drivers/video/aty/mach64_accel.c - kernel/msm-4.9 - Gitiles


 /*
  *  ATI Mach64 Hardware Acceleration
  */

 #include <linux/delay.h>
 #include <linux/fb.h>
 #include <video/mach64.h>
 #include "atyfb.h"

     /*
      *  Generic Mach64 routines
      */

 /* this is for DMA GUI engine! work in progress */
 typedef struct {
 	u32 frame_buf_offset;
 	u32 system_mem_addr;
 	u32 command;
 	u32 reserved;
 } BM_DESCRIPTOR_ENTRY;

 #define LAST_DESCRIPTOR (1 << 31)
 #define SYSTEM_TO_FRAME_BUFFER 0

 static u32 rotation24bpp(u32 dx, u32 direction)
 {
 	u32 rotation;
 	if (direction & DST_X_LEFT_TO_RIGHT) {
 		rotation = (dx / 4) % 6;
 	} else {
 		rotation = ((dx + 2) / 4) % 6;
 	}

 	return ((rotation << 8) | DST_24_ROTATION_ENABLE);
 }

 void aty_reset_engine(const struct atyfb_par *par)
 {
 	/* reset engine */
 	aty_st_le32(GEN_TEST_CNTL,
 		aty_ld_le32(GEN_TEST_CNTL, par) &
 		~(GUI_ENGINE_ENABLE | HWCURSOR_ENABLE), par);
 	/* enable engine */
 	aty_st_le32(GEN_TEST_CNTL,
 		aty_ld_le32(GEN_TEST_CNTL, par) | GUI_ENGINE_ENABLE, par);
 	/* ensure engine is not locked up by clearing any FIFO or */
 	/* HOST errors */
 	aty_st_le32(BUS_CNTL,
 		aty_ld_le32(BUS_CNTL, par) | BUS_HOST_ERR_ACK | BUS_FIFO_ERR_ACK, par);
 }

 static void reset_GTC_3D_engine(const struct atyfb_par *par)
 {
 	aty_st_le32(SCALE_3D_CNTL, 0xc0, par);
 	mdelay(GTC_3D_RESET_DELAY);
 	aty_st_le32(SETUP_CNTL, 0x00, par);
 	mdelay(GTC_3D_RESET_DELAY);
 	aty_st_le32(SCALE_3D_CNTL, 0x00, par);
 	mdelay(GTC_3D_RESET_DELAY);
 }

 void aty_init_engine(struct atyfb_par *par, struct fb_info *info)
 {
 	u32 pitch_value;
 	u32 vxres;

 	/* determine modal information from global mode structure */
 	pitch_value = info->fix.line_length / (info->var.bits_per_pixel / 8);
 	vxres = info->var.xres_virtual;

 	if (info->var.bits_per_pixel == 24) {
 		/* In 24 bpp, the engine is in 8 bpp - this requires that all */
 		/* horizontal coordinates and widths must be adjusted */
 		pitch_value *= 3;
 		vxres *= 3;
 	}

 	/* On GTC (RagePro), we need to reset the 3D engine before */
 	if (M64_HAS(RESET_3D))
 		reset_GTC_3D_engine(par);

 	/* Reset engine, enable, and clear any engine errors */
 	aty_reset_engine(par);
 	/* Ensure that vga page pointers are set to zero - the upper */
 	/* page pointers are set to 1 to handle overflows in the */
 	/* lower page */
 	aty_st_le32(MEM_VGA_WP_SEL, 0x00010000, par);
 	aty_st_le32(MEM_VGA_RP_SEL, 0x00010000, par);

 	/* ---- Setup standard engine context ---- */

 	/* All GUI registers here are FIFOed - therefore, wait for */
 	/* the appropriate number of empