H
+
+/* CUDA commands (2nd byte) */
+#define CUDA_WARM_START 0
+#define CUDA_AUTOPOLL 1
+#define CUDA_GET_6805_ADDR 2
+#define CUDA_GET_TIME 3
+#define CUDA_GET_PRAM 7
+#define CUDA_SET_6805_ADDR 8
+#define CUDA_SET_TIME 9
+#define CUDA_POWERDOWN 0xa
+#define CUDA_POWERUP_TIME 0xb
+#define CUDA_SET_PRAM 0xc
+#define CUDA_MS_RESET 0xd
+#define CUDA_SEND_DFAC 0xe
+#define CUDA_RESET_SYSTEM 0x11
+#define CUDA_SET_IPL 0x12
+#define CUDA_SET_AUTO_RATE 0x14
+#define CUDA_GET_AUTO_RATE 0x16
+#define CUDA_SET_DEVICE_LIST 0x19
+#define CUDA_GET_DEVICE_LIST 0x1a
+#define CUDA_GET_SET_IIC 0x22
+
+
+#endif /* _UAPI_LINUX_CUDA_H */
diff --git a/include/uapi/linux/cyclades.h b/include/uapi/linux/cyclades.h
new file mode 100644
index 0000000..12b587a
--- /dev/null
+++ b/include/uapi/linux/cyclades.h
@@ -0,0 +1,493 @@
+/* $Revision: 3.0 $$Date: 1998/11/02 14:20:59 $
+ * linux/include/linux/cyclades.h
+ *
+ * This file was initially written by
+ * Randolph Bentson <bentson@grieg.seaslug.org> and is maintained by
+ * Ivan Passos <ivan@cyclades.com>.
+ *
+ * This file contains the general definitions for the cyclades.c driver
+ *$Log: cyclades.h,v $
+ *Revision 3.1 2002/01/29 11:36:16 henrique
+ *added throttle field on struct cyclades_port to indicate whether the
+ *port is throttled or not
+ *
+ *Revision 3.1 2000/04/19 18:52:52 ivan
+ *converted address fields to unsigned long and added fields for physical
+ *addresses on cyclades_card structure;
+ *
+ *Revision 3.0 1998/11/02 14:20:59 ivan
+ *added nports field on cyclades_card structure;
+ *
+ *Revision 2.5 1998/08/03 16:57:01 ivan
+ *added cyclades_idle_stats structure;
+ *
+ *Revision 2.4 1998/06/01 12:09:53 ivan
+ *removed closing_wait2 from cyclades_port structure;
+ *
+ *Revision 2.3 1998/03/16 18:01:12 ivan
+ *changes in the cyclades_port structure to get it closer to the
+ *standard serial port structure;
+ *added constants for new ioctls;
+ *
+ *Revision 2.2 1998/02/17 16:50:00 ivan
+ *changes in the cyclades_port structure (addition of shutdown_wait and
+ *chip_rev variables);
+ *added constants for new ioctls and for CD1400 rev. numbers.
+ *
+ *Revision 2.1 1997/10/24 16:03:00 ivan
+ *added rflow (which allows enabling the CD1400 special flow control
+ *feature) and rtsdtr_inv (which allows DTR/RTS pin inversion) to
+ *cyclades_port structure;
+ *added Alpha support
+ *
+ *Revision 2.0 1997/06/30 10:30:00 ivan
+ *added some new doorbell command constants related to IOCTLW and
+ *UART error signaling
+ *
+ *Revision 1.8 1997/06/03 15:30:00 ivan
+ *added constant ZFIRM_HLT
+ *added constant CyPCI_Ze_win ( = 2 * Cy_PCI_Zwin)
+ *
+ *Revision 1.7 1997/03/26 10:30:00 daniel
+ *new entries at the end of cyclades_port struct to reallocate
+ *variables illegally allocated within card memory.
+ *
+ *Revision 1.6 1996/09/09 18:35:30 bentson
+ *fold in changes for Cyclom-Z -- including structures for
+ *communicating with board as well modest changes to original
+ *structures to support new features.
+ *
+ *Revision 1.5 1995/11/13 21:13:31 bentson
+ *changes suggested by Michael Chastain <mec@duracef.shout.net>
+ *to support use of this file in non-kernel applications
+ *
+ *
+ */
+
+#ifndef _UAPI_LINUX_CYCLADES_H
+#define _UAPI_LINUX_CYCLADES_H
+
+#include <linux/types.h>
+
+struct cyclades_monitor {
+ unsigned long int_count;
+ unsigned long char_count;
+ unsigned long char_max;
+ unsigned long char_last;
+};
+
+/*
+ * These stats all reflect activity since the device was last initialized.
+ * (i.e., since the port was opened with no other processes already having it
+ * open)
+ */
+struct cyclades_idle_stats {
+ __kernel_time_t in_use; /* Time device has been in use (secs) */
+ __kernel_time_t recv_idle; /* Time since last char received (secs) */
+ __kernel_time_t xmit_idle; /* Time since last char transmitted (secs) */
+ unsigned long recv_bytes; /* Bytes received */
+ unsigned long xmit_bytes; /* Bytes transmitted */
+ unsigned long overruns; /* Input overruns */
+ unsigned long frame_errs; /* Input framing errors */
+ unsigned long parity_errs; /* Input parity errors */
+};
+
+#define CYCLADES_MAGIC 0x4359
+
+#define CYGETMON 0x435901
+#define CYGETTHRESH 0x435902
+#define CYSETTHRESH 0x435903
+#define CYGETDEFTHRESH 0x435904
+#define CYSETDEFTHRESH 0x435905
+#define CYGETTIMEOUT 0x435906
+#define CYSETTIMEOUT 0x435907
+#define CYGETDEFTIMEOUT 0x435908
+#define CYSETDEFTIMEOUT 0x435909
+#define CYSETRFLOW 0x43590a
+#define CYGETRFLOW 0x43590b
+#define CYSETRTSDTR_INV 0x43590c
+#define CYGETRTSDTR_INV 0x43590d
+#define CYZSETPOLLCYCLE 0x43590e
+#define CYZGETPOLLCYCLE 0x43590f
+#define CYGETCD1400VER 0x435910
+#define CYSETWAIT 0x435912
+#define CYGETWAIT 0x435913
+
+/*************** CYCLOM-Z ADDITIONS ***************/
+
+#define CZIOC ('M' << 8)
+#define CZ_NBOARDS (CZIOC|0xfa)
+#define CZ_BOOT_START (CZIOC|0xfb)
+#define CZ_BOOT_DATA (CZIOC|0xfc)
+#define CZ_BOOT_END (CZIOC|0xfd)
+#define CZ_TEST (CZIOC|0xfe)
+
+#define CZ_DEF_POLL (HZ/25)
+
+#define MAX_BOARD 4 /* Max number of boards */
+#define MAX_DEV 256 /* Max number of ports total */
+#define CYZ_MAX_SPEED 921600
+
+#define CYZ_FIFO_SIZE 16
+
+#define CYZ_BOOT_NWORDS 0x100
+struct CYZ_BOOT_CTRL {
+ unsigned short nboard;
+ int status[MAX_BOARD];
+ int nchannel[MAX_BOARD];
+ int fw_rev[MAX_BOARD];
+ unsigned long offset;
+ unsigned long data[CYZ_BOOT_NWORDS];
+};
+
+
+#ifndef DP_WINDOW_SIZE
+/*
+ * Memory Window Sizes
+ */
+
+#define DP_WINDOW_SIZE (0x00080000) /* window size 512 Kb */
+#define ZE_DP_WINDOW_SIZE (0x00100000) /* window size 1 Mb (Ze and
+ 8Zo V.2 */
+#define CTRL_WINDOW_SIZE (0x00000080) /* runtime regs 128 bytes */
+
+/*
+ * CUSTOM_REG - Cyclom-Z/PCI Custom Registers Set. The driver
+ * normally will access only interested on the fpga_id, fpga_version,
+ * start_cpu and stop_cpu.
+ */
+
+struct CUSTOM_REG {
+ __u32 fpga_id; /* FPGA Identification Register */
+ __u32 fpga_version; /* FPGA Version Number Register */
+ __u32 cpu_start; /* CPU start Register (write) */
+ __u32 cpu_stop; /* CPU stop Register (write) */
+ __u32 misc_reg; /* Miscellaneous Register */
+ __u32 idt_mode; /* IDT mode Register */
+ __u32 uart_irq_status; /* UART IRQ status Register */
+ __u32 clear_timer0_irq; /* Clear timer interrupt Register */
+ __u32 clear_timer1_irq; /* Clear timer interrupt Register */
+ __u32 clear_timer2_irq; /* Clear timer interrupt Register */
+ __u32 test_register; /* Test Register */
+ __u32 test_count; /* Test Count Register */
+ __u32 timer_select; /* Timer select register */
+ __u32 pr_uart_irq_status; /* Prioritized UART IRQ stat Reg */
+ __u32 ram_wait_state; /* RAM wait-state Register */
+ __u32 uart_wait_state; /* UART wait-state Register */
+ __u32 timer_wait_state; /* timer wait-state Register */
+ __u32 ack_wait_state; /* ACK wait State Register */
+};
+
+/*
+ * RUNTIME_9060 - PLX PCI9060ES local configuration and shared runtime
+ * registers. This structure can be used to access the 9060 registers
+ * (memory mapped).
+ */
+
+struct RUNTIME_9060 {
+ __u32 loc_addr_range; /* 00h - Local Address Range */
+ __u32 loc_addr_base; /* 04h - Local Address Base */
+ __u32 loc_arbitr; /* 08h - Local Arbitration */
+ __u32 endian_descr; /* 0Ch - Big/Little Endian Descriptor */
+ __u32 loc_rom_range; /* 10h - Local ROM Range */
+ __u32 loc_rom_base; /* 14h - Local ROM Base */
+ __u32 loc_bus_descr; /* 18h - Local Bus descriptor */
+ __u32 loc_range_mst; /* 1Ch - Local Range for Master to PCI */
+ __u32 loc_base_mst; /* 20h - Local Base for Master PCI */
+ __u32 loc_range_io; /* 24h - Local Range for Master IO */
+ __u32 pci_base_mst; /* 28h - PCI Base for Master PCI */
+ __u32 pci_conf_io; /* 2Ch - PCI configuration for Master IO */
+ __u32 filler1; /* 30h */
+ __u32 filler2; /* 34h */
+ __u32 filler3; /* 38h */
+ __u32 filler4; /* 3Ch */
+ __u32 mail_box_0; /* 40h - Mail Box 0 */
+ __u32 mail_box_1; /* 44h - Mail Box 1 */
+ __u32 mail_box_2; /* 48h - Mail Box 2 */
+ __u32 mail_box_3; /* 4Ch - Mail Box 3 */
+ __u32 filler5; /* 50h */
+ __u32 filler6; /* 54h */
+ __u32 filler7; /* 58h */
+ __u32 filler8; /* 5Ch */
+ __u32 pci_doorbell; /* 60h - PCI to Local Doorbell */
+ __u32 loc_doorbell; /* 64h - Local to PCI Doorbell */
+ __u32 intr_ctrl_stat; /* 68h - Interrupt Control/Status */
+ __u32 init_ctrl; /* 6Ch - EEPROM control, Init Control, etc */
+};
+
+/* Values for the Local Base Address re-map register */
+
+#define WIN_RAM 0x00000001L /* set the sliding window to RAM */
+#define WIN_CREG 0x14000001L /* set the window to custom Registers */
+
+/* Values timer select registers */
+
+#define TIMER_BY_1M 0x00 /* clock divided by 1M */
+#define TIMER_BY_256K 0x01 /* clock divided by 256k */
+#define TIMER_BY_128K 0x02 /* clock divided by 128k */
+#define TIMER_BY_32K 0x03 /* clock divided by 32k */
+
+/****************** ****************** *******************/
+#endif
+
+#ifndef ZFIRM_ID
+/* #include "zfwint.h" */
+/****************** ****************** *******************/
+/*
+ * This file contains the definitions for interfacing with the
+ * Cyclom-Z ZFIRM Firmware.
+ */
+
+/* General Constant definitions */
+
+#define MAX_CHAN 64 /* max number of channels per board */
+
+/* firmware id structure (set after boot) */
+
+#define ID_ADDRESS 0x00000180L /* signature/pointer address */
+#define ZFIRM_ID 0x5557465AL /* ZFIRM/U signature */
+#define ZFIRM_HLT 0x59505B5CL /* ZFIRM needs external power supply */
+#define ZFIRM_RST 0x56040674L /* RST signal (due to FW reset) */
+
+#define ZF_TINACT_DEF 1000 /* default inactivity timeout
+ (1000 ms) */
+#define ZF_TINACT ZF_TINACT_DEF
+
+struct FIRM_ID {
+ __u32 signature; /* ZFIRM/U signature */
+ __u32 zfwctrl_addr; /* pointer to ZFW_CTRL structure */
+};
+
+/* Op. System id */
+
+#define C_OS_LINUX 0x00000030 /* generic Linux system */
+
+/* channel op_mode */
+
+#define C_CH_DISABLE 0x00000000 /* channel is disabled */
+#define C_CH_TXENABLE 0x00000001 /* channel Tx enabled */
+#define C_CH_RXENABLE 0x00000002 /* channel Rx enabled */
+#define C_CH_ENABLE 0x00000003 /* channel Tx/Rx enabled */
+#define C_CH_LOOPBACK 0x00000004 /* Loopback mode */
+
+/* comm_parity - parity */
+
+#define C_PR_NONE 0x00000000 /* None */
+#define C_PR_ODD 0x00000001 /* Odd */
+#define C_PR_EVEN 0x00000002 /* Even */
+#define C_PR_MARK 0x00000004 /* Mark */
+#define C_PR_SPACE 0x00000008 /* Space */
+#define C_PR_PARITY 0x000000ff
+
+#define C_PR_DISCARD 0x00000100 /* discard char with frame/par error */
+#define C_PR_IGNORE 0x00000200 /* ignore frame/par error */
+
+/* comm_data_l - data length and stop bits */
+
+#define C_DL_CS5 0x00000001
+#define C_DL_CS6 0x00000002
+#define C_DL_CS7 0x00000004
+#define C_DL_CS8 0x00000008
+#define C_DL_CS 0x0000000f
+#define C_DL_1STOP 0x00000010
+#define C_DL_15STOP 0x00000020
+#define C_DL_2STOP 0x00000040
+#define C_DL_STOP 0x000000f0
+
+/* interrupt enabling/status */
+
+#define C_IN_DISABLE 0x00000000 /* zero, disable interrupts */
+#define C_IN_TXBEMPTY 0x00000001 /* tx buffer empty */
+#define C_IN_TXLOWWM 0x00000002 /* tx buffer below LWM */
+#define C_IN_RXHIWM 0x00000010 /* rx buffer above HWM */
+#define C_IN_RXNNDT 0x00000020 /* rx no new data timeout */
+#define C_IN_MDCD 0x00000100 /* modem DCD change */
+#define C_IN_MDSR 0x00000200 /* modem DSR change */
+#define C_IN_MRI 0x00000400 /* modem RI change */
+#define C_IN_MCTS 0x00000800 /* modem CTS change */
+#define C_IN_RXBRK 0x00001000 /* Break received */
+#define C_IN_PR_ERROR 0x00002000 /* parity error */
+#define C_IN_FR_ERROR 0x00004000 /* frame error */
+#define C_IN_OVR_ERROR 0x00008000 /* overrun error */
+#define C_IN_RXOFL 0x00010000 /* RX buffer overflow */
+#define C_IN_IOCTLW 0x00020000 /* I/O control w/ wait */
+#define C_IN_MRTS 0x00040000 /* modem RTS drop */
+#define C_IN_ICHAR 0x00080000
+
+/* flow control */
+
+#define C_FL_OXX 0x00000001 /* output Xon/Xoff flow control */
+#define C_FL_IXX 0x00000002 /* output Xon/Xoff flow control */
+#define C_FL_OIXANY 0x00000004 /* output Xon/Xoff (any xon) */
+#define C_FL_SWFLOW 0x0000000f
+
+/* flow status */
+
+#define C_FS_TXIDLE 0x00000000 /* no Tx data in the buffer or UART */
+#define C_FS_SENDING 0x00000001 /* UART is sending data */
+#define C_FS_SWFLOW 0x00000002 /* Tx is stopped by received Xoff */
+
+/* rs_control/rs_status RS-232 signals */
+
+#define C_RS_PARAM 0x80000000 /* Indicates presence of parameter in
+ IOCTLM command */
+#define C_RS_RTS 0x00000001 /* RTS */
+#define C_RS_DTR 0x00000004 /* DTR */
+#define C_RS_DCD 0x00000100 /* CD */
+#define C_RS_DSR 0x00000200 /* DSR */
+#define C_RS_RI 0x00000400 /* RI */
+#define C_RS_CTS 0x00000800 /* CTS */
+
+/* commands Host <-> Board */
+
+#define C_CM_RESET 0x01 /* reset/flush buffers */
+#define C_CM_IOCTL 0x02 /* re-read CH_CTRL */
+#define C_CM_IOCTLW 0x03 /* re-read CH_CTRL, intr when done */
+#define C_CM_IOCTLM 0x04 /* RS-232 outputs change */
+#define C_CM_SENDXOFF 0x10 /* send Xoff */
+#define C_CM_SENDXON 0x11 /* send Xon */
+#define C_CM_CLFLOW 0x12 /* Clear flow control (resume) */
+#define C_CM_SENDBRK 0x41 /* send break */
+#define C_CM_INTBACK 0x42 /* Interrupt back */
+#define C_CM_SET_BREAK 0x43 /* Tx break on */
+#define C_CM_CLR_BREAK 0x44 /* Tx break off */
+#define C_CM_CMD_DONE 0x45 /* Previous command done */
+#define C_CM_INTBACK2 0x46 /* Alternate Interrupt back */
+#define C_CM_TINACT 0x51 /* set inactivity detection */
+#define C_CM_IRQ_ENBL 0x52 /* enable generation of interrupts */
+#define C_CM_IRQ_DSBL 0x53 /* disable generation of interrupts */
+#define C_CM_ACK_ENBL 0x54 /* enable acknowledged interrupt mode */
+#define C_CM_ACK_DSBL 0x55 /* disable acknowledged intr mode */
+#define C_CM_FLUSH_RX 0x56 /* flushes Rx buffer */
+#define C_CM_FLUSH_TX 0x57 /* flushes Tx buffer */
+#define C_CM_Q_ENABLE 0x58 /* enables queue access from the
+ driver */
+#define C_CM_Q_DISABLE 0x59 /* disables queue access from the
+ driver */
+
+#define C_CM_TXBEMPTY 0x60 /* Tx buffer is empty */
+#define C_CM_TXLOWWM 0x61 /* Tx buffer low water mark */
+#define C_CM_RXHIWM 0x62 /* Rx buffer high water mark */
+#define C_CM_RXNNDT 0x63 /* rx no new data timeout */
+#define C_CM_TXFEMPTY 0x64
+#define C_CM_ICHAR 0x65
+#define C_CM_MDCD 0x70 /* modem DCD change */
+#define C_CM_MDSR 0x71 /* modem DSR change */
+#define C_CM_MRI 0x72 /* modem RI change */
+#define C_CM_MCTS 0x73 /* modem CTS change */
+#define C_CM_MRTS 0x74 /* modem RTS drop */
+#define C_CM_RXBRK 0x84 /* Break received */
+#define C_CM_PR_ERROR 0x85 /* Parity error */
+#define C_CM_FR_ERROR 0x86 /* Frame error */
+#define C_CM_OVR_ERROR 0x87 /* Overrun error */
+#define C_CM_RXOFL 0x88 /* RX buffer overflow */
+#define C_CM_CMDERROR 0x90 /* command error */
+#define C_CM_FATAL 0x91 /* fatal error */
+#define C_CM_HW_RESET 0x92 /* reset board */
+
+/*
+ * CH_CTRL - This per port structure contains all parameters
+ * that control an specific port. It can be seen as the
+ * configuration registers of a "super-serial-controller".
+ */
+
+struct CH_CTRL {
+ __u32 op_mode; /* operation mode */
+ __u32 intr_enable; /* interrupt masking */
+ __u32 sw_flow; /* SW flow control */
+ __u32 flow_status; /* output flow status */
+ __u32 comm_baud; /* baud rate - numerically specified */
+ __u32 comm_parity; /* parity */
+ __u32 comm_data_l; /* data length/stop */
+ __u32 comm_flags; /* other flags */
+ __u32 hw_flow; /* HW flow control */
+ __u32 rs_control; /* RS-232 outputs */
+ __u32 rs_status; /* RS-232 inputs */
+ __u32 flow_xon; /* xon char */
+ __u32 flow_xoff; /* xoff char */
+ __u32 hw_overflow; /* hw overflow counter */
+ __u32 sw_overflow; /* sw overflow counter */
+ __u32 comm_error; /* frame/parity error counter */
+ __u32 ichar;
+ __u32 filler[7];
+};
+
+
+/*
+ * BUF_CTRL - This per channel structure contains
+ * all Tx and Rx buffer control for a given channel.
+ */
+
+struct BUF_CTRL {
+ __u32 flag_dma; /* buffers are in Host memory */
+ __u32 tx_bufaddr; /* address of the tx buffer */
+ __u32 tx_bufsize; /* tx buffer size */
+ __u32 tx_threshold; /* tx low water mark */
+ __u32 tx_get; /* tail index tx buf */
+ __u32 tx_put; /* head index tx buf */
+ __u32 rx_bufaddr; /* address of the rx buffer */
+ __u32 rx_bufsize; /* rx buffer size */
+ __u32 rx_threshold; /* rx high water mark */
+ __u32 rx_get; /* tail index rx buf */
+ __u32 rx_put; /* head index rx buf */
+ __u32 filler[5]; /* filler to align structures */
+};
+
+/*
+ * BOARD_CTRL - This per board structure contains all global
+ * control fields related to the board.
+ */
+
+struct BOARD_CTRL {
+
+ /* static info provided by the on-board CPU */
+ __u32 n_channel; /* number of channels */
+ __u32 fw_version; /* firmware version */
+
+ /* static info provided by the driver */
+ __u32 op_system; /* op_system id */
+ __u32 dr_version; /* driver version */
+
+ /* board control area */
+ __u32 inactivity; /* inactivity control */
+
+ /* host to FW commands */
+ __u32 hcmd_channel; /* channel number */
+ __u32 hcmd_param; /* pointer to parameters */
+
+ /* FW to Host commands */
+ __u32 fwcmd_channel; /* channel number */
+ __u32 fwcmd_param; /* pointer to parameters */
+ __u32 zf_int_queue_addr; /* offset for INT_QUEUE structure */
+
+ /* filler so the structures are aligned */
+ __u32 filler[6];
+};
+
+/* Host Interrupt Queue */
+
+#define QUEUE_SIZE (10*MAX_CHAN)
+
+struct INT_QUEUE {
+ unsigned char intr_code[QUEUE_SIZE];
+ unsigned long channel[QUEUE_SIZE];
+ unsigned long param[QUEUE_SIZE];
+ unsigned long put;
+ unsigned long get;
+};
+
+/*
+ * ZFW_CTRL - This is the data structure that includes all other
+ * data structures used by the Firmware.
+ */
+
+struct ZFW_CTRL {
+ struct BOARD_CTRL board_ctrl;
+ struct CH_CTRL ch_ctrl[MAX_CHAN];
+ struct BUF_CTRL buf_ctrl[MAX_CHAN];
+};
+
+/****************** ****************** *******************/
+#endif
+
+#endif /* _UAPI_LINUX_CYCLADES_H */
diff --git a/include/linux/cycx_cfm.h b/include/uapi/linux/cycx_cfm.h
similarity index 100%
rename from include/linux/cycx_cfm.h
rename to include/uapi/linux/cycx_cfm.h
diff --git a/include/linux/dcbnl.h b/include/uapi/linux/dcbnl.h
similarity index 100%
rename from include/linux/dcbnl.h
rename to include/uapi/linux/dcbnl.h
diff --git a/include/uapi/linux/dccp.h b/include/uapi/linux/dccp.h
new file mode 100644
index 0000000..52a9cd7
--- /dev/null
+++ b/include/uapi/linux/dccp.h
@@ -0,0 +1,237 @@
+#ifndef _UAPI_LINUX_DCCP_H
+#define _UAPI_LINUX_DCCP_H
+
+#include <linux/types.h>
+#include <asm/byteorder.h>
+
+/**
+ * struct dccp_hdr - generic part of DCCP packet header
+ *
+ * @dccph_sport - Relevant port on the endpoint that sent this packet
+ * @dccph_dport - Relevant port on the other endpoint
+ * @dccph_doff - Data Offset from the start of the DCCP header, in 32-bit words
+ * @dccph_ccval - Used by the HC-Sender CCID
+ * @dccph_cscov - Parts of the packet that are covered by the Checksum field
+ * @dccph_checksum - Internet checksum, depends on dccph_cscov
+ * @dccph_x - 0 = 24 bit sequence number, 1 = 48
+ * @dccph_type - packet type, see DCCP_PKT_ prefixed macros
+ * @dccph_seq - sequence number high or low order 24 bits, depends on dccph_x
+ */
+struct dccp_hdr {
+ __be16 dccph_sport,
+ dccph_dport;
+ __u8 dccph_doff;
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+ __u8 dccph_cscov:4,
+ dccph_ccval:4;
+#elif defined(__BIG_ENDIAN_BITFIELD)
+ __u8 dccph_ccval:4,
+ dccph_cscov:4;
+#else
+#error "Adjust your <asm/byteorder.h> defines"
+#endif
+ __sum16 dccph_checksum;
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+ __u8 dccph_x:1,
+ dccph_type:4,
+ dccph_reserved:3;
+#elif defined(__BIG_ENDIAN_BITFIELD)
+ __u8 dccph_reserved:3,
+ dccph_type:4,
+ dccph_x:1;
+#else
+#error "Adjust your <asm/byteorder.h> defines"
+#endif
+ __u8 dccph_seq2;
+ __be16 dccph_seq;
+};
+
+/**
+ * struct dccp_hdr_ext - the low bits of a 48 bit seq packet
+ *
+ * @dccph_seq_low - low 24 bits of a 48 bit seq packet
+ */
+struct dccp_hdr_ext {
+ __be32 dccph_seq_low;
+};
+
+/**
+ * struct dccp_hdr_request - Connection initiation request header
+ *
+ * @dccph_req_service - Service to which the client app wants to connect
+ */
+struct dccp_hdr_request {
+ __be32 dccph_req_service;
+};
+/**
+ * struct dccp_hdr_ack_bits - acknowledgment bits common to most packets
+ *
+ * @dccph_resp_ack_nr_high - 48 bit ack number high order bits, contains GSR
+ * @dccph_resp_ack_nr_low - 48 bit ack number low order bits, contains GSR
+ */
+struct dccp_hdr_ack_bits {
+ __be16 dccph_reserved1;
+ __be16 dccph_ack_nr_high;
+ __be32 dccph_ack_nr_low;
+};
+/**
+ * struct dccp_hdr_response - Connection initiation response header
+ *
+ * @dccph_resp_ack - 48 bit Acknowledgment Number Subheader (5.3)
+ * @dccph_resp_service - Echoes the Service Code on a received DCCP-Request
+ */
+struct dccp_hdr_response {
+ struct dccp_hdr_ack_bits dccph_resp_ack;
+ __be32 dccph_resp_service;
+};
+
+/**
+ * struct dccp_hdr_reset - Unconditionally shut down a connection
+ *
+ * @dccph_reset_ack - 48 bit Acknowledgment Number Subheader (5.6)
+ * @dccph_reset_code - one of %dccp_reset_codes
+ * @dccph_reset_data - the Data 1 ... Data 3 fields from 5.6
+ */
+struct dccp_hdr_reset {
+ struct dccp_hdr_ack_bits dccph_reset_ack;
+ __u8 dccph_reset_code,
+ dccph_reset_data[3];
+};
+
+enum dccp_pkt_type {
+ DCCP_PKT_REQUEST = 0,
+ DCCP_PKT_RESPONSE,
+ DCCP_PKT_DATA,
+ DCCP_PKT_ACK,
+ DCCP_PKT_DATAACK,
+ DCCP_PKT_CLOSEREQ,
+ DCCP_PKT_CLOSE,
+ DCCP_PKT_RESET,
+ DCCP_PKT_SYNC,
+ DCCP_PKT_SYNCACK,
+ DCCP_PKT_INVALID,
+};
+
+#define DCCP_NR_PKT_TYPES DCCP_PKT_INVALID
+
+static inline unsigned int dccp_packet_hdr_len(const __u8 type)
+{
+ if (type == DCCP_PKT_DATA)
+ return 0;
+ if (type == DCCP_PKT_DATAACK ||
+ type == DCCP_PKT_ACK ||
+ type == DCCP_PKT_SYNC ||
+ type == DCCP_PKT_SYNCACK ||
+ type == DCCP_PKT_CLOSE ||
+ type == DCCP_PKT_CLOSEREQ)
+ return sizeof(struct dccp_hdr_ack_bits);
+ if (type == DCCP_PKT_REQUEST)
+ return sizeof(struct dccp_hdr_request);
+ if (type == DCCP_PKT_RESPONSE)
+ return sizeof(struct dccp_hdr_response);
+ return sizeof(struct dccp_hdr_reset);
+}
+enum dccp_reset_codes {
+ DCCP_RESET_CODE_UNSPECIFIED = 0,
+ DCCP_RESET_CODE_CLOSED,
+ DCCP_RESET_CODE_ABORTED,
+ DCCP_RESET_CODE_NO_CONNECTION,
+ DCCP_RESET_CODE_PACKET_ERROR,
+ DCCP_RESET_CODE_OPTION_ERROR,
+ DCCP_RESET_CODE_MANDATORY_ERROR,
+ DCCP_RESET_CODE_CONNECTION_REFUSED,
+ DCCP_RESET_CODE_BAD_SERVICE_CODE,
+ DCCP_RESET_CODE_TOO_BUSY,
+ DCCP_RESET_CODE_BAD_INIT_COOKIE,
+ DCCP_RESET_CODE_AGGRESSION_PENALTY,
+
+ DCCP_MAX_RESET_CODES /* Leave at the end! */
+};
+
+/* DCCP options */
+enum {
+ DCCPO_PADDING = 0,
+ DCCPO_MANDATORY = 1,
+ DCCPO_MIN_RESERVED = 3,
+ DCCPO_MAX_RESERVED = 31,
+ DCCPO_CHANGE_L = 32,
+ DCCPO_CONFIRM_L = 33,
+ DCCPO_CHANGE_R = 34,
+ DCCPO_CONFIRM_R = 35,
+ DCCPO_NDP_COUNT = 37,
+ DCCPO_ACK_VECTOR_0 = 38,
+ DCCPO_ACK_VECTOR_1 = 39,
+ DCCPO_TIMESTAMP = 41,
+ DCCPO_TIMESTAMP_ECHO = 42,
+ DCCPO_ELAPSED_TIME = 43,
+ DCCPO_MAX = 45,
+ DCCPO_MIN_RX_CCID_SPECIFIC = 128, /* from sender to receiver */
+ DCCPO_MAX_RX_CCID_SPECIFIC = 191,
+ DCCPO_MIN_TX_CCID_SPECIFIC = 192, /* from receiver to sender */
+ DCCPO_MAX_TX_CCID_SPECIFIC = 255,
+};
+/* maximum size of a single TLV-encoded DCCP option (sans type/len bytes) */
+#define DCCP_SINGLE_OPT_MAXLEN 253
+
+/* DCCP CCIDS */
+enum {
+ DCCPC_CCID2 = 2,
+ DCCPC_CCID3 = 3,
+};
+
+/* DCCP features (RFC 4340 section 6.4) */
+enum dccp_feature_numbers {
+ DCCPF_RESERVED = 0,
+ DCCPF_CCID = 1,
+ DCCPF_SHORT_SEQNOS = 2,
+ DCCPF_SEQUENCE_WINDOW = 3,
+ DCCPF_ECN_INCAPABLE = 4,
+ DCCPF_ACK_RATIO = 5,
+ DCCPF_SEND_ACK_VECTOR = 6,
+ DCCPF_SEND_NDP_COUNT = 7,
+ DCCPF_MIN_CSUM_COVER = 8,
+ DCCPF_DATA_CHECKSUM = 9,
+ /* 10-127 reserved */
+ DCCPF_MIN_CCID_SPECIFIC = 128,
+ DCCPF_SEND_LEV_RATE = 192, /* RFC 4342, sec. 8.4 */
+ DCCPF_MAX_CCID_SPECIFIC = 255,
+};
+
+/* DCCP socket control message types for cmsg */
+enum dccp_cmsg_type {
+ DCCP_SCM_PRIORITY = 1,
+ DCCP_SCM_QPOLICY_MAX = 0xFFFF,
+ /* ^-- Up to here reserved exclusively for qpolicy parameters */
+ DCCP_SCM_MAX
+};
+
+/* DCCP priorities for outgoing/queued packets */
+enum dccp_packet_dequeueing_policy {
+ DCCPQ_POLICY_SIMPLE,
+ DCCPQ_POLICY_PRIO,
+ DCCPQ_POLICY_MAX
+};
+
+/* DCCP socket options */
+#define DCCP_SOCKOPT_PACKET_SIZE 1 /* XXX deprecated, without effect */
+#define DCCP_SOCKOPT_SERVICE 2
+#define DCCP_SOCKOPT_CHANGE_L 3
+#define DCCP_SOCKOPT_CHANGE_R 4
+#define DCCP_SOCKOPT_GET_CUR_MPS 5
+#define DCCP_SOCKOPT_SERVER_TIMEWAIT 6
+#define DCCP_SOCKOPT_SEND_CSCOV 10
+#define DCCP_SOCKOPT_RECV_CSCOV 11
+#define DCCP_SOCKOPT_AVAILABLE_CCIDS 12
+#define DCCP_SOCKOPT_CCID 13
+#define DCCP_SOCKOPT_TX_CCID 14
+#define DCCP_SOCKOPT_RX_CCID 15
+#define DCCP_SOCKOPT_QPOLICY_ID 16
+#define DCCP_SOCKOPT_QPOLICY_TXQLEN 17
+#define DCCP_SOCKOPT_CCID_RX_INFO 128
+#define DCCP_SOCKOPT_CCID_TX_INFO 192
+
+/* maximum number of services provided on the same listening port */
+#define DCCP_SERVICE_LIST_MAX_LEN 32
+
+
+#endif /* _UAPI_LINUX_DCCP_H */
diff --git a/include/uapi/linux/dlm.h b/include/uapi/linux/dlm.h
new file mode 100644
index 0000000..1f73cc0
--- /dev/null
+++ b/include/uapi/linux/dlm.h
@@ -0,0 +1,75 @@
+/******************************************************************************
+*******************************************************************************
+**
+** Copyright (C) Sistina Software, Inc. 1997-2003 All rights reserved.
+** Copyright (C) 2004-2011 Red Hat, Inc. All rights reserved.
+**
+** This copyrighted material is made available to anyone wishing to use,
+** modify, copy, or redistribute it subject to the terms and conditions
+** of the GNU General Public License v.2.
+**
+*******************************************************************************
+******************************************************************************/
+
+#ifndef _UAPI__DLM_DOT_H__
+#define _UAPI__DLM_DOT_H__
+
+/*
+ * Interface to Distributed Lock Manager (DLM)
+ * routines and structures to use DLM lockspaces
+ */
+
+/* Lock levels and flags are here */
+#include <linux/dlmconstants.h>
+#include <linux/types.h>
+
+typedef void dlm_lockspace_t;
+
+/*
+ * Lock status block
+ *
+ * Use this structure to specify the contents of the lock value block. For a
+ * conversion request, this structure is used to specify the lock ID of the
+ * lock. DLM writes the status of the lock request and the lock ID assigned
+ * to the request in the lock status block.
+ *
+ * sb_lkid: the returned lock ID. It is set on new (non-conversion) requests.
+ * It is available when dlm_lock returns.
+ *
+ * sb_lvbptr: saves or returns the contents of the lock's LVB according to rules
+ * shown for the DLM_LKF_VALBLK flag.
+ *
+ * sb_flags: DLM_SBF_DEMOTED is returned if in the process of promoting a lock,
+ * it was first demoted to NL to avoid conversion deadlock.
+ * DLM_SBF_VALNOTVALID is returned if the resource's LVB is marked invalid.
+ *
+ * sb_status: the returned status of the lock request set prior to AST
+ * execution. Possible return values:
+ *
+ * 0 if lock request was successful
+ * -EAGAIN if request would block and is flagged DLM_LKF_NOQUEUE
+ * -DLM_EUNLOCK if unlock request was successful
+ * -DLM_ECANCEL if a cancel completed successfully
+ * -EDEADLK if a deadlock was detected
+ * -ETIMEDOUT if the lock request was canceled due to a timeout
+ */
+
+#define DLM_SBF_DEMOTED 0x01
+#define DLM_SBF_VALNOTVALID 0x02
+#define DLM_SBF_ALTMODE 0x04
+
+struct dlm_lksb {
+ int sb_status;
+ __u32 sb_lkid;
+ char sb_flags;
+ char * sb_lvbptr;
+};
+
+/* dlm_new_lockspace() flags */
+
+#define DLM_LSFL_TIMEWARN 0x00000002
+#define DLM_LSFL_FS 0x00000004
+#define DLM_LSFL_NEWEXCL 0x00000008
+
+
+#endif /* _UAPI__DLM_DOT_H__ */
diff --git a/include/linux/dlm_device.h b/include/uapi/linux/dlm_device.h
similarity index 100%
rename from include/linux/dlm_device.h
rename to include/uapi/linux/dlm_device.h
diff --git a/include/linux/dlm_netlink.h b/include/uapi/linux/dlm_netlink.h
similarity index 100%
rename from include/linux/dlm_netlink.h
rename to include/uapi/linux/dlm_netlink.h
diff --git a/include/uapi/linux/dlm_plock.h b/include/uapi/linux/dlm_plock.h
new file mode 100644
index 0000000..6ae692c
--- /dev/null
+++ b/include/uapi/linux/dlm_plock.h
@@ -0,0 +1,45 @@
+/*
+ * Copyright (C) 2005-2008 Red Hat, Inc. All rights reserved.
+ *
+ * This copyrighted material is made available to anyone wishing to use,
+ * modify, copy, or redistribute it subject to the terms and conditions
+ * of the GNU General Public License v.2.
+ */
+
+#ifndef _UAPI__DLM_PLOCK_DOT_H__
+#define _UAPI__DLM_PLOCK_DOT_H__
+
+#include <linux/types.h>
+
+#define DLM_PLOCK_MISC_NAME "dlm_plock"
+
+#define DLM_PLOCK_VERSION_MAJOR 1
+#define DLM_PLOCK_VERSION_MINOR 2
+#define DLM_PLOCK_VERSION_PATCH 0
+
+enum {
+ DLM_PLOCK_OP_LOCK = 1,
+ DLM_PLOCK_OP_UNLOCK,
+ DLM_PLOCK_OP_GET,
+};
+
+#define DLM_PLOCK_FL_CLOSE 1
+
+struct dlm_plock_info {
+ __u32 version[3];
+ __u8 optype;
+ __u8 ex;
+ __u8 wait;
+ __u8 flags;
+ __u32 pid;
+ __s32 nodeid;
+ __s32 rv;
+ __u32 fsid;
+ __u64 number;
+ __u64 start;
+ __u64 end;
+ __u64 owner;
+};
+
+
+#endif /* _UAPI__DLM_PLOCK_DOT_H__ */
diff --git a/include/linux/dlmconstants.h b/include/uapi/linux/dlmconstants.h
similarity index 100%
rename from include/linux/dlmconstants.h
rename to include/uapi/linux/dlmconstants.h
diff --git a/include/linux/dm-ioctl.h b/include/uapi/linux/dm-ioctl.h
similarity index 100%
rename from include/linux/dm-ioctl.h
rename to include/uapi/linux/dm-ioctl.h
diff --git a/include/linux/dm-log-userspace.h b/include/uapi/linux/dm-log-userspace.h
similarity index 100%
rename from include/linux/dm-log-userspace.h
rename to include/uapi/linux/dm-log-userspace.h
diff --git a/include/linux/dn.h b/include/uapi/linux/dn.h
similarity index 100%
rename from include/linux/dn.h
rename to include/uapi/linux/dn.h
diff --git a/include/linux/dqblk_xfs.h b/include/uapi/linux/dqblk_xfs.h
similarity index 100%
rename from include/linux/dqblk_xfs.h
rename to include/uapi/linux/dqblk_xfs.h
diff --git a/include/uapi/linux/edd.h b/include/uapi/linux/edd.h
new file mode 100644
index 0000000..89240a0
--- /dev/null
+++ b/include/uapi/linux/edd.h
@@ -0,0 +1,191 @@
+/*
+ * linux/include/linux/edd.h
+ * Copyright (C) 2002, 2003, 2004 Dell Inc.
+ * by Matt Domsch <Matt_Domsch@dell.com>
+ *
+ * structures and definitions for the int 13h, ax={41,48}h
+ * BIOS Enhanced Disk Drive Services
+ * This is based on the T13 group document D1572 Revision 0 (August 14 2002)
+ * available at http://www.t13.org/docs2002/d1572r0.pdf. It is
+ * very similar to D1484 Revision 3 http://www.t13.org/docs2002/d1484r3.pdf
+ *
+ * In a nutshell, arch/{i386,x86_64}/boot/setup.S populates a scratch
+ * table in the boot_params that contains a list of BIOS-enumerated
+ * boot devices.
+ * In arch/{i386,x86_64}/kernel/setup.c, this information is
+ * transferred into the edd structure, and in drivers/firmware/edd.c, that
+ * information is used to identify BIOS boot disk. The code in setup.S
+ * is very sensitive to the size of these structures.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License v2.0 as published by
+ * the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+#ifndef _UAPI_LINUX_EDD_H
+#define _UAPI_LINUX_EDD_H
+
+#include <linux/types.h>
+
+#define EDDNR 0x1e9 /* addr of number of edd_info structs at EDDBUF
+ in boot_params - treat this as 1 byte */
+#define EDDBUF 0xd00 /* addr of edd_info structs in boot_params */
+#define EDDMAXNR 6 /* number of edd_info structs starting at EDDBUF */
+#define EDDEXTSIZE 8 /* change these if you muck with the structures */
+#define EDDPARMSIZE 74
+#define CHECKEXTENSIONSPRESENT 0x41
+#define GETDEVICEPARAMETERS 0x48
+#define LEGACYGETDEVICEPARAMETERS 0x08
+#define EDDMAGIC1 0x55AA
+#define EDDMAGIC2 0xAA55
+
+
+#define READ_SECTORS 0x02 /* int13 AH=0x02 is READ_SECTORS command */
+#define EDD_MBR_SIG_OFFSET 0x1B8 /* offset of signature in the MBR */
+#define EDD_MBR_SIG_BUF 0x290 /* addr in boot params */
+#define EDD_MBR_SIG_MAX 16 /* max number of signatures to store */
+#define EDD_MBR_SIG_NR_BUF 0x1ea /* addr of number of MBR signtaures at EDD_MBR_SIG_BUF
+ in boot_params - treat this as 1 byte */
+
+#ifndef __ASSEMBLY__
+
+#define EDD_EXT_FIXED_DISK_ACCESS (1 << 0)
+#define EDD_EXT_DEVICE_LOCKING_AND_EJECTING (1 << 1)
+#define EDD_EXT_ENHANCED_DISK_DRIVE_SUPPORT (1 << 2)
+#define EDD_EXT_64BIT_EXTENSIONS (1 << 3)
+
+#define EDD_INFO_DMA_BOUNDARY_ERROR_TRANSPARENT (1 << 0)
+#define EDD_INFO_GEOMETRY_VALID (1 << 1)
+#define EDD_INFO_REMOVABLE (1 << 2)
+#define EDD_INFO_WRITE_VERIFY (1 << 3)
+#define EDD_INFO_MEDIA_CHANGE_NOTIFICATION (1 << 4)
+#define EDD_INFO_LOCKABLE (1 << 5)
+#define EDD_INFO_NO_MEDIA_PRESENT (1 << 6)
+#define EDD_INFO_USE_INT13_FN50 (1 << 7)
+
+struct edd_device_params {
+ __u16 length;
+ __u16 info_flags;
+ __u32 num_default_cylinders;
+ __u32 num_default_heads;
+ __u32 sectors_per_track;
+ __u64 number_of_sectors;
+ __u16 bytes_per_sector;
+ __u32 dpte_ptr; /* 0xFFFFFFFF for our purposes */
+ __u16 key; /* = 0xBEDD */
+ __u8 device_path_info_length; /* = 44 */
+ __u8 reserved2;
+ __u16 reserved3;
+ __u8 host_bus_type[4];
+ __u8 interface_type[8];
+ union {
+ struct {
+ __u16 base_address;
+ __u16 reserved1;
+ __u32 reserved2;
+ } __attribute__ ((packed)) isa;
+ struct {
+ __u8 bus;
+ __u8 slot;
+ __u8 function;
+ __u8 channel;
+ __u32 reserved;
+ } __attribute__ ((packed)) pci;
+ /* pcix is same as pci */
+ struct {
+ __u64 reserved;
+ } __attribute__ ((packed)) ibnd;
+ struct {
+ __u64 reserved;
+ } __attribute__ ((packed)) xprs;
+ struct {
+ __u64 reserved;
+ } __attribute__ ((packed)) htpt;
+ struct {
+ __u64 reserved;
+ } __attribute__ ((packed)) unknown;
+ } interface_path;
+ union {
+ struct {
+ __u8 device;
+ __u8 reserved1;
+ __u16 reserved2;
+ __u32 reserved3;
+ __u64 reserved4;
+ } __attribute__ ((packed)) ata;
+ struct {
+ __u8 device;
+ __u8 lun;
+ __u8 reserved1;
+ __u8 reserved2;
+ __u32 reserved3;
+ __u64 reserved4;
+ } __attribute__ ((packed)) atapi;
+ struct {
+ __u16 id;
+ __u64 lun;
+ __u16 reserved1;
+ __u32 reserved2;
+ } __attribute__ ((packed)) scsi;
+ struct {
+ __u64 serial_number;
+ __u64 reserved;
+ } __attribute__ ((packed)) usb;
+ struct {
+ __u64 eui;
+ __u64 reserved;
+ } __attribute__ ((packed)) i1394;
+ struct {
+ __u64 wwid;
+ __u64 lun;
+ } __attribute__ ((packed)) fibre;
+ struct {
+ __u64 identity_tag;
+ __u64 reserved;
+ } __attribute__ ((packed)) i2o;
+ struct {
+ __u32 array_number;
+ __u32 reserved1;
+ __u64 reserved2;
+ } __attribute__ ((packed)) raid;
+ struct {
+ __u8 device;
+ __u8 reserved1;
+ __u16 reserved2;
+ __u32 reserved3;
+ __u64 reserved4;
+ } __attribute__ ((packed)) sata;
+ struct {
+ __u64 reserved1;
+ __u64 reserved2;
+ } __attribute__ ((packed)) unknown;
+ } device_path;
+ __u8 reserved4;
+ __u8 checksum;
+} __attribute__ ((packed));
+
+struct edd_info {
+ __u8 device;
+ __u8 version;
+ __u16 interface_support;
+ __u16 legacy_max_cylinder;
+ __u8 legacy_max_head;
+ __u8 legacy_sectors_per_track;
+ struct edd_device_params params;
+} __attribute__ ((packed));
+
+struct edd {
+ unsigned int mbr_signature[EDD_MBR_SIG_MAX];
+ struct edd_info edd_info[EDDMAXNR];
+ unsigned char mbr_signature_nr;
+ unsigned char edd_info_nr;
+};
+
+#endif /*!__ASSEMBLY__ */
+
+#endif /* _UAPI_LINUX_EDD_H */
diff --git a/include/linux/efs_fs_sb.h b/include/uapi/linux/efs_fs_sb.h
similarity index 100%
rename from include/linux/efs_fs_sb.h
rename to include/uapi/linux/efs_fs_sb.h
diff --git a/include/linux/elf-em.h b/include/uapi/linux/elf-em.h
similarity index 100%
rename from include/linux/elf-em.h
rename to include/uapi/linux/elf-em.h
diff --git a/include/linux/elf-fdpic.h b/include/uapi/linux/elf-fdpic.h
similarity index 99%
rename from include/linux/elf-fdpic.h
rename to include/uapi/linux/elf-fdpic.h
index 7cd2e80..1065078 100644
--- a/include/linux/elf-fdpic.h
+++ b/include/uapi/linux/elf-fdpic.h
@@ -31,6 +31,7 @@
#define ELF32_FDPIC_LOADMAP_VERSION 0x0000
+#ifndef __KERNEL__
/*
* binfmt binary parameters structure
*/
@@ -58,7 +59,6 @@
#define ELF_FDPIC_FLAG_PRESENT 0x80000000 /* T if this object is present */
};
-#ifdef __KERNEL__
#ifdef CONFIG_MMU
extern void elf_fdpic_arch_lay_out_mm(struct elf_fdpic_params *exec_params,
struct elf_fdpic_params *interp_params,
diff --git a/include/uapi/linux/elf.h b/include/uapi/linux/elf.h
new file mode 100644
index 0000000..126a817
--- /dev/null
+++ b/include/uapi/linux/elf.h
@@ -0,0 +1,414 @@
+#ifndef _UAPI_LINUX_ELF_H
+#define _UAPI_LINUX_ELF_H
+
+#include <linux/types.h>
+#include <linux/elf-em.h>
+
+/* 32-bit ELF base types. */
+typedef __u32 Elf32_Addr;
+typedef __u16 Elf32_Half;
+typedef __u32 Elf32_Off;
+typedef __s32 Elf32_Sword;
+typedef __u32 Elf32_Word;
+
+/* 64-bit ELF base types. */
+typedef __u64 Elf64_Addr;
+typedef __u16 Elf64_Half;
+typedef __s16 Elf64_SHalf;
+typedef __u64 Elf64_Off;
+typedef __s32 Elf64_Sword;
+typedef __u32 Elf64_Word;
+typedef __u64 Elf64_Xword;
+typedef __s64 Elf64_Sxword;
+
+/* These constants are for the segment types stored in the image headers */
+#define PT_NULL 0
+#define PT_LOAD 1
+#define PT_DYNAMIC 2
+#define PT_INTERP 3
+#define PT_NOTE 4
+#define PT_SHLIB 5
+#define PT_PHDR 6
+#define PT_TLS 7 /* Thread local storage segment */
+#define PT_LOOS 0x60000000 /* OS-specific */
+#define PT_HIOS 0x6fffffff /* OS-specific */
+#define PT_LOPROC 0x70000000
+#define PT_HIPROC 0x7fffffff
+#define PT_GNU_EH_FRAME 0x6474e550
+
+#define PT_GNU_STACK (PT_LOOS + 0x474e551)
+
+/*
+ * Extended Numbering
+ *
+ * If the real number of program header table entries is larger than
+ * or equal to PN_XNUM(0xffff), it is set to sh_info field of the
+ * section header at index 0, and PN_XNUM is set to e_phnum
+ * field. Otherwise, the section header at index 0 is zero
+ * initialized, if it exists.
+ *
+ * Specifications are available in:
+ *
+ * - Sun microsystems: Linker and Libraries.
+ * Part No: 817-1984-17, September 2008.
+ * URL: http://docs.sun.com/app/docs/doc/817-1984
+ *
+ * - System V ABI AMD64 Architecture Processor Supplement
+ * Draft Version 0.99.,
+ * May 11, 2009.
+ * URL: http://www.x86-64.org/
+ */
+#define PN_XNUM 0xffff
+
+/* These constants define the different elf file types */
+#define ET_NONE 0
+#define ET_REL 1
+#define ET_EXEC 2
+#define ET_DYN 3
+#define ET_CORE 4
+#define ET_LOPROC 0xff00
+#define ET_HIPROC 0xffff
+
+/* This is the info that is needed to parse the dynamic section of the file */
+#define DT_NULL 0
+#define DT_NEEDED 1
+#define DT_PLTRELSZ 2
+#define DT_PLTGOT 3
+#define DT_HASH 4
+#define DT_STRTAB 5
+#define DT_SYMTAB 6
+#define DT_RELA 7
+#define DT_RELASZ 8
+#define DT_RELAENT 9
+#define DT_STRSZ 10
+#define DT_SYMENT 11
+#define DT_INIT 12
+#define DT_FINI 13
+#define DT_SONAME 14
+#define DT_RPATH 15
+#define DT_SYMBOLIC 16
+#define DT_REL 17
+#define DT_RELSZ 18
+#define DT_RELENT 19
+#define DT_PLTREL 20
+#define DT_DEBUG 21
+#define DT_TEXTREL 22
+#define DT_JMPREL 23
+#define DT_ENCODING 32
+#define OLD_DT_LOOS 0x60000000
+#define DT_LOOS 0x6000000d
+#define DT_HIOS 0x6ffff000
+#define DT_VALRNGLO 0x6ffffd00
+#define DT_VALRNGHI 0x6ffffdff
+#define DT_ADDRRNGLO 0x6ffffe00
+#define DT_ADDRRNGHI 0x6ffffeff
+#define DT_VERSYM 0x6ffffff0
+#define DT_RELACOUNT 0x6ffffff9
+#define DT_RELCOUNT 0x6ffffffa
+#define DT_FLAGS_1 0x6ffffffb
+#define DT_VERDEF 0x6ffffffc
+#define DT_VERDEFNUM 0x6ffffffd
+#define DT_VERNEED 0x6ffffffe
+#define DT_VERNEEDNUM 0x6fffffff
+#define OLD_DT_HIOS 0x6fffffff
+#define DT_LOPROC 0x70000000
+#define DT_HIPROC 0x7fffffff
+
+/* This info is needed when parsing the symbol table */
+#define STB_LOCAL 0
+#define STB_GLOBAL 1
+#define STB_WEAK 2
+
+#define STT_NOTYPE 0
+#define STT_OBJECT 1
+#define STT_FUNC 2
+#define STT_SECTION 3
+#define STT_FILE 4
+#define STT_COMMON 5
+#define STT_TLS 6
+
+#define ELF_ST_BIND(x) ((x) >> 4)
+#define ELF_ST_TYPE(x) (((unsigned int) x) & 0xf)
+#define ELF32_ST_BIND(x) ELF_ST_BIND(x)
+#define ELF32_ST_TYPE(x) ELF_ST_TYPE(x)
+#define ELF64_ST_BIND(x) ELF_ST_BIND(x)
+#define ELF64_ST_TYPE(x) ELF_ST_TYPE(x)
+
+typedef struct dynamic{
+ Elf32_Sword d_tag;
+ union{
+ Elf32_Sword d_val;
+ Elf32_Addr d_ptr;
+ } d_un;
+} Elf32_Dyn;
+
+typedef struct {
+ Elf64_Sxword d_tag; /* entry tag value */
+ union {
+ Elf64_Xword d_val;
+ Elf64_Addr d_ptr;
+ } d_un;
+} Elf64_Dyn;
+
+/* The following are used with relocations */
+#define ELF32_R_SYM(x) ((x) >> 8)
+#define ELF32_R_TYPE(x) ((x) & 0xff)
+
+#define ELF64_R_SYM(i) ((i) >> 32)
+#define ELF64_R_TYPE(i) ((i) & 0xffffffff)
+
+typedef struct elf32_rel {
+ Elf32_Addr r_offset;
+ Elf32_Word r_info;
+} Elf32_Rel;
+
+typedef struct elf64_rel {
+ Elf64_Addr r_offset; /* Location at which to apply the action */
+ Elf64_Xword r_info; /* index and type of relocation */
+} Elf64_Rel;
+
+typedef struct elf32_rela{
+ Elf32_Addr r_offset;
+ Elf32_Word r_info;
+ Elf32_Sword r_addend;
+} Elf32_Rela;
+
+typedef struct elf64_rela {
+ Elf64_Addr r_offset; /* Location at which to apply the action */
+ Elf64_Xword r_info; /* index and type of relocation */
+ Elf64_Sxword r_addend; /* Constant addend used to compute value */
+} Elf64_Rela;
+
+typedef struct elf32_sym{
+ Elf32_Word st_name;
+ Elf32_Addr st_value;
+ Elf32_Word st_size;
+ unsigned char st_info;
+ unsigned char st_other;
+ Elf32_Half st_shndx;
+} Elf32_Sym;
+
+typedef struct elf64_sym {
+ Elf64_Word st_name; /* Symbol name, index in string tbl */
+ unsigned char st_info; /* Type and binding attributes */
+ unsigned char st_other; /* No defined meaning, 0 */
+ Elf64_Half st_shndx; /* Associated section index */
+ Elf64_Addr st_value; /* Value of the symbol */
+ Elf64_Xword st_size; /* Associated symbol size */
+} Elf64_Sym;
+
+
+#define EI_NIDENT 16
+
+typedef struct elf32_hdr{
+ unsigned char e_ident[EI_NIDENT];
+ Elf32_Half e_type;
+ Elf32_Half e_machine;
+ Elf32_Word e_version;
+ Elf32_Addr e_entry; /* Entry point */
+ Elf32_Off e_phoff;
+ Elf32_Off e_shoff;
+ Elf32_Word e_flags;
+ Elf32_Half e_ehsize;
+ Elf32_Half e_phentsize;
+ Elf32_Half e_phnum;
+ Elf32_Half e_shentsize;
+ Elf32_Half e_shnum;
+ Elf32_Half e_shstrndx;
+} Elf32_Ehdr;
+
+typedef struct elf64_hdr {
+ unsigned char e_ident[EI_NIDENT]; /* ELF "magic number" */
+ Elf64_Half e_type;
+ Elf64_Half e_machine;
+ Elf64_Word e_version;
+ Elf64_Addr e_entry; /* Entry point virtual address */
+ Elf64_Off e_phoff; /* Program header table file offset */
+ Elf64_Off e_shoff; /* Section header table file offset */
+ Elf64_Word e_flags;
+ Elf64_Half e_ehsize;
+ Elf64_Half e_phentsize;
+ Elf64_Half e_phnum;
+ Elf64_Half e_shentsize;
+ Elf64_Half e_shnum;
+ Elf64_Half e_shstrndx;
+} Elf64_Ehdr;
+
+/* These constants define the permissions on sections in the program
+ header, p_flags. */
+#define PF_R 0x4
+#define PF_W 0x2
+#define PF_X 0x1
+
+typedef struct elf32_phdr{
+ Elf32_Word p_type;
+ Elf32_Off p_offset;
+ Elf32_Addr p_vaddr;
+ Elf32_Addr p_paddr;
+ Elf32_Word p_filesz;
+ Elf32_Word p_memsz;
+ Elf32_Word p_flags;
+ Elf32_Word p_align;
+} Elf32_Phdr;
+
+typedef struct elf64_phdr {
+ Elf64_Word p_type;
+ Elf64_Word p_flags;
+ Elf64_Off p_offset; /* Segment file offset */
+ Elf64_Addr p_vaddr; /* Segment virtual address */
+ Elf64_Addr p_paddr; /* Segment physical address */
+ Elf64_Xword p_filesz; /* Segment size in file */
+ Elf64_Xword p_memsz; /* Segment size in memory */
+ Elf64_Xword p_align; /* Segment alignment, file & memory */
+} Elf64_Phdr;
+
+/* sh_type */
+#define SHT_NULL 0
+#define SHT_PROGBITS 1
+#define SHT_SYMTAB 2
+#define SHT_STRTAB 3
+#define SHT_RELA 4
+#define SHT_HASH 5
+#define SHT_DYNAMIC 6
+#define SHT_NOTE 7
+#define SHT_NOBITS 8
+#define SHT_REL 9
+#define SHT_SHLIB 10
+#define SHT_DYNSYM 11
+#define SHT_NUM 12
+#define SHT_LOPROC 0x70000000
+#define SHT_HIPROC 0x7fffffff
+#define SHT_LOUSER 0x80000000
+#define SHT_HIUSER 0xffffffff
+
+/* sh_flags */
+#define SHF_WRITE 0x1
+#define SHF_ALLOC 0x2
+#define SHF_EXECINSTR 0x4
+#define SHF_MASKPROC 0xf0000000
+
+/* special section indexes */
+#define SHN_UNDEF 0
+#define SHN_LORESERVE 0xff00
+#define SHN_LOPROC 0xff00
+#define SHN_HIPROC 0xff1f
+#define SHN_ABS 0xfff1
+#define SHN_COMMON 0xfff2
+#define SHN_HIRESERVE 0xffff
+
+typedef struct elf32_shdr {
+ Elf32_Word sh_name;
+ Elf32_Word sh_type;
+ Elf32_Word sh_flags;
+ Elf32_Addr sh_addr;
+ Elf32_Off sh_offset;
+ Elf32_Word sh_size;
+ Elf32_Word sh_link;
+ Elf32_Word sh_info;
+ Elf32_Word sh_addralign;
+ Elf32_Word sh_entsize;
+} Elf32_Shdr;
+
+typedef struct elf64_shdr {
+ Elf64_Word sh_name; /* Section name, index in string tbl */
+ Elf64_Word sh_type; /* Type of section */
+ Elf64_Xword sh_flags; /* Miscellaneous section attributes */
+ Elf64_Addr sh_addr; /* Section virtual addr at execution */
+ Elf64_Off sh_offset; /* Section file offset */
+ Elf64_Xword sh_size; /* Size of section in bytes */
+ Elf64_Word sh_link; /* Index of another section */
+ Elf64_Word sh_info; /* Additional section information */
+ Elf64_Xword sh_addralign; /* Section alignment */
+ Elf64_Xword sh_entsize; /* Entry size if section holds table */
+} Elf64_Shdr;
+
+#define EI_MAG0 0 /* e_ident[] indexes */
+#define EI_MAG1 1
+#define EI_MAG2 2
+#define EI_MAG3 3
+#define EI_CLASS 4
+#define EI_DATA 5
+#define EI_VERSION 6
+#define EI_OSABI 7
+#define EI_PAD 8
+
+#define ELFMAG0 0x7f /* EI_MAG */
+#define ELFMAG1 'E'
+#define ELFMAG2 'L'
+#define ELFMAG3 'F'
+#define ELFMAG "\177ELF"
+#define SELFMAG 4
+
+#define ELFCLASSNONE 0 /* EI_CLASS */
+#define ELFCLASS32 1
+#define ELFCLASS64 2
+#define ELFCLASSNUM 3
+
+#define ELFDATANONE 0 /* e_ident[EI_DATA] */
+#define ELFDATA2LSB 1
+#define ELFDATA2MSB 2
+
+#define EV_NONE 0 /* e_version, EI_VERSION */
+#define EV_CURRENT 1
+#define EV_NUM 2
+
+#define ELFOSABI_NONE 0
+#define ELFOSABI_LINUX 3
+
+#ifndef ELF_OSABI
+#define ELF_OSABI ELFOSABI_NONE
+#endif
+
+/*
+ * Notes used in ET_CORE. Architectures export some of the arch register sets
+ * using the corresponding note types via the PTRACE_GETREGSET and
+ * PTRACE_SETREGSET requests.
+ */
+#define NT_PRSTATUS 1
+#define NT_PRFPREG 2
+#define NT_PRPSINFO 3
+#define NT_TASKSTRUCT 4
+#define NT_AUXV 6
+/*
+ * Note to userspace developers: size of NT_SIGINFO note may increase
+ * in the future to accomodate more fields, don't assume it is fixed!
+ */
+#define NT_SIGINFO 0x53494749
+#define NT_FILE 0x46494c45
+#define NT_PRXFPREG 0x46e62b7f /* copied from gdb5.1/include/elf/common.h */
+#define NT_PPC_VMX 0x100 /* PowerPC Altivec/VMX registers */
+#define NT_PPC_SPE 0x101 /* PowerPC SPE/EVR registers */
+#define NT_PPC_VSX 0x102 /* PowerPC VSX registers */
+#define NT_386_TLS 0x200 /* i386 TLS slots (struct user_desc) */
+#define NT_386_IOPERM 0x201 /* x86 io permission bitmap (1=deny) */
+#define NT_X86_XSTATE 0x202 /* x86 extended state using xsave */
+#define NT_S390_HIGH_GPRS 0x300 /* s390 upper register halves */
+#define NT_S390_TIMER 0x301 /* s390 timer register */
+#define NT_S390_TODCMP 0x302 /* s390 TOD clock comparator register */
+#define NT_S390_TODPREG 0x303 /* s390 TOD programmable register */
+#define NT_S390_CTRS 0x304 /* s390 control registers */
+#define NT_S390_PREFIX 0x305 /* s390 prefix register */
+#define NT_S390_LAST_BREAK 0x306 /* s390 breaking event address */
+#define NT_S390_SYSTEM_CALL 0x307 /* s390 system call restart data */
+#define NT_S390_TDB 0x308 /* s390 transaction diagnostic block */
+#define NT_ARM_VFP 0x400 /* ARM VFP/NEON registers */
+#define NT_ARM_TLS 0x401 /* ARM TLS register */
+#define NT_ARM_HW_BREAK 0x402 /* ARM hardware breakpoint registers */
+#define NT_ARM_HW_WATCH 0x403 /* ARM hardware watchpoint registers */
+
+
+/* Note header in a PT_NOTE section */
+typedef struct elf32_note {
+ Elf32_Word n_namesz; /* Name size */
+ Elf32_Word n_descsz; /* Content size */
+ Elf32_Word n_type; /* Content type */
+} Elf32_Nhdr;
+
+/* Note header in a PT_NOTE section */
+typedef struct elf64_note {
+ Elf64_Word n_namesz; /* Name size */
+ Elf64_Word n_descsz; /* Content size */
+ Elf64_Word n_type; /* Content type */
+} Elf64_Nhdr;
+
+#endif /* _UAPI_LINUX_ELF_H */
diff --git a/include/uapi/linux/elfcore.h b/include/uapi/linux/elfcore.h
new file mode 100644
index 0000000..569737c
--- /dev/null
+++ b/include/uapi/linux/elfcore.h
@@ -0,0 +1,100 @@
+#ifndef _UAPI_LINUX_ELFCORE_H
+#define _UAPI_LINUX_ELFCORE_H
+
+#include <linux/types.h>
+#include <linux/signal.h>
+#include <linux/time.h>
+#include <linux/ptrace.h>
+#include <linux/elf.h>
+#include <linux/fs.h>
+
+struct elf_siginfo
+{
+ int si_signo; /* signal number */
+ int si_code; /* extra code */
+ int si_errno; /* errno */
+};
+
+
+#ifndef __KERNEL__
+typedef elf_greg_t greg_t;
+typedef elf_gregset_t gregset_t;
+typedef elf_fpregset_t fpregset_t;
+typedef elf_fpxregset_t fpxregset_t;
+#define NGREG ELF_NGREG
+#endif
+
+/*
+ * Definitions to generate Intel SVR4-like core files.
+ * These mostly have the same names as the SVR4 types with "elf_"
+ * tacked on the front to prevent clashes with linux definitions,
+ * and the typedef forms have been avoided. This is mostly like
+ * the SVR4 structure, but more Linuxy, with things that Linux does
+ * not support and which gdb doesn't really use excluded.
+ * Fields present but not used are marked with "XXX".
+ */
+struct elf_prstatus
+{
+#if 0
+ long pr_flags; /* XXX Process flags */
+ short pr_why; /* XXX Reason for process halt */
+ short pr_what; /* XXX More detailed reason */
+#endif
+ struct elf_siginfo pr_info; /* Info associated with signal */
+ short pr_cursig; /* Current signal */
+ unsigned long pr_sigpend; /* Set of pending signals */
+ unsigned long pr_sighold; /* Set of held signals */
+#if 0
+ struct sigaltstack pr_altstack; /* Alternate stack info */
+ struct sigaction pr_action; /* Signal action for current sig */
+#endif
+ pid_t pr_pid;
+ pid_t pr_ppid;
+ pid_t pr_pgrp;
+ pid_t pr_sid;
+ struct timeval pr_utime; /* User time */
+ struct timeval pr_stime; /* System time */
+ struct timeval pr_cutime; /* Cumulative user time */
+ struct timeval pr_cstime; /* Cumulative system time */
+#if 0
+ long pr_instr; /* Current instruction */
+#endif
+ elf_gregset_t pr_reg; /* GP registers */
+#ifdef CONFIG_BINFMT_ELF_FDPIC
+ /* When using FDPIC, the loadmap addresses need to be communicated
+ * to GDB in order for GDB to do the necessary relocations. The
+ * fields (below) used to communicate this information are placed
+ * immediately after ``pr_reg'', so that the loadmap addresses may
+ * be viewed as part of the register set if so desired.
+ */
+ unsigned long pr_exec_fdpic_loadmap;
+ unsigned long pr_interp_fdpic_loadmap;
+#endif
+ int pr_fpvalid; /* True if math co-processor being used. */
+};
+
+#define ELF_PRARGSZ (80) /* Number of chars for args */
+
+struct elf_prpsinfo
+{
+ char pr_state; /* numeric process state */
+ char pr_sname; /* char for pr_state */
+ char pr_zomb; /* zombie */
+ char pr_nice; /* nice val */
+ unsigned long pr_flag; /* flags */
+ __kernel_uid_t pr_uid;
+ __kernel_gid_t pr_gid;
+ pid_t pr_pid, pr_ppid, pr_pgrp, pr_sid;
+ /* Lots missing */
+ char pr_fname[16]; /* filename of executable */
+ char pr_psargs[ELF_PRARGSZ]; /* initial part of arg list */
+};
+
+#ifndef __KERNEL__
+typedef struct elf_prstatus prstatus_t;
+typedef struct elf_prpsinfo prpsinfo_t;
+#define PRARGSZ ELF_PRARGSZ
+#endif
+
+
+#endif /* _UAPI_LINUX_ELFCORE_H */
diff --git a/include/uapi/linux/errno.h b/include/uapi/linux/errno.h
new file mode 100644
index 0000000..70f2bd3
--- /dev/null
+++ b/include/uapi/linux/errno.h
@@ -0,0 +1 @@
+#include <asm/errno.h>
diff --git a/include/uapi/linux/errqueue.h b/include/uapi/linux/errqueue.h
new file mode 100644
index 0000000..aacd4fb
--- /dev/null
+++ b/include/uapi/linux/errqueue.h
@@ -0,0 +1,26 @@
+#ifndef _UAPI_LINUX_ERRQUEUE_H
+#define _UAPI_LINUX_ERRQUEUE_H
+
+#include <linux/types.h>
+
+struct sock_extended_err {
+ __u32 ee_errno;
+ __u8 ee_origin;
+ __u8 ee_type;
+ __u8 ee_code;
+ __u8 ee_pad;
+ __u32 ee_info;
+ __u32 ee_data;
+};
+
+#define SO_EE_ORIGIN_NONE 0
+#define SO_EE_ORIGIN_LOCAL 1
+#define SO_EE_ORIGIN_ICMP 2
+#define SO_EE_ORIGIN_ICMP6 3
+#define SO_EE_ORIGIN_TXSTATUS 4
+#define SO_EE_ORIGIN_TIMESTAMPING SO_EE_ORIGIN_TXSTATUS
+
+#define SO_EE_OFFENDER(ee) ((struct sockaddr*)((ee)+1))
+
+
+#endif /* _UAPI_LINUX_ERRQUEUE_H */
diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h
new file mode 100644
index 0000000..d3eaaaf
--- /dev/null
+++ b/include/uapi/linux/ethtool.h
@@ -0,0 +1,1085 @@
+/*
+ * ethtool.h: Defines for Linux ethtool.
+ *
+ * Copyright (C) 1998 David S. Miller (davem@redhat.com)
+ * Copyright 2001 Jeff Garzik <jgarzik@pobox.com>
+ * Portions Copyright 2001 Sun Microsystems (thockin@sun.com)
+ * Portions Copyright 2002 Intel (eli.kupermann@intel.com,
+ * christopher.leech@intel.com,
+ * scott.feldman@intel.com)
+ * Portions Copyright (C) Sun Microsystems 2008
+ */
+
+#ifndef _UAPI_LINUX_ETHTOOL_H
+#define _UAPI_LINUX_ETHTOOL_H
+
+#include <linux/types.h>
+#include <linux/if_ether.h>
+
+/* This should work for both 32 and 64 bit userland. */
+struct ethtool_cmd {
+ __u32 cmd;
+ __u32 supported; /* Features this interface supports */
+ __u32 advertising; /* Features this interface advertises */
+ __u16 speed; /* The forced speed (lower bits) in
+ * Mbps. Please use
+ * ethtool_cmd_speed()/_set() to
+ * access it */
+ __u8 duplex; /* Duplex, half or full */
+ __u8 port; /* Which connector port */
+ __u8 phy_address; /* MDIO PHY address (PRTAD for clause 45).
+ * May be read-only or read-write
+ * depending on the driver.
+ */
+ __u8 transceiver; /* Which transceiver to use */
+ __u8 autoneg; /* Enable or disable autonegotiation */
+ __u8 mdio_support; /* MDIO protocols supported. Read-only.
+ * Not set by all drivers.
+ */
+ __u32 maxtxpkt; /* Tx pkts before generating tx int */
+ __u32 maxrxpkt; /* Rx pkts before generating rx int */
+ __u16 speed_hi; /* The forced speed (upper
+ * bits) in Mbps. Please use
+ * ethtool_cmd_speed()/_set() to
+ * access it */
+ __u8 eth_tp_mdix; /* twisted pair MDI-X status */
+ __u8 eth_tp_mdix_ctrl; /* twisted pair MDI-X control, when set,
+ * link should be renegotiated if necessary
+ */
+ __u32 lp_advertising; /* Features the link partner advertises */
+ __u32 reserved[2];
+};
+
+static inline void ethtool_cmd_speed_set(struct ethtool_cmd *ep,
+ __u32 speed)
+{
+
+ ep->speed = (__u16)speed;
+ ep->speed_hi = (__u16)(speed >> 16);
+}
+
+static inline __u32 ethtool_cmd_speed(const struct ethtool_cmd *ep)
+{
+ return (ep->speed_hi << 16) | ep->speed;
+}
+
+/* Device supports clause 22 register access to PHY or peripherals
+ * using the interface defined in <linux/mii.h>. This should not be
+ * set if there are known to be no such peripherals present or if
+ * the driver only emulates clause 22 registers for compatibility.
+ */
+#define ETH_MDIO_SUPPORTS_C22 1
+
+/* Device supports clause 45 register access to PHY or peripherals
+ * using the interface defined in <linux/mii.h> and <linux/mdio.h>.
+ * This should not be set if there are known to be no such peripherals
+ * present.
+ */
+#define ETH_MDIO_SUPPORTS_C45 2
+
+#define ETHTOOL_FWVERS_LEN 32
+#define ETHTOOL_BUSINFO_LEN 32
+/* these strings are set to whatever the driver author decides... */
+struct ethtool_drvinfo {
+ __u32 cmd;
+ char driver[32]; /* driver short name, "tulip", "eepro100" */
+ char version[32]; /* driver version string */
+ char fw_version[ETHTOOL_FWVERS_LEN]; /* firmware version string */
+ char bus_info[ETHTOOL_BUSINFO_LEN]; /* Bus info for this IF. */
+ /* For PCI devices, use pci_name(pci_dev). */
+ char reserved1[32];
+ char reserved2[12];
+ /*
+ * Some struct members below are filled in
+ * using ops->get_sset_count(). Obtaining
+ * this info from ethtool_drvinfo is now
+ * deprecated; Use ETHTOOL_GSSET_INFO
+ * instead.
+ */
+ __u32 n_priv_flags; /* number of flags valid in ETHTOOL_GPFLAGS */
+ __u32 n_stats; /* number of u64's from ETHTOOL_GSTATS */
+ __u32 testinfo_len;
+ __u32 eedump_len; /* Size of data from ETHTOOL_GEEPROM (bytes) */
+ __u32 regdump_len; /* Size of data from ETHTOOL_GREGS (bytes) */
+};
+
+#define SOPASS_MAX 6
+/* wake-on-lan settings */
+struct ethtool_wolinfo {
+ __u32 cmd;
+ __u32 supported;
+ __u32 wolopts;
+ __u8 sopass[SOPASS_MAX]; /* SecureOn(tm) password */
+};
+
+/* for passing single values */
+struct ethtool_value {
+ __u32 cmd;
+ __u32 data;
+};
+
+/* for passing big chunks of data */
+struct ethtool_regs {
+ __u32 cmd;
+ __u32 version; /* driver-specific, indicates different chips/revs */
+ __u32 len; /* bytes */
+ __u8 data[0];
+};
+
+/* for passing EEPROM chunks */
+struct ethtool_eeprom {
+ __u32 cmd;
+ __u32 magic;
+ __u32 offset; /* in bytes */
+ __u32 len; /* in bytes */
+ __u8 data[0];
+};
+
+/**
+ * struct ethtool_eee - Energy Efficient Ethernet information
+ * @cmd: ETHTOOL_{G,S}EEE
+ * @supported: Mask of %SUPPORTED_* flags for the speed/duplex combinations
+ * for which there is EEE support.
+ * @advertised: Mask of %ADVERTISED_* flags for the speed/duplex combinations
+ * advertised as eee capable.
+ * @lp_advertised: Mask of %ADVERTISED_* flags for the speed/duplex
+ * combinations advertised by the link partner as eee capable.
+ * @eee_active: Result of the eee auto negotiation.
+ * @eee_enabled: EEE configured mode (enabled/disabled).
+ * @tx_lpi_enabled: Whether the interface should assert its tx lpi, given
+ * that eee was negotiated.
+ * @tx_lpi_timer: Time in microseconds the interface delays prior to asserting
+ * its tx lpi (after reaching 'idle' state). Effective only when eee
+ * was negotiated and tx_lpi_enabled was set.
+ */
+struct ethtool_eee {
+ __u32 cmd;
+ __u32 supported;
+ __u32 advertised;
+ __u32 lp_advertised;
+ __u32 eee_active;
+ __u32 eee_enabled;
+ __u32 tx_lpi_enabled;
+ __u32 tx_lpi_timer;
+ __u32 reserved[2];
+};
+
+/**
+ * struct ethtool_modinfo - plugin module eeprom information
+ * @cmd: %ETHTOOL_GMODULEINFO
+ * @type: Standard the module information conforms to %ETH_MODULE_SFF_xxxx
+ * @eeprom_len: Length of the eeprom
+ *
+ * This structure is used to return the information to
+ * properly size memory for a subsequent call to %ETHTOOL_GMODULEEEPROM.
+ * The type code indicates the eeprom data format
+ */
+struct ethtool_modinfo {
+ __u32 cmd;
+ __u32 type;
+ __u32 eeprom_len;
+ __u32 reserved[8];
+};
+
+/**
+ * struct ethtool_coalesce - coalescing parameters for IRQs and stats updates
+ * @cmd: ETHTOOL_{G,S}COALESCE
+ * @rx_coalesce_usecs: How many usecs to delay an RX interrupt after
+ * a packet arrives.
+ * @rx_max_coalesced_frames: Maximum number of packets to receive
+ * before an RX interrupt.
+ * @rx_coalesce_usecs_irq: Same as @rx_coalesce_usecs, except that
+ * this value applies while an IRQ is being serviced by the host.
+ * @rx_max_coalesced_frames_irq: Same as @rx_max_coalesced_frames,
+ * except that this value applies while an IRQ is being serviced
+ * by the host.
+ * @tx_coalesce_usecs: How many usecs to delay a TX interrupt after
+ * a packet is sent.
+ * @tx_max_coalesced_frames: Maximum number of packets to be sent
+ * before a TX interrupt.
+ * @tx_coalesce_usecs_irq: Same as @tx_coalesce_usecs, except that
+ * this value applies while an IRQ is being serviced by the host.
+ * @tx_max_coalesced_frames_irq: Same as @tx_max_coalesced_frames,
+ * except that this value applies while an IRQ is being serviced
+ * by the host.
+ * @stats_block_coalesce_usecs: How many usecs to delay in-memory
+ * statistics block updates. Some drivers do not have an
+ * in-memory statistic block, and in such cases this value is
+ * ignored. This value must not be zero.
+ * @use_adaptive_rx_coalesce: Enable adaptive RX coalescing.
+ * @use_adaptive_tx_coalesce: Enable adaptive TX coalescing.
+ * @pkt_rate_low: Threshold for low packet rate (packets per second).
+ * @rx_coalesce_usecs_low: How many usecs to delay an RX interrupt after
+ * a packet arrives, when the packet rate is below @pkt_rate_low.
+ * @rx_max_coalesced_frames_low: Maximum number of packets to be received
+ * before an RX interrupt, when the packet rate is below @pkt_rate_low.
+ * @tx_coalesce_usecs_low: How many usecs to delay a TX interrupt after
+ * a packet is sent, when the packet rate is below @pkt_rate_low.
+ * @tx_max_coalesced_frames_low: Maximum nuumber of packets to be sent before
+ * a TX interrupt, when the packet rate is below @pkt_rate_low.
+ * @pkt_rate_high: Threshold for high packet rate (packets per second).
+ * @rx_coalesce_usecs_high: How many usecs to delay an RX interrupt after
+ * a packet arrives, when the packet rate is above @pkt_rate_high.
+ * @rx_max_coalesced_frames_high: Maximum number of packets to be received
+ * before an RX interrupt, when the packet rate is above @pkt_rate_high.
+ * @tx_coalesce_usecs_high: How many usecs to delay a TX interrupt after
+ * a packet is sent, when the packet rate is above @pkt_rate_high.
+ * @tx_max_coalesced_frames_high: Maximum number of packets to be sent before
+ * a TX interrupt, when the packet rate is above @pkt_rate_high.
+ * @rate_sample_interval: How often to do adaptive coalescing packet rate
+ * sampling, measured in seconds. Must not be zero.
+ *
+ * Each pair of (usecs, max_frames) fields specifies this exit
+ * condition for interrupt coalescing:
+ * (usecs > 0 && time_since_first_completion >= usecs) ||
+ * (max_frames > 0 && completed_frames >= max_frames)
+ * It is illegal to set both usecs and max_frames to zero as this
+ * would cause interrupts to never be generated. To disable
+ * coalescing, set usecs = 0 and max_frames = 1.
+ *
+ * Some implementations ignore the value of max_frames and use the
+ * condition:
+ * time_since_first_completion >= usecs
+ * This is deprecated. Drivers for hardware that does not support
+ * counting completions should validate that max_frames == !rx_usecs.
+ *
+ * Adaptive RX/TX coalescing is an algorithm implemented by some
+ * drivers to improve latency under low packet rates and improve
+ * throughput under high packet rates. Some drivers only implement
+ * one of RX or TX adaptive coalescing. Anything not implemented by
+ * the driver causes these values to be silently ignored.
+ *
+ * When the packet rate is below @pkt_rate_high but above
+ * @pkt_rate_low (both measured in packets per second) the
+ * normal {rx,tx}_* coalescing parameters are used.
+ */
+struct ethtool_coalesce {
+ __u32 cmd;
+ __u32 rx_coalesce_usecs;
+ __u32 rx_max_coalesced_frames;
+ __u32 rx_coalesce_usecs_irq;
+ __u32 rx_max_coalesced_frames_irq;
+ __u32 tx_coalesce_usecs;
+ __u32 tx_max_coalesced_frames;
+ __u32 tx_coalesce_usecs_irq;
+ __u32 tx_max_coalesced_frames_irq;
+ __u32 stats_block_coalesce_usecs;
+ __u32 use_adaptive_rx_coalesce;
+ __u32 use_adaptive_tx_coalesce;
+ __u32 pkt_rate_low;
+ __u32 rx_coalesce_usecs_low;
+ __u32 rx_max_coalesced_frames_low;
+ __u32 tx_coalesce_usecs_low;
+ __u32 tx_max_coalesced_frames_low;
+ __u32 pkt_rate_high;
+ __u32 rx_coalesce_usecs_high;
+ __u32 rx_max_coalesced_frames_high;
+ __u32 tx_coalesce_usecs_high;
+ __u32 tx_max_coalesced_frames_high;
+ __u32 rate_sample_interval;
+};
+
+/* for configuring RX/TX ring parameters */
+struct ethtool_ringparam {
+ __u32 cmd; /* ETHTOOL_{G,S}RINGPARAM */
+
+ /* Read only attributes. These indicate the maximum number
+ * of pending RX/TX ring entries the driver will allow the
+ * user to set.
+ */
+ __u32 rx_max_pending;
+ __u32 rx_mini_max_pending;
+ __u32 rx_jumbo_max_pending;
+ __u32 tx_max_pending;
+
+ /* Values changeable by the user. The valid values are
+ * in the range 1 to the "*_max_pending" counterpart above.
+ */
+ __u32 rx_pending;
+ __u32 rx_mini_pending;
+ __u32 rx_jumbo_pending;
+ __u32 tx_pending;
+};
+
+/**
+ * struct ethtool_channels - configuring number of network channel
+ * @cmd: ETHTOOL_{G,S}CHANNELS
+ * @max_rx: Read only. Maximum number of receive channel the driver support.
+ * @max_tx: Read only. Maximum number of transmit channel the driver support.
+ * @max_other: Read only. Maximum number of other channel the driver support.
+ * @max_combined: Read only. Maximum number of combined channel the driver
+ * support. Set of queues RX, TX or other.
+ * @rx_count: Valid values are in the range 1 to the max_rx.
+ * @tx_count: Valid values are in the range 1 to the max_tx.
+ * @other_count: Valid values are in the range 1 to the max_other.
+ * @combined_count: Valid values are in the range 1 to the max_combined.
+ *
+ * This can be used to configure RX, TX and other channels.
+ */
+
+struct ethtool_channels {
+ __u32 cmd;
+ __u32 max_rx;
+ __u32 max_tx;
+ __u32 max_other;
+ __u32 max_combined;
+ __u32 rx_count;
+ __u32 tx_count;
+ __u32 other_count;
+ __u32 combined_count;
+};
+
+/* for configuring link flow control parameters */
+struct ethtool_pauseparam {
+ __u32 cmd; /* ETHTOOL_{G,S}PAUSEPARAM */
+
+ /* If the link is being auto-negotiated (via ethtool_cmd.autoneg
+ * being true) the user may set 'autoneg' here non-zero to have the
+ * pause parameters be auto-negotiated too. In such a case, the
+ * {rx,tx}_pause values below determine what capabilities are
+ * advertised.
+ *
+ * If 'autoneg' is zero or the link is not being auto-negotiated,
+ * then {rx,tx}_pause force the driver to use/not-use pause
+ * flow control.
+ */
+ __u32 autoneg;
+ __u32 rx_pause;
+ __u32 tx_pause;
+};
+
+#define ETH_GSTRING_LEN 32
+enum ethtool_stringset {
+ ETH_SS_TEST = 0,
+ ETH_SS_STATS,
+ ETH_SS_PRIV_FLAGS,
+ ETH_SS_NTUPLE_FILTERS, /* Do not use, GRXNTUPLE is now deprecated */
+ ETH_SS_FEATURES,
+};
+
+/* for passing string sets for data tagging */
+struct ethtool_gstrings {
+ __u32 cmd; /* ETHTOOL_GSTRINGS */
+ __u32 string_set; /* string set id e.c. ETH_SS_TEST, etc*/
+ __u32 len; /* number of strings in the string set */
+ __u8 data[0];
+};
+
+struct ethtool_sset_info {
+ __u32 cmd; /* ETHTOOL_GSSET_INFO */
+ __u32 reserved;
+ __u64 sset_mask; /* input: each bit selects an sset to query */
+ /* output: each bit a returned sset */
+ __u32 data[0]; /* ETH_SS_xxx count, in order, based on bits
+ in sset_mask. One bit implies one
+ __u32, two bits implies two
+ __u32's, etc. */
+};
+
+/**
+ * enum ethtool_test_flags - flags definition of ethtool_test
+ * @ETH_TEST_FL_OFFLINE: if set perform online and offline tests, otherwise
+ * only online tests.
+ * @ETH_TEST_FL_FAILED: Driver set this flag if test fails.
+ * @ETH_TEST_FL_EXTERNAL_LB: Application request to perform external loopback
+ * test.
+ * @ETH_TEST_FL_EXTERNAL_LB_DONE: Driver performed the external loopback test
+ */
+
+enum ethtool_test_flags {
+ ETH_TEST_FL_OFFLINE = (1 << 0),
+ ETH_TEST_FL_FAILED = (1 << 1),
+ ETH_TEST_FL_EXTERNAL_LB = (1 << 2),
+ ETH_TEST_FL_EXTERNAL_LB_DONE = (1 << 3),
+};
+
+/* for requesting NIC test and getting results*/
+struct ethtool_test {
+ __u32 cmd; /* ETHTOOL_TEST */
+ __u32 flags; /* ETH_TEST_FL_xxx */
+ __u32 reserved;
+ __u32 len; /* result length, in number of u64 elements */
+ __u64 data[0];
+};
+
+/* for dumping NIC-specific statistics */
+struct ethtool_stats {
+ __u32 cmd; /* ETHTOOL_GSTATS */
+ __u32 n_stats; /* number of u64's being returned */
+ __u64 data[0];
+};
+
+struct ethtool_perm_addr {
+ __u32 cmd; /* ETHTOOL_GPERMADDR */
+ __u32 size;
+ __u8 data[0];
+};
+
+/* boolean flags controlling per-interface behavior characteristics.
+ * When reading, the flag indicates whether or not a certain behavior
+ * is enabled/present. When writing, the flag indicates whether
+ * or not the driver should turn on (set) or off (clear) a behavior.
+ *
+ * Some behaviors may read-only (unconditionally absent or present).
+ * If such is the case, return EINVAL in the set-flags operation if the
+ * flag differs from the read-only value.
+ */
+enum ethtool_flags {
+ ETH_FLAG_TXVLAN = (1 << 7), /* TX VLAN offload enabled */
+ ETH_FLAG_RXVLAN = (1 << 8), /* RX VLAN offload enabled */
+ ETH_FLAG_LRO = (1 << 15), /* LRO is enabled */
+ ETH_FLAG_NTUPLE = (1 << 27), /* N-tuple filters enabled */
+ ETH_FLAG_RXHASH = (1 << 28),
+};
+
+/* The following structures are for supporting RX network flow
+ * classification and RX n-tuple configuration. Note, all multibyte
+ * fields, e.g., ip4src, ip4dst, psrc, pdst, spi, etc. are expected to
+ * be in network byte order.
+ */
+
+/**
+ * struct ethtool_tcpip4_spec - flow specification for TCP/IPv4 etc.
+ * @ip4src: Source host
+ * @ip4dst: Destination host
+ * @psrc: Source port
+ * @pdst: Destination port
+ * @tos: Type-of-service
+ *
+ * This can be used to specify a TCP/IPv4, UDP/IPv4 or SCTP/IPv4 flow.
+ */
+struct ethtool_tcpip4_spec {
+ __be32 ip4src;
+ __be32 ip4dst;
+ __be16 psrc;
+ __be16 pdst;
+ __u8 tos;
+};
+
+/**
+ * struct ethtool_ah_espip4_spec - flow specification for IPsec/IPv4
+ * @ip4src: Source host
+ * @ip4dst: Destination host
+ * @spi: Security parameters index
+ * @tos: Type-of-service
+ *
+ * This can be used to specify an IPsec transport or tunnel over IPv4.
+ */
+struct ethtool_ah_espip4_spec {
+ __be32 ip4src;
+ __be32 ip4dst;
+ __be32 spi;
+ __u8 tos;
+};
+
+#define ETH_RX_NFC_IP4 1
+
+/**
+ * struct ethtool_usrip4_spec - general flow specification for IPv4
+ * @ip4src: Source host
+ * @ip4dst: Destination host
+ * @l4_4_bytes: First 4 bytes of transport (layer 4) header
+ * @tos: Type-of-service
+ * @ip_ver: Value must be %ETH_RX_NFC_IP4; mask must be 0
+ * @proto: Transport protocol number; mask must be 0
+ */
+struct ethtool_usrip4_spec {
+ __be32 ip4src;
+ __be32 ip4dst;
+ __be32 l4_4_bytes;
+ __u8 tos;
+ __u8 ip_ver;
+ __u8 proto;
+};
+
+union ethtool_flow_union {
+ struct ethtool_tcpip4_spec tcp_ip4_spec;
+ struct ethtool_tcpip4_spec udp_ip4_spec;
+ struct ethtool_tcpip4_spec sctp_ip4_spec;
+ struct ethtool_ah_espip4_spec ah_ip4_spec;
+ struct ethtool_ah_espip4_spec esp_ip4_spec;
+ struct ethtool_usrip4_spec usr_ip4_spec;
+ struct ethhdr ether_spec;
+ __u8 hdata[60];
+};
+
+struct ethtool_flow_ext {
+ __be16 vlan_etype;
+ __be16 vlan_tci;
+ __be32 data[2];
+};
+
+/**
+ * struct ethtool_rx_flow_spec - classification rule for RX flows
+ * @flow_type: Type of match to perform, e.g. %TCP_V4_FLOW
+ * @h_u: Flow fields to match (dependent on @flow_type)
+ * @h_ext: Additional fields to match
+ * @m_u: Masks for flow field bits to be matched
+ * @m_ext: Masks for additional field bits to be matched
+ * Note, all additional fields must be ignored unless @flow_type
+ * includes the %FLOW_EXT flag.
+ * @ring_cookie: RX ring/queue index to deliver to, or %RX_CLS_FLOW_DISC
+ * if packets should be discarded
+ * @location: Location of rule in the table. Locations must be
+ * numbered such that a flow matching multiple rules will be
+ * classified according to the first (lowest numbered) rule.
+ */
+struct ethtool_rx_flow_spec {
+ __u32 flow_type;
+ union ethtool_flow_union h_u;
+ struct ethtool_flow_ext h_ext;
+ union ethtool_flow_union m_u;
+ struct ethtool_flow_ext m_ext;
+ __u64 ring_cookie;
+ __u32 location;
+};
+
+/**
+ * struct ethtool_rxnfc - command to get or set RX flow classification rules
+ * @cmd: Specific command number - %ETHTOOL_GRXFH, %ETHTOOL_SRXFH,
+ * %ETHTOOL_GRXRINGS, %ETHTOOL_GRXCLSRLCNT, %ETHTOOL_GRXCLSRULE,
+ * %ETHTOOL_GRXCLSRLALL, %ETHTOOL_SRXCLSRLDEL or %ETHTOOL_SRXCLSRLINS
+ * @flow_type: Type of flow to be affected, e.g. %TCP_V4_FLOW
+ * @data: Command-dependent value
+ * @fs: Flow classification rule
+ * @rule_cnt: Number of rules to be affected
+ * @rule_locs: Array of used rule locations
+ *
+ * For %ETHTOOL_GRXFH and %ETHTOOL_SRXFH, @data is a bitmask indicating
+ * the fields included in the flow hash, e.g. %RXH_IP_SRC. The following
+ * structure fields must not be used.
+ *
+ * For %ETHTOOL_GRXRINGS, @data is set to the number of RX rings/queues
+ * on return.
+ *
+ * For %ETHTOOL_GRXCLSRLCNT, @rule_cnt is set to the number of defined
+ * rules on return. If @data is non-zero on return then it is the
+ * size of the rule table, plus the flag %RX_CLS_LOC_SPECIAL if the
+ * driver supports any special location values. If that flag is not
+ * set in @data then special location values should not be used.
+ *
+ * For %ETHTOOL_GRXCLSRULE, @fs.@location specifies the location of an
+ * existing rule on entry and @fs contains the rule on return.
+ *
+ * For %ETHTOOL_GRXCLSRLALL, @rule_cnt specifies the array size of the
+ * user buffer for @rule_locs on entry. On return, @data is the size
+ * of the rule table, @rule_cnt is the number of defined rules, and
+ * @rule_locs contains the locations of the defined rules. Drivers
+ * must use the second parameter to get_rxnfc() instead of @rule_locs.
+ *
+ * For %ETHTOOL_SRXCLSRLINS, @fs specifies the rule to add or update.
+ * @fs.@location either specifies the location to use or is a special
+ * location value with %RX_CLS_LOC_SPECIAL flag set. On return,
+ * @fs.@location is the actual rule location.
+ *
+ * For %ETHTOOL_SRXCLSRLDEL, @fs.@location specifies the location of an
+ * existing rule on entry.
+ *
+ * A driver supporting the special location values for
+ * %ETHTOOL_SRXCLSRLINS may add the rule at any suitable unused
+ * location, and may remove a rule at a later location (lower
+ * priority) that matches exactly the same set of flows. The special
+ * values are: %RX_CLS_LOC_ANY, selecting any location;
+ * %RX_CLS_LOC_FIRST, selecting the first suitable location (maximum
+ * priority); and %RX_CLS_LOC_LAST, selecting the last suitable
+ * location (minimum priority). Additional special values may be
+ * defined in future and drivers must return -%EINVAL for any
+ * unrecognised value.
+ */
+struct ethtool_rxnfc {
+ __u32 cmd;
+ __u32 flow_type;
+ __u64 data;
+ struct ethtool_rx_flow_spec fs;
+ __u32 rule_cnt;
+ __u32 rule_locs[0];
+};
+
+
+/**
+ * struct ethtool_rxfh_indir - command to get or set RX flow hash indirection
+ * @cmd: Specific command number - %ETHTOOL_GRXFHINDIR or %ETHTOOL_SRXFHINDIR
+ * @size: On entry, the array size of the user buffer, which may be zero.
+ * On return from %ETHTOOL_GRXFHINDIR, the array size of the hardware
+ * indirection table.
+ * @ring_index: RX ring/queue index for each hash value
+ *
+ * For %ETHTOOL_GRXFHINDIR, a @size of zero means that only the size
+ * should be returned. For %ETHTOOL_SRXFHINDIR, a @size of zero means
+ * the table should be reset to default values. This last feature
+ * is not supported by the original implementations.
+ */
+struct ethtool_rxfh_indir {
+ __u32 cmd;
+ __u32 size;
+ __u32 ring_index[0];
+};
+
+/**
+ * struct ethtool_rx_ntuple_flow_spec - specification for RX flow filter
+ * @flow_type: Type of match to perform, e.g. %TCP_V4_FLOW
+ * @h_u: Flow field values to match (dependent on @flow_type)
+ * @m_u: Masks for flow field value bits to be ignored
+ * @vlan_tag: VLAN tag to match
+ * @vlan_tag_mask: Mask for VLAN tag bits to be ignored
+ * @data: Driver-dependent data to match
+ * @data_mask: Mask for driver-dependent data bits to be ignored
+ * @action: RX ring/queue index to deliver to (non-negative) or other action
+ * (negative, e.g. %ETHTOOL_RXNTUPLE_ACTION_DROP)
+ *
+ * For flow types %TCP_V4_FLOW, %UDP_V4_FLOW and %SCTP_V4_FLOW, where
+ * a field value and mask are both zero this is treated as if all mask
+ * bits are set i.e. the field is ignored.
+ */
+struct ethtool_rx_ntuple_flow_spec {
+ __u32 flow_type;
+ union {
+ struct ethtool_tcpip4_spec tcp_ip4_spec;
+ struct ethtool_tcpip4_spec udp_ip4_spec;
+ struct ethtool_tcpip4_spec sctp_ip4_spec;
+ struct ethtool_ah_espip4_spec ah_ip4_spec;
+ struct ethtool_ah_espip4_spec esp_ip4_spec;
+ struct ethtool_usrip4_spec usr_ip4_spec;
+ struct ethhdr ether_spec;
+ __u8 hdata[72];
+ } h_u, m_u;
+
+ __u16 vlan_tag;
+ __u16 vlan_tag_mask;
+ __u64 data;
+ __u64 data_mask;
+
+ __s32 action;
+#define ETHTOOL_RXNTUPLE_ACTION_DROP (-1) /* drop packet */
+#define ETHTOOL_RXNTUPLE_ACTION_CLEAR (-2) /* clear filter */
+};
+
+/**
+ * struct ethtool_rx_ntuple - command to set or clear RX flow filter
+ * @cmd: Command number - %ETHTOOL_SRXNTUPLE
+ * @fs: Flow filter specification
+ */
+struct ethtool_rx_ntuple {
+ __u32 cmd;
+ struct ethtool_rx_ntuple_flow_spec fs;
+};
+
+#define ETHTOOL_FLASH_MAX_FILENAME 128
+enum ethtool_flash_op_type {
+ ETHTOOL_FLASH_ALL_REGIONS = 0,
+};
+
+/* for passing firmware flashing related parameters */
+struct ethtool_flash {
+ __u32 cmd;
+ __u32 region;
+ char data[ETHTOOL_FLASH_MAX_FILENAME];
+};
+
+/**
+ * struct ethtool_dump - used for retrieving, setting device dump
+ * @cmd: Command number - %ETHTOOL_GET_DUMP_FLAG, %ETHTOOL_GET_DUMP_DATA, or
+ * %ETHTOOL_SET_DUMP
+ * @version: FW version of the dump, filled in by driver
+ * @flag: driver dependent flag for dump setting, filled in by driver during
+ * get and filled in by ethtool for set operation.
+ * flag must be initialized by macro ETH_FW_DUMP_DISABLE value when
+ * firmware dump is disabled.
+ * @len: length of dump data, used as the length of the user buffer on entry to
+ * %ETHTOOL_GET_DUMP_DATA and this is returned as dump length by driver
+ * for %ETHTOOL_GET_DUMP_FLAG command
+ * @data: data collected for get dump data operation
+ */
+
+#define ETH_FW_DUMP_DISABLE 0
+
+struct ethtool_dump {
+ __u32 cmd;
+ __u32 version;
+ __u32 flag;
+ __u32 len;
+ __u8 data[0];
+};
+
+/* for returning and changing feature sets */
+
+/**
+ * struct ethtool_get_features_block - block with state of 32 features
+ * @available: mask of changeable features
+ * @requested: mask of features requested to be enabled if possible
+ * @active: mask of currently enabled features
+ * @never_changed: mask of features not changeable for any device
+ */
+struct ethtool_get_features_block {
+ __u32 available;
+ __u32 requested;
+ __u32 active;
+ __u32 never_changed;
+};
+
+/**
+ * struct ethtool_gfeatures - command to get state of device's features
+ * @cmd: command number = %ETHTOOL_GFEATURES
+ * @size: in: number of elements in the features[] array;
+ * out: number of elements in features[] needed to hold all features
+ * @features: state of features
+ */
+struct ethtool_gfeatures {
+ __u32 cmd;
+ __u32 size;
+ struct ethtool_get_features_block features[0];
+};
+
+/**
+ * struct ethtool_set_features_block - block with request for 32 features
+ * @valid: mask of features to be changed
+ * @requested: values of features to be changed
+ */
+struct ethtool_set_features_block {
+ __u32 valid;
+ __u32 requested;
+};
+
+/**
+ * struct ethtool_sfeatures - command to request change in device's features
+ * @cmd: command number = %ETHTOOL_SFEATURES
+ * @size: array size of the features[] array
+ * @features: feature change masks
+ */
+struct ethtool_sfeatures {
+ __u32 cmd;
+ __u32 size;
+ struct ethtool_set_features_block features[0];
+};
+
+/**
+ * struct ethtool_ts_info - holds a device's timestamping and PHC association
+ * @cmd: command number = %ETHTOOL_GET_TS_INFO
+ * @so_timestamping: bit mask of the sum of the supported SO_TIMESTAMPING flags
+ * @phc_index: device index of the associated PHC, or -1 if there is none
+ * @tx_types: bit mask of the supported hwtstamp_tx_types enumeration values
+ * @rx_filters: bit mask of the supported hwtstamp_rx_filters enumeration values
+ *
+ * The bits in the 'tx_types' and 'rx_filters' fields correspond to
+ * the 'hwtstamp_tx_types' and 'hwtstamp_rx_filters' enumeration values,
+ * respectively. For example, if the device supports HWTSTAMP_TX_ON,
+ * then (1 << HWTSTAMP_TX_ON) in 'tx_types' will be set.
+ */
+struct ethtool_ts_info {
+ __u32 cmd;
+ __u32 so_timestamping;
+ __s32 phc_index;
+ __u32 tx_types;
+ __u32 tx_reserved[3];
+ __u32 rx_filters;
+ __u32 rx_reserved[3];
+};
+
+/*
+ * %ETHTOOL_SFEATURES changes features present in features[].valid to the
+ * values of corresponding bits in features[].requested. Bits in .requested
+ * not set in .valid or not changeable are ignored.
+ *
+ * Returns %EINVAL when .valid contains undefined or never-changeable bits
+ * or size is not equal to required number of features words (32-bit blocks).
+ * Returns >= 0 if request was completed; bits set in the value mean:
+ * %ETHTOOL_F_UNSUPPORTED - there were bits set in .valid that are not
+ * changeable (not present in %ETHTOOL_GFEATURES' features[].available)
+ * those bits were ignored.
+ * %ETHTOOL_F_WISH - some or all changes requested were recorded but the
+ * resulting state of bits masked by .valid is not equal to .requested.
+ * Probably there are other device-specific constraints on some features
+ * in the set. When %ETHTOOL_F_UNSUPPORTED is set, .valid is considered
+ * here as though ignored bits were cleared.
+ * %ETHTOOL_F_COMPAT - some or all changes requested were made by calling
+ * compatibility functions. Requested offload state cannot be properly
+ * managed by kernel.
+ *
+ * Meaning of bits in the masks are obtained by %ETHTOOL_GSSET_INFO (number of
+ * bits in the arrays - always multiple of 32) and %ETHTOOL_GSTRINGS commands
+ * for ETH_SS_FEATURES string set. First entry in the table corresponds to least
+ * significant bit in features[0] fields. Empty strings mark undefined features.
+ */
+enum ethtool_sfeatures_retval_bits {
+ ETHTOOL_F_UNSUPPORTED__BIT,
+ ETHTOOL_F_WISH__BIT,
+ ETHTOOL_F_COMPAT__BIT,
+};
+
+#define ETHTOOL_F_UNSUPPORTED (1 << ETHTOOL_F_UNSUPPORTED__BIT)
+#define ETHTOOL_F_WISH (1 << ETHTOOL_F_WISH__BIT)
+#define ETHTOOL_F_COMPAT (1 << ETHTOOL_F_COMPAT__BIT)
+
+
+/* CMDs currently supported */
+#define ETHTOOL_GSET 0x00000001 /* Get settings. */
+#define ETHTOOL_SSET 0x00000002 /* Set settings. */
+#define ETHTOOL_GDRVINFO 0x00000003 /* Get driver info. */
+#define ETHTOOL_GREGS 0x00000004 /* Get NIC registers. */
+#define ETHTOOL_GWOL 0x00000005 /* Get wake-on-lan options. */
+#define ETHTOOL_SWOL 0x00000006 /* Set wake-on-lan options. */
+#define ETHTOOL_GMSGLVL 0x00000007 /* Get driver message level */
+#define ETHTOOL_SMSGLVL 0x00000008 /* Set driver msg level. */
+#define ETHTOOL_NWAY_RST 0x00000009 /* Restart autonegotiation. */
+/* Get link status for host, i.e. whether the interface *and* the
+ * physical port (if there is one) are up (ethtool_value). */
+#define ETHTOOL_GLINK 0x0000000a
+#define ETHTOOL_GEEPROM 0x0000000b /* Get EEPROM data */
+#define ETHTOOL_SEEPROM 0x0000000c /* Set EEPROM data. */
+#define ETHTOOL_GCOALESCE 0x0000000e /* Get coalesce config */
+#define ETHTOOL_SCOALESCE 0x0000000f /* Set coalesce config. */
+#define ETHTOOL_GRINGPARAM 0x00000010 /* Get ring parameters */
+#define ETHTOOL_SRINGPARAM 0x00000011 /* Set ring parameters. */
+#define ETHTOOL_GPAUSEPARAM 0x00000012 /* Get pause parameters */
+#define ETHTOOL_SPAUSEPARAM 0x00000013 /* Set pause parameters. */
+#define ETHTOOL_GRXCSUM 0x00000014 /* Get RX hw csum enable (ethtool_value) */
+#define ETHTOOL_SRXCSUM 0x00000015 /* Set RX hw csum enable (ethtool_value) */
+#define ETHTOOL_GTXCSUM 0x00000016 /* Get TX hw csum enable (ethtool_value) */
+#define ETHTOOL_STXCSUM 0x00000017 /* Set TX hw csum enable (ethtool_value) */
+#define ETHTOOL_GSG 0x00000018 /* Get scatter-gather enable
+ * (ethtool_value) */
+#define ETHTOOL_SSG 0x00000019 /* Set scatter-gather enable
+ * (ethtool_value). */
+#define ETHTOOL_TEST 0x0000001a /* execute NIC self-test. */
+#define ETHTOOL_GSTRINGS 0x0000001b /* get specified string set */
+#define ETHTOOL_PHYS_ID 0x0000001c /* identify the NIC */
+#define ETHTOOL_GSTATS 0x0000001d /* get NIC-specific statistics */
+#define ETHTOOL_GTSO 0x0000001e /* Get TSO enable (ethtool_value) */
+#define ETHTOOL_STSO 0x0000001f /* Set TSO enable (ethtool_value) */
+#define ETHTOOL_GPERMADDR 0x00000020 /* Get permanent hardware address */
+#define ETHTOOL_GUFO 0x00000021 /* Get UFO enable (ethtool_value) */
+#define ETHTOOL_SUFO 0x00000022 /* Set UFO enable (ethtool_value) */
+#define ETHTOOL_GGSO 0x00000023 /* Get GSO enable (ethtool_value) */
+#define ETHTOOL_SGSO 0x00000024 /* Set GSO enable (ethtool_value) */
+#define ETHTOOL_GFLAGS 0x00000025 /* Get flags bitmap(ethtool_value) */
+#define ETHTOOL_SFLAGS 0x00000026 /* Set flags bitmap(ethtool_value) */
+#define ETHTOOL_GPFLAGS 0x00000027 /* Get driver-private flags bitmap */
+#define ETHTOOL_SPFLAGS 0x00000028 /* Set driver-private flags bitmap */
+
+#define ETHTOOL_GRXFH 0x00000029 /* Get RX flow hash configuration */
+#define ETHTOOL_SRXFH 0x0000002a /* Set RX flow hash configuration */
+#define ETHTOOL_GGRO 0x0000002b /* Get GRO enable (ethtool_value) */
+#define ETHTOOL_SGRO 0x0000002c /* Set GRO enable (ethtool_value) */
+#define ETHTOOL_GRXRINGS 0x0000002d /* Get RX rings available for LB */
+#define ETHTOOL_GRXCLSRLCNT 0x0000002e /* Get RX class rule count */
+#define ETHTOOL_GRXCLSRULE 0x0000002f /* Get RX classification rule */
+#define ETHTOOL_GRXCLSRLALL 0x00000030 /* Get all RX classification rule */
+#define ETHTOOL_SRXCLSRLDEL 0x00000031 /* Delete RX classification rule */
+#define ETHTOOL_SRXCLSRLINS 0x00000032 /* Insert RX classification rule */
+#define ETHTOOL_FLASHDEV 0x00000033 /* Flash firmware to device */
+#define ETHTOOL_RESET 0x00000034 /* Reset hardware */
+#define ETHTOOL_SRXNTUPLE 0x00000035 /* Add an n-tuple filter to device */
+#define ETHTOOL_GRXNTUPLE 0x00000036 /* deprecated */
+#define ETHTOOL_GSSET_INFO 0x00000037 /* Get string set info */
+#define ETHTOOL_GRXFHINDIR 0x00000038 /* Get RX flow hash indir'n table */
+#define ETHTOOL_SRXFHINDIR 0x00000039 /* Set RX flow hash indir'n table */
+
+#define ETHTOOL_GFEATURES 0x0000003a /* Get device offload settings */
+#define ETHTOOL_SFEATURES 0x0000003b /* Change device offload settings */
+#define ETHTOOL_GCHANNELS 0x0000003c /* Get no of channels */
+#define ETHTOOL_SCHANNELS 0x0000003d /* Set no of channels */
+#define ETHTOOL_SET_DUMP 0x0000003e /* Set dump settings */
+#define ETHTOOL_GET_DUMP_FLAG 0x0000003f /* Get dump settings */
+#define ETHTOOL_GET_DUMP_DATA 0x00000040 /* Get dump data */
+#define ETHTOOL_GET_TS_INFO 0x00000041 /* Get time stamping and PHC info */
+#define ETHTOOL_GMODULEINFO 0x00000042 /* Get plug-in module information */
+#define ETHTOOL_GMODULEEEPROM 0x00000043 /* Get plug-in module eeprom */
+#define ETHTOOL_GEEE 0x00000044 /* Get EEE settings */
+#define ETHTOOL_SEEE 0x00000045 /* Set EEE settings */
+
+/* compatibility with older code */
+#define SPARC_ETH_GSET ETHTOOL_GSET
+#define SPARC_ETH_SSET ETHTOOL_SSET
+
+/* Indicates what features are supported by the interface. */
+#define SUPPORTED_10baseT_Half (1 << 0)
+#define SUPPORTED_10baseT_Full (1 << 1)
+#define SUPPORTED_100baseT_Half (1 << 2)
+#define SUPPORTED_100baseT_Full (1 << 3)
+#define SUPPORTED_1000baseT_Half (1 << 4)
+#define SUPPORTED_1000baseT_Full (1 << 5)
+#define SUPPORTED_Autoneg (1 << 6)
+#define SUPPORTED_TP (1 << 7)
+#define SUPPORTED_AUI (1 << 8)
+#define SUPPORTED_MII (1 << 9)
+#define SUPPORTED_FIBRE (1 << 10)
+#define SUPPORTED_BNC (1 << 11)
+#define SUPPORTED_10000baseT_Full (1 << 12)
+#define SUPPORTED_Pause (1 << 13)
+#define SUPPORTED_Asym_Pause (1 << 14)
+#define SUPPORTED_2500baseX_Full (1 << 15)
+#define SUPPORTED_Backplane (1 << 16)
+#define SUPPORTED_1000baseKX_Full (1 << 17)
+#define SUPPORTED_10000baseKX4_Full (1 << 18)
+#define SUPPORTED_10000baseKR_Full (1 << 19)
+#define SUPPORTED_10000baseR_FEC (1 << 20)
+#define SUPPORTED_20000baseMLD2_Full (1 << 21)
+#define SUPPORTED_20000baseKR2_Full (1 << 22)
+#define SUPPORTED_40000baseKR4_Full (1 << 23)
+#define SUPPORTED_40000baseCR4_Full (1 << 24)
+#define SUPPORTED_40000baseSR4_Full (1 << 25)
+#define SUPPORTED_40000baseLR4_Full (1 << 26)
+
+/* Indicates what features are advertised by the interface. */
+#define ADVERTISED_10baseT_Half (1 << 0)
+#define ADVERTISED_10baseT_Full (1 << 1)
+#define ADVERTISED_100baseT_Half (1 << 2)
+#define ADVERTISED_100baseT_Full (1 << 3)
+#define ADVERTISED_1000baseT_Half (1 << 4)
+#define ADVERTISED_1000baseT_Full (1 << 5)
+#define ADVERTISED_Autoneg (1 << 6)
+#define ADVERTISED_TP (1 << 7)
+#define ADVERTISED_AUI (1 << 8)
+#define ADVERTISED_MII (1 << 9)
+#define ADVERTISED_FIBRE (1 << 10)
+#define ADVERTISED_BNC (1 << 11)
+#define ADVERTISED_10000baseT_Full (1 << 12)
+#define ADVERTISED_Pause (1 << 13)
+#define ADVERTISED_Asym_Pause (1 << 14)
+#define ADVERTISED_2500baseX_Full (1 << 15)
+#define ADVERTISED_Backplane (1 << 16)
+#define ADVERTISED_1000baseKX_Full (1 << 17)
+#define ADVERTISED_10000baseKX4_Full (1 << 18)
+#define ADVERTISED_10000baseKR_Full (1 << 19)
+#define ADVERTISED_10000baseR_FEC (1 << 20)
+#define ADVERTISED_20000baseMLD2_Full (1 << 21)
+#define ADVERTISED_20000baseKR2_Full (1 << 22)
+#define ADVERTISED_40000baseKR4_Full (1 << 23)
+#define ADVERTISED_40000baseCR4_Full (1 << 24)
+#define ADVERTISED_40000baseSR4_Full (1 << 25)
+#define ADVERTISED_40000baseLR4_Full (1 << 26)
+
+/* The following are all involved in forcing a particular link
+ * mode for the device for setting things. When getting the
+ * devices settings, these indicate the current mode and whether
+ * it was forced up into this mode or autonegotiated.
+ */
+
+/* The forced speed, 10Mb, 100Mb, gigabit, 2.5Gb, 10GbE. */
+#define SPEED_10 10
+#define SPEED_100 100
+#define SPEED_1000 1000
+#define SPEED_2500 2500
+#define SPEED_10000 10000
+#define SPEED_UNKNOWN -1
+
+/* Duplex, half or full. */
+#define DUPLEX_HALF 0x00
+#define DUPLEX_FULL 0x01
+#define DUPLEX_UNKNOWN 0xff
+
+/* Which connector port. */
+#define PORT_TP 0x00
+#define PORT_AUI 0x01
+#define PORT_MII 0x02
+#define PORT_FIBRE 0x03
+#define PORT_BNC 0x04
+#define PORT_DA 0x05
+#define PORT_NONE 0xef
+#define PORT_OTHER 0xff
+
+/* Which transceiver to use. */
+#define XCVR_INTERNAL 0x00
+#define XCVR_EXTERNAL 0x01
+#define XCVR_DUMMY1 0x02
+#define XCVR_DUMMY2 0x03
+#define XCVR_DUMMY3 0x04
+
+/* Enable or disable autonegotiation. If this is set to enable,
+ * the forced link modes above are completely ignored.
+ */
+#define AUTONEG_DISABLE 0x00
+#define AUTONEG_ENABLE 0x01
+
+/* MDI or MDI-X status/control - if MDI/MDI_X/AUTO is set then
+ * the driver is required to renegotiate link
+ */
+#define ETH_TP_MDI_INVALID 0x00 /* status: unknown; control: unsupported */
+#define ETH_TP_MDI 0x01 /* status: MDI; control: force MDI */
+#define ETH_TP_MDI_X 0x02 /* status: MDI-X; control: force MDI-X */
+#define ETH_TP_MDI_AUTO 0x03 /* control: auto-select */
+
+/* Wake-On-Lan options. */
+#define WAKE_PHY (1 << 0)
+#define WAKE_UCAST (1 << 1)
+#define WAKE_MCAST (1 << 2)
+#define WAKE_BCAST (1 << 3)
+#define WAKE_ARP (1 << 4)
+#define WAKE_MAGIC (1 << 5)
+#define WAKE_MAGICSECURE (1 << 6) /* only meaningful if WAKE_MAGIC */
+
+/* L2-L4 network traffic flow types */
+#define TCP_V4_FLOW 0x01 /* hash or spec (tcp_ip4_spec) */
+#define UDP_V4_FLOW 0x02 /* hash or spec (udp_ip4_spec) */
+#define SCTP_V4_FLOW 0x03 /* hash or spec (sctp_ip4_spec) */
+#define AH_ESP_V4_FLOW 0x04 /* hash only */
+#define TCP_V6_FLOW 0x05 /* hash only */
+#define UDP_V6_FLOW 0x06 /* hash only */
+#define SCTP_V6_FLOW 0x07 /* hash only */
+#define AH_ESP_V6_FLOW 0x08 /* hash only */
+#define AH_V4_FLOW 0x09 /* hash or spec (ah_ip4_spec) */
+#define ESP_V4_FLOW 0x0a /* hash or spec (esp_ip4_spec) */
+#define AH_V6_FLOW 0x0b /* hash only */
+#define ESP_V6_FLOW 0x0c /* hash only */
+#define IP_USER_FLOW 0x0d /* spec only (usr_ip4_spec) */
+#define IPV4_FLOW 0x10 /* hash only */
+#define IPV6_FLOW 0x11 /* hash only */
+#define ETHER_FLOW 0x12 /* spec only (ether_spec) */
+/* Flag to enable additional fields in struct ethtool_rx_flow_spec */
+#define FLOW_EXT 0x80000000
+
+/* L3-L4 network traffic flow hash options */
+#define RXH_L2DA (1 << 1)
+#define RXH_VLAN (1 << 2)
+#define RXH_L3_PROTO (1 << 3)
+#define RXH_IP_SRC (1 << 4)
+#define RXH_IP_DST (1 << 5)
+#define RXH_L4_B_0_1 (1 << 6) /* src port in case of TCP/UDP/SCTP */
+#define RXH_L4_B_2_3 (1 << 7) /* dst port in case of TCP/UDP/SCTP */
+#define RXH_DISCARD (1 << 31)
+
+#define RX_CLS_FLOW_DISC 0xffffffffffffffffULL
+
+/* Special RX classification rule insert location values */
+#define RX_CLS_LOC_SPECIAL 0x80000000 /* flag */
+#define RX_CLS_LOC_ANY 0xffffffff
+#define RX_CLS_LOC_FIRST 0xfffffffe
+#define RX_CLS_LOC_LAST 0xfffffffd
+
+/* EEPROM Standards for plug in modules */
+#define ETH_MODULE_SFF_8079 0x1
+#define ETH_MODULE_SFF_8079_LEN 256
+#define ETH_MODULE_SFF_8472 0x2
+#define ETH_MODULE_SFF_8472_LEN 512
+
+/* Reset flags */
+/* The reset() operation must clear the flags for the components which
+ * were actually reset. On successful return, the flags indicate the
+ * components which were not reset, either because they do not exist
+ * in the hardware or because they cannot be reset independently. The
+ * driver must never reset any components that were not requested.
+ */
+enum ethtool_reset_flags {
+ /* These flags represent components dedicated to the interface
+ * the command is addressed to. Shift any flag left by
+ * ETH_RESET_SHARED_SHIFT to reset a shared component of the
+ * same type.
+ */
+ ETH_RESET_MGMT = 1 << 0, /* Management processor */
+ ETH_RESET_IRQ = 1 << 1, /* Interrupt requester */
+ ETH_RESET_DMA = 1 << 2, /* DMA engine */
+ ETH_RESET_FILTER = 1 << 3, /* Filtering/flow direction */
+ ETH_RESET_OFFLOAD = 1 << 4, /* Protocol offload */
+ ETH_RESET_MAC = 1 << 5, /* Media access controller */
+ ETH_RESET_PHY = 1 << 6, /* Transceiver/PHY */
+ ETH_RESET_RAM = 1 << 7, /* RAM shared between
+ * multiple components */
+
+ ETH_RESET_DEDICATED = 0x0000ffff, /* All components dedicated to
+ * this interface */
+ ETH_RESET_ALL = 0xffffffff, /* All components used by this
+ * interface, even if shared */
+};
+#define ETH_RESET_SHARED_SHIFT 16
+
+#endif /* _UAPI_LINUX_ETHTOOL_H */
diff --git a/include/uapi/linux/eventpoll.h b/include/uapi/linux/eventpoll.h
new file mode 100644
index 0000000..8c99ce7
--- /dev/null
+++ b/include/uapi/linux/eventpoll.h
@@ -0,0 +1,66 @@
+/*
+ * include/linux/eventpoll.h ( Efficient event polling implementation )
+ * Copyright (C) 2001,...,2006 Davide Libenzi
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Davide Libenzi <davidel@xmailserver.org>
+ *
+ */
+
+#ifndef _UAPI_LINUX_EVENTPOLL_H
+#define _UAPI_LINUX_EVENTPOLL_H
+
+/* For O_CLOEXEC */
+#include <linux/fcntl.h>
+#include <linux/types.h>
+
+/* Flags for epoll_create1. */
+#define EPOLL_CLOEXEC O_CLOEXEC
+
+/* Valid opcodes to issue to sys_epoll_ctl() */
+#define EPOLL_CTL_ADD 1
+#define EPOLL_CTL_DEL 2
+#define EPOLL_CTL_MOD 3
+#define EPOLL_CTL_DISABLE 4
+
+/*
+ * Request the handling of system wakeup events so as to prevent system suspends
+ * from happening while those events are being processed.
+ *
+ * Assuming neither EPOLLET nor EPOLLONESHOT is set, system suspends will not be
+ * re-allowed until epoll_wait is called again after consuming the wakeup
+ * event(s).
+ *
+ * Requires CAP_BLOCK_SUSPEND
+ */
+#define EPOLLWAKEUP (1 << 29)
+
+/* Set the One Shot behaviour for the target file descriptor */
+#define EPOLLONESHOT (1 << 30)
+
+/* Set the Edge Triggered behaviour for the target file descriptor */
+#define EPOLLET (1 << 31)
+
+/*
+ * On x86-64 make the 64bit structure have the same alignment as the
+ * 32bit structure. This makes 32bit emulation easier.
+ *
+ * UML/x86_64 needs the same packing as x86_64
+ */
+#ifdef __x86_64__
+#define EPOLL_PACKED __attribute__((packed))
+#else
+#define EPOLL_PACKED
+#endif
+
+struct epoll_event {
+ __u32 events;
+ __u64 data;
+} EPOLL_PACKED;
+
+
+#endif /* _UAPI_LINUX_EVENTPOLL_H */
diff --git a/include/linux/fadvise.h b/include/uapi/linux/fadvise.h
similarity index 100%
rename from include/linux/fadvise.h
rename to include/uapi/linux/fadvise.h
diff --git a/include/uapi/linux/falloc.h b/include/uapi/linux/falloc.h
new file mode 100644
index 0000000..990c4cc
--- /dev/null
+++ b/include/uapi/linux/falloc.h
@@ -0,0 +1,9 @@
+#ifndef _UAPI_FALLOC_H_
+#define _UAPI_FALLOC_H_
+
+#define FALLOC_FL_KEEP_SIZE 0x01 /* default is extend size */
+#define FALLOC_FL_PUNCH_HOLE 0x02 /* de-allocates range */
+#define FALLOC_FL_NO_HIDE_STALE 0x04 /* reserved codepoint */
+
+
+#endif /* _UAPI_FALLOC_H_ */
diff --git a/include/uapi/linux/fanotify.h b/include/uapi/linux/fanotify.h
new file mode 100644
index 0000000..030508d
--- /dev/null
+++ b/include/uapi/linux/fanotify.h
@@ -0,0 +1,116 @@
+#ifndef _UAPI_LINUX_FANOTIFY_H
+#define _UAPI_LINUX_FANOTIFY_H
+
+#include <linux/types.h>
+
+/* the following events that user-space can register for */
+#define FAN_ACCESS 0x00000001 /* File was accessed */
+#define FAN_MODIFY 0x00000002 /* File was modified */
+#define FAN_CLOSE_WRITE 0x00000008 /* Writtable file closed */
+#define FAN_CLOSE_NOWRITE 0x00000010 /* Unwrittable file closed */
+#define FAN_OPEN 0x00000020 /* File was opened */
+
+#define FAN_Q_OVERFLOW 0x00004000 /* Event queued overflowed */
+
+#define FAN_OPEN_PERM 0x00010000 /* File open in perm check */
+#define FAN_ACCESS_PERM 0x00020000 /* File accessed in perm check */
+
+#define FAN_ONDIR 0x40000000 /* event occurred against dir */
+
+#define FAN_EVENT_ON_CHILD 0x08000000 /* interested in child events */
+
+/* helper events */
+#define FAN_CLOSE (FAN_CLOSE_WRITE | FAN_CLOSE_NOWRITE) /* close */
+
+/* flags used for fanotify_init() */
+#define FAN_CLOEXEC 0x00000001
+#define FAN_NONBLOCK 0x00000002
+
+/* These are NOT bitwise flags. Both bits are used togther. */
+#define FAN_CLASS_NOTIF 0x00000000
+#define FAN_CLASS_CONTENT 0x00000004
+#define FAN_CLASS_PRE_CONTENT 0x00000008
+#define FAN_ALL_CLASS_BITS (FAN_CLASS_NOTIF | FAN_CLASS_CONTENT | \
+ FAN_CLASS_PRE_CONTENT)
+
+#define FAN_UNLIMITED_QUEUE 0x00000010
+#define FAN_UNLIMITED_MARKS 0x00000020
+
+#define FAN_ALL_INIT_FLAGS (FAN_CLOEXEC | FAN_NONBLOCK | \
+ FAN_ALL_CLASS_BITS | FAN_UNLIMITED_QUEUE |\
+ FAN_UNLIMITED_MARKS)
+
+/* flags used for fanotify_modify_mark() */
+#define FAN_MARK_ADD 0x00000001
+#define FAN_MARK_REMOVE 0x00000002
+#define FAN_MARK_DONT_FOLLOW 0x00000004
+#define FAN_MARK_ONLYDIR 0x00000008
+#define FAN_MARK_MOUNT 0x00000010
+#define FAN_MARK_IGNORED_MASK 0x00000020
+#define FAN_MARK_IGNORED_SURV_MODIFY 0x00000040
+#define FAN_MARK_FLUSH 0x00000080
+
+#define FAN_ALL_MARK_FLAGS (FAN_MARK_ADD |\
+ FAN_MARK_REMOVE |\
+ FAN_MARK_DONT_FOLLOW |\
+ FAN_MARK_ONLYDIR |\
+ FAN_MARK_MOUNT |\
+ FAN_MARK_IGNORED_MASK |\
+ FAN_MARK_IGNORED_SURV_MODIFY |\
+ FAN_MARK_FLUSH)
+
+/*
+ * All of the events - we build the list by hand so that we can add flags in
+ * the future and not break backward compatibility. Apps will get only the
+ * events that they originally wanted. Be sure to add new events here!
+ */
+#define FAN_ALL_EVENTS (FAN_ACCESS |\
+ FAN_MODIFY |\
+ FAN_CLOSE |\
+ FAN_OPEN)
+
+/*
+ * All events which require a permission response from userspace
+ */
+#define FAN_ALL_PERM_EVENTS (FAN_OPEN_PERM |\
+ FAN_ACCESS_PERM)
+
+#define FAN_ALL_OUTGOING_EVENTS (FAN_ALL_EVENTS |\
+ FAN_ALL_PERM_EVENTS |\
+ FAN_Q_OVERFLOW)
+
+#define FANOTIFY_METADATA_VERSION 3
+
+struct fanotify_event_metadata {
+ __u32 event_len;
+ __u8 vers;
+ __u8 reserved;
+ __u16 metadata_len;
+ __aligned_u64 mask;
+ __s32 fd;
+ __s32 pid;
+};
+
+struct fanotify_response {
+ __s32 fd;
+ __u32 response;
+};
+
+/* Legit userspace responses to a _PERM event */
+#define FAN_ALLOW 0x01
+#define FAN_DENY 0x02
+/* No fd set in event */
+#define FAN_NOFD -1
+
+/* Helper functions to deal with fanotify_event_metadata buffers */
+#define FAN_EVENT_METADATA_LEN (sizeof(struct fanotify_event_metadata))
+
+#define FAN_EVENT_NEXT(meta, len) ((len) -= (meta)->event_len, \
+ (struct fanotify_event_metadata*)(((char *)(meta)) + \
+ (meta)->event_len))
+
+#define FAN_EVENT_OK(meta, len) ((long)(len) >= (long)FAN_EVENT_METADATA_LEN && \
+ (long)(meta)->event_len >= (long)FAN_EVENT_METADATA_LEN && \
+ (long)(meta)->event_len <= (long)(len))
+
+#endif /* _UAPI_LINUX_FANOTIFY_H */
diff --git a/include/uapi/linux/fb.h b/include/uapi/linux/fb.h
new file mode 100644
index 0000000..fb795c3
--- /dev/null
+++ b/include/uapi/linux/fb.h
@@ -0,0 +1,402 @@
+#ifndef _UAPI_LINUX_FB_H
+#define _UAPI_LINUX_FB_H
+
+#include <linux/types.h>
+#include <linux/i2c.h>
+
+/* Definitions of frame buffers */
+
+#define FB_MAX 32 /* sufficient for now */
+
+/* ioctls
+ 0x46 is 'F' */
+#define FBIOGET_VSCREENINFO 0x4600
+#define FBIOPUT_VSCREENINFO 0x4601
+#define FBIOGET_FSCREENINFO 0x4602
+#define FBIOGETCMAP 0x4604
+#define FBIOPUTCMAP 0x4605
+#define FBIOPAN_DISPLAY 0x4606
+#ifndef __KERNEL__
+#define FBIO_CURSOR _IOWR('F', 0x08, struct fb_cursor)
+#endif
+/* 0x4607-0x460B are defined below */
+/* #define FBIOGET_MONITORSPEC 0x460C */
+/* #define FBIOPUT_MONITORSPEC 0x460D */
+/* #define FBIOSWITCH_MONIBIT 0x460E */
+#define FBIOGET_CON2FBMAP 0x460F
+#define FBIOPUT_CON2FBMAP 0x4610
+#define FBIOBLANK 0x4611 /* arg: 0 or vesa level + 1 */
+#define FBIOGET_VBLANK _IOR('F', 0x12, struct fb_vblank)
+#define FBIO_ALLOC 0x4613
+#define FBIO_FREE 0x4614
+#define FBIOGET_GLYPH 0x4615
+#define FBIOGET_HWCINFO 0x4616
+#define FBIOPUT_MODEINFO 0x4617
+#define FBIOGET_DISPINFO 0x4618
+#define FBIO_WAITFORVSYNC _IOW('F', 0x20, __u32)
+
+#define FB_TYPE_PACKED_PIXELS 0 /* Packed Pixels */
+#define FB_TYPE_PLANES 1 /* Non interleaved planes */
+#define FB_TYPE_INTERLEAVED_PLANES 2 /* Interleaved planes */
+#define FB_TYPE_TEXT 3 /* Text/attributes */
+#define FB_TYPE_VGA_PLANES 4 /* EGA/VGA planes */
+#define FB_TYPE_FOURCC 5 /* Type identified by a V4L2 FOURCC */
+
+#define FB_AUX_TEXT_MDA 0 /* Monochrome text */
+#define FB_AUX_TEXT_CGA 1 /* CGA/EGA/VGA Color text */
+#define FB_AUX_TEXT_S3_MMIO 2 /* S3 MMIO fasttext */
+#define FB_AUX_TEXT_MGA_STEP16 3 /* MGA Millenium I: text, attr, 14 reserved bytes */
+#define FB_AUX_TEXT_MGA_STEP8 4 /* other MGAs: text, attr, 6 reserved bytes */
+#define FB_AUX_TEXT_SVGA_GROUP 8 /* 8-15: SVGA tileblit compatible modes */
+#define FB_AUX_TEXT_SVGA_MASK 7 /* lower three bits says step */
+#define FB_AUX_TEXT_SVGA_STEP2 8 /* SVGA text mode: text, attr */
+#define FB_AUX_TEXT_SVGA_STEP4 9 /* SVGA text mode: text, attr, 2 reserved bytes */
+#define FB_AUX_TEXT_SVGA_STEP8 10 /* SVGA text mode: text, attr, 6 reserved bytes */
+#define FB_AUX_TEXT_SVGA_STEP16 11 /* SVGA text mode: text, attr, 14 reserved bytes */
+#define FB_AUX_TEXT_SVGA_LAST 15 /* reserved up to 15 */
+
+#define FB_AUX_VGA_PLANES_VGA4 0 /* 16 color planes (EGA/VGA) */
+#define FB_AUX_VGA_PLANES_CFB4 1 /* CFB4 in planes (VGA) */
+#define FB_AUX_VGA_PLANES_CFB8 2 /* CFB8 in planes (VGA) */
+
+#define FB_VISUAL_MONO01 0 /* Monochr. 1=Black 0=White */
+#define FB_VISUAL_MONO10 1 /* Monochr. 1=White 0=Black */
+#define FB_VISUAL_TRUECOLOR 2 /* True color */
+#define FB_VISUAL_PSEUDOCOLOR 3 /* Pseudo color (like atari) */
+#define FB_VISUAL_DIRECTCOLOR 4 /* Direct color */
+#define FB_VISUAL_STATIC_PSEUDOCOLOR 5 /* Pseudo color readonly */
+#define FB_VISUAL_FOURCC 6 /* Visual identified by a V4L2 FOURCC */
+
+#define FB_ACCEL_NONE 0 /* no hardware accelerator */
+#define FB_ACCEL_ATARIBLITT 1 /* Atari Blitter */
+#define FB_ACCEL_AMIGABLITT 2 /* Amiga Blitter */
+#define FB_ACCEL_S3_TRIO64 3 /* Cybervision64 (S3 Trio64) */
+#define FB_ACCEL_NCR_77C32BLT 4 /* RetinaZ3 (NCR 77C32BLT) */
+#define FB_ACCEL_S3_VIRGE 5 /* Cybervision64/3D (S3 ViRGE) */
+#define FB_ACCEL_ATI_MACH64GX 6 /* ATI Mach 64GX family */
+#define FB_ACCEL_DEC_TGA 7 /* DEC 21030 TGA */
+#define FB_ACCEL_ATI_MACH64CT 8 /* ATI Mach 64CT family */
+#define FB_ACCEL_ATI_MACH64VT 9 /* ATI Mach 64CT family VT class */
+#define FB_ACCEL_ATI_MACH64GT 10 /* ATI Mach 64CT family GT class */
+#define FB_ACCEL_SUN_CREATOR 11 /* Sun Creator/Creator3D */
+#define FB_ACCEL_SUN_CGSIX 12 /* Sun cg6 */
+#define FB_ACCEL_SUN_LEO 13 /* Sun leo/zx */
+#define FB_ACCEL_IMS_TWINTURBO 14 /* IMS Twin Turbo */
+#define FB_ACCEL_3DLABS_PERMEDIA2 15 /* 3Dlabs Permedia 2 */
+#define FB_ACCEL_MATROX_MGA2064W 16 /* Matrox MGA2064W (Millenium) */
+#define FB_ACCEL_MATROX_MGA1064SG 17 /* Matrox MGA1064SG (Mystique) */
+#define FB_ACCEL_MATROX_MGA2164W 18 /* Matrox MGA2164W (Millenium II) */
+#define FB_ACCEL_MATROX_MGA2164W_AGP 19 /* Matrox MGA2164W (Millenium II) */
+#define FB_ACCEL_MATROX_MGAG100 20 /* Matrox G100 (Productiva G100) */
+#define FB_ACCEL_MATROX_MGAG200 21 /* Matrox G200 (Myst, Mill, ...) */
+#define FB_ACCEL_SUN_CG14 22 /* Sun cgfourteen */
+#define FB_ACCEL_SUN_BWTWO 23 /* Sun bwtwo */
+#define FB_ACCEL_SUN_CGTHREE 24 /* Sun cgthree */
+#define FB_ACCEL_SUN_TCX 25 /* Sun tcx */
+#define FB_ACCEL_MATROX_MGAG400 26 /* Matrox G400 */
+#define FB_ACCEL_NV3 27 /* nVidia RIVA 128 */
+#define FB_ACCEL_NV4 28 /* nVidia RIVA TNT */
+#define FB_ACCEL_NV5 29 /* nVidia RIVA TNT2 */
+#define FB_ACCEL_CT_6555x 30 /* C&T 6555x */
+#define FB_ACCEL_3DFX_BANSHEE 31 /* 3Dfx Banshee */
+#define FB_ACCEL_ATI_RAGE128 32 /* ATI Rage128 family */
+#define FB_ACCEL_IGS_CYBER2000 33 /* CyberPro 2000 */
+#define FB_ACCEL_IGS_CYBER2010 34 /* CyberPro 2010 */
+#define FB_ACCEL_IGS_CYBER5000 35 /* CyberPro 5000 */
+#define FB_ACCEL_SIS_GLAMOUR 36 /* SiS 300/630/540 */
+#define FB_ACCEL_3DLABS_PERMEDIA3 37 /* 3Dlabs Permedia 3 */
+#define FB_ACCEL_ATI_RADEON 38 /* ATI Radeon family */
+#define FB_ACCEL_I810 39 /* Intel 810/815 */
+#define FB_ACCEL_SIS_GLAMOUR_2 40 /* SiS 315, 650, 740 */
+#define FB_ACCEL_SIS_XABRE 41 /* SiS 330 ("Xabre") */
+#define FB_ACCEL_I830 42 /* Intel 830M/845G/85x/865G */
+#define FB_ACCEL_NV_10 43 /* nVidia Arch 10 */
+#define FB_ACCEL_NV_20 44 /* nVidia Arch 20 */
+#define FB_ACCEL_NV_30 45 /* nVidia Arch 30 */
+#define FB_ACCEL_NV_40 46 /* nVidia Arch 40 */
+#define FB_ACCEL_XGI_VOLARI_V 47 /* XGI Volari V3XT, V5, V8 */
+#define FB_ACCEL_XGI_VOLARI_Z 48 /* XGI Volari Z7 */
+#define FB_ACCEL_OMAP1610 49 /* TI OMAP16xx */
+#define FB_ACCEL_TRIDENT_TGUI 50 /* Trident TGUI */
+#define FB_ACCEL_TRIDENT_3DIMAGE 51 /* Trident 3DImage */
+#define FB_ACCEL_TRIDENT_BLADE3D 52 /* Trident Blade3D */
+#define FB_ACCEL_TRIDENT_BLADEXP 53 /* Trident BladeXP */
+#define FB_ACCEL_CIRRUS_ALPINE 53 /* Cirrus Logic 543x/544x/5480 */
+#define FB_ACCEL_NEOMAGIC_NM2070 90 /* NeoMagic NM2070 */
+#define FB_ACCEL_NEOMAGIC_NM2090 91 /* NeoMagic NM2090 */
+#define FB_ACCEL_NEOMAGIC_NM2093 92 /* NeoMagic NM2093 */
+#define FB_ACCEL_NEOMAGIC_NM2097 93 /* NeoMagic NM2097 */
+#define FB_ACCEL_NEOMAGIC_NM2160 94 /* NeoMagic NM2160 */
+#define FB_ACCEL_NEOMAGIC_NM2200 95 /* NeoMagic NM2200 */
+#define FB_ACCEL_NEOMAGIC_NM2230 96 /* NeoMagic NM2230 */
+#define FB_ACCEL_NEOMAGIC_NM2360 97 /* NeoMagic NM2360 */
+#define FB_ACCEL_NEOMAGIC_NM2380 98 /* NeoMagic NM2380 */
+#define FB_ACCEL_PXA3XX 99 /* PXA3xx */
+
+#define FB_ACCEL_SAVAGE4 0x80 /* S3 Savage4 */
+#define FB_ACCEL_SAVAGE3D 0x81 /* S3 Savage3D */
+#define FB_ACCEL_SAVAGE3D_MV 0x82 /* S3 Savage3D-MV */
+#define FB_ACCEL_SAVAGE2000 0x83 /* S3 Savage2000 */
+#define FB_ACCEL_SAVAGE_MX_MV 0x84 /* S3 Savage/MX-MV */
+#define FB_ACCEL_SAVAGE_MX 0x85 /* S3 Savage/MX */
+#define FB_ACCEL_SAVAGE_IX_MV 0x86 /* S3 Savage/IX-MV */
+#define FB_ACCEL_SAVAGE_IX 0x87 /* S3 Savage/IX */
+#define FB_ACCEL_PROSAVAGE_PM 0x88 /* S3 ProSavage PM133 */
+#define FB_ACCEL_PROSAVAGE_KM 0x89 /* S3 ProSavage KM133 */
+#define FB_ACCEL_S3TWISTER_P 0x8a /* S3 Twister */
+#define FB_ACCEL_S3TWISTER_K 0x8b /* S3 TwisterK */
+#define FB_ACCEL_SUPERSAVAGE 0x8c /* S3 Supersavage */
+#define FB_ACCEL_PROSAVAGE_DDR 0x8d /* S3 ProSavage DDR */
+#define FB_ACCEL_PROSAVAGE_DDRK 0x8e /* S3 ProSavage DDR-K */
+
+#define FB_ACCEL_PUV3_UNIGFX 0xa0 /* PKUnity-v3 Unigfx */
+
+#define FB_CAP_FOURCC 1 /* Device supports FOURCC-based formats */
+
+struct fb_fix_screeninfo {
+ char id[16]; /* identification string eg "TT Builtin" */
+ unsigned long smem_start; /* Start of frame buffer mem */
+ /* (physical address) */
+ __u32 smem_len; /* Length of frame buffer mem */
+ __u32 type; /* see FB_TYPE_* */
+ __u32 type_aux; /* Interleave for interleaved Planes */
+ __u32 visual; /* see FB_VISUAL_* */
+ __u16 xpanstep; /* zero if no hardware panning */
+ __u16 ypanstep; /* zero if no hardware panning */
+ __u16 ywrapstep; /* zero if no hardware ywrap */
+ __u32 line_length; /* length of a line in bytes */
+ unsigned long mmio_start; /* Start of Memory Mapped I/O */
+ /* (physical address) */
+ __u32 mmio_len; /* Length of Memory Mapped I/O */
+ __u32 accel; /* Indicate to driver which */
+ /* specific chip/card we have */
+ __u16 capabilities; /* see FB_CAP_* */
+ __u16 reserved[2]; /* Reserved for future compatibility */
+};
+
+/* Interpretation of offset for color fields: All offsets are from the right,
+ * inside a "pixel" value, which is exactly 'bits_per_pixel' wide (means: you
+ * can use the offset as right argument to <<). A pixel afterwards is a bit
+ * stream and is written to video memory as that unmodified.
+ *
+ * For pseudocolor: offset and length should be the same for all color
+ * components. Offset specifies the position of the least significant bit
+ * of the pallette index in a pixel value. Length indicates the number
+ * of available palette entries (i.e. # of entries = 1 << length).
+ */
+struct fb_bitfield {
+ __u32 offset; /* beginning of bitfield */
+ __u32 length; /* length of bitfield */
+ __u32 msb_right; /* != 0 : Most significant bit is */
+ /* right */
+};
+
+#define FB_NONSTD_HAM 1 /* Hold-And-Modify (HAM) */
+#define FB_NONSTD_REV_PIX_IN_B 2 /* order of pixels in each byte is reversed */
+
+#define FB_ACTIVATE_NOW 0 /* set values immediately (or vbl)*/
+#define FB_ACTIVATE_NXTOPEN 1 /* activate on next open */
+#define FB_ACTIVATE_TEST 2 /* don't set, round up impossible */
+#define FB_ACTIVATE_MASK 15
+ /* values */
+#define FB_ACTIVATE_VBL 16 /* activate values on next vbl */
+#define FB_CHANGE_CMAP_VBL 32 /* change colormap on vbl */
+#define FB_ACTIVATE_ALL 64 /* change all VCs on this fb */
+#define FB_ACTIVATE_FORCE 128 /* force apply even when no change*/
+#define FB_ACTIVATE_INV_MODE 256 /* invalidate videomode */
+
+#define FB_ACCELF_TEXT 1 /* (OBSOLETE) see fb_info.flags and vc_mode */
+
+#define FB_SYNC_HOR_HIGH_ACT 1 /* horizontal sync high active */
+#define FB_SYNC_VERT_HIGH_ACT 2 /* vertical sync high active */
+#define FB_SYNC_EXT 4 /* external sync */
+#define FB_SYNC_COMP_HIGH_ACT 8 /* composite sync high active */
+#define FB_SYNC_BROADCAST 16 /* broadcast video timings */
+ /* vtotal = 144d/288n/576i => PAL */
+ /* vtotal = 121d/242n/484i => NTSC */
+#define FB_SYNC_ON_GREEN 32 /* sync on green */
+
+#define FB_VMODE_NONINTERLACED 0 /* non interlaced */
+#define FB_VMODE_INTERLACED 1 /* interlaced */
+#define FB_VMODE_DOUBLE 2 /* double scan */
+#define FB_VMODE_ODD_FLD_FIRST 4 /* interlaced: top line first */
+#define FB_VMODE_MASK 255
+
+#define FB_VMODE_YWRAP 256 /* ywrap instead of panning */
+#define FB_VMODE_SMOOTH_XPAN 512 /* smooth xpan possible (internally used) */
+#define FB_VMODE_CONUPDATE 512 /* don't update x/yoffset */
+
+/*
+ * Display rotation support
+ */
+#define FB_ROTATE_UR 0
+#define FB_ROTATE_CW 1
+#define FB_ROTATE_UD 2
+#define FB_ROTATE_CCW 3
+
+#define PICOS2KHZ(a) (1000000000UL/(a))
+#define KHZ2PICOS(a) (1000000000UL/(a))
+
+struct fb_var_screeninfo {
+ __u32 xres; /* visible resolution */
+ __u32 yres;
+ __u32 xres_virtual; /* virtual resolution */
+ __u32 yres_virtual;
+ __u32 xoffset; /* offset from virtual to visible */
+ __u32 yoffset; /* resolution */
+
+ __u32 bits_per_pixel; /* guess what */
+ __u32 grayscale; /* 0 = color, 1 = grayscale, */
+ /* >1 = FOURCC */
+ struct fb_bitfield red; /* bitfield in fb mem if true color, */
+ struct fb_bitfield green; /* else only length is significant */
+ struct fb_bitfield blue;
+ struct fb_bitfield transp; /* transparency */
+
+ __u32 nonstd; /* != 0 Non standard pixel format */
+
+ __u32 activate; /* see FB_ACTIVATE_* */
+
+ __u32 height; /* height of picture in mm */
+ __u32 width; /* width of picture in mm */
+
+ __u32 accel_flags; /* (OBSOLETE) see fb_info.flags */
+
+ /* Timing: All values in pixclocks, except pixclock (of course) */
+ __u32 pixclock; /* pixel clock in ps (pico seconds) */
+ __u32 left_margin; /* time from sync to picture */
+ __u32 right_margin; /* time from picture to sync */
+ __u32 upper_margin; /* time from sync to picture */
+ __u32 lower_margin;
+ __u32 hsync_len; /* length of horizontal sync */
+ __u32 vsync_len; /* length of vertical sync */
+ __u32 sync; /* see FB_SYNC_* */
+ __u32 vmode; /* see FB_VMODE_* */
+ __u32 rotate; /* angle we rotate counter clockwise */
+ __u32 colorspace; /* colorspace for FOURCC-based modes */
+ __u32 reserved[4]; /* Reserved for future compatibility */
+};
+
+struct fb_cmap {
+ __u32 start; /* First entry */
+ __u32 len; /* Number of entries */
+ __u16 *red; /* Red values */
+ __u16 *green;
+ __u16 *blue;
+ __u16 *transp; /* transparency, can be NULL */
+};
+
+struct fb_con2fbmap {
+ __u32 console;
+ __u32 framebuffer;
+};
+
+/* VESA Blanking Levels */
+#define VESA_NO_BLANKING 0
+#define VESA_VSYNC_SUSPEND 1
+#define VESA_HSYNC_SUSPEND 2
+#define VESA_POWERDOWN 3
+
+
+enum {
+ /* screen: unblanked, hsync: on, vsync: on */
+ FB_BLANK_UNBLANK = VESA_NO_BLANKING,
+
+ /* screen: blanked, hsync: on, vsync: on */
+ FB_BLANK_NORMAL = VESA_NO_BLANKING + 1,
+
+ /* screen: blanked, hsync: on, vsync: off */
+ FB_BLANK_VSYNC_SUSPEND = VESA_VSYNC_SUSPEND + 1,
+
+ /* screen: blanked, hsync: off, vsync: on */
+ FB_BLANK_HSYNC_SUSPEND = VESA_HSYNC_SUSPEND + 1,
+
+ /* screen: blanked, hsync: off, vsync: off */
+ FB_BLANK_POWERDOWN = VESA_POWERDOWN + 1
+};
+
+#define FB_VBLANK_VBLANKING 0x001 /* currently in a vertical blank */
+#define FB_VBLANK_HBLANKING 0x002 /* currently in a horizontal blank */
+#define FB_VBLANK_HAVE_VBLANK 0x004 /* vertical blanks can be detected */
+#define FB_VBLANK_HAVE_HBLANK 0x008 /* horizontal blanks can be detected */
+#define FB_VBLANK_HAVE_COUNT 0x010 /* global retrace counter is available */
+#define FB_VBLANK_HAVE_VCOUNT 0x020 /* the vcount field is valid */
+#define FB_VBLANK_HAVE_HCOUNT 0x040 /* the hcount field is valid */
+#define FB_VBLANK_VSYNCING 0x080 /* currently in a vsync */
+#define FB_VBLANK_HAVE_VSYNC 0x100 /* verical syncs can be detected */
+
+struct fb_vblank {
+ __u32 flags; /* FB_VBLANK flags */
+ __u32 count; /* counter of retraces since boot */
+ __u32 vcount; /* current scanline position */
+ __u32 hcount; /* current scandot position */
+ __u32 reserved[4]; /* reserved for future compatibility */
+};
+
+/* Internal HW accel */
+#define ROP_COPY 0
+#define ROP_XOR 1
+
+struct fb_copyarea {
+ __u32 dx;
+ __u32 dy;
+ __u32 width;
+ __u32 height;
+ __u32 sx;
+ __u32 sy;
+};
+
+struct fb_fillrect {
+ __u32 dx; /* screen-relative */
+ __u32 dy;
+ __u32 width;
+ __u32 height;
+ __u32 color;
+ __u32 rop;
+};
+
+struct fb_image {
+ __u32 dx; /* Where to place image */
+ __u32 dy;
+ __u32 width; /* Size of image */
+ __u32 height;
+ __u32 fg_color; /* Only used when a mono bitmap */
+ __u32 bg_color;
+ __u8 depth; /* Depth of the image */
+ const char *data; /* Pointer to image data */
+ struct fb_cmap cmap; /* color map info */
+};
+
+/*
+ * hardware cursor control
+ */
+
+#define FB_CUR_SETIMAGE 0x01
+#define FB_CUR_SETPOS 0x02
+#define FB_CUR_SETHOT 0x04
+#define FB_CUR_SETCMAP 0x08
+#define FB_CUR_SETSHAPE 0x10
+#define FB_CUR_SETSIZE 0x20
+#define FB_CUR_SETALL 0xFF
+
+struct fbcurpos {
+ __u16 x, y;
+};
+
+struct fb_cursor {
+ __u16 set; /* what to set */
+ __u16 enable; /* cursor on/off */
+ __u16 rop; /* bitop operation */
+ const char *mask; /* cursor mask bits */
+ struct fbcurpos hot; /* cursor hot spot */
+ struct fb_image image; /* Cursor image */
+};
+
+#ifdef CONFIG_FB_BACKLIGHT
+/* Settings for the generic backlight code */
+#define FB_BACKLIGHT_LEVELS 128
+#define FB_BACKLIGHT_MAX 0xFF
+#endif
+
+
+#endif /* _UAPI_LINUX_FB_H */
diff --git a/include/uapi/linux/fcntl.h b/include/uapi/linux/fcntl.h
new file mode 100644
index 0000000..074b886
--- /dev/null
+++ b/include/uapi/linux/fcntl.h
@@ -0,0 +1,52 @@
+#ifndef _UAPI_LINUX_FCNTL_H
+#define _UAPI_LINUX_FCNTL_H
+
+#include <asm/fcntl.h>
+
+#define F_SETLEASE (F_LINUX_SPECIFIC_BASE + 0)
+#define F_GETLEASE (F_LINUX_SPECIFIC_BASE + 1)
+
+/*
+ * Cancel a blocking posix lock; internal use only until we expose an
+ * asynchronous lock api to userspace:
+ */
+#define F_CANCELLK (F_LINUX_SPECIFIC_BASE + 5)
+
+/* Create a file descriptor with FD_CLOEXEC set. */
+#define F_DUPFD_CLOEXEC (F_LINUX_SPECIFIC_BASE + 6)
+
+/*
+ * Request nofications on a directory.
+ * See below for events that may be notified.
+ */
+#define F_NOTIFY (F_LINUX_SPECIFIC_BASE+2)
+
+/*
+ * Set and get of pipe page size array
+ */
+#define F_SETPIPE_SZ (F_LINUX_SPECIFIC_BASE + 7)
+#define F_GETPIPE_SZ (F_LINUX_SPECIFIC_BASE + 8)
+
+/*
+ * Types of directory notifications that may be requested.
+ */
+#define DN_ACCESS 0x00000001 /* File accessed */
+#define DN_MODIFY 0x00000002 /* File modified */
+#define DN_CREATE 0x00000004 /* File created */
+#define DN_DELETE 0x00000008 /* File removed */
+#define DN_RENAME 0x00000010 /* File renamed */
+#define DN_ATTRIB 0x00000020 /* File changed attibutes */
+#define DN_MULTISHOT 0x80000000 /* Don't remove notifier */
+
+#define AT_FDCWD -100 /* Special value used to indicate
+ openat should use the current
+ working directory. */
+#define AT_SYMLINK_NOFOLLOW 0x100 /* Do not follow symbolic links. */
+#define AT_REMOVEDIR 0x200 /* Remove directory instead of
+ unlinking file. */
+#define AT_SYMLINK_FOLLOW 0x400 /* Follow symbolic links. */
+#define AT_NO_AUTOMOUNT 0x800 /* Suppress terminal automount traversal */
+#define AT_EMPTY_PATH 0x1000 /* Allow empty relative pathname */
+
+
+#endif /* _UAPI_LINUX_FCNTL_H */
diff --git a/include/uapi/linux/fd.h b/include/uapi/linux/fd.h
new file mode 100644
index 0000000..f1f3dd5
--- /dev/null
+++ b/include/uapi/linux/fd.h
@@ -0,0 +1,382 @@
+#ifndef _UAPI_LINUX_FD_H
+#define _UAPI_LINUX_FD_H
+
+#include <linux/ioctl.h>
+#include <linux/compiler.h>
+
+/* New file layout: Now the ioctl definitions immediately follow the
+ * definitions of the structures that they use */
+
+/*
+ * Geometry
+ */
+struct floppy_struct {
+ unsigned int size, /* nr of sectors total */
+ sect, /* sectors per track */
+ head, /* nr of heads */
+ track, /* nr of tracks */
+ stretch; /* bit 0 !=0 means double track steps */
+ /* bit 1 != 0 means swap sides */
+ /* bits 2..9 give the first sector */
+ /* number (the LSB is flipped) */
+#define FD_STRETCH 1
+#define FD_SWAPSIDES 2
+#define FD_ZEROBASED 4
+#define FD_SECTBASEMASK 0x3FC
+#define FD_MKSECTBASE(s) (((s) ^ 1) << 2)
+#define FD_SECTBASE(floppy) ((((floppy)->stretch & FD_SECTBASEMASK) >> 2) ^ 1)
+
+ unsigned char gap, /* gap1 size */
+
+ rate, /* data rate. |= 0x40 for perpendicular */
+#define FD_2M 0x4
+#define FD_SIZECODEMASK 0x38
+#define FD_SIZECODE(floppy) (((((floppy)->rate&FD_SIZECODEMASK)>> 3)+ 2) %8)
+#define FD_SECTSIZE(floppy) ( (floppy)->rate & FD_2M ? \
+ 512 : 128 << FD_SIZECODE(floppy) )
+#define FD_PERP 0x40
+
+ spec1, /* stepping rate, head unload time */
+ fmt_gap; /* gap2 size */
+ const char * name; /* used only for predefined formats */
+};
+
+
+/* commands needing write access have 0x40 set */
+/* commands needing super user access have 0x80 set */
+
+#define FDCLRPRM _IO(2, 0x41)
+/* clear user-defined parameters */
+
+#define FDSETPRM _IOW(2, 0x42, struct floppy_struct)
+#define FDSETMEDIAPRM FDSETPRM
+/* set user-defined parameters for current media */
+
+#define FDDEFPRM _IOW(2, 0x43, struct floppy_struct)
+#define FDGETPRM _IOR(2, 0x04, struct floppy_struct)
+#define FDDEFMEDIAPRM FDDEFPRM
+#define FDGETMEDIAPRM FDGETPRM
+/* set/get disk parameters */
+
+
+#define FDMSGON _IO(2,0x45)
+#define FDMSGOFF _IO(2,0x46)
+/* issue/don't issue kernel messages on media type change */
+
+
+/*
+ * Formatting (obsolete)
+ */
+#define FD_FILL_BYTE 0xF6 /* format fill byte. */
+
+struct format_descr {
+ unsigned int device,head,track;
+};
+
+#define FDFMTBEG _IO(2,0x47)
+/* begin formatting a disk */
+#define FDFMTTRK _IOW(2,0x48, struct format_descr)
+/* format the specified track */
+#define FDFMTEND _IO(2,0x49)
+/* end formatting a disk */
+
+
+/*
+ * Error thresholds
+ */
+struct floppy_max_errors {
+ unsigned int
+ abort, /* number of errors to be reached before aborting */
+ read_track, /* maximal number of errors permitted to read an
+ * entire track at once */
+ reset, /* maximal number of errors before a reset is tried */
+ recal, /* maximal number of errors before a recalibrate is
+ * tried */
+
+ /*
+ * Threshold for reporting FDC errors to the console.
+ * Setting this to zero may flood your screen when using
+ * ultra cheap floppies ;-)
+ */
+ reporting;
+
+};
+
+#define FDSETEMSGTRESH _IO(2,0x4a)
+/* set fdc error reporting threshold */
+
+#define FDFLUSH _IO(2,0x4b)
+/* flush buffers for media; either for verifying media, or for
+ * handling a media change without closing the file descriptor */
+
+#define FDSETMAXERRS _IOW(2, 0x4c, struct floppy_max_errors)
+#define FDGETMAXERRS _IOR(2, 0x0e, struct floppy_max_errors)
+/* set/get abortion and read_track threshold. See also floppy_drive_params
+ * structure */
+
+
+typedef char floppy_drive_name[16];
+#define FDGETDRVTYP _IOR(2, 0x0f, floppy_drive_name)
+/* get drive type: 5 1/4 or 3 1/2 */
+
+
+/*
+ * Drive parameters (user modifiable)
+ */
+struct floppy_drive_params {
+ signed char cmos; /* CMOS type */
+
+ /* Spec2 is (HLD<<1 | ND), where HLD is head load time (1=2ms, 2=4 ms
+ * etc) and ND is set means no DMA. Hardcoded to 6 (HLD=6ms, use DMA).
+ */
+ unsigned long max_dtr; /* Step rate, usec */
+ unsigned long hlt; /* Head load/settle time, msec */
+ unsigned long hut; /* Head unload time (remnant of
+ * 8" drives) */
+ unsigned long srt; /* Step rate, usec */
+
+ unsigned long spinup; /* time needed for spinup (expressed
+ * in jiffies) */
+ unsigned long spindown; /* timeout needed for spindown */
+ unsigned char spindown_offset; /* decides in which position the disk
+ * will stop */
+ unsigned char select_delay; /* delay to wait after select */
+ unsigned char rps; /* rotations per second */
+ unsigned char tracks; /* maximum number of tracks */
+ unsigned long timeout; /* timeout for interrupt requests */
+
+ unsigned char interleave_sect; /* if there are more sectors, use
+ * interleave */
+
+ struct floppy_max_errors max_errors;
+
+ char flags; /* various flags, including ftd_msg */
+/*
+ * Announce successful media type detection and media information loss after
+ * disk changes.
+ * Also used to enable/disable printing of overrun warnings.
+ */
+
+#define FTD_MSG 0x10
+#define FD_BROKEN_DCL 0x20
+#define FD_DEBUG 0x02
+#define FD_SILENT_DCL_CLEAR 0x4
+#define FD_INVERTED_DCL 0x80 /* must be 0x80, because of hardware
+ considerations */
+
+ char read_track; /* use readtrack during probing? */
+
+/*
+ * Auto-detection. Each drive type has eight formats which are
+ * used in succession to try to read the disk. If the FDC cannot lock onto
+ * the disk, the next format is tried. This uses the variable 'probing'.
+ */
+ short autodetect[8]; /* autodetected formats */
+
+ int checkfreq; /* how often should the drive be checked for disk
+ * changes */
+ int native_format; /* native format of this drive */
+};
+
+enum {
+ FD_NEED_TWADDLE_BIT, /* more magic */
+ FD_VERIFY_BIT, /* inquire for write protection */
+ FD_DISK_NEWCHANGE_BIT, /* change detected, and no action undertaken yet
+ * to clear media change status */
+ FD_UNUSED_BIT,
+ FD_DISK_CHANGED_BIT, /* disk has been changed since last i/o */
+ FD_DISK_WRITABLE_BIT /* disk is writable */
+};
+
+#define FDSETDRVPRM _IOW(2, 0x90, struct floppy_drive_params)
+#define FDGETDRVPRM _IOR(2, 0x11, struct floppy_drive_params)
+/* set/get drive parameters */
+
+
+/*
+ * Current drive state (not directly modifiable by user, readonly)
+ */
+struct floppy_drive_struct {
+ unsigned long flags;
+/* values for these flags */
+#define FD_NEED_TWADDLE (1 << FD_NEED_TWADDLE_BIT)
+#define FD_VERIFY (1 << FD_VERIFY_BIT)
+#define FD_DISK_NEWCHANGE (1 << FD_DISK_NEWCHANGE_BIT)
+#define FD_DISK_CHANGED (1 << FD_DISK_CHANGED_BIT)
+#define FD_DISK_WRITABLE (1 << FD_DISK_WRITABLE_BIT)
+
+ unsigned long spinup_date;
+ unsigned long select_date;
+ unsigned long first_read_date;
+ short probed_format;
+ short track; /* current track */
+ short maxblock; /* id of highest block read */
+ short maxtrack; /* id of highest half track read */
+ int generation; /* how many diskchanges? */
+
+/*
+ * (User-provided) media information is _not_ discarded after a media change
+ * if the corresponding keep_data flag is non-zero. Positive values are
+ * decremented after each probe.
+ */
+ int keep_data;
+
+ /* Prevent "aliased" accesses. */
+ int fd_ref;
+ int fd_device;
+ unsigned long last_checked; /* when was the drive last checked for a disk
+ * change? */
+
+ char *dmabuf;
+ int bufblocks;
+};
+
+#define FDGETDRVSTAT _IOR(2, 0x12, struct floppy_drive_struct)
+#define FDPOLLDRVSTAT _IOR(2, 0x13, struct floppy_drive_struct)
+/* get drive state: GET returns the cached state, POLL polls for new state */
+
+
+/*
+ * reset FDC
+ */
+enum reset_mode {
+ FD_RESET_IF_NEEDED, /* reset only if the reset flags is set */
+ FD_RESET_IF_RAWCMD, /* obsolete */
+ FD_RESET_ALWAYS /* reset always */
+};
+#define FDRESET _IO(2, 0x54)
+
+
+/*
+ * FDC state
+ */
+struct floppy_fdc_state {
+ int spec1; /* spec1 value last used */
+ int spec2; /* spec2 value last used */
+ int dtr;
+ unsigned char version; /* FDC version code */
+ unsigned char dor;
+ unsigned long address; /* io address */
+ unsigned int rawcmd:2;
+ unsigned int reset:1;
+ unsigned int need_configure:1;
+ unsigned int perp_mode:2;
+ unsigned int has_fifo:1;
+ unsigned int driver_version; /* version code for floppy driver */
+#define FD_DRIVER_VERSION 0x100
+/* user programs using the floppy API should use floppy_fdc_state to
+ * get the version number of the floppy driver that they are running
+ * on. If this version number is bigger than the one compiled into the
+ * user program (the FD_DRIVER_VERSION define), it should be prepared
+ * to bigger structures
+ */
+
+ unsigned char track[4];
+ /* Position of the heads of the 4 units attached to this FDC,
+ * as stored on the FDC. In the future, the position as stored
+ * on the FDC might not agree with the actual physical
+ * position of these drive heads. By allowing such
+ * disagreement, it will be possible to reset the FDC without
+ * incurring the expensive cost of repositioning all heads.
+ * Right now, these positions are hard wired to 0. */
+
+};
+
+#define FDGETFDCSTAT _IOR(2, 0x15, struct floppy_fdc_state)
+
+
+/*
+ * Asynchronous Write error tracking
+ */
+struct floppy_write_errors {
+ /* Write error logging.
+ *
+ * These fields can be cleared with the FDWERRORCLR ioctl.
+ * Only writes that were attempted but failed due to a physical media
+ * error are logged. write(2) calls that fail and return an error code
+ * to the user process are not counted.
+ */
+
+ unsigned int write_errors; /* number of physical write errors
+ * encountered */
+
+ /* position of first and last write errors */
+ unsigned long first_error_sector;
+ int first_error_generation;
+ unsigned long last_error_sector;
+ int last_error_generation;
+
+ unsigned int badness; /* highest retry count for a read or write
+ * operation */
+};
+
+#define FDWERRORCLR _IO(2, 0x56)
+/* clear write error and badness information */
+#define FDWERRORGET _IOR(2, 0x17, struct floppy_write_errors)
+/* get write error and badness information */
+
+
+/*
+ * Raw commands
+ */
+/* new interface flag: now we can do them in batches */
+#define FDHAVEBATCHEDRAWCMD
+
+struct floppy_raw_cmd {
+ unsigned int flags;
+#define FD_RAW_READ 1
+#define FD_RAW_WRITE 2
+#define FD_RAW_NO_MOTOR 4
+#define FD_RAW_DISK_CHANGE 4 /* out: disk change flag was set */
+#define FD_RAW_INTR 8 /* wait for an interrupt */
+#define FD_RAW_SPIN 0x10 /* spin up the disk for this command */
+#define FD_RAW_NO_MOTOR_AFTER 0x20 /* switch the motor off after command
+ * completion */
+#define FD_RAW_NEED_DISK 0x40 /* this command needs a disk to be present */
+#define FD_RAW_NEED_SEEK 0x80 /* this command uses an implied seek (soft) */
+
+/* more "in" flags */
+#define FD_RAW_MORE 0x100 /* more records follow */
+#define FD_RAW_STOP_IF_FAILURE 0x200 /* stop if we encounter a failure */
+#define FD_RAW_STOP_IF_SUCCESS 0x400 /* stop if command successful */
+#define FD_RAW_SOFTFAILURE 0x800 /* consider the return value for failure
+ * detection too */
+
+/* more "out" flags */
+#define FD_RAW_FAILURE 0x10000 /* command sent to fdc, fdc returned error */
+#define FD_RAW_HARDFAILURE 0x20000 /* fdc had to be reset, or timed out */
+
+ void __user *data;
+ char *kernel_data; /* location of data buffer in the kernel */
+ struct floppy_raw_cmd *next; /* used for chaining of raw cmd's
+ * within the kernel */
+ long length; /* in: length of dma transfer. out: remaining bytes */
+ long phys_length; /* physical length, if different from dma length */
+ int buffer_length; /* length of allocated buffer */
+
+ unsigned char rate;
+ unsigned char cmd_count;
+ unsigned char cmd[16];
+ unsigned char reply_count;
+ unsigned char reply[16];
+ int track;
+ int resultcode;
+
+ int reserved1;
+ int reserved2;
+};
+
+#define FDRAWCMD _IO(2, 0x58)
+/* send a raw command to the fdc. Structure size not included, because of
+ * batches */
+
+#define FDTWADDLE _IO(2, 0x59)
+/* flicker motor-on bit before reading a sector. Experimental */
+
+
+#define FDEJECT _IO(2, 0x5a)
+/* eject the disk */
+
+
+
+#endif /* _UAPI_LINUX_FD_H */
diff --git a/include/linux/fdreg.h b/include/uapi/linux/fdreg.h
similarity index 100%
rename from include/linux/fdreg.h
rename to include/uapi/linux/fdreg.h
diff --git a/include/linux/fib_rules.h b/include/uapi/linux/fib_rules.h
similarity index 100%
rename from include/linux/fib_rules.h
rename to include/uapi/linux/fib_rules.h
diff --git a/include/linux/fiemap.h b/include/uapi/linux/fiemap.h
similarity index 100%
rename from include/linux/fiemap.h
rename to include/uapi/linux/fiemap.h
diff --git a/include/uapi/linux/filter.h b/include/uapi/linux/filter.h
new file mode 100644
index 0000000..3d79224
--- /dev/null
+++ b/include/uapi/linux/filter.h
@@ -0,0 +1,135 @@
+/*
+ * Linux Socket Filter Data Structures
+ */
+
+#ifndef _UAPI__LINUX_FILTER_H__
+#define _UAPI__LINUX_FILTER_H__
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+
+
+/*
+ * Current version of the filter code architecture.
+ */
+#define BPF_MAJOR_VERSION 1
+#define BPF_MINOR_VERSION 1
+
+/*
+ * Try and keep these values and structures similar to BSD, especially
+ * the BPF code definitions which need to match so you can share filters
+ */
+
+struct sock_filter { /* Filter block */
+ __u16 code; /* Actual filter code */
+ __u8 jt; /* Jump true */
+ __u8 jf; /* Jump false */
+ __u32 k; /* Generic multiuse field */
+};
+
+struct sock_fprog { /* Required for SO_ATTACH_FILTER. */
+ unsigned short len; /* Number of filter blocks */
+ struct sock_filter __user *filter;
+};
+
+/*
+ * Instruction classes
+ */
+
+#define BPF_CLASS(code) ((code) & 0x07)
+#define BPF_LD 0x00
+#define BPF_LDX 0x01
+#define BPF_ST 0x02
+#define BPF_STX 0x03
+#define BPF_ALU 0x04
+#define BPF_JMP 0x05
+#define BPF_RET 0x06
+#define BPF_MISC 0x07
+
+/* ld/ldx fields */
+#define BPF_SIZE(code) ((code) & 0x18)
+#define BPF_W 0x00
+#define BPF_H 0x08
+#define BPF_B 0x10
+#define BPF_MODE(code) ((code) & 0xe0)
+#define BPF_IMM 0x00
+#define BPF_ABS 0x20
+#define BPF_IND 0x40
+#define BPF_MEM 0x60
+#define BPF_LEN 0x80
+#define BPF_MSH 0xa0
+
+/* alu/jmp fields */
+#define BPF_OP(code) ((code) & 0xf0)
+#define BPF_ADD 0x00
+#define BPF_SUB 0x10
+#define BPF_MUL 0x20
+#define BPF_DIV 0x30
+#define BPF_OR 0x40
+#define BPF_AND 0x50
+#define BPF_LSH 0x60
+#define BPF_RSH 0x70
+#define BPF_NEG 0x80
+#define BPF_MOD 0x90
+#define BPF_XOR 0xa0
+
+#define BPF_JA 0x00
+#define BPF_JEQ 0x10
+#define BPF_JGT 0x20
+#define BPF_JGE 0x30
+#define BPF_JSET 0x40
+#define BPF_SRC(code) ((code) & 0x08)
+#define BPF_K 0x00
+#define BPF_X 0x08
+
+/* ret - BPF_K and BPF_X also apply */
+#define BPF_RVAL(code) ((code) & 0x18)
+#define BPF_A 0x10
+
+/* misc */
+#define BPF_MISCOP(code) ((code) & 0xf8)
+#define BPF_TAX 0x00
+#define BPF_TXA 0x80
+
+#ifndef BPF_MAXINSNS
+#define BPF_MAXINSNS 4096
+#endif
+
+/*
+ * Macros for filter block array initializers.
+ */
+#ifndef BPF_STMT
+#define BPF_STMT(code, k) { (unsigned short)(code), 0, 0, k }
+#endif
+#ifndef BPF_JUMP
+#define BPF_JUMP(code, k, jt, jf) { (unsigned short)(code), jt, jf, k }
+#endif
+
+/*
+ * Number of scratch memory words for: BPF_ST and BPF_STX
+ */
+#define BPF_MEMWORDS 16
+
+/* RATIONALE. Negative offsets are invalid in BPF.
+ We use them to reference ancillary data.
+ Unlike introduction new instructions, it does not break
+ existing compilers/optimizers.
+ */
+#define SKF_AD_OFF (-0x1000)
+#define SKF_AD_PROTOCOL 0
+#define SKF_AD_PKTTYPE 4
+#define SKF_AD_IFINDEX 8
+#define SKF_AD_NLATTR 12
+#define SKF_AD_NLATTR_NEST 16
+#define SKF_AD_MARK 20
+#define SKF_AD_QUEUE 24
+#define SKF_AD_HATYPE 28
+#define SKF_AD_RXHASH 32
+#define SKF_AD_CPU 36
+#define SKF_AD_ALU_XOR_X 40
+#define SKF_AD_MAX 44
+#define SKF_NET_OFF (-0x100000)
+#define SKF_LL_OFF (-0x200000)
+
+
+#endif /* _UAPI__LINUX_FILTER_H__ */
diff --git a/include/linux/firewire-cdev.h b/include/uapi/linux/firewire-cdev.h
similarity index 100%
rename from include/linux/firewire-cdev.h
rename to include/uapi/linux/firewire-cdev.h
diff --git a/include/linux/firewire-constants.h b/include/uapi/linux/firewire-constants.h
similarity index 100%
rename from include/linux/firewire-constants.h
rename to include/uapi/linux/firewire-constants.h
diff --git a/include/uapi/linux/flat.h b/include/uapi/linux/flat.h
new file mode 100644
index 0000000..88cd6ba
--- /dev/null
+++ b/include/uapi/linux/flat.h
@@ -0,0 +1,58 @@
+/*
+ * Copyright (C) 2002-2003 David McCullough <davidm@snapgear.com>
+ * Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com>
+ * The Silver Hammer Group, Ltd.
+ *
+ * This file provides the definitions and structures needed to
+ * support uClinux flat-format executables.
+ */
+
+#ifndef _UAPI_LINUX_FLAT_H
+#define _UAPI_LINUX_FLAT_H
+
+
+#define FLAT_VERSION 0x00000004L
+
+#ifdef CONFIG_BINFMT_SHARED_FLAT
+#define MAX_SHARED_LIBS (4)
+#else
+#define MAX_SHARED_LIBS (1)
+#endif
+
+/*
+ * To make everything easier to port and manage cross platform
+ * development, all fields are in network byte order.
+ */
+
+struct flat_hdr {
+ char magic[4];
+ unsigned long rev; /* version (as above) */
+ unsigned long entry; /* Offset of first executable instruction
+ with text segment from beginning of file */
+ unsigned long data_start; /* Offset of data segment from beginning of
+ file */
+ unsigned long data_end; /* Offset of end of data segment
+ from beginning of file */
+ unsigned long bss_end; /* Offset of end of bss segment from beginning
+ of file */
+
+ /* (It is assumed that data_end through bss_end forms the bss segment.) */
+
+ unsigned long stack_size; /* Size of stack, in bytes */
+ unsigned long reloc_start; /* Offset of relocation records from
+ beginning of file */
+ unsigned long reloc_count; /* Number of relocation records */
+ unsigned long flags;
+ unsigned long build_date; /* When the program/library was built */
+ unsigned long filler[5]; /* Reservered, set to zero */
+};
+
+#define FLAT_FLAG_RAM 0x0001 /* load program entirely into RAM */
+#define FLAT_FLAG_GOTPIC 0x0002 /* program is PIC with GOT */
+#define FLAT_FLAG_GZIP 0x0004 /* all but the header is compressed */
+#define FLAT_FLAG_GZDATA 0x0008 /* only data/relocs are compressed (for XIP) */
+#define FLAT_FLAG_KTRACE 0x0010 /* output useful kernel trace for debugging */
+
+
+
+#endif /* _UAPI_LINUX_FLAT_H */
diff --git a/include/uapi/linux/fs.h b/include/uapi/linux/fs.h
new file mode 100644
index 0000000..9fcc880
--- /dev/null
+++ b/include/uapi/linux/fs.h
@@ -0,0 +1,334 @@
+#ifndef _UAPI_LINUX_FS_H
+#define _UAPI_LINUX_FS_H
+
+/*
+ * This file has definitions for some important file table
+ * structures etc.
+ */
+
+#include <linux/limits.h>
+#include <linux/ioctl.h>
+#include <linux/types.h>
+
+/*
+ * It's silly to have NR_OPEN bigger than NR_FILE, but you can change
+ * the file limit at runtime and only root can increase the per-process
+ * nr_file rlimit, so it's safe to set up a ridiculously high absolute
+ * upper limit on files-per-process.
+ *
+ * Some programs (notably those using select()) may have to be
+ * recompiled to take full advantage of the new limits..
+ */
+
+/* Fixed constants first: */
+#undef NR_OPEN
+#define INR_OPEN_CUR 1024 /* Initial setting for nfile rlimits */
+#define INR_OPEN_MAX 4096 /* Hard limit for nfile rlimits */
+
+#define BLOCK_SIZE_BITS 10
+#define BLOCK_SIZE (1<<BLOCK_SIZE_BITS)
+
+#define SEEK_SET 0 /* seek relative to beginning of file */
+#define SEEK_CUR 1 /* seek relative to current file position */
+#define SEEK_END 2 /* seek relative to end of file */
+#define SEEK_DATA 3 /* seek to the next data */
+#define SEEK_HOLE 4 /* seek to the next hole */
+#define SEEK_MAX SEEK_HOLE
+
+struct fstrim_range {
+ __u64 start;
+ __u64 len;
+ __u64 minlen;
+};
+
+/* And dynamically-tunable limits and defaults: */
+struct files_stat_struct {
+ unsigned long nr_files; /* read only */
+ unsigned long nr_free_files; /* read only */
+ unsigned long max_files; /* tunable */
+};
+
+struct inodes_stat_t {
+ int nr_inodes;
+ int nr_unused;
+ int dummy[5]; /* padding for sysctl ABI compatibility */
+};
+
+
+#define NR_FILE 8192 /* this can well be larger on a larger system */
+
+#define MAY_EXEC 0x00000001
+#define MAY_WRITE 0x00000002
+#define MAY_READ 0x00000004
+#define MAY_APPEND 0x00000008
+#define MAY_ACCESS 0x00000010
+#define MAY_OPEN 0x00000020
+#define MAY_CHDIR 0x00000040
+/* called from RCU mode, don't block */
+#define MAY_NOT_BLOCK 0x00000080
+
+/*
+ * flags in file.f_mode. Note that FMODE_READ and FMODE_WRITE must correspond
+ * to O_WRONLY and O_RDWR via the strange trick in __dentry_open()
+ */
+
+/* file is open for reading */
+#define FMODE_READ ((__force fmode_t)0x1)
+/* file is open for writing */
+#define FMODE_WRITE ((__force fmode_t)0x2)
+/* file is seekable */
+#define FMODE_LSEEK ((__force fmode_t)0x4)
+/* file can be accessed using pread */
+#define FMODE_PREAD ((__force fmode_t)0x8)
+/* file can be accessed using pwrite */
+#define FMODE_PWRITE ((__force fmode_t)0x10)
+/* File is opened for execution with sys_execve / sys_uselib */
+#define FMODE_EXEC ((__force fmode_t)0x20)
+/* File is opened with O_NDELAY (only set for block devices) */
+#define FMODE_NDELAY ((__force fmode_t)0x40)
+/* File is opened with O_EXCL (only set for block devices) */
+#define FMODE_EXCL ((__force fmode_t)0x80)
+/* File is opened using open(.., 3, ..) and is writeable only for ioctls
+ (specialy hack for floppy.c) */
+#define FMODE_WRITE_IOCTL ((__force fmode_t)0x100)
+/* 32bit hashes as llseek() offset (for directories) */
+#define FMODE_32BITHASH ((__force fmode_t)0x200)
+/* 64bit hashes as llseek() offset (for directories) */
+#define FMODE_64BITHASH ((__force fmode_t)0x400)
+
+/*
+ * Don't update ctime and mtime.
+ *
+ * Currently a special hack for the XFS open_by_handle ioctl, but we'll
+ * hopefully graduate it to a proper O_CMTIME flag supported by open(2) soon.
+ */
+#define FMODE_NOCMTIME ((__force fmode_t)0x800)
+
+/* Expect random access pattern */
+#define FMODE_RANDOM ((__force fmode_t)0x1000)
+
+/* File is huge (eg. /dev/kmem): treat loff_t as unsigned */
+#define FMODE_UNSIGNED_OFFSET ((__force fmode_t)0x2000)
+
+/* File is opened with O_PATH; almost nothing can be done with it */
+#define FMODE_PATH ((__force fmode_t)0x4000)
+
+/* File was opened by fanotify and shouldn't generate fanotify events */
+#define FMODE_NONOTIFY ((__force fmode_t)0x1000000)
+
+/*
+ * Flag for rw_copy_check_uvector and compat_rw_copy_check_uvector
+ * that indicates that they should check the contents of the iovec are
+ * valid, but not check the memory that the iovec elements
+ * points too.
+ */
+#define CHECK_IOVEC_ONLY -1
+
+#define SEL_IN 1
+#define SEL_OUT 2
+#define SEL_EX 4
+
+/* public flags for file_system_type */
+#define FS_REQUIRES_DEV 1
+#define FS_BINARY_MOUNTDATA 2
+#define FS_HAS_SUBTYPE 4
+#define FS_REVAL_DOT 16384 /* Check the paths ".", ".." for staleness */
+#define FS_RENAME_DOES_D_MOVE 32768 /* FS will handle d_move()
+ * during rename() internally.
+ */
+
+/*
+ * These are the fs-independent mount-flags: up to 32 flags are supported
+ */
+#define MS_RDONLY 1 /* Mount read-only */
+#define MS_NOSUID 2 /* Ignore suid and sgid bits */
+#define MS_NODEV 4 /* Disallow access to device special files */
+#define MS_NOEXEC 8 /* Disallow program execution */
+#define MS_SYNCHRONOUS 16 /* Writes are synced at once */
+#define MS_REMOUNT 32 /* Alter flags of a mounted FS */
+#define MS_MANDLOCK 64 /* Allow mandatory locks on an FS */
+#define MS_DIRSYNC 128 /* Directory modifications are synchronous */
+#define MS_NOATIME 1024 /* Do not update access times. */
+#define MS_NODIRATIME 2048 /* Do not update directory access times */
+#define MS_BIND 4096
+#define MS_MOVE 8192
+#define MS_REC 16384
+#define MS_VERBOSE 32768 /* War is peace. Verbosity is silence.
+ MS_VERBOSE is deprecated. */
+#define MS_SILENT 32768
+#define MS_POSIXACL (1<<16) /* VFS does not apply the umask */
+#define MS_UNBINDABLE (1<<17) /* change to unbindable */
+#define MS_PRIVATE (1<<18) /* change to private */
+#define MS_SLAVE (1<<19) /* change to slave */
+#define MS_SHARED (1<<20) /* change to shared */
+#define MS_RELATIME (1<<21) /* Update atime relative to mtime/ctime. */
+#define MS_KERNMOUNT (1<<22) /* this is a kern_mount call */
+#define MS_I_VERSION (1<<23) /* Update inode I_version field */
+#define MS_STRICTATIME (1<<24) /* Always perform atime updates */
+#define MS_NOSEC (1<<28)
+#define MS_BORN (1<<29)
+#define MS_ACTIVE (1<<30)
+#define MS_NOUSER (1<<31)
+
+/*
+ * Superblock flags that can be altered by MS_REMOUNT
+ */
+#define MS_RMT_MASK (MS_RDONLY|MS_SYNCHRONOUS|MS_MANDLOCK|MS_I_VERSION)
+
+/*
+ * Old magic mount flag and mask
+ */
+#define MS_MGC_VAL 0xC0ED0000
+#define MS_MGC_MSK 0xffff0000
+
+/* Inode flags - they have nothing to superblock flags now */
+
+#define S_SYNC 1 /* Writes are synced at once */
+#define S_NOATIME 2 /* Do not update access times */
+#define S_APPEND 4 /* Append-only file */
+#define S_IMMUTABLE 8 /* Immutable file */
+#define S_DEAD 16 /* removed, but still open directory */
+#define S_NOQUOTA 32 /* Inode is not counted to quota */
+#define S_DIRSYNC 64 /* Directory modifications are synchronous */
+#define S_NOCMTIME 128 /* Do not update file c/mtime */
+#define S_SWAPFILE 256 /* Do not truncate: swapon got its bmaps */
+#define S_PRIVATE 512 /* Inode is fs-internal */
+#define S_IMA 1024 /* Inode has an associated IMA struct */
+#define S_AUTOMOUNT 2048 /* Automount/referral quasi-directory */
+#define S_NOSEC 4096 /* no suid or xattr security attributes */
+
+/*
+ * Note that nosuid etc flags are inode-specific: setting some file-system
+ * flags just means all the inodes inherit those flags by default. It might be
+ * possible to override it selectively if you really wanted to with some
+ * ioctl() that is not currently implemented.
+ *
+ * Exception: MS_RDONLY is always applied to the entire file system.
+ *
+ * Unfortunately, it is possible to change a filesystems flags with it mounted
+ * with files in use. This means that all of the inodes will not have their
+ * i_flags updated. Hence, i_flags no longer inherit the superblock mount
+ * flags, so these have to be checked separately. -- rmk@arm.uk.linux.org
+ */
+#define __IS_FLG(inode,flg) ((inode)->i_sb->s_flags & (flg))
+
+#define IS_RDONLY(inode) ((inode)->i_sb->s_flags & MS_RDONLY)
+#define IS_SYNC(inode) (__IS_FLG(inode, MS_SYNCHRONOUS) || \
+ ((inode)->i_flags & S_SYNC))
+#define IS_DIRSYNC(inode) (__IS_FLG(inode, MS_SYNCHRONOUS|MS_DIRSYNC) || \
+ ((inode)->i_flags & (S_SYNC|S_DIRSYNC)))
+#define IS_MANDLOCK(inode) __IS_FLG(inode, MS_MANDLOCK)
+#define IS_NOATIME(inode) __IS_FLG(inode, MS_RDONLY|MS_NOATIME)
+#define IS_I_VERSION(inode) __IS_FLG(inode, MS_I_VERSION)
+
+#define IS_NOQUOTA(inode) ((inode)->i_flags & S_NOQUOTA)
+#define IS_APPEND(inode) ((inode)->i_flags & S_APPEND)
+#define IS_IMMUTABLE(inode) ((inode)->i_flags & S_IMMUTABLE)
+#define IS_POSIXACL(inode) __IS_FLG(inode, MS_POSIXACL)
+
+#define IS_DEADDIR(inode) ((inode)->i_flags & S_DEAD)
+#define IS_NOCMTIME(inode) ((inode)->i_flags & S_NOCMTIME)
+#define IS_SWAPFILE(inode) ((inode)->i_flags & S_SWAPFILE)
+#define IS_PRIVATE(inode) ((inode)->i_flags & S_PRIVATE)
+#define IS_IMA(inode) ((inode)->i_flags & S_IMA)
+#define IS_AUTOMOUNT(inode) ((inode)->i_flags & S_AUTOMOUNT)
+#define IS_NOSEC(inode) ((inode)->i_flags & S_NOSEC)
+
+/* the read-only stuff doesn't really belong here, but any other place is
+ probably as bad and I don't want to create yet another include file. */
+
+#define BLKROSET _IO(0x12,93) /* set device read-only (0 = read-write) */
+#define BLKROGET _IO(0x12,94) /* get read-only status (0 = read_write) */
+#define BLKRRPART _IO(0x12,95) /* re-read partition table */
+#define BLKGETSIZE _IO(0x12,96) /* return device size /512 (long *arg) */
+#define BLKFLSBUF _IO(0x12,97) /* flush buffer cache */
+#define BLKRASET _IO(0x12,98) /* set read ahead for block device */
+#define BLKRAGET _IO(0x12,99) /* get current read ahead setting */
+#define BLKFRASET _IO(0x12,100)/* set filesystem (mm/filemap.c) read-ahead */
+#define BLKFRAGET _IO(0x12,101)/* get filesystem (mm/filemap.c) read-ahead */
+#define BLKSECTSET _IO(0x12,102)/* set max sectors per request (ll_rw_blk.c) */
+#define BLKSECTGET _IO(0x12,103)/* get max sectors per request (ll_rw_blk.c) */
+#define BLKSSZGET _IO(0x12,104)/* get block device sector size */
+#if 0
+#define BLKPG _IO(0x12,105)/* See blkpg.h */
+
+/* Some people are morons. Do not use sizeof! */
+
+#define BLKELVGET _IOR(0x12,106,size_t)/* elevator get */
+#define BLKELVSET _IOW(0x12,107,size_t)/* elevator set */
+/* This was here just to show that the number is taken -
+ probably all these _IO(0x12,*) ioctls should be moved to blkpg.h. */
+#endif
+/* A jump here: 108-111 have been used for various private purposes. */
+#define BLKBSZGET _IOR(0x12,112,size_t)
+#define BLKBSZSET _IOW(0x12,113,size_t)
+#define BLKGETSIZE64 _IOR(0x12,114,size_t) /* return device size in bytes (u64 *arg) */
+#define BLKTRACESETUP _IOWR(0x12,115,struct blk_user_trace_setup)
+#define BLKTRACESTART _IO(0x12,116)
+#define BLKTRACESTOP _IO(0x12,117)
+#define BLKTRACETEARDOWN _IO(0x12,118)
+#define BLKDISCARD _IO(0x12,119)
+#define BLKIOMIN _IO(0x12,120)
+#define BLKIOOPT _IO(0x12,121)
+#define BLKALIGNOFF _IO(0x12,122)
+#define BLKPBSZGET _IO(0x12,123)
+#define BLKDISCARDZEROES _IO(0x12,124)
+#define BLKSECDISCARD _IO(0x12,125)
+#define BLKROTATIONAL _IO(0x12,126)
+#define BLKZEROOUT _IO(0x12,127)
+
+#define BMAP_IOCTL 1 /* obsolete - kept for compatibility */
+#define FIBMAP _IO(0x00,1) /* bmap access */
+#define FIGETBSZ _IO(0x00,2) /* get the block size used for bmap */
+#define FIFREEZE _IOWR('X', 119, int) /* Freeze */
+#define FITHAW _IOWR('X', 120, int) /* Thaw */
+#define FITRIM _IOWR('X', 121, struct fstrim_range) /* Trim */
+
+#define FS_IOC_GETFLAGS _IOR('f', 1, long)
+#define FS_IOC_SETFLAGS _IOW('f', 2, long)
+#define FS_IOC_GETVERSION _IOR('v', 1, long)
+#define FS_IOC_SETVERSION _IOW('v', 2, long)
+#define FS_IOC_FIEMAP _IOWR('f', 11, struct fiemap)
+#define FS_IOC32_GETFLAGS _IOR('f', 1, int)
+#define FS_IOC32_SETFLAGS _IOW('f', 2, int)
+#define FS_IOC32_GETVERSION _IOR('v', 1, int)
+#define FS_IOC32_SETVERSION _IOW('v', 2, int)
+
+/*
+ * Inode flags (FS_IOC_GETFLAGS / FS_IOC_SETFLAGS)
+ */
+#define FS_SECRM_FL 0x00000001 /* Secure deletion */
+#define FS_UNRM_FL 0x00000002 /* Undelete */
+#define FS_COMPR_FL 0x00000004 /* Compress file */
+#define FS_SYNC_FL 0x00000008 /* Synchronous updates */
+#define FS_IMMUTABLE_FL 0x00000010 /* Immutable file */
+#define FS_APPEND_FL 0x00000020 /* writes to file may only append */
+#define FS_NODUMP_FL 0x00000040 /* do not dump file */
+#define FS_NOATIME_FL 0x00000080 /* do not update atime */
+/* Reserved for compression usage... */
+#define FS_DIRTY_FL 0x00000100
+#define FS_COMPRBLK_FL 0x00000200 /* One or more compressed clusters */
+#define FS_NOCOMP_FL 0x00000400 /* Don't compress */
+#define FS_ECOMPR_FL 0x00000800 /* Compression error */
+/* End compression flags --- maybe not all used */
+#define FS_BTREE_FL 0x00001000 /* btree format dir */
+#define FS_INDEX_FL 0x00001000 /* hash-indexed directory */
+#define FS_IMAGIC_FL 0x00002000 /* AFS directory */
+#define FS_JOURNAL_DATA_FL 0x00004000 /* Reserved for ext3 */
+#define FS_NOTAIL_FL 0x00008000 /* file tail should not be merged */
+#define FS_DIRSYNC_FL 0x00010000 /* dirsync behaviour (directories only) */
+#define FS_TOPDIR_FL 0x00020000 /* Top of directory hierarchies*/
+#define FS_EXTENT_FL 0x00080000 /* Extents */
+#define FS_DIRECTIO_FL 0x00100000 /* Use direct i/o */
+#define FS_NOCOW_FL 0x00800000 /* Do not cow file */
+#define FS_RESERVED_FL 0x80000000 /* reserved for ext2 lib */
+
+#define FS_FL_USER_VISIBLE 0x0003DFFF /* User visible flags */
+#define FS_FL_USER_MODIFIABLE 0x000380FF /* User modifiable flags */
+
+
+#define SYNC_FILE_RANGE_WAIT_BEFORE 1
+#define SYNC_FILE_RANGE_WRITE 2
+#define SYNC_FILE_RANGE_WAIT_AFTER 4
+
+#endif /* _UAPI_LINUX_FS_H */
diff --git a/include/uapi/linux/fsl_hypervisor.h b/include/uapi/linux/fsl_hypervisor.h
new file mode 100644
index 0000000..1bf0496
--- /dev/null
+++ b/include/uapi/linux/fsl_hypervisor.h
@@ -0,0 +1,220 @@
+/*
+ * Freescale hypervisor ioctl and kernel interface
+ *
+ * Copyright (C) 2008-2011 Freescale Semiconductor, Inc.
+ * Author: Timur Tabi <timur@freescale.com>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * This software is provided by Freescale Semiconductor "as is" and any
+ * express or implied warranties, including, but not limited to, the implied
+ * warranties of merchantability and fitness for a particular purpose are
+ * disclaimed. In no event shall Freescale Semiconductor be liable for any
+ * direct, indirect, incidental, special, exemplary, or consequential damages
+ * (including, but not limited to, procurement of substitute goods or services;
+ * loss of use, data, or profits; or business interruption) however caused and
+ * on any theory of liability, whether in contract, strict liability, or tort
+ * (including negligence or otherwise) arising in any way out of the use of this
+ * software, even if advised of the possibility of such damage.
+ *
+ * This file is used by the Freescale hypervisor management driver. It can
+ * also be included by applications that need to communicate with the driver
+ * via the ioctl interface.
+ */
+
+#ifndef _UAPIFSL_HYPERVISOR_H
+#define _UAPIFSL_HYPERVISOR_H
+
+#include <linux/types.h>
+
+/**
+ * struct fsl_hv_ioctl_restart - restart a partition
+ * @ret: return error code from the hypervisor
+ * @partition: the ID of the partition to restart, or -1 for the
+ * calling partition
+ *
+ * Used by FSL_HV_IOCTL_PARTITION_RESTART
+ */
+struct fsl_hv_ioctl_restart {
+ __u32 ret;
+ __u32 partition;
+};
+
+/**
+ * struct fsl_hv_ioctl_status - get a partition's status
+ * @ret: return error code from the hypervisor
+ * @partition: the ID of the partition to query, or -1 for the
+ * calling partition
+ * @status: The returned status of the partition
+ *
+ * Used by FSL_HV_IOCTL_PARTITION_GET_STATUS
+ *
+ * Values of 'status':
+ * 0 = Stopped
+ * 1 = Running
+ * 2 = Starting
+ * 3 = Stopping
+ */
+struct fsl_hv_ioctl_status {
+ __u32 ret;
+ __u32 partition;
+ __u32 status;
+};
+
+/**
+ * struct fsl_hv_ioctl_start - start a partition
+ * @ret: return error code from the hypervisor
+ * @partition: the ID of the partition to control
+ * @entry_point: The offset within the guest IMA to start execution
+ * @load: If non-zero, reload the partition's images before starting
+ *
+ * Used by FSL_HV_IOCTL_PARTITION_START
+ */
+struct fsl_hv_ioctl_start {
+ __u32 ret;
+ __u32 partition;
+ __u32 entry_point;
+ __u32 load;
+};
+
+/**
+ * struct fsl_hv_ioctl_stop - stop a partition
+ * @ret: return error code from the hypervisor
+ * @partition: the ID of the partition to stop, or -1 for the calling
+ * partition
+ *
+ * Used by FSL_HV_IOCTL_PARTITION_STOP
+ */
+struct fsl_hv_ioctl_stop {
+ __u32 ret;
+ __u32 partition;
+};
+
+/**
+ * struct fsl_hv_ioctl_memcpy - copy memory between partitions
+ * @ret: return error code from the hypervisor
+ * @source: the partition ID of the source partition, or -1 for this
+ * partition
+ * @target: the partition ID of the target partition, or -1 for this
+ * partition
+ * @reserved: reserved, must be set to 0
+ * @local_addr: user-space virtual address of a buffer in the local
+ * partition
+ * @remote_addr: guest physical address of a buffer in the
+ * remote partition
+ * @count: the number of bytes to copy. Both the local and remote
+ * buffers must be at least 'count' bytes long
+ *
+ * Used by FSL_HV_IOCTL_MEMCPY
+ *
+ * The 'local' partition is the partition that calls this ioctl. The
+ * 'remote' partition is a different partition. The data is copied from
+ * the 'source' paritition' to the 'target' partition.
+ *
+ * The buffer in the remote partition must be guest physically
+ * contiguous.
+ *
+ * This ioctl does not support copying memory between two remote
+ * partitions or within the same partition, so either 'source' or
+ * 'target' (but not both) must be -1. In other words, either
+ *
+ * source == local and target == remote
+ * or
+ * source == remote and target == local
+ */
+struct fsl_hv_ioctl_memcpy {
+ __u32 ret;
+ __u32 source;
+ __u32 target;
+ __u32 reserved; /* padding to ensure local_vaddr is aligned */
+ __u64 local_vaddr;
+ __u64 remote_paddr;
+ __u64 count;
+};
+
+/**
+ * struct fsl_hv_ioctl_doorbell - ring a doorbell
+ * @ret: return error code from the hypervisor
+ * @doorbell: the handle of the doorbell to ring doorbell
+ *
+ * Used by FSL_HV_IOCTL_DOORBELL
+ */
+struct fsl_hv_ioctl_doorbell {
+ __u32 ret;
+ __u32 doorbell;
+};
+
+/**
+ * struct fsl_hv_ioctl_prop - get/set a device tree property
+ * @ret: return error code from the hypervisor
+ * @handle: handle of partition whose tree to access
+ * @path: virtual address of path name of node to access
+ * @propname: virtual address of name of property to access
+ * @propval: virtual address of property data buffer
+ * @proplen: Size of property data buffer
+ * @reserved: reserved, must be set to 0
+ *
+ * Used by FSL_HV_IOCTL_DOORBELL
+ */
+struct fsl_hv_ioctl_prop {
+ __u32 ret;
+ __u32 handle;
+ __u64 path;
+ __u64 propname;
+ __u64 propval;
+ __u32 proplen;
+ __u32 reserved; /* padding to ensure structure is aligned */
+};
+
+/* The ioctl type, documented in ioctl-number.txt */
+#define FSL_HV_IOCTL_TYPE 0xAF
+
+/* Restart another partition */
+#define FSL_HV_IOCTL_PARTITION_RESTART \
+ _IOWR(FSL_HV_IOCTL_TYPE, 1, struct fsl_hv_ioctl_restart)
+
+/* Get a partition's status */
+#define FSL_HV_IOCTL_PARTITION_GET_STATUS \
+ _IOWR(FSL_HV_IOCTL_TYPE, 2, struct fsl_hv_ioctl_status)
+
+/* Boot another partition */
+#define FSL_HV_IOCTL_PARTITION_START \
+ _IOWR(FSL_HV_IOCTL_TYPE, 3, struct fsl_hv_ioctl_start)
+
+/* Stop this or another partition */
+#define FSL_HV_IOCTL_PARTITION_STOP \
+ _IOWR(FSL_HV_IOCTL_TYPE, 4, struct fsl_hv_ioctl_stop)
+
+/* Copy data from one partition to another */
+#define FSL_HV_IOCTL_MEMCPY \
+ _IOWR(FSL_HV_IOCTL_TYPE, 5, struct fsl_hv_ioctl_memcpy)
+
+/* Ring a doorbell */
+#define FSL_HV_IOCTL_DOORBELL \
+ _IOWR(FSL_HV_IOCTL_TYPE, 6, struct fsl_hv_ioctl_doorbell)
+
+/* Get a property from another guest's device tree */
+#define FSL_HV_IOCTL_GETPROP \
+ _IOWR(FSL_HV_IOCTL_TYPE, 7, struct fsl_hv_ioctl_prop)
+
+/* Set a property in another guest's device tree */
+#define FSL_HV_IOCTL_SETPROP \
+ _IOWR(FSL_HV_IOCTL_TYPE, 8, struct fsl_hv_ioctl_prop)
+
+
+#endif /* _UAPIFSL_HYPERVISOR_H */
diff --git a/include/linux/fuse.h b/include/uapi/linux/fuse.h
similarity index 100%
rename from include/linux/fuse.h
rename to include/uapi/linux/fuse.h
diff --git a/include/uapi/linux/futex.h b/include/uapi/linux/futex.h
new file mode 100644
index 0000000..0b1f716
--- /dev/null
+++ b/include/uapi/linux/futex.h
@@ -0,0 +1,152 @@
+#ifndef _UAPI_LINUX_FUTEX_H
+#define _UAPI_LINUX_FUTEX_H
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+
+/* Second argument to futex syscall */
+
+
+#define FUTEX_WAIT 0
+#define FUTEX_WAKE 1
+#define FUTEX_FD 2
+#define FUTEX_REQUEUE 3
+#define FUTEX_CMP_REQUEUE 4
+#define FUTEX_WAKE_OP 5
+#define FUTEX_LOCK_PI 6
+#define FUTEX_UNLOCK_PI 7
+#define FUTEX_TRYLOCK_PI 8
+#define FUTEX_WAIT_BITSET 9
+#define FUTEX_WAKE_BITSET 10
+#define FUTEX_WAIT_REQUEUE_PI 11
+#define FUTEX_CMP_REQUEUE_PI 12
+
+#define FUTEX_PRIVATE_FLAG 128
+#define FUTEX_CLOCK_REALTIME 256
+#define FUTEX_CMD_MASK ~(FUTEX_PRIVATE_FLAG | FUTEX_CLOCK_REALTIME)
+
+#define FUTEX_WAIT_PRIVATE (FUTEX_WAIT | FUTEX_PRIVATE_FLAG)
+#define FUTEX_WAKE_PRIVATE (FUTEX_WAKE | FUTEX_PRIVATE_FLAG)
+#define FUTEX_REQUEUE_PRIVATE (FUTEX_REQUEUE | FUTEX_PRIVATE_FLAG)
+#define FUTEX_CMP_REQUEUE_PRIVATE (FUTEX_CMP_REQUEUE | FUTEX_PRIVATE_FLAG)
+#define FUTEX_WAKE_OP_PRIVATE (FUTEX_WAKE_OP | FUTEX_PRIVATE_FLAG)
+#define FUTEX_LOCK_PI_PRIVATE (FUTEX_LOCK_PI | FUTEX_PRIVATE_FLAG)
+#define FUTEX_UNLOCK_PI_PRIVATE (FUTEX_UNLOCK_PI | FUTEX_PRIVATE_FLAG)
+#define FUTEX_TRYLOCK_PI_PRIVATE (FUTEX_TRYLOCK_PI | FUTEX_PRIVATE_FLAG)
+#define FUTEX_WAIT_BITSET_PRIVATE (FUTEX_WAIT_BITSET | FUTEX_PRIVATE_FLAG)
+#define FUTEX_WAKE_BITSET_PRIVATE (FUTEX_WAKE_BITSET | FUTEX_PRIVATE_FLAG)
+#define FUTEX_WAIT_REQUEUE_PI_PRIVATE (FUTEX_WAIT_REQUEUE_PI | \
+ FUTEX_PRIVATE_FLAG)
+#define FUTEX_CMP_REQUEUE_PI_PRIVATE (FUTEX_CMP_REQUEUE_PI | \
+ FUTEX_PRIVATE_FLAG)
+
+/*
+ * Support for robust futexes: the kernel cleans up held futexes at
+ * thread exit time.
+ */
+
+/*
+ * Per-lock list entry - embedded in user-space locks, somewhere close
+ * to the futex field. (Note: user-space uses a double-linked list to
+ * achieve O(1) list add and remove, but the kernel only needs to know
+ * about the forward link)
+ *
+ * NOTE: this structure is part of the syscall ABI, and must not be
+ * changed.
+ */
+struct robust_list {
+ struct robust_list __user *next;
+};
+
+/*
+ * Per-thread list head:
+ *
+ * NOTE: this structure is part of the syscall ABI, and must only be
+ * changed if the change is first communicated with the glibc folks.
+ * (When an incompatible change is done, we'll increase the structure
+ * size, which glibc will detect)
+ */
+struct robust_list_head {
+ /*
+ * The head of the list. Points back to itself if empty:
+ */
+ struct robust_list list;
+
+ /*
+ * This relative offset is set by user-space, it gives the kernel
+ * the relative position of the futex field to examine. This way
+ * we keep userspace flexible, to freely shape its data-structure,
+ * without hardcoding any particular offset into the kernel:
+ */
+ long futex_offset;
+
+ /*
+ * The death of the thread may race with userspace setting
+ * up a lock's links. So to handle this race, userspace first
+ * sets this field to the address of the to-be-taken lock,
+ * then does the lock acquire, and then adds itself to the
+ * list, and then clears this field. Hence the kernel will
+ * always have full knowledge of all locks that the thread
+ * _might_ have taken. We check the owner TID in any case,
+ * so only truly owned locks will be handled.
+ */
+ struct robust_list __user *list_op_pending;
+};
+
+/*
+ * Are there any waiters for this robust futex:
+ */
+#define FUTEX_WAITERS 0x80000000
+
+/*
+ * The kernel signals via this bit that a thread holding a futex
+ * has exited without unlocking the futex. The kernel also does
+ * a FUTEX_WAKE on such futexes, after setting the bit, to wake
+ * up any possible waiters:
+ */
+#define FUTEX_OWNER_DIED 0x40000000
+
+/*
+ * The rest of the robust-futex field is for the TID:
+ */
+#define FUTEX_TID_MASK 0x3fffffff
+
+/*
+ * This limit protects against a deliberately circular list.
+ * (Not worth introducing an rlimit for it)
+ */
+#define ROBUST_LIST_LIMIT 2048
+
+/*
+ * bitset with all bits set for the FUTEX_xxx_BITSET OPs to request a
+ * match of any bit.
+ */
+#define FUTEX_BITSET_MATCH_ANY 0xffffffff
+
+
+#define FUTEX_OP_SET 0 /* *(int *)UADDR2 = OPARG; */
+#define FUTEX_OP_ADD 1 /* *(int *)UADDR2 += OPARG; */
+#define FUTEX_OP_OR 2 /* *(int *)UADDR2 |= OPARG; */
+#define FUTEX_OP_ANDN 3 /* *(int *)UADDR2 &= ~OPARG; */
+#define FUTEX_OP_XOR 4 /* *(int *)UADDR2 ^= OPARG; */
+
+#define FUTEX_OP_OPARG_SHIFT 8 /* Use (1 << OPARG) instead of OPARG. */
+
+#define FUTEX_OP_CMP_EQ 0 /* if (oldval == CMPARG) wake */
+#define FUTEX_OP_CMP_NE 1 /* if (oldval != CMPARG) wake */
+#define FUTEX_OP_CMP_LT 2 /* if (oldval < CMPARG) wake */
+#define FUTEX_OP_CMP_LE 3 /* if (oldval <= CMPARG) wake */
+#define FUTEX_OP_CMP_GT 4 /* if (oldval > CMPARG) wake */
+#define FUTEX_OP_CMP_GE 5 /* if (oldval >= CMPARG) wake */
+
+/* FUTEX_WAKE_OP will perform atomically
+ int oldval = *(int *)UADDR2;
+ *(int *)UADDR2 = oldval OP OPARG;
+ if (oldval CMP CMPARG)
+ wake UADDR2; */
+
+#define FUTEX_OP(op, oparg, cmp, cmparg) \
+ (((op & 0xf) << 28) | ((cmp & 0xf) << 24) \
+ | ((oparg & 0xfff) << 12) | (cmparg & 0xfff))
+
+#endif /* _UAPI_LINUX_FUTEX_H */
diff --git a/include/uapi/linux/gameport.h b/include/uapi/linux/gameport.h
new file mode 100644
index 0000000..49b29b0
--- /dev/null
+++ b/include/uapi/linux/gameport.h
@@ -0,0 +1,28 @@
+/*
+ * Copyright (c) 1999-2002 Vojtech Pavlik
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef _UAPI_GAMEPORT_H
+#define _UAPI_GAMEPORT_H
+
+
+
+#define GAMEPORT_MODE_DISABLED 0
+#define GAMEPORT_MODE_RAW 1
+#define GAMEPORT_MODE_COOKED 2
+
+#define GAMEPORT_ID_VENDOR_ANALOG 0x0001
+#define GAMEPORT_ID_VENDOR_MADCATZ 0x0002
+#define GAMEPORT_ID_VENDOR_LOGITECH 0x0003
+#define GAMEPORT_ID_VENDOR_CREATIVE 0x0004
+#define GAMEPORT_ID_VENDOR_GENIUS 0x0005
+#define GAMEPORT_ID_VENDOR_INTERACT 0x0006
+#define GAMEPORT_ID_VENDOR_MICROSOFT 0x0007
+#define GAMEPORT_ID_VENDOR_THRUSTMASTER 0x0008
+#define GAMEPORT_ID_VENDOR_GRAVIS 0x0009
+#define GAMEPORT_ID_VENDOR_GUILLEMOT 0x000a
+
+#endif /* _UAPI_GAMEPORT_H */
diff --git a/include/linux/gen_stats.h b/include/uapi/linux/gen_stats.h
similarity index 100%
rename from include/linux/gen_stats.h
rename to include/uapi/linux/gen_stats.h
diff --git a/include/uapi/linux/genetlink.h b/include/uapi/linux/genetlink.h
new file mode 100644
index 0000000..c880a41
--- /dev/null
+++ b/include/uapi/linux/genetlink.h
@@ -0,0 +1,84 @@
+#ifndef _UAPI__LINUX_GENERIC_NETLINK_H
+#define _UAPI__LINUX_GENERIC_NETLINK_H
+
+#include <linux/types.h>
+#include <linux/netlink.h>
+
+#define GENL_NAMSIZ 16 /* length of family name */
+
+#define GENL_MIN_ID NLMSG_MIN_TYPE
+#define GENL_MAX_ID 1023
+
+struct genlmsghdr {
+ __u8 cmd;
+ __u8 version;
+ __u16 reserved;
+};
+
+#define GENL_HDRLEN NLMSG_ALIGN(sizeof(struct genlmsghdr))
+
+#define GENL_ADMIN_PERM 0x01
+#define GENL_CMD_CAP_DO 0x02
+#define GENL_CMD_CAP_DUMP 0x04
+#define GENL_CMD_CAP_HASPOL 0x08
+
+/*
+ * List of reserved static generic netlink identifiers:
+ */
+#define GENL_ID_GENERATE 0
+#define GENL_ID_CTRL NLMSG_MIN_TYPE
+
+/**************************************************************************
+ * Controller
+ **************************************************************************/
+
+enum {
+ CTRL_CMD_UNSPEC,
+ CTRL_CMD_NEWFAMILY,
+ CTRL_CMD_DELFAMILY,
+ CTRL_CMD_GETFAMILY,
+ CTRL_CMD_NEWOPS,
+ CTRL_CMD_DELOPS,
+ CTRL_CMD_GETOPS,
+ CTRL_CMD_NEWMCAST_GRP,
+ CTRL_CMD_DELMCAST_GRP,
+ CTRL_CMD_GETMCAST_GRP, /* unused */
+ __CTRL_CMD_MAX,
+};
+
+#define CTRL_CMD_MAX (__CTRL_CMD_MAX - 1)
+
+enum {
+ CTRL_ATTR_UNSPEC,
+ CTRL_ATTR_FAMILY_ID,
+ CTRL_ATTR_FAMILY_NAME,
+ CTRL_ATTR_VERSION,
+ CTRL_ATTR_HDRSIZE,
+ CTRL_ATTR_MAXATTR,
+ CTRL_ATTR_OPS,
+ CTRL_ATTR_MCAST_GROUPS,
+ __CTRL_ATTR_MAX,
+};
+
+#define CTRL_ATTR_MAX (__CTRL_ATTR_MAX - 1)
+
+enum {
+ CTRL_ATTR_OP_UNSPEC,
+ CTRL_ATTR_OP_ID,
+ CTRL_ATTR_OP_FLAGS,
+ __CTRL_ATTR_OP_MAX,
+};
+
+#define CTRL_ATTR_OP_MAX (__CTRL_ATTR_OP_MAX - 1)
+
+enum {
+ CTRL_ATTR_MCAST_GRP_UNSPEC,
+ CTRL_ATTR_MCAST_GRP_NAME,
+ CTRL_ATTR_MCAST_GRP_ID,
+ __CTRL_ATTR_MCAST_GRP_MAX,
+};
+
+#define CTRL_ATTR_MCAST_GRP_MAX (__CTRL_ATTR_MCAST_GRP_MAX - 1)
+
+
+#endif /* _UAPI__LINUX_GENERIC_NETLINK_H */
diff --git a/include/linux/gfs2_ondisk.h b/include/uapi/linux/gfs2_ondisk.h
similarity index 100%
rename from include/linux/gfs2_ondisk.h
rename to include/uapi/linux/gfs2_ondisk.h
diff --git a/include/linux/gigaset_dev.h b/include/uapi/linux/gigaset_dev.h
similarity index 100%
rename from include/linux/gigaset_dev.h
rename to include/uapi/linux/gigaset_dev.h
diff --git a/include/uapi/linux/hdlc.h b/include/uapi/linux/hdlc.h
new file mode 100644
index 0000000..2c5f0af
--- /dev/null
+++ b/include/uapi/linux/hdlc.h
@@ -0,0 +1,23 @@
+/*
+ * Generic HDLC support routines for Linux
+ *
+ * Copyright (C) 1999-2005 Krzysztof Halasa <khc@pm.waw.pl>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License
+ * as published by the Free Software Foundation.
+ */
+
+#ifndef _UAPI__HDLC_H
+#define _UAPI__HDLC_H
+
+
+#define HDLC_MAX_MTU 1500 /* Ethernet 1500 bytes */
+#if 0
+#define HDLC_MAX_MRU (HDLC_MAX_MTU + 10 + 14 + 4) /* for ETH+VLAN over FR */
+#else
+#define HDLC_MAX_MRU 1600 /* as required for FR network */
+#endif
+
+
+#endif /* _UAPI__HDLC_H */
diff --git a/include/uapi/linux/hdlcdrv.h b/include/uapi/linux/hdlcdrv.h
new file mode 100644
index 0000000..ffc79c0
--- /dev/null
+++ b/include/uapi/linux/hdlcdrv.h
@@ -0,0 +1,110 @@
+/*
+ * hdlcdrv.h -- HDLC packet radio network driver.
+ * The Linux soundcard driver for 1200 baud and 9600 baud packet radio
+ * (C) 1996-1998 by Thomas Sailer, HB9JNX/AE4WA
+ */
+
+#ifndef _UAPI_HDLCDRV_H
+#define _UAPI_HDLCDRV_H
+
+/* -------------------------------------------------------------------- */
+/*
+ * structs for the IOCTL commands
+ */
+
+struct hdlcdrv_params {
+ int iobase;
+ int irq;
+ int dma;
+ int dma2;
+ int seriobase;
+ int pariobase;
+ int midiiobase;
+};
+
+struct hdlcdrv_channel_params {
+ int tx_delay; /* the transmitter keyup delay in 10ms units */
+ int tx_tail; /* the transmitter keyoff delay in 10ms units */
+ int slottime; /* the slottime in 10ms; usually 10 = 100ms */
+ int ppersist; /* the p-persistence 0..255 */
+ int fulldup; /* some driver do not support full duplex, setting */
+ /* this just makes them send even if DCD is on */
+};
+
+struct hdlcdrv_old_channel_state {
+ int ptt;
+ int dcd;
+ int ptt_keyed;
+};
+
+struct hdlcdrv_channel_state {
+ int ptt;
+ int dcd;
+ int ptt_keyed;
+ unsigned long tx_packets;
+ unsigned long tx_errors;
+ unsigned long rx_packets;
+ unsigned long rx_errors;
+};
+
+struct hdlcdrv_ioctl {
+ int cmd;
+ union {
+ struct hdlcdrv_params mp;
+ struct hdlcdrv_channel_params cp;
+ struct hdlcdrv_channel_state cs;
+ struct hdlcdrv_old_channel_state ocs;
+ unsigned int calibrate;
+ unsigned char bits;
+ char modename[128];
+ char drivername[32];
+ } data;
+};
+
+/* -------------------------------------------------------------------- */
+
+/*
+ * ioctl values
+ */
+#define HDLCDRVCTL_GETMODEMPAR 0
+#define HDLCDRVCTL_SETMODEMPAR 1
+#define HDLCDRVCTL_MODEMPARMASK 2 /* not handled by hdlcdrv */
+#define HDLCDRVCTL_GETCHANNELPAR 10
+#define HDLCDRVCTL_SETCHANNELPAR 11
+#define HDLCDRVCTL_OLDGETSTAT 20
+#define HDLCDRVCTL_CALIBRATE 21
+#define HDLCDRVCTL_GETSTAT 22
+
+/*
+ * these are mainly for debugging purposes
+ */
+#define HDLCDRVCTL_GETSAMPLES 30
+#define HDLCDRVCTL_GETBITS 31
+
+/*
+ * not handled by hdlcdrv, but by its depending drivers
+ */
+#define HDLCDRVCTL_GETMODE 40
+#define HDLCDRVCTL_SETMODE 41
+#define HDLCDRVCTL_MODELIST 42
+#define HDLCDRVCTL_DRIVERNAME 43
+
+/*
+ * mask of needed modem parameters, returned by HDLCDRVCTL_MODEMPARMASK
+ */
+#define HDLCDRV_PARMASK_IOBASE (1<<0)
+#define HDLCDRV_PARMASK_IRQ (1<<1)
+#define HDLCDRV_PARMASK_DMA (1<<2)
+#define HDLCDRV_PARMASK_DMA2 (1<<3)
+#define HDLCDRV_PARMASK_SERIOBASE (1<<4)
+#define HDLCDRV_PARMASK_PARIOBASE (1<<5)
+#define HDLCDRV_PARMASK_MIDIIOBASE (1<<6)
+
+/* -------------------------------------------------------------------- */
+
+
+/* -------------------------------------------------------------------- */
+
+#endif /* _UAPI_HDLCDRV_H */
+
+/* -------------------------------------------------------------------- */
diff --git a/include/linux/hdreg.h b/include/uapi/linux/hdreg.h
similarity index 100%
rename from include/linux/hdreg.h
rename to include/uapi/linux/hdreg.h
diff --git a/include/uapi/linux/hid.h b/include/uapi/linux/hid.h
new file mode 100644
index 0000000..b60f484
--- /dev/null
+++ b/include/uapi/linux/hid.h
@@ -0,0 +1,66 @@
+/*
+ * Copyright (c) 1999 Andreas Gal
+ * Copyright (c) 2000-2001 Vojtech Pavlik
+ * Copyright (c) 2006-2007 Jiri Kosina
+ */
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Should you need to contact me, the author, you can do so either by
+ * e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
+ * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
+ */
+#ifndef _UAPI__HID_H
+#define _UAPI__HID_H
+
+
+
+/*
+ * USB HID (Human Interface Device) interface class code
+ */
+
+#define USB_INTERFACE_CLASS_HID 3
+
+/*
+ * USB HID interface subclass and protocol codes
+ */
+
+#define USB_INTERFACE_SUBCLASS_BOOT 1
+#define USB_INTERFACE_PROTOCOL_KEYBOARD 1
+#define USB_INTERFACE_PROTOCOL_MOUSE 2
+
+/*
+ * HID class requests
+ */
+
+#define HID_REQ_GET_REPORT 0x01
+#define HID_REQ_GET_IDLE 0x02
+#define HID_REQ_GET_PROTOCOL 0x03
+#define HID_REQ_SET_REPORT 0x09
+#define HID_REQ_SET_IDLE 0x0A
+#define HID_REQ_SET_PROTOCOL 0x0B
+
+/*
+ * HID class descriptor types
+ */
+
+#define HID_DT_HID (USB_TYPE_CLASS | 0x01)
+#define HID_DT_REPORT (USB_TYPE_CLASS | 0x02)
+#define HID_DT_PHYSICAL (USB_TYPE_CLASS | 0x03)
+
+#define HID_MAX_DESCRIPTOR_SIZE 4096
+
+
+#endif /* _UAPI__HID_H */
diff --git a/include/uapi/linux/hiddev.h b/include/uapi/linux/hiddev.h
new file mode 100644
index 0000000..7df7884
--- /dev/null
+++ b/include/uapi/linux/hiddev.h
@@ -0,0 +1,212 @@
+/*
+ * Copyright (c) 1999-2000 Vojtech Pavlik
+ *
+ * Sponsored by SuSE
+ */
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Should you need to contact me, the author, you can do so either by
+ * e-mail - mail your message to <vojtech@suse.cz>, or by paper mail:
+ * Vojtech Pavlik, Ucitelska 1576, Prague 8, 182 00 Czech Republic
+ */
+#ifndef _UAPI_HIDDEV_H
+#define _UAPI_HIDDEV_H
+
+
+
+#include <linux/types.h>
+
+/*
+ * The event structure itself
+ */
+
+struct hiddev_event {
+ unsigned hid;
+ signed int value;
+};
+
+struct hiddev_devinfo {
+ __u32 bustype;
+ __u32 busnum;
+ __u32 devnum;
+ __u32 ifnum;
+ __s16 vendor;
+ __s16 product;
+ __s16 version;
+ __u32 num_applications;
+};
+
+struct hiddev_collection_info {
+ __u32 index;
+ __u32 type;
+ __u32 usage;
+ __u32 level;
+};
+
+#define HID_STRING_SIZE 256
+struct hiddev_string_descriptor {
+ __s32 index;
+ char value[HID_STRING_SIZE];
+};
+
+struct hiddev_report_info {
+ __u32 report_type;
+ __u32 report_id;
+ __u32 num_fields;
+};
+
+/* To do a GUSAGE/SUSAGE, fill in at least usage_code, report_type and
+ * report_id. Set report_id to REPORT_ID_UNKNOWN if the rest of the fields
+ * are unknown. Otherwise use a usage_ref struct filled in from a previous
+ * successful GUSAGE call to save time. To actually send a value to the
+ * device, perform a SUSAGE first, followed by a SREPORT. An INITREPORT or a
+ * GREPORT isn't necessary for a GUSAGE to return valid data.
+ */
+#define HID_REPORT_ID_UNKNOWN 0xffffffff
+#define HID_REPORT_ID_FIRST 0x00000100
+#define HID_REPORT_ID_NEXT 0x00000200
+#define HID_REPORT_ID_MASK 0x000000ff
+#define HID_REPORT_ID_MAX 0x000000ff
+
+#define HID_REPORT_TYPE_INPUT 1
+#define HID_REPORT_TYPE_OUTPUT 2
+#define HID_REPORT_TYPE_FEATURE 3
+#define HID_REPORT_TYPE_MIN 1
+#define HID_REPORT_TYPE_MAX 3
+
+struct hiddev_field_info {
+ __u32 report_type;
+ __u32 report_id;
+ __u32 field_index;
+ __u32 maxusage;
+ __u32 flags;
+ __u32 physical; /* physical usage for this field */
+ __u32 logical; /* logical usage for this field */
+ __u32 application; /* application usage for this field */
+ __s32 logical_minimum;
+ __s32 logical_maximum;
+ __s32 physical_minimum;
+ __s32 physical_maximum;
+ __u32 unit_exponent;
+ __u32 unit;
+};
+
+/* Fill in report_type, report_id and field_index to get the information on a
+ * field.
+ */
+#define HID_FIELD_CONSTANT 0x001
+#define HID_FIELD_VARIABLE 0x002
+#define HID_FIELD_RELATIVE 0x004
+#define HID_FIELD_WRAP 0x008
+#define HID_FIELD_NONLINEAR 0x010
+#define HID_FIELD_NO_PREFERRED 0x020
+#define HID_FIELD_NULL_STATE 0x040
+#define HID_FIELD_VOLATILE 0x080
+#define HID_FIELD_BUFFERED_BYTE 0x100
+
+struct hiddev_usage_ref {
+ __u32 report_type;
+ __u32 report_id;
+ __u32 field_index;
+ __u32 usage_index;
+ __u32 usage_code;
+ __s32 value;
+};
+
+/* hiddev_usage_ref_multi is used for sending multiple bytes to a control.
+ * It really manifests itself as setting the value of consecutive usages */
+#define HID_MAX_MULTI_USAGES 1024
+struct hiddev_usage_ref_multi {
+ struct hiddev_usage_ref uref;
+ __u32 num_values;
+ __s32 values[HID_MAX_MULTI_USAGES];
+};
+
+/* FIELD_INDEX_NONE is returned in read() data from the kernel when flags
+ * is set to (HIDDEV_FLAG_UREF | HIDDEV_FLAG_REPORT) and a new report has
+ * been sent by the device
+ */
+#define HID_FIELD_INDEX_NONE 0xffffffff
+
+/*
+ * Protocol version.
+ */
+
+#define HID_VERSION 0x010004
+
+/*
+ * IOCTLs (0x00 - 0x7f)
+ */
+
+#define HIDIOCGVERSION _IOR('H', 0x01, int)
+#define HIDIOCAPPLICATION _IO('H', 0x02)
+#define HIDIOCGDEVINFO _IOR('H', 0x03, struct hiddev_devinfo)
+#define HIDIOCGSTRING _IOR('H', 0x04, struct hiddev_string_descriptor)
+#define HIDIOCINITREPORT _IO('H', 0x05)
+#define HIDIOCGNAME(len) _IOC(_IOC_READ, 'H', 0x06, len)
+#define HIDIOCGREPORT _IOW('H', 0x07, struct hiddev_report_info)
+#define HIDIOCSREPORT _IOW('H', 0x08, struct hiddev_report_info)
+#define HIDIOCGREPORTINFO _IOWR('H', 0x09, struct hiddev_report_info)
+#define HIDIOCGFIELDINFO _IOWR('H', 0x0A, struct hiddev_field_info)
+#define HIDIOCGUSAGE _IOWR('H', 0x0B, struct hiddev_usage_ref)
+#define HIDIOCSUSAGE _IOW('H', 0x0C, struct hiddev_usage_ref)
+#define HIDIOCGUCODE _IOWR('H', 0x0D, struct hiddev_usage_ref)
+#define HIDIOCGFLAG _IOR('H', 0x0E, int)
+#define HIDIOCSFLAG _IOW('H', 0x0F, int)
+#define HIDIOCGCOLLECTIONINDEX _IOW('H', 0x10, struct hiddev_usage_ref)
+#define HIDIOCGCOLLECTIONINFO _IOWR('H', 0x11, struct hiddev_collection_info)
+#define HIDIOCGPHYS(len) _IOC(_IOC_READ, 'H', 0x12, len)
+
+/* For writing/reading to multiple/consecutive usages */
+#define HIDIOCGUSAGES _IOWR('H', 0x13, struct hiddev_usage_ref_multi)
+#define HIDIOCSUSAGES _IOW('H', 0x14, struct hiddev_usage_ref_multi)
+
+/*
+ * Flags to be used in HIDIOCSFLAG
+ */
+#define HIDDEV_FLAG_UREF 0x1
+#define HIDDEV_FLAG_REPORT 0x2
+#define HIDDEV_FLAGS 0x3
+
+/* To traverse the input report descriptor info for a HID device, perform the
+ * following:
+ *
+ * rinfo.report_type = HID_REPORT_TYPE_INPUT;
+ * rinfo.report_id = HID_REPORT_ID_FIRST;
+ * ret = ioctl(fd, HIDIOCGREPORTINFO, &rinfo);
+ *
+ * while (ret >= 0) {
+ * for (i = 0; i < rinfo.num_fields; i++) {
+ * finfo.report_type = rinfo.report_type;
+ * finfo.report_id = rinfo.report_id;
+ * finfo.field_index = i;
+ * ioctl(fd, HIDIOCGFIELDINFO, &finfo);
+ * for (j = 0; j < finfo.maxusage; j++) {
+ * uref.report_type = rinfo.report_type;
+ * uref.report_id = rinfo.report_id;
+ * uref.field_index = i;
+ * uref.usage_index = j;
+ * ioctl(fd, HIDIOCGUCODE, &uref);
+ * ioctl(fd, HIDIOCGUSAGE, &uref);
+ * }
+ * }
+ * rinfo.report_id |= HID_REPORT_ID_NEXT;
+ * ret = ioctl(fd, HIDIOCGREPORTINFO, &rinfo);
+ * }
+ */
+
+
+#endif /* _UAPI_HIDDEV_H */
diff --git a/include/uapi/linux/hidraw.h b/include/uapi/linux/hidraw.h
new file mode 100644
index 0000000..f5b7329
--- /dev/null
+++ b/include/uapi/linux/hidraw.h
@@ -0,0 +1,50 @@
+/*
+ * Copyright (c) 2007 Jiri Kosina
+ */
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+#ifndef _UAPI_HIDRAW_H
+#define _UAPI_HIDRAW_H
+
+
+
+#include <linux/hid.h>
+#include <linux/types.h>
+
+struct hidraw_report_descriptor {
+ __u32 size;
+ __u8 value[HID_MAX_DESCRIPTOR_SIZE];
+};
+
+struct hidraw_devinfo {
+ __u32 bustype;
+ __s16 vendor;
+ __s16 product;
+};
+
+/* ioctl interface */
+#define HIDIOCGRDESCSIZE _IOR('H', 0x01, int)
+#define HIDIOCGRDESC _IOR('H', 0x02, struct hidraw_report_descriptor)
+#define HIDIOCGRAWINFO _IOR('H', 0x03, struct hidraw_devinfo)
+#define HIDIOCGRAWNAME(len) _IOC(_IOC_READ, 'H', 0x04, len)
+#define HIDIOCGRAWPHYS(len) _IOC(_IOC_READ, 'H', 0x05, len)
+/* The first byte of SFEATURE and GFEATURE is the report number */
+#define HIDIOCSFEATURE(len) _IOC(_IOC_WRITE|_IOC_READ, 'H', 0x06, len)
+#define HIDIOCGFEATURE(len) _IOC(_IOC_WRITE|_IOC_READ, 'H', 0x07, len)
+
+#define HIDRAW_FIRST_MINOR 0
+#define HIDRAW_MAX_DEVICES 64
+/* number of reports to buffer */
+#define HIDRAW_BUFFER_SIZE 64
+
+
+/* kernel-only API declarations */
+
+#endif /* _UAPI_HIDRAW_H */
diff --git a/include/uapi/linux/hpet.h b/include/uapi/linux/hpet.h
new file mode 100644
index 0000000..8af3c70
--- /dev/null
+++ b/include/uapi/linux/hpet.h
@@ -0,0 +1,25 @@
+#ifndef _UAPI__HPET__
+#define _UAPI__HPET__
+
+#include <linux/compiler.h>
+
+
+struct hpet_info {
+ unsigned long hi_ireqfreq; /* Hz */
+ unsigned long hi_flags; /* information */
+ unsigned short hi_hpet;
+ unsigned short hi_timer;
+};
+
+#define HPET_INFO_PERIODIC 0x0010 /* periodic-capable comparator */
+
+#define HPET_IE_ON _IO('h', 0x01) /* interrupt on */
+#define HPET_IE_OFF _IO('h', 0x02) /* interrupt off */
+#define HPET_INFO _IOR('h', 0x03, struct hpet_info)
+#define HPET_EPI _IO('h', 0x04) /* enable periodic */
+#define HPET_DPI _IO('h', 0x05) /* disable periodic */
+#define HPET_IRQFREQ _IOW('h', 0x6, unsigned long) /* IRQFREQ usec */
+
+#define MAX_HPET_TBS 8 /* maximum hpet timer blocks */
+
+#endif /* _UAPI__HPET__ */
diff --git a/include/linux/hysdn_if.h b/include/uapi/linux/hysdn_if.h
similarity index 100%
rename from include/linux/hysdn_if.h
rename to include/uapi/linux/hysdn_if.h
diff --git a/include/uapi/linux/i2c-dev.h b/include/uapi/linux/i2c-dev.h
new file mode 100644
index 0000000..3f31155
--- /dev/null
+++ b/include/uapi/linux/i2c-dev.h
@@ -0,0 +1,72 @@
+/*
+ i2c-dev.h - i2c-bus driver, char device interface
+
+ Copyright (C) 1995-97 Simon G. Vogl
+ Copyright (C) 1998-99 Frodo Looijaard <frodol@dds.nl>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ MA 02110-1301 USA.
+*/
+
+#ifndef _UAPI_LINUX_I2C_DEV_H
+#define _UAPI_LINUX_I2C_DEV_H
+
+#include <linux/types.h>
+#include <linux/compiler.h>
+
+/* /dev/i2c-X ioctl commands. The ioctl's parameter is always an
+ * unsigned long, except for:
+ * - I2C_FUNCS, takes pointer to an unsigned long
+ * - I2C_RDWR, takes pointer to struct i2c_rdwr_ioctl_data
+ * - I2C_SMBUS, takes pointer to struct i2c_smbus_ioctl_data
+ */
+#define I2C_RETRIES 0x0701 /* number of times a device address should
+ be polled when not acknowledging */
+#define I2C_TIMEOUT 0x0702 /* set timeout in units of 10 ms */
+
+/* NOTE: Slave address is 7 or 10 bits, but 10-bit addresses
+ * are NOT supported! (due to code brokenness)
+ */
+#define I2C_SLAVE 0x0703 /* Use this slave address */
+#define I2C_SLAVE_FORCE 0x0706 /* Use this slave address, even if it
+ is already in use by a driver! */
+#define I2C_TENBIT 0x0704 /* 0 for 7 bit addrs, != 0 for 10 bit */
+
+#define I2C_FUNCS 0x0705 /* Get the adapter functionality mask */
+
+#define I2C_RDWR 0x0707 /* Combined R/W transfer (one STOP only) */
+
+#define I2C_PEC 0x0708 /* != 0 to use PEC with SMBus */
+#define I2C_SMBUS 0x0720 /* SMBus transfer */
+
+
+/* This is the structure as used in the I2C_SMBUS ioctl call */
+struct i2c_smbus_ioctl_data {
+ __u8 read_write;
+ __u8 command;
+ __u32 size;
+ union i2c_smbus_data __user *data;
+};
+
+/* This is the structure as used in the I2C_RDWR ioctl call */
+struct i2c_rdwr_ioctl_data {
+ struct i2c_msg __user *msgs; /* pointers to i2c_msgs */
+ __u32 nmsgs; /* number of i2c_msgs */
+};
+
+#define I2C_RDRW_IOCTL_MAX_MSGS 42
+
+
+#endif /* _UAPI_LINUX_I2C_DEV_H */
diff --git a/include/uapi/linux/i2c.h b/include/uapi/linux/i2c.h
new file mode 100644
index 0000000..0e949cb
--- /dev/null
+++ b/include/uapi/linux/i2c.h
@@ -0,0 +1,151 @@
+/* ------------------------------------------------------------------------- */
+/* */
+/* i2c.h - definitions for the i2c-bus interface */
+/* */
+/* ------------------------------------------------------------------------- */
+/* Copyright (C) 1995-2000 Simon G. Vogl
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ MA 02110-1301 USA. */
+/* ------------------------------------------------------------------------- */
+
+/* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and
+ Frodo Looijaard <frodol@dds.nl> */
+
+#ifndef _UAPI_LINUX_I2C_H
+#define _UAPI_LINUX_I2C_H
+
+#include <linux/types.h>
+
+/**
+ * struct i2c_msg - an I2C transaction segment beginning with START
+ * @addr: Slave address, either seven or ten bits. When this is a ten
+ * bit address, I2C_M_TEN must be set in @flags and the adapter
+ * must support I2C_FUNC_10BIT_ADDR.
+ * @flags: I2C_M_RD is handled by all adapters. No other flags may be
+ * provided unless the adapter exported the relevant I2C_FUNC_*
+ * flags through i2c_check_functionality().
+ * @len: Number of data bytes in @buf being read from or written to the
+ * I2C slave address. For read transactions where I2C_M_RECV_LEN
+ * is set, the caller guarantees that this buffer can hold up to
+ * 32 bytes in addition to the initial length byte sent by the
+ * slave (plus, if used, the SMBus PEC); and this value will be
+ * incremented by the number of block data bytes received.
+ * @buf: The buffer into which data is read, or from which it's written.
+ *
+ * An i2c_msg is the low level representation of one segment of an I2C
+ * transaction. It is visible to drivers in the @i2c_transfer() procedure,
+ * to userspace from i2c-dev, and to I2C adapter drivers through the
+ * @i2c_adapter.@master_xfer() method.
+ *
+ * Except when I2C "protocol mangling" is used, all I2C adapters implement
+ * the standard rules for I2C transactions. Each transaction begins with a
+ * START. That is followed by the slave address, and a bit encoding read
+ * versus write. Then follow all the data bytes, possibly including a byte
+ * with SMBus PEC. The transfer terminates with a NAK, or when all those
+ * bytes have been transferred and ACKed. If this is the last message in a
+ * group, it is followed by a STOP. Otherwise it is followed by the next
+ * @i2c_msg transaction segment, beginning with a (repeated) START.
+ *
+ * Alternatively, when the adapter supports I2C_FUNC_PROTOCOL_MANGLING then
+ * passing certain @flags may have changed those standard protocol behaviors.
+ * Those flags are only for use with broken/nonconforming slaves, and with
+ * adapters which are known to support the specific mangling options they
+ * need (one or more of IGNORE_NAK, NO_RD_ACK, NOSTART, and REV_DIR_ADDR).
+ */
+struct i2c_msg {
+ __u16 addr; /* slave address */
+ __u16 flags;
+#define I2C_M_TEN 0x0010 /* this is a ten bit chip address */
+#define I2C_M_RD 0x0001 /* read data, from slave to master */
+#define I2C_M_STOP 0x8000 /* if I2C_FUNC_PROTOCOL_MANGLING */
+#define I2C_M_NOSTART 0x4000 /* if I2C_FUNC_NOSTART */
+#define I2C_M_REV_DIR_ADDR 0x2000 /* if I2C_FUNC_PROTOCOL_MANGLING */
+#define I2C_M_IGNORE_NAK 0x1000 /* if I2C_FUNC_PROTOCOL_MANGLING */
+#define I2C_M_NO_RD_ACK 0x0800 /* if I2C_FUNC_PROTOCOL_MANGLING */
+#define I2C_M_RECV_LEN 0x0400 /* length will be first received byte */
+ __u16 len; /* msg length */
+ __u8 *buf; /* pointer to msg data */
+};
+
+/* To determine what functionality is present */
+
+#define I2C_FUNC_I2C 0x00000001
+#define I2C_FUNC_10BIT_ADDR 0x00000002
+#define I2C_FUNC_PROTOCOL_MANGLING 0x00000004 /* I2C_M_IGNORE_NAK etc. */
+#define I2C_FUNC_SMBUS_PEC 0x00000008
+#define I2C_FUNC_NOSTART 0x00000010 /* I2C_M_NOSTART */
+#define I2C_FUNC_SMBUS_BLOCK_PROC_CALL 0x00008000 /* SMBus 2.0 */
+#define I2C_FUNC_SMBUS_QUICK 0x00010000
+#define I2C_FUNC_SMBUS_READ_BYTE 0x00020000
+#define I2C_FUNC_SMBUS_WRITE_BYTE 0x00040000
+#define I2C_FUNC_SMBUS_READ_BYTE_DATA 0x00080000
+#define I2C_FUNC_SMBUS_WRITE_BYTE_DATA 0x00100000
+#define I2C_FUNC_SMBUS_READ_WORD_DATA 0x00200000
+#define I2C_FUNC_SMBUS_WRITE_WORD_DATA 0x00400000
+#define I2C_FUNC_SMBUS_PROC_CALL 0x00800000
+#define I2C_FUNC_SMBUS_READ_BLOCK_DATA 0x01000000
+#define I2C_FUNC_SMBUS_WRITE_BLOCK_DATA 0x02000000
+#define I2C_FUNC_SMBUS_READ_I2C_BLOCK 0x04000000 /* I2C-like block xfer */
+#define I2C_FUNC_SMBUS_WRITE_I2C_BLOCK 0x08000000 /* w/ 1-byte reg. addr. */
+
+#define I2C_FUNC_SMBUS_BYTE (I2C_FUNC_SMBUS_READ_BYTE | \
+ I2C_FUNC_SMBUS_WRITE_BYTE)
+#define I2C_FUNC_SMBUS_BYTE_DATA (I2C_FUNC_SMBUS_READ_BYTE_DATA | \
+ I2C_FUNC_SMBUS_WRITE_BYTE_DATA)
+#define I2C_FUNC_SMBUS_WORD_DATA (I2C_FUNC_SMBUS_READ_WORD_DATA | \
+ I2C_FUNC_SMBUS_WRITE_WORD_DATA)
+#define I2C_FUNC_SMBUS_BLOCK_DATA (I2C_FUNC_SMBUS_READ_BLOCK_DATA | \
+ I2C_FUNC_SMBUS_WRITE_BLOCK_DATA)
+#define I2C_FUNC_SMBUS_I2C_BLOCK (I2C_FUNC_SMBUS_READ_I2C_BLOCK | \
+ I2C_FUNC_SMBUS_WRITE_I2C_BLOCK)
+
+#define I2C_FUNC_SMBUS_EMUL (I2C_FUNC_SMBUS_QUICK | \
+ I2C_FUNC_SMBUS_BYTE | \
+ I2C_FUNC_SMBUS_BYTE_DATA | \
+ I2C_FUNC_SMBUS_WORD_DATA | \
+ I2C_FUNC_SMBUS_PROC_CALL | \
+ I2C_FUNC_SMBUS_WRITE_BLOCK_DATA | \
+ I2C_FUNC_SMBUS_I2C_BLOCK | \
+ I2C_FUNC_SMBUS_PEC)
+
+/*
+ * Data for SMBus Messages
+ */
+#define I2C_SMBUS_BLOCK_MAX 32 /* As specified in SMBus standard */
+union i2c_smbus_data {
+ __u8 byte;
+ __u16 word;
+ __u8 block[I2C_SMBUS_BLOCK_MAX + 2]; /* block[0] is used for length */
+ /* and one more for user-space compatibility */
+};
+
+/* i2c_smbus_xfer read or write markers */
+#define I2C_SMBUS_READ 1
+#define I2C_SMBUS_WRITE 0
+
+/* SMBus transaction types (size parameter in the above functions)
+ Note: these no longer correspond to the (arbitrary) PIIX4 internal codes! */
+#define I2C_SMBUS_QUICK 0
+#define I2C_SMBUS_BYTE 1
+#define I2C_SMBUS_BYTE_DATA 2
+#define I2C_SMBUS_WORD_DATA 3
+#define I2C_SMBUS_PROC_CALL 4
+#define I2C_SMBUS_BLOCK_DATA 5
+#define I2C_SMBUS_I2C_BLOCK_BROKEN 6
+#define I2C_SMBUS_BLOCK_PROC_CALL 7 /* SMBus 2.0 */
+#define I2C_SMBUS_I2C_BLOCK_DATA 8
+
+#endif /* _UAPI_LINUX_I2C_H */
diff --git a/include/linux/i2o-dev.h b/include/uapi/linux/i2o-dev.h
similarity index 100%
rename from include/linux/i2o-dev.h
rename to include/uapi/linux/i2o-dev.h
diff --git a/include/linux/i8k.h b/include/uapi/linux/i8k.h
similarity index 100%
rename from include/linux/i8k.h
rename to include/uapi/linux/i8k.h
diff --git a/include/uapi/linux/icmp.h b/include/uapi/linux/icmp.h
new file mode 100644
index 0000000..16fff05
--- /dev/null
+++ b/include/uapi/linux/icmp.h
@@ -0,0 +1,97 @@
+/*
+ * INET An implementation of the TCP/IP protocol suite for the LINUX
+ * operating system. INET is implemented using the BSD Socket
+ * interface as the means of communication with the user level.
+ *
+ * Definitions for the ICMP protocol.
+ *
+ * Version: @(#)icmp.h 1.0.3 04/28/93
+ *
+ * Author: Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _UAPI_LINUX_ICMP_H
+#define _UAPI_LINUX_ICMP_H
+
+#include <linux/types.h>
+
+#define ICMP_ECHOREPLY 0 /* Echo Reply */
+#define ICMP_DEST_UNREACH 3 /* Destination Unreachable */
+#define ICMP_SOURCE_QUENCH 4 /* Source Quench */
+#define ICMP_REDIRECT 5 /* Redirect (change route) */
+#define ICMP_ECHO 8 /* Echo Request */
+#define ICMP_TIME_EXCEEDED 11 /* Time Exceeded */
+#define ICMP_PARAMETERPROB 12 /* Parameter Problem */
+#define ICMP_TIMESTAMP 13 /* Timestamp Request */
+#define ICMP_TIMESTAMPREPLY 14 /* Timestamp Reply */
+#define ICMP_INFO_REQUEST 15 /* Information Request */
+#define ICMP_INFO_REPLY 16 /* Information Reply */
+#define ICMP_ADDRESS 17 /* Address Mask Request */
+#define ICMP_ADDRESSREPLY 18 /* Address Mask Reply */
+#define NR_ICMP_TYPES 18
+
+
+/* Codes for UNREACH. */
+#define ICMP_NET_UNREACH 0 /* Network Unreachable */
+#define ICMP_HOST_UNREACH 1 /* Host Unreachable */
+#define ICMP_PROT_UNREACH 2 /* Protocol Unreachable */
+#define ICMP_PORT_UNREACH 3 /* Port Unreachable */
+#define ICMP_FRAG_NEEDED 4 /* Fragmentation Needed/DF set */
+#define ICMP_SR_FAILED 5 /* Source Route failed */
+#define ICMP_NET_UNKNOWN 6
+#define ICMP_HOST_UNKNOWN 7
+#define ICMP_HOST_ISOLATED 8
+#define ICMP_NET_ANO 9
+#define ICMP_HOST_ANO 10
+#define ICMP_NET_UNR_TOS 11
+#define ICMP_HOST_UNR_TOS 12
+#define ICMP_PKT_FILTERED 13 /* Packet filtered */
+#define ICMP_PREC_VIOLATION 14 /* Precedence violation */
+#define ICMP_PREC_CUTOFF 15 /* Precedence cut off */
+#define NR_ICMP_UNREACH 15 /* instead of hardcoding immediate value */
+
+/* Codes for REDIRECT. */
+#define ICMP_REDIR_NET 0 /* Redirect Net */
+#define ICMP_REDIR_HOST 1 /* Redirect Host */
+#define ICMP_REDIR_NETTOS 2 /* Redirect Net for TOS */
+#define ICMP_REDIR_HOSTTOS 3 /* Redirect Host for TOS */
+
+/* Codes for TIME_EXCEEDED. */
+#define ICMP_EXC_TTL 0 /* TTL count exceeded */
+#define ICMP_EXC_FRAGTIME 1 /* Fragment Reass time exceeded */
+
+
+struct icmphdr {
+ __u8 type;
+ __u8 code;
+ __sum16 checksum;
+ union {
+ struct {
+ __be16 id;
+ __be16 sequence;
+ } echo;
+ __be32 gateway;
+ struct {
+ __be16 __unused;
+ __be16 mtu;
+ } frag;
+ } un;
+};
+
+
+/*
+ * constants for (set|get)sockopt
+ */
+
+#define ICMP_FILTER 1
+
+struct icmp_filter {
+ __u32 data;
+};
+
+
+#endif /* _UAPI_LINUX_ICMP_H */
diff --git a/include/uapi/linux/icmpv6.h b/include/uapi/linux/icmpv6.h
new file mode 100644
index 0000000..e0133c7
--- /dev/null
+++ b/include/uapi/linux/icmpv6.h
@@ -0,0 +1,164 @@
+#ifndef _UAPI_LINUX_ICMPV6_H
+#define _UAPI_LINUX_ICMPV6_H
+
+#include <linux/types.h>
+#include <asm/byteorder.h>
+
+struct icmp6hdr {
+
+ __u8 icmp6_type;
+ __u8 icmp6_code;
+ __sum16 icmp6_cksum;
+
+
+ union {
+ __be32 un_data32[1];
+ __be16 un_data16[2];
+ __u8 un_data8[4];
+
+ struct icmpv6_echo {
+ __be16 identifier;
+ __be16 sequence;
+ } u_echo;
+
+ struct icmpv6_nd_advt {
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+ __u32 reserved:5,
+ override:1,
+ solicited:1,
+ router:1,
+ reserved2:24;
+#elif defined(__BIG_ENDIAN_BITFIELD)
+ __u32 router:1,
+ solicited:1,
+ override:1,
+ reserved:29;
+#else
+#error "Please fix <asm/byteorder.h>"
+#endif
+ } u_nd_advt;
+
+ struct icmpv6_nd_ra {
+ __u8 hop_limit;
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+ __u8 reserved:3,
+ router_pref:2,
+ home_agent:1,
+ other:1,
+ managed:1;
+
+#elif defined(__BIG_ENDIAN_BITFIELD)
+ __u8 managed:1,
+ other:1,
+ home_agent:1,
+ router_pref:2,
+ reserved:3;
+#else
+#error "Please fix <asm/byteorder.h>"
+#endif
+ __be16 rt_lifetime;
+ } u_nd_ra;
+
+ } icmp6_dataun;
+
+#define icmp6_identifier icmp6_dataun.u_echo.identifier
+#define icmp6_sequence icmp6_dataun.u_echo.sequence
+#define icmp6_pointer icmp6_dataun.un_data32[0]
+#define icmp6_mtu icmp6_dataun.un_data32[0]
+#define icmp6_unused icmp6_dataun.un_data32[0]
+#define icmp6_maxdelay icmp6_dataun.un_data16[0]
+#define icmp6_router icmp6_dataun.u_nd_advt.router
+#define icmp6_solicited icmp6_dataun.u_nd_advt.solicited
+#define icmp6_override icmp6_dataun.u_nd_advt.override
+#define icmp6_ndiscreserved icmp6_dataun.u_nd_advt.reserved
+#define icmp6_hop_limit icmp6_dataun.u_nd_ra.hop_limit
+#define icmp6_addrconf_managed icmp6_dataun.u_nd_ra.managed
+#define icmp6_addrconf_other icmp6_dataun.u_nd_ra.other
+#define icmp6_rt_lifetime icmp6_dataun.u_nd_ra.rt_lifetime
+#define icmp6_router_pref icmp6_dataun.u_nd_ra.router_pref
+};
+
+
+#define ICMPV6_ROUTER_PREF_LOW 0x3
+#define ICMPV6_ROUTER_PREF_MEDIUM 0x0
+#define ICMPV6_ROUTER_PREF_HIGH 0x1
+#define ICMPV6_ROUTER_PREF_INVALID 0x2
+
+#define ICMPV6_DEST_UNREACH 1
+#define ICMPV6_PKT_TOOBIG 2
+#define ICMPV6_TIME_EXCEED 3
+#define ICMPV6_PARAMPROB 4
+
+#define ICMPV6_INFOMSG_MASK 0x80
+
+#define ICMPV6_ECHO_REQUEST 128
+#define ICMPV6_ECHO_REPLY 129
+#define ICMPV6_MGM_QUERY 130
+#define ICMPV6_MGM_REPORT 131
+#define ICMPV6_MGM_REDUCTION 132
+
+#define ICMPV6_NI_QUERY 139
+#define ICMPV6_NI_REPLY 140
+
+#define ICMPV6_MLD2_REPORT 143
+
+#define ICMPV6_DHAAD_REQUEST 144
+#define ICMPV6_DHAAD_REPLY 145
+#define ICMPV6_MOBILE_PREFIX_SOL 146
+#define ICMPV6_MOBILE_PREFIX_ADV 147
+
+/*
+ * Codes for Destination Unreachable
+ */
+#define ICMPV6_NOROUTE 0
+#define ICMPV6_ADM_PROHIBITED 1
+#define ICMPV6_NOT_NEIGHBOUR 2
+#define ICMPV6_ADDR_UNREACH 3
+#define ICMPV6_PORT_UNREACH 4
+
+/*
+ * Codes for Time Exceeded
+ */
+#define ICMPV6_EXC_HOPLIMIT 0
+#define ICMPV6_EXC_FRAGTIME 1
+
+/*
+ * Codes for Parameter Problem
+ */
+#define ICMPV6_HDR_FIELD 0
+#define ICMPV6_UNK_NEXTHDR 1
+#define ICMPV6_UNK_OPTION 2
+
+/*
+ * constants for (set|get)sockopt
+ */
+
+#define ICMPV6_FILTER 1
+
+/*
+ * ICMPV6 filter
+ */
+
+#define ICMPV6_FILTER_BLOCK 1
+#define ICMPV6_FILTER_PASS 2
+#define ICMPV6_FILTER_BLOCKOTHERS 3
+#define ICMPV6_FILTER_PASSONLY 4
+
+struct icmp6_filter {
+ __u32 data[8];
+};
+
+/*
+ * Definitions for MLDv2
+ */
+#define MLD2_MODE_IS_INCLUDE 1
+#define MLD2_MODE_IS_EXCLUDE 2
+#define MLD2_CHANGE_TO_INCLUDE 3
+#define MLD2_CHANGE_TO_EXCLUDE 4
+#define MLD2_ALLOW_NEW_SOURCES 5
+#define MLD2_BLOCK_OLD_SOURCES 6
+
+#define MLD2_ALL_MCR_INIT { { { 0xff,0x02,0,0,0,0,0,0,0,0,0,0,0,0,0,0x16 } } }
+
+
+#endif /* _UAPI_LINUX_ICMPV6_H */
diff --git a/include/linux/if.h b/include/uapi/linux/if.h
similarity index 100%
rename from include/linux/if.h
rename to include/uapi/linux/if.h
diff --git a/include/linux/if_addr.h b/include/uapi/linux/if_addr.h
similarity index 100%
rename from include/linux/if_addr.h
rename to include/uapi/linux/if_addr.h
diff --git a/include/linux/if_addrlabel.h b/include/uapi/linux/if_addrlabel.h
similarity index 100%
rename from include/linux/if_addrlabel.h
rename to include/uapi/linux/if_addrlabel.h
diff --git a/include/linux/if_alg.h b/include/uapi/linux/if_alg.h
similarity index 100%
rename from include/linux/if_alg.h
rename to include/uapi/linux/if_alg.h
diff --git a/include/linux/if_arcnet.h b/include/uapi/linux/if_arcnet.h
similarity index 100%
rename from include/linux/if_arcnet.h
rename to include/uapi/linux/if_arcnet.h
diff --git a/include/uapi/linux/if_arp.h b/include/uapi/linux/if_arp.h
new file mode 100644
index 0000000..82c7d1b
--- /dev/null
+++ b/include/uapi/linux/if_arp.h
@@ -0,0 +1,159 @@
+/*
+ * INET An implementation of the TCP/IP protocol suite for the LINUX
+ * operating system. INET is implemented using the BSD Socket
+ * interface as the means of communication with the user level.
+ *
+ * Global definitions for the ARP (RFC 826) protocol.
+ *
+ * Version: @(#)if_arp.h 1.0.1 04/16/93
+ *
+ * Authors: Original taken from Berkeley UNIX 4.3, (c) UCB 1986-1988
+ * Portions taken from the KA9Q/NOS (v2.00m PA0GRI) source.
+ * Ross Biro
+ * Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ * Florian La Roche,
+ * Jonathan Layes <layes@loran.com>
+ * Arnaldo Carvalho de Melo <acme@conectiva.com.br> ARPHRD_HWX25
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _UAPI_LINUX_IF_ARP_H
+#define _UAPI_LINUX_IF_ARP_H
+
+#include <linux/netdevice.h>
+
+/* ARP protocol HARDWARE identifiers. */
+#define ARPHRD_NETROM 0 /* from KA9Q: NET/ROM pseudo */
+#define ARPHRD_ETHER 1 /* Ethernet 10Mbps */
+#define ARPHRD_EETHER 2 /* Experimental Ethernet */
+#define ARPHRD_AX25 3 /* AX.25 Level 2 */
+#define ARPHRD_PRONET 4 /* PROnet token ring */
+#define ARPHRD_CHAOS 5 /* Chaosnet */
+#define ARPHRD_IEEE802 6 /* IEEE 802.2 Ethernet/TR/TB */
+#define ARPHRD_ARCNET 7 /* ARCnet */
+#define ARPHRD_APPLETLK 8 /* APPLEtalk */
+#define ARPHRD_DLCI 15 /* Frame Relay DLCI */
+#define ARPHRD_ATM 19 /* ATM */
+#define ARPHRD_METRICOM 23 /* Metricom STRIP (new IANA id) */
+#define ARPHRD_IEEE1394 24 /* IEEE 1394 IPv4 - RFC 2734 */
+#define ARPHRD_EUI64 27 /* EUI-64 */
+#define ARPHRD_INFINIBAND 32 /* InfiniBand */
+
+/* Dummy types for non ARP hardware */
+#define ARPHRD_SLIP 256
+#define ARPHRD_CSLIP 257
+#define ARPHRD_SLIP6 258
+#define ARPHRD_CSLIP6 259
+#define ARPHRD_RSRVD 260 /* Notional KISS type */
+#define ARPHRD_ADAPT 264
+#define ARPHRD_ROSE 270
+#define ARPHRD_X25 271 /* CCITT X.25 */
+#define ARPHRD_HWX25 272 /* Boards with X.25 in firmware */
+#define ARPHRD_CAN 280 /* Controller Area Network */
+#define ARPHRD_PPP 512
+#define ARPHRD_CISCO 513 /* Cisco HDLC */
+#define ARPHRD_HDLC ARPHRD_CISCO
+#define ARPHRD_LAPB 516 /* LAPB */
+#define ARPHRD_DDCMP 517 /* Digital's DDCMP protocol */
+#define ARPHRD_RAWHDLC 518 /* Raw HDLC */
+
+#define ARPHRD_TUNNEL 768 /* IPIP tunnel */
+#define ARPHRD_TUNNEL6 769 /* IP6IP6 tunnel */
+#define ARPHRD_FRAD 770 /* Frame Relay Access Device */
+#define ARPHRD_SKIP 771 /* SKIP vif */
+#define ARPHRD_LOOPBACK 772 /* Loopback device */
+#define ARPHRD_LOCALTLK 773 /* Localtalk device */
+#define ARPHRD_FDDI 774 /* Fiber Distributed Data Interface */
+#define ARPHRD_BIF 775 /* AP1000 BIF */
+#define ARPHRD_SIT 776 /* sit0 device - IPv6-in-IPv4 */
+#define ARPHRD_IPDDP 777 /* IP over DDP tunneller */
+#define ARPHRD_IPGRE 778 /* GRE over IP */
+#define ARPHRD_PIMREG 779 /* PIMSM register interface */
+#define ARPHRD_HIPPI 780 /* High Performance Parallel Interface */
+#define ARPHRD_ASH 781 /* Nexus 64Mbps Ash */
+#define ARPHRD_ECONET 782 /* Acorn Econet */
+#define ARPHRD_IRDA 783 /* Linux-IrDA */
+/* ARP works differently on different FC media .. so */
+#define ARPHRD_FCPP 784 /* Point to point fibrechannel */
+#define ARPHRD_FCAL 785 /* Fibrechannel arbitrated loop */
+#define ARPHRD_FCPL 786 /* Fibrechannel public loop */
+#define ARPHRD_FCFABRIC 787 /* Fibrechannel fabric */
+ /* 787->799 reserved for fibrechannel media types */
+#define ARPHRD_IEEE802_TR 800 /* Magic type ident for TR */
+#define ARPHRD_IEEE80211 801 /* IEEE 802.11 */
+#define ARPHRD_IEEE80211_PRISM 802 /* IEEE 802.11 + Prism2 header */
+#define ARPHRD_IEEE80211_RADIOTAP 803 /* IEEE 802.11 + radiotap header */
+#define ARPHRD_IEEE802154 804
+#define ARPHRD_IEEE802154_MONITOR 805 /* IEEE 802.15.4 network monitor */
+
+#define ARPHRD_PHONET 820 /* PhoNet media type */
+#define ARPHRD_PHONET_PIPE 821 /* PhoNet pipe header */
+#define ARPHRD_CAIF 822 /* CAIF media type */
+#define ARPHRD_IP6GRE 823 /* GRE over IPv6 */
+
+#define ARPHRD_VOID 0xFFFF /* Void type, nothing is known */
+#define ARPHRD_NONE 0xFFFE /* zero header length */
+
+/* ARP protocol opcodes. */
+#define ARPOP_REQUEST 1 /* ARP request */
+#define ARPOP_REPLY 2 /* ARP reply */
+#define ARPOP_RREQUEST 3 /* RARP request */
+#define ARPOP_RREPLY 4 /* RARP reply */
+#define ARPOP_InREQUEST 8 /* InARP request */
+#define ARPOP_InREPLY 9 /* InARP reply */
+#define ARPOP_NAK 10 /* (ATM)ARP NAK */
+
+
+/* ARP ioctl request. */
+struct arpreq {
+ struct sockaddr arp_pa; /* protocol address */
+ struct sockaddr arp_ha; /* hardware address */
+ int arp_flags; /* flags */
+ struct sockaddr arp_netmask; /* netmask (only for proxy arps) */
+ char arp_dev[16];
+};
+
+struct arpreq_old {
+ struct sockaddr arp_pa; /* protocol address */
+ struct sockaddr arp_ha; /* hardware address */
+ int arp_flags; /* flags */
+ struct sockaddr arp_netmask; /* netmask (only for proxy arps) */
+};
+
+/* ARP Flag values. */
+#define ATF_COM 0x02 /* completed entry (ha valid) */
+#define ATF_PERM 0x04 /* permanent entry */
+#define ATF_PUBL 0x08 /* publish entry */
+#define ATF_USETRAILERS 0x10 /* has requested trailers */
+#define ATF_NETMASK 0x20 /* want to use a netmask (only
+ for proxy entries) */
+#define ATF_DONTPUB 0x40 /* don't answer this addresses */
+
+/*
+ * This structure defines an ethernet arp header.
+ */
+
+struct arphdr {
+ __be16 ar_hrd; /* format of hardware address */
+ __be16 ar_pro; /* format of protocol address */
+ unsigned char ar_hln; /* length of hardware address */
+ unsigned char ar_pln; /* length of protocol address */
+ __be16 ar_op; /* ARP opcode (command) */
+
+#if 0
+ /*
+ * Ethernet looks like this : This bit is variable sized however...
+ */
+ unsigned char ar_sha[ETH_ALEN]; /* sender hardware address */
+ unsigned char ar_sip[4]; /* sender IP address */
+ unsigned char ar_tha[ETH_ALEN]; /* target hardware address */
+ unsigned char ar_tip[4]; /* target IP address */
+#endif
+
+};
+
+
+#endif /* _UAPI_LINUX_IF_ARP_H */
diff --git a/include/linux/if_bonding.h b/include/uapi/linux/if_bonding.h
similarity index 100%
rename from include/linux/if_bonding.h
rename to include/uapi/linux/if_bonding.h
diff --git a/include/uapi/linux/if_bridge.h b/include/uapi/linux/if_bridge.h
new file mode 100644
index 0000000..a8fe954
--- /dev/null
+++ b/include/uapi/linux/if_bridge.h
@@ -0,0 +1,101 @@
+/*
+ * Linux ethernet bridge
+ *
+ * Authors:
+ * Lennert Buytenhek <buytenh@gnu.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _UAPI_LINUX_IF_BRIDGE_H
+#define _UAPI_LINUX_IF_BRIDGE_H
+
+#include <linux/types.h>
+
+#define SYSFS_BRIDGE_ATTR "bridge"
+#define SYSFS_BRIDGE_FDB "brforward"
+#define SYSFS_BRIDGE_PORT_SUBDIR "brif"
+#define SYSFS_BRIDGE_PORT_ATTR "brport"
+#define SYSFS_BRIDGE_PORT_LINK "bridge"
+
+#define BRCTL_VERSION 1
+
+#define BRCTL_GET_VERSION 0
+#define BRCTL_GET_BRIDGES 1
+#define BRCTL_ADD_BRIDGE 2
+#define BRCTL_DEL_BRIDGE 3
+#define BRCTL_ADD_IF 4
+#define BRCTL_DEL_IF 5
+#define BRCTL_GET_BRIDGE_INFO 6
+#define BRCTL_GET_PORT_LIST 7
+#define BRCTL_SET_BRIDGE_FORWARD_DELAY 8
+#define BRCTL_SET_BRIDGE_HELLO_TIME 9
+#define BRCTL_SET_BRIDGE_MAX_AGE 10
+#define BRCTL_SET_AGEING_TIME 11
+#define BRCTL_SET_GC_INTERVAL 12
+#define BRCTL_GET_PORT_INFO 13
+#define BRCTL_SET_BRIDGE_STP_STATE 14
+#define BRCTL_SET_BRIDGE_PRIORITY 15
+#define BRCTL_SET_PORT_PRIORITY 16
+#define BRCTL_SET_PATH_COST 17
+#define BRCTL_GET_FDB_ENTRIES 18
+
+#define BR_STATE_DISABLED 0
+#define BR_STATE_LISTENING 1
+#define BR_STATE_LEARNING 2
+#define BR_STATE_FORWARDING 3
+#define BR_STATE_BLOCKING 4
+
+struct __bridge_info {
+ __u64 designated_root;
+ __u64 bridge_id;
+ __u32 root_path_cost;
+ __u32 max_age;
+ __u32 hello_time;
+ __u32 forward_delay;
+ __u32 bridge_max_age;
+ __u32 bridge_hello_time;
+ __u32 bridge_forward_delay;
+ __u8 topology_change;
+ __u8 topology_change_detected;
+ __u8 root_port;
+ __u8 stp_enabled;
+ __u32 ageing_time;
+ __u32 gc_interval;
+ __u32 hello_timer_value;
+ __u32 tcn_timer_value;
+ __u32 topology_change_timer_value;
+ __u32 gc_timer_value;
+};
+
+struct __port_info {
+ __u64 designated_root;
+ __u64 designated_bridge;
+ __u16 port_id;
+ __u16 designated_port;
+ __u32 path_cost;
+ __u32 designated_cost;
+ __u8 state;
+ __u8 top_change_ack;
+ __u8 config_pending;
+ __u8 unused0;
+ __u32 message_age_timer_value;
+ __u32 forward_delay_timer_value;
+ __u32 hold_timer_value;
+};
+
+struct __fdb_entry {
+ __u8 mac_addr[6];
+ __u8 port_no;
+ __u8 is_local;
+ __u32 ageing_timer_value;
+ __u8 port_hi;
+ __u8 pad0;
+ __u16 unused;
+};
+
+
+#endif /* _UAPI_LINUX_IF_BRIDGE_H */
diff --git a/include/linux/if_cablemodem.h b/include/uapi/linux/if_cablemodem.h
similarity index 100%
rename from include/linux/if_cablemodem.h
rename to include/uapi/linux/if_cablemodem.h
diff --git a/include/uapi/linux/if_eql.h b/include/uapi/linux/if_eql.h
new file mode 100644
index 0000000..06e818c
--- /dev/null
+++ b/include/uapi/linux/if_eql.h
@@ -0,0 +1,54 @@
+/*
+ * Equalizer Load-balancer for serial network interfaces.
+ *
+ * (c) Copyright 1995 Simon "Guru Aleph-Null" Janes
+ * NCM: Network and Communications Management, Inc.
+ *
+ *
+ * This software may be used and distributed according to the terms
+ * of the GNU General Public License, incorporated herein by reference.
+ *
+ * The author may be reached as simon@ncm.com, or C/O
+ * NCM
+ * Attn: Simon Janes
+ * 6803 Whittier Ave
+ * McLean VA 22101
+ * Phone: 1-703-847-0040 ext 103
+ */
+
+#ifndef _UAPI_LINUX_IF_EQL_H
+#define _UAPI_LINUX_IF_EQL_H
+
+#define EQL_DEFAULT_SLAVE_PRIORITY 28800
+#define EQL_DEFAULT_MAX_SLAVES 4
+#define EQL_DEFAULT_MTU 576
+#define EQL_DEFAULT_RESCHED_IVAL HZ
+
+#define EQL_ENSLAVE (SIOCDEVPRIVATE)
+#define EQL_EMANCIPATE (SIOCDEVPRIVATE + 1)
+
+#define EQL_GETSLAVECFG (SIOCDEVPRIVATE + 2)
+#define EQL_SETSLAVECFG (SIOCDEVPRIVATE + 3)
+
+#define EQL_GETMASTRCFG (SIOCDEVPRIVATE + 4)
+#define EQL_SETMASTRCFG (SIOCDEVPRIVATE + 5)
+
+
+typedef struct master_config {
+ char master_name[16];
+ int max_slaves;
+ int min_slaves;
+} master_config_t;
+
+typedef struct slave_config {
+ char slave_name[16];
+ long priority;
+} slave_config_t;
+
+typedef struct slaving_request {
+ char slave_name[16];
+ long priority;
+} slaving_request_t;
+
+
+#endif /* _UAPI_LINUX_IF_EQL_H */
diff --git a/include/uapi/linux/if_ether.h b/include/uapi/linux/if_ether.h
new file mode 100644
index 0000000..0343e1f
--- /dev/null
+++ b/include/uapi/linux/if_ether.h
@@ -0,0 +1,135 @@
+/*
+ * INET An implementation of the TCP/IP protocol suite for the LINUX
+ * operating system. INET is implemented using the BSD Socket
+ * interface as the means of communication with the user level.
+ *
+ * Global definitions for the Ethernet IEEE 802.3 interface.
+ *
+ * Version: @(#)if_ether.h 1.0.1a 02/08/94
+ *
+ * Author: Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ * Donald Becker, <becker@super.org>
+ * Alan Cox, <alan@lxorguk.ukuu.org.uk>
+ * Steve Whitehouse, <gw7rrm@eeshack3.swan.ac.uk>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _UAPI_LINUX_IF_ETHER_H
+#define _UAPI_LINUX_IF_ETHER_H
+
+#include <linux/types.h>
+
+/*
+ * IEEE 802.3 Ethernet magic constants. The frame sizes omit the preamble
+ * and FCS/CRC (frame check sequence).
+ */
+
+#define ETH_ALEN 6 /* Octets in one ethernet addr */
+#define ETH_HLEN 14 /* Total octets in header. */
+#define ETH_ZLEN 60 /* Min. octets in frame sans FCS */
+#define ETH_DATA_LEN 1500 /* Max. octets in payload */
+#define ETH_FRAME_LEN 1514 /* Max. octets in frame sans FCS */
+#define ETH_FCS_LEN 4 /* Octets in the FCS */
+
+/*
+ * These are the defined Ethernet Protocol ID's.
+ */
+
+#define ETH_P_LOOP 0x0060 /* Ethernet Loopback packet */
+#define ETH_P_PUP 0x0200 /* Xerox PUP packet */
+#define ETH_P_PUPAT 0x0201 /* Xerox PUP Addr Trans packet */
+#define ETH_P_IP 0x0800 /* Internet Protocol packet */
+#define ETH_P_X25 0x0805 /* CCITT X.25 */
+#define ETH_P_ARP 0x0806 /* Address Resolution packet */
+#define ETH_P_BPQ 0x08FF /* G8BPQ AX.25 Ethernet Packet [ NOT AN OFFICIALLY REGISTERED ID ] */
+#define ETH_P_IEEEPUP 0x0a00 /* Xerox IEEE802.3 PUP packet */
+#define ETH_P_IEEEPUPAT 0x0a01 /* Xerox IEEE802.3 PUP Addr Trans packet */
+#define ETH_P_DEC 0x6000 /* DEC Assigned proto */
+#define ETH_P_DNA_DL 0x6001 /* DEC DNA Dump/Load */
+#define ETH_P_DNA_RC 0x6002 /* DEC DNA Remote Console */
+#define ETH_P_DNA_RT 0x6003 /* DEC DNA Routing */
+#define ETH_P_LAT 0x6004 /* DEC LAT */
+#define ETH_P_DIAG 0x6005 /* DEC Diagnostics */
+#define ETH_P_CUST 0x6006 /* DEC Customer use */
+#define ETH_P_SCA 0x6007 /* DEC Systems Comms Arch */
+#define ETH_P_TEB 0x6558 /* Trans Ether Bridging */
+#define ETH_P_RARP 0x8035 /* Reverse Addr Res packet */
+#define ETH_P_ATALK 0x809B /* Appletalk DDP */
+#define ETH_P_AARP 0x80F3 /* Appletalk AARP */
+#define ETH_P_8021Q 0x8100 /* 802.1Q VLAN Extended Header */
+#define ETH_P_IPX 0x8137 /* IPX over DIX */
+#define ETH_P_IPV6 0x86DD /* IPv6 over bluebook */
+#define ETH_P_PAUSE 0x8808 /* IEEE Pause frames. See 802.3 31B */
+#define ETH_P_SLOW 0x8809 /* Slow Protocol. See 802.3ad 43B */
+#define ETH_P_WCCP 0x883E /* Web-cache coordination protocol
+ * defined in draft-wilson-wrec-wccp-v2-00.txt */
+#define ETH_P_PPP_DISC 0x8863 /* PPPoE discovery messages */
+#define ETH_P_PPP_SES 0x8864 /* PPPoE session messages */
+#define ETH_P_MPLS_UC 0x8847 /* MPLS Unicast traffic */
+#define ETH_P_MPLS_MC 0x8848 /* MPLS Multicast traffic */
+#define ETH_P_ATMMPOA 0x884c /* MultiProtocol Over ATM */
+#define ETH_P_LINK_CTL 0x886c /* HPNA, wlan link local tunnel */
+#define ETH_P_ATMFATE 0x8884 /* Frame-based ATM Transport
+ * over Ethernet
+ */
+#define ETH_P_PAE 0x888E /* Port Access Entity (IEEE 802.1X) */
+#define ETH_P_AOE 0x88A2 /* ATA over Ethernet */
+#define ETH_P_8021AD 0x88A8 /* 802.1ad Service VLAN */
+#define ETH_P_802_EX1 0x88B5 /* 802.1 Local Experimental 1. */
+#define ETH_P_TIPC 0x88CA /* TIPC */
+#define ETH_P_8021AH 0x88E7 /* 802.1ah Backbone Service Tag */
+#define ETH_P_1588 0x88F7 /* IEEE 1588 Timesync */
+#define ETH_P_FCOE 0x8906 /* Fibre Channel over Ethernet */
+#define ETH_P_TDLS 0x890D /* TDLS */
+#define ETH_P_FIP 0x8914 /* FCoE Initialization Protocol */
+#define ETH_P_QINQ1 0x9100 /* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */
+#define ETH_P_QINQ2 0x9200 /* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */
+#define ETH_P_QINQ3 0x9300 /* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */
+#define ETH_P_EDSA 0xDADA /* Ethertype DSA [ NOT AN OFFICIALLY REGISTERED ID ] */
+#define ETH_P_AF_IUCV 0xFBFB /* IBM af_iucv [ NOT AN OFFICIALLY REGISTERED ID ] */
+
+/*
+ * Non DIX types. Won't clash for 1500 types.
+ */
+
+#define ETH_P_802_3 0x0001 /* Dummy type for 802.3 frames */
+#define ETH_P_AX25 0x0002 /* Dummy protocol id for AX.25 */
+#define ETH_P_ALL 0x0003 /* Every packet (be careful!!!) */
+#define ETH_P_802_2 0x0004 /* 802.2 frames */
+#define ETH_P_SNAP 0x0005 /* Internal only */
+#define ETH_P_DDCMP 0x0006 /* DEC DDCMP: Internal only */
+#define ETH_P_WAN_PPP 0x0007 /* Dummy type for WAN PPP frames*/
+#define ETH_P_PPP_MP 0x0008 /* Dummy type for PPP MP frames */
+#define ETH_P_LOCALTALK 0x0009 /* Localtalk pseudo type */
+#define ETH_P_CAN 0x000C /* CAN: Controller Area Network */
+#define ETH_P_CANFD 0x000D /* CANFD: CAN flexible data rate*/
+#define ETH_P_PPPTALK 0x0010 /* Dummy type for Atalk over PPP*/
+#define ETH_P_TR_802_2 0x0011 /* 802.2 frames */
+#define ETH_P_MOBITEX 0x0015 /* Mobitex (kaz@cafe.net) */
+#define ETH_P_CONTROL 0x0016 /* Card specific control frames */
+#define ETH_P_IRDA 0x0017 /* Linux-IrDA */
+#define ETH_P_ECONET 0x0018 /* Acorn Econet */
+#define ETH_P_HDLC 0x0019 /* HDLC frames */
+#define ETH_P_ARCNET 0x001A /* 1A for ArcNet :-) */
+#define ETH_P_DSA 0x001B /* Distributed Switch Arch. */
+#define ETH_P_TRAILER 0x001C /* Trailer switch tagging */
+#define ETH_P_PHONET 0x00F5 /* Nokia Phonet frames */
+#define ETH_P_IEEE802154 0x00F6 /* IEEE802.15.4 frame */
+#define ETH_P_CAIF 0x00F7 /* ST-Ericsson CAIF protocol */
+
+/*
+ * This is an Ethernet frame header.
+ */
+
+struct ethhdr {
+ unsigned char h_dest[ETH_ALEN]; /* destination eth addr */
+ unsigned char h_source[ETH_ALEN]; /* source ether addr */
+ __be16 h_proto; /* packet type ID field */
+} __attribute__((packed));
+
+
+#endif /* _UAPI_LINUX_IF_ETHER_H */
diff --git a/include/linux/if_fc.h b/include/uapi/linux/if_fc.h
similarity index 100%
rename from include/linux/if_fc.h
rename to include/uapi/linux/if_fc.h
diff --git a/include/uapi/linux/if_fddi.h b/include/uapi/linux/if_fddi.h
new file mode 100644
index 0000000..0d36909
--- /dev/null
+++ b/include/uapi/linux/if_fddi.h
@@ -0,0 +1,104 @@
+/*
+ * INET An implementation of the TCP/IP protocol suite for the LINUX
+ * operating system. INET is implemented using the BSD Socket
+ * interface as the means of communication with the user level.
+ *
+ * Global definitions for the ANSI FDDI interface.
+ *
+ * Version: @(#)if_fddi.h 1.0.2 Sep 29 2004
+ *
+ * Author: Lawrence V. Stefani, <stefani@lkg.dec.com>
+ *
+ * if_fddi.h is based on previous if_ether.h and if_tr.h work by
+ * Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ * Donald Becker, <becker@super.org>
+ * Alan Cox, <alan@lxorguk.ukuu.org.uk>
+ * Steve Whitehouse, <gw7rrm@eeshack3.swan.ac.uk>
+ * Peter De Schrijver, <stud11@cc4.kuleuven.ac.be>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _UAPI_LINUX_IF_FDDI_H
+#define _UAPI_LINUX_IF_FDDI_H
+
+#include <linux/types.h>
+
+/*
+ * Define max and min legal sizes. The frame sizes do not include
+ * 4 byte FCS/CRC (frame check sequence).
+ */
+#define FDDI_K_ALEN 6 /* Octets in one FDDI address */
+#define FDDI_K_8022_HLEN 16 /* Total octets in 802.2 header */
+#define FDDI_K_SNAP_HLEN 21 /* Total octets in 802.2 SNAP header */
+#define FDDI_K_8022_ZLEN 16 /* Min octets in 802.2 frame sans FCS */
+#define FDDI_K_SNAP_ZLEN 21 /* Min octets in 802.2 SNAP frame sans FCS */
+#define FDDI_K_8022_DLEN 4475 /* Max octets in 802.2 payload */
+#define FDDI_K_SNAP_DLEN 4470 /* Max octets in 802.2 SNAP payload */
+#define FDDI_K_LLC_ZLEN 13 /* Min octets in LLC frame sans FCS */
+#define FDDI_K_LLC_LEN 4491 /* Max octets in LLC frame sans FCS */
+
+/* Define FDDI Frame Control (FC) Byte values */
+#define FDDI_FC_K_VOID 0x00
+#define FDDI_FC_K_NON_RESTRICTED_TOKEN 0x80
+#define FDDI_FC_K_RESTRICTED_TOKEN 0xC0
+#define FDDI_FC_K_SMT_MIN 0x41
+#define FDDI_FC_K_SMT_MAX 0x4F
+#define FDDI_FC_K_MAC_MIN 0xC1
+#define FDDI_FC_K_MAC_MAX 0xCF
+#define FDDI_FC_K_ASYNC_LLC_MIN 0x50
+#define FDDI_FC_K_ASYNC_LLC_DEF 0x54
+#define FDDI_FC_K_ASYNC_LLC_MAX 0x5F
+#define FDDI_FC_K_SYNC_LLC_MIN 0xD0
+#define FDDI_FC_K_SYNC_LLC_MAX 0xD7
+#define FDDI_FC_K_IMPLEMENTOR_MIN 0x60
+#define FDDI_FC_K_IMPLEMENTOR_MAX 0x6F
+#define FDDI_FC_K_RESERVED_MIN 0x70
+#define FDDI_FC_K_RESERVED_MAX 0x7F
+
+/* Define LLC and SNAP constants */
+#define FDDI_EXTENDED_SAP 0xAA
+#define FDDI_UI_CMD 0x03
+
+/* Define 802.2 Type 1 header */
+struct fddi_8022_1_hdr {
+ __u8 dsap; /* destination service access point */
+ __u8 ssap; /* source service access point */
+ __u8 ctrl; /* control byte #1 */
+} __attribute__((packed));
+
+/* Define 802.2 Type 2 header */
+struct fddi_8022_2_hdr {
+ __u8 dsap; /* destination service access point */
+ __u8 ssap; /* source service access point */
+ __u8 ctrl_1; /* control byte #1 */
+ __u8 ctrl_2; /* control byte #2 */
+} __attribute__((packed));
+
+/* Define 802.2 SNAP header */
+#define FDDI_K_OUI_LEN 3
+struct fddi_snap_hdr {
+ __u8 dsap; /* always 0xAA */
+ __u8 ssap; /* always 0xAA */
+ __u8 ctrl; /* always 0x03 */
+ __u8 oui[FDDI_K_OUI_LEN]; /* organizational universal id */
+ __be16 ethertype; /* packet type ID field */
+} __attribute__((packed));
+
+/* Define FDDI LLC frame header */
+struct fddihdr {
+ __u8 fc; /* frame control */
+ __u8 daddr[FDDI_K_ALEN]; /* destination address */
+ __u8 saddr[FDDI_K_ALEN]; /* source address */
+ union
+ {
+ struct fddi_8022_1_hdr llc_8022_1;
+ struct fddi_8022_2_hdr llc_8022_2;
+ struct fddi_snap_hdr llc_snap;
+ } hdr;
+} __attribute__((packed));
+
+
+#endif /* _UAPI_LINUX_IF_FDDI_H */
diff --git a/include/uapi/linux/if_frad.h b/include/uapi/linux/if_frad.h
new file mode 100644
index 0000000..f25b08d
--- /dev/null
+++ b/include/uapi/linux/if_frad.h
@@ -0,0 +1,122 @@
+/*
+ * DLCI/FRAD Definitions for Frame Relay Access Devices. DLCI devices are
+ * created for each DLCI associated with a FRAD. The FRAD driver
+ * is not truly a network device, but the lower level device
+ * handler. This allows other FRAD manufacturers to use the DLCI
+ * code, including its RFC1490 encapsulation alongside the current
+ * implementation for the Sangoma cards.
+ *
+ * Version: @(#)if_ifrad.h 0.15 31 Mar 96
+ *
+ * Author: Mike McLagan <mike.mclagan@linux.org>
+ *
+ * Changes:
+ * 0.15 Mike McLagan changed structure defs (packed)
+ * re-arranged flags
+ * added DLCI_RET vars
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _UAPI_FRAD_H_
+#define _UAPI_FRAD_H_
+
+#include <linux/if.h>
+
+/* Structures and constants associated with the DLCI device driver */
+
+struct dlci_add
+{
+ char devname[IFNAMSIZ];
+ short dlci;
+};
+
+#define DLCI_GET_CONF (SIOCDEVPRIVATE + 2)
+#define DLCI_SET_CONF (SIOCDEVPRIVATE + 3)
+
+/*
+ * These are related to the Sangoma SDLA and should remain in order.
+ * Code within the SDLA module is based on the specifics of this
+ * structure. Change at your own peril.
+ */
+struct dlci_conf {
+ short flags;
+ short CIR_fwd;
+ short Bc_fwd;
+ short Be_fwd;
+ short CIR_bwd;
+ short Bc_bwd;
+ short Be_bwd;
+
+/* these are part of the status read */
+ short Tc_fwd;
+ short Tc_bwd;
+ short Tf_max;
+ short Tb_max;
+
+/* add any new fields here above is a mirror of sdla_dlci_conf */
+};
+
+#define DLCI_GET_SLAVE (SIOCDEVPRIVATE + 4)
+
+/* configuration flags for DLCI */
+#define DLCI_IGNORE_CIR_OUT 0x0001
+#define DLCI_ACCOUNT_CIR_IN 0x0002
+#define DLCI_BUFFER_IF 0x0008
+
+#define DLCI_VALID_FLAGS 0x000B
+
+/* defines for the actual Frame Relay hardware */
+#define FRAD_GET_CONF (SIOCDEVPRIVATE)
+#define FRAD_SET_CONF (SIOCDEVPRIVATE + 1)
+
+#define FRAD_LAST_IOCTL FRAD_SET_CONF
+
+/*
+ * Based on the setup for the Sangoma SDLA. If changes are
+ * necessary to this structure, a routine will need to be
+ * added to that module to copy fields.
+ */
+struct frad_conf
+{
+ short station;
+ short flags;
+ short kbaud;
+ short clocking;
+ short mtu;
+ short T391;
+ short T392;
+ short N391;
+ short N392;
+ short N393;
+ short CIR_fwd;
+ short Bc_fwd;
+ short Be_fwd;
+ short CIR_bwd;
+ short Bc_bwd;
+ short Be_bwd;
+
+/* Add new fields here, above is a mirror of the sdla_conf */
+
+};
+
+#define FRAD_STATION_CPE 0x0000
+#define FRAD_STATION_NODE 0x0001
+
+#define FRAD_TX_IGNORE_CIR 0x0001
+#define FRAD_RX_ACCOUNT_CIR 0x0002
+#define FRAD_DROP_ABORTED 0x0004
+#define FRAD_BUFFERIF 0x0008
+#define FRAD_STATS 0x0010
+#define FRAD_MCI 0x0100
+#define FRAD_AUTODLCI 0x8000
+#define FRAD_VALID_FLAGS 0x811F
+
+#define FRAD_CLOCK_INT 0x0001
+#define FRAD_CLOCK_EXT 0x0000
+
+
+#endif /* _UAPI_FRAD_H_ */
diff --git a/include/linux/if_hippi.h b/include/uapi/linux/if_hippi.h
similarity index 100%
rename from include/linux/if_hippi.h
rename to include/uapi/linux/if_hippi.h
diff --git a/include/linux/if_infiniband.h b/include/uapi/linux/if_infiniband.h
similarity index 100%
rename from include/linux/if_infiniband.h
rename to include/uapi/linux/if_infiniband.h
diff --git a/include/uapi/linux/if_link.h b/include/uapi/linux/if_link.h
new file mode 100644
index 0000000..5c80cb1
--- /dev/null
+++ b/include/uapi/linux/if_link.h
@@ -0,0 +1,429 @@
+#ifndef _UAPI_LINUX_IF_LINK_H
+#define _UAPI_LINUX_IF_LINK_H
+
+#include <linux/types.h>
+#include <linux/netlink.h>
+
+/* This struct should be in sync with struct rtnl_link_stats64 */
+struct rtnl_link_stats {
+ __u32 rx_packets; /* total packets received */
+ __u32 tx_packets; /* total packets transmitted */
+ __u32 rx_bytes; /* total bytes received */
+ __u32 tx_bytes; /* total bytes transmitted */
+ __u32 rx_errors; /* bad packets received */
+ __u32 tx_errors; /* packet transmit problems */
+ __u32 rx_dropped; /* no space in linux buffers */
+ __u32 tx_dropped; /* no space available in linux */
+ __u32 multicast; /* multicast packets received */
+ __u32 collisions;
+
+ /* detailed rx_errors: */
+ __u32 rx_length_errors;
+ __u32 rx_over_errors; /* receiver ring buff overflow */
+ __u32 rx_crc_errors; /* recved pkt with crc error */
+ __u32 rx_frame_errors; /* recv'd frame alignment error */
+ __u32 rx_fifo_errors; /* recv'r fifo overrun */
+ __u32 rx_missed_errors; /* receiver missed packet */
+
+ /* detailed tx_errors */
+ __u32 tx_aborted_errors;
+ __u32 tx_carrier_errors;
+ __u32 tx_fifo_errors;
+ __u32 tx_heartbeat_errors;
+ __u32 tx_window_errors;
+
+ /* for cslip etc */
+ __u32 rx_compressed;
+ __u32 tx_compressed;
+};
+
+/* The main device statistics structure */
+struct rtnl_link_stats64 {
+ __u64 rx_packets; /* total packets received */
+ __u64 tx_packets; /* total packets transmitted */
+ __u64 rx_bytes; /* total bytes received */
+ __u64 tx_bytes; /* total bytes transmitted */
+ __u64 rx_errors; /* bad packets received */
+ __u64 tx_errors; /* packet transmit problems */
+ __u64 rx_dropped; /* no space in linux buffers */
+ __u64 tx_dropped; /* no space available in linux */
+ __u64 multicast; /* multicast packets received */
+ __u64 collisions;
+
+ /* detailed rx_errors: */
+ __u64 rx_length_errors;
+ __u64 rx_over_errors; /* receiver ring buff overflow */
+ __u64 rx_crc_errors; /* recved pkt with crc error */
+ __u64 rx_frame_errors; /* recv'd frame alignment error */
+ __u64 rx_fifo_errors; /* recv'r fifo overrun */
+ __u64 rx_missed_errors; /* receiver missed packet */
+
+ /* detailed tx_errors */
+ __u64 tx_aborted_errors;
+ __u64 tx_carrier_errors;
+ __u64 tx_fifo_errors;
+ __u64 tx_heartbeat_errors;
+ __u64 tx_window_errors;
+
+ /* for cslip etc */
+ __u64 rx_compressed;
+ __u64 tx_compressed;
+};
+
+/* The struct should be in sync with struct ifmap */
+struct rtnl_link_ifmap {
+ __u64 mem_start;
+ __u64 mem_end;
+ __u64 base_addr;
+ __u16 irq;
+ __u8 dma;
+ __u8 port;
+};
+
+/*
+ * IFLA_AF_SPEC
+ * Contains nested attributes for address family specific attributes.
+ * Each address family may create a attribute with the address family
+ * number as type and create its own attribute structure in it.
+ *
+ * Example:
+ * [IFLA_AF_SPEC] = {
+ * [AF_INET] = {
+ * [IFLA_INET_CONF] = ...,
+ * },
+ * [AF_INET6] = {
+ * [IFLA_INET6_FLAGS] = ...,
+ * [IFLA_INET6_CONF] = ...,
+ * }
+ * }
+ */
+
+enum {
+ IFLA_UNSPEC,
+ IFLA_ADDRESS,
+ IFLA_BROADCAST,
+ IFLA_IFNAME,
+ IFLA_MTU,
+ IFLA_LINK,
+ IFLA_QDISC,
+ IFLA_STATS,
+ IFLA_COST,
+#define IFLA_COST IFLA_COST
+ IFLA_PRIORITY,
+#define IFLA_PRIORITY IFLA_PRIORITY
+ IFLA_MASTER,
+#define IFLA_MASTER IFLA_MASTER
+ IFLA_WIRELESS, /* Wireless Extension event - see wireless.h */
+#define IFLA_WIRELESS IFLA_WIRELESS
+ IFLA_PROTINFO, /* Protocol specific information for a link */
+#define IFLA_PROTINFO IFLA_PROTINFO
+ IFLA_TXQLEN,
+#define IFLA_TXQLEN IFLA_TXQLEN
+ IFLA_MAP,
+#define IFLA_MAP IFLA_MAP
+ IFLA_WEIGHT,
+#define IFLA_WEIGHT IFLA_WEIGHT
+ IFLA_OPERSTATE,
+ IFLA_LINKMODE,
+ IFLA_LINKINFO,
+#define IFLA_LINKINFO IFLA_LINKINFO
+ IFLA_NET_NS_PID,
+ IFLA_IFALIAS,
+ IFLA_NUM_VF, /* Number of VFs if device is SR-IOV PF */
+ IFLA_VFINFO_LIST,
+ IFLA_STATS64,
+ IFLA_VF_PORTS,
+ IFLA_PORT_SELF,
+ IFLA_AF_SPEC,
+ IFLA_GROUP, /* Group the device belongs to */
+ IFLA_NET_NS_FD,
+ IFLA_EXT_MASK, /* Extended info mask, VFs, etc */
+ IFLA_PROMISCUITY, /* Promiscuity count: > 0 means acts PROMISC */
+#define IFLA_PROMISCUITY IFLA_PROMISCUITY
+ IFLA_NUM_TX_QUEUES,
+ IFLA_NUM_RX_QUEUES,
+ __IFLA_MAX
+};
+
+
+#define IFLA_MAX (__IFLA_MAX - 1)
+
+/* backwards compatibility for userspace */
+#ifndef __KERNEL__
+#define IFLA_RTA(r) ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct ifinfomsg))))
+#define IFLA_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct ifinfomsg))
+#endif
+
+enum {
+ IFLA_INET_UNSPEC,
+ IFLA_INET_CONF,
+ __IFLA_INET_MAX,
+};
+
+#define IFLA_INET_MAX (__IFLA_INET_MAX - 1)
+
+/* ifi_flags.
+
+ IFF_* flags.
+
+ The only change is:
+ IFF_LOOPBACK, IFF_BROADCAST and IFF_POINTOPOINT are
+ more not changeable by user. They describe link media
+ characteristics and set by device driver.
+
+ Comments:
+ - Combination IFF_BROADCAST|IFF_POINTOPOINT is invalid
+ - If neither of these three flags are set;
+ the interface is NBMA.
+
+ - IFF_MULTICAST does not mean anything special:
+ multicasts can be used on all not-NBMA links.
+ IFF_MULTICAST means that this media uses special encapsulation
+ for multicast frames. Apparently, all IFF_POINTOPOINT and
+ IFF_BROADCAST devices are able to use multicasts too.
+ */
+
+/* IFLA_LINK.
+ For usual devices it is equal ifi_index.
+ If it is a "virtual interface" (f.e. tunnel), ifi_link
+ can point to real physical interface (f.e. for bandwidth calculations),
+ or maybe 0, what means, that real media is unknown (usual
+ for IPIP tunnels, when route to endpoint is allowed to change)
+ */
+
+/* Subtype attributes for IFLA_PROTINFO */
+enum {
+ IFLA_INET6_UNSPEC,
+ IFLA_INET6_FLAGS, /* link flags */
+ IFLA_INET6_CONF, /* sysctl parameters */
+ IFLA_INET6_STATS, /* statistics */
+ IFLA_INET6_MCAST, /* MC things. What of them? */
+ IFLA_INET6_CACHEINFO, /* time values and max reasm size */
+ IFLA_INET6_ICMP6STATS, /* statistics (icmpv6) */
+ __IFLA_INET6_MAX
+};
+
+#define IFLA_INET6_MAX (__IFLA_INET6_MAX - 1)
+
+struct ifla_cacheinfo {
+ __u32 max_reasm_len;
+ __u32 tstamp; /* ipv6InterfaceTable updated timestamp */
+ __u32 reachable_time;
+ __u32 retrans_time;
+};
+
+enum {
+ IFLA_INFO_UNSPEC,
+ IFLA_INFO_KIND,
+ IFLA_INFO_DATA,
+ IFLA_INFO_XSTATS,
+ __IFLA_INFO_MAX,
+};
+
+#define IFLA_INFO_MAX (__IFLA_INFO_MAX - 1)
+
+/* VLAN section */
+
+enum {
+ IFLA_VLAN_UNSPEC,
+ IFLA_VLAN_ID,
+ IFLA_VLAN_FLAGS,
+ IFLA_VLAN_EGRESS_QOS,
+ IFLA_VLAN_INGRESS_QOS,
+ __IFLA_VLAN_MAX,
+};
+
+#define IFLA_VLAN_MAX (__IFLA_VLAN_MAX - 1)
+
+struct ifla_vlan_flags {
+ __u32 flags;
+ __u32 mask;
+};
+
+enum {
+ IFLA_VLAN_QOS_UNSPEC,
+ IFLA_VLAN_QOS_MAPPING,
+ __IFLA_VLAN_QOS_MAX
+};
+
+#define IFLA_VLAN_QOS_MAX (__IFLA_VLAN_QOS_MAX - 1)
+
+struct ifla_vlan_qos_mapping {
+ __u32 from;
+ __u32 to;
+};
+
+/* MACVLAN section */
+enum {
+ IFLA_MACVLAN_UNSPEC,
+ IFLA_MACVLAN_MODE,
+ IFLA_MACVLAN_FLAGS,
+ __IFLA_MACVLAN_MAX,
+};
+
+#define IFLA_MACVLAN_MAX (__IFLA_MACVLAN_MAX - 1)
+
+enum macvlan_mode {
+ MACVLAN_MODE_PRIVATE = 1, /* don't talk to other macvlans */
+ MACVLAN_MODE_VEPA = 2, /* talk to other ports through ext bridge */
+ MACVLAN_MODE_BRIDGE = 4, /* talk to bridge ports directly */
+ MACVLAN_MODE_PASSTHRU = 8,/* take over the underlying device */
+};
+
+#define MACVLAN_FLAG_NOPROMISC 1
+
+/* VXLAN section */
+enum {
+ IFLA_VXLAN_UNSPEC,
+ IFLA_VXLAN_ID,
+ IFLA_VXLAN_GROUP,
+ IFLA_VXLAN_LINK,
+ IFLA_VXLAN_LOCAL,
+ IFLA_VXLAN_TTL,
+ IFLA_VXLAN_TOS,
+ IFLA_VXLAN_LEARNING,
+ IFLA_VXLAN_AGEING,
+ IFLA_VXLAN_LIMIT,
+ IFLA_VXLAN_PORT_RANGE,
+ __IFLA_VXLAN_MAX
+};
+#define IFLA_VXLAN_MAX (__IFLA_VXLAN_MAX - 1)
+
+struct ifla_vxlan_port_range {
+ __be16 low;
+ __be16 high;
+};
+
+/* SR-IOV virtual function management section */
+
+enum {
+ IFLA_VF_INFO_UNSPEC,
+ IFLA_VF_INFO,
+ __IFLA_VF_INFO_MAX,
+};
+
+#define IFLA_VF_INFO_MAX (__IFLA_VF_INFO_MAX - 1)
+
+enum {
+ IFLA_VF_UNSPEC,
+ IFLA_VF_MAC, /* Hardware queue specific attributes */
+ IFLA_VF_VLAN,
+ IFLA_VF_TX_RATE, /* TX Bandwidth Allocation */
+ IFLA_VF_SPOOFCHK, /* Spoof Checking on/off switch */
+ __IFLA_VF_MAX,
+};
+
+#define IFLA_VF_MAX (__IFLA_VF_MAX - 1)
+
+struct ifla_vf_mac {
+ __u32 vf;
+ __u8 mac[32]; /* MAX_ADDR_LEN */
+};
+
+struct ifla_vf_vlan {
+ __u32 vf;
+ __u32 vlan; /* 0 - 4095, 0 disables VLAN filter */
+ __u32 qos;
+};
+
+struct ifla_vf_tx_rate {
+ __u32 vf;
+ __u32 rate; /* Max TX bandwidth in Mbps, 0 disables throttling */
+};
+
+struct ifla_vf_spoofchk {
+ __u32 vf;
+ __u32 setting;
+};
+
+/* VF ports management section
+ *
+ * Nested layout of set/get msg is:
+ *
+ * [IFLA_NUM_VF]
+ * [IFLA_VF_PORTS]
+ * [IFLA_VF_PORT]
+ * [IFLA_PORT_*], ...
+ * [IFLA_VF_PORT]
+ * [IFLA_PORT_*], ...
+ * ...
+ * [IFLA_PORT_SELF]
+ * [IFLA_PORT_*], ...
+ */
+
+enum {
+ IFLA_VF_PORT_UNSPEC,
+ IFLA_VF_PORT, /* nest */
+ __IFLA_VF_PORT_MAX,
+};
+
+#define IFLA_VF_PORT_MAX (__IFLA_VF_PORT_MAX - 1)
+
+enum {
+ IFLA_PORT_UNSPEC,
+ IFLA_PORT_VF, /* __u32 */
+ IFLA_PORT_PROFILE, /* string */
+ IFLA_PORT_VSI_TYPE, /* 802.1Qbg (pre-)standard VDP */
+ IFLA_PORT_INSTANCE_UUID, /* binary UUID */
+ IFLA_PORT_HOST_UUID, /* binary UUID */
+ IFLA_PORT_REQUEST, /* __u8 */
+ IFLA_PORT_RESPONSE, /* __u16, output only */
+ __IFLA_PORT_MAX,
+};
+
+#define IFLA_PORT_MAX (__IFLA_PORT_MAX - 1)
+
+#define PORT_PROFILE_MAX 40
+#define PORT_UUID_MAX 16
+#define PORT_SELF_VF -1
+
+enum {
+ PORT_REQUEST_PREASSOCIATE = 0,
+ PORT_REQUEST_PREASSOCIATE_RR,
+ PORT_REQUEST_ASSOCIATE,
+ PORT_REQUEST_DISASSOCIATE,
+};
+
+enum {
+ PORT_VDP_RESPONSE_SUCCESS = 0,
+ PORT_VDP_RESPONSE_INVALID_FORMAT,
+ PORT_VDP_RESPONSE_INSUFFICIENT_RESOURCES,
+ PORT_VDP_RESPONSE_UNUSED_VTID,
+ PORT_VDP_RESPONSE_VTID_VIOLATION,
+ PORT_VDP_RESPONSE_VTID_VERSION_VIOALTION,
+ PORT_VDP_RESPONSE_OUT_OF_SYNC,
+ /* 0x08-0xFF reserved for future VDP use */
+ PORT_PROFILE_RESPONSE_SUCCESS = 0x100,
+ PORT_PROFILE_RESPONSE_INPROGRESS,
+ PORT_PROFILE_RESPONSE_INVALID,
+ PORT_PROFILE_RESPONSE_BADSTATE,
+ PORT_PROFILE_RESPONSE_INSUFFICIENT_RESOURCES,
+ PORT_PROFILE_RESPONSE_ERROR,
+};
+
+struct ifla_port_vsi {
+ __u8 vsi_mgr_id;
+ __u8 vsi_type_id[3];
+ __u8 vsi_type_version;
+ __u8 pad[3];
+};
+
+
+/* IPoIB section */
+
+enum {
+ IFLA_IPOIB_UNSPEC,
+ IFLA_IPOIB_PKEY,
+ IFLA_IPOIB_MODE,
+ IFLA_IPOIB_UMCAST,
+ __IFLA_IPOIB_MAX
+};
+
+enum {
+ IPOIB_MODE_DATAGRAM = 0, /* using unreliable datagram QPs */
+ IPOIB_MODE_CONNECTED = 1, /* using connected QPs */
+};
+
+#define IFLA_IPOIB_MAX (__IFLA_IPOIB_MAX - 1)
+
+#endif /* _UAPI_LINUX_IF_LINK_H */
diff --git a/include/uapi/linux/if_ltalk.h b/include/uapi/linux/if_ltalk.h
new file mode 100644
index 0000000..b92c1fb
--- /dev/null
+++ b/include/uapi/linux/if_ltalk.h
@@ -0,0 +1,9 @@
+#ifndef _UAPI__LINUX_LTALK_H
+#define _UAPI__LINUX_LTALK_H
+
+#define LTALK_HLEN 1
+#define LTALK_MTU 600
+#define LTALK_ALEN 1
+
+
+#endif /* _UAPI__LINUX_LTALK_H */
diff --git a/include/linux/if_packet.h b/include/uapi/linux/if_packet.h
similarity index 100%
rename from include/linux/if_packet.h
rename to include/uapi/linux/if_packet.h
diff --git a/include/uapi/linux/if_phonet.h b/include/uapi/linux/if_phonet.h
new file mode 100644
index 0000000..f7ad9e2
--- /dev/null
+++ b/include/uapi/linux/if_phonet.h
@@ -0,0 +1,16 @@
+/*
+ * File: if_phonet.h
+ *
+ * Phonet interface kernel definitions
+ *
+ * Copyright (C) 2008 Nokia Corporation. All rights reserved.
+ */
+#ifndef _UAPILINUX_IF_PHONET_H
+#define _UAPILINUX_IF_PHONET_H
+
+#define PHONET_MIN_MTU 6 /* pn_length = 0 */
+#define PHONET_MAX_MTU 65541 /* pn_length = 0xffff */
+#define PHONET_DEV_MTU PHONET_MAX_MTU
+
+
+#endif /* _UAPILINUX_IF_PHONET_H */
diff --git a/include/linux/if_plip.h b/include/uapi/linux/if_plip.h
similarity index 100%
rename from include/linux/if_plip.h
rename to include/uapi/linux/if_plip.h
diff --git a/include/linux/if_ppp.h b/include/uapi/linux/if_ppp.h
similarity index 100%
rename from include/linux/if_ppp.h
rename to include/uapi/linux/if_ppp.h
diff --git a/include/uapi/linux/if_pppol2tp.h b/include/uapi/linux/if_pppol2tp.h
new file mode 100644
index 0000000..163e8ad
--- /dev/null
+++ b/include/uapi/linux/if_pppol2tp.h
@@ -0,0 +1,104 @@
+/***************************************************************************
+ * Linux PPP over L2TP (PPPoL2TP) Socket Implementation (RFC 2661)
+ *
+ * This file supplies definitions required by the PPP over L2TP driver
+ * (l2tp_ppp.c). All version information wrt this file is located in l2tp_ppp.c
+ *
+ * License:
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+
+#ifndef _UAPI__LINUX_IF_PPPOL2TP_H
+#define _UAPI__LINUX_IF_PPPOL2TP_H
+
+#include <linux/types.h>
+
+
+/* Structure used to connect() the socket to a particular tunnel UDP
+ * socket over IPv4.
+ */
+struct pppol2tp_addr {
+ __kernel_pid_t pid; /* pid that owns the fd.
+ * 0 => current */
+ int fd; /* FD of UDP socket to use */
+
+ struct sockaddr_in addr; /* IP address and port to send to */
+
+ __u16 s_tunnel, s_session; /* For matching incoming packets */
+ __u16 d_tunnel, d_session; /* For sending outgoing packets */
+};
+
+/* Structure used to connect() the socket to a particular tunnel UDP
+ * socket over IPv6.
+ */
+struct pppol2tpin6_addr {
+ __kernel_pid_t pid; /* pid that owns the fd.
+ * 0 => current */
+ int fd; /* FD of UDP socket to use */
+
+ __u16 s_tunnel, s_session; /* For matching incoming packets */
+ __u16 d_tunnel, d_session; /* For sending outgoing packets */
+
+ struct sockaddr_in6 addr; /* IP address and port to send to */
+};
+
+/* The L2TPv3 protocol changes tunnel and session ids from 16 to 32
+ * bits. So we need a different sockaddr structure.
+ */
+struct pppol2tpv3_addr {
+ __kernel_pid_t pid; /* pid that owns the fd.
+ * 0 => current */
+ int fd; /* FD of UDP or IP socket to use */
+
+ struct sockaddr_in addr; /* IP address and port to send to */
+
+ __u32 s_tunnel, s_session; /* For matching incoming packets */
+ __u32 d_tunnel, d_session; /* For sending outgoing packets */
+};
+
+struct pppol2tpv3in6_addr {
+ __kernel_pid_t pid; /* pid that owns the fd.
+ * 0 => current */
+ int fd; /* FD of UDP or IP socket to use */
+
+ __u32 s_tunnel, s_session; /* For matching incoming packets */
+ __u32 d_tunnel, d_session; /* For sending outgoing packets */
+
+ struct sockaddr_in6 addr; /* IP address and port to send to */
+};
+
+/* Socket options:
+ * DEBUG - bitmask of debug message categories
+ * SENDSEQ - 0 => don't send packets with sequence numbers
+ * 1 => send packets with sequence numbers
+ * RECVSEQ - 0 => receive packet sequence numbers are optional
+ * 1 => drop receive packets without sequence numbers
+ * LNSMODE - 0 => act as LAC.
+ * 1 => act as LNS.
+ * REORDERTO - reorder timeout (in millisecs). If 0, don't try to reorder.
+ */
+enum {
+ PPPOL2TP_SO_DEBUG = 1,
+ PPPOL2TP_SO_RECVSEQ = 2,
+ PPPOL2TP_SO_SENDSEQ = 3,
+ PPPOL2TP_SO_LNSMODE = 4,
+ PPPOL2TP_SO_REORDERTO = 5,
+};
+
+/* Debug message categories for the DEBUG socket option */
+enum {
+ PPPOL2TP_MSG_DEBUG = (1 << 0), /* verbose debug (if
+ * compiled in) */
+ PPPOL2TP_MSG_CONTROL = (1 << 1), /* userspace - kernel
+ * interface */
+ PPPOL2TP_MSG_SEQ = (1 << 2), /* sequence numbers */
+ PPPOL2TP_MSG_DATA = (1 << 3), /* data packets */
+};
+
+
+
+#endif /* _UAPI__LINUX_IF_PPPOL2TP_H */
diff --git a/include/uapi/linux/if_pppox.h b/include/uapi/linux/if_pppox.h
new file mode 100644
index 0000000..0b46fd5
--- /dev/null
+++ b/include/uapi/linux/if_pppox.h
@@ -0,0 +1,156 @@
+/***************************************************************************
+ * Linux PPP over X - Generic PPP transport layer sockets
+ * Linux PPP over Ethernet (PPPoE) Socket Implementation (RFC 2516)
+ *
+ * This file supplies definitions required by the PPP over Ethernet driver
+ * (pppox.c). All version information wrt this file is located in pppox.c
+ *
+ * License:
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+
+#ifndef _UAPI__LINUX_IF_PPPOX_H
+#define _UAPI__LINUX_IF_PPPOX_H
+
+
+#include <linux/types.h>
+#include <asm/byteorder.h>
+
+#include <linux/socket.h>
+#include <linux/if_ether.h>
+#include <linux/if_pppol2tp.h>
+
+/* For user-space programs to pick up these definitions
+ * which they wouldn't get otherwise without defining __KERNEL__
+ */
+#ifndef AF_PPPOX
+#define AF_PPPOX 24
+#define PF_PPPOX AF_PPPOX
+#endif /* !(AF_PPPOX) */
+
+/************************************************************************
+ * PPPoE addressing definition
+ */
+typedef __be16 sid_t;
+struct pppoe_addr {
+ sid_t sid; /* Session identifier */
+ unsigned char remote[ETH_ALEN]; /* Remote address */
+ char dev[IFNAMSIZ]; /* Local device to use */
+};
+
+/************************************************************************
+ * PPTP addressing definition
+ */
+struct pptp_addr {
+ __be16 call_id;
+ struct in_addr sin_addr;
+};
+
+/************************************************************************
+ * Protocols supported by AF_PPPOX
+ */
+#define PX_PROTO_OE 0 /* Currently just PPPoE */
+#define PX_PROTO_OL2TP 1 /* Now L2TP also */
+#define PX_PROTO_PPTP 2
+#define PX_MAX_PROTO 3
+
+struct sockaddr_pppox {
+ __kernel_sa_family_t sa_family; /* address family, AF_PPPOX */
+ unsigned int sa_protocol; /* protocol identifier */
+ union {
+ struct pppoe_addr pppoe;
+ struct pptp_addr pptp;
+ } sa_addr;
+} __packed;
+
+/* The use of the above union isn't viable because the size of this
+ * struct must stay fixed over time -- applications use sizeof(struct
+ * sockaddr_pppox) to fill it. We use a protocol specific sockaddr
+ * type instead.
+ */
+struct sockaddr_pppol2tp {
+ __kernel_sa_family_t sa_family; /* address family, AF_PPPOX */
+ unsigned int sa_protocol; /* protocol identifier */
+ struct pppol2tp_addr pppol2tp;
+} __packed;
+
+struct sockaddr_pppol2tpin6 {
+ __kernel_sa_family_t sa_family; /* address family, AF_PPPOX */
+ unsigned int sa_protocol; /* protocol identifier */
+ struct pppol2tpin6_addr pppol2tp;
+} __packed;
+
+/* The L2TPv3 protocol changes tunnel and session ids from 16 to 32
+ * bits. So we need a different sockaddr structure.
+ */
+struct sockaddr_pppol2tpv3 {
+ __kernel_sa_family_t sa_family; /* address family, AF_PPPOX */
+ unsigned int sa_protocol; /* protocol identifier */
+ struct pppol2tpv3_addr pppol2tp;
+} __packed;
+
+struct sockaddr_pppol2tpv3in6 {
+ __kernel_sa_family_t sa_family; /* address family, AF_PPPOX */
+ unsigned int sa_protocol; /* protocol identifier */
+ struct pppol2tpv3in6_addr pppol2tp;
+} __packed;
+
+/*********************************************************************
+ *
+ * ioctl interface for defining forwarding of connections
+ *
+ ********************************************************************/
+
+#define PPPOEIOCSFWD _IOW(0xB1 ,0, size_t)
+#define PPPOEIOCDFWD _IO(0xB1 ,1)
+/*#define PPPOEIOCGFWD _IOWR(0xB1,2, size_t)*/
+
+/* Codes to identify message types */
+#define PADI_CODE 0x09
+#define PADO_CODE 0x07
+#define PADR_CODE 0x19
+#define PADS_CODE 0x65
+#define PADT_CODE 0xa7
+struct pppoe_tag {
+ __be16 tag_type;
+ __be16 tag_len;
+ char tag_data[0];
+} __attribute__ ((packed));
+
+/* Tag identifiers */
+#define PTT_EOL __cpu_to_be16(0x0000)
+#define PTT_SRV_NAME __cpu_to_be16(0x0101)
+#define PTT_AC_NAME __cpu_to_be16(0x0102)
+#define PTT_HOST_UNIQ __cpu_to_be16(0x0103)
+#define PTT_AC_COOKIE __cpu_to_be16(0x0104)
+#define PTT_VENDOR __cpu_to_be16(0x0105)
+#define PTT_RELAY_SID __cpu_to_be16(0x0110)
+#define PTT_SRV_ERR __cpu_to_be16(0x0201)
+#define PTT_SYS_ERR __cpu_to_be16(0x0202)
+#define PTT_GEN_ERR __cpu_to_be16(0x0203)
+
+struct pppoe_hdr {
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+ __u8 ver : 4;
+ __u8 type : 4;
+#elif defined(__BIG_ENDIAN_BITFIELD)
+ __u8 type : 4;
+ __u8 ver : 4;
+#else
+#error "Please fix <asm/byteorder.h>"
+#endif
+ __u8 code;
+ __be16 sid;
+ __be16 length;
+ struct pppoe_tag tag[0];
+} __packed;
+
+/* Length of entire PPPoE + PPP header */
+#define PPPOE_SES_HLEN 8
+
+
+#endif /* _UAPI__LINUX_IF_PPPOX_H */
diff --git a/include/linux/if_slip.h b/include/uapi/linux/if_slip.h
similarity index 100%
rename from include/linux/if_slip.h
rename to include/uapi/linux/if_slip.h
diff --git a/include/uapi/linux/if_team.h b/include/uapi/linux/if_team.h
new file mode 100644
index 0000000..7b8fa33
--- /dev/null
+++ b/include/uapi/linux/if_team.h
@@ -0,0 +1,107 @@
+/*
+ * include/linux/if_team.h - Network team device driver header
+ * Copyright (c) 2011 Jiri Pirko <jpirko@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef _UAPI_LINUX_IF_TEAM_H_
+#define _UAPI_LINUX_IF_TEAM_H_
+
+
+#define TEAM_STRING_MAX_LEN 32
+
+/**********************************
+ * NETLINK_GENERIC netlink family.
+ **********************************/
+
+enum {
+ TEAM_CMD_NOOP,
+ TEAM_CMD_OPTIONS_SET,
+ TEAM_CMD_OPTIONS_GET,
+ TEAM_CMD_PORT_LIST_GET,
+
+ __TEAM_CMD_MAX,
+ TEAM_CMD_MAX = (__TEAM_CMD_MAX - 1),
+};
+
+enum {
+ TEAM_ATTR_UNSPEC,
+ TEAM_ATTR_TEAM_IFINDEX, /* u32 */
+ TEAM_ATTR_LIST_OPTION, /* nest */
+ TEAM_ATTR_LIST_PORT, /* nest */
+
+ __TEAM_ATTR_MAX,
+ TEAM_ATTR_MAX = __TEAM_ATTR_MAX - 1,
+};
+
+/* Nested layout of get/set msg:
+ *
+ * [TEAM_ATTR_LIST_OPTION]
+ * [TEAM_ATTR_ITEM_OPTION]
+ * [TEAM_ATTR_OPTION_*], ...
+ * [TEAM_ATTR_ITEM_OPTION]
+ * [TEAM_ATTR_OPTION_*], ...
+ * ...
+ * [TEAM_ATTR_LIST_PORT]
+ * [TEAM_ATTR_ITEM_PORT]
+ * [TEAM_ATTR_PORT_*], ...
+ * [TEAM_ATTR_ITEM_PORT]
+ * [TEAM_ATTR_PORT_*], ...
+ * ...
+ */
+
+enum {
+ TEAM_ATTR_ITEM_OPTION_UNSPEC,
+ TEAM_ATTR_ITEM_OPTION, /* nest */
+
+ __TEAM_ATTR_ITEM_OPTION_MAX,
+ TEAM_ATTR_ITEM_OPTION_MAX = __TEAM_ATTR_ITEM_OPTION_MAX - 1,
+};
+
+enum {
+ TEAM_ATTR_OPTION_UNSPEC,
+ TEAM_ATTR_OPTION_NAME, /* string */
+ TEAM_ATTR_OPTION_CHANGED, /* flag */
+ TEAM_ATTR_OPTION_TYPE, /* u8 */
+ TEAM_ATTR_OPTION_DATA, /* dynamic */
+ TEAM_ATTR_OPTION_REMOVED, /* flag */
+ TEAM_ATTR_OPTION_PORT_IFINDEX, /* u32 */ /* for per-port options */
+ TEAM_ATTR_OPTION_ARRAY_INDEX, /* u32 */ /* for array options */
+
+ __TEAM_ATTR_OPTION_MAX,
+ TEAM_ATTR_OPTION_MAX = __TEAM_ATTR_OPTION_MAX - 1,
+};
+
+enum {
+ TEAM_ATTR_ITEM_PORT_UNSPEC,
+ TEAM_ATTR_ITEM_PORT, /* nest */
+
+ __TEAM_ATTR_ITEM_PORT_MAX,
+ TEAM_ATTR_ITEM_PORT_MAX = __TEAM_ATTR_ITEM_PORT_MAX - 1,
+};
+
+enum {
+ TEAM_ATTR_PORT_UNSPEC,
+ TEAM_ATTR_PORT_IFINDEX, /* u32 */
+ TEAM_ATTR_PORT_CHANGED, /* flag */
+ TEAM_ATTR_PORT_LINKUP, /* flag */
+ TEAM_ATTR_PORT_SPEED, /* u32 */
+ TEAM_ATTR_PORT_DUPLEX, /* u8 */
+ TEAM_ATTR_PORT_REMOVED, /* flag */
+
+ __TEAM_ATTR_PORT_MAX,
+ TEAM_ATTR_PORT_MAX = __TEAM_ATTR_PORT_MAX - 1,
+};
+
+/*
+ * NETLINK_GENERIC related info
+ */
+#define TEAM_GENL_NAME "team"
+#define TEAM_GENL_VERSION 0x1
+#define TEAM_GENL_CHANGE_EVENT_MC_GRP_NAME "change_event"
+
+#endif /* _UAPI_LINUX_IF_TEAM_H_ */
diff --git a/include/uapi/linux/if_tun.h b/include/uapi/linux/if_tun.h
new file mode 100644
index 0000000..25a585c
--- /dev/null
+++ b/include/uapi/linux/if_tun.h
@@ -0,0 +1,94 @@
+/*
+ * Universal TUN/TAP device driver.
+ * Copyright (C) 1999-2000 Maxim Krasnyansky <max_mk@yahoo.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _UAPI__IF_TUN_H
+#define _UAPI__IF_TUN_H
+
+#include <linux/types.h>
+#include <linux/if_ether.h>
+#include <linux/filter.h>
+
+/* Read queue size */
+#define TUN_READQ_SIZE 500
+
+/* TUN device flags */
+#define TUN_TUN_DEV 0x0001
+#define TUN_TAP_DEV 0x0002
+#define TUN_TYPE_MASK 0x000f
+
+#define TUN_FASYNC 0x0010
+#define TUN_NOCHECKSUM 0x0020
+#define TUN_NO_PI 0x0040
+#define TUN_ONE_QUEUE 0x0080
+#define TUN_PERSIST 0x0100
+#define TUN_VNET_HDR 0x0200
+
+/* Ioctl defines */
+#define TUNSETNOCSUM _IOW('T', 200, int)
+#define TUNSETDEBUG _IOW('T', 201, int)
+#define TUNSETIFF _IOW('T', 202, int)
+#define TUNSETPERSIST _IOW('T', 203, int)
+#define TUNSETOWNER _IOW('T', 204, int)
+#define TUNSETLINK _IOW('T', 205, int)
+#define TUNSETGROUP _IOW('T', 206, int)
+#define TUNGETFEATURES _IOR('T', 207, unsigned int)
+#define TUNSETOFFLOAD _IOW('T', 208, unsigned int)
+#define TUNSETTXFILTER _IOW('T', 209, unsigned int)
+#define TUNGETIFF _IOR('T', 210, unsigned int)
+#define TUNGETSNDBUF _IOR('T', 211, int)
+#define TUNSETSNDBUF _IOW('T', 212, int)
+#define TUNATTACHFILTER _IOW('T', 213, struct sock_fprog)
+#define TUNDETACHFILTER _IOW('T', 214, struct sock_fprog)
+#define TUNGETVNETHDRSZ _IOR('T', 215, int)
+#define TUNSETVNETHDRSZ _IOW('T', 216, int)
+
+/* TUNSETIFF ifr flags */
+#define IFF_TUN 0x0001
+#define IFF_TAP 0x0002
+#define IFF_NO_PI 0x1000
+#define IFF_ONE_QUEUE 0x2000
+#define IFF_VNET_HDR 0x4000
+#define IFF_TUN_EXCL 0x8000
+
+/* Features for GSO (TUNSETOFFLOAD). */
+#define TUN_F_CSUM 0x01 /* You can hand me unchecksummed packets. */
+#define TUN_F_TSO4 0x02 /* I can handle TSO for IPv4 packets */
+#define TUN_F_TSO6 0x04 /* I can handle TSO for IPv6 packets */
+#define TUN_F_TSO_ECN 0x08 /* I can handle TSO with ECN bits. */
+#define TUN_F_UFO 0x10 /* I can handle UFO packets */
+
+/* Protocol info prepended to the packets (when IFF_NO_PI is not set) */
+#define TUN_PKT_STRIP 0x0001
+struct tun_pi {
+ __u16 flags;
+ __be16 proto;
+};
+
+/*
+ * Filter spec (used for SETXXFILTER ioctls)
+ * This stuff is applicable only to the TAP (Ethernet) devices.
+ * If the count is zero the filter is disabled and the driver accepts
+ * all packets (promisc mode).
+ * If the filter is enabled in order to accept broadcast packets
+ * broadcast addr must be explicitly included in the addr list.
+ */
+#define TUN_FLT_ALLMULTI 0x0001 /* Accept all multicast packets */
+struct tun_filter {
+ __u16 flags; /* TUN_FLT_ flags see above */
+ __u16 count; /* Number of addresses */
+ __u8 addr[0][ETH_ALEN];
+};
+
+#endif /* _UAPI__IF_TUN_H */
diff --git a/include/uapi/linux/if_tunnel.h b/include/uapi/linux/if_tunnel.h
new file mode 100644
index 0000000..5db5942
--- /dev/null
+++ b/include/uapi/linux/if_tunnel.h
@@ -0,0 +1,96 @@
+#ifndef _UAPI_IF_TUNNEL_H_
+#define _UAPI_IF_TUNNEL_H_
+
+#include <linux/types.h>
+#include <asm/byteorder.h>
+
+
+#define SIOCGETTUNNEL (SIOCDEVPRIVATE + 0)
+#define SIOCADDTUNNEL (SIOCDEVPRIVATE + 1)
+#define SIOCDELTUNNEL (SIOCDEVPRIVATE + 2)
+#define SIOCCHGTUNNEL (SIOCDEVPRIVATE + 3)
+#define SIOCGETPRL (SIOCDEVPRIVATE + 4)
+#define SIOCADDPRL (SIOCDEVPRIVATE + 5)
+#define SIOCDELPRL (SIOCDEVPRIVATE + 6)
+#define SIOCCHGPRL (SIOCDEVPRIVATE + 7)
+#define SIOCGET6RD (SIOCDEVPRIVATE + 8)
+#define SIOCADD6RD (SIOCDEVPRIVATE + 9)
+#define SIOCDEL6RD (SIOCDEVPRIVATE + 10)
+#define SIOCCHG6RD (SIOCDEVPRIVATE + 11)
+
+#define GRE_CSUM __cpu_to_be16(0x8000)
+#define GRE_ROUTING __cpu_to_be16(0x4000)
+#define GRE_KEY __cpu_to_be16(0x2000)
+#define GRE_SEQ __cpu_to_be16(0x1000)
+#define GRE_STRICT __cpu_to_be16(0x0800)
+#define GRE_REC __cpu_to_be16(0x0700)
+#define GRE_FLAGS __cpu_to_be16(0x00F8)
+#define GRE_VERSION __cpu_to_be16(0x0007)
+
+struct ip_tunnel_parm {
+ char name[IFNAMSIZ];
+ int link;
+ __be16 i_flags;
+ __be16 o_flags;
+ __be32 i_key;
+ __be32 o_key;
+ struct iphdr iph;
+};
+
+/* SIT-mode i_flags */
+#define SIT_ISATAP 0x0001
+
+struct ip_tunnel_prl {
+ __be32 addr;
+ __u16 flags;
+ __u16 __reserved;
+ __u32 datalen;
+ __u32 __reserved2;
+ /* data follows */
+};
+
+/* PRL flags */
+#define PRL_DEFAULT 0x0001
+
+struct ip_tunnel_6rd {
+ struct in6_addr prefix;
+ __be32 relay_prefix;
+ __u16 prefixlen;
+ __u16 relay_prefixlen;
+};
+
+enum {
+ IFLA_GRE_UNSPEC,
+ IFLA_GRE_LINK,
+ IFLA_GRE_IFLAGS,
+ IFLA_GRE_OFLAGS,
+ IFLA_GRE_IKEY,
+ IFLA_GRE_OKEY,
+ IFLA_GRE_LOCAL,
+ IFLA_GRE_REMOTE,
+ IFLA_GRE_TTL,
+ IFLA_GRE_TOS,
+ IFLA_GRE_PMTUDISC,
+ IFLA_GRE_ENCAP_LIMIT,
+ IFLA_GRE_FLOWINFO,
+ IFLA_GRE_FLAGS,
+ __IFLA_GRE_MAX,
+};
+
+#define IFLA_GRE_MAX (__IFLA_GRE_MAX - 1)
+
+/* VTI-mode i_flags */
+#define VTI_ISVTI 0x0001
+
+enum {
+ IFLA_VTI_UNSPEC,
+ IFLA_VTI_LINK,
+ IFLA_VTI_IKEY,
+ IFLA_VTI_OKEY,
+ IFLA_VTI_LOCAL,
+ IFLA_VTI_REMOTE,
+ __IFLA_VTI_MAX,
+};
+
+#define IFLA_VTI_MAX (__IFLA_VTI_MAX - 1)
+#endif /* _UAPI_IF_TUNNEL_H_ */
diff --git a/include/uapi/linux/if_vlan.h b/include/uapi/linux/if_vlan.h
new file mode 100644
index 0000000..0744f8e
--- /dev/null
+++ b/include/uapi/linux/if_vlan.h
@@ -0,0 +1,63 @@
+/*
+ * VLAN An implementation of 802.1Q VLAN tagging.
+ *
+ * Authors: Ben Greear <greearb@candelatech.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+
+#ifndef _UAPI_LINUX_IF_VLAN_H_
+#define _UAPI_LINUX_IF_VLAN_H_
+
+
+/* VLAN IOCTLs are found in sockios.h */
+
+/* Passed in vlan_ioctl_args structure to determine behaviour. */
+enum vlan_ioctl_cmds {
+ ADD_VLAN_CMD,
+ DEL_VLAN_CMD,
+ SET_VLAN_INGRESS_PRIORITY_CMD,
+ SET_VLAN_EGRESS_PRIORITY_CMD,
+ GET_VLAN_INGRESS_PRIORITY_CMD,
+ GET_VLAN_EGRESS_PRIORITY_CMD,
+ SET_VLAN_NAME_TYPE_CMD,
+ SET_VLAN_FLAG_CMD,
+ GET_VLAN_REALDEV_NAME_CMD, /* If this works, you know it's a VLAN device, btw */
+ GET_VLAN_VID_CMD /* Get the VID of this VLAN (specified by name) */
+};
+
+enum vlan_flags {
+ VLAN_FLAG_REORDER_HDR = 0x1,
+ VLAN_FLAG_GVRP = 0x2,
+ VLAN_FLAG_LOOSE_BINDING = 0x4,
+};
+
+enum vlan_name_types {
+ VLAN_NAME_TYPE_PLUS_VID, /* Name will look like: vlan0005 */
+ VLAN_NAME_TYPE_RAW_PLUS_VID, /* name will look like: eth1.0005 */
+ VLAN_NAME_TYPE_PLUS_VID_NO_PAD, /* Name will look like: vlan5 */
+ VLAN_NAME_TYPE_RAW_PLUS_VID_NO_PAD, /* Name will look like: eth0.5 */
+ VLAN_NAME_TYPE_HIGHEST
+};
+
+struct vlan_ioctl_args {
+ int cmd; /* Should be one of the vlan_ioctl_cmds enum above. */
+ char device1[24];
+
+ union {
+ char device2[24];
+ int VID;
+ unsigned int skb_priority;
+ unsigned int name_type;
+ unsigned int bind_type;
+ unsigned int flag; /* Matches vlan_dev_priv flags */
+ } u;
+
+ short vlan_qos;
+};
+
+#endif /* _UAPI_LINUX_IF_VLAN_H_ */
diff --git a/include/linux/if_x25.h b/include/uapi/linux/if_x25.h
similarity index 100%
rename from include/linux/if_x25.h
rename to include/uapi/linux/if_x25.h
diff --git a/include/uapi/linux/igmp.h b/include/uapi/linux/igmp.h
new file mode 100644
index 0000000..ccbb32a
--- /dev/null
+++ b/include/uapi/linux/igmp.h
@@ -0,0 +1,128 @@
+/*
+ * Linux NET3: Internet Group Management Protocol [IGMP]
+ *
+ * Authors:
+ * Alan Cox <alan@lxorguk.ukuu.org.uk>
+ *
+ * Extended to talk the BSD extended IGMP protocol of mrouted 3.6
+ *
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _UAPI_LINUX_IGMP_H
+#define _UAPI_LINUX_IGMP_H
+
+#include <linux/types.h>
+#include <asm/byteorder.h>
+
+/*
+ * IGMP protocol structures
+ */
+
+/*
+ * Header in on cable format
+ */
+
+struct igmphdr {
+ __u8 type;
+ __u8 code; /* For newer IGMP */
+ __sum16 csum;
+ __be32 group;
+};
+
+/* V3 group record types [grec_type] */
+#define IGMPV3_MODE_IS_INCLUDE 1
+#define IGMPV3_MODE_IS_EXCLUDE 2
+#define IGMPV3_CHANGE_TO_INCLUDE 3
+#define IGMPV3_CHANGE_TO_EXCLUDE 4
+#define IGMPV3_ALLOW_NEW_SOURCES 5
+#define IGMPV3_BLOCK_OLD_SOURCES 6
+
+struct igmpv3_grec {
+ __u8 grec_type;
+ __u8 grec_auxwords;
+ __be16 grec_nsrcs;
+ __be32 grec_mca;
+ __be32 grec_src[0];
+};
+
+struct igmpv3_report {
+ __u8 type;
+ __u8 resv1;
+ __be16 csum;
+ __be16 resv2;
+ __be16 ngrec;
+ struct igmpv3_grec grec[0];
+};
+
+struct igmpv3_query {
+ __u8 type;
+ __u8 code;
+ __be16 csum;
+ __be32 group;
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+ __u8 qrv:3,
+ suppress:1,
+ resv:4;
+#elif defined(__BIG_ENDIAN_BITFIELD)
+ __u8 resv:4,
+ suppress:1,
+ qrv:3;
+#else
+#error "Please fix <asm/byteorder.h>"
+#endif
+ __u8 qqic;
+ __be16 nsrcs;
+ __be32 srcs[0];
+};
+
+#define IGMP_HOST_MEMBERSHIP_QUERY 0x11 /* From RFC1112 */
+#define IGMP_HOST_MEMBERSHIP_REPORT 0x12 /* Ditto */
+#define IGMP_DVMRP 0x13 /* DVMRP routing */
+#define IGMP_PIM 0x14 /* PIM routing */
+#define IGMP_TRACE 0x15
+#define IGMPV2_HOST_MEMBERSHIP_REPORT 0x16 /* V2 version of 0x12 */
+#define IGMP_HOST_LEAVE_MESSAGE 0x17
+#define IGMPV3_HOST_MEMBERSHIP_REPORT 0x22 /* V3 version of 0x12 */
+
+#define IGMP_MTRACE_RESP 0x1e
+#define IGMP_MTRACE 0x1f
+
+
+/*
+ * Use the BSD names for these for compatibility
+ */
+
+#define IGMP_DELAYING_MEMBER 0x01
+#define IGMP_IDLE_MEMBER 0x02
+#define IGMP_LAZY_MEMBER 0x03
+#define IGMP_SLEEPING_MEMBER 0x04
+#define IGMP_AWAKENING_MEMBER 0x05
+
+#define IGMP_MINLEN 8
+
+#define IGMP_MAX_HOST_REPORT_DELAY 10 /* max delay for response to */
+ /* query (in seconds) */
+
+#define IGMP_TIMER_SCALE 10 /* denotes that the igmphdr->timer field */
+ /* specifies time in 10th of seconds */
+
+#define IGMP_AGE_THRESHOLD 400 /* If this host don't hear any IGMP V1 */
+ /* message in this period of time, */
+ /* revert to IGMP v2 router. */
+
+#define IGMP_ALL_HOSTS htonl(0xE0000001L)
+#define IGMP_ALL_ROUTER htonl(0xE0000002L)
+#define IGMPV3_ALL_MCR htonl(0xE0000016L)
+#define IGMP_LOCAL_GROUP htonl(0xE0000000L)
+#define IGMP_LOCAL_GROUP_MASK htonl(0xFFFFFF00L)
+
+/*
+ * struct for keeping the multicast list in
+ */
+
+#endif /* _UAPI_LINUX_IGMP_H */
diff --git a/include/uapi/linux/in.h b/include/uapi/linux/in.h
new file mode 100644
index 0000000..9edb441
--- /dev/null
+++ b/include/uapi/linux/in.h
@@ -0,0 +1,253 @@
+/*
+ * INET An implementation of the TCP/IP protocol suite for the LINUX
+ * operating system. INET is implemented using the BSD Socket
+ * interface as the means of communication with the user level.
+ *
+ * Definitions of the Internet Protocol.
+ *
+ * Version: @(#)in.h 1.0.1 04/21/93
+ *
+ * Authors: Original taken from the GNU Project <netinet/in.h> file.
+ * Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _UAPI_LINUX_IN_H
+#define _UAPI_LINUX_IN_H
+
+#include <linux/types.h>
+#include <linux/socket.h>
+
+/* Standard well-defined IP protocols. */
+enum {
+ IPPROTO_IP = 0, /* Dummy protocol for TCP */
+ IPPROTO_ICMP = 1, /* Internet Control Message Protocol */
+ IPPROTO_IGMP = 2, /* Internet Group Management Protocol */
+ IPPROTO_IPIP = 4, /* IPIP tunnels (older KA9Q tunnels use 94) */
+ IPPROTO_TCP = 6, /* Transmission Control Protocol */
+ IPPROTO_EGP = 8, /* Exterior Gateway Protocol */
+ IPPROTO_PUP = 12, /* PUP protocol */
+ IPPROTO_UDP = 17, /* User Datagram Protocol */
+ IPPROTO_IDP = 22, /* XNS IDP protocol */
+ IPPROTO_DCCP = 33, /* Datagram Congestion Control Protocol */
+ IPPROTO_RSVP = 46, /* RSVP protocol */
+ IPPROTO_GRE = 47, /* Cisco GRE tunnels (rfc 1701,1702) */
+
+ IPPROTO_IPV6 = 41, /* IPv6-in-IPv4 tunnelling */
+
+ IPPROTO_ESP = 50, /* Encapsulation Security Payload protocol */
+ IPPROTO_AH = 51, /* Authentication Header protocol */
+ IPPROTO_BEETPH = 94, /* IP option pseudo header for BEET */
+ IPPROTO_PIM = 103, /* Protocol Independent Multicast */
+
+ IPPROTO_COMP = 108, /* Compression Header protocol */
+ IPPROTO_SCTP = 132, /* Stream Control Transport Protocol */
+ IPPROTO_UDPLITE = 136, /* UDP-Lite (RFC 3828) */
+
+ IPPROTO_RAW = 255, /* Raw IP packets */
+ IPPROTO_MAX
+};
+
+
+/* Internet address. */
+struct in_addr {
+ __be32 s_addr;
+};
+
+#define IP_TOS 1
+#define IP_TTL 2
+#define IP_HDRINCL 3
+#define IP_OPTIONS 4
+#define IP_ROUTER_ALERT 5
+#define IP_RECVOPTS 6
+#define IP_RETOPTS 7
+#define IP_PKTINFO 8
+#define IP_PKTOPTIONS 9
+#define IP_MTU_DISCOVER 10
+#define IP_RECVERR 11
+#define IP_RECVTTL 12
+#define IP_RECVTOS 13
+#define IP_MTU 14
+#define IP_FREEBIND 15
+#define IP_IPSEC_POLICY 16
+#define IP_XFRM_POLICY 17
+#define IP_PASSSEC 18
+#define IP_TRANSPARENT 19
+
+/* BSD compatibility */
+#define IP_RECVRETOPTS IP_RETOPTS
+
+/* TProxy original addresses */
+#define IP_ORIGDSTADDR 20
+#define IP_RECVORIGDSTADDR IP_ORIGDSTADDR
+
+#define IP_MINTTL 21
+#define IP_NODEFRAG 22
+
+/* IP_MTU_DISCOVER values */
+#define IP_PMTUDISC_DONT 0 /* Never send DF frames */
+#define IP_PMTUDISC_WANT 1 /* Use per route hints */
+#define IP_PMTUDISC_DO 2 /* Always DF */
+#define IP_PMTUDISC_PROBE 3 /* Ignore dst pmtu */
+
+#define IP_MULTICAST_IF 32
+#define IP_MULTICAST_TTL 33
+#define IP_MULTICAST_LOOP 34
+#define IP_ADD_MEMBERSHIP 35
+#define IP_DROP_MEMBERSHIP 36
+#define IP_UNBLOCK_SOURCE 37
+#define IP_BLOCK_SOURCE 38
+#define IP_ADD_SOURCE_MEMBERSHIP 39
+#define IP_DROP_SOURCE_MEMBERSHIP 40
+#define IP_MSFILTER 41
+#define MCAST_JOIN_GROUP 42
+#define MCAST_BLOCK_SOURCE 43
+#define MCAST_UNBLOCK_SOURCE 44
+#define MCAST_LEAVE_GROUP 45
+#define MCAST_JOIN_SOURCE_GROUP 46
+#define MCAST_LEAVE_SOURCE_GROUP 47
+#define MCAST_MSFILTER 48
+#define IP_MULTICAST_ALL 49
+#define IP_UNICAST_IF 50
+
+#define MCAST_EXCLUDE 0
+#define MCAST_INCLUDE 1
+
+/* These need to appear somewhere around here */
+#define IP_DEFAULT_MULTICAST_TTL 1
+#define IP_DEFAULT_MULTICAST_LOOP 1
+
+/* Request struct for multicast socket ops */
+
+struct ip_mreq {
+ struct in_addr imr_multiaddr; /* IP multicast address of group */
+ struct in_addr imr_interface; /* local IP address of interface */
+};
+
+struct ip_mreqn {
+ struct in_addr imr_multiaddr; /* IP multicast address of group */
+ struct in_addr imr_address; /* local IP address of interface */
+ int imr_ifindex; /* Interface index */
+};
+
+struct ip_mreq_source {
+ __be32 imr_multiaddr;
+ __be32 imr_interface;
+ __be32 imr_sourceaddr;
+};
+
+struct ip_msfilter {
+ __be32 imsf_multiaddr;
+ __be32 imsf_interface;
+ __u32 imsf_fmode;
+ __u32 imsf_numsrc;
+ __be32 imsf_slist[1];
+};
+
+#define IP_MSFILTER_SIZE(numsrc) \
+ (sizeof(struct ip_msfilter) - sizeof(__u32) \
+ + (numsrc) * sizeof(__u32))
+
+struct group_req {
+ __u32 gr_interface; /* interface index */
+ struct __kernel_sockaddr_storage gr_group; /* group address */
+};
+
+struct group_source_req {
+ __u32 gsr_interface; /* interface index */
+ struct __kernel_sockaddr_storage gsr_group; /* group address */
+ struct __kernel_sockaddr_storage gsr_source; /* source address */
+};
+
+struct group_filter {
+ __u32 gf_interface; /* interface index */
+ struct __kernel_sockaddr_storage gf_group; /* multicast address */
+ __u32 gf_fmode; /* filter mode */
+ __u32 gf_numsrc; /* number of sources */
+ struct __kernel_sockaddr_storage gf_slist[1]; /* interface index */
+};
+
+#define GROUP_FILTER_SIZE(numsrc) \
+ (sizeof(struct group_filter) - sizeof(struct __kernel_sockaddr_storage) \
+ + (numsrc) * sizeof(struct __kernel_sockaddr_storage))
+
+struct in_pktinfo {
+ int ipi_ifindex;
+ struct in_addr ipi_spec_dst;
+ struct in_addr ipi_addr;
+};
+
+/* Structure describing an Internet (IP) socket address. */
+#define __SOCK_SIZE__ 16 /* sizeof(struct sockaddr) */
+struct sockaddr_in {
+ __kernel_sa_family_t sin_family; /* Address family */
+ __be16 sin_port; /* Port number */
+ struct in_addr sin_addr; /* Internet address */
+
+ /* Pad to size of `struct sockaddr'. */
+ unsigned char __pad[__SOCK_SIZE__ - sizeof(short int) -
+ sizeof(unsigned short int) - sizeof(struct in_addr)];
+};
+#define sin_zero __pad /* for BSD UNIX comp. -FvK */
+
+
+/*
+ * Definitions of the bits in an Internet address integer.
+ * On subnets, host and network parts are found according
+ * to the subnet mask, not these masks.
+ */
+#define IN_CLASSA(a) ((((long int) (a)) & 0x80000000) == 0)
+#define IN_CLASSA_NET 0xff000000
+#define IN_CLASSA_NSHIFT 24
+#define IN_CLASSA_HOST (0xffffffff & ~IN_CLASSA_NET)
+#define IN_CLASSA_MAX 128
+
+#define IN_CLASSB(a) ((((long int) (a)) & 0xc0000000) == 0x80000000)
+#define IN_CLASSB_NET 0xffff0000
+#define IN_CLASSB_NSHIFT 16
+#define IN_CLASSB_HOST (0xffffffff & ~IN_CLASSB_NET)
+#define IN_CLASSB_MAX 65536
+
+#define IN_CLASSC(a) ((((long int) (a)) & 0xe0000000) == 0xc0000000)
+#define IN_CLASSC_NET 0xffffff00
+#define IN_CLASSC_NSHIFT 8
+#define IN_CLASSC_HOST (0xffffffff & ~IN_CLASSC_NET)
+
+#define IN_CLASSD(a) ((((long int) (a)) & 0xf0000000) == 0xe0000000)
+#define IN_MULTICAST(a) IN_CLASSD(a)
+#define IN_MULTICAST_NET 0xF0000000
+
+#define IN_EXPERIMENTAL(a) ((((long int) (a)) & 0xf0000000) == 0xf0000000)
+#define IN_BADCLASS(a) IN_EXPERIMENTAL((a))
+
+/* Address to accept any incoming messages. */
+#define INADDR_ANY ((unsigned long int) 0x00000000)
+
+/* Address to send to all hosts. */
+#define INADDR_BROADCAST ((unsigned long int) 0xffffffff)
+
+/* Address indicating an error return. */
+#define INADDR_NONE ((unsigned long int) 0xffffffff)
+
+/* Network number for local host loopback. */
+#define IN_LOOPBACKNET 127
+
+/* Address to loopback in software to local host. */
+#define INADDR_LOOPBACK 0x7f000001 /* 127.0.0.1 */
+#define IN_LOOPBACK(a) ((((long int) (a)) & 0xff000000) == 0x7f000000)
+
+/* Defines for Multicast INADDR */
+#define INADDR_UNSPEC_GROUP 0xe0000000U /* 224.0.0.0 */
+#define INADDR_ALLHOSTS_GROUP 0xe0000001U /* 224.0.0.1 */
+#define INADDR_ALLRTRS_GROUP 0xe0000002U /* 224.0.0.2 */
+#define INADDR_MAX_LOCAL_GROUP 0xe00000ffU /* 224.0.0.255 */
+
+
+/* <asm/byteorder.h> contains the htonl type stuff.. */
+#include <asm/byteorder.h>
+
+
+#endif /* _UAPI_LINUX_IN_H */
diff --git a/include/uapi/linux/in6.h b/include/uapi/linux/in6.h
new file mode 100644
index 0000000..1e31599
--- /dev/null
+++ b/include/uapi/linux/in6.h
@@ -0,0 +1,279 @@
+/*
+ * Types and definitions for AF_INET6
+ * Linux INET6 implementation
+ *
+ * Authors:
+ * Pedro Roque <roque@di.fc.ul.pt>
+ *
+ * Sources:
+ * IPv6 Program Interfaces for BSD Systems
+ * <draft-ietf-ipngwg-bsd-api-05.txt>
+ *
+ * Advanced Sockets API for IPv6
+ * <draft-stevens-advanced-api-00.txt>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _UAPI_LINUX_IN6_H
+#define _UAPI_LINUX_IN6_H
+
+#include <linux/types.h>
+
+/*
+ * IPv6 address structure
+ */
+
+struct in6_addr {
+ union {
+ __u8 u6_addr8[16];
+ __be16 u6_addr16[8];
+ __be32 u6_addr32[4];
+ } in6_u;
+#define s6_addr in6_u.u6_addr8
+#define s6_addr16 in6_u.u6_addr16
+#define s6_addr32 in6_u.u6_addr32
+};
+
+/* IPv6 Wildcard Address (::) and Loopback Address (::1) defined in RFC2553
+ * NOTE: Be aware the IN6ADDR_* constants and in6addr_* externals are defined
+ * in network byte order, not in host byte order as are the IPv4 equivalents
+ */
+
+struct sockaddr_in6 {
+ unsigned short int sin6_family; /* AF_INET6 */
+ __be16 sin6_port; /* Transport layer port # */
+ __be32 sin6_flowinfo; /* IPv6 flow information */
+ struct in6_addr sin6_addr; /* IPv6 address */
+ __u32 sin6_scope_id; /* scope id (new in RFC2553) */
+};
+
+struct ipv6_mreq {
+ /* IPv6 multicast address of group */
+ struct in6_addr ipv6mr_multiaddr;
+
+ /* local IPv6 address of interface */
+ int ipv6mr_ifindex;
+};
+
+#define ipv6mr_acaddr ipv6mr_multiaddr
+
+struct in6_flowlabel_req {
+ struct in6_addr flr_dst;
+ __be32 flr_label;
+ __u8 flr_action;
+ __u8 flr_share;
+ __u16 flr_flags;
+ __u16 flr_expires;
+ __u16 flr_linger;
+ __u32 __flr_pad;
+ /* Options in format of IPV6_PKTOPTIONS */
+};
+
+#define IPV6_FL_A_GET 0
+#define IPV6_FL_A_PUT 1
+#define IPV6_FL_A_RENEW 2
+
+#define IPV6_FL_F_CREATE 1
+#define IPV6_FL_F_EXCL 2
+
+#define IPV6_FL_S_NONE 0
+#define IPV6_FL_S_EXCL 1
+#define IPV6_FL_S_PROCESS 2
+#define IPV6_FL_S_USER 3
+#define IPV6_FL_S_ANY 255
+
+
+/*
+ * Bitmask constant declarations to help applications select out the
+ * flow label and priority fields.
+ *
+ * Note that this are in host byte order while the flowinfo field of
+ * sockaddr_in6 is in network byte order.
+ */
+
+#define IPV6_FLOWINFO_FLOWLABEL 0x000fffff
+#define IPV6_FLOWINFO_PRIORITY 0x0ff00000
+
+/* These definitions are obsolete */
+#define IPV6_PRIORITY_UNCHARACTERIZED 0x0000
+#define IPV6_PRIORITY_FILLER 0x0100
+#define IPV6_PRIORITY_UNATTENDED 0x0200
+#define IPV6_PRIORITY_RESERVED1 0x0300
+#define IPV6_PRIORITY_BULK 0x0400
+#define IPV6_PRIORITY_RESERVED2 0x0500
+#define IPV6_PRIORITY_INTERACTIVE 0x0600
+#define IPV6_PRIORITY_CONTROL 0x0700
+#define IPV6_PRIORITY_8 0x0800
+#define IPV6_PRIORITY_9 0x0900
+#define IPV6_PRIORITY_10 0x0a00
+#define IPV6_PRIORITY_11 0x0b00
+#define IPV6_PRIORITY_12 0x0c00
+#define IPV6_PRIORITY_13 0x0d00
+#define IPV6_PRIORITY_14 0x0e00
+#define IPV6_PRIORITY_15 0x0f00
+
+/*
+ * IPV6 extension headers
+ */
+#define IPPROTO_HOPOPTS 0 /* IPv6 hop-by-hop options */
+#define IPPROTO_ROUTING 43 /* IPv6 routing header */
+#define IPPROTO_FRAGMENT 44 /* IPv6 fragmentation header */
+#define IPPROTO_ICMPV6 58 /* ICMPv6 */
+#define IPPROTO_NONE 59 /* IPv6 no next header */
+#define IPPROTO_DSTOPTS 60 /* IPv6 destination options */
+#define IPPROTO_MH 135 /* IPv6 mobility header */
+
+/*
+ * IPv6 TLV options.
+ */
+#define IPV6_TLV_PAD1 0
+#define IPV6_TLV_PADN 1
+#define IPV6_TLV_ROUTERALERT 5
+#define IPV6_TLV_JUMBO 194
+#define IPV6_TLV_HAO 201 /* home address option */
+
+/*
+ * IPV6 socket options
+ */
+
+#define IPV6_ADDRFORM 1
+#define IPV6_2292PKTINFO 2
+#define IPV6_2292HOPOPTS 3
+#define IPV6_2292DSTOPTS 4
+#define IPV6_2292RTHDR 5
+#define IPV6_2292PKTOPTIONS 6
+#define IPV6_CHECKSUM 7
+#define IPV6_2292HOPLIMIT 8
+#define IPV6_NEXTHOP 9
+#define IPV6_AUTHHDR 10 /* obsolete */
+#define IPV6_FLOWINFO 11
+
+#define IPV6_UNICAST_HOPS 16
+#define IPV6_MULTICAST_IF 17
+#define IPV6_MULTICAST_HOPS 18
+#define IPV6_MULTICAST_LOOP 19
+#define IPV6_ADD_MEMBERSHIP 20
+#define IPV6_DROP_MEMBERSHIP 21
+#define IPV6_ROUTER_ALERT 22
+#define IPV6_MTU_DISCOVER 23
+#define IPV6_MTU 24
+#define IPV6_RECVERR 25
+#define IPV6_V6ONLY 26
+#define IPV6_JOIN_ANYCAST 27
+#define IPV6_LEAVE_ANYCAST 28
+
+/* IPV6_MTU_DISCOVER values */
+#define IPV6_PMTUDISC_DONT 0
+#define IPV6_PMTUDISC_WANT 1
+#define IPV6_PMTUDISC_DO 2
+#define IPV6_PMTUDISC_PROBE 3
+
+/* Flowlabel */
+#define IPV6_FLOWLABEL_MGR 32
+#define IPV6_FLOWINFO_SEND 33
+
+#define IPV6_IPSEC_POLICY 34
+#define IPV6_XFRM_POLICY 35
+
+/*
+ * Multicast:
+ * Following socket options are shared between IPv4 and IPv6.
+ *
+ * MCAST_JOIN_GROUP 42
+ * MCAST_BLOCK_SOURCE 43
+ * MCAST_UNBLOCK_SOURCE 44
+ * MCAST_LEAVE_GROUP 45
+ * MCAST_JOIN_SOURCE_GROUP 46
+ * MCAST_LEAVE_SOURCE_GROUP 47
+ * MCAST_MSFILTER 48
+ */
+
+/*
+ * Advanced API (RFC3542) (1)
+ *
+ * Note: IPV6_RECVRTHDRDSTOPTS does not exist. see net/ipv6/datagram.c.
+ */
+
+#define IPV6_RECVPKTINFO 49
+#define IPV6_PKTINFO 50
+#define IPV6_RECVHOPLIMIT 51
+#define IPV6_HOPLIMIT 52
+#define IPV6_RECVHOPOPTS 53
+#define IPV6_HOPOPTS 54
+#define IPV6_RTHDRDSTOPTS 55
+#define IPV6_RECVRTHDR 56
+#define IPV6_RTHDR 57
+#define IPV6_RECVDSTOPTS 58
+#define IPV6_DSTOPTS 59
+#define IPV6_RECVPATHMTU 60
+#define IPV6_PATHMTU 61
+#define IPV6_DONTFRAG 62
+#if 0 /* not yet */
+#define IPV6_USE_MIN_MTU 63
+#endif
+
+/*
+ * Netfilter (1)
+ *
+ * Following socket options are used in ip6_tables;
+ * see include/linux/netfilter_ipv6/ip6_tables.h.
+ *
+ * IP6T_SO_SET_REPLACE / IP6T_SO_GET_INFO 64
+ * IP6T_SO_SET_ADD_COUNTERS / IP6T_SO_GET_ENTRIES 65
+ */
+
+/*
+ * Advanced API (RFC3542) (2)
+ */
+#define IPV6_RECVTCLASS 66
+#define IPV6_TCLASS 67
+
+/*
+ * Netfilter (2)
+ *
+ * Following socket options are used in ip6_tables;
+ * see include/linux/netfilter_ipv6/ip6_tables.h.
+ *
+ * IP6T_SO_GET_REVISION_MATCH 68
+ * IP6T_SO_GET_REVISION_TARGET 69
+ */
+
+/* RFC5014: Source address selection */
+#define IPV6_ADDR_PREFERENCES 72
+
+#define IPV6_PREFER_SRC_TMP 0x0001
+#define IPV6_PREFER_SRC_PUBLIC 0x0002
+#define IPV6_PREFER_SRC_PUBTMP_DEFAULT 0x0100
+#define IPV6_PREFER_SRC_COA 0x0004
+#define IPV6_PREFER_SRC_HOME 0x0400
+#define IPV6_PREFER_SRC_CGA 0x0008
+#define IPV6_PREFER_SRC_NONCGA 0x0800
+
+/* RFC5082: Generalized Ttl Security Mechanism */
+#define IPV6_MINHOPCOUNT 73
+
+#define IPV6_ORIGDSTADDR 74
+#define IPV6_RECVORIGDSTADDR IPV6_ORIGDSTADDR
+#define IPV6_TRANSPARENT 75
+#define IPV6_UNICAST_IF 76
+
+/*
+ * Multicast Routing:
+ * see include/linux/mroute6.h.
+ *
+ * MRT6_INIT 200
+ * MRT6_DONE 201
+ * MRT6_ADD_MIF 202
+ * MRT6_DEL_MIF 203
+ * MRT6_ADD_MFC 204
+ * MRT6_DEL_MFC 205
+ * MRT6_VERSION 206
+ * MRT6_ASSERT 207
+ * MRT6_PIM 208
+ * (reserved) 209
+ */
+#endif /* _UAPI_LINUX_IN6_H */
diff --git a/include/linux/in_route.h b/include/uapi/linux/in_route.h
similarity index 100%
rename from include/linux/in_route.h
rename to include/uapi/linux/in_route.h
diff --git a/include/uapi/linux/inet_diag.h b/include/uapi/linux/inet_diag.h
new file mode 100644
index 0000000..8c469af
--- /dev/null
+++ b/include/uapi/linux/inet_diag.h
@@ -0,0 +1,136 @@
+#ifndef _UAPI_INET_DIAG_H_
+#define _UAPI_INET_DIAG_H_
+
+#include <linux/types.h>
+
+/* Just some random number */
+#define TCPDIAG_GETSOCK 18
+#define DCCPDIAG_GETSOCK 19
+
+#define INET_DIAG_GETSOCK_MAX 24
+
+/* Socket identity */
+struct inet_diag_sockid {
+ __be16 idiag_sport;
+ __be16 idiag_dport;
+ __be32 idiag_src[4];
+ __be32 idiag_dst[4];
+ __u32 idiag_if;
+ __u32 idiag_cookie[2];
+#define INET_DIAG_NOCOOKIE (~0U)
+};
+
+/* Request structure */
+
+struct inet_diag_req {
+ __u8 idiag_family; /* Family of addresses. */
+ __u8 idiag_src_len;
+ __u8 idiag_dst_len;
+ __u8 idiag_ext; /* Query extended information */
+
+ struct inet_diag_sockid id;
+
+ __u32 idiag_states; /* States to dump */
+ __u32 idiag_dbs; /* Tables to dump (NI) */
+};
+
+struct inet_diag_req_v2 {
+ __u8 sdiag_family;
+ __u8 sdiag_protocol;
+ __u8 idiag_ext;
+ __u8 pad;
+ __u32 idiag_states;
+ struct inet_diag_sockid id;
+};
+
+enum {
+ INET_DIAG_REQ_NONE,
+ INET_DIAG_REQ_BYTECODE,
+};
+
+#define INET_DIAG_REQ_MAX INET_DIAG_REQ_BYTECODE
+
+/* Bytecode is sequence of 4 byte commands followed by variable arguments.
+ * All the commands identified by "code" are conditional jumps forward:
+ * to offset cc+"yes" or to offset cc+"no". "yes" is supposed to be
+ * length of the command and its arguments.
+ */
+
+struct inet_diag_bc_op {
+ unsigned char code;
+ unsigned char yes;
+ unsigned short no;
+};
+
+enum {
+ INET_DIAG_BC_NOP,
+ INET_DIAG_BC_JMP,
+ INET_DIAG_BC_S_GE,
+ INET_DIAG_BC_S_LE,
+ INET_DIAG_BC_D_GE,
+ INET_DIAG_BC_D_LE,
+ INET_DIAG_BC_AUTO,
+ INET_DIAG_BC_S_COND,
+ INET_DIAG_BC_D_COND,
+};
+
+struct inet_diag_hostcond {
+ __u8 family;
+ __u8 prefix_len;
+ int port;
+ __be32 addr[0];
+};
+
+/* Base info structure. It contains socket identity (addrs/ports/cookie)
+ * and, alas, the information shown by netstat. */
+struct inet_diag_msg {
+ __u8 idiag_family;
+ __u8 idiag_state;
+ __u8 idiag_timer;
+ __u8 idiag_retrans;
+
+ struct inet_diag_sockid id;
+
+ __u32 idiag_expires;
+ __u32 idiag_rqueue;
+ __u32 idiag_wqueue;
+ __u32 idiag_uid;
+ __u32 idiag_inode;
+};
+
+/* Extensions */
+
+enum {
+ INET_DIAG_NONE,
+ INET_DIAG_MEMINFO,
+ INET_DIAG_INFO,
+ INET_DIAG_VEGASINFO,
+ INET_DIAG_CONG,
+ INET_DIAG_TOS,
+ INET_DIAG_TCLASS,
+ INET_DIAG_SKMEMINFO,
+};
+
+#define INET_DIAG_MAX INET_DIAG_SKMEMINFO
+
+
+/* INET_DIAG_MEM */
+
+struct inet_diag_meminfo {
+ __u32 idiag_rmem;
+ __u32 idiag_wmem;
+ __u32 idiag_fmem;
+ __u32 idiag_tmem;
+};
+
+/* INET_DIAG_VEGASINFO */
+
+struct tcpvegas_info {
+ __u32 tcpv_enabled;
+ __u32 tcpv_rttcnt;
+ __u32 tcpv_rtt;
+ __u32 tcpv_minrtt;
+};
+
+
+#endif /* _UAPI_INET_DIAG_H_ */
diff --git a/include/uapi/linux/inotify.h b/include/uapi/linux/inotify.h
new file mode 100644
index 0000000..e6bf35b
--- /dev/null
+++ b/include/uapi/linux/inotify.h
@@ -0,0 +1,74 @@
+/*
+ * Inode based directory notification for Linux
+ *
+ * Copyright (C) 2005 John McCutchan
+ */
+
+#ifndef _UAPI_LINUX_INOTIFY_H
+#define _UAPI_LINUX_INOTIFY_H
+
+/* For O_CLOEXEC and O_NONBLOCK */
+#include <linux/fcntl.h>
+#include <linux/types.h>
+
+/*
+ * struct inotify_event - structure read from the inotify device for each event
+ *
+ * When you are watching a directory, you will receive the filename for events
+ * such as IN_CREATE, IN_DELETE, IN_OPEN, IN_CLOSE, ..., relative to the wd.
+ */
+struct inotify_event {
+ __s32 wd; /* watch descriptor */
+ __u32 mask; /* watch mask */
+ __u32 cookie; /* cookie to synchronize two events */
+ __u32 len; /* length (including nulls) of name */
+ char name[0]; /* stub for possible name */
+};
+
+/* the following are legal, implemented events that user-space can watch for */
+#define IN_ACCESS 0x00000001 /* File was accessed */
+#define IN_MODIFY 0x00000002 /* File was modified */
+#define IN_ATTRIB 0x00000004 /* Metadata changed */
+#define IN_CLOSE_WRITE 0x00000008 /* Writtable file was closed */
+#define IN_CLOSE_NOWRITE 0x00000010 /* Unwrittable file closed */
+#define IN_OPEN 0x00000020 /* File was opened */
+#define IN_MOVED_FROM 0x00000040 /* File was moved from X */
+#define IN_MOVED_TO 0x00000080 /* File was moved to Y */
+#define IN_CREATE 0x00000100 /* Subfile was created */
+#define IN_DELETE 0x00000200 /* Subfile was deleted */
+#define IN_DELETE_SELF 0x00000400 /* Self was deleted */
+#define IN_MOVE_SELF 0x00000800 /* Self was moved */
+
+/* the following are legal events. they are sent as needed to any watch */
+#define IN_UNMOUNT 0x00002000 /* Backing fs was unmounted */
+#define IN_Q_OVERFLOW 0x00004000 /* Event queued overflowed */
+#define IN_IGNORED 0x00008000 /* File was ignored */
+
+/* helper events */
+#define IN_CLOSE (IN_CLOSE_WRITE | IN_CLOSE_NOWRITE) /* close */
+#define IN_MOVE (IN_MOVED_FROM | IN_MOVED_TO) /* moves */
+
+/* special flags */
+#define IN_ONLYDIR 0x01000000 /* only watch the path if it is a directory */
+#define IN_DONT_FOLLOW 0x02000000 /* don't follow a sym link */
+#define IN_EXCL_UNLINK 0x04000000 /* exclude events on unlinked objects */
+#define IN_MASK_ADD 0x20000000 /* add to the mask of an already existing watch */
+#define IN_ISDIR 0x40000000 /* event occurred against dir */
+#define IN_ONESHOT 0x80000000 /* only send event once */
+
+/*
+ * All of the events - we build the list by hand so that we can add flags in
+ * the future and not break backward compatibility. Apps will get only the
+ * events that they originally wanted. Be sure to add new events here!
+ */
+#define IN_ALL_EVENTS (IN_ACCESS | IN_MODIFY | IN_ATTRIB | IN_CLOSE_WRITE | \
+ IN_CLOSE_NOWRITE | IN_OPEN | IN_MOVED_FROM | \
+ IN_MOVED_TO | IN_DELETE | IN_CREATE | IN_DELETE_SELF | \
+ IN_MOVE_SELF)
+
+/* Flags for sys_inotify_init1. */
+#define IN_CLOEXEC O_CLOEXEC
+#define IN_NONBLOCK O_NONBLOCK
+
+
+#endif /* _UAPI_LINUX_INOTIFY_H */
diff --git a/include/uapi/linux/input.h b/include/uapi/linux/input.h
new file mode 100644
index 0000000..5588285
--- /dev/null
+++ b/include/uapi/linux/input.h
@@ -0,0 +1,1153 @@
+/*
+ * Copyright (c) 1999-2002 Vojtech Pavlik
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef _UAPI_INPUT_H
+#define _UAPI_INPUT_H
+
+
+#ifndef __KERNEL__
+#include <sys/time.h>
+#include <sys/ioctl.h>
+#include <sys/types.h>
+#include <linux/types.h>
+#endif
+
+
+/*
+ * The event structure itself
+ */
+
+struct input_event {
+ struct timeval time;
+ __u16 type;
+ __u16 code;
+ __s32 value;
+};
+
+/*
+ * Protocol version.
+ */
+
+#define EV_VERSION 0x010001
+
+/*
+ * IOCTLs (0x00 - 0x7f)
+ */
+
+struct input_id {
+ __u16 bustype;
+ __u16 vendor;
+ __u16 product;
+ __u16 version;
+};
+
+/**
+ * struct input_absinfo - used by EVIOCGABS/EVIOCSABS ioctls
+ * @value: latest reported value for the axis.
+ * @minimum: specifies minimum value for the axis.
+ * @maximum: specifies maximum value for the axis.
+ * @fuzz: specifies fuzz value that is used to filter noise from
+ * the event stream.
+ * @flat: values that are within this value will be discarded by
+ * joydev interface and reported as 0 instead.
+ * @resolution: specifies resolution for the values reported for
+ * the axis.
+ *
+ * Note that input core does not clamp reported values to the
+ * [minimum, maximum] limits, such task is left to userspace.
+ *
+ * Resolution for main axes (ABS_X, ABS_Y, ABS_Z) is reported in
+ * units per millimeter (units/mm), resolution for rotational axes
+ * (ABS_RX, ABS_RY, ABS_RZ) is reported in units per radian.
+ */
+struct input_absinfo {
+ __s32 value;
+ __s32 minimum;
+ __s32 maximum;
+ __s32 fuzz;
+ __s32 flat;
+ __s32 resolution;
+};
+
+/**
+ * struct input_keymap_entry - used by EVIOCGKEYCODE/EVIOCSKEYCODE ioctls
+ * @scancode: scancode represented in machine-endian form.
+ * @len: length of the scancode that resides in @scancode buffer.
+ * @index: index in the keymap, may be used instead of scancode
+ * @flags: allows to specify how kernel should handle the request. For
+ * example, setting INPUT_KEYMAP_BY_INDEX flag indicates that kernel
+ * should perform lookup in keymap by @index instead of @scancode
+ * @keycode: key code assigned to this scancode
+ *
+ * The structure is used to retrieve and modify keymap data. Users have
+ * option of performing lookup either by @scancode itself or by @index
+ * in keymap entry. EVIOCGKEYCODE will also return scancode or index
+ * (depending on which element was used to perform lookup).
+ */
+struct input_keymap_entry {
+#define INPUT_KEYMAP_BY_INDEX (1 << 0)
+ __u8 flags;
+ __u8 len;
+ __u16 index;
+ __u32 keycode;
+ __u8 scancode[32];
+};
+
+#define EVIOCGVERSION _IOR('E', 0x01, int) /* get driver version */
+#define EVIOCGID _IOR('E', 0x02, struct input_id) /* get device ID */
+#define EVIOCGREP _IOR('E', 0x03, unsigned int[2]) /* get repeat settings */
+#define EVIOCSREP _IOW('E', 0x03, unsigned int[2]) /* set repeat settings */
+
+#define EVIOCGKEYCODE _IOR('E', 0x04, unsigned int[2]) /* get keycode */
+#define EVIOCGKEYCODE_V2 _IOR('E', 0x04, struct input_keymap_entry)
+#define EVIOCSKEYCODE _IOW('E', 0x04, unsigned int[2]) /* set keycode */
+#define EVIOCSKEYCODE_V2 _IOW('E', 0x04, struct input_keymap_entry)
+
+#define EVIOCGNAME(len) _IOC(_IOC_READ, 'E', 0x06, len) /* get device name */
+#define EVIOCGPHYS(len) _IOC(_IOC_READ, 'E', 0x07, len) /* get physical location */
+#define EVIOCGUNIQ(len) _IOC(_IOC_READ, 'E', 0x08, len) /* get unique identifier */
+#define EVIOCGPROP(len) _IOC(_IOC_READ, 'E', 0x09, len) /* get device properties */
+
+/**
+ * EVIOCGMTSLOTS(len) - get MT slot values
+ * @len: size of the data buffer in bytes
+ *
+ * The ioctl buffer argument should be binary equivalent to
+ *
+ * struct input_mt_request_layout {
+ * __u32 code;
+ * __s32 values[num_slots];
+ * };
+ *
+ * where num_slots is the (arbitrary) number of MT slots to extract.
+ *
+ * The ioctl size argument (len) is the size of the buffer, which
+ * should satisfy len = (num_slots + 1) * sizeof(__s32). If len is
+ * too small to fit all available slots, the first num_slots are
+ * returned.
+ *
+ * Before the call, code is set to the wanted ABS_MT event type. On
+ * return, values[] is filled with the slot values for the specified
+ * ABS_MT code.
+ *
+ * If the request code is not an ABS_MT value, -EINVAL is returned.
+ */
+#define EVIOCGMTSLOTS(len) _IOC(_IOC_READ, 'E', 0x0a, len)
+
+#define EVIOCGKEY(len) _IOC(_IOC_READ, 'E', 0x18, len) /* get global key state */
+#define EVIOCGLED(len) _IOC(_IOC_READ, 'E', 0x19, len) /* get all LEDs */
+#define EVIOCGSND(len) _IOC(_IOC_READ, 'E', 0x1a, len) /* get all sounds status */
+#define EVIOCGSW(len) _IOC(_IOC_READ, 'E', 0x1b, len) /* get all switch states */
+
+#define EVIOCGBIT(ev,len) _IOC(_IOC_READ, 'E', 0x20 + (ev), len) /* get event bits */
+#define EVIOCGABS(abs) _IOR('E', 0x40 + (abs), struct input_absinfo) /* get abs value/limits */
+#define EVIOCSABS(abs) _IOW('E', 0xc0 + (abs), struct input_absinfo) /* set abs value/limits */
+
+#define EVIOCSFF _IOC(_IOC_WRITE, 'E', 0x80, sizeof(struct ff_effect)) /* send a force effect to a force feedback device */
+#define EVIOCRMFF _IOW('E', 0x81, int) /* Erase a force effect */
+#define EVIOCGEFFECTS _IOR('E', 0x84, int) /* Report number of effects playable at the same time */
+
+#define EVIOCGRAB _IOW('E', 0x90, int) /* Grab/Release device */
+
+#define EVIOCSCLOCKID _IOW('E', 0xa0, int) /* Set clockid to be used for timestamps */
+
+/*
+ * Device properties and quirks
+ */
+
+#define INPUT_PROP_POINTER 0x00 /* needs a pointer */
+#define INPUT_PROP_DIRECT 0x01 /* direct input devices */
+#define INPUT_PROP_BUTTONPAD 0x02 /* has button(s) under pad */
+#define INPUT_PROP_SEMI_MT 0x03 /* touch rectangle only */
+
+#define INPUT_PROP_MAX 0x1f
+#define INPUT_PROP_CNT (INPUT_PROP_MAX + 1)
+
+/*
+ * Event types
+ */
+
+#define EV_SYN 0x00
+#define EV_KEY 0x01
+#define EV_REL 0x02
+#define EV_ABS 0x03
+#define EV_MSC 0x04
+#define EV_SW 0x05
+#define EV_LED 0x11
+#define EV_SND 0x12
+#define EV_REP 0x14
+#define EV_FF 0x15
+#define EV_PWR 0x16
+#define EV_FF_STATUS 0x17
+#define EV_MAX 0x1f
+#define EV_CNT (EV_MAX+1)
+
+/*
+ * Synchronization events.
+ */
+
+#define SYN_REPORT 0
+#define SYN_CONFIG 1
+#define SYN_MT_REPORT 2
+#define SYN_DROPPED 3
+
+/*
+ * Keys and buttons
+ *
+ * Most of the keys/buttons are modeled after USB HUT 1.12
+ * (see http://www.usb.org/developers/hidpage).
+ * Abbreviations in the comments:
+ * AC - Application Control
+ * AL - Application Launch Button
+ * SC - System Control
+ */
+
+#define KEY_RESERVED 0
+#define KEY_ESC 1
+#define KEY_1 2
+#define KEY_2 3
+#define KEY_3 4
+#define KEY_4 5
+#define KEY_5 6
+#define KEY_6 7
+#define KEY_7 8
+#define KEY_8 9
+#define KEY_9 10
+#define KEY_0 11
+#define KEY_MINUS 12
+#define KEY_EQUAL 13
+#define KEY_BACKSPACE 14
+#define KEY_TAB 15
+#define KEY_Q 16
+#define KEY_W 17
+#define KEY_E 18
+#define KEY_R 19
+#define KEY_T 20
+#define KEY_Y 21
+#define KEY_U 22
+#define KEY_I 23
+#define KEY_O 24
+#define KEY_P 25
+#define KEY_LEFTBRACE 26
+#define KEY_RIGHTBRACE 27
+#define KEY_ENTER 28
+#define KEY_LEFTCTRL 29
+#define KEY_A 30
+#define KEY_S 31
+#define KEY_D 32
+#define KEY_F 33
+#define KEY_G 34
+#define KEY_H 35
+#define KEY_J 36
+#define KEY_K 37
+#define KEY_L 38
+#define KEY_SEMICOLON 39
+#define KEY_APOSTROPHE 40
+#define KEY_GRAVE 41
+#define KEY_LEFTSHIFT 42
+#define KEY_BACKSLASH 43
+#define KEY_Z 44
+#define KEY_X 45
+#define KEY_C 46
+#define KEY_V 47
+#define KEY_B 48
+#define KEY_N 49
+#define KEY_M 50
+#define KEY_COMMA 51
+#define KEY_DOT 52
+#define KEY_SLASH 53
+#define KEY_RIGHTSHIFT 54
+#define KEY_KPASTERISK 55
+#define KEY_LEFTALT 56
+#define KEY_SPACE 57
+#define KEY_CAPSLOCK 58
+#define KEY_F1 59
+#define KEY_F2 60
+#define KEY_F3 61
+#define KEY_F4 62
+#define KEY_F5 63
+#define KEY_F6 64
+#define KEY_F7 65
+#define KEY_F8 66
+#define KEY_F9 67
+#define KEY_F10 68
+#define KEY_NUMLOCK 69
+#define KEY_SCROLLLOCK 70
+#define KEY_KP7 71
+#define KEY_KP8 72
+#define KEY_KP9 73
+#define KEY_KPMINUS 74
+#define KEY_KP4 75
+#define KEY_KP5 76
+#define KEY_KP6 77
+#define KEY_KPPLUS 78
+#define KEY_KP1 79
+#define KEY_KP2 80
+#define KEY_KP3 81
+#define KEY_KP0 82
+#define KEY_KPDOT 83
+
+#define KEY_ZENKAKUHANKAKU 85
+#define KEY_102ND 86
+#define KEY_F11 87
+#define KEY_F12 88
+#define KEY_RO 89
+#define KEY_KATAKANA 90
+#define KEY_HIRAGANA 91
+#define KEY_HENKAN 92
+#define KEY_KATAKANAHIRAGANA 93
+#define KEY_MUHENKAN 94
+#define KEY_KPJPCOMMA 95
+#define KEY_KPENTER 96
+#define KEY_RIGHTCTRL 97
+#define KEY_KPSLASH 98
+#define KEY_SYSRQ 99
+#define KEY_RIGHTALT 100
+#define KEY_LINEFEED 101
+#define KEY_HOME 102
+#define KEY_UP 103
+#define KEY_PAGEUP 104
+#define KEY_LEFT 105
+#define KEY_RIGHT 106
+#define KEY_END 107
+#define KEY_DOWN 108
+#define KEY_PAGEDOWN 109
+#define KEY_INSERT 110
+#define KEY_DELETE 111
+#define KEY_MACRO 112
+#define KEY_MUTE 113
+#define KEY_VOLUMEDOWN 114
+#define KEY_VOLUMEUP 115
+#define KEY_POWER 116 /* SC System Power Down */
+#define KEY_KPEQUAL 117
+#define KEY_KPPLUSMINUS 118
+#define KEY_PAUSE 119
+#define KEY_SCALE 120 /* AL Compiz Scale (Expose) */
+
+#define KEY_KPCOMMA 121
+#define KEY_HANGEUL 122
+#define KEY_HANGUEL KEY_HANGEUL
+#define KEY_HANJA 123
+#define KEY_YEN 124
+#define KEY_LEFTMETA 125
+#define KEY_RIGHTMETA 126
+#define KEY_COMPOSE 127
+
+#define KEY_STOP 128 /* AC Stop */
+#define KEY_AGAIN 129
+#define KEY_PROPS 130 /* AC Properties */
+#define KEY_UNDO 131 /* AC Undo */
+#define KEY_FRONT 132
+#define KEY_COPY 133 /* AC Copy */
+#define KEY_OPEN 134 /* AC Open */
+#define KEY_PASTE 135 /* AC Paste */
+#define KEY_FIND 136 /* AC Search */
+#define KEY_CUT 137 /* AC Cut */
+#define KEY_HELP 138 /* AL Integrated Help Center */
+#define KEY_MENU 139 /* Menu (show menu) */
+#define KEY_CALC 140 /* AL Calculator */
+#define KEY_SETUP 141
+#define KEY_SLEEP 142 /* SC System Sleep */
+#define KEY_WAKEUP 143 /* System Wake Up */
+#define KEY_FILE 144 /* AL Local Machine Browser */
+#define KEY_SENDFILE 145
+#define KEY_DELETEFILE 146
+#define KEY_XFER 147
+#define KEY_PROG1 148
+#define KEY_PROG2 149
+#define KEY_WWW 150 /* AL Internet Browser */
+#define KEY_MSDOS 151
+#define KEY_COFFEE 152 /* AL Terminal Lock/Screensaver */
+#define KEY_SCREENLOCK KEY_COFFEE
+#define KEY_DIRECTION 153
+#define KEY_CYCLEWINDOWS 154
+#define KEY_MAIL 155
+#define KEY_BOOKMARKS 156 /* AC Bookmarks */
+#define KEY_COMPUTER 157
+#define KEY_BACK 158 /* AC Back */
+#define KEY_FORWARD 159 /* AC Forward */
+#define KEY_CLOSECD 160
+#define KEY_EJECTCD 161
+#define KEY_EJECTCLOSECD 162
+#define KEY_NEXTSONG 163
+#define KEY_PLAYPAUSE 164
+#define KEY_PREVIOUSSONG 165
+#define KEY_STOPCD 166
+#define KEY_RECORD 167
+#define KEY_REWIND 168
+#define KEY_PHONE 169 /* Media Select Telephone */
+#define KEY_ISO 170
+#define KEY_CONFIG 171 /* AL Consumer Control Configuration */
+#define KEY_HOMEPAGE 172 /* AC Home */
+#define KEY_REFRESH 173 /* AC Refresh */
+#define KEY_EXIT 174 /* AC Exit */
+#define KEY_MOVE 175
+#define KEY_EDIT 176
+#define KEY_SCROLLUP 177
+#define KEY_SCROLLDOWN 178
+#define KEY_KPLEFTPAREN 179
+#define KEY_KPRIGHTPAREN 180
+#define KEY_NEW 181 /* AC New */
+#define KEY_REDO 182 /* AC Redo/Repeat */
+
+#define KEY_F13 183
+#define KEY_F14 184
+#define KEY_F15 185
+#define KEY_F16 186
+#define KEY_F17 187
+#define KEY_F18 188
+#define KEY_F19 189
+#define KEY_F20 190
+#define KEY_F21 191
+#define KEY_F22 192
+#define KEY_F23 193
+#define KEY_F24 194
+
+#define KEY_PLAYCD 200
+#define KEY_PAUSECD 201
+#define KEY_PROG3 202
+#define KEY_PROG4 203
+#define KEY_DASHBOARD 204 /* AL Dashboard */
+#define KEY_SUSPEND 205
+#define KEY_CLOSE 206 /* AC Close */
+#define KEY_PLAY 207
+#define KEY_FASTFORWARD 208
+#define KEY_BASSBOOST 209
+#define KEY_PRINT 210 /* AC Print */
+#define KEY_HP 211
+#define KEY_CAMERA 212
+#define KEY_SOUND 213
+#define KEY_QUESTION 214
+#define KEY_EMAIL 215
+#define KEY_CHAT 216
+#define KEY_SEARCH 217
+#define KEY_CONNECT 218
+#define KEY_FINANCE 219 /* AL Checkbook/Finance */
+#define KEY_SPORT 220
+#define KEY_SHOP 221
+#define KEY_ALTERASE 222
+#define KEY_CANCEL 223 /* AC Cancel */
+#define KEY_BRIGHTNESSDOWN 224
+#define KEY_BRIGHTNESSUP 225
+#define KEY_MEDIA 226
+
+#define KEY_SWITCHVIDEOMODE 227 /* Cycle between available video
+ outputs (Monitor/LCD/TV-out/etc) */
+#define KEY_KBDILLUMTOGGLE 228
+#define KEY_KBDILLUMDOWN 229
+#define KEY_KBDILLUMUP 230
+
+#define KEY_SEND 231 /* AC Send */
+#define KEY_REPLY 232 /* AC Reply */
+#define KEY_FORWARDMAIL 233 /* AC Forward Msg */
+#define KEY_SAVE 234 /* AC Save */
+#define KEY_DOCUMENTS 235
+
+#define KEY_BATTERY 236
+
+#define KEY_BLUETOOTH 237
+#define KEY_WLAN 238
+#define KEY_UWB 239
+
+#define KEY_UNKNOWN 240
+
+#define KEY_VIDEO_NEXT 241 /* drive next video source */
+#define KEY_VIDEO_PREV 242 /* drive previous video source */
+#define KEY_BRIGHTNESS_CYCLE 243 /* brightness up, after max is min */
+#define KEY_BRIGHTNESS_ZERO 244 /* brightness off, use ambient */
+#define KEY_DISPLAY_OFF 245 /* display device to off state */
+
+#define KEY_WIMAX 246
+#define KEY_RFKILL 247 /* Key that controls all radios */
+
+#define KEY_MICMUTE 248 /* Mute / unmute the microphone */
+
+/* Code 255 is reserved for special needs of AT keyboard driver */
+
+#define BTN_MISC 0x100
+#define BTN_0 0x100
+#define BTN_1 0x101
+#define BTN_2 0x102
+#define BTN_3 0x103
+#define BTN_4 0x104
+#define BTN_5 0x105
+#define BTN_6 0x106
+#define BTN_7 0x107
+#define BTN_8 0x108
+#define BTN_9 0x109
+
+#define BTN_MOUSE 0x110
+#define BTN_LEFT 0x110
+#define BTN_RIGHT 0x111
+#define BTN_MIDDLE 0x112
+#define BTN_SIDE 0x113
+#define BTN_EXTRA 0x114
+#define BTN_FORWARD 0x115
+#define BTN_BACK 0x116
+#define BTN_TASK 0x117
+
+#define BTN_JOYSTICK 0x120
+#define BTN_TRIGGER 0x120
+#define BTN_THUMB 0x121
+#define BTN_THUMB2 0x122
+#define BTN_TOP 0x123
+#define BTN_TOP2 0x124
+#define BTN_PINKIE 0x125
+#define BTN_BASE 0x126
+#define BTN_BASE2 0x127
+#define BTN_BASE3 0x128
+#define BTN_BASE4 0x129
+#define BTN_BASE5 0x12a
+#define BTN_BASE6 0x12b
+#define BTN_DEAD 0x12f
+
+#define BTN_GAMEPAD 0x130
+#define BTN_A 0x130
+#define BTN_B 0x131
+#define BTN_C 0x132
+#define BTN_X 0x133
+#define BTN_Y 0x134
+#define BTN_Z 0x135
+#define BTN_TL 0x136
+#define BTN_TR 0x137
+#define BTN_TL2 0x138
+#define BTN_TR2 0x139
+#define BTN_SELECT 0x13a
+#define BTN_START 0x13b
+#define BTN_MODE 0x13c
+#define BTN_THUMBL 0x13d
+#define BTN_THUMBR 0x13e
+
+#define BTN_DIGI 0x140
+#define BTN_TOOL_PEN 0x140
+#define BTN_TOOL_RUBBER 0x141
+#define BTN_TOOL_BRUSH 0x142
+#define BTN_TOOL_PENCIL 0x143
+#define BTN_TOOL_AIRBRUSH 0x144
+#define BTN_TOOL_FINGER 0x145
+#define BTN_TOOL_MOUSE 0x146
+#define BTN_TOOL_LENS 0x147
+#define BTN_TOOL_QUINTTAP 0x148 /* Five fingers on trackpad */
+#define BTN_TOUCH 0x14a
+#define BTN_STYLUS 0x14b
+#define BTN_STYLUS2 0x14c
+#define BTN_TOOL_DOUBLETAP 0x14d
+#define BTN_TOOL_TRIPLETAP 0x14e
+#define BTN_TOOL_QUADTAP 0x14f /* Four fingers on trackpad */
+
+#define BTN_WHEEL 0x150
+#define BTN_GEAR_DOWN 0x150
+#define BTN_GEAR_UP 0x151
+
+#define KEY_OK 0x160
+#define KEY_SELECT 0x161
+#define KEY_GOTO 0x162
+#define KEY_CLEAR 0x163
+#define KEY_POWER2 0x164
+#define KEY_OPTION 0x165
+#define KEY_INFO 0x166 /* AL OEM Features/Tips/Tutorial */
+#define KEY_TIME 0x167
+#define KEY_VENDOR 0x168
+#define KEY_ARCHIVE 0x169
+#define KEY_PROGRAM 0x16a /* Media Select Program Guide */
+#define KEY_CHANNEL 0x16b
+#define KEY_FAVORITES 0x16c
+#define KEY_EPG 0x16d
+#define KEY_PVR 0x16e /* Media Select Home */
+#define KEY_MHP 0x16f
+#define KEY_LANGUAGE 0x170
+#define KEY_TITLE 0x171
+#define KEY_SUBTITLE 0x172
+#define KEY_ANGLE 0x173
+#define KEY_ZOOM 0x174
+#define KEY_MODE 0x175
+#define KEY_KEYBOARD 0x176
+#define KEY_SCREEN 0x177
+#define KEY_PC 0x178 /* Media Select Computer */
+#define KEY_TV 0x179 /* Media Select TV */
+#define KEY_TV2 0x17a /* Media Select Cable */
+#define KEY_VCR 0x17b /* Media Select VCR */
+#define KEY_VCR2 0x17c /* VCR Plus */
+#define KEY_SAT 0x17d /* Media Select Satellite */
+#define KEY_SAT2 0x17e
+#define KEY_CD 0x17f /* Media Select CD */
+#define KEY_TAPE 0x180 /* Media Select Tape */
+#define KEY_RADIO 0x181
+#define KEY_TUNER 0x182 /* Media Select Tuner */
+#define KEY_PLAYER 0x183
+#define KEY_TEXT 0x184
+#define KEY_DVD 0x185 /* Media Select DVD */
+#define KEY_AUX 0x186
+#define KEY_MP3 0x187
+#define KEY_AUDIO 0x188 /* AL Audio Browser */
+#define KEY_VIDEO 0x189 /* AL Movie Browser */
+#define KEY_DIRECTORY 0x18a
+#define KEY_LIST 0x18b
+#define KEY_MEMO 0x18c /* Media Select Messages */
+#define KEY_CALENDAR 0x18d
+#define KEY_RED 0x18e
+#define KEY_GREEN 0x18f
+#define KEY_YELLOW 0x190
+#define KEY_BLUE 0x191
+#define KEY_CHANNELUP 0x192 /* Channel Increment */
+#define KEY_CHANNELDOWN 0x193 /* Channel Decrement */
+#define KEY_FIRST 0x194
+#define KEY_LAST 0x195 /* Recall Last */
+#define KEY_AB 0x196
+#define KEY_NEXT 0x197
+#define KEY_RESTART 0x198
+#define KEY_SLOW 0x199
+#define KEY_SHUFFLE 0x19a
+#define KEY_BREAK 0x19b
+#define KEY_PREVIOUS 0x19c
+#define KEY_DIGITS 0x19d
+#define KEY_TEEN 0x19e
+#define KEY_TWEN 0x19f
+#define KEY_VIDEOPHONE 0x1a0 /* Media Select Video Phone */
+#define KEY_GAMES 0x1a1 /* Media Select Games */
+#define KEY_ZOOMIN 0x1a2 /* AC Zoom In */
+#define KEY_ZOOMOUT 0x1a3 /* AC Zoom Out */
+#define KEY_ZOOMRESET 0x1a4 /* AC Zoom */
+#define KEY_WORDPROCESSOR 0x1a5 /* AL Word Processor */
+#define KEY_EDITOR 0x1a6 /* AL Text Editor */
+#define KEY_SPREADSHEET 0x1a7 /* AL Spreadsheet */
+#define KEY_GRAPHICSEDITOR 0x1a8 /* AL Graphics Editor */
+#define KEY_PRESENTATION 0x1a9 /* AL Presentation App */
+#define KEY_DATABASE 0x1aa /* AL Database App */
+#define KEY_NEWS 0x1ab /* AL Newsreader */
+#define KEY_VOICEMAIL 0x1ac /* AL Voicemail */
+#define KEY_ADDRESSBOOK 0x1ad /* AL Contacts/Address Book */
+#define KEY_MESSENGER 0x1ae /* AL Instant Messaging */
+#define KEY_DISPLAYTOGGLE 0x1af /* Turn display (LCD) on and off */
+#define KEY_SPELLCHECK 0x1b0 /* AL Spell Check */
+#define KEY_LOGOFF 0x1b1 /* AL Logoff */
+
+#define KEY_DOLLAR 0x1b2
+#define KEY_EURO 0x1b3
+
+#define KEY_FRAMEBACK 0x1b4 /* Consumer - transport controls */
+#define KEY_FRAMEFORWARD 0x1b5
+#define KEY_CONTEXT_MENU 0x1b6 /* GenDesc - system context menu */
+#define KEY_MEDIA_REPEAT 0x1b7 /* Consumer - transport control */
+#define KEY_10CHANNELSUP 0x1b8 /* 10 channels up (10+) */
+#define KEY_10CHANNELSDOWN 0x1b9 /* 10 channels down (10-) */
+#define KEY_IMAGES 0x1ba /* AL Image Browser */
+
+#define KEY_DEL_EOL 0x1c0
+#define KEY_DEL_EOS 0x1c1
+#define KEY_INS_LINE 0x1c2
+#define KEY_DEL_LINE 0x1c3
+
+#define KEY_FN 0x1d0
+#define KEY_FN_ESC 0x1d1
+#define KEY_FN_F1 0x1d2
+#define KEY_FN_F2 0x1d3
+#define KEY_FN_F3 0x1d4
+#define KEY_FN_F4 0x1d5
+#define KEY_FN_F5 0x1d6
+#define KEY_FN_F6 0x1d7
+#define KEY_FN_F7 0x1d8
+#define KEY_FN_F8 0x1d9
+#define KEY_FN_F9 0x1da
+#define KEY_FN_F10 0x1db
+#define KEY_FN_F11 0x1dc
+#define KEY_FN_F12 0x1dd
+#define KEY_FN_1 0x1de
+#define KEY_FN_2 0x1df
+#define KEY_FN_D 0x1e0
+#define KEY_FN_E 0x1e1
+#define KEY_FN_F 0x1e2
+#define KEY_FN_S 0x1e3
+#define KEY_FN_B 0x1e4
+
+#define KEY_BRL_DOT1 0x1f1
+#define KEY_BRL_DOT2 0x1f2
+#define KEY_BRL_DOT3 0x1f3
+#define KEY_BRL_DOT4 0x1f4
+#define KEY_BRL_DOT5 0x1f5
+#define KEY_BRL_DOT6 0x1f6
+#define KEY_BRL_DOT7 0x1f7
+#define KEY_BRL_DOT8 0x1f8
+#define KEY_BRL_DOT9 0x1f9
+#define KEY_BRL_DOT10 0x1fa
+
+#define KEY_NUMERIC_0 0x200 /* used by phones, remote controls, */
+#define KEY_NUMERIC_1 0x201 /* and other keypads */
+#define KEY_NUMERIC_2 0x202
+#define KEY_NUMERIC_3 0x203
+#define KEY_NUMERIC_4 0x204
+#define KEY_NUMERIC_5 0x205
+#define KEY_NUMERIC_6 0x206
+#define KEY_NUMERIC_7 0x207
+#define KEY_NUMERIC_8 0x208
+#define KEY_NUMERIC_9 0x209
+#define KEY_NUMERIC_STAR 0x20a
+#define KEY_NUMERIC_POUND 0x20b
+
+#define KEY_CAMERA_FOCUS 0x210
+#define KEY_WPS_BUTTON 0x211 /* WiFi Protected Setup key */
+
+#define KEY_TOUCHPAD_TOGGLE 0x212 /* Request switch touchpad on or off */
+#define KEY_TOUCHPAD_ON 0x213
+#define KEY_TOUCHPAD_OFF 0x214
+
+#define KEY_CAMERA_ZOOMIN 0x215
+#define KEY_CAMERA_ZOOMOUT 0x216
+#define KEY_CAMERA_UP 0x217
+#define KEY_CAMERA_DOWN 0x218
+#define KEY_CAMERA_LEFT 0x219
+#define KEY_CAMERA_RIGHT 0x21a
+
+#define BTN_TRIGGER_HAPPY 0x2c0
+#define BTN_TRIGGER_HAPPY1 0x2c0
+#define BTN_TRIGGER_HAPPY2 0x2c1
+#define BTN_TRIGGER_HAPPY3 0x2c2
+#define BTN_TRIGGER_HAPPY4 0x2c3
+#define BTN_TRIGGER_HAPPY5 0x2c4
+#define BTN_TRIGGER_HAPPY6 0x2c5
+#define BTN_TRIGGER_HAPPY7 0x2c6
+#define BTN_TRIGGER_HAPPY8 0x2c7
+#define BTN_TRIGGER_HAPPY9 0x2c8
+#define BTN_TRIGGER_HAPPY10 0x2c9
+#define BTN_TRIGGER_HAPPY11 0x2ca
+#define BTN_TRIGGER_HAPPY12 0x2cb
+#define BTN_TRIGGER_HAPPY13 0x2cc
+#define BTN_TRIGGER_HAPPY14 0x2cd
+#define BTN_TRIGGER_HAPPY15 0x2ce
+#define BTN_TRIGGER_HAPPY16 0x2cf
+#define BTN_TRIGGER_HAPPY17 0x2d0
+#define BTN_TRIGGER_HAPPY18 0x2d1
+#define BTN_TRIGGER_HAPPY19 0x2d2
+#define BTN_TRIGGER_HAPPY20 0x2d3
+#define BTN_TRIGGER_HAPPY21 0x2d4
+#define BTN_TRIGGER_HAPPY22 0x2d5
+#define BTN_TRIGGER_HAPPY23 0x2d6
+#define BTN_TRIGGER_HAPPY24 0x2d7
+#define BTN_TRIGGER_HAPPY25 0x2d8
+#define BTN_TRIGGER_HAPPY26 0x2d9
+#define BTN_TRIGGER_HAPPY27 0x2da
+#define BTN_TRIGGER_HAPPY28 0x2db
+#define BTN_TRIGGER_HAPPY29 0x2dc
+#define BTN_TRIGGER_HAPPY30 0x2dd
+#define BTN_TRIGGER_HAPPY31 0x2de
+#define BTN_TRIGGER_HAPPY32 0x2df
+#define BTN_TRIGGER_HAPPY33 0x2e0
+#define BTN_TRIGGER_HAPPY34 0x2e1
+#define BTN_TRIGGER_HAPPY35 0x2e2
+#define BTN_TRIGGER_HAPPY36 0x2e3
+#define BTN_TRIGGER_HAPPY37 0x2e4
+#define BTN_TRIGGER_HAPPY38 0x2e5
+#define BTN_TRIGGER_HAPPY39 0x2e6
+#define BTN_TRIGGER_HAPPY40 0x2e7
+
+/* We avoid low common keys in module aliases so they don't get huge. */
+#define KEY_MIN_INTERESTING KEY_MUTE
+#define KEY_MAX 0x2ff
+#define KEY_CNT (KEY_MAX+1)
+
+/*
+ * Relative axes
+ */
+
+#define REL_X 0x00
+#define REL_Y 0x01
+#define REL_Z 0x02
+#define REL_RX 0x03
+#define REL_RY 0x04
+#define REL_RZ 0x05
+#define REL_HWHEEL 0x06
+#define REL_DIAL 0x07
+#define REL_WHEEL 0x08
+#define REL_MISC 0x09
+#define REL_MAX 0x0f
+#define REL_CNT (REL_MAX+1)
+
+/*
+ * Absolute axes
+ */
+
+#define ABS_X 0x00
+#define ABS_Y 0x01
+#define ABS_Z 0x02
+#define ABS_RX 0x03
+#define ABS_RY 0x04
+#define ABS_RZ 0x05
+#define ABS_THROTTLE 0x06
+#define ABS_RUDDER 0x07
+#define ABS_WHEEL 0x08
+#define ABS_GAS 0x09
+#define ABS_BRAKE 0x0a
+#define ABS_HAT0X 0x10
+#define ABS_HAT0Y 0x11
+#define ABS_HAT1X 0x12
+#define ABS_HAT1Y 0x13
+#define ABS_HAT2X 0x14
+#define ABS_HAT2Y 0x15
+#define ABS_HAT3X 0x16
+#define ABS_HAT3Y 0x17
+#define ABS_PRESSURE 0x18
+#define ABS_DISTANCE 0x19
+#define ABS_TILT_X 0x1a
+#define ABS_TILT_Y 0x1b
+#define ABS_TOOL_WIDTH 0x1c
+
+#define ABS_VOLUME 0x20
+
+#define ABS_MISC 0x28
+
+#define ABS_MT_SLOT 0x2f /* MT slot being modified */
+#define ABS_MT_TOUCH_MAJOR 0x30 /* Major axis of touching ellipse */
+#define ABS_MT_TOUCH_MINOR 0x31 /* Minor axis (omit if circular) */
+#define ABS_MT_WIDTH_MAJOR 0x32 /* Major axis of approaching ellipse */
+#define ABS_MT_WIDTH_MINOR 0x33 /* Minor axis (omit if circular) */
+#define ABS_MT_ORIENTATION 0x34 /* Ellipse orientation */
+#define ABS_MT_POSITION_X 0x35 /* Center X touch position */
+#define ABS_MT_POSITION_Y 0x36 /* Center Y touch position */
+#define ABS_MT_TOOL_TYPE 0x37 /* Type of touching device */
+#define ABS_MT_BLOB_ID 0x38 /* Group a set of packets as a blob */
+#define ABS_MT_TRACKING_ID 0x39 /* Unique ID of initiated contact */
+#define ABS_MT_PRESSURE 0x3a /* Pressure on contact area */
+#define ABS_MT_DISTANCE 0x3b /* Contact hover distance */
+#define ABS_MT_TOOL_X 0x3c /* Center X tool position */
+#define ABS_MT_TOOL_Y 0x3d /* Center Y tool position */
+
+
+#define ABS_MAX 0x3f
+#define ABS_CNT (ABS_MAX+1)
+
+/*
+ * Switch events
+ */
+
+#define SW_LID 0x00 /* set = lid shut */
+#define SW_TABLET_MODE 0x01 /* set = tablet mode */
+#define SW_HEADPHONE_INSERT 0x02 /* set = inserted */
+#define SW_RFKILL_ALL 0x03 /* rfkill master switch, type "any"
+ set = radio enabled */
+#define SW_RADIO SW_RFKILL_ALL /* deprecated */
+#define SW_MICROPHONE_INSERT 0x04 /* set = inserted */
+#define SW_DOCK 0x05 /* set = plugged into dock */
+#define SW_LINEOUT_INSERT 0x06 /* set = inserted */
+#define SW_JACK_PHYSICAL_INSERT 0x07 /* set = mechanical switch set */
+#define SW_VIDEOOUT_INSERT 0x08 /* set = inserted */
+#define SW_CAMERA_LENS_COVER 0x09 /* set = lens covered */
+#define SW_KEYPAD_SLIDE 0x0a /* set = keypad slide out */
+#define SW_FRONT_PROXIMITY 0x0b /* set = front proximity sensor active */
+#define SW_ROTATE_LOCK 0x0c /* set = rotate locked/disabled */
+#define SW_LINEIN_INSERT 0x0d /* set = inserted */
+#define SW_MAX 0x0f
+#define SW_CNT (SW_MAX+1)
+
+/*
+ * Misc events
+ */
+
+#define MSC_SERIAL 0x00
+#define MSC_PULSELED 0x01
+#define MSC_GESTURE 0x02
+#define MSC_RAW 0x03
+#define MSC_SCAN 0x04
+#define MSC_MAX 0x07
+#define MSC_CNT (MSC_MAX+1)
+
+/*
+ * LEDs
+ */
+
+#define LED_NUML 0x00
+#define LED_CAPSL 0x01
+#define LED_SCROLLL 0x02
+#define LED_COMPOSE 0x03
+#define LED_KANA 0x04
+#define LED_SLEEP 0x05
+#define LED_SUSPEND 0x06
+#define LED_MUTE 0x07
+#define LED_MISC 0x08
+#define LED_MAIL 0x09
+#define LED_CHARGING 0x0a
+#define LED_MAX 0x0f
+#define LED_CNT (LED_MAX+1)
+
+/*
+ * Autorepeat values
+ */
+
+#define REP_DELAY 0x00
+#define REP_PERIOD 0x01
+#define REP_MAX 0x01
+#define REP_CNT (REP_MAX+1)
+
+/*
+ * Sounds
+ */
+
+#define SND_CLICK 0x00
+#define SND_BELL 0x01
+#define SND_TONE 0x02
+#define SND_MAX 0x07
+#define SND_CNT (SND_MAX+1)
+
+/*
+ * IDs.
+ */
+
+#define ID_BUS 0
+#define ID_VENDOR 1
+#define ID_PRODUCT 2
+#define ID_VERSION 3
+
+#define BUS_PCI 0x01
+#define BUS_ISAPNP 0x02
+#define BUS_USB 0x03
+#define BUS_HIL 0x04
+#define BUS_BLUETOOTH 0x05
+#define BUS_VIRTUAL 0x06
+
+#define BUS_ISA 0x10
+#define BUS_I8042 0x11
+#define BUS_XTKBD 0x12
+#define BUS_RS232 0x13
+#define BUS_GAMEPORT 0x14
+#define BUS_PARPORT 0x15
+#define BUS_AMIGA 0x16
+#define BUS_ADB 0x17
+#define BUS_I2C 0x18
+#define BUS_HOST 0x19
+#define BUS_GSC 0x1A
+#define BUS_ATARI 0x1B
+#define BUS_SPI 0x1C
+
+/*
+ * MT_TOOL types
+ */
+#define MT_TOOL_FINGER 0
+#define MT_TOOL_PEN 1
+#define MT_TOOL_MAX 1
+
+/*
+ * Values describing the status of a force-feedback effect
+ */
+#define FF_STATUS_STOPPED 0x00
+#define FF_STATUS_PLAYING 0x01
+#define FF_STATUS_MAX 0x01
+
+/*
+ * Structures used in ioctls to upload effects to a device
+ * They are pieces of a bigger structure (called ff_effect)
+ */
+
+/*
+ * All duration values are expressed in ms. Values above 32767 ms (0x7fff)
+ * should not be used and have unspecified results.
+ */
+
+/**
+ * struct ff_replay - defines scheduling of the force-feedback effect
+ * @length: duration of the effect
+ * @delay: delay before effect should start playing
+ */
+struct ff_replay {
+ __u16 length;
+ __u16 delay;
+};
+
+/**
+ * struct ff_trigger - defines what triggers the force-feedback effect
+ * @button: number of the button triggering the effect
+ * @interval: controls how soon the effect can be re-triggered
+ */
+struct ff_trigger {
+ __u16 button;
+ __u16 interval;
+};
+
+/**
+ * struct ff_envelope - generic force-feedback effect envelope
+ * @attack_length: duration of the attack (ms)
+ * @attack_level: level at the beginning of the attack
+ * @fade_length: duration of fade (ms)
+ * @fade_level: level at the end of fade
+ *
+ * The @attack_level and @fade_level are absolute values; when applying
+ * envelope force-feedback core will convert to positive/negative
+ * value based on polarity of the default level of the effect.
+ * Valid range for the attack and fade levels is 0x0000 - 0x7fff
+ */
+struct ff_envelope {
+ __u16 attack_length;
+ __u16 attack_level;
+ __u16 fade_length;
+ __u16 fade_level;
+};
+
+/**
+ * struct ff_constant_effect - defines parameters of a constant force-feedback effect
+ * @level: strength of the effect; may be negative
+ * @envelope: envelope data
+ */
+struct ff_constant_effect {
+ __s16 level;
+ struct ff_envelope envelope;
+};
+
+/**
+ * struct ff_ramp_effect - defines parameters of a ramp force-feedback effect
+ * @start_level: beginning strength of the effect; may be negative
+ * @end_level: final strength of the effect; may be negative
+ * @envelope: envelope data
+ */
+struct ff_ramp_effect {
+ __s16 start_level;
+ __s16 end_level;
+ struct ff_envelope envelope;
+};
+
+/**
+ * struct ff_condition_effect - defines a spring or friction force-feedback effect
+ * @right_saturation: maximum level when joystick moved all way to the right
+ * @left_saturation: same for the left side
+ * @right_coeff: controls how fast the force grows when the joystick moves
+ * to the right
+ * @left_coeff: same for the left side
+ * @deadband: size of the dead zone, where no force is produced
+ * @center: position of the dead zone
+ */
+struct ff_condition_effect {
+ __u16 right_saturation;
+ __u16 left_saturation;
+
+ __s16 right_coeff;
+ __s16 left_coeff;
+
+ __u16 deadband;
+ __s16 center;
+};
+
+/**
+ * struct ff_periodic_effect - defines parameters of a periodic force-feedback effect
+ * @waveform: kind of the effect (wave)
+ * @period: period of the wave (ms)
+ * @magnitude: peak value
+ * @offset: mean value of the wave (roughly)
+ * @phase: 'horizontal' shift
+ * @envelope: envelope data
+ * @custom_len: number of samples (FF_CUSTOM only)
+ * @custom_data: buffer of samples (FF_CUSTOM only)
+ *
+ * Known waveforms - FF_SQUARE, FF_TRIANGLE, FF_SINE, FF_SAW_UP,
+ * FF_SAW_DOWN, FF_CUSTOM. The exact syntax FF_CUSTOM is undefined
+ * for the time being as no driver supports it yet.
+ *
+ * Note: the data pointed by custom_data is copied by the driver.
+ * You can therefore dispose of the memory after the upload/update.
+ */
+struct ff_periodic_effect {
+ __u16 waveform;
+ __u16 period;
+ __s16 magnitude;
+ __s16 offset;
+ __u16 phase;
+
+ struct ff_envelope envelope;
+
+ __u32 custom_len;
+ __s16 __user *custom_data;
+};
+
+/**
+ * struct ff_rumble_effect - defines parameters of a periodic force-feedback effect
+ * @strong_magnitude: magnitude of the heavy motor
+ * @weak_magnitude: magnitude of the light one
+ *
+ * Some rumble pads have two motors of different weight. Strong_magnitude
+ * represents the magnitude of the vibration generated by the heavy one.
+ */
+struct ff_rumble_effect {
+ __u16 strong_magnitude;
+ __u16 weak_magnitude;
+};
+
+/**
+ * struct ff_effect - defines force feedback effect
+ * @type: type of the effect (FF_CONSTANT, FF_PERIODIC, FF_RAMP, FF_SPRING,
+ * FF_FRICTION, FF_DAMPER, FF_RUMBLE, FF_INERTIA, or FF_CUSTOM)
+ * @id: an unique id assigned to an effect
+ * @direction: direction of the effect
+ * @trigger: trigger conditions (struct ff_trigger)
+ * @replay: scheduling of the effect (struct ff_replay)
+ * @u: effect-specific structure (one of ff_constant_effect, ff_ramp_effect,
+ * ff_periodic_effect, ff_condition_effect, ff_rumble_effect) further
+ * defining effect parameters
+ *
+ * This structure is sent through ioctl from the application to the driver.
+ * To create a new effect application should set its @id to -1; the kernel
+ * will return assigned @id which can later be used to update or delete
+ * this effect.
+ *
+ * Direction of the effect is encoded as follows:
+ * 0 deg -> 0x0000 (down)
+ * 90 deg -> 0x4000 (left)
+ * 180 deg -> 0x8000 (up)
+ * 270 deg -> 0xC000 (right)
+ */
+struct ff_effect {
+ __u16 type;
+ __s16 id;
+ __u16 direction;
+ struct ff_trigger trigger;
+ struct ff_replay replay;
+
+ union {
+ struct ff_constant_effect constant;
+ struct ff_ramp_effect ramp;
+ struct ff_periodic_effect periodic;
+ struct ff_condition_effect condition[2]; /* One for each axis */
+ struct ff_rumble_effect rumble;
+ } u;
+};
+
+/*
+ * Force feedback effect types
+ */
+
+#define FF_RUMBLE 0x50
+#define FF_PERIODIC 0x51
+#define FF_CONSTANT 0x52
+#define FF_SPRING 0x53
+#define FF_FRICTION 0x54
+#define FF_DAMPER 0x55
+#define FF_INERTIA 0x56
+#define FF_RAMP 0x57
+
+#define FF_EFFECT_MIN FF_RUMBLE
+#define FF_EFFECT_MAX FF_RAMP
+
+/*
+ * Force feedback periodic effect types
+ */
+
+#define FF_SQUARE 0x58
+#define FF_TRIANGLE 0x59
+#define FF_SINE 0x5a
+#define FF_SAW_UP 0x5b
+#define FF_SAW_DOWN 0x5c
+#define FF_CUSTOM 0x5d
+
+#define FF_WAVEFORM_MIN FF_SQUARE
+#define FF_WAVEFORM_MAX FF_CUSTOM
+
+/*
+ * Set ff device properties
+ */
+
+#define FF_GAIN 0x60
+#define FF_AUTOCENTER 0x61
+
+#define FF_MAX 0x7f
+#define FF_CNT (FF_MAX+1)
+
+#endif /* _UAPI_INPUT_H */
diff --git a/include/linux/ioctl.h b/include/uapi/linux/ioctl.h
similarity index 100%
rename from include/linux/ioctl.h
rename to include/uapi/linux/ioctl.h
diff --git a/include/uapi/linux/ip.h b/include/uapi/linux/ip.h
new file mode 100644
index 0000000..6cf06bf
--- /dev/null
+++ b/include/uapi/linux/ip.h
@@ -0,0 +1,136 @@
+/*
+ * INET An implementation of the TCP/IP protocol suite for the LINUX
+ * operating system. INET is implemented using the BSD Socket
+ * interface as the means of communication with the user level.
+ *
+ * Definitions for the IP protocol.
+ *
+ * Version: @(#)ip.h 1.0.2 04/28/93
+ *
+ * Authors: Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _UAPI_LINUX_IP_H
+#define _UAPI_LINUX_IP_H
+#include <linux/types.h>
+#include <asm/byteorder.h>
+
+#define IPTOS_TOS_MASK 0x1E
+#define IPTOS_TOS(tos) ((tos)&IPTOS_TOS_MASK)
+#define IPTOS_LOWDELAY 0x10
+#define IPTOS_THROUGHPUT 0x08
+#define IPTOS_RELIABILITY 0x04
+#define IPTOS_MINCOST 0x02
+
+#define IPTOS_PREC_MASK 0xE0
+#define IPTOS_PREC(tos) ((tos)&IPTOS_PREC_MASK)
+#define IPTOS_PREC_NETCONTROL 0xe0
+#define IPTOS_PREC_INTERNETCONTROL 0xc0
+#define IPTOS_PREC_CRITIC_ECP 0xa0
+#define IPTOS_PREC_FLASHOVERRIDE 0x80
+#define IPTOS_PREC_FLASH 0x60
+#define IPTOS_PREC_IMMEDIATE 0x40
+#define IPTOS_PREC_PRIORITY 0x20
+#define IPTOS_PREC_ROUTINE 0x00
+
+
+/* IP options */
+#define IPOPT_COPY 0x80
+#define IPOPT_CLASS_MASK 0x60
+#define IPOPT_NUMBER_MASK 0x1f
+
+#define IPOPT_COPIED(o) ((o)&IPOPT_COPY)
+#define IPOPT_CLASS(o) ((o)&IPOPT_CLASS_MASK)
+#define IPOPT_NUMBER(o) ((o)&IPOPT_NUMBER_MASK)
+
+#define IPOPT_CONTROL 0x00
+#define IPOPT_RESERVED1 0x20
+#define IPOPT_MEASUREMENT 0x40
+#define IPOPT_RESERVED2 0x60
+
+#define IPOPT_END (0 |IPOPT_CONTROL)
+#define IPOPT_NOOP (1 |IPOPT_CONTROL)
+#define IPOPT_SEC (2 |IPOPT_CONTROL|IPOPT_COPY)
+#define IPOPT_LSRR (3 |IPOPT_CONTROL|IPOPT_COPY)
+#define IPOPT_TIMESTAMP (4 |IPOPT_MEASUREMENT)
+#define IPOPT_CIPSO (6 |IPOPT_CONTROL|IPOPT_COPY)
+#define IPOPT_RR (7 |IPOPT_CONTROL)
+#define IPOPT_SID (8 |IPOPT_CONTROL|IPOPT_COPY)
+#define IPOPT_SSRR (9 |IPOPT_CONTROL|IPOPT_COPY)
+#define IPOPT_RA (20|IPOPT_CONTROL|IPOPT_COPY)
+
+#define IPVERSION 4
+#define MAXTTL 255
+#define IPDEFTTL 64
+
+#define IPOPT_OPTVAL 0
+#define IPOPT_OLEN 1
+#define IPOPT_OFFSET 2
+#define IPOPT_MINOFF 4
+#define MAX_IPOPTLEN 40
+#define IPOPT_NOP IPOPT_NOOP
+#define IPOPT_EOL IPOPT_END
+#define IPOPT_TS IPOPT_TIMESTAMP
+
+#define IPOPT_TS_TSONLY 0 /* timestamps only */
+#define IPOPT_TS_TSANDADDR 1 /* timestamps and addresses */
+#define IPOPT_TS_PRESPEC 3 /* specified modules only */
+
+#define IPV4_BEET_PHMAXLEN 8
+
+struct iphdr {
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+ __u8 ihl:4,
+ version:4;
+#elif defined (__BIG_ENDIAN_BITFIELD)
+ __u8 version:4,
+ ihl:4;
+#else
+#error "Please fix <asm/byteorder.h>"
+#endif
+ __u8 tos;
+ __be16 tot_len;
+ __be16 id;
+ __be16 frag_off;
+ __u8 ttl;
+ __u8 protocol;
+ __sum16 check;
+ __be32 saddr;
+ __be32 daddr;
+ /*The options start here. */
+};
+
+
+struct ip_auth_hdr {
+ __u8 nexthdr;
+ __u8 hdrlen; /* This one is measured in 32 bit units! */
+ __be16 reserved;
+ __be32 spi;
+ __be32 seq_no; /* Sequence number */
+ __u8 auth_data[0]; /* Variable len but >=4. Mind the 64 bit alignment! */
+};
+
+struct ip_esp_hdr {
+ __be32 spi;
+ __be32 seq_no; /* Sequence number */
+ __u8 enc_data[0]; /* Variable len but >=8. Mind the 64 bit alignment! */
+};
+
+struct ip_comp_hdr {
+ __u8 nexthdr;
+ __u8 flags;
+ __be16 cpi;
+};
+
+struct ip_beet_phdr {
+ __u8 nexthdr;
+ __u8 hdrlen;
+ __u8 padlen;
+ __u8 reserved;
+};
+
+#endif /* _UAPI_LINUX_IP_H */
diff --git a/include/linux/ip6_tunnel.h b/include/uapi/linux/ip6_tunnel.h
similarity index 100%
rename from include/linux/ip6_tunnel.h
rename to include/uapi/linux/ip6_tunnel.h
diff --git a/include/linux/ip_vs.h b/include/uapi/linux/ip_vs.h
similarity index 100%
rename from include/linux/ip_vs.h
rename to include/uapi/linux/ip_vs.h
diff --git a/include/uapi/linux/ipc.h b/include/uapi/linux/ipc.h
new file mode 100644
index 0000000..de08dd4
--- /dev/null
+++ b/include/uapi/linux/ipc.h
@@ -0,0 +1,81 @@
+#ifndef _UAPI_LINUX_IPC_H
+#define _UAPI_LINUX_IPC_H
+
+#include <linux/types.h>
+
+#define IPC_PRIVATE ((__kernel_key_t) 0)
+
+/* Obsolete, used only for backwards compatibility and libc5 compiles */
+struct ipc_perm
+{
+ __kernel_key_t key;
+ __kernel_uid_t uid;
+ __kernel_gid_t gid;
+ __kernel_uid_t cuid;
+ __kernel_gid_t cgid;
+ __kernel_mode_t mode;
+ unsigned short seq;
+};
+
+/* Include the definition of ipc64_perm */
+#include <asm/ipcbuf.h>
+
+/* resource get request flags */
+#define IPC_CREAT 00001000 /* create if key is nonexistent */
+#define IPC_EXCL 00002000 /* fail if key exists */
+#define IPC_NOWAIT 00004000 /* return error on wait */
+
+/* these fields are used by the DIPC package so the kernel as standard
+ should avoid using them if possible */
+
+#define IPC_DIPC 00010000 /* make it distributed */
+#define IPC_OWN 00020000 /* this machine is the DIPC owner */
+
+/*
+ * Control commands used with semctl, msgctl and shmctl
+ * see also specific commands in sem.h, msg.h and shm.h
+ */
+#define IPC_RMID 0 /* remove resource */
+#define IPC_SET 1 /* set ipc_perm options */
+#define IPC_STAT 2 /* get ipc_perm options */
+#define IPC_INFO 3 /* see ipcs */
+
+/*
+ * Version flags for semctl, msgctl, and shmctl commands
+ * These are passed as bitflags or-ed with the actual command
+ */
+#define IPC_OLD 0 /* Old version (no 32-bit UID support on many
+ architectures) */
+#define IPC_64 0x0100 /* New version (support 32-bit UIDs, bigger
+ message sizes, etc. */
+
+/*
+ * These are used to wrap system calls.
+ *
+ * See architecture code for ugly details..
+ */
+struct ipc_kludge {
+ struct msgbuf __user *msgp;
+ long msgtyp;
+};
+
+#define SEMOP 1
+#define SEMGET 2
+#define SEMCTL 3
+#define SEMTIMEDOP 4
+#define MSGSND 11
+#define MSGRCV 12
+#define MSGGET 13
+#define MSGCTL 14
+#define SHMAT 21
+#define SHMDT 22
+#define SHMGET 23
+#define SHMCTL 24
+
+/* Used by the DIPC package, try and avoid reusing it */
+#define DIPC 25
+
+#define IPCCALL(version,op) ((version)<<16 | (op))
+
+
+#endif /* _UAPI_LINUX_IPC_H */
diff --git a/include/uapi/linux/ipmi.h b/include/uapi/linux/ipmi.h
new file mode 100644
index 0000000..33fbc99
--- /dev/null
+++ b/include/uapi/linux/ipmi.h
@@ -0,0 +1,456 @@
+/*
+ * ipmi.h
+ *
+ * MontaVista IPMI interface
+ *
+ * Author: MontaVista Software, Inc.
+ * Corey Minyard <minyard@mvista.com>
+ * source@mvista.com
+ *
+ * Copyright 2002 MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+ * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+ * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _UAPI__LINUX_IPMI_H
+#define _UAPI__LINUX_IPMI_H
+
+#include <linux/ipmi_msgdefs.h>
+#include <linux/compiler.h>
+
+/*
+ * This file describes an interface to an IPMI driver. You have to
+ * have a fairly good understanding of IPMI to use this, so go read
+ * the specs first before actually trying to do anything.
+ *
+ * With that said, this driver provides a multi-user interface to the
+ * IPMI driver, and it allows multiple IPMI physical interfaces below
+ * the driver. The physical interfaces bind as a lower layer on the
+ * driver. They appear as interfaces to the application using this
+ * interface.
+ *
+ * Multi-user means that multiple applications may use the driver,
+ * send commands, receive responses, etc. The driver keeps track of
+ * commands the user sends and tracks the responses. The responses
+ * will go back to the application that send the command. If the
+ * response doesn't come back in time, the driver will return a
+ * timeout error response to the application. Asynchronous events
+ * from the BMC event queue will go to all users bound to the driver.
+ * The incoming event queue in the BMC will automatically be flushed
+ * if it becomes full and it is queried once a second to see if
+ * anything is in it. Incoming commands to the driver will get
+ * delivered as commands.
+ *
+ * This driver provides two main interfaces: one for in-kernel
+ * applications and another for userland applications. The
+ * capabilities are basically the same for both interface, although
+ * the interfaces are somewhat different. The stuff in the
+ * #ifdef __KERNEL__ below is the in-kernel interface. The userland
+ * interface is defined later in the file. */
+
+
+
+/*
+ * This is an overlay for all the address types, so it's easy to
+ * determine the actual address type. This is kind of like addresses
+ * work for sockets.
+ */
+#define IPMI_MAX_ADDR_SIZE 32
+struct ipmi_addr {
+ /* Try to take these from the "Channel Medium Type" table
+ in section 6.5 of the IPMI 1.5 manual. */
+ int addr_type;
+ short channel;
+ char data[IPMI_MAX_ADDR_SIZE];
+};
+
+/*
+ * When the address is not used, the type will be set to this value.
+ * The channel is the BMC's channel number for the channel (usually
+ * 0), or IPMC_BMC_CHANNEL if communicating directly with the BMC.
+ */
+#define IPMI_SYSTEM_INTERFACE_ADDR_TYPE 0x0c
+struct ipmi_system_interface_addr {
+ int addr_type;
+ short channel;
+ unsigned char lun;
+};
+
+/* An IPMB Address. */
+#define IPMI_IPMB_ADDR_TYPE 0x01
+/* Used for broadcast get device id as described in section 17.9 of the
+ IPMI 1.5 manual. */
+#define IPMI_IPMB_BROADCAST_ADDR_TYPE 0x41
+struct ipmi_ipmb_addr {
+ int addr_type;
+ short channel;
+ unsigned char slave_addr;
+ unsigned char lun;
+};
+
+/*
+ * A LAN Address. This is an address to/from a LAN interface bridged
+ * by the BMC, not an address actually out on the LAN.
+ *
+ * A conscious decision was made here to deviate slightly from the IPMI
+ * spec. We do not use rqSWID and rsSWID like it shows in the
+ * message. Instead, we use remote_SWID and local_SWID. This means
+ * that any message (a request or response) from another device will
+ * always have exactly the same address. If you didn't do this,
+ * requests and responses from the same device would have different
+ * addresses, and that's not too cool.
+ *
+ * In this address, the remote_SWID is always the SWID the remote
+ * message came from, or the SWID we are sending the message to.
+ * local_SWID is always our SWID. Note that having our SWID in the
+ * message is a little weird, but this is required.
+ */
+#define IPMI_LAN_ADDR_TYPE 0x04
+struct ipmi_lan_addr {
+ int addr_type;
+ short channel;
+ unsigned char privilege;
+ unsigned char session_handle;
+ unsigned char remote_SWID;
+ unsigned char local_SWID;
+ unsigned char lun;
+};
+
+
+/*
+ * Channel for talking directly with the BMC. When using this
+ * channel, This is for the system interface address type only. FIXME
+ * - is this right, or should we use -1?
+ */
+#define IPMI_BMC_CHANNEL 0xf
+#define IPMI_NUM_CHANNELS 0x10
+
+/*
+ * Used to signify an "all channel" bitmask. This is more than the
+ * actual number of channels because this is used in userland and
+ * will cover us if the number of channels is extended.
+ */
+#define IPMI_CHAN_ALL (~0)
+
+
+/*
+ * A raw IPMI message without any addressing. This covers both
+ * commands and responses. The completion code is always the first
+ * byte of data in the response (as the spec shows the messages laid
+ * out).
+ */
+struct ipmi_msg {
+ unsigned char netfn;
+ unsigned char cmd;
+ unsigned short data_len;
+ unsigned char __user *data;
+};
+
+struct kernel_ipmi_msg {
+ unsigned char netfn;
+ unsigned char cmd;
+ unsigned short data_len;
+ unsigned char *data;
+};
+
+/*
+ * Various defines that are useful for IPMI applications.
+ */
+#define IPMI_INVALID_CMD_COMPLETION_CODE 0xC1
+#define IPMI_TIMEOUT_COMPLETION_CODE 0xC3
+#define IPMI_UNKNOWN_ERR_COMPLETION_CODE 0xff
+
+
+/*
+ * Receive types for messages coming from the receive interface. This
+ * is used for the receive in-kernel interface and in the receive
+ * IOCTL.
+ *
+ * The "IPMI_RESPONSE_RESPNOSE_TYPE" is a little strange sounding, but
+ * it allows you to get the message results when you send a response
+ * message.
+ */
+#define IPMI_RESPONSE_RECV_TYPE 1 /* A response to a command */
+#define IPMI_ASYNC_EVENT_RECV_TYPE 2 /* Something from the event queue */
+#define IPMI_CMD_RECV_TYPE 3 /* A command from somewhere else */
+#define IPMI_RESPONSE_RESPONSE_TYPE 4 /* The response for
+ a sent response, giving any
+ error status for sending the
+ response. When you send a
+ response message, this will
+ be returned. */
+#define IPMI_OEM_RECV_TYPE 5 /* The response for OEM Channels */
+
+/* Note that async events and received commands do not have a completion
+ code as the first byte of the incoming data, unlike a response. */
+
+
+/*
+ * Modes for ipmi_set_maint_mode() and the userland IOCTL. The AUTO
+ * setting is the default and means it will be set on certain
+ * commands. Hard setting it on and off will override automatic
+ * operation.
+ */
+#define IPMI_MAINTENANCE_MODE_AUTO 0
+#define IPMI_MAINTENANCE_MODE_OFF 1
+#define IPMI_MAINTENANCE_MODE_ON 2
+
+
+
+/*
+ * The userland interface
+ */
+
+/*
+ * The userland interface for the IPMI driver is a standard character
+ * device, with each instance of an interface registered as a minor
+ * number under the major character device.
+ *
+ * The read and write calls do not work, to get messages in and out
+ * requires ioctl calls because of the complexity of the data. select
+ * and poll do work, so you can wait for input using the file
+ * descriptor, you just can use read to get it.
+ *
+ * In general, you send a command down to the interface and receive
+ * responses back. You can use the msgid value to correlate commands
+ * and responses, the driver will take care of figuring out which
+ * incoming messages are for which command and find the proper msgid
+ * value to report. You will only receive reponses for commands you
+ * send. Asynchronous events, however, go to all open users, so you
+ * must be ready to handle these (or ignore them if you don't care).
+ *
+ * The address type depends upon the channel type. When talking
+ * directly to the BMC (IPMC_BMC_CHANNEL), the address is ignored
+ * (IPMI_UNUSED_ADDR_TYPE). When talking to an IPMB channel, you must
+ * supply a valid IPMB address with the addr_type set properly.
+ *
+ * When talking to normal channels, the driver takes care of the
+ * details of formatting and sending messages on that channel. You do
+ * not, for instance, have to format a send command, you just send
+ * whatever command you want to the channel, the driver will create
+ * the send command, automatically issue receive command and get even
+ * commands, and pass those up to the proper user.
+ */
+
+
+/* The magic IOCTL value for this interface. */
+#define IPMI_IOC_MAGIC 'i'
+
+
+/* Messages sent to the interface are this format. */
+struct ipmi_req {
+ unsigned char __user *addr; /* Address to send the message to. */
+ unsigned int addr_len;
+
+ long msgid; /* The sequence number for the message. This
+ exact value will be reported back in the
+ response to this request if it is a command.
+ If it is a response, this will be used as
+ the sequence value for the response. */
+
+ struct ipmi_msg msg;
+};
+/*
+ * Send a message to the interfaces. error values are:
+ * - EFAULT - an address supplied was invalid.
+ * - EINVAL - The address supplied was not valid, or the command
+ * was not allowed.
+ * - EMSGSIZE - The message to was too large.
+ * - ENOMEM - Buffers could not be allocated for the command.
+ */
+#define IPMICTL_SEND_COMMAND _IOR(IPMI_IOC_MAGIC, 13, \
+ struct ipmi_req)
+
+/* Messages sent to the interface with timing parameters are this
+ format. */
+struct ipmi_req_settime {
+ struct ipmi_req req;
+
+ /* See ipmi_request_settime() above for details on these
+ values. */
+ int retries;
+ unsigned int retry_time_ms;
+};
+/*
+ * Send a message to the interfaces with timing parameters. error values
+ * are:
+ * - EFAULT - an address supplied was invalid.
+ * - EINVAL - The address supplied was not valid, or the command
+ * was not allowed.
+ * - EMSGSIZE - The message to was too large.
+ * - ENOMEM - Buffers could not be allocated for the command.
+ */
+#define IPMICTL_SEND_COMMAND_SETTIME _IOR(IPMI_IOC_MAGIC, 21, \
+ struct ipmi_req_settime)
+
+/* Messages received from the interface are this format. */
+struct ipmi_recv {
+ int recv_type; /* Is this a command, response or an
+ asyncronous event. */
+
+ unsigned char __user *addr; /* Address the message was from is put
+ here. The caller must supply the
+ memory. */
+ unsigned int addr_len; /* The size of the address buffer.
+ The caller supplies the full buffer
+ length, this value is updated to
+ the actual message length when the
+ message is received. */
+
+ long msgid; /* The sequence number specified in the request
+ if this is a response. If this is a command,
+ this will be the sequence number from the
+ command. */
+
+ struct ipmi_msg msg; /* The data field must point to a buffer.
+ The data_size field must be set to the
+ size of the message buffer. The
+ caller supplies the full buffer
+ length, this value is updated to the
+ actual message length when the message
+ is received. */
+};
+
+/*
+ * Receive a message. error values:
+ * - EAGAIN - no messages in the queue.
+ * - EFAULT - an address supplied was invalid.
+ * - EINVAL - The address supplied was not valid.
+ * - EMSGSIZE - The message to was too large to fit into the message buffer,
+ * the message will be left in the buffer. */
+#define IPMICTL_RECEIVE_MSG _IOWR(IPMI_IOC_MAGIC, 12, \
+ struct ipmi_recv)
+
+/*
+ * Like RECEIVE_MSG, but if the message won't fit in the buffer, it
+ * will truncate the contents instead of leaving the data in the
+ * buffer.
+ */
+#define IPMICTL_RECEIVE_MSG_TRUNC _IOWR(IPMI_IOC_MAGIC, 11, \
+ struct ipmi_recv)
+
+/* Register to get commands from other entities on this interface. */
+struct ipmi_cmdspec {
+ unsigned char netfn;
+ unsigned char cmd;
+};
+
+/*
+ * Register to receive a specific command. error values:
+ * - EFAULT - an address supplied was invalid.
+ * - EBUSY - The netfn/cmd supplied was already in use.
+ * - ENOMEM - could not allocate memory for the entry.
+ */
+#define IPMICTL_REGISTER_FOR_CMD _IOR(IPMI_IOC_MAGIC, 14, \
+ struct ipmi_cmdspec)
+/*
+ * Unregister a regsitered command. error values:
+ * - EFAULT - an address supplied was invalid.
+ * - ENOENT - The netfn/cmd was not found registered for this user.
+ */
+#define IPMICTL_UNREGISTER_FOR_CMD _IOR(IPMI_IOC_MAGIC, 15, \
+ struct ipmi_cmdspec)
+
+/*
+ * Register to get commands from other entities on specific channels.
+ * This way, you can only listen on specific channels, or have messages
+ * from some channels go to one place and other channels to someplace
+ * else. The chans field is a bitmask, (1 << channel) for each channel.
+ * It may be IPMI_CHAN_ALL for all channels.
+ */
+struct ipmi_cmdspec_chans {
+ unsigned int netfn;
+ unsigned int cmd;
+ unsigned int chans;
+};
+
+/*
+ * Register to receive a specific command on specific channels. error values:
+ * - EFAULT - an address supplied was invalid.
+ * - EBUSY - One of the netfn/cmd/chans supplied was already in use.
+ * - ENOMEM - could not allocate memory for the entry.
+ */
+#define IPMICTL_REGISTER_FOR_CMD_CHANS _IOR(IPMI_IOC_MAGIC, 28, \
+ struct ipmi_cmdspec_chans)
+/*
+ * Unregister some netfn/cmd/chans. error values:
+ * - EFAULT - an address supplied was invalid.
+ * - ENOENT - None of the netfn/cmd/chans were found registered for this user.
+ */
+#define IPMICTL_UNREGISTER_FOR_CMD_CHANS _IOR(IPMI_IOC_MAGIC, 29, \
+ struct ipmi_cmdspec_chans)
+
+/*
+ * Set whether this interface receives events. Note that the first
+ * user registered for events will get all pending events for the
+ * interface. error values:
+ * - EFAULT - an address supplied was invalid.
+ */
+#define IPMICTL_SET_GETS_EVENTS_CMD _IOR(IPMI_IOC_MAGIC, 16, int)
+
+/*
+ * Set and get the slave address and LUN that we will use for our
+ * source messages. Note that this affects the interface, not just
+ * this user, so it will affect all users of this interface. This is
+ * so some initialization code can come in and do the OEM-specific
+ * things it takes to determine your address (if not the BMC) and set
+ * it for everyone else. You should probably leave the LUN alone.
+ */
+struct ipmi_channel_lun_address_set {
+ unsigned short channel;
+ unsigned char value;
+};
+#define IPMICTL_SET_MY_CHANNEL_ADDRESS_CMD \
+ _IOR(IPMI_IOC_MAGIC, 24, struct ipmi_channel_lun_address_set)
+#define IPMICTL_GET_MY_CHANNEL_ADDRESS_CMD \
+ _IOR(IPMI_IOC_MAGIC, 25, struct ipmi_channel_lun_address_set)
+#define IPMICTL_SET_MY_CHANNEL_LUN_CMD \
+ _IOR(IPMI_IOC_MAGIC, 26, struct ipmi_channel_lun_address_set)
+#define IPMICTL_GET_MY_CHANNEL_LUN_CMD \
+ _IOR(IPMI_IOC_MAGIC, 27, struct ipmi_channel_lun_address_set)
+/* Legacy interfaces, these only set IPMB 0. */
+#define IPMICTL_SET_MY_ADDRESS_CMD _IOR(IPMI_IOC_MAGIC, 17, unsigned int)
+#define IPMICTL_GET_MY_ADDRESS_CMD _IOR(IPMI_IOC_MAGIC, 18, unsigned int)
+#define IPMICTL_SET_MY_LUN_CMD _IOR(IPMI_IOC_MAGIC, 19, unsigned int)
+#define IPMICTL_GET_MY_LUN_CMD _IOR(IPMI_IOC_MAGIC, 20, unsigned int)
+
+/*
+ * Get/set the default timing values for an interface. You shouldn't
+ * generally mess with these.
+ */
+struct ipmi_timing_parms {
+ int retries;
+ unsigned int retry_time_ms;
+};
+#define IPMICTL_SET_TIMING_PARMS_CMD _IOR(IPMI_IOC_MAGIC, 22, \
+ struct ipmi_timing_parms)
+#define IPMICTL_GET_TIMING_PARMS_CMD _IOR(IPMI_IOC_MAGIC, 23, \
+ struct ipmi_timing_parms)
+
+/*
+ * Set the maintenance mode. See ipmi_set_maintenance_mode() above
+ * for a description of what this does.
+ */
+#define IPMICTL_GET_MAINTENANCE_MODE_CMD _IOR(IPMI_IOC_MAGIC, 30, int)
+#define IPMICTL_SET_MAINTENANCE_MODE_CMD _IOW(IPMI_IOC_MAGIC, 31, int)
+
+#endif /* _UAPI__LINUX_IPMI_H */
diff --git a/include/linux/ipmi_msgdefs.h b/include/uapi/linux/ipmi_msgdefs.h
similarity index 100%
rename from include/linux/ipmi_msgdefs.h
rename to include/uapi/linux/ipmi_msgdefs.h
diff --git a/include/linux/ipsec.h b/include/uapi/linux/ipsec.h
similarity index 100%
rename from include/linux/ipsec.h
rename to include/uapi/linux/ipsec.h
diff --git a/include/uapi/linux/ipv6.h b/include/uapi/linux/ipv6.h
new file mode 100644
index 0000000..a6d7d1c
--- /dev/null
+++ b/include/uapi/linux/ipv6.h
@@ -0,0 +1,164 @@
+#ifndef _UAPI_IPV6_H
+#define _UAPI_IPV6_H
+
+#include <linux/types.h>
+#include <linux/in6.h>
+#include <asm/byteorder.h>
+
+/* The latest drafts declared increase in minimal mtu up to 1280. */
+
+#define IPV6_MIN_MTU 1280
+
+/*
+ * Advanced API
+ * source interface/address selection, source routing, etc...
+ * *under construction*
+ */
+
+
+struct in6_pktinfo {
+ struct in6_addr ipi6_addr;
+ int ipi6_ifindex;
+};
+
+struct ip6_mtuinfo {
+ struct sockaddr_in6 ip6m_addr;
+ __u32 ip6m_mtu;
+};
+
+struct in6_ifreq {
+ struct in6_addr ifr6_addr;
+ __u32 ifr6_prefixlen;
+ int ifr6_ifindex;
+};
+
+#define IPV6_SRCRT_STRICT 0x01 /* Deprecated; will be removed */
+#define IPV6_SRCRT_TYPE_0 0 /* Deprecated; will be removed */
+#define IPV6_SRCRT_TYPE_2 2 /* IPv6 type 2 Routing Header */
+
+/*
+ * routing header
+ */
+struct ipv6_rt_hdr {
+ __u8 nexthdr;
+ __u8 hdrlen;
+ __u8 type;
+ __u8 segments_left;
+
+ /*
+ * type specific data
+ * variable length field
+ */
+};
+
+
+struct ipv6_opt_hdr {
+ __u8 nexthdr;
+ __u8 hdrlen;
+ /*
+ * TLV encoded option data follows.
+ */
+} __attribute__((packed)); /* required for some archs */
+
+#define ipv6_destopt_hdr ipv6_opt_hdr
+#define ipv6_hopopt_hdr ipv6_opt_hdr
+
+
+/*
+ * routing header type 0 (used in cmsghdr struct)
+ */
+
+struct rt0_hdr {
+ struct ipv6_rt_hdr rt_hdr;
+ __u32 reserved;
+ struct in6_addr addr[0];
+
+#define rt0_type rt_hdr.type
+};
+
+/*
+ * routing header type 2
+ */
+
+struct rt2_hdr {
+ struct ipv6_rt_hdr rt_hdr;
+ __u32 reserved;
+ struct in6_addr addr;
+
+#define rt2_type rt_hdr.type
+};
+
+/*
+ * home address option in destination options header
+ */
+
+struct ipv6_destopt_hao {
+ __u8 type;
+ __u8 length;
+ struct in6_addr addr;
+} __attribute__((packed));
+
+/*
+ * IPv6 fixed header
+ *
+ * BEWARE, it is incorrect. The first 4 bits of flow_lbl
+ * are glued to priority now, forming "class".
+ */
+
+struct ipv6hdr {
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+ __u8 priority:4,
+ version:4;
+#elif defined(__BIG_ENDIAN_BITFIELD)
+ __u8 version:4,
+ priority:4;
+#else
+#error "Please fix <asm/byteorder.h>"
+#endif
+ __u8 flow_lbl[3];
+
+ __be16 payload_len;
+ __u8 nexthdr;
+ __u8 hop_limit;
+
+ struct in6_addr saddr;
+ struct in6_addr daddr;
+};
+
+
+/* index values for the variables in ipv6_devconf */
+enum {
+ DEVCONF_FORWARDING = 0,
+ DEVCONF_HOPLIMIT,
+ DEVCONF_MTU6,
+ DEVCONF_ACCEPT_RA,
+ DEVCONF_ACCEPT_REDIRECTS,
+ DEVCONF_AUTOCONF,
+ DEVCONF_DAD_TRANSMITS,
+ DEVCONF_RTR_SOLICITS,
+ DEVCONF_RTR_SOLICIT_INTERVAL,
+ DEVCONF_RTR_SOLICIT_DELAY,
+ DEVCONF_USE_TEMPADDR,
+ DEVCONF_TEMP_VALID_LFT,
+ DEVCONF_TEMP_PREFERED_LFT,
+ DEVCONF_REGEN_MAX_RETRY,
+ DEVCONF_MAX_DESYNC_FACTOR,
+ DEVCONF_MAX_ADDRESSES,
+ DEVCONF_FORCE_MLD_VERSION,
+ DEVCONF_ACCEPT_RA_DEFRTR,
+ DEVCONF_ACCEPT_RA_PINFO,
+ DEVCONF_ACCEPT_RA_RTR_PREF,
+ DEVCONF_RTR_PROBE_INTERVAL,
+ DEVCONF_ACCEPT_RA_RT_INFO_MAX_PLEN,
+ DEVCONF_PROXY_NDP,
+ DEVCONF_OPTIMISTIC_DAD,
+ DEVCONF_ACCEPT_SOURCE_ROUTE,
+ DEVCONF_MC_FORWARDING,
+ DEVCONF_DISABLE_IPV6,
+ DEVCONF_ACCEPT_DAD,
+ DEVCONF_FORCE_TLLAO,
+ DEVCONF_MAX
+};
+
+
+#endif /* _UAPI_IPV6_H */
diff --git a/include/uapi/linux/ipv6_route.h b/include/uapi/linux/ipv6_route.h
new file mode 100644
index 0000000..0459664
--- /dev/null
+++ b/include/uapi/linux/ipv6_route.h
@@ -0,0 +1,58 @@
+/*
+ * Linux INET6 implementation
+ *
+ * Authors:
+ * Pedro Roque <roque@di.fc.ul.pt>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _UAPI_LINUX_IPV6_ROUTE_H
+#define _UAPI_LINUX_IPV6_ROUTE_H
+
+#include <linux/types.h>
+
+#define RTF_DEFAULT 0x00010000 /* default - learned via ND */
+#define RTF_ALLONLINK 0x00020000 /* (deprecated and will be removed)
+ fallback, no routers on link */
+#define RTF_ADDRCONF 0x00040000 /* addrconf route - RA */
+#define RTF_PREFIX_RT 0x00080000 /* A prefix only route - RA */
+#define RTF_ANYCAST 0x00100000 /* Anycast */
+
+#define RTF_NONEXTHOP 0x00200000 /* route with no nexthop */
+#define RTF_EXPIRES 0x00400000
+
+#define RTF_ROUTEINFO 0x00800000 /* route information - RA */
+
+#define RTF_CACHE 0x01000000 /* cache entry */
+#define RTF_FLOW 0x02000000 /* flow significant route */
+#define RTF_POLICY 0x04000000 /* policy route */
+
+#define RTF_PREF(pref) ((pref) << 27)
+#define RTF_PREF_MASK 0x18000000
+
+#define RTF_LOCAL 0x80000000
+
+
+struct in6_rtmsg {
+ struct in6_addr rtmsg_dst;
+ struct in6_addr rtmsg_src;
+ struct in6_addr rtmsg_gateway;
+ __u32 rtmsg_type;
+ __u16 rtmsg_dst_len;
+ __u16 rtmsg_src_len;
+ __u32 rtmsg_metric;
+ unsigned long rtmsg_info;
+ __u32 rtmsg_flags;
+ int rtmsg_ifindex;
+};
+
+#define RTMSG_NEWDEVICE 0x11
+#define RTMSG_DELDEVICE 0x12
+#define RTMSG_NEWROUTE 0x21
+#define RTMSG_DELROUTE 0x22
+
+#endif /* _UAPI_LINUX_IPV6_ROUTE_H */
diff --git a/include/linux/ipx.h b/include/uapi/linux/ipx.h
similarity index 100%
rename from include/linux/ipx.h
rename to include/uapi/linux/ipx.h
diff --git a/include/linux/irda.h b/include/uapi/linux/irda.h
similarity index 100%
rename from include/linux/irda.h
rename to include/uapi/linux/irda.h
diff --git a/include/uapi/linux/irqnr.h b/include/uapi/linux/irqnr.h
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/include/uapi/linux/irqnr.h
diff --git a/include/uapi/linux/isdn.h b/include/uapi/linux/isdn.h
new file mode 100644
index 0000000..eb1995f
--- /dev/null
+++ b/include/uapi/linux/isdn.h
@@ -0,0 +1,143 @@
+/* $Id: isdn.h,v 1.125.2.3 2004/02/10 01:07:14 keil Exp $
+ *
+ * Main header for the Linux ISDN subsystem (linklevel).
+ *
+ * Copyright 1994,95,96 by Fritz Elfert (fritz@isdn4linux.de)
+ * Copyright 1995,96 by Thinking Objects Software GmbH Wuerzburg
+ * Copyright 1995,96 by Michael Hipp (Michael.Hipp@student.uni-tuebingen.de)
+ *
+ * This software may be used and distributed according to the terms
+ * of the GNU General Public License, incorporated herein by reference.
+ *
+ */
+
+#ifndef _UAPI__ISDN_H__
+#define _UAPI__ISDN_H__
+
+#include <linux/ioctl.h>
+#include <linux/tty.h>
+
+#define ISDN_MAX_DRIVERS 32
+#define ISDN_MAX_CHANNELS 64
+
+/* New ioctl-codes */
+#define IIOCNETAIF _IO('I',1)
+#define IIOCNETDIF _IO('I',2)
+#define IIOCNETSCF _IO('I',3)
+#define IIOCNETGCF _IO('I',4)
+#define IIOCNETANM _IO('I',5)
+#define IIOCNETDNM _IO('I',6)
+#define IIOCNETGNM _IO('I',7)
+#define IIOCGETSET _IO('I',8) /* no longer supported */
+#define IIOCSETSET _IO('I',9) /* no longer supported */
+#define IIOCSETVER _IO('I',10)
+#define IIOCNETHUP _IO('I',11)
+#define IIOCSETGST _IO('I',12)
+#define IIOCSETBRJ _IO('I',13)
+#define IIOCSIGPRF _IO('I',14)
+#define IIOCGETPRF _IO('I',15)
+#define IIOCSETPRF _IO('I',16)
+#define IIOCGETMAP _IO('I',17)
+#define IIOCSETMAP _IO('I',18)
+#define IIOCNETASL _IO('I',19)
+#define IIOCNETDIL _IO('I',20)
+#define IIOCGETCPS _IO('I',21)
+#define IIOCGETDVR _IO('I',22)
+#define IIOCNETLCR _IO('I',23) /* dwabc ioctl for LCR from isdnlog */
+#define IIOCNETDWRSET _IO('I',24) /* dwabc ioctl to reset abc-values to default on a net-interface */
+
+#define IIOCNETALN _IO('I',32)
+#define IIOCNETDLN _IO('I',33)
+
+#define IIOCNETGPN _IO('I',34)
+
+#define IIOCDBGVAR _IO('I',127)
+
+#define IIOCDRVCTL _IO('I',128)
+
+/* cisco hdlck device private ioctls */
+#define SIOCGKEEPPERIOD (SIOCDEVPRIVATE + 0)
+#define SIOCSKEEPPERIOD (SIOCDEVPRIVATE + 1)
+#define SIOCGDEBSERINT (SIOCDEVPRIVATE + 2)
+#define SIOCSDEBSERINT (SIOCDEVPRIVATE + 3)
+
+/* Packet encapsulations for net-interfaces */
+#define ISDN_NET_ENCAP_ETHER 0
+#define ISDN_NET_ENCAP_RAWIP 1
+#define ISDN_NET_ENCAP_IPTYP 2
+#define ISDN_NET_ENCAP_CISCOHDLC 3 /* Without SLARP and keepalive */
+#define ISDN_NET_ENCAP_SYNCPPP 4
+#define ISDN_NET_ENCAP_UIHDLC 5
+#define ISDN_NET_ENCAP_CISCOHDLCK 6 /* With SLARP and keepalive */
+#define ISDN_NET_ENCAP_X25IFACE 7 /* Documentation/networking/x25-iface.txt */
+#define ISDN_NET_ENCAP_MAX_ENCAP ISDN_NET_ENCAP_X25IFACE
+
+/* Facility which currently uses an ISDN-channel */
+#define ISDN_USAGE_NONE 0
+#define ISDN_USAGE_RAW 1
+#define ISDN_USAGE_MODEM 2
+#define ISDN_USAGE_NET 3
+#define ISDN_USAGE_VOICE 4
+#define ISDN_USAGE_FAX 5
+#define ISDN_USAGE_MASK 7 /* Mask to get plain usage */
+#define ISDN_USAGE_DISABLED 32 /* This bit is set, if channel is disabled */
+#define ISDN_USAGE_EXCLUSIVE 64 /* This bit is set, if channel is exclusive */
+#define ISDN_USAGE_OUTGOING 128 /* This bit is set, if channel is outgoing */
+
+#define ISDN_MODEM_NUMREG 24 /* Number of Modem-Registers */
+#define ISDN_LMSNLEN 255 /* Length of tty's Listen-MSN string */
+#define ISDN_CMSGLEN 50 /* Length of CONNECT-Message to add for Modem */
+
+#define ISDN_MSNLEN 32
+#define NET_DV 0x06 /* Data version for isdn_net_ioctl_cfg */
+#define TTY_DV 0x06 /* Data version for iprofd etc. */
+
+#define INF_DV 0x01 /* Data version for /dev/isdninfo */
+
+typedef struct {
+ char drvid[25];
+ unsigned long arg;
+} isdn_ioctl_struct;
+
+typedef struct {
+ char name[10];
+ char phone[ISDN_MSNLEN];
+ int outgoing;
+} isdn_net_ioctl_phone;
+
+typedef struct {
+ char name[10]; /* Name of interface */
+ char master[10]; /* Name of Master for Bundling */
+ char slave[10]; /* Name of Slave for Bundling */
+ char eaz[256]; /* EAZ/MSN */
+ char drvid[25]; /* DriverId for Bindings */
+ int onhtime; /* Hangup-Timeout */
+ int charge; /* Charge-Units */
+ int l2_proto; /* Layer-2 protocol */
+ int l3_proto; /* Layer-3 protocol */
+ int p_encap; /* Encapsulation */
+ int exclusive; /* Channel, if bound exclusive */
+ int dialmax; /* Dial Retry-Counter */
+ int slavedelay; /* Delay until slave starts up */
+ int cbdelay; /* Delay before Callback */
+ int chargehup; /* Flag: Charge-Hangup */
+ int ihup; /* Flag: Hangup-Timeout on incoming line */
+ int secure; /* Flag: Secure */
+ int callback; /* Flag: Callback */
+ int cbhup; /* Flag: Reject Call before Callback */
+ int pppbind; /* ippp device for bindings */
+ int chargeint; /* Use fixed charge interval length */
+ int triggercps; /* BogoCPS needed for triggering slave */
+ int dialtimeout; /* Dial-Timeout */
+ int dialwait; /* Time to wait after failed dial */
+ int dialmode; /* Flag: off / on / auto */
+} isdn_net_ioctl_cfg;
+
+#define ISDN_NET_DIALMODE_MASK 0xC0 /* bits for status */
+#define ISDN_NET_DM_OFF 0x00 /* this interface is stopped */
+#define ISDN_NET_DM_MANUAL 0x40 /* this interface is on (manual) */
+#define ISDN_NET_DM_AUTO 0x80 /* this interface is autodial */
+#define ISDN_NET_DIALMODE(x) ((&(x))->flags & ISDN_NET_DIALMODE_MASK)
+
+
+#endif /* _UAPI__ISDN_H__ */
diff --git a/include/uapi/linux/isdn_divertif.h b/include/uapi/linux/isdn_divertif.h
new file mode 100644
index 0000000..3e3c2d8
--- /dev/null
+++ b/include/uapi/linux/isdn_divertif.h
@@ -0,0 +1,30 @@
+/* $Id: isdn_divertif.h,v 1.4.6.1 2001/09/23 22:25:05 kai Exp $
+ *
+ * Header for the diversion supplementary interface for i4l.
+ *
+ * Author Werner Cornelius (werner@titro.de)
+ * Copyright by Werner Cornelius (werner@titro.de)
+ *
+ * This software may be used and distributed according to the terms
+ * of the GNU General Public License, incorporated herein by reference.
+ *
+ */
+
+#ifndef _UAPI_LINUX_ISDN_DIVERTIF_H
+#define _UAPI_LINUX_ISDN_DIVERTIF_H
+
+/***********************************************************/
+/* magic value is also used to control version information */
+/***********************************************************/
+#define DIVERT_IF_MAGIC 0x25873401
+#define DIVERT_CMD_REG 0x00 /* register command */
+#define DIVERT_CMD_REL 0x01 /* release command */
+#define DIVERT_NO_ERR 0x00 /* return value no error */
+#define DIVERT_CMD_ERR 0x01 /* invalid cmd */
+#define DIVERT_VER_ERR 0x02 /* magic/version invalid */
+#define DIVERT_REG_ERR 0x03 /* module already registered */
+#define DIVERT_REL_ERR 0x04 /* module not registered */
+#define DIVERT_REG_NAME isdn_register_divert
+
+
+#endif /* _UAPI_LINUX_ISDN_DIVERTIF_H */
diff --git a/include/uapi/linux/isdn_ppp.h b/include/uapi/linux/isdn_ppp.h
new file mode 100644
index 0000000..e7d7bd2
--- /dev/null
+++ b/include/uapi/linux/isdn_ppp.h
@@ -0,0 +1,67 @@
+/* Linux ISDN subsystem, sync PPP, interface to ipppd
+ *
+ * Copyright 1994-1999 by Fritz Elfert (fritz@isdn4linux.de)
+ * Copyright 1995,96 Thinking Objects Software GmbH Wuerzburg
+ * Copyright 1995,96 by Michael Hipp (Michael.Hipp@student.uni-tuebingen.de)
+ * Copyright 2000-2002 by Kai Germaschewski (kai@germaschewski.name)
+ *
+ * This software may be used and distributed according to the terms
+ * of the GNU General Public License, incorporated herein by reference.
+ *
+ */
+
+#ifndef _UAPI_LINUX_ISDN_PPP_H
+#define _UAPI_LINUX_ISDN_PPP_H
+
+#define CALLTYPE_INCOMING 0x1
+#define CALLTYPE_OUTGOING 0x2
+#define CALLTYPE_CALLBACK 0x4
+
+#define IPPP_VERSION "2.2.0"
+
+struct pppcallinfo
+{
+ int calltype;
+ unsigned char local_num[64];
+ unsigned char remote_num[64];
+ int charge_units;
+};
+
+#define PPPIOCGCALLINFO _IOWR('t',128,struct pppcallinfo)
+#define PPPIOCBUNDLE _IOW('t',129,int)
+#define PPPIOCGMPFLAGS _IOR('t',130,int)
+#define PPPIOCSMPFLAGS _IOW('t',131,int)
+#define PPPIOCSMPMTU _IOW('t',132,int)
+#define PPPIOCSMPMRU _IOW('t',133,int)
+#define PPPIOCGCOMPRESSORS _IOR('t',134,unsigned long [8])
+#define PPPIOCSCOMPRESSOR _IOW('t',135,int)
+#define PPPIOCGIFNAME _IOR('t',136, char [IFNAMSIZ] )
+
+
+#define SC_MP_PROT 0x00000200
+#define SC_REJ_MP_PROT 0x00000400
+#define SC_OUT_SHORT_SEQ 0x00000800
+#define SC_IN_SHORT_SEQ 0x00004000
+
+#define SC_DECOMP_ON 0x01
+#define SC_COMP_ON 0x02
+#define SC_DECOMP_DISCARD 0x04
+#define SC_COMP_DISCARD 0x08
+#define SC_LINK_DECOMP_ON 0x10
+#define SC_LINK_COMP_ON 0x20
+#define SC_LINK_DECOMP_DISCARD 0x40
+#define SC_LINK_COMP_DISCARD 0x80
+
+#define ISDN_PPP_COMP_MAX_OPTIONS 16
+
+#define IPPP_COMP_FLAG_XMIT 0x1
+#define IPPP_COMP_FLAG_LINK 0x2
+
+struct isdn_ppp_comp_data {
+ int num;
+ unsigned char options[ISDN_PPP_COMP_MAX_OPTIONS];
+ int optlen;
+ int flags;
+};
+
+#endif /* _UAPI_LINUX_ISDN_PPP_H */
diff --git a/include/uapi/linux/isdnif.h b/include/uapi/linux/isdnif.h
new file mode 100644
index 0000000..246138c
--- /dev/null
+++ b/include/uapi/linux/isdnif.h
@@ -0,0 +1,56 @@
+/* $Id: isdnif.h,v 1.43.2.2 2004/01/12 23:08:35 keil Exp $
+ *
+ * Linux ISDN subsystem
+ * Definition of the interface between the subsystem and its low-level drivers.
+ *
+ * Copyright 1994,95,96 by Fritz Elfert (fritz@isdn4linux.de)
+ * Copyright 1995,96 Thinking Objects Software GmbH Wuerzburg
+ *
+ * This software may be used and distributed according to the terms
+ * of the GNU General Public License, incorporated herein by reference.
+ *
+ */
+
+#ifndef _UAPI__ISDNIF_H__
+#define _UAPI__ISDNIF_H__
+
+
+/*
+ * Values for general protocol-selection
+ */
+#define ISDN_PTYPE_UNKNOWN 0 /* Protocol undefined */
+#define ISDN_PTYPE_1TR6 1 /* german 1TR6-protocol */
+#define ISDN_PTYPE_EURO 2 /* EDSS1-protocol */
+#define ISDN_PTYPE_LEASED 3 /* for leased lines */
+#define ISDN_PTYPE_NI1 4 /* US NI-1 protocol */
+#define ISDN_PTYPE_MAX 7 /* Max. 8 Protocols */
+
+/*
+ * Values for Layer-2-protocol-selection
+ */
+#define ISDN_PROTO_L2_X75I 0 /* X75/LAPB with I-Frames */
+#define ISDN_PROTO_L2_X75UI 1 /* X75/LAPB with UI-Frames */
+#define ISDN_PROTO_L2_X75BUI 2 /* X75/LAPB with UI-Frames */
+#define ISDN_PROTO_L2_HDLC 3 /* HDLC */
+#define ISDN_PROTO_L2_TRANS 4 /* Transparent (Voice) */
+#define ISDN_PROTO_L2_X25DTE 5 /* X25/LAPB DTE mode */
+#define ISDN_PROTO_L2_X25DCE 6 /* X25/LAPB DCE mode */
+#define ISDN_PROTO_L2_V11096 7 /* V.110 bitrate adaption 9600 Baud */
+#define ISDN_PROTO_L2_V11019 8 /* V.110 bitrate adaption 19200 Baud */
+#define ISDN_PROTO_L2_V11038 9 /* V.110 bitrate adaption 38400 Baud */
+#define ISDN_PROTO_L2_MODEM 10 /* Analog Modem on Board */
+#define ISDN_PROTO_L2_FAX 11 /* Fax Group 2/3 */
+#define ISDN_PROTO_L2_HDLC_56K 12 /* HDLC 56k */
+#define ISDN_PROTO_L2_MAX 15 /* Max. 16 Protocols */
+
+/*
+ * Values for Layer-3-protocol-selection
+ */
+#define ISDN_PROTO_L3_TRANS 0 /* Transparent */
+#define ISDN_PROTO_L3_TRANSDSP 1 /* Transparent with DSP */
+#define ISDN_PROTO_L3_FCLASS2 2 /* Fax Group 2/3 CLASS 2 */
+#define ISDN_PROTO_L3_FCLASS1 3 /* Fax Group 2/3 CLASS 1 */
+#define ISDN_PROTO_L3_MAX 7 /* Max. 8 Protocols */
+
+
+#endif /* _UAPI__ISDNIF_H__ */
diff --git a/include/linux/iso_fs.h b/include/uapi/linux/iso_fs.h
similarity index 100%
rename from include/linux/iso_fs.h
rename to include/uapi/linux/iso_fs.h
diff --git a/include/linux/ivtv.h b/include/uapi/linux/ivtv.h
similarity index 100%
rename from include/linux/ivtv.h
rename to include/uapi/linux/ivtv.h
diff --git a/include/linux/ivtvfb.h b/include/uapi/linux/ivtvfb.h
similarity index 100%
rename from include/linux/ivtvfb.h
rename to include/uapi/linux/ivtvfb.h
diff --git a/include/linux/ixjuser.h b/include/uapi/linux/ixjuser.h
similarity index 100%
rename from include/linux/ixjuser.h
rename to include/uapi/linux/ixjuser.h
diff --git a/include/linux/jffs2.h b/include/uapi/linux/jffs2.h
similarity index 100%
rename from include/linux/jffs2.h
rename to include/uapi/linux/jffs2.h
diff --git a/include/uapi/linux/joystick.h b/include/uapi/linux/joystick.h
new file mode 100644
index 0000000..b856fd1
--- /dev/null
+++ b/include/uapi/linux/joystick.h
@@ -0,0 +1,136 @@
+/*
+ * Copyright (C) 1996-2000 Vojtech Pavlik
+ *
+ * Sponsored by SuSE
+ */
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Should you need to contact me, the author, you can do so either by
+ * e-mail - mail your message to <vojtech@suse.cz>, or by paper mail:
+ * Vojtech Pavlik, Ucitelska 1576, Prague 8, 182 00 Czech Republic
+ */
+#ifndef _UAPI_LINUX_JOYSTICK_H
+#define _UAPI_LINUX_JOYSTICK_H
+
+
+
+#include <linux/types.h>
+#include <linux/input.h>
+
+/*
+ * Version
+ */
+
+#define JS_VERSION 0x020100
+
+/*
+ * Types and constants for reading from /dev/js
+ */
+
+#define JS_EVENT_BUTTON 0x01 /* button pressed/released */
+#define JS_EVENT_AXIS 0x02 /* joystick moved */
+#define JS_EVENT_INIT 0x80 /* initial state of device */
+
+struct js_event {
+ __u32 time; /* event timestamp in milliseconds */
+ __s16 value; /* value */
+ __u8 type; /* event type */
+ __u8 number; /* axis/button number */
+};
+
+/*
+ * IOCTL commands for joystick driver
+ */
+
+#define JSIOCGVERSION _IOR('j', 0x01, __u32) /* get driver version */
+
+#define JSIOCGAXES _IOR('j', 0x11, __u8) /* get number of axes */
+#define JSIOCGBUTTONS _IOR('j', 0x12, __u8) /* get number of buttons */
+#define JSIOCGNAME(len) _IOC(_IOC_READ, 'j', 0x13, len) /* get identifier string */
+
+#define JSIOCSCORR _IOW('j', 0x21, struct js_corr) /* set correction values */
+#define JSIOCGCORR _IOR('j', 0x22, struct js_corr) /* get correction values */
+
+#define JSIOCSAXMAP _IOW('j', 0x31, __u8[ABS_CNT]) /* set axis mapping */
+#define JSIOCGAXMAP _IOR('j', 0x32, __u8[ABS_CNT]) /* get axis mapping */
+#define JSIOCSBTNMAP _IOW('j', 0x33, __u16[KEY_MAX - BTN_MISC + 1]) /* set button mapping */
+#define JSIOCGBTNMAP _IOR('j', 0x34, __u16[KEY_MAX - BTN_MISC + 1]) /* get button mapping */
+
+/*
+ * Types and constants for get/set correction
+ */
+
+#define JS_CORR_NONE 0x00 /* returns raw values */
+#define JS_CORR_BROKEN 0x01 /* broken line */
+
+struct js_corr {
+ __s32 coef[8];
+ __s16 prec;
+ __u16 type;
+};
+
+/*
+ * v0.x compatibility definitions
+ */
+
+#define JS_RETURN sizeof(struct JS_DATA_TYPE)
+#define JS_TRUE 1
+#define JS_FALSE 0
+#define JS_X_0 0x01
+#define JS_Y_0 0x02
+#define JS_X_1 0x04
+#define JS_Y_1 0x08
+#define JS_MAX 2
+
+#define JS_DEF_TIMEOUT 0x1300
+#define JS_DEF_CORR 0
+#define JS_DEF_TIMELIMIT 10L
+
+#define JS_SET_CAL 1
+#define JS_GET_CAL 2
+#define JS_SET_TIMEOUT 3
+#define JS_GET_TIMEOUT 4
+#define JS_SET_TIMELIMIT 5
+#define JS_GET_TIMELIMIT 6
+#define JS_GET_ALL 7
+#define JS_SET_ALL 8
+
+struct JS_DATA_TYPE {
+ __s32 buttons;
+ __s32 x;
+ __s32 y;
+};
+
+struct JS_DATA_SAVE_TYPE_32 {
+ __s32 JS_TIMEOUT;
+ __s32 BUSY;
+ __s32 JS_EXPIRETIME;
+ __s32 JS_TIMELIMIT;
+ struct JS_DATA_TYPE JS_SAVE;
+ struct JS_DATA_TYPE JS_CORR;
+};
+
+struct JS_DATA_SAVE_TYPE_64 {
+ __s32 JS_TIMEOUT;
+ __s32 BUSY;
+ __s64 JS_EXPIRETIME;
+ __s64 JS_TIMELIMIT;
+ struct JS_DATA_TYPE JS_SAVE;
+ struct JS_DATA_TYPE JS_CORR;
+};
+
+
+#endif /* _UAPI_LINUX_JOYSTICK_H */
diff --git a/include/uapi/linux/kd.h b/include/uapi/linux/kd.h
new file mode 100644
index 0000000..87b7cc4
--- /dev/null
+++ b/include/uapi/linux/kd.h
@@ -0,0 +1,183 @@
+#ifndef _UAPI_LINUX_KD_H
+#define _UAPI_LINUX_KD_H
+#include <linux/types.h>
+#include <linux/compiler.h>
+
+/* 0x4B is 'K', to avoid collision with termios and vt */
+
+#define GIO_FONT 0x4B60 /* gets font in expanded form */
+#define PIO_FONT 0x4B61 /* use font in expanded form */
+
+#define GIO_FONTX 0x4B6B /* get font using struct consolefontdesc */
+#define PIO_FONTX 0x4B6C /* set font using struct consolefontdesc */
+struct consolefontdesc {
+ unsigned short charcount; /* characters in font (256 or 512) */
+ unsigned short charheight; /* scan lines per character (1-32) */
+ char __user *chardata; /* font data in expanded form */
+};
+
+#define PIO_FONTRESET 0x4B6D /* reset to default font */
+
+#define GIO_CMAP 0x4B70 /* gets colour palette on VGA+ */
+#define PIO_CMAP 0x4B71 /* sets colour palette on VGA+ */
+
+#define KIOCSOUND 0x4B2F /* start sound generation (0 for off) */
+#define KDMKTONE 0x4B30 /* generate tone */
+
+#define KDGETLED 0x4B31 /* return current led state */
+#define KDSETLED 0x4B32 /* set led state [lights, not flags] */
+#define LED_SCR 0x01 /* scroll lock led */
+#define LED_NUM 0x02 /* num lock led */
+#define LED_CAP 0x04 /* caps lock led */
+
+#define KDGKBTYPE 0x4B33 /* get keyboard type */
+#define KB_84 0x01
+#define KB_101 0x02 /* this is what we always answer */
+#define KB_OTHER 0x03
+
+#define KDADDIO 0x4B34 /* add i/o port as valid */
+#define KDDELIO 0x4B35 /* del i/o port as valid */
+#define KDENABIO 0x4B36 /* enable i/o to video board */
+#define KDDISABIO 0x4B37 /* disable i/o to video board */
+
+#define KDSETMODE 0x4B3A /* set text/graphics mode */
+#define KD_TEXT 0x00
+#define KD_GRAPHICS 0x01
+#define KD_TEXT0 0x02 /* obsolete */
+#define KD_TEXT1 0x03 /* obsolete */
+#define KDGETMODE 0x4B3B /* get current mode */
+
+#define KDMAPDISP 0x4B3C /* map display into address space */
+#define KDUNMAPDISP 0x4B3D /* unmap display from address space */
+
+typedef char scrnmap_t;
+#define E_TABSZ 256
+#define GIO_SCRNMAP 0x4B40 /* get screen mapping from kernel */
+#define PIO_SCRNMAP 0x4B41 /* put screen mapping table in kernel */
+#define GIO_UNISCRNMAP 0x4B69 /* get full Unicode screen mapping */
+#define PIO_UNISCRNMAP 0x4B6A /* set full Unicode screen mapping */
+
+#define GIO_UNIMAP 0x4B66 /* get unicode-to-font mapping from kernel */
+struct unipair {
+ unsigned short unicode;
+ unsigned short fontpos;
+};
+struct unimapdesc {
+ unsigned short entry_ct;
+ struct unipair __user *entries;
+};
+#define PIO_UNIMAP 0x4B67 /* put unicode-to-font mapping in kernel */
+#define PIO_UNIMAPCLR 0x4B68 /* clear table, possibly advise hash algorithm */
+struct unimapinit {
+ unsigned short advised_hashsize; /* 0 if no opinion */
+ unsigned short advised_hashstep; /* 0 if no opinion */
+ unsigned short advised_hashlevel; /* 0 if no opinion */
+};
+
+#define UNI_DIRECT_BASE 0xF000 /* start of Direct Font Region */
+#define UNI_DIRECT_MASK 0x01FF /* Direct Font Region bitmask */
+
+#define K_RAW 0x00
+#define K_XLATE 0x01
+#define K_MEDIUMRAW 0x02
+#define K_UNICODE 0x03
+#define K_OFF 0x04
+#define KDGKBMODE 0x4B44 /* gets current keyboard mode */
+#define KDSKBMODE 0x4B45 /* sets current keyboard mode */
+
+#define K_METABIT 0x03
+#define K_ESCPREFIX 0x04
+#define KDGKBMETA 0x4B62 /* gets meta key handling mode */
+#define KDSKBMETA 0x4B63 /* sets meta key handling mode */
+
+#define K_SCROLLLOCK 0x01
+#define K_NUMLOCK 0x02
+#define K_CAPSLOCK 0x04
+#define KDGKBLED 0x4B64 /* get led flags (not lights) */
+#define KDSKBLED 0x4B65 /* set led flags (not lights) */
+
+struct kbentry {
+ unsigned char kb_table;
+ unsigned char kb_index;
+ unsigned short kb_value;
+};
+#define K_NORMTAB 0x00
+#define K_SHIFTTAB 0x01
+#define K_ALTTAB 0x02
+#define K_ALTSHIFTTAB 0x03
+
+#define KDGKBENT 0x4B46 /* gets one entry in translation table */
+#define KDSKBENT 0x4B47 /* sets one entry in translation table */
+
+struct kbsentry {
+ unsigned char kb_func;
+ unsigned char kb_string[512];
+};
+#define KDGKBSENT 0x4B48 /* gets one function key string entry */
+#define KDSKBSENT 0x4B49 /* sets one function key string entry */
+
+struct kbdiacr {
+ unsigned char diacr, base, result;
+};
+struct kbdiacrs {
+ unsigned int kb_cnt; /* number of entries in following array */
+ struct kbdiacr kbdiacr[256]; /* MAX_DIACR from keyboard.h */
+};
+#define KDGKBDIACR 0x4B4A /* read kernel accent table */
+#define KDSKBDIACR 0x4B4B /* write kernel accent table */
+
+struct kbdiacruc {
+ unsigned int diacr, base, result;
+};
+struct kbdiacrsuc {
+ unsigned int kb_cnt; /* number of entries in following array */
+ struct kbdiacruc kbdiacruc[256]; /* MAX_DIACR from keyboard.h */
+};
+#define KDGKBDIACRUC 0x4BFA /* read kernel accent table - UCS */
+#define KDSKBDIACRUC 0x4BFB /* write kernel accent table - UCS */
+
+struct kbkeycode {
+ unsigned int scancode, keycode;
+};
+#define KDGETKEYCODE 0x4B4C /* read kernel keycode table entry */
+#define KDSETKEYCODE 0x4B4D /* write kernel keycode table entry */
+
+#define KDSIGACCEPT 0x4B4E /* accept kbd generated signals */
+
+struct kbd_repeat {
+ int delay; /* in msec; <= 0: don't change */
+ int period; /* in msec; <= 0: don't change */
+ /* earlier this field was misnamed "rate" */
+};
+
+#define KDKBDREP 0x4B52 /* set keyboard delay/repeat rate;
+ * actually used values are returned */
+
+#define KDFONTOP 0x4B72 /* font operations */
+
+struct console_font_op {
+ unsigned int op; /* operation code KD_FONT_OP_* */
+ unsigned int flags; /* KD_FONT_FLAG_* */
+ unsigned int width, height; /* font size */
+ unsigned int charcount;
+ unsigned char __user *data; /* font data with height fixed to 32 */
+};
+
+struct console_font {
+ unsigned int width, height; /* font size */
+ unsigned int charcount;
+ unsigned char *data; /* font data with height fixed to 32 */
+};
+
+#define KD_FONT_OP_SET 0 /* Set font */
+#define KD_FONT_OP_GET 1 /* Get font */
+#define KD_FONT_OP_SET_DEFAULT 2 /* Set font to default, data points to name / NULL */
+#define KD_FONT_OP_COPY 3 /* Copy from another console */
+
+#define KD_FONT_FLAG_DONT_RECALC 1 /* Don't recalculate hw charcell size [compat] */
+
+/* note: 0x4B00-0x4B4E all have had a value at some time;
+ don't reuse for the time being */
+/* note: 0x4B60-0x4B6D, 0x4B70-0x4B72 used above */
+
+#endif /* _UAPI_LINUX_KD_H */
diff --git a/include/uapi/linux/kdev_t.h b/include/uapi/linux/kdev_t.h
new file mode 100644
index 0000000..0d881fa
--- /dev/null
+++ b/include/uapi/linux/kdev_t.h
@@ -0,0 +1,13 @@
+#ifndef _UAPI_LINUX_KDEV_T_H
+#define _UAPI_LINUX_KDEV_T_H
+#ifndef __KERNEL__
+
+/*
+Some programs want their definitions of MAJOR and MINOR and MKDEV
+from the kernel sources. These must be the externally visible ones.
+*/
+#define MAJOR(dev) ((dev)>>8)
+#define MINOR(dev) ((dev) & 0xff)
+#define MKDEV(ma,mi) ((ma)<<8 | (mi))
+#endif /* __KERNEL__ */
+#endif /* _UAPI_LINUX_KDEV_T_H */
diff --git a/include/uapi/linux/kernel-page-flags.h b/include/uapi/linux/kernel-page-flags.h
new file mode 100644
index 0000000..5116a0e
--- /dev/null
+++ b/include/uapi/linux/kernel-page-flags.h
@@ -0,0 +1,36 @@
+#ifndef _UAPILINUX_KERNEL_PAGE_FLAGS_H
+#define _UAPILINUX_KERNEL_PAGE_FLAGS_H
+
+/*
+ * Stable page flag bits exported to user space
+ */
+
+#define KPF_LOCKED 0
+#define KPF_ERROR 1
+#define KPF_REFERENCED 2
+#define KPF_UPTODATE 3
+#define KPF_DIRTY 4
+#define KPF_LRU 5
+#define KPF_ACTIVE 6
+#define KPF_SLAB 7
+#define KPF_WRITEBACK 8
+#define KPF_RECLAIM 9
+#define KPF_BUDDY 10
+
+/* 11-20: new additions in 2.6.31 */
+#define KPF_MMAP 11
+#define KPF_ANON 12
+#define KPF_SWAPCACHE 13
+#define KPF_SWAPBACKED 14
+#define KPF_COMPOUND_HEAD 15
+#define KPF_COMPOUND_TAIL 16
+#define KPF_HUGE 17
+#define KPF_UNEVICTABLE 18
+#define KPF_HWPOISON 19
+#define KPF_NOPAGE 20
+
+#define KPF_KSM 21
+#define KPF_THP 22
+
+
+#endif /* _UAPILINUX_KERNEL_PAGE_FLAGS_H */
diff --git a/include/uapi/linux/kernel.h b/include/uapi/linux/kernel.h
new file mode 100644
index 0000000..321e399
--- /dev/null
+++ b/include/uapi/linux/kernel.h
@@ -0,0 +1,13 @@
+#ifndef _UAPI_LINUX_KERNEL_H
+#define _UAPI_LINUX_KERNEL_H
+
+#include <linux/sysinfo.h>
+
+/*
+ * 'kernel.h' contains some often-used function prototypes etc
+ */
+#define __ALIGN_KERNEL(x, a) __ALIGN_KERNEL_MASK(x, (typeof(x))(a) - 1)
+#define __ALIGN_KERNEL_MASK(x, mask) (((x) + (mask)) & ~(mask))
+
+
+#endif /* _UAPI_LINUX_KERNEL_H */
diff --git a/include/uapi/linux/kernelcapi.h b/include/uapi/linux/kernelcapi.h
new file mode 100644
index 0000000..89bf40d
--- /dev/null
+++ b/include/uapi/linux/kernelcapi.h
@@ -0,0 +1,47 @@
+/*
+ * $Id: kernelcapi.h,v 1.8.6.2 2001/02/07 11:31:31 kai Exp $
+ *
+ * Kernel CAPI 2.0 Interface for Linux
+ *
+ * (c) Copyright 1997 by Carsten Paeth (calle@calle.in-berlin.de)
+ *
+ */
+
+#ifndef _UAPI__KERNELCAPI_H__
+#define _UAPI__KERNELCAPI_H__
+
+#define CAPI_MAXAPPL 240 /* maximum number of applications */
+#define CAPI_MAXCONTR 32 /* maximum number of controller */
+#define CAPI_MAXDATAWINDOW 8
+
+
+typedef struct kcapi_flagdef {
+ int contr;
+ int flag;
+} kcapi_flagdef;
+
+typedef struct kcapi_carddef {
+ char driver[32];
+ unsigned int port;
+ unsigned irq;
+ unsigned int membase;
+ int cardnr;
+} kcapi_carddef;
+
+/* new ioctls >= 10 */
+#define KCAPI_CMD_TRACE 10
+#define KCAPI_CMD_ADDCARD 11 /* OBSOLETE */
+
+/*
+ * flag > 2 => trace also data
+ * flag & 1 => show trace
+ */
+#define KCAPI_TRACE_OFF 0
+#define KCAPI_TRACE_SHORT_NO_DATA 1
+#define KCAPI_TRACE_FULL_NO_DATA 2
+#define KCAPI_TRACE_SHORT 3
+#define KCAPI_TRACE_FULL 4
+
+
+
+#endif /* _UAPI__KERNELCAPI_H__ */
diff --git a/include/uapi/linux/kexec.h b/include/uapi/linux/kexec.h
new file mode 100644
index 0000000..104838f
--- /dev/null
+++ b/include/uapi/linux/kexec.h
@@ -0,0 +1,54 @@
+#ifndef _UAPILINUX_KEXEC_H
+#define _UAPILINUX_KEXEC_H
+
+/* kexec system call - It loads the new kernel to boot into.
+ * kexec does not sync, or unmount filesystems so if you need
+ * that to happen you need to do that yourself.
+ */
+
+#include <linux/types.h>
+
+/* kexec flags for different usage scenarios */
+#define KEXEC_ON_CRASH 0x00000001
+#define KEXEC_PRESERVE_CONTEXT 0x00000002
+#define KEXEC_ARCH_MASK 0xffff0000
+
+/* These values match the ELF architecture values.
+ * Unless there is a good reason that should continue to be the case.
+ */
+#define KEXEC_ARCH_DEFAULT ( 0 << 16)
+#define KEXEC_ARCH_386 ( 3 << 16)
+#define KEXEC_ARCH_X86_64 (62 << 16)
+#define KEXEC_ARCH_PPC (20 << 16)
+#define KEXEC_ARCH_PPC64 (21 << 16)
+#define KEXEC_ARCH_IA_64 (50 << 16)
+#define KEXEC_ARCH_ARM (40 << 16)
+#define KEXEC_ARCH_S390 (22 << 16)
+#define KEXEC_ARCH_SH (42 << 16)
+#define KEXEC_ARCH_MIPS_LE (10 << 16)
+#define KEXEC_ARCH_MIPS ( 8 << 16)
+
+/* The artificial cap on the number of segments passed to kexec_load. */
+#define KEXEC_SEGMENT_MAX 16
+
+#ifndef __KERNEL__
+/*
+ * This structure is used to hold the arguments that are used when
+ * loading kernel binaries.
+ */
+struct kexec_segment {
+ const void *buf;
+ size_t bufsz;
+ const void *mem;
+ size_t memsz;
+};
+
+/* Load a new kernel image as described by the kexec_segment array
+ * consisting of passed number of segments at the entry-point address.
+ * The flags allow different useage types.
+ */
+extern int kexec_load(void *, size_t, struct kexec_segment *,
+ unsigned long int);
+#endif /* __KERNEL__ */
+
+#endif /* _UAPILINUX_KEXEC_H */
diff --git a/include/uapi/linux/keyboard.h b/include/uapi/linux/keyboard.h
new file mode 100644
index 0000000..5a68497
--- /dev/null
+++ b/include/uapi/linux/keyboard.h
@@ -0,0 +1,443 @@
+#ifndef _UAPI__LINUX_KEYBOARD_H
+#define _UAPI__LINUX_KEYBOARD_H
+
+#include <linux/wait.h>
+
+#define KG_SHIFT 0
+#define KG_CTRL 2
+#define KG_ALT 3
+#define KG_ALTGR 1
+#define KG_SHIFTL 4
+#define KG_KANASHIFT 4
+#define KG_SHIFTR 5
+#define KG_CTRLL 6
+#define KG_CTRLR 7
+#define KG_CAPSSHIFT 8
+
+#define NR_SHIFT 9
+
+#define NR_KEYS 256
+#define MAX_NR_KEYMAPS 256
+/* This means 128Kb if all keymaps are allocated. Only the superuser
+ may increase the number of keymaps beyond MAX_NR_OF_USER_KEYMAPS. */
+#define MAX_NR_OF_USER_KEYMAPS 256 /* should be at least 7 */
+
+
+#define MAX_NR_FUNC 256 /* max nr of strings assigned to keys */
+
+#define KT_LATIN 0 /* we depend on this being zero */
+#define KT_LETTER 11 /* symbol that can be acted upon by CapsLock */
+#define KT_FN 1
+#define KT_SPEC 2
+#define KT_PAD 3
+#define KT_DEAD 4
+#define KT_CONS 5
+#define KT_CUR 6
+#define KT_SHIFT 7
+#define KT_META 8
+#define KT_ASCII 9
+#define KT_LOCK 10
+#define KT_SLOCK 12
+#define KT_DEAD2 13
+#define KT_BRL 14
+
+#define K(t,v) (((t)<<8)|(v))
+#define KTYP(x) ((x) >> 8)
+#define KVAL(x) ((x) & 0xff)
+
+#define K_F1 K(KT_FN,0)
+#define K_F2 K(KT_FN,1)
+#define K_F3 K(KT_FN,2)
+#define K_F4 K(KT_FN,3)
+#define K_F5 K(KT_FN,4)
+#define K_F6 K(KT_FN,5)
+#define K_F7 K(KT_FN,6)
+#define K_F8 K(KT_FN,7)
+#define K_F9 K(KT_FN,8)
+#define K_F10 K(KT_FN,9)
+#define K_F11 K(KT_FN,10)
+#define K_F12 K(KT_FN,11)
+#define K_F13 K(KT_FN,12)
+#define K_F14 K(KT_FN,13)
+#define K_F15 K(KT_FN,14)
+#define K_F16 K(KT_FN,15)
+#define K_F17 K(KT_FN,16)
+#define K_F18 K(KT_FN,17)
+#define K_F19 K(KT_FN,18)
+#define K_F20 K(KT_FN,19)
+#define K_FIND K(KT_FN,20)
+#define K_INSERT K(KT_FN,21)
+#define K_REMOVE K(KT_FN,22)
+#define K_SELECT K(KT_FN,23)
+#define K_PGUP K(KT_FN,24) /* PGUP is a synonym for PRIOR */
+#define K_PGDN K(KT_FN,25) /* PGDN is a synonym for NEXT */
+#define K_MACRO K(KT_FN,26)
+#define K_HELP K(KT_FN,27)
+#define K_DO K(KT_FN,28)
+#define K_PAUSE K(KT_FN,29)
+#define K_F21 K(KT_FN,30)
+#define K_F22 K(KT_FN,31)
+#define K_F23 K(KT_FN,32)
+#define K_F24 K(KT_FN,33)
+#define K_F25 K(KT_FN,34)
+#define K_F26 K(KT_FN,35)
+#define K_F27 K(KT_FN,36)
+#define K_F28 K(KT_FN,37)
+#define K_F29 K(KT_FN,38)
+#define K_F30 K(KT_FN,39)
+#define K_F31 K(KT_FN,40)
+#define K_F32 K(KT_FN,41)
+#define K_F33 K(KT_FN,42)
+#define K_F34 K(KT_FN,43)
+#define K_F35 K(KT_FN,44)
+#define K_F36 K(KT_FN,45)
+#define K_F37 K(KT_FN,46)
+#define K_F38 K(KT_FN,47)
+#define K_F39 K(KT_FN,48)
+#define K_F40 K(KT_FN,49)
+#define K_F41 K(KT_FN,50)
+#define K_F42 K(KT_FN,51)
+#define K_F43 K(KT_FN,52)
+#define K_F44 K(KT_FN,53)
+#define K_F45 K(KT_FN,54)
+#define K_F46 K(KT_FN,55)
+#define K_F47 K(KT_FN,56)
+#define K_F48 K(KT_FN,57)
+#define K_F49 K(KT_FN,58)
+#define K_F50 K(KT_FN,59)
+#define K_F51 K(KT_FN,60)
+#define K_F52 K(KT_FN,61)
+#define K_F53 K(KT_FN,62)
+#define K_F54 K(KT_FN,63)
+#define K_F55 K(KT_FN,64)
+#define K_F56 K(KT_FN,65)
+#define K_F57 K(KT_FN,66)
+#define K_F58 K(KT_FN,67)
+#define K_F59 K(KT_FN,68)
+#define K_F60 K(KT_FN,69)
+#define K_F61 K(KT_FN,70)
+#define K_F62 K(KT_FN,71)
+#define K_F63 K(KT_FN,72)
+#define K_F64 K(KT_FN,73)
+#define K_F65 K(KT_FN,74)
+#define K_F66 K(KT_FN,75)
+#define K_F67 K(KT_FN,76)
+#define K_F68 K(KT_FN,77)
+#define K_F69 K(KT_FN,78)
+#define K_F70 K(KT_FN,79)
+#define K_F71 K(KT_FN,80)
+#define K_F72 K(KT_FN,81)
+#define K_F73 K(KT_FN,82)
+#define K_F74 K(KT_FN,83)
+#define K_F75 K(KT_FN,84)
+#define K_F76 K(KT_FN,85)
+#define K_F77 K(KT_FN,86)
+#define K_F78 K(KT_FN,87)
+#define K_F79 K(KT_FN,88)
+#define K_F80 K(KT_FN,89)
+#define K_F81 K(KT_FN,90)
+#define K_F82 K(KT_FN,91)
+#define K_F83 K(KT_FN,92)
+#define K_F84 K(KT_FN,93)
+#define K_F85 K(KT_FN,94)
+#define K_F86 K(KT_FN,95)
+#define K_F87 K(KT_FN,96)
+#define K_F88 K(KT_FN,97)
+#define K_F89 K(KT_FN,98)
+#define K_F90 K(KT_FN,99)
+#define K_F91 K(KT_FN,100)
+#define K_F92 K(KT_FN,101)
+#define K_F93 K(KT_FN,102)
+#define K_F94 K(KT_FN,103)
+#define K_F95 K(KT_FN,104)
+#define K_F96 K(KT_FN,105)
+#define K_F97 K(KT_FN,106)
+#define K_F98 K(KT_FN,107)
+#define K_F99 K(KT_FN,108)
+#define K_F100 K(KT_FN,109)
+#define K_F101 K(KT_FN,110)
+#define K_F102 K(KT_FN,111)
+#define K_F103 K(KT_FN,112)
+#define K_F104 K(KT_FN,113)
+#define K_F105 K(KT_FN,114)
+#define K_F106 K(KT_FN,115)
+#define K_F107 K(KT_FN,116)
+#define K_F108 K(KT_FN,117)
+#define K_F109 K(KT_FN,118)
+#define K_F110 K(KT_FN,119)
+#define K_F111 K(KT_FN,120)
+#define K_F112 K(KT_FN,121)
+#define K_F113 K(KT_FN,122)
+#define K_F114 K(KT_FN,123)
+#define K_F115 K(KT_FN,124)
+#define K_F116 K(KT_FN,125)
+#define K_F117 K(KT_FN,126)
+#define K_F118 K(KT_FN,127)
+#define K_F119 K(KT_FN,128)
+#define K_F120 K(KT_FN,129)
+#define K_F121 K(KT_FN,130)
+#define K_F122 K(KT_FN,131)
+#define K_F123 K(KT_FN,132)
+#define K_F124 K(KT_FN,133)
+#define K_F125 K(KT_FN,134)
+#define K_F126 K(KT_FN,135)
+#define K_F127 K(KT_FN,136)
+#define K_F128 K(KT_FN,137)
+#define K_F129 K(KT_FN,138)
+#define K_F130 K(KT_FN,139)
+#define K_F131 K(KT_FN,140)
+#define K_F132 K(KT_FN,141)
+#define K_F133 K(KT_FN,142)
+#define K_F134 K(KT_FN,143)
+#define K_F135 K(KT_FN,144)
+#define K_F136 K(KT_FN,145)
+#define K_F137 K(KT_FN,146)
+#define K_F138 K(KT_FN,147)
+#define K_F139 K(KT_FN,148)
+#define K_F140 K(KT_FN,149)
+#define K_F141 K(KT_FN,150)
+#define K_F142 K(KT_FN,151)
+#define K_F143 K(KT_FN,152)
+#define K_F144 K(KT_FN,153)
+#define K_F145 K(KT_FN,154)
+#define K_F146 K(KT_FN,155)
+#define K_F147 K(KT_FN,156)
+#define K_F148 K(KT_FN,157)
+#define K_F149 K(KT_FN,158)
+#define K_F150 K(KT_FN,159)
+#define K_F151 K(KT_FN,160)
+#define K_F152 K(KT_FN,161)
+#define K_F153 K(KT_FN,162)
+#define K_F154 K(KT_FN,163)
+#define K_F155 K(KT_FN,164)
+#define K_F156 K(KT_FN,165)
+#define K_F157 K(KT_FN,166)
+#define K_F158 K(KT_FN,167)
+#define K_F159 K(KT_FN,168)
+#define K_F160 K(KT_FN,169)
+#define K_F161 K(KT_FN,170)
+#define K_F162 K(KT_FN,171)
+#define K_F163 K(KT_FN,172)
+#define K_F164 K(KT_FN,173)
+#define K_F165 K(KT_FN,174)
+#define K_F166 K(KT_FN,175)
+#define K_F167 K(KT_FN,176)
+#define K_F168 K(KT_FN,177)
+#define K_F169 K(KT_FN,178)
+#define K_F170 K(KT_FN,179)
+#define K_F171 K(KT_FN,180)
+#define K_F172 K(KT_FN,181)
+#define K_F173 K(KT_FN,182)
+#define K_F174 K(KT_FN,183)
+#define K_F175 K(KT_FN,184)
+#define K_F176 K(KT_FN,185)
+#define K_F177 K(KT_FN,186)
+#define K_F178 K(KT_FN,187)
+#define K_F179 K(KT_FN,188)
+#define K_F180 K(KT_FN,189)
+#define K_F181 K(KT_FN,190)
+#define K_F182 K(KT_FN,191)
+#define K_F183 K(KT_FN,192)
+#define K_F184 K(KT_FN,193)
+#define K_F185 K(KT_FN,194)
+#define K_F186 K(KT_FN,195)
+#define K_F187 K(KT_FN,196)
+#define K_F188 K(KT_FN,197)
+#define K_F189 K(KT_FN,198)
+#define K_F190 K(KT_FN,199)
+#define K_F191 K(KT_FN,200)
+#define K_F192 K(KT_FN,201)
+#define K_F193 K(KT_FN,202)
+#define K_F194 K(KT_FN,203)
+#define K_F195 K(KT_FN,204)
+#define K_F196 K(KT_FN,205)
+#define K_F197 K(KT_FN,206)
+#define K_F198 K(KT_FN,207)
+#define K_F199 K(KT_FN,208)
+#define K_F200 K(KT_FN,209)
+#define K_F201 K(KT_FN,210)
+#define K_F202 K(KT_FN,211)
+#define K_F203 K(KT_FN,212)
+#define K_F204 K(KT_FN,213)
+#define K_F205 K(KT_FN,214)
+#define K_F206 K(KT_FN,215)
+#define K_F207 K(KT_FN,216)
+#define K_F208 K(KT_FN,217)
+#define K_F209 K(KT_FN,218)
+#define K_F210 K(KT_FN,219)
+#define K_F211 K(KT_FN,220)
+#define K_F212 K(KT_FN,221)
+#define K_F213 K(KT_FN,222)
+#define K_F214 K(KT_FN,223)
+#define K_F215 K(KT_FN,224)
+#define K_F216 K(KT_FN,225)
+#define K_F217 K(KT_FN,226)
+#define K_F218 K(KT_FN,227)
+#define K_F219 K(KT_FN,228)
+#define K_F220 K(KT_FN,229)
+#define K_F221 K(KT_FN,230)
+#define K_F222 K(KT_FN,231)
+#define K_F223 K(KT_FN,232)
+#define K_F224 K(KT_FN,233)
+#define K_F225 K(KT_FN,234)
+#define K_F226 K(KT_FN,235)
+#define K_F227 K(KT_FN,236)
+#define K_F228 K(KT_FN,237)
+#define K_F229 K(KT_FN,238)
+#define K_F230 K(KT_FN,239)
+#define K_F231 K(KT_FN,240)
+#define K_F232 K(KT_FN,241)
+#define K_F233 K(KT_FN,242)
+#define K_F234 K(KT_FN,243)
+#define K_F235 K(KT_FN,244)
+#define K_F236 K(KT_FN,245)
+#define K_F237 K(KT_FN,246)
+#define K_F238 K(KT_FN,247)
+#define K_F239 K(KT_FN,248)
+#define K_F240 K(KT_FN,249)
+#define K_F241 K(KT_FN,250)
+#define K_F242 K(KT_FN,251)
+#define K_F243 K(KT_FN,252)
+#define K_F244 K(KT_FN,253)
+#define K_F245 K(KT_FN,254)
+#define K_UNDO K(KT_FN,255)
+
+
+#define K_HOLE K(KT_SPEC,0)
+#define K_ENTER K(KT_SPEC,1)
+#define K_SH_REGS K(KT_SPEC,2)
+#define K_SH_MEM K(KT_SPEC,3)
+#define K_SH_STAT K(KT_SPEC,4)
+#define K_BREAK K(KT_SPEC,5)
+#define K_CONS K(KT_SPEC,6)
+#define K_CAPS K(KT_SPEC,7)
+#define K_NUM K(KT_SPEC,8)
+#define K_HOLD K(KT_SPEC,9)
+#define K_SCROLLFORW K(KT_SPEC,10)
+#define K_SCROLLBACK K(KT_SPEC,11)
+#define K_BOOT K(KT_SPEC,12)
+#define K_CAPSON K(KT_SPEC,13)
+#define K_COMPOSE K(KT_SPEC,14)
+#define K_SAK K(KT_SPEC,15)
+#define K_DECRCONSOLE K(KT_SPEC,16)
+#define K_INCRCONSOLE K(KT_SPEC,17)
+#define K_SPAWNCONSOLE K(KT_SPEC,18)
+#define K_BARENUMLOCK K(KT_SPEC,19)
+
+#define K_ALLOCATED K(KT_SPEC,126) /* dynamically allocated keymap */
+#define K_NOSUCHMAP K(KT_SPEC,127) /* returned by KDGKBENT */
+
+#define K_P0 K(KT_PAD,0)
+#define K_P1 K(KT_PAD,1)
+#define K_P2 K(KT_PAD,2)
+#define K_P3 K(KT_PAD,3)
+#define K_P4 K(KT_PAD,4)
+#define K_P5 K(KT_PAD,5)
+#define K_P6 K(KT_PAD,6)
+#define K_P7 K(KT_PAD,7)
+#define K_P8 K(KT_PAD,8)
+#define K_P9 K(KT_PAD,9)
+#define K_PPLUS K(KT_PAD,10) /* key-pad plus */
+#define K_PMINUS K(KT_PAD,11) /* key-pad minus */
+#define K_PSTAR K(KT_PAD,12) /* key-pad asterisk (star) */
+#define K_PSLASH K(KT_PAD,13) /* key-pad slash */
+#define K_PENTER K(KT_PAD,14) /* key-pad enter */
+#define K_PCOMMA K(KT_PAD,15) /* key-pad comma: kludge... */
+#define K_PDOT K(KT_PAD,16) /* key-pad dot (period): kludge... */
+#define K_PPLUSMINUS K(KT_PAD,17) /* key-pad plus/minus */
+#define K_PPARENL K(KT_PAD,18) /* key-pad left parenthesis */
+#define K_PPARENR K(KT_PAD,19) /* key-pad right parenthesis */
+
+#define NR_PAD 20
+
+#define K_DGRAVE K(KT_DEAD,0)
+#define K_DACUTE K(KT_DEAD,1)
+#define K_DCIRCM K(KT_DEAD,2)
+#define K_DTILDE K(KT_DEAD,3)
+#define K_DDIERE K(KT_DEAD,4)
+#define K_DCEDIL K(KT_DEAD,5)
+
+#define NR_DEAD 6
+
+#define K_DOWN K(KT_CUR,0)
+#define K_LEFT K(KT_CUR,1)
+#define K_RIGHT K(KT_CUR,2)
+#define K_UP K(KT_CUR,3)
+
+#define K_SHIFT K(KT_SHIFT,KG_SHIFT)
+#define K_CTRL K(KT_SHIFT,KG_CTRL)
+#define K_ALT K(KT_SHIFT,KG_ALT)
+#define K_ALTGR K(KT_SHIFT,KG_ALTGR)
+#define K_SHIFTL K(KT_SHIFT,KG_SHIFTL)
+#define K_SHIFTR K(KT_SHIFT,KG_SHIFTR)
+#define K_CTRLL K(KT_SHIFT,KG_CTRLL)
+#define K_CTRLR K(KT_SHIFT,KG_CTRLR)
+#define K_CAPSSHIFT K(KT_SHIFT,KG_CAPSSHIFT)
+
+#define K_ASC0 K(KT_ASCII,0)
+#define K_ASC1 K(KT_ASCII,1)
+#define K_ASC2 K(KT_ASCII,2)
+#define K_ASC3 K(KT_ASCII,3)
+#define K_ASC4 K(KT_ASCII,4)
+#define K_ASC5 K(KT_ASCII,5)
+#define K_ASC6 K(KT_ASCII,6)
+#define K_ASC7 K(KT_ASCII,7)
+#define K_ASC8 K(KT_ASCII,8)
+#define K_ASC9 K(KT_ASCII,9)
+#define K_HEX0 K(KT_ASCII,10)
+#define K_HEX1 K(KT_ASCII,11)
+#define K_HEX2 K(KT_ASCII,12)
+#define K_HEX3 K(KT_ASCII,13)
+#define K_HEX4 K(KT_ASCII,14)
+#define K_HEX5 K(KT_ASCII,15)
+#define K_HEX6 K(KT_ASCII,16)
+#define K_HEX7 K(KT_ASCII,17)
+#define K_HEX8 K(KT_ASCII,18)
+#define K_HEX9 K(KT_ASCII,19)
+#define K_HEXa K(KT_ASCII,20)
+#define K_HEXb K(KT_ASCII,21)
+#define K_HEXc K(KT_ASCII,22)
+#define K_HEXd K(KT_ASCII,23)
+#define K_HEXe K(KT_ASCII,24)
+#define K_HEXf K(KT_ASCII,25)
+
+#define NR_ASCII 26
+
+#define K_SHIFTLOCK K(KT_LOCK,KG_SHIFT)
+#define K_CTRLLOCK K(KT_LOCK,KG_CTRL)
+#define K_ALTLOCK K(KT_LOCK,KG_ALT)
+#define K_ALTGRLOCK K(KT_LOCK,KG_ALTGR)
+#define K_SHIFTLLOCK K(KT_LOCK,KG_SHIFTL)
+#define K_SHIFTRLOCK K(KT_LOCK,KG_SHIFTR)
+#define K_CTRLLLOCK K(KT_LOCK,KG_CTRLL)
+#define K_CTRLRLOCK K(KT_LOCK,KG_CTRLR)
+#define K_CAPSSHIFTLOCK K(KT_LOCK,KG_CAPSSHIFT)
+
+#define K_SHIFT_SLOCK K(KT_SLOCK,KG_SHIFT)
+#define K_CTRL_SLOCK K(KT_SLOCK,KG_CTRL)
+#define K_ALT_SLOCK K(KT_SLOCK,KG_ALT)
+#define K_ALTGR_SLOCK K(KT_SLOCK,KG_ALTGR)
+#define K_SHIFTL_SLOCK K(KT_SLOCK,KG_SHIFTL)
+#define K_SHIFTR_SLOCK K(KT_SLOCK,KG_SHIFTR)
+#define K_CTRLL_SLOCK K(KT_SLOCK,KG_CTRLL)
+#define K_CTRLR_SLOCK K(KT_SLOCK,KG_CTRLR)
+#define K_CAPSSHIFT_SLOCK K(KT_SLOCK,KG_CAPSSHIFT)
+
+#define NR_LOCK 9
+
+#define K_BRL_BLANK K(KT_BRL, 0)
+#define K_BRL_DOT1 K(KT_BRL, 1)
+#define K_BRL_DOT2 K(KT_BRL, 2)
+#define K_BRL_DOT3 K(KT_BRL, 3)
+#define K_BRL_DOT4 K(KT_BRL, 4)
+#define K_BRL_DOT5 K(KT_BRL, 5)
+#define K_BRL_DOT6 K(KT_BRL, 6)
+#define K_BRL_DOT7 K(KT_BRL, 7)
+#define K_BRL_DOT8 K(KT_BRL, 8)
+#define K_BRL_DOT9 K(KT_BRL, 9)
+#define K_BRL_DOT10 K(KT_BRL, 10)
+
+#define NR_BRL 11
+
+#define MAX_DIACR 256
+#endif /* _UAPI__LINUX_KEYBOARD_H */
diff --git a/include/linux/keyctl.h b/include/uapi/linux/keyctl.h
similarity index 100%
rename from include/linux/keyctl.h
rename to include/uapi/linux/keyctl.h
diff --git a/include/linux/kvm.h b/include/uapi/linux/kvm.h
similarity index 100%
rename from include/linux/kvm.h
rename to include/uapi/linux/kvm.h
diff --git a/include/uapi/linux/kvm_para.h b/include/uapi/linux/kvm_para.h
new file mode 100644
index 0000000..cea2c5c
--- /dev/null
+++ b/include/uapi/linux/kvm_para.h
@@ -0,0 +1,28 @@
+#ifndef _UAPI__LINUX_KVM_PARA_H
+#define _UAPI__LINUX_KVM_PARA_H
+
+/*
+ * This header file provides a method for making a hypercall to the host
+ * Architectures should define:
+ * - kvm_hypercall0, kvm_hypercall1...
+ * - kvm_arch_para_features
+ * - kvm_para_available
+ */
+
+/* Return values for hypercalls */
+#define KVM_ENOSYS 1000
+#define KVM_EFAULT EFAULT
+#define KVM_E2BIG E2BIG
+#define KVM_EPERM EPERM
+
+#define KVM_HC_VAPIC_POLL_IRQ 1
+#define KVM_HC_MMU_OP 2
+#define KVM_HC_FEATURES 3
+#define KVM_HC_PPC_MAP_MAGIC_PAGE 4
+
+/*
+ * hypercalls use architecture specific
+ */
+#include <asm/kvm_para.h>
+
+#endif /* _UAPI__LINUX_KVM_PARA_H */
diff --git a/include/uapi/linux/l2tp.h b/include/uapi/linux/l2tp.h
new file mode 100644
index 0000000..8adb681
--- /dev/null
+++ b/include/uapi/linux/l2tp.h
@@ -0,0 +1,180 @@
+/*
+ * L2TP-over-IP socket for L2TPv3.
+ *
+ * Author: James Chapman <jchapman@katalix.com>
+ */
+
+#ifndef _UAPI_LINUX_L2TP_H_
+#define _UAPI_LINUX_L2TP_H_
+
+#include <linux/types.h>
+#include <linux/socket.h>
+#ifndef __KERNEL__
+#include <netinet/in.h>
+#endif
+
+#define IPPROTO_L2TP 115
+
+/**
+ * struct sockaddr_l2tpip - the sockaddr structure for L2TP-over-IP sockets
+ * @l2tp_family: address family number AF_L2TPIP.
+ * @l2tp_addr: protocol specific address information
+ * @l2tp_conn_id: connection id of tunnel
+ */
+#define __SOCK_SIZE__ 16 /* sizeof(struct sockaddr) */
+struct sockaddr_l2tpip {
+ /* The first fields must match struct sockaddr_in */
+ __kernel_sa_family_t l2tp_family; /* AF_INET */
+ __be16 l2tp_unused; /* INET port number (unused) */
+ struct in_addr l2tp_addr; /* Internet address */
+
+ __u32 l2tp_conn_id; /* Connection ID of tunnel */
+
+ /* Pad to size of `struct sockaddr'. */
+ unsigned char __pad[sizeof(struct sockaddr) -
+ sizeof(__kernel_sa_family_t) -
+ sizeof(__be16) - sizeof(struct in_addr) -
+ sizeof(__u32)];
+};
+
+/**
+ * struct sockaddr_l2tpip6 - the sockaddr structure for L2TP-over-IPv6 sockets
+ * @l2tp_family: address family number AF_L2TPIP.
+ * @l2tp_addr: protocol specific address information
+ * @l2tp_conn_id: connection id of tunnel
+ */
+struct sockaddr_l2tpip6 {
+ /* The first fields must match struct sockaddr_in6 */
+ __kernel_sa_family_t l2tp_family; /* AF_INET6 */
+ __be16 l2tp_unused; /* INET port number (unused) */
+ __be32 l2tp_flowinfo; /* IPv6 flow information */
+ struct in6_addr l2tp_addr; /* IPv6 address */
+ __u32 l2tp_scope_id; /* scope id (new in RFC2553) */
+ __u32 l2tp_conn_id; /* Connection ID of tunnel */
+};
+
+/*****************************************************************************
+ * NETLINK_GENERIC netlink family.
+ *****************************************************************************/
+
+/*
+ * Commands.
+ * Valid TLVs of each command are:-
+ * TUNNEL_CREATE - CONN_ID, pw_type, netns, ifname, ipinfo, udpinfo, udpcsum, vlanid
+ * TUNNEL_DELETE - CONN_ID
+ * TUNNEL_MODIFY - CONN_ID, udpcsum
+ * TUNNEL_GETSTATS - CONN_ID, (stats)
+ * TUNNEL_GET - CONN_ID, (...)
+ * SESSION_CREATE - SESSION_ID, PW_TYPE, offset, data_seq, cookie, peer_cookie, offset, l2spec
+ * SESSION_DELETE - SESSION_ID
+ * SESSION_MODIFY - SESSION_ID, data_seq
+ * SESSION_GET - SESSION_ID, (...)
+ * SESSION_GETSTATS - SESSION_ID, (stats)
+ *
+ */
+enum {
+ L2TP_CMD_NOOP,
+ L2TP_CMD_TUNNEL_CREATE,
+ L2TP_CMD_TUNNEL_DELETE,
+ L2TP_CMD_TUNNEL_MODIFY,
+ L2TP_CMD_TUNNEL_GET,
+ L2TP_CMD_SESSION_CREATE,
+ L2TP_CMD_SESSION_DELETE,
+ L2TP_CMD_SESSION_MODIFY,
+ L2TP_CMD_SESSION_GET,
+ __L2TP_CMD_MAX,
+};
+
+#define L2TP_CMD_MAX (__L2TP_CMD_MAX - 1)
+
+/*
+ * ATTR types defined for L2TP
+ */
+enum {
+ L2TP_ATTR_NONE, /* no data */
+ L2TP_ATTR_PW_TYPE, /* u16, enum l2tp_pwtype */
+ L2TP_ATTR_ENCAP_TYPE, /* u16, enum l2tp_encap_type */
+ L2TP_ATTR_OFFSET, /* u16 */
+ L2TP_ATTR_DATA_SEQ, /* u16 */
+ L2TP_ATTR_L2SPEC_TYPE, /* u8, enum l2tp_l2spec_type */
+ L2TP_ATTR_L2SPEC_LEN, /* u8, enum l2tp_l2spec_type */
+ L2TP_ATTR_PROTO_VERSION, /* u8 */
+ L2TP_ATTR_IFNAME, /* string */
+ L2TP_ATTR_CONN_ID, /* u32 */
+ L2TP_ATTR_PEER_CONN_ID, /* u32 */
+ L2TP_ATTR_SESSION_ID, /* u32 */
+ L2TP_ATTR_PEER_SESSION_ID, /* u32 */
+ L2TP_ATTR_UDP_CSUM, /* u8 */
+ L2TP_ATTR_VLAN_ID, /* u16 */
+ L2TP_ATTR_COOKIE, /* 0, 4 or 8 bytes */
+ L2TP_ATTR_PEER_COOKIE, /* 0, 4 or 8 bytes */
+ L2TP_ATTR_DEBUG, /* u32 */
+ L2TP_ATTR_RECV_SEQ, /* u8 */
+ L2TP_ATTR_SEND_SEQ, /* u8 */
+ L2TP_ATTR_LNS_MODE, /* u8 */
+ L2TP_ATTR_USING_IPSEC, /* u8 */
+ L2TP_ATTR_RECV_TIMEOUT, /* msec */
+ L2TP_ATTR_FD, /* int */
+ L2TP_ATTR_IP_SADDR, /* u32 */
+ L2TP_ATTR_IP_DADDR, /* u32 */
+ L2TP_ATTR_UDP_SPORT, /* u16 */
+ L2TP_ATTR_UDP_DPORT, /* u16 */
+ L2TP_ATTR_MTU, /* u16 */
+ L2TP_ATTR_MRU, /* u16 */
+ L2TP_ATTR_STATS, /* nested */
+ L2TP_ATTR_IP6_SADDR, /* struct in6_addr */
+ L2TP_ATTR_IP6_DADDR, /* struct in6_addr */
+ __L2TP_ATTR_MAX,
+};
+
+#define L2TP_ATTR_MAX (__L2TP_ATTR_MAX - 1)
+
+/* Nested in L2TP_ATTR_STATS */
+enum {
+ L2TP_ATTR_STATS_NONE, /* no data */
+ L2TP_ATTR_TX_PACKETS, /* u64 */
+ L2TP_ATTR_TX_BYTES, /* u64 */
+ L2TP_ATTR_TX_ERRORS, /* u64 */
+ L2TP_ATTR_RX_PACKETS, /* u64 */
+ L2TP_ATTR_RX_BYTES, /* u64 */
+ L2TP_ATTR_RX_SEQ_DISCARDS, /* u64 */
+ L2TP_ATTR_RX_OOS_PACKETS, /* u64 */
+ L2TP_ATTR_RX_ERRORS, /* u64 */
+ __L2TP_ATTR_STATS_MAX,
+};
+
+#define L2TP_ATTR_STATS_MAX (__L2TP_ATTR_STATS_MAX - 1)
+
+enum l2tp_pwtype {
+ L2TP_PWTYPE_NONE = 0x0000,
+ L2TP_PWTYPE_ETH_VLAN = 0x0004,
+ L2TP_PWTYPE_ETH = 0x0005,
+ L2TP_PWTYPE_PPP = 0x0007,
+ L2TP_PWTYPE_PPP_AC = 0x0008,
+ L2TP_PWTYPE_IP = 0x000b,
+ __L2TP_PWTYPE_MAX
+};
+
+enum l2tp_l2spec_type {
+ L2TP_L2SPECTYPE_NONE,
+ L2TP_L2SPECTYPE_DEFAULT,
+};
+
+enum l2tp_encap_type {
+ L2TP_ENCAPTYPE_UDP,
+ L2TP_ENCAPTYPE_IP,
+};
+
+enum l2tp_seqmode {
+ L2TP_SEQ_NONE = 0,
+ L2TP_SEQ_IP = 1,
+ L2TP_SEQ_ALL = 2,
+};
+
+/*
+ * NETLINK_GENERIC related info
+ */
+#define L2TP_GENL_NAME "l2tp"
+#define L2TP_GENL_VERSION 0x1
+
+#endif /* _UAPI_LINUX_L2TP_H_ */
diff --git a/include/linux/limits.h b/include/uapi/linux/limits.h
similarity index 100%
rename from include/linux/limits.h
rename to include/uapi/linux/limits.h
diff --git a/include/uapi/linux/llc.h b/include/uapi/linux/llc.h
new file mode 100644
index 0000000..9c987a4
--- /dev/null
+++ b/include/uapi/linux/llc.h
@@ -0,0 +1,84 @@
+/*
+ * IEEE 802.2 User Interface SAPs for Linux, data structures and indicators.
+ *
+ * Copyright (c) 2001 by Jay Schulist <jschlst@samba.org>
+ *
+ * This program can be redistributed or modified under the terms of the
+ * GNU General Public License as published by the Free Software Foundation.
+ * This program is distributed without any warranty or implied warranty
+ * of merchantability or fitness for a particular purpose.
+ *
+ * See the GNU General Public License for more details.
+ */
+#ifndef _UAPI__LINUX_LLC_H
+#define _UAPI__LINUX_LLC_H
+
+#include <linux/socket.h>
+
+#define __LLC_SOCK_SIZE__ 16 /* sizeof(sockaddr_llc), word align. */
+struct sockaddr_llc {
+ __kernel_sa_family_t sllc_family; /* AF_LLC */
+ __kernel_sa_family_t sllc_arphrd; /* ARPHRD_ETHER */
+ unsigned char sllc_test;
+ unsigned char sllc_xid;
+ unsigned char sllc_ua; /* UA data, only for SOCK_STREAM. */
+ unsigned char sllc_sap;
+ unsigned char sllc_mac[IFHWADDRLEN];
+ unsigned char __pad[__LLC_SOCK_SIZE__ -
+ sizeof(__kernel_sa_family_t) * 2 -
+ sizeof(unsigned char) * 4 - IFHWADDRLEN];
+};
+
+/* sockopt definitions. */
+enum llc_sockopts {
+ LLC_OPT_UNKNOWN = 0,
+ LLC_OPT_RETRY, /* max retrans attempts. */
+ LLC_OPT_SIZE, /* max PDU size (octets). */
+ LLC_OPT_ACK_TMR_EXP, /* ack expire time (secs). */
+ LLC_OPT_P_TMR_EXP, /* pf cycle expire time (secs). */
+ LLC_OPT_REJ_TMR_EXP, /* rej sent expire time (secs). */
+ LLC_OPT_BUSY_TMR_EXP, /* busy state expire time (secs). */
+ LLC_OPT_TX_WIN, /* tx window size. */
+ LLC_OPT_RX_WIN, /* rx window size. */
+ LLC_OPT_PKTINFO, /* ancillary packet information. */
+ LLC_OPT_MAX
+};
+
+#define LLC_OPT_MAX_RETRY 100
+#define LLC_OPT_MAX_SIZE 4196
+#define LLC_OPT_MAX_WIN 127
+#define LLC_OPT_MAX_ACK_TMR_EXP 60
+#define LLC_OPT_MAX_P_TMR_EXP 60
+#define LLC_OPT_MAX_REJ_TMR_EXP 60
+#define LLC_OPT_MAX_BUSY_TMR_EXP 60
+
+/* LLC SAP types. */
+#define LLC_SAP_NULL 0x00 /* NULL SAP. */
+#define LLC_SAP_LLC 0x02 /* LLC Sublayer Management. */
+#define LLC_SAP_SNA 0x04 /* SNA Path Control. */
+#define LLC_SAP_PNM 0x0E /* Proway Network Management. */
+#define LLC_SAP_IP 0x06 /* TCP/IP. */
+#define LLC_SAP_BSPAN 0x42 /* Bridge Spanning Tree Proto */
+#define LLC_SAP_MMS 0x4E /* Manufacturing Message Srv. */
+#define LLC_SAP_8208 0x7E /* ISO 8208 */
+#define LLC_SAP_3COM 0x80 /* 3COM. */
+#define LLC_SAP_PRO 0x8E /* Proway Active Station List */
+#define LLC_SAP_SNAP 0xAA /* SNAP. */
+#define LLC_SAP_BANYAN 0xBC /* Banyan. */
+#define LLC_SAP_IPX 0xE0 /* IPX/SPX. */
+#define LLC_SAP_NETBEUI 0xF0 /* NetBEUI. */
+#define LLC_SAP_LANMGR 0xF4 /* LanManager. */
+#define LLC_SAP_IMPL 0xF8 /* IMPL */
+#define LLC_SAP_DISC 0xFC /* Discovery */
+#define LLC_SAP_OSI 0xFE /* OSI Network Layers. */
+#define LLC_SAP_LAR 0xDC /* LAN Address Resolution */
+#define LLC_SAP_RM 0xD4 /* Resource Management */
+#define LLC_SAP_GLOBAL 0xFF /* Global SAP. */
+
+struct llc_pktinfo {
+ int lpi_ifindex;
+ unsigned char lpi_sap;
+ unsigned char lpi_mac[IFHWADDRLEN];
+};
+
+#endif /* _UAPI__LINUX_LLC_H */
diff --git a/include/uapi/linux/loop.h b/include/uapi/linux/loop.h
new file mode 100644
index 0000000..e0cecd2
--- /dev/null
+++ b/include/uapi/linux/loop.h
@@ -0,0 +1,94 @@
+/*
+ * include/linux/loop.h
+ *
+ * Written by Theodore Ts'o, 3/29/93.
+ *
+ * Copyright 1993 by Theodore Ts'o. Redistribution of this file is
+ * permitted under the GNU General Public License.
+ */
+#ifndef _UAPI_LINUX_LOOP_H
+#define _UAPI_LINUX_LOOP_H
+
+
+#define LO_NAME_SIZE 64
+#define LO_KEY_SIZE 32
+
+
+/*
+ * Loop flags
+ */
+enum {
+ LO_FLAGS_READ_ONLY = 1,
+ LO_FLAGS_AUTOCLEAR = 4,
+ LO_FLAGS_PARTSCAN = 8,
+};
+
+#include <asm/posix_types.h> /* for __kernel_old_dev_t */
+#include <linux/types.h> /* for __u64 */
+
+/* Backwards compatibility version */
+struct loop_info {
+ int lo_number; /* ioctl r/o */
+ __kernel_old_dev_t lo_device; /* ioctl r/o */
+ unsigned long lo_inode; /* ioctl r/o */
+ __kernel_old_dev_t lo_rdevice; /* ioctl r/o */
+ int lo_offset;
+ int lo_encrypt_type;
+ int lo_encrypt_key_size; /* ioctl w/o */
+ int lo_flags; /* ioctl r/o */
+ char lo_name[LO_NAME_SIZE];
+ unsigned char lo_encrypt_key[LO_KEY_SIZE]; /* ioctl w/o */
+ unsigned long lo_init[2];
+ char reserved[4];
+};
+
+struct loop_info64 {
+ __u64 lo_device; /* ioctl r/o */
+ __u64 lo_inode; /* ioctl r/o */
+ __u64 lo_rdevice; /* ioctl r/o */
+ __u64 lo_offset;
+ __u64 lo_sizelimit;/* bytes, 0 == max available */
+ __u32 lo_number; /* ioctl r/o */
+ __u32 lo_encrypt_type;
+ __u32 lo_encrypt_key_size; /* ioctl w/o */
+ __u32 lo_flags; /* ioctl r/o */
+ __u8 lo_file_name[LO_NAME_SIZE];
+ __u8 lo_crypt_name[LO_NAME_SIZE];
+ __u8 lo_encrypt_key[LO_KEY_SIZE]; /* ioctl w/o */
+ __u64 lo_init[2];
+};
+
+/*
+ * Loop filter types
+ */
+
+#define LO_CRYPT_NONE 0
+#define LO_CRYPT_XOR 1
+#define LO_CRYPT_DES 2
+#define LO_CRYPT_FISH2 3 /* Twofish encryption */
+#define LO_CRYPT_BLOW 4
+#define LO_CRYPT_CAST128 5
+#define LO_CRYPT_IDEA 6
+#define LO_CRYPT_DUMMY 9
+#define LO_CRYPT_SKIPJACK 10
+#define LO_CRYPT_CRYPTOAPI 18
+#define MAX_LO_CRYPT 20
+
+/*
+ * IOCTL commands --- we will commandeer 0x4C ('L')
+ */
+
+#define LOOP_SET_FD 0x4C00
+#define LOOP_CLR_FD 0x4C01
+#define LOOP_SET_STATUS 0x4C02
+#define LOOP_GET_STATUS 0x4C03
+#define LOOP_SET_STATUS64 0x4C04
+#define LOOP_GET_STATUS64 0x4C05
+#define LOOP_CHANGE_FD 0x4C06
+#define LOOP_SET_CAPACITY 0x4C07
+
+/* /dev/loop-control interface */
+#define LOOP_CTL_ADD 0x4C80
+#define LOOP_CTL_REMOVE 0x4C81
+#define LOOP_CTL_GET_FREE 0x4C82
+#endif /* _UAPI_LINUX_LOOP_H */
diff --git a/include/uapi/linux/lp.h b/include/uapi/linux/lp.h
new file mode 100644
index 0000000..a3406a5
--- /dev/null
+++ b/include/uapi/linux/lp.h
@@ -0,0 +1,100 @@
+/*
+ * usr/include/linux/lp.h c.1991-1992 James Wiegand
+ * many modifications copyright (C) 1992 Michael K. Johnson
+ * Interrupt support added 1993 Nigel Gamble
+ * Removed 8255 status defines from inside __KERNEL__ Marcelo Tosatti
+ */
+#ifndef _UAPI_LINUX_LP_H
+#define _UAPI_LINUX_LP_H
+
+
+/*
+ * Per POSIX guidelines, this module reserves the LP and lp prefixes
+ * These are the lp_table[minor].flags flags...
+ */
+#define LP_EXIST 0x0001
+#define LP_SELEC 0x0002
+#define LP_BUSY 0x0004
+#define LP_BUSY_BIT_POS 2
+#define LP_OFFL 0x0008
+#define LP_NOPA 0x0010
+#define LP_ERR 0x0020
+#define LP_ABORT 0x0040
+#define LP_CAREFUL 0x0080 /* obsoleted -arca */
+#define LP_ABORTOPEN 0x0100
+
+#define LP_TRUST_IRQ_ 0x0200 /* obsolete */
+#define LP_NO_REVERSE 0x0400 /* No reverse mode available. */
+#define LP_DATA_AVAIL 0x0800 /* Data is available. */
+
+/*
+ * bit defines for 8255 status port
+ * base + 1
+ * accessed with LP_S(minor), which gets the byte...
+ */
+#define LP_PBUSY 0x80 /* inverted input, active high */
+#define LP_PACK 0x40 /* unchanged input, active low */
+#define LP_POUTPA 0x20 /* unchanged input, active high */
+#define LP_PSELECD 0x10 /* unchanged input, active high */
+#define LP_PERRORP 0x08 /* unchanged input, active low */
+
+/* timeout for each character. This is relative to bus cycles -- it
+ * is the count in a busy loop. THIS IS THE VALUE TO CHANGE if you
+ * have extremely slow printing, or if the machine seems to slow down
+ * a lot when you print. If you have slow printing, increase this
+ * number and recompile, and if your system gets bogged down, decrease
+ * this number. This can be changed with the tunelp(8) command as well.
+ */
+
+#define LP_INIT_CHAR 1000
+
+/* The parallel port specs apparently say that there needs to be
+ * a .5usec wait before and after the strobe.
+ */
+
+#define LP_INIT_WAIT 1
+
+/* This is the amount of time that the driver waits for the printer to
+ * catch up when the printer's buffer appears to be filled. If you
+ * want to tune this and have a fast printer (i.e. HPIIIP), decrease
+ * this number, and if you have a slow printer, increase this number.
+ * This is in hundredths of a second, the default 2 being .05 second.
+ * Or use the tunelp(8) command, which is especially nice if you want
+ * change back and forth between character and graphics printing, which
+ * are wildly different...
+ */
+
+#define LP_INIT_TIME 2
+
+/* IOCTL numbers */
+#define LPCHAR 0x0601 /* corresponds to LP_INIT_CHAR */
+#define LPTIME 0x0602 /* corresponds to LP_INIT_TIME */
+#define LPABORT 0x0604 /* call with TRUE arg to abort on error,
+ FALSE to retry. Default is retry. */
+#define LPSETIRQ 0x0605 /* call with new IRQ number,
+ or 0 for polling (no IRQ) */
+#define LPGETIRQ 0x0606 /* get the current IRQ number */
+#define LPWAIT 0x0608 /* corresponds to LP_INIT_WAIT */
+/* NOTE: LPCAREFUL is obsoleted and it' s always the default right now -arca */
+#define LPCAREFUL 0x0609 /* call with TRUE arg to require out-of-paper, off-
+ line, and error indicators good on all writes,
+ FALSE to ignore them. Default is ignore. */
+#define LPABORTOPEN 0x060a /* call with TRUE arg to abort open() on error,
+ FALSE to ignore error. Default is ignore. */
+#define LPGETSTATUS 0x060b /* return LP_S(minor) */
+#define LPRESET 0x060c /* reset printer */
+#ifdef LP_STATS
+#define LPGETSTATS 0x060d /* get statistics (struct lp_stats) */
+#endif
+#define LPGETFLAGS 0x060e /* get status flags */
+#define LPSETTIMEOUT 0x060f /* set parport timeout */
+
+/* timeout for printk'ing a timeout, in jiffies (100ths of a second).
+ This is also used for re-checking error conditions if LP_ABORT is
+ not set. This is the default behavior. */
+
+#define LP_TIMEOUT_INTERRUPT (60 * HZ)
+#define LP_TIMEOUT_POLLED (10 * HZ)
+
+
+#endif /* _UAPI_LINUX_LP_H */
diff --git a/include/linux/magic.h b/include/uapi/linux/magic.h
similarity index 100%
rename from include/linux/magic.h
rename to include/uapi/linux/magic.h
diff --git a/include/linux/major.h b/include/uapi/linux/major.h
similarity index 100%
rename from include/linux/major.h
rename to include/uapi/linux/major.h
diff --git a/include/linux/map_to_7segment.h b/include/uapi/linux/map_to_7segment.h
similarity index 100%
rename from include/linux/map_to_7segment.h
rename to include/uapi/linux/map_to_7segment.h
diff --git a/include/linux/matroxfb.h b/include/uapi/linux/matroxfb.h
similarity index 100%
rename from include/linux/matroxfb.h
rename to include/uapi/linux/matroxfb.h
diff --git a/include/uapi/linux/mdio.h b/include/uapi/linux/mdio.h
new file mode 100644
index 0000000..c94a510
--- /dev/null
+++ b/include/uapi/linux/mdio.h
@@ -0,0 +1,297 @@
+/*
+ * linux/mdio.h: definitions for MDIO (clause 45) transceivers
+ * Copyright 2006-2009 Solarflare Communications Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation, incorporated herein by reference.
+ */
+
+#ifndef _UAPI__LINUX_MDIO_H__
+#define _UAPI__LINUX_MDIO_H__
+
+#include <linux/types.h>
+#include <linux/mii.h>
+
+/* MDIO Manageable Devices (MMDs). */
+#define MDIO_MMD_PMAPMD 1 /* Physical Medium Attachment/
+ * Physical Medium Dependent */
+#define MDIO_MMD_WIS 2 /* WAN Interface Sublayer */
+#define MDIO_MMD_PCS 3 /* Physical Coding Sublayer */
+#define MDIO_MMD_PHYXS 4 /* PHY Extender Sublayer */
+#define MDIO_MMD_DTEXS 5 /* DTE Extender Sublayer */
+#define MDIO_MMD_TC 6 /* Transmission Convergence */
+#define MDIO_MMD_AN 7 /* Auto-Negotiation */
+#define MDIO_MMD_C22EXT 29 /* Clause 22 extension */
+#define MDIO_MMD_VEND1 30 /* Vendor specific 1 */
+#define MDIO_MMD_VEND2 31 /* Vendor specific 2 */
+
+/* Generic MDIO registers. */
+#define MDIO_CTRL1 MII_BMCR
+#define MDIO_STAT1 MII_BMSR
+#define MDIO_DEVID1 MII_PHYSID1
+#define MDIO_DEVID2 MII_PHYSID2
+#define MDIO_SPEED 4 /* Speed ability */
+#define MDIO_DEVS1 5 /* Devices in package */
+#define MDIO_DEVS2 6
+#define MDIO_CTRL2 7 /* 10G control 2 */
+#define MDIO_STAT2 8 /* 10G status 2 */
+#define MDIO_PMA_TXDIS 9 /* 10G PMA/PMD transmit disable */
+#define MDIO_PMA_RXDET 10 /* 10G PMA/PMD receive signal detect */
+#define MDIO_PMA_EXTABLE 11 /* 10G PMA/PMD extended ability */
+#define MDIO_PKGID1 14 /* Package identifier */
+#define MDIO_PKGID2 15
+#define MDIO_AN_ADVERTISE 16 /* AN advertising (base page) */
+#define MDIO_AN_LPA 19 /* AN LP abilities (base page) */
+#define MDIO_PCS_EEE_ABLE 20 /* EEE Capability register */
+#define MDIO_PCS_EEE_WK_ERR 22 /* EEE wake error counter */
+#define MDIO_PHYXS_LNSTAT 24 /* PHY XGXS lane state */
+#define MDIO_AN_EEE_ADV 60 /* EEE advertisement */
+#define MDIO_AN_EEE_LPABLE 61 /* EEE link partner ability */
+
+/* Media-dependent registers. */
+#define MDIO_PMA_10GBT_SWAPPOL 130 /* 10GBASE-T pair swap & polarity */
+#define MDIO_PMA_10GBT_TXPWR 131 /* 10GBASE-T TX power control */
+#define MDIO_PMA_10GBT_SNR 133 /* 10GBASE-T SNR margin, lane A.
+ * Lanes B-D are numbered 134-136. */
+#define MDIO_PMA_10GBR_FECABLE 170 /* 10GBASE-R FEC ability */
+#define MDIO_PCS_10GBX_STAT1 24 /* 10GBASE-X PCS status 1 */
+#define MDIO_PCS_10GBRT_STAT1 32 /* 10GBASE-R/-T PCS status 1 */
+#define MDIO_PCS_10GBRT_STAT2 33 /* 10GBASE-R/-T PCS status 2 */
+#define MDIO_AN_10GBT_CTRL 32 /* 10GBASE-T auto-negotiation control */
+#define MDIO_AN_10GBT_STAT 33 /* 10GBASE-T auto-negotiation status */
+
+/* LASI (Link Alarm Status Interrupt) registers, defined by XENPAK MSA. */
+#define MDIO_PMA_LASI_RXCTRL 0x9000 /* RX_ALARM control */
+#define MDIO_PMA_LASI_TXCTRL 0x9001 /* TX_ALARM control */
+#define MDIO_PMA_LASI_CTRL 0x9002 /* LASI control */
+#define MDIO_PMA_LASI_RXSTAT 0x9003 /* RX_ALARM status */
+#define MDIO_PMA_LASI_TXSTAT 0x9004 /* TX_ALARM status */
+#define MDIO_PMA_LASI_STAT 0x9005 /* LASI status */
+
+/* Control register 1. */
+/* Enable extended speed selection */
+#define MDIO_CTRL1_SPEEDSELEXT (BMCR_SPEED1000 | BMCR_SPEED100)
+/* All speed selection bits */
+#define MDIO_CTRL1_SPEEDSEL (MDIO_CTRL1_SPEEDSELEXT | 0x003c)
+#define MDIO_CTRL1_FULLDPLX BMCR_FULLDPLX
+#define MDIO_CTRL1_LPOWER BMCR_PDOWN
+#define MDIO_CTRL1_RESET BMCR_RESET
+#define MDIO_PMA_CTRL1_LOOPBACK 0x0001
+#define MDIO_PMA_CTRL1_SPEED1000 BMCR_SPEED1000
+#define MDIO_PMA_CTRL1_SPEED100 BMCR_SPEED100
+#define MDIO_PCS_CTRL1_LOOPBACK BMCR_LOOPBACK
+#define MDIO_PHYXS_CTRL1_LOOPBACK BMCR_LOOPBACK
+#define MDIO_AN_CTRL1_RESTART BMCR_ANRESTART
+#define MDIO_AN_CTRL1_ENABLE BMCR_ANENABLE
+#define MDIO_AN_CTRL1_XNP 0x2000 /* Enable extended next page */
+#define MDIO_PCS_CTRL1_CLKSTOP_EN 0x400 /* Stop the clock during LPI */
+
+/* 10 Gb/s */
+#define MDIO_CTRL1_SPEED10G (MDIO_CTRL1_SPEEDSELEXT | 0x00)
+/* 10PASS-TS/2BASE-TL */
+#define MDIO_CTRL1_SPEED10P2B (MDIO_CTRL1_SPEEDSELEXT | 0x04)
+
+/* Status register 1. */
+#define MDIO_STAT1_LPOWERABLE 0x0002 /* Low-power ability */
+#define MDIO_STAT1_LSTATUS BMSR_LSTATUS
+#define MDIO_STAT1_FAULT 0x0080 /* Fault */
+#define MDIO_AN_STAT1_LPABLE 0x0001 /* Link partner AN ability */
+#define MDIO_AN_STAT1_ABLE BMSR_ANEGCAPABLE
+#define MDIO_AN_STAT1_RFAULT BMSR_RFAULT
+#define MDIO_AN_STAT1_COMPLETE BMSR_ANEGCOMPLETE
+#define MDIO_AN_STAT1_PAGE 0x0040 /* Page received */
+#define MDIO_AN_STAT1_XNP 0x0080 /* Extended next page status */
+
+/* Speed register. */
+#define MDIO_SPEED_10G 0x0001 /* 10G capable */
+#define MDIO_PMA_SPEED_2B 0x0002 /* 2BASE-TL capable */
+#define MDIO_PMA_SPEED_10P 0x0004 /* 10PASS-TS capable */
+#define MDIO_PMA_SPEED_1000 0x0010 /* 1000M capable */
+#define MDIO_PMA_SPEED_100 0x0020 /* 100M capable */
+#define MDIO_PMA_SPEED_10 0x0040 /* 10M capable */
+#define MDIO_PCS_SPEED_10P2B 0x0002 /* 10PASS-TS/2BASE-TL capable */
+
+/* Device present registers. */
+#define MDIO_DEVS_PRESENT(devad) (1 << (devad))
+#define MDIO_DEVS_PMAPMD MDIO_DEVS_PRESENT(MDIO_MMD_PMAPMD)
+#define MDIO_DEVS_WIS MDIO_DEVS_PRESENT(MDIO_MMD_WIS)
+#define MDIO_DEVS_PCS MDIO_DEVS_PRESENT(MDIO_MMD_PCS)
+#define MDIO_DEVS_PHYXS MDIO_DEVS_PRESENT(MDIO_MMD_PHYXS)
+#define MDIO_DEVS_DTEXS MDIO_DEVS_PRESENT(MDIO_MMD_DTEXS)
+#define MDIO_DEVS_TC MDIO_DEVS_PRESENT(MDIO_MMD_TC)
+#define MDIO_DEVS_AN MDIO_DEVS_PRESENT(MDIO_MMD_AN)
+#define MDIO_DEVS_C22EXT MDIO_DEVS_PRESENT(MDIO_MMD_C22EXT)
+
+/* Control register 2. */
+#define MDIO_PMA_CTRL2_TYPE 0x000f /* PMA/PMD type selection */
+#define MDIO_PMA_CTRL2_10GBCX4 0x0000 /* 10GBASE-CX4 type */
+#define MDIO_PMA_CTRL2_10GBEW 0x0001 /* 10GBASE-EW type */
+#define MDIO_PMA_CTRL2_10GBLW 0x0002 /* 10GBASE-LW type */
+#define MDIO_PMA_CTRL2_10GBSW 0x0003 /* 10GBASE-SW type */
+#define MDIO_PMA_CTRL2_10GBLX4 0x0004 /* 10GBASE-LX4 type */
+#define MDIO_PMA_CTRL2_10GBER 0x0005 /* 10GBASE-ER type */
+#define MDIO_PMA_CTRL2_10GBLR 0x0006 /* 10GBASE-LR type */
+#define MDIO_PMA_CTRL2_10GBSR 0x0007 /* 10GBASE-SR type */
+#define MDIO_PMA_CTRL2_10GBLRM 0x0008 /* 10GBASE-LRM type */
+#define MDIO_PMA_CTRL2_10GBT 0x0009 /* 10GBASE-T type */
+#define MDIO_PMA_CTRL2_10GBKX4 0x000a /* 10GBASE-KX4 type */
+#define MDIO_PMA_CTRL2_10GBKR 0x000b /* 10GBASE-KR type */
+#define MDIO_PMA_CTRL2_1000BT 0x000c /* 1000BASE-T type */
+#define MDIO_PMA_CTRL2_1000BKX 0x000d /* 1000BASE-KX type */
+#define MDIO_PMA_CTRL2_100BTX 0x000e /* 100BASE-TX type */
+#define MDIO_PMA_CTRL2_10BT 0x000f /* 10BASE-T type */
+#define MDIO_PCS_CTRL2_TYPE 0x0003 /* PCS type selection */
+#define MDIO_PCS_CTRL2_10GBR 0x0000 /* 10GBASE-R type */
+#define MDIO_PCS_CTRL2_10GBX 0x0001 /* 10GBASE-X type */
+#define MDIO_PCS_CTRL2_10GBW 0x0002 /* 10GBASE-W type */
+#define MDIO_PCS_CTRL2_10GBT 0x0003 /* 10GBASE-T type */
+
+/* Status register 2. */
+#define MDIO_STAT2_RXFAULT 0x0400 /* Receive fault */
+#define MDIO_STAT2_TXFAULT 0x0800 /* Transmit fault */
+#define MDIO_STAT2_DEVPRST 0xc000 /* Device present */
+#define MDIO_STAT2_DEVPRST_VAL 0x8000 /* Device present value */
+#define MDIO_PMA_STAT2_LBABLE 0x0001 /* PMA loopback ability */
+#define MDIO_PMA_STAT2_10GBEW 0x0002 /* 10GBASE-EW ability */
+#define MDIO_PMA_STAT2_10GBLW 0x0004 /* 10GBASE-LW ability */
+#define MDIO_PMA_STAT2_10GBSW 0x0008 /* 10GBASE-SW ability */
+#define MDIO_PMA_STAT2_10GBLX4 0x0010 /* 10GBASE-LX4 ability */
+#define MDIO_PMA_STAT2_10GBER 0x0020 /* 10GBASE-ER ability */
+#define MDIO_PMA_STAT2_10GBLR 0x0040 /* 10GBASE-LR ability */
+#define MDIO_PMA_STAT2_10GBSR 0x0080 /* 10GBASE-SR ability */
+#define MDIO_PMD_STAT2_TXDISAB 0x0100 /* PMD TX disable ability */
+#define MDIO_PMA_STAT2_EXTABLE 0x0200 /* Extended abilities */
+#define MDIO_PMA_STAT2_RXFLTABLE 0x1000 /* Receive fault ability */
+#define MDIO_PMA_STAT2_TXFLTABLE 0x2000 /* Transmit fault ability */
+#define MDIO_PCS_STAT2_10GBR 0x0001 /* 10GBASE-R capable */
+#define MDIO_PCS_STAT2_10GBX 0x0002 /* 10GBASE-X capable */
+#define MDIO_PCS_STAT2_10GBW 0x0004 /* 10GBASE-W capable */
+#define MDIO_PCS_STAT2_RXFLTABLE 0x1000 /* Receive fault ability */
+#define MDIO_PCS_STAT2_TXFLTABLE 0x2000 /* Transmit fault ability */
+
+/* Transmit disable register. */
+#define MDIO_PMD_TXDIS_GLOBAL 0x0001 /* Global PMD TX disable */
+#define MDIO_PMD_TXDIS_0 0x0002 /* PMD TX disable 0 */
+#define MDIO_PMD_TXDIS_1 0x0004 /* PMD TX disable 1 */
+#define MDIO_PMD_TXDIS_2 0x0008 /* PMD TX disable 2 */
+#define MDIO_PMD_TXDIS_3 0x0010 /* PMD TX disable 3 */
+
+/* Receive signal detect register. */
+#define MDIO_PMD_RXDET_GLOBAL 0x0001 /* Global PMD RX signal detect */
+#define MDIO_PMD_RXDET_0 0x0002 /* PMD RX signal detect 0 */
+#define MDIO_PMD_RXDET_1 0x0004 /* PMD RX signal detect 1 */
+#define MDIO_PMD_RXDET_2 0x0008 /* PMD RX signal detect 2 */
+#define MDIO_PMD_RXDET_3 0x0010 /* PMD RX signal detect 3 */
+
+/* Extended abilities register. */
+#define MDIO_PMA_EXTABLE_10GCX4 0x0001 /* 10GBASE-CX4 ability */
+#define MDIO_PMA_EXTABLE_10GBLRM 0x0002 /* 10GBASE-LRM ability */
+#define MDIO_PMA_EXTABLE_10GBT 0x0004 /* 10GBASE-T ability */
+#define MDIO_PMA_EXTABLE_10GBKX4 0x0008 /* 10GBASE-KX4 ability */
+#define MDIO_PMA_EXTABLE_10GBKR 0x0010 /* 10GBASE-KR ability */
+#define MDIO_PMA_EXTABLE_1000BT 0x0020 /* 1000BASE-T ability */
+#define MDIO_PMA_EXTABLE_1000BKX 0x0040 /* 1000BASE-KX ability */
+#define MDIO_PMA_EXTABLE_100BTX 0x0080 /* 100BASE-TX ability */
+#define MDIO_PMA_EXTABLE_10BT 0x0100 /* 10BASE-T ability */
+
+/* PHY XGXS lane state register. */
+#define MDIO_PHYXS_LNSTAT_SYNC0 0x0001
+#define MDIO_PHYXS_LNSTAT_SYNC1 0x0002
+#define MDIO_PHYXS_LNSTAT_SYNC2 0x0004
+#define MDIO_PHYXS_LNSTAT_SYNC3 0x0008
+#define MDIO_PHYXS_LNSTAT_ALIGN 0x1000
+
+/* PMA 10GBASE-T pair swap & polarity */
+#define MDIO_PMA_10GBT_SWAPPOL_ABNX 0x0001 /* Pair A/B uncrossed */
+#define MDIO_PMA_10GBT_SWAPPOL_CDNX 0x0002 /* Pair C/D uncrossed */
+#define MDIO_PMA_10GBT_SWAPPOL_AREV 0x0100 /* Pair A polarity reversed */
+#define MDIO_PMA_10GBT_SWAPPOL_BREV 0x0200 /* Pair B polarity reversed */
+#define MDIO_PMA_10GBT_SWAPPOL_CREV 0x0400 /* Pair C polarity reversed */
+#define MDIO_PMA_10GBT_SWAPPOL_DREV 0x0800 /* Pair D polarity reversed */
+
+/* PMA 10GBASE-T TX power register. */
+#define MDIO_PMA_10GBT_TXPWR_SHORT 0x0001 /* Short-reach mode */
+
+/* PMA 10GBASE-T SNR registers. */
+/* Value is SNR margin in dB, clamped to range [-127, 127], plus 0x8000. */
+#define MDIO_PMA_10GBT_SNR_BIAS 0x8000
+#define MDIO_PMA_10GBT_SNR_MAX 127
+
+/* PMA 10GBASE-R FEC ability register. */
+#define MDIO_PMA_10GBR_FECABLE_ABLE 0x0001 /* FEC ability */
+#define MDIO_PMA_10GBR_FECABLE_ERRABLE 0x0002 /* FEC error indic. ability */
+
+/* PCS 10GBASE-R/-T status register 1. */
+#define MDIO_PCS_10GBRT_STAT1_BLKLK 0x0001 /* Block lock attained */
+
+/* PCS 10GBASE-R/-T status register 2. */
+#define MDIO_PCS_10GBRT_STAT2_ERR 0x00ff
+#define MDIO_PCS_10GBRT_STAT2_BER 0x3f00
+
+/* AN 10GBASE-T control register. */
+#define MDIO_AN_10GBT_CTRL_ADV10G 0x1000 /* Advertise 10GBASE-T */
+
+/* AN 10GBASE-T status register. */
+#define MDIO_AN_10GBT_STAT_LPTRR 0x0200 /* LP training reset req. */
+#define MDIO_AN_10GBT_STAT_LPLTABLE 0x0400 /* LP loop timing ability */
+#define MDIO_AN_10GBT_STAT_LP10G 0x0800 /* LP is 10GBT capable */
+#define MDIO_AN_10GBT_STAT_REMOK 0x1000 /* Remote OK */
+#define MDIO_AN_10GBT_STAT_LOCOK 0x2000 /* Local OK */
+#define MDIO_AN_10GBT_STAT_MS 0x4000 /* Master/slave config */
+#define MDIO_AN_10GBT_STAT_MSFLT 0x8000 /* Master/slave config fault */
+
+/* EEE Supported/Advertisement/LP Advertisement registers.
+ *
+ * EEE capability Register (3.20), Advertisement (7.60) and
+ * Link partner ability (7.61) registers have and can use the same identical
+ * bit masks.
+ */
+#define MDIO_AN_EEE_ADV_100TX 0x0002 /* Advertise 100TX EEE cap */
+#define MDIO_AN_EEE_ADV_1000T 0x0004 /* Advertise 1000T EEE cap */
+/* Note: the two defines above can be potentially used by the user-land
+ * and cannot remove them now.
+ * So, we define the new generic MDIO_EEE_100TX and MDIO_EEE_1000T macros
+ * using the previous ones (that can be considered obsolete).
+ */
+#define MDIO_EEE_100TX MDIO_AN_EEE_ADV_100TX /* 100TX EEE cap */
+#define MDIO_EEE_1000T MDIO_AN_EEE_ADV_1000T /* 1000T EEE cap */
+#define MDIO_EEE_10GT 0x0008 /* 10GT EEE cap */
+#define MDIO_EEE_1000KX 0x0010 /* 1000KX EEE cap */
+#define MDIO_EEE_10GKX4 0x0020 /* 10G KX4 EEE cap */
+#define MDIO_EEE_10GKR 0x0040 /* 10G KR EEE cap */
+
+/* LASI RX_ALARM control/status registers. */
+#define MDIO_PMA_LASI_RX_PHYXSLFLT 0x0001 /* PHY XS RX local fault */
+#define MDIO_PMA_LASI_RX_PCSLFLT 0x0008 /* PCS RX local fault */
+#define MDIO_PMA_LASI_RX_PMALFLT 0x0010 /* PMA/PMD RX local fault */
+#define MDIO_PMA_LASI_RX_OPTICPOWERFLT 0x0020 /* RX optical power fault */
+#define MDIO_PMA_LASI_RX_WISLFLT 0x0200 /* WIS local fault */
+
+/* LASI TX_ALARM control/status registers. */
+#define MDIO_PMA_LASI_TX_PHYXSLFLT 0x0001 /* PHY XS TX local fault */
+#define MDIO_PMA_LASI_TX_PCSLFLT 0x0008 /* PCS TX local fault */
+#define MDIO_PMA_LASI_TX_PMALFLT 0x0010 /* PMA/PMD TX local fault */
+#define MDIO_PMA_LASI_TX_LASERPOWERFLT 0x0080 /* Laser output power fault */
+#define MDIO_PMA_LASI_TX_LASERTEMPFLT 0x0100 /* Laser temperature fault */
+#define MDIO_PMA_LASI_TX_LASERBICURRFLT 0x0200 /* Laser bias current fault */
+
+/* LASI control/status registers. */
+#define MDIO_PMA_LASI_LSALARM 0x0001 /* LS_ALARM enable/status */
+#define MDIO_PMA_LASI_TXALARM 0x0002 /* TX_ALARM enable/status */
+#define MDIO_PMA_LASI_RXALARM 0x0004 /* RX_ALARM enable/status */
+
+/* Mapping between MDIO PRTAD/DEVAD and mii_ioctl_data::phy_id */
+
+#define MDIO_PHY_ID_C45 0x8000
+#define MDIO_PHY_ID_PRTAD 0x03e0
+#define MDIO_PHY_ID_DEVAD 0x001f
+#define MDIO_PHY_ID_C45_MASK \
+ (MDIO_PHY_ID_C45 | MDIO_PHY_ID_PRTAD | MDIO_PHY_ID_DEVAD)
+
+static inline __u16 mdio_phy_id_c45(int prtad, int devad)
+{
+ return MDIO_PHY_ID_C45 | (prtad << 5) | devad;
+}
+
+#endif /* _UAPI__LINUX_MDIO_H__ */
diff --git a/include/linux/media.h b/include/uapi/linux/media.h
similarity index 100%
rename from include/linux/media.h
rename to include/uapi/linux/media.h
diff --git a/include/linux/mei.h b/include/uapi/linux/mei.h
similarity index 100%
rename from include/linux/mei.h
rename to include/uapi/linux/mei.h
diff --git a/include/uapi/linux/mempolicy.h b/include/uapi/linux/mempolicy.h
new file mode 100644
index 0000000..23e62e0
--- /dev/null
+++ b/include/uapi/linux/mempolicy.h
@@ -0,0 +1,64 @@
+/*
+ * NUMA memory policies for Linux.
+ * Copyright 2003,2004 Andi Kleen SuSE Labs
+ */
+#ifndef _UAPI_LINUX_MEMPOLICY_H
+#define _UAPI_LINUX_MEMPOLICY_H
+
+#include <linux/errno.h>
+
+
+/*
+ * Both the MPOL_* mempolicy mode and the MPOL_F_* optional mode flags are
+ * passed by the user to either set_mempolicy() or mbind() in an 'int' actual.
+ * The MPOL_MODE_FLAGS macro determines the legal set of optional mode flags.
+ */
+
+/* Policies */
+enum {
+ MPOL_DEFAULT,
+ MPOL_PREFERRED,
+ MPOL_BIND,
+ MPOL_INTERLEAVE,
+ MPOL_MAX, /* always last member of enum */
+};
+
+enum mpol_rebind_step {
+ MPOL_REBIND_ONCE, /* do rebind work at once(not by two step) */
+ MPOL_REBIND_STEP1, /* first step(set all the newly nodes) */
+ MPOL_REBIND_STEP2, /* second step(clean all the disallowed nodes)*/
+ MPOL_REBIND_NSTEP,
+};
+
+/* Flags for set_mempolicy */
+#define MPOL_F_STATIC_NODES (1 << 15)
+#define MPOL_F_RELATIVE_NODES (1 << 14)
+
+/*
+ * MPOL_MODE_FLAGS is the union of all possible optional mode flags passed to
+ * either set_mempolicy() or mbind().
+ */
+#define MPOL_MODE_FLAGS (MPOL_F_STATIC_NODES | MPOL_F_RELATIVE_NODES)
+
+/* Flags for get_mempolicy */
+#define MPOL_F_NODE (1<<0) /* return next IL mode instead of node mask */
+#define MPOL_F_ADDR (1<<1) /* look up vma using address */
+#define MPOL_F_MEMS_ALLOWED (1<<2) /* return allowed memories */
+
+/* Flags for mbind */
+#define MPOL_MF_STRICT (1<<0) /* Verify existing pages in the mapping */
+#define MPOL_MF_MOVE (1<<1) /* Move pages owned by this process to conform to mapping */
+#define MPOL_MF_MOVE_ALL (1<<2) /* Move every page to conform to mapping */
+#define MPOL_MF_INTERNAL (1<<3) /* Internal flags start here */
+
+/*
+ * Internal flags that share the struct mempolicy flags word with
+ * "mode flags". These flags are allocated from bit 0 up, as they
+ * are never OR'ed into the mode in mempolicy API arguments.
+ */
+#define MPOL_F_SHARED (1 << 0) /* identify shared policies */
+#define MPOL_F_LOCAL (1 << 1) /* preferred local allocation */
+#define MPOL_F_REBINDING (1 << 2) /* identify policies in rebinding */
+
+
+#endif /* _UAPI_LINUX_MEMPOLICY_H */
diff --git a/include/linux/meye.h b/include/uapi/linux/meye.h
similarity index 100%
rename from include/linux/meye.h
rename to include/uapi/linux/meye.h
diff --git a/include/uapi/linux/mii.h b/include/uapi/linux/mii.h
new file mode 100644
index 0000000..237fac4
--- /dev/null
+++ b/include/uapi/linux/mii.h
@@ -0,0 +1,161 @@
+/*
+ * linux/mii.h: definitions for MII-compatible transceivers
+ * Originally drivers/net/sunhme.h.
+ *
+ * Copyright (C) 1996, 1999, 2001 David S. Miller (davem@redhat.com)
+ */
+
+#ifndef _UAPI__LINUX_MII_H__
+#define _UAPI__LINUX_MII_H__
+
+#include <linux/types.h>
+#include <linux/ethtool.h>
+
+/* Generic MII registers. */
+#define MII_BMCR 0x00 /* Basic mode control register */
+#define MII_BMSR 0x01 /* Basic mode status register */
+#define MII_PHYSID1 0x02 /* PHYS ID 1 */
+#define MII_PHYSID2 0x03 /* PHYS ID 2 */
+#define MII_ADVERTISE 0x04 /* Advertisement control reg */
+#define MII_LPA 0x05 /* Link partner ability reg */
+#define MII_EXPANSION 0x06 /* Expansion register */
+#define MII_CTRL1000 0x09 /* 1000BASE-T control */
+#define MII_STAT1000 0x0a /* 1000BASE-T status */
+#define MII_MMD_CTRL 0x0d /* MMD Access Control Register */
+#define MII_MMD_DATA 0x0e /* MMD Access Data Register */
+#define MII_ESTATUS 0x0f /* Extended Status */
+#define MII_DCOUNTER 0x12 /* Disconnect counter */
+#define MII_FCSCOUNTER 0x13 /* False carrier counter */
+#define MII_NWAYTEST 0x14 /* N-way auto-neg test reg */
+#define MII_RERRCOUNTER 0x15 /* Receive error counter */
+#define MII_SREVISION 0x16 /* Silicon revision */
+#define MII_RESV1 0x17 /* Reserved... */
+#define MII_LBRERROR 0x18 /* Lpback, rx, bypass error */
+#define MII_PHYADDR 0x19 /* PHY address */
+#define MII_RESV2 0x1a /* Reserved... */
+#define MII_TPISTATUS 0x1b /* TPI status for 10mbps */
+#define MII_NCONFIG 0x1c /* Network interface config */
+
+/* Basic mode control register. */
+#define BMCR_RESV 0x003f /* Unused... */
+#define BMCR_SPEED1000 0x0040 /* MSB of Speed (1000) */
+#define BMCR_CTST 0x0080 /* Collision test */
+#define BMCR_FULLDPLX 0x0100 /* Full duplex */
+#define BMCR_ANRESTART 0x0200 /* Auto negotiation restart */
+#define BMCR_ISOLATE 0x0400 /* Isolate data paths from MII */
+#define BMCR_PDOWN 0x0800 /* Enable low power state */
+#define BMCR_ANENABLE 0x1000 /* Enable auto negotiation */
+#define BMCR_SPEED100 0x2000 /* Select 100Mbps */
+#define BMCR_LOOPBACK 0x4000 /* TXD loopback bits */
+#define BMCR_RESET 0x8000 /* Reset to default state */
+
+/* Basic mode status register. */
+#define BMSR_ERCAP 0x0001 /* Ext-reg capability */
+#define BMSR_JCD 0x0002 /* Jabber detected */
+#define BMSR_LSTATUS 0x0004 /* Link status */
+#define BMSR_ANEGCAPABLE 0x0008 /* Able to do auto-negotiation */
+#define BMSR_RFAULT 0x0010 /* Remote fault detected */
+#define BMSR_ANEGCOMPLETE 0x0020 /* Auto-negotiation complete */
+#define BMSR_RESV 0x00c0 /* Unused... */
+#define BMSR_ESTATEN 0x0100 /* Extended Status in R15 */
+#define BMSR_100HALF2 0x0200 /* Can do 100BASE-T2 HDX */
+#define BMSR_100FULL2 0x0400 /* Can do 100BASE-T2 FDX */
+#define BMSR_10HALF 0x0800 /* Can do 10mbps, half-duplex */
+#define BMSR_10FULL 0x1000 /* Can do 10mbps, full-duplex */
+#define BMSR_100HALF 0x2000 /* Can do 100mbps, half-duplex */
+#define BMSR_100FULL 0x4000 /* Can do 100mbps, full-duplex */
+#define BMSR_100BASE4 0x8000 /* Can do 100mbps, 4k packets */
+
+/* Advertisement control register. */
+#define ADVERTISE_SLCT 0x001f /* Selector bits */
+#define ADVERTISE_CSMA 0x0001 /* Only selector supported */
+#define ADVERTISE_10HALF 0x0020 /* Try for 10mbps half-duplex */
+#define ADVERTISE_1000XFULL 0x0020 /* Try for 1000BASE-X full-duplex */
+#define ADVERTISE_10FULL 0x0040 /* Try for 10mbps full-duplex */
+#define ADVERTISE_1000XHALF 0x0040 /* Try for 1000BASE-X half-duplex */
+#define ADVERTISE_100HALF 0x0080 /* Try for 100mbps half-duplex */
+#define ADVERTISE_1000XPAUSE 0x0080 /* Try for 1000BASE-X pause */
+#define ADVERTISE_100FULL 0x0100 /* Try for 100mbps full-duplex */
+#define ADVERTISE_1000XPSE_ASYM 0x0100 /* Try for 1000BASE-X asym pause */
+#define ADVERTISE_100BASE4 0x0200 /* Try for 100mbps 4k packets */
+#define ADVERTISE_PAUSE_CAP 0x0400 /* Try for pause */
+#define ADVERTISE_PAUSE_ASYM 0x0800 /* Try for asymetric pause */
+#define ADVERTISE_RESV 0x1000 /* Unused... */
+#define ADVERTISE_RFAULT 0x2000 /* Say we can detect faults */
+#define ADVERTISE_LPACK 0x4000 /* Ack link partners response */
+#define ADVERTISE_NPAGE 0x8000 /* Next page bit */
+
+#define ADVERTISE_FULL (ADVERTISE_100FULL | ADVERTISE_10FULL | \
+ ADVERTISE_CSMA)
+#define ADVERTISE_ALL (ADVERTISE_10HALF | ADVERTISE_10FULL | \
+ ADVERTISE_100HALF | ADVERTISE_100FULL)
+
+/* Link partner ability register. */
+#define LPA_SLCT 0x001f /* Same as advertise selector */
+#define LPA_10HALF 0x0020 /* Can do 10mbps half-duplex */
+#define LPA_1000XFULL 0x0020 /* Can do 1000BASE-X full-duplex */
+#define LPA_10FULL 0x0040 /* Can do 10mbps full-duplex */
+#define LPA_1000XHALF 0x0040 /* Can do 1000BASE-X half-duplex */
+#define LPA_100HALF 0x0080 /* Can do 100mbps half-duplex */
+#define LPA_1000XPAUSE 0x0080 /* Can do 1000BASE-X pause */
+#define LPA_100FULL 0x0100 /* Can do 100mbps full-duplex */
+#define LPA_1000XPAUSE_ASYM 0x0100 /* Can do 1000BASE-X pause asym*/
+#define LPA_100BASE4 0x0200 /* Can do 100mbps 4k packets */
+#define LPA_PAUSE_CAP 0x0400 /* Can pause */
+#define LPA_PAUSE_ASYM 0x0800 /* Can pause asymetrically */
+#define LPA_RESV 0x1000 /* Unused... */
+#define LPA_RFAULT 0x2000 /* Link partner faulted */
+#define LPA_LPACK 0x4000 /* Link partner acked us */
+#define LPA_NPAGE 0x8000 /* Next page bit */
+
+#define LPA_DUPLEX (LPA_10FULL | LPA_100FULL)
+#define LPA_100 (LPA_100FULL | LPA_100HALF | LPA_100BASE4)
+
+/* Expansion register for auto-negotiation. */
+#define EXPANSION_NWAY 0x0001 /* Can do N-way auto-nego */
+#define EXPANSION_LCWP 0x0002 /* Got new RX page code word */
+#define EXPANSION_ENABLENPAGE 0x0004 /* This enables npage words */
+#define EXPANSION_NPCAPABLE 0x0008 /* Link partner supports npage */
+#define EXPANSION_MFAULTS 0x0010 /* Multiple faults detected */
+#define EXPANSION_RESV 0xffe0 /* Unused... */
+
+#define ESTATUS_1000_TFULL 0x2000 /* Can do 1000BT Full */
+#define ESTATUS_1000_THALF 0x1000 /* Can do 1000BT Half */
+
+/* N-way test register. */
+#define NWAYTEST_RESV1 0x00ff /* Unused... */
+#define NWAYTEST_LOOPBACK 0x0100 /* Enable loopback for N-way */
+#define NWAYTEST_RESV2 0xfe00 /* Unused... */
+
+/* 1000BASE-T Control register */
+#define ADVERTISE_1000FULL 0x0200 /* Advertise 1000BASE-T full duplex */
+#define ADVERTISE_1000HALF 0x0100 /* Advertise 1000BASE-T half duplex */
+#define CTL1000_AS_MASTER 0x0800
+#define CTL1000_ENABLE_MASTER 0x1000
+
+/* 1000BASE-T Status register */
+#define LPA_1000LOCALRXOK 0x2000 /* Link partner local receiver status */
+#define LPA_1000REMRXOK 0x1000 /* Link partner remote receiver status */
+#define LPA_1000FULL 0x0800 /* Link partner 1000BASE-T full duplex */
+#define LPA_1000HALF 0x0400 /* Link partner 1000BASE-T half duplex */
+
+/* Flow control flags */
+#define FLOW_CTRL_TX 0x01
+#define FLOW_CTRL_RX 0x02
+
+/* MMD Access Control register fields */
+#define MII_MMD_CTRL_DEVAD_MASK 0x1f /* Mask MMD DEVAD*/
+#define MII_MMD_CTRL_ADDR 0x0000 /* Address */
+#define MII_MMD_CTRL_NOINCR 0x4000 /* no post increment */
+#define MII_MMD_CTRL_INCR_RDWT 0x8000 /* post increment on reads & writes */
+#define MII_MMD_CTRL_INCR_ON_WT 0xC000 /* post increment on writes only */
+
+/* This structure is used in all SIOCxMIIxxx ioctl calls */
+struct mii_ioctl_data {
+ __u16 phy_id;
+ __u16 reg_num;
+ __u16 val_in;
+ __u16 val_out;
+};
+
+#endif /* _UAPI__LINUX_MII_H__ */
diff --git a/include/linux/minix_fs.h b/include/uapi/linux/minix_fs.h
similarity index 100%
rename from include/linux/minix_fs.h
rename to include/uapi/linux/minix_fs.h
diff --git a/include/uapi/linux/mman.h b/include/uapi/linux/mman.h
new file mode 100644
index 0000000..ade4acd
--- /dev/null
+++ b/include/uapi/linux/mman.h
@@ -0,0 +1,13 @@
+#ifndef _UAPI_LINUX_MMAN_H
+#define _UAPI_LINUX_MMAN_H
+
+#include <asm/mman.h>
+
+#define MREMAP_MAYMOVE 1
+#define MREMAP_FIXED 2
+
+#define OVERCOMMIT_GUESS 0
+#define OVERCOMMIT_ALWAYS 1
+#define OVERCOMMIT_NEVER 2
+
+#endif /* _UAPI_LINUX_MMAN_H */
diff --git a/include/linux/mmtimer.h b/include/uapi/linux/mmtimer.h
similarity index 100%
rename from include/linux/mmtimer.h
rename to include/uapi/linux/mmtimer.h
diff --git a/include/linux/mqueue.h b/include/uapi/linux/mqueue.h
similarity index 100%
rename from include/linux/mqueue.h
rename to include/uapi/linux/mqueue.h
diff --git a/include/uapi/linux/mroute.h b/include/uapi/linux/mroute.h
new file mode 100644
index 0000000..1692999
--- /dev/null
+++ b/include/uapi/linux/mroute.h
@@ -0,0 +1,143 @@
+#ifndef _UAPI__LINUX_MROUTE_H
+#define _UAPI__LINUX_MROUTE_H
+
+#include <linux/sockios.h>
+#include <linux/types.h>
+
+/*
+ * Based on the MROUTING 3.5 defines primarily to keep
+ * source compatibility with BSD.
+ *
+ * See the mrouted code for the original history.
+ *
+ * Protocol Independent Multicast (PIM) data structures included
+ * Carlos Picoto (cap@di.fc.ul.pt)
+ *
+ */
+
+#define MRT_BASE 200
+#define MRT_INIT (MRT_BASE) /* Activate the kernel mroute code */
+#define MRT_DONE (MRT_BASE+1) /* Shutdown the kernel mroute */
+#define MRT_ADD_VIF (MRT_BASE+2) /* Add a virtual interface */
+#define MRT_DEL_VIF (MRT_BASE+3) /* Delete a virtual interface */
+#define MRT_ADD_MFC (MRT_BASE+4) /* Add a multicast forwarding entry */
+#define MRT_DEL_MFC (MRT_BASE+5) /* Delete a multicast forwarding entry */
+#define MRT_VERSION (MRT_BASE+6) /* Get the kernel multicast version */
+#define MRT_ASSERT (MRT_BASE+7) /* Activate PIM assert mode */
+#define MRT_PIM (MRT_BASE+8) /* enable PIM code */
+#define MRT_TABLE (MRT_BASE+9) /* Specify mroute table ID */
+
+#define SIOCGETVIFCNT SIOCPROTOPRIVATE /* IP protocol privates */
+#define SIOCGETSGCNT (SIOCPROTOPRIVATE+1)
+#define SIOCGETRPF (SIOCPROTOPRIVATE+2)
+
+#define MAXVIFS 32
+typedef unsigned long vifbitmap_t; /* User mode code depends on this lot */
+typedef unsigned short vifi_t;
+#define ALL_VIFS ((vifi_t)(-1))
+
+/*
+ * Same idea as select
+ */
+
+#define VIFM_SET(n,m) ((m)|=(1<<(n)))
+#define VIFM_CLR(n,m) ((m)&=~(1<<(n)))
+#define VIFM_ISSET(n,m) ((m)&(1<<(n)))
+#define VIFM_CLRALL(m) ((m)=0)
+#define VIFM_COPY(mfrom,mto) ((mto)=(mfrom))
+#define VIFM_SAME(m1,m2) ((m1)==(m2))
+
+/*
+ * Passed by mrouted for an MRT_ADD_VIF - again we use the
+ * mrouted 3.6 structures for compatibility
+ */
+
+struct vifctl {
+ vifi_t vifc_vifi; /* Index of VIF */
+ unsigned char vifc_flags; /* VIFF_ flags */
+ unsigned char vifc_threshold; /* ttl limit */
+ unsigned int vifc_rate_limit; /* Rate limiter values (NI) */
+ union {
+ struct in_addr vifc_lcl_addr; /* Local interface address */
+ int vifc_lcl_ifindex; /* Local interface index */
+ };
+ struct in_addr vifc_rmt_addr; /* IPIP tunnel addr */
+};
+
+#define VIFF_TUNNEL 0x1 /* IPIP tunnel */
+#define VIFF_SRCRT 0x2 /* NI */
+#define VIFF_REGISTER 0x4 /* register vif */
+#define VIFF_USE_IFINDEX 0x8 /* use vifc_lcl_ifindex instead of
+ vifc_lcl_addr to find an interface */
+
+/*
+ * Cache manipulation structures for mrouted and PIMd
+ */
+
+struct mfcctl {
+ struct in_addr mfcc_origin; /* Origin of mcast */
+ struct in_addr mfcc_mcastgrp; /* Group in question */
+ vifi_t mfcc_parent; /* Where it arrived */
+ unsigned char mfcc_ttls[MAXVIFS]; /* Where it is going */
+ unsigned int mfcc_pkt_cnt; /* pkt count for src-grp */
+ unsigned int mfcc_byte_cnt;
+ unsigned int mfcc_wrong_if;
+ int mfcc_expire;
+};
+
+/*
+ * Group count retrieval for mrouted
+ */
+
+struct sioc_sg_req {
+ struct in_addr src;
+ struct in_addr grp;
+ unsigned long pktcnt;
+ unsigned long bytecnt;
+ unsigned long wrong_if;
+};
+
+/*
+ * To get vif packet counts
+ */
+
+struct sioc_vif_req {
+ vifi_t vifi; /* Which iface */
+ unsigned long icount; /* In packets */
+ unsigned long ocount; /* Out packets */
+ unsigned long ibytes; /* In bytes */
+ unsigned long obytes; /* Out bytes */
+};
+
+/*
+ * This is the format the mroute daemon expects to see IGMP control
+ * data. Magically happens to be like an IP packet as per the original
+ */
+
+struct igmpmsg {
+ __u32 unused1,unused2;
+ unsigned char im_msgtype; /* What is this */
+ unsigned char im_mbz; /* Must be zero */
+ unsigned char im_vif; /* Interface (this ought to be a vifi_t!) */
+ unsigned char unused3;
+ struct in_addr im_src,im_dst;
+};
+
+/*
+ * That's all usermode folks
+ */
+
+
+
+#define MFC_ASSERT_THRESH (3*HZ) /* Maximal freq. of asserts */
+
+/*
+ * Pseudo messages used by mrouted
+ */
+
+#define IGMPMSG_NOCACHE 1 /* Kern cache fill request to mrouted */
+#define IGMPMSG_WRONGVIF 2 /* For PIM assert processing (unused) */
+#define IGMPMSG_WHOLEPKT 3 /* For PIM Register processing */
+
+
+#endif /* _UAPI__LINUX_MROUTE_H */
diff --git a/include/uapi/linux/mroute6.h b/include/uapi/linux/mroute6.h
new file mode 100644
index 0000000..3e89b5e
--- /dev/null
+++ b/include/uapi/linux/mroute6.h
@@ -0,0 +1,137 @@
+#ifndef _UAPI__LINUX_MROUTE6_H
+#define _UAPI__LINUX_MROUTE6_H
+
+#include <linux/types.h>
+#include <linux/sockios.h>
+
+/*
+ * Based on the MROUTING 3.5 defines primarily to keep
+ * source compatibility with BSD.
+ *
+ * See the pim6sd code for the original history.
+ *
+ * Protocol Independent Multicast (PIM) data structures included
+ * Carlos Picoto (cap@di.fc.ul.pt)
+ *
+ */
+
+#define MRT6_BASE 200
+#define MRT6_INIT (MRT6_BASE) /* Activate the kernel mroute code */
+#define MRT6_DONE (MRT6_BASE+1) /* Shutdown the kernel mroute */
+#define MRT6_ADD_MIF (MRT6_BASE+2) /* Add a virtual interface */
+#define MRT6_DEL_MIF (MRT6_BASE+3) /* Delete a virtual interface */
+#define MRT6_ADD_MFC (MRT6_BASE+4) /* Add a multicast forwarding entry */
+#define MRT6_DEL_MFC (MRT6_BASE+5) /* Delete a multicast forwarding entry */
+#define MRT6_VERSION (MRT6_BASE+6) /* Get the kernel multicast version */
+#define MRT6_ASSERT (MRT6_BASE+7) /* Activate PIM assert mode */
+#define MRT6_PIM (MRT6_BASE+8) /* enable PIM code */
+#define MRT6_TABLE (MRT6_BASE+9) /* Specify mroute table ID */
+
+#define SIOCGETMIFCNT_IN6 SIOCPROTOPRIVATE /* IP protocol privates */
+#define SIOCGETSGCNT_IN6 (SIOCPROTOPRIVATE+1)
+#define SIOCGETRPF (SIOCPROTOPRIVATE+2)
+
+#define MAXMIFS 32
+typedef unsigned long mifbitmap_t; /* User mode code depends on this lot */
+typedef unsigned short mifi_t;
+#define ALL_MIFS ((mifi_t)(-1))
+
+#ifndef IF_SETSIZE
+#define IF_SETSIZE 256
+#endif
+
+typedef __u32 if_mask;
+#define NIFBITS (sizeof(if_mask) * 8) /* bits per mask */
+
+#if !defined(__KERNEL__)
+#if !defined(DIV_ROUND_UP)
+#define DIV_ROUND_UP(x,y) (((x) + ((y) - 1)) / (y))
+#endif
+#endif
+
+typedef struct if_set {
+ if_mask ifs_bits[DIV_ROUND_UP(IF_SETSIZE, NIFBITS)];
+} if_set;
+
+#define IF_SET(n, p) ((p)->ifs_bits[(n)/NIFBITS] |= (1 << ((n) % NIFBITS)))
+#define IF_CLR(n, p) ((p)->ifs_bits[(n)/NIFBITS] &= ~(1 << ((n) % NIFBITS)))
+#define IF_ISSET(n, p) ((p)->ifs_bits[(n)/NIFBITS] & (1 << ((n) % NIFBITS)))
+#define IF_COPY(f, t) bcopy(f, t, sizeof(*(f)))
+#define IF_ZERO(p) bzero(p, sizeof(*(p)))
+
+/*
+ * Passed by mrouted for an MRT_ADD_MIF - again we use the
+ * mrouted 3.6 structures for compatibility
+ */
+
+struct mif6ctl {
+ mifi_t mif6c_mifi; /* Index of MIF */
+ unsigned char mif6c_flags; /* MIFF_ flags */
+ unsigned char vifc_threshold; /* ttl limit */
+ __u16 mif6c_pifi; /* the index of the physical IF */
+ unsigned int vifc_rate_limit; /* Rate limiter values (NI) */
+};
+
+#define MIFF_REGISTER 0x1 /* register vif */
+
+/*
+ * Cache manipulation structures for mrouted and PIMd
+ */
+
+struct mf6cctl {
+ struct sockaddr_in6 mf6cc_origin; /* Origin of mcast */
+ struct sockaddr_in6 mf6cc_mcastgrp; /* Group in question */
+ mifi_t mf6cc_parent; /* Where it arrived */
+ struct if_set mf6cc_ifset; /* Where it is going */
+};
+
+/*
+ * Group count retrieval for pim6sd
+ */
+
+struct sioc_sg_req6 {
+ struct sockaddr_in6 src;
+ struct sockaddr_in6 grp;
+ unsigned long pktcnt;
+ unsigned long bytecnt;
+ unsigned long wrong_if;
+};
+
+/*
+ * To get vif packet counts
+ */
+
+struct sioc_mif_req6 {
+ mifi_t mifi; /* Which iface */
+ unsigned long icount; /* In packets */
+ unsigned long ocount; /* Out packets */
+ unsigned long ibytes; /* In bytes */
+ unsigned long obytes; /* Out bytes */
+};
+
+/*
+ * That's all usermode folks
+ */
+
+
+
+/*
+ * Structure used to communicate from kernel to multicast router.
+ * We'll overlay the structure onto an MLD header (not an IPv6 heder like igmpmsg{}
+ * used for IPv4 implementation). This is because this structure will be passed via an
+ * IPv6 raw socket, on which an application will only receiver the payload i.e the data after
+ * the IPv6 header and all the extension headers. (See section 3 of RFC 3542)
+ */
+
+struct mrt6msg {
+#define MRT6MSG_NOCACHE 1
+#define MRT6MSG_WRONGMIF 2
+#define MRT6MSG_WHOLEPKT 3 /* used for use level encap */
+ __u8 im6_mbz; /* must be zero */
+ __u8 im6_msgtype; /* what type of message */
+ __u16 im6_mif; /* mif rec'd on */
+ __u32 im6_pad; /* padding for 64 bit arch */
+ struct in6_addr im6_src, im6_dst;
+};
+
+#endif /* _UAPI__LINUX_MROUTE6_H */
diff --git a/include/uapi/linux/msdos_fs.h b/include/uapi/linux/msdos_fs.h
new file mode 100644
index 0000000..996719f
--- /dev/null
+++ b/include/uapi/linux/msdos_fs.h
@@ -0,0 +1,167 @@
+#ifndef _UAPI_LINUX_MSDOS_FS_H
+#define _UAPI_LINUX_MSDOS_FS_H
+
+#include <linux/types.h>
+#include <linux/magic.h>
+#include <asm/byteorder.h>
+
+/*
+ * The MS-DOS filesystem constants/structures
+ */
+
+#define SECTOR_SIZE 512 /* sector size (bytes) */
+#define SECTOR_BITS 9 /* log2(SECTOR_SIZE) */
+#define MSDOS_DPB (MSDOS_DPS) /* dir entries per block */
+#define MSDOS_DPB_BITS 4 /* log2(MSDOS_DPB) */
+#define MSDOS_DPS (SECTOR_SIZE / sizeof(struct msdos_dir_entry))
+#define MSDOS_DPS_BITS 4 /* log2(MSDOS_DPS) */
+#define MSDOS_LONGNAME 256 /* maximum name length */
+#define CF_LE_W(v) le16_to_cpu(v)
+#define CF_LE_L(v) le32_to_cpu(v)
+#define CT_LE_W(v) cpu_to_le16(v)
+#define CT_LE_L(v) cpu_to_le32(v)
+
+#define MSDOS_ROOT_INO 1 /* The root inode number */
+#define MSDOS_FSINFO_INO 2 /* Used for managing the FSINFO block */
+
+#define MSDOS_DIR_BITS 5 /* log2(sizeof(struct msdos_dir_entry)) */
+
+/* directory limit */
+#define FAT_MAX_DIR_ENTRIES (65536)
+#define FAT_MAX_DIR_SIZE (FAT_MAX_DIR_ENTRIES << MSDOS_DIR_BITS)
+
+#define ATTR_NONE 0 /* no attribute bits */
+#define ATTR_RO 1 /* read-only */
+#define ATTR_HIDDEN 2 /* hidden */
+#define ATTR_SYS 4 /* system */
+#define ATTR_VOLUME 8 /* volume label */
+#define ATTR_DIR 16 /* directory */
+#define ATTR_ARCH 32 /* archived */
+
+/* attribute bits that are copied "as is" */
+#define ATTR_UNUSED (ATTR_VOLUME | ATTR_ARCH | ATTR_SYS | ATTR_HIDDEN)
+/* bits that are used by the Windows 95/Windows NT extended FAT */
+#define ATTR_EXT (ATTR_RO | ATTR_HIDDEN | ATTR_SYS | ATTR_VOLUME)
+
+#define CASE_LOWER_BASE 8 /* base is lower case */
+#define CASE_LOWER_EXT 16 /* extension is lower case */
+
+#define DELETED_FLAG 0xe5 /* marks file as deleted when in name[0] */
+#define IS_FREE(n) (!*(n) || *(n) == DELETED_FLAG)
+
+#define FAT_LFN_LEN 255 /* maximum long name length */
+#define MSDOS_NAME 11 /* maximum name length */
+#define MSDOS_SLOTS 21 /* max # of slots for short and long names */
+#define MSDOS_DOT ". " /* ".", padded to MSDOS_NAME chars */
+#define MSDOS_DOTDOT ".. " /* "..", padded to MSDOS_NAME chars */
+
+#define FAT_FIRST_ENT(s, x) ((MSDOS_SB(s)->fat_bits == 32 ? 0x0FFFFF00 : \
+ MSDOS_SB(s)->fat_bits == 16 ? 0xFF00 : 0xF00) | (x))
+
+/* start of data cluster's entry (number of reserved clusters) */
+#define FAT_START_ENT 2
+
+/* maximum number of clusters */
+#define MAX_FAT12 0xFF4
+#define MAX_FAT16 0xFFF4
+#define MAX_FAT32 0x0FFFFFF6
+#define MAX_FAT(s) (MSDOS_SB(s)->fat_bits == 32 ? MAX_FAT32 : \
+ MSDOS_SB(s)->fat_bits == 16 ? MAX_FAT16 : MAX_FAT12)
+
+/* bad cluster mark */
+#define BAD_FAT12 0xFF7
+#define BAD_FAT16 0xFFF7
+#define BAD_FAT32 0x0FFFFFF7
+
+/* standard EOF */
+#define EOF_FAT12 0xFFF
+#define EOF_FAT16 0xFFFF
+#define EOF_FAT32 0x0FFFFFFF
+
+#define FAT_ENT_FREE (0)
+#define FAT_ENT_BAD (BAD_FAT32)
+#define FAT_ENT_EOF (EOF_FAT32)
+
+#define FAT_FSINFO_SIG1 0x41615252
+#define FAT_FSINFO_SIG2 0x61417272
+#define IS_FSINFO(x) (le32_to_cpu((x)->signature1) == FAT_FSINFO_SIG1 \
+ && le32_to_cpu((x)->signature2) == FAT_FSINFO_SIG2)
+
+struct __fat_dirent {
+ long d_ino;
+ __kernel_off_t d_off;
+ unsigned short d_reclen;
+ char d_name[256]; /* We must not include limits.h! */
+};
+
+/*
+ * ioctl commands
+ */
+#define VFAT_IOCTL_READDIR_BOTH _IOR('r', 1, struct __fat_dirent[2])
+#define VFAT_IOCTL_READDIR_SHORT _IOR('r', 2, struct __fat_dirent[2])
+/* <linux/videotext.h> has used 0x72 ('r') in collision, so skip a few */
+#define FAT_IOCTL_GET_ATTRIBUTES _IOR('r', 0x10, __u32)
+#define FAT_IOCTL_SET_ATTRIBUTES _IOW('r', 0x11, __u32)
+
+struct fat_boot_sector {
+ __u8 ignored[3]; /* Boot strap short or near jump */
+ __u8 system_id[8]; /* Name - can be used to special case
+ partition manager volumes */
+ __u8 sector_size[2]; /* bytes per logical sector */
+ __u8 sec_per_clus; /* sectors/cluster */
+ __le16 reserved; /* reserved sectors */
+ __u8 fats; /* number of FATs */
+ __u8 dir_entries[2]; /* root directory entries */
+ __u8 sectors[2]; /* number of sectors */
+ __u8 media; /* media code */
+ __le16 fat_length; /* sectors/FAT */
+ __le16 secs_track; /* sectors per track */
+ __le16 heads; /* number of heads */
+ __le32 hidden; /* hidden sectors (unused) */
+ __le32 total_sect; /* number of sectors (if sectors == 0) */
+
+ /* The following fields are only used by FAT32 */
+ __le32 fat32_length; /* sectors/FAT */
+ __le16 flags; /* bit 8: fat mirroring, low 4: active fat */
+ __u8 version[2]; /* major, minor filesystem version */
+ __le32 root_cluster; /* first cluster in root directory */
+ __le16 info_sector; /* filesystem info sector */
+ __le16 backup_boot; /* backup boot sector */
+ __le16 reserved2[6]; /* Unused */
+};
+
+struct fat_boot_fsinfo {
+ __le32 signature1; /* 0x41615252L */
+ __le32 reserved1[120]; /* Nothing as far as I can tell */
+ __le32 signature2; /* 0x61417272L */
+ __le32 free_clusters; /* Free cluster count. -1 if unknown */
+ __le32 next_cluster; /* Most recently allocated cluster */
+ __le32 reserved2[4];
+};
+
+struct msdos_dir_entry {
+ __u8 name[MSDOS_NAME];/* name and extension */
+ __u8 attr; /* attribute bits */
+ __u8 lcase; /* Case for base and extension */
+ __u8 ctime_cs; /* Creation time, centiseconds (0-199) */
+ __le16 ctime; /* Creation time */
+ __le16 cdate; /* Creation date */
+ __le16 adate; /* Last access date */
+ __le16 starthi; /* High 16 bits of cluster in FAT32 */
+ __le16 time,date,start;/* time, date and first cluster */
+ __le32 size; /* file size (in bytes) */
+};
+
+/* Up to 13 characters of the name */
+struct msdos_dir_slot {
+ __u8 id; /* sequence number for slot */
+ __u8 name0_4[10]; /* first 5 characters in name */
+ __u8 attr; /* attribute byte */
+ __u8 reserved; /* always 0 */
+ __u8 alias_checksum; /* checksum for 8.3 alias */
+ __u8 name5_10[12]; /* 6 more characters in name */
+ __le16 start; /* starting cluster number, 0 in long slots */
+ __u8 name11_12[4]; /* last 2 characters in name */
+};
+
+#endif /* _UAPI_LINUX_MSDOS_FS_H */
diff --git a/include/uapi/linux/msg.h b/include/uapi/linux/msg.h
new file mode 100644
index 0000000..78dbd2f
--- /dev/null
+++ b/include/uapi/linux/msg.h
@@ -0,0 +1,75 @@
+#ifndef _UAPI_LINUX_MSG_H
+#define _UAPI_LINUX_MSG_H
+
+#include <linux/ipc.h>
+
+/* ipcs ctl commands */
+#define MSG_STAT 11
+#define MSG_INFO 12
+
+/* msgrcv options */
+#define MSG_NOERROR 010000 /* no error if message is too big */
+#define MSG_EXCEPT 020000 /* recv any msg except of specified type.*/
+
+/* Obsolete, used only for backwards compatibility and libc5 compiles */
+struct msqid_ds {
+ struct ipc_perm msg_perm;
+ struct msg *msg_first; /* first message on queue,unused */
+ struct msg *msg_last; /* last message in queue,unused */
+ __kernel_time_t msg_stime; /* last msgsnd time */
+ __kernel_time_t msg_rtime; /* last msgrcv time */
+ __kernel_time_t msg_ctime; /* last change time */
+ unsigned long msg_lcbytes; /* Reuse junk fields for 32 bit */
+ unsigned long msg_lqbytes; /* ditto */
+ unsigned short msg_cbytes; /* current number of bytes on queue */
+ unsigned short msg_qnum; /* number of messages in queue */
+ unsigned short msg_qbytes; /* max number of bytes on queue */
+ __kernel_ipc_pid_t msg_lspid; /* pid of last msgsnd */
+ __kernel_ipc_pid_t msg_lrpid; /* last receive pid */
+};
+
+/* Include the definition of msqid64_ds */
+#include <asm/msgbuf.h>
+
+/* message buffer for msgsnd and msgrcv calls */
+struct msgbuf {
+ long mtype; /* type of message */
+ char mtext[1]; /* message text */
+};
+
+/* buffer for msgctl calls IPC_INFO, MSG_INFO */
+struct msginfo {
+ int msgpool;
+ int msgmap;
+ int msgmax;
+ int msgmnb;
+ int msgmni;
+ int msgssz;
+ int msgtql;
+ unsigned short msgseg;
+};
+
+/*
+ * Scaling factor to compute msgmni:
+ * the memory dedicated to msg queues (msgmni * msgmnb) should occupy
+ * at most 1/MSG_MEM_SCALE of the lowmem (see the formula in ipc/msg.c):
+ * up to 8MB : msgmni = 16 (MSGMNI)
+ * 4 GB : msgmni = 8K
+ * more than 16 GB : msgmni = 32K (IPCMNI)
+ */
+#define MSG_MEM_SCALE 32
+
+#define MSGMNI 16 /* <= IPCMNI */ /* max # of msg queue identifiers */
+#define MSGMAX 8192 /* <= INT_MAX */ /* max size of message (bytes) */
+#define MSGMNB 16384 /* <= INT_MAX */ /* default max size of a message queue */
+
+/* unused */
+#define MSGPOOL (MSGMNI * MSGMNB / 1024) /* size in kbytes of message pool */
+#define MSGTQL MSGMNB /* number of system message headers */
+#define MSGMAP MSGMNB /* number of entries in message map */
+#define MSGSSZ 16 /* message segment size */
+#define __MSGSEG ((MSGPOOL * 1024) / MSGSSZ) /* max no. of segments */
+#define MSGSEG (__MSGSEG <= 0xffff ? __MSGSEG : 0xffff)
+
+
+#endif /* _UAPI_LINUX_MSG_H */
diff --git a/include/linux/mtio.h b/include/uapi/linux/mtio.h
similarity index 100%
rename from include/linux/mtio.h
rename to include/uapi/linux/mtio.h
diff --git a/include/uapi/linux/n_r3964.h b/include/uapi/linux/n_r3964.h
new file mode 100644
index 0000000..81337cb
--- /dev/null
+++ b/include/uapi/linux/n_r3964.h
@@ -0,0 +1,98 @@
+/* r3964 linediscipline for linux
+ *
+ * -----------------------------------------------------------
+ * Copyright by
+ * Philips Automation Projects
+ * Kassel (Germany)
+ * -----------------------------------------------------------
+ * This software may be used and distributed according to the terms of
+ * the GNU General Public License, incorporated herein by reference.
+ *
+ * Author:
+ * L. Haag
+ *
+ * $Log: r3964.h,v $
+ * Revision 1.4 2005/12/21 19:54:24 Kurt Huwig <kurt huwig de>
+ * Fixed HZ usage on 2.6 kernels
+ * Removed unnecessary include
+ *
+ * Revision 1.3 2001/03/18 13:02:24 dwmw2
+ * Fix timer usage, use spinlocks properly.
+ *
+ * Revision 1.2 2001/03/18 12:53:15 dwmw2
+ * Merge changes in 2.4.2
+ *
+ * Revision 1.1.1.1 1998/10/13 16:43:14 dwmw2
+ * This'll screw the version control
+ *
+ * Revision 1.6 1998/09/30 00:40:38 dwmw2
+ * Updated to use kernel's N_R3964 if available
+ *
+ * Revision 1.4 1998/04/02 20:29:44 lhaag
+ * select, blocking, ...
+ *
+ * Revision 1.3 1998/02/12 18:58:43 root
+ * fixed some memory leaks
+ * calculation of checksum characters
+ *
+ * Revision 1.2 1998/02/07 13:03:17 root
+ * ioctl read_telegram
+ *
+ * Revision 1.1 1998/02/06 19:19:43 root
+ * Initial revision
+ *
+ *
+ */
+
+#ifndef _UAPI__LINUX_N_R3964_H__
+#define _UAPI__LINUX_N_R3964_H__
+
+/* line disciplines for r3964 protocol */
+
+
+/*
+ * Ioctl-commands
+ */
+
+#define R3964_ENABLE_SIGNALS 0x5301
+#define R3964_SETPRIORITY 0x5302
+#define R3964_USE_BCC 0x5303
+#define R3964_READ_TELEGRAM 0x5304
+
+/* Options for R3964_SETPRIORITY */
+#define R3964_MASTER 0
+#define R3964_SLAVE 1
+
+/* Options for R3964_ENABLE_SIGNALS */
+#define R3964_SIG_ACK 0x0001
+#define R3964_SIG_DATA 0x0002
+#define R3964_SIG_ALL 0x000f
+#define R3964_SIG_NONE 0x0000
+#define R3964_USE_SIGIO 0x1000
+
+/*
+ * r3964 operation states:
+ */
+
+/* types for msg_id: */
+enum {R3964_MSG_ACK=1, R3964_MSG_DATA };
+
+#define R3964_MAX_MSG_COUNT 32
+
+/* error codes for client messages */
+#define R3964_OK 0 /* no error. */
+#define R3964_TX_FAIL -1 /* transmission error, block NOT sent */
+#define R3964_OVERFLOW -2 /* msg queue overflow */
+
+/* the client gets this struct when calling read(fd,...): */
+struct r3964_client_message {
+ int msg_id;
+ int arg;
+ int error_code;
+};
+
+#define R3964_MTU 256
+
+
+
+#endif /* _UAPI__LINUX_N_R3964_H__ */
diff --git a/include/uapi/linux/nbd.h b/include/uapi/linux/nbd.h
new file mode 100644
index 0000000..dfb5144
--- /dev/null
+++ b/include/uapi/linux/nbd.h
@@ -0,0 +1,77 @@
+/*
+ * 1999 Copyright (C) Pavel Machek, pavel@ucw.cz. This code is GPL.
+ * 1999/11/04 Copyright (C) 1999 VMware, Inc. (Regis "HPReg" Duchesne)
+ * Made nbd_end_request() use the io_request_lock
+ * 2001 Copyright (C) Steven Whitehouse
+ * New nbd_end_request() for compatibility with new linux block
+ * layer code.
+ * 2003/06/24 Louis D. Langholtz <ldl@aros.net>
+ * Removed unneeded blksize_bits field from nbd_device struct.
+ * Cleanup PARANOIA usage & code.
+ * 2004/02/19 Paul Clements
+ * Removed PARANOIA, plus various cleanup and comments
+ */
+
+#ifndef _UAPILINUX_NBD_H
+#define _UAPILINUX_NBD_H
+
+#include <linux/types.h>
+
+#define NBD_SET_SOCK _IO( 0xab, 0 )
+#define NBD_SET_BLKSIZE _IO( 0xab, 1 )
+#define NBD_SET_SIZE _IO( 0xab, 2 )
+#define NBD_DO_IT _IO( 0xab, 3 )
+#define NBD_CLEAR_SOCK _IO( 0xab, 4 )
+#define NBD_CLEAR_QUE _IO( 0xab, 5 )
+#define NBD_PRINT_DEBUG _IO( 0xab, 6 )
+#define NBD_SET_SIZE_BLOCKS _IO( 0xab, 7 )
+#define NBD_DISCONNECT _IO( 0xab, 8 )
+#define NBD_SET_TIMEOUT _IO( 0xab, 9 )
+#define NBD_SET_FLAGS _IO( 0xab, 10)
+
+enum {
+ NBD_CMD_READ = 0,
+ NBD_CMD_WRITE = 1,
+ NBD_CMD_DISC = 2,
+ /* there is a gap here to match userspace */
+ NBD_CMD_TRIM = 4
+};
+
+/* values for flags field */
+#define NBD_FLAG_HAS_FLAGS (1 << 0) /* nbd-server supports flags */
+#define NBD_FLAG_READ_ONLY (1 << 1) /* device is read-only */
+/* there is a gap here to match userspace */
+#define NBD_FLAG_SEND_TRIM (1 << 5) /* send trim/discard */
+
+#define nbd_cmd(req) ((req)->cmd[0])
+
+/* userspace doesn't need the nbd_device structure */
+
+/* These are sent over the network in the request/reply magic fields */
+
+#define NBD_REQUEST_MAGIC 0x25609513
+#define NBD_REPLY_MAGIC 0x67446698
+/* Do *not* use magics: 0x12560953 0x96744668. */
+
+/*
+ * This is the packet used for communication between client and
+ * server. All data are in network byte order.
+ */
+struct nbd_request {
+ __be32 magic;
+ __be32 type; /* == READ || == WRITE */
+ char handle[8];
+ __be64 from;
+ __be32 len;
+} __attribute__((packed));
+
+/*
+ * This is the reply packet that nbd-server sends back to the client after
+ * it has completed an I/O request (or an error occurs).
+ */
+struct nbd_reply {
+ __be32 magic;
+ __be32 error; /* 0 = ok, else error */
+ char handle[8]; /* handle you got from request */
+};
+#endif /* _UAPILINUX_NBD_H */
diff --git a/include/linux/ncp.h b/include/uapi/linux/ncp.h
similarity index 100%
rename from include/linux/ncp.h
rename to include/uapi/linux/ncp.h
diff --git a/include/linux/ncp_fs.h b/include/uapi/linux/ncp_fs.h
similarity index 100%
rename from include/linux/ncp_fs.h
rename to include/uapi/linux/ncp_fs.h
diff --git a/include/linux/ncp_mount.h b/include/uapi/linux/ncp_mount.h
similarity index 100%
rename from include/linux/ncp_mount.h
rename to include/uapi/linux/ncp_mount.h
diff --git a/include/linux/ncp_no.h b/include/uapi/linux/ncp_no.h
similarity index 100%
rename from include/linux/ncp_no.h
rename to include/uapi/linux/ncp_no.h
diff --git a/include/linux/neighbour.h b/include/uapi/linux/neighbour.h
similarity index 100%
rename from include/linux/neighbour.h
rename to include/uapi/linux/neighbour.h
diff --git a/include/uapi/linux/net.h b/include/uapi/linux/net.h
new file mode 100644
index 0000000..9457239
--- /dev/null
+++ b/include/uapi/linux/net.h
@@ -0,0 +1,57 @@
+/*
+ * NET An implementation of the SOCKET network access protocol.
+ * This is the master header file for the Linux NET layer,
+ * or, in plain English: the networking handling part of the
+ * kernel.
+ *
+ * Version: @(#)net.h 1.0.3 05/25/93
+ *
+ * Authors: Orest Zborowski, <obz@Kodak.COM>
+ * Ross Biro
+ * Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _UAPI_LINUX_NET_H
+#define _UAPI_LINUX_NET_H
+
+#include <linux/socket.h>
+#include <asm/socket.h>
+
+#define NPROTO AF_MAX
+
+#define SYS_SOCKET 1 /* sys_socket(2) */
+#define SYS_BIND 2 /* sys_bind(2) */
+#define SYS_CONNECT 3 /* sys_connect(2) */
+#define SYS_LISTEN 4 /* sys_listen(2) */
+#define SYS_ACCEPT 5 /* sys_accept(2) */
+#define SYS_GETSOCKNAME 6 /* sys_getsockname(2) */
+#define SYS_GETPEERNAME 7 /* sys_getpeername(2) */
+#define SYS_SOCKETPAIR 8 /* sys_socketpair(2) */
+#define SYS_SEND 9 /* sys_send(2) */
+#define SYS_RECV 10 /* sys_recv(2) */
+#define SYS_SENDTO 11 /* sys_sendto(2) */
+#define SYS_RECVFROM 12 /* sys_recvfrom(2) */
+#define SYS_SHUTDOWN 13 /* sys_shutdown(2) */
+#define SYS_SETSOCKOPT 14 /* sys_setsockopt(2) */
+#define SYS_GETSOCKOPT 15 /* sys_getsockopt(2) */
+#define SYS_SENDMSG 16 /* sys_sendmsg(2) */
+#define SYS_RECVMSG 17 /* sys_recvmsg(2) */
+#define SYS_ACCEPT4 18 /* sys_accept4(2) */
+#define SYS_RECVMMSG 19 /* sys_recvmmsg(2) */
+#define SYS_SENDMMSG 20 /* sys_sendmmsg(2) */
+
+typedef enum {
+ SS_FREE = 0, /* not allocated */
+ SS_UNCONNECTED, /* unconnected to any socket */
+ SS_CONNECTING, /* in process of connecting */
+ SS_CONNECTED, /* connected to socket */
+ SS_DISCONNECTING /* in process of disconnecting */
+} socket_state;
+
+#define __SO_ACCEPTCON (1 << 16) /* performed a listen */
+
+#endif /* _UAPI_LINUX_NET_H */
diff --git a/include/linux/net_dropmon.h b/include/uapi/linux/net_dropmon.h
similarity index 100%
rename from include/linux/net_dropmon.h
rename to include/uapi/linux/net_dropmon.h
diff --git a/include/linux/net_tstamp.h b/include/uapi/linux/net_tstamp.h
similarity index 100%
rename from include/linux/net_tstamp.h
rename to include/uapi/linux/net_tstamp.h
diff --git a/include/uapi/linux/netdevice.h b/include/uapi/linux/netdevice.h
new file mode 100644
index 0000000..6b9500b
--- /dev/null
+++ b/include/uapi/linux/netdevice.h
@@ -0,0 +1,53 @@
+/*
+ * INET An implementation of the TCP/IP protocol suite for the LINUX
+ * operating system. INET is implemented using the BSD Socket
+ * interface as the means of communication with the user level.
+ *
+ * Definitions for the Interfaces handler.
+ *
+ * Version: @(#)dev.h 1.0.10 08/12/93
+ *
+ * Authors: Ross Biro
+ * Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ * Corey Minyard <wf-rch!minyard@relay.EU.net>
+ * Donald J. Becker, <becker@cesdis.gsfc.nasa.gov>
+ * Alan Cox, <alan@lxorguk.ukuu.org.uk>
+ * Bjorn Ekwall. <bj0rn@blox.se>
+ * Pekka Riikonen <priikone@poseidon.pspt.fi>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * Moved to /usr/include/linux for NET3
+ */
+#ifndef _UAPI_LINUX_NETDEVICE_H
+#define _UAPI_LINUX_NETDEVICE_H
+
+#include <linux/if.h>
+#include <linux/if_ether.h>
+#include <linux/if_packet.h>
+#include <linux/if_link.h>
+
+
+#define MAX_ADDR_LEN 32 /* Largest hardware address length */
+
+/* Initial net device group. All devices belong to group 0 by default. */
+#define INIT_NETDEV_GROUP 0
+
+
+
+/* Media selection options. */
+enum {
+ IF_PORT_UNKNOWN = 0,
+ IF_PORT_10BASE2,
+ IF_PORT_10BASET,
+ IF_PORT_AUI,
+ IF_PORT_100BASET,
+ IF_PORT_100BASETX,
+ IF_PORT_100BASEFX
+};
+
+
+#endif /* _UAPI_LINUX_NETDEVICE_H */
diff --git a/include/uapi/linux/netfilter.h b/include/uapi/linux/netfilter.h
new file mode 100644
index 0000000..f7dc0eb
--- /dev/null
+++ b/include/uapi/linux/netfilter.h
@@ -0,0 +1,72 @@
+#ifndef _UAPI__LINUX_NETFILTER_H
+#define _UAPI__LINUX_NETFILTER_H
+
+#include <linux/types.h>
+#include <linux/compiler.h>
+#include <linux/sysctl.h>
+
+
+/* Responses from hook functions. */
+#define NF_DROP 0
+#define NF_ACCEPT 1
+#define NF_STOLEN 2
+#define NF_QUEUE 3
+#define NF_REPEAT 4
+#define NF_STOP 5
+#define NF_MAX_VERDICT NF_STOP
+
+/* we overload the higher bits for encoding auxiliary data such as the queue
+ * number or errno values. Not nice, but better than additional function
+ * arguments. */
+#define NF_VERDICT_MASK 0x000000ff
+
+/* extra verdict flags have mask 0x0000ff00 */
+#define NF_VERDICT_FLAG_QUEUE_BYPASS 0x00008000
+
+/* queue number (NF_QUEUE) or errno (NF_DROP) */
+#define NF_VERDICT_QMASK 0xffff0000
+#define NF_VERDICT_QBITS 16
+
+#define NF_QUEUE_NR(x) ((((x) << 16) & NF_VERDICT_QMASK) | NF_QUEUE)
+
+#define NF_DROP_ERR(x) (((-x) << 16) | NF_DROP)
+
+/* only for userspace compatibility */
+#ifndef __KERNEL__
+/* Generic cache responses from hook functions.
+ <= 0x2000 is used for protocol-flags. */
+#define NFC_UNKNOWN 0x4000
+#define NFC_ALTERED 0x8000
+
+/* NF_VERDICT_BITS should be 8 now, but userspace might break if this changes */
+#define NF_VERDICT_BITS 16
+#endif
+
+enum nf_inet_hooks {
+ NF_INET_PRE_ROUTING,
+ NF_INET_LOCAL_IN,
+ NF_INET_FORWARD,
+ NF_INET_LOCAL_OUT,
+ NF_INET_POST_ROUTING,
+ NF_INET_NUMHOOKS
+};
+
+enum {
+ NFPROTO_UNSPEC = 0,
+ NFPROTO_IPV4 = 2,
+ NFPROTO_ARP = 3,
+ NFPROTO_BRIDGE = 7,
+ NFPROTO_IPV6 = 10,
+ NFPROTO_DECNET = 12,
+ NFPROTO_NUMPROTO,
+};
+
+union nf_inet_addr {
+ __u32 all[4];
+ __be32 ip;
+ __be32 ip6[4];
+ struct in_addr in;
+ struct in6_addr in6;
+};
+
+#endif /* _UAPI__LINUX_NETFILTER_H */
diff --git a/include/linux/netfilter_arp.h b/include/uapi/linux/netfilter_arp.h
similarity index 100%
rename from include/linux/netfilter_arp.h
rename to include/uapi/linux/netfilter_arp.h
diff --git a/include/uapi/linux/netfilter_bridge.h b/include/uapi/linux/netfilter_bridge.h
new file mode 100644
index 0000000..a5eda6d
--- /dev/null
+++ b/include/uapi/linux/netfilter_bridge.h
@@ -0,0 +1,27 @@
+#ifndef _UAPI__LINUX_BRIDGE_NETFILTER_H
+#define _UAPI__LINUX_BRIDGE_NETFILTER_H
+
+/* bridge-specific defines for netfilter.
+ */
+
+#include <linux/netfilter.h>
+#include <linux/if_ether.h>
+#include <linux/if_vlan.h>
+#include <linux/if_pppox.h>
+
+/* Bridge Hooks */
+/* After promisc drops, checksum checks. */
+#define NF_BR_PRE_ROUTING 0
+/* If the packet is destined for this box. */
+#define NF_BR_LOCAL_IN 1
+/* If the packet is destined for another interface. */
+#define NF_BR_FORWARD 2
+/* Packets coming from a local process. */
+#define NF_BR_LOCAL_OUT 3
+/* Packets about to hit the wire. */
+#define NF_BR_POST_ROUTING 4
+/* Not really a hook, but used for the ebtables broute table */
+#define NF_BR_BROUTING 5
+#define NF_BR_NUMHOOKS 6
+
+#endif /* _UAPI__LINUX_BRIDGE_NETFILTER_H */
diff --git a/include/linux/netfilter_decnet.h b/include/uapi/linux/netfilter_decnet.h
similarity index 100%
rename from include/linux/netfilter_decnet.h
rename to include/uapi/linux/netfilter_decnet.h
diff --git a/include/uapi/linux/netfilter_ipv4.h b/include/uapi/linux/netfilter_ipv4.h
new file mode 100644
index 0000000..91ddd1f
--- /dev/null
+++ b/include/uapi/linux/netfilter_ipv4.h
@@ -0,0 +1,81 @@
+/* IPv4-specific defines for netfilter.
+ * (C)1998 Rusty Russell -- This code is GPL.
+ */
+#ifndef _UAPI__LINUX_IP_NETFILTER_H
+#define _UAPI__LINUX_IP_NETFILTER_H
+
+
+#include <linux/netfilter.h>
+
+/* only for userspace compatibility */
+#ifndef __KERNEL__
+
+#include <limits.h> /* for INT_MIN, INT_MAX */
+
+/* IP Cache bits. */
+/* Src IP address. */
+#define NFC_IP_SRC 0x0001
+/* Dest IP address. */
+#define NFC_IP_DST 0x0002
+/* Input device. */
+#define NFC_IP_IF_IN 0x0004
+/* Output device. */
+#define NFC_IP_IF_OUT 0x0008
+/* TOS. */
+#define NFC_IP_TOS 0x0010
+/* Protocol. */
+#define NFC_IP_PROTO 0x0020
+/* IP options. */
+#define NFC_IP_OPTIONS 0x0040
+/* Frag & flags. */
+#define NFC_IP_FRAG 0x0080
+
+/* Per-protocol information: only matters if proto match. */
+/* TCP flags. */
+#define NFC_IP_TCPFLAGS 0x0100
+/* Source port. */
+#define NFC_IP_SRC_PT 0x0200
+/* Dest port. */
+#define NFC_IP_DST_PT 0x0400
+/* Something else about the proto */
+#define NFC_IP_PROTO_UNKNOWN 0x2000
+
+/* IP Hooks */
+/* After promisc drops, checksum checks. */
+#define NF_IP_PRE_ROUTING 0
+/* If the packet is destined for this box. */
+#define NF_IP_LOCAL_IN 1
+/* If the packet is destined for another interface. */
+#define NF_IP_FORWARD 2
+/* Packets coming from a local process. */
+#define NF_IP_LOCAL_OUT 3
+/* Packets about to hit the wire. */
+#define NF_IP_POST_ROUTING 4
+#define NF_IP_NUMHOOKS 5
+#endif /* ! __KERNEL__ */
+
+enum nf_ip_hook_priorities {
+ NF_IP_PRI_FIRST = INT_MIN,
+ NF_IP_PRI_CONNTRACK_DEFRAG = -400,
+ NF_IP_PRI_RAW = -300,
+ NF_IP_PRI_SELINUX_FIRST = -225,
+ NF_IP_PRI_CONNTRACK = -200,
+ NF_IP_PRI_MANGLE = -150,
+ NF_IP_PRI_NAT_DST = -100,
+ NF_IP_PRI_FILTER = 0,
+ NF_IP_PRI_SECURITY = 50,
+ NF_IP_PRI_NAT_SRC = 100,
+ NF_IP_PRI_SELINUX_LAST = 225,
+ NF_IP_PRI_CONNTRACK_HELPER = 300,
+ NF_IP_PRI_CONNTRACK_CONFIRM = INT_MAX,
+ NF_IP_PRI_LAST = INT_MAX,
+};
+
+/* Arguments for setsockopt SOL_IP: */
+/* 2.0 firewalling went from 64 through 71 (and +256, +512, etc). */
+/* 2.2 firewalling (+ masq) went from 64 through 76 */
+/* 2.4 firewalling went 64 through 67. */
+#define SO_ORIGINAL_DST 80
+
+
+#endif /* _UAPI__LINUX_IP_NETFILTER_H */
diff --git a/include/uapi/linux/netfilter_ipv6.h b/include/uapi/linux/netfilter_ipv6.h
new file mode 100644
index 0000000..12497c6
--- /dev/null
+++ b/include/uapi/linux/netfilter_ipv6.h
@@ -0,0 +1,79 @@
+/* IPv6-specific defines for netfilter.
+ * (C)1998 Rusty Russell -- This code is GPL.
+ * (C)1999 David Jeffery
+ * this header was blatantly ripped from netfilter_ipv4.h
+ * it's amazing what adding a bunch of 6s can do =8^)
+ */
+#ifndef _UAPI__LINUX_IP6_NETFILTER_H
+#define _UAPI__LINUX_IP6_NETFILTER_H
+
+
+#include <linux/netfilter.h>
+
+/* only for userspace compatibility */
+#ifndef __KERNEL__
+
+#include <limits.h> /* for INT_MIN, INT_MAX */
+
+/* IP Cache bits. */
+/* Src IP address. */
+#define NFC_IP6_SRC 0x0001
+/* Dest IP address. */
+#define NFC_IP6_DST 0x0002
+/* Input device. */
+#define NFC_IP6_IF_IN 0x0004
+/* Output device. */
+#define NFC_IP6_IF_OUT 0x0008
+/* TOS. */
+#define NFC_IP6_TOS 0x0010
+/* Protocol. */
+#define NFC_IP6_PROTO 0x0020
+/* IP options. */
+#define NFC_IP6_OPTIONS 0x0040
+/* Frag & flags. */
+#define NFC_IP6_FRAG 0x0080
+
+
+/* Per-protocol information: only matters if proto match. */
+/* TCP flags. */
+#define NFC_IP6_TCPFLAGS 0x0100
+/* Source port. */
+#define NFC_IP6_SRC_PT 0x0200
+/* Dest port. */
+#define NFC_IP6_DST_PT 0x0400
+/* Something else about the proto */
+#define NFC_IP6_PROTO_UNKNOWN 0x2000
+
+/* IP6 Hooks */
+/* After promisc drops, checksum checks. */
+#define NF_IP6_PRE_ROUTING 0
+/* If the packet is destined for this box. */
+#define NF_IP6_LOCAL_IN 1
+/* If the packet is destined for another interface. */
+#define NF_IP6_FORWARD 2
+/* Packets coming from a local process. */
+#define NF_IP6_LOCAL_OUT 3
+/* Packets about to hit the wire. */
+#define NF_IP6_POST_ROUTING 4
+#define NF_IP6_NUMHOOKS 5
+#endif /* ! __KERNEL__ */
+
+
+enum nf_ip6_hook_priorities {
+ NF_IP6_PRI_FIRST = INT_MIN,
+ NF_IP6_PRI_CONNTRACK_DEFRAG = -400,
+ NF_IP6_PRI_RAW = -300,
+ NF_IP6_PRI_SELINUX_FIRST = -225,
+ NF_IP6_PRI_CONNTRACK = -200,
+ NF_IP6_PRI_MANGLE = -150,
+ NF_IP6_PRI_NAT_DST = -100,
+ NF_IP6_PRI_FILTER = 0,
+ NF_IP6_PRI_SECURITY = 50,
+ NF_IP6_PRI_NAT_SRC = 100,
+ NF_IP6_PRI_SELINUX_LAST = 225,
+ NF_IP6_PRI_CONNTRACK_HELPER = 300,
+ NF_IP6_PRI_LAST = INT_MAX,
+};
+
+
+#endif /* _UAPI__LINUX_IP6_NETFILTER_H */
diff --git a/include/uapi/linux/netlink.h b/include/uapi/linux/netlink.h
new file mode 100644
index 0000000..78d5b8a
--- /dev/null
+++ b/include/uapi/linux/netlink.h
@@ -0,0 +1,153 @@
+#ifndef _UAPI__LINUX_NETLINK_H
+#define _UAPI__LINUX_NETLINK_H
+
+#include <linux/socket.h> /* for __kernel_sa_family_t */
+#include <linux/types.h>
+
+#define NETLINK_ROUTE 0 /* Routing/device hook */
+#define NETLINK_UNUSED 1 /* Unused number */
+#define NETLINK_USERSOCK 2 /* Reserved for user mode socket protocols */
+#define NETLINK_FIREWALL 3 /* Unused number, formerly ip_queue */
+#define NETLINK_SOCK_DIAG 4 /* socket monitoring */
+#define NETLINK_NFLOG 5 /* netfilter/iptables ULOG */
+#define NETLINK_XFRM 6 /* ipsec */
+#define NETLINK_SELINUX 7 /* SELinux event notifications */
+#define NETLINK_ISCSI 8 /* Open-iSCSI */
+#define NETLINK_AUDIT 9 /* auditing */
+#define NETLINK_FIB_LOOKUP 10
+#define NETLINK_CONNECTOR 11
+#define NETLINK_NETFILTER 12 /* netfilter subsystem */
+#define NETLINK_IP6_FW 13
+#define NETLINK_DNRTMSG 14 /* DECnet routing messages */
+#define NETLINK_KOBJECT_UEVENT 15 /* Kernel messages to userspace */
+#define NETLINK_GENERIC 16
+/* leave room for NETLINK_DM (DM Events) */
+#define NETLINK_SCSITRANSPORT 18 /* SCSI Transports */
+#define NETLINK_ECRYPTFS 19
+#define NETLINK_RDMA 20
+#define NETLINK_CRYPTO 21 /* Crypto layer */
+
+#define NETLINK_INET_DIAG NETLINK_SOCK_DIAG
+
+#define MAX_LINKS 32
+
+struct sockaddr_nl {
+ __kernel_sa_family_t nl_family; /* AF_NETLINK */
+ unsigned short nl_pad; /* zero */
+ __u32 nl_pid; /* port ID */
+ __u32 nl_groups; /* multicast groups mask */
+};
+
+struct nlmsghdr {
+ __u32 nlmsg_len; /* Length of message including header */
+ __u16 nlmsg_type; /* Message content */
+ __u16 nlmsg_flags; /* Additional flags */
+ __u32 nlmsg_seq; /* Sequence number */
+ __u32 nlmsg_pid; /* Sending process port ID */
+};
+
+/* Flags values */
+
+#define NLM_F_REQUEST 1 /* It is request message. */
+#define NLM_F_MULTI 2 /* Multipart message, terminated by NLMSG_DONE */
+#define NLM_F_ACK 4 /* Reply with ack, with zero or error code */
+#define NLM_F_ECHO 8 /* Echo this request */
+#define NLM_F_DUMP_INTR 16 /* Dump was inconsistent due to sequence change */
+
+/* Modifiers to GET request */
+#define NLM_F_ROOT 0x100 /* specify tree root */
+#define NLM_F_MATCH 0x200 /* return all matching */
+#define NLM_F_ATOMIC 0x400 /* atomic GET */
+#define NLM_F_DUMP (NLM_F_ROOT|NLM_F_MATCH)
+
+/* Modifiers to NEW request */
+#define NLM_F_REPLACE 0x100 /* Override existing */
+#define NLM_F_EXCL 0x200 /* Do not touch, if it exists */
+#define NLM_F_CREATE 0x400 /* Create, if it does not exist */
+#define NLM_F_APPEND 0x800 /* Add to end of list */
+
+/*
+ 4.4BSD ADD NLM_F_CREATE|NLM_F_EXCL
+ 4.4BSD CHANGE NLM_F_REPLACE
+
+ True CHANGE NLM_F_CREATE|NLM_F_REPLACE
+ Append NLM_F_CREATE
+ Check NLM_F_EXCL
+ */
+
+#define NLMSG_ALIGNTO 4U
+#define NLMSG_ALIGN(len) ( ((len)+NLMSG_ALIGNTO-1) & ~(NLMSG_ALIGNTO-1) )
+#define NLMSG_HDRLEN ((int) NLMSG_ALIGN(sizeof(struct nlmsghdr)))
+#define NLMSG_LENGTH(len) ((len)+NLMSG_ALIGN(NLMSG_HDRLEN))
+#define NLMSG_SPACE(len) NLMSG_ALIGN(NLMSG_LENGTH(len))
+#define NLMSG_DATA(nlh) ((void*)(((char*)nlh) + NLMSG_LENGTH(0)))
+#define NLMSG_NEXT(nlh,len) ((len) -= NLMSG_ALIGN((nlh)->nlmsg_len), \
+ (struct nlmsghdr*)(((char*)(nlh)) + NLMSG_ALIGN((nlh)->nlmsg_len)))
+#define NLMSG_OK(nlh,len) ((len) >= (int)sizeof(struct nlmsghdr) && \
+ (nlh)->nlmsg_len >= sizeof(struct nlmsghdr) && \
+ (nlh)->nlmsg_len <= (len))
+#define NLMSG_PAYLOAD(nlh,len) ((nlh)->nlmsg_len - NLMSG_SPACE((len)))
+
+#define NLMSG_NOOP 0x1 /* Nothing. */
+#define NLMSG_ERROR 0x2 /* Error */
+#define NLMSG_DONE 0x3 /* End of a dump */
+#define NLMSG_OVERRUN 0x4 /* Data lost */
+
+#define NLMSG_MIN_TYPE 0x10 /* < 0x10: reserved control messages */
+
+struct nlmsgerr {
+ int error;
+ struct nlmsghdr msg;
+};
+
+#define NETLINK_ADD_MEMBERSHIP 1
+#define NETLINK_DROP_MEMBERSHIP 2
+#define NETLINK_PKTINFO 3
+#define NETLINK_BROADCAST_ERROR 4
+#define NETLINK_NO_ENOBUFS 5
+
+struct nl_pktinfo {
+ __u32 group;
+};
+
+#define NET_MAJOR 36 /* Major 36 is reserved for networking */
+
+enum {
+ NETLINK_UNCONNECTED = 0,
+ NETLINK_CONNECTED,
+};
+
+/*
+ * <------- NLA_HDRLEN ------> <-- NLA_ALIGN(payload)-->
+ * +---------------------+- - -+- - - - - - - - - -+- - -+
+ * | Header | Pad | Payload | Pad |
+ * | (struct nlattr) | ing | | ing |
+ * +---------------------+- - -+- - - - - - - - - -+- - -+
+ * <-------------- nlattr->nla_len -------------->
+ */
+
+struct nlattr {
+ __u16 nla_len;
+ __u16 nla_type;
+};
+
+/*
+ * nla_type (16 bits)
+ * +---+---+-------------------------------+
+ * | N | O | Attribute Type |
+ * +---+---+-------------------------------+
+ * N := Carries nested attributes
+ * O := Payload stored in network byte order
+ *
+ * Note: The N and O flag are mutually exclusive.
+ */
+#define NLA_F_NESTED (1 << 15)
+#define NLA_F_NET_BYTEORDER (1 << 14)
+#define NLA_TYPE_MASK ~(NLA_F_NESTED | NLA_F_NET_BYTEORDER)
+
+#define NLA_ALIGNTO 4
+#define NLA_ALIGN(len) (((len) + NLA_ALIGNTO - 1) & ~(NLA_ALIGNTO - 1))
+#define NLA_HDRLEN ((int) NLA_ALIGN(sizeof(struct nlattr)))
+
+
+#endif /* _UAPI__LINUX_NETLINK_H */
diff --git a/include/linux/netrom.h b/include/uapi/linux/netrom.h
similarity index 100%
rename from include/linux/netrom.h
rename to include/uapi/linux/netrom.h
diff --git a/include/linux/nfc.h b/include/uapi/linux/nfc.h
similarity index 100%
rename from include/linux/nfc.h
rename to include/uapi/linux/nfc.h
diff --git a/include/uapi/linux/nfs.h b/include/uapi/linux/nfs.h
new file mode 100644
index 0000000..5199a36
--- /dev/null
+++ b/include/uapi/linux/nfs.h
@@ -0,0 +1,131 @@
+/*
+ * NFS protocol definitions
+ *
+ * This file contains constants mostly for Version 2 of the protocol,
+ * but also has a couple of NFSv3 bits in (notably the error codes).
+ */
+#ifndef _UAPI_LINUX_NFS_H
+#define _UAPI_LINUX_NFS_H
+
+#define NFS_PROGRAM 100003
+#define NFS_PORT 2049
+#define NFS_MAXDATA 8192
+#define NFS_MAXPATHLEN 1024
+#define NFS_MAXNAMLEN 255
+#define NFS_MAXGROUPS 16
+#define NFS_FHSIZE 32
+#define NFS_COOKIESIZE 4
+#define NFS_FIFO_DEV (-1)
+#define NFSMODE_FMT 0170000
+#define NFSMODE_DIR 0040000
+#define NFSMODE_CHR 0020000
+#define NFSMODE_BLK 0060000
+#define NFSMODE_REG 0100000
+#define NFSMODE_LNK 0120000
+#define NFSMODE_SOCK 0140000
+#define NFSMODE_FIFO 0010000
+
+#define NFS_MNT_PROGRAM 100005
+#define NFS_MNT_VERSION 1
+#define NFS_MNT3_VERSION 3
+
+#define NFS_PIPE_DIRNAME "nfs"
+
+/*
+ * NFS stats. The good thing with these values is that NFSv3 errors are
+ * a superset of NFSv2 errors (with the exception of NFSERR_WFLUSH which
+ * no-one uses anyway), so we can happily mix code as long as we make sure
+ * no NFSv3 errors are returned to NFSv2 clients.
+ * Error codes that have a `--' in the v2 column are not part of the
+ * standard, but seem to be widely used nevertheless.
+ */
+ enum nfs_stat {
+ NFS_OK = 0, /* v2 v3 v4 */
+ NFSERR_PERM = 1, /* v2 v3 v4 */
+ NFSERR_NOENT = 2, /* v2 v3 v4 */
+ NFSERR_IO = 5, /* v2 v3 v4 */
+ NFSERR_NXIO = 6, /* v2 v3 v4 */
+ NFSERR_EAGAIN = 11, /* v2 v3 */
+ NFSERR_ACCES = 13, /* v2 v3 v4 */
+ NFSERR_EXIST = 17, /* v2 v3 v4 */
+ NFSERR_XDEV = 18, /* v3 v4 */
+ NFSERR_NODEV = 19, /* v2 v3 v4 */
+ NFSERR_NOTDIR = 20, /* v2 v3 v4 */
+ NFSERR_ISDIR = 21, /* v2 v3 v4 */
+ NFSERR_INVAL = 22, /* v2 v3 v4 */
+ NFSERR_FBIG = 27, /* v2 v3 v4 */
+ NFSERR_NOSPC = 28, /* v2 v3 v4 */
+ NFSERR_ROFS = 30, /* v2 v3 v4 */
+ NFSERR_MLINK = 31, /* v3 v4 */
+ NFSERR_OPNOTSUPP = 45, /* v2 v3 */
+ NFSERR_NAMETOOLONG = 63, /* v2 v3 v4 */
+ NFSERR_NOTEMPTY = 66, /* v2 v3 v4 */
+ NFSERR_DQUOT = 69, /* v2 v3 v4 */
+ NFSERR_STALE = 70, /* v2 v3 v4 */
+ NFSERR_REMOTE = 71, /* v2 v3 */
+ NFSERR_WFLUSH = 99, /* v2 */
+ NFSERR_BADHANDLE = 10001, /* v3 v4 */
+ NFSERR_NOT_SYNC = 10002, /* v3 */
+ NFSERR_BAD_COOKIE = 10003, /* v3 v4 */
+ NFSERR_NOTSUPP = 10004, /* v3 v4 */
+ NFSERR_TOOSMALL = 10005, /* v3 v4 */
+ NFSERR_SERVERFAULT = 10006, /* v3 v4 */
+ NFSERR_BADTYPE = 10007, /* v3 v4 */
+ NFSERR_JUKEBOX = 10008, /* v3 v4 */
+ NFSERR_SAME = 10009, /* v4 */
+ NFSERR_DENIED = 10010, /* v4 */
+ NFSERR_EXPIRED = 10011, /* v4 */
+ NFSERR_LOCKED = 10012, /* v4 */
+ NFSERR_GRACE = 10013, /* v4 */
+ NFSERR_FHEXPIRED = 10014, /* v4 */
+ NFSERR_SHARE_DENIED = 10015, /* v4 */
+ NFSERR_WRONGSEC = 10016, /* v4 */
+ NFSERR_CLID_INUSE = 10017, /* v4 */
+ NFSERR_RESOURCE = 10018, /* v4 */
+ NFSERR_MOVED = 10019, /* v4 */
+ NFSERR_NOFILEHANDLE = 10020, /* v4 */
+ NFSERR_MINOR_VERS_MISMATCH = 10021, /* v4 */
+ NFSERR_STALE_CLIENTID = 10022, /* v4 */
+ NFSERR_STALE_STATEID = 10023, /* v4 */
+ NFSERR_OLD_STATEID = 10024, /* v4 */
+ NFSERR_BAD_STATEID = 10025, /* v4 */
+ NFSERR_BAD_SEQID = 10026, /* v4 */
+ NFSERR_NOT_SAME = 10027, /* v4 */
+ NFSERR_LOCK_RANGE = 10028, /* v4 */
+ NFSERR_SYMLINK = 10029, /* v4 */
+ NFSERR_RESTOREFH = 10030, /* v4 */
+ NFSERR_LEASE_MOVED = 10031, /* v4 */
+ NFSERR_ATTRNOTSUPP = 10032, /* v4 */
+ NFSERR_NO_GRACE = 10033, /* v4 */
+ NFSERR_RECLAIM_BAD = 10034, /* v4 */
+ NFSERR_RECLAIM_CONFLICT = 10035,/* v4 */
+ NFSERR_BAD_XDR = 10036, /* v4 */
+ NFSERR_LOCKS_HELD = 10037, /* v4 */
+ NFSERR_OPENMODE = 10038, /* v4 */
+ NFSERR_BADOWNER = 10039, /* v4 */
+ NFSERR_BADCHAR = 10040, /* v4 */
+ NFSERR_BADNAME = 10041, /* v4 */
+ NFSERR_BAD_RANGE = 10042, /* v4 */
+ NFSERR_LOCK_NOTSUPP = 10043, /* v4 */
+ NFSERR_OP_ILLEGAL = 10044, /* v4 */
+ NFSERR_DEADLOCK = 10045, /* v4 */
+ NFSERR_FILE_OPEN = 10046, /* v4 */
+ NFSERR_ADMIN_REVOKED = 10047, /* v4 */
+ NFSERR_CB_PATH_DOWN = 10048, /* v4 */
+};
+
+/* NFSv2 file types - beware, these are not the same in NFSv3 */
+
+enum nfs_ftype {
+ NFNON = 0,
+ NFREG = 1,
+ NFDIR = 2,
+ NFBLK = 3,
+ NFCHR = 4,
+ NFLNK = 5,
+ NFSOCK = 6,
+ NFBAD = 7,
+ NFFIFO = 8
+};
+
+#endif /* _UAPI_LINUX_NFS_H */
diff --git a/include/linux/nfs2.h b/include/uapi/linux/nfs2.h
similarity index 100%
rename from include/linux/nfs2.h
rename to include/uapi/linux/nfs2.h
diff --git a/include/uapi/linux/nfs3.h b/include/uapi/linux/nfs3.h
new file mode 100644
index 0000000..231ef4e
--- /dev/null
+++ b/include/uapi/linux/nfs3.h
@@ -0,0 +1,97 @@
+/*
+ * NFSv3 protocol definitions
+ */
+#ifndef _UAPI_LINUX_NFS3_H
+#define _UAPI_LINUX_NFS3_H
+
+#define NFS3_PORT 2049
+#define NFS3_MAXDATA 32768
+#define NFS3_MAXPATHLEN PATH_MAX
+#define NFS3_MAXNAMLEN NAME_MAX
+#define NFS3_MAXGROUPS 16
+#define NFS3_FHSIZE 64
+#define NFS3_COOKIESIZE 4
+#define NFS3_CREATEVERFSIZE 8
+#define NFS3_COOKIEVERFSIZE 8
+#define NFS3_WRITEVERFSIZE 8
+#define NFS3_FIFO_DEV (-1)
+#define NFS3MODE_FMT 0170000
+#define NFS3MODE_DIR 0040000
+#define NFS3MODE_CHR 0020000
+#define NFS3MODE_BLK 0060000
+#define NFS3MODE_REG 0100000
+#define NFS3MODE_LNK 0120000
+#define NFS3MODE_SOCK 0140000
+#define NFS3MODE_FIFO 0010000
+
+/* Flags for access() call */
+#define NFS3_ACCESS_READ 0x0001
+#define NFS3_ACCESS_LOOKUP 0x0002
+#define NFS3_ACCESS_MODIFY 0x0004
+#define NFS3_ACCESS_EXTEND 0x0008
+#define NFS3_ACCESS_DELETE 0x0010
+#define NFS3_ACCESS_EXECUTE 0x0020
+#define NFS3_ACCESS_FULL 0x003f
+
+/* Flags for create mode */
+enum nfs3_createmode {
+ NFS3_CREATE_UNCHECKED = 0,
+ NFS3_CREATE_GUARDED = 1,
+ NFS3_CREATE_EXCLUSIVE = 2
+};
+
+/* NFSv3 file system properties */
+#define NFS3_FSF_LINK 0x0001
+#define NFS3_FSF_SYMLINK 0x0002
+#define NFS3_FSF_HOMOGENEOUS 0x0008
+#define NFS3_FSF_CANSETTIME 0x0010
+/* Some shorthands. See fs/nfsd/nfs3proc.c */
+#define NFS3_FSF_DEFAULT 0x001B
+#define NFS3_FSF_BILLYBOY 0x0018
+#define NFS3_FSF_READONLY 0x0008
+
+enum nfs3_ftype {
+ NF3NON = 0,
+ NF3REG = 1,
+ NF3DIR = 2,
+ NF3BLK = 3,
+ NF3CHR = 4,
+ NF3LNK = 5,
+ NF3SOCK = 6,
+ NF3FIFO = 7, /* changed from NFSv2 (was 8) */
+ NF3BAD = 8
+};
+
+struct nfs3_fh {
+ unsigned short size;
+ unsigned char data[NFS3_FHSIZE];
+};
+
+#define NFS3_VERSION 3
+#define NFS3PROC_NULL 0
+#define NFS3PROC_GETATTR 1
+#define NFS3PROC_SETATTR 2
+#define NFS3PROC_LOOKUP 3
+#define NFS3PROC_ACCESS 4
+#define NFS3PROC_READLINK 5
+#define NFS3PROC_READ 6
+#define NFS3PROC_WRITE 7
+#define NFS3PROC_CREATE 8
+#define NFS3PROC_MKDIR 9
+#define NFS3PROC_SYMLINK 10
+#define NFS3PROC_MKNOD 11
+#define NFS3PROC_REMOVE 12
+#define NFS3PROC_RMDIR 13
+#define NFS3PROC_RENAME 14
+#define NFS3PROC_LINK 15
+#define NFS3PROC_READDIR 16
+#define NFS3PROC_READDIRPLUS 17
+#define NFS3PROC_FSSTAT 18
+#define NFS3PROC_FSINFO 19
+#define NFS3PROC_PATHCONF 20
+#define NFS3PROC_COMMIT 21
+
+#define NFS_MNT3_VERSION 3
+
+
+#endif /* _UAPI_LINUX_NFS3_H */
diff --git a/include/uapi/linux/nfs4.h b/include/uapi/linux/nfs4.h
new file mode 100644
index 0000000..788128e
--- /dev/null
+++ b/include/uapi/linux/nfs4.h
@@ -0,0 +1,178 @@
+/*
+ * include/linux/nfs4.h
+ *
+ * NFSv4 protocol definitions.
+ *
+ * Copyright (c) 2002 The Regents of the University of Michigan.
+ * All rights reserved.
+ *
+ * Kendrick Smith <kmsmith@umich.edu>
+ * Andy Adamson <andros@umich.edu>
+ */
+
+#ifndef _UAPI_LINUX_NFS4_H
+#define _UAPI_LINUX_NFS4_H
+
+#include <linux/types.h>
+
+#define NFS4_BITMAP_SIZE 2
+#define NFS4_VERIFIER_SIZE 8
+#define NFS4_STATEID_SEQID_SIZE 4
+#define NFS4_STATEID_OTHER_SIZE 12
+#define NFS4_STATEID_SIZE (NFS4_STATEID_SEQID_SIZE + NFS4_STATEID_OTHER_SIZE)
+#define NFS4_FHSIZE 128
+#define NFS4_MAXPATHLEN PATH_MAX
+#define NFS4_MAXNAMLEN NAME_MAX
+#define NFS4_OPAQUE_LIMIT 1024
+#define NFS4_MAX_SESSIONID_LEN 16
+
+#define NFS4_ACCESS_READ 0x0001
+#define NFS4_ACCESS_LOOKUP 0x0002
+#define NFS4_ACCESS_MODIFY 0x0004
+#define NFS4_ACCESS_EXTEND 0x0008
+#define NFS4_ACCESS_DELETE 0x0010
+#define NFS4_ACCESS_EXECUTE 0x0020
+
+#define NFS4_FH_PERSISTENT 0x0000
+#define NFS4_FH_NOEXPIRE_WITH_OPEN 0x0001
+#define NFS4_FH_VOLATILE_ANY 0x0002
+#define NFS4_FH_VOL_MIGRATION 0x0004
+#define NFS4_FH_VOL_RENAME 0x0008
+
+#define NFS4_OPEN_RESULT_CONFIRM 0x0002
+#define NFS4_OPEN_RESULT_LOCKTYPE_POSIX 0x0004
+
+#define NFS4_SHARE_ACCESS_MASK 0x000F
+#define NFS4_SHARE_ACCESS_READ 0x0001
+#define NFS4_SHARE_ACCESS_WRITE 0x0002
+#define NFS4_SHARE_ACCESS_BOTH 0x0003
+#define NFS4_SHARE_DENY_READ 0x0001
+#define NFS4_SHARE_DENY_WRITE 0x0002
+#define NFS4_SHARE_DENY_BOTH 0x0003
+
+/* nfs41 */
+#define NFS4_SHARE_WANT_MASK 0xFF00
+#define NFS4_SHARE_WANT_NO_PREFERENCE 0x0000
+#define NFS4_SHARE_WANT_READ_DELEG 0x0100
+#define NFS4_SHARE_WANT_WRITE_DELEG 0x0200
+#define NFS4_SHARE_WANT_ANY_DELEG 0x0300
+#define NFS4_SHARE_WANT_NO_DELEG 0x0400
+#define NFS4_SHARE_WANT_CANCEL 0x0500
+
+#define NFS4_SHARE_WHEN_MASK 0xF0000
+#define NFS4_SHARE_SIGNAL_DELEG_WHEN_RESRC_AVAIL 0x10000
+#define NFS4_SHARE_PUSH_DELEG_WHEN_UNCONTENDED 0x20000
+
+#define NFS4_CDFC4_FORE 0x1
+#define NFS4_CDFC4_BACK 0x2
+#define NFS4_CDFC4_BOTH 0x3
+#define NFS4_CDFC4_FORE_OR_BOTH 0x3
+#define NFS4_CDFC4_BACK_OR_BOTH 0x7
+
+#define NFS4_CDFS4_FORE 0x1
+#define NFS4_CDFS4_BACK 0x2
+#define NFS4_CDFS4_BOTH 0x3
+
+#define NFS4_SET_TO_SERVER_TIME 0
+#define NFS4_SET_TO_CLIENT_TIME 1
+
+#define NFS4_ACE_ACCESS_ALLOWED_ACE_TYPE 0
+#define NFS4_ACE_ACCESS_DENIED_ACE_TYPE 1
+#define NFS4_ACE_SYSTEM_AUDIT_ACE_TYPE 2
+#define NFS4_ACE_SYSTEM_ALARM_ACE_TYPE 3
+
+#define ACL4_SUPPORT_ALLOW_ACL 0x01
+#define ACL4_SUPPORT_DENY_ACL 0x02
+#define ACL4_SUPPORT_AUDIT_ACL 0x04
+#define ACL4_SUPPORT_ALARM_ACL 0x08
+
+#define NFS4_ACE_FILE_INHERIT_ACE 0x00000001
+#define NFS4_ACE_DIRECTORY_INHERIT_ACE 0x00000002
+#define NFS4_ACE_NO_PROPAGATE_INHERIT_ACE 0x00000004
+#define NFS4_ACE_INHERIT_ONLY_ACE 0x00000008
+#define NFS4_ACE_SUCCESSFUL_ACCESS_ACE_FLAG 0x00000010
+#define NFS4_ACE_FAILED_ACCESS_ACE_FLAG 0x00000020
+#define NFS4_ACE_IDENTIFIER_GROUP 0x00000040
+
+#define NFS4_ACE_READ_DATA 0x00000001
+#define NFS4_ACE_LIST_DIRECTORY 0x00000001
+#define NFS4_ACE_WRITE_DATA 0x00000002
+#define NFS4_ACE_ADD_FILE 0x00000002
+#define NFS4_ACE_APPEND_DATA 0x00000004
+#define NFS4_ACE_ADD_SUBDIRECTORY 0x00000004
+#define NFS4_ACE_READ_NAMED_ATTRS 0x00000008
+#define NFS4_ACE_WRITE_NAMED_ATTRS 0x00000010
+#define NFS4_ACE_EXECUTE 0x00000020
+#define NFS4_ACE_DELETE_CHILD 0x00000040
+#define NFS4_ACE_READ_ATTRIBUTES 0x00000080
+#define NFS4_ACE_WRITE_ATTRIBUTES 0x00000100
+#define NFS4_ACE_DELETE 0x00010000
+#define NFS4_ACE_READ_ACL 0x00020000
+#define NFS4_ACE_WRITE_ACL 0x00040000
+#define NFS4_ACE_WRITE_OWNER 0x00080000
+#define NFS4_ACE_SYNCHRONIZE 0x00100000
+#define NFS4_ACE_GENERIC_READ 0x00120081
+#define NFS4_ACE_GENERIC_WRITE 0x00160106
+#define NFS4_ACE_GENERIC_EXECUTE 0x001200A0
+#define NFS4_ACE_MASK_ALL 0x001F01FF
+
+#define EXCHGID4_FLAG_SUPP_MOVED_REFER 0x00000001
+#define EXCHGID4_FLAG_SUPP_MOVED_MIGR 0x00000002
+#define EXCHGID4_FLAG_BIND_PRINC_STATEID 0x00000100
+
+#define EXCHGID4_FLAG_USE_NON_PNFS 0x00010000
+#define EXCHGID4_FLAG_USE_PNFS_MDS 0x00020000
+#define EXCHGID4_FLAG_USE_PNFS_DS 0x00040000
+#define EXCHGID4_FLAG_MASK_PNFS 0x00070000
+
+#define EXCHGID4_FLAG_UPD_CONFIRMED_REC_A 0x40000000
+#define EXCHGID4_FLAG_CONFIRMED_R 0x80000000
+/*
+ * Since the validity of these bits depends on whether
+ * they're set in the argument or response, have separate
+ * invalid flag masks for arg (_A) and resp (_R).
+ */
+#define EXCHGID4_FLAG_MASK_A 0x40070103
+#define EXCHGID4_FLAG_MASK_R 0x80070103
+
+#define SEQ4_STATUS_CB_PATH_DOWN 0x00000001
+#define SEQ4_STATUS_CB_GSS_CONTEXTS_EXPIRING 0x00000002
+#define SEQ4_STATUS_CB_GSS_CONTEXTS_EXPIRED 0x00000004
+#define SEQ4_STATUS_EXPIRED_ALL_STATE_REVOKED 0x00000008
+#define SEQ4_STATUS_EXPIRED_SOME_STATE_REVOKED 0x00000010
+#define SEQ4_STATUS_ADMIN_STATE_REVOKED 0x00000020
+#define SEQ4_STATUS_RECALLABLE_STATE_REVOKED 0x00000040
+#define SEQ4_STATUS_LEASE_MOVED 0x00000080
+#define SEQ4_STATUS_RESTART_RECLAIM_NEEDED 0x00000100
+#define SEQ4_STATUS_CB_PATH_DOWN_SESSION 0x00000200
+#define SEQ4_STATUS_BACKCHANNEL_FAULT 0x00000400
+
+#define NFS4_SECINFO_STYLE4_CURRENT_FH 0
+#define NFS4_SECINFO_STYLE4_PARENT 1
+
+#define NFS4_MAX_UINT64 (~(u64)0)
+
+/* An NFS4 sessions server must support at least NFS4_MAX_OPS operations.
+ * If a compound requires more operations, adjust NFS4_MAX_OPS accordingly.
+ */
+#define NFS4_MAX_OPS 8
+
+/* Our NFS4 client back channel server only wants the cb_sequene and the
+ * actual operation per compound
+ */
+#define NFS4_MAX_BACK_CHANNEL_OPS 2
+
+enum nfs4_acl_whotype {
+ NFS4_ACL_WHO_NAMED = 0,
+ NFS4_ACL_WHO_OWNER,
+ NFS4_ACL_WHO_GROUP,
+ NFS4_ACL_WHO_EVERYONE,
+};
+
+#endif /* _UAPI_LINUX_NFS4_H */
+
+/*
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ */
diff --git a/include/linux/nfs4_mount.h b/include/uapi/linux/nfs4_mount.h
similarity index 100%
rename from include/linux/nfs4_mount.h
rename to include/uapi/linux/nfs4_mount.h
diff --git a/include/uapi/linux/nfs_fs.h b/include/uapi/linux/nfs_fs.h
new file mode 100644
index 0000000..4914228
--- /dev/null
+++ b/include/uapi/linux/nfs_fs.h
@@ -0,0 +1,61 @@
+/*
+ * linux/include/linux/nfs_fs.h
+ *
+ * Copyright (C) 1992 Rick Sladkey
+ *
+ * OS-specific nfs filesystem definitions and declarations
+ */
+
+#ifndef _UAPI_LINUX_NFS_FS_H
+#define _UAPI_LINUX_NFS_FS_H
+
+#include <linux/magic.h>
+
+/* Default timeout values */
+#define NFS_DEF_UDP_TIMEO (11)
+#define NFS_DEF_UDP_RETRANS (3)
+#define NFS_DEF_TCP_TIMEO (600)
+#define NFS_DEF_TCP_RETRANS (2)
+
+#define NFS_MAX_UDP_TIMEOUT (60*HZ)
+#define NFS_MAX_TCP_TIMEOUT (600*HZ)
+
+#define NFS_DEF_ACREGMIN (3)
+#define NFS_DEF_ACREGMAX (60)
+#define NFS_DEF_ACDIRMIN (30)
+#define NFS_DEF_ACDIRMAX (60)
+
+/*
+ * When flushing a cluster of dirty pages, there can be different
+ * strategies:
+ */
+#define FLUSH_SYNC 1 /* file being synced, or contention */
+#define FLUSH_STABLE 4 /* commit to stable storage */
+#define FLUSH_LOWPRI 8 /* low priority background flush */
+#define FLUSH_HIGHPRI 16 /* high priority memory reclaim flush */
+#define FLUSH_COND_STABLE 32 /* conditional stable write - only stable
+ * if everything fits in one RPC */
+
+
+/*
+ * NFS debug flags
+ */
+#define NFSDBG_VFS 0x0001
+#define NFSDBG_DIRCACHE 0x0002
+#define NFSDBG_LOOKUPCACHE 0x0004
+#define NFSDBG_PAGECACHE 0x0008
+#define NFSDBG_PROC 0x0010
+#define NFSDBG_XDR 0x0020
+#define NFSDBG_FILE 0x0040
+#define NFSDBG_ROOT 0x0080
+#define NFSDBG_CALLBACK 0x0100
+#define NFSDBG_CLIENT 0x0200
+#define NFSDBG_MOUNT 0x0400
+#define NFSDBG_FSCACHE 0x0800
+#define NFSDBG_PNFS 0x1000
+#define NFSDBG_PNFS_LD 0x2000
+#define NFSDBG_STATE 0x4000
+#define NFSDBG_ALL 0xFFFF
+
+
+#endif /* _UAPI_LINUX_NFS_FS_H */
diff --git a/include/uapi/linux/nfs_idmap.h b/include/uapi/linux/nfs_idmap.h
new file mode 100644
index 0000000..8d4b1c7
--- /dev/null
+++ b/include/uapi/linux/nfs_idmap.h
@@ -0,0 +1,65 @@
+/*
+ * include/linux/nfs_idmap.h
+ *
+ * UID and GID to name mapping for clients.
+ *
+ * Copyright (c) 2002 The Regents of the University of Michigan.
+ * All rights reserved.
+ *
+ * Marius Aamodt Eriksen <marius@umich.edu>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the University nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _UAPINFS_IDMAP_H
+#define _UAPINFS_IDMAP_H
+
+#include <linux/types.h>
+
+/* XXX from bits/utmp.h */
+#define IDMAP_NAMESZ 128
+
+#define IDMAP_TYPE_USER 0
+#define IDMAP_TYPE_GROUP 1
+
+#define IDMAP_CONV_IDTONAME 0
+#define IDMAP_CONV_NAMETOID 1
+
+#define IDMAP_STATUS_INVALIDMSG 0x01
+#define IDMAP_STATUS_AGAIN 0x02
+#define IDMAP_STATUS_LOOKUPFAIL 0x04
+#define IDMAP_STATUS_SUCCESS 0x08
+
+struct idmap_msg {
+ __u8 im_type;
+ __u8 im_conv;
+ char im_name[IDMAP_NAMESZ];
+ __u32 im_id;
+ __u8 im_status;
+};
+
+
+#endif /* _UAPINFS_IDMAP_H */
diff --git a/include/linux/nfs_mount.h b/include/uapi/linux/nfs_mount.h
similarity index 100%
rename from include/linux/nfs_mount.h
rename to include/uapi/linux/nfs_mount.h
diff --git a/include/uapi/linux/nfsacl.h b/include/uapi/linux/nfsacl.h
new file mode 100644
index 0000000..9bb9771
--- /dev/null
+++ b/include/uapi/linux/nfsacl.h
@@ -0,0 +1,29 @@
+/*
+ * File: linux/nfsacl.h
+ *
+ * (C) 2003 Andreas Gruenbacher <agruen@suse.de>
+ */
+#ifndef _UAPI__LINUX_NFSACL_H
+#define _UAPI__LINUX_NFSACL_H
+
+#define NFS_ACL_PROGRAM 100227
+
+#define ACLPROC2_GETACL 1
+#define ACLPROC2_SETACL 2
+#define ACLPROC2_GETATTR 3
+#define ACLPROC2_ACCESS 4
+
+#define ACLPROC3_GETACL 1
+#define ACLPROC3_SETACL 2
+
+
+/* Flags for the getacl/setacl mode */
+#define NFS_ACL 0x0001
+#define NFS_ACLCNT 0x0002
+#define NFS_DFACL 0x0004
+#define NFS_DFACLCNT 0x0008
+
+/* Flag for Default ACL entries */
+#define NFS_ACL_DEFAULT 0x1000
+
+#endif /* _UAPI__LINUX_NFSACL_H */
diff --git a/include/linux/nl80211.h b/include/uapi/linux/nl80211.h
similarity index 100%
rename from include/linux/nl80211.h
rename to include/uapi/linux/nl80211.h
diff --git a/include/uapi/linux/nubus.h b/include/uapi/linux/nubus.h
new file mode 100644
index 0000000..77513d2
--- /dev/null
+++ b/include/uapi/linux/nubus.h
@@ -0,0 +1,244 @@
+/*
+ nubus.h: various definitions and prototypes for NuBus drivers to use.
+
+ Originally written by Alan Cox.
+
+ Hacked to death by C. Scott Ananian and David Huggins-Daines.
+
+ Some of the constants in here are from the corresponding
+ NetBSD/OpenBSD header file, by Allen Briggs. We figured out the
+ rest of them on our own. */
+
+#ifndef _UAPILINUX_NUBUS_H
+#define _UAPILINUX_NUBUS_H
+
+#include <linux/types.h>
+
+enum nubus_category {
+ NUBUS_CAT_BOARD = 0x0001,
+ NUBUS_CAT_DISPLAY = 0x0003,
+ NUBUS_CAT_NETWORK = 0x0004,
+ NUBUS_CAT_COMMUNICATIONS = 0x0006,
+ NUBUS_CAT_FONT = 0x0009,
+ NUBUS_CAT_CPU = 0x000A,
+ /* For lack of a better name */
+ NUBUS_CAT_DUODOCK = 0x0020
+};
+
+enum nubus_type_network {
+ NUBUS_TYPE_ETHERNET = 0x0001,
+ NUBUS_TYPE_RS232 = 0x0002
+};
+
+enum nubus_type_display {
+ NUBUS_TYPE_VIDEO = 0x0001
+};
+
+enum nubus_type_cpu {
+ NUBUS_TYPE_68020 = 0x0003,
+ NUBUS_TYPE_68030 = 0x0004,
+ NUBUS_TYPE_68040 = 0x0005
+};
+
+/* Known <Cat,Type,SW,HW> tuples: (according to TattleTech and Slots)
+ * 68030 motherboards: <10,4,0,24>
+ * 68040 motherboards: <10,5,0,24>
+ * DuoDock Plus: <32,1,1,2>
+ *
+ * Toby Frame Buffer card: <3,1,1,1>
+ * RBV built-in video (IIci): <3,1,1,24>
+ * Valkyrie built-in video (Q630): <3,1,1,46>
+ * Macintosh Display Card: <3,1,1,25>
+ * Sonora built-in video (P460): <3,1,1,34>
+ * Jet framebuffer (DuoDock Plus): <3,1,1,41>
+ *
+ * SONIC comm-slot/on-board and DuoDock Ethernet: <4,1,1,272>
+ * SONIC LC-PDS Ethernet (Dayna, but like Apple 16-bit, sort of): <4,1,1,271>
+ * Apple SONIC LC-PDS Ethernet ("Apple Ethernet LC Twisted-Pair Card"): <4,1,0,281>
+ * Sonic Systems Ethernet A-Series Card: <4,1,268,256>
+ * Asante MacCon NuBus-A: <4,1,260,256> (alpha-1.0,1.1 revision)
+ * ROM on the above card: <2,1,0,0>
+ * Cabletron ethernet card: <4,1,1,265>
+ * Farallon ethernet card: <4,1,268,256> (identical to Sonic Systems card)
+ * Kinetics EtherPort IIN: <4,1,259,262>
+ * API Engineering EtherRun_LCa PDS enet card: <4,1,282,256>
+ *
+ * Add your devices to the list! You can obtain the "Slots" utility
+ * from Apple's FTP site at:
+ * ftp://dev.apple.com/devworld/Tool_Chest/Devices_-_Hardware/NuBus_Slot_Manager/
+ *
+ * Alternately, TattleTech can be found at any Info-Mac mirror site.
+ * or from its distribution site: ftp://ftp.decismkr.com/dms
+ */
+
+/* DrSW: Uniquely identifies the software interface to a board. This
+ is usually the one you want to look at when writing a driver. It's
+ not as useful as you think, though, because as we should know by
+ now (duh), "Apple Compatible" can mean a lot of things... */
+
+/* Add known DrSW values here */
+enum nubus_drsw {
+ /* NUBUS_CAT_DISPLAY */
+ NUBUS_DRSW_APPLE = 0x0001,
+ NUBUS_DRSW_APPLE_HIRES = 0x0013, /* MacII HiRes card driver */
+
+ /* NUBUS_CAT_NETWORK */
+ NUBUS_DRSW_3COM = 0x0000,
+ NUBUS_DRSW_CABLETRON = 0x0001,
+ NUBUS_DRSW_SONIC_LC = 0x0001,
+ NUBUS_DRSW_KINETICS = 0x0103,
+ NUBUS_DRSW_ASANTE = 0x0104,
+ NUBUS_DRSW_TECHWORKS = 0x0109,
+ NUBUS_DRSW_DAYNA = 0x010b,
+ NUBUS_DRSW_FARALLON = 0x010c,
+ NUBUS_DRSW_APPLE_SN = 0x010f,
+ NUBUS_DRSW_DAYNA2 = 0x0115,
+ NUBUS_DRSW_FOCUS = 0x011a,
+ NUBUS_DRSW_ASANTE_CS = 0x011d, /* use asante SMC9194 driver */
+ NUBUS_DRSW_DAYNA_LC = 0x011e,
+
+ /* NUBUS_CAT_CPU */
+ NUBUS_DRSW_NONE = 0x0000,
+};
+
+/* DrHW: Uniquely identifies the hardware interface to a board (or at
+ least, it should... some video cards are known to incorrectly
+ identify themselves as Toby cards) */
+
+/* Add known DrHW values here */
+enum nubus_drhw {
+ /* NUBUS_CAT_DISPLAY */
+ NUBUS_DRHW_APPLE_TFB = 0x0001, /* Toby frame buffer card */
+ NUBUS_DRHW_APPLE_WVC = 0x0006, /* Apple Workstation Video Card */
+ NUBUS_DRHW_SIGMA_CLRMAX = 0x0007, /* Sigma Design ColorMax */
+ NUBUS_DRHW_APPLE_SE30 = 0x0009, /* Apple SE/30 video */
+ NUBUS_DRHW_APPLE_HRVC = 0x0013, /* Mac II High-Res Video Card */
+ NUBUS_DRHW_APPLE_PVC = 0x0017, /* Mac II Portrait Video Card */
+ NUBUS_DRHW_APPLE_RBV1 = 0x0018, /* IIci RBV video */
+ NUBUS_DRHW_APPLE_MDC = 0x0019, /* Macintosh Display Card */
+ NUBUS_DRHW_APPLE_SONORA = 0x0022, /* Sonora built-in video */
+ NUBUS_DRHW_APPLE_24AC = 0x002b, /* Mac 24AC Video Card */
+ NUBUS_DRHW_APPLE_VALKYRIE = 0x002e,
+ NUBUS_DRHW_APPLE_JET = 0x0029, /* Jet framebuffer (DuoDock) */
+ NUBUS_DRHW_SMAC_GFX = 0x0105, /* SuperMac GFX */
+ NUBUS_DRHW_RASTER_CB264 = 0x013B, /* RasterOps ColorBoard 264 */
+ NUBUS_DRHW_MICRON_XCEED = 0x0146, /* Micron Exceed color */
+ NUBUS_DRHW_RDIUS_GSC = 0x0153, /* Radius GS/C */
+ NUBUS_DRHW_SMAC_SPEC8 = 0x017B, /* SuperMac Spectrum/8 */
+ NUBUS_DRHW_SMAC_SPEC24 = 0x017C, /* SuperMac Spectrum/24 */
+ NUBUS_DRHW_RASTER_CB364 = 0x026F, /* RasterOps ColorBoard 364 */
+ NUBUS_DRHW_RDIUS_DCGX = 0x027C, /* Radius DirectColor/GX */
+ NUBUS_DRHW_RDIUS_PC8 = 0x0291, /* Radius PrecisionColor 8 */
+ NUBUS_DRHW_LAPIS_PCS8 = 0x0292, /* Lapis ProColorServer 8 */
+ NUBUS_DRHW_RASTER_24XLI = 0x02A0, /* RasterOps 8/24 XLi */
+ NUBUS_DRHW_RASTER_PBPGT = 0x02A5, /* RasterOps PaintBoard Prism GT */
+ NUBUS_DRHW_EMACH_FSX = 0x02AE, /* E-Machines Futura SX */
+ NUBUS_DRHW_RASTER_24XLTV = 0x02B7, /* RasterOps 24XLTV */
+ NUBUS_DRHW_SMAC_THUND24 = 0x02CB, /* SuperMac Thunder/24 */
+ NUBUS_DRHW_SMAC_THUNDLGHT = 0x03D9, /* SuperMac ThunderLight */
+ NUBUS_DRHW_RDIUS_PC24XP = 0x0406, /* Radius PrecisionColor 24Xp */
+ NUBUS_DRHW_RDIUS_PC24X = 0x040A, /* Radius PrecisionColor 24X */
+ NUBUS_DRHW_RDIUS_PC8XJ = 0x040B, /* Radius PrecisionColor 8XJ */
+
+ /* NUBUS_CAT_NETWORK */
+ NUBUS_DRHW_INTERLAN = 0x0100,
+ NUBUS_DRHW_SMC9194 = 0x0101,
+ NUBUS_DRHW_KINETICS = 0x0106,
+ NUBUS_DRHW_CABLETRON = 0x0109,
+ NUBUS_DRHW_ASANTE_LC = 0x010f,
+ NUBUS_DRHW_SONIC = 0x0110,
+ NUBUS_DRHW_TECHWORKS = 0x0112,
+ NUBUS_DRHW_APPLE_SONIC_NB = 0x0118,
+ NUBUS_DRHW_APPLE_SONIC_LC = 0x0119,
+ NUBUS_DRHW_FOCUS = 0x011c,
+ NUBUS_DRHW_SONNET = 0x011d,
+};
+
+/* Resource IDs: These are the identifiers for the various weird and
+ wonderful tidbits of information that may or may not reside in the
+ NuBus ROM directory. */
+enum nubus_res_id {
+ NUBUS_RESID_TYPE = 0x0001,
+ NUBUS_RESID_NAME = 0x0002,
+ NUBUS_RESID_ICON = 0x0003,
+ NUBUS_RESID_DRVRDIR = 0x0004,
+ NUBUS_RESID_LOADREC = 0x0005,
+ NUBUS_RESID_BOOTREC = 0x0006,
+ NUBUS_RESID_FLAGS = 0x0007,
+ NUBUS_RESID_HWDEVID = 0x0008,
+ NUBUS_RESID_MINOR_BASEOS = 0x000a,
+ NUBUS_RESID_MINOR_LENGTH = 0x000b,
+ NUBUS_RESID_MAJOR_BASEOS = 0x000c,
+ NUBUS_RESID_MAJOR_LENGTH = 0x000d,
+ NUBUS_RESID_CICN = 0x000f,
+ NUBUS_RESID_ICL8 = 0x0010,
+ NUBUS_RESID_ICL4 = 0x0011,
+};
+
+/* Category-specific resources. */
+enum nubus_board_res_id {
+ NUBUS_RESID_BOARDID = 0x0020,
+ NUBUS_RESID_PRAMINITDATA = 0x0021,
+ NUBUS_RESID_PRIMARYINIT = 0x0022,
+ NUBUS_RESID_TIMEOUTCONST = 0x0023,
+ NUBUS_RESID_VENDORINFO = 0x0024,
+ NUBUS_RESID_BOARDFLAGS = 0x0025,
+ NUBUS_RESID_SECONDINIT = 0x0026,
+
+ /* Not sure why Apple put these next two in here */
+ NUBUS_RESID_VIDNAMES = 0x0041,
+ NUBUS_RESID_VIDMODES = 0x007e
+};
+
+/* Fields within the vendor info directory */
+enum nubus_vendor_res_id {
+ NUBUS_RESID_VEND_ID = 0x0001,
+ NUBUS_RESID_VEND_SERIAL = 0x0002,
+ NUBUS_RESID_VEND_REV = 0x0003,
+ NUBUS_RESID_VEND_PART = 0x0004,
+ NUBUS_RESID_VEND_DATE = 0x0005
+};
+
+enum nubus_net_res_id {
+ NUBUS_RESID_MAC_ADDRESS = 0x0080
+};
+
+enum nubus_cpu_res_id {
+ NUBUS_RESID_MEMINFO = 0x0081,
+ NUBUS_RESID_ROMINFO = 0x0082
+};
+
+enum nubus_display_res_id {
+ NUBUS_RESID_GAMMADIR = 0x0040,
+ NUBUS_RESID_FIRSTMODE = 0x0080,
+ NUBUS_RESID_SECONDMODE = 0x0081,
+ NUBUS_RESID_THIRDMODE = 0x0082,
+ NUBUS_RESID_FOURTHMODE = 0x0083,
+ NUBUS_RESID_FIFTHMODE = 0x0084,
+ NUBUS_RESID_SIXTHMODE = 0x0085
+};
+
+struct nubus_dir
+{
+ unsigned char *base;
+ unsigned char *ptr;
+ int done;
+ int mask;
+};
+
+struct nubus_dirent
+{
+ unsigned char *base;
+ unsigned char type;
+ __u32 data; /* Actually 24bits used */
+ int mask;
+};
+
+
+/* We'd like to get rid of this eventually. Only daynaport.c uses it now. */
+static inline void *nubus_slot_addr(int slot)
+{
+ return (void *)(0xF0000000|(slot<<24));
+}
+
+#endif /* _UAPILINUX_NUBUS_H */
diff --git a/include/uapi/linux/nvram.h b/include/uapi/linux/nvram.h
new file mode 100644
index 0000000..0986c43
--- /dev/null
+++ b/include/uapi/linux/nvram.h
@@ -0,0 +1,16 @@
+#ifndef _UAPI_LINUX_NVRAM_H
+#define _UAPI_LINUX_NVRAM_H
+
+#include <linux/ioctl.h>
+
+/* /dev/nvram ioctls */
+#define NVRAM_INIT _IO('p', 0x40) /* initialize NVRAM and set checksum */
+#define NVRAM_SETCKS _IO('p', 0x41) /* recalculate checksum */
+
+/* for all current systems, this is where NVRAM starts */
+#define NVRAM_FIRST_BYTE 14
+/* all these functions expect an NVRAM offset, not an absolute */
+#define NVRAM_OFFSET(x) ((x)-NVRAM_FIRST_BYTE)
+
+
+#endif /* _UAPI_LINUX_NVRAM_H */
diff --git a/include/linux/omap3isp.h b/include/uapi/linux/omap3isp.h
similarity index 100%
rename from include/linux/omap3isp.h
rename to include/uapi/linux/omap3isp.h
diff --git a/include/uapi/linux/omapfb.h b/include/uapi/linux/omapfb.h
new file mode 100644
index 0000000..7c97bc0
--- /dev/null
+++ b/include/uapi/linux/omapfb.h
@@ -0,0 +1,222 @@
+/*
+ * File: include/linux/omapfb.h
+ *
+ * Framebuffer driver for TI OMAP boards
+ *
+ * Copyright (C) 2004 Nokia Corporation
+ * Author: Imre Deak <imre.deak@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef _UAPI__LINUX_OMAPFB_H__
+#define _UAPI__LINUX_OMAPFB_H__
+
+#include <linux/fb.h>
+#include <linux/ioctl.h>
+#include <linux/types.h>
+
+/* IOCTL commands. */
+
+#define OMAP_IOW(num, dtype) _IOW('O', num, dtype)
+#define OMAP_IOR(num, dtype) _IOR('O', num, dtype)
+#define OMAP_IOWR(num, dtype) _IOWR('O', num, dtype)
+#define OMAP_IO(num) _IO('O', num)
+
+#define OMAPFB_MIRROR OMAP_IOW(31, int)
+#define OMAPFB_SYNC_GFX OMAP_IO(37)
+#define OMAPFB_VSYNC OMAP_IO(38)
+#define OMAPFB_SET_UPDATE_MODE OMAP_IOW(40, int)
+#define OMAPFB_GET_CAPS OMAP_IOR(42, struct omapfb_caps)
+#define OMAPFB_GET_UPDATE_MODE OMAP_IOW(43, int)
+#define OMAPFB_LCD_TEST OMAP_IOW(45, int)
+#define OMAPFB_CTRL_TEST OMAP_IOW(46, int)
+#define OMAPFB_UPDATE_WINDOW_OLD OMAP_IOW(47, struct omapfb_update_window_old)
+#define OMAPFB_SET_COLOR_KEY OMAP_IOW(50, struct omapfb_color_key)
+#define OMAPFB_GET_COLOR_KEY OMAP_IOW(51, struct omapfb_color_key)
+#define OMAPFB_SETUP_PLANE OMAP_IOW(52, struct omapfb_plane_info)
+#define OMAPFB_QUERY_PLANE OMAP_IOW(53, struct omapfb_plane_info)
+#define OMAPFB_UPDATE_WINDOW OMAP_IOW(54, struct omapfb_update_window)
+#define OMAPFB_SETUP_MEM OMAP_IOW(55, struct omapfb_mem_info)
+#define OMAPFB_QUERY_MEM OMAP_IOW(56, struct omapfb_mem_info)
+#define OMAPFB_WAITFORVSYNC OMAP_IO(57)
+#define OMAPFB_MEMORY_READ OMAP_IOR(58, struct omapfb_memory_read)
+#define OMAPFB_GET_OVERLAY_COLORMODE OMAP_IOR(59, struct omapfb_ovl_colormode)
+#define OMAPFB_WAITFORGO OMAP_IO(60)
+#define OMAPFB_GET_VRAM_INFO OMAP_IOR(61, struct omapfb_vram_info)
+#define OMAPFB_SET_TEARSYNC OMAP_IOW(62, struct omapfb_tearsync_info)
+#define OMAPFB_GET_DISPLAY_INFO OMAP_IOR(63, struct omapfb_display_info)
+
+#define OMAPFB_CAPS_GENERIC_MASK 0x00000fff
+#define OMAPFB_CAPS_LCDC_MASK 0x00fff000
+#define OMAPFB_CAPS_PANEL_MASK 0xff000000
+
+#define OMAPFB_CAPS_MANUAL_UPDATE 0x00001000
+#define OMAPFB_CAPS_TEARSYNC 0x00002000
+#define OMAPFB_CAPS_PLANE_RELOCATE_MEM 0x00004000
+#define OMAPFB_CAPS_PLANE_SCALE 0x00008000
+#define OMAPFB_CAPS_WINDOW_PIXEL_DOUBLE 0x00010000
+#define OMAPFB_CAPS_WINDOW_SCALE 0x00020000
+#define OMAPFB_CAPS_WINDOW_OVERLAY 0x00040000
+#define OMAPFB_CAPS_WINDOW_ROTATE 0x00080000
+#define OMAPFB_CAPS_SET_BACKLIGHT 0x01000000
+
+/* Values from DSP must map to lower 16-bits */
+#define OMAPFB_FORMAT_MASK 0x00ff
+#define OMAPFB_FORMAT_FLAG_DOUBLE 0x0100
+#define OMAPFB_FORMAT_FLAG_TEARSYNC 0x0200
+#define OMAPFB_FORMAT_FLAG_FORCE_VSYNC 0x0400
+#define OMAPFB_FORMAT_FLAG_ENABLE_OVERLAY 0x0800
+#define OMAPFB_FORMAT_FLAG_DISABLE_OVERLAY 0x1000
+
+#define OMAPFB_MEMTYPE_SDRAM 0
+#define OMAPFB_MEMTYPE_SRAM 1
+#define OMAPFB_MEMTYPE_MAX 1
+
+#define OMAPFB_MEM_IDX_ENABLED 0x80
+#define OMAPFB_MEM_IDX_MASK 0x7f
+
+enum omapfb_color_format {
+ OMAPFB_COLOR_RGB565 = 0,
+ OMAPFB_COLOR_YUV422,
+ OMAPFB_COLOR_YUV420,
+ OMAPFB_COLOR_CLUT_8BPP,
+ OMAPFB_COLOR_CLUT_4BPP,
+ OMAPFB_COLOR_CLUT_2BPP,
+ OMAPFB_COLOR_CLUT_1BPP,
+ OMAPFB_COLOR_RGB444,
+ OMAPFB_COLOR_YUY422,
+
+ OMAPFB_COLOR_ARGB16,
+ OMAPFB_COLOR_RGB24U, /* RGB24, 32-bit container */
+ OMAPFB_COLOR_RGB24P, /* RGB24, 24-bit container */
+ OMAPFB_COLOR_ARGB32,
+ OMAPFB_COLOR_RGBA32,
+ OMAPFB_COLOR_RGBX32,
+};
+
+struct omapfb_update_window {
+ __u32 x, y;
+ __u32 width, height;
+ __u32 format;
+ __u32 out_x, out_y;
+ __u32 out_width, out_height;
+ __u32 reserved[8];
+};
+
+struct omapfb_update_window_old {
+ __u32 x, y;
+ __u32 width, height;
+ __u32 format;
+};
+
+enum omapfb_plane {
+ OMAPFB_PLANE_GFX = 0,
+ OMAPFB_PLANE_VID1,
+ OMAPFB_PLANE_VID2,
+};
+
+enum omapfb_channel_out {
+ OMAPFB_CHANNEL_OUT_LCD = 0,
+ OMAPFB_CHANNEL_OUT_DIGIT,
+};
+
+struct omapfb_plane_info {
+ __u32 pos_x;
+ __u32 pos_y;
+ __u8 enabled;
+ __u8 channel_out;
+ __u8 mirror;
+ __u8 mem_idx;
+ __u32 out_width;
+ __u32 out_height;
+ __u32 reserved2[12];
+};
+
+struct omapfb_mem_info {
+ __u32 size;
+ __u8 type;
+ __u8 reserved[3];
+};
+
+struct omapfb_caps {
+ __u32 ctrl;
+ __u32 plane_color;
+ __u32 wnd_color;
+};
+
+enum omapfb_color_key_type {
+ OMAPFB_COLOR_KEY_DISABLED = 0,
+ OMAPFB_COLOR_KEY_GFX_DST,
+ OMAPFB_COLOR_KEY_VID_SRC,
+};
+
+struct omapfb_color_key {
+ __u8 channel_out;
+ __u32 background;
+ __u32 trans_key;
+ __u8 key_type;
+};
+
+enum omapfb_update_mode {
+ OMAPFB_UPDATE_DISABLED = 0,
+ OMAPFB_AUTO_UPDATE,
+ OMAPFB_MANUAL_UPDATE
+};
+
+struct omapfb_memory_read {
+ __u16 x;
+ __u16 y;
+ __u16 w;
+ __u16 h;
+ size_t buffer_size;
+ void __user *buffer;
+};
+
+struct omapfb_ovl_colormode {
+ __u8 overlay_idx;
+ __u8 mode_idx;
+ __u32 bits_per_pixel;
+ __u32 nonstd;
+ struct fb_bitfield red;
+ struct fb_bitfield green;
+ struct fb_bitfield blue;
+ struct fb_bitfield transp;
+};
+
+struct omapfb_vram_info {
+ __u32 total;
+ __u32 free;
+ __u32 largest_free_block;
+ __u32 reserved[5];
+};
+
+struct omapfb_tearsync_info {
+ __u8 enabled;
+ __u8 reserved1[3];
+ __u16 line;
+ __u16 reserved2;
+};
+
+struct omapfb_display_info {
+ __u16 xres;
+ __u16 yres;
+ __u32 width; /* phys width of the display in micrometers */
+ __u32 height; /* phys height of the display in micrometers */
+ __u32 reserved[5];
+};
+
+
+#endif /* _UAPI__LINUX_OMAPFB_H__ */
diff --git a/include/uapi/linux/oom.h b/include/uapi/linux/oom.h
new file mode 100644
index 0000000..a49c4af
--- /dev/null
+++ b/include/uapi/linux/oom.h
@@ -0,0 +1,11 @@
+#ifndef _UAPI__INCLUDE_LINUX_OOM_H
+#define _UAPI__INCLUDE_LINUX_OOM_H
+
+/*
+ * /proc/<pid>/oom_score_adj set to OOM_SCORE_ADJ_MIN disables oom killing for
+ * pid.
+ */
+#define OOM_SCORE_ADJ_MIN (-1000)
+#define OOM_SCORE_ADJ_MAX 1000
+
+#endif /* _UAPI__INCLUDE_LINUX_OOM_H */
diff --git a/include/linux/packet_diag.h b/include/uapi/linux/packet_diag.h
similarity index 100%
rename from include/linux/packet_diag.h
rename to include/uapi/linux/packet_diag.h
diff --git a/include/linux/param.h b/include/uapi/linux/param.h
similarity index 100%
rename from include/linux/param.h
rename to include/uapi/linux/param.h
diff --git a/include/uapi/linux/parport.h b/include/uapi/linux/parport.h
new file mode 100644
index 0000000..f41388f
--- /dev/null
+++ b/include/uapi/linux/parport.h
@@ -0,0 +1,95 @@
+/*
+ * Any part of this program may be used in documents licensed under
+ * the GNU Free Documentation License, Version 1.1 or any later version
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _UAPI_PARPORT_H_
+#define _UAPI_PARPORT_H_
+
+/* Start off with user-visible constants */
+
+/* Maximum of 16 ports per machine */
+#define PARPORT_MAX 16
+
+/* Magic numbers */
+#define PARPORT_IRQ_NONE -1
+#define PARPORT_DMA_NONE -1
+#define PARPORT_IRQ_AUTO -2
+#define PARPORT_DMA_AUTO -2
+#define PARPORT_DMA_NOFIFO -3
+#define PARPORT_DISABLE -2
+#define PARPORT_IRQ_PROBEONLY -3
+#define PARPORT_IOHI_AUTO -1
+
+#define PARPORT_CONTROL_STROBE 0x1
+#define PARPORT_CONTROL_AUTOFD 0x2
+#define PARPORT_CONTROL_INIT 0x4
+#define PARPORT_CONTROL_SELECT 0x8
+
+#define PARPORT_STATUS_ERROR 0x8
+#define PARPORT_STATUS_SELECT 0x10
+#define PARPORT_STATUS_PAPEROUT 0x20
+#define PARPORT_STATUS_ACK 0x40
+#define PARPORT_STATUS_BUSY 0x80
+
+/* Type classes for Plug-and-Play probe. */
+typedef enum {
+ PARPORT_CLASS_LEGACY = 0, /* Non-IEEE1284 device */
+ PARPORT_CLASS_PRINTER,
+ PARPORT_CLASS_MODEM,
+ PARPORT_CLASS_NET,
+ PARPORT_CLASS_HDC, /* Hard disk controller */
+ PARPORT_CLASS_PCMCIA,
+ PARPORT_CLASS_MEDIA, /* Multimedia device */
+ PARPORT_CLASS_FDC, /* Floppy disk controller */
+ PARPORT_CLASS_PORTS,
+ PARPORT_CLASS_SCANNER,
+ PARPORT_CLASS_DIGCAM,
+ PARPORT_CLASS_OTHER, /* Anything else */
+ PARPORT_CLASS_UNSPEC, /* No CLS field in ID */
+ PARPORT_CLASS_SCSIADAPTER
+} parport_device_class;
+
+/* The "modes" entry in parport is a bit field representing the
+ capabilities of the hardware. */
+#define PARPORT_MODE_PCSPP (1<<0) /* IBM PC registers available. */
+#define PARPORT_MODE_TRISTATE (1<<1) /* Can tristate. */
+#define PARPORT_MODE_EPP (1<<2) /* Hardware EPP. */
+#define PARPORT_MODE_ECP (1<<3) /* Hardware ECP. */
+#define PARPORT_MODE_COMPAT (1<<4) /* Hardware 'printer protocol'. */
+#define PARPORT_MODE_DMA (1<<5) /* Hardware can DMA. */
+#define PARPORT_MODE_SAFEININT (1<<6) /* SPP registers accessible in IRQ. */
+
+/* IEEE1284 modes:
+ Nibble mode, byte mode, ECP, ECPRLE and EPP are their own
+ 'extensibility request' values. Others are special.
+ 'Real' ECP modes must have the IEEE1284_MODE_ECP bit set. */
+#define IEEE1284_MODE_NIBBLE 0
+#define IEEE1284_MODE_BYTE (1<<0)
+#define IEEE1284_MODE_COMPAT (1<<8)
+#define IEEE1284_MODE_BECP (1<<9) /* Bounded ECP mode */
+#define IEEE1284_MODE_ECP (1<<4)
+#define IEEE1284_MODE_ECPRLE (IEEE1284_MODE_ECP | (1<<5))
+#define IEEE1284_MODE_ECPSWE (1<<10) /* Software-emulated */
+#define IEEE1284_MODE_EPP (1<<6)
+#define IEEE1284_MODE_EPPSL (1<<11) /* EPP 1.7 */
+#define IEEE1284_MODE_EPPSWE (1<<12) /* Software-emulated */
+#define IEEE1284_DEVICEID (1<<2) /* This is a flag */
+#define IEEE1284_EXT_LINK (1<<14) /* This flag causes the
+ * extensibility link to
+ * be requested, using
+ * bits 0-6. */
+
+/* For the benefit of parport_read/write, you can use these with
+ * parport_negotiate to use address operations. They have no effect
+ * other than to make parport_read/write use address transfers. */
+#define IEEE1284_ADDR (1<<13) /* This is a flag */
+#define IEEE1284_DATA 0 /* So is this */
+
+/* Flags for block transfer operations. */
+#define PARPORT_EPP_FAST (1<<0) /* Unreliable counts. */
+#define PARPORT_W91284PIC (1<<1) /* have a Warp9 w91284pic in the device */
+
+/* The rest is for the kernel only */
+#endif /* _UAPI_PARPORT_H_ */
diff --git a/include/uapi/linux/patchkey.h b/include/uapi/linux/patchkey.h
new file mode 100644
index 0000000..1bda0e5
--- /dev/null
+++ b/include/uapi/linux/patchkey.h
@@ -0,0 +1,37 @@
+/*
+ * <linux/patchkey.h> -- definition of _PATCHKEY macro
+ *
+ * Copyright (C) 2005 Stuart Brady
+ *
+ * This exists because awe_voice.h defined its own _PATCHKEY and it wasn't
+ * clear whether removing this would break anything in userspace.
+ *
+ * Do not include this file directly. Please use <sys/soundcard.h> instead.
+ * For kernel code, use <linux/soundcard.h>
+ */
+
+#ifndef _LINUX_PATCHKEY_H_INDIRECT
+#error "patchkey.h included directly"
+#endif
+
+#ifndef _UAPI_LINUX_PATCHKEY_H
+#define _UAPI_LINUX_PATCHKEY_H
+
+/* Endian macros. */
+#ifndef __KERNEL__
+# include <endian.h>
+#endif
+
+#if !defined(__KERNEL__)
+#if defined(__BYTE_ORDER)
+# if __BYTE_ORDER == __BIG_ENDIAN
+# define _PATCHKEY(id) (0xfd00|id)
+# elif __BYTE_ORDER == __LITTLE_ENDIAN
+# define _PATCHKEY(id) ((id<<8)|0x00fd)
+# else
+# error "could not determine byte order"
+# endif
+#endif
+#endif
+
+#endif /* _UAPI_LINUX_PATCHKEY_H */
diff --git a/include/uapi/linux/pci.h b/include/uapi/linux/pci.h
new file mode 100644
index 0000000..3c292bc0
--- /dev/null
+++ b/include/uapi/linux/pci.h
@@ -0,0 +1,41 @@
+/*
+ * pci.h
+ *
+ * PCI defines and function prototypes
+ * Copyright 1994, Drew Eckhardt
+ * Copyright 1997--1999 Martin Mares <mj@ucw.cz>
+ *
+ * For more information, please consult the following manuals (look at
+ * http://www.pcisig.com/ for how to get them):
+ *
+ * PCI BIOS Specification
+ * PCI Local Bus Specification
+ * PCI to PCI Bridge Specification
+ * PCI System Design Guide
+ */
+
+#ifndef _UAPILINUX_PCI_H
+#define _UAPILINUX_PCI_H
+
+#include <linux/pci_regs.h> /* The pci register defines */
+
+/*
+ * The PCI interface treats multi-function devices as independent
+ * devices. The slot/function address of each device is encoded
+ * in a single byte as follows:
+ *
+ * 7:3 = slot
+ * 2:0 = function
+ */
+#define PCI_DEVFN(slot, func) ((((slot) & 0x1f) << 3) | ((func) & 0x07))
+#define PCI_SLOT(devfn) (((devfn) >> 3) & 0x1f)
+#define PCI_FUNC(devfn) ((devfn) & 0x07)
+
+/* Ioctls for /proc/bus/pci/X/Y nodes. */
+#define PCIIOC_BASE ('P' << 24 | 'C' << 16 | 'I' << 8)
+#define PCIIOC_CONTROLLER (PCIIOC_BASE | 0x00) /* Get controller for PCI device. */
+#define PCIIOC_MMAP_IS_IO (PCIIOC_BASE | 0x01) /* Set mmap state to I/O space. */
+#define PCIIOC_MMAP_IS_MEM (PCIIOC_BASE | 0x02) /* Set mmap state to MEM space. */
+#define PCIIOC_WRITE_COMBINE (PCIIOC_BASE | 0x03) /* Enable/disable write-combining. */
+
+#endif /* _UAPILINUX_PCI_H */
diff --git a/include/linux/pci_regs.h b/include/uapi/linux/pci_regs.h
similarity index 100%
rename from include/linux/pci_regs.h
rename to include/uapi/linux/pci_regs.h
diff --git a/include/uapi/linux/perf_event.h b/include/uapi/linux/perf_event.h
new file mode 100644
index 0000000..4f63c05
--- /dev/null
+++ b/include/uapi/linux/perf_event.h
@@ -0,0 +1,615 @@
+/*
+ * Performance events:
+ *
+ * Copyright (C) 2008-2009, Thomas Gleixner <tglx@linutronix.de>
+ * Copyright (C) 2008-2011, Red Hat, Inc., Ingo Molnar
+ * Copyright (C) 2008-2011, Red Hat, Inc., Peter Zijlstra
+ *
+ * Data type definitions, declarations, prototypes.
+ *
+ * Started by: Thomas Gleixner and Ingo Molnar
+ *
+ * For licencing details see kernel-base/COPYING
+ */
+#ifndef _UAPI_LINUX_PERF_EVENT_H
+#define _UAPI_LINUX_PERF_EVENT_H
+
+#include <linux/types.h>
+#include <linux/ioctl.h>
+#include <asm/byteorder.h>
+
+/*
+ * User-space ABI bits:
+ */
+
+/*
+ * attr.type
+ */
+enum perf_type_id {
+ PERF_TYPE_HARDWARE = 0,
+ PERF_TYPE_SOFTWARE = 1,
+ PERF_TYPE_TRACEPOINT = 2,
+ PERF_TYPE_HW_CACHE = 3,
+ PERF_TYPE_RAW = 4,
+ PERF_TYPE_BREAKPOINT = 5,
+
+ PERF_TYPE_MAX, /* non-ABI */
+};
+
+/*
+ * Generalized performance event event_id types, used by the
+ * attr.event_id parameter of the sys_perf_event_open()
+ * syscall:
+ */
+enum perf_hw_id {
+ /*
+ * Common hardware events, generalized by the kernel:
+ */
+ PERF_COUNT_HW_CPU_CYCLES = 0,
+ PERF_COUNT_HW_INSTRUCTIONS = 1,
+ PERF_COUNT_HW_CACHE_REFERENCES = 2,
+ PERF_COUNT_HW_CACHE_MISSES = 3,
+ PERF_COUNT_HW_BRANCH_INSTRUCTIONS = 4,
+ PERF_COUNT_HW_BRANCH_MISSES = 5,
+ PERF_COUNT_HW_BUS_CYCLES = 6,
+ PERF_COUNT_HW_STALLED_CYCLES_FRONTEND = 7,
+ PERF_COUNT_HW_STALLED_CYCLES_BACKEND = 8,
+ PERF_COUNT_HW_REF_CPU_CYCLES = 9,
+
+ PERF_COUNT_HW_MAX, /* non-ABI */
+};
+
+/*
+ * Generalized hardware cache events:
+ *
+ * { L1-D, L1-I, LLC, ITLB, DTLB, BPU, NODE } x
+ * { read, write, prefetch } x
+ * { accesses, misses }
+ */
+enum perf_hw_cache_id {
+ PERF_COUNT_HW_CACHE_L1D = 0,
+ PERF_COUNT_HW_CACHE_L1I = 1,
+ PERF_COUNT_HW_CACHE_LL = 2,
+ PERF_COUNT_HW_CACHE_DTLB = 3,
+ PERF_COUNT_HW_CACHE_ITLB = 4,
+ PERF_COUNT_HW_CACHE_BPU = 5,
+ PERF_COUNT_HW_CACHE_NODE = 6,
+
+ PERF_COUNT_HW_CACHE_MAX, /* non-ABI */
+};
+
+enum perf_hw_cache_op_id {
+ PERF_COUNT_HW_CACHE_OP_READ = 0,
+ PERF_COUNT_HW_CACHE_OP_WRITE = 1,
+ PERF_COUNT_HW_CACHE_OP_PREFETCH = 2,
+
+ PERF_COUNT_HW_CACHE_OP_MAX, /* non-ABI */
+};
+
+enum perf_hw_cache_op_result_id {
+ PERF_COUNT_HW_CACHE_RESULT_ACCESS = 0,
+ PERF_COUNT_HW_CACHE_RESULT_MISS = 1,
+
+ PERF_COUNT_HW_CACHE_RESULT_MAX, /* non-ABI */
+};
+
+/*
+ * Special "software" events provided by the kernel, even if the hardware
+ * does not support performance events. These events measure various
+ * physical and sw events of the kernel (and allow the profiling of them as
+ * well):
+ */
+enum perf_sw_ids {
+ PERF_COUNT_SW_CPU_CLOCK = 0,
+ PERF_COUNT_SW_TASK_CLOCK = 1,
+ PERF_COUNT_SW_PAGE_FAULTS = 2,
+ PERF_COUNT_SW_CONTEXT_SWITCHES = 3,
+ PERF_COUNT_SW_CPU_MIGRATIONS = 4,
+ PERF_COUNT_SW_PAGE_FAULTS_MIN = 5,
+ PERF_COUNT_SW_PAGE_FAULTS_MAJ = 6,
+ PERF_COUNT_SW_ALIGNMENT_FAULTS = 7,
+ PERF_COUNT_SW_EMULATION_FAULTS = 8,
+
+ PERF_COUNT_SW_MAX, /* non-ABI */
+};
+
+/*
+ * Bits that can be set in attr.sample_type to request information
+ * in the overflow packets.
+ */
+enum perf_event_sample_format {
+ PERF_SAMPLE_IP = 1U << 0,
+ PERF_SAMPLE_TID = 1U << 1,
+ PERF_SAMPLE_TIME = 1U << 2,
+ PERF_SAMPLE_ADDR = 1U << 3,
+ PERF_SAMPLE_READ = 1U << 4,
+ PERF_SAMPLE_CALLCHAIN = 1U << 5,
+ PERF_SAMPLE_ID = 1U << 6,
+ PERF_SAMPLE_CPU = 1U << 7,
+ PERF_SAMPLE_PERIOD = 1U << 8,
+ PERF_SAMPLE_STREAM_ID = 1U << 9,
+ PERF_SAMPLE_RAW = 1U << 10,
+ PERF_SAMPLE_BRANCH_STACK = 1U << 11,
+ PERF_SAMPLE_REGS_USER = 1U << 12,
+ PERF_SAMPLE_STACK_USER = 1U << 13,
+
+ PERF_SAMPLE_MAX = 1U << 14, /* non-ABI */
+};
+
+/*
+ * values to program into branch_sample_type when PERF_SAMPLE_BRANCH is set
+ *
+ * If the user does not pass priv level information via branch_sample_type,
+ * the kernel uses the event's priv level. Branch and event priv levels do
+ * not have to match. Branch priv level is checked for permissions.
+ *
+ * The branch types can be combined, however BRANCH_ANY covers all types
+ * of branches and therefore it supersedes all the other types.
+ */
+enum perf_branch_sample_type {
+ PERF_SAMPLE_BRANCH_USER = 1U << 0, /* user branches */
+ PERF_SAMPLE_BRANCH_KERNEL = 1U << 1, /* kernel branches */
+ PERF_SAMPLE_BRANCH_HV = 1U << 2, /* hypervisor branches */
+
+ PERF_SAMPLE_BRANCH_ANY = 1U << 3, /* any branch types */
+ PERF_SAMPLE_BRANCH_ANY_CALL = 1U << 4, /* any call branch */
+ PERF_SAMPLE_BRANCH_ANY_RETURN = 1U << 5, /* any return branch */
+ PERF_SAMPLE_BRANCH_IND_CALL = 1U << 6, /* indirect calls */
+
+ PERF_SAMPLE_BRANCH_MAX = 1U << 7, /* non-ABI */
+};
+
+#define PERF_SAMPLE_BRANCH_PLM_ALL \
+ (PERF_SAMPLE_BRANCH_USER|\
+ PERF_SAMPLE_BRANCH_KERNEL|\
+ PERF_SAMPLE_BRANCH_HV)
+
+/*
+ * Values to determine ABI of the registers dump.
+ */
+enum perf_sample_regs_abi {
+ PERF_SAMPLE_REGS_ABI_NONE = 0,
+ PERF_SAMPLE_REGS_ABI_32 = 1,
+ PERF_SAMPLE_REGS_ABI_64 = 2,
+};
+
+/*
+ * The format of the data returned by read() on a perf event fd,
+ * as specified by attr.read_format:
+ *
+ * struct read_format {
+ * { u64 value;
+ * { u64 time_enabled; } && PERF_FORMAT_TOTAL_TIME_ENABLED
+ * { u64 time_running; } && PERF_FORMAT_TOTAL_TIME_RUNNING
+ * { u64 id; } && PERF_FORMAT_ID
+ * } && !PERF_FORMAT_GROUP
+ *
+ * { u64 nr;
+ * { u64 time_enabled; } && PERF_FORMAT_TOTAL_TIME_ENABLED
+ * { u64 time_running; } && PERF_FORMAT_TOTAL_TIME_RUNNING
+ * { u64 value;
+ * { u64 id; } && PERF_FORMAT_ID
+ * } cntr[nr];
+ * } && PERF_FORMAT_GROUP
+ * };
+ */
+enum perf_event_read_format {
+ PERF_FORMAT_TOTAL_TIME_ENABLED = 1U << 0,
+ PERF_FORMAT_TOTAL_TIME_RUNNING = 1U << 1,
+ PERF_FORMAT_ID = 1U << 2,
+ PERF_FORMAT_GROUP = 1U << 3,
+
+ PERF_FORMAT_MAX = 1U << 4, /* non-ABI */
+};
+
+#define PERF_ATTR_SIZE_VER0 64 /* sizeof first published struct */
+#define PERF_ATTR_SIZE_VER1 72 /* add: config2 */
+#define PERF_ATTR_SIZE_VER2 80 /* add: branch_sample_type */
+#define PERF_ATTR_SIZE_VER3 96 /* add: sample_regs_user */
+ /* add: sample_stack_user */
+
+/*
+ * Hardware event_id to monitor via a performance monitoring event:
+ */
+struct perf_event_attr {
+
+ /*
+ * Major type: hardware/software/tracepoint/etc.
+ */
+ __u32 type;
+
+ /*
+ * Size of the attr structure, for fwd/bwd compat.
+ */
+ __u32 size;
+
+ /*
+ * Type specific configuration information.
+ */
+ __u64 config;
+
+ union {
+ __u64 sample_period;
+ __u64 sample_freq;
+ };
+
+ __u64 sample_type;
+ __u64 read_format;
+
+ __u64 disabled : 1, /* off by default */
+ inherit : 1, /* children inherit it */
+ pinned : 1, /* must always be on PMU */
+ exclusive : 1, /* only group on PMU */
+ exclude_user : 1, /* don't count user */
+ exclude_kernel : 1, /* ditto kernel */
+ exclude_hv : 1, /* ditto hypervisor */
+ exclude_idle : 1, /* don't count when idle */
+ mmap : 1, /* include mmap data */
+ comm : 1, /* include comm data */
+ freq : 1, /* use freq, not period */
+ inherit_stat : 1, /* per task counts */
+ enable_on_exec : 1, /* next exec enables */
+ task : 1, /* trace fork/exit */
+ watermark : 1, /* wakeup_watermark */
+ /*
+ * precise_ip:
+ *
+ * 0 - SAMPLE_IP can have arbitrary skid
+ * 1 - SAMPLE_IP must have constant skid
+ * 2 - SAMPLE_IP requested to have 0 skid
+ * 3 - SAMPLE_IP must have 0 skid
+ *
+ * See also PERF_RECORD_MISC_EXACT_IP
+ */
+ precise_ip : 2, /* skid constraint */
+ mmap_data : 1, /* non-exec mmap data */
+ sample_id_all : 1, /* sample_type all events */
+
+ exclude_host : 1, /* don't count in host */
+ exclude_guest : 1, /* don't count in guest */
+
+ exclude_callchain_kernel : 1, /* exclude kernel callchains */
+ exclude_callchain_user : 1, /* exclude user callchains */
+
+ __reserved_1 : 41;
+
+ union {
+ __u32 wakeup_events; /* wakeup every n events */
+ __u32 wakeup_watermark; /* bytes before wakeup */
+ };
+
+ __u32 bp_type;
+ union {
+ __u64 bp_addr;
+ __u64 config1; /* extension of config */
+ };
+ union {
+ __u64 bp_len;
+ __u64 config2; /* extension of config1 */
+ };
+ __u64 branch_sample_type; /* enum perf_branch_sample_type */
+
+ /*
+ * Defines set of user regs to dump on samples.
+ * See asm/perf_regs.h for details.
+ */
+ __u64 sample_regs_user;
+
+ /*
+ * Defines size of the user stack to dump on samples.
+ */
+ __u32 sample_stack_user;
+
+ /* Align to u64. */
+ __u32 __reserved_2;
+};
+
+#define perf_flags(attr) (*(&(attr)->read_format + 1))
+
+/*
+ * Ioctls that can be done on a perf event fd:
+ */
+#define PERF_EVENT_IOC_ENABLE _IO ('$', 0)
+#define PERF_EVENT_IOC_DISABLE _IO ('$', 1)
+#define PERF_EVENT_IOC_REFRESH _IO ('$', 2)
+#define PERF_EVENT_IOC_RESET _IO ('$', 3)
+#define PERF_EVENT_IOC_PERIOD _IOW('$', 4, __u64)
+#define PERF_EVENT_IOC_SET_OUTPUT _IO ('$', 5)
+#define PERF_EVENT_IOC_SET_FILTER _IOW('$', 6, char *)
+
+enum perf_event_ioc_flags {
+ PERF_IOC_FLAG_GROUP = 1U << 0,
+};
+
+/*
+ * Structure of the page that can be mapped via mmap
+ */
+struct perf_event_mmap_page {
+ __u32 version; /* version number of this structure */
+ __u32 compat_version; /* lowest version this is compat with */
+
+ /*
+ * Bits needed to read the hw events in user-space.
+ *
+ * u32 seq, time_mult, time_shift, idx, width;
+ * u64 count, enabled, running;
+ * u64 cyc, time_offset;
+ * s64 pmc = 0;
+ *
+ * do {
+ * seq = pc->lock;
+ * barrier()
+ *
+ * enabled = pc->time_enabled;
+ * running = pc->time_running;
+ *
+ * if (pc->cap_usr_time && enabled != running) {
+ * cyc = rdtsc();
+ * time_offset = pc->time_offset;
+ * time_mult = pc->time_mult;
+ * time_shift = pc->time_shift;
+ * }
+ *
+ * idx = pc->index;
+ * count = pc->offset;
+ * if (pc->cap_usr_rdpmc && idx) {
+ * width = pc->pmc_width;
+ * pmc = rdpmc(idx - 1);
+ * }
+ *
+ * barrier();
+ * } while (pc->lock != seq);
+ *
+ * NOTE: for obvious reason this only works on self-monitoring
+ * processes.
+ */
+ __u32 lock; /* seqlock for synchronization */
+ __u32 index; /* hardware event identifier */
+ __s64 offset; /* add to hardware event value */
+ __u64 time_enabled; /* time event active */
+ __u64 time_running; /* time event on cpu */
+ union {
+ __u64 capabilities;
+ __u64 cap_usr_time : 1,
+ cap_usr_rdpmc : 1,
+ cap_____res : 62;
+ };
+
+ /*
+ * If cap_usr_rdpmc this field provides the bit-width of the value
+ * read using the rdpmc() or equivalent instruction. This can be used
+ * to sign extend the result like:
+ *
+ * pmc <<= 64 - width;
+ * pmc >>= 64 - width; // signed shift right
+ * count += pmc;
+ */
+ __u16 pmc_width;
+
+ /*
+ * If cap_usr_time the below fields can be used to compute the time
+ * delta since time_enabled (in ns) using rdtsc or similar.
+ *
+ * u64 quot, rem;
+ * u64 delta;
+ *
+ * quot = (cyc >> time_shift);
+ * rem = cyc & ((1 << time_shift) - 1);
+ * delta = time_offset + quot * time_mult +
+ * ((rem * time_mult) >> time_shift);
+ *
+ * Where time_offset,time_mult,time_shift and cyc are read in the
+ * seqcount loop described above. This delta can then be added to
+ * enabled and possible running (if idx), improving the scaling:
+ *
+ * enabled += delta;
+ * if (idx)
+ * running += delta;
+ *
+ * quot = count / running;
+ * rem = count % running;
+ * count = quot * enabled + (rem * enabled) / running;
+ */
+ __u16 time_shift;
+ __u32 time_mult;
+ __u64 time_offset;
+
+ /*
+ * Hole for extension of the self monitor capabilities
+ */
+
+ __u64 __reserved[120]; /* align to 1k */
+
+ /*
+ * Control data for the mmap() data buffer.
+ *
+ * User-space reading the @data_head value should issue an rmb(), on
+ * SMP capable platforms, after reading this value -- see
+ * perf_event_wakeup().
+ *
+ * When the mapping is PROT_WRITE the @data_tail value should be
+ * written by userspace to reflect the last read data. In this case
+ * the kernel will not over-write unread data.
+ */
+ __u64 data_head; /* head in the data section */
+ __u64 data_tail; /* user-space written tail */
+};
+
+#define PERF_RECORD_MISC_CPUMODE_MASK (7 << 0)
+#define PERF_RECORD_MISC_CPUMODE_UNKNOWN (0 << 0)
+#define PERF_RECORD_MISC_KERNEL (1 << 0)
+#define PERF_RECORD_MISC_USER (2 << 0)
+#define PERF_RECORD_MISC_HYPERVISOR (3 << 0)
+#define PERF_RECORD_MISC_GUEST_KERNEL (4 << 0)
+#define PERF_RECORD_MISC_GUEST_USER (5 << 0)
+
+/*
+ * Indicates that the content of PERF_SAMPLE_IP points to
+ * the actual instruction that triggered the event. See also
+ * perf_event_attr::precise_ip.
+ */
+#define PERF_RECORD_MISC_EXACT_IP (1 << 14)
+/*
+ * Reserve the last bit to indicate some extended misc field
+ */
+#define PERF_RECORD_MISC_EXT_RESERVED (1 << 15)
+
+struct perf_event_header {
+ __u32 type;
+ __u16 misc;
+ __u16 size;
+};
+
+enum perf_event_type {
+
+ /*
+ * If perf_event_attr.sample_id_all is set then all event types will
+ * have the sample_type selected fields related to where/when
+ * (identity) an event took place (TID, TIME, ID, CPU, STREAM_ID)
+ * described in PERF_RECORD_SAMPLE below, it will be stashed just after
+ * the perf_event_header and the fields already present for the existing
+ * fields, i.e. at the end of the payload. That way a newer perf.data
+ * file will be supported by older perf tools, with these new optional
+ * fields being ignored.
+ *
+ * The MMAP events record the PROT_EXEC mappings so that we can
+ * correlate userspace IPs to code. They have the following structure:
+ *
+ * struct {
+ * struct perf_event_header header;
+ *
+ * u32 pid, tid;
+ * u64 addr;
+ * u64 len;
+ * u64 pgoff;
+ * char filename[];
+ * };
+ */
+ PERF_RECORD_MMAP = 1,
+
+ /*
+ * struct {
+ * struct perf_event_header header;
+ * u64 id;
+ * u64 lost;
+ * };
+ */
+ PERF_RECORD_LOST = 2,
+
+ /*
+ * struct {
+ * struct perf_event_header header;
+ *
+ * u32 pid, tid;
+ * char comm[];
+ * };
+ */
+ PERF_RECORD_COMM = 3,
+
+ /*
+ * struct {
+ * struct perf_event_header header;
+ * u32 pid, ppid;
+ * u32 tid, ptid;
+ * u64 time;
+ * };
+ */
+ PERF_RECORD_EXIT = 4,
+
+ /*
+ * struct {
+ * struct perf_event_header header;
+ * u64 time;
+ * u64 id;
+ * u64 stream_id;
+ * };
+ */
+ PERF_RECORD_THROTTLE = 5,
+ PERF_RECORD_UNTHROTTLE = 6,
+
+ /*
+ * struct {
+ * struct perf_event_header header;
+ * u32 pid, ppid;
+ * u32 tid, ptid;
+ * u64 time;
+ * };
+ */
+ PERF_RECORD_FORK = 7,
+
+ /*
+ * struct {
+ * struct perf_event_header header;
+ * u32 pid, tid;
+ *
+ * struct read_format values;
+ * };
+ */
+ PERF_RECORD_READ = 8,
+
+ /*
+ * struct {
+ * struct perf_event_header header;
+ *
+ * { u64 ip; } && PERF_SAMPLE_IP
+ * { u32 pid, tid; } && PERF_SAMPLE_TID
+ * { u64 time; } && PERF_SAMPLE_TIME
+ * { u64 addr; } && PERF_SAMPLE_ADDR
+ * { u64 id; } && PERF_SAMPLE_ID
+ * { u64 stream_id;} && PERF_SAMPLE_STREAM_ID
+ * { u32 cpu, res; } && PERF_SAMPLE_CPU
+ * { u64 period; } && PERF_SAMPLE_PERIOD
+ *
+ * { struct read_format values; } && PERF_SAMPLE_READ
+ *
+ * { u64 nr,
+ * u64 ips[nr]; } && PERF_SAMPLE_CALLCHAIN
+ *
+ * #
+ * # The RAW record below is opaque data wrt the ABI
+ * #
+ * # That is, the ABI doesn't make any promises wrt to
+ * # the stability of its content, it may vary depending
+ * # on event, hardware, kernel version and phase of
+ * # the moon.
+ * #
+ * # In other words, PERF_SAMPLE_RAW contents are not an ABI.
+ * #
+ *
+ * { u32 size;
+ * char data[size];}&& PERF_SAMPLE_RAW
+ *
+ * { u64 from, to, flags } lbr[nr];} && PERF_SAMPLE_BRANCH_STACK
+ *
+ * { u64 abi; # enum perf_sample_regs_abi
+ * u64 regs[weight(mask)]; } && PERF_SAMPLE_REGS_USER
+ *
+ * { u64 size;
+ * char data[size];
+ * u64 dyn_size; } && PERF_SAMPLE_STACK_USER
+ * };
+ */
+ PERF_RECORD_SAMPLE = 9,
+
+ PERF_RECORD_MAX, /* non-ABI */
+};
+
+#define PERF_MAX_STACK_DEPTH 127
+
+enum perf_callchain_context {
+ PERF_CONTEXT_HV = (__u64)-32,
+ PERF_CONTEXT_KERNEL = (__u64)-128,
+ PERF_CONTEXT_USER = (__u64)-512,
+
+ PERF_CONTEXT_GUEST = (__u64)-2048,
+ PERF_CONTEXT_GUEST_KERNEL = (__u64)-2176,
+ PERF_CONTEXT_GUEST_USER = (__u64)-2560,
+
+ PERF_CONTEXT_MAX = (__u64)-4095,
+};
+
+#define PERF_FLAG_FD_NO_GROUP (1U << 0)
+#define PERF_FLAG_FD_OUTPUT (1U << 1)
+#define PERF_FLAG_PID_CGROUP (1U << 2) /* pid=cgroup id, per-cpu mode only */
+
+#endif /* _UAPI_LINUX_PERF_EVENT_H */
diff --git a/include/uapi/linux/personality.h b/include/uapi/linux/personality.h
new file mode 100644
index 0000000..aa169c4
--- /dev/null
+++ b/include/uapi/linux/personality.h
@@ -0,0 +1,69 @@
+#ifndef _UAPI_LINUX_PERSONALITY_H
+#define _UAPI_LINUX_PERSONALITY_H
+
+
+/*
+ * Flags for bug emulation.
+ *
+ * These occupy the top three bytes.
+ */
+enum {
+ UNAME26 = 0x0020000,
+ ADDR_NO_RANDOMIZE = 0x0040000, /* disable randomization of VA space */
+ FDPIC_FUNCPTRS = 0x0080000, /* userspace function ptrs point to descriptors
+ * (signal handling)
+ */
+ MMAP_PAGE_ZERO = 0x0100000,
+ ADDR_COMPAT_LAYOUT = 0x0200000,
+ READ_IMPLIES_EXEC = 0x0400000,
+ ADDR_LIMIT_32BIT = 0x0800000,
+ SHORT_INODE = 0x1000000,
+ WHOLE_SECONDS = 0x2000000,
+ STICKY_TIMEOUTS = 0x4000000,
+ ADDR_LIMIT_3GB = 0x8000000,
+};
+
+/*
+ * Security-relevant compatibility flags that must be
+ * cleared upon setuid or setgid exec:
+ */
+#define PER_CLEAR_ON_SETID (READ_IMPLIES_EXEC | \
+ ADDR_NO_RANDOMIZE | \
+ ADDR_COMPAT_LAYOUT | \
+ MMAP_PAGE_ZERO)
+
+/*
+ * Personality types.
+ *
+ * These go in the low byte. Avoid using the top bit, it will
+ * conflict with error returns.
+ */
+enum {
+ PER_LINUX = 0x0000,
+ PER_LINUX_32BIT = 0x0000 | ADDR_LIMIT_32BIT,
+ PER_LINUX_FDPIC = 0x0000 | FDPIC_FUNCPTRS,
+ PER_SVR4 = 0x0001 | STICKY_TIMEOUTS | MMAP_PAGE_ZERO,
+ PER_SVR3 = 0x0002 | STICKY_TIMEOUTS | SHORT_INODE,
+ PER_SCOSVR3 = 0x0003 | STICKY_TIMEOUTS |
+ WHOLE_SECONDS | SHORT_INODE,
+ PER_OSR5 = 0x0003 | STICKY_TIMEOUTS | WHOLE_SECONDS,
+ PER_WYSEV386 = 0x0004 | STICKY_TIMEOUTS | SHORT_INODE,
+ PER_ISCR4 = 0x0005 | STICKY_TIMEOUTS,
+ PER_BSD = 0x0006,
+ PER_SUNOS = 0x0006 | STICKY_TIMEOUTS,
+ PER_XENIX = 0x0007 | STICKY_TIMEOUTS | SHORT_INODE,
+ PER_LINUX32 = 0x0008,
+ PER_LINUX32_3GB = 0x0008 | ADDR_LIMIT_3GB,
+ PER_IRIX32 = 0x0009 | STICKY_TIMEOUTS,/* IRIX5 32-bit */
+ PER_IRIXN32 = 0x000a | STICKY_TIMEOUTS,/* IRIX6 new 32-bit */
+ PER_IRIX64 = 0x000b | STICKY_TIMEOUTS,/* IRIX6 64-bit */
+ PER_RISCOS = 0x000c,
+ PER_SOLARIS = 0x000d | STICKY_TIMEOUTS,
+ PER_UW7 = 0x000e | STICKY_TIMEOUTS | MMAP_PAGE_ZERO,
+ PER_OSF4 = 0x000f, /* OSF/1 v4 */
+ PER_HPUX = 0x0010,
+ PER_MASK = 0x00ff,
+};
+
+
+#endif /* _UAPI_LINUX_PERSONALITY_H */
diff --git a/include/linux/pfkeyv2.h b/include/uapi/linux/pfkeyv2.h
similarity index 100%
rename from include/linux/pfkeyv2.h
rename to include/uapi/linux/pfkeyv2.h
diff --git a/include/linux/pg.h b/include/uapi/linux/pg.h
similarity index 100%
rename from include/linux/pg.h
rename to include/uapi/linux/pg.h
diff --git a/include/linux/phantom.h b/include/uapi/linux/phantom.h
similarity index 100%
rename from include/linux/phantom.h
rename to include/uapi/linux/phantom.h
diff --git a/include/uapi/linux/phonet.h b/include/uapi/linux/phonet.h
new file mode 100644
index 0000000..a3e1d65
--- /dev/null
+++ b/include/uapi/linux/phonet.h
@@ -0,0 +1,185 @@
+/**
+ * file phonet.h
+ *
+ * Phonet sockets kernel interface
+ *
+ * Copyright (C) 2008 Nokia Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#ifndef _UAPILINUX_PHONET_H
+#define _UAPILINUX_PHONET_H
+
+#include <linux/types.h>
+#include <linux/socket.h>
+
+/* Automatic protocol selection */
+#define PN_PROTO_TRANSPORT 0
+/* Phonet datagram socket */
+#define PN_PROTO_PHONET 1
+/* Phonet pipe */
+#define PN_PROTO_PIPE 2
+#define PHONET_NPROTO 3
+
+/* Socket options for SOL_PNPIPE level */
+#define PNPIPE_ENCAP 1
+#define PNPIPE_IFINDEX 2
+#define PNPIPE_HANDLE 3
+#define PNPIPE_INITSTATE 4
+
+#define PNADDR_ANY 0
+#define PNADDR_BROADCAST 0xFC
+#define PNPORT_RESOURCE_ROUTING 0
+
+/* Values for PNPIPE_ENCAP option */
+#define PNPIPE_ENCAP_NONE 0
+#define PNPIPE_ENCAP_IP 1
+
+/* ioctls */
+#define SIOCPNGETOBJECT (SIOCPROTOPRIVATE + 0)
+#define SIOCPNENABLEPIPE (SIOCPROTOPRIVATE + 13)
+#define SIOCPNADDRESOURCE (SIOCPROTOPRIVATE + 14)
+#define SIOCPNDELRESOURCE (SIOCPROTOPRIVATE + 15)
+
+/* Phonet protocol header */
+struct phonethdr {
+ __u8 pn_rdev;
+ __u8 pn_sdev;
+ __u8 pn_res;
+ __be16 pn_length;
+ __u8 pn_robj;
+ __u8 pn_sobj;
+} __attribute__((packed));
+
+/* Common Phonet payload header */
+struct phonetmsg {
+ __u8 pn_trans_id; /* transaction ID */
+ __u8 pn_msg_id; /* message type */
+ union {
+ struct {
+ __u8 pn_submsg_id; /* message subtype */
+ __u8 pn_data[5];
+ } base;
+ struct {
+ __u16 pn_e_res_id; /* extended resource ID */
+ __u8 pn_e_submsg_id; /* message subtype */
+ __u8 pn_e_data[3];
+ } ext;
+ } pn_msg_u;
+};
+#define PN_COMMON_MESSAGE 0xF0
+#define PN_COMMGR 0x10
+#define PN_PREFIX 0xE0 /* resource for extended messages */
+#define pn_submsg_id pn_msg_u.base.pn_submsg_id
+#define pn_e_submsg_id pn_msg_u.ext.pn_e_submsg_id
+#define pn_e_res_id pn_msg_u.ext.pn_e_res_id
+#define pn_data pn_msg_u.base.pn_data
+#define pn_e_data pn_msg_u.ext.pn_e_data
+
+/* data for unreachable errors */
+#define PN_COMM_SERVICE_NOT_IDENTIFIED_RESP 0x01
+#define PN_COMM_ISA_ENTITY_NOT_REACHABLE_RESP 0x14
+#define pn_orig_msg_id pn_data[0]
+#define pn_status pn_data[1]
+#define pn_e_orig_msg_id pn_e_data[0]
+#define pn_e_status pn_e_data[1]
+
+/* Phonet socket address structure */
+struct sockaddr_pn {
+ __kernel_sa_family_t spn_family;
+ __u8 spn_obj;
+ __u8 spn_dev;
+ __u8 spn_resource;
+ __u8 spn_zero[sizeof(struct sockaddr) - sizeof(__kernel_sa_family_t) - 3];
+} __attribute__((packed));
+
+/* Well known address */
+#define PN_DEV_PC 0x10
+
+static inline __u16 pn_object(__u8 addr, __u16 port)
+{
+ return (addr << 8) | (port & 0x3ff);
+}
+
+static inline __u8 pn_obj(__u16 handle)
+{
+ return handle & 0xff;
+}
+
+static inline __u8 pn_dev(__u16 handle)
+{
+ return handle >> 8;
+}
+
+static inline __u16 pn_port(__u16 handle)
+{
+ return handle & 0x3ff;
+}
+
+static inline __u8 pn_addr(__u16 handle)
+{
+ return (handle >> 8) & 0xfc;
+}
+
+static inline void pn_sockaddr_set_addr(struct sockaddr_pn *spn, __u8 addr)
+{
+ spn->spn_dev &= 0x03;
+ spn->spn_dev |= addr & 0xfc;
+}
+
+static inline void pn_sockaddr_set_port(struct sockaddr_pn *spn, __u16 port)
+{
+ spn->spn_dev &= 0xfc;
+ spn->spn_dev |= (port >> 8) & 0x03;
+ spn->spn_obj = port & 0xff;
+}
+
+static inline void pn_sockaddr_set_object(struct sockaddr_pn *spn,
+ __u16 handle)
+{
+ spn->spn_dev = pn_dev(handle);
+ spn->spn_obj = pn_obj(handle);
+}
+
+static inline void pn_sockaddr_set_resource(struct sockaddr_pn *spn,
+ __u8 resource)
+{
+ spn->spn_resource = resource;
+}
+
+static inline __u8 pn_sockaddr_get_addr(const struct sockaddr_pn *spn)
+{
+ return spn->spn_dev & 0xfc;
+}
+
+static inline __u16 pn_sockaddr_get_port(const struct sockaddr_pn *spn)
+{
+ return ((spn->spn_dev & 0x03) << 8) | spn->spn_obj;
+}
+
+static inline __u16 pn_sockaddr_get_object(const struct sockaddr_pn *spn)
+{
+ return pn_object(spn->spn_dev, spn->spn_obj);
+}
+
+static inline __u8 pn_sockaddr_get_resource(const struct sockaddr_pn *spn)
+{
+ return spn->spn_resource;
+}
+
+/* Phonet device ioctl requests */
+
+#endif /* _UAPILINUX_PHONET_H */
diff --git a/include/linux/pkt_cls.h b/include/uapi/linux/pkt_cls.h
similarity index 100%
rename from include/linux/pkt_cls.h
rename to include/uapi/linux/pkt_cls.h
diff --git a/include/linux/pkt_sched.h b/include/uapi/linux/pkt_sched.h
similarity index 100%
rename from include/linux/pkt_sched.h
rename to include/uapi/linux/pkt_sched.h
diff --git a/include/uapi/linux/pktcdvd.h b/include/uapi/linux/pktcdvd.h
new file mode 100644
index 0000000..2640b9d
--- /dev/null
+++ b/include/uapi/linux/pktcdvd.h
@@ -0,0 +1,111 @@
+/*
+ * Copyright (C) 2000 Jens Axboe <axboe@suse.de>
+ * Copyright (C) 2001-2004 Peter Osterlund <petero2@telia.com>
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License. See linux/COPYING for more information.
+ *
+ * Packet writing layer for ATAPI and SCSI CD-R, CD-RW, DVD-R, and
+ * DVD-RW devices.
+ *
+ */
+#ifndef _UAPI__PKTCDVD_H
+#define _UAPI__PKTCDVD_H
+
+#include <linux/types.h>
+
+/*
+ * 1 for normal debug messages, 2 is very verbose. 0 to turn it off.
+ */
+#define PACKET_DEBUG 1
+
+#define MAX_WRITERS 8
+
+#define PKT_RB_POOL_SIZE 512
+
+/*
+ * How long we should hold a non-full packet before starting data gathering.
+ */
+#define PACKET_WAIT_TIME (HZ * 5 / 1000)
+
+/*
+ * use drive write caching -- we need deferred error handling to be
+ * able to successfully recover with this option (drive will return good
+ * status as soon as the cdb is validated).
+ */
+#if defined(CONFIG_CDROM_PKTCDVD_WCACHE)
+#define USE_WCACHING 1
+#else
+#define USE_WCACHING 0
+#endif
+
+/*
+ * No user-servicable parts beyond this point ->
+ */
+
+/*
+ * device types
+ */
+#define PACKET_CDR 1
+#define PACKET_CDRW 2
+#define PACKET_DVDR 3
+#define PACKET_DVDRW 4
+
+/*
+ * flags
+ */
+#define PACKET_WRITABLE 1 /* pd is writable */
+#define PACKET_NWA_VALID 2 /* next writable address valid */
+#define PACKET_LRA_VALID 3 /* last recorded address valid */
+#define PACKET_MERGE_SEGS 4 /* perform segment merging to keep */
+ /* underlying cdrom device happy */
+
+/*
+ * Disc status -- from READ_DISC_INFO
+ */
+#define PACKET_DISC_EMPTY 0
+#define PACKET_DISC_INCOMPLETE 1
+#define PACKET_DISC_COMPLETE 2
+#define PACKET_DISC_OTHER 3
+
+/*
+ * write type, and corresponding data block type
+ */
+#define PACKET_MODE1 1
+#define PACKET_MODE2 2
+#define PACKET_BLOCK_MODE1 8
+#define PACKET_BLOCK_MODE2 10
+
+/*
+ * Last session/border status
+ */
+#define PACKET_SESSION_EMPTY 0
+#define PACKET_SESSION_INCOMPLETE 1
+#define PACKET_SESSION_RESERVED 2
+#define PACKET_SESSION_COMPLETE 3
+
+#define PACKET_MCN "4a656e734178626f65323030300000"
+
+#undef PACKET_USE_LS
+
+#define PKT_CTRL_CMD_SETUP 0
+#define PKT_CTRL_CMD_TEARDOWN 1
+#define PKT_CTRL_CMD_STATUS 2
+
+struct pkt_ctrl_command {
+ __u32 command; /* in: Setup, teardown, status */
+ __u32 dev_index; /* in/out: Device index */
+ __u32 dev; /* in/out: Device nr for cdrw device */
+ __u32 pkt_dev; /* in/out: Device nr for packet device */
+ __u32 num_devices; /* out: Largest device index + 1 */
+ __u32 padding; /* Not used */
+};
+
+/*
+ * packet ioctls
+ */
+#define PACKET_IOCTL_MAGIC ('X')
+#define PACKET_CTRL_CMD _IOWR(PACKET_IOCTL_MAGIC, 1, struct pkt_ctrl_command)
+
+
+#endif /* _UAPI__PKTCDVD_H */
diff --git a/include/uapi/linux/pmu.h b/include/uapi/linux/pmu.h
new file mode 100644
index 0000000..caead36
--- /dev/null
+++ b/include/uapi/linux/pmu.h
@@ -0,0 +1,139 @@
+/*
+ * Definitions for talking to the PMU. The PMU is a microcontroller
+ * which controls battery charging and system power on PowerBook 3400
+ * and 2400 models as well as the RTC and various other things.
+ *
+ * Copyright (C) 1998 Paul Mackerras.
+ */
+
+#ifndef _UAPI_LINUX_PMU_H
+#define _UAPI_LINUX_PMU_H
+
+#define PMU_DRIVER_VERSION 2
+
+/*
+ * PMU commands
+ */
+#define PMU_POWER_CTRL0 0x10 /* control power of some devices */
+#define PMU_POWER_CTRL 0x11 /* control power of some devices */
+#define PMU_ADB_CMD 0x20 /* send ADB packet */
+#define PMU_ADB_POLL_OFF 0x21 /* disable ADB auto-poll */
+#define PMU_WRITE_NVRAM 0x33 /* write non-volatile RAM */
+#define PMU_READ_NVRAM 0x3b /* read non-volatile RAM */
+#define PMU_SET_RTC 0x30 /* set real-time clock */
+#define PMU_READ_RTC 0x38 /* read real-time clock */
+#define PMU_SET_VOLBUTTON 0x40 /* set volume up/down position */
+#define PMU_BACKLIGHT_BRIGHT 0x41 /* set backlight brightness */
+#define PMU_GET_VOLBUTTON 0x48 /* get volume up/down position */
+#define PMU_PCEJECT 0x4c /* eject PC-card from slot */
+#define PMU_BATTERY_STATE 0x6b /* report battery state etc. */
+#define PMU_SMART_BATTERY_STATE 0x6f /* report battery state (new way) */
+#define PMU_SET_INTR_MASK 0x70 /* set PMU interrupt mask */
+#define PMU_INT_ACK 0x78 /* read interrupt bits */
+#define PMU_SHUTDOWN 0x7e /* turn power off */
+#define PMU_CPU_SPEED 0x7d /* control CPU speed on some models */
+#define PMU_SLEEP 0x7f /* put CPU to sleep */
+#define PMU_POWER_EVENTS 0x8f /* Send power-event commands to PMU */
+#define PMU_I2C_CMD 0x9a /* I2C operations */
+#define PMU_RESET 0xd0 /* reset CPU */
+#define PMU_GET_BRIGHTBUTTON 0xd9 /* report brightness up/down pos */
+#define PMU_GET_COVER 0xdc /* report cover open/closed */
+#define PMU_SYSTEM_READY 0xdf /* tell PMU we are awake */
+#define PMU_GET_VERSION 0xea /* read the PMU version */
+
+/* Bits to use with the PMU_POWER_CTRL0 command */
+#define PMU_POW0_ON 0x80 /* OR this to power ON the device */
+#define PMU_POW0_OFF 0x00 /* leave bit 7 to 0 to power it OFF */
+#define PMU_POW0_HARD_DRIVE 0x04 /* Hard drive power (on wallstreet/lombard ?) */
+
+/* Bits to use with the PMU_POWER_CTRL command */
+#define PMU_POW_ON 0x80 /* OR this to power ON the device */
+#define PMU_POW_OFF 0x00 /* leave bit 7 to 0 to power it OFF */
+#define PMU_POW_BACKLIGHT 0x01 /* backlight power */
+#define PMU_POW_CHARGER 0x02 /* battery charger power */
+#define PMU_POW_IRLED 0x04 /* IR led power (on wallstreet) */
+#define PMU_POW_MEDIABAY 0x08 /* media bay power (wallstreet/lombard ?) */
+
+/* Bits in PMU interrupt and interrupt mask bytes */
+#define PMU_INT_PCEJECT 0x04 /* PC-card eject buttons */
+#define PMU_INT_SNDBRT 0x08 /* sound/brightness up/down buttons */
+#define PMU_INT_ADB 0x10 /* ADB autopoll or reply data */
+#define PMU_INT_BATTERY 0x20 /* Battery state change */
+#define PMU_INT_ENVIRONMENT 0x40 /* Environment interrupts */
+#define PMU_INT_TICK 0x80 /* 1-second tick interrupt */
+
+/* Other bits in PMU interrupt valid when PMU_INT_ADB is set */
+#define PMU_INT_ADB_AUTO 0x04 /* ADB autopoll, when PMU_INT_ADB */
+#define PMU_INT_WAITING_CHARGER 0x01 /* ??? */
+#define PMU_INT_AUTO_SRQ_POLL 0x02 /* ??? */
+
+/* Bits in the environement message (either obtained via PMU_GET_COVER,
+ * or via PMU_INT_ENVIRONMENT on core99 */
+#define PMU_ENV_LID_CLOSED 0x01 /* The lid is closed */
+
+/* I2C related definitions */
+#define PMU_I2C_MODE_SIMPLE 0
+#define PMU_I2C_MODE_STDSUB 1
+#define PMU_I2C_MODE_COMBINED 2
+
+#define PMU_I2C_BUS_STATUS 0
+#define PMU_I2C_BUS_SYSCLK 1
+#define PMU_I2C_BUS_POWER 2
+
+#define PMU_I2C_STATUS_OK 0
+#define PMU_I2C_STATUS_DATAREAD 1
+#define PMU_I2C_STATUS_BUSY 0xfe
+
+
+/* Kind of PMU (model) */
+enum {
+ PMU_UNKNOWN,
+ PMU_OHARE_BASED, /* 2400, 3400, 3500 (old G3 powerbook) */
+ PMU_HEATHROW_BASED, /* PowerBook G3 series */
+ PMU_PADDINGTON_BASED, /* 1999 PowerBook G3 */
+ PMU_KEYLARGO_BASED, /* Core99 motherboard (PMU99) */
+ PMU_68K_V1, /* 68K PMU, version 1 */
+ PMU_68K_V2, /* 68K PMU, version 2 */
+};
+
+/* PMU PMU_POWER_EVENTS commands */
+enum {
+ PMU_PWR_GET_POWERUP_EVENTS = 0x00,
+ PMU_PWR_SET_POWERUP_EVENTS = 0x01,
+ PMU_PWR_CLR_POWERUP_EVENTS = 0x02,
+ PMU_PWR_GET_WAKEUP_EVENTS = 0x03,
+ PMU_PWR_SET_WAKEUP_EVENTS = 0x04,
+ PMU_PWR_CLR_WAKEUP_EVENTS = 0x05,
+};
+
+/* Power events wakeup bits */
+enum {
+ PMU_PWR_WAKEUP_KEY = 0x01, /* Wake on key press */
+ PMU_PWR_WAKEUP_AC_INSERT = 0x02, /* Wake on AC adapter plug */
+ PMU_PWR_WAKEUP_AC_CHANGE = 0x04,
+ PMU_PWR_WAKEUP_LID_OPEN = 0x08,
+ PMU_PWR_WAKEUP_RING = 0x10,
+};
+
+/*
+ * Ioctl commands for the /dev/pmu device
+ */
+#include <linux/ioctl.h>
+
+/* no param */
+#define PMU_IOC_SLEEP _IO('B', 0)
+/* out param: u32* backlight value: 0 to 15 */
+#define PMU_IOC_GET_BACKLIGHT _IOR('B', 1, size_t)
+/* in param: u32 backlight value: 0 to 15 */
+#define PMU_IOC_SET_BACKLIGHT _IOW('B', 2, size_t)
+/* out param: u32* PMU model */
+#define PMU_IOC_GET_MODEL _IOR('B', 3, size_t)
+/* out param: u32* has_adb: 0 or 1 */
+#define PMU_IOC_HAS_ADB _IOR('B', 4, size_t)
+/* out param: u32* can_sleep: 0 or 1 */
+#define PMU_IOC_CAN_SLEEP _IOR('B', 5, size_t)
+/* no param, but historically was _IOR('B', 6, 0), meaning 4 bytes */
+#define PMU_IOC_GRAB_BACKLIGHT _IOR('B', 6, size_t)
+
+
+#endif /* _UAPI_LINUX_PMU_H */
diff --git a/include/uapi/linux/poll.h b/include/uapi/linux/poll.h
new file mode 100644
index 0000000..2001fed
--- /dev/null
+++ b/include/uapi/linux/poll.h
@@ -0,0 +1 @@
+#include <asm/poll.h>
diff --git a/include/linux/posix_types.h b/include/uapi/linux/posix_types.h
similarity index 100%
rename from include/linux/posix_types.h
rename to include/uapi/linux/posix_types.h
diff --git a/include/linux/ppdev.h b/include/uapi/linux/ppdev.h
similarity index 100%
rename from include/linux/ppdev.h
rename to include/uapi/linux/ppdev.h
diff --git a/include/uapi/linux/ppp-comp.h b/include/uapi/linux/ppp-comp.h
new file mode 100644
index 0000000..0a15bbb
--- /dev/null
+++ b/include/uapi/linux/ppp-comp.h
@@ -0,0 +1,93 @@
+/*
+ * ppp-comp.h - Definitions for doing PPP packet compression.
+ *
+ * Copyright 1994-1998 Paul Mackerras.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ */
+#ifndef _UAPI_NET_PPP_COMP_H
+#define _UAPI_NET_PPP_COMP_H
+
+
+/*
+ * CCP codes.
+ */
+
+#define CCP_CONFREQ 1
+#define CCP_CONFACK 2
+#define CCP_TERMREQ 5
+#define CCP_TERMACK 6
+#define CCP_RESETREQ 14
+#define CCP_RESETACK 15
+
+/*
+ * Max # bytes for a CCP option
+ */
+
+#define CCP_MAX_OPTION_LENGTH 32
+
+/*
+ * Parts of a CCP packet.
+ */
+
+#define CCP_CODE(dp) ((dp)[0])
+#define CCP_ID(dp) ((dp)[1])
+#define CCP_LENGTH(dp) (((dp)[2] << 8) + (dp)[3])
+#define CCP_HDRLEN 4
+
+#define CCP_OPT_CODE(dp) ((dp)[0])
+#define CCP_OPT_LENGTH(dp) ((dp)[1])
+#define CCP_OPT_MINLEN 2
+
+/*
+ * Definitions for BSD-Compress.
+ */
+
+#define CI_BSD_COMPRESS 21 /* config. option for BSD-Compress */
+#define CILEN_BSD_COMPRESS 3 /* length of config. option */
+
+/* Macros for handling the 3rd byte of the BSD-Compress config option. */
+#define BSD_NBITS(x) ((x) & 0x1F) /* number of bits requested */
+#define BSD_VERSION(x) ((x) >> 5) /* version of option format */
+#define BSD_CURRENT_VERSION 1 /* current version number */
+#define BSD_MAKE_OPT(v, n) (((v) << 5) | (n))
+
+#define BSD_MIN_BITS 9 /* smallest code size supported */
+#define BSD_MAX_BITS 15 /* largest code size supported */
+
+/*
+ * Definitions for Deflate.
+ */
+
+#define CI_DEFLATE 26 /* config option for Deflate */
+#define CI_DEFLATE_DRAFT 24 /* value used in original draft RFC */
+#define CILEN_DEFLATE 4 /* length of its config option */
+
+#define DEFLATE_MIN_SIZE 9
+#define DEFLATE_MAX_SIZE 15
+#define DEFLATE_METHOD_VAL 8
+#define DEFLATE_SIZE(x) (((x) >> 4) + 8)
+#define DEFLATE_METHOD(x) ((x) & 0x0F)
+#define DEFLATE_MAKE_OPT(w) ((((w) - 8) << 4) + DEFLATE_METHOD_VAL)
+#define DEFLATE_CHK_SEQUENCE 0
+
+/*
+ * Definitions for MPPE.
+ */
+
+#define CI_MPPE 18 /* config option for MPPE */
+#define CILEN_MPPE 6 /* length of config option */
+
+/*
+ * Definitions for other, as yet unsupported, compression methods.
+ */
+
+#define CI_PREDICTOR_1 1 /* config option for Predictor-1 */
+#define CILEN_PREDICTOR_1 2 /* length of its config option */
+#define CI_PREDICTOR_2 2 /* config option for Predictor-2 */
+#define CILEN_PREDICTOR_2 2 /* length of its config option */
+
+
+#endif /* _UAPI_NET_PPP_COMP_H */
diff --git a/include/linux/ppp-ioctl.h b/include/uapi/linux/ppp-ioctl.h
similarity index 100%
rename from include/linux/ppp-ioctl.h
rename to include/uapi/linux/ppp-ioctl.h
diff --git a/include/uapi/linux/ppp_defs.h b/include/uapi/linux/ppp_defs.h
new file mode 100644
index 0000000..283fc05
--- /dev/null
+++ b/include/uapi/linux/ppp_defs.h
@@ -0,0 +1,150 @@
+/*
+ * ppp_defs.h - PPP definitions.
+ *
+ * Copyright 1994-2000 Paul Mackerras.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ */
+#include <linux/types.h>
+
+#ifndef _UAPI_PPP_DEFS_H_
+#define _UAPI_PPP_DEFS_H_
+
+/*
+ * The basic PPP frame.
+ */
+#define PPP_HDRLEN 4 /* octets for standard ppp header */
+#define PPP_FCSLEN 2 /* octets for FCS */
+#define PPP_MRU 1500 /* default MRU = max length of info field */
+
+#define PPP_ADDRESS(p) (((__u8 *)(p))[0])
+#define PPP_CONTROL(p) (((__u8 *)(p))[1])
+#define PPP_PROTOCOL(p) ((((__u8 *)(p))[2] << 8) + ((__u8 *)(p))[3])
+
+/*
+ * Significant octet values.
+ */
+#define PPP_ALLSTATIONS 0xff /* All-Stations broadcast address */
+#define PPP_UI 0x03 /* Unnumbered Information */
+#define PPP_FLAG 0x7e /* Flag Sequence */
+#define PPP_ESCAPE 0x7d /* Asynchronous Control Escape */
+#define PPP_TRANS 0x20 /* Asynchronous transparency modifier */
+
+/*
+ * Protocol field values.
+ */
+#define PPP_IP 0x21 /* Internet Protocol */
+#define PPP_AT 0x29 /* AppleTalk Protocol */
+#define PPP_IPX 0x2b /* IPX protocol */
+#define PPP_VJC_COMP 0x2d /* VJ compressed TCP */
+#define PPP_VJC_UNCOMP 0x2f /* VJ uncompressed TCP */
+#define PPP_MP 0x3d /* Multilink protocol */
+#define PPP_IPV6 0x57 /* Internet Protocol Version 6 */
+#define PPP_COMPFRAG 0xfb /* fragment compressed below bundle */
+#define PPP_COMP 0xfd /* compressed packet */
+#define PPP_MPLS_UC 0x0281 /* Multi Protocol Label Switching - Unicast */
+#define PPP_MPLS_MC 0x0283 /* Multi Protocol Label Switching - Multicast */
+#define PPP_IPCP 0x8021 /* IP Control Protocol */
+#define PPP_ATCP 0x8029 /* AppleTalk Control Protocol */
+#define PPP_IPXCP 0x802b /* IPX Control Protocol */
+#define PPP_IPV6CP 0x8057 /* IPv6 Control Protocol */
+#define PPP_CCPFRAG 0x80fb /* CCP at link level (below MP bundle) */
+#define PPP_CCP 0x80fd /* Compression Control Protocol */
+#define PPP_MPLSCP 0x80fd /* MPLS Control Protocol */
+#define PPP_LCP 0xc021 /* Link Control Protocol */
+#define PPP_PAP 0xc023 /* Password Authentication Protocol */
+#define PPP_LQR 0xc025 /* Link Quality Report protocol */
+#define PPP_CHAP 0xc223 /* Cryptographic Handshake Auth. Protocol */
+#define PPP_CBCP 0xc029 /* Callback Control Protocol */
+
+/*
+ * Values for FCS calculations.
+ */
+
+#define PPP_INITFCS 0xffff /* Initial FCS value */
+#define PPP_GOODFCS 0xf0b8 /* Good final FCS value */
+
+
+/*
+ * Extended asyncmap - allows any character to be escaped.
+ */
+
+typedef __u32 ext_accm[8];
+
+/*
+ * What to do with network protocol (NP) packets.
+ */
+enum NPmode {
+ NPMODE_PASS, /* pass the packet through */
+ NPMODE_DROP, /* silently drop the packet */
+ NPMODE_ERROR, /* return an error */
+ NPMODE_QUEUE /* save it up for later. */
+};
+
+/*
+ * Statistics for LQRP and pppstats
+ */
+struct pppstat {
+ __u32 ppp_discards; /* # frames discarded */
+
+ __u32 ppp_ibytes; /* bytes received */
+ __u32 ppp_ioctects; /* bytes received not in error */
+ __u32 ppp_ipackets; /* packets received */
+ __u32 ppp_ierrors; /* receive errors */
+ __u32 ppp_ilqrs; /* # LQR frames received */
+
+ __u32 ppp_obytes; /* raw bytes sent */
+ __u32 ppp_ooctects; /* frame bytes sent */
+ __u32 ppp_opackets; /* packets sent */
+ __u32 ppp_oerrors; /* transmit errors */
+ __u32 ppp_olqrs; /* # LQR frames sent */
+};
+
+struct vjstat {
+ __u32 vjs_packets; /* outbound packets */
+ __u32 vjs_compressed; /* outbound compressed packets */
+ __u32 vjs_searches; /* searches for connection state */
+ __u32 vjs_misses; /* times couldn't find conn. state */
+ __u32 vjs_uncompressedin; /* inbound uncompressed packets */
+ __u32 vjs_compressedin; /* inbound compressed packets */
+ __u32 vjs_errorin; /* inbound unknown type packets */
+ __u32 vjs_tossed; /* inbound packets tossed because of error */
+};
+
+struct compstat {
+ __u32 unc_bytes; /* total uncompressed bytes */
+ __u32 unc_packets; /* total uncompressed packets */
+ __u32 comp_bytes; /* compressed bytes */
+ __u32 comp_packets; /* compressed packets */
+ __u32 inc_bytes; /* incompressible bytes */
+ __u32 inc_packets; /* incompressible packets */
+
+ /* the compression ratio is defined as in_count / bytes_out */
+ __u32 in_count; /* Bytes received */
+ __u32 bytes_out; /* Bytes transmitted */
+
+ double ratio; /* not computed in kernel. */
+};
+
+struct ppp_stats {
+ struct pppstat p; /* basic PPP statistics */
+ struct vjstat vj; /* VJ header compression statistics */
+};
+
+struct ppp_comp_stats {
+ struct compstat c; /* packet compression statistics */
+ struct compstat d; /* packet decompression statistics */
+};
+
+/*
+ * The following structure records the time in seconds since
+ * the last NP packet was sent or received.
+ */
+struct ppp_idle {
+ __kernel_time_t xmit_idle; /* time since last NP packet sent */
+ __kernel_time_t recv_idle; /* time since last NP packet received */
+};
+
+#endif /* _UAPI_PPP_DEFS_H_ */
diff --git a/include/linux/pps.h b/include/uapi/linux/pps.h
similarity index 100%
rename from include/linux/pps.h
rename to include/uapi/linux/pps.h
diff --git a/include/linux/prctl.h b/include/uapi/linux/prctl.h
similarity index 100%
rename from include/linux/prctl.h
rename to include/uapi/linux/prctl.h
diff --git a/include/linux/ptp_clock.h b/include/uapi/linux/ptp_clock.h
similarity index 100%
rename from include/linux/ptp_clock.h
rename to include/uapi/linux/ptp_clock.h
diff --git a/include/uapi/linux/ptrace.h b/include/uapi/linux/ptrace.h
new file mode 100644
index 0000000..1ef6c05
--- /dev/null
+++ b/include/uapi/linux/ptrace.h
@@ -0,0 +1,81 @@
+#ifndef _UAPI_LINUX_PTRACE_H
+#define _UAPI_LINUX_PTRACE_H
+/* ptrace.h */
+/* structs and defines to help the user use the ptrace system call. */
+
+/* has the defines to get at the registers. */
+
+
+#define PTRACE_TRACEME 0
+#define PTRACE_PEEKTEXT 1
+#define PTRACE_PEEKDATA 2
+#define PTRACE_PEEKUSR 3
+#define PTRACE_POKETEXT 4
+#define PTRACE_POKEDATA 5
+#define PTRACE_POKEUSR 6
+#define PTRACE_CONT 7
+#define PTRACE_KILL 8
+#define PTRACE_SINGLESTEP 9
+
+#define PTRACE_ATTACH 16
+#define PTRACE_DETACH 17
+
+#define PTRACE_SYSCALL 24
+
+/* 0x4200-0x4300 are reserved for architecture-independent additions. */
+#define PTRACE_SETOPTIONS 0x4200
+#define PTRACE_GETEVENTMSG 0x4201
+#define PTRACE_GETSIGINFO 0x4202
+#define PTRACE_SETSIGINFO 0x4203
+
+/*
+ * Generic ptrace interface that exports the architecture specific regsets
+ * using the corresponding NT_* types (which are also used in the core dump).
+ * Please note that the NT_PRSTATUS note type in a core dump contains a full
+ * 'struct elf_prstatus'. But the user_regset for NT_PRSTATUS contains just the
+ * elf_gregset_t that is the pr_reg field of 'struct elf_prstatus'. For all the
+ * other user_regset flavors, the user_regset layout and the ELF core dump note
+ * payload are exactly the same layout.
+ *
+ * This interface usage is as follows:
+ * struct iovec iov = { buf, len};
+ *
+ * ret = ptrace(PTRACE_GETREGSET/PTRACE_SETREGSET, pid, NT_XXX_TYPE, &iov);
+ *
+ * On the successful completion, iov.len will be updated by the kernel,
+ * specifying how much the kernel has written/read to/from the user's iov.buf.
+ */
+#define PTRACE_GETREGSET 0x4204
+#define PTRACE_SETREGSET 0x4205
+
+#define PTRACE_SEIZE 0x4206
+#define PTRACE_INTERRUPT 0x4207
+#define PTRACE_LISTEN 0x4208
+
+/* Wait extended result codes for the above trace options. */
+#define PTRACE_EVENT_FORK 1
+#define PTRACE_EVENT_VFORK 2
+#define PTRACE_EVENT_CLONE 3
+#define PTRACE_EVENT_EXEC 4
+#define PTRACE_EVENT_VFORK_DONE 5
+#define PTRACE_EVENT_EXIT 6
+#define PTRACE_EVENT_SECCOMP 7
+/* Extended result codes which enabled by means other than options. */
+#define PTRACE_EVENT_STOP 128
+
+/* Options set using PTRACE_SETOPTIONS or using PTRACE_SEIZE @data param */
+#define PTRACE_O_TRACESYSGOOD 1
+#define PTRACE_O_TRACEFORK (1 << PTRACE_EVENT_FORK)
+#define PTRACE_O_TRACEVFORK (1 << PTRACE_EVENT_VFORK)
+#define PTRACE_O_TRACECLONE (1 << PTRACE_EVENT_CLONE)
+#define PTRACE_O_TRACEEXEC (1 << PTRACE_EVENT_EXEC)
+#define PTRACE_O_TRACEVFORKDONE (1 << PTRACE_EVENT_VFORK_DONE)
+#define PTRACE_O_TRACEEXIT (1 << PTRACE_EVENT_EXIT)
+#define PTRACE_O_TRACESECCOMP (1 << PTRACE_EVENT_SECCOMP)
+
+#define PTRACE_O_MASK 0x000000ff
+
+#include <asm/ptrace.h>
+
+
+#endif /* _UAPI_LINUX_PTRACE_H */
diff --git a/include/linux/qnx4_fs.h b/include/uapi/linux/qnx4_fs.h
similarity index 100%
rename from include/linux/qnx4_fs.h
rename to include/uapi/linux/qnx4_fs.h
diff --git a/include/linux/qnxtypes.h b/include/uapi/linux/qnxtypes.h
similarity index 100%
rename from include/linux/qnxtypes.h
rename to include/uapi/linux/qnxtypes.h
diff --git a/include/uapi/linux/quota.h b/include/uapi/linux/quota.h
new file mode 100644
index 0000000..3b6cfbe
--- /dev/null
+++ b/include/uapi/linux/quota.h
@@ -0,0 +1,171 @@
+/*
+ * Copyright (c) 1982, 1986 Regents of the University of California.
+ * All rights reserved.
+ *
+ * This code is derived from software contributed to Berkeley by
+ * Robert Elz at The University of Melbourne.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the University nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#ifndef _UAPI_LINUX_QUOTA_
+#define _UAPI_LINUX_QUOTA_
+
+#include <linux/errno.h>
+#include <linux/types.h>
+
+#define __DQUOT_VERSION__ "dquot_6.5.2"
+
+#define MAXQUOTAS 2
+#define USRQUOTA 0 /* element used for user quotas */
+#define GRPQUOTA 1 /* element used for group quotas */
+
+/*
+ * Definitions for the default names of the quotas files.
+ */
+#define INITQFNAMES { \
+ "user", /* USRQUOTA */ \
+ "group", /* GRPQUOTA */ \
+ "undefined", \
+};
+
+/*
+ * Command definitions for the 'quotactl' system call.
+ * The commands are broken into a main command defined below
+ * and a subcommand that is used to convey the type of
+ * quota that is being manipulated (see above).
+ */
+#define SUBCMDMASK 0x00ff
+#define SUBCMDSHIFT 8
+#define QCMD(cmd, type) (((cmd) << SUBCMDSHIFT) | ((type) & SUBCMDMASK))
+
+#define Q_SYNC 0x800001 /* sync disk copy of a filesystems quotas */
+#define Q_QUOTAON 0x800002 /* turn quotas on */
+#define Q_QUOTAOFF 0x800003 /* turn quotas off */
+#define Q_GETFMT 0x800004 /* get quota format used on given filesystem */
+#define Q_GETINFO 0x800005 /* get information about quota files */
+#define Q_SETINFO 0x800006 /* set information about quota files */
+#define Q_GETQUOTA 0x800007 /* get user quota structure */
+#define Q_SETQUOTA 0x800008 /* set user quota structure */
+
+/* Quota format type IDs */
+#define QFMT_VFS_OLD 1
+#define QFMT_VFS_V0 2
+#define QFMT_OCFS2 3
+#define QFMT_VFS_V1 4
+
+/* Size of block in which space limits are passed through the quota
+ * interface */
+#define QIF_DQBLKSIZE_BITS 10
+#define QIF_DQBLKSIZE (1 << QIF_DQBLKSIZE_BITS)
+
+/*
+ * Quota structure used for communication with userspace via quotactl
+ * Following flags are used to specify which fields are valid
+ */
+enum {
+ QIF_BLIMITS_B = 0,
+ QIF_SPACE_B,
+ QIF_ILIMITS_B,
+ QIF_INODES_B,
+ QIF_BTIME_B,
+ QIF_ITIME_B,
+};
+
+#define QIF_BLIMITS (1 << QIF_BLIMITS_B)
+#define QIF_SPACE (1 << QIF_SPACE_B)
+#define QIF_ILIMITS (1 << QIF_ILIMITS_B)
+#define QIF_INODES (1 << QIF_INODES_B)
+#define QIF_BTIME (1 << QIF_BTIME_B)
+#define QIF_ITIME (1 << QIF_ITIME_B)
+#define QIF_LIMITS (QIF_BLIMITS | QIF_ILIMITS)
+#define QIF_USAGE (QIF_SPACE | QIF_INODES)
+#define QIF_TIMES (QIF_BTIME | QIF_ITIME)
+#define QIF_ALL (QIF_LIMITS | QIF_USAGE | QIF_TIMES)
+
+struct if_dqblk {
+ __u64 dqb_bhardlimit;
+ __u64 dqb_bsoftlimit;
+ __u64 dqb_curspace;
+ __u64 dqb_ihardlimit;
+ __u64 dqb_isoftlimit;
+ __u64 dqb_curinodes;
+ __u64 dqb_btime;
+ __u64 dqb_itime;
+ __u32 dqb_valid;
+};
+
+/*
+ * Structure used for setting quota information about file via quotactl
+ * Following flags are used to specify which fields are valid
+ */
+#define IIF_BGRACE 1
+#define IIF_IGRACE 2
+#define IIF_FLAGS 4
+#define IIF_ALL (IIF_BGRACE | IIF_IGRACE | IIF_FLAGS)
+
+struct if_dqinfo {
+ __u64 dqi_bgrace;
+ __u64 dqi_igrace;
+ __u32 dqi_flags;
+ __u32 dqi_valid;
+};
+
+/*
+ * Definitions for quota netlink interface
+ */
+#define QUOTA_NL_NOWARN 0
+#define QUOTA_NL_IHARDWARN 1 /* Inode hardlimit reached */
+#define QUOTA_NL_ISOFTLONGWARN 2 /* Inode grace time expired */
+#define QUOTA_NL_ISOFTWARN 3 /* Inode softlimit reached */
+#define QUOTA_NL_BHARDWARN 4 /* Block hardlimit reached */
+#define QUOTA_NL_BSOFTLONGWARN 5 /* Block grace time expired */
+#define QUOTA_NL_BSOFTWARN 6 /* Block softlimit reached */
+#define QUOTA_NL_IHARDBELOW 7 /* Usage got below inode hardlimit */
+#define QUOTA_NL_ISOFTBELOW 8 /* Usage got below inode softlimit */
+#define QUOTA_NL_BHARDBELOW 9 /* Usage got below block hardlimit */
+#define QUOTA_NL_BSOFTBELOW 10 /* Usage got below block softlimit */
+
+enum {
+ QUOTA_NL_C_UNSPEC,
+ QUOTA_NL_C_WARNING,
+ __QUOTA_NL_C_MAX,
+};
+#define QUOTA_NL_C_MAX (__QUOTA_NL_C_MAX - 1)
+
+enum {
+ QUOTA_NL_A_UNSPEC,
+ QUOTA_NL_A_QTYPE,
+ QUOTA_NL_A_EXCESS_ID,
+ QUOTA_NL_A_WARNING,
+ QUOTA_NL_A_DEV_MAJOR,
+ QUOTA_NL_A_DEV_MINOR,
+ QUOTA_NL_A_CAUSED_ID,
+ __QUOTA_NL_A_MAX,
+};
+#define QUOTA_NL_A_MAX (__QUOTA_NL_A_MAX - 1)
+
+
+#endif /* _UAPI_LINUX_QUOTA_ */
diff --git a/include/linux/radeonfb.h b/include/uapi/linux/radeonfb.h
similarity index 100%
rename from include/linux/radeonfb.h
rename to include/uapi/linux/radeonfb.h
diff --git a/include/uapi/linux/random.h b/include/uapi/linux/random.h
new file mode 100644
index 0000000..7471b5b
--- /dev/null
+++ b/include/uapi/linux/random.h
@@ -0,0 +1,50 @@
+/*
+ * include/linux/random.h
+ *
+ * Include file for the random number generator.
+ */
+
+#ifndef _UAPI_LINUX_RANDOM_H
+#define _UAPI_LINUX_RANDOM_H
+
+#include <linux/types.h>
+#include <linux/ioctl.h>
+#include <linux/irqnr.h>
+
+/* ioctl()'s for the random number generator */
+
+/* Get the entropy count. */
+#define RNDGETENTCNT _IOR( 'R', 0x00, int )
+
+/* Add to (or subtract from) the entropy count. (Superuser only.) */
+#define RNDADDTOENTCNT _IOW( 'R', 0x01, int )
+
+/* Get the contents of the entropy pool. (Superuser only.) */
+#define RNDGETPOOL _IOR( 'R', 0x02, int [2] )
+
+/*
+ * Write bytes into the entropy pool and add to the entropy count.
+ * (Superuser only.)
+ */
+#define RNDADDENTROPY _IOW( 'R', 0x03, int [2] )
+
+/* Clear entropy count to 0. (Superuser only.) */
+#define RNDZAPENTCNT _IO( 'R', 0x04 )
+
+/* Clear the entropy pool and associated counters. (Superuser only.) */
+#define RNDCLEARPOOL _IO( 'R', 0x06 )
+
+struct rand_pool_info {
+ int entropy_count;
+ int buf_size;
+ __u32 buf[0];
+};
+
+struct rnd_state {
+ __u32 s1, s2, s3;
+};
+
+/* Exported functions */
+
+
+#endif /* _UAPI_LINUX_RANDOM_H */
diff --git a/include/linux/raw.h b/include/uapi/linux/raw.h
similarity index 100%
rename from include/linux/raw.h
rename to include/uapi/linux/raw.h
diff --git a/include/linux/rds.h b/include/uapi/linux/rds.h
similarity index 100%
rename from include/linux/rds.h
rename to include/uapi/linux/rds.h
diff --git a/include/uapi/linux/reboot.h b/include/uapi/linux/reboot.h
new file mode 100644
index 0000000..09d056d
--- /dev/null
+++ b/include/uapi/linux/reboot.h
@@ -0,0 +1,39 @@
+#ifndef _UAPI_LINUX_REBOOT_H
+#define _UAPI_LINUX_REBOOT_H
+
+/*
+ * Magic values required to use _reboot() system call.
+ */
+
+#define LINUX_REBOOT_MAGIC1 0xfee1dead
+#define LINUX_REBOOT_MAGIC2 672274793
+#define LINUX_REBOOT_MAGIC2A 85072278
+#define LINUX_REBOOT_MAGIC2B 369367448
+#define LINUX_REBOOT_MAGIC2C 537993216
+
+
+/*
+ * Commands accepted by the _reboot() system call.
+ *
+ * RESTART Restart system using default command and mode.
+ * HALT Stop OS and give system control to ROM monitor, if any.
+ * CAD_ON Ctrl-Alt-Del sequence causes RESTART command.
+ * CAD_OFF Ctrl-Alt-Del sequence sends SIGINT to init task.
+ * POWER_OFF Stop OS and remove all power from system, if possible.
+ * RESTART2 Restart system using given command string.
+ * SW_SUSPEND Suspend system using software suspend if compiled in.
+ * KEXEC Restart system using a previously loaded Linux kernel
+ */
+
+#define LINUX_REBOOT_CMD_RESTART 0x01234567
+#define LINUX_REBOOT_CMD_HALT 0xCDEF0123
+#define LINUX_REBOOT_CMD_CAD_ON 0x89ABCDEF
+#define LINUX_REBOOT_CMD_CAD_OFF 0x00000000
+#define LINUX_REBOOT_CMD_POWER_OFF 0x4321FEDC
+#define LINUX_REBOOT_CMD_RESTART2 0xA1B2C3D4
+#define LINUX_REBOOT_CMD_SW_SUSPEND 0xD000FCE2
+#define LINUX_REBOOT_CMD_KEXEC 0x45584543
+
+
+
+#endif /* _UAPI_LINUX_REBOOT_H */
diff --git a/include/linux/reiserfs_fs.h b/include/uapi/linux/reiserfs_fs.h
similarity index 100%
rename from include/linux/reiserfs_fs.h
rename to include/uapi/linux/reiserfs_fs.h
diff --git a/include/linux/reiserfs_xattr.h b/include/uapi/linux/reiserfs_xattr.h
similarity index 100%
rename from include/linux/reiserfs_xattr.h
rename to include/uapi/linux/reiserfs_xattr.h
diff --git a/include/uapi/linux/resource.h b/include/uapi/linux/resource.h
new file mode 100644
index 0000000..e0ed284
--- /dev/null
+++ b/include/uapi/linux/resource.h
@@ -0,0 +1,80 @@
+#ifndef _UAPI_LINUX_RESOURCE_H
+#define _UAPI_LINUX_RESOURCE_H
+
+#include <linux/time.h>
+#include <linux/types.h>
+
+/*
+ * Resource control/accounting header file for linux
+ */
+
+/*
+ * Definition of struct rusage taken from BSD 4.3 Reno
+ *
+ * We don't support all of these yet, but we might as well have them....
+ * Otherwise, each time we add new items, programs which depend on this
+ * structure will lose. This reduces the chances of that happening.
+ */
+#define RUSAGE_SELF 0
+#define RUSAGE_CHILDREN (-1)
+#define RUSAGE_BOTH (-2) /* sys_wait4() uses this */
+#define RUSAGE_THREAD 1 /* only the calling thread */
+
+struct rusage {
+ struct timeval ru_utime; /* user time used */
+ struct timeval ru_stime; /* system time used */
+ long ru_maxrss; /* maximum resident set size */
+ long ru_ixrss; /* integral shared memory size */
+ long ru_idrss; /* integral unshared data size */
+ long ru_isrss; /* integral unshared stack size */
+ long ru_minflt; /* page reclaims */
+ long ru_majflt; /* page faults */
+ long ru_nswap; /* swaps */
+ long ru_inblock; /* block input operations */
+ long ru_oublock; /* block output operations */
+ long ru_msgsnd; /* messages sent */
+ long ru_msgrcv; /* messages received */
+ long ru_nsignals; /* signals received */
+ long ru_nvcsw; /* voluntary context switches */
+ long ru_nivcsw; /* involuntary " */
+};
+
+struct rlimit {
+ unsigned long rlim_cur;
+ unsigned long rlim_max;
+};
+
+#define RLIM64_INFINITY (~0ULL)
+
+struct rlimit64 {
+ __u64 rlim_cur;
+ __u64 rlim_max;
+};
+
+#define PRIO_MIN (-20)
+#define PRIO_MAX 20
+
+#define PRIO_PROCESS 0
+#define PRIO_PGRP 1
+#define PRIO_USER 2
+
+/*
+ * Limit the stack by to some sane default: root can always
+ * increase this limit if needed.. 8MB seems reasonable.
+ */
+#define _STK_LIM (8*1024*1024)
+
+/*
+ * GPG2 wants 64kB of mlocked memory, to make sure pass phrases
+ * and other sensitive information are never written to disk.
+ */
+#define MLOCK_LIMIT ((PAGE_SIZE > 64*1024) ? PAGE_SIZE : 64*1024)
+
+/*
+ * Due to binary compatibility, the actual resource numbers
+ * may be different for different linux versions..
+ */
+#include <asm/resource.h>
+
+
+#endif /* _UAPI_LINUX_RESOURCE_H */
diff --git a/include/uapi/linux/rfkill.h b/include/uapi/linux/rfkill.h
new file mode 100644
index 0000000..2753c6c
--- /dev/null
+++ b/include/uapi/linux/rfkill.h
@@ -0,0 +1,107 @@
+/*
+ * Copyright (C) 2006 - 2007 Ivo van Doorn
+ * Copyright (C) 2007 Dmitry Torokhov
+ * Copyright 2009 Johannes Berg <johannes@sipsolutions.net>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+#ifndef _UAPI__RFKILL_H
+#define _UAPI__RFKILL_H
+
+
+#include <linux/types.h>
+
+/* define userspace visible states */
+#define RFKILL_STATE_SOFT_BLOCKED 0
+#define RFKILL_STATE_UNBLOCKED 1
+#define RFKILL_STATE_HARD_BLOCKED 2
+
+/**
+ * enum rfkill_type - type of rfkill switch.
+ *
+ * @RFKILL_TYPE_ALL: toggles all switches (requests only - not a switch type)
+ * @RFKILL_TYPE_WLAN: switch is on a 802.11 wireless network device.
+ * @RFKILL_TYPE_BLUETOOTH: switch is on a bluetooth device.
+ * @RFKILL_TYPE_UWB: switch is on a ultra wideband device.
+ * @RFKILL_TYPE_WIMAX: switch is on a WiMAX device.
+ * @RFKILL_TYPE_WWAN: switch is on a wireless WAN device.
+ * @RFKILL_TYPE_GPS: switch is on a GPS device.
+ * @RFKILL_TYPE_FM: switch is on a FM radio device.
+ * @NUM_RFKILL_TYPES: number of defined rfkill types
+ */
+enum rfkill_type {
+ RFKILL_TYPE_ALL = 0,
+ RFKILL_TYPE_WLAN,
+ RFKILL_TYPE_BLUETOOTH,
+ RFKILL_TYPE_UWB,
+ RFKILL_TYPE_WIMAX,
+ RFKILL_TYPE_WWAN,
+ RFKILL_TYPE_GPS,
+ RFKILL_TYPE_FM,
+ NUM_RFKILL_TYPES,
+};
+
+/**
+ * enum rfkill_operation - operation types
+ * @RFKILL_OP_ADD: a device was added
+ * @RFKILL_OP_DEL: a device was removed
+ * @RFKILL_OP_CHANGE: a device's state changed -- userspace changes one device
+ * @RFKILL_OP_CHANGE_ALL: userspace changes all devices (of a type, or all)
+ */
+enum rfkill_operation {
+ RFKILL_OP_ADD = 0,
+ RFKILL_OP_DEL,
+ RFKILL_OP_CHANGE,
+ RFKILL_OP_CHANGE_ALL,
+};
+
+/**
+ * struct rfkill_event - events for userspace on /dev/rfkill
+ * @idx: index of dev rfkill
+ * @type: type of the rfkill struct
+ * @op: operation code
+ * @hard: hard state (0/1)
+ * @soft: soft state (0/1)
+ *
+ * Structure used for userspace communication on /dev/rfkill,
+ * used for events from the kernel and control to the kernel.
+ */
+struct rfkill_event {
+ __u32 idx;
+ __u8 type;
+ __u8 op;
+ __u8 soft, hard;
+} __attribute__((packed));
+
+/*
+ * We are planning to be backward and forward compatible with changes
+ * to the event struct, by adding new, optional, members at the end.
+ * When reading an event (whether the kernel from userspace or vice
+ * versa) we need to accept anything that's at least as large as the
+ * version 1 event size, but might be able to accept other sizes in
+ * the future.
+ *
+ * One exception is the kernel -- we already have two event sizes in
+ * that we've made the 'hard' member optional since our only option
+ * is to ignore it anyway.
+ */
+#define RFKILL_EVENT_SIZE_V1 8
+
+/* ioctl for turning off rfkill-input (if present) */
+#define RFKILL_IOC_MAGIC 'R'
+#define RFKILL_IOC_NOINPUT 1
+#define RFKILL_IOCTL_NOINPUT _IO(RFKILL_IOC_MAGIC, RFKILL_IOC_NOINPUT)
+
+/* and that's all userspace gets */
+
+#endif /* _UAPI__RFKILL_H */
diff --git a/include/linux/romfs_fs.h b/include/uapi/linux/romfs_fs.h
similarity index 100%
rename from include/linux/romfs_fs.h
rename to include/uapi/linux/romfs_fs.h
diff --git a/include/linux/rose.h b/include/uapi/linux/rose.h
similarity index 100%
rename from include/linux/rose.h
rename to include/uapi/linux/rose.h
diff --git a/include/linux/route.h b/include/uapi/linux/route.h
similarity index 100%
rename from include/linux/route.h
rename to include/uapi/linux/route.h
diff --git a/include/uapi/linux/rtc.h b/include/uapi/linux/rtc.h
new file mode 100644
index 0000000..f8c82e6
--- /dev/null
+++ b/include/uapi/linux/rtc.h
@@ -0,0 +1,107 @@
+/*
+ * Generic RTC interface.
+ * This version contains the part of the user interface to the Real Time Clock
+ * service. It is used with both the legacy mc146818 and also EFI
+ * Struct rtc_time and first 12 ioctl by Paul Gortmaker, 1996 - separated out
+ * from <linux/mc146818rtc.h> to this file for 2.4 kernels.
+ *
+ * Copyright (C) 1999 Hewlett-Packard Co.
+ * Copyright (C) 1999 Stephane Eranian <eranian@hpl.hp.com>
+ */
+#ifndef _UAPI_LINUX_RTC_H_
+#define _UAPI_LINUX_RTC_H_
+
+/*
+ * The struct used to pass data via the following ioctl. Similar to the
+ * struct tm in <time.h>, but it needs to be here so that the kernel
+ * source is self contained, allowing cross-compiles, etc. etc.
+ */
+
+struct rtc_time {
+ int tm_sec;
+ int tm_min;
+ int tm_hour;
+ int tm_mday;
+ int tm_mon;
+ int tm_year;
+ int tm_wday;
+ int tm_yday;
+ int tm_isdst;
+};
+
+/*
+ * This data structure is inspired by the EFI (v0.92) wakeup
+ * alarm API.
+ */
+struct rtc_wkalrm {
+ unsigned char enabled; /* 0 = alarm disabled, 1 = alarm enabled */
+ unsigned char pending; /* 0 = alarm not pending, 1 = alarm pending */
+ struct rtc_time time; /* time the alarm is set to */
+};
+
+/*
+ * Data structure to control PLL correction some better RTC feature
+ * pll_value is used to get or set current value of correction,
+ * the rest of the struct is used to query HW capabilities.
+ * This is modeled after the RTC used in Q40/Q60 computers but
+ * should be sufficiently flexible for other devices
+ *
+ * +ve pll_value means clock will run faster by
+ * pll_value*pll_posmult/pll_clock
+ * -ve pll_value means clock will run slower by
+ * pll_value*pll_negmult/pll_clock
+ */
+
+struct rtc_pll_info {
+ int pll_ctrl; /* placeholder for fancier control */
+ int pll_value; /* get/set correction value */
+ int pll_max; /* max +ve (faster) adjustment value */
+ int pll_min; /* max -ve (slower) adjustment value */
+ int pll_posmult; /* factor for +ve correction */
+ int pll_negmult; /* factor for -ve correction */
+ long pll_clock; /* base PLL frequency */
+};
+
+/*
+ * ioctl calls that are permitted to the /dev/rtc interface, if
+ * any of the RTC drivers are enabled.
+ */
+
+#define RTC_AIE_ON _IO('p', 0x01) /* Alarm int. enable on */
+#define RTC_AIE_OFF _IO('p', 0x02) /* ... off */
+#define RTC_UIE_ON _IO('p', 0x03) /* Update int. enable on */
+#define RTC_UIE_OFF _IO('p', 0x04) /* ... off */
+#define RTC_PIE_ON _IO('p', 0x05) /* Periodic int. enable on */
+#define RTC_PIE_OFF _IO('p', 0x06) /* ... off */
+#define RTC_WIE_ON _IO('p', 0x0f) /* Watchdog int. enable on */
+#define RTC_WIE_OFF _IO('p', 0x10) /* ... off */
+
+#define RTC_ALM_SET _IOW('p', 0x07, struct rtc_time) /* Set alarm time */
+#define RTC_ALM_READ _IOR('p', 0x08, struct rtc_time) /* Read alarm time */
+#define RTC_RD_TIME _IOR('p', 0x09, struct rtc_time) /* Read RTC time */
+#define RTC_SET_TIME _IOW('p', 0x0a, struct rtc_time) /* Set RTC time */
+#define RTC_IRQP_READ _IOR('p', 0x0b, unsigned long) /* Read IRQ rate */
+#define RTC_IRQP_SET _IOW('p', 0x0c, unsigned long) /* Set IRQ rate */
+#define RTC_EPOCH_READ _IOR('p', 0x0d, unsigned long) /* Read epoch */
+#define RTC_EPOCH_SET _IOW('p', 0x0e, unsigned long) /* Set epoch */
+
+#define RTC_WKALM_SET _IOW('p', 0x0f, struct rtc_wkalrm)/* Set wakeup alarm*/
+#define RTC_WKALM_RD _IOR('p', 0x10, struct rtc_wkalrm)/* Get wakeup alarm*/
+
+#define RTC_PLL_GET _IOR('p', 0x11, struct rtc_pll_info) /* Get PLL correction */
+#define RTC_PLL_SET _IOW('p', 0x12, struct rtc_pll_info) /* Set PLL correction */
+
+#define RTC_VL_READ _IOR('p', 0x13, int) /* Voltage low detector */
+#define RTC_VL_CLR _IO('p', 0x14) /* Clear voltage low information */
+
+/* interrupt flags */
+#define RTC_IRQF 0x80 /* Any of the following is active */
+#define RTC_PF 0x40 /* Periodic interrupt */
+#define RTC_AF 0x20 /* Alarm interrupt */
+#define RTC_UF 0x10 /* Update interrupt for 1Hz RTC */
+
+
+#define RTC_MAX_FREQ 8192
+
+
+#endif /* _UAPI_LINUX_RTC_H_ */
diff --git a/include/uapi/linux/rtnetlink.h b/include/uapi/linux/rtnetlink.h
new file mode 100644
index 0000000..fcd768b
--- /dev/null
+++ b/include/uapi/linux/rtnetlink.h
@@ -0,0 +1,612 @@
+#ifndef _UAPI__LINUX_RTNETLINK_H
+#define _UAPI__LINUX_RTNETLINK_H
+
+#include <linux/types.h>
+#include <linux/netlink.h>
+#include <linux/if_link.h>
+#include <linux/if_addr.h>
+#include <linux/neighbour.h>
+
+/* rtnetlink families. Values up to 127 are reserved for real address
+ * families, values above 128 may be used arbitrarily.
+ */
+#define RTNL_FAMILY_IPMR 128
+#define RTNL_FAMILY_IP6MR 129
+#define RTNL_FAMILY_MAX 129
+
+/****
+ * Routing/neighbour discovery messages.
+ ****/
+
+/* Types of messages */
+
+enum {
+ RTM_BASE = 16,
+#define RTM_BASE RTM_BASE
+
+ RTM_NEWLINK = 16,
+#define RTM_NEWLINK RTM_NEWLINK
+ RTM_DELLINK,
+#define RTM_DELLINK RTM_DELLINK
+ RTM_GETLINK,
+#define RTM_GETLINK RTM_GETLINK
+ RTM_SETLINK,
+#define RTM_SETLINK RTM_SETLINK
+
+ RTM_NEWADDR = 20,
+#define RTM_NEWADDR RTM_NEWADDR
+ RTM_DELADDR,
+#define RTM_DELADDR RTM_DELADDR
+ RTM_GETADDR,
+#define RTM_GETADDR RTM_GETADDR
+
+ RTM_NEWROUTE = 24,
+#define RTM_NEWROUTE RTM_NEWROUTE
+ RTM_DELROUTE,
+#define RTM_DELROUTE RTM_DELROUTE
+ RTM_GETROUTE,
+#define RTM_GETROUTE RTM_GETROUTE
+
+ RTM_NEWNEIGH = 28,
+#define RTM_NEWNEIGH RTM_NEWNEIGH
+ RTM_DELNEIGH,
+#define RTM_DELNEIGH RTM_DELNEIGH
+ RTM_GETNEIGH,
+#define RTM_GETNEIGH RTM_GETNEIGH
+
+ RTM_NEWRULE = 32,
+#define RTM_NEWRULE RTM_NEWRULE
+ RTM_DELRULE,
+#define RTM_DELRULE RTM_DELRULE
+ RTM_GETRULE,
+#define RTM_GETRULE RTM_GETRULE
+
+ RTM_NEWQDISC = 36,
+#define RTM_NEWQDISC RTM_NEWQDISC
+ RTM_DELQDISC,
+#define RTM_DELQDISC RTM_DELQDISC
+ RTM_GETQDISC,
+#define RTM_GETQDISC RTM_GETQDISC
+
+ RTM_NEWTCLASS = 40,
+#define RTM_NEWTCLASS RTM_NEWTCLASS
+ RTM_DELTCLASS,
+#define RTM_DELTCLASS RTM_DELTCLASS
+ RTM_GETTCLASS,
+#define RTM_GETTCLASS RTM_GETTCLASS
+
+ RTM_NEWTFILTER = 44,
+#define RTM_NEWTFILTER RTM_NEWTFILTER
+ RTM_DELTFILTER,
+#define RTM_DELTFILTER RTM_DELTFILTER
+ RTM_GETTFILTER,
+#define RTM_GETTFILTER RTM_GETTFILTER
+
+ RTM_NEWACTION = 48,
+#define RTM_NEWACTION RTM_NEWACTION
+ RTM_DELACTION,
+#define RTM_DELACTION RTM_DELACTION
+ RTM_GETACTION,
+#define RTM_GETACTION RTM_GETACTION
+
+ RTM_NEWPREFIX = 52,
+#define RTM_NEWPREFIX RTM_NEWPREFIX
+
+ RTM_GETMULTICAST = 58,
+#define RTM_GETMULTICAST RTM_GETMULTICAST
+
+ RTM_GETANYCAST = 62,
+#define RTM_GETANYCAST RTM_GETANYCAST
+
+ RTM_NEWNEIGHTBL = 64,
+#define RTM_NEWNEIGHTBL RTM_NEWNEIGHTBL
+ RTM_GETNEIGHTBL = 66,
+#define RTM_GETNEIGHTBL RTM_GETNEIGHTBL
+ RTM_SETNEIGHTBL,
+#define RTM_SETNEIGHTBL RTM_SETNEIGHTBL
+
+ RTM_NEWNDUSEROPT = 68,
+#define RTM_NEWNDUSEROPT RTM_NEWNDUSEROPT
+
+ RTM_NEWADDRLABEL = 72,
+#define RTM_NEWADDRLABEL RTM_NEWADDRLABEL
+ RTM_DELADDRLABEL,
+#define RTM_DELADDRLABEL RTM_DELADDRLABEL
+ RTM_GETADDRLABEL,
+#define RTM_GETADDRLABEL RTM_GETADDRLABEL
+
+ RTM_GETDCB = 78,
+#define RTM_GETDCB RTM_GETDCB
+ RTM_SETDCB,
+#define RTM_SETDCB RTM_SETDCB
+
+ __RTM_MAX,
+#define RTM_MAX (((__RTM_MAX + 3) & ~3) - 1)
+};
+
+#define RTM_NR_MSGTYPES (RTM_MAX + 1 - RTM_BASE)
+#define RTM_NR_FAMILIES (RTM_NR_MSGTYPES >> 2)
+#define RTM_FAM(cmd) (((cmd) - RTM_BASE) >> 2)
+
+/*
+ Generic structure for encapsulation of optional route information.
+ It is reminiscent of sockaddr, but with sa_family replaced
+ with attribute type.
+ */
+
+struct rtattr {
+ unsigned short rta_len;
+ unsigned short rta_type;
+};
+
+/* Macros to handle rtattributes */
+
+#define RTA_ALIGNTO 4
+#define RTA_ALIGN(len) ( ((len)+RTA_ALIGNTO-1) & ~(RTA_ALIGNTO-1) )
+#define RTA_OK(rta,len) ((len) >= (int)sizeof(struct rtattr) && \
+ (rta)->rta_len >= sizeof(struct rtattr) && \
+ (rta)->rta_len <= (len))
+#define RTA_NEXT(rta,attrlen) ((attrlen) -= RTA_ALIGN((rta)->rta_len), \
+ (struct rtattr*)(((char*)(rta)) + RTA_ALIGN((rta)->rta_len)))
+#define RTA_LENGTH(len) (RTA_ALIGN(sizeof(struct rtattr)) + (len))
+#define RTA_SPACE(len) RTA_ALIGN(RTA_LENGTH(len))
+#define RTA_DATA(rta) ((void*)(((char*)(rta)) + RTA_LENGTH(0)))
+#define RTA_PAYLOAD(rta) ((int)((rta)->rta_len) - RTA_LENGTH(0))
+
+
+
+
+/******************************************************************************
+ * Definitions used in routing table administration.
+ ****/
+
+struct rtmsg {
+ unsigned char rtm_family;
+ unsigned char rtm_dst_len;
+ unsigned char rtm_src_len;
+ unsigned char rtm_tos;
+
+ unsigned char rtm_table; /* Routing table id */
+ unsigned char rtm_protocol; /* Routing protocol; see below */
+ unsigned char rtm_scope; /* See below */
+ unsigned char rtm_type; /* See below */
+
+ unsigned rtm_flags;
+};
+
+/* rtm_type */
+
+enum {
+ RTN_UNSPEC,
+ RTN_UNICAST, /* Gateway or direct route */
+ RTN_LOCAL, /* Accept locally */
+ RTN_BROADCAST, /* Accept locally as broadcast,
+ send as broadcast */
+ RTN_ANYCAST, /* Accept locally as broadcast,
+ but send as unicast */
+ RTN_MULTICAST, /* Multicast route */
+ RTN_BLACKHOLE, /* Drop */
+ RTN_UNREACHABLE, /* Destination is unreachable */
+ RTN_PROHIBIT, /* Administratively prohibited */
+ RTN_THROW, /* Not in this table */
+ RTN_NAT, /* Translate this address */
+ RTN_XRESOLVE, /* Use external resolver */
+ __RTN_MAX
+};
+
+#define RTN_MAX (__RTN_MAX - 1)
+
+
+/* rtm_protocol */
+
+#define RTPROT_UNSPEC 0
+#define RTPROT_REDIRECT 1 /* Route installed by ICMP redirects;
+ not used by current IPv4 */
+#define RTPROT_KERNEL 2 /* Route installed by kernel */
+#define RTPROT_BOOT 3 /* Route installed during boot */
+#define RTPROT_STATIC 4 /* Route installed by administrator */
+
+/* Values of protocol >= RTPROT_STATIC are not interpreted by kernel;
+ they are just passed from user and back as is.
+ It will be used by hypothetical multiple routing daemons.
+ Note that protocol values should be standardized in order to
+ avoid conflicts.
+ */
+
+#define RTPROT_GATED 8 /* Apparently, GateD */
+#define RTPROT_RA 9 /* RDISC/ND router advertisements */
+#define RTPROT_MRT 10 /* Merit MRT */
+#define RTPROT_ZEBRA 11 /* Zebra */
+#define RTPROT_BIRD 12 /* BIRD */
+#define RTPROT_DNROUTED 13 /* DECnet routing daemon */
+#define RTPROT_XORP 14 /* XORP */
+#define RTPROT_NTK 15 /* Netsukuku */
+#define RTPROT_DHCP 16 /* DHCP client */
+
+/* rtm_scope
+
+ Really it is not scope, but sort of distance to the destination.
+ NOWHERE are reserved for not existing destinations, HOST is our
+ local addresses, LINK are destinations, located on directly attached
+ link and UNIVERSE is everywhere in the Universe.
+
+ Intermediate values are also possible f.e. interior routes
+ could be assigned a value between UNIVERSE and LINK.
+*/
+
+enum rt_scope_t {
+ RT_SCOPE_UNIVERSE=0,
+/* User defined values */
+ RT_SCOPE_SITE=200,
+ RT_SCOPE_LINK=253,
+ RT_SCOPE_HOST=254,
+ RT_SCOPE_NOWHERE=255
+};
+
+/* rtm_flags */
+
+#define RTM_F_NOTIFY 0x100 /* Notify user of route change */
+#define RTM_F_CLONED 0x200 /* This route is cloned */
+#define RTM_F_EQUALIZE 0x400 /* Multipath equalizer: NI */
+#define RTM_F_PREFIX 0x800 /* Prefix addresses */
+
+/* Reserved table identifiers */
+
+enum rt_class_t {
+ RT_TABLE_UNSPEC=0,
+/* User defined values */
+ RT_TABLE_COMPAT=252,
+ RT_TABLE_DEFAULT=253,
+ RT_TABLE_MAIN=254,
+ RT_TABLE_LOCAL=255,
+ RT_TABLE_MAX=0xFFFFFFFF
+};
+
+
+/* Routing message attributes */
+
+enum rtattr_type_t {
+ RTA_UNSPEC,
+ RTA_DST,
+ RTA_SRC,
+ RTA_IIF,
+ RTA_OIF,
+ RTA_GATEWAY,
+ RTA_PRIORITY,
+ RTA_PREFSRC,
+ RTA_METRICS,
+ RTA_MULTIPATH,
+ RTA_PROTOINFO, /* no longer used */
+ RTA_FLOW,
+ RTA_CACHEINFO,
+ RTA_SESSION, /* no longer used */
+ RTA_MP_ALGO, /* no longer used */
+ RTA_TABLE,
+ RTA_MARK,
+ __RTA_MAX
+};
+
+#define RTA_MAX (__RTA_MAX - 1)
+
+#define RTM_RTA(r) ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct rtmsg))))
+#define RTM_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct rtmsg))
+
+/* RTM_MULTIPATH --- array of struct rtnexthop.
+ *
+ * "struct rtnexthop" describes all necessary nexthop information,
+ * i.e. parameters of path to a destination via this nexthop.
+ *
+ * At the moment it is impossible to set different prefsrc, mtu, window
+ * and rtt for different paths from multipath.
+ */
+
+struct rtnexthop {
+ unsigned short rtnh_len;
+ unsigned char rtnh_flags;
+ unsigned char rtnh_hops;
+ int rtnh_ifindex;
+};
+
+/* rtnh_flags */
+
+#define RTNH_F_DEAD 1 /* Nexthop is dead (used by multipath) */
+#define RTNH_F_PERVASIVE 2 /* Do recursive gateway lookup */
+#define RTNH_F_ONLINK 4 /* Gateway is forced on link */
+
+/* Macros to handle hexthops */
+
+#define RTNH_ALIGNTO 4
+#define RTNH_ALIGN(len) ( ((len)+RTNH_ALIGNTO-1) & ~(RTNH_ALIGNTO-1) )
+#define RTNH_OK(rtnh,len) ((rtnh)->rtnh_len >= sizeof(struct rtnexthop) && \
+ ((int)(rtnh)->rtnh_len) <= (len))
+#define RTNH_NEXT(rtnh) ((struct rtnexthop*)(((char*)(rtnh)) + RTNH_ALIGN((rtnh)->rtnh_len)))
+#define RTNH_LENGTH(len) (RTNH_ALIGN(sizeof(struct rtnexthop)) + (len))
+#define RTNH_SPACE(len) RTNH_ALIGN(RTNH_LENGTH(len))
+#define RTNH_DATA(rtnh) ((struct rtattr*)(((char*)(rtnh)) + RTNH_LENGTH(0)))
+
+/* RTM_CACHEINFO */
+
+struct rta_cacheinfo {
+ __u32 rta_clntref;
+ __u32 rta_lastuse;
+ __s32 rta_expires;
+ __u32 rta_error;
+ __u32 rta_used;
+
+#define RTNETLINK_HAVE_PEERINFO 1
+ __u32 rta_id;
+ __u32 rta_ts;
+ __u32 rta_tsage;
+};
+
+/* RTM_METRICS --- array of struct rtattr with types of RTAX_* */
+
+enum {
+ RTAX_UNSPEC,
+#define RTAX_UNSPEC RTAX_UNSPEC
+ RTAX_LOCK,
+#define RTAX_LOCK RTAX_LOCK
+ RTAX_MTU,
+#define RTAX_MTU RTAX_MTU
+ RTAX_WINDOW,
+#define RTAX_WINDOW RTAX_WINDOW
+ RTAX_RTT,
+#define RTAX_RTT RTAX_RTT
+ RTAX_RTTVAR,
+#define RTAX_RTTVAR RTAX_RTTVAR
+ RTAX_SSTHRESH,
+#define RTAX_SSTHRESH RTAX_SSTHRESH
+ RTAX_CWND,
+#define RTAX_CWND RTAX_CWND
+ RTAX_ADVMSS,
+#define RTAX_ADVMSS RTAX_ADVMSS
+ RTAX_REORDERING,
+#define RTAX_REORDERING RTAX_REORDERING
+ RTAX_HOPLIMIT,
+#define RTAX_HOPLIMIT RTAX_HOPLIMIT
+ RTAX_INITCWND,
+#define RTAX_INITCWND RTAX_INITCWND
+ RTAX_FEATURES,
+#define RTAX_FEATURES RTAX_FEATURES
+ RTAX_RTO_MIN,
+#define RTAX_RTO_MIN RTAX_RTO_MIN
+ RTAX_INITRWND,
+#define RTAX_INITRWND RTAX_INITRWND
+ __RTAX_MAX
+};
+
+#define RTAX_MAX (__RTAX_MAX - 1)
+
+#define RTAX_FEATURE_ECN 0x00000001
+#define RTAX_FEATURE_SACK 0x00000002
+#define RTAX_FEATURE_TIMESTAMP 0x00000004
+#define RTAX_FEATURE_ALLFRAG 0x00000008
+
+struct rta_session {
+ __u8 proto;
+ __u8 pad1;
+ __u16 pad2;
+
+ union {
+ struct {
+ __u16 sport;
+ __u16 dport;
+ } ports;
+
+ struct {
+ __u8 type;
+ __u8 code;
+ __u16 ident;
+ } icmpt;
+
+ __u32 spi;
+ } u;
+};
+
+/****
+ * General form of address family dependent message.
+ ****/
+
+struct rtgenmsg {
+ unsigned char rtgen_family;
+};
+
+/*****************************************************************
+ * Link layer specific messages.
+ ****/
+
+/* struct ifinfomsg
+ * passes link level specific information, not dependent
+ * on network protocol.
+ */
+
+struct ifinfomsg {
+ unsigned char ifi_family;
+ unsigned char __ifi_pad;
+ unsigned short ifi_type; /* ARPHRD_* */
+ int ifi_index; /* Link index */
+ unsigned ifi_flags; /* IFF_* flags */
+ unsigned ifi_change; /* IFF_* change mask */
+};
+
+/********************************************************************
+ * prefix information
+ ****/
+
+struct prefixmsg {
+ unsigned char prefix_family;
+ unsigned char prefix_pad1;
+ unsigned short prefix_pad2;
+ int prefix_ifindex;
+ unsigned char prefix_type;
+ unsigned char prefix_len;
+ unsigned char prefix_flags;
+ unsigned char prefix_pad3;
+};
+
+enum
+{
+ PREFIX_UNSPEC,
+ PREFIX_ADDRESS,
+ PREFIX_CACHEINFO,
+ __PREFIX_MAX
+};
+
+#define PREFIX_MAX (__PREFIX_MAX - 1)
+
+struct prefix_cacheinfo {
+ __u32 preferred_time;
+ __u32 valid_time;
+};
+
+
+/*****************************************************************
+ * Traffic control messages.
+ ****/
+
+struct tcmsg {
+ unsigned char tcm_family;
+ unsigned char tcm__pad1;
+ unsigned short tcm__pad2;
+ int tcm_ifindex;
+ __u32 tcm_handle;
+ __u32 tcm_parent;
+ __u32 tcm_info;
+};
+
+enum {
+ TCA_UNSPEC,
+ TCA_KIND,
+ TCA_OPTIONS,
+ TCA_STATS,
+ TCA_XSTATS,
+ TCA_RATE,
+ TCA_FCNT,
+ TCA_STATS2,
+ TCA_STAB,
+ __TCA_MAX
+};
+
+#define TCA_MAX (__TCA_MAX - 1)
+
+#define TCA_RTA(r) ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct tcmsg))))
+#define TCA_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct tcmsg))
+
+/********************************************************************
+ * Neighbor Discovery userland options
+ ****/
+
+struct nduseroptmsg {
+ unsigned char nduseropt_family;
+ unsigned char nduseropt_pad1;
+ unsigned short nduseropt_opts_len; /* Total length of options */
+ int nduseropt_ifindex;
+ __u8 nduseropt_icmp_type;
+ __u8 nduseropt_icmp_code;
+ unsigned short nduseropt_pad2;
+ unsigned int nduseropt_pad3;
+ /* Followed by one or more ND options */
+};
+
+enum {
+ NDUSEROPT_UNSPEC,
+ NDUSEROPT_SRCADDR,
+ __NDUSEROPT_MAX
+};
+
+#define NDUSEROPT_MAX (__NDUSEROPT_MAX - 1)
+
+#ifndef __KERNEL__
+/* RTnetlink multicast groups - backwards compatibility for userspace */
+#define RTMGRP_LINK 1
+#define RTMGRP_NOTIFY 2
+#define RTMGRP_NEIGH 4
+#define RTMGRP_TC 8
+
+#define RTMGRP_IPV4_IFADDR 0x10
+#define RTMGRP_IPV4_MROUTE 0x20
+#define RTMGRP_IPV4_ROUTE 0x40
+#define RTMGRP_IPV4_RULE 0x80
+
+#define RTMGRP_IPV6_IFADDR 0x100
+#define RTMGRP_IPV6_MROUTE 0x200
+#define RTMGRP_IPV6_ROUTE 0x400
+#define RTMGRP_IPV6_IFINFO 0x800
+
+#define RTMGRP_DECnet_IFADDR 0x1000
+#define RTMGRP_DECnet_ROUTE 0x4000
+
+#define RTMGRP_IPV6_PREFIX 0x20000
+#endif
+
+/* RTnetlink multicast groups */
+enum rtnetlink_groups {
+ RTNLGRP_NONE,
+#define RTNLGRP_NONE RTNLGRP_NONE
+ RTNLGRP_LINK,
+#define RTNLGRP_LINK RTNLGRP_LINK
+ RTNLGRP_NOTIFY,
+#define RTNLGRP_NOTIFY RTNLGRP_NOTIFY
+ RTNLGRP_NEIGH,
+#define RTNLGRP_NEIGH RTNLGRP_NEIGH
+ RTNLGRP_TC,
+#define RTNLGRP_TC RTNLGRP_TC
+ RTNLGRP_IPV4_IFADDR,
+#define RTNLGRP_IPV4_IFADDR RTNLGRP_IPV4_IFADDR
+ RTNLGRP_IPV4_MROUTE,
+#define RTNLGRP_IPV4_MROUTE RTNLGRP_IPV4_MROUTE
+ RTNLGRP_IPV4_ROUTE,
+#define RTNLGRP_IPV4_ROUTE RTNLGRP_IPV4_ROUTE
+ RTNLGRP_IPV4_RULE,
+#define RTNLGRP_IPV4_RULE RTNLGRP_IPV4_RULE
+ RTNLGRP_IPV6_IFADDR,
+#define RTNLGRP_IPV6_IFADDR RTNLGRP_IPV6_IFADDR
+ RTNLGRP_IPV6_MROUTE,
+#define RTNLGRP_IPV6_MROUTE RTNLGRP_IPV6_MROUTE
+ RTNLGRP_IPV6_ROUTE,
+#define RTNLGRP_IPV6_ROUTE RTNLGRP_IPV6_ROUTE
+ RTNLGRP_IPV6_IFINFO,
+#define RTNLGRP_IPV6_IFINFO RTNLGRP_IPV6_IFINFO
+ RTNLGRP_DECnet_IFADDR,
+#define RTNLGRP_DECnet_IFADDR RTNLGRP_DECnet_IFADDR
+ RTNLGRP_NOP2,
+ RTNLGRP_DECnet_ROUTE,
+#define RTNLGRP_DECnet_ROUTE RTNLGRP_DECnet_ROUTE
+ RTNLGRP_DECnet_RULE,
+#define RTNLGRP_DECnet_RULE RTNLGRP_DECnet_RULE
+ RTNLGRP_NOP4,
+ RTNLGRP_IPV6_PREFIX,
+#define RTNLGRP_IPV6_PREFIX RTNLGRP_IPV6_PREFIX
+ RTNLGRP_IPV6_RULE,
+#define RTNLGRP_IPV6_RULE RTNLGRP_IPV6_RULE
+ RTNLGRP_ND_USEROPT,
+#define RTNLGRP_ND_USEROPT RTNLGRP_ND_USEROPT
+ RTNLGRP_PHONET_IFADDR,
+#define RTNLGRP_PHONET_IFADDR RTNLGRP_PHONET_IFADDR
+ RTNLGRP_PHONET_ROUTE,
+#define RTNLGRP_PHONET_ROUTE RTNLGRP_PHONET_ROUTE
+ RTNLGRP_DCB,
+#define RTNLGRP_DCB RTNLGRP_DCB
+ __RTNLGRP_MAX
+};
+#define RTNLGRP_MAX (__RTNLGRP_MAX - 1)
+
+/* TC action piece */
+struct tcamsg {
+ unsigned char tca_family;
+ unsigned char tca__pad1;
+ unsigned short tca__pad2;
+};
+#define TA_RTA(r) ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct tcamsg))))
+#define TA_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct tcamsg))
+#define TCA_ACT_TAB 1 /* attr type must be >=1 */
+#define TCAA_MAX 1
+
+/* New extended info filters for IFLA_EXT_MASK */
+#define RTEXT_FILTER_VF (1 << 0)
+
+/* End of information exported to user level */
+
+
+
+#endif /* _UAPI__LINUX_RTNETLINK_H */
diff --git a/include/uapi/linux/scc.h b/include/uapi/linux/scc.h
new file mode 100644
index 0000000..72b6b81
--- /dev/null
+++ b/include/uapi/linux/scc.h
@@ -0,0 +1,172 @@
+/* $Id: scc.h,v 1.29 1997/04/02 14:56:45 jreuter Exp jreuter $ */
+
+#ifndef _UAPI_SCC_H
+#define _UAPI_SCC_H
+
+
+/* selection of hardware types */
+
+#define PA0HZP 0x00 /* hardware type for PA0HZP SCC card and compatible */
+#define EAGLE 0x01 /* hardware type for EAGLE card */
+#define PC100 0x02 /* hardware type for PC100 card */
+#define PRIMUS 0x04 /* hardware type for PRIMUS-PC (DG9BL) card */
+#define DRSI 0x08 /* hardware type for DRSI PC*Packet card */
+#define BAYCOM 0x10 /* hardware type for BayCom (U)SCC */
+
+/* DEV ioctl() commands */
+
+enum SCC_ioctl_cmds {
+ SIOCSCCRESERVED = SIOCDEVPRIVATE,
+ SIOCSCCCFG,
+ SIOCSCCINI,
+ SIOCSCCCHANINI,
+ SIOCSCCSMEM,
+ SIOCSCCGKISS,
+ SIOCSCCSKISS,
+ SIOCSCCGSTAT,
+ SIOCSCCCAL
+};
+
+/* Device parameter control (from WAMPES) */
+
+enum L1_params {
+ PARAM_DATA,
+ PARAM_TXDELAY,
+ PARAM_PERSIST,
+ PARAM_SLOTTIME,
+ PARAM_TXTAIL,
+ PARAM_FULLDUP,
+ PARAM_SOFTDCD, /* was: PARAM_HW */
+ PARAM_MUTE, /* ??? */
+ PARAM_DTR,
+ PARAM_RTS,
+ PARAM_SPEED,
+ PARAM_ENDDELAY, /* ??? */
+ PARAM_GROUP,
+ PARAM_IDLE,
+ PARAM_MIN,
+ PARAM_MAXKEY,
+ PARAM_WAIT,
+ PARAM_MAXDEFER,
+ PARAM_TX,
+ PARAM_HWEVENT = 31,
+ PARAM_RETURN = 255 /* reset kiss mode */
+};
+
+/* fulldup parameter */
+
+enum FULLDUP_modes {
+ KISS_DUPLEX_HALF, /* normal CSMA operation */
+ KISS_DUPLEX_FULL, /* fullduplex, key down trx after transmission */
+ KISS_DUPLEX_LINK, /* fullduplex, key down trx after 'idletime' sec */
+ KISS_DUPLEX_OPTIMA /* fullduplex, let the protocol layer control the hw */
+};
+
+/* misc. parameters */
+
+#define TIMER_OFF 65535U /* to switch off timers */
+#define NO_SUCH_PARAM 65534U /* param not implemented */
+
+/* HWEVENT parameter */
+
+enum HWEVENT_opts {
+ HWEV_DCD_ON,
+ HWEV_DCD_OFF,
+ HWEV_ALL_SENT
+};
+
+/* channel grouping */
+
+#define RXGROUP 0100 /* if set, only tx when all channels clear */
+#define TXGROUP 0200 /* if set, don't transmit simultaneously */
+
+/* Tx/Rx clock sources */
+
+enum CLOCK_sources {
+ CLK_DPLL, /* normal halfduplex operation */
+ CLK_EXTERNAL, /* external clocking (G3RUH/DF9IC modems) */
+ CLK_DIVIDER, /* Rx = DPLL, Tx = divider (fullduplex with */
+ /* modems without clock regeneration */
+ CLK_BRG /* experimental fullduplex mode with DPLL/BRG for */
+ /* MODEMs without clock recovery */
+};
+
+/* Tx state */
+
+enum TX_state {
+ TXS_IDLE, /* Transmitter off, no data pending */
+ TXS_BUSY, /* waiting for permission to send / tailtime */
+ TXS_ACTIVE, /* Transmitter on, sending data */
+ TXS_NEWFRAME, /* reset CRC and send (next) frame */
+ TXS_IDLE2, /* Transmitter on, no data pending */
+ TXS_WAIT, /* Waiting for Mintime to expire */
+ TXS_TIMEOUT /* We had a transmission timeout */
+};
+
+typedef unsigned long io_port; /* type definition for an 'io port address' */
+
+/* SCC statistical information */
+
+struct scc_stat {
+ long rxints; /* Receiver interrupts */
+ long txints; /* Transmitter interrupts */
+ long exints; /* External/status interrupts */
+ long spints; /* Special receiver interrupts */
+
+ long txframes; /* Packets sent */
+ long rxframes; /* Number of Frames Actually Received */
+ long rxerrs; /* CRC Errors */
+ long txerrs; /* KISS errors */
+
+ unsigned int nospace; /* "Out of buffers" */
+ unsigned int rx_over; /* Receiver Overruns */
+ unsigned int tx_under; /* Transmitter Underruns */
+
+ unsigned int tx_state; /* Transmitter state */
+ int tx_queued; /* tx frames enqueued */
+
+ unsigned int maxqueue; /* allocated tx_buffers */
+ unsigned int bufsize; /* used buffersize */
+};
+
+struct scc_modem {
+ long speed; /* Line speed, bps */
+ char clocksrc; /* 0 = DPLL, 1 = external, 2 = divider */
+ char nrz; /* NRZ instead of NRZI */
+};
+
+struct scc_kiss_cmd {
+ int command; /* one of the KISS-Commands defined above */
+ unsigned param; /* KISS-Param */
+};
+
+struct scc_hw_config {
+ io_port data_a; /* data port channel A */
+ io_port ctrl_a; /* control port channel A */
+ io_port data_b; /* data port channel B */
+ io_port ctrl_b; /* control port channel B */
+ io_port vector_latch; /* INTACK-Latch (#) */
+ io_port special; /* special function port */
+
+ int irq; /* irq */
+ long clock; /* clock */
+ char option; /* command for function port */
+
+ char brand; /* hardware type */
+ char escc; /* use ext. features of a 8580/85180/85280 */
+};
+
+/* (#) only one INTACK latch allowed. */
+
+
+struct scc_mem_config {
+ unsigned int dummy;
+ unsigned int bufsize;
+};
+
+struct scc_calibrate {
+ unsigned int time;
+ unsigned char pattern;
+};
+
+#endif /* _UAPI_SCC_H */
diff --git a/include/uapi/linux/sched.h b/include/uapi/linux/sched.h
new file mode 100644
index 0000000..5a0f945
--- /dev/null
+++ b/include/uapi/linux/sched.h
@@ -0,0 +1,46 @@
+#ifndef _UAPI_LINUX_SCHED_H
+#define _UAPI_LINUX_SCHED_H
+
+/*
+ * cloning flags:
+ */
+#define CSIGNAL 0x000000ff /* signal mask to be sent at exit */
+#define CLONE_VM 0x00000100 /* set if VM shared between processes */
+#define CLONE_FS 0x00000200 /* set if fs info shared between processes */
+#define CLONE_FILES 0x00000400 /* set if open files shared between processes */
+#define CLONE_SIGHAND 0x00000800 /* set if signal handlers and blocked signals shared */
+#define CLONE_PTRACE 0x00002000 /* set if we want to let tracing continue on the child too */
+#define CLONE_VFORK 0x00004000 /* set if the parent wants the child to wake it up on mm_release */
+#define CLONE_PARENT 0x00008000 /* set if we want to have the same parent as the cloner */
+#define CLONE_THREAD 0x00010000 /* Same thread group? */
+#define CLONE_NEWNS 0x00020000 /* New namespace group? */
+#define CLONE_SYSVSEM 0x00040000 /* share system V SEM_UNDO semantics */
+#define CLONE_SETTLS 0x00080000 /* create a new TLS for the child */
+#define CLONE_PARENT_SETTID 0x00100000 /* set the TID in the parent */
+#define CLONE_CHILD_CLEARTID 0x00200000 /* clear the TID in the child */
+#define CLONE_DETACHED 0x00400000 /* Unused, ignored */
+#define CLONE_UNTRACED 0x00800000 /* set if the tracing process can't force CLONE_PTRACE on this clone */
+#define CLONE_CHILD_SETTID 0x01000000 /* set the TID in the child */
+/* 0x02000000 was previously the unused CLONE_STOPPED (Start in stopped state)
+ and is now available for re-use. */
+#define CLONE_NEWUTS 0x04000000 /* New utsname group? */
+#define CLONE_NEWIPC 0x08000000 /* New ipcs */
+#define CLONE_NEWUSER 0x10000000 /* New user namespace */
+#define CLONE_NEWPID 0x20000000 /* New pid namespace */
+#define CLONE_NEWNET 0x40000000 /* New network namespace */
+#define CLONE_IO 0x80000000 /* Clone io context */
+
+/*
+ * Scheduling policies
+ */
+#define SCHED_NORMAL 0
+#define SCHED_FIFO 1
+#define SCHED_RR 2
+#define SCHED_BATCH 3
+/* SCHED_ISO: reserved but not implemented yet */
+#define SCHED_IDLE 5
+/* Can be ORed in to make sure the process is reverted back to SCHED_NORMAL on fork */
+#define SCHED_RESET_ON_FORK 0x40000000
+
+
+#endif /* _UAPI_LINUX_SCHED_H */
diff --git a/include/uapi/linux/screen_info.h b/include/uapi/linux/screen_info.h
new file mode 100644
index 0000000..7530e74
--- /dev/null
+++ b/include/uapi/linux/screen_info.h
@@ -0,0 +1,74 @@
+#ifndef _UAPI_SCREEN_INFO_H
+#define _UAPI_SCREEN_INFO_H
+
+#include <linux/types.h>
+
+/*
+ * These are set up by the setup-routine at boot-time:
+ */
+
+struct screen_info {
+ __u8 orig_x; /* 0x00 */
+ __u8 orig_y; /* 0x01 */
+ __u16 ext_mem_k; /* 0x02 */
+ __u16 orig_video_page; /* 0x04 */
+ __u8 orig_video_mode; /* 0x06 */
+ __u8 orig_video_cols; /* 0x07 */
+ __u8 flags; /* 0x08 */
+ __u8 unused2; /* 0x09 */
+ __u16 orig_video_ega_bx;/* 0x0a */
+ __u16 unused3; /* 0x0c */
+ __u8 orig_video_lines; /* 0x0e */
+ __u8 orig_video_isVGA; /* 0x0f */
+ __u16 orig_video_points;/* 0x10 */
+
+ /* VESA graphic mode -- linear frame buffer */
+ __u16 lfb_width; /* 0x12 */
+ __u16 lfb_height; /* 0x14 */
+ __u16 lfb_depth; /* 0x16 */
+ __u32 lfb_base; /* 0x18 */
+ __u32 lfb_size; /* 0x1c */
+ __u16 cl_magic, cl_offset; /* 0x20 */
+ __u16 lfb_linelength; /* 0x24 */
+ __u8 red_size; /* 0x26 */
+ __u8 red_pos; /* 0x27 */
+ __u8 green_size; /* 0x28 */
+ __u8 green_pos; /* 0x29 */
+ __u8 blue_size; /* 0x2a */
+ __u8 blue_pos; /* 0x2b */
+ __u8 rsvd_size; /* 0x2c */
+ __u8 rsvd_pos; /* 0x2d */
+ __u16 vesapm_seg; /* 0x2e */
+ __u16 vesapm_off; /* 0x30 */
+ __u16 pages; /* 0x32 */
+ __u16 vesa_attributes; /* 0x34 */
+ __u32 capabilities; /* 0x36 */
+ __u8 _reserved[6]; /* 0x3a */
+} __attribute__((packed));
+
+#define VIDEO_TYPE_MDA 0x10 /* Monochrome Text Display */
+#define VIDEO_TYPE_CGA 0x11 /* CGA Display */
+#define VIDEO_TYPE_EGAM 0x20 /* EGA/VGA in Monochrome Mode */
+#define VIDEO_TYPE_EGAC 0x21 /* EGA in Color Mode */
+#define VIDEO_TYPE_VGAC 0x22 /* VGA+ in Color Mode */
+#define VIDEO_TYPE_VLFB 0x23 /* VESA VGA in graphic mode */
+
+#define VIDEO_TYPE_PICA_S3 0x30 /* ACER PICA-61 local S3 video */
+#define VIDEO_TYPE_MIPS_G364 0x31 /* MIPS Magnum 4000 G364 video */
+#define VIDEO_TYPE_SGI 0x33 /* Various SGI graphics hardware */
+
+#define VIDEO_TYPE_TGAC 0x40 /* DEC TGA */
+
+#define VIDEO_TYPE_SUN 0x50 /* Sun frame buffer. */
+#define VIDEO_TYPE_SUNPCI 0x51 /* Sun PCI based frame buffer. */
+
+#define VIDEO_TYPE_PMAC 0x60 /* PowerMacintosh frame buffer. */
+
+#define VIDEO_TYPE_EFI 0x70 /* EFI graphic mode */
+
+#define VIDEO_FLAGS_NOCURSOR (1 << 0) /* The video mode has no cursor set */
+
+#define VIDEO_CAPABILITY_SKIP_QUIRKS (1 << 0)
+
+
+#endif /* _UAPI_SCREEN_INFO_H */
diff --git a/include/uapi/linux/sdla.h b/include/uapi/linux/sdla.h
new file mode 100644
index 0000000..95eaff9
--- /dev/null
+++ b/include/uapi/linux/sdla.h
@@ -0,0 +1,116 @@
+/*
+ * INET An implementation of the TCP/IP protocol suite for the LINUX
+ * operating system. INET is implemented using the BSD Socket
+ * interface as the means of communication with the user level.
+ *
+ * Global definitions for the Frame relay interface.
+ *
+ * Version: @(#)if_ifrad.h 0.20 13 Apr 96
+ *
+ * Author: Mike McLagan <mike.mclagan@linux.org>
+ *
+ * Changes:
+ * 0.15 Mike McLagan Structure packing
+ *
+ * 0.20 Mike McLagan New flags for S508 buffer handling
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _UAPISDLA_H
+#define _UAPISDLA_H
+
+/* adapter type */
+#define SDLA_TYPES
+#define SDLA_S502A 5020
+#define SDLA_S502E 5021
+#define SDLA_S503 5030
+#define SDLA_S507 5070
+#define SDLA_S508 5080
+#define SDLA_S509 5090
+#define SDLA_UNKNOWN -1
+
+/* port selection flags for the S508 */
+#define SDLA_S508_PORT_V35 0x00
+#define SDLA_S508_PORT_RS232 0x02
+
+/* Z80 CPU speeds */
+#define SDLA_CPU_3M 0x00
+#define SDLA_CPU_5M 0x01
+#define SDLA_CPU_7M 0x02
+#define SDLA_CPU_8M 0x03
+#define SDLA_CPU_10M 0x04
+#define SDLA_CPU_16M 0x05
+#define SDLA_CPU_12M 0x06
+
+/* some private IOCTLs */
+#define SDLA_IDENTIFY (FRAD_LAST_IOCTL + 1)
+#define SDLA_CPUSPEED (FRAD_LAST_IOCTL + 2)
+#define SDLA_PROTOCOL (FRAD_LAST_IOCTL + 3)
+
+#define SDLA_CLEARMEM (FRAD_LAST_IOCTL + 4)
+#define SDLA_WRITEMEM (FRAD_LAST_IOCTL + 5)
+#define SDLA_READMEM (FRAD_LAST_IOCTL + 6)
+
+struct sdla_mem {
+ int addr;
+ int len;
+ void __user *data;
+};
+
+#define SDLA_START (FRAD_LAST_IOCTL + 7)
+#define SDLA_STOP (FRAD_LAST_IOCTL + 8)
+
+/* some offsets in the Z80's memory space */
+#define SDLA_NMIADDR 0x0000
+#define SDLA_CONF_ADDR 0x0010
+#define SDLA_S502A_NMIADDR 0x0066
+#define SDLA_CODE_BASEADDR 0x0100
+#define SDLA_WINDOW_SIZE 0x2000
+#define SDLA_ADDR_MASK 0x1FFF
+
+/* largest handleable block of data */
+#define SDLA_MAX_DATA 4080
+#define SDLA_MAX_MTU 4072 /* MAX_DATA - sizeof(fradhdr) */
+#define SDLA_MAX_DLCI 24
+
+/* this should be the same as frad_conf */
+struct sdla_conf {
+ short station;
+ short config;
+ short kbaud;
+ short clocking;
+ short max_frm;
+ short T391;
+ short T392;
+ short N391;
+ short N392;
+ short N393;
+ short CIR_fwd;
+ short Bc_fwd;
+ short Be_fwd;
+ short CIR_bwd;
+ short Bc_bwd;
+ short Be_bwd;
+};
+
+/* this should be the same as dlci_conf */
+struct sdla_dlci_conf {
+ short config;
+ short CIR_fwd;
+ short Bc_fwd;
+ short Be_fwd;
+ short CIR_bwd;
+ short Bc_bwd;
+ short Be_bwd;
+ short Tc_fwd;
+ short Tc_bwd;
+ short Tf_max;
+ short Tb_max;
+};
+
+
+#endif /* _UAPISDLA_H */
diff --git a/include/uapi/linux/seccomp.h b/include/uapi/linux/seccomp.h
new file mode 100644
index 0000000..ac2dc9f
--- /dev/null
+++ b/include/uapi/linux/seccomp.h
@@ -0,0 +1,47 @@
+#ifndef _UAPI_LINUX_SECCOMP_H
+#define _UAPI_LINUX_SECCOMP_H
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+
+
+/* Valid values for seccomp.mode and prctl(PR_SET_SECCOMP, <mode>) */
+#define SECCOMP_MODE_DISABLED 0 /* seccomp is not in use. */
+#define SECCOMP_MODE_STRICT 1 /* uses hard-coded filter. */
+#define SECCOMP_MODE_FILTER 2 /* uses user-supplied filter. */
+
+/*
+ * All BPF programs must return a 32-bit value.
+ * The bottom 16-bits are for optional return data.
+ * The upper 16-bits are ordered from least permissive values to most.
+ *
+ * The ordering ensures that a min_t() over composed return values always
+ * selects the least permissive choice.
+ */
+#define SECCOMP_RET_KILL 0x00000000U /* kill the task immediately */
+#define SECCOMP_RET_TRAP 0x00030000U /* disallow and force a SIGSYS */
+#define SECCOMP_RET_ERRNO 0x00050000U /* returns an errno */
+#define SECCOMP_RET_TRACE 0x7ff00000U /* pass to a tracer or disallow */
+#define SECCOMP_RET_ALLOW 0x7fff0000U /* allow */
+
+/* Masks for the return value sections. */
+#define SECCOMP_RET_ACTION 0x7fff0000U
+#define SECCOMP_RET_DATA 0x0000ffffU
+
+/**
+ * struct seccomp_data - the format the BPF program executes over.
+ * @nr: the system call number
+ * @arch: indicates system call convention as an AUDIT_ARCH_* value
+ * as defined in <linux/audit.h>.
+ * @instruction_pointer: at the time of the system call.
+ * @args: up to 6 system call arguments always stored as 64-bit values
+ * regardless of the architecture.
+ */
+struct seccomp_data {
+ int nr;
+ __u32 arch;
+ __u64 instruction_pointer;
+ __u64 args[6];
+};
+
+#endif /* _UAPI_LINUX_SECCOMP_H */
diff --git a/include/uapi/linux/securebits.h b/include/uapi/linux/securebits.h
new file mode 100644
index 0000000..985aac9
--- /dev/null
+++ b/include/uapi/linux/securebits.h
@@ -0,0 +1,51 @@
+#ifndef _UAPI_LINUX_SECUREBITS_H
+#define _UAPI_LINUX_SECUREBITS_H
+
+/* Each securesetting is implemented using two bits. One bit specifies
+ whether the setting is on or off. The other bit specify whether the
+ setting is locked or not. A setting which is locked cannot be
+ changed from user-level. */
+#define issecure_mask(X) (1 << (X))
+
+#define SECUREBITS_DEFAULT 0x00000000
+
+/* When set UID 0 has no special privileges. When unset, we support
+ inheritance of root-permissions and suid-root executable under
+ compatibility mode. We raise the effective and inheritable bitmasks
+ *of the executable file* if the effective uid of the new process is
+ 0. If the real uid is 0, we raise the effective (legacy) bit of the
+ executable file. */
+#define SECURE_NOROOT 0
+#define SECURE_NOROOT_LOCKED 1 /* make bit-0 immutable */
+
+#define SECBIT_NOROOT (issecure_mask(SECURE_NOROOT))
+#define SECBIT_NOROOT_LOCKED (issecure_mask(SECURE_NOROOT_LOCKED))
+
+/* When set, setuid to/from uid 0 does not trigger capability-"fixup".
+ When unset, to provide compatiblility with old programs relying on
+ set*uid to gain/lose privilege, transitions to/from uid 0 cause
+ capabilities to be gained/lost. */
+#define SECURE_NO_SETUID_FIXUP 2
+#define SECURE_NO_SETUID_FIXUP_LOCKED 3 /* make bit-2 immutable */
+
+#define SECBIT_NO_SETUID_FIXUP (issecure_mask(SECURE_NO_SETUID_FIXUP))
+#define SECBIT_NO_SETUID_FIXUP_LOCKED \
+ (issecure_mask(SECURE_NO_SETUID_FIXUP_LOCKED))
+
+/* When set, a process can retain its capabilities even after
+ transitioning to a non-root user (the set-uid fixup suppressed by
+ bit 2). Bit-4 is cleared when a process calls exec(); setting both
+ bit 4 and 5 will create a barrier through exec that no exec()'d
+ child can use this feature again. */
+#define SECURE_KEEP_CAPS 4
+#define SECURE_KEEP_CAPS_LOCKED 5 /* make bit-4 immutable */
+
+#define SECBIT_KEEP_CAPS (issecure_mask(SECURE_KEEP_CAPS))
+#define SECBIT_KEEP_CAPS_LOCKED (issecure_mask(SECURE_KEEP_CAPS_LOCKED))
+
+#define SECURE_ALL_BITS (issecure_mask(SECURE_NOROOT) | \
+ issecure_mask(SECURE_NO_SETUID_FIXUP) | \
+ issecure_mask(SECURE_KEEP_CAPS))
+#define SECURE_ALL_LOCKS (SECURE_ALL_BITS << 1)
+
+#endif /* _UAPI_LINUX_SECUREBITS_H */
diff --git a/include/linux/selinux_netlink.h b/include/uapi/linux/selinux_netlink.h
similarity index 100%
rename from include/linux/selinux_netlink.h
rename to include/uapi/linux/selinux_netlink.h
diff --git a/include/uapi/linux/sem.h b/include/uapi/linux/sem.h
new file mode 100644
index 0000000..541fce0
--- /dev/null
+++ b/include/uapi/linux/sem.h
@@ -0,0 +1,80 @@
+#ifndef _UAPI_LINUX_SEM_H
+#define _UAPI_LINUX_SEM_H
+
+#include <linux/ipc.h>
+
+/* semop flags */
+#define SEM_UNDO 0x1000 /* undo the operation on exit */
+
+/* semctl Command Definitions. */
+#define GETPID 11 /* get sempid */
+#define GETVAL 12 /* get semval */
+#define GETALL 13 /* get all semval's */
+#define GETNCNT 14 /* get semncnt */
+#define GETZCNT 15 /* get semzcnt */
+#define SETVAL 16 /* set semval */
+#define SETALL 17 /* set all semval's */
+
+/* ipcs ctl cmds */
+#define SEM_STAT 18
+#define SEM_INFO 19
+
+/* Obsolete, used only for backwards compatibility and libc5 compiles */
+struct semid_ds {
+ struct ipc_perm sem_perm; /* permissions .. see ipc.h */
+ __kernel_time_t sem_otime; /* last semop time */
+ __kernel_time_t sem_ctime; /* last change time */
+ struct sem *sem_base; /* ptr to first semaphore in array */
+ struct sem_queue *sem_pending; /* pending operations to be processed */
+ struct sem_queue **sem_pending_last; /* last pending operation */
+ struct sem_undo *undo; /* undo requests on this array */
+ unsigned short sem_nsems; /* no. of semaphores in array */
+};
+
+/* Include the definition of semid64_ds */
+#include <asm/sembuf.h>
+
+/* semop system calls takes an array of these. */
+struct sembuf {
+ unsigned short sem_num; /* semaphore index in array */
+ short sem_op; /* semaphore operation */
+ short sem_flg; /* operation flags */
+};
+
+/* arg for semctl system calls. */
+union semun {
+ int val; /* value for SETVAL */
+ struct semid_ds __user *buf; /* buffer for IPC_STAT & IPC_SET */
+ unsigned short __user *array; /* array for GETALL & SETALL */
+ struct seminfo __user *__buf; /* buffer for IPC_INFO */
+ void __user *__pad;
+};
+
+struct seminfo {
+ int semmap;
+ int semmni;
+ int semmns;
+ int semmnu;
+ int semmsl;
+ int semopm;
+ int semume;
+ int semusz;
+ int semvmx;
+ int semaem;
+};
+
+#define SEMMNI 128 /* <= IPCMNI max # of semaphore identifiers */
+#define SEMMSL 250 /* <= 8 000 max num of semaphores per id */
+#define SEMMNS (SEMMNI*SEMMSL) /* <= INT_MAX max # of semaphores in system */
+#define SEMOPM 32 /* <= 1 000 max num of ops per semop call */
+#define SEMVMX 32767 /* <= 32767 semaphore maximum value */
+#define SEMAEM SEMVMX /* adjust on exit max value */
+
+/* unused */
+#define SEMUME SEMOPM /* max num of undo entries per process */
+#define SEMMNU SEMMNS /* num of undo structures system wide */
+#define SEMMAP SEMMNS /* # of entries in semaphore map */
+#define SEMUSZ 20 /* sizeof struct sem_undo */
+
+
+#endif /* _UAPI_LINUX_SEM_H */
diff --git a/include/uapi/linux/serial.h b/include/uapi/linux/serial.h
new file mode 100644
index 0000000..5e0d0ed
--- /dev/null
+++ b/include/uapi/linux/serial.h
@@ -0,0 +1,126 @@
+/*
+ * include/linux/serial.h
+ *
+ * Copyright (C) 1992 by Theodore Ts'o.
+ *
+ * Redistribution of this file is permitted under the terms of the GNU
+ * Public License (GPL)
+ */
+
+#ifndef _UAPI_LINUX_SERIAL_H
+#define _UAPI_LINUX_SERIAL_H
+
+#include <linux/types.h>
+
+#include <linux/tty_flags.h>
+
+
+struct serial_struct {
+ int type;
+ int line;
+ unsigned int port;
+ int irq;
+ int flags;
+ int xmit_fifo_size;
+ int custom_divisor;
+ int baud_base;
+ unsigned short close_delay;
+ char io_type;
+ char reserved_char[1];
+ int hub6;
+ unsigned short closing_wait; /* time to wait before closing */
+ unsigned short closing_wait2; /* no longer used... */
+ unsigned char *iomem_base;
+ unsigned short iomem_reg_shift;
+ unsigned int port_high;
+ unsigned long iomap_base; /* cookie passed into ioremap */
+};
+
+/*
+ * For the close wait times, 0 means wait forever for serial port to
+ * flush its output. 65535 means don't wait at all.
+ */
+#define ASYNC_CLOSING_WAIT_INF 0
+#define ASYNC_CLOSING_WAIT_NONE 65535
+
+/*
+ * These are the supported serial types.
+ */
+#define PORT_UNKNOWN 0
+#define PORT_8250 1
+#define PORT_16450 2
+#define PORT_16550 3
+#define PORT_16550A 4
+#define PORT_CIRRUS 5 /* usurped by cyclades.c */
+#define PORT_16650 6
+#define PORT_16650V2 7
+#define PORT_16750 8
+#define PORT_STARTECH 9 /* usurped by cyclades.c */
+#define PORT_16C950 10 /* Oxford Semiconductor */
+#define PORT_16654 11
+#define PORT_16850 12
+#define PORT_RSA 13 /* RSA-DV II/S card */
+#define PORT_MAX 13
+
+#define SERIAL_IO_PORT 0
+#define SERIAL_IO_HUB6 1
+#define SERIAL_IO_MEM 2
+
+#define UART_CLEAR_FIFO 0x01
+#define UART_USE_FIFO 0x02
+#define UART_STARTECH 0x04
+#define UART_NATSEMI 0x08
+
+
+/*
+ * Multiport serial configuration structure --- external structure
+ */
+struct serial_multiport_struct {
+ int irq;
+ int port1;
+ unsigned char mask1, match1;
+ int port2;
+ unsigned char mask2, match2;
+ int port3;
+ unsigned char mask3, match3;
+ int port4;
+ unsigned char mask4, match4;
+ int port_monitor;
+ int reserved[32];
+};
+
+/*
+ * Serial input interrupt line counters -- external structure
+ * Four lines can interrupt: CTS, DSR, RI, DCD
+ */
+struct serial_icounter_struct {
+ int cts, dsr, rng, dcd;
+ int rx, tx;
+ int frame, overrun, parity, brk;
+ int buf_overrun;
+ int reserved[9];
+};
+
+/*
+ * Serial interface for controlling RS485 settings on chips with suitable
+ * support. Set with TIOCSRS485 and get with TIOCGRS485 if supported by your
+ * platform. The set function returns the new state, with any unsupported bits
+ * reverted appropriately.
+ */
+
+struct serial_rs485 {
+ __u32 flags; /* RS485 feature flags */
+#define SER_RS485_ENABLED (1 << 0) /* If enabled */
+#define SER_RS485_RTS_ON_SEND (1 << 1) /* Logical level for
+ RTS pin when
+ sending */
+#define SER_RS485_RTS_AFTER_SEND (1 << 2) /* Logical level for
+ RTS pin after sent*/
+#define SER_RS485_RX_DURING_TX (1 << 4)
+ __u32 delay_rts_before_send; /* Delay before send (milliseconds) */
+ __u32 delay_rts_after_send; /* Delay after send (milliseconds) */
+ __u32 padding[5]; /* Memory is cheap, new structs
+ are a royal PITA .. */
+};
+
+#endif /* _UAPI_LINUX_SERIAL_H */
diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h
new file mode 100644
index 0000000..7e1ab20
--- /dev/null
+++ b/include/uapi/linux/serial_core.h
@@ -0,0 +1,219 @@
+/*
+ * linux/drivers/char/serial_core.h
+ *
+ * Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef _UAPILINUX_SERIAL_CORE_H
+#define _UAPILINUX_SERIAL_CORE_H
+
+#include <linux/serial.h>
+
+/*
+ * The type definitions. These are from Ted Ts'o's serial.h
+ */
+#define PORT_UNKNOWN 0
+#define PORT_8250 1
+#define PORT_16450 2
+#define PORT_16550 3
+#define PORT_16550A 4
+#define PORT_CIRRUS 5
+#define PORT_16650 6
+#define PORT_16650V2 7
+#define PORT_16750 8
+#define PORT_STARTECH 9
+#define PORT_16C950 10
+#define PORT_16654 11
+#define PORT_16850 12
+#define PORT_RSA 13
+#define PORT_NS16550A 14
+#define PORT_XSCALE 15
+#define PORT_RM9000 16 /* PMC-Sierra RM9xxx internal UART */
+#define PORT_OCTEON 17 /* Cavium OCTEON internal UART */
+#define PORT_AR7 18 /* Texas Instruments AR7 internal UART */
+#define PORT_U6_16550A 19 /* ST-Ericsson U6xxx internal UART */
+#define PORT_TEGRA 20 /* NVIDIA Tegra internal UART */
+#define PORT_XR17D15X 21 /* Exar XR17D15x UART */
+#define PORT_LPC3220 22 /* NXP LPC32xx SoC "Standard" UART */
+#define PORT_8250_CIR 23 /* CIR infrared port, has its own driver */
+#define PORT_MAX_8250 23 /* max port ID */
+
+/*
+ * ARM specific type numbers. These are not currently guaranteed
+ * to be implemented, and will change in the future. These are
+ * separate so any additions to the old serial.c that occur before
+ * we are merged can be easily merged here.
+ */
+#define PORT_PXA 31
+#define PORT_AMBA 32
+#define PORT_CLPS711X 33
+#define PORT_SA1100 34
+#define PORT_UART00 35
+#define PORT_21285 37
+
+/* Sparc type numbers. */
+#define PORT_SUNZILOG 38
+#define PORT_SUNSAB 39
+
+/* DEC */
+#define PORT_DZ 46
+#define PORT_ZS 47
+
+/* Parisc type numbers. */
+#define PORT_MUX 48
+
+/* Atmel AT91 / AT32 SoC */
+#define PORT_ATMEL 49
+
+/* Macintosh Zilog type numbers */
+#define PORT_MAC_ZILOG 50 /* m68k : not yet implemented */
+#define PORT_PMAC_ZILOG 51
+
+/* SH-SCI */
+#define PORT_SCI 52
+#define PORT_SCIF 53
+#define PORT_IRDA 54
+
+/* Samsung S3C2410 SoC and derivatives thereof */
+#define PORT_S3C2410 55
+
+/* SGI IP22 aka Indy / Challenge S / Indigo 2 */
+#define PORT_IP22ZILOG 56
+
+/* Sharp LH7a40x -- an ARM9 SoC series */
+#define PORT_LH7A40X 57
+
+/* PPC CPM type number */
+#define PORT_CPM 58
+
+/* MPC52xx (and MPC512x) type numbers */
+#define PORT_MPC52xx 59
+
+/* IBM icom */
+#define PORT_ICOM 60
+
+/* Samsung S3C2440 SoC */
+#define PORT_S3C2440 61
+
+/* Motorola i.MX SoC */
+#define PORT_IMX 62
+
+/* Marvell MPSC */
+#define PORT_MPSC 63
+
+/* TXX9 type number */
+#define PORT_TXX9 64
+
+/* NEC VR4100 series SIU/DSIU */
+#define PORT_VR41XX_SIU 65
+#define PORT_VR41XX_DSIU 66
+
+/* Samsung S3C2400 SoC */
+#define PORT_S3C2400 67
+
+/* M32R SIO */
+#define PORT_M32R_SIO 68
+
+/*Digi jsm */
+#define PORT_JSM 69
+
+#define PORT_PNX8XXX 70
+
+/* Hilscher netx */
+#define PORT_NETX 71
+
+/* SUN4V Hypervisor Console */
+#define PORT_SUNHV 72
+
+#define PORT_S3C2412 73
+
+/* Xilinx uartlite */
+#define PORT_UARTLITE 74
+
+/* Blackfin bf5xx */
+#define PORT_BFIN 75
+
+/* Micrel KS8695 */
+#define PORT_KS8695 76
+
+/* Broadcom SB1250, etc. SOC */
+#define PORT_SB1250_DUART 77
+
+/* Freescale ColdFire */
+#define PORT_MCF 78
+
+/* Blackfin SPORT */
+#define PORT_BFIN_SPORT 79
+
+/* MN10300 on-chip UART numbers */
+#define PORT_MN10300 80
+#define PORT_MN10300_CTS 81
+
+#define PORT_SC26XX 82
+
+/* SH-SCI */
+#define PORT_SCIFA 83
+
+#define PORT_S3C6400 84
+
+/* NWPSERIAL */
+#define PORT_NWPSERIAL 85
+
+/* MAX3100 */
+#define PORT_MAX3100 86
+
+/* Timberdale UART */
+#define PORT_TIMBUART 87
+
+/* Qualcomm MSM SoCs */
+#define PORT_MSM 88
+
+/* BCM63xx family SoCs */
+#define PORT_BCM63XX 89
+
+/* Aeroflex Gaisler GRLIB APBUART */
+#define PORT_APBUART 90
+
+/* Altera UARTs */
+#define PORT_ALTERA_JTAGUART 91
+#define PORT_ALTERA_UART 92
+
+/* SH-SCI */
+#define PORT_SCIFB 93
+
+/* MAX310X */
+#define PORT_MAX310X 94
+
+/* High Speed UART for Medfield */
+#define PORT_MFD 95
+
+/* TI OMAP-UART */
+#define PORT_OMAP 96
+
+/* VIA VT8500 SoC */
+#define PORT_VT8500 97
+
+/* Xilinx PSS UART */
+#define PORT_XUARTPS 98
+
+/* Atheros AR933X SoC */
+#define PORT_AR933X 99
+
+/* Energy Micro efm32 SoC */
+#define PORT_EFMUART 100
+
+
+#endif /* _UAPILINUX_SERIAL_CORE_H */
diff --git a/include/linux/serial_reg.h b/include/uapi/linux/serial_reg.h
similarity index 100%
rename from include/linux/serial_reg.h
rename to include/uapi/linux/serial_reg.h
diff --git a/include/uapi/linux/serio.h b/include/uapi/linux/serio.h
new file mode 100644
index 0000000..9f53fa7
--- /dev/null
+++ b/include/uapi/linux/serio.h
@@ -0,0 +1,80 @@
+/*
+ * Copyright (C) 1999-2002 Vojtech Pavlik
+*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef _UAPI_SERIO_H
+#define _UAPI_SERIO_H
+
+
+#include <linux/ioctl.h>
+
+#define SPIOCSTYPE _IOW('q', 0x01, unsigned long)
+
+
+/*
+ * bit masks for use in "interrupt" flags (3rd argument)
+ */
+#define SERIO_TIMEOUT 1
+#define SERIO_PARITY 2
+#define SERIO_FRAME 4
+
+/*
+ * Serio types
+ */
+#define SERIO_XT 0x00
+#define SERIO_8042 0x01
+#define SERIO_RS232 0x02
+#define SERIO_HIL_MLC 0x03
+#define SERIO_PS_PSTHRU 0x05
+#define SERIO_8042_XL 0x06
+
+/*
+ * Serio protocols
+ */
+#define SERIO_UNKNOWN 0x00
+#define SERIO_MSC 0x01
+#define SERIO_SUN 0x02
+#define SERIO_MS 0x03
+#define SERIO_MP 0x04
+#define SERIO_MZ 0x05
+#define SERIO_MZP 0x06
+#define SERIO_MZPP 0x07
+#define SERIO_VSXXXAA 0x08
+#define SERIO_SUNKBD 0x10
+#define SERIO_WARRIOR 0x18
+#define SERIO_SPACEORB 0x19
+#define SERIO_MAGELLAN 0x1a
+#define SERIO_SPACEBALL 0x1b
+#define SERIO_GUNZE 0x1c
+#define SERIO_IFORCE 0x1d
+#define SERIO_STINGER 0x1e
+#define SERIO_NEWTON 0x1f
+#define SERIO_STOWAWAY 0x20
+#define SERIO_H3600 0x21
+#define SERIO_PS2SER 0x22
+#define SERIO_TWIDKBD 0x23
+#define SERIO_TWIDJOY 0x24
+#define SERIO_HIL 0x25
+#define SERIO_SNES232 0x26
+#define SERIO_SEMTECH 0x27
+#define SERIO_LKKBD 0x28
+#define SERIO_ELO 0x29
+#define SERIO_MICROTOUCH 0x30
+#define SERIO_PENMOUNT 0x31
+#define SERIO_TOUCHRIGHT 0x32
+#define SERIO_TOUCHWIN 0x33
+#define SERIO_TAOSEVM 0x34
+#define SERIO_FUJITSU 0x35
+#define SERIO_ZHENHUA 0x36
+#define SERIO_INEXIO 0x37
+#define SERIO_TOUCHIT213 0x38
+#define SERIO_W8001 0x39
+#define SERIO_DYNAPRO 0x3a
+#define SERIO_HAMPSHIRE 0x3b
+#define SERIO_PS2MULT 0x3c
+#define SERIO_TSC40 0x3d
+
+#endif /* _UAPI_SERIO_H */
diff --git a/include/uapi/linux/shm.h b/include/uapi/linux/shm.h
new file mode 100644
index 0000000..ec36fa1
--- /dev/null
+++ b/include/uapi/linux/shm.h
@@ -0,0 +1,79 @@
+#ifndef _UAPI_LINUX_SHM_H_
+#define _UAPI_LINUX_SHM_H_
+
+#include <linux/ipc.h>
+#include <linux/errno.h>
+#ifndef __KERNEL__
+#include <unistd.h>
+#endif
+
+/*
+ * SHMMAX, SHMMNI and SHMALL are upper limits are defaults which can
+ * be increased by sysctl
+ */
+
+#define SHMMAX 0x2000000 /* max shared seg size (bytes) */
+#define SHMMIN 1 /* min shared seg size (bytes) */
+#define SHMMNI 4096 /* max num of segs system wide */
+#ifndef __KERNEL__
+#define SHMALL (SHMMAX/getpagesize()*(SHMMNI/16))
+#endif
+#define SHMSEG SHMMNI /* max shared segs per process */
+
+
+/* Obsolete, used only for backwards compatibility and libc5 compiles */
+struct shmid_ds {
+ struct ipc_perm shm_perm; /* operation perms */
+ int shm_segsz; /* size of segment (bytes) */
+ __kernel_time_t shm_atime; /* last attach time */
+ __kernel_time_t shm_dtime; /* last detach time */
+ __kernel_time_t shm_ctime; /* last change time */
+ __kernel_ipc_pid_t shm_cpid; /* pid of creator */
+ __kernel_ipc_pid_t shm_lpid; /* pid of last operator */
+ unsigned short shm_nattch; /* no. of current attaches */
+ unsigned short shm_unused; /* compatibility */
+ void *shm_unused2; /* ditto - used by DIPC */
+ void *shm_unused3; /* unused */
+};
+
+/* Include the definition of shmid64_ds and shminfo64 */
+#include <asm/shmbuf.h>
+
+/* permission flag for shmget */
+#define SHM_R 0400 /* or S_IRUGO from <linux/stat.h> */
+#define SHM_W 0200 /* or S_IWUGO from <linux/stat.h> */
+
+/* mode for attach */
+#define SHM_RDONLY 010000 /* read-only access */
+#define SHM_RND 020000 /* round attach address to SHMLBA boundary */
+#define SHM_REMAP 040000 /* take-over region on attach */
+#define SHM_EXEC 0100000 /* execution access */
+
+/* super user shmctl commands */
+#define SHM_LOCK 11
+#define SHM_UNLOCK 12
+
+/* ipcs ctl commands */
+#define SHM_STAT 13
+#define SHM_INFO 14
+
+/* Obsolete, used only for backwards compatibility */
+struct shminfo {
+ int shmmax;
+ int shmmin;
+ int shmmni;
+ int shmseg;
+ int shmall;
+};
+
+struct shm_info {
+ int used_ids;
+ unsigned long shm_tot; /* total allocated shm */
+ unsigned long shm_rss; /* total resident shm */
+ unsigned long shm_swp; /* total swapped shm */
+ unsigned long swap_attempts;
+ unsigned long swap_successes;
+};
+
+
+#endif /* _UAPI_LINUX_SHM_H_ */
diff --git a/include/uapi/linux/signal.h b/include/uapi/linux/signal.h
new file mode 100644
index 0000000..dff452e
--- /dev/null
+++ b/include/uapi/linux/signal.h
@@ -0,0 +1,8 @@
+#ifndef _UAPI_LINUX_SIGNAL_H
+#define _UAPI_LINUX_SIGNAL_H
+
+#include <asm/signal.h>
+#include <asm/siginfo.h>
+
+
+#endif /* _UAPI_LINUX_SIGNAL_H */
diff --git a/include/uapi/linux/signalfd.h b/include/uapi/linux/signalfd.h
new file mode 100644
index 0000000..492c6de
--- /dev/null
+++ b/include/uapi/linux/signalfd.h
@@ -0,0 +1,52 @@
+/*
+ * include/linux/signalfd.h
+ *
+ * Copyright (C) 2007 Davide Libenzi <davidel@xmailserver.org>
+ *
+ */
+
+#ifndef _UAPI_LINUX_SIGNALFD_H
+#define _UAPI_LINUX_SIGNALFD_H
+
+#include <linux/types.h>
+/* For O_CLOEXEC and O_NONBLOCK */
+#include <linux/fcntl.h>
+
+/* Flags for signalfd4. */
+#define SFD_CLOEXEC O_CLOEXEC
+#define SFD_NONBLOCK O_NONBLOCK
+
+struct signalfd_siginfo {
+ __u32 ssi_signo;
+ __s32 ssi_errno;
+ __s32 ssi_code;
+ __u32 ssi_pid;
+ __u32 ssi_uid;
+ __s32 ssi_fd;
+ __u32 ssi_tid;
+ __u32 ssi_band;
+ __u32 ssi_overrun;
+ __u32 ssi_trapno;
+ __s32 ssi_status;
+ __s32 ssi_int;
+ __u64 ssi_ptr;
+ __u64 ssi_utime;
+ __u64 ssi_stime;
+ __u64 ssi_addr;
+ __u16 ssi_addr_lsb;
+
+ /*
+ * Pad strcture to 128 bytes. Remember to update the
+ * pad size when you add new members. We use a fixed
+ * size structure to avoid compatibility problems with
+ * future versions, and we leave extra space for additional
+ * members. We use fixed size members because this strcture
+ * comes out of a read(2) and we really don't want to have
+ * a compat on read(2).
+ */
+ __u8 __pad[46];
+};
+
+
+
+#endif /* _UAPI_LINUX_SIGNALFD_H */
diff --git a/include/linux/snmp.h b/include/uapi/linux/snmp.h
similarity index 100%
rename from include/linux/snmp.h
rename to include/uapi/linux/snmp.h
diff --git a/include/uapi/linux/sock_diag.h b/include/uapi/linux/sock_diag.h
new file mode 100644
index 0000000..b00e29e
--- /dev/null
+++ b/include/uapi/linux/sock_diag.h
@@ -0,0 +1,26 @@
+#ifndef _UAPI__SOCK_DIAG_H__
+#define _UAPI__SOCK_DIAG_H__
+
+#include <linux/types.h>
+
+#define SOCK_DIAG_BY_FAMILY 20
+
+struct sock_diag_req {
+ __u8 sdiag_family;
+ __u8 sdiag_protocol;
+};
+
+enum {
+ SK_MEMINFO_RMEM_ALLOC,
+ SK_MEMINFO_RCVBUF,
+ SK_MEMINFO_WMEM_ALLOC,
+ SK_MEMINFO_SNDBUF,
+ SK_MEMINFO_FWD_ALLOC,
+ SK_MEMINFO_WMEM_QUEUED,
+ SK_MEMINFO_OPTMEM,
+ SK_MEMINFO_BACKLOG,
+
+ SK_MEMINFO_VARS,
+};
+
+#endif /* _UAPI__SOCK_DIAG_H__ */
diff --git a/include/uapi/linux/socket.h b/include/uapi/linux/socket.h
new file mode 100644
index 0000000..76ab0c6
--- /dev/null
+++ b/include/uapi/linux/socket.h
@@ -0,0 +1,21 @@
+#ifndef _UAPI_LINUX_SOCKET_H
+#define _UAPI_LINUX_SOCKET_H
+
+/*
+ * Desired design of maximum size and alignment (see RFC2553)
+ */
+#define _K_SS_MAXSIZE 128 /* Implementation specific max size */
+#define _K_SS_ALIGNSIZE (__alignof__ (struct sockaddr *))
+ /* Implementation specific desired alignment */
+
+typedef unsigned short __kernel_sa_family_t;
+
+struct __kernel_sockaddr_storage {
+ __kernel_sa_family_t ss_family; /* address family */
+ /* Following field(s) are implementation specific */
+ char __data[_K_SS_MAXSIZE - sizeof(unsigned short)];
+ /* space to achieve desired size, */
+ /* _SS_MAXSIZE value minus size of ss_family */
+} __attribute__ ((aligned(_K_SS_ALIGNSIZE))); /* force desired alignment */
+
+#endif /* _UAPI_LINUX_SOCKET_H */
diff --git a/include/linux/sockios.h b/include/uapi/linux/sockios.h
similarity index 100%
rename from include/linux/sockios.h
rename to include/uapi/linux/sockios.h
diff --git a/include/linux/som.h b/include/uapi/linux/som.h
similarity index 100%
rename from include/linux/som.h
rename to include/uapi/linux/som.h
diff --git a/include/uapi/linux/sonet.h b/include/uapi/linux/sonet.h
new file mode 100644
index 0000000..cc54ace
--- /dev/null
+++ b/include/uapi/linux/sonet.h
@@ -0,0 +1,60 @@
+/* sonet.h - SONET/SHD physical layer control */
+
+/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */
+
+
+#ifndef _UAPILINUX_SONET_H
+#define _UAPILINUX_SONET_H
+
+#define __SONET_ITEMS \
+ __HANDLE_ITEM(section_bip); /* section parity errors (B1) */ \
+ __HANDLE_ITEM(line_bip); /* line parity errors (B2) */ \
+ __HANDLE_ITEM(path_bip); /* path parity errors (B3) */ \
+ __HANDLE_ITEM(line_febe); /* line parity errors at remote */ \
+ __HANDLE_ITEM(path_febe); /* path parity errors at remote */ \
+ __HANDLE_ITEM(corr_hcs); /* correctable header errors */ \
+ __HANDLE_ITEM(uncorr_hcs); /* uncorrectable header errors */ \
+ __HANDLE_ITEM(tx_cells); /* cells sent */ \
+ __HANDLE_ITEM(rx_cells); /* cells received */
+
+struct sonet_stats {
+#define __HANDLE_ITEM(i) int i
+ __SONET_ITEMS
+#undef __HANDLE_ITEM
+} __attribute__ ((packed));
+
+
+#define SONET_GETSTAT _IOR('a',ATMIOC_PHYTYP,struct sonet_stats)
+ /* get statistics */
+#define SONET_GETSTATZ _IOR('a',ATMIOC_PHYTYP+1,struct sonet_stats)
+ /* ... and zero counters */
+#define SONET_SETDIAG _IOWR('a',ATMIOC_PHYTYP+2,int)
+ /* set error insertion */
+#define SONET_CLRDIAG _IOWR('a',ATMIOC_PHYTYP+3,int)
+ /* clear error insertion */
+#define SONET_GETDIAG _IOR('a',ATMIOC_PHYTYP+4,int)
+ /* query error insertion */
+#define SONET_SETFRAMING _IOW('a',ATMIOC_PHYTYP+5,int)
+ /* set framing mode (SONET/SDH) */
+#define SONET_GETFRAMING _IOR('a',ATMIOC_PHYTYP+6,int)
+ /* get framing mode */
+#define SONET_GETFRSENSE _IOR('a',ATMIOC_PHYTYP+7, \
+ unsigned char[SONET_FRSENSE_SIZE]) /* get framing sense information */
+
+#define SONET_INS_SBIP 1 /* section BIP */
+#define SONET_INS_LBIP 2 /* line BIP */
+#define SONET_INS_PBIP 4 /* path BIP */
+#define SONET_INS_FRAME 8 /* out of frame */
+#define SONET_INS_LOS 16 /* set line to zero */
+#define SONET_INS_LAIS 32 /* line alarm indication signal */
+#define SONET_INS_PAIS 64 /* path alarm indication signal */
+#define SONET_INS_HCS 128 /* insert HCS error */
+
+#define SONET_FRAME_SONET 0 /* SONET STS-3 framing */
+#define SONET_FRAME_SDH 1 /* SDH STM-1 framing */
+
+#define SONET_FRSENSE_SIZE 6 /* C1[3],H1[3] (0xff for unknown) */
+
+
+
+#endif /* _UAPILINUX_SONET_H */
diff --git a/include/uapi/linux/sonypi.h b/include/uapi/linux/sonypi.h
new file mode 100644
index 0000000..85078a2
--- /dev/null
+++ b/include/uapi/linux/sonypi.h
@@ -0,0 +1,146 @@
+/*
+ * Sony Programmable I/O Control Device driver for VAIO
+ *
+ * Copyright (C) 2001-2005 Stelian Pop <stelian@popies.net>
+ *
+ * Copyright (C) 2005 Narayanan R S <nars@kadamba.org>
+
+ * Copyright (C) 2001-2002 Alcôve <www.alcove.com>
+ *
+ * Copyright (C) 2001 Michael Ashley <m.ashley@unsw.edu.au>
+ *
+ * Copyright (C) 2001 Junichi Morita <jun1m@mars.dti.ne.jp>
+ *
+ * Copyright (C) 2000 Takaya Kinjo <t-kinjo@tc4.so-net.ne.jp>
+ *
+ * Copyright (C) 2000 Andrew Tridgell <tridge@valinux.com>
+ *
+ * Earlier work by Werner Almesberger, Paul `Rusty' Russell and Paul Mackerras.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#ifndef _UAPI_SONYPI_H_
+#define _UAPI_SONYPI_H_
+
+#include <linux/types.h>
+
+/* events the user application reading /dev/sonypi can use */
+
+#define SONYPI_EVENT_IGNORE 0
+#define SONYPI_EVENT_JOGDIAL_DOWN 1
+#define SONYPI_EVENT_JOGDIAL_UP 2
+#define SONYPI_EVENT_JOGDIAL_DOWN_PRESSED 3
+#define SONYPI_EVENT_JOGDIAL_UP_PRESSED 4
+#define SONYPI_EVENT_JOGDIAL_PRESSED 5
+#define SONYPI_EVENT_JOGDIAL_RELEASED 6 /* obsolete */
+#define SONYPI_EVENT_CAPTURE_PRESSED 7
+#define SONYPI_EVENT_CAPTURE_RELEASED 8 /* obsolete */
+#define SONYPI_EVENT_CAPTURE_PARTIALPRESSED 9
+#define SONYPI_EVENT_CAPTURE_PARTIALRELEASED 10
+#define SONYPI_EVENT_FNKEY_ESC 11
+#define SONYPI_EVENT_FNKEY_F1 12
+#define SONYPI_EVENT_FNKEY_F2 13
+#define SONYPI_EVENT_FNKEY_F3 14
+#define SONYPI_EVENT_FNKEY_F4 15
+#define SONYPI_EVENT_FNKEY_F5 16
+#define SONYPI_EVENT_FNKEY_F6 17
+#define SONYPI_EVENT_FNKEY_F7 18
+#define SONYPI_EVENT_FNKEY_F8 19
+#define SONYPI_EVENT_FNKEY_F9 20
+#define SONYPI_EVENT_FNKEY_F10 21
+#define SONYPI_EVENT_FNKEY_F11 22
+#define SONYPI_EVENT_FNKEY_F12 23
+#define SONYPI_EVENT_FNKEY_1 24
+#define SONYPI_EVENT_FNKEY_2 25
+#define SONYPI_EVENT_FNKEY_D 26
+#define SONYPI_EVENT_FNKEY_E 27
+#define SONYPI_EVENT_FNKEY_F 28
+#define SONYPI_EVENT_FNKEY_S 29
+#define SONYPI_EVENT_FNKEY_B 30
+#define SONYPI_EVENT_BLUETOOTH_PRESSED 31
+#define SONYPI_EVENT_PKEY_P1 32
+#define SONYPI_EVENT_PKEY_P2 33
+#define SONYPI_EVENT_PKEY_P3 34
+#define SONYPI_EVENT_BACK_PRESSED 35
+#define SONYPI_EVENT_LID_CLOSED 36
+#define SONYPI_EVENT_LID_OPENED 37
+#define SONYPI_EVENT_BLUETOOTH_ON 38
+#define SONYPI_EVENT_BLUETOOTH_OFF 39
+#define SONYPI_EVENT_HELP_PRESSED 40
+#define SONYPI_EVENT_FNKEY_ONLY 41
+#define SONYPI_EVENT_JOGDIAL_FAST_DOWN 42
+#define SONYPI_EVENT_JOGDIAL_FAST_UP 43
+#define SONYPI_EVENT_JOGDIAL_FAST_DOWN_PRESSED 44
+#define SONYPI_EVENT_JOGDIAL_FAST_UP_PRESSED 45
+#define SONYPI_EVENT_JOGDIAL_VFAST_DOWN 46
+#define SONYPI_EVENT_JOGDIAL_VFAST_UP 47
+#define SONYPI_EVENT_JOGDIAL_VFAST_DOWN_PRESSED 48
+#define SONYPI_EVENT_JOGDIAL_VFAST_UP_PRESSED 49
+#define SONYPI_EVENT_ZOOM_PRESSED 50
+#define SONYPI_EVENT_THUMBPHRASE_PRESSED 51
+#define SONYPI_EVENT_MEYE_FACE 52
+#define SONYPI_EVENT_MEYE_OPPOSITE 53
+#define SONYPI_EVENT_MEMORYSTICK_INSERT 54
+#define SONYPI_EVENT_MEMORYSTICK_EJECT 55
+#define SONYPI_EVENT_ANYBUTTON_RELEASED 56
+#define SONYPI_EVENT_BATTERY_INSERT 57
+#define SONYPI_EVENT_BATTERY_REMOVE 58
+#define SONYPI_EVENT_FNKEY_RELEASED 59
+#define SONYPI_EVENT_WIRELESS_ON 60
+#define SONYPI_EVENT_WIRELESS_OFF 61
+#define SONYPI_EVENT_ZOOM_IN_PRESSED 62
+#define SONYPI_EVENT_ZOOM_OUT_PRESSED 63
+#define SONYPI_EVENT_CD_EJECT_PRESSED 64
+#define SONYPI_EVENT_MODEKEY_PRESSED 65
+#define SONYPI_EVENT_PKEY_P4 66
+#define SONYPI_EVENT_PKEY_P5 67
+#define SONYPI_EVENT_SETTINGKEY_PRESSED 68
+#define SONYPI_EVENT_VOLUME_INC_PRESSED 69
+#define SONYPI_EVENT_VOLUME_DEC_PRESSED 70
+#define SONYPI_EVENT_BRIGHTNESS_PRESSED 71
+#define SONYPI_EVENT_MEDIA_PRESSED 72
+#define SONYPI_EVENT_VENDOR_PRESSED 73
+
+/* get/set brightness */
+#define SONYPI_IOCGBRT _IOR('v', 0, __u8)
+#define SONYPI_IOCSBRT _IOW('v', 0, __u8)
+
+/* get battery full capacity/remaining capacity */
+#define SONYPI_IOCGBAT1CAP _IOR('v', 2, __u16)
+#define SONYPI_IOCGBAT1REM _IOR('v', 3, __u16)
+#define SONYPI_IOCGBAT2CAP _IOR('v', 4, __u16)
+#define SONYPI_IOCGBAT2REM _IOR('v', 5, __u16)
+
+/* get battery flags: battery1/battery2/ac adapter present */
+#define SONYPI_BFLAGS_B1 0x01
+#define SONYPI_BFLAGS_B2 0x02
+#define SONYPI_BFLAGS_AC 0x04
+#define SONYPI_IOCGBATFLAGS _IOR('v', 7, __u8)
+
+/* get/set bluetooth subsystem state on/off */
+#define SONYPI_IOCGBLUE _IOR('v', 8, __u8)
+#define SONYPI_IOCSBLUE _IOW('v', 9, __u8)
+
+/* get/set fan state on/off */
+#define SONYPI_IOCGFAN _IOR('v', 10, __u8)
+#define SONYPI_IOCSFAN _IOW('v', 11, __u8)
+
+/* get temperature (C) */
+#define SONYPI_IOCGTEMP _IOR('v', 12, __u8)
+
+
+#endif /* _UAPI_SONYPI_H_ */
diff --git a/include/uapi/linux/sound.h b/include/uapi/linux/sound.h
new file mode 100644
index 0000000..014c911
--- /dev/null
+++ b/include/uapi/linux/sound.h
@@ -0,0 +1,31 @@
+#ifndef _UAPI_LINUX_SOUND_H
+#define _UAPI_LINUX_SOUND_H
+
+/*
+ * Minor numbers for the sound driver.
+ */
+
+#include <linux/fs.h>
+
+#define SND_DEV_CTL 0 /* Control port /dev/mixer */
+#define SND_DEV_SEQ 1 /* Sequencer output /dev/sequencer (FM
+ synthesizer and MIDI output) */
+#define SND_DEV_MIDIN 2 /* Raw midi access */
+#define SND_DEV_DSP 3 /* Digitized voice /dev/dsp */
+#define SND_DEV_AUDIO 4 /* Sparc compatible /dev/audio */
+#define SND_DEV_DSP16 5 /* Like /dev/dsp but 16 bits/sample */
+/* #define SND_DEV_STATUS 6 */ /* /dev/sndstat (obsolete) */
+#define SND_DEV_UNUSED 6
+#define SND_DEV_AWFM 7 /* Reserved */
+#define SND_DEV_SEQ2 8 /* /dev/sequencer, level 2 interface */
+/* #define SND_DEV_SNDPROC 9 */ /* /dev/sndproc for programmable devices (not used) */
+/* #define SND_DEV_DMMIDI 9 */
+#define SND_DEV_SYNTH 9 /* Raw synth access /dev/synth (same as /dev/dmfm) */
+#define SND_DEV_DMFM 10 /* Raw synth access /dev/dmfm */
+#define SND_DEV_UNKNOWN11 11
+#define SND_DEV_ADSP 12 /* Like /dev/dsp (obsolete) */
+#define SND_DEV_AMIDI 13 /* Like /dev/midi (obsolete) */
+#define SND_DEV_ADMMIDI 14 /* Like /dev/dmmidi (onsolete) */
+
+
+#endif /* _UAPI_LINUX_SOUND_H */
diff --git a/include/uapi/linux/soundcard.h b/include/uapi/linux/soundcard.h
new file mode 100644
index 0000000..f3b21f9
--- /dev/null
+++ b/include/uapi/linux/soundcard.h
@@ -0,0 +1,1282 @@
+/*
+ * Copyright by Hannu Savolainen 1993-1997
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met: 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer. 2.
+ * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+#ifndef _UAPISOUNDCARD_H
+#define _UAPISOUNDCARD_H
+
+
+/*
+ * OSS interface version. With versions earlier than 3.6 this value is
+ * an integer with value less than 361. In versions 3.6 and later
+ * it's a six digit hexadecimal value. For example value
+ * of 0x030600 represents OSS version 3.6.0.
+ * Use ioctl(fd, OSS_GETVERSION, &int) to get the version number of
+ * the currently active driver.
+ */
+#define SOUND_VERSION 0x030802
+#define OPEN_SOUND_SYSTEM
+
+/* In Linux we need to be prepared for cross compiling */
+#include <linux/ioctl.h>
+
+/* Endian macros. */
+#ifndef __KERNEL__
+# include <endian.h>
+#endif
+
+/*
+ * Supported card ID numbers (Should be somewhere else?)
+ */
+
+#define SNDCARD_ADLIB 1
+#define SNDCARD_SB 2
+#define SNDCARD_PAS 3
+#define SNDCARD_GUS 4
+#define SNDCARD_MPU401 5
+#define SNDCARD_SB16 6
+#define SNDCARD_SB16MIDI 7
+#define SNDCARD_UART6850 8
+#define SNDCARD_GUS16 9
+#define SNDCARD_MSS 10
+#define SNDCARD_PSS 11
+#define SNDCARD_SSCAPE 12
+#define SNDCARD_PSS_MPU 13
+#define SNDCARD_PSS_MSS 14
+#define SNDCARD_SSCAPE_MSS 15
+#define SNDCARD_TRXPRO 16
+#define SNDCARD_TRXPRO_SB 17
+#define SNDCARD_TRXPRO_MPU 18
+#define SNDCARD_MAD16 19
+#define SNDCARD_MAD16_MPU 20
+#define SNDCARD_CS4232 21
+#define SNDCARD_CS4232_MPU 22
+#define SNDCARD_MAUI 23
+#define SNDCARD_PSEUDO_MSS 24
+#define SNDCARD_GUSPNP 25
+#define SNDCARD_UART401 26
+/* Sound card numbers 27 to N are reserved. Don't add more numbers here. */
+
+/***********************************
+ * IOCTL Commands for /dev/sequencer
+ */
+
+#ifndef _SIOWR
+#if defined(_IOWR) && (defined(_AIX) || (!defined(sun) && !defined(sparc) && !defined(__sparc__) && !defined(__INCioctlh) && !defined(__Lynx__)))
+/* Use already defined ioctl defines if they exist (except with Sun or Sparc) */
+#define SIOCPARM_MASK IOCPARM_MASK
+#define SIOC_VOID IOC_VOID
+#define SIOC_OUT IOC_OUT
+#define SIOC_IN IOC_IN
+#define SIOC_INOUT IOC_INOUT
+#define _SIOC_SIZE _IOC_SIZE
+#define _SIOC_DIR _IOC_DIR
+#define _SIOC_NONE _IOC_NONE
+#define _SIOC_READ _IOC_READ
+#define _SIOC_WRITE _IOC_WRITE
+#define _SIO _IO
+#define _SIOR _IOR
+#define _SIOW _IOW
+#define _SIOWR _IOWR
+#else
+
+/* Ioctl's have the command encoded in the lower word,
+ * and the size of any in or out parameters in the upper
+ * word. The high 2 bits of the upper word are used
+ * to encode the in/out status of the parameter; for now
+ * we restrict parameters to at most 8191 bytes.
+ */
+/* #define SIOCTYPE (0xff<<8) */
+#define SIOCPARM_MASK 0x1fff /* parameters must be < 8192 bytes */
+#define SIOC_VOID 0x00000000 /* no parameters */
+#define SIOC_OUT 0x20000000 /* copy out parameters */
+#define SIOC_IN 0x40000000 /* copy in parameters */
+#define SIOC_INOUT (SIOC_IN|SIOC_OUT)
+/* the 0x20000000 is so we can distinguish new ioctl's from old */
+#define _SIO(x,y) ((int)(SIOC_VOID|(x<<8)|y))
+#define _SIOR(x,y,t) ((int)(SIOC_OUT|((sizeof(t)&SIOCPARM_MASK)<<16)|(x<<8)|y))
+#define _SIOW(x,y,t) ((int)(SIOC_IN|((sizeof(t)&SIOCPARM_MASK)<<16)|(x<<8)|y))
+/* this should be _SIORW, but stdio got there first */
+#define _SIOWR(x,y,t) ((int)(SIOC_INOUT|((sizeof(t)&SIOCPARM_MASK)<<16)|(x<<8)|y))
+#define _SIOC_SIZE(x) ((x>>16)&SIOCPARM_MASK)
+#define _SIOC_DIR(x) (x & 0xf0000000)
+#define _SIOC_NONE SIOC_VOID
+#define _SIOC_READ SIOC_OUT
+#define _SIOC_WRITE SIOC_IN
+# endif /* _IOWR */
+#endif /* !_SIOWR */
+
+#define SNDCTL_SEQ_RESET _SIO ('Q', 0)
+#define SNDCTL_SEQ_SYNC _SIO ('Q', 1)
+#define SNDCTL_SYNTH_INFO _SIOWR('Q', 2, struct synth_info)
+#define SNDCTL_SEQ_CTRLRATE _SIOWR('Q', 3, int) /* Set/get timer resolution (HZ) */
+#define SNDCTL_SEQ_GETOUTCOUNT _SIOR ('Q', 4, int)
+#define SNDCTL_SEQ_GETINCOUNT _SIOR ('Q', 5, int)
+#define SNDCTL_SEQ_PERCMODE _SIOW ('Q', 6, int)
+#define SNDCTL_FM_LOAD_INSTR _SIOW ('Q', 7, struct sbi_instrument) /* Obsolete. Don't use!!!!!! */
+#define SNDCTL_SEQ_TESTMIDI _SIOW ('Q', 8, int)
+#define SNDCTL_SEQ_RESETSAMPLES _SIOW ('Q', 9, int)
+#define SNDCTL_SEQ_NRSYNTHS _SIOR ('Q',10, int)
+#define SNDCTL_SEQ_NRMIDIS _SIOR ('Q',11, int)
+#define SNDCTL_MIDI_INFO _SIOWR('Q',12, struct midi_info)
+#define SNDCTL_SEQ_THRESHOLD _SIOW ('Q',13, int)
+#define SNDCTL_SYNTH_MEMAVL _SIOWR('Q',14, int) /* in=dev#, out=memsize */
+#define SNDCTL_FM_4OP_ENABLE _SIOW ('Q',15, int) /* in=dev# */
+#define SNDCTL_SEQ_PANIC _SIO ('Q',17)
+#define SNDCTL_SEQ_OUTOFBAND _SIOW ('Q',18, struct seq_event_rec)
+#define SNDCTL_SEQ_GETTIME _SIOR ('Q',19, int)
+#define SNDCTL_SYNTH_ID _SIOWR('Q',20, struct synth_info)
+#define SNDCTL_SYNTH_CONTROL _SIOWR('Q',21, struct synth_control)
+#define SNDCTL_SYNTH_REMOVESAMPLE _SIOWR('Q',22, struct remove_sample)
+
+typedef struct synth_control
+{
+ int devno; /* Synthesizer # */
+ char data[4000]; /* Device spesific command/data record */
+}synth_control;
+
+typedef struct remove_sample
+{
+ int devno; /* Synthesizer # */
+ int bankno; /* MIDI bank # (0=General MIDI) */
+ int instrno; /* MIDI instrument number */
+} remove_sample;
+
+typedef struct seq_event_rec {
+ unsigned char arr[8];
+} seq_event_rec;
+
+#define SNDCTL_TMR_TIMEBASE _SIOWR('T', 1, int)
+#define SNDCTL_TMR_START _SIO ('T', 2)
+#define SNDCTL_TMR_STOP _SIO ('T', 3)
+#define SNDCTL_TMR_CONTINUE _SIO ('T', 4)
+#define SNDCTL_TMR_TEMPO _SIOWR('T', 5, int)
+#define SNDCTL_TMR_SOURCE _SIOWR('T', 6, int)
+# define TMR_INTERNAL 0x00000001
+# define TMR_EXTERNAL 0x00000002
+# define TMR_MODE_MIDI 0x00000010
+# define TMR_MODE_FSK 0x00000020
+# define TMR_MODE_CLS 0x00000040
+# define TMR_MODE_SMPTE 0x00000080
+#define SNDCTL_TMR_METRONOME _SIOW ('T', 7, int)
+#define SNDCTL_TMR_SELECT _SIOW ('T', 8, int)
+
+/*
+ * Some big endian/little endian handling macros
+ */
+
+#define _LINUX_PATCHKEY_H_INDIRECT
+#include <linux/patchkey.h>
+#undef _LINUX_PATCHKEY_H_INDIRECT
+
+#if !defined(__KERNEL__)
+# if defined(__BYTE_ORDER)
+# if __BYTE_ORDER == __BIG_ENDIAN
+# define AFMT_S16_NE AFMT_S16_BE
+# elif __BYTE_ORDER == __LITTLE_ENDIAN
+# define AFMT_S16_NE AFMT_S16_LE
+# else
+# error "could not determine byte order"
+# endif
+# endif
+#endif
+
+/*
+ * Sample loading mechanism for internal synthesizers (/dev/sequencer)
+ * The following patch_info structure has been designed to support
+ * Gravis UltraSound. It tries to be universal format for uploading
+ * sample based patches but is probably too limited.
+ *
+ * (PBD) As Hannu guessed, the GUS structure is too limited for
+ * the WaveFront, but this is the right place for a constant definition.
+ */
+
+struct patch_info {
+ unsigned short key; /* Use WAVE_PATCH here */
+#define WAVE_PATCH _PATCHKEY(0x04)
+#define GUS_PATCH WAVE_PATCH
+#define WAVEFRONT_PATCH _PATCHKEY(0x06)
+
+ short device_no; /* Synthesizer number */
+ short instr_no; /* Midi pgm# */
+
+ unsigned int mode;
+/*
+ * The least significant byte has the same format than the GUS .PAT
+ * files
+ */
+#define WAVE_16_BITS 0x01 /* bit 0 = 8 or 16 bit wave data. */
+#define WAVE_UNSIGNED 0x02 /* bit 1 = Signed - Unsigned data. */
+#define WAVE_LOOPING 0x04 /* bit 2 = looping enabled-1. */
+#define WAVE_BIDIR_LOOP 0x08 /* bit 3 = Set is bidirectional looping. */
+#define WAVE_LOOP_BACK 0x10 /* bit 4 = Set is looping backward. */
+#define WAVE_SUSTAIN_ON 0x20 /* bit 5 = Turn sustaining on. (Env. pts. 3)*/
+#define WAVE_ENVELOPES 0x40 /* bit 6 = Enable envelopes - 1 */
+#define WAVE_FAST_RELEASE 0x80 /* bit 7 = Shut off immediately after note off */
+ /* (use the env_rate/env_offs fields). */
+/* Linux specific bits */
+#define WAVE_VIBRATO 0x00010000 /* The vibrato info is valid */
+#define WAVE_TREMOLO 0x00020000 /* The tremolo info is valid */
+#define WAVE_SCALE 0x00040000 /* The scaling info is valid */
+#define WAVE_FRACTIONS 0x00080000 /* Fraction information is valid */
+/* Reserved bits */
+#define WAVE_ROM 0x40000000 /* For future use */
+#define WAVE_MULAW 0x20000000 /* For future use */
+/* Other bits must be zeroed */
+
+ int len; /* Size of the wave data in bytes */
+ int loop_start, loop_end; /* Byte offsets from the beginning */
+
+/*
+ * The base_freq and base_note fields are used when computing the
+ * playback speed for a note. The base_note defines the tone frequency
+ * which is heard if the sample is played using the base_freq as the
+ * playback speed.
+ *
+ * The low_note and high_note fields define the minimum and maximum note
+ * frequencies for which this sample is valid. It is possible to define
+ * more than one samples for an instrument number at the same time. The
+ * low_note and high_note fields are used to select the most suitable one.
+ *
+ * The fields base_note, high_note and low_note should contain
+ * the note frequency multiplied by 1000. For example value for the
+ * middle A is 440*1000.
+ */
+
+ unsigned int base_freq;
+ unsigned int base_note;
+ unsigned int high_note;
+ unsigned int low_note;
+ int panning; /* -128=left, 127=right */
+ int detuning;
+
+/* New fields introduced in version 1.99.5 */
+
+ /* Envelope. Enabled by mode bit WAVE_ENVELOPES */
+ unsigned char env_rate[ 6 ]; /* GUS HW ramping rate */
+ unsigned char env_offset[ 6 ]; /* 255 == 100% */
+
+ /*
+ * The tremolo, vibrato and scale info are not supported yet.
+ * Enable by setting the mode bits WAVE_TREMOLO, WAVE_VIBRATO or
+ * WAVE_SCALE
+ */
+
+ unsigned char tremolo_sweep;
+ unsigned char tremolo_rate;
+ unsigned char tremolo_depth;
+
+ unsigned char vibrato_sweep;
+ unsigned char vibrato_rate;
+ unsigned char vibrato_depth;
+
+ int scale_frequency;
+ unsigned int scale_factor; /* from 0 to 2048 or 0 to 2 */
+
+ int volume;
+ int fractions;
+ int reserved1;
+ int spare[2];
+ char data[1]; /* The waveform data starts here */
+ };
+
+struct sysex_info {
+ short key; /* Use SYSEX_PATCH or MAUI_PATCH here */
+#define SYSEX_PATCH _PATCHKEY(0x05)
+#define MAUI_PATCH _PATCHKEY(0x06)
+ short device_no; /* Synthesizer number */
+ int len; /* Size of the sysex data in bytes */
+ unsigned char data[1]; /* Sysex data starts here */
+ };
+
+/*
+ * /dev/sequencer input events.
+ *
+ * The data written to the /dev/sequencer is a stream of events. Events
+ * are records of 4 or 8 bytes. The first byte defines the size.
+ * Any number of events can be written with a write call. There
+ * is a set of macros for sending these events. Use these macros if you
+ * want to maximize portability of your program.
+ *
+ * Events SEQ_WAIT, SEQ_MIDIPUTC and SEQ_ECHO. Are also input events.
+ * (All input events are currently 4 bytes long. Be prepared to support
+ * 8 byte events also. If you receive any event having first byte >= 128,
+ * it's a 8 byte event.
+ *
+ * The events are documented at the end of this file.
+ *
+ * Normal events (4 bytes)
+ * There is also a 8 byte version of most of the 4 byte events. The
+ * 8 byte one is recommended.
+ */
+#define SEQ_NOTEOFF 0
+#define SEQ_FMNOTEOFF SEQ_NOTEOFF /* Just old name */
+#define SEQ_NOTEON 1
+#define SEQ_FMNOTEON SEQ_NOTEON
+#define SEQ_WAIT TMR_WAIT_ABS
+#define SEQ_PGMCHANGE 3
+#define SEQ_FMPGMCHANGE SEQ_PGMCHANGE
+#define SEQ_SYNCTIMER TMR_START
+#define SEQ_MIDIPUTC 5
+#define SEQ_DRUMON 6 /*** OBSOLETE ***/
+#define SEQ_DRUMOFF 7 /*** OBSOLETE ***/
+#define SEQ_ECHO TMR_ECHO /* For synching programs with output */
+#define SEQ_AFTERTOUCH 9
+#define SEQ_CONTROLLER 10
+
+/*******************************************
+ * Midi controller numbers
+ *******************************************
+ * Controllers 0 to 31 (0x00 to 0x1f) and
+ * 32 to 63 (0x20 to 0x3f) are continuous
+ * controllers.
+ * In the MIDI 1.0 these controllers are sent using
+ * two messages. Controller numbers 0 to 31 are used
+ * to send the MSB and the controller numbers 32 to 63
+ * are for the LSB. Note that just 7 bits are used in MIDI bytes.
+ */
+
+#define CTL_BANK_SELECT 0x00
+#define CTL_MODWHEEL 0x01
+#define CTL_BREATH 0x02
+/* undefined 0x03 */
+#define CTL_FOOT 0x04
+#define CTL_PORTAMENTO_TIME 0x05
+#define CTL_DATA_ENTRY 0x06
+#define CTL_MAIN_VOLUME 0x07
+#define CTL_BALANCE 0x08
+/* undefined 0x09 */
+#define CTL_PAN 0x0a
+#define CTL_EXPRESSION 0x0b
+/* undefined 0x0c */
+/* undefined 0x0d */
+/* undefined 0x0e */
+/* undefined 0x0f */
+#define CTL_GENERAL_PURPOSE1 0x10
+#define CTL_GENERAL_PURPOSE2 0x11
+#define CTL_GENERAL_PURPOSE3 0x12
+#define CTL_GENERAL_PURPOSE4 0x13
+/* undefined 0x14 - 0x1f */
+
+/* undefined 0x20 */
+/* The controller numbers 0x21 to 0x3f are reserved for the */
+/* least significant bytes of the controllers 0x00 to 0x1f. */
+/* These controllers are not recognised by the driver. */
+
+/* Controllers 64 to 69 (0x40 to 0x45) are on/off switches. */
+/* 0=OFF and 127=ON (intermediate values are possible) */
+#define CTL_DAMPER_PEDAL 0x40
+#define CTL_SUSTAIN 0x40 /* Alias */
+#define CTL_HOLD 0x40 /* Alias */
+#define CTL_PORTAMENTO 0x41
+#define CTL_SOSTENUTO 0x42
+#define CTL_SOFT_PEDAL 0x43
+/* undefined 0x44 */
+#define CTL_HOLD2 0x45
+/* undefined 0x46 - 0x4f */
+
+#define CTL_GENERAL_PURPOSE5 0x50
+#define CTL_GENERAL_PURPOSE6 0x51
+#define CTL_GENERAL_PURPOSE7 0x52
+#define CTL_GENERAL_PURPOSE8 0x53
+/* undefined 0x54 - 0x5a */
+#define CTL_EXT_EFF_DEPTH 0x5b
+#define CTL_TREMOLO_DEPTH 0x5c
+#define CTL_CHORUS_DEPTH 0x5d
+#define CTL_DETUNE_DEPTH 0x5e
+#define CTL_CELESTE_DEPTH 0x5e /* Alias for the above one */
+#define CTL_PHASER_DEPTH 0x5f
+#define CTL_DATA_INCREMENT 0x60
+#define CTL_DATA_DECREMENT 0x61
+#define CTL_NONREG_PARM_NUM_LSB 0x62
+#define CTL_NONREG_PARM_NUM_MSB 0x63
+#define CTL_REGIST_PARM_NUM_LSB 0x64
+#define CTL_REGIST_PARM_NUM_MSB 0x65
+/* undefined 0x66 - 0x78 */
+/* reserved 0x79 - 0x7f */
+
+/* Pseudo controllers (not midi compatible) */
+#define CTRL_PITCH_BENDER 255
+#define CTRL_PITCH_BENDER_RANGE 254
+#define CTRL_EXPRESSION 253 /* Obsolete */
+#define CTRL_MAIN_VOLUME 252 /* Obsolete */
+#define SEQ_BALANCE 11
+#define SEQ_VOLMODE 12
+
+/*
+ * Volume mode decides how volumes are used
+ */
+
+#define VOL_METHOD_ADAGIO 1
+#define VOL_METHOD_LINEAR 2
+
+/*
+ * Note! SEQ_WAIT, SEQ_MIDIPUTC and SEQ_ECHO are used also as
+ * input events.
+ */
+
+/*
+ * Event codes 0xf0 to 0xfc are reserved for future extensions.
+ */
+
+#define SEQ_FULLSIZE 0xfd /* Long events */
+/*
+ * SEQ_FULLSIZE events are used for loading patches/samples to the
+ * synthesizer devices. These events are passed directly to the driver
+ * of the associated synthesizer device. There is no limit to the size
+ * of the extended events. These events are not queued but executed
+ * immediately when the write() is called (execution can take several
+ * seconds of time).
+ *
+ * When a SEQ_FULLSIZE message is written to the device, it must
+ * be written using exactly one write() call. Other events cannot
+ * be mixed to the same write.
+ *
+ * For FM synths (YM3812/OPL3) use struct sbi_instrument and write it to the
+ * /dev/sequencer. Don't write other data together with the instrument structure
+ * Set the key field of the structure to FM_PATCH. The device field is used to
+ * route the patch to the corresponding device.
+ *
+ * For wave table use struct patch_info. Initialize the key field
+ * to WAVE_PATCH.
+ */
+#define SEQ_PRIVATE 0xfe /* Low level HW dependent events (8 bytes) */
+#define SEQ_EXTENDED 0xff /* Extended events (8 bytes) OBSOLETE */
+
+/*
+ * Record for FM patches
+ */
+
+typedef unsigned char sbi_instr_data[32];
+
+struct sbi_instrument {
+ unsigned short key; /* FM_PATCH or OPL3_PATCH */
+#define FM_PATCH _PATCHKEY(0x01)
+#define OPL3_PATCH _PATCHKEY(0x03)
+ short device; /* Synth# (0-4) */
+ int channel; /* Program# to be initialized */
+ sbi_instr_data operators; /* Register settings for operator cells (.SBI format) */
+ };
+
+struct synth_info { /* Read only */
+ char name[30];
+ int device; /* 0-N. INITIALIZE BEFORE CALLING */
+ int synth_type;
+#define SYNTH_TYPE_FM 0
+#define SYNTH_TYPE_SAMPLE 1
+#define SYNTH_TYPE_MIDI 2 /* Midi interface */
+
+ int synth_subtype;
+#define FM_TYPE_ADLIB 0x00
+#define FM_TYPE_OPL3 0x01
+#define MIDI_TYPE_MPU401 0x401
+
+#define SAMPLE_TYPE_BASIC 0x10
+#define SAMPLE_TYPE_GUS SAMPLE_TYPE_BASIC
+#define SAMPLE_TYPE_WAVEFRONT 0x11
+
+ int perc_mode; /* No longer supported */
+ int nr_voices;
+ int nr_drums; /* Obsolete field */
+ int instr_bank_size;
+ unsigned int capabilities;
+#define SYNTH_CAP_PERCMODE 0x00000001 /* No longer used */
+#define SYNTH_CAP_OPL3 0x00000002 /* Set if OPL3 supported */
+#define SYNTH_CAP_INPUT 0x00000004 /* Input (MIDI) device */
+ int dummies[19]; /* Reserve space */
+ };
+
+struct sound_timer_info {
+ char name[32];
+ int caps;
+ };
+
+#define MIDI_CAP_MPU401 1 /* MPU-401 intelligent mode */
+
+struct midi_info {
+ char name[30];
+ int device; /* 0-N. INITIALIZE BEFORE CALLING */
+ unsigned int capabilities; /* To be defined later */
+ int dev_type;
+ int dummies[18]; /* Reserve space */
+ };
+
+/********************************************
+ * ioctl commands for the /dev/midi##
+ */
+typedef struct {
+ unsigned char cmd;
+ char nr_args, nr_returns;
+ unsigned char data[30];
+ } mpu_command_rec;
+
+#define SNDCTL_MIDI_PRETIME _SIOWR('m', 0, int)
+#define SNDCTL_MIDI_MPUMODE _SIOWR('m', 1, int)
+#define SNDCTL_MIDI_MPUCMD _SIOWR('m', 2, mpu_command_rec)
+
+/********************************************
+ * IOCTL commands for /dev/dsp and /dev/audio
+ */
+
+#define SNDCTL_DSP_RESET _SIO ('P', 0)
+#define SNDCTL_DSP_SYNC _SIO ('P', 1)
+#define SNDCTL_DSP_SPEED _SIOWR('P', 2, int)
+#define SNDCTL_DSP_STEREO _SIOWR('P', 3, int)
+#define SNDCTL_DSP_GETBLKSIZE _SIOWR('P', 4, int)
+#define SNDCTL_DSP_SAMPLESIZE SNDCTL_DSP_SETFMT
+#define SNDCTL_DSP_CHANNELS _SIOWR('P', 6, int)
+#define SOUND_PCM_WRITE_CHANNELS SNDCTL_DSP_CHANNELS
+#define SOUND_PCM_WRITE_FILTER _SIOWR('P', 7, int)
+#define SNDCTL_DSP_POST _SIO ('P', 8)
+#define SNDCTL_DSP_SUBDIVIDE _SIOWR('P', 9, int)
+#define SNDCTL_DSP_SETFRAGMENT _SIOWR('P',10, int)
+
+/* Audio data formats (Note! U8=8 and S16_LE=16 for compatibility) */
+#define SNDCTL_DSP_GETFMTS _SIOR ('P',11, int) /* Returns a mask */
+#define SNDCTL_DSP_SETFMT _SIOWR('P',5, int) /* Selects ONE fmt*/
+# define AFMT_QUERY 0x00000000 /* Return current fmt */
+# define AFMT_MU_LAW 0x00000001
+# define AFMT_A_LAW 0x00000002
+# define AFMT_IMA_ADPCM 0x00000004
+# define AFMT_U8 0x00000008
+# define AFMT_S16_LE 0x00000010 /* Little endian signed 16*/
+# define AFMT_S16_BE 0x00000020 /* Big endian signed 16 */
+# define AFMT_S8 0x00000040
+# define AFMT_U16_LE 0x00000080 /* Little endian U16 */
+# define AFMT_U16_BE 0x00000100 /* Big endian U16 */
+# define AFMT_MPEG 0x00000200 /* MPEG (2) audio */
+# define AFMT_AC3 0x00000400 /* Dolby Digital AC3 */
+
+/*
+ * Buffer status queries.
+ */
+typedef struct audio_buf_info {
+ int fragments; /* # of available fragments (partially usend ones not counted) */
+ int fragstotal; /* Total # of fragments allocated */
+ int fragsize; /* Size of a fragment in bytes */
+
+ int bytes; /* Available space in bytes (includes partially used fragments) */
+ /* Note! 'bytes' could be more than fragments*fragsize */
+ } audio_buf_info;
+
+#define SNDCTL_DSP_GETOSPACE _SIOR ('P',12, audio_buf_info)
+#define SNDCTL_DSP_GETISPACE _SIOR ('P',13, audio_buf_info)
+#define SNDCTL_DSP_NONBLOCK _SIO ('P',14)
+#define SNDCTL_DSP_GETCAPS _SIOR ('P',15, int)
+# define DSP_CAP_REVISION 0x000000ff /* Bits for revision level (0 to 255) */
+# define DSP_CAP_DUPLEX 0x00000100 /* Full duplex record/playback */
+# define DSP_CAP_REALTIME 0x00000200 /* Real time capability */
+# define DSP_CAP_BATCH 0x00000400 /* Device has some kind of */
+ /* internal buffers which may */
+ /* cause some delays and */
+ /* decrease precision of timing */
+# define DSP_CAP_COPROC 0x00000800 /* Has a coprocessor */
+ /* Sometimes it's a DSP */
+ /* but usually not */
+# define DSP_CAP_TRIGGER 0x00001000 /* Supports SETTRIGGER */
+# define DSP_CAP_MMAP 0x00002000 /* Supports mmap() */
+# define DSP_CAP_MULTI 0x00004000 /* support multiple open */
+# define DSP_CAP_BIND 0x00008000 /* channel binding to front/rear/cneter/lfe */
+
+
+#define SNDCTL_DSP_GETTRIGGER _SIOR ('P',16, int)
+#define SNDCTL_DSP_SETTRIGGER _SIOW ('P',16, int)
+# define PCM_ENABLE_INPUT 0x00000001
+# define PCM_ENABLE_OUTPUT 0x00000002
+
+typedef struct count_info {
+ int bytes; /* Total # of bytes processed */
+ int blocks; /* # of fragment transitions since last time */
+ int ptr; /* Current DMA pointer value */
+ } count_info;
+
+#define SNDCTL_DSP_GETIPTR _SIOR ('P',17, count_info)
+#define SNDCTL_DSP_GETOPTR _SIOR ('P',18, count_info)
+
+typedef struct buffmem_desc {
+ unsigned *buffer;
+ int size;
+ } buffmem_desc;
+#define SNDCTL_DSP_MAPINBUF _SIOR ('P', 19, buffmem_desc)
+#define SNDCTL_DSP_MAPOUTBUF _SIOR ('P', 20, buffmem_desc)
+#define SNDCTL_DSP_SETSYNCRO _SIO ('P', 21)
+#define SNDCTL_DSP_SETDUPLEX _SIO ('P', 22)
+#define SNDCTL_DSP_GETODELAY _SIOR ('P', 23, int)
+
+#define SNDCTL_DSP_GETCHANNELMASK _SIOWR('P', 64, int)
+#define SNDCTL_DSP_BIND_CHANNEL _SIOWR('P', 65, int)
+# define DSP_BIND_QUERY 0x00000000
+# define DSP_BIND_FRONT 0x00000001
+# define DSP_BIND_SURR 0x00000002
+# define DSP_BIND_CENTER_LFE 0x00000004
+# define DSP_BIND_HANDSET 0x00000008
+# define DSP_BIND_MIC 0x00000010
+# define DSP_BIND_MODEM1 0x00000020
+# define DSP_BIND_MODEM2 0x00000040
+# define DSP_BIND_I2S 0x00000080
+# define DSP_BIND_SPDIF 0x00000100
+
+#define SNDCTL_DSP_SETSPDIF _SIOW ('P', 66, int)
+#define SNDCTL_DSP_GETSPDIF _SIOR ('P', 67, int)
+# define SPDIF_PRO 0x0001
+# define SPDIF_N_AUD 0x0002
+# define SPDIF_COPY 0x0004
+# define SPDIF_PRE 0x0008
+# define SPDIF_CC 0x07f0
+# define SPDIF_L 0x0800
+# define SPDIF_DRS 0x4000
+# define SPDIF_V 0x8000
+
+/*
+ * Application's profile defines the way how playback underrun situations should be handled.
+ *
+ * APF_NORMAL (the default) and APF_NETWORK make the driver to cleanup the
+ * playback buffer whenever an underrun occurs. This consumes some time
+ * prevents looping the existing buffer.
+ * APF_CPUINTENS is intended to be set by CPU intensive applications which
+ * are likely to run out of time occasionally. In this mode the buffer cleanup is
+ * disabled which saves CPU time but also let's the previous buffer content to
+ * be played during the "pause" after the underrun.
+ */
+#define SNDCTL_DSP_PROFILE _SIOW ('P', 23, int)
+#define APF_NORMAL 0 /* Normal applications */
+#define APF_NETWORK 1 /* Underruns probably caused by an "external" delay */
+#define APF_CPUINTENS 2 /* Underruns probably caused by "overheating" the CPU */
+
+#define SOUND_PCM_READ_RATE _SIOR ('P', 2, int)
+#define SOUND_PCM_READ_CHANNELS _SIOR ('P', 6, int)
+#define SOUND_PCM_READ_BITS _SIOR ('P', 5, int)
+#define SOUND_PCM_READ_FILTER _SIOR ('P', 7, int)
+
+/* Some alias names */
+#define SOUND_PCM_WRITE_BITS SNDCTL_DSP_SETFMT
+#define SOUND_PCM_WRITE_RATE SNDCTL_DSP_SPEED
+#define SOUND_PCM_POST SNDCTL_DSP_POST
+#define SOUND_PCM_RESET SNDCTL_DSP_RESET
+#define SOUND_PCM_SYNC SNDCTL_DSP_SYNC
+#define SOUND_PCM_SUBDIVIDE SNDCTL_DSP_SUBDIVIDE
+#define SOUND_PCM_SETFRAGMENT SNDCTL_DSP_SETFRAGMENT
+#define SOUND_PCM_GETFMTS SNDCTL_DSP_GETFMTS
+#define SOUND_PCM_SETFMT SNDCTL_DSP_SETFMT
+#define SOUND_PCM_GETOSPACE SNDCTL_DSP_GETOSPACE
+#define SOUND_PCM_GETISPACE SNDCTL_DSP_GETISPACE
+#define SOUND_PCM_NONBLOCK SNDCTL_DSP_NONBLOCK
+#define SOUND_PCM_GETCAPS SNDCTL_DSP_GETCAPS
+#define SOUND_PCM_GETTRIGGER SNDCTL_DSP_GETTRIGGER
+#define SOUND_PCM_SETTRIGGER SNDCTL_DSP_SETTRIGGER
+#define SOUND_PCM_SETSYNCRO SNDCTL_DSP_SETSYNCRO
+#define SOUND_PCM_GETIPTR SNDCTL_DSP_GETIPTR
+#define SOUND_PCM_GETOPTR SNDCTL_DSP_GETOPTR
+#define SOUND_PCM_MAPINBUF SNDCTL_DSP_MAPINBUF
+#define SOUND_PCM_MAPOUTBUF SNDCTL_DSP_MAPOUTBUF
+
+/*
+ * ioctl calls to be used in communication with coprocessors and
+ * DSP chips.
+ */
+
+typedef struct copr_buffer {
+ int command; /* Set to 0 if not used */
+ int flags;
+#define CPF_NONE 0x0000
+#define CPF_FIRST 0x0001 /* First block */
+#define CPF_LAST 0x0002 /* Last block */
+ int len;
+ int offs; /* If required by the device (0 if not used) */
+
+ unsigned char data[4000]; /* NOTE! 4000 is not 4k */
+ } copr_buffer;
+
+typedef struct copr_debug_buf {
+ int command; /* Used internally. Set to 0 */
+ int parm1;
+ int parm2;
+ int flags;
+ int len; /* Length of data in bytes */
+ } copr_debug_buf;
+
+typedef struct copr_msg {
+ int len;
+ unsigned char data[4000];
+ } copr_msg;
+
+#define SNDCTL_COPR_RESET _SIO ('C', 0)
+#define SNDCTL_COPR_LOAD _SIOWR('C', 1, copr_buffer)
+#define SNDCTL_COPR_RDATA _SIOWR('C', 2, copr_debug_buf)
+#define SNDCTL_COPR_RCODE _SIOWR('C', 3, copr_debug_buf)
+#define SNDCTL_COPR_WDATA _SIOW ('C', 4, copr_debug_buf)
+#define SNDCTL_COPR_WCODE _SIOW ('C', 5, copr_debug_buf)
+#define SNDCTL_COPR_RUN _SIOWR('C', 6, copr_debug_buf)
+#define SNDCTL_COPR_HALT _SIOWR('C', 7, copr_debug_buf)
+#define SNDCTL_COPR_SENDMSG _SIOWR('C', 8, copr_msg)
+#define SNDCTL_COPR_RCVMSG _SIOR ('C', 9, copr_msg)
+
+/*********************************************
+ * IOCTL commands for /dev/mixer
+ */
+
+/*
+ * Mixer devices
+ *
+ * There can be up to 20 different analog mixer channels. The
+ * SOUND_MIXER_NRDEVICES gives the currently supported maximum.
+ * The SOUND_MIXER_READ_DEVMASK returns a bitmask which tells
+ * the devices supported by the particular mixer.
+ */
+
+#define SOUND_MIXER_NRDEVICES 25
+#define SOUND_MIXER_VOLUME 0
+#define SOUND_MIXER_BASS 1
+#define SOUND_MIXER_TREBLE 2
+#define SOUND_MIXER_SYNTH 3
+#define SOUND_MIXER_PCM 4
+#define SOUND_MIXER_SPEAKER 5
+#define SOUND_MIXER_LINE 6
+#define SOUND_MIXER_MIC 7
+#define SOUND_MIXER_CD 8
+#define SOUND_MIXER_IMIX 9 /* Recording monitor */
+#define SOUND_MIXER_ALTPCM 10
+#define SOUND_MIXER_RECLEV 11 /* Recording level */
+#define SOUND_MIXER_IGAIN 12 /* Input gain */
+#define SOUND_MIXER_OGAIN 13 /* Output gain */
+/*
+ * The AD1848 codec and compatibles have three line level inputs
+ * (line, aux1 and aux2). Since each card manufacturer have assigned
+ * different meanings to these inputs, it's inpractical to assign
+ * specific meanings (line, cd, synth etc.) to them.
+ */
+#define SOUND_MIXER_LINE1 14 /* Input source 1 (aux1) */
+#define SOUND_MIXER_LINE2 15 /* Input source 2 (aux2) */
+#define SOUND_MIXER_LINE3 16 /* Input source 3 (line) */
+#define SOUND_MIXER_DIGITAL1 17 /* Digital (input) 1 */
+#define SOUND_MIXER_DIGITAL2 18 /* Digital (input) 2 */
+#define SOUND_MIXER_DIGITAL3 19 /* Digital (input) 3 */
+#define SOUND_MIXER_PHONEIN 20 /* Phone input */
+#define SOUND_MIXER_PHONEOUT 21 /* Phone output */
+#define SOUND_MIXER_VIDEO 22 /* Video/TV (audio) in */
+#define SOUND_MIXER_RADIO 23 /* Radio in */
+#define SOUND_MIXER_MONITOR 24 /* Monitor (usually mic) volume */
+
+/* Some on/off settings (SOUND_SPECIAL_MIN - SOUND_SPECIAL_MAX) */
+/* Not counted to SOUND_MIXER_NRDEVICES, but use the same number space */
+#define SOUND_ONOFF_MIN 28
+#define SOUND_ONOFF_MAX 30
+
+/* Note! Number 31 cannot be used since the sign bit is reserved */
+#define SOUND_MIXER_NONE 31
+
+/*
+ * The following unsupported macros are no longer functional.
+ * Use SOUND_MIXER_PRIVATE# macros in future.
+ */
+#define SOUND_MIXER_ENHANCE SOUND_MIXER_NONE
+#define SOUND_MIXER_MUTE SOUND_MIXER_NONE
+#define SOUND_MIXER_LOUD SOUND_MIXER_NONE
+
+
+#define SOUND_DEVICE_LABELS {"Vol ", "Bass ", "Trebl", "Synth", "Pcm ", "Spkr ", "Line ", \
+ "Mic ", "CD ", "Mix ", "Pcm2 ", "Rec ", "IGain", "OGain", \
+ "Line1", "Line2", "Line3", "Digital1", "Digital2", "Digital3", \
+ "PhoneIn", "PhoneOut", "Video", "Radio", "Monitor"}
+
+#define SOUND_DEVICE_NAMES {"vol", "bass", "treble", "synth", "pcm", "speaker", "line", \
+ "mic", "cd", "mix", "pcm2", "rec", "igain", "ogain", \
+ "line1", "line2", "line3", "dig1", "dig2", "dig3", \
+ "phin", "phout", "video", "radio", "monitor"}
+
+/* Device bitmask identifiers */
+
+#define SOUND_MIXER_RECSRC 0xff /* Arg contains a bit for each recording source */
+#define SOUND_MIXER_DEVMASK 0xfe /* Arg contains a bit for each supported device */
+#define SOUND_MIXER_RECMASK 0xfd /* Arg contains a bit for each supported recording source */
+#define SOUND_MIXER_CAPS 0xfc
+# define SOUND_CAP_EXCL_INPUT 0x00000001 /* Only one recording source at a time */
+#define SOUND_MIXER_STEREODEVS 0xfb /* Mixer channels supporting stereo */
+#define SOUND_MIXER_OUTSRC 0xfa /* Arg contains a bit for each input source to output */
+#define SOUND_MIXER_OUTMASK 0xf9 /* Arg contains a bit for each supported input source to output */
+
+/* Device mask bits */
+
+#define SOUND_MASK_VOLUME (1 << SOUND_MIXER_VOLUME)
+#define SOUND_MASK_BASS (1 << SOUND_MIXER_BASS)
+#define SOUND_MASK_TREBLE (1 << SOUND_MIXER_TREBLE)
+#define SOUND_MASK_SYNTH (1 << SOUND_MIXER_SYNTH)
+#define SOUND_MASK_PCM (1 << SOUND_MIXER_PCM)
+#define SOUND_MASK_SPEAKER (1 << SOUND_MIXER_SPEAKER)
+#define SOUND_MASK_LINE (1 << SOUND_MIXER_LINE)
+#define SOUND_MASK_MIC (1 << SOUND_MIXER_MIC)
+#define SOUND_MASK_CD (1 << SOUND_MIXER_CD)
+#define SOUND_MASK_IMIX (1 << SOUND_MIXER_IMIX)
+#define SOUND_MASK_ALTPCM (1 << SOUND_MIXER_ALTPCM)
+#define SOUND_MASK_RECLEV (1 << SOUND_MIXER_RECLEV)
+#define SOUND_MASK_IGAIN (1 << SOUND_MIXER_IGAIN)
+#define SOUND_MASK_OGAIN (1 << SOUND_MIXER_OGAIN)
+#define SOUND_MASK_LINE1 (1 << SOUND_MIXER_LINE1)
+#define SOUND_MASK_LINE2 (1 << SOUND_MIXER_LINE2)
+#define SOUND_MASK_LINE3 (1 << SOUND_MIXER_LINE3)
+#define SOUND_MASK_DIGITAL1 (1 << SOUND_MIXER_DIGITAL1)
+#define SOUND_MASK_DIGITAL2 (1 << SOUND_MIXER_DIGITAL2)
+#define SOUND_MASK_DIGITAL3 (1 << SOUND_MIXER_DIGITAL3)
+#define SOUND_MASK_PHONEIN (1 << SOUND_MIXER_PHONEIN)
+#define SOUND_MASK_PHONEOUT (1 << SOUND_MIXER_PHONEOUT)
+#define SOUND_MASK_RADIO (1 << SOUND_MIXER_RADIO)
+#define SOUND_MASK_VIDEO (1 << SOUND_MIXER_VIDEO)
+#define SOUND_MASK_MONITOR (1 << SOUND_MIXER_MONITOR)
+
+/* Obsolete macros */
+#define SOUND_MASK_MUTE (1 << SOUND_MIXER_MUTE)
+#define SOUND_MASK_ENHANCE (1 << SOUND_MIXER_ENHANCE)
+#define SOUND_MASK_LOUD (1 << SOUND_MIXER_LOUD)
+
+#define MIXER_READ(dev) _SIOR('M', dev, int)
+#define SOUND_MIXER_READ_VOLUME MIXER_READ(SOUND_MIXER_VOLUME)
+#define SOUND_MIXER_READ_BASS MIXER_READ(SOUND_MIXER_BASS)
+#define SOUND_MIXER_READ_TREBLE MIXER_READ(SOUND_MIXER_TREBLE)
+#define SOUND_MIXER_READ_SYNTH MIXER_READ(SOUND_MIXER_SYNTH)
+#define SOUND_MIXER_READ_PCM MIXER_READ(SOUND_MIXER_PCM)
+#define SOUND_MIXER_READ_SPEAKER MIXER_READ(SOUND_MIXER_SPEAKER)
+#define SOUND_MIXER_READ_LINE MIXER_READ(SOUND_MIXER_LINE)
+#define SOUND_MIXER_READ_MIC MIXER_READ(SOUND_MIXER_MIC)
+#define SOUND_MIXER_READ_CD MIXER_READ(SOUND_MIXER_CD)
+#define SOUND_MIXER_READ_IMIX MIXER_READ(SOUND_MIXER_IMIX)
+#define SOUND_MIXER_READ_ALTPCM MIXER_READ(SOUND_MIXER_ALTPCM)
+#define SOUND_MIXER_READ_RECLEV MIXER_READ(SOUND_MIXER_RECLEV)
+#define SOUND_MIXER_READ_IGAIN MIXER_READ(SOUND_MIXER_IGAIN)
+#define SOUND_MIXER_READ_OGAIN MIXER_READ(SOUND_MIXER_OGAIN)
+#define SOUND_MIXER_READ_LINE1 MIXER_READ(SOUND_MIXER_LINE1)
+#define SOUND_MIXER_READ_LINE2 MIXER_READ(SOUND_MIXER_LINE2)
+#define SOUND_MIXER_READ_LINE3 MIXER_READ(SOUND_MIXER_LINE3)
+
+/* Obsolete macros */
+#define SOUND_MIXER_READ_MUTE MIXER_READ(SOUND_MIXER_MUTE)
+#define SOUND_MIXER_READ_ENHANCE MIXER_READ(SOUND_MIXER_ENHANCE)
+#define SOUND_MIXER_READ_LOUD MIXER_READ(SOUND_MIXER_LOUD)
+
+#define SOUND_MIXER_READ_RECSRC MIXER_READ(SOUND_MIXER_RECSRC)
+#define SOUND_MIXER_READ_DEVMASK MIXER_READ(SOUND_MIXER_DEVMASK)
+#define SOUND_MIXER_READ_RECMASK MIXER_READ(SOUND_MIXER_RECMASK)
+#define SOUND_MIXER_READ_STEREODEVS MIXER_READ(SOUND_MIXER_STEREODEVS)
+#define SOUND_MIXER_READ_CAPS MIXER_READ(SOUND_MIXER_CAPS)
+
+#define MIXER_WRITE(dev) _SIOWR('M', dev, int)
+#define SOUND_MIXER_WRITE_VOLUME MIXER_WRITE(SOUND_MIXER_VOLUME)
+#define SOUND_MIXER_WRITE_BASS MIXER_WRITE(SOUND_MIXER_BASS)
+#define SOUND_MIXER_WRITE_TREBLE MIXER_WRITE(SOUND_MIXER_TREBLE)
+#define SOUND_MIXER_WRITE_SYNTH MIXER_WRITE(SOUND_MIXER_SYNTH)
+#define SOUND_MIXER_WRITE_PCM MIXER_WRITE(SOUND_MIXER_PCM)
+#define SOUND_MIXER_WRITE_SPEAKER MIXER_WRITE(SOUND_MIXER_SPEAKER)
+#define SOUND_MIXER_WRITE_LINE MIXER_WRITE(SOUND_MIXER_LINE)
+#define SOUND_MIXER_WRITE_MIC MIXER_WRITE(SOUND_MIXER_MIC)
+#define SOUND_MIXER_WRITE_CD MIXER_WRITE(SOUND_MIXER_CD)
+#define SOUND_MIXER_WRITE_IMIX MIXER_WRITE(SOUND_MIXER_IMIX)
+#define SOUND_MIXER_WRITE_ALTPCM MIXER_WRITE(SOUND_MIXER_ALTPCM)
+#define SOUND_MIXER_WRITE_RECLEV MIXER_WRITE(SOUND_MIXER_RECLEV)
+#define SOUND_MIXER_WRITE_IGAIN MIXER_WRITE(SOUND_MIXER_IGAIN)
+#define SOUND_MIXER_WRITE_OGAIN MIXER_WRITE(SOUND_MIXER_OGAIN)
+#define SOUND_MIXER_WRITE_LINE1 MIXER_WRITE(SOUND_MIXER_LINE1)
+#define SOUND_MIXER_WRITE_LINE2 MIXER_WRITE(SOUND_MIXER_LINE2)
+#define SOUND_MIXER_WRITE_LINE3 MIXER_WRITE(SOUND_MIXER_LINE3)
+
+/* Obsolete macros */
+#define SOUND_MIXER_WRITE_MUTE MIXER_WRITE(SOUND_MIXER_MUTE)
+#define SOUND_MIXER_WRITE_ENHANCE MIXER_WRITE(SOUND_MIXER_ENHANCE)
+#define SOUND_MIXER_WRITE_LOUD MIXER_WRITE(SOUND_MIXER_LOUD)
+
+#define SOUND_MIXER_WRITE_RECSRC MIXER_WRITE(SOUND_MIXER_RECSRC)
+
+typedef struct mixer_info
+{
+ char id[16];
+ char name[32];
+ int modify_counter;
+ int fillers[10];
+} mixer_info;
+
+typedef struct _old_mixer_info /* Obsolete */
+{
+ char id[16];
+ char name[32];
+} _old_mixer_info;
+
+#define SOUND_MIXER_INFO _SIOR ('M', 101, mixer_info)
+#define SOUND_OLD_MIXER_INFO _SIOR ('M', 101, _old_mixer_info)
+
+/*
+ * A mechanism for accessing "proprietary" mixer features. This method
+ * permits passing 128 bytes of arbitrary data between a mixer application
+ * and the mixer driver. Interpretation of the record is defined by
+ * the particular mixer driver.
+ */
+typedef unsigned char mixer_record[128];
+
+#define SOUND_MIXER_ACCESS _SIOWR('M', 102, mixer_record)
+
+/*
+ * Two ioctls for special souncard function
+ */
+#define SOUND_MIXER_AGC _SIOWR('M', 103, int)
+#define SOUND_MIXER_3DSE _SIOWR('M', 104, int)
+
+/*
+ * The SOUND_MIXER_PRIVATE# commands can be redefined by low level drivers.
+ * These features can be used when accessing device specific features.
+ */
+#define SOUND_MIXER_PRIVATE1 _SIOWR('M', 111, int)
+#define SOUND_MIXER_PRIVATE2 _SIOWR('M', 112, int)
+#define SOUND_MIXER_PRIVATE3 _SIOWR('M', 113, int)
+#define SOUND_MIXER_PRIVATE4 _SIOWR('M', 114, int)
+#define SOUND_MIXER_PRIVATE5 _SIOWR('M', 115, int)
+
+/*
+ * SOUND_MIXER_GETLEVELS and SOUND_MIXER_SETLEVELS calls can be used
+ * for querying current mixer settings from the driver and for loading
+ * default volume settings _prior_ activating the mixer (loading
+ * doesn't affect current state of the mixer hardware). These calls
+ * are for internal use only.
+ */
+
+typedef struct mixer_vol_table {
+ int num; /* Index to volume table */
+ char name[32];
+ int levels[32];
+} mixer_vol_table;
+
+#define SOUND_MIXER_GETLEVELS _SIOWR('M', 116, mixer_vol_table)
+#define SOUND_MIXER_SETLEVELS _SIOWR('M', 117, mixer_vol_table)
+
+/*
+ * An ioctl for identifying the driver version. It will return value
+ * of the SOUND_VERSION macro used when compiling the driver.
+ * This call was introduced in OSS version 3.6 and it will not work
+ * with earlier versions (returns EINVAL).
+ */
+#define OSS_GETVERSION _SIOR ('M', 118, int)
+
+/*
+ * Level 2 event types for /dev/sequencer
+ */
+
+/*
+ * The 4 most significant bits of byte 0 specify the class of
+ * the event:
+ *
+ * 0x8X = system level events,
+ * 0x9X = device/port specific events, event[1] = device/port,
+ * The last 4 bits give the subtype:
+ * 0x02 = Channel event (event[3] = chn).
+ * 0x01 = note event (event[4] = note).
+ * (0x01 is not used alone but always with bit 0x02).
+ * event[2] = MIDI message code (0x80=note off etc.)
+ *
+ */
+
+#define EV_SEQ_LOCAL 0x80
+#define EV_TIMING 0x81
+#define EV_CHN_COMMON 0x92
+#define EV_CHN_VOICE 0x93
+#define EV_SYSEX 0x94
+/*
+ * Event types 200 to 220 are reserved for application use.
+ * These numbers will not be used by the driver.
+ */
+
+/*
+ * Events for event type EV_CHN_VOICE
+ */
+
+#define MIDI_NOTEOFF 0x80
+#define MIDI_NOTEON 0x90
+#define MIDI_KEY_PRESSURE 0xA0
+
+/*
+ * Events for event type EV_CHN_COMMON
+ */
+
+#define MIDI_CTL_CHANGE 0xB0
+#define MIDI_PGM_CHANGE 0xC0
+#define MIDI_CHN_PRESSURE 0xD0
+#define MIDI_PITCH_BEND 0xE0
+
+#define MIDI_SYSTEM_PREFIX 0xF0
+
+/*
+ * Timer event types
+ */
+#define TMR_WAIT_REL 1 /* Time relative to the prev time */
+#define TMR_WAIT_ABS 2 /* Absolute time since TMR_START */
+#define TMR_STOP 3
+#define TMR_START 4
+#define TMR_CONTINUE 5
+#define TMR_TEMPO 6
+#define TMR_ECHO 8
+#define TMR_CLOCK 9 /* MIDI clock */
+#define TMR_SPP 10 /* Song position pointer */
+#define TMR_TIMESIG 11 /* Time signature */
+
+/*
+ * Local event types
+ */
+#define LOCL_STARTAUDIO 1
+
+#if !defined(__KERNEL__) || defined(USE_SEQ_MACROS)
+/*
+ * Some convenience macros to simplify programming of the
+ * /dev/sequencer interface
+ *
+ * This is a legacy interface for applications written against
+ * the OSSlib-3.8 style interface. It is no longer possible
+ * to actually link against OSSlib with this header, but we
+ * still provide these macros for programs using them.
+ *
+ * If you want to use OSSlib, it is recommended that you get
+ * the GPL version of OSS-4.x and build against that version
+ * of the header.
+ *
+ * We redefine the extern keyword so that make headers_check
+ * does not complain about SEQ_USE_EXTBUF.
+ */
+#define SEQ_DECLAREBUF() SEQ_USE_EXTBUF()
+
+void seqbuf_dump(void); /* This function must be provided by programs */
+
+#define SEQ_PM_DEFINES int __foo_bar___
+
+#define SEQ_LOAD_GMINSTR(dev, instr)
+#define SEQ_LOAD_GMDRUM(dev, drum)
+
+#define _SEQ_EXTERN extern
+#define SEQ_USE_EXTBUF() \
+ _SEQ_EXTERN unsigned char _seqbuf[]; \
+ _SEQ_EXTERN int _seqbuflen; _SEQ_EXTERN int _seqbufptr
+
+#ifndef USE_SIMPLE_MACROS
+/* Sample seqbuf_dump() implementation:
+ *
+ * SEQ_DEFINEBUF (2048); -- Defines a buffer for 2048 bytes
+ *
+ * int seqfd; -- The file descriptor for /dev/sequencer.
+ *
+ * void
+ * seqbuf_dump ()
+ * {
+ * if (_seqbufptr)
+ * if (write (seqfd, _seqbuf, _seqbufptr) == -1)
+ * {
+ * perror ("write /dev/sequencer");
+ * exit (-1);
+ * }
+ * _seqbufptr = 0;
+ * }
+ */
+
+#define SEQ_DEFINEBUF(len) unsigned char _seqbuf[len]; int _seqbuflen = len;int _seqbufptr = 0
+#define _SEQ_NEEDBUF(len) if ((_seqbufptr+(len)) > _seqbuflen) seqbuf_dump()
+#define _SEQ_ADVBUF(len) _seqbufptr += len
+#define SEQ_DUMPBUF seqbuf_dump
+#else
+/*
+ * This variation of the sequencer macros is used just to format one event
+ * using fixed buffer.
+ *
+ * The program using the macro library must define the following macros before
+ * using this library.
+ *
+ * #define _seqbuf name of the buffer (unsigned char[])
+ * #define _SEQ_ADVBUF(len) If the applic needs to know the exact
+ * size of the event, this macro can be used.
+ * Otherwise this must be defined as empty.
+ * #define _seqbufptr Define the name of index variable or 0 if
+ * not required.
+ */
+#define _SEQ_NEEDBUF(len) /* empty */
+#endif
+
+#define SEQ_VOLUME_MODE(dev, mode) {_SEQ_NEEDBUF(8);\
+ _seqbuf[_seqbufptr] = SEQ_EXTENDED;\
+ _seqbuf[_seqbufptr+1] = SEQ_VOLMODE;\
+ _seqbuf[_seqbufptr+2] = (dev);\
+ _seqbuf[_seqbufptr+3] = (mode);\
+ _seqbuf[_seqbufptr+4] = 0;\
+ _seqbuf[_seqbufptr+5] = 0;\
+ _seqbuf[_seqbufptr+6] = 0;\
+ _seqbuf[_seqbufptr+7] = 0;\
+ _SEQ_ADVBUF(8);}
+
+/*
+ * Midi voice messages
+ */
+
+#define _CHN_VOICE(dev, event, chn, note, parm) \
+ {_SEQ_NEEDBUF(8);\
+ _seqbuf[_seqbufptr] = EV_CHN_VOICE;\
+ _seqbuf[_seqbufptr+1] = (dev);\
+ _seqbuf[_seqbufptr+2] = (event);\
+ _seqbuf[_seqbufptr+3] = (chn);\
+ _seqbuf[_seqbufptr+4] = (note);\
+ _seqbuf[_seqbufptr+5] = (parm);\
+ _seqbuf[_seqbufptr+6] = (0);\
+ _seqbuf[_seqbufptr+7] = 0;\
+ _SEQ_ADVBUF(8);}
+
+#define SEQ_START_NOTE(dev, chn, note, vol) \
+ _CHN_VOICE(dev, MIDI_NOTEON, chn, note, vol)
+
+#define SEQ_STOP_NOTE(dev, chn, note, vol) \
+ _CHN_VOICE(dev, MIDI_NOTEOFF, chn, note, vol)
+
+#define SEQ_KEY_PRESSURE(dev, chn, note, pressure) \
+ _CHN_VOICE(dev, MIDI_KEY_PRESSURE, chn, note, pressure)
+
+/*
+ * Midi channel messages
+ */
+
+#define _CHN_COMMON(dev, event, chn, p1, p2, w14) \
+ {_SEQ_NEEDBUF(8);\
+ _seqbuf[_seqbufptr] = EV_CHN_COMMON;\
+ _seqbuf[_seqbufptr+1] = (dev);\
+ _seqbuf[_seqbufptr+2] = (event);\
+ _seqbuf[_seqbufptr+3] = (chn);\
+ _seqbuf[_seqbufptr+4] = (p1);\
+ _seqbuf[_seqbufptr+5] = (p2);\
+ *(short *)&_seqbuf[_seqbufptr+6] = (w14);\
+ _SEQ_ADVBUF(8);}
+/*
+ * SEQ_SYSEX permits sending of sysex messages. (It may look that it permits
+ * sending any MIDI bytes but it's absolutely not possible. Trying to do
+ * so _will_ cause problems with MPU401 intelligent mode).
+ *
+ * Sysex messages are sent in blocks of 1 to 6 bytes. Longer messages must be
+ * sent by calling SEQ_SYSEX() several times (there must be no other events
+ * between them). First sysex fragment must have 0xf0 in the first byte
+ * and the last byte (buf[len-1] of the last fragment must be 0xf7. No byte
+ * between these sysex start and end markers cannot be larger than 0x7f. Also
+ * lengths of each fragments (except the last one) must be 6.
+ *
+ * Breaking the above rules may work with some MIDI ports but is likely to
+ * cause fatal problems with some other devices (such as MPU401).
+ */
+#define SEQ_SYSEX(dev, buf, len) \
+ {int ii, ll=(len); \
+ unsigned char *bufp=buf;\
+ if (ll>6)ll=6;\
+ _SEQ_NEEDBUF(8);\
+ _seqbuf[_seqbufptr] = EV_SYSEX;\
+ _seqbuf[_seqbufptr+1] = (dev);\
+ for(ii=0;ii<ll;ii++)\
+ _seqbuf[_seqbufptr+ii+2] = bufp[ii];\
+ for(ii=ll;ii<6;ii++)\
+ _seqbuf[_seqbufptr+ii+2] = 0xff;\
+ _SEQ_ADVBUF(8);}
+
+#define SEQ_CHN_PRESSURE(dev, chn, pressure) \
+ _CHN_COMMON(dev, MIDI_CHN_PRESSURE, chn, pressure, 0, 0)
+
+#define SEQ_SET_PATCH SEQ_PGM_CHANGE
+#define SEQ_PGM_CHANGE(dev, chn, patch) \
+ _CHN_COMMON(dev, MIDI_PGM_CHANGE, chn, patch, 0, 0)
+
+#define SEQ_CONTROL(dev, chn, controller, value) \
+ _CHN_COMMON(dev, MIDI_CTL_CHANGE, chn, controller, 0, value)
+
+#define SEQ_BENDER(dev, chn, value) \
+ _CHN_COMMON(dev, MIDI_PITCH_BEND, chn, 0, 0, value)
+
+
+#define SEQ_V2_X_CONTROL(dev, voice, controller, value) {_SEQ_NEEDBUF(8);\
+ _seqbuf[_seqbufptr] = SEQ_EXTENDED;\
+ _seqbuf[_seqbufptr+1] = SEQ_CONTROLLER;\
+ _seqbuf[_seqbufptr+2] = (dev);\
+ _seqbuf[_seqbufptr+3] = (voice);\
+ _seqbuf[_seqbufptr+4] = (controller);\
+ _seqbuf[_seqbufptr+5] = ((value)&0xff);\
+ _seqbuf[_seqbufptr+6] = ((value>>8)&0xff);\
+ _seqbuf[_seqbufptr+7] = 0;\
+ _SEQ_ADVBUF(8);}
+/*
+ * The following 5 macros are incorrectly implemented and obsolete.
+ * Use SEQ_BENDER and SEQ_CONTROL (with proper controller) instead.
+ */
+#define SEQ_PITCHBEND(dev, voice, value) SEQ_V2_X_CONTROL(dev, voice, CTRL_PITCH_BENDER, value)
+#define SEQ_BENDER_RANGE(dev, voice, value) SEQ_V2_X_CONTROL(dev, voice, CTRL_PITCH_BENDER_RANGE, value)
+#define SEQ_EXPRESSION(dev, voice, value) SEQ_CONTROL(dev, voice, CTL_EXPRESSION, value*128)
+#define SEQ_MAIN_VOLUME(dev, voice, value) SEQ_CONTROL(dev, voice, CTL_MAIN_VOLUME, (value*16383)/100)
+#define SEQ_PANNING(dev, voice, pos) SEQ_CONTROL(dev, voice, CTL_PAN, (pos+128) / 2)
+
+/*
+ * Timing and synchronization macros
+ */
+
+#define _TIMER_EVENT(ev, parm) {_SEQ_NEEDBUF(8);\
+ _seqbuf[_seqbufptr+0] = EV_TIMING; \
+ _seqbuf[_seqbufptr+1] = (ev); \
+ _seqbuf[_seqbufptr+2] = 0;\
+ _seqbuf[_seqbufptr+3] = 0;\
+ *(unsigned int *)&_seqbuf[_seqbufptr+4] = (parm); \
+ _SEQ_ADVBUF(8);}
+
+#define SEQ_START_TIMER() _TIMER_EVENT(TMR_START, 0)
+#define SEQ_STOP_TIMER() _TIMER_EVENT(TMR_STOP, 0)
+#define SEQ_CONTINUE_TIMER() _TIMER_EVENT(TMR_CONTINUE, 0)
+#define SEQ_WAIT_TIME(ticks) _TIMER_EVENT(TMR_WAIT_ABS, ticks)
+#define SEQ_DELTA_TIME(ticks) _TIMER_EVENT(TMR_WAIT_REL, ticks)
+#define SEQ_ECHO_BACK(key) _TIMER_EVENT(TMR_ECHO, key)
+#define SEQ_SET_TEMPO(value) _TIMER_EVENT(TMR_TEMPO, value)
+#define SEQ_SONGPOS(pos) _TIMER_EVENT(TMR_SPP, pos)
+#define SEQ_TIME_SIGNATURE(sig) _TIMER_EVENT(TMR_TIMESIG, sig)
+
+/*
+ * Local control events
+ */
+
+#define _LOCAL_EVENT(ev, parm) {_SEQ_NEEDBUF(8);\
+ _seqbuf[_seqbufptr+0] = EV_SEQ_LOCAL; \
+ _seqbuf[_seqbufptr+1] = (ev); \
+ _seqbuf[_seqbufptr+2] = 0;\
+ _seqbuf[_seqbufptr+3] = 0;\
+ *(unsigned int *)&_seqbuf[_seqbufptr+4] = (parm); \
+ _SEQ_ADVBUF(8);}
+
+#define SEQ_PLAYAUDIO(devmask) _LOCAL_EVENT(LOCL_STARTAUDIO, devmask)
+/*
+ * Events for the level 1 interface only
+ */
+
+#define SEQ_MIDIOUT(device, byte) {_SEQ_NEEDBUF(4);\
+ _seqbuf[_seqbufptr] = SEQ_MIDIPUTC;\
+ _seqbuf[_seqbufptr+1] = (byte);\
+ _seqbuf[_seqbufptr+2] = (device);\
+ _seqbuf[_seqbufptr+3] = 0;\
+ _SEQ_ADVBUF(4);}
+
+/*
+ * Patch loading.
+ */
+#define SEQ_WRPATCH(patchx, len) \
+ {if (_seqbufptr) SEQ_DUMPBUF();\
+ if (write(seqfd, (char*)(patchx), len)==-1) \
+ perror("Write patch: /dev/sequencer");}
+#define SEQ_WRPATCH2(patchx, len) \
+ (SEQ_DUMPBUF(), write(seqfd, (char*)(patchx), len))
+
+#endif
+#endif /* _UAPISOUNDCARD_H */
diff --git a/include/uapi/linux/stat.h b/include/uapi/linux/stat.h
new file mode 100644
index 0000000..7fec7e3
--- /dev/null
+++ b/include/uapi/linux/stat.h
@@ -0,0 +1,45 @@
+#ifndef _UAPI_LINUX_STAT_H
+#define _UAPI_LINUX_STAT_H
+
+
+#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
+
+#define S_IFMT 00170000
+#define S_IFSOCK 0140000
+#define S_IFLNK 0120000
+#define S_IFREG 0100000
+#define S_IFBLK 0060000
+#define S_IFDIR 0040000
+#define S_IFCHR 0020000
+#define S_IFIFO 0010000
+#define S_ISUID 0004000
+#define S_ISGID 0002000
+#define S_ISVTX 0001000
+
+#define S_ISLNK(m) (((m) & S_IFMT) == S_IFLNK)
+#define S_ISREG(m) (((m) & S_IFMT) == S_IFREG)
+#define S_ISDIR(m) (((m) & S_IFMT) == S_IFDIR)
+#define S_ISCHR(m) (((m) & S_IFMT) == S_IFCHR)
+#define S_ISBLK(m) (((m) & S_IFMT) == S_IFBLK)
+#define S_ISFIFO(m) (((m) & S_IFMT) == S_IFIFO)
+#define S_ISSOCK(m) (((m) & S_IFMT) == S_IFSOCK)
+
+#define S_IRWXU 00700
+#define S_IRUSR 00400
+#define S_IWUSR 00200
+#define S_IXUSR 00100
+
+#define S_IRWXG 00070
+#define S_IRGRP 00040
+#define S_IWGRP 00020
+#define S_IXGRP 00010
+
+#define S_IRWXO 00007
+#define S_IROTH 00004
+#define S_IWOTH 00002
+#define S_IXOTH 00001
+
+#endif
+
+
+#endif /* _UAPI_LINUX_STAT_H */
diff --git a/include/uapi/linux/stddef.h b/include/uapi/linux/stddef.h
new file mode 100644
index 0000000..aa9f104
--- /dev/null
+++ b/include/uapi/linux/stddef.h
@@ -0,0 +1 @@
+#include <linux/compiler.h>
diff --git a/include/uapi/linux/string.h b/include/uapi/linux/string.h
new file mode 100644
index 0000000..e32e545
--- /dev/null
+++ b/include/uapi/linux/string.h
@@ -0,0 +1,9 @@
+#ifndef _UAPI_LINUX_STRING_H_
+#define _UAPI_LINUX_STRING_H_
+
+/* We don't want strings.h stuff being used by user stuff by accident */
+
+#ifndef __KERNEL__
+#include <string.h>
+#endif /* __KERNEL__ */
+#endif /* _UAPI_LINUX_STRING_H_ */
diff --git a/include/linux/suspend_ioctls.h b/include/uapi/linux/suspend_ioctls.h
similarity index 100%
rename from include/linux/suspend_ioctls.h
rename to include/uapi/linux/suspend_ioctls.h
diff --git a/include/uapi/linux/swab.h b/include/uapi/linux/swab.h
new file mode 100644
index 0000000..e811474
--- /dev/null
+++ b/include/uapi/linux/swab.h
@@ -0,0 +1,282 @@
+#ifndef _UAPI_LINUX_SWAB_H
+#define _UAPI_LINUX_SWAB_H
+
+#include <linux/types.h>
+#include <linux/compiler.h>
+#include <asm/swab.h>
+
+/*
+ * casts are necessary for constants, because we never know how for sure
+ * how U/UL/ULL map to __u16, __u32, __u64. At least not in a portable way.
+ */
+#define ___constant_swab16(x) ((__u16)( \
+ (((__u16)(x) & (__u16)0x00ffU) << 8) | \
+ (((__u16)(x) & (__u16)0xff00U) >> 8)))
+
+#define ___constant_swab32(x) ((__u32)( \
+ (((__u32)(x) & (__u32)0x000000ffUL) << 24) | \
+ (((__u32)(x) & (__u32)0x0000ff00UL) << 8) | \
+ (((__u32)(x) & (__u32)0x00ff0000UL) >> 8) | \
+ (((__u32)(x) & (__u32)0xff000000UL) >> 24)))
+
+#define ___constant_swab64(x) ((__u64)( \
+ (((__u64)(x) & (__u64)0x00000000000000ffULL) << 56) | \
+ (((__u64)(x) & (__u64)0x000000000000ff00ULL) << 40) | \
+ (((__u64)(x) & (__u64)0x0000000000ff0000ULL) << 24) | \
+ (((__u64)(x) & (__u64)0x00000000ff000000ULL) << 8) | \
+ (((__u64)(x) & (__u64)0x000000ff00000000ULL) >> 8) | \
+ (((__u64)(x) & (__u64)0x0000ff0000000000ULL) >> 24) | \
+ (((__u64)(x) & (__u64)0x00ff000000000000ULL) >> 40) | \
+ (((__u64)(x) & (__u64)0xff00000000000000ULL) >> 56)))
+
+#define ___constant_swahw32(x) ((__u32)( \
+ (((__u32)(x) & (__u32)0x0000ffffUL) << 16) | \
+ (((__u32)(x) & (__u32)0xffff0000UL) >> 16)))
+
+#define ___constant_swahb32(x) ((__u32)( \
+ (((__u32)(x) & (__u32)0x00ff00ffUL) << 8) | \
+ (((__u32)(x) & (__u32)0xff00ff00UL) >> 8)))
+
+/*
+ * Implement the following as inlines, but define the interface using
+ * macros to allow constant folding when possible:
+ * ___swab16, ___swab32, ___swab64, ___swahw32, ___swahb32
+ */
+
+static inline __attribute_const__ __u16 __fswab16(__u16 val)
+{
+#ifdef __arch_swab16
+ return __arch_swab16(val);
+#else
+ return ___constant_swab16(val);
+#endif
+}
+
+static inline __attribute_const__ __u32 __fswab32(__u32 val)
+{
+#ifdef __arch_swab32
+ return __arch_swab32(val);
+#else
+ return ___constant_swab32(val);
+#endif
+}
+
+static inline __attribute_const__ __u64 __fswab64(__u64 val)
+{
+#ifdef __arch_swab64
+ return __arch_swab64(val);
+#elif defined(__SWAB_64_THRU_32__)
+ __u32 h = val >> 32;
+ __u32 l = val & ((1ULL << 32) - 1);
+ return (((__u64)__fswab32(l)) << 32) | ((__u64)(__fswab32(h)));
+#else
+ return ___constant_swab64(val);
+#endif
+}
+
+static inline __attribute_const__ __u32 __fswahw32(__u32 val)
+{
+#ifdef __arch_swahw32
+ return __arch_swahw32(val);
+#else
+ return ___constant_swahw32(val);
+#endif
+}
+
+static inline __attribute_const__ __u32 __fswahb32(__u32 val)
+{
+#ifdef __arch_swahb32
+ return __arch_swahb32(val);
+#else
+ return ___constant_swahb32(val);
+#endif
+}
+
+/**
+ * __swab16 - return a byteswapped 16-bit value
+ * @x: value to byteswap
+ */
+#define __swab16(x) \
+ (__builtin_constant_p((__u16)(x)) ? \
+ ___constant_swab16(x) : \
+ __fswab16(x))
+
+/**
+ * __swab32 - return a byteswapped 32-bit value
+ * @x: value to byteswap
+ */
+#define __swab32(x) \
+ (__builtin_constant_p((__u32)(x)) ? \
+ ___constant_swab32(x) : \
+ __fswab32(x))
+
+/**
+ * __swab64 - return a byteswapped 64-bit value
+ * @x: value to byteswap
+ */
+#define __swab64(x) \
+ (__builtin_constant_p((__u64)(x)) ? \
+ ___constant_swab64(x) : \
+ __fswab64(x))
+
+/**
+ * __swahw32 - return a word-swapped 32-bit value
+ * @x: value to wordswap
+ *
+ * __swahw32(0x12340000) is 0x00001234
+ */
+#define __swahw32(x) \
+ (__builtin_constant_p((__u32)(x)) ? \
+ ___constant_swahw32(x) : \
+ __fswahw32(x))
+
+/**
+ * __swahb32 - return a high and low byte-swapped 32-bit value
+ * @x: value to byteswap
+ *
+ * __swahb32(0x12345678) is 0x34127856
+ */
+#define __swahb32(x) \
+ (__builtin_constant_p((__u32)(x)) ? \
+ ___constant_swahb32(x) : \
+ __fswahb32(x))
+
+/**
+ * __swab16p - return a byteswapped 16-bit value from a pointer
+ * @p: pointer to a naturally-aligned 16-bit value
+ */
+static inline __u16 __swab16p(const __u16 *p)
+{
+#ifdef __arch_swab16p
+ return __arch_swab16p(p);
+#else
+ return __swab16(*p);
+#endif
+}
+
+/**
+ * __swab32p - return a byteswapped 32-bit value from a pointer
+ * @p: pointer to a naturally-aligned 32-bit value
+ */
+static inline __u32 __swab32p(const __u32 *p)
+{
+#ifdef __arch_swab32p
+ return __arch_swab32p(p);
+#else
+ return __swab32(*p);
+#endif
+}
+
+/**
+ * __swab64p - return a byteswapped 64-bit value from a pointer
+ * @p: pointer to a naturally-aligned 64-bit value
+ */
+static inline __u64 __swab64p(const __u64 *p)
+{
+#ifdef __arch_swab64p
+ return __arch_swab64p(p);
+#else
+ return __swab64(*p);
+#endif
+}
+
+/**
+ * __swahw32p - return a wordswapped 32-bit value from a pointer
+ * @p: pointer to a naturally-aligned 32-bit value
+ *
+ * See __swahw32() for details of wordswapping.
+ */
+static inline __u32 __swahw32p(const __u32 *p)
+{
+#ifdef __arch_swahw32p
+ return __arch_swahw32p(p);
+#else
+ return __swahw32(*p);
+#endif
+}
+
+/**
+ * __swahb32p - return a high and low byteswapped 32-bit value from a pointer
+ * @p: pointer to a naturally-aligned 32-bit value
+ *
+ * See __swahb32() for details of high/low byteswapping.
+ */
+static inline __u32 __swahb32p(const __u32 *p)
+{
+#ifdef __arch_swahb32p
+ return __arch_swahb32p(p);
+#else
+ return __swahb32(*p);
+#endif
+}
+
+/**
+ * __swab16s - byteswap a 16-bit value in-place
+ * @p: pointer to a naturally-aligned 16-bit value
+ */
+static inline void __swab16s(__u16 *p)
+{
+#ifdef __arch_swab16s
+ __arch_swab16s(p);
+#else
+ *p = __swab16p(p);
+#endif
+}
+/**
+ * __swab32s - byteswap a 32-bit value in-place
+ * @p: pointer to a naturally-aligned 32-bit value
+ */
+static inline void __swab32s(__u32 *p)
+{
+#ifdef __arch_swab32s
+ __arch_swab32s(p);
+#else
+ *p = __swab32p(p);
+#endif
+}
+
+/**
+ * __swab64s - byteswap a 64-bit value in-place
+ * @p: pointer to a naturally-aligned 64-bit value
+ */
+static inline void __swab64s(__u64 *p)
+{
+#ifdef __arch_swab64s
+ __arch_swab64s(p);
+#else
+ *p = __swab64p(p);
+#endif
+}
+
+/**
+ * __swahw32s - wordswap a 32-bit value in-place
+ * @p: pointer to a naturally-aligned 32-bit value
+ *
+ * See __swahw32() for details of wordswapping
+ */
+static inline void __swahw32s(__u32 *p)
+{
+#ifdef __arch_swahw32s
+ __arch_swahw32s(p);
+#else
+ *p = __swahw32p(p);
+#endif
+}
+
+/**
+ * __swahb32s - high and low byteswap a 32-bit value in-place
+ * @p: pointer to a naturally-aligned 32-bit value
+ *
+ * See __swahb32() for details of high and low byte swapping
+ */
+static inline void __swahb32s(__u32 *p)
+{
+#ifdef __arch_swahb32s
+ __arch_swahb32s(p);
+#else
+ *p = __swahb32p(p);
+#endif
+}
+
+
+#endif /* _UAPI_LINUX_SWAB_H */
diff --git a/include/uapi/linux/synclink.h b/include/uapi/linux/synclink.h
new file mode 100644
index 0000000..7dcb065
--- /dev/null
+++ b/include/uapi/linux/synclink.h
@@ -0,0 +1,300 @@
+/*
+ * SyncLink Multiprotocol Serial Adapter Driver
+ *
+ * $Id: synclink.h,v 3.14 2006/07/17 20:15:43 paulkf Exp $
+ *
+ * Copyright (C) 1998-2000 by Microgate Corporation
+ *
+ * Redistribution of this file is permitted under
+ * the terms of the GNU Public License (GPL)
+ */
+
+#ifndef _UAPI_SYNCLINK_H_
+#define _UAPI_SYNCLINK_H_
+#define SYNCLINK_H_VERSION 3.6
+
+#include <linux/types.h>
+
+#define BIT0 0x0001
+#define BIT1 0x0002
+#define BIT2 0x0004
+#define BIT3 0x0008
+#define BIT4 0x0010
+#define BIT5 0x0020
+#define BIT6 0x0040
+#define BIT7 0x0080
+#define BIT8 0x0100
+#define BIT9 0x0200
+#define BIT10 0x0400
+#define BIT11 0x0800
+#define BIT12 0x1000
+#define BIT13 0x2000
+#define BIT14 0x4000
+#define BIT15 0x8000
+#define BIT16 0x00010000
+#define BIT17 0x00020000
+#define BIT18 0x00040000
+#define BIT19 0x00080000
+#define BIT20 0x00100000
+#define BIT21 0x00200000
+#define BIT22 0x00400000
+#define BIT23 0x00800000
+#define BIT24 0x01000000
+#define BIT25 0x02000000
+#define BIT26 0x04000000
+#define BIT27 0x08000000
+#define BIT28 0x10000000
+#define BIT29 0x20000000
+#define BIT30 0x40000000
+#define BIT31 0x80000000
+
+
+#define HDLC_MAX_FRAME_SIZE 65535
+#define MAX_ASYNC_TRANSMIT 4096
+#define MAX_ASYNC_BUFFER_SIZE 4096
+
+#define ASYNC_PARITY_NONE 0
+#define ASYNC_PARITY_EVEN 1
+#define ASYNC_PARITY_ODD 2
+#define ASYNC_PARITY_SPACE 3
+
+#define HDLC_FLAG_UNDERRUN_ABORT7 0x0000
+#define HDLC_FLAG_UNDERRUN_ABORT15 0x0001
+#define HDLC_FLAG_UNDERRUN_FLAG 0x0002
+#define HDLC_FLAG_UNDERRUN_CRC 0x0004
+#define HDLC_FLAG_SHARE_ZERO 0x0010
+#define HDLC_FLAG_AUTO_CTS 0x0020
+#define HDLC_FLAG_AUTO_DCD 0x0040
+#define HDLC_FLAG_AUTO_RTS 0x0080
+#define HDLC_FLAG_RXC_DPLL 0x0100
+#define HDLC_FLAG_RXC_BRG 0x0200
+#define HDLC_FLAG_RXC_TXCPIN 0x8000
+#define HDLC_FLAG_RXC_RXCPIN 0x0000
+#define HDLC_FLAG_TXC_DPLL 0x0400
+#define HDLC_FLAG_TXC_BRG 0x0800
+#define HDLC_FLAG_TXC_TXCPIN 0x0000
+#define HDLC_FLAG_TXC_RXCPIN 0x0008
+#define HDLC_FLAG_DPLL_DIV8 0x1000
+#define HDLC_FLAG_DPLL_DIV16 0x2000
+#define HDLC_FLAG_DPLL_DIV32 0x0000
+#define HDLC_FLAG_HDLC_LOOPMODE 0x4000
+
+#define HDLC_CRC_NONE 0
+#define HDLC_CRC_16_CCITT 1
+#define HDLC_CRC_32_CCITT 2
+#define HDLC_CRC_MASK 0x00ff
+#define HDLC_CRC_RETURN_EX 0x8000
+
+#define RX_OK 0
+#define RX_CRC_ERROR 1
+
+#define HDLC_TXIDLE_FLAGS 0
+#define HDLC_TXIDLE_ALT_ZEROS_ONES 1
+#define HDLC_TXIDLE_ZEROS 2
+#define HDLC_TXIDLE_ONES 3
+#define HDLC_TXIDLE_ALT_MARK_SPACE 4
+#define HDLC_TXIDLE_SPACE 5
+#define HDLC_TXIDLE_MARK 6
+#define HDLC_TXIDLE_CUSTOM_8 0x10000000
+#define HDLC_TXIDLE_CUSTOM_16 0x20000000
+
+#define HDLC_ENCODING_NRZ 0
+#define HDLC_ENCODING_NRZB 1
+#define HDLC_ENCODING_NRZI_MARK 2
+#define HDLC_ENCODING_NRZI_SPACE 3
+#define HDLC_ENCODING_NRZI HDLC_ENCODING_NRZI_SPACE
+#define HDLC_ENCODING_BIPHASE_MARK 4
+#define HDLC_ENCODING_BIPHASE_SPACE 5
+#define HDLC_ENCODING_BIPHASE_LEVEL 6
+#define HDLC_ENCODING_DIFF_BIPHASE_LEVEL 7
+
+#define HDLC_PREAMBLE_LENGTH_8BITS 0
+#define HDLC_PREAMBLE_LENGTH_16BITS 1
+#define HDLC_PREAMBLE_LENGTH_32BITS 2
+#define HDLC_PREAMBLE_LENGTH_64BITS 3
+
+#define HDLC_PREAMBLE_PATTERN_NONE 0
+#define HDLC_PREAMBLE_PATTERN_ZEROS 1
+#define HDLC_PREAMBLE_PATTERN_FLAGS 2
+#define HDLC_PREAMBLE_PATTERN_10 3
+#define HDLC_PREAMBLE_PATTERN_01 4
+#define HDLC_PREAMBLE_PATTERN_ONES 5
+
+#define MGSL_MODE_ASYNC 1
+#define MGSL_MODE_HDLC 2
+#define MGSL_MODE_MONOSYNC 3
+#define MGSL_MODE_BISYNC 4
+#define MGSL_MODE_RAW 6
+#define MGSL_MODE_BASE_CLOCK 7
+#define MGSL_MODE_XSYNC 8
+
+#define MGSL_BUS_TYPE_ISA 1
+#define MGSL_BUS_TYPE_EISA 2
+#define MGSL_BUS_TYPE_PCI 5
+
+#define MGSL_INTERFACE_MASK 0xf
+#define MGSL_INTERFACE_DISABLE 0
+#define MGSL_INTERFACE_RS232 1
+#define MGSL_INTERFACE_V35 2
+#define MGSL_INTERFACE_RS422 3
+#define MGSL_INTERFACE_RTS_EN 0x10
+#define MGSL_INTERFACE_LL 0x20
+#define MGSL_INTERFACE_RL 0x40
+#define MGSL_INTERFACE_MSB_FIRST 0x80
+
+typedef struct _MGSL_PARAMS
+{
+ /* Common */
+
+ unsigned long mode; /* Asynchronous or HDLC */
+ unsigned char loopback; /* internal loopback mode */
+
+ /* HDLC Only */
+
+ unsigned short flags;
+ unsigned char encoding; /* NRZ, NRZI, etc. */
+ unsigned long clock_speed; /* external clock speed in bits per second */
+ unsigned char addr_filter; /* receive HDLC address filter, 0xFF = disable */
+ unsigned short crc_type; /* None, CRC16-CCITT, or CRC32-CCITT */
+ unsigned char preamble_length;
+ unsigned char preamble;
+
+ /* Async Only */
+
+ unsigned long data_rate; /* bits per second */
+ unsigned char data_bits; /* 7 or 8 data bits */
+ unsigned char stop_bits; /* 1 or 2 stop bits */
+ unsigned char parity; /* none, even, or odd */
+
+} MGSL_PARAMS, *PMGSL_PARAMS;
+
+#define MICROGATE_VENDOR_ID 0x13c0
+#define SYNCLINK_DEVICE_ID 0x0010
+#define MGSCC_DEVICE_ID 0x0020
+#define SYNCLINK_SCA_DEVICE_ID 0x0030
+#define SYNCLINK_GT_DEVICE_ID 0x0070
+#define SYNCLINK_GT4_DEVICE_ID 0x0080
+#define SYNCLINK_AC_DEVICE_ID 0x0090
+#define SYNCLINK_GT2_DEVICE_ID 0x00A0
+#define MGSL_MAX_SERIAL_NUMBER 30
+
+/*
+** device diagnostics status
+*/
+
+#define DiagStatus_OK 0
+#define DiagStatus_AddressFailure 1
+#define DiagStatus_AddressConflict 2
+#define DiagStatus_IrqFailure 3
+#define DiagStatus_IrqConflict 4
+#define DiagStatus_DmaFailure 5
+#define DiagStatus_DmaConflict 6
+#define DiagStatus_PciAdapterNotFound 7
+#define DiagStatus_CantAssignPciResources 8
+#define DiagStatus_CantAssignPciMemAddr 9
+#define DiagStatus_CantAssignPciIoAddr 10
+#define DiagStatus_CantAssignPciIrq 11
+#define DiagStatus_MemoryError 12
+
+#define SerialSignal_DCD 0x01 /* Data Carrier Detect */
+#define SerialSignal_TXD 0x02 /* Transmit Data */
+#define SerialSignal_RI 0x04 /* Ring Indicator */
+#define SerialSignal_RXD 0x08 /* Receive Data */
+#define SerialSignal_CTS 0x10 /* Clear to Send */
+#define SerialSignal_RTS 0x20 /* Request to Send */
+#define SerialSignal_DSR 0x40 /* Data Set Ready */
+#define SerialSignal_DTR 0x80 /* Data Terminal Ready */
+
+
+/*
+ * Counters of the input lines (CTS, DSR, RI, CD) interrupts
+ */
+struct mgsl_icount {
+ __u32 cts, dsr, rng, dcd, tx, rx;
+ __u32 frame, parity, overrun, brk;
+ __u32 buf_overrun;
+ __u32 txok;
+ __u32 txunder;
+ __u32 txabort;
+ __u32 txtimeout;
+ __u32 rxshort;
+ __u32 rxlong;
+ __u32 rxabort;
+ __u32 rxover;
+ __u32 rxcrc;
+ __u32 rxok;
+ __u32 exithunt;
+ __u32 rxidle;
+};
+
+struct gpio_desc {
+ __u32 state;
+ __u32 smask;
+ __u32 dir;
+ __u32 dmask;
+};
+
+#define DEBUG_LEVEL_DATA 1
+#define DEBUG_LEVEL_ERROR 2
+#define DEBUG_LEVEL_INFO 3
+#define DEBUG_LEVEL_BH 4
+#define DEBUG_LEVEL_ISR 5
+
+/*
+** Event bit flags for use with MgslWaitEvent
+*/
+
+#define MgslEvent_DsrActive 0x0001
+#define MgslEvent_DsrInactive 0x0002
+#define MgslEvent_Dsr 0x0003
+#define MgslEvent_CtsActive 0x0004
+#define MgslEvent_CtsInactive 0x0008
+#define MgslEvent_Cts 0x000c
+#define MgslEvent_DcdActive 0x0010
+#define MgslEvent_DcdInactive 0x0020
+#define MgslEvent_Dcd 0x0030
+#define MgslEvent_RiActive 0x0040
+#define MgslEvent_RiInactive 0x0080
+#define MgslEvent_Ri 0x00c0
+#define MgslEvent_ExitHuntMode 0x0100
+#define MgslEvent_IdleReceived 0x0200
+
+/* Private IOCTL codes:
+ *
+ * MGSL_IOCSPARAMS set MGSL_PARAMS structure values
+ * MGSL_IOCGPARAMS get current MGSL_PARAMS structure values
+ * MGSL_IOCSTXIDLE set current transmit idle mode
+ * MGSL_IOCGTXIDLE get current transmit idle mode
+ * MGSL_IOCTXENABLE enable or disable transmitter
+ * MGSL_IOCRXENABLE enable or disable receiver
+ * MGSL_IOCTXABORT abort transmitting frame (HDLC)
+ * MGSL_IOCGSTATS return current statistics
+ * MGSL_IOCWAITEVENT wait for specified event to occur
+ * MGSL_LOOPTXDONE transmit in HDLC LoopMode done
+ * MGSL_IOCSIF set the serial interface type
+ * MGSL_IOCGIF get the serial interface type
+ */
+#define MGSL_MAGIC_IOC 'm'
+#define MGSL_IOCSPARAMS _IOW(MGSL_MAGIC_IOC,0,struct _MGSL_PARAMS)
+#define MGSL_IOCGPARAMS _IOR(MGSL_MAGIC_IOC,1,struct _MGSL_PARAMS)
+#define MGSL_IOCSTXIDLE _IO(MGSL_MAGIC_IOC,2)
+#define MGSL_IOCGTXIDLE _IO(MGSL_MAGIC_IOC,3)
+#define MGSL_IOCTXENABLE _IO(MGSL_MAGIC_IOC,4)
+#define MGSL_IOCRXENABLE _IO(MGSL_MAGIC_IOC,5)
+#define MGSL_IOCTXABORT _IO(MGSL_MAGIC_IOC,6)
+#define MGSL_IOCGSTATS _IO(MGSL_MAGIC_IOC,7)
+#define MGSL_IOCWAITEVENT _IOWR(MGSL_MAGIC_IOC,8,int)
+#define MGSL_IOCCLRMODCOUNT _IO(MGSL_MAGIC_IOC,15)
+#define MGSL_IOCLOOPTXDONE _IO(MGSL_MAGIC_IOC,9)
+#define MGSL_IOCSIF _IO(MGSL_MAGIC_IOC,10)
+#define MGSL_IOCGIF _IO(MGSL_MAGIC_IOC,11)
+#define MGSL_IOCSGPIO _IOW(MGSL_MAGIC_IOC,16,struct gpio_desc)
+#define MGSL_IOCGGPIO _IOR(MGSL_MAGIC_IOC,17,struct gpio_desc)
+#define MGSL_IOCWAITGPIO _IOWR(MGSL_MAGIC_IOC,18,struct gpio_desc)
+#define MGSL_IOCSXSYNC _IO(MGSL_MAGIC_IOC, 19)
+#define MGSL_IOCGXSYNC _IO(MGSL_MAGIC_IOC, 20)
+#define MGSL_IOCSXCTRL _IO(MGSL_MAGIC_IOC, 21)
+#define MGSL_IOCGXCTRL _IO(MGSL_MAGIC_IOC, 22)
+
+
+#endif /* _UAPI_SYNCLINK_H_ */
diff --git a/include/uapi/linux/sysctl.h b/include/uapi/linux/sysctl.h
new file mode 100644
index 0000000..6d67213
--- /dev/null
+++ b/include/uapi/linux/sysctl.h
@@ -0,0 +1,932 @@
+/*
+ * sysctl.h: General linux system control interface
+ *
+ * Begun 24 March 1995, Stephen Tweedie
+ *
+ ****************************************************************
+ ****************************************************************
+ **
+ ** WARNING:
+ ** The values in this file are exported to user space via
+ ** the sysctl() binary interface. Do *NOT* change the
+ ** numbering of any existing values here, and do not change
+ ** any numbers within any one set of values. If you have to
+ ** redefine an existing interface, use a new number for it.
+ ** The kernel will then return -ENOTDIR to any application using
+ ** the old binary interface.
+ **
+ ****************************************************************
+ ****************************************************************
+ */
+
+#ifndef _UAPI_LINUX_SYSCTL_H
+#define _UAPI_LINUX_SYSCTL_H
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/compiler.h>
+
+struct completion;
+
+#define CTL_MAXNAME 10 /* how many path components do we allow in a
+ call to sysctl? In other words, what is
+ the largest acceptable value for the nlen
+ member of a struct __sysctl_args to have? */
+
+struct __sysctl_args {
+ int __user *name;
+ int nlen;
+ void __user *oldval;
+ size_t __user *oldlenp;
+ void __user *newval;
+ size_t newlen;
+ unsigned long __unused[4];
+};
+
+/* Define sysctl names first */
+
+/* Top-level names: */
+
+enum
+{
+ CTL_KERN=1, /* General kernel info and control */
+ CTL_VM=2, /* VM management */
+ CTL_NET=3, /* Networking */
+ CTL_PROC=4, /* removal breaks strace(1) compilation */
+ CTL_FS=5, /* Filesystems */
+ CTL_DEBUG=6, /* Debugging */
+ CTL_DEV=7, /* Devices */
+ CTL_BUS=8, /* Busses */
+ CTL_ABI=9, /* Binary emulation */
+ CTL_CPU=10, /* CPU stuff (speed scaling, etc) */
+ CTL_ARLAN=254, /* arlan wireless driver */
+ CTL_S390DBF=5677, /* s390 debug */
+ CTL_SUNRPC=7249, /* sunrpc debug */
+ CTL_PM=9899, /* frv power management */
+ CTL_FRV=9898, /* frv specific sysctls */
+};
+
+/* CTL_BUS names: */
+enum
+{
+ CTL_BUS_ISA=1 /* ISA */
+};
+
+/* /proc/sys/fs/inotify/ */
+enum
+{
+ INOTIFY_MAX_USER_INSTANCES=1, /* max instances per user */
+ INOTIFY_MAX_USER_WATCHES=2, /* max watches per user */
+ INOTIFY_MAX_QUEUED_EVENTS=3 /* max queued events per instance */
+};
+
+/* CTL_KERN names: */
+enum
+{
+ KERN_OSTYPE=1, /* string: system version */
+ KERN_OSRELEASE=2, /* string: system release */
+ KERN_OSREV=3, /* int: system revision */
+ KERN_VERSION=4, /* string: compile time info */
+ KERN_SECUREMASK=5, /* struct: maximum rights mask */
+ KERN_PROF=6, /* table: profiling information */
+ KERN_NODENAME=7, /* string: hostname */
+ KERN_DOMAINNAME=8, /* string: domainname */
+
+ KERN_PANIC=15, /* int: panic timeout */
+ KERN_REALROOTDEV=16, /* real root device to mount after initrd */
+
+ KERN_SPARC_REBOOT=21, /* reboot command on Sparc */
+ KERN_CTLALTDEL=22, /* int: allow ctl-alt-del to reboot */
+ KERN_PRINTK=23, /* struct: control printk logging parameters */
+ KERN_NAMETRANS=24, /* Name translation */
+ KERN_PPC_HTABRECLAIM=25, /* turn htab reclaimation on/off on PPC */
+ KERN_PPC_ZEROPAGED=26, /* turn idle page zeroing on/off on PPC */
+ KERN_PPC_POWERSAVE_NAP=27, /* use nap mode for power saving */
+ KERN_MODPROBE=28, /* string: modprobe path */
+ KERN_SG_BIG_BUFF=29, /* int: sg driver reserved buffer size */
+ KERN_ACCT=30, /* BSD process accounting parameters */
+ KERN_PPC_L2CR=31, /* l2cr register on PPC */
+
+ KERN_RTSIGNR=32, /* Number of rt sigs queued */
+ KERN_RTSIGMAX=33, /* Max queuable */
+
+ KERN_SHMMAX=34, /* long: Maximum shared memory segment */
+ KERN_MSGMAX=35, /* int: Maximum size of a messege */
+ KERN_MSGMNB=36, /* int: Maximum message queue size */
+ KERN_MSGPOOL=37, /* int: Maximum system message pool size */
+ KERN_SYSRQ=38, /* int: Sysreq enable */
+ KERN_MAX_THREADS=39, /* int: Maximum nr of threads in the system */
+ KERN_RANDOM=40, /* Random driver */
+ KERN_SHMALL=41, /* int: Maximum size of shared memory */
+ KERN_MSGMNI=42, /* int: msg queue identifiers */
+ KERN_SEM=43, /* struct: sysv semaphore limits */
+ KERN_SPARC_STOP_A=44, /* int: Sparc Stop-A enable */
+ KERN_SHMMNI=45, /* int: shm array identifiers */
+ KERN_OVERFLOWUID=46, /* int: overflow UID */
+ KERN_OVERFLOWGID=47, /* int: overflow GID */
+ KERN_SHMPATH=48, /* string: path to shm fs */
+ KERN_HOTPLUG=49, /* string: path to uevent helper (deprecated) */
+ KERN_IEEE_EMULATION_WARNINGS=50, /* int: unimplemented ieee instructions */
+ KERN_S390_USER_DEBUG_LOGGING=51, /* int: dumps of user faults */
+ KERN_CORE_USES_PID=52, /* int: use core or core.%pid */
+ KERN_TAINTED=53, /* int: various kernel tainted flags */
+ KERN_CADPID=54, /* int: PID of the process to notify on CAD */
+ KERN_PIDMAX=55, /* int: PID # limit */
+ KERN_CORE_PATTERN=56, /* string: pattern for core-file names */
+ KERN_PANIC_ON_OOPS=57, /* int: whether we will panic on an oops */
+ KERN_HPPA_PWRSW=58, /* int: hppa soft-power enable */
+ KERN_HPPA_UNALIGNED=59, /* int: hppa unaligned-trap enable */
+ KERN_PRINTK_RATELIMIT=60, /* int: tune printk ratelimiting */
+ KERN_PRINTK_RATELIMIT_BURST=61, /* int: tune printk ratelimiting */
+ KERN_PTY=62, /* dir: pty driver */
+ KERN_NGROUPS_MAX=63, /* int: NGROUPS_MAX */
+ KERN_SPARC_SCONS_PWROFF=64, /* int: serial console power-off halt */
+ KERN_HZ_TIMER=65, /* int: hz timer on or off */
+ KERN_UNKNOWN_NMI_PANIC=66, /* int: unknown nmi panic flag */
+ KERN_BOOTLOADER_TYPE=67, /* int: boot loader type */
+ KERN_RANDOMIZE=68, /* int: randomize virtual address space */
+ KERN_SETUID_DUMPABLE=69, /* int: behaviour of dumps for setuid core */
+ KERN_SPIN_RETRY=70, /* int: number of spinlock retries */
+ KERN_ACPI_VIDEO_FLAGS=71, /* int: flags for setting up video after ACPI sleep */
+ KERN_IA64_UNALIGNED=72, /* int: ia64 unaligned userland trap enable */
+ KERN_COMPAT_LOG=73, /* int: print compat layer messages */
+ KERN_MAX_LOCK_DEPTH=74, /* int: rtmutex's maximum lock depth */
+ KERN_NMI_WATCHDOG=75, /* int: enable/disable nmi watchdog */
+ KERN_PANIC_ON_NMI=76, /* int: whether we will panic on an unrecovered */
+};
+
+
+
+/* CTL_VM names: */
+enum
+{
+ VM_UNUSED1=1, /* was: struct: Set vm swapping control */
+ VM_UNUSED2=2, /* was; int: Linear or sqrt() swapout for hogs */
+ VM_UNUSED3=3, /* was: struct: Set free page thresholds */
+ VM_UNUSED4=4, /* Spare */
+ VM_OVERCOMMIT_MEMORY=5, /* Turn off the virtual memory safety limit */
+ VM_UNUSED5=6, /* was: struct: Set buffer memory thresholds */
+ VM_UNUSED7=7, /* was: struct: Set cache memory thresholds */
+ VM_UNUSED8=8, /* was: struct: Control kswapd behaviour */
+ VM_UNUSED9=9, /* was: struct: Set page table cache parameters */
+ VM_PAGE_CLUSTER=10, /* int: set number of pages to swap together */
+ VM_DIRTY_BACKGROUND=11, /* dirty_background_ratio */
+ VM_DIRTY_RATIO=12, /* dirty_ratio */
+ VM_DIRTY_WB_CS=13, /* dirty_writeback_centisecs */
+ VM_DIRTY_EXPIRE_CS=14, /* dirty_expire_centisecs */
+ VM_NR_PDFLUSH_THREADS=15, /* nr_pdflush_threads */
+ VM_OVERCOMMIT_RATIO=16, /* percent of RAM to allow overcommit in */
+ VM_PAGEBUF=17, /* struct: Control pagebuf parameters */
+ VM_HUGETLB_PAGES=18, /* int: Number of available Huge Pages */
+ VM_SWAPPINESS=19, /* Tendency to steal mapped memory */
+ VM_LOWMEM_RESERVE_RATIO=20,/* reservation ratio for lower memory zones */
+ VM_MIN_FREE_KBYTES=21, /* Minimum free kilobytes to maintain */
+ VM_MAX_MAP_COUNT=22, /* int: Maximum number of mmaps/address-space */
+ VM_LAPTOP_MODE=23, /* vm laptop mode */
+ VM_BLOCK_DUMP=24, /* block dump mode */
+ VM_HUGETLB_GROUP=25, /* permitted hugetlb group */
+ VM_VFS_CACHE_PRESSURE=26, /* dcache/icache reclaim pressure */
+ VM_LEGACY_VA_LAYOUT=27, /* legacy/compatibility virtual address space layout */
+ VM_SWAP_TOKEN_TIMEOUT=28, /* default time for token time out */
+ VM_DROP_PAGECACHE=29, /* int: nuke lots of pagecache */
+ VM_PERCPU_PAGELIST_FRACTION=30,/* int: fraction of pages in each percpu_pagelist */
+ VM_ZONE_RECLAIM_MODE=31, /* reclaim local zone memory before going off node */
+ VM_MIN_UNMAPPED=32, /* Set min percent of unmapped pages */
+ VM_PANIC_ON_OOM=33, /* panic at out-of-memory */
+ VM_VDSO_ENABLED=34, /* map VDSO into new processes? */
+ VM_MIN_SLAB=35, /* Percent pages ignored by zone reclaim */
+};
+
+
+/* CTL_NET names: */
+enum
+{
+ NET_CORE=1,
+ NET_ETHER=2,
+ NET_802=3,
+ NET_UNIX=4,
+ NET_IPV4=5,
+ NET_IPX=6,
+ NET_ATALK=7,
+ NET_NETROM=8,
+ NET_AX25=9,
+ NET_BRIDGE=10,
+ NET_ROSE=11,
+ NET_IPV6=12,
+ NET_X25=13,
+ NET_TR=14,
+ NET_DECNET=15,
+ NET_ECONET=16,
+ NET_SCTP=17,
+ NET_LLC=18,
+ NET_NETFILTER=19,
+ NET_DCCP=20,
+ NET_IRDA=412,
+};
+
+/* /proc/sys/kernel/random */
+enum
+{
+ RANDOM_POOLSIZE=1,
+ RANDOM_ENTROPY_COUNT=2,
+ RANDOM_READ_THRESH=3,
+ RANDOM_WRITE_THRESH=4,
+ RANDOM_BOOT_ID=5,
+ RANDOM_UUID=6
+};
+
+/* /proc/sys/kernel/pty */
+enum
+{
+ PTY_MAX=1,
+ PTY_NR=2
+};
+
+/* /proc/sys/bus/isa */
+enum
+{
+ BUS_ISA_MEM_BASE=1,
+ BUS_ISA_PORT_BASE=2,
+ BUS_ISA_PORT_SHIFT=3
+};
+
+/* /proc/sys/net/core */
+enum
+{
+ NET_CORE_WMEM_MAX=1,
+ NET_CORE_RMEM_MAX=2,
+ NET_CORE_WMEM_DEFAULT=3,
+ NET_CORE_RMEM_DEFAULT=4,
+/* was NET_CORE_DESTROY_DELAY */
+ NET_CORE_MAX_BACKLOG=6,
+ NET_CORE_FASTROUTE=7,
+ NET_CORE_MSG_COST=8,
+ NET_CORE_MSG_BURST=9,
+ NET_CORE_OPTMEM_MAX=10,
+ NET_CORE_HOT_LIST_LENGTH=11,
+ NET_CORE_DIVERT_VERSION=12,
+ NET_CORE_NO_CONG_THRESH=13,
+ NET_CORE_NO_CONG=14,
+ NET_CORE_LO_CONG=15,
+ NET_CORE_MOD_CONG=16,
+ NET_CORE_DEV_WEIGHT=17,
+ NET_CORE_SOMAXCONN=18,
+ NET_CORE_BUDGET=19,
+ NET_CORE_AEVENT_ETIME=20,
+ NET_CORE_AEVENT_RSEQTH=21,
+ NET_CORE_WARNINGS=22,
+};
+
+/* /proc/sys/net/ethernet */
+
+/* /proc/sys/net/802 */
+
+/* /proc/sys/net/unix */
+
+enum
+{
+ NET_UNIX_DESTROY_DELAY=1,
+ NET_UNIX_DELETE_DELAY=2,
+ NET_UNIX_MAX_DGRAM_QLEN=3,
+};
+
+/* /proc/sys/net/netfilter */
+enum
+{
+ NET_NF_CONNTRACK_MAX=1,
+ NET_NF_CONNTRACK_TCP_TIMEOUT_SYN_SENT=2,
+ NET_NF_CONNTRACK_TCP_TIMEOUT_SYN_RECV=3,
+ NET_NF_CONNTRACK_TCP_TIMEOUT_ESTABLISHED=4,
+ NET_NF_CONNTRACK_TCP_TIMEOUT_FIN_WAIT=5,
+ NET_NF_CONNTRACK_TCP_TIMEOUT_CLOSE_WAIT=6,
+ NET_NF_CONNTRACK_TCP_TIMEOUT_LAST_ACK=7,
+ NET_NF_CONNTRACK_TCP_TIMEOUT_TIME_WAIT=8,
+ NET_NF_CONNTRACK_TCP_TIMEOUT_CLOSE=9,
+ NET_NF_CONNTRACK_UDP_TIMEOUT=10,
+ NET_NF_CONNTRACK_UDP_TIMEOUT_STREAM=11,
+ NET_NF_CONNTRACK_ICMP_TIMEOUT=12,
+ NET_NF_CONNTRACK_GENERIC_TIMEOUT=13,
+ NET_NF_CONNTRACK_BUCKETS=14,
+ NET_NF_CONNTRACK_LOG_INVALID=15,
+ NET_NF_CONNTRACK_TCP_TIMEOUT_MAX_RETRANS=16,
+ NET_NF_CONNTRACK_TCP_LOOSE=17,
+ NET_NF_CONNTRACK_TCP_BE_LIBERAL=18,
+ NET_NF_CONNTRACK_TCP_MAX_RETRANS=19,
+ NET_NF_CONNTRACK_SCTP_TIMEOUT_CLOSED=20,
+ NET_NF_CONNTRACK_SCTP_TIMEOUT_COOKIE_WAIT=21,
+ NET_NF_CONNTRACK_SCTP_TIMEOUT_COOKIE_ECHOED=22,
+ NET_NF_CONNTRACK_SCTP_TIMEOUT_ESTABLISHED=23,
+ NET_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_SENT=24,
+ NET_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_RECD=25,
+ NET_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_ACK_SENT=26,
+ NET_NF_CONNTRACK_COUNT=27,
+ NET_NF_CONNTRACK_ICMPV6_TIMEOUT=28,
+ NET_NF_CONNTRACK_FRAG6_TIMEOUT=29,
+ NET_NF_CONNTRACK_FRAG6_LOW_THRESH=30,
+ NET_NF_CONNTRACK_FRAG6_HIGH_THRESH=31,
+ NET_NF_CONNTRACK_CHECKSUM=32,
+};
+
+/* /proc/sys/net/ipv4 */
+enum
+{
+ /* v2.0 compatibile variables */
+ NET_IPV4_FORWARD=8,
+ NET_IPV4_DYNADDR=9,
+
+ NET_IPV4_CONF=16,
+ NET_IPV4_NEIGH=17,
+ NET_IPV4_ROUTE=18,
+ NET_IPV4_FIB_HASH=19,
+ NET_IPV4_NETFILTER=20,
+
+ NET_IPV4_TCP_TIMESTAMPS=33,
+ NET_IPV4_TCP_WINDOW_SCALING=34,
+ NET_IPV4_TCP_SACK=35,
+ NET_IPV4_TCP_RETRANS_COLLAPSE=36,
+ NET_IPV4_DEFAULT_TTL=37,
+ NET_IPV4_AUTOCONFIG=38,
+ NET_IPV4_NO_PMTU_DISC=39,
+ NET_IPV4_TCP_SYN_RETRIES=40,
+ NET_IPV4_IPFRAG_HIGH_THRESH=41,
+ NET_IPV4_IPFRAG_LOW_THRESH=42,
+ NET_IPV4_IPFRAG_TIME=43,
+ NET_IPV4_TCP_MAX_KA_PROBES=44,
+ NET_IPV4_TCP_KEEPALIVE_TIME=45,
+ NET_IPV4_TCP_KEEPALIVE_PROBES=46,
+ NET_IPV4_TCP_RETRIES1=47,
+ NET_IPV4_TCP_RETRIES2=48,
+ NET_IPV4_TCP_FIN_TIMEOUT=49,
+ NET_IPV4_IP_MASQ_DEBUG=50,
+ NET_TCP_SYNCOOKIES=51,
+ NET_TCP_STDURG=52,
+ NET_TCP_RFC1337=53,
+ NET_TCP_SYN_TAILDROP=54,
+ NET_TCP_MAX_SYN_BACKLOG=55,
+ NET_IPV4_LOCAL_PORT_RANGE=56,
+ NET_IPV4_ICMP_ECHO_IGNORE_ALL=57,
+ NET_IPV4_ICMP_ECHO_IGNORE_BROADCASTS=58,
+ NET_IPV4_ICMP_SOURCEQUENCH_RATE=59,
+ NET_IPV4_ICMP_DESTUNREACH_RATE=60,
+ NET_IPV4_ICMP_TIMEEXCEED_RATE=61,
+ NET_IPV4_ICMP_PARAMPROB_RATE=62,
+ NET_IPV4_ICMP_ECHOREPLY_RATE=63,
+ NET_IPV4_ICMP_IGNORE_BOGUS_ERROR_RESPONSES=64,
+ NET_IPV4_IGMP_MAX_MEMBERSHIPS=65,
+ NET_TCP_TW_RECYCLE=66,
+ NET_IPV4_ALWAYS_DEFRAG=67,
+ NET_IPV4_TCP_KEEPALIVE_INTVL=68,
+ NET_IPV4_INET_PEER_THRESHOLD=69,
+ NET_IPV4_INET_PEER_MINTTL=70,
+ NET_IPV4_INET_PEER_MAXTTL=71,
+ NET_IPV4_INET_PEER_GC_MINTIME=72,
+ NET_IPV4_INET_PEER_GC_MAXTIME=73,
+ NET_TCP_ORPHAN_RETRIES=74,
+ NET_TCP_ABORT_ON_OVERFLOW=75,
+ NET_TCP_SYNACK_RETRIES=76,
+ NET_TCP_MAX_ORPHANS=77,
+ NET_TCP_MAX_TW_BUCKETS=78,
+ NET_TCP_FACK=79,
+ NET_TCP_REORDERING=80,
+ NET_TCP_ECN=81,
+ NET_TCP_DSACK=82,
+ NET_TCP_MEM=83,
+ NET_TCP_WMEM=84,
+ NET_TCP_RMEM=85,
+ NET_TCP_APP_WIN=86,
+ NET_TCP_ADV_WIN_SCALE=87,
+ NET_IPV4_NONLOCAL_BIND=88,
+ NET_IPV4_ICMP_RATELIMIT=89,
+ NET_IPV4_ICMP_RATEMASK=90,
+ NET_TCP_TW_REUSE=91,
+ NET_TCP_FRTO=92,
+ NET_TCP_LOW_LATENCY=93,
+ NET_IPV4_IPFRAG_SECRET_INTERVAL=94,
+ NET_IPV4_IGMP_MAX_MSF=96,
+ NET_TCP_NO_METRICS_SAVE=97,
+ NET_TCP_DEFAULT_WIN_SCALE=105,
+ NET_TCP_MODERATE_RCVBUF=106,
+ NET_TCP_TSO_WIN_DIVISOR=107,
+ NET_TCP_BIC_BETA=108,
+ NET_IPV4_ICMP_ERRORS_USE_INBOUND_IFADDR=109,
+ NET_TCP_CONG_CONTROL=110,
+ NET_TCP_ABC=111,
+ NET_IPV4_IPFRAG_MAX_DIST=112,
+ NET_TCP_MTU_PROBING=113,
+ NET_TCP_BASE_MSS=114,
+ NET_IPV4_TCP_WORKAROUND_SIGNED_WINDOWS=115,
+ NET_TCP_DMA_COPYBREAK=116,
+ NET_TCP_SLOW_START_AFTER_IDLE=117,
+ NET_CIPSOV4_CACHE_ENABLE=118,
+ NET_CIPSOV4_CACHE_BUCKET_SIZE=119,
+ NET_CIPSOV4_RBM_OPTFMT=120,
+ NET_CIPSOV4_RBM_STRICTVALID=121,
+ NET_TCP_AVAIL_CONG_CONTROL=122,
+ NET_TCP_ALLOWED_CONG_CONTROL=123,
+ NET_TCP_MAX_SSTHRESH=124,
+ NET_TCP_FRTO_RESPONSE=125,
+};
+
+enum {
+ NET_IPV4_ROUTE_FLUSH=1,
+ NET_IPV4_ROUTE_MIN_DELAY=2, /* obsolete since 2.6.25 */
+ NET_IPV4_ROUTE_MAX_DELAY=3, /* obsolete since 2.6.25 */
+ NET_IPV4_ROUTE_GC_THRESH=4,
+ NET_IPV4_ROUTE_MAX_SIZE=5,
+ NET_IPV4_ROUTE_GC_MIN_INTERVAL=6,
+ NET_IPV4_ROUTE_GC_TIMEOUT=7,
+ NET_IPV4_ROUTE_GC_INTERVAL=8, /* obsolete since 2.6.38 */
+ NET_IPV4_ROUTE_REDIRECT_LOAD=9,
+ NET_IPV4_ROUTE_REDIRECT_NUMBER=10,
+ NET_IPV4_ROUTE_REDIRECT_SILENCE=11,
+ NET_IPV4_ROUTE_ERROR_COST=12,
+ NET_IPV4_ROUTE_ERROR_BURST=13,
+ NET_IPV4_ROUTE_GC_ELASTICITY=14,
+ NET_IPV4_ROUTE_MTU_EXPIRES=15,
+ NET_IPV4_ROUTE_MIN_PMTU=16,
+ NET_IPV4_ROUTE_MIN_ADVMSS=17,
+ NET_IPV4_ROUTE_SECRET_INTERVAL=18,
+ NET_IPV4_ROUTE_GC_MIN_INTERVAL_MS=19,
+};
+
+enum
+{
+ NET_PROTO_CONF_ALL=-2,
+ NET_PROTO_CONF_DEFAULT=-3
+
+ /* And device ifindices ... */
+};
+
+enum
+{
+ NET_IPV4_CONF_FORWARDING=1,
+ NET_IPV4_CONF_MC_FORWARDING=2,
+ NET_IPV4_CONF_PROXY_ARP=3,
+ NET_IPV4_CONF_ACCEPT_REDIRECTS=4,
+ NET_IPV4_CONF_SECURE_REDIRECTS=5,
+ NET_IPV4_CONF_SEND_REDIRECTS=6,
+ NET_IPV4_CONF_SHARED_MEDIA=7,
+ NET_IPV4_CONF_RP_FILTER=8,
+ NET_IPV4_CONF_ACCEPT_SOURCE_ROUTE=9,
+ NET_IPV4_CONF_BOOTP_RELAY=10,
+ NET_IPV4_CONF_LOG_MARTIANS=11,
+ NET_IPV4_CONF_TAG=12,
+ NET_IPV4_CONF_ARPFILTER=13,
+ NET_IPV4_CONF_MEDIUM_ID=14,
+ NET_IPV4_CONF_NOXFRM=15,
+ NET_IPV4_CONF_NOPOLICY=16,
+ NET_IPV4_CONF_FORCE_IGMP_VERSION=17,
+ NET_IPV4_CONF_ARP_ANNOUNCE=18,
+ NET_IPV4_CONF_ARP_IGNORE=19,
+ NET_IPV4_CONF_PROMOTE_SECONDARIES=20,
+ NET_IPV4_CONF_ARP_ACCEPT=21,
+ NET_IPV4_CONF_ARP_NOTIFY=22,
+};
+
+/* /proc/sys/net/ipv4/netfilter */
+enum
+{
+ NET_IPV4_NF_CONNTRACK_MAX=1,
+ NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_SYN_SENT=2,
+ NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_SYN_RECV=3,
+ NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_ESTABLISHED=4,
+ NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_FIN_WAIT=5,
+ NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_CLOSE_WAIT=6,
+ NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_LAST_ACK=7,
+ NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_TIME_WAIT=8,
+ NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_CLOSE=9,
+ NET_IPV4_NF_CONNTRACK_UDP_TIMEOUT=10,
+ NET_IPV4_NF_CONNTRACK_UDP_TIMEOUT_STREAM=11,
+ NET_IPV4_NF_CONNTRACK_ICMP_TIMEOUT=12,
+ NET_IPV4_NF_CONNTRACK_GENERIC_TIMEOUT=13,
+ NET_IPV4_NF_CONNTRACK_BUCKETS=14,
+ NET_IPV4_NF_CONNTRACK_LOG_INVALID=15,
+ NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_MAX_RETRANS=16,
+ NET_IPV4_NF_CONNTRACK_TCP_LOOSE=17,
+ NET_IPV4_NF_CONNTRACK_TCP_BE_LIBERAL=18,
+ NET_IPV4_NF_CONNTRACK_TCP_MAX_RETRANS=19,
+ NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_CLOSED=20,
+ NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_COOKIE_WAIT=21,
+ NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_COOKIE_ECHOED=22,
+ NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_ESTABLISHED=23,
+ NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_SENT=24,
+ NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_RECD=25,
+ NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_ACK_SENT=26,
+ NET_IPV4_NF_CONNTRACK_COUNT=27,
+ NET_IPV4_NF_CONNTRACK_CHECKSUM=28,
+};
+
+/* /proc/sys/net/ipv6 */
+enum {
+ NET_IPV6_CONF=16,
+ NET_IPV6_NEIGH=17,
+ NET_IPV6_ROUTE=18,
+ NET_IPV6_ICMP=19,
+ NET_IPV6_BINDV6ONLY=20,
+ NET_IPV6_IP6FRAG_HIGH_THRESH=21,
+ NET_IPV6_IP6FRAG_LOW_THRESH=22,
+ NET_IPV6_IP6FRAG_TIME=23,
+ NET_IPV6_IP6FRAG_SECRET_INTERVAL=24,
+ NET_IPV6_MLD_MAX_MSF=25,
+};
+
+enum {
+ NET_IPV6_ROUTE_FLUSH=1,
+ NET_IPV6_ROUTE_GC_THRESH=2,
+ NET_IPV6_ROUTE_MAX_SIZE=3,
+ NET_IPV6_ROUTE_GC_MIN_INTERVAL=4,
+ NET_IPV6_ROUTE_GC_TIMEOUT=5,
+ NET_IPV6_ROUTE_GC_INTERVAL=6,
+ NET_IPV6_ROUTE_GC_ELASTICITY=7,
+ NET_IPV6_ROUTE_MTU_EXPIRES=8,
+ NET_IPV6_ROUTE_MIN_ADVMSS=9,
+ NET_IPV6_ROUTE_GC_MIN_INTERVAL_MS=10
+};
+
+enum {
+ NET_IPV6_FORWARDING=1,
+ NET_IPV6_HOP_LIMIT=2,
+ NET_IPV6_MTU=3,
+ NET_IPV6_ACCEPT_RA=4,
+ NET_IPV6_ACCEPT_REDIRECTS=5,
+ NET_IPV6_AUTOCONF=6,
+ NET_IPV6_DAD_TRANSMITS=7,
+ NET_IPV6_RTR_SOLICITS=8,
+ NET_IPV6_RTR_SOLICIT_INTERVAL=9,
+ NET_IPV6_RTR_SOLICIT_DELAY=10,
+ NET_IPV6_USE_TEMPADDR=11,
+ NET_IPV6_TEMP_VALID_LFT=12,
+ NET_IPV6_TEMP_PREFERED_LFT=13,
+ NET_IPV6_REGEN_MAX_RETRY=14,
+ NET_IPV6_MAX_DESYNC_FACTOR=15,
+ NET_IPV6_MAX_ADDRESSES=16,
+ NET_IPV6_FORCE_MLD_VERSION=17,
+ NET_IPV6_ACCEPT_RA_DEFRTR=18,
+ NET_IPV6_ACCEPT_RA_PINFO=19,
+ NET_IPV6_ACCEPT_RA_RTR_PREF=20,
+ NET_IPV6_RTR_PROBE_INTERVAL=21,
+ NET_IPV6_ACCEPT_RA_RT_INFO_MAX_PLEN=22,
+ NET_IPV6_PROXY_NDP=23,
+ NET_IPV6_ACCEPT_SOURCE_ROUTE=25,
+ __NET_IPV6_MAX
+};
+
+/* /proc/sys/net/ipv6/icmp */
+enum {
+ NET_IPV6_ICMP_RATELIMIT=1
+};
+
+/* /proc/sys/net/<protocol>/neigh/<dev> */
+enum {
+ NET_NEIGH_MCAST_SOLICIT=1,
+ NET_NEIGH_UCAST_SOLICIT=2,
+ NET_NEIGH_APP_SOLICIT=3,
+ NET_NEIGH_RETRANS_TIME=4,
+ NET_NEIGH_REACHABLE_TIME=5,
+ NET_NEIGH_DELAY_PROBE_TIME=6,
+ NET_NEIGH_GC_STALE_TIME=7,
+ NET_NEIGH_UNRES_QLEN=8,
+ NET_NEIGH_PROXY_QLEN=9,
+ NET_NEIGH_ANYCAST_DELAY=10,
+ NET_NEIGH_PROXY_DELAY=11,
+ NET_NEIGH_LOCKTIME=12,
+ NET_NEIGH_GC_INTERVAL=13,
+ NET_NEIGH_GC_THRESH1=14,
+ NET_NEIGH_GC_THRESH2=15,
+ NET_NEIGH_GC_THRESH3=16,
+ NET_NEIGH_RETRANS_TIME_MS=17,
+ NET_NEIGH_REACHABLE_TIME_MS=18,
+};
+
+/* /proc/sys/net/dccp */
+enum {
+ NET_DCCP_DEFAULT=1,
+};
+
+/* /proc/sys/net/ipx */
+enum {
+ NET_IPX_PPROP_BROADCASTING=1,
+ NET_IPX_FORWARDING=2
+};
+
+/* /proc/sys/net/llc */
+enum {
+ NET_LLC2=1,
+ NET_LLC_STATION=2,
+};
+
+/* /proc/sys/net/llc/llc2 */
+enum {
+ NET_LLC2_TIMEOUT=1,
+};
+
+/* /proc/sys/net/llc/station */
+enum {
+ NET_LLC_STATION_ACK_TIMEOUT=1,
+};
+
+/* /proc/sys/net/llc/llc2/timeout */
+enum {
+ NET_LLC2_ACK_TIMEOUT=1,
+ NET_LLC2_P_TIMEOUT=2,
+ NET_LLC2_REJ_TIMEOUT=3,
+ NET_LLC2_BUSY_TIMEOUT=4,
+};
+
+/* /proc/sys/net/appletalk */
+enum {
+ NET_ATALK_AARP_EXPIRY_TIME=1,
+ NET_ATALK_AARP_TICK_TIME=2,
+ NET_ATALK_AARP_RETRANSMIT_LIMIT=3,
+ NET_ATALK_AARP_RESOLVE_TIME=4
+};
+
+
+/* /proc/sys/net/netrom */
+enum {
+ NET_NETROM_DEFAULT_PATH_QUALITY=1,
+ NET_NETROM_OBSOLESCENCE_COUNT_INITIALISER=2,
+ NET_NETROM_NETWORK_TTL_INITIALISER=3,
+ NET_NETROM_TRANSPORT_TIMEOUT=4,
+ NET_NETROM_TRANSPORT_MAXIMUM_TRIES=5,
+ NET_NETROM_TRANSPORT_ACKNOWLEDGE_DELAY=6,
+ NET_NETROM_TRANSPORT_BUSY_DELAY=7,
+ NET_NETROM_TRANSPORT_REQUESTED_WINDOW_SIZE=8,
+ NET_NETROM_TRANSPORT_NO_ACTIVITY_TIMEOUT=9,
+ NET_NETROM_ROUTING_CONTROL=10,
+ NET_NETROM_LINK_FAILS_COUNT=11,
+ NET_NETROM_RESET=12
+};
+
+/* /proc/sys/net/ax25 */
+enum {
+ NET_AX25_IP_DEFAULT_MODE=1,
+ NET_AX25_DEFAULT_MODE=2,
+ NET_AX25_BACKOFF_TYPE=3,
+ NET_AX25_CONNECT_MODE=4,
+ NET_AX25_STANDARD_WINDOW=5,
+ NET_AX25_EXTENDED_WINDOW=6,
+ NET_AX25_T1_TIMEOUT=7,
+ NET_AX25_T2_TIMEOUT=8,
+ NET_AX25_T3_TIMEOUT=9,
+ NET_AX25_IDLE_TIMEOUT=10,
+ NET_AX25_N2=11,
+ NET_AX25_PACLEN=12,
+ NET_AX25_PROTOCOL=13,
+ NET_AX25_DAMA_SLAVE_TIMEOUT=14
+};
+
+/* /proc/sys/net/rose */
+enum {
+ NET_ROSE_RESTART_REQUEST_TIMEOUT=1,
+ NET_ROSE_CALL_REQUEST_TIMEOUT=2,
+ NET_ROSE_RESET_REQUEST_TIMEOUT=3,
+ NET_ROSE_CLEAR_REQUEST_TIMEOUT=4,
+ NET_ROSE_ACK_HOLD_BACK_TIMEOUT=5,
+ NET_ROSE_ROUTING_CONTROL=6,
+ NET_ROSE_LINK_FAIL_TIMEOUT=7,
+ NET_ROSE_MAX_VCS=8,
+ NET_ROSE_WINDOW_SIZE=9,
+ NET_ROSE_NO_ACTIVITY_TIMEOUT=10
+};
+
+/* /proc/sys/net/x25 */
+enum {
+ NET_X25_RESTART_REQUEST_TIMEOUT=1,
+ NET_X25_CALL_REQUEST_TIMEOUT=2,
+ NET_X25_RESET_REQUEST_TIMEOUT=3,
+ NET_X25_CLEAR_REQUEST_TIMEOUT=4,
+ NET_X25_ACK_HOLD_BACK_TIMEOUT=5,
+ NET_X25_FORWARD=6
+};
+
+/* /proc/sys/net/token-ring */
+enum
+{
+ NET_TR_RIF_TIMEOUT=1
+};
+
+/* /proc/sys/net/decnet/ */
+enum {
+ NET_DECNET_NODE_TYPE = 1,
+ NET_DECNET_NODE_ADDRESS = 2,
+ NET_DECNET_NODE_NAME = 3,
+ NET_DECNET_DEFAULT_DEVICE = 4,
+ NET_DECNET_TIME_WAIT = 5,
+ NET_DECNET_DN_COUNT = 6,
+ NET_DECNET_DI_COUNT = 7,
+ NET_DECNET_DR_COUNT = 8,
+ NET_DECNET_DST_GC_INTERVAL = 9,
+ NET_DECNET_CONF = 10,
+ NET_DECNET_NO_FC_MAX_CWND = 11,
+ NET_DECNET_MEM = 12,
+ NET_DECNET_RMEM = 13,
+ NET_DECNET_WMEM = 14,
+ NET_DECNET_DEBUG_LEVEL = 255
+};
+
+/* /proc/sys/net/decnet/conf/<dev> */
+enum {
+ NET_DECNET_CONF_LOOPBACK = -2,
+ NET_DECNET_CONF_DDCMP = -3,
+ NET_DECNET_CONF_PPP = -4,
+ NET_DECNET_CONF_X25 = -5,
+ NET_DECNET_CONF_GRE = -6,
+ NET_DECNET_CONF_ETHER = -7
+
+ /* ... and ifindex of devices */
+};
+
+/* /proc/sys/net/decnet/conf/<dev>/ */
+enum {
+ NET_DECNET_CONF_DEV_PRIORITY = 1,
+ NET_DECNET_CONF_DEV_T1 = 2,
+ NET_DECNET_CONF_DEV_T2 = 3,
+ NET_DECNET_CONF_DEV_T3 = 4,
+ NET_DECNET_CONF_DEV_FORWARDING = 5,
+ NET_DECNET_CONF_DEV_BLKSIZE = 6,
+ NET_DECNET_CONF_DEV_STATE = 7
+};
+
+/* /proc/sys/net/sctp */
+enum {
+ NET_SCTP_RTO_INITIAL = 1,
+ NET_SCTP_RTO_MIN = 2,
+ NET_SCTP_RTO_MAX = 3,
+ NET_SCTP_RTO_ALPHA = 4,
+ NET_SCTP_RTO_BETA = 5,
+ NET_SCTP_VALID_COOKIE_LIFE = 6,
+ NET_SCTP_ASSOCIATION_MAX_RETRANS = 7,
+ NET_SCTP_PATH_MAX_RETRANS = 8,
+ NET_SCTP_MAX_INIT_RETRANSMITS = 9,
+ NET_SCTP_HB_INTERVAL = 10,
+ NET_SCTP_PRESERVE_ENABLE = 11,
+ NET_SCTP_MAX_BURST = 12,
+ NET_SCTP_ADDIP_ENABLE = 13,
+ NET_SCTP_PRSCTP_ENABLE = 14,
+ NET_SCTP_SNDBUF_POLICY = 15,
+ NET_SCTP_SACK_TIMEOUT = 16,
+ NET_SCTP_RCVBUF_POLICY = 17,
+};
+
+/* /proc/sys/net/bridge */
+enum {
+ NET_BRIDGE_NF_CALL_ARPTABLES = 1,
+ NET_BRIDGE_NF_CALL_IPTABLES = 2,
+ NET_BRIDGE_NF_CALL_IP6TABLES = 3,
+ NET_BRIDGE_NF_FILTER_VLAN_TAGGED = 4,
+ NET_BRIDGE_NF_FILTER_PPPOE_TAGGED = 5,
+};
+
+/* proc/sys/net/irda */
+enum {
+ NET_IRDA_DISCOVERY=1,
+ NET_IRDA_DEVNAME=2,
+ NET_IRDA_DEBUG=3,
+ NET_IRDA_FAST_POLL=4,
+ NET_IRDA_DISCOVERY_SLOTS=5,
+ NET_IRDA_DISCOVERY_TIMEOUT=6,
+ NET_IRDA_SLOT_TIMEOUT=7,
+ NET_IRDA_MAX_BAUD_RATE=8,
+ NET_IRDA_MIN_TX_TURN_TIME=9,
+ NET_IRDA_MAX_TX_DATA_SIZE=10,
+ NET_IRDA_MAX_TX_WINDOW=11,
+ NET_IRDA_MAX_NOREPLY_TIME=12,
+ NET_IRDA_WARN_NOREPLY_TIME=13,
+ NET_IRDA_LAP_KEEPALIVE_TIME=14,
+};
+
+
+/* CTL_FS names: */
+enum
+{
+ FS_NRINODE=1, /* int:current number of allocated inodes */
+ FS_STATINODE=2,
+ FS_MAXINODE=3, /* int:maximum number of inodes that can be allocated */
+ FS_NRDQUOT=4, /* int:current number of allocated dquots */
+ FS_MAXDQUOT=5, /* int:maximum number of dquots that can be allocated */
+ FS_NRFILE=6, /* int:current number of allocated filedescriptors */
+ FS_MAXFILE=7, /* int:maximum number of filedescriptors that can be allocated */
+ FS_DENTRY=8,
+ FS_NRSUPER=9, /* int:current number of allocated super_blocks */
+ FS_MAXSUPER=10, /* int:maximum number of super_blocks that can be allocated */
+ FS_OVERFLOWUID=11, /* int: overflow UID */
+ FS_OVERFLOWGID=12, /* int: overflow GID */
+ FS_LEASES=13, /* int: leases enabled */
+ FS_DIR_NOTIFY=14, /* int: directory notification enabled */
+ FS_LEASE_TIME=15, /* int: maximum time to wait for a lease break */
+ FS_DQSTATS=16, /* disc quota usage statistics and control */
+ FS_XFS=17, /* struct: control xfs parameters */
+ FS_AIO_NR=18, /* current system-wide number of aio requests */
+ FS_AIO_MAX_NR=19, /* system-wide maximum number of aio requests */
+ FS_INOTIFY=20, /* inotify submenu */
+ FS_OCFS2=988, /* ocfs2 */
+};
+
+/* /proc/sys/fs/quota/ */
+enum {
+ FS_DQ_LOOKUPS = 1,
+ FS_DQ_DROPS = 2,
+ FS_DQ_READS = 3,
+ FS_DQ_WRITES = 4,
+ FS_DQ_CACHE_HITS = 5,
+ FS_DQ_ALLOCATED = 6,
+ FS_DQ_FREE = 7,
+ FS_DQ_SYNCS = 8,
+ FS_DQ_WARNINGS = 9,
+};
+
+/* CTL_DEBUG names: */
+
+/* CTL_DEV names: */
+enum {
+ DEV_CDROM=1,
+ DEV_HWMON=2,
+ DEV_PARPORT=3,
+ DEV_RAID=4,
+ DEV_MAC_HID=5,
+ DEV_SCSI=6,
+ DEV_IPMI=7,
+};
+
+/* /proc/sys/dev/cdrom */
+enum {
+ DEV_CDROM_INFO=1,
+ DEV_CDROM_AUTOCLOSE=2,
+ DEV_CDROM_AUTOEJECT=3,
+ DEV_CDROM_DEBUG=4,
+ DEV_CDROM_LOCK=5,
+ DEV_CDROM_CHECK_MEDIA=6
+};
+
+/* /proc/sys/dev/parport */
+enum {
+ DEV_PARPORT_DEFAULT=-3
+};
+
+/* /proc/sys/dev/raid */
+enum {
+ DEV_RAID_SPEED_LIMIT_MIN=1,
+ DEV_RAID_SPEED_LIMIT_MAX=2
+};
+
+/* /proc/sys/dev/parport/default */
+enum {
+ DEV_PARPORT_DEFAULT_TIMESLICE=1,
+ DEV_PARPORT_DEFAULT_SPINTIME=2
+};
+
+/* /proc/sys/dev/parport/parport n */
+enum {
+ DEV_PARPORT_SPINTIME=1,
+ DEV_PARPORT_BASE_ADDR=2,
+ DEV_PARPORT_IRQ=3,
+ DEV_PARPORT_DMA=4,
+ DEV_PARPORT_MODES=5,
+ DEV_PARPORT_DEVICES=6,
+ DEV_PARPORT_AUTOPROBE=16
+};
+
+/* /proc/sys/dev/parport/parport n/devices/ */
+enum {
+ DEV_PARPORT_DEVICES_ACTIVE=-3,
+};
+
+/* /proc/sys/dev/parport/parport n/devices/device n */
+enum {
+ DEV_PARPORT_DEVICE_TIMESLICE=1,
+};
+
+/* /proc/sys/dev/mac_hid */
+enum {
+ DEV_MAC_HID_KEYBOARD_SENDS_LINUX_KEYCODES=1,
+ DEV_MAC_HID_KEYBOARD_LOCK_KEYCODES=2,
+ DEV_MAC_HID_MOUSE_BUTTON_EMULATION=3,
+ DEV_MAC_HID_MOUSE_BUTTON2_KEYCODE=4,
+ DEV_MAC_HID_MOUSE_BUTTON3_KEYCODE=5,
+ DEV_MAC_HID_ADB_MOUSE_SENDS_KEYCODES=6
+};
+
+/* /proc/sys/dev/scsi */
+enum {
+ DEV_SCSI_LOGGING_LEVEL=1,
+};
+
+/* /proc/sys/dev/ipmi */
+enum {
+ DEV_IPMI_POWEROFF_POWERCYCLE=1,
+};
+
+/* /proc/sys/abi */
+enum
+{
+ ABI_DEFHANDLER_COFF=1, /* default handler for coff binaries */
+ ABI_DEFHANDLER_ELF=2, /* default handler for ELF binaries */
+ ABI_DEFHANDLER_LCALL7=3,/* default handler for procs using lcall7 */
+ ABI_DEFHANDLER_LIBCSO=4,/* default handler for an libc.so ELF interp */
+ ABI_TRACE=5, /* tracing flags */
+ ABI_FAKE_UTSNAME=6, /* fake target utsname information */
+};
+
+
+#endif /* _UAPI_LINUX_SYSCTL_H */
diff --git a/include/linux/sysinfo.h b/include/uapi/linux/sysinfo.h
similarity index 100%
rename from include/linux/sysinfo.h
rename to include/uapi/linux/sysinfo.h
diff --git a/include/linux/taskstats.h b/include/uapi/linux/taskstats.h
similarity index 100%
rename from include/linux/taskstats.h
rename to include/uapi/linux/taskstats.h
diff --git a/include/uapi/linux/tcp.h b/include/uapi/linux/tcp.h
new file mode 100644
index 0000000..c4b89a5
--- /dev/null
+++ b/include/uapi/linux/tcp.h
@@ -0,0 +1,225 @@
+/*
+ * INET An implementation of the TCP/IP protocol suite for the LINUX
+ * operating system. INET is implemented using the BSD Socket
+ * interface as the means of communication with the user level.
+ *
+ * Definitions for the TCP protocol.
+ *
+ * Version: @(#)tcp.h 1.0.2 04/28/93
+ *
+ * Author: Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _UAPI_LINUX_TCP_H
+#define _UAPI_LINUX_TCP_H
+
+#include <linux/types.h>
+#include <asm/byteorder.h>
+#include <linux/socket.h>
+
+struct tcphdr {
+ __be16 source;
+ __be16 dest;
+ __be32 seq;
+ __be32 ack_seq;
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+ __u16 res1:4,
+ doff:4,
+ fin:1,
+ syn:1,
+ rst:1,
+ psh:1,
+ ack:1,
+ urg:1,
+ ece:1,
+ cwr:1;
+#elif defined(__BIG_ENDIAN_BITFIELD)
+ __u16 doff:4,
+ res1:4,
+ cwr:1,
+ ece:1,
+ urg:1,
+ ack:1,
+ psh:1,
+ rst:1,
+ syn:1,
+ fin:1;
+#else
+#error "Adjust your <asm/byteorder.h> defines"
+#endif
+ __be16 window;
+ __sum16 check;
+ __be16 urg_ptr;
+};
+
+/*
+ * The union cast uses a gcc extension to avoid aliasing problems
+ * (union is compatible to any of its members)
+ * This means this part of the code is -fstrict-aliasing safe now.
+ */
+union tcp_word_hdr {
+ struct tcphdr hdr;
+ __be32 words[5];
+};
+
+#define tcp_flag_word(tp) ( ((union tcp_word_hdr *)(tp))->words [3])
+
+enum {
+ TCP_FLAG_CWR = __constant_cpu_to_be32(0x00800000),
+ TCP_FLAG_ECE = __constant_cpu_to_be32(0x00400000),
+ TCP_FLAG_URG = __constant_cpu_to_be32(0x00200000),
+ TCP_FLAG_ACK = __constant_cpu_to_be32(0x00100000),
+ TCP_FLAG_PSH = __constant_cpu_to_be32(0x00080000),
+ TCP_FLAG_RST = __constant_cpu_to_be32(0x00040000),
+ TCP_FLAG_SYN = __constant_cpu_to_be32(0x00020000),
+ TCP_FLAG_FIN = __constant_cpu_to_be32(0x00010000),
+ TCP_RESERVED_BITS = __constant_cpu_to_be32(0x0F000000),
+ TCP_DATA_OFFSET = __constant_cpu_to_be32(0xF0000000)
+};
+
+/*
+ * TCP general constants
+ */
+#define TCP_MSS_DEFAULT 536U /* IPv4 (RFC1122, RFC2581) */
+#define TCP_MSS_DESIRED 1220U /* IPv6 (tunneled), EDNS0 (RFC3226) */
+
+/* TCP socket options */
+#define TCP_NODELAY 1 /* Turn off Nagle's algorithm. */
+#define TCP_MAXSEG 2 /* Limit MSS */
+#define TCP_CORK 3 /* Never send partially complete segments */
+#define TCP_KEEPIDLE 4 /* Start keeplives after this period */
+#define TCP_KEEPINTVL 5 /* Interval between keepalives */
+#define TCP_KEEPCNT 6 /* Number of keepalives before death */
+#define TCP_SYNCNT 7 /* Number of SYN retransmits */
+#define TCP_LINGER2 8 /* Life time of orphaned FIN-WAIT-2 state */
+#define TCP_DEFER_ACCEPT 9 /* Wake up listener only when data arrive */
+#define TCP_WINDOW_CLAMP 10 /* Bound advertised window */
+#define TCP_INFO 11 /* Information about this connection. */
+#define TCP_QUICKACK 12 /* Block/reenable quick acks */
+#define TCP_CONGESTION 13 /* Congestion control algorithm */
+#define TCP_MD5SIG 14 /* TCP MD5 Signature (RFC2385) */
+#define TCP_COOKIE_TRANSACTIONS 15 /* TCP Cookie Transactions */
+#define TCP_THIN_LINEAR_TIMEOUTS 16 /* Use linear timeouts for thin streams*/
+#define TCP_THIN_DUPACK 17 /* Fast retrans. after 1 dupack */
+#define TCP_USER_TIMEOUT 18 /* How long for loss retry before timeout */
+#define TCP_REPAIR 19 /* TCP sock is under repair right now */
+#define TCP_REPAIR_QUEUE 20
+#define TCP_QUEUE_SEQ 21
+#define TCP_REPAIR_OPTIONS 22
+#define TCP_FASTOPEN 23 /* Enable FastOpen on listeners */
+
+struct tcp_repair_opt {
+ __u32 opt_code;
+ __u32 opt_val;
+};
+
+enum {
+ TCP_NO_QUEUE,
+ TCP_RECV_QUEUE,
+ TCP_SEND_QUEUE,
+ TCP_QUEUES_NR,
+};
+
+/* for TCP_INFO socket option */
+#define TCPI_OPT_TIMESTAMPS 1
+#define TCPI_OPT_SACK 2
+#define TCPI_OPT_WSCALE 4
+#define TCPI_OPT_ECN 8 /* ECN was negociated at TCP session init */
+#define TCPI_OPT_ECN_SEEN 16 /* we received at least one packet with ECT */
+
+enum tcp_ca_state {
+ TCP_CA_Open = 0,
+#define TCPF_CA_Open (1<<TCP_CA_Open)
+ TCP_CA_Disorder = 1,
+#define TCPF_CA_Disorder (1<<TCP_CA_Disorder)
+ TCP_CA_CWR = 2,
+#define TCPF_CA_CWR (1<<TCP_CA_CWR)
+ TCP_CA_Recovery = 3,
+#define TCPF_CA_Recovery (1<<TCP_CA_Recovery)
+ TCP_CA_Loss = 4
+#define TCPF_CA_Loss (1<<TCP_CA_Loss)
+};
+
+struct tcp_info {
+ __u8 tcpi_state;
+ __u8 tcpi_ca_state;
+ __u8 tcpi_retransmits;
+ __u8 tcpi_probes;
+ __u8 tcpi_backoff;
+ __u8 tcpi_options;
+ __u8 tcpi_snd_wscale : 4, tcpi_rcv_wscale : 4;
+
+ __u32 tcpi_rto;
+ __u32 tcpi_ato;
+ __u32 tcpi_snd_mss;
+ __u32 tcpi_rcv_mss;
+
+ __u32 tcpi_unacked;
+ __u32 tcpi_sacked;
+ __u32 tcpi_lost;
+ __u32 tcpi_retrans;
+ __u32 tcpi_fackets;
+
+ /* Times. */
+ __u32 tcpi_last_data_sent;
+ __u32 tcpi_last_ack_sent; /* Not remembered, sorry. */
+ __u32 tcpi_last_data_recv;
+ __u32 tcpi_last_ack_recv;
+
+ /* Metrics. */
+ __u32 tcpi_pmtu;
+ __u32 tcpi_rcv_ssthresh;
+ __u32 tcpi_rtt;
+ __u32 tcpi_rttvar;
+ __u32 tcpi_snd_ssthresh;
+ __u32 tcpi_snd_cwnd;
+ __u32 tcpi_advmss;
+ __u32 tcpi_reordering;
+
+ __u32 tcpi_rcv_rtt;
+ __u32 tcpi_rcv_space;
+
+ __u32 tcpi_total_retrans;
+};
+
+/* for TCP_MD5SIG socket option */
+#define TCP_MD5SIG_MAXKEYLEN 80
+
+struct tcp_md5sig {
+ struct __kernel_sockaddr_storage tcpm_addr; /* address associated */
+ __u16 __tcpm_pad1; /* zero */
+ __u16 tcpm_keylen; /* key length */
+ __u32 __tcpm_pad2; /* zero */
+ __u8 tcpm_key[TCP_MD5SIG_MAXKEYLEN]; /* key (binary) */
+};
+
+/* for TCP_COOKIE_TRANSACTIONS (TCPCT) socket option */
+#define TCP_COOKIE_MIN 8 /* 64-bits */
+#define TCP_COOKIE_MAX 16 /* 128-bits */
+#define TCP_COOKIE_PAIR_SIZE (2*TCP_COOKIE_MAX)
+
+/* Flags for both getsockopt and setsockopt */
+#define TCP_COOKIE_IN_ALWAYS (1 << 0) /* Discard SYN without cookie */
+#define TCP_COOKIE_OUT_NEVER (1 << 1) /* Prohibit outgoing cookies,
+ * supercedes everything. */
+
+/* Flags for getsockopt */
+#define TCP_S_DATA_IN (1 << 2) /* Was data received? */
+#define TCP_S_DATA_OUT (1 << 3) /* Was data sent? */
+
+/* TCP_COOKIE_TRANSACTIONS data */
+struct tcp_cookie_transactions {
+ __u16 tcpct_flags; /* see above */
+ __u8 __tcpct_pad1; /* zero */
+ __u8 tcpct_cookie_desired; /* bytes */
+ __u16 tcpct_s_data_desired; /* bytes of variable data */
+ __u16 tcpct_used; /* bytes in value */
+ __u8 tcpct_value[TCP_MSS_DEFAULT];
+};
+
+
+#endif /* _UAPI_LINUX_TCP_H */
diff --git a/include/linux/tcp_metrics.h b/include/uapi/linux/tcp_metrics.h
similarity index 100%
rename from include/linux/tcp_metrics.h
rename to include/uapi/linux/tcp_metrics.h
diff --git a/include/linux/telephony.h b/include/uapi/linux/telephony.h
similarity index 100%
rename from include/linux/telephony.h
rename to include/uapi/linux/telephony.h
diff --git a/include/linux/termios.h b/include/uapi/linux/termios.h
similarity index 100%
rename from include/linux/termios.h
rename to include/uapi/linux/termios.h
diff --git a/include/uapi/linux/time.h b/include/uapi/linux/time.h
new file mode 100644
index 0000000..0d3c0ed
--- /dev/null
+++ b/include/uapi/linux/time.h
@@ -0,0 +1,71 @@
+#ifndef _UAPI_LINUX_TIME_H
+#define _UAPI_LINUX_TIME_H
+
+#include <linux/types.h>
+
+
+#ifndef _STRUCT_TIMESPEC
+#define _STRUCT_TIMESPEC
+struct timespec {
+ __kernel_time_t tv_sec; /* seconds */
+ long tv_nsec; /* nanoseconds */
+};
+#endif
+
+struct timeval {
+ __kernel_time_t tv_sec; /* seconds */
+ __kernel_suseconds_t tv_usec; /* microseconds */
+};
+
+struct timezone {
+ int tz_minuteswest; /* minutes west of Greenwich */
+ int tz_dsttime; /* type of dst correction */
+};
+
+
+/*
+ * Names of the interval timers, and structure
+ * defining a timer setting:
+ */
+#define ITIMER_REAL 0
+#define ITIMER_VIRTUAL 1
+#define ITIMER_PROF 2
+
+struct itimerspec {
+ struct timespec it_interval; /* timer period */
+ struct timespec it_value; /* timer expiration */
+};
+
+struct itimerval {
+ struct timeval it_interval; /* timer interval */
+ struct timeval it_value; /* current value */
+};
+
+/*
+ * The IDs of the various system clocks (for POSIX.1b interval timers):
+ */
+#define CLOCK_REALTIME 0
+#define CLOCK_MONOTONIC 1
+#define CLOCK_PROCESS_CPUTIME_ID 2
+#define CLOCK_THREAD_CPUTIME_ID 3
+#define CLOCK_MONOTONIC_RAW 4
+#define CLOCK_REALTIME_COARSE 5
+#define CLOCK_MONOTONIC_COARSE 6
+#define CLOCK_BOOTTIME 7
+#define CLOCK_REALTIME_ALARM 8
+#define CLOCK_BOOTTIME_ALARM 9
+
+/*
+ * The IDs of various hardware clocks:
+ */
+#define CLOCK_SGI_CYCLE 10
+#define MAX_CLOCKS 16
+#define CLOCKS_MASK (CLOCK_REALTIME | CLOCK_MONOTONIC)
+#define CLOCKS_MONO CLOCK_MONOTONIC
+
+/*
+ * The various flags for setting POSIX.1b interval timers:
+ */
+#define TIMER_ABSTIME 0x01
+
+#endif /* _UAPI_LINUX_TIME_H */
diff --git a/include/linux/times.h b/include/uapi/linux/times.h
similarity index 100%
rename from include/linux/times.h
rename to include/uapi/linux/times.h
diff --git a/include/uapi/linux/timex.h b/include/uapi/linux/timex.h
new file mode 100644
index 0000000..a7ea81f
--- /dev/null
+++ b/include/uapi/linux/timex.h
@@ -0,0 +1,166 @@
+/*****************************************************************************
+ * *
+ * Copyright (c) David L. Mills 1993 *
+ * *
+ * Permission to use, copy, modify, and distribute this software and its *
+ * documentation for any purpose and without fee is hereby granted, provided *
+ * that the above copyright notice appears in all copies and that both the *
+ * copyright notice and this permission notice appear in supporting *
+ * documentation, and that the name University of Delaware not be used in *
+ * advertising or publicity pertaining to distribution of the software *
+ * without specific, written prior permission. The University of Delaware *
+ * makes no representations about the suitability this software for any *
+ * purpose. It is provided "as is" without express or implied warranty. *
+ * *
+ *****************************************************************************/
+
+/*
+ * Modification history timex.h
+ *
+ * 29 Dec 97 Russell King
+ * Moved CLOCK_TICK_RATE, CLOCK_TICK_FACTOR and FINETUNE to asm/timex.h
+ * for ARM machines
+ *
+ * 9 Jan 97 Adrian Sun
+ * Shifted LATCH define to allow access to alpha machines.
+ *
+ * 26 Sep 94 David L. Mills
+ * Added defines for hybrid phase/frequency-lock loop.
+ *
+ * 19 Mar 94 David L. Mills
+ * Moved defines from kernel routines to header file and added new
+ * defines for PPS phase-lock loop.
+ *
+ * 20 Feb 94 David L. Mills
+ * Revised status codes and structures for external clock and PPS
+ * signal discipline.
+ *
+ * 28 Nov 93 David L. Mills
+ * Adjusted parameters to improve stability and increase poll
+ * interval.
+ *
+ * 17 Sep 93 David L. Mills
+ * Created file $NTP/include/sys/timex.h
+ * 07 Oct 93 Torsten Duwe
+ * Derived linux/timex.h
+ * 1995-08-13 Torsten Duwe
+ * kernel PLL updated to 1994-12-13 specs (rfc-1589)
+ * 1997-08-30 Ulrich Windl
+ * Added new constant NTP_PHASE_LIMIT
+ * 2004-08-12 Christoph Lameter
+ * Reworked time interpolation logic
+ */
+#ifndef _UAPI_LINUX_TIMEX_H
+#define _UAPI_LINUX_TIMEX_H
+
+#include <linux/time.h>
+
+#define NTP_API 4 /* NTP API version */
+
+/*
+ * syscall interface - used (mainly by NTP daemon)
+ * to discipline kernel clock oscillator
+ */
+struct timex {
+ unsigned int modes; /* mode selector */
+ long offset; /* time offset (usec) */
+ long freq; /* frequency offset (scaled ppm) */
+ long maxerror; /* maximum error (usec) */
+ long esterror; /* estimated error (usec) */
+ int status; /* clock command/status */
+ long constant; /* pll time constant */
+ long precision; /* clock precision (usec) (read only) */
+ long tolerance; /* clock frequency tolerance (ppm)
+ * (read only)
+ */
+ struct timeval time; /* (read only, except for ADJ_SETOFFSET) */
+ long tick; /* (modified) usecs between clock ticks */
+
+ long ppsfreq; /* pps frequency (scaled ppm) (ro) */
+ long jitter; /* pps jitter (us) (ro) */
+ int shift; /* interval duration (s) (shift) (ro) */
+ long stabil; /* pps stability (scaled ppm) (ro) */
+ long jitcnt; /* jitter limit exceeded (ro) */
+ long calcnt; /* calibration intervals (ro) */
+ long errcnt; /* calibration errors (ro) */
+ long stbcnt; /* stability limit exceeded (ro) */
+
+ int tai; /* TAI offset (ro) */
+
+ int :32; int :32; int :32; int :32;
+ int :32; int :32; int :32; int :32;
+ int :32; int :32; int :32;
+};
+
+/*
+ * Mode codes (timex.mode)
+ */
+#define ADJ_OFFSET 0x0001 /* time offset */
+#define ADJ_FREQUENCY 0x0002 /* frequency offset */
+#define ADJ_MAXERROR 0x0004 /* maximum time error */
+#define ADJ_ESTERROR 0x0008 /* estimated time error */
+#define ADJ_STATUS 0x0010 /* clock status */
+#define ADJ_TIMECONST 0x0020 /* pll time constant */
+#define ADJ_TAI 0x0080 /* set TAI offset */
+#define ADJ_SETOFFSET 0x0100 /* add 'time' to current time */
+#define ADJ_MICRO 0x1000 /* select microsecond resolution */
+#define ADJ_NANO 0x2000 /* select nanosecond resolution */
+#define ADJ_TICK 0x4000 /* tick value */
+
+#ifndef __KERNEL__
+#define ADJ_OFFSET_SINGLESHOT 0x8001 /* old-fashioned adjtime */
+#define ADJ_OFFSET_SS_READ 0xa001 /* read-only adjtime */
+#endif
+
+/* NTP userland likes the MOD_ prefix better */
+#define MOD_OFFSET ADJ_OFFSET
+#define MOD_FREQUENCY ADJ_FREQUENCY
+#define MOD_MAXERROR ADJ_MAXERROR
+#define MOD_ESTERROR ADJ_ESTERROR
+#define MOD_STATUS ADJ_STATUS
+#define MOD_TIMECONST ADJ_TIMECONST
+#define MOD_TAI ADJ_TAI
+#define MOD_MICRO ADJ_MICRO
+#define MOD_NANO ADJ_NANO
+
+
+/*
+ * Status codes (timex.status)
+ */
+#define STA_PLL 0x0001 /* enable PLL updates (rw) */
+#define STA_PPSFREQ 0x0002 /* enable PPS freq discipline (rw) */
+#define STA_PPSTIME 0x0004 /* enable PPS time discipline (rw) */
+#define STA_FLL 0x0008 /* select frequency-lock mode (rw) */
+
+#define STA_INS 0x0010 /* insert leap (rw) */
+#define STA_DEL 0x0020 /* delete leap (rw) */
+#define STA_UNSYNC 0x0040 /* clock unsynchronized (rw) */
+#define STA_FREQHOLD 0x0080 /* hold frequency (rw) */
+
+#define STA_PPSSIGNAL 0x0100 /* PPS signal present (ro) */
+#define STA_PPSJITTER 0x0200 /* PPS signal jitter exceeded (ro) */
+#define STA_PPSWANDER 0x0400 /* PPS signal wander exceeded (ro) */
+#define STA_PPSERROR 0x0800 /* PPS signal calibration error (ro) */
+
+#define STA_CLOCKERR 0x1000 /* clock hardware fault (ro) */
+#define STA_NANO 0x2000 /* resolution (0 = us, 1 = ns) (ro) */
+#define STA_MODE 0x4000 /* mode (0 = PLL, 1 = FLL) (ro) */
+#define STA_CLK 0x8000 /* clock source (0 = A, 1 = B) (ro) */
+
+/* read-only bits */
+#define STA_RONLY (STA_PPSSIGNAL | STA_PPSJITTER | STA_PPSWANDER | \
+ STA_PPSERROR | STA_CLOCKERR | STA_NANO | STA_MODE | STA_CLK)
+
+/*
+ * Clock states (time_state)
+ */
+#define TIME_OK 0 /* clock synchronized, no leap second */
+#define TIME_INS 1 /* insert leap second */
+#define TIME_DEL 2 /* delete leap second */
+#define TIME_OOP 3 /* leap second in progress */
+#define TIME_WAIT 4 /* leap second has occurred */
+#define TIME_ERROR 5 /* clock not synchronized */
+#define TIME_BAD TIME_ERROR /* bw compat */
+
+
+#endif /* _UAPI_LINUX_TIMEX_H */
diff --git a/include/linux/tiocl.h b/include/uapi/linux/tiocl.h
similarity index 100%
rename from include/linux/tiocl.h
rename to include/uapi/linux/tiocl.h
diff --git a/include/linux/tipc.h b/include/uapi/linux/tipc.h
similarity index 100%
rename from include/linux/tipc.h
rename to include/uapi/linux/tipc.h
diff --git a/include/linux/tipc_config.h b/include/uapi/linux/tipc_config.h
similarity index 100%
rename from include/linux/tipc_config.h
rename to include/uapi/linux/tipc_config.h
diff --git a/include/uapi/linux/toshiba.h b/include/uapi/linux/toshiba.h
new file mode 100644
index 0000000..e9bef5b
--- /dev/null
+++ b/include/uapi/linux/toshiba.h
@@ -0,0 +1,37 @@
+/* toshiba.h -- Linux driver for accessing the SMM on Toshiba laptops
+ *
+ * Copyright (c) 1996-2000 Jonathan A. Buzzard (jonathan@buzzard.org.uk)
+ *
+ * Thanks to Juergen Heinzl <juergen@monocerus.demon.co.uk> for the pointers
+ * on making sure the structure is aligned and packed.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ */
+
+#ifndef _UAPI_LINUX_TOSHIBA_H
+#define _UAPI_LINUX_TOSHIBA_H
+
+#define TOSH_PROC "/proc/toshiba"
+#define TOSH_DEVICE "/dev/toshiba"
+#define TOSH_SMM _IOWR('t', 0x90, int) /* broken: meant 24 bytes */
+
+typedef struct {
+ unsigned int eax;
+ unsigned int ebx __attribute__ ((packed));
+ unsigned int ecx __attribute__ ((packed));
+ unsigned int edx __attribute__ ((packed));
+ unsigned int esi __attribute__ ((packed));
+ unsigned int edi __attribute__ ((packed));
+} SMMRegisters;
+
+
+#endif /* _UAPI_LINUX_TOSHIBA_H */
diff --git a/include/uapi/linux/tty.h b/include/uapi/linux/tty.h
new file mode 100644
index 0000000..dac199a
--- /dev/null
+++ b/include/uapi/linux/tty.h
@@ -0,0 +1,38 @@
+#ifndef _UAPI_LINUX_TTY_H
+#define _UAPI_LINUX_TTY_H
+
+/*
+ * 'tty.h' defines some structures used by tty_io.c and some defines.
+ */
+
+#define NR_LDISCS 30
+
+/* line disciplines */
+#define N_TTY 0
+#define N_SLIP 1
+#define N_MOUSE 2
+#define N_PPP 3
+#define N_STRIP 4
+#define N_AX25 5
+#define N_X25 6 /* X.25 async */
+#define N_6PACK 7
+#define N_MASC 8 /* Reserved for Mobitex module <kaz@cafe.net> */
+#define N_R3964 9 /* Reserved for Simatic R3964 module */
+#define N_PROFIBUS_FDL 10 /* Reserved for Profibus */
+#define N_IRDA 11 /* Linux IrDa - http://irda.sourceforge.net/ */
+#define N_SMSBLOCK 12 /* SMS block mode - for talking to GSM data */
+ /* cards about SMS messages */
+#define N_HDLC 13 /* synchronous HDLC */
+#define N_SYNC_PPP 14 /* synchronous PPP */
+#define N_HCI 15 /* Bluetooth HCI UART */
+#define N_GIGASET_M101 16 /* Siemens Gigaset M101 serial DECT adapter */
+#define N_SLCAN 17 /* Serial / USB serial CAN Adaptors */
+#define N_PPS 18 /* Pulse per Second */
+#define N_V253 19 /* Codec control over voice modem */
+#define N_CAIF 20 /* CAIF protocol for talking to modems */
+#define N_GSM0710 21 /* GSM 0710 Mux */
+#define N_TI_WL 22 /* for TI's WL BT, FM, GPS combo chips */
+#define N_TRACESINK 23 /* Trace data routing for MIPI P1149.7 */
+#define N_TRACEROUTER 24 /* Trace data routing for MIPI P1149.7 */
+
+#endif /* _UAPI_LINUX_TTY_H */
diff --git a/include/linux/tty_flags.h b/include/uapi/linux/tty_flags.h
similarity index 100%
rename from include/linux/tty_flags.h
rename to include/uapi/linux/tty_flags.h
diff --git a/include/uapi/linux/types.h b/include/uapi/linux/types.h
new file mode 100644
index 0000000..acf0979
--- /dev/null
+++ b/include/uapi/linux/types.h
@@ -0,0 +1,56 @@
+#ifndef _UAPI_LINUX_TYPES_H
+#define _UAPI_LINUX_TYPES_H
+
+#include <asm/types.h>
+
+#ifndef __ASSEMBLY__
+#ifndef __KERNEL__
+#ifndef __EXPORTED_HEADERS__
+#warning "Attempt to use kernel headers from user space, see http://kernelnewbies.org/KernelHeaders"
+#endif /* __EXPORTED_HEADERS__ */
+#endif
+
+#include <linux/posix_types.h>
+
+
+/*
+ * Below are truly Linux-specific types that should never collide with
+ * any application/library that wants linux/types.h.
+ */
+
+#ifdef __CHECKER__
+#define __bitwise__ __attribute__((bitwise))
+#else
+#define __bitwise__
+#endif
+#ifdef __CHECK_ENDIAN__
+#define __bitwise __bitwise__
+#else
+#define __bitwise
+#endif
+
+typedef __u16 __bitwise __le16;
+typedef __u16 __bitwise __be16;
+typedef __u32 __bitwise __le32;
+typedef __u32 __bitwise __be32;
+typedef __u64 __bitwise __le64;
+typedef __u64 __bitwise __be64;
+
+typedef __u16 __bitwise __sum16;
+typedef __u32 __bitwise __wsum;
+
+/*
+ * aligned_u64 should be used in defining kernel<->userspace ABIs to avoid
+ * common 32/64-bit compat problems.
+ * 64-bit values align to 4-byte boundaries on x86_32 (and possibly other
+ * architectures) and to 8-byte boundaries on 64-bit architectures. The new
+ * aligned_64 type enforces 8-byte alignment so that structs containing
+ * aligned_64 values have the same alignment on 32-bit and 64-bit architectures.
+ * No conversions are necessary between 32-bit user-space and a 64-bit kernel.
+ */
+#define __aligned_u64 __u64 __attribute__((aligned(8)))
+#define __aligned_be64 __be64 __attribute__((aligned(8)))
+#define __aligned_le64 __le64 __attribute__((aligned(8)))
+
+#endif /* __ASSEMBLY__ */
+#endif /* _UAPI_LINUX_TYPES_H */
diff --git a/include/linux/udf_fs_i.h b/include/uapi/linux/udf_fs_i.h
similarity index 100%
rename from include/linux/udf_fs_i.h
rename to include/uapi/linux/udf_fs_i.h
diff --git a/include/uapi/linux/udp.h b/include/uapi/linux/udp.h
new file mode 100644
index 0000000..e2bcfd7
--- /dev/null
+++ b/include/uapi/linux/udp.h
@@ -0,0 +1,39 @@
+/*
+ * INET An implementation of the TCP/IP protocol suite for the LINUX
+ * operating system. INET is implemented using the BSD Socket
+ * interface as the means of communication with the user level.
+ *
+ * Definitions for the UDP protocol.
+ *
+ * Version: @(#)udp.h 1.0.2 04/28/93
+ *
+ * Author: Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _UAPI_LINUX_UDP_H
+#define _UAPI_LINUX_UDP_H
+
+#include <linux/types.h>
+
+struct udphdr {
+ __be16 source;
+ __be16 dest;
+ __be16 len;
+ __sum16 check;
+};
+
+/* UDP socket options */
+#define UDP_CORK 1 /* Never send partially complete segments */
+#define UDP_ENCAP 100 /* Set the socket to accept encapsulated packets */
+
+/* UDP encapsulation types */
+#define UDP_ENCAP_ESPINUDP_NON_IKE 1 /* draft-ietf-ipsec-nat-t-ike-00/01 */
+#define UDP_ENCAP_ESPINUDP 2 /* draft-ietf-ipsec-udp-encaps-06 */
+#define UDP_ENCAP_L2TPINUDP 3 /* rfc2661 */
+
+
+#endif /* _UAPI_LINUX_UDP_H */
diff --git a/include/linux/uhid.h b/include/uapi/linux/uhid.h
similarity index 100%
rename from include/linux/uhid.h
rename to include/uapi/linux/uhid.h
diff --git a/include/uapi/linux/uinput.h b/include/uapi/linux/uinput.h
new file mode 100644
index 0000000..fe46431
--- /dev/null
+++ b/include/uapi/linux/uinput.h
@@ -0,0 +1,137 @@
+/*
+ * User level driver support for input subsystem
+ *
+ * Heavily based on evdev.c by Vojtech Pavlik
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Author: Aristeu Sergio Rozanski Filho <aris@cathedrallabs.org>
+ *
+ * Changes/Revisions:
+ * 0.3 24/05/2006 (Anssi Hannula <anssi.hannulagmail.com>)
+ * - update ff support for the changes in kernel interface
+ * - add UINPUT_VERSION
+ * 0.2 16/10/2004 (Micah Dowty <micah@navi.cx>)
+ * - added force feedback support
+ * - added UI_SET_PHYS
+ * 0.1 20/06/2002
+ * - first public version
+ */
+#ifndef _UAPI__UINPUT_H_
+#define _UAPI__UINPUT_H_
+
+#include <linux/types.h>
+#include <linux/input.h>
+
+#define UINPUT_VERSION 3
+
+
+struct uinput_ff_upload {
+ __u32 request_id;
+ __s32 retval;
+ struct ff_effect effect;
+ struct ff_effect old;
+};
+
+struct uinput_ff_erase {
+ __u32 request_id;
+ __s32 retval;
+ __u32 effect_id;
+};
+
+/* ioctl */
+#define UINPUT_IOCTL_BASE 'U'
+#define UI_DEV_CREATE _IO(UINPUT_IOCTL_BASE, 1)
+#define UI_DEV_DESTROY _IO(UINPUT_IOCTL_BASE, 2)
+
+#define UI_SET_EVBIT _IOW(UINPUT_IOCTL_BASE, 100, int)
+#define UI_SET_KEYBIT _IOW(UINPUT_IOCTL_BASE, 101, int)
+#define UI_SET_RELBIT _IOW(UINPUT_IOCTL_BASE, 102, int)
+#define UI_SET_ABSBIT _IOW(UINPUT_IOCTL_BASE, 103, int)
+#define UI_SET_MSCBIT _IOW(UINPUT_IOCTL_BASE, 104, int)
+#define UI_SET_LEDBIT _IOW(UINPUT_IOCTL_BASE, 105, int)
+#define UI_SET_SNDBIT _IOW(UINPUT_IOCTL_BASE, 106, int)
+#define UI_SET_FFBIT _IOW(UINPUT_IOCTL_BASE, 107, int)
+#define UI_SET_PHYS _IOW(UINPUT_IOCTL_BASE, 108, char*)
+#define UI_SET_SWBIT _IOW(UINPUT_IOCTL_BASE, 109, int)
+#define UI_SET_PROPBIT _IOW(UINPUT_IOCTL_BASE, 110, int)
+
+#define UI_BEGIN_FF_UPLOAD _IOWR(UINPUT_IOCTL_BASE, 200, struct uinput_ff_upload)
+#define UI_END_FF_UPLOAD _IOW(UINPUT_IOCTL_BASE, 201, struct uinput_ff_upload)
+#define UI_BEGIN_FF_ERASE _IOWR(UINPUT_IOCTL_BASE, 202, struct uinput_ff_erase)
+#define UI_END_FF_ERASE _IOW(UINPUT_IOCTL_BASE, 203, struct uinput_ff_erase)
+
+/*
+ * To write a force-feedback-capable driver, the upload_effect
+ * and erase_effect callbacks in input_dev must be implemented.
+ * The uinput driver will generate a fake input event when one of
+ * these callbacks are invoked. The userspace code then uses
+ * ioctls to retrieve additional parameters and send the return code.
+ * The callback blocks until this return code is sent.
+ *
+ * The described callback mechanism is only used if ff_effects_max
+ * is set.
+ *
+ * To implement upload_effect():
+ * 1. Wait for an event with type == EV_UINPUT and code == UI_FF_UPLOAD.
+ * A request ID will be given in 'value'.
+ * 2. Allocate a uinput_ff_upload struct, fill in request_id with
+ * the 'value' from the EV_UINPUT event.
+ * 3. Issue a UI_BEGIN_FF_UPLOAD ioctl, giving it the
+ * uinput_ff_upload struct. It will be filled in with the
+ * ff_effects passed to upload_effect().
+ * 4. Perform the effect upload, and place a return code back into
+ the uinput_ff_upload struct.
+ * 5. Issue a UI_END_FF_UPLOAD ioctl, also giving it the
+ * uinput_ff_upload_effect struct. This will complete execution
+ * of our upload_effect() handler.
+ *
+ * To implement erase_effect():
+ * 1. Wait for an event with type == EV_UINPUT and code == UI_FF_ERASE.
+ * A request ID will be given in 'value'.
+ * 2. Allocate a uinput_ff_erase struct, fill in request_id with
+ * the 'value' from the EV_UINPUT event.
+ * 3. Issue a UI_BEGIN_FF_ERASE ioctl, giving it the
+ * uinput_ff_erase struct. It will be filled in with the
+ * effect ID passed to erase_effect().
+ * 4. Perform the effect erasure, and place a return code back
+ * into the uinput_ff_erase struct.
+ * 5. Issue a UI_END_FF_ERASE ioctl, also giving it the
+ * uinput_ff_erase_effect struct. This will complete execution
+ * of our erase_effect() handler.
+ */
+
+/*
+ * This is the new event type, used only by uinput.
+ * 'code' is UI_FF_UPLOAD or UI_FF_ERASE, and 'value'
+ * is the unique request ID. This number was picked
+ * arbitrarily, above EV_MAX (since the input system
+ * never sees it) but in the range of a 16-bit int.
+ */
+#define EV_UINPUT 0x0101
+#define UI_FF_UPLOAD 1
+#define UI_FF_ERASE 2
+
+#define UINPUT_MAX_NAME_SIZE 80
+struct uinput_user_dev {
+ char name[UINPUT_MAX_NAME_SIZE];
+ struct input_id id;
+ __u32 ff_effects_max;
+ __s32 absmax[ABS_CNT];
+ __s32 absmin[ABS_CNT];
+ __s32 absfuzz[ABS_CNT];
+ __s32 absflat[ABS_CNT];
+};
+#endif /* _UAPI__UINPUT_H_ */
diff --git a/include/uapi/linux/uio.h b/include/uapi/linux/uio.h
new file mode 100644
index 0000000..2731d56
--- /dev/null
+++ b/include/uapi/linux/uio.h
@@ -0,0 +1,30 @@
+/*
+ * Berkeley style UIO structures - Alan Cox 1994.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _UAPI__LINUX_UIO_H
+#define _UAPI__LINUX_UIO_H
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+
+
+struct iovec
+{
+ void __user *iov_base; /* BSD uses caddr_t (1003.1g requires void *) */
+ __kernel_size_t iov_len; /* Must be size_t (1003.1g) */
+};
+
+/*
+ * UIO_MAXIOV shall be at least 16 1003.1g (5.4.1.1)
+ */
+
+#define UIO_FASTIOV 8
+#define UIO_MAXIOV 1024
+
+
+#endif /* _UAPI__LINUX_UIO_H */
diff --git a/include/linux/ultrasound.h b/include/uapi/linux/ultrasound.h
similarity index 100%
rename from include/linux/ultrasound.h
rename to include/uapi/linux/ultrasound.h
diff --git a/include/linux/un.h b/include/uapi/linux/un.h
similarity index 100%
rename from include/linux/un.h
rename to include/uapi/linux/un.h
diff --git a/include/linux/unistd.h b/include/uapi/linux/unistd.h
similarity index 100%
rename from include/linux/unistd.h
rename to include/uapi/linux/unistd.h
diff --git a/include/linux/unix_diag.h b/include/uapi/linux/unix_diag.h
similarity index 100%
rename from include/linux/unix_diag.h
rename to include/uapi/linux/unix_diag.h
diff --git a/include/uapi/linux/usbdevice_fs.h b/include/uapi/linux/usbdevice_fs.h
new file mode 100644
index 0000000..0c65e4b
--- /dev/null
+++ b/include/uapi/linux/usbdevice_fs.h
@@ -0,0 +1,180 @@
+/*****************************************************************************/
+
+/*
+ * usbdevice_fs.h -- USB device file system.
+ *
+ * Copyright (C) 2000
+ * Thomas Sailer (sailer@ife.ee.ethz.ch)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * History:
+ * 0.1 04.01.2000 Created
+ */
+
+/*****************************************************************************/
+
+#ifndef _UAPI_LINUX_USBDEVICE_FS_H
+#define _UAPI_LINUX_USBDEVICE_FS_H
+
+#include <linux/types.h>
+#include <linux/magic.h>
+
+/* --------------------------------------------------------------------- */
+
+/* usbdevfs ioctl codes */
+
+struct usbdevfs_ctrltransfer {
+ __u8 bRequestType;
+ __u8 bRequest;
+ __u16 wValue;
+ __u16 wIndex;
+ __u16 wLength;
+ __u32 timeout; /* in milliseconds */
+ void __user *data;
+};
+
+struct usbdevfs_bulktransfer {
+ unsigned int ep;
+ unsigned int len;
+ unsigned int timeout; /* in milliseconds */
+ void __user *data;
+};
+
+struct usbdevfs_setinterface {
+ unsigned int interface;
+ unsigned int altsetting;
+};
+
+struct usbdevfs_disconnectsignal {
+ unsigned int signr;
+ void __user *context;
+};
+
+#define USBDEVFS_MAXDRIVERNAME 255
+
+struct usbdevfs_getdriver {
+ unsigned int interface;
+ char driver[USBDEVFS_MAXDRIVERNAME + 1];
+};
+
+struct usbdevfs_connectinfo {
+ unsigned int devnum;
+ unsigned char slow;
+};
+
+#define USBDEVFS_URB_SHORT_NOT_OK 0x01
+#define USBDEVFS_URB_ISO_ASAP 0x02
+#define USBDEVFS_URB_BULK_CONTINUATION 0x04
+#define USBDEVFS_URB_NO_FSBR 0x20
+#define USBDEVFS_URB_ZERO_PACKET 0x40
+#define USBDEVFS_URB_NO_INTERRUPT 0x80
+
+#define USBDEVFS_URB_TYPE_ISO 0
+#define USBDEVFS_URB_TYPE_INTERRUPT 1
+#define USBDEVFS_URB_TYPE_CONTROL 2
+#define USBDEVFS_URB_TYPE_BULK 3
+
+struct usbdevfs_iso_packet_desc {
+ unsigned int length;
+ unsigned int actual_length;
+ unsigned int status;
+};
+
+struct usbdevfs_urb {
+ unsigned char type;
+ unsigned char endpoint;
+ int status;
+ unsigned int flags;
+ void __user *buffer;
+ int buffer_length;
+ int actual_length;
+ int start_frame;
+ int number_of_packets;
+ int error_count;
+ unsigned int signr; /* signal to be sent on completion,
+ or 0 if none should be sent. */
+ void __user *usercontext;
+ struct usbdevfs_iso_packet_desc iso_frame_desc[0];
+};
+
+/* ioctls for talking directly to drivers */
+struct usbdevfs_ioctl {
+ int ifno; /* interface 0..N ; negative numbers reserved */
+ int ioctl_code; /* MUST encode size + direction of data so the
+ * macros in <asm/ioctl.h> give correct values */
+ void __user *data; /* param buffer (in, or out) */
+};
+
+/* You can do most things with hubs just through control messages,
+ * except find out what device connects to what port. */
+struct usbdevfs_hub_portinfo {
+ char nports; /* number of downstream ports in this hub */
+ char port [127]; /* e.g. port 3 connects to device 27 */
+};
+
+/* Device capability flags */
+#define USBDEVFS_CAP_ZERO_PACKET 0x01
+#define USBDEVFS_CAP_BULK_CONTINUATION 0x02
+#define USBDEVFS_CAP_NO_PACKET_SIZE_LIM 0x04
+#define USBDEVFS_CAP_BULK_SCATTER_GATHER 0x08
+
+/* USBDEVFS_DISCONNECT_CLAIM flags & struct */
+
+/* disconnect-and-claim if the driver matches the driver field */
+#define USBDEVFS_DISCONNECT_CLAIM_IF_DRIVER 0x01
+/* disconnect-and-claim except when the driver matches the driver field */
+#define USBDEVFS_DISCONNECT_CLAIM_EXCEPT_DRIVER 0x02
+
+struct usbdevfs_disconnect_claim {
+ unsigned int interface;
+ unsigned int flags;
+ char driver[USBDEVFS_MAXDRIVERNAME + 1];
+};
+
+
+#define USBDEVFS_CONTROL _IOWR('U', 0, struct usbdevfs_ctrltransfer)
+#define USBDEVFS_CONTROL32 _IOWR('U', 0, struct usbdevfs_ctrltransfer32)
+#define USBDEVFS_BULK _IOWR('U', 2, struct usbdevfs_bulktransfer)
+#define USBDEVFS_BULK32 _IOWR('U', 2, struct usbdevfs_bulktransfer32)
+#define USBDEVFS_RESETEP _IOR('U', 3, unsigned int)
+#define USBDEVFS_SETINTERFACE _IOR('U', 4, struct usbdevfs_setinterface)
+#define USBDEVFS_SETCONFIGURATION _IOR('U', 5, unsigned int)
+#define USBDEVFS_GETDRIVER _IOW('U', 8, struct usbdevfs_getdriver)
+#define USBDEVFS_SUBMITURB _IOR('U', 10, struct usbdevfs_urb)
+#define USBDEVFS_SUBMITURB32 _IOR('U', 10, struct usbdevfs_urb32)
+#define USBDEVFS_DISCARDURB _IO('U', 11)
+#define USBDEVFS_REAPURB _IOW('U', 12, void *)
+#define USBDEVFS_REAPURB32 _IOW('U', 12, __u32)
+#define USBDEVFS_REAPURBNDELAY _IOW('U', 13, void *)
+#define USBDEVFS_REAPURBNDELAY32 _IOW('U', 13, __u32)
+#define USBDEVFS_DISCSIGNAL _IOR('U', 14, struct usbdevfs_disconnectsignal)
+#define USBDEVFS_DISCSIGNAL32 _IOR('U', 14, struct usbdevfs_disconnectsignal32)
+#define USBDEVFS_CLAIMINTERFACE _IOR('U', 15, unsigned int)
+#define USBDEVFS_RELEASEINTERFACE _IOR('U', 16, unsigned int)
+#define USBDEVFS_CONNECTINFO _IOW('U', 17, struct usbdevfs_connectinfo)
+#define USBDEVFS_IOCTL _IOWR('U', 18, struct usbdevfs_ioctl)
+#define USBDEVFS_IOCTL32 _IOWR('U', 18, struct usbdevfs_ioctl32)
+#define USBDEVFS_HUB_PORTINFO _IOR('U', 19, struct usbdevfs_hub_portinfo)
+#define USBDEVFS_RESET _IO('U', 20)
+#define USBDEVFS_CLEAR_HALT _IOR('U', 21, unsigned int)
+#define USBDEVFS_DISCONNECT _IO('U', 22)
+#define USBDEVFS_CONNECT _IO('U', 23)
+#define USBDEVFS_CLAIM_PORT _IOR('U', 24, unsigned int)
+#define USBDEVFS_RELEASE_PORT _IOR('U', 25, unsigned int)
+#define USBDEVFS_GET_CAPABILITIES _IOR('U', 26, __u32)
+#define USBDEVFS_DISCONNECT_CLAIM _IOR('U', 27, struct usbdevfs_disconnect_claim)
+
+#endif /* _UAPI_LINUX_USBDEVICE_FS_H */
diff --git a/include/linux/utime.h b/include/uapi/linux/utime.h
similarity index 100%
rename from include/linux/utime.h
rename to include/uapi/linux/utime.h
diff --git a/include/uapi/linux/utsname.h b/include/uapi/linux/utsname.h
new file mode 100644
index 0000000..872c2df
--- /dev/null
+++ b/include/uapi/linux/utsname.h
@@ -0,0 +1,34 @@
+#ifndef _UAPI_LINUX_UTSNAME_H
+#define _UAPI_LINUX_UTSNAME_H
+
+#define __OLD_UTS_LEN 8
+
+struct oldold_utsname {
+ char sysname[9];
+ char nodename[9];
+ char release[9];
+ char version[9];
+ char machine[9];
+};
+
+#define __NEW_UTS_LEN 64
+
+struct old_utsname {
+ char sysname[65];
+ char nodename[65];
+ char release[65];
+ char version[65];
+ char machine[65];
+};
+
+struct new_utsname {
+ char sysname[__NEW_UTS_LEN + 1];
+ char nodename[__NEW_UTS_LEN + 1];
+ char release[__NEW_UTS_LEN + 1];
+ char version[__NEW_UTS_LEN + 1];
+ char machine[__NEW_UTS_LEN + 1];
+ char domainname[__NEW_UTS_LEN + 1];
+};
+
+
+#endif /* _UAPI_LINUX_UTSNAME_H */
diff --git a/include/uapi/linux/uuid.h b/include/uapi/linux/uuid.h
new file mode 100644
index 0000000..786f077
--- /dev/null
+++ b/include/uapi/linux/uuid.h
@@ -0,0 +1,58 @@
+/*
+ * UUID/GUID definition
+ *
+ * Copyright (C) 2010, Intel Corp.
+ * Huang Ying <ying.huang@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation;
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef _UAPI_LINUX_UUID_H_
+#define _UAPI_LINUX_UUID_H_
+
+#include <linux/types.h>
+#include <linux/string.h>
+
+typedef struct {
+ __u8 b[16];
+} uuid_le;
+
+typedef struct {
+ __u8 b[16];
+} uuid_be;
+
+#define UUID_LE(a, b, c, d0, d1, d2, d3, d4, d5, d6, d7) \
+((uuid_le) \
+{{ (a) & 0xff, ((a) >> 8) & 0xff, ((a) >> 16) & 0xff, ((a) >> 24) & 0xff, \
+ (b) & 0xff, ((b) >> 8) & 0xff, \
+ (c) & 0xff, ((c) >> 8) & 0xff, \
+ (d0), (d1), (d2), (d3), (d4), (d5), (d6), (d7) }})
+
+#define UUID_BE(a, b, c, d0, d1, d2, d3, d4, d5, d6, d7) \
+((uuid_be) \
+{{ ((a) >> 24) & 0xff, ((a) >> 16) & 0xff, ((a) >> 8) & 0xff, (a) & 0xff, \
+ ((b) >> 8) & 0xff, (b) & 0xff, \
+ ((c) >> 8) & 0xff, (c) & 0xff, \
+ (d0), (d1), (d2), (d3), (d4), (d5), (d6), (d7) }})
+
+#define NULL_UUID_LE \
+ UUID_LE(0x00000000, 0x0000, 0x0000, 0x00, 0x00, 0x00, 0x00, \
+ 0x00, 0x00, 0x00, 0x00)
+
+#define NULL_UUID_BE \
+ UUID_BE(0x00000000, 0x0000, 0x0000, 0x00, 0x00, 0x00, 0x00, \
+ 0x00, 0x00, 0x00, 0x00)
+
+
+#endif /* _UAPI_LINUX_UUID_H_ */
diff --git a/include/linux/uvcvideo.h b/include/uapi/linux/uvcvideo.h
similarity index 100%
rename from include/linux/uvcvideo.h
rename to include/uapi/linux/uvcvideo.h
diff --git a/include/linux/v4l2-common.h b/include/uapi/linux/v4l2-common.h
similarity index 100%
rename from include/linux/v4l2-common.h
rename to include/uapi/linux/v4l2-common.h
diff --git a/include/linux/v4l2-controls.h b/include/uapi/linux/v4l2-controls.h
similarity index 100%
rename from include/linux/v4l2-controls.h
rename to include/uapi/linux/v4l2-controls.h
diff --git a/include/linux/v4l2-dv-timings.h b/include/uapi/linux/v4l2-dv-timings.h
similarity index 100%
rename from include/linux/v4l2-dv-timings.h
rename to include/uapi/linux/v4l2-dv-timings.h
diff --git a/include/linux/v4l2-mediabus.h b/include/uapi/linux/v4l2-mediabus.h
similarity index 100%
rename from include/linux/v4l2-mediabus.h
rename to include/uapi/linux/v4l2-mediabus.h
diff --git a/include/linux/v4l2-subdev.h b/include/uapi/linux/v4l2-subdev.h
similarity index 100%
rename from include/linux/v4l2-subdev.h
rename to include/uapi/linux/v4l2-subdev.h
diff --git a/include/linux/veth.h b/include/uapi/linux/veth.h
similarity index 100%
rename from include/linux/veth.h
rename to include/uapi/linux/veth.h
diff --git a/include/uapi/linux/vfio.h b/include/uapi/linux/vfio.h
new file mode 100644
index 0000000..4758d1b
--- /dev/null
+++ b/include/uapi/linux/vfio.h
@@ -0,0 +1,368 @@
+/*
+ * VFIO API definition
+ *
+ * Copyright (C) 2012 Red Hat, Inc. All rights reserved.
+ * Author: Alex Williamson <alex.williamson@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef _UAPIVFIO_H
+#define _UAPIVFIO_H
+
+#include <linux/types.h>
+#include <linux/ioctl.h>
+
+#define VFIO_API_VERSION 0
+
+
+/* Kernel & User level defines for VFIO IOCTLs. */
+
+/* Extensions */
+
+#define VFIO_TYPE1_IOMMU 1
+
+/*
+ * The IOCTL interface is designed for extensibility by embedding the
+ * structure length (argsz) and flags into structures passed between
+ * kernel and userspace. We therefore use the _IO() macro for these
+ * defines to avoid implicitly embedding a size into the ioctl request.
+ * As structure fields are added, argsz will increase to match and flag
+ * bits will be defined to indicate additional fields with valid data.
+ * It's *always* the caller's responsibility to indicate the size of
+ * the structure passed by setting argsz appropriately.
+ */
+
+#define VFIO_TYPE (';')
+#define VFIO_BASE 100
+
+/* -------- IOCTLs for VFIO file descriptor (/dev/vfio/vfio) -------- */
+
+/**
+ * VFIO_GET_API_VERSION - _IO(VFIO_TYPE, VFIO_BASE + 0)
+ *
+ * Report the version of the VFIO API. This allows us to bump the entire
+ * API version should we later need to add or change features in incompatible
+ * ways.
+ * Return: VFIO_API_VERSION
+ * Availability: Always
+ */
+#define VFIO_GET_API_VERSION _IO(VFIO_TYPE, VFIO_BASE + 0)
+
+/**
+ * VFIO_CHECK_EXTENSION - _IOW(VFIO_TYPE, VFIO_BASE + 1, __u32)
+ *
+ * Check whether an extension is supported.
+ * Return: 0 if not supported, 1 (or some other positive integer) if supported.
+ * Availability: Always
+ */
+#define VFIO_CHECK_EXTENSION _IO(VFIO_TYPE, VFIO_BASE + 1)
+
+/**
+ * VFIO_SET_IOMMU - _IOW(VFIO_TYPE, VFIO_BASE + 2, __s32)
+ *
+ * Set the iommu to the given type. The type must be supported by an
+ * iommu driver as verified by calling CHECK_EXTENSION using the same
+ * type. A group must be set to this file descriptor before this
+ * ioctl is available. The IOMMU interfaces enabled by this call are
+ * specific to the value set.
+ * Return: 0 on success, -errno on failure
+ * Availability: When VFIO group attached
+ */
+#define VFIO_SET_IOMMU _IO(VFIO_TYPE, VFIO_BASE + 2)
+
+/* -------- IOCTLs for GROUP file descriptors (/dev/vfio/$GROUP) -------- */
+
+/**
+ * VFIO_GROUP_GET_STATUS - _IOR(VFIO_TYPE, VFIO_BASE + 3,
+ * struct vfio_group_status)
+ *
+ * Retrieve information about the group. Fills in provided
+ * struct vfio_group_info. Caller sets argsz.
+ * Return: 0 on succes, -errno on failure.
+ * Availability: Always
+ */
+struct vfio_group_status {
+ __u32 argsz;
+ __u32 flags;
+#define VFIO_GROUP_FLAGS_VIABLE (1 << 0)
+#define VFIO_GROUP_FLAGS_CONTAINER_SET (1 << 1)
+};
+#define VFIO_GROUP_GET_STATUS _IO(VFIO_TYPE, VFIO_BASE + 3)
+
+/**
+ * VFIO_GROUP_SET_CONTAINER - _IOW(VFIO_TYPE, VFIO_BASE + 4, __s32)
+ *
+ * Set the container for the VFIO group to the open VFIO file
+ * descriptor provided. Groups may only belong to a single
+ * container. Containers may, at their discretion, support multiple
+ * groups. Only when a container is set are all of the interfaces
+ * of the VFIO file descriptor and the VFIO group file descriptor
+ * available to the user.
+ * Return: 0 on success, -errno on failure.
+ * Availability: Always
+ */
+#define VFIO_GROUP_SET_CONTAINER _IO(VFIO_TYPE, VFIO_BASE + 4)
+
+/**
+ * VFIO_GROUP_UNSET_CONTAINER - _IO(VFIO_TYPE, VFIO_BASE + 5)
+ *
+ * Remove the group from the attached container. This is the
+ * opposite of the SET_CONTAINER call and returns the group to
+ * an initial state. All device file descriptors must be released
+ * prior to calling this interface. When removing the last group
+ * from a container, the IOMMU will be disabled and all state lost,
+ * effectively also returning the VFIO file descriptor to an initial
+ * state.
+ * Return: 0 on success, -errno on failure.
+ * Availability: When attached to container
+ */
+#define VFIO_GROUP_UNSET_CONTAINER _IO(VFIO_TYPE, VFIO_BASE + 5)
+
+/**
+ * VFIO_GROUP_GET_DEVICE_FD - _IOW(VFIO_TYPE, VFIO_BASE + 6, char)
+ *
+ * Return a new file descriptor for the device object described by
+ * the provided string. The string should match a device listed in
+ * the devices subdirectory of the IOMMU group sysfs entry. The
+ * group containing the device must already be added to this context.
+ * Return: new file descriptor on success, -errno on failure.
+ * Availability: When attached to container
+ */
+#define VFIO_GROUP_GET_DEVICE_FD _IO(VFIO_TYPE, VFIO_BASE + 6)
+
+/* --------------- IOCTLs for DEVICE file descriptors --------------- */
+
+/**
+ * VFIO_DEVICE_GET_INFO - _IOR(VFIO_TYPE, VFIO_BASE + 7,
+ * struct vfio_device_info)
+ *
+ * Retrieve information about the device. Fills in provided
+ * struct vfio_device_info. Caller sets argsz.
+ * Return: 0 on success, -errno on failure.
+ */
+struct vfio_device_info {
+ __u32 argsz;
+ __u32 flags;
+#define VFIO_DEVICE_FLAGS_RESET (1 << 0) /* Device supports reset */
+#define VFIO_DEVICE_FLAGS_PCI (1 << 1) /* vfio-pci device */
+ __u32 num_regions; /* Max region index + 1 */
+ __u32 num_irqs; /* Max IRQ index + 1 */
+};
+#define VFIO_DEVICE_GET_INFO _IO(VFIO_TYPE, VFIO_BASE + 7)
+
+/**
+ * VFIO_DEVICE_GET_REGION_INFO - _IOWR(VFIO_TYPE, VFIO_BASE + 8,
+ * struct vfio_region_info)
+ *
+ * Retrieve information about a device region. Caller provides
+ * struct vfio_region_info with index value set. Caller sets argsz.
+ * Implementation of region mapping is bus driver specific. This is
+ * intended to describe MMIO, I/O port, as well as bus specific
+ * regions (ex. PCI config space). Zero sized regions may be used
+ * to describe unimplemented regions (ex. unimplemented PCI BARs).
+ * Return: 0 on success, -errno on failure.
+ */
+struct vfio_region_info {
+ __u32 argsz;
+ __u32 flags;
+#define VFIO_REGION_INFO_FLAG_READ (1 << 0) /* Region supports read */
+#define VFIO_REGION_INFO_FLAG_WRITE (1 << 1) /* Region supports write */
+#define VFIO_REGION_INFO_FLAG_MMAP (1 << 2) /* Region supports mmap */
+ __u32 index; /* Region index */
+ __u32 resv; /* Reserved for alignment */
+ __u64 size; /* Region size (bytes) */
+ __u64 offset; /* Region offset from start of device fd */
+};
+#define VFIO_DEVICE_GET_REGION_INFO _IO(VFIO_TYPE, VFIO_BASE + 8)
+
+/**
+ * VFIO_DEVICE_GET_IRQ_INFO - _IOWR(VFIO_TYPE, VFIO_BASE + 9,
+ * struct vfio_irq_info)
+ *
+ * Retrieve information about a device IRQ. Caller provides
+ * struct vfio_irq_info with index value set. Caller sets argsz.
+ * Implementation of IRQ mapping is bus driver specific. Indexes
+ * using multiple IRQs are primarily intended to support MSI-like
+ * interrupt blocks. Zero count irq blocks may be used to describe
+ * unimplemented interrupt types.
+ *
+ * The EVENTFD flag indicates the interrupt index supports eventfd based
+ * signaling.
+ *
+ * The MASKABLE flags indicates the index supports MASK and UNMASK
+ * actions described below.
+ *
+ * AUTOMASKED indicates that after signaling, the interrupt line is
+ * automatically masked by VFIO and the user needs to unmask the line
+ * to receive new interrupts. This is primarily intended to distinguish
+ * level triggered interrupts.
+ *
+ * The NORESIZE flag indicates that the interrupt lines within the index
+ * are setup as a set and new subindexes cannot be enabled without first
+ * disabling the entire index. This is used for interrupts like PCI MSI
+ * and MSI-X where the driver may only use a subset of the available
+ * indexes, but VFIO needs to enable a specific number of vectors
+ * upfront. In the case of MSI-X, where the user can enable MSI-X and
+ * then add and unmask vectors, it's up to userspace to make the decision
+ * whether to allocate the maximum supported number of vectors or tear
+ * down setup and incrementally increase the vectors as each is enabled.
+ */
+struct vfio_irq_info {
+ __u32 argsz;
+ __u32 flags;
+#define VFIO_IRQ_INFO_EVENTFD (1 << 0)
+#define VFIO_IRQ_INFO_MASKABLE (1 << 1)
+#define VFIO_IRQ_INFO_AUTOMASKED (1 << 2)
+#define VFIO_IRQ_INFO_NORESIZE (1 << 3)
+ __u32 index; /* IRQ index */
+ __u32 count; /* Number of IRQs within this index */
+};
+#define VFIO_DEVICE_GET_IRQ_INFO _IO(VFIO_TYPE, VFIO_BASE + 9)
+
+/**
+ * VFIO_DEVICE_SET_IRQS - _IOW(VFIO_TYPE, VFIO_BASE + 10, struct vfio_irq_set)
+ *
+ * Set signaling, masking, and unmasking of interrupts. Caller provides
+ * struct vfio_irq_set with all fields set. 'start' and 'count' indicate
+ * the range of subindexes being specified.
+ *
+ * The DATA flags specify the type of data provided. If DATA_NONE, the
+ * operation performs the specified action immediately on the specified
+ * interrupt(s). For example, to unmask AUTOMASKED interrupt [0,0]:
+ * flags = (DATA_NONE|ACTION_UNMASK), index = 0, start = 0, count = 1.
+ *
+ * DATA_BOOL allows sparse support for the same on arrays of interrupts.
+ * For example, to mask interrupts [0,1] and [0,3] (but not [0,2]):
+ * flags = (DATA_BOOL|ACTION_MASK), index = 0, start = 1, count = 3,
+ * data = {1,0,1}
+ *
+ * DATA_EVENTFD binds the specified ACTION to the provided __s32 eventfd.
+ * A value of -1 can be used to either de-assign interrupts if already
+ * assigned or skip un-assigned interrupts. For example, to set an eventfd
+ * to be trigger for interrupts [0,0] and [0,2]:
+ * flags = (DATA_EVENTFD|ACTION_TRIGGER), index = 0, start = 0, count = 3,
+ * data = {fd1, -1, fd2}
+ * If index [0,1] is previously set, two count = 1 ioctls calls would be
+ * required to set [0,0] and [0,2] without changing [0,1].
+ *
+ * Once a signaling mechanism is set, DATA_BOOL or DATA_NONE can be used
+ * with ACTION_TRIGGER to perform kernel level interrupt loopback testing
+ * from userspace (ie. simulate hardware triggering).
+ *
+ * Setting of an event triggering mechanism to userspace for ACTION_TRIGGER
+ * enables the interrupt index for the device. Individual subindex interrupts
+ * can be disabled using the -1 value for DATA_EVENTFD or the index can be
+ * disabled as a whole with: flags = (DATA_NONE|ACTION_TRIGGER), count = 0.
+ *
+ * Note that ACTION_[UN]MASK specify user->kernel signaling (irqfds) while
+ * ACTION_TRIGGER specifies kernel->user signaling.
+ */
+struct vfio_irq_set {
+ __u32 argsz;
+ __u32 flags;
+#define VFIO_IRQ_SET_DATA_NONE (1 << 0) /* Data not present */
+#define VFIO_IRQ_SET_DATA_BOOL (1 << 1) /* Data is bool (u8) */
+#define VFIO_IRQ_SET_DATA_EVENTFD (1 << 2) /* Data is eventfd (s32) */
+#define VFIO_IRQ_SET_ACTION_MASK (1 << 3) /* Mask interrupt */
+#define VFIO_IRQ_SET_ACTION_UNMASK (1 << 4) /* Unmask interrupt */
+#define VFIO_IRQ_SET_ACTION_TRIGGER (1 << 5) /* Trigger interrupt */
+ __u32 index;
+ __u32 start;
+ __u32 count;
+ __u8 data[];
+};
+#define VFIO_DEVICE_SET_IRQS _IO(VFIO_TYPE, VFIO_BASE + 10)
+
+#define VFIO_IRQ_SET_DATA_TYPE_MASK (VFIO_IRQ_SET_DATA_NONE | \
+ VFIO_IRQ_SET_DATA_BOOL | \
+ VFIO_IRQ_SET_DATA_EVENTFD)
+#define VFIO_IRQ_SET_ACTION_TYPE_MASK (VFIO_IRQ_SET_ACTION_MASK | \
+ VFIO_IRQ_SET_ACTION_UNMASK | \
+ VFIO_IRQ_SET_ACTION_TRIGGER)
+/**
+ * VFIO_DEVICE_RESET - _IO(VFIO_TYPE, VFIO_BASE + 11)
+ *
+ * Reset a device.
+ */
+#define VFIO_DEVICE_RESET _IO(VFIO_TYPE, VFIO_BASE + 11)
+
+/*
+ * The VFIO-PCI bus driver makes use of the following fixed region and
+ * IRQ index mapping. Unimplemented regions return a size of zero.
+ * Unimplemented IRQ types return a count of zero.
+ */
+
+enum {
+ VFIO_PCI_BAR0_REGION_INDEX,
+ VFIO_PCI_BAR1_REGION_INDEX,
+ VFIO_PCI_BAR2_REGION_INDEX,
+ VFIO_PCI_BAR3_REGION_INDEX,
+ VFIO_PCI_BAR4_REGION_INDEX,
+ VFIO_PCI_BAR5_REGION_INDEX,
+ VFIO_PCI_ROM_REGION_INDEX,
+ VFIO_PCI_CONFIG_REGION_INDEX,
+ VFIO_PCI_NUM_REGIONS
+};
+
+enum {
+ VFIO_PCI_INTX_IRQ_INDEX,
+ VFIO_PCI_MSI_IRQ_INDEX,
+ VFIO_PCI_MSIX_IRQ_INDEX,
+ VFIO_PCI_NUM_IRQS
+};
+
+/* -------- API for Type1 VFIO IOMMU -------- */
+
+/**
+ * VFIO_IOMMU_GET_INFO - _IOR(VFIO_TYPE, VFIO_BASE + 12, struct vfio_iommu_info)
+ *
+ * Retrieve information about the IOMMU object. Fills in provided
+ * struct vfio_iommu_info. Caller sets argsz.
+ *
+ * XXX Should we do these by CHECK_EXTENSION too?
+ */
+struct vfio_iommu_type1_info {
+ __u32 argsz;
+ __u32 flags;
+#define VFIO_IOMMU_INFO_PGSIZES (1 << 0) /* supported page sizes info */
+ __u64 iova_pgsizes; /* Bitmap of supported page sizes */
+};
+
+#define VFIO_IOMMU_GET_INFO _IO(VFIO_TYPE, VFIO_BASE + 12)
+
+/**
+ * VFIO_IOMMU_MAP_DMA - _IOW(VFIO_TYPE, VFIO_BASE + 13, struct vfio_dma_map)
+ *
+ * Map process virtual addresses to IO virtual addresses using the
+ * provided struct vfio_dma_map. Caller sets argsz. READ &/ WRITE required.
+ */
+struct vfio_iommu_type1_dma_map {
+ __u32 argsz;
+ __u32 flags;
+#define VFIO_DMA_MAP_FLAG_READ (1 << 0) /* readable from device */
+#define VFIO_DMA_MAP_FLAG_WRITE (1 << 1) /* writable from device */
+ __u64 vaddr; /* Process virtual address */
+ __u64 iova; /* IO virtual address */
+ __u64 size; /* Size of mapping (bytes) */
+};
+
+#define VFIO_IOMMU_MAP_DMA _IO(VFIO_TYPE, VFIO_BASE + 13)
+
+/**
+ * VFIO_IOMMU_UNMAP_DMA - _IOW(VFIO_TYPE, VFIO_BASE + 14, struct vfio_dma_unmap)
+ *
+ * Unmap IO virtual addresses using the provided struct vfio_dma_unmap.
+ * Caller sets argsz.
+ */
+struct vfio_iommu_type1_dma_unmap {
+ __u32 argsz;
+ __u32 flags;
+ __u64 iova; /* IO virtual address */
+ __u64 size; /* Size of mapping (bytes) */
+};
+
+#define VFIO_IOMMU_UNMAP_DMA _IO(VFIO_TYPE, VFIO_BASE + 14)
+
+#endif /* _UAPIVFIO_H */
diff --git a/include/linux/vhost.h b/include/uapi/linux/vhost.h
similarity index 100%
rename from include/linux/vhost.h
rename to include/uapi/linux/vhost.h
diff --git a/include/uapi/linux/videodev2.h b/include/uapi/linux/videodev2.h
new file mode 100644
index 0000000..57bfa59
--- /dev/null
+++ b/include/uapi/linux/videodev2.h
@@ -0,0 +1,1998 @@
+/*
+ * Video for Linux Two header file
+ *
+ * Copyright (C) 1999-2012 the contributors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Alternatively you can redistribute this file under the terms of the
+ * BSD license as stated below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * 3. The names of its contributors may not be used to endorse or promote
+ * products derived from this software without specific prior written
+ * permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
+ * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * Header file for v4l or V4L2 drivers and applications
+ * with public API.
+ * All kernel-specific stuff were moved to media/v4l2-dev.h, so
+ * no #if __KERNEL tests are allowed here
+ *
+ * See http://linuxtv.org for more info
+ *
+ * Author: Bill Dirks <bill@thedirks.org>
+ * Justin Schoeman
+ * Hans Verkuil <hverkuil@xs4all.nl>
+ * et al.
+ */
+#ifndef _UAPI__LINUX_VIDEODEV2_H
+#define _UAPI__LINUX_VIDEODEV2_H
+
+#ifndef __KERNEL__
+#include <sys/time.h>
+#endif
+#include <linux/compiler.h>
+#include <linux/ioctl.h>
+#include <linux/types.h>
+#include <linux/v4l2-common.h>
+#include <linux/v4l2-controls.h>
+
+/*
+ * Common stuff for both V4L1 and V4L2
+ * Moved from videodev.h
+ */
+#define VIDEO_MAX_FRAME 32
+#define VIDEO_MAX_PLANES 8
+
+#ifndef __KERNEL__
+
+/* These defines are V4L1 specific and should not be used with the V4L2 API!
+ They will be removed from this header in the future. */
+
+#define VID_TYPE_CAPTURE 1 /* Can capture */
+#define VID_TYPE_TUNER 2 /* Can tune */
+#define VID_TYPE_TELETEXT 4 /* Does teletext */
+#define VID_TYPE_OVERLAY 8 /* Overlay onto frame buffer */
+#define VID_TYPE_CHROMAKEY 16 /* Overlay by chromakey */
+#define VID_TYPE_CLIPPING 32 /* Can clip */
+#define VID_TYPE_FRAMERAM 64 /* Uses the frame buffer memory */
+#define VID_TYPE_SCALES 128 /* Scalable */
+#define VID_TYPE_MONOCHROME 256 /* Monochrome only */
+#define VID_TYPE_SUBCAPTURE 512 /* Can capture subareas of the image */
+#define VID_TYPE_MPEG_DECODER 1024 /* Can decode MPEG streams */
+#define VID_TYPE_MPEG_ENCODER 2048 /* Can encode MPEG streams */
+#define VID_TYPE_MJPEG_DECODER 4096 /* Can decode MJPEG streams */
+#define VID_TYPE_MJPEG_ENCODER 8192 /* Can encode MJPEG streams */
+#endif
+
+/*
+ * M I S C E L L A N E O U S
+ */
+
+/* Four-character-code (FOURCC) */
+#define v4l2_fourcc(a, b, c, d)\
+ ((__u32)(a) | ((__u32)(b) << 8) | ((__u32)(c) << 16) | ((__u32)(d) << 24))
+
+/*
+ * E N U M S
+ */
+enum v4l2_field {
+ V4L2_FIELD_ANY = 0, /* driver can choose from none,
+ top, bottom, interlaced
+ depending on whatever it thinks
+ is approximate ... */
+ V4L2_FIELD_NONE = 1, /* this device has no fields ... */
+ V4L2_FIELD_TOP = 2, /* top field only */
+ V4L2_FIELD_BOTTOM = 3, /* bottom field only */
+ V4L2_FIELD_INTERLACED = 4, /* both fields interlaced */
+ V4L2_FIELD_SEQ_TB = 5, /* both fields sequential into one
+ buffer, top-bottom order */
+ V4L2_FIELD_SEQ_BT = 6, /* same as above + bottom-top order */
+ V4L2_FIELD_ALTERNATE = 7, /* both fields alternating into
+ separate buffers */
+ V4L2_FIELD_INTERLACED_TB = 8, /* both fields interlaced, top field
+ first and the top field is
+ transmitted first */
+ V4L2_FIELD_INTERLACED_BT = 9, /* both fields interlaced, top field
+ first and the bottom field is
+ transmitted first */
+};
+#define V4L2_FIELD_HAS_TOP(field) \
+ ((field) == V4L2_FIELD_TOP ||\
+ (field) == V4L2_FIELD_INTERLACED ||\
+ (field) == V4L2_FIELD_INTERLACED_TB ||\
+ (field) == V4L2_FIELD_INTERLACED_BT ||\
+ (field) == V4L2_FIELD_SEQ_TB ||\
+ (field) == V4L2_FIELD_SEQ_BT)
+#define V4L2_FIELD_HAS_BOTTOM(field) \
+ ((field) == V4L2_FIELD_BOTTOM ||\
+ (field) == V4L2_FIELD_INTERLACED ||\
+ (field) == V4L2_FIELD_INTERLACED_TB ||\
+ (field) == V4L2_FIELD_INTERLACED_BT ||\
+ (field) == V4L2_FIELD_SEQ_TB ||\
+ (field) == V4L2_FIELD_SEQ_BT)
+#define V4L2_FIELD_HAS_BOTH(field) \
+ ((field) == V4L2_FIELD_INTERLACED ||\
+ (field) == V4L2_FIELD_INTERLACED_TB ||\
+ (field) == V4L2_FIELD_INTERLACED_BT ||\
+ (field) == V4L2_FIELD_SEQ_TB ||\
+ (field) == V4L2_FIELD_SEQ_BT)
+
+enum v4l2_buf_type {
+ V4L2_BUF_TYPE_VIDEO_CAPTURE = 1,
+ V4L2_BUF_TYPE_VIDEO_OUTPUT = 2,
+ V4L2_BUF_TYPE_VIDEO_OVERLAY = 3,
+ V4L2_BUF_TYPE_VBI_CAPTURE = 4,
+ V4L2_BUF_TYPE_VBI_OUTPUT = 5,
+ V4L2_BUF_TYPE_SLICED_VBI_CAPTURE = 6,
+ V4L2_BUF_TYPE_SLICED_VBI_OUTPUT = 7,
+#if 1
+ /* Experimental */
+ V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY = 8,
+#endif
+ V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE = 9,
+ V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE = 10,
+ /* Deprecated, do not use */
+ V4L2_BUF_TYPE_PRIVATE = 0x80,
+};
+
+#define V4L2_TYPE_IS_MULTIPLANAR(type) \
+ ((type) == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE \
+ || (type) == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE)
+
+#define V4L2_TYPE_IS_OUTPUT(type) \
+ ((type) == V4L2_BUF_TYPE_VIDEO_OUTPUT \
+ || (type) == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE \
+ || (type) == V4L2_BUF_TYPE_VIDEO_OVERLAY \
+ || (type) == V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY \
+ || (type) == V4L2_BUF_TYPE_VBI_OUTPUT \
+ || (type) == V4L2_BUF_TYPE_SLICED_VBI_OUTPUT)
+
+enum v4l2_tuner_type {
+ V4L2_TUNER_RADIO = 1,
+ V4L2_TUNER_ANALOG_TV = 2,
+ V4L2_TUNER_DIGITAL_TV = 3,
+};
+
+enum v4l2_memory {
+ V4L2_MEMORY_MMAP = 1,
+ V4L2_MEMORY_USERPTR = 2,
+ V4L2_MEMORY_OVERLAY = 3,
+};
+
+/* see also http://vektor.theorem.ca/graphics/ycbcr/ */
+enum v4l2_colorspace {
+ /* ITU-R 601 -- broadcast NTSC/PAL */
+ V4L2_COLORSPACE_SMPTE170M = 1,
+
+ /* 1125-Line (US) HDTV */
+ V4L2_COLORSPACE_SMPTE240M = 2,
+
+ /* HD and modern captures. */
+ V4L2_COLORSPACE_REC709 = 3,
+
+ /* broken BT878 extents (601, luma range 16-253 instead of 16-235) */
+ V4L2_COLORSPACE_BT878 = 4,
+
+ /* These should be useful. Assume 601 extents. */
+ V4L2_COLORSPACE_470_SYSTEM_M = 5,
+ V4L2_COLORSPACE_470_SYSTEM_BG = 6,
+
+ /* I know there will be cameras that send this. So, this is
+ * unspecified chromaticities and full 0-255 on each of the
+ * Y'CbCr components
+ */
+ V4L2_COLORSPACE_JPEG = 7,
+
+ /* For RGB colourspaces, this is probably a good start. */
+ V4L2_COLORSPACE_SRGB = 8,
+};
+
+enum v4l2_priority {
+ V4L2_PRIORITY_UNSET = 0, /* not initialized */
+ V4L2_PRIORITY_BACKGROUND = 1,
+ V4L2_PRIORITY_INTERACTIVE = 2,
+ V4L2_PRIORITY_RECORD = 3,
+ V4L2_PRIORITY_DEFAULT = V4L2_PRIORITY_INTERACTIVE,
+};
+
+struct v4l2_rect {
+ __s32 left;
+ __s32 top;
+ __s32 width;
+ __s32 height;
+};
+
+struct v4l2_fract {
+ __u32 numerator;
+ __u32 denominator;
+};
+
+/**
+ * struct v4l2_capability - Describes V4L2 device caps returned by VIDIOC_QUERYCAP
+ *
+ * @driver: name of the driver module (e.g. "bttv")
+ * @card: name of the card (e.g. "Hauppauge WinTV")
+ * @bus_info: name of the bus (e.g. "PCI:" + pci_name(pci_dev) )
+ * @version: KERNEL_VERSION
+ * @capabilities: capabilities of the physical device as a whole
+ * @device_caps: capabilities accessed via this particular device (node)
+ * @reserved: reserved fields for future extensions
+ */
+struct v4l2_capability {
+ __u8 driver[16];
+ __u8 card[32];
+ __u8 bus_info[32];
+ __u32 version;
+ __u32 capabilities;
+ __u32 device_caps;
+ __u32 reserved[3];
+};
+
+/* Values for 'capabilities' field */
+#define V4L2_CAP_VIDEO_CAPTURE 0x00000001 /* Is a video capture device */
+#define V4L2_CAP_VIDEO_OUTPUT 0x00000002 /* Is a video output device */
+#define V4L2_CAP_VIDEO_OVERLAY 0x00000004 /* Can do video overlay */
+#define V4L2_CAP_VBI_CAPTURE 0x00000010 /* Is a raw VBI capture device */
+#define V4L2_CAP_VBI_OUTPUT 0x00000020 /* Is a raw VBI output device */
+#define V4L2_CAP_SLICED_VBI_CAPTURE 0x00000040 /* Is a sliced VBI capture device */
+#define V4L2_CAP_SLICED_VBI_OUTPUT 0x00000080 /* Is a sliced VBI output device */
+#define V4L2_CAP_RDS_CAPTURE 0x00000100 /* RDS data capture */
+#define V4L2_CAP_VIDEO_OUTPUT_OVERLAY 0x00000200 /* Can do video output overlay */
+#define V4L2_CAP_HW_FREQ_SEEK 0x00000400 /* Can do hardware frequency seek */
+#define V4L2_CAP_RDS_OUTPUT 0x00000800 /* Is an RDS encoder */
+
+/* Is a video capture device that supports multiplanar formats */
+#define V4L2_CAP_VIDEO_CAPTURE_MPLANE 0x00001000
+/* Is a video output device that supports multiplanar formats */
+#define V4L2_CAP_VIDEO_OUTPUT_MPLANE 0x00002000
+/* Is a video mem-to-mem device that supports multiplanar formats */
+#define V4L2_CAP_VIDEO_M2M_MPLANE 0x00004000
+/* Is a video mem-to-mem device */
+#define V4L2_CAP_VIDEO_M2M 0x00008000
+
+#define V4L2_CAP_TUNER 0x00010000 /* has a tuner */
+#define V4L2_CAP_AUDIO 0x00020000 /* has audio support */
+#define V4L2_CAP_RADIO 0x00040000 /* is a radio device */
+#define V4L2_CAP_MODULATOR 0x00080000 /* has a modulator */
+
+#define V4L2_CAP_READWRITE 0x01000000 /* read/write systemcalls */
+#define V4L2_CAP_ASYNCIO 0x02000000 /* async I/O */
+#define V4L2_CAP_STREAMING 0x04000000 /* streaming I/O ioctls */
+
+#define V4L2_CAP_DEVICE_CAPS 0x80000000 /* sets device capabilities field */
+
+/*
+ * V I D E O I M A G E F O R M A T
+ */
+struct v4l2_pix_format {
+ __u32 width;
+ __u32 height;
+ __u32 pixelformat;
+ __u32 field; /* enum v4l2_field */
+ __u32 bytesperline; /* for padding, zero if unused */
+ __u32 sizeimage;
+ __u32 colorspace; /* enum v4l2_colorspace */
+ __u32 priv; /* private data, depends on pixelformat */
+};
+
+/* Pixel format FOURCC depth Description */
+
+/* RGB formats */
+#define V4L2_PIX_FMT_RGB332 v4l2_fourcc('R', 'G', 'B', '1') /* 8 RGB-3-3-2 */
+#define V4L2_PIX_FMT_RGB444 v4l2_fourcc('R', '4', '4', '4') /* 16 xxxxrrrr ggggbbbb */
+#define V4L2_PIX_FMT_RGB555 v4l2_fourcc('R', 'G', 'B', 'O') /* 16 RGB-5-5-5 */
+#define V4L2_PIX_FMT_RGB565 v4l2_fourcc('R', 'G', 'B', 'P') /* 16 RGB-5-6-5 */
+#define V4L2_PIX_FMT_RGB555X v4l2_fourcc('R', 'G', 'B', 'Q') /* 16 RGB-5-5-5 BE */
+#define V4L2_PIX_FMT_RGB565X v4l2_fourcc('R', 'G', 'B', 'R') /* 16 RGB-5-6-5 BE */
+#define V4L2_PIX_FMT_BGR666 v4l2_fourcc('B', 'G', 'R', 'H') /* 18 BGR-6-6-6 */
+#define V4L2_PIX_FMT_BGR24 v4l2_fourcc('B', 'G', 'R', '3') /* 24 BGR-8-8-8 */
+#define V4L2_PIX_FMT_RGB24 v4l2_fourcc('R', 'G', 'B', '3') /* 24 RGB-8-8-8 */
+#define V4L2_PIX_FMT_BGR32 v4l2_fourcc('B', 'G', 'R', '4') /* 32 BGR-8-8-8-8 */
+#define V4L2_PIX_FMT_RGB32 v4l2_fourcc('R', 'G', 'B', '4') /* 32 RGB-8-8-8-8 */
+
+/* Grey formats */
+#define V4L2_PIX_FMT_GREY v4l2_fourcc('G', 'R', 'E', 'Y') /* 8 Greyscale */
+#define V4L2_PIX_FMT_Y4 v4l2_fourcc('Y', '0', '4', ' ') /* 4 Greyscale */
+#define V4L2_PIX_FMT_Y6 v4l2_fourcc('Y', '0', '6', ' ') /* 6 Greyscale */
+#define V4L2_PIX_FMT_Y10 v4l2_fourcc('Y', '1', '0', ' ') /* 10 Greyscale */
+#define V4L2_PIX_FMT_Y12 v4l2_fourcc('Y', '1', '2', ' ') /* 12 Greyscale */
+#define V4L2_PIX_FMT_Y16 v4l2_fourcc('Y', '1', '6', ' ') /* 16 Greyscale */
+
+/* Grey bit-packed formats */
+#define V4L2_PIX_FMT_Y10BPACK v4l2_fourcc('Y', '1', '0', 'B') /* 10 Greyscale bit-packed */
+
+/* Palette formats */
+#define V4L2_PIX_FMT_PAL8 v4l2_fourcc('P', 'A', 'L', '8') /* 8 8-bit palette */
+
+/* Luminance+Chrominance formats */
+#define V4L2_PIX_FMT_YVU410 v4l2_fourcc('Y', 'V', 'U', '9') /* 9 YVU 4:1:0 */
+#define V4L2_PIX_FMT_YVU420 v4l2_fourcc('Y', 'V', '1', '2') /* 12 YVU 4:2:0 */
+#define V4L2_PIX_FMT_YUYV v4l2_fourcc('Y', 'U', 'Y', 'V') /* 16 YUV 4:2:2 */
+#define V4L2_PIX_FMT_YYUV v4l2_fourcc('Y', 'Y', 'U', 'V') /* 16 YUV 4:2:2 */
+#define V4L2_PIX_FMT_YVYU v4l2_fourcc('Y', 'V', 'Y', 'U') /* 16 YVU 4:2:2 */
+#define V4L2_PIX_FMT_UYVY v4l2_fourcc('U', 'Y', 'V', 'Y') /* 16 YUV 4:2:2 */
+#define V4L2_PIX_FMT_VYUY v4l2_fourcc('V', 'Y', 'U', 'Y') /* 16 YUV 4:2:2 */
+#define V4L2_PIX_FMT_YUV422P v4l2_fourcc('4', '2', '2', 'P') /* 16 YVU422 planar */
+#define V4L2_PIX_FMT_YUV411P v4l2_fourcc('4', '1', '1', 'P') /* 16 YVU411 planar */
+#define V4L2_PIX_FMT_Y41P v4l2_fourcc('Y', '4', '1', 'P') /* 12 YUV 4:1:1 */
+#define V4L2_PIX_FMT_YUV444 v4l2_fourcc('Y', '4', '4', '4') /* 16 xxxxyyyy uuuuvvvv */
+#define V4L2_PIX_FMT_YUV555 v4l2_fourcc('Y', 'U', 'V', 'O') /* 16 YUV-5-5-5 */
+#define V4L2_PIX_FMT_YUV565 v4l2_fourcc('Y', 'U', 'V', 'P') /* 16 YUV-5-6-5 */
+#define V4L2_PIX_FMT_YUV32 v4l2_fourcc('Y', 'U', 'V', '4') /* 32 YUV-8-8-8-8 */
+#define V4L2_PIX_FMT_YUV410 v4l2_fourcc('Y', 'U', 'V', '9') /* 9 YUV 4:1:0 */
+#define V4L2_PIX_FMT_YUV420 v4l2_fourcc('Y', 'U', '1', '2') /* 12 YUV 4:2:0 */
+#define V4L2_PIX_FMT_HI240 v4l2_fourcc('H', 'I', '2', '4') /* 8 8-bit color */
+#define V4L2_PIX_FMT_HM12 v4l2_fourcc('H', 'M', '1', '2') /* 8 YUV 4:2:0 16x16 macroblocks */
+#define V4L2_PIX_FMT_M420 v4l2_fourcc('M', '4', '2', '0') /* 12 YUV 4:2:0 2 lines y, 1 line uv interleaved */
+
+/* two planes -- one Y, one Cr + Cb interleaved */
+#define V4L2_PIX_FMT_NV12 v4l2_fourcc('N', 'V', '1', '2') /* 12 Y/CbCr 4:2:0 */
+#define V4L2_PIX_FMT_NV21 v4l2_fourcc('N', 'V', '2', '1') /* 12 Y/CrCb 4:2:0 */
+#define V4L2_PIX_FMT_NV16 v4l2_fourcc('N', 'V', '1', '6') /* 16 Y/CbCr 4:2:2 */
+#define V4L2_PIX_FMT_NV61 v4l2_fourcc('N', 'V', '6', '1') /* 16 Y/CrCb 4:2:2 */
+#define V4L2_PIX_FMT_NV24 v4l2_fourcc('N', 'V', '2', '4') /* 24 Y/CbCr 4:4:4 */
+#define V4L2_PIX_FMT_NV42 v4l2_fourcc('N', 'V', '4', '2') /* 24 Y/CrCb 4:4:4 */
+
+/* two non contiguous planes - one Y, one Cr + Cb interleaved */
+#define V4L2_PIX_FMT_NV12M v4l2_fourcc('N', 'M', '1', '2') /* 12 Y/CbCr 4:2:0 */
+#define V4L2_PIX_FMT_NV21M v4l2_fourcc('N', 'M', '2', '1') /* 21 Y/CrCb 4:2:0 */
+#define V4L2_PIX_FMT_NV12MT v4l2_fourcc('T', 'M', '1', '2') /* 12 Y/CbCr 4:2:0 64x32 macroblocks */
+#define V4L2_PIX_FMT_NV12MT_16X16 v4l2_fourcc('V', 'M', '1', '2') /* 12 Y/CbCr 4:2:0 16x16 macroblocks */
+
+/* three non contiguous planes - Y, Cb, Cr */
+#define V4L2_PIX_FMT_YUV420M v4l2_fourcc('Y', 'M', '1', '2') /* 12 YUV420 planar */
+#define V4L2_PIX_FMT_YVU420M v4l2_fourcc('Y', 'M', '2', '1') /* 12 YVU420 planar */
+
+/* Bayer formats - see http://www.siliconimaging.com/RGB%20Bayer.htm */
+#define V4L2_PIX_FMT_SBGGR8 v4l2_fourcc('B', 'A', '8', '1') /* 8 BGBG.. GRGR.. */
+#define V4L2_PIX_FMT_SGBRG8 v4l2_fourcc('G', 'B', 'R', 'G') /* 8 GBGB.. RGRG.. */
+#define V4L2_PIX_FMT_SGRBG8 v4l2_fourcc('G', 'R', 'B', 'G') /* 8 GRGR.. BGBG.. */
+#define V4L2_PIX_FMT_SRGGB8 v4l2_fourcc('R', 'G', 'G', 'B') /* 8 RGRG.. GBGB.. */
+#define V4L2_PIX_FMT_SBGGR10 v4l2_fourcc('B', 'G', '1', '0') /* 10 BGBG.. GRGR.. */
+#define V4L2_PIX_FMT_SGBRG10 v4l2_fourcc('G', 'B', '1', '0') /* 10 GBGB.. RGRG.. */
+#define V4L2_PIX_FMT_SGRBG10 v4l2_fourcc('B', 'A', '1', '0') /* 10 GRGR.. BGBG.. */
+#define V4L2_PIX_FMT_SRGGB10 v4l2_fourcc('R', 'G', '1', '0') /* 10 RGRG.. GBGB.. */
+#define V4L2_PIX_FMT_SBGGR12 v4l2_fourcc('B', 'G', '1', '2') /* 12 BGBG.. GRGR.. */
+#define V4L2_PIX_FMT_SGBRG12 v4l2_fourcc('G', 'B', '1', '2') /* 12 GBGB.. RGRG.. */
+#define V4L2_PIX_FMT_SGRBG12 v4l2_fourcc('B', 'A', '1', '2') /* 12 GRGR.. BGBG.. */
+#define V4L2_PIX_FMT_SRGGB12 v4l2_fourcc('R', 'G', '1', '2') /* 12 RGRG.. GBGB.. */
+ /* 10bit raw bayer DPCM compressed to 8 bits */
+#define V4L2_PIX_FMT_SBGGR10DPCM8 v4l2_fourcc('b', 'B', 'A', '8')
+#define V4L2_PIX_FMT_SGBRG10DPCM8 v4l2_fourcc('b', 'G', 'A', '8')
+#define V4L2_PIX_FMT_SGRBG10DPCM8 v4l2_fourcc('B', 'D', '1', '0')
+#define V4L2_PIX_FMT_SRGGB10DPCM8 v4l2_fourcc('b', 'R', 'A', '8')
+ /*
+ * 10bit raw bayer, expanded to 16 bits
+ * xxxxrrrrrrrrrrxxxxgggggggggg xxxxggggggggggxxxxbbbbbbbbbb...
+ */
+#define V4L2_PIX_FMT_SBGGR16 v4l2_fourcc('B', 'Y', 'R', '2') /* 16 BGBG.. GRGR.. */
+
+/* compressed formats */
+#define V4L2_PIX_FMT_MJPEG v4l2_fourcc('M', 'J', 'P', 'G') /* Motion-JPEG */
+#define V4L2_PIX_FMT_JPEG v4l2_fourcc('J', 'P', 'E', 'G') /* JFIF JPEG */
+#define V4L2_PIX_FMT_DV v4l2_fourcc('d', 'v', 's', 'd') /* 1394 */
+#define V4L2_PIX_FMT_MPEG v4l2_fourcc('M', 'P', 'E', 'G') /* MPEG-1/2/4 Multiplexed */
+#define V4L2_PIX_FMT_H264 v4l2_fourcc('H', '2', '6', '4') /* H264 with start codes */
+#define V4L2_PIX_FMT_H264_NO_SC v4l2_fourcc('A', 'V', 'C', '1') /* H264 without start codes */
+#define V4L2_PIX_FMT_H264_MVC v4l2_fourcc('M', '2', '6', '4') /* H264 MVC */
+#define V4L2_PIX_FMT_H263 v4l2_fourcc('H', '2', '6', '3') /* H263 */
+#define V4L2_PIX_FMT_MPEG1 v4l2_fourcc('M', 'P', 'G', '1') /* MPEG-1 ES */
+#define V4L2_PIX_FMT_MPEG2 v4l2_fourcc('M', 'P', 'G', '2') /* MPEG-2 ES */
+#define V4L2_PIX_FMT_MPEG4 v4l2_fourcc('M', 'P', 'G', '4') /* MPEG-4 ES */
+#define V4L2_PIX_FMT_XVID v4l2_fourcc('X', 'V', 'I', 'D') /* Xvid */
+#define V4L2_PIX_FMT_VC1_ANNEX_G v4l2_fourcc('V', 'C', '1', 'G') /* SMPTE 421M Annex G compliant stream */
+#define V4L2_PIX_FMT_VC1_ANNEX_L v4l2_fourcc('V', 'C', '1', 'L') /* SMPTE 421M Annex L compliant stream */
+#define V4L2_PIX_FMT_VP8 v4l2_fourcc('V', 'P', '8', '0') /* VP8 */
+
+/* Vendor-specific formats */
+#define V4L2_PIX_FMT_CPIA1 v4l2_fourcc('C', 'P', 'I', 'A') /* cpia1 YUV */
+#define V4L2_PIX_FMT_WNVA v4l2_fourcc('W', 'N', 'V', 'A') /* Winnov hw compress */
+#define V4L2_PIX_FMT_SN9C10X v4l2_fourcc('S', '9', '1', '0') /* SN9C10x compression */
+#define V4L2_PIX_FMT_SN9C20X_I420 v4l2_fourcc('S', '9', '2', '0') /* SN9C20x YUV 4:2:0 */
+#define V4L2_PIX_FMT_PWC1 v4l2_fourcc('P', 'W', 'C', '1') /* pwc older webcam */
+#define V4L2_PIX_FMT_PWC2 v4l2_fourcc('P', 'W', 'C', '2') /* pwc newer webcam */
+#define V4L2_PIX_FMT_ET61X251 v4l2_fourcc('E', '6', '2', '5') /* ET61X251 compression */
+#define V4L2_PIX_FMT_SPCA501 v4l2_fourcc('S', '5', '0', '1') /* YUYV per line */
+#define V4L2_PIX_FMT_SPCA505 v4l2_fourcc('S', '5', '0', '5') /* YYUV per line */
+#define V4L2_PIX_FMT_SPCA508 v4l2_fourcc('S', '5', '0', '8') /* YUVY per line */
+#define V4L2_PIX_FMT_SPCA561 v4l2_fourcc('S', '5', '6', '1') /* compressed GBRG bayer */
+#define V4L2_PIX_FMT_PAC207 v4l2_fourcc('P', '2', '0', '7') /* compressed BGGR bayer */
+#define V4L2_PIX_FMT_MR97310A v4l2_fourcc('M', '3', '1', '0') /* compressed BGGR bayer */
+#define V4L2_PIX_FMT_JL2005BCD v4l2_fourcc('J', 'L', '2', '0') /* compressed RGGB bayer */
+#define V4L2_PIX_FMT_SN9C2028 v4l2_fourcc('S', 'O', 'N', 'X') /* compressed GBRG bayer */
+#define V4L2_PIX_FMT_SQ905C v4l2_fourcc('9', '0', '5', 'C') /* compressed RGGB bayer */
+#define V4L2_PIX_FMT_PJPG v4l2_fourcc('P', 'J', 'P', 'G') /* Pixart 73xx JPEG */
+#define V4L2_PIX_FMT_OV511 v4l2_fourcc('O', '5', '1', '1') /* ov511 JPEG */
+#define V4L2_PIX_FMT_OV518 v4l2_fourcc('O', '5', '1', '8') /* ov518 JPEG */
+#define V4L2_PIX_FMT_STV0680 v4l2_fourcc('S', '6', '8', '0') /* stv0680 bayer */
+#define V4L2_PIX_FMT_TM6000 v4l2_fourcc('T', 'M', '6', '0') /* tm5600/tm60x0 */
+#define V4L2_PIX_FMT_CIT_YYVYUY v4l2_fourcc('C', 'I', 'T', 'V') /* one line of Y then 1 line of VYUY */
+#define V4L2_PIX_FMT_KONICA420 v4l2_fourcc('K', 'O', 'N', 'I') /* YUV420 planar in blocks of 256 pixels */
+#define V4L2_PIX_FMT_JPGL v4l2_fourcc('J', 'P', 'G', 'L') /* JPEG-Lite */
+#define V4L2_PIX_FMT_SE401 v4l2_fourcc('S', '4', '0', '1') /* se401 janggu compressed rgb */
+#define V4L2_PIX_FMT_S5C_UYVY_JPG v4l2_fourcc('S', '5', 'C', 'I') /* S5C73M3 interleaved UYVY/JPEG */
+
+/*
+ * F O R M A T E N U M E R A T I O N
+ */
+struct v4l2_fmtdesc {
+ __u32 index; /* Format number */
+ __u32 type; /* enum v4l2_buf_type */
+ __u32 flags;
+ __u8 description[32]; /* Description string */
+ __u32 pixelformat; /* Format fourcc */
+ __u32 reserved[4];
+};
+
+#define V4L2_FMT_FLAG_COMPRESSED 0x0001
+#define V4L2_FMT_FLAG_EMULATED 0x0002
+
+#if 1
+ /* Experimental Frame Size and frame rate enumeration */
+/*
+ * F R A M E S I Z E E N U M E R A T I O N
+ */
+enum v4l2_frmsizetypes {
+ V4L2_FRMSIZE_TYPE_DISCRETE = 1,
+ V4L2_FRMSIZE_TYPE_CONTINUOUS = 2,
+ V4L2_FRMSIZE_TYPE_STEPWISE = 3,
+};
+
+struct v4l2_frmsize_discrete {
+ __u32 width; /* Frame width [pixel] */
+ __u32 height; /* Frame height [pixel] */
+};
+
+struct v4l2_frmsize_stepwise {
+ __u32 min_width; /* Minimum frame width [pixel] */
+ __u32 max_width; /* Maximum frame width [pixel] */
+ __u32 step_width; /* Frame width step size [pixel] */
+ __u32 min_height; /* Minimum frame height [pixel] */
+ __u32 max_height; /* Maximum frame height [pixel] */
+ __u32 step_height; /* Frame height step size [pixel] */
+};
+
+struct v4l2_frmsizeenum {
+ __u32 index; /* Frame size number */
+ __u32 pixel_format; /* Pixel format */
+ __u32 type; /* Frame size type the device supports. */
+
+ union { /* Frame size */
+ struct v4l2_frmsize_discrete discrete;
+ struct v4l2_frmsize_stepwise stepwise;
+ };
+
+ __u32 reserved[2]; /* Reserved space for future use */
+};
+
+/*
+ * F R A M E R A T E E N U M E R A T I O N
+ */
+enum v4l2_frmivaltypes {
+ V4L2_FRMIVAL_TYPE_DISCRETE = 1,
+ V4L2_FRMIVAL_TYPE_CONTINUOUS = 2,
+ V4L2_FRMIVAL_TYPE_STEPWISE = 3,
+};
+
+struct v4l2_frmival_stepwise {
+ struct v4l2_fract min; /* Minimum frame interval [s] */
+ struct v4l2_fract max; /* Maximum frame interval [s] */
+ struct v4l2_fract step; /* Frame interval step size [s] */
+};
+
+struct v4l2_frmivalenum {
+ __u32 index; /* Frame format index */
+ __u32 pixel_format; /* Pixel format */
+ __u32 width; /* Frame width */
+ __u32 height; /* Frame height */
+ __u32 type; /* Frame interval type the device supports. */
+
+ union { /* Frame interval */
+ struct v4l2_fract discrete;
+ struct v4l2_frmival_stepwise stepwise;
+ };
+
+ __u32 reserved[2]; /* Reserved space for future use */
+};
+#endif
+
+/*
+ * T I M E C O D E
+ */
+struct v4l2_timecode {
+ __u32 type;
+ __u32 flags;
+ __u8 frames;
+ __u8 seconds;
+ __u8 minutes;
+ __u8 hours;
+ __u8 userbits[4];
+};
+
+/* Type */
+#define V4L2_TC_TYPE_24FPS 1
+#define V4L2_TC_TYPE_25FPS 2
+#define V4L2_TC_TYPE_30FPS 3
+#define V4L2_TC_TYPE_50FPS 4
+#define V4L2_TC_TYPE_60FPS 5
+
+/* Flags */
+#define V4L2_TC_FLAG_DROPFRAME 0x0001 /* "drop-frame" mode */
+#define V4L2_TC_FLAG_COLORFRAME 0x0002
+#define V4L2_TC_USERBITS_field 0x000C
+#define V4L2_TC_USERBITS_USERDEFINED 0x0000
+#define V4L2_TC_USERBITS_8BITCHARS 0x0008
+/* The above is based on SMPTE timecodes */
+
+struct v4l2_jpegcompression {
+ int quality;
+
+ int APPn; /* Number of APP segment to be written,
+ * must be 0..15 */
+ int APP_len; /* Length of data in JPEG APPn segment */
+ char APP_data[60]; /* Data in the JPEG APPn segment. */
+
+ int COM_len; /* Length of data in JPEG COM segment */
+ char COM_data[60]; /* Data in JPEG COM segment */
+
+ __u32 jpeg_markers; /* Which markers should go into the JPEG
+ * output. Unless you exactly know what
+ * you do, leave them untouched.
+ * Inluding less markers will make the
+ * resulting code smaller, but there will
+ * be fewer applications which can read it.
+ * The presence of the APP and COM marker
+ * is influenced by APP_len and COM_len
+ * ONLY, not by this property! */
+
+#define V4L2_JPEG_MARKER_DHT (1<<3) /* Define Huffman Tables */
+#define V4L2_JPEG_MARKER_DQT (1<<4) /* Define Quantization Tables */
+#define V4L2_JPEG_MARKER_DRI (1<<5) /* Define Restart Interval */
+#define V4L2_JPEG_MARKER_COM (1<<6) /* Comment segment */
+#define V4L2_JPEG_MARKER_APP (1<<7) /* App segment, driver will
+ * allways use APP0 */
+};
+
+/*
+ * M E M O R Y - M A P P I N G B U F F E R S
+ */
+struct v4l2_requestbuffers {
+ __u32 count;
+ __u32 type; /* enum v4l2_buf_type */
+ __u32 memory; /* enum v4l2_memory */
+ __u32 reserved[2];
+};
+
+/**
+ * struct v4l2_plane - plane info for multi-planar buffers
+ * @bytesused: number of bytes occupied by data in the plane (payload)
+ * @length: size of this plane (NOT the payload) in bytes
+ * @mem_offset: when memory in the associated struct v4l2_buffer is
+ * V4L2_MEMORY_MMAP, equals the offset from the start of
+ * the device memory for this plane (or is a "cookie" that
+ * should be passed to mmap() called on the video node)
+ * @userptr: when memory is V4L2_MEMORY_USERPTR, a userspace pointer
+ * pointing to this plane
+ * @data_offset: offset in the plane to the start of data; usually 0,
+ * unless there is a header in front of the data
+ *
+ * Multi-planar buffers consist of one or more planes, e.g. an YCbCr buffer
+ * with two planes can have one plane for Y, and another for interleaved CbCr
+ * components. Each plane can reside in a separate memory buffer, or even in
+ * a completely separate memory node (e.g. in embedded devices).
+ */
+struct v4l2_plane {
+ __u32 bytesused;
+ __u32 length;
+ union {
+ __u32 mem_offset;
+ unsigned long userptr;
+ } m;
+ __u32 data_offset;
+ __u32 reserved[11];
+};
+
+/**
+ * struct v4l2_buffer - video buffer info
+ * @index: id number of the buffer
+ * @type: enum v4l2_buf_type; buffer type (type == *_MPLANE for
+ * multiplanar buffers);
+ * @bytesused: number of bytes occupied by data in the buffer (payload);
+ * unused (set to 0) for multiplanar buffers
+ * @flags: buffer informational flags
+ * @field: enum v4l2_field; field order of the image in the buffer
+ * @timestamp: frame timestamp
+ * @timecode: frame timecode
+ * @sequence: sequence count of this frame
+ * @memory: enum v4l2_memory; the method, in which the actual video data is
+ * passed
+ * @offset: for non-multiplanar buffers with memory == V4L2_MEMORY_MMAP;
+ * offset from the start of the device memory for this plane,
+ * (or a "cookie" that should be passed to mmap() as offset)
+ * @userptr: for non-multiplanar buffers with memory == V4L2_MEMORY_USERPTR;
+ * a userspace pointer pointing to this buffer
+ * @planes: for multiplanar buffers; userspace pointer to the array of plane
+ * info structs for this buffer
+ * @length: size in bytes of the buffer (NOT its payload) for single-plane
+ * buffers (when type != *_MPLANE); number of elements in the
+ * planes array for multi-plane buffers
+ * @input: input number from which the video data has has been captured
+ *
+ * Contains data exchanged by application and driver using one of the Streaming
+ * I/O methods.
+ */
+struct v4l2_buffer {
+ __u32 index;
+ __u32 type;
+ __u32 bytesused;
+ __u32 flags;
+ __u32 field;
+ struct timeval timestamp;
+ struct v4l2_timecode timecode;
+ __u32 sequence;
+
+ /* memory location */
+ __u32 memory;
+ union {
+ __u32 offset;
+ unsigned long userptr;
+ struct v4l2_plane *planes;
+ } m;
+ __u32 length;
+ __u32 reserved2;
+ __u32 reserved;
+};
+
+/* Flags for 'flags' field */
+#define V4L2_BUF_FLAG_MAPPED 0x0001 /* Buffer is mapped (flag) */
+#define V4L2_BUF_FLAG_QUEUED 0x0002 /* Buffer is queued for processing */
+#define V4L2_BUF_FLAG_DONE 0x0004 /* Buffer is ready */
+#define V4L2_BUF_FLAG_KEYFRAME 0x0008 /* Image is a keyframe (I-frame) */
+#define V4L2_BUF_FLAG_PFRAME 0x0010 /* Image is a P-frame */
+#define V4L2_BUF_FLAG_BFRAME 0x0020 /* Image is a B-frame */
+/* Buffer is ready, but the data contained within is corrupted. */
+#define V4L2_BUF_FLAG_ERROR 0x0040
+#define V4L2_BUF_FLAG_TIMECODE 0x0100 /* timecode field is valid */
+#define V4L2_BUF_FLAG_PREPARED 0x0400 /* Buffer is prepared for queuing */
+/* Cache handling flags */
+#define V4L2_BUF_FLAG_NO_CACHE_INVALIDATE 0x0800
+#define V4L2_BUF_FLAG_NO_CACHE_CLEAN 0x1000
+
+/*
+ * O V E R L A Y P R E V I E W
+ */
+struct v4l2_framebuffer {
+ __u32 capability;
+ __u32 flags;
+/* FIXME: in theory we should pass something like PCI device + memory
+ * region + offset instead of some physical address */
+ void *base;
+ struct v4l2_pix_format fmt;
+};
+/* Flags for the 'capability' field. Read only */
+#define V4L2_FBUF_CAP_EXTERNOVERLAY 0x0001
+#define V4L2_FBUF_CAP_CHROMAKEY 0x0002
+#define V4L2_FBUF_CAP_LIST_CLIPPING 0x0004
+#define V4L2_FBUF_CAP_BITMAP_CLIPPING 0x0008
+#define V4L2_FBUF_CAP_LOCAL_ALPHA 0x0010
+#define V4L2_FBUF_CAP_GLOBAL_ALPHA 0x0020
+#define V4L2_FBUF_CAP_LOCAL_INV_ALPHA 0x0040
+#define V4L2_FBUF_CAP_SRC_CHROMAKEY 0x0080
+/* Flags for the 'flags' field. */
+#define V4L2_FBUF_FLAG_PRIMARY 0x0001
+#define V4L2_FBUF_FLAG_OVERLAY 0x0002
+#define V4L2_FBUF_FLAG_CHROMAKEY 0x0004
+#define V4L2_FBUF_FLAG_LOCAL_ALPHA 0x0008
+#define V4L2_FBUF_FLAG_GLOBAL_ALPHA 0x0010
+#define V4L2_FBUF_FLAG_LOCAL_INV_ALPHA 0x0020
+#define V4L2_FBUF_FLAG_SRC_CHROMAKEY 0x0040
+
+struct v4l2_clip {
+ struct v4l2_rect c;
+ struct v4l2_clip __user *next;
+};
+
+struct v4l2_window {
+ struct v4l2_rect w;
+ __u32 field; /* enum v4l2_field */
+ __u32 chromakey;
+ struct v4l2_clip __user *clips;
+ __u32 clipcount;
+ void __user *bitmap;
+ __u8 global_alpha;
+};
+
+/*
+ * C A P T U R E P A R A M E T E R S
+ */
+struct v4l2_captureparm {
+ __u32 capability; /* Supported modes */
+ __u32 capturemode; /* Current mode */
+ struct v4l2_fract timeperframe; /* Time per frame in .1us units */
+ __u32 extendedmode; /* Driver-specific extensions */
+ __u32 readbuffers; /* # of buffers for read */
+ __u32 reserved[4];
+};
+
+/* Flags for 'capability' and 'capturemode' fields */
+#define V4L2_MODE_HIGHQUALITY 0x0001 /* High quality imaging mode */
+#define V4L2_CAP_TIMEPERFRAME 0x1000 /* timeperframe field is supported */
+
+struct v4l2_outputparm {
+ __u32 capability; /* Supported modes */
+ __u32 outputmode; /* Current mode */
+ struct v4l2_fract timeperframe; /* Time per frame in seconds */
+ __u32 extendedmode; /* Driver-specific extensions */
+ __u32 writebuffers; /* # of buffers for write */
+ __u32 reserved[4];
+};
+
+/*
+ * I N P U T I M A G E C R O P P I N G
+ */
+struct v4l2_cropcap {
+ __u32 type; /* enum v4l2_buf_type */
+ struct v4l2_rect bounds;
+ struct v4l2_rect defrect;
+ struct v4l2_fract pixelaspect;
+};
+
+struct v4l2_crop {
+ __u32 type; /* enum v4l2_buf_type */
+ struct v4l2_rect c;
+};
+
+/**
+ * struct v4l2_selection - selection info
+ * @type: buffer type (do not use *_MPLANE types)
+ * @target: Selection target, used to choose one of possible rectangles;
+ * defined in v4l2-common.h; V4L2_SEL_TGT_* .
+ * @flags: constraints flags, defined in v4l2-common.h; V4L2_SEL_FLAG_*.
+ * @r: coordinates of selection window
+ * @reserved: for future use, rounds structure size to 64 bytes, set to zero
+ *
+ * Hardware may use multiple helper windows to process a video stream.
+ * The structure is used to exchange this selection areas between
+ * an application and a driver.
+ */
+struct v4l2_selection {
+ __u32 type;
+ __u32 target;
+ __u32 flags;
+ struct v4l2_rect r;
+ __u32 reserved[9];
+};
+
+
+/*
+ * A N A L O G V I D E O S T A N D A R D
+ */
+
+typedef __u64 v4l2_std_id;
+
+/* one bit for each */
+#define V4L2_STD_PAL_B ((v4l2_std_id)0x00000001)
+#define V4L2_STD_PAL_B1 ((v4l2_std_id)0x00000002)
+#define V4L2_STD_PAL_G ((v4l2_std_id)0x00000004)
+#define V4L2_STD_PAL_H ((v4l2_std_id)0x00000008)
+#define V4L2_STD_PAL_I ((v4l2_std_id)0x00000010)
+#define V4L2_STD_PAL_D ((v4l2_std_id)0x00000020)
+#define V4L2_STD_PAL_D1 ((v4l2_std_id)0x00000040)
+#define V4L2_STD_PAL_K ((v4l2_std_id)0x00000080)
+
+#define V4L2_STD_PAL_M ((v4l2_std_id)0x00000100)
+#define V4L2_STD_PAL_N ((v4l2_std_id)0x00000200)
+#define V4L2_STD_PAL_Nc ((v4l2_std_id)0x00000400)
+#define V4L2_STD_PAL_60 ((v4l2_std_id)0x00000800)
+
+#define V4L2_STD_NTSC_M ((v4l2_std_id)0x00001000) /* BTSC */
+#define V4L2_STD_NTSC_M_JP ((v4l2_std_id)0x00002000) /* EIA-J */
+#define V4L2_STD_NTSC_443 ((v4l2_std_id)0x00004000)
+#define V4L2_STD_NTSC_M_KR ((v4l2_std_id)0x00008000) /* FM A2 */
+
+#define V4L2_STD_SECAM_B ((v4l2_std_id)0x00010000)
+#define V4L2_STD_SECAM_D ((v4l2_std_id)0x00020000)
+#define V4L2_STD_SECAM_G ((v4l2_std_id)0x00040000)
+#define V4L2_STD_SECAM_H ((v4l2_std_id)0x00080000)
+#define V4L2_STD_SECAM_K ((v4l2_std_id)0x00100000)
+#define V4L2_STD_SECAM_K1 ((v4l2_std_id)0x00200000)
+#define V4L2_STD_SECAM_L ((v4l2_std_id)0x00400000)
+#define V4L2_STD_SECAM_LC ((v4l2_std_id)0x00800000)
+
+/* ATSC/HDTV */
+#define V4L2_STD_ATSC_8_VSB ((v4l2_std_id)0x01000000)
+#define V4L2_STD_ATSC_16_VSB ((v4l2_std_id)0x02000000)
+
+/* FIXME:
+ Although std_id is 64 bits, there is an issue on PPC32 architecture that
+ makes switch(__u64) to break. So, there's a hack on v4l2-common.c rounding
+ this value to 32 bits.
+ As, currently, the max value is for V4L2_STD_ATSC_16_VSB (30 bits wide),
+ it should work fine. However, if needed to add more than two standards,
+ v4l2-common.c should be fixed.
+ */
+
+/*
+ * Some macros to merge video standards in order to make live easier for the
+ * drivers and V4L2 applications
+ */
+
+/*
+ * "Common" NTSC/M - It should be noticed that V4L2_STD_NTSC_443 is
+ * Missing here.
+ */
+#define V4L2_STD_NTSC (V4L2_STD_NTSC_M |\
+ V4L2_STD_NTSC_M_JP |\
+ V4L2_STD_NTSC_M_KR)
+/* Secam macros */
+#define V4L2_STD_SECAM_DK (V4L2_STD_SECAM_D |\
+ V4L2_STD_SECAM_K |\
+ V4L2_STD_SECAM_K1)
+/* All Secam Standards */
+#define V4L2_STD_SECAM (V4L2_STD_SECAM_B |\
+ V4L2_STD_SECAM_G |\
+ V4L2_STD_SECAM_H |\
+ V4L2_STD_SECAM_DK |\
+ V4L2_STD_SECAM_L |\
+ V4L2_STD_SECAM_LC)
+/* PAL macros */
+#define V4L2_STD_PAL_BG (V4L2_STD_PAL_B |\
+ V4L2_STD_PAL_B1 |\
+ V4L2_STD_PAL_G)
+#define V4L2_STD_PAL_DK (V4L2_STD_PAL_D |\
+ V4L2_STD_PAL_D1 |\
+ V4L2_STD_PAL_K)
+/*
+ * "Common" PAL - This macro is there to be compatible with the old
+ * V4L1 concept of "PAL": /BGDKHI.
+ * Several PAL standards are mising here: /M, /N and /Nc
+ */
+#define V4L2_STD_PAL (V4L2_STD_PAL_BG |\
+ V4L2_STD_PAL_DK |\
+ V4L2_STD_PAL_H |\
+ V4L2_STD_PAL_I)
+/* Chroma "agnostic" standards */
+#define V4L2_STD_B (V4L2_STD_PAL_B |\
+ V4L2_STD_PAL_B1 |\
+ V4L2_STD_SECAM_B)
+#define V4L2_STD_G (V4L2_STD_PAL_G |\
+ V4L2_STD_SECAM_G)
+#define V4L2_STD_H (V4L2_STD_PAL_H |\
+ V4L2_STD_SECAM_H)
+#define V4L2_STD_L (V4L2_STD_SECAM_L |\
+ V4L2_STD_SECAM_LC)
+#define V4L2_STD_GH (V4L2_STD_G |\
+ V4L2_STD_H)
+#define V4L2_STD_DK (V4L2_STD_PAL_DK |\
+ V4L2_STD_SECAM_DK)
+#define V4L2_STD_BG (V4L2_STD_B |\
+ V4L2_STD_G)
+#define V4L2_STD_MN (V4L2_STD_PAL_M |\
+ V4L2_STD_PAL_N |\
+ V4L2_STD_PAL_Nc |\
+ V4L2_STD_NTSC)
+
+/* Standards where MTS/BTSC stereo could be found */
+#define V4L2_STD_MTS (V4L2_STD_NTSC_M |\
+ V4L2_STD_PAL_M |\
+ V4L2_STD_PAL_N |\
+ V4L2_STD_PAL_Nc)
+
+/* Standards for Countries with 60Hz Line frequency */
+#define V4L2_STD_525_60 (V4L2_STD_PAL_M |\
+ V4L2_STD_PAL_60 |\
+ V4L2_STD_NTSC |\
+ V4L2_STD_NTSC_443)
+/* Standards for Countries with 50Hz Line frequency */
+#define V4L2_STD_625_50 (V4L2_STD_PAL |\
+ V4L2_STD_PAL_N |\
+ V4L2_STD_PAL_Nc |\
+ V4L2_STD_SECAM)
+
+#define V4L2_STD_ATSC (V4L2_STD_ATSC_8_VSB |\
+ V4L2_STD_ATSC_16_VSB)
+/* Macros with none and all analog standards */
+#define V4L2_STD_UNKNOWN 0
+#define V4L2_STD_ALL (V4L2_STD_525_60 |\
+ V4L2_STD_625_50)
+
+struct v4l2_standard {
+ __u32 index;
+ v4l2_std_id id;
+ __u8 name[24];
+ struct v4l2_fract frameperiod; /* Frames, not fields */
+ __u32 framelines;
+ __u32 reserved[4];
+};
+
+/* The DV Preset API is deprecated in favor of the DV Timings API.
+ New drivers shouldn't use this anymore! */
+
+/*
+ * V I D E O T I M I N G S D V P R E S E T
+ */
+struct v4l2_dv_preset {
+ __u32 preset;
+ __u32 reserved[4];
+};
+
+/*
+ * D V P R E S E T S E N U M E R A T I O N
+ */
+struct v4l2_dv_enum_preset {
+ __u32 index;
+ __u32 preset;
+ __u8 name[32]; /* Name of the preset timing */
+ __u32 width;
+ __u32 height;
+ __u32 reserved[4];
+};
+
+/*
+ * D V P R E S E T V A L U E S
+ */
+#define V4L2_DV_INVALID 0
+#define V4L2_DV_480P59_94 1 /* BT.1362 */
+#define V4L2_DV_576P50 2 /* BT.1362 */
+#define V4L2_DV_720P24 3 /* SMPTE 296M */
+#define V4L2_DV_720P25 4 /* SMPTE 296M */
+#define V4L2_DV_720P30 5 /* SMPTE 296M */
+#define V4L2_DV_720P50 6 /* SMPTE 296M */
+#define V4L2_DV_720P59_94 7 /* SMPTE 274M */
+#define V4L2_DV_720P60 8 /* SMPTE 274M/296M */
+#define V4L2_DV_1080I29_97 9 /* BT.1120/ SMPTE 274M */
+#define V4L2_DV_1080I30 10 /* BT.1120/ SMPTE 274M */
+#define V4L2_DV_1080I25 11 /* BT.1120 */
+#define V4L2_DV_1080I50 12 /* SMPTE 296M */
+#define V4L2_DV_1080I60 13 /* SMPTE 296M */
+#define V4L2_DV_1080P24 14 /* SMPTE 296M */
+#define V4L2_DV_1080P25 15 /* SMPTE 296M */
+#define V4L2_DV_1080P30 16 /* SMPTE 296M */
+#define V4L2_DV_1080P50 17 /* BT.1120 */
+#define V4L2_DV_1080P60 18 /* BT.1120 */
+
+/*
+ * D V B T T I M I N G S
+ */
+
+/** struct v4l2_bt_timings - BT.656/BT.1120 timing data
+ * @width: total width of the active video in pixels
+ * @height: total height of the active video in lines
+ * @interlaced: Interlaced or progressive
+ * @polarities: Positive or negative polarities
+ * @pixelclock: Pixel clock in HZ. Ex. 74.25MHz->74250000
+ * @hfrontporch:Horizontal front porch in pixels
+ * @hsync: Horizontal Sync length in pixels
+ * @hbackporch: Horizontal back porch in pixels
+ * @vfrontporch:Vertical front porch in lines
+ * @vsync: Vertical Sync length in lines
+ * @vbackporch: Vertical back porch in lines
+ * @il_vfrontporch:Vertical front porch for the even field
+ * (aka field 2) of interlaced field formats
+ * @il_vsync: Vertical Sync length for the even field
+ * (aka field 2) of interlaced field formats
+ * @il_vbackporch:Vertical back porch for the even field
+ * (aka field 2) of interlaced field formats
+ * @standards: Standards the timing belongs to
+ * @flags: Flags
+ * @reserved: Reserved fields, must be zeroed.
+ *
+ * A note regarding vertical interlaced timings: height refers to the total
+ * height of the active video frame (= two fields). The blanking timings refer
+ * to the blanking of each field. So the height of the total frame is
+ * calculated as follows:
+ *
+ * tot_height = height + vfrontporch + vsync + vbackporch +
+ * il_vfrontporch + il_vsync + il_vbackporch
+ *
+ * The active height of each field is height / 2.
+ */
+struct v4l2_bt_timings {
+ __u32 width;
+ __u32 height;
+ __u32 interlaced;
+ __u32 polarities;
+ __u64 pixelclock;
+ __u32 hfrontporch;
+ __u32 hsync;
+ __u32 hbackporch;
+ __u32 vfrontporch;
+ __u32 vsync;
+ __u32 vbackporch;
+ __u32 il_vfrontporch;
+ __u32 il_vsync;
+ __u32 il_vbackporch;
+ __u32 standards;
+ __u32 flags;
+ __u32 reserved[14];
+} __attribute__ ((packed));
+
+/* Interlaced or progressive format */
+#define V4L2_DV_PROGRESSIVE 0
+#define V4L2_DV_INTERLACED 1
+
+/* Polarities. If bit is not set, it is assumed to be negative polarity */
+#define V4L2_DV_VSYNC_POS_POL 0x00000001
+#define V4L2_DV_HSYNC_POS_POL 0x00000002
+
+/* Timings standards */
+#define V4L2_DV_BT_STD_CEA861 (1 << 0) /* CEA-861 Digital TV Profile */
+#define V4L2_DV_BT_STD_DMT (1 << 1) /* VESA Discrete Monitor Timings */
+#define V4L2_DV_BT_STD_CVT (1 << 2) /* VESA Coordinated Video Timings */
+#define V4L2_DV_BT_STD_GTF (1 << 3) /* VESA Generalized Timings Formula */
+
+/* Flags */
+
+/* CVT/GTF specific: timing uses reduced blanking (CVT) or the 'Secondary
+ GTF' curve (GTF). In both cases the horizontal and/or vertical blanking
+ intervals are reduced, allowing a higher resolution over the same
+ bandwidth. This is a read-only flag. */
+#define V4L2_DV_FL_REDUCED_BLANKING (1 << 0)
+/* CEA-861 specific: set for CEA-861 formats with a framerate of a multiple
+ of six. These formats can be optionally played at 1 / 1.001 speed.
+ This is a read-only flag. */
+#define V4L2_DV_FL_CAN_REDUCE_FPS (1 << 1)
+/* CEA-861 specific: only valid for video transmitters, the flag is cleared
+ by receivers.
+ If the framerate of the format is a multiple of six, then the pixelclock
+ used to set up the transmitter is divided by 1.001 to make it compatible
+ with 60 Hz based standards such as NTSC and PAL-M that use a framerate of
+ 29.97 Hz. Otherwise this flag is cleared. If the transmitter can't generate
+ such frequencies, then the flag will also be cleared. */
+#define V4L2_DV_FL_REDUCED_FPS (1 << 2)
+/* Specific to interlaced formats: if set, then field 1 is really one half-line
+ longer and field 2 is really one half-line shorter, so each field has
+ exactly the same number of half-lines. Whether half-lines can be detected
+ or used depends on the hardware. */
+#define V4L2_DV_FL_HALF_LINE (1 << 0)
+
+
+/** struct v4l2_dv_timings - DV timings
+ * @type: the type of the timings
+ * @bt: BT656/1120 timings
+ */
+struct v4l2_dv_timings {
+ __u32 type;
+ union {
+ struct v4l2_bt_timings bt;
+ __u32 reserved[32];
+ };
+} __attribute__ ((packed));
+
+/* Values for the type field */
+#define V4L2_DV_BT_656_1120 0 /* BT.656/1120 timing type */
+
+
+/** struct v4l2_enum_dv_timings - DV timings enumeration
+ * @index: enumeration index
+ * @reserved: must be zeroed
+ * @timings: the timings for the given index
+ */
+struct v4l2_enum_dv_timings {
+ __u32 index;
+ __u32 reserved[3];
+ struct v4l2_dv_timings timings;
+};
+
+/** struct v4l2_bt_timings_cap - BT.656/BT.1120 timing capabilities
+ * @min_width: width in pixels
+ * @max_width: width in pixels
+ * @min_height: height in lines
+ * @max_height: height in lines
+ * @min_pixelclock: Pixel clock in HZ. Ex. 74.25MHz->74250000
+ * @max_pixelclock: Pixel clock in HZ. Ex. 74.25MHz->74250000
+ * @standards: Supported standards
+ * @capabilities: Supported capabilities
+ * @reserved: Must be zeroed
+ */
+struct v4l2_bt_timings_cap {
+ __u32 min_width;
+ __u32 max_width;
+ __u32 min_height;
+ __u32 max_height;
+ __u64 min_pixelclock;
+ __u64 max_pixelclock;
+ __u32 standards;
+ __u32 capabilities;
+ __u32 reserved[16];
+} __attribute__ ((packed));
+
+/* Supports interlaced formats */
+#define V4L2_DV_BT_CAP_INTERLACED (1 << 0)
+/* Supports progressive formats */
+#define V4L2_DV_BT_CAP_PROGRESSIVE (1 << 1)
+/* Supports CVT/GTF reduced blanking */
+#define V4L2_DV_BT_CAP_REDUCED_BLANKING (1 << 2)
+/* Supports custom formats */
+#define V4L2_DV_BT_CAP_CUSTOM (1 << 3)
+
+/** struct v4l2_dv_timings_cap - DV timings capabilities
+ * @type: the type of the timings (same as in struct v4l2_dv_timings)
+ * @bt: the BT656/1120 timings capabilities
+ */
+struct v4l2_dv_timings_cap {
+ __u32 type;
+ __u32 reserved[3];
+ union {
+ struct v4l2_bt_timings_cap bt;
+ __u32 raw_data[32];
+ };
+};
+
+
+/*
+ * V I D E O I N P U T S
+ */
+struct v4l2_input {
+ __u32 index; /* Which input */
+ __u8 name[32]; /* Label */
+ __u32 type; /* Type of input */
+ __u32 audioset; /* Associated audios (bitfield) */
+ __u32 tuner; /* enum v4l2_tuner_type */
+ v4l2_std_id std;
+ __u32 status;
+ __u32 capabilities;
+ __u32 reserved[3];
+};
+
+/* Values for the 'type' field */
+#define V4L2_INPUT_TYPE_TUNER 1
+#define V4L2_INPUT_TYPE_CAMERA 2
+
+/* field 'status' - general */
+#define V4L2_IN_ST_NO_POWER 0x00000001 /* Attached device is off */
+#define V4L2_IN_ST_NO_SIGNAL 0x00000002
+#define V4L2_IN_ST_NO_COLOR 0x00000004
+
+/* field 'status' - sensor orientation */
+/* If sensor is mounted upside down set both bits */
+#define V4L2_IN_ST_HFLIP 0x00000010 /* Frames are flipped horizontally */
+#define V4L2_IN_ST_VFLIP 0x00000020 /* Frames are flipped vertically */
+
+/* field 'status' - analog */
+#define V4L2_IN_ST_NO_H_LOCK 0x00000100 /* No horizontal sync lock */
+#define V4L2_IN_ST_COLOR_KILL 0x00000200 /* Color killer is active */
+
+/* field 'status' - digital */
+#define V4L2_IN_ST_NO_SYNC 0x00010000 /* No synchronization lock */
+#define V4L2_IN_ST_NO_EQU 0x00020000 /* No equalizer lock */
+#define V4L2_IN_ST_NO_CARRIER 0x00040000 /* Carrier recovery failed */
+
+/* field 'status' - VCR and set-top box */
+#define V4L2_IN_ST_MACROVISION 0x01000000 /* Macrovision detected */
+#define V4L2_IN_ST_NO_ACCESS 0x02000000 /* Conditional access denied */
+#define V4L2_IN_ST_VTR 0x04000000 /* VTR time constant */
+
+/* capabilities flags */
+#define V4L2_IN_CAP_PRESETS 0x00000001 /* Supports S_DV_PRESET */
+#define V4L2_IN_CAP_DV_TIMINGS 0x00000002 /* Supports S_DV_TIMINGS */
+#define V4L2_IN_CAP_CUSTOM_TIMINGS V4L2_IN_CAP_DV_TIMINGS /* For compatibility */
+#define V4L2_IN_CAP_STD 0x00000004 /* Supports S_STD */
+
+/*
+ * V I D E O O U T P U T S
+ */
+struct v4l2_output {
+ __u32 index; /* Which output */
+ __u8 name[32]; /* Label */
+ __u32 type; /* Type of output */
+ __u32 audioset; /* Associated audios (bitfield) */
+ __u32 modulator; /* Associated modulator */
+ v4l2_std_id std;
+ __u32 capabilities;
+ __u32 reserved[3];
+};
+/* Values for the 'type' field */
+#define V4L2_OUTPUT_TYPE_MODULATOR 1
+#define V4L2_OUTPUT_TYPE_ANALOG 2
+#define V4L2_OUTPUT_TYPE_ANALOGVGAOVERLAY 3
+
+/* capabilities flags */
+#define V4L2_OUT_CAP_PRESETS 0x00000001 /* Supports S_DV_PRESET */
+#define V4L2_OUT_CAP_DV_TIMINGS 0x00000002 /* Supports S_DV_TIMINGS */
+#define V4L2_OUT_CAP_CUSTOM_TIMINGS V4L2_OUT_CAP_DV_TIMINGS /* For compatibility */
+#define V4L2_OUT_CAP_STD 0x00000004 /* Supports S_STD */
+
+/*
+ * C O N T R O L S
+ */
+struct v4l2_control {
+ __u32 id;
+ __s32 value;
+};
+
+struct v4l2_ext_control {
+ __u32 id;
+ __u32 size;
+ __u32 reserved2[1];
+ union {
+ __s32 value;
+ __s64 value64;
+ char *string;
+ };
+} __attribute__ ((packed));
+
+struct v4l2_ext_controls {
+ __u32 ctrl_class;
+ __u32 count;
+ __u32 error_idx;
+ __u32 reserved[2];
+ struct v4l2_ext_control *controls;
+};
+
+#define V4L2_CTRL_ID_MASK (0x0fffffff)
+#define V4L2_CTRL_ID2CLASS(id) ((id) & 0x0fff0000UL)
+#define V4L2_CTRL_DRIVER_PRIV(id) (((id) & 0xffff) >= 0x1000)
+
+enum v4l2_ctrl_type {
+ V4L2_CTRL_TYPE_INTEGER = 1,
+ V4L2_CTRL_TYPE_BOOLEAN = 2,
+ V4L2_CTRL_TYPE_MENU = 3,
+ V4L2_CTRL_TYPE_BUTTON = 4,
+ V4L2_CTRL_TYPE_INTEGER64 = 5,
+ V4L2_CTRL_TYPE_CTRL_CLASS = 6,
+ V4L2_CTRL_TYPE_STRING = 7,
+ V4L2_CTRL_TYPE_BITMASK = 8,
+ V4L2_CTRL_TYPE_INTEGER_MENU = 9,
+};
+
+/* Used in the VIDIOC_QUERYCTRL ioctl for querying controls */
+struct v4l2_queryctrl {
+ __u32 id;
+ __u32 type; /* enum v4l2_ctrl_type */
+ __u8 name[32]; /* Whatever */
+ __s32 minimum; /* Note signedness */
+ __s32 maximum;
+ __s32 step;
+ __s32 default_value;
+ __u32 flags;
+ __u32 reserved[2];
+};
+
+/* Used in the VIDIOC_QUERYMENU ioctl for querying menu items */
+struct v4l2_querymenu {
+ __u32 id;
+ __u32 index;
+ union {
+ __u8 name[32]; /* Whatever */
+ __s64 value;
+ };
+ __u32 reserved;
+} __attribute__ ((packed));
+
+/* Control flags */
+#define V4L2_CTRL_FLAG_DISABLED 0x0001
+#define V4L2_CTRL_FLAG_GRABBED 0x0002
+#define V4L2_CTRL_FLAG_READ_ONLY 0x0004
+#define V4L2_CTRL_FLAG_UPDATE 0x0008
+#define V4L2_CTRL_FLAG_INACTIVE 0x0010
+#define V4L2_CTRL_FLAG_SLIDER 0x0020
+#define V4L2_CTRL_FLAG_WRITE_ONLY 0x0040
+#define V4L2_CTRL_FLAG_VOLATILE 0x0080
+
+/* Query flag, to be ORed with the control ID */
+#define V4L2_CTRL_FLAG_NEXT_CTRL 0x80000000
+
+/* User-class control IDs defined by V4L2 */
+#define V4L2_CID_MAX_CTRLS 1024
+/* IDs reserved for driver specific controls */
+#define V4L2_CID_PRIVATE_BASE 0x08000000
+
+
+/* DV-class control IDs defined by V4L2 */
+#define V4L2_CID_DV_CLASS_BASE (V4L2_CTRL_CLASS_DV | 0x900)
+#define V4L2_CID_DV_CLASS (V4L2_CTRL_CLASS_DV | 1)
+
+#define V4L2_CID_DV_TX_HOTPLUG (V4L2_CID_DV_CLASS_BASE + 1)
+#define V4L2_CID_DV_TX_RXSENSE (V4L2_CID_DV_CLASS_BASE + 2)
+#define V4L2_CID_DV_TX_EDID_PRESENT (V4L2_CID_DV_CLASS_BASE + 3)
+#define V4L2_CID_DV_TX_MODE (V4L2_CID_DV_CLASS_BASE + 4)
+enum v4l2_dv_tx_mode {
+ V4L2_DV_TX_MODE_DVI_D = 0,
+ V4L2_DV_TX_MODE_HDMI = 1,
+};
+#define V4L2_CID_DV_TX_RGB_RANGE (V4L2_CID_DV_CLASS_BASE + 5)
+enum v4l2_dv_rgb_range {
+ V4L2_DV_RGB_RANGE_AUTO = 0,
+ V4L2_DV_RGB_RANGE_LIMITED = 1,
+ V4L2_DV_RGB_RANGE_FULL = 2,
+};
+
+#define V4L2_CID_DV_RX_POWER_PRESENT (V4L2_CID_DV_CLASS_BASE + 100)
+#define V4L2_CID_DV_RX_RGB_RANGE (V4L2_CID_DV_CLASS_BASE + 101)
+
+/*
+ * T U N I N G
+ */
+struct v4l2_tuner {
+ __u32 index;
+ __u8 name[32];
+ __u32 type; /* enum v4l2_tuner_type */
+ __u32 capability;
+ __u32 rangelow;
+ __u32 rangehigh;
+ __u32 rxsubchans;
+ __u32 audmode;
+ __s32 signal;
+ __s32 afc;
+ __u32 reserved[4];
+};
+
+struct v4l2_modulator {
+ __u32 index;
+ __u8 name[32];
+ __u32 capability;
+ __u32 rangelow;
+ __u32 rangehigh;
+ __u32 txsubchans;
+ __u32 reserved[4];
+};
+
+/* Flags for the 'capability' field */
+#define V4L2_TUNER_CAP_LOW 0x0001
+#define V4L2_TUNER_CAP_NORM 0x0002
+#define V4L2_TUNER_CAP_HWSEEK_BOUNDED 0x0004
+#define V4L2_TUNER_CAP_HWSEEK_WRAP 0x0008
+#define V4L2_TUNER_CAP_STEREO 0x0010
+#define V4L2_TUNER_CAP_LANG2 0x0020
+#define V4L2_TUNER_CAP_SAP 0x0020
+#define V4L2_TUNER_CAP_LANG1 0x0040
+#define V4L2_TUNER_CAP_RDS 0x0080
+#define V4L2_TUNER_CAP_RDS_BLOCK_IO 0x0100
+#define V4L2_TUNER_CAP_RDS_CONTROLS 0x0200
+#define V4L2_TUNER_CAP_FREQ_BANDS 0x0400
+#define V4L2_TUNER_CAP_HWSEEK_PROG_LIM 0x0800
+
+/* Flags for the 'rxsubchans' field */
+#define V4L2_TUNER_SUB_MONO 0x0001
+#define V4L2_TUNER_SUB_STEREO 0x0002
+#define V4L2_TUNER_SUB_LANG2 0x0004
+#define V4L2_TUNER_SUB_SAP 0x0004
+#define V4L2_TUNER_SUB_LANG1 0x0008
+#define V4L2_TUNER_SUB_RDS 0x0010
+
+/* Values for the 'audmode' field */
+#define V4L2_TUNER_MODE_MONO 0x0000
+#define V4L2_TUNER_MODE_STEREO 0x0001
+#define V4L2_TUNER_MODE_LANG2 0x0002
+#define V4L2_TUNER_MODE_SAP 0x0002
+#define V4L2_TUNER_MODE_LANG1 0x0003
+#define V4L2_TUNER_MODE_LANG1_LANG2 0x0004
+
+struct v4l2_frequency {
+ __u32 tuner;
+ __u32 type; /* enum v4l2_tuner_type */
+ __u32 frequency;
+ __u32 reserved[8];
+};
+
+#define V4L2_BAND_MODULATION_VSB (1 << 1)
+#define V4L2_BAND_MODULATION_FM (1 << 2)
+#define V4L2_BAND_MODULATION_AM (1 << 3)
+
+struct v4l2_frequency_band {
+ __u32 tuner;
+ __u32 type; /* enum v4l2_tuner_type */
+ __u32 index;
+ __u32 capability;
+ __u32 rangelow;
+ __u32 rangehigh;
+ __u32 modulation;
+ __u32 reserved[9];
+};
+
+struct v4l2_hw_freq_seek {
+ __u32 tuner;
+ __u32 type; /* enum v4l2_tuner_type */
+ __u32 seek_upward;
+ __u32 wrap_around;
+ __u32 spacing;
+ __u32 rangelow;
+ __u32 rangehigh;
+ __u32 reserved[5];
+};
+
+/*
+ * R D S
+ */
+
+struct v4l2_rds_data {
+ __u8 lsb;
+ __u8 msb;
+ __u8 block;
+} __attribute__ ((packed));
+
+#define V4L2_RDS_BLOCK_MSK 0x7
+#define V4L2_RDS_BLOCK_A 0
+#define V4L2_RDS_BLOCK_B 1
+#define V4L2_RDS_BLOCK_C 2
+#define V4L2_RDS_BLOCK_D 3
+#define V4L2_RDS_BLOCK_C_ALT 4
+#define V4L2_RDS_BLOCK_INVALID 7
+
+#define V4L2_RDS_BLOCK_CORRECTED 0x40
+#define V4L2_RDS_BLOCK_ERROR 0x80
+
+/*
+ * A U D I O
+ */
+struct v4l2_audio {
+ __u32 index;
+ __u8 name[32];
+ __u32 capability;
+ __u32 mode;
+ __u32 reserved[2];
+};
+
+/* Flags for the 'capability' field */
+#define V4L2_AUDCAP_STEREO 0x00001
+#define V4L2_AUDCAP_AVL 0x00002
+
+/* Flags for the 'mode' field */
+#define V4L2_AUDMODE_AVL 0x00001
+
+struct v4l2_audioout {
+ __u32 index;
+ __u8 name[32];
+ __u32 capability;
+ __u32 mode;
+ __u32 reserved[2];
+};
+
+/*
+ * M P E G S E R V I C E S
+ *
+ * NOTE: EXPERIMENTAL API
+ */
+#if 1
+#define V4L2_ENC_IDX_FRAME_I (0)
+#define V4L2_ENC_IDX_FRAME_P (1)
+#define V4L2_ENC_IDX_FRAME_B (2)
+#define V4L2_ENC_IDX_FRAME_MASK (0xf)
+
+struct v4l2_enc_idx_entry {
+ __u64 offset;
+ __u64 pts;
+ __u32 length;
+ __u32 flags;
+ __u32 reserved[2];
+};
+
+#define V4L2_ENC_IDX_ENTRIES (64)
+struct v4l2_enc_idx {
+ __u32 entries;
+ __u32 entries_cap;
+ __u32 reserved[4];
+ struct v4l2_enc_idx_entry entry[V4L2_ENC_IDX_ENTRIES];
+};
+
+
+#define V4L2_ENC_CMD_START (0)
+#define V4L2_ENC_CMD_STOP (1)
+#define V4L2_ENC_CMD_PAUSE (2)
+#define V4L2_ENC_CMD_RESUME (3)
+
+/* Flags for V4L2_ENC_CMD_STOP */
+#define V4L2_ENC_CMD_STOP_AT_GOP_END (1 << 0)
+
+struct v4l2_encoder_cmd {
+ __u32 cmd;
+ __u32 flags;
+ union {
+ struct {
+ __u32 data[8];
+ } raw;
+ };
+};
+
+/* Decoder commands */
+#define V4L2_DEC_CMD_START (0)
+#define V4L2_DEC_CMD_STOP (1)
+#define V4L2_DEC_CMD_PAUSE (2)
+#define V4L2_DEC_CMD_RESUME (3)
+
+/* Flags for V4L2_DEC_CMD_START */
+#define V4L2_DEC_CMD_START_MUTE_AUDIO (1 << 0)
+
+/* Flags for V4L2_DEC_CMD_PAUSE */
+#define V4L2_DEC_CMD_PAUSE_TO_BLACK (1 << 0)
+
+/* Flags for V4L2_DEC_CMD_STOP */
+#define V4L2_DEC_CMD_STOP_TO_BLACK (1 << 0)
+#define V4L2_DEC_CMD_STOP_IMMEDIATELY (1 << 1)
+
+/* Play format requirements (returned by the driver): */
+
+/* The decoder has no special format requirements */
+#define V4L2_DEC_START_FMT_NONE (0)
+/* The decoder requires full GOPs */
+#define V4L2_DEC_START_FMT_GOP (1)
+
+/* The structure must be zeroed before use by the application
+ This ensures it can be extended safely in the future. */
+struct v4l2_decoder_cmd {
+ __u32 cmd;
+ __u32 flags;
+ union {
+ struct {
+ __u64 pts;
+ } stop;
+
+ struct {
+ /* 0 or 1000 specifies normal speed,
+ 1 specifies forward single stepping,
+ -1 specifies backward single stepping,
+ >1: playback at speed/1000 of the normal speed,
+ <-1: reverse playback at (-speed/1000) of the normal speed. */
+ __s32 speed;
+ __u32 format;
+ } start;
+
+ struct {
+ __u32 data[16];
+ } raw;
+ };
+};
+#endif
+
+
+/*
+ * D A T A S E R V I C E S ( V B I )
+ *
+ * Data services API by Michael Schimek
+ */
+
+/* Raw VBI */
+struct v4l2_vbi_format {
+ __u32 sampling_rate; /* in 1 Hz */
+ __u32 offset;
+ __u32 samples_per_line;
+ __u32 sample_format; /* V4L2_PIX_FMT_* */
+ __s32 start[2];
+ __u32 count[2];
+ __u32 flags; /* V4L2_VBI_* */
+ __u32 reserved[2]; /* must be zero */
+};
+
+/* VBI flags */
+#define V4L2_VBI_UNSYNC (1 << 0)
+#define V4L2_VBI_INTERLACED (1 << 1)
+
+/* Sliced VBI
+ *
+ * This implements is a proposal V4L2 API to allow SLICED VBI
+ * required for some hardware encoders. It should change without
+ * notice in the definitive implementation.
+ */
+
+struct v4l2_sliced_vbi_format {
+ __u16 service_set;
+ /* service_lines[0][...] specifies lines 0-23 (1-23 used) of the first field
+ service_lines[1][...] specifies lines 0-23 (1-23 used) of the second field
+ (equals frame lines 313-336 for 625 line video
+ standards, 263-286 for 525 line standards) */
+ __u16 service_lines[2][24];
+ __u32 io_size;
+ __u32 reserved[2]; /* must be zero */
+};
+
+/* Teletext World System Teletext
+ (WST), defined on ITU-R BT.653-2 */
+#define V4L2_SLICED_TELETEXT_B (0x0001)
+/* Video Program System, defined on ETS 300 231*/
+#define V4L2_SLICED_VPS (0x0400)
+/* Closed Caption, defined on EIA-608 */
+#define V4L2_SLICED_CAPTION_525 (0x1000)
+/* Wide Screen System, defined on ITU-R BT1119.1 */
+#define V4L2_SLICED_WSS_625 (0x4000)
+
+#define V4L2_SLICED_VBI_525 (V4L2_SLICED_CAPTION_525)
+#define V4L2_SLICED_VBI_625 (V4L2_SLICED_TELETEXT_B | V4L2_SLICED_VPS | V4L2_SLICED_WSS_625)
+
+struct v4l2_sliced_vbi_cap {
+ __u16 service_set;
+ /* service_lines[0][...] specifies lines 0-23 (1-23 used) of the first field
+ service_lines[1][...] specifies lines 0-23 (1-23 used) of the second field
+ (equals frame lines 313-336 for 625 line video
+ standards, 263-286 for 525 line standards) */
+ __u16 service_lines[2][24];
+ __u32 type; /* enum v4l2_buf_type */
+ __u32 reserved[3]; /* must be 0 */
+};
+
+struct v4l2_sliced_vbi_data {
+ __u32 id;
+ __u32 field; /* 0: first field, 1: second field */
+ __u32 line; /* 1-23 */
+ __u32 reserved; /* must be 0 */
+ __u8 data[48];
+};
+
+/*
+ * Sliced VBI data inserted into MPEG Streams
+ */
+
+/*
+ * V4L2_MPEG_STREAM_VBI_FMT_IVTV:
+ *
+ * Structure of payload contained in an MPEG 2 Private Stream 1 PES Packet in an
+ * MPEG-2 Program Pack that contains V4L2_MPEG_STREAM_VBI_FMT_IVTV Sliced VBI
+ * data
+ *
+ * Note, the MPEG-2 Program Pack and Private Stream 1 PES packet header
+ * definitions are not included here. See the MPEG-2 specifications for details
+ * on these headers.
+ */
+
+/* Line type IDs */
+#define V4L2_MPEG_VBI_IVTV_TELETEXT_B (1)
+#define V4L2_MPEG_VBI_IVTV_CAPTION_525 (4)
+#define V4L2_MPEG_VBI_IVTV_WSS_625 (5)
+#define V4L2_MPEG_VBI_IVTV_VPS (7)
+
+struct v4l2_mpeg_vbi_itv0_line {
+ __u8 id; /* One of V4L2_MPEG_VBI_IVTV_* above */
+ __u8 data[42]; /* Sliced VBI data for the line */
+} __attribute__ ((packed));
+
+struct v4l2_mpeg_vbi_itv0 {
+ __le32 linemask[2]; /* Bitmasks of VBI service lines present */
+ struct v4l2_mpeg_vbi_itv0_line line[35];
+} __attribute__ ((packed));
+
+struct v4l2_mpeg_vbi_ITV0 {
+ struct v4l2_mpeg_vbi_itv0_line line[36];
+} __attribute__ ((packed));
+
+#define V4L2_MPEG_VBI_IVTV_MAGIC0 "itv0"
+#define V4L2_MPEG_VBI_IVTV_MAGIC1 "ITV0"
+
+struct v4l2_mpeg_vbi_fmt_ivtv {
+ __u8 magic[4];
+ union {
+ struct v4l2_mpeg_vbi_itv0 itv0;
+ struct v4l2_mpeg_vbi_ITV0 ITV0;
+ };
+} __attribute__ ((packed));
+
+/*
+ * A G G R E G A T E S T R U C T U R E S
+ */
+
+/**
+ * struct v4l2_plane_pix_format - additional, per-plane format definition
+ * @sizeimage: maximum size in bytes required for data, for which
+ * this plane will be used
+ * @bytesperline: distance in bytes between the leftmost pixels in two
+ * adjacent lines
+ */
+struct v4l2_plane_pix_format {
+ __u32 sizeimage;
+ __u16 bytesperline;
+ __u16 reserved[7];
+} __attribute__ ((packed));
+
+/**
+ * struct v4l2_pix_format_mplane - multiplanar format definition
+ * @width: image width in pixels
+ * @height: image height in pixels
+ * @pixelformat: little endian four character code (fourcc)
+ * @field: enum v4l2_field; field order (for interlaced video)
+ * @colorspace: enum v4l2_colorspace; supplemental to pixelformat
+ * @plane_fmt: per-plane information
+ * @num_planes: number of planes for this format
+ */
+struct v4l2_pix_format_mplane {
+ __u32 width;
+ __u32 height;
+ __u32 pixelformat;
+ __u32 field;
+ __u32 colorspace;
+
+ struct v4l2_plane_pix_format plane_fmt[VIDEO_MAX_PLANES];
+ __u8 num_planes;
+ __u8 reserved[11];
+} __attribute__ ((packed));
+
+/**
+ * struct v4l2_format - stream data format
+ * @type: enum v4l2_buf_type; type of the data stream
+ * @pix: definition of an image format
+ * @pix_mp: definition of a multiplanar image format
+ * @win: definition of an overlaid image
+ * @vbi: raw VBI capture or output parameters
+ * @sliced: sliced VBI capture or output parameters
+ * @raw_data: placeholder for future extensions and custom formats
+ */
+struct v4l2_format {
+ __u32 type;
+ union {
+ struct v4l2_pix_format pix; /* V4L2_BUF_TYPE_VIDEO_CAPTURE */
+ struct v4l2_pix_format_mplane pix_mp; /* V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE */
+ struct v4l2_window win; /* V4L2_BUF_TYPE_VIDEO_OVERLAY */
+ struct v4l2_vbi_format vbi; /* V4L2_BUF_TYPE_VBI_CAPTURE */
+ struct v4l2_sliced_vbi_format sliced; /* V4L2_BUF_TYPE_SLICED_VBI_CAPTURE */
+ __u8 raw_data[200]; /* user-defined */
+ } fmt;
+};
+
+/* Stream type-dependent parameters
+ */
+struct v4l2_streamparm {
+ __u32 type; /* enum v4l2_buf_type */
+ union {
+ struct v4l2_captureparm capture;
+ struct v4l2_outputparm output;
+ __u8 raw_data[200]; /* user-defined */
+ } parm;
+};
+
+/*
+ * E V E N T S
+ */
+
+#define V4L2_EVENT_ALL 0
+#define V4L2_EVENT_VSYNC 1
+#define V4L2_EVENT_EOS 2
+#define V4L2_EVENT_CTRL 3
+#define V4L2_EVENT_FRAME_SYNC 4
+#define V4L2_EVENT_PRIVATE_START 0x08000000
+
+/* Payload for V4L2_EVENT_VSYNC */
+struct v4l2_event_vsync {
+ /* Can be V4L2_FIELD_ANY, _NONE, _TOP or _BOTTOM */
+ __u8 field;
+} __attribute__ ((packed));
+
+/* Payload for V4L2_EVENT_CTRL */
+#define V4L2_EVENT_CTRL_CH_VALUE (1 << 0)
+#define V4L2_EVENT_CTRL_CH_FLAGS (1 << 1)
+
+struct v4l2_event_ctrl {
+ __u32 changes;
+ __u32 type;
+ union {
+ __s32 value;
+ __s64 value64;
+ };
+ __u32 flags;
+ __s32 minimum;
+ __s32 maximum;
+ __s32 step;
+ __s32 default_value;
+};
+
+struct v4l2_event_frame_sync {
+ __u32 frame_sequence;
+};
+
+struct v4l2_event {
+ __u32 type;
+ union {
+ struct v4l2_event_vsync vsync;
+ struct v4l2_event_ctrl ctrl;
+ struct v4l2_event_frame_sync frame_sync;
+ __u8 data[64];
+ } u;
+ __u32 pending;
+ __u32 sequence;
+ struct timespec timestamp;
+ __u32 id;
+ __u32 reserved[8];
+};
+
+#define V4L2_EVENT_SUB_FL_SEND_INITIAL (1 << 0)
+#define V4L2_EVENT_SUB_FL_ALLOW_FEEDBACK (1 << 1)
+
+struct v4l2_event_subscription {
+ __u32 type;
+ __u32 id;
+ __u32 flags;
+ __u32 reserved[5];
+};
+
+/*
+ * A D V A N C E D D E B U G G I N G
+ *
+ * NOTE: EXPERIMENTAL API, NEVER RELY ON THIS IN APPLICATIONS!
+ * FOR DEBUGGING, TESTING AND INTERNAL USE ONLY!
+ */
+
+/* VIDIOC_DBG_G_REGISTER and VIDIOC_DBG_S_REGISTER */
+
+#define V4L2_CHIP_MATCH_HOST 0 /* Match against chip ID on host (0 for the host) */
+#define V4L2_CHIP_MATCH_I2C_DRIVER 1 /* Match against I2C driver name */
+#define V4L2_CHIP_MATCH_I2C_ADDR 2 /* Match against I2C 7-bit address */
+#define V4L2_CHIP_MATCH_AC97 3 /* Match against anciliary AC97 chip */
+
+struct v4l2_dbg_match {
+ __u32 type; /* Match type */
+ union { /* Match this chip, meaning determined by type */
+ __u32 addr;
+ char name[32];
+ };
+} __attribute__ ((packed));
+
+struct v4l2_dbg_register {
+ struct v4l2_dbg_match match;
+ __u32 size; /* register size in bytes */
+ __u64 reg;
+ __u64 val;
+} __attribute__ ((packed));
+
+/* VIDIOC_DBG_G_CHIP_IDENT */
+struct v4l2_dbg_chip_ident {
+ struct v4l2_dbg_match match;
+ __u32 ident; /* chip identifier as specified in <media/v4l2-chip-ident.h> */
+ __u32 revision; /* chip revision, chip specific */
+} __attribute__ ((packed));
+
+/**
+ * struct v4l2_create_buffers - VIDIOC_CREATE_BUFS argument
+ * @index: on return, index of the first created buffer
+ * @count: entry: number of requested buffers,
+ * return: number of created buffers
+ * @memory: enum v4l2_memory; buffer memory type
+ * @format: frame format, for which buffers are requested
+ * @reserved: future extensions
+ */
+struct v4l2_create_buffers {
+ __u32 index;
+ __u32 count;
+ __u32 memory;
+ struct v4l2_format format;
+ __u32 reserved[8];
+};
+
+/*
+ * I O C T L C O D E S F O R V I D E O D E V I C E S
+ *
+ */
+#define VIDIOC_QUERYCAP _IOR('V', 0, struct v4l2_capability)
+#define VIDIOC_RESERVED _IO('V', 1)
+#define VIDIOC_ENUM_FMT _IOWR('V', 2, struct v4l2_fmtdesc)
+#define VIDIOC_G_FMT _IOWR('V', 4, struct v4l2_format)
+#define VIDIOC_S_FMT _IOWR('V', 5, struct v4l2_format)
+#define VIDIOC_REQBUFS _IOWR('V', 8, struct v4l2_requestbuffers)
+#define VIDIOC_QUERYBUF _IOWR('V', 9, struct v4l2_buffer)
+#define VIDIOC_G_FBUF _IOR('V', 10, struct v4l2_framebuffer)
+#define VIDIOC_S_FBUF _IOW('V', 11, struct v4l2_framebuffer)
+#define VIDIOC_OVERLAY _IOW('V', 14, int)
+#define VIDIOC_QBUF _IOWR('V', 15, struct v4l2_buffer)
+#define VIDIOC_DQBUF _IOWR('V', 17, struct v4l2_buffer)
+#define VIDIOC_STREAMON _IOW('V', 18, int)
+#define VIDIOC_STREAMOFF _IOW('V', 19, int)
+#define VIDIOC_G_PARM _IOWR('V', 21, struct v4l2_streamparm)
+#define VIDIOC_S_PARM _IOWR('V', 22, struct v4l2_streamparm)
+#define VIDIOC_G_STD _IOR('V', 23, v4l2_std_id)
+#define VIDIOC_S_STD _IOW('V', 24, v4l2_std_id)
+#define VIDIOC_ENUMSTD _IOWR('V', 25, struct v4l2_standard)
+#define VIDIOC_ENUMINPUT _IOWR('V', 26, struct v4l2_input)
+#define VIDIOC_G_CTRL _IOWR('V', 27, struct v4l2_control)
+#define VIDIOC_S_CTRL _IOWR('V', 28, struct v4l2_control)
+#define VIDIOC_G_TUNER _IOWR('V', 29, struct v4l2_tuner)
+#define VIDIOC_S_TUNER _IOW('V', 30, struct v4l2_tuner)
+#define VIDIOC_G_AUDIO _IOR('V', 33, struct v4l2_audio)
+#define VIDIOC_S_AUDIO _IOW('V', 34, struct v4l2_audio)
+#define VIDIOC_QUERYCTRL _IOWR('V', 36, struct v4l2_queryctrl)
+#define VIDIOC_QUERYMENU _IOWR('V', 37, struct v4l2_querymenu)
+#define VIDIOC_G_INPUT _IOR('V', 38, int)
+#define VIDIOC_S_INPUT _IOWR('V', 39, int)
+#define VIDIOC_G_OUTPUT _IOR('V', 46, int)
+#define VIDIOC_S_OUTPUT _IOWR('V', 47, int)
+#define VIDIOC_ENUMOUTPUT _IOWR('V', 48, struct v4l2_output)
+#define VIDIOC_G_AUDOUT _IOR('V', 49, struct v4l2_audioout)
+#define VIDIOC_S_AUDOUT _IOW('V', 50, struct v4l2_audioout)
+#define VIDIOC_G_MODULATOR _IOWR('V', 54, struct v4l2_modulator)
+#define VIDIOC_S_MODULATOR _IOW('V', 55, struct v4l2_modulator)
+#define VIDIOC_G_FREQUENCY _IOWR('V', 56, struct v4l2_frequency)
+#define VIDIOC_S_FREQUENCY _IOW('V', 57, struct v4l2_frequency)
+#define VIDIOC_CROPCAP _IOWR('V', 58, struct v4l2_cropcap)
+#define VIDIOC_G_CROP _IOWR('V', 59, struct v4l2_crop)
+#define VIDIOC_S_CROP _IOW('V', 60, struct v4l2_crop)
+#define VIDIOC_G_JPEGCOMP _IOR('V', 61, struct v4l2_jpegcompression)
+#define VIDIOC_S_JPEGCOMP _IOW('V', 62, struct v4l2_jpegcompression)
+#define VIDIOC_QUERYSTD _IOR('V', 63, v4l2_std_id)
+#define VIDIOC_TRY_FMT _IOWR('V', 64, struct v4l2_format)
+#define VIDIOC_ENUMAUDIO _IOWR('V', 65, struct v4l2_audio)
+#define VIDIOC_ENUMAUDOUT _IOWR('V', 66, struct v4l2_audioout)
+#define VIDIOC_G_PRIORITY _IOR('V', 67, __u32) /* enum v4l2_priority */
+#define VIDIOC_S_PRIORITY _IOW('V', 68, __u32) /* enum v4l2_priority */
+#define VIDIOC_G_SLICED_VBI_CAP _IOWR('V', 69, struct v4l2_sliced_vbi_cap)
+#define VIDIOC_LOG_STATUS _IO('V', 70)
+#define VIDIOC_G_EXT_CTRLS _IOWR('V', 71, struct v4l2_ext_controls)
+#define VIDIOC_S_EXT_CTRLS _IOWR('V', 72, struct v4l2_ext_controls)
+#define VIDIOC_TRY_EXT_CTRLS _IOWR('V', 73, struct v4l2_ext_controls)
+#if 1
+#define VIDIOC_ENUM_FRAMESIZES _IOWR('V', 74, struct v4l2_frmsizeenum)
+#define VIDIOC_ENUM_FRAMEINTERVALS _IOWR('V', 75, struct v4l2_frmivalenum)
+#define VIDIOC_G_ENC_INDEX _IOR('V', 76, struct v4l2_enc_idx)
+#define VIDIOC_ENCODER_CMD _IOWR('V', 77, struct v4l2_encoder_cmd)
+#define VIDIOC_TRY_ENCODER_CMD _IOWR('V', 78, struct v4l2_encoder_cmd)
+#endif
+
+#if 1
+/* Experimental, meant for debugging, testing and internal use.
+ Only implemented if CONFIG_VIDEO_ADV_DEBUG is defined.
+ You must be root to use these ioctls. Never use these in applications! */
+#define VIDIOC_DBG_S_REGISTER _IOW('V', 79, struct v4l2_dbg_register)
+#define VIDIOC_DBG_G_REGISTER _IOWR('V', 80, struct v4l2_dbg_register)
+
+/* Experimental, meant for debugging, testing and internal use.
+ Never use this ioctl in applications! */
+#define VIDIOC_DBG_G_CHIP_IDENT _IOWR('V', 81, struct v4l2_dbg_chip_ident)
+#endif
+
+#define VIDIOC_S_HW_FREQ_SEEK _IOW('V', 82, struct v4l2_hw_freq_seek)
+
+/* These four DV Preset ioctls are deprecated in favor of the DV Timings
+ ioctls. */
+#define VIDIOC_ENUM_DV_PRESETS _IOWR('V', 83, struct v4l2_dv_enum_preset)
+#define VIDIOC_S_DV_PRESET _IOWR('V', 84, struct v4l2_dv_preset)
+#define VIDIOC_G_DV_PRESET _IOWR('V', 85, struct v4l2_dv_preset)
+#define VIDIOC_QUERY_DV_PRESET _IOR('V', 86, struct v4l2_dv_preset)
+#define VIDIOC_S_DV_TIMINGS _IOWR('V', 87, struct v4l2_dv_timings)
+#define VIDIOC_G_DV_TIMINGS _IOWR('V', 88, struct v4l2_dv_timings)
+#define VIDIOC_DQEVENT _IOR('V', 89, struct v4l2_event)
+#define VIDIOC_SUBSCRIBE_EVENT _IOW('V', 90, struct v4l2_event_subscription)
+#define VIDIOC_UNSUBSCRIBE_EVENT _IOW('V', 91, struct v4l2_event_subscription)
+
+/* Experimental, the below two ioctls may change over the next couple of kernel
+ versions */
+#define VIDIOC_CREATE_BUFS _IOWR('V', 92, struct v4l2_create_buffers)
+#define VIDIOC_PREPARE_BUF _IOWR('V', 93, struct v4l2_buffer)
+
+/* Experimental selection API */
+#define VIDIOC_G_SELECTION _IOWR('V', 94, struct v4l2_selection)
+#define VIDIOC_S_SELECTION _IOWR('V', 95, struct v4l2_selection)
+
+/* Experimental, these two ioctls may change over the next couple of kernel
+ versions. */
+#define VIDIOC_DECODER_CMD _IOWR('V', 96, struct v4l2_decoder_cmd)
+#define VIDIOC_TRY_DECODER_CMD _IOWR('V', 97, struct v4l2_decoder_cmd)
+
+/* Experimental, these three ioctls may change over the next couple of kernel
+ versions. */
+#define VIDIOC_ENUM_DV_TIMINGS _IOWR('V', 98, struct v4l2_enum_dv_timings)
+#define VIDIOC_QUERY_DV_TIMINGS _IOR('V', 99, struct v4l2_dv_timings)
+#define VIDIOC_DV_TIMINGS_CAP _IOWR('V', 100, struct v4l2_dv_timings_cap)
+
+/* Experimental, this ioctl may change over the next couple of kernel
+ versions. */
+#define VIDIOC_ENUM_FREQ_BANDS _IOWR('V', 101, struct v4l2_frequency_band)
+
+/* Reminder: when adding new ioctls please add support for them to
+ drivers/media/video/v4l2-compat-ioctl32.c as well! */
+
+#define BASE_VIDIOC_PRIVATE 192 /* 192-255 are private */
+
+#endif /* _UAPI__LINUX_VIDEODEV2_H */
diff --git a/include/linux/virtio_9p.h b/include/uapi/linux/virtio_9p.h
similarity index 100%
rename from include/linux/virtio_9p.h
rename to include/uapi/linux/virtio_9p.h
diff --git a/include/linux/virtio_balloon.h b/include/uapi/linux/virtio_balloon.h
similarity index 100%
rename from include/linux/virtio_balloon.h
rename to include/uapi/linux/virtio_balloon.h
diff --git a/include/linux/virtio_blk.h b/include/uapi/linux/virtio_blk.h
similarity index 100%
rename from include/linux/virtio_blk.h
rename to include/uapi/linux/virtio_blk.h
diff --git a/include/uapi/linux/virtio_config.h b/include/uapi/linux/virtio_config.h
new file mode 100644
index 0000000..b7cda39
--- /dev/null
+++ b/include/uapi/linux/virtio_config.h
@@ -0,0 +1,54 @@
+#ifndef _UAPI_LINUX_VIRTIO_CONFIG_H
+#define _UAPI_LINUX_VIRTIO_CONFIG_H
+/* This header, excluding the #ifdef __KERNEL__ part, is BSD licensed so
+ * anyone can use the definitions to implement compatible drivers/servers.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of IBM nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE. */
+
+/* Virtio devices use a standardized configuration space to define their
+ * features and pass configuration information, but each implementation can
+ * store and access that space differently. */
+#include <linux/types.h>
+
+/* Status byte for guest to report progress, and synchronize features. */
+/* We have seen device and processed generic fields (VIRTIO_CONFIG_F_VIRTIO) */
+#define VIRTIO_CONFIG_S_ACKNOWLEDGE 1
+/* We have found a driver for the device. */
+#define VIRTIO_CONFIG_S_DRIVER 2
+/* Driver has used its parts of the config, and is happy */
+#define VIRTIO_CONFIG_S_DRIVER_OK 4
+/* We've given up on this device. */
+#define VIRTIO_CONFIG_S_FAILED 0x80
+
+/* Some virtio feature bits (currently bits 28 through 31) are reserved for the
+ * transport being used (eg. virtio_ring), the rest are per-device feature
+ * bits. */
+#define VIRTIO_TRANSPORT_F_START 28
+#define VIRTIO_TRANSPORT_F_END 32
+
+/* Do we get callbacks when the ring is completely used, even if we've
+ * suppressed them? */
+#define VIRTIO_F_NOTIFY_ON_EMPTY 24
+
+#endif /* _UAPI_LINUX_VIRTIO_CONFIG_H */
diff --git a/include/uapi/linux/virtio_console.h b/include/uapi/linux/virtio_console.h
new file mode 100644
index 0000000..ee13ab6
--- /dev/null
+++ b/include/uapi/linux/virtio_console.h
@@ -0,0 +1,74 @@
+/*
+ * This header, excluding the #ifdef __KERNEL__ part, is BSD licensed so
+ * anyone can use the definitions to implement compatible drivers/servers:
+ *
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of IBM nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * Copyright (C) Red Hat, Inc., 2009, 2010, 2011
+ * Copyright (C) Amit Shah <amit.shah@redhat.com>, 2009, 2010, 2011
+ */
+#ifndef _UAPI_LINUX_VIRTIO_CONSOLE_H
+#define _UAPI_LINUX_VIRTIO_CONSOLE_H
+#include <linux/types.h>
+#include <linux/virtio_ids.h>
+#include <linux/virtio_config.h>
+
+/* Feature bits */
+#define VIRTIO_CONSOLE_F_SIZE 0 /* Does host provide console size? */
+#define VIRTIO_CONSOLE_F_MULTIPORT 1 /* Does host provide multiple ports? */
+
+#define VIRTIO_CONSOLE_BAD_ID (~(u32)0)
+
+struct virtio_console_config {
+ /* colums of the screens */
+ __u16 cols;
+ /* rows of the screens */
+ __u16 rows;
+ /* max. number of ports this device can hold */
+ __u32 max_nr_ports;
+} __attribute__((packed));
+
+/*
+ * A message that's passed between the Host and the Guest for a
+ * particular port.
+ */
+struct virtio_console_control {
+ __u32 id; /* Port number */
+ __u16 event; /* The kind of control event (see below) */
+ __u16 value; /* Extra information for the key */
+};
+
+/* Some events for control messages */
+#define VIRTIO_CONSOLE_DEVICE_READY 0
+#define VIRTIO_CONSOLE_PORT_ADD 1
+#define VIRTIO_CONSOLE_PORT_REMOVE 2
+#define VIRTIO_CONSOLE_PORT_READY 3
+#define VIRTIO_CONSOLE_CONSOLE_PORT 4
+#define VIRTIO_CONSOLE_RESIZE 5
+#define VIRTIO_CONSOLE_PORT_OPEN 6
+#define VIRTIO_CONSOLE_PORT_NAME 7
+
+
+#endif /* _UAPI_LINUX_VIRTIO_CONSOLE_H */
diff --git a/include/linux/virtio_ids.h b/include/uapi/linux/virtio_ids.h
similarity index 100%
rename from include/linux/virtio_ids.h
rename to include/uapi/linux/virtio_ids.h
diff --git a/include/linux/virtio_net.h b/include/uapi/linux/virtio_net.h
similarity index 100%
rename from include/linux/virtio_net.h
rename to include/uapi/linux/virtio_net.h
diff --git a/include/linux/virtio_pci.h b/include/uapi/linux/virtio_pci.h
similarity index 100%
rename from include/linux/virtio_pci.h
rename to include/uapi/linux/virtio_pci.h
diff --git a/include/uapi/linux/virtio_ring.h b/include/uapi/linux/virtio_ring.h
new file mode 100644
index 0000000..a99f9b7
--- /dev/null
+++ b/include/uapi/linux/virtio_ring.h
@@ -0,0 +1,163 @@
+#ifndef _UAPI_LINUX_VIRTIO_RING_H
+#define _UAPI_LINUX_VIRTIO_RING_H
+/* An interface for efficient virtio implementation, currently for use by KVM
+ * and lguest, but hopefully others soon. Do NOT change this since it will
+ * break existing servers and clients.
+ *
+ * This header is BSD licensed so anyone can use the definitions to implement
+ * compatible drivers/servers.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of IBM nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * Copyright Rusty Russell IBM Corporation 2007. */
+#include <linux/types.h>
+
+/* This marks a buffer as continuing via the next field. */
+#define VRING_DESC_F_NEXT 1
+/* This marks a buffer as write-only (otherwise read-only). */
+#define VRING_DESC_F_WRITE 2
+/* This means the buffer contains a list of buffer descriptors. */
+#define VRING_DESC_F_INDIRECT 4
+
+/* The Host uses this in used->flags to advise the Guest: don't kick me when
+ * you add a buffer. It's unreliable, so it's simply an optimization. Guest
+ * will still kick if it's out of buffers. */
+#define VRING_USED_F_NO_NOTIFY 1
+/* The Guest uses this in avail->flags to advise the Host: don't interrupt me
+ * when you consume a buffer. It's unreliable, so it's simply an
+ * optimization. */
+#define VRING_AVAIL_F_NO_INTERRUPT 1
+
+/* We support indirect buffer descriptors */
+#define VIRTIO_RING_F_INDIRECT_DESC 28
+
+/* The Guest publishes the used index for which it expects an interrupt
+ * at the end of the avail ring. Host should ignore the avail->flags field. */
+/* The Host publishes the avail index for which it expects a kick
+ * at the end of the used ring. Guest should ignore the used->flags field. */
+#define VIRTIO_RING_F_EVENT_IDX 29
+
+/* Virtio ring descriptors: 16 bytes. These can chain together via "next". */
+struct vring_desc {
+ /* Address (guest-physical). */
+ __u64 addr;
+ /* Length. */
+ __u32 len;
+ /* The flags as indicated above. */
+ __u16 flags;
+ /* We chain unused descriptors via this, too */
+ __u16 next;
+};
+
+struct vring_avail {
+ __u16 flags;
+ __u16 idx;
+ __u16 ring[];
+};
+
+/* u32 is used here for ids for padding reasons. */
+struct vring_used_elem {
+ /* Index of start of used descriptor chain. */
+ __u32 id;
+ /* Total length of the descriptor chain which was used (written to) */
+ __u32 len;
+};
+
+struct vring_used {
+ __u16 flags;
+ __u16 idx;
+ struct vring_used_elem ring[];
+};
+
+struct vring {
+ unsigned int num;
+
+ struct vring_desc *desc;
+
+ struct vring_avail *avail;
+
+ struct vring_used *used;
+};
+
+/* The standard layout for the ring is a continuous chunk of memory which looks
+ * like this. We assume num is a power of 2.
+ *
+ * struct vring
+ * {
+ * // The actual descriptors (16 bytes each)
+ * struct vring_desc desc[num];
+ *
+ * // A ring of available descriptor heads with free-running index.
+ * __u16 avail_flags;
+ * __u16 avail_idx;
+ * __u16 available[num];
+ * __u16 used_event_idx;
+ *
+ * // Padding to the next align boundary.
+ * char pad[];
+ *
+ * // A ring of used descriptor heads with free-running index.
+ * __u16 used_flags;
+ * __u16 used_idx;
+ * struct vring_used_elem used[num];
+ * __u16 avail_event_idx;
+ * };
+ */
+/* We publish the used event index at the end of the available ring, and vice
+ * versa. They are at the end for backwards compatibility. */
+#define vring_used_event(vr) ((vr)->avail->ring[(vr)->num])
+#define vring_avail_event(vr) (*(__u16 *)&(vr)->used->ring[(vr)->num])
+
+static inline void vring_init(struct vring *vr, unsigned int num, void *p,
+ unsigned long align)
+{
+ vr->num = num;
+ vr->desc = p;
+ vr->avail = p + num*sizeof(struct vring_desc);
+ vr->used = (void *)(((unsigned long)&vr->avail->ring[num] + sizeof(__u16)
+ + align-1) & ~(align - 1));
+}
+
+static inline unsigned vring_size(unsigned int num, unsigned long align)
+{
+ return ((sizeof(struct vring_desc) * num + sizeof(__u16) * (3 + num)
+ + align - 1) & ~(align - 1))
+ + sizeof(__u16) * 3 + sizeof(struct vring_used_elem) * num;
+}
+
+/* The following is used with USED_EVENT_IDX and AVAIL_EVENT_IDX */
+/* Assuming a given event_idx value from the other size, if
+ * we have just incremented index from old to new_idx,
+ * should we trigger an event? */
+static inline int vring_need_event(__u16 event_idx, __u16 new_idx, __u16 old)
+{
+ /* Note: Xen has similar logic for notification hold-off
+ * in include/xen/interface/io/ring.h with req_event and req_prod
+ * corresponding to event_idx + 1 and new_idx respectively.
+ * Note also that req_event and req_prod in Xen start at 1,
+ * event indexes in virtio start at 0. */
+ return (__u16)(new_idx - event_idx - 1) < (__u16)(new_idx - old);
+}
+
+#endif /* _UAPI_LINUX_VIRTIO_RING_H */
diff --git a/include/linux/virtio_rng.h b/include/uapi/linux/virtio_rng.h
similarity index 100%
rename from include/linux/virtio_rng.h
rename to include/uapi/linux/virtio_rng.h
diff --git a/include/uapi/linux/vt.h b/include/uapi/linux/vt.h
new file mode 100644
index 0000000..4b59a26
--- /dev/null
+++ b/include/uapi/linux/vt.h
@@ -0,0 +1,90 @@
+#ifndef _UAPI_LINUX_VT_H
+#define _UAPI_LINUX_VT_H
+
+
+/*
+ * These constants are also useful for user-level apps (e.g., VC
+ * resizing).
+ */
+#define MIN_NR_CONSOLES 1 /* must be at least 1 */
+#define MAX_NR_CONSOLES 63 /* serial lines start at 64 */
+#define MAX_NR_USER_CONSOLES 63 /* must be root to allocate above this */
+ /* Note: the ioctl VT_GETSTATE does not work for
+ consoles 16 and higher (since it returns a short) */
+
+/* 0x56 is 'V', to avoid collision with termios and kd */
+
+#define VT_OPENQRY 0x5600 /* find available vt */
+
+struct vt_mode {
+ char mode; /* vt mode */
+ char waitv; /* if set, hang on writes if not active */
+ short relsig; /* signal to raise on release req */
+ short acqsig; /* signal to raise on acquisition */
+ short frsig; /* unused (set to 0) */
+};
+#define VT_GETMODE 0x5601 /* get mode of active vt */
+#define VT_SETMODE 0x5602 /* set mode of active vt */
+#define VT_AUTO 0x00 /* auto vt switching */
+#define VT_PROCESS 0x01 /* process controls switching */
+#define VT_ACKACQ 0x02 /* acknowledge switch */
+
+struct vt_stat {
+ unsigned short v_active; /* active vt */
+ unsigned short v_signal; /* signal to send */
+ unsigned short v_state; /* vt bitmask */
+};
+#define VT_GETSTATE 0x5603 /* get global vt state info */
+#define VT_SENDSIG 0x5604 /* signal to send to bitmask of vts */
+
+#define VT_RELDISP 0x5605 /* release display */
+
+#define VT_ACTIVATE 0x5606 /* make vt active */
+#define VT_WAITACTIVE 0x5607 /* wait for vt active */
+#define VT_DISALLOCATE 0x5608 /* free memory associated to vt */
+
+struct vt_sizes {
+ unsigned short v_rows; /* number of rows */
+ unsigned short v_cols; /* number of columns */
+ unsigned short v_scrollsize; /* number of lines of scrollback */
+};
+#define VT_RESIZE 0x5609 /* set kernel's idea of screensize */
+
+struct vt_consize {
+ unsigned short v_rows; /* number of rows */
+ unsigned short v_cols; /* number of columns */
+ unsigned short v_vlin; /* number of pixel rows on screen */
+ unsigned short v_clin; /* number of pixel rows per character */
+ unsigned short v_vcol; /* number of pixel columns on screen */
+ unsigned short v_ccol; /* number of pixel columns per character */
+};
+#define VT_RESIZEX 0x560A /* set kernel's idea of screensize + more */
+#define VT_LOCKSWITCH 0x560B /* disallow vt switching */
+#define VT_UNLOCKSWITCH 0x560C /* allow vt switching */
+#define VT_GETHIFONTMASK 0x560D /* return hi font mask */
+
+struct vt_event {
+ unsigned int event;
+#define VT_EVENT_SWITCH 0x0001 /* Console switch */
+#define VT_EVENT_BLANK 0x0002 /* Screen blank */
+#define VT_EVENT_UNBLANK 0x0004 /* Screen unblank */
+#define VT_EVENT_RESIZE 0x0008 /* Resize display */
+#define VT_MAX_EVENT 0x000F
+ unsigned int oldev; /* Old console */
+ unsigned int newev; /* New console (if changing) */
+ unsigned int pad[4]; /* Padding for expansion */
+};
+
+#define VT_WAITEVENT 0x560E /* Wait for an event */
+
+struct vt_setactivate {
+ unsigned int console;
+ struct vt_mode mode;
+};
+
+#define VT_SETACTIVATE 0x560F /* Activate and set the mode of a console */
+
+
+#define vt_get_kmsg_redirect() vt_kmsg_redirect(-1)
+
+#endif /* _UAPI_LINUX_VT_H */
diff --git a/include/uapi/linux/wait.h b/include/uapi/linux/wait.h
new file mode 100644
index 0000000..9393eea
--- /dev/null
+++ b/include/uapi/linux/wait.h
@@ -0,0 +1,21 @@
+#ifndef _UAPI_LINUX_WAIT_H
+#define _UAPI_LINUX_WAIT_H
+
+#define WNOHANG 0x00000001
+#define WUNTRACED 0x00000002
+#define WSTOPPED WUNTRACED
+#define WEXITED 0x00000004
+#define WCONTINUED 0x00000008
+#define WNOWAIT 0x01000000 /* Don't reap, just poll status. */
+
+#define __WNOTHREAD 0x20000000 /* Don't wait on children of other threads in this group */
+#define __WALL 0x40000000 /* Wait on all children, regardless of type */
+#define __WCLONE 0x80000000 /* Wait only on non-SIGCHLD children */
+
+/* First argument to waitid: */
+#define P_ALL 0
+#define P_PID 1
+#define P_PGID 2
+
+
+#endif /* _UAPI_LINUX_WAIT_H */
diff --git a/include/uapi/linux/wanrouter.h b/include/uapi/linux/wanrouter.h
new file mode 100644
index 0000000..7617df2
--- /dev/null
+++ b/include/uapi/linux/wanrouter.h
@@ -0,0 +1,452 @@
+/*****************************************************************************
+* wanrouter.h Definitions for the WAN Multiprotocol Router Module.
+* This module provides API and common services for WAN Link
+* Drivers and is completely hardware-independent.
+*
+* Author: Nenad Corbic <ncorbic@sangoma.com>
+* Gideon Hack
+* Additions: Arnaldo Melo
+*
+* Copyright: (c) 1995-2000 Sangoma Technologies Inc.
+*
+* This program is free software; you can redistribute it and/or
+* modify it under the terms of the GNU General Public License
+* as published by the Free Software Foundation; either version
+* 2 of the License, or (at your option) any later version.
+* ============================================================================
+* Jul 21, 2000 Nenad Corbic Added WAN_FT1_READY State
+* Feb 24, 2000 Nenad Corbic Added support for socket based x25api
+* Jan 28, 2000 Nenad Corbic Added support for the ASYNC protocol.
+* Oct 04, 1999 Nenad Corbic Updated for 2.1.0 release
+* Jun 02, 1999 Gideon Hack Added support for the S514 adapter.
+* May 23, 1999 Arnaldo Melo Added local_addr to wanif_conf_t
+* WAN_DISCONNECTING state added
+* Jul 20, 1998 David Fong Added Inverse ARP options to 'wanif_conf_t'
+* Jun 12, 1998 David Fong Added Cisco HDLC support.
+* Dec 16, 1997 Jaspreet Singh Moved 'enable_IPX' and 'network_number' to
+* 'wanif_conf_t'
+* Dec 05, 1997 Jaspreet Singh Added 'pap', 'chap' to 'wanif_conf_t'
+* Added 'authenticator' to 'wan_ppp_conf_t'
+* Nov 06, 1997 Jaspreet Singh Changed Router Driver version to 1.1 from 1.0
+* Oct 20, 1997 Jaspreet Singh Added 'cir','bc','be' and 'mc' to 'wanif_conf_t'
+* Added 'enable_IPX' and 'network_number' to
+* 'wan_device_t'. Also added defines for
+* UDP PACKET TYPE, Interrupt test, critical values
+* for RACE conditions.
+* Oct 05, 1997 Jaspreet Singh Added 'dlci_num' and 'dlci[100]' to
+* 'wan_fr_conf_t' to configure a list of dlci(s)
+* for a NODE
+* Jul 07, 1997 Jaspreet Singh Added 'ttl' to 'wandev_conf_t' & 'wan_device_t'
+* May 29, 1997 Jaspreet Singh Added 'tx_int_enabled' to 'wan_device_t'
+* May 21, 1997 Jaspreet Singh Added 'udp_port' to 'wan_device_t'
+* Apr 25, 1997 Farhan Thawar Added 'udp_port' to 'wandev_conf_t'
+* Jan 16, 1997 Gene Kozin router_devlist made public
+* Jan 02, 1997 Gene Kozin Initial version (based on wanpipe.h).
+*****************************************************************************/
+
+#ifndef _UAPI_ROUTER_H
+#define _UAPI_ROUTER_H
+
+#define ROUTER_NAME "wanrouter" /* in case we ever change it */
+#define ROUTER_VERSION 1 /* version number */
+#define ROUTER_RELEASE 1 /* release (minor version) number */
+#define ROUTER_IOCTL 'W' /* for IOCTL calls */
+#define ROUTER_MAGIC 0x524D4157L /* signature: 'WANR' reversed */
+
+/* IOCTL codes for /proc/router/<device> entries (up to 255) */
+enum router_ioctls
+{
+ ROUTER_SETUP = ROUTER_IOCTL<<8, /* configure device */
+ ROUTER_DOWN, /* shut down device */
+ ROUTER_STAT, /* get device status */
+ ROUTER_IFNEW, /* add interface */
+ ROUTER_IFDEL, /* delete interface */
+ ROUTER_IFSTAT, /* get interface status */
+ ROUTER_USER = (ROUTER_IOCTL<<8)+16, /* driver-specific calls */
+ ROUTER_USER_MAX = (ROUTER_IOCTL<<8)+31
+};
+
+/* identifiers for displaying proc file data for dual port adapters */
+#define PROC_DATA_PORT_0 0x8000 /* the data is for port 0 */
+#define PROC_DATA_PORT_1 0x8001 /* the data is for port 1 */
+
+/* NLPID for packet encapsulation (ISO/IEC TR 9577) */
+#define NLPID_IP 0xCC /* Internet Protocol Datagram */
+#define NLPID_SNAP 0x80 /* IEEE Subnetwork Access Protocol */
+#define NLPID_CLNP 0x81 /* ISO/IEC 8473 */
+#define NLPID_ESIS 0x82 /* ISO/IEC 9542 */
+#define NLPID_ISIS 0x83 /* ISO/IEC ISIS */
+#define NLPID_Q933 0x08 /* CCITT Q.933 */
+
+/* Miscellaneous */
+#define WAN_IFNAME_SZ 15 /* max length of the interface name */
+#define WAN_DRVNAME_SZ 15 /* max length of the link driver name */
+#define WAN_ADDRESS_SZ 31 /* max length of the WAN media address */
+#define USED_BY_FIELD 8 /* max length of the used by field */
+
+/* Defines for UDP PACKET TYPE */
+#define UDP_PTPIPE_TYPE 0x01
+#define UDP_FPIPE_TYPE 0x02
+#define UDP_CPIPE_TYPE 0x03
+#define UDP_DRVSTATS_TYPE 0x04
+#define UDP_INVALID_TYPE 0x05
+
+/* Command return code */
+#define CMD_OK 0 /* normal firmware return code */
+#define CMD_TIMEOUT 0xFF /* firmware command timed out */
+
+/* UDP Packet Management */
+#define UDP_PKT_FRM_STACK 0x00
+#define UDP_PKT_FRM_NETWORK 0x01
+
+/* Maximum interrupt test counter */
+#define MAX_INTR_TEST_COUNTER 100
+
+/* Critical Values for RACE conditions*/
+#define CRITICAL_IN_ISR 0xA1
+#define CRITICAL_INTR_HANDLED 0xB1
+
+/****** Data Types **********************************************************/
+
+/*----------------------------------------------------------------------------
+ * X.25-specific link-level configuration.
+ */
+typedef struct wan_x25_conf
+{
+ unsigned lo_pvc; /* lowest permanent circuit number */
+ unsigned hi_pvc; /* highest permanent circuit number */
+ unsigned lo_svc; /* lowest switched circuit number */
+ unsigned hi_svc; /* highest switched circuit number */
+ unsigned hdlc_window; /* HDLC window size (1..7) */
+ unsigned pkt_window; /* X.25 packet window size (1..7) */
+ unsigned t1; /* HDLC timer T1, sec (1..30) */
+ unsigned t2; /* HDLC timer T2, sec (0..29) */
+ unsigned t4; /* HDLC supervisory frame timer = T4 * T1 */
+ unsigned n2; /* HDLC retransmission limit (1..30) */
+ unsigned t10_t20; /* X.25 RESTART timeout, sec (1..255) */
+ unsigned t11_t21; /* X.25 CALL timeout, sec (1..255) */
+ unsigned t12_t22; /* X.25 RESET timeout, sec (1..255) */
+ unsigned t13_t23; /* X.25 CLEAR timeout, sec (1..255) */
+ unsigned t16_t26; /* X.25 INTERRUPT timeout, sec (1..255) */
+ unsigned t28; /* X.25 REGISTRATION timeout, sec (1..255) */
+ unsigned r10_r20; /* RESTART retransmission limit (0..250) */
+ unsigned r12_r22; /* RESET retransmission limit (0..250) */
+ unsigned r13_r23; /* CLEAR retransmission limit (0..250) */
+ unsigned ccitt_compat; /* compatibility mode: 1988/1984/1980 */
+ unsigned x25_conf_opt; /* User defined x25 config optoins */
+ unsigned char LAPB_hdlc_only; /* Run in HDLC only mode */
+ unsigned char logging; /* Control connection logging */
+ unsigned char oob_on_modem; /* Whether to send modem status to the user app */
+} wan_x25_conf_t;
+
+/*----------------------------------------------------------------------------
+ * Frame relay specific link-level configuration.
+ */
+typedef struct wan_fr_conf
+{
+ unsigned signalling; /* local in-channel signalling type */
+ unsigned t391; /* link integrity verification timer */
+ unsigned t392; /* polling verification timer */
+ unsigned n391; /* full status polling cycle counter */
+ unsigned n392; /* error threshold counter */
+ unsigned n393; /* monitored events counter */
+ unsigned dlci_num; /* number of DLCs (access node) */
+ unsigned dlci[100]; /* List of all DLCIs */
+} wan_fr_conf_t;
+
+/*----------------------------------------------------------------------------
+ * PPP-specific link-level configuration.
+ */
+typedef struct wan_ppp_conf
+{
+ unsigned restart_tmr; /* restart timer */
+ unsigned auth_rsrt_tmr; /* authentication timer */
+ unsigned auth_wait_tmr; /* authentication timer */
+ unsigned mdm_fail_tmr; /* modem failure timer */
+ unsigned dtr_drop_tmr; /* DTR drop timer */
+ unsigned connect_tmout; /* connection timeout */
+ unsigned conf_retry; /* max. retry */
+ unsigned term_retry; /* max. retry */
+ unsigned fail_retry; /* max. retry */
+ unsigned auth_retry; /* max. retry */
+ unsigned auth_options; /* authentication opt. */
+ unsigned ip_options; /* IP options */
+ char authenticator; /* AUTHENTICATOR or not */
+ char ip_mode; /* Static/Host/Peer */
+} wan_ppp_conf_t;
+
+/*----------------------------------------------------------------------------
+ * CHDLC-specific link-level configuration.
+ */
+typedef struct wan_chdlc_conf
+{
+ unsigned char ignore_dcd; /* Protocol options: */
+ unsigned char ignore_cts; /* Ignore these to determine */
+ unsigned char ignore_keepalive; /* link status (Yes or No) */
+ unsigned char hdlc_streaming; /* hdlc_streaming mode (Y/N) */
+ unsigned char receive_only; /* no transmit buffering (Y/N) */
+ unsigned keepalive_tx_tmr; /* transmit keepalive timer */
+ unsigned keepalive_rx_tmr; /* receive keepalive timer */
+ unsigned keepalive_err_margin; /* keepalive_error_tolerance */
+ unsigned slarp_timer; /* SLARP request timer */
+} wan_chdlc_conf_t;
+
+
+/*----------------------------------------------------------------------------
+ * WAN device configuration. Passed to ROUTER_SETUP IOCTL.
+ */
+typedef struct wandev_conf
+{
+ unsigned magic; /* magic number (for verification) */
+ unsigned config_id; /* configuration structure identifier */
+ /****** hardware configuration ******/
+ unsigned ioport; /* adapter I/O port base */
+ unsigned long maddr; /* dual-port memory address */
+ unsigned msize; /* dual-port memory size */
+ int irq; /* interrupt request level */
+ int dma; /* DMA request level */
+ char S514_CPU_no[1]; /* S514 PCI adapter CPU number ('A' or 'B') */
+ unsigned PCI_slot_no; /* S514 PCI adapter slot number */
+ char auto_pci_cfg; /* S515 PCI automatic slot detection */
+ char comm_port; /* Communication Port (PRI=0, SEC=1) */
+ unsigned bps; /* data transfer rate */
+ unsigned mtu; /* maximum transmit unit size */
+ unsigned udp_port; /* UDP port for management */
+ unsigned char ttl; /* Time To Live for UDP security */
+ unsigned char ft1; /* FT1 Configurator Option */
+ char interface; /* RS-232/V.35, etc. */
+ char clocking; /* external/internal */
+ char line_coding; /* NRZ/NRZI/FM0/FM1, etc. */
+ char station; /* DTE/DCE, primary/secondary, etc. */
+ char connection; /* permanent/switched/on-demand */
+ char read_mode; /* read mode: Polling or interrupt */
+ char receive_only; /* disable tx buffers */
+ char tty; /* Create a fake tty device */
+ unsigned tty_major; /* Major number for wanpipe tty device */
+ unsigned tty_minor; /* Minor number for wanpipe tty device */
+ unsigned tty_mode; /* TTY operation mode SYNC or ASYNC */
+ char backup; /* Backup Mode */
+ unsigned hw_opt[4]; /* other hardware options */
+ unsigned reserved[4];
+ /****** arbitrary data ***************/
+ unsigned data_size; /* data buffer size */
+ void* data; /* data buffer, e.g. firmware */
+ union /****** protocol-specific ************/
+ {
+ wan_x25_conf_t x25; /* X.25 configuration */
+ wan_ppp_conf_t ppp; /* PPP configuration */
+ wan_fr_conf_t fr; /* frame relay configuration */
+ wan_chdlc_conf_t chdlc; /* Cisco HDLC configuration */
+ } u;
+} wandev_conf_t;
+
+/* 'config_id' definitions */
+#define WANCONFIG_X25 101 /* X.25 link */
+#define WANCONFIG_FR 102 /* frame relay link */
+#define WANCONFIG_PPP 103 /* synchronous PPP link */
+#define WANCONFIG_CHDLC 104 /* Cisco HDLC Link */
+#define WANCONFIG_BSC 105 /* BiSync Streaming */
+#define WANCONFIG_HDLC 106 /* HDLC Support */
+#define WANCONFIG_MPPP 107 /* Multi Port PPP over RAW CHDLC */
+
+/*
+ * Configuration options defines.
+ */
+/* general options */
+#define WANOPT_OFF 0
+#define WANOPT_ON 1
+#define WANOPT_NO 0
+#define WANOPT_YES 1
+
+/* intercace options */
+#define WANOPT_RS232 0
+#define WANOPT_V35 1
+
+/* data encoding options */
+#define WANOPT_NRZ 0
+#define WANOPT_NRZI 1
+#define WANOPT_FM0 2
+#define WANOPT_FM1 3
+
+/* link type options */
+#define WANOPT_POINTTOPOINT 0 /* RTS always active */
+#define WANOPT_MULTIDROP 1 /* RTS is active when transmitting */
+
+/* clocking options */
+#define WANOPT_EXTERNAL 0
+#define WANOPT_INTERNAL 1
+
+/* station options */
+#define WANOPT_DTE 0
+#define WANOPT_DCE 1
+#define WANOPT_CPE 0
+#define WANOPT_NODE 1
+#define WANOPT_SECONDARY 0
+#define WANOPT_PRIMARY 1
+
+/* connection options */
+#define WANOPT_PERMANENT 0 /* DTR always active */
+#define WANOPT_SWITCHED 1 /* use DTR to setup link (dial-up) */
+#define WANOPT_ONDEMAND 2 /* activate DTR only before sending */
+
+/* frame relay in-channel signalling */
+#define WANOPT_FR_ANSI 1 /* ANSI T1.617 Annex D */
+#define WANOPT_FR_Q933 2 /* ITU Q.933A */
+#define WANOPT_FR_LMI 3 /* LMI */
+
+/* PPP IP Mode Options */
+#define WANOPT_PPP_STATIC 0
+#define WANOPT_PPP_HOST 1
+#define WANOPT_PPP_PEER 2
+
+/* ASY Mode Options */
+#define WANOPT_ONE 1
+#define WANOPT_TWO 2
+#define WANOPT_ONE_AND_HALF 3
+
+#define WANOPT_NONE 0
+#define WANOPT_ODD 1
+#define WANOPT_EVEN 2
+
+/* CHDLC Protocol Options */
+/* DF Commented out for now.
+
+#define WANOPT_CHDLC_NO_DCD IGNORE_DCD_FOR_LINK_STAT
+#define WANOPT_CHDLC_NO_CTS IGNORE_CTS_FOR_LINK_STAT
+#define WANOPT_CHDLC_NO_KEEPALIVE IGNORE_KPALV_FOR_LINK_STAT
+*/
+
+/* Port options */
+#define WANOPT_PRI 0
+#define WANOPT_SEC 1
+/* read mode */
+#define WANOPT_INTR 0
+#define WANOPT_POLL 1
+
+
+#define WANOPT_TTY_SYNC 0
+#define WANOPT_TTY_ASYNC 1
+/*----------------------------------------------------------------------------
+ * WAN Link Status Info (for ROUTER_STAT IOCTL).
+ */
+typedef struct wandev_stat
+{
+ unsigned state; /* link state */
+ unsigned ndev; /* number of configured interfaces */
+
+ /* link/interface configuration */
+ unsigned connection; /* permanent/switched/on-demand */
+ unsigned media_type; /* Frame relay/PPP/X.25/SDLC, etc. */
+ unsigned mtu; /* max. transmit unit for this device */
+
+ /* physical level statistics */
+ unsigned modem_status; /* modem status */
+ unsigned rx_frames; /* received frames count */
+ unsigned rx_overruns; /* receiver overrun error count */
+ unsigned rx_crc_err; /* receive CRC error count */
+ unsigned rx_aborts; /* received aborted frames count */
+ unsigned rx_bad_length; /* unexpetedly long/short frames count */
+ unsigned rx_dropped; /* frames discarded at device level */
+ unsigned tx_frames; /* transmitted frames count */
+ unsigned tx_underruns; /* aborted transmissions (underruns) count */
+ unsigned tx_timeouts; /* transmission timeouts */
+ unsigned tx_rejects; /* other transmit errors */
+
+ /* media level statistics */
+ unsigned rx_bad_format; /* frames with invalid format */
+ unsigned rx_bad_addr; /* frames with invalid media address */
+ unsigned tx_retries; /* frames re-transmitted */
+ unsigned reserved[16]; /* reserved for future use */
+} wandev_stat_t;
+
+/* 'state' defines */
+enum wan_states
+{
+ WAN_UNCONFIGURED, /* link/channel is not configured */
+ WAN_DISCONNECTED, /* link/channel is disconnected */
+ WAN_CONNECTING, /* connection is in progress */
+ WAN_CONNECTED, /* link/channel is operational */
+ WAN_LIMIT, /* for verification only */
+ WAN_DUALPORT, /* for Dual Port cards */
+ WAN_DISCONNECTING,
+ WAN_FT1_READY /* FT1 Configurator Ready */
+};
+
+enum {
+ WAN_LOCAL_IP,
+ WAN_POINTOPOINT_IP,
+ WAN_NETMASK_IP,
+ WAN_BROADCAST_IP
+};
+
+/* 'modem_status' masks */
+#define WAN_MODEM_CTS 0x0001 /* CTS line active */
+#define WAN_MODEM_DCD 0x0002 /* DCD line active */
+#define WAN_MODEM_DTR 0x0010 /* DTR line active */
+#define WAN_MODEM_RTS 0x0020 /* RTS line active */
+
+/*----------------------------------------------------------------------------
+ * WAN interface (logical channel) configuration (for ROUTER_IFNEW IOCTL).
+ */
+typedef struct wanif_conf
+{
+ unsigned magic; /* magic number */
+ unsigned config_id; /* configuration identifier */
+ char name[WAN_IFNAME_SZ+1]; /* interface name, ASCIIZ */
+ char addr[WAN_ADDRESS_SZ+1]; /* media address, ASCIIZ */
+ char usedby[USED_BY_FIELD]; /* used by API or WANPIPE */
+ unsigned idle_timeout; /* sec, before disconnecting */
+ unsigned hold_timeout; /* sec, before re-connecting */
+ unsigned cir; /* Committed Information Rate fwd,bwd*/
+ unsigned bc; /* Committed Burst Size fwd, bwd */
+ unsigned be; /* Excess Burst Size fwd, bwd */
+ unsigned char enable_IPX; /* Enable or Disable IPX */
+ unsigned char inarp; /* Send Inverse ARP requests Y/N */
+ unsigned inarp_interval; /* sec, between InARP requests */
+ unsigned long network_number; /* Network Number for IPX */
+ char mc; /* Multicast on or off */
+ char local_addr[WAN_ADDRESS_SZ+1];/* local media address, ASCIIZ */
+ unsigned char port; /* board port */
+ unsigned char protocol; /* prococol used in this channel (TCPOX25 or X25) */
+ char pap; /* PAP enabled or disabled */
+ char chap; /* CHAP enabled or disabled */
+ unsigned char userid[511]; /* List of User Id */
+ unsigned char passwd[511]; /* List of passwords */
+ unsigned char sysname[31]; /* Name of the system */
+ unsigned char ignore_dcd; /* Protocol options: */
+ unsigned char ignore_cts; /* Ignore these to determine */
+ unsigned char ignore_keepalive; /* link status (Yes or No) */
+ unsigned char hdlc_streaming; /* Hdlc streaming mode (Y/N) */
+ unsigned keepalive_tx_tmr; /* transmit keepalive timer */
+ unsigned keepalive_rx_tmr; /* receive keepalive timer */
+ unsigned keepalive_err_margin; /* keepalive_error_tolerance */
+ unsigned slarp_timer; /* SLARP request timer */
+ unsigned char ttl; /* Time To Live for UDP security */
+ char interface; /* RS-232/V.35, etc. */
+ char clocking; /* external/internal */
+ unsigned bps; /* data transfer rate */
+ unsigned mtu; /* maximum transmit unit size */
+ unsigned char if_down; /* brind down interface when disconnected */
+ unsigned char gateway; /* Is this interface a gateway */
+ unsigned char true_if_encoding; /* Set the dev->type to true board protocol */
+
+ unsigned char asy_data_trans; /* async API options */
+ unsigned char rts_hs_for_receive; /* async Protocol options */
+ unsigned char xon_xoff_hs_for_receive;
+ unsigned char xon_xoff_hs_for_transmit;
+ unsigned char dcd_hs_for_transmit;
+ unsigned char cts_hs_for_transmit;
+ unsigned char async_mode;
+ unsigned tx_bits_per_char;
+ unsigned rx_bits_per_char;
+ unsigned stop_bits;
+ unsigned char parity;
+ unsigned break_timer;
+ unsigned inter_char_timer;
+ unsigned rx_complete_length;
+ unsigned xon_char;
+ unsigned xoff_char;
+ unsigned char receive_only; /* no transmit buffering (Y/N) */
+} wanif_conf_t;
+
+#endif /* _UAPI_ROUTER_H */
diff --git a/include/uapi/linux/watchdog.h b/include/uapi/linux/watchdog.h
new file mode 100644
index 0000000..2babe72
--- /dev/null
+++ b/include/uapi/linux/watchdog.h
@@ -0,0 +1,57 @@
+/*
+ * Generic watchdog defines. Derived from..
+ *
+ * Berkshire PC Watchdog Defines
+ * by Ken Hollis <khollis@bitgate.com>
+ *
+ */
+
+#ifndef _UAPI_LINUX_WATCHDOG_H
+#define _UAPI_LINUX_WATCHDOG_H
+
+#include <linux/ioctl.h>
+#include <linux/types.h>
+
+#define WATCHDOG_IOCTL_BASE 'W'
+
+struct watchdog_info {
+ __u32 options; /* Options the card/driver supports */
+ __u32 firmware_version; /* Firmware version of the card */
+ __u8 identity[32]; /* Identity of the board */
+};
+
+#define WDIOC_GETSUPPORT _IOR(WATCHDOG_IOCTL_BASE, 0, struct watchdog_info)
+#define WDIOC_GETSTATUS _IOR(WATCHDOG_IOCTL_BASE, 1, int)
+#define WDIOC_GETBOOTSTATUS _IOR(WATCHDOG_IOCTL_BASE, 2, int)
+#define WDIOC_GETTEMP _IOR(WATCHDOG_IOCTL_BASE, 3, int)
+#define WDIOC_SETOPTIONS _IOR(WATCHDOG_IOCTL_BASE, 4, int)
+#define WDIOC_KEEPALIVE _IOR(WATCHDOG_IOCTL_BASE, 5, int)
+#define WDIOC_SETTIMEOUT _IOWR(WATCHDOG_IOCTL_BASE, 6, int)
+#define WDIOC_GETTIMEOUT _IOR(WATCHDOG_IOCTL_BASE, 7, int)
+#define WDIOC_SETPRETIMEOUT _IOWR(WATCHDOG_IOCTL_BASE, 8, int)
+#define WDIOC_GETPRETIMEOUT _IOR(WATCHDOG_IOCTL_BASE, 9, int)
+#define WDIOC_GETTIMELEFT _IOR(WATCHDOG_IOCTL_BASE, 10, int)
+
+#define WDIOF_UNKNOWN -1 /* Unknown flag error */
+#define WDIOS_UNKNOWN -1 /* Unknown status error */
+
+#define WDIOF_OVERHEAT 0x0001 /* Reset due to CPU overheat */
+#define WDIOF_FANFAULT 0x0002 /* Fan failed */
+#define WDIOF_EXTERN1 0x0004 /* External relay 1 */
+#define WDIOF_EXTERN2 0x0008 /* External relay 2 */
+#define WDIOF_POWERUNDER 0x0010 /* Power bad/power fault */
+#define WDIOF_CARDRESET 0x0020 /* Card previously reset the CPU */
+#define WDIOF_POWEROVER 0x0040 /* Power over voltage */
+#define WDIOF_SETTIMEOUT 0x0080 /* Set timeout (in seconds) */
+#define WDIOF_MAGICCLOSE 0x0100 /* Supports magic close char */
+#define WDIOF_PRETIMEOUT 0x0200 /* Pretimeout (in seconds), get/set */
+#define WDIOF_ALARMONLY 0x0400 /* Watchdog triggers a management or
+ other external alarm not a reboot */
+#define WDIOF_KEEPALIVEPING 0x8000 /* Keep alive ping reply */
+
+#define WDIOS_DISABLECARD 0x0001 /* Turn off the watchdog timer */
+#define WDIOS_ENABLECARD 0x0002 /* Turn on the watchdog timer */
+#define WDIOS_TEMPPANIC 0x0004 /* Kernel panic on temperature trip */
+
+
+#endif /* _UAPI_LINUX_WATCHDOG_H */
diff --git a/include/linux/wimax.h b/include/uapi/linux/wimax.h
similarity index 100%
rename from include/linux/wimax.h
rename to include/uapi/linux/wimax.h
diff --git a/include/uapi/linux/wireless.h b/include/uapi/linux/wireless.h
new file mode 100644
index 0000000..c1592e3
--- /dev/null
+++ b/include/uapi/linux/wireless.h
@@ -0,0 +1,1128 @@
+/*
+ * This file define a set of standard wireless extensions
+ *
+ * Version : 22 16.3.07
+ *
+ * Authors : Jean Tourrilhes - HPL - <jt@hpl.hp.com>
+ * Copyright (c) 1997-2007 Jean Tourrilhes, All Rights Reserved.
+ */
+
+#ifndef _UAPI_LINUX_WIRELESS_H
+#define _UAPI_LINUX_WIRELESS_H
+
+/************************** DOCUMENTATION **************************/
+/*
+ * Initial APIs (1996 -> onward) :
+ * -----------------------------
+ * Basically, the wireless extensions are for now a set of standard ioctl
+ * call + /proc/net/wireless
+ *
+ * The entry /proc/net/wireless give statistics and information on the
+ * driver.
+ * This is better than having each driver having its entry because
+ * its centralised and we may remove the driver module safely.
+ *
+ * Ioctl are used to configure the driver and issue commands. This is
+ * better than command line options of insmod because we may want to
+ * change dynamically (while the driver is running) some parameters.
+ *
+ * The ioctl mechanimsm are copied from standard devices ioctl.
+ * We have the list of command plus a structure descibing the
+ * data exchanged...
+ * Note that to add these ioctl, I was obliged to modify :
+ * # net/core/dev.c (two place + add include)
+ * # net/ipv4/af_inet.c (one place + add include)
+ *
+ * /proc/net/wireless is a copy of /proc/net/dev.
+ * We have a structure for data passed from the driver to /proc/net/wireless
+ * Too add this, I've modified :
+ * # net/core/dev.c (two other places)
+ * # include/linux/netdevice.h (one place)
+ * # include/linux/proc_fs.h (one place)
+ *
+ * New driver API (2002 -> onward) :
+ * -------------------------------
+ * This file is only concerned with the user space API and common definitions.
+ * The new driver API is defined and documented in :
+ * # include/net/iw_handler.h
+ *
+ * Note as well that /proc/net/wireless implementation has now moved in :
+ * # net/core/wireless.c
+ *
+ * Wireless Events (2002 -> onward) :
+ * --------------------------------
+ * Events are defined at the end of this file, and implemented in :
+ * # net/core/wireless.c
+ *
+ * Other comments :
+ * --------------
+ * Do not add here things that are redundant with other mechanisms
+ * (drivers init, ifconfig, /proc/net/dev, ...) and with are not
+ * wireless specific.
+ *
+ * These wireless extensions are not magic : each driver has to provide
+ * support for them...
+ *
+ * IMPORTANT NOTE : As everything in the kernel, this is very much a
+ * work in progress. Contact me if you have ideas of improvements...
+ */
+
+/***************************** INCLUDES *****************************/
+
+#include <linux/types.h> /* for __u* and __s* typedefs */
+#include <linux/socket.h> /* for "struct sockaddr" et al */
+#include <linux/if.h> /* for IFNAMSIZ and co... */
+
+/***************************** VERSION *****************************/
+/*
+ * This constant is used to know the availability of the wireless
+ * extensions and to know which version of wireless extensions it is
+ * (there is some stuff that will be added in the future...)
+ * I just plan to increment with each new version.
+ */
+#define WIRELESS_EXT 22
+
+/*
+ * Changes :
+ *
+ * V2 to V3
+ * --------
+ * Alan Cox start some incompatibles changes. I've integrated a bit more.
+ * - Encryption renamed to Encode to avoid US regulation problems
+ * - Frequency changed from float to struct to avoid problems on old 386
+ *
+ * V3 to V4
+ * --------
+ * - Add sensitivity
+ *
+ * V4 to V5
+ * --------
+ * - Missing encoding definitions in range
+ * - Access points stuff
+ *
+ * V5 to V6
+ * --------
+ * - 802.11 support (ESSID ioctls)
+ *
+ * V6 to V7
+ * --------
+ * - define IW_ESSID_MAX_SIZE and IW_MAX_AP
+ *
+ * V7 to V8
+ * --------
+ * - Changed my e-mail address
+ * - More 802.11 support (nickname, rate, rts, frag)
+ * - List index in frequencies
+ *
+ * V8 to V9
+ * --------
+ * - Support for 'mode of operation' (ad-hoc, managed...)
+ * - Support for unicast and multicast power saving
+ * - Change encoding to support larger tokens (>64 bits)
+ * - Updated iw_params (disable, flags) and use it for NWID
+ * - Extracted iw_point from iwreq for clarity
+ *
+ * V9 to V10
+ * ---------
+ * - Add PM capability to range structure
+ * - Add PM modifier : MAX/MIN/RELATIVE
+ * - Add encoding option : IW_ENCODE_NOKEY
+ * - Add TxPower ioctls (work like TxRate)
+ *
+ * V10 to V11
+ * ----------
+ * - Add WE version in range (help backward/forward compatibility)
+ * - Add retry ioctls (work like PM)
+ *
+ * V11 to V12
+ * ----------
+ * - Add SIOCSIWSTATS to get /proc/net/wireless programatically
+ * - Add DEV PRIVATE IOCTL to avoid collisions in SIOCDEVPRIVATE space
+ * - Add new statistics (frag, retry, beacon)
+ * - Add average quality (for user space calibration)
+ *
+ * V12 to V13
+ * ----------
+ * - Document creation of new driver API.
+ * - Extract union iwreq_data from struct iwreq (for new driver API).
+ * - Rename SIOCSIWNAME as SIOCSIWCOMMIT
+ *
+ * V13 to V14
+ * ----------
+ * - Wireless Events support : define struct iw_event
+ * - Define additional specific event numbers
+ * - Add "addr" and "param" fields in union iwreq_data
+ * - AP scanning stuff (SIOCSIWSCAN and friends)
+ *
+ * V14 to V15
+ * ----------
+ * - Add IW_PRIV_TYPE_ADDR for struct sockaddr private arg
+ * - Make struct iw_freq signed (both m & e), add explicit padding
+ * - Add IWEVCUSTOM for driver specific event/scanning token
+ * - Add IW_MAX_GET_SPY for driver returning a lot of addresses
+ * - Add IW_TXPOW_RANGE for range of Tx Powers
+ * - Add IWEVREGISTERED & IWEVEXPIRED events for Access Points
+ * - Add IW_MODE_MONITOR for passive monitor
+ *
+ * V15 to V16
+ * ----------
+ * - Increase the number of bitrates in iw_range to 32 (for 802.11g)
+ * - Increase the number of frequencies in iw_range to 32 (for 802.11b+a)
+ * - Reshuffle struct iw_range for increases, add filler
+ * - Increase IW_MAX_AP to 64 for driver returning a lot of addresses
+ * - Remove IW_MAX_GET_SPY because conflict with enhanced spy support
+ * - Add SIOCSIWTHRSPY/SIOCGIWTHRSPY and "struct iw_thrspy"
+ * - Add IW_ENCODE_TEMP and iw_range->encoding_login_index
+ *
+ * V16 to V17
+ * ----------
+ * - Add flags to frequency -> auto/fixed
+ * - Document (struct iw_quality *)->updated, add new flags (INVALID)
+ * - Wireless Event capability in struct iw_range
+ * - Add support for relative TxPower (yick !)
+ *
+ * V17 to V18 (From Jouni Malinen <j@w1.fi>)
+ * ----------
+ * - Add support for WPA/WPA2
+ * - Add extended encoding configuration (SIOCSIWENCODEEXT and
+ * SIOCGIWENCODEEXT)
+ * - Add SIOCSIWGENIE/SIOCGIWGENIE
+ * - Add SIOCSIWMLME
+ * - Add SIOCSIWPMKSA
+ * - Add struct iw_range bit field for supported encoding capabilities
+ * - Add optional scan request parameters for SIOCSIWSCAN
+ * - Add SIOCSIWAUTH/SIOCGIWAUTH for setting authentication and WPA
+ * related parameters (extensible up to 4096 parameter values)
+ * - Add wireless events: IWEVGENIE, IWEVMICHAELMICFAILURE,
+ * IWEVASSOCREQIE, IWEVASSOCRESPIE, IWEVPMKIDCAND
+ *
+ * V18 to V19
+ * ----------
+ * - Remove (struct iw_point *)->pointer from events and streams
+ * - Remove header includes to help user space
+ * - Increase IW_ENCODING_TOKEN_MAX from 32 to 64
+ * - Add IW_QUAL_ALL_UPDATED and IW_QUAL_ALL_INVALID macros
+ * - Add explicit flag to tell stats are in dBm : IW_QUAL_DBM
+ * - Add IW_IOCTL_IDX() and IW_EVENT_IDX() macros
+ *
+ * V19 to V20
+ * ----------
+ * - RtNetlink requests support (SET/GET)
+ *
+ * V20 to V21
+ * ----------
+ * - Remove (struct net_device *)->get_wireless_stats()
+ * - Change length in ESSID and NICK to strlen() instead of strlen()+1
+ * - Add IW_RETRY_SHORT/IW_RETRY_LONG retry modifiers
+ * - Power/Retry relative values no longer * 100000
+ * - Add explicit flag to tell stats are in 802.11k RCPI : IW_QUAL_RCPI
+ *
+ * V21 to V22
+ * ----------
+ * - Prevent leaking of kernel space in stream on 64 bits.
+ */
+
+/**************************** CONSTANTS ****************************/
+
+/* -------------------------- IOCTL LIST -------------------------- */
+
+/* Wireless Identification */
+#define SIOCSIWCOMMIT 0x8B00 /* Commit pending changes to driver */
+#define SIOCGIWNAME 0x8B01 /* get name == wireless protocol */
+/* SIOCGIWNAME is used to verify the presence of Wireless Extensions.
+ * Common values : "IEEE 802.11-DS", "IEEE 802.11-FH", "IEEE 802.11b"...
+ * Don't put the name of your driver there, it's useless. */
+
+/* Basic operations */
+#define SIOCSIWNWID 0x8B02 /* set network id (pre-802.11) */
+#define SIOCGIWNWID 0x8B03 /* get network id (the cell) */
+#define SIOCSIWFREQ 0x8B04 /* set channel/frequency (Hz) */
+#define SIOCGIWFREQ 0x8B05 /* get channel/frequency (Hz) */
+#define SIOCSIWMODE 0x8B06 /* set operation mode */
+#define SIOCGIWMODE 0x8B07 /* get operation mode */
+#define SIOCSIWSENS 0x8B08 /* set sensitivity (dBm) */
+#define SIOCGIWSENS 0x8B09 /* get sensitivity (dBm) */
+
+/* Informative stuff */
+#define SIOCSIWRANGE 0x8B0A /* Unused */
+#define SIOCGIWRANGE 0x8B0B /* Get range of parameters */
+#define SIOCSIWPRIV 0x8B0C /* Unused */
+#define SIOCGIWPRIV 0x8B0D /* get private ioctl interface info */
+#define SIOCSIWSTATS 0x8B0E /* Unused */
+#define SIOCGIWSTATS 0x8B0F /* Get /proc/net/wireless stats */
+/* SIOCGIWSTATS is strictly used between user space and the kernel, and
+ * is never passed to the driver (i.e. the driver will never see it). */
+
+/* Spy support (statistics per MAC address - used for Mobile IP support) */
+#define SIOCSIWSPY 0x8B10 /* set spy addresses */
+#define SIOCGIWSPY 0x8B11 /* get spy info (quality of link) */
+#define SIOCSIWTHRSPY 0x8B12 /* set spy threshold (spy event) */
+#define SIOCGIWTHRSPY 0x8B13 /* get spy threshold */
+
+/* Access Point manipulation */
+#define SIOCSIWAP 0x8B14 /* set access point MAC addresses */
+#define SIOCGIWAP 0x8B15 /* get access point MAC addresses */
+#define SIOCGIWAPLIST 0x8B17 /* Deprecated in favor of scanning */
+#define SIOCSIWSCAN 0x8B18 /* trigger scanning (list cells) */
+#define SIOCGIWSCAN 0x8B19 /* get scanning results */
+
+/* 802.11 specific support */
+#define SIOCSIWESSID 0x8B1A /* set ESSID (network name) */
+#define SIOCGIWESSID 0x8B1B /* get ESSID */
+#define SIOCSIWNICKN 0x8B1C /* set node name/nickname */
+#define SIOCGIWNICKN 0x8B1D /* get node name/nickname */
+/* As the ESSID and NICKN are strings up to 32 bytes long, it doesn't fit
+ * within the 'iwreq' structure, so we need to use the 'data' member to
+ * point to a string in user space, like it is done for RANGE... */
+
+/* Other parameters useful in 802.11 and some other devices */
+#define SIOCSIWRATE 0x8B20 /* set default bit rate (bps) */
+#define SIOCGIWRATE 0x8B21 /* get default bit rate (bps) */
+#define SIOCSIWRTS 0x8B22 /* set RTS/CTS threshold (bytes) */
+#define SIOCGIWRTS 0x8B23 /* get RTS/CTS threshold (bytes) */
+#define SIOCSIWFRAG 0x8B24 /* set fragmentation thr (bytes) */
+#define SIOCGIWFRAG 0x8B25 /* get fragmentation thr (bytes) */
+#define SIOCSIWTXPOW 0x8B26 /* set transmit power (dBm) */
+#define SIOCGIWTXPOW 0x8B27 /* get transmit power (dBm) */
+#define SIOCSIWRETRY 0x8B28 /* set retry limits and lifetime */
+#define SIOCGIWRETRY 0x8B29 /* get retry limits and lifetime */
+
+/* Encoding stuff (scrambling, hardware security, WEP...) */
+#define SIOCSIWENCODE 0x8B2A /* set encoding token & mode */
+#define SIOCGIWENCODE 0x8B2B /* get encoding token & mode */
+/* Power saving stuff (power management, unicast and multicast) */
+#define SIOCSIWPOWER 0x8B2C /* set Power Management settings */
+#define SIOCGIWPOWER 0x8B2D /* get Power Management settings */
+
+/* WPA : Generic IEEE 802.11 informatiom element (e.g., for WPA/RSN/WMM).
+ * This ioctl uses struct iw_point and data buffer that includes IE id and len
+ * fields. More than one IE may be included in the request. Setting the generic
+ * IE to empty buffer (len=0) removes the generic IE from the driver. Drivers
+ * are allowed to generate their own WPA/RSN IEs, but in these cases, drivers
+ * are required to report the used IE as a wireless event, e.g., when
+ * associating with an AP. */
+#define SIOCSIWGENIE 0x8B30 /* set generic IE */
+#define SIOCGIWGENIE 0x8B31 /* get generic IE */
+
+/* WPA : IEEE 802.11 MLME requests */
+#define SIOCSIWMLME 0x8B16 /* request MLME operation; uses
+ * struct iw_mlme */
+/* WPA : Authentication mode parameters */
+#define SIOCSIWAUTH 0x8B32 /* set authentication mode params */
+#define SIOCGIWAUTH 0x8B33 /* get authentication mode params */
+
+/* WPA : Extended version of encoding configuration */
+#define SIOCSIWENCODEEXT 0x8B34 /* set encoding token & mode */
+#define SIOCGIWENCODEEXT 0x8B35 /* get encoding token & mode */
+
+/* WPA2 : PMKSA cache management */
+#define SIOCSIWPMKSA 0x8B36 /* PMKSA cache operation */
+
+/* -------------------- DEV PRIVATE IOCTL LIST -------------------- */
+
+/* These 32 ioctl are wireless device private, for 16 commands.
+ * Each driver is free to use them for whatever purpose it chooses,
+ * however the driver *must* export the description of those ioctls
+ * with SIOCGIWPRIV and *must* use arguments as defined below.
+ * If you don't follow those rules, DaveM is going to hate you (reason :
+ * it make mixed 32/64bit operation impossible).
+ */
+#define SIOCIWFIRSTPRIV 0x8BE0
+#define SIOCIWLASTPRIV 0x8BFF
+/* Previously, we were using SIOCDEVPRIVATE, but we now have our
+ * separate range because of collisions with other tools such as
+ * 'mii-tool'.
+ * We now have 32 commands, so a bit more space ;-).
+ * Also, all 'even' commands are only usable by root and don't return the
+ * content of ifr/iwr to user (but you are not obliged to use the set/get
+ * convention, just use every other two command). More details in iwpriv.c.
+ * And I repeat : you are not forced to use them with iwpriv, but you
+ * must be compliant with it.
+ */
+
+/* ------------------------- IOCTL STUFF ------------------------- */
+
+/* The first and the last (range) */
+#define SIOCIWFIRST 0x8B00
+#define SIOCIWLAST SIOCIWLASTPRIV /* 0x8BFF */
+#define IW_IOCTL_IDX(cmd) ((cmd) - SIOCIWFIRST)
+#define IW_HANDLER(id, func) \
+ [IW_IOCTL_IDX(id)] = func
+
+/* Odd : get (world access), even : set (root access) */
+#define IW_IS_SET(cmd) (!((cmd) & 0x1))
+#define IW_IS_GET(cmd) ((cmd) & 0x1)
+
+/* ----------------------- WIRELESS EVENTS ----------------------- */
+/* Those are *NOT* ioctls, do not issue request on them !!! */
+/* Most events use the same identifier as ioctl requests */
+
+#define IWEVTXDROP 0x8C00 /* Packet dropped to excessive retry */
+#define IWEVQUAL 0x8C01 /* Quality part of statistics (scan) */
+#define IWEVCUSTOM 0x8C02 /* Driver specific ascii string */
+#define IWEVREGISTERED 0x8C03 /* Discovered a new node (AP mode) */
+#define IWEVEXPIRED 0x8C04 /* Expired a node (AP mode) */
+#define IWEVGENIE 0x8C05 /* Generic IE (WPA, RSN, WMM, ..)
+ * (scan results); This includes id and
+ * length fields. One IWEVGENIE may
+ * contain more than one IE. Scan
+ * results may contain one or more
+ * IWEVGENIE events. */
+#define IWEVMICHAELMICFAILURE 0x8C06 /* Michael MIC failure
+ * (struct iw_michaelmicfailure)
+ */
+#define IWEVASSOCREQIE 0x8C07 /* IEs used in (Re)Association Request.
+ * The data includes id and length
+ * fields and may contain more than one
+ * IE. This event is required in
+ * Managed mode if the driver
+ * generates its own WPA/RSN IE. This
+ * should be sent just before
+ * IWEVREGISTERED event for the
+ * association. */
+#define IWEVASSOCRESPIE 0x8C08 /* IEs used in (Re)Association
+ * Response. The data includes id and
+ * length fields and may contain more
+ * than one IE. This may be sent
+ * between IWEVASSOCREQIE and
+ * IWEVREGISTERED events for the
+ * association. */
+#define IWEVPMKIDCAND 0x8C09 /* PMKID candidate for RSN
+ * pre-authentication
+ * (struct iw_pmkid_cand) */
+
+#define IWEVFIRST 0x8C00
+#define IW_EVENT_IDX(cmd) ((cmd) - IWEVFIRST)
+
+/* ------------------------- PRIVATE INFO ------------------------- */
+/*
+ * The following is used with SIOCGIWPRIV. It allow a driver to define
+ * the interface (name, type of data) for its private ioctl.
+ * Privates ioctl are SIOCIWFIRSTPRIV -> SIOCIWLASTPRIV
+ */
+
+#define IW_PRIV_TYPE_MASK 0x7000 /* Type of arguments */
+#define IW_PRIV_TYPE_NONE 0x0000
+#define IW_PRIV_TYPE_BYTE 0x1000 /* Char as number */
+#define IW_PRIV_TYPE_CHAR 0x2000 /* Char as character */
+#define IW_PRIV_TYPE_INT 0x4000 /* 32 bits int */
+#define IW_PRIV_TYPE_FLOAT 0x5000 /* struct iw_freq */
+#define IW_PRIV_TYPE_ADDR 0x6000 /* struct sockaddr */
+
+#define IW_PRIV_SIZE_FIXED 0x0800 /* Variable or fixed number of args */
+
+#define IW_PRIV_SIZE_MASK 0x07FF /* Max number of those args */
+
+/*
+ * Note : if the number of args is fixed and the size < 16 octets,
+ * instead of passing a pointer we will put args in the iwreq struct...
+ */
+
+/* ----------------------- OTHER CONSTANTS ----------------------- */
+
+/* Maximum frequencies in the range struct */
+#define IW_MAX_FREQUENCIES 32
+/* Note : if you have something like 80 frequencies,
+ * don't increase this constant and don't fill the frequency list.
+ * The user will be able to set by channel anyway... */
+
+/* Maximum bit rates in the range struct */
+#define IW_MAX_BITRATES 32
+
+/* Maximum tx powers in the range struct */
+#define IW_MAX_TXPOWER 8
+/* Note : if you more than 8 TXPowers, just set the max and min or
+ * a few of them in the struct iw_range. */
+
+/* Maximum of address that you may set with SPY */
+#define IW_MAX_SPY 8
+
+/* Maximum of address that you may get in the
+ list of access points in range */
+#define IW_MAX_AP 64
+
+/* Maximum size of the ESSID and NICKN strings */
+#define IW_ESSID_MAX_SIZE 32
+
+/* Modes of operation */
+#define IW_MODE_AUTO 0 /* Let the driver decides */
+#define IW_MODE_ADHOC 1 /* Single cell network */
+#define IW_MODE_INFRA 2 /* Multi cell network, roaming, ... */
+#define IW_MODE_MASTER 3 /* Synchronisation master or Access Point */
+#define IW_MODE_REPEAT 4 /* Wireless Repeater (forwarder) */
+#define IW_MODE_SECOND 5 /* Secondary master/repeater (backup) */
+#define IW_MODE_MONITOR 6 /* Passive monitor (listen only) */
+#define IW_MODE_MESH 7 /* Mesh (IEEE 802.11s) network */
+
+/* Statistics flags (bitmask in updated) */
+#define IW_QUAL_QUAL_UPDATED 0x01 /* Value was updated since last read */
+#define IW_QUAL_LEVEL_UPDATED 0x02
+#define IW_QUAL_NOISE_UPDATED 0x04
+#define IW_QUAL_ALL_UPDATED 0x07
+#define IW_QUAL_DBM 0x08 /* Level + Noise are dBm */
+#define IW_QUAL_QUAL_INVALID 0x10 /* Driver doesn't provide value */
+#define IW_QUAL_LEVEL_INVALID 0x20
+#define IW_QUAL_NOISE_INVALID 0x40
+#define IW_QUAL_RCPI 0x80 /* Level + Noise are 802.11k RCPI */
+#define IW_QUAL_ALL_INVALID 0x70
+
+/* Frequency flags */
+#define IW_FREQ_AUTO 0x00 /* Let the driver decides */
+#define IW_FREQ_FIXED 0x01 /* Force a specific value */
+
+/* Maximum number of size of encoding token available
+ * they are listed in the range structure */
+#define IW_MAX_ENCODING_SIZES 8
+
+/* Maximum size of the encoding token in bytes */
+#define IW_ENCODING_TOKEN_MAX 64 /* 512 bits (for now) */
+
+/* Flags for encoding (along with the token) */
+#define IW_ENCODE_INDEX 0x00FF /* Token index (if needed) */
+#define IW_ENCODE_FLAGS 0xFF00 /* Flags defined below */
+#define IW_ENCODE_MODE 0xF000 /* Modes defined below */
+#define IW_ENCODE_DISABLED 0x8000 /* Encoding disabled */
+#define IW_ENCODE_ENABLED 0x0000 /* Encoding enabled */
+#define IW_ENCODE_RESTRICTED 0x4000 /* Refuse non-encoded packets */
+#define IW_ENCODE_OPEN 0x2000 /* Accept non-encoded packets */
+#define IW_ENCODE_NOKEY 0x0800 /* Key is write only, so not present */
+#define IW_ENCODE_TEMP 0x0400 /* Temporary key */
+
+/* Power management flags available (along with the value, if any) */
+#define IW_POWER_ON 0x0000 /* No details... */
+#define IW_POWER_TYPE 0xF000 /* Type of parameter */
+#define IW_POWER_PERIOD 0x1000 /* Value is a period/duration of */
+#define IW_POWER_TIMEOUT 0x2000 /* Value is a timeout (to go asleep) */
+#define IW_POWER_MODE 0x0F00 /* Power Management mode */
+#define IW_POWER_UNICAST_R 0x0100 /* Receive only unicast messages */
+#define IW_POWER_MULTICAST_R 0x0200 /* Receive only multicast messages */
+#define IW_POWER_ALL_R 0x0300 /* Receive all messages though PM */
+#define IW_POWER_FORCE_S 0x0400 /* Force PM procedure for sending unicast */
+#define IW_POWER_REPEATER 0x0800 /* Repeat broadcast messages in PM period */
+#define IW_POWER_MODIFIER 0x000F /* Modify a parameter */
+#define IW_POWER_MIN 0x0001 /* Value is a minimum */
+#define IW_POWER_MAX 0x0002 /* Value is a maximum */
+#define IW_POWER_RELATIVE 0x0004 /* Value is not in seconds/ms/us */
+
+/* Transmit Power flags available */
+#define IW_TXPOW_TYPE 0x00FF /* Type of value */
+#define IW_TXPOW_DBM 0x0000 /* Value is in dBm */
+#define IW_TXPOW_MWATT 0x0001 /* Value is in mW */
+#define IW_TXPOW_RELATIVE 0x0002 /* Value is in arbitrary units */
+#define IW_TXPOW_RANGE 0x1000 /* Range of value between min/max */
+
+/* Retry limits and lifetime flags available */
+#define IW_RETRY_ON 0x0000 /* No details... */
+#define IW_RETRY_TYPE 0xF000 /* Type of parameter */
+#define IW_RETRY_LIMIT 0x1000 /* Maximum number of retries*/
+#define IW_RETRY_LIFETIME 0x2000 /* Maximum duration of retries in us */
+#define IW_RETRY_MODIFIER 0x00FF /* Modify a parameter */
+#define IW_RETRY_MIN 0x0001 /* Value is a minimum */
+#define IW_RETRY_MAX 0x0002 /* Value is a maximum */
+#define IW_RETRY_RELATIVE 0x0004 /* Value is not in seconds/ms/us */
+#define IW_RETRY_SHORT 0x0010 /* Value is for short packets */
+#define IW_RETRY_LONG 0x0020 /* Value is for long packets */
+
+/* Scanning request flags */
+#define IW_SCAN_DEFAULT 0x0000 /* Default scan of the driver */
+#define IW_SCAN_ALL_ESSID 0x0001 /* Scan all ESSIDs */
+#define IW_SCAN_THIS_ESSID 0x0002 /* Scan only this ESSID */
+#define IW_SCAN_ALL_FREQ 0x0004 /* Scan all Frequencies */
+#define IW_SCAN_THIS_FREQ 0x0008 /* Scan only this Frequency */
+#define IW_SCAN_ALL_MODE 0x0010 /* Scan all Modes */
+#define IW_SCAN_THIS_MODE 0x0020 /* Scan only this Mode */
+#define IW_SCAN_ALL_RATE 0x0040 /* Scan all Bit-Rates */
+#define IW_SCAN_THIS_RATE 0x0080 /* Scan only this Bit-Rate */
+/* struct iw_scan_req scan_type */
+#define IW_SCAN_TYPE_ACTIVE 0
+#define IW_SCAN_TYPE_PASSIVE 1
+/* Maximum size of returned data */
+#define IW_SCAN_MAX_DATA 4096 /* In bytes */
+
+/* Scan capability flags - in (struct iw_range *)->scan_capa */
+#define IW_SCAN_CAPA_NONE 0x00
+#define IW_SCAN_CAPA_ESSID 0x01
+#define IW_SCAN_CAPA_BSSID 0x02
+#define IW_SCAN_CAPA_CHANNEL 0x04
+#define IW_SCAN_CAPA_MODE 0x08
+#define IW_SCAN_CAPA_RATE 0x10
+#define IW_SCAN_CAPA_TYPE 0x20
+#define IW_SCAN_CAPA_TIME 0x40
+
+/* Max number of char in custom event - use multiple of them if needed */
+#define IW_CUSTOM_MAX 256 /* In bytes */
+
+/* Generic information element */
+#define IW_GENERIC_IE_MAX 1024
+
+/* MLME requests (SIOCSIWMLME / struct iw_mlme) */
+#define IW_MLME_DEAUTH 0
+#define IW_MLME_DISASSOC 1
+#define IW_MLME_AUTH 2
+#define IW_MLME_ASSOC 3
+
+/* SIOCSIWAUTH/SIOCGIWAUTH struct iw_param flags */
+#define IW_AUTH_INDEX 0x0FFF
+#define IW_AUTH_FLAGS 0xF000
+/* SIOCSIWAUTH/SIOCGIWAUTH parameters (0 .. 4095)
+ * (IW_AUTH_INDEX mask in struct iw_param flags; this is the index of the
+ * parameter that is being set/get to; value will be read/written to
+ * struct iw_param value field) */
+#define IW_AUTH_WPA_VERSION 0
+#define IW_AUTH_CIPHER_PAIRWISE 1
+#define IW_AUTH_CIPHER_GROUP 2
+#define IW_AUTH_KEY_MGMT 3
+#define IW_AUTH_TKIP_COUNTERMEASURES 4
+#define IW_AUTH_DROP_UNENCRYPTED 5
+#define IW_AUTH_80211_AUTH_ALG 6
+#define IW_AUTH_WPA_ENABLED 7
+#define IW_AUTH_RX_UNENCRYPTED_EAPOL 8
+#define IW_AUTH_ROAMING_CONTROL 9
+#define IW_AUTH_PRIVACY_INVOKED 10
+#define IW_AUTH_CIPHER_GROUP_MGMT 11
+#define IW_AUTH_MFP 12
+
+/* IW_AUTH_WPA_VERSION values (bit field) */
+#define IW_AUTH_WPA_VERSION_DISABLED 0x00000001
+#define IW_AUTH_WPA_VERSION_WPA 0x00000002
+#define IW_AUTH_WPA_VERSION_WPA2 0x00000004
+
+/* IW_AUTH_PAIRWISE_CIPHER, IW_AUTH_GROUP_CIPHER, and IW_AUTH_CIPHER_GROUP_MGMT
+ * values (bit field) */
+#define IW_AUTH_CIPHER_NONE 0x00000001
+#define IW_AUTH_CIPHER_WEP40 0x00000002
+#define IW_AUTH_CIPHER_TKIP 0x00000004
+#define IW_AUTH_CIPHER_CCMP 0x00000008
+#define IW_AUTH_CIPHER_WEP104 0x00000010
+#define IW_AUTH_CIPHER_AES_CMAC 0x00000020
+
+/* IW_AUTH_KEY_MGMT values (bit field) */
+#define IW_AUTH_KEY_MGMT_802_1X 1
+#define IW_AUTH_KEY_MGMT_PSK 2
+
+/* IW_AUTH_80211_AUTH_ALG values (bit field) */
+#define IW_AUTH_ALG_OPEN_SYSTEM 0x00000001
+#define IW_AUTH_ALG_SHARED_KEY 0x00000002
+#define IW_AUTH_ALG_LEAP 0x00000004
+
+/* IW_AUTH_ROAMING_CONTROL values */
+#define IW_AUTH_ROAMING_ENABLE 0 /* driver/firmware based roaming */
+#define IW_AUTH_ROAMING_DISABLE 1 /* user space program used for roaming
+ * control */
+
+/* IW_AUTH_MFP (management frame protection) values */
+#define IW_AUTH_MFP_DISABLED 0 /* MFP disabled */
+#define IW_AUTH_MFP_OPTIONAL 1 /* MFP optional */
+#define IW_AUTH_MFP_REQUIRED 2 /* MFP required */
+
+/* SIOCSIWENCODEEXT definitions */
+#define IW_ENCODE_SEQ_MAX_SIZE 8
+/* struct iw_encode_ext ->alg */
+#define IW_ENCODE_ALG_NONE 0
+#define IW_ENCODE_ALG_WEP 1
+#define IW_ENCODE_ALG_TKIP 2
+#define IW_ENCODE_ALG_CCMP 3
+#define IW_ENCODE_ALG_PMK 4
+#define IW_ENCODE_ALG_AES_CMAC 5
+/* struct iw_encode_ext ->ext_flags */
+#define IW_ENCODE_EXT_TX_SEQ_VALID 0x00000001
+#define IW_ENCODE_EXT_RX_SEQ_VALID 0x00000002
+#define IW_ENCODE_EXT_GROUP_KEY 0x00000004
+#define IW_ENCODE_EXT_SET_TX_KEY 0x00000008
+
+/* IWEVMICHAELMICFAILURE : struct iw_michaelmicfailure ->flags */
+#define IW_MICFAILURE_KEY_ID 0x00000003 /* Key ID 0..3 */
+#define IW_MICFAILURE_GROUP 0x00000004
+#define IW_MICFAILURE_PAIRWISE 0x00000008
+#define IW_MICFAILURE_STAKEY 0x00000010
+#define IW_MICFAILURE_COUNT 0x00000060 /* 1 or 2 (0 = count not supported)
+ */
+
+/* Bit field values for enc_capa in struct iw_range */
+#define IW_ENC_CAPA_WPA 0x00000001
+#define IW_ENC_CAPA_WPA2 0x00000002
+#define IW_ENC_CAPA_CIPHER_TKIP 0x00000004
+#define IW_ENC_CAPA_CIPHER_CCMP 0x00000008
+#define IW_ENC_CAPA_4WAY_HANDSHAKE 0x00000010
+
+/* Event capability macros - in (struct iw_range *)->event_capa
+ * Because we have more than 32 possible events, we use an array of
+ * 32 bit bitmasks. Note : 32 bits = 0x20 = 2^5. */
+#define IW_EVENT_CAPA_BASE(cmd) ((cmd >= SIOCIWFIRSTPRIV) ? \
+ (cmd - SIOCIWFIRSTPRIV + 0x60) : \
+ (cmd - SIOCIWFIRST))
+#define IW_EVENT_CAPA_INDEX(cmd) (IW_EVENT_CAPA_BASE(cmd) >> 5)
+#define IW_EVENT_CAPA_MASK(cmd) (1 << (IW_EVENT_CAPA_BASE(cmd) & 0x1F))
+/* Event capability constants - event autogenerated by the kernel
+ * This list is valid for most 802.11 devices, customise as needed... */
+#define IW_EVENT_CAPA_K_0 (IW_EVENT_CAPA_MASK(0x8B04) | \
+ IW_EVENT_CAPA_MASK(0x8B06) | \
+ IW_EVENT_CAPA_MASK(0x8B1A))
+#define IW_EVENT_CAPA_K_1 (IW_EVENT_CAPA_MASK(0x8B2A))
+/* "Easy" macro to set events in iw_range (less efficient) */
+#define IW_EVENT_CAPA_SET(event_capa, cmd) (event_capa[IW_EVENT_CAPA_INDEX(cmd)] |= IW_EVENT_CAPA_MASK(cmd))
+#define IW_EVENT_CAPA_SET_KERNEL(event_capa) {event_capa[0] |= IW_EVENT_CAPA_K_0; event_capa[1] |= IW_EVENT_CAPA_K_1; }
+
+
+/****************************** TYPES ******************************/
+
+/* --------------------------- SUBTYPES --------------------------- */
+/*
+ * Generic format for most parameters that fit in an int
+ */
+struct iw_param
+{
+ __s32 value; /* The value of the parameter itself */
+ __u8 fixed; /* Hardware should not use auto select */
+ __u8 disabled; /* Disable the feature */
+ __u16 flags; /* Various specifc flags (if any) */
+};
+
+/*
+ * For all data larger than 16 octets, we need to use a
+ * pointer to memory allocated in user space.
+ */
+struct iw_point
+{
+ void __user *pointer; /* Pointer to the data (in user space) */
+ __u16 length; /* number of fields or size in bytes */
+ __u16 flags; /* Optional params */
+};
+
+
+/*
+ * A frequency
+ * For numbers lower than 10^9, we encode the number in 'm' and
+ * set 'e' to 0
+ * For number greater than 10^9, we divide it by the lowest power
+ * of 10 to get 'm' lower than 10^9, with 'm'= f / (10^'e')...
+ * The power of 10 is in 'e', the result of the division is in 'm'.
+ */
+struct iw_freq
+{
+ __s32 m; /* Mantissa */
+ __s16 e; /* Exponent */
+ __u8 i; /* List index (when in range struct) */
+ __u8 flags; /* Flags (fixed/auto) */
+};
+
+/*
+ * Quality of the link
+ */
+struct iw_quality
+{
+ __u8 qual; /* link quality (%retries, SNR,
+ %missed beacons or better...) */
+ __u8 level; /* signal level (dBm) */
+ __u8 noise; /* noise level (dBm) */
+ __u8 updated; /* Flags to know if updated */
+};
+
+/*
+ * Packet discarded in the wireless adapter due to
+ * "wireless" specific problems...
+ * Note : the list of counter and statistics in net_device_stats
+ * is already pretty exhaustive, and you should use that first.
+ * This is only additional stats...
+ */
+struct iw_discarded
+{
+ __u32 nwid; /* Rx : Wrong nwid/essid */
+ __u32 code; /* Rx : Unable to code/decode (WEP) */
+ __u32 fragment; /* Rx : Can't perform MAC reassembly */
+ __u32 retries; /* Tx : Max MAC retries num reached */
+ __u32 misc; /* Others cases */
+};
+
+/*
+ * Packet/Time period missed in the wireless adapter due to
+ * "wireless" specific problems...
+ */
+struct iw_missed
+{
+ __u32 beacon; /* Missed beacons/superframe */
+};
+
+/*
+ * Quality range (for spy threshold)
+ */
+struct iw_thrspy
+{
+ struct sockaddr addr; /* Source address (hw/mac) */
+ struct iw_quality qual; /* Quality of the link */
+ struct iw_quality low; /* Low threshold */
+ struct iw_quality high; /* High threshold */
+};
+
+/*
+ * Optional data for scan request
+ *
+ * Note: these optional parameters are controlling parameters for the
+ * scanning behavior, these do not apply to getting scan results
+ * (SIOCGIWSCAN). Drivers are expected to keep a local BSS table and
+ * provide a merged results with all BSSes even if the previous scan
+ * request limited scanning to a subset, e.g., by specifying an SSID.
+ * Especially, scan results are required to include an entry for the
+ * current BSS if the driver is in Managed mode and associated with an AP.
+ */
+struct iw_scan_req
+{
+ __u8 scan_type; /* IW_SCAN_TYPE_{ACTIVE,PASSIVE} */
+ __u8 essid_len;
+ __u8 num_channels; /* num entries in channel_list;
+ * 0 = scan all allowed channels */
+ __u8 flags; /* reserved as padding; use zero, this may
+ * be used in the future for adding flags
+ * to request different scan behavior */
+ struct sockaddr bssid; /* ff:ff:ff:ff:ff:ff for broadcast BSSID or
+ * individual address of a specific BSS */
+
+ /*
+ * Use this ESSID if IW_SCAN_THIS_ESSID flag is used instead of using
+ * the current ESSID. This allows scan requests for specific ESSID
+ * without having to change the current ESSID and potentially breaking
+ * the current association.
+ */
+ __u8 essid[IW_ESSID_MAX_SIZE];
+
+ /*
+ * Optional parameters for changing the default scanning behavior.
+ * These are based on the MLME-SCAN.request from IEEE Std 802.11.
+ * TU is 1.024 ms. If these are set to 0, driver is expected to use
+ * reasonable default values. min_channel_time defines the time that
+ * will be used to wait for the first reply on each channel. If no
+ * replies are received, next channel will be scanned after this. If
+ * replies are received, total time waited on the channel is defined by
+ * max_channel_time.
+ */
+ __u32 min_channel_time; /* in TU */
+ __u32 max_channel_time; /* in TU */
+
+ struct iw_freq channel_list[IW_MAX_FREQUENCIES];
+};
+
+/* ------------------------- WPA SUPPORT ------------------------- */
+
+/*
+ * Extended data structure for get/set encoding (this is used with
+ * SIOCSIWENCODEEXT/SIOCGIWENCODEEXT. struct iw_point and IW_ENCODE_*
+ * flags are used in the same way as with SIOCSIWENCODE/SIOCGIWENCODE and
+ * only the data contents changes (key data -> this structure, including
+ * key data).
+ *
+ * If the new key is the first group key, it will be set as the default
+ * TX key. Otherwise, default TX key index is only changed if
+ * IW_ENCODE_EXT_SET_TX_KEY flag is set.
+ *
+ * Key will be changed with SIOCSIWENCODEEXT in all cases except for
+ * special "change TX key index" operation which is indicated by setting
+ * key_len = 0 and ext_flags |= IW_ENCODE_EXT_SET_TX_KEY.
+ *
+ * tx_seq/rx_seq are only used when respective
+ * IW_ENCODE_EXT_{TX,RX}_SEQ_VALID flag is set in ext_flags. Normal
+ * TKIP/CCMP operation is to set RX seq with SIOCSIWENCODEEXT and start
+ * TX seq from zero whenever key is changed. SIOCGIWENCODEEXT is normally
+ * used only by an Authenticator (AP or an IBSS station) to get the
+ * current TX sequence number. Using TX_SEQ_VALID for SIOCSIWENCODEEXT and
+ * RX_SEQ_VALID for SIOCGIWENCODEEXT are optional, but can be useful for
+ * debugging/testing.
+ */
+struct iw_encode_ext
+{
+ __u32 ext_flags; /* IW_ENCODE_EXT_* */
+ __u8 tx_seq[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */
+ __u8 rx_seq[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */
+ struct sockaddr addr; /* ff:ff:ff:ff:ff:ff for broadcast/multicast
+ * (group) keys or unicast address for
+ * individual keys */
+ __u16 alg; /* IW_ENCODE_ALG_* */
+ __u16 key_len;
+ __u8 key[0];
+};
+
+/* SIOCSIWMLME data */
+struct iw_mlme
+{
+ __u16 cmd; /* IW_MLME_* */
+ __u16 reason_code;
+ struct sockaddr addr;
+};
+
+/* SIOCSIWPMKSA data */
+#define IW_PMKSA_ADD 1
+#define IW_PMKSA_REMOVE 2
+#define IW_PMKSA_FLUSH 3
+
+#define IW_PMKID_LEN 16
+
+struct iw_pmksa
+{
+ __u32 cmd; /* IW_PMKSA_* */
+ struct sockaddr bssid;
+ __u8 pmkid[IW_PMKID_LEN];
+};
+
+/* IWEVMICHAELMICFAILURE data */
+struct iw_michaelmicfailure
+{
+ __u32 flags;
+ struct sockaddr src_addr;
+ __u8 tsc[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */
+};
+
+/* IWEVPMKIDCAND data */
+#define IW_PMKID_CAND_PREAUTH 0x00000001 /* RNS pre-authentication enabled */
+struct iw_pmkid_cand
+{
+ __u32 flags; /* IW_PMKID_CAND_* */
+ __u32 index; /* the smaller the index, the higher the
+ * priority */
+ struct sockaddr bssid;
+};
+
+/* ------------------------ WIRELESS STATS ------------------------ */
+/*
+ * Wireless statistics (used for /proc/net/wireless)
+ */
+struct iw_statistics
+{
+ __u16 status; /* Status
+ * - device dependent for now */
+
+ struct iw_quality qual; /* Quality of the link
+ * (instant/mean/max) */
+ struct iw_discarded discard; /* Packet discarded counts */
+ struct iw_missed miss; /* Packet missed counts */
+};
+
+/* ------------------------ IOCTL REQUEST ------------------------ */
+/*
+ * This structure defines the payload of an ioctl, and is used
+ * below.
+ *
+ * Note that this structure should fit on the memory footprint
+ * of iwreq (which is the same as ifreq), which mean a max size of
+ * 16 octets = 128 bits. Warning, pointers might be 64 bits wide...
+ * You should check this when increasing the structures defined
+ * above in this file...
+ */
+union iwreq_data
+{
+ /* Config - generic */
+ char name[IFNAMSIZ];
+ /* Name : used to verify the presence of wireless extensions.
+ * Name of the protocol/provider... */
+
+ struct iw_point essid; /* Extended network name */
+ struct iw_param nwid; /* network id (or domain - the cell) */
+ struct iw_freq freq; /* frequency or channel :
+ * 0-1000 = channel
+ * > 1000 = frequency in Hz */
+
+ struct iw_param sens; /* signal level threshold */
+ struct iw_param bitrate; /* default bit rate */
+ struct iw_param txpower; /* default transmit power */
+ struct iw_param rts; /* RTS threshold threshold */
+ struct iw_param frag; /* Fragmentation threshold */
+ __u32 mode; /* Operation mode */
+ struct iw_param retry; /* Retry limits & lifetime */
+
+ struct iw_point encoding; /* Encoding stuff : tokens */
+ struct iw_param power; /* PM duration/timeout */
+ struct iw_quality qual; /* Quality part of statistics */
+
+ struct sockaddr ap_addr; /* Access point address */
+ struct sockaddr addr; /* Destination address (hw/mac) */
+
+ struct iw_param param; /* Other small parameters */
+ struct iw_point data; /* Other large parameters */
+};
+
+/*
+ * The structure to exchange data for ioctl.
+ * This structure is the same as 'struct ifreq', but (re)defined for
+ * convenience...
+ * Do I need to remind you about structure size (32 octets) ?
+ */
+struct iwreq
+{
+ union
+ {
+ char ifrn_name[IFNAMSIZ]; /* if name, e.g. "eth0" */
+ } ifr_ifrn;
+
+ /* Data part (defined just above) */
+ union iwreq_data u;
+};
+
+/* -------------------------- IOCTL DATA -------------------------- */
+/*
+ * For those ioctl which want to exchange mode data that what could
+ * fit in the above structure...
+ */
+
+/*
+ * Range of parameters
+ */
+
+struct iw_range
+{
+ /* Informative stuff (to choose between different interface) */
+ __u32 throughput; /* To give an idea... */
+ /* In theory this value should be the maximum benchmarked
+ * TCP/IP throughput, because with most of these devices the
+ * bit rate is meaningless (overhead an co) to estimate how
+ * fast the connection will go and pick the fastest one.
+ * I suggest people to play with Netperf or any benchmark...
+ */
+
+ /* NWID (or domain id) */
+ __u32 min_nwid; /* Minimal NWID we are able to set */
+ __u32 max_nwid; /* Maximal NWID we are able to set */
+
+ /* Old Frequency (backward compat - moved lower ) */
+ __u16 old_num_channels;
+ __u8 old_num_frequency;
+
+ /* Scan capabilities */
+ __u8 scan_capa; /* IW_SCAN_CAPA_* bit field */
+
+ /* Wireless event capability bitmasks */
+ __u32 event_capa[6];
+
+ /* signal level threshold range */
+ __s32 sensitivity;
+
+ /* Quality of link & SNR stuff */
+ /* Quality range (link, level, noise)
+ * If the quality is absolute, it will be in the range [0 ; max_qual],
+ * if the quality is dBm, it will be in the range [max_qual ; 0].
+ * Don't forget that we use 8 bit arithmetics... */
+ struct iw_quality max_qual; /* Quality of the link */
+ /* This should contain the average/typical values of the quality
+ * indicator. This should be the threshold between a "good" and
+ * a "bad" link (example : monitor going from green to orange).
+ * Currently, user space apps like quality monitors don't have any
+ * way to calibrate the measurement. With this, they can split
+ * the range between 0 and max_qual in different quality level
+ * (using a geometric subdivision centered on the average).
+ * I expect that people doing the user space apps will feedback
+ * us on which value we need to put in each driver... */
+ struct iw_quality avg_qual; /* Quality of the link */
+
+ /* Rates */
+ __u8 num_bitrates; /* Number of entries in the list */
+ __s32 bitrate[IW_MAX_BITRATES]; /* list, in bps */
+
+ /* RTS threshold */
+ __s32 min_rts; /* Minimal RTS threshold */
+ __s32 max_rts; /* Maximal RTS threshold */
+
+ /* Frag threshold */
+ __s32 min_frag; /* Minimal frag threshold */
+ __s32 max_frag; /* Maximal frag threshold */
+
+ /* Power Management duration & timeout */
+ __s32 min_pmp; /* Minimal PM period */
+ __s32 max_pmp; /* Maximal PM period */
+ __s32 min_pmt; /* Minimal PM timeout */
+ __s32 max_pmt; /* Maximal PM timeout */
+ __u16 pmp_flags; /* How to decode max/min PM period */
+ __u16 pmt_flags; /* How to decode max/min PM timeout */
+ __u16 pm_capa; /* What PM options are supported */
+
+ /* Encoder stuff */
+ __u16 encoding_size[IW_MAX_ENCODING_SIZES]; /* Different token sizes */
+ __u8 num_encoding_sizes; /* Number of entry in the list */
+ __u8 max_encoding_tokens; /* Max number of tokens */
+ /* For drivers that need a "login/passwd" form */
+ __u8 encoding_login_index; /* token index for login token */
+
+ /* Transmit power */
+ __u16 txpower_capa; /* What options are supported */
+ __u8 num_txpower; /* Number of entries in the list */
+ __s32 txpower[IW_MAX_TXPOWER]; /* list, in bps */
+
+ /* Wireless Extension version info */
+ __u8 we_version_compiled; /* Must be WIRELESS_EXT */
+ __u8 we_version_source; /* Last update of source */
+
+ /* Retry limits and lifetime */
+ __u16 retry_capa; /* What retry options are supported */
+ __u16 retry_flags; /* How to decode max/min retry limit */
+ __u16 r_time_flags; /* How to decode max/min retry life */
+ __s32 min_retry; /* Minimal number of retries */
+ __s32 max_retry; /* Maximal number of retries */
+ __s32 min_r_time; /* Minimal retry lifetime */
+ __s32 max_r_time; /* Maximal retry lifetime */
+
+ /* Frequency */
+ __u16 num_channels; /* Number of channels [0; num - 1] */
+ __u8 num_frequency; /* Number of entry in the list */
+ struct iw_freq freq[IW_MAX_FREQUENCIES]; /* list */
+ /* Note : this frequency list doesn't need to fit channel numbers,
+ * because each entry contain its channel index */
+
+ __u32 enc_capa; /* IW_ENC_CAPA_* bit field */
+};
+
+/*
+ * Private ioctl interface information
+ */
+
+struct iw_priv_args
+{
+ __u32 cmd; /* Number of the ioctl to issue */
+ __u16 set_args; /* Type and number of args */
+ __u16 get_args; /* Type and number of args */
+ char name[IFNAMSIZ]; /* Name of the extension */
+};
+
+/* ----------------------- WIRELESS EVENTS ----------------------- */
+/*
+ * Wireless events are carried through the rtnetlink socket to user
+ * space. They are encapsulated in the IFLA_WIRELESS field of
+ * a RTM_NEWLINK message.
+ */
+
+/*
+ * A Wireless Event. Contains basically the same data as the ioctl...
+ */
+struct iw_event
+{
+ __u16 len; /* Real length of this stuff */
+ __u16 cmd; /* Wireless IOCTL */
+ union iwreq_data u; /* IOCTL fixed payload */
+};
+
+/* Size of the Event prefix (including padding and alignement junk) */
+#define IW_EV_LCP_LEN (sizeof(struct iw_event) - sizeof(union iwreq_data))
+/* Size of the various events */
+#define IW_EV_CHAR_LEN (IW_EV_LCP_LEN + IFNAMSIZ)
+#define IW_EV_UINT_LEN (IW_EV_LCP_LEN + sizeof(__u32))
+#define IW_EV_FREQ_LEN (IW_EV_LCP_LEN + sizeof(struct iw_freq))
+#define IW_EV_PARAM_LEN (IW_EV_LCP_LEN + sizeof(struct iw_param))
+#define IW_EV_ADDR_LEN (IW_EV_LCP_LEN + sizeof(struct sockaddr))
+#define IW_EV_QUAL_LEN (IW_EV_LCP_LEN + sizeof(struct iw_quality))
+
+/* iw_point events are special. First, the payload (extra data) come at
+ * the end of the event, so they are bigger than IW_EV_POINT_LEN. Second,
+ * we omit the pointer, so start at an offset. */
+#define IW_EV_POINT_OFF (((char *) &(((struct iw_point *) NULL)->length)) - \
+ (char *) NULL)
+#define IW_EV_POINT_LEN (IW_EV_LCP_LEN + sizeof(struct iw_point) - \
+ IW_EV_POINT_OFF)
+
+
+/* Size of the Event prefix when packed in stream */
+#define IW_EV_LCP_PK_LEN (4)
+/* Size of the various events when packed in stream */
+#define IW_EV_CHAR_PK_LEN (IW_EV_LCP_PK_LEN + IFNAMSIZ)
+#define IW_EV_UINT_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(__u32))
+#define IW_EV_FREQ_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(struct iw_freq))
+#define IW_EV_PARAM_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(struct iw_param))
+#define IW_EV_ADDR_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(struct sockaddr))
+#define IW_EV_QUAL_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(struct iw_quality))
+#define IW_EV_POINT_PK_LEN (IW_EV_LCP_PK_LEN + 4)
+
+#endif /* _UAPI_LINUX_WIRELESS_H */
diff --git a/include/linux/x25.h b/include/uapi/linux/x25.h
similarity index 100%
rename from include/linux/x25.h
rename to include/uapi/linux/x25.h
diff --git a/include/uapi/linux/xattr.h b/include/uapi/linux/xattr.h
new file mode 100644
index 0000000..26607bd
--- /dev/null
+++ b/include/uapi/linux/xattr.h
@@ -0,0 +1,64 @@
+/*
+ File: linux/xattr.h
+
+ Extended attributes handling.
+
+ Copyright (C) 2001 by Andreas Gruenbacher <a.gruenbacher@computer.org>
+ Copyright (c) 2001-2002 Silicon Graphics, Inc. All Rights Reserved.
+ Copyright (c) 2004 Red Hat, Inc., James Morris <jmorris@redhat.com>
+*/
+#ifndef _UAPI_LINUX_XATTR_H
+#define _UAPI_LINUX_XATTR_H
+
+#define XATTR_CREATE 0x1 /* set value, fail if attr already exists */
+#define XATTR_REPLACE 0x2 /* set value, fail if attr does not exist */
+
+/* Namespaces */
+#define XATTR_OS2_PREFIX "os2."
+#define XATTR_OS2_PREFIX_LEN (sizeof (XATTR_OS2_PREFIX) - 1)
+
+#define XATTR_SECURITY_PREFIX "security."
+#define XATTR_SECURITY_PREFIX_LEN (sizeof (XATTR_SECURITY_PREFIX) - 1)
+
+#define XATTR_SYSTEM_PREFIX "system."
+#define XATTR_SYSTEM_PREFIX_LEN (sizeof (XATTR_SYSTEM_PREFIX) - 1)
+
+#define XATTR_TRUSTED_PREFIX "trusted."
+#define XATTR_TRUSTED_PREFIX_LEN (sizeof (XATTR_TRUSTED_PREFIX) - 1)
+
+#define XATTR_USER_PREFIX "user."
+#define XATTR_USER_PREFIX_LEN (sizeof (XATTR_USER_PREFIX) - 1)
+
+/* Security namespace */
+#define XATTR_EVM_SUFFIX "evm"
+#define XATTR_NAME_EVM XATTR_SECURITY_PREFIX XATTR_EVM_SUFFIX
+
+#define XATTR_IMA_SUFFIX "ima"
+#define XATTR_NAME_IMA XATTR_SECURITY_PREFIX XATTR_IMA_SUFFIX
+
+#define XATTR_SELINUX_SUFFIX "selinux"
+#define XATTR_NAME_SELINUX XATTR_SECURITY_PREFIX XATTR_SELINUX_SUFFIX
+
+#define XATTR_SMACK_SUFFIX "SMACK64"
+#define XATTR_SMACK_IPIN "SMACK64IPIN"
+#define XATTR_SMACK_IPOUT "SMACK64IPOUT"
+#define XATTR_SMACK_EXEC "SMACK64EXEC"
+#define XATTR_SMACK_TRANSMUTE "SMACK64TRANSMUTE"
+#define XATTR_SMACK_MMAP "SMACK64MMAP"
+#define XATTR_NAME_SMACK XATTR_SECURITY_PREFIX XATTR_SMACK_SUFFIX
+#define XATTR_NAME_SMACKIPIN XATTR_SECURITY_PREFIX XATTR_SMACK_IPIN
+#define XATTR_NAME_SMACKIPOUT XATTR_SECURITY_PREFIX XATTR_SMACK_IPOUT
+#define XATTR_NAME_SMACKEXEC XATTR_SECURITY_PREFIX XATTR_SMACK_EXEC
+#define XATTR_NAME_SMACKTRANSMUTE XATTR_SECURITY_PREFIX XATTR_SMACK_TRANSMUTE
+#define XATTR_NAME_SMACKMMAP XATTR_SECURITY_PREFIX XATTR_SMACK_MMAP
+
+#define XATTR_CAPS_SUFFIX "capability"
+#define XATTR_NAME_CAPS XATTR_SECURITY_PREFIX XATTR_CAPS_SUFFIX
+
+#define XATTR_POSIX_ACL_ACCESS "posix_acl_access"
+#define XATTR_NAME_POSIX_ACL_ACCESS XATTR_SYSTEM_PREFIX XATTR_POSIX_ACL_ACCESS
+#define XATTR_POSIX_ACL_DEFAULT "posix_acl_default"
+#define XATTR_NAME_POSIX_ACL_DEFAULT XATTR_SYSTEM_PREFIX XATTR_POSIX_ACL_DEFAULT
+
+
+#endif /* _UAPI_LINUX_XATTR_H */
diff --git a/include/linux/xfrm.h b/include/uapi/linux/xfrm.h
similarity index 100%
rename from include/linux/xfrm.h
rename to include/uapi/linux/xfrm.h
diff --git a/tools/vm/page-types.c b/tools/vm/page-types.c
index f576971..cd1b03e 100644
--- a/tools/vm/page-types.c
+++ b/tools/vm/page-types.c
@@ -34,7 +34,7 @@
#include <sys/fcntl.h>
#include <sys/mount.h>
#include <sys/statfs.h>
-#include "../../include/linux/magic.h"
+#include "../../include/uapi/linux/magic.h"
#include "../../include/linux/kernel-page-flags.h"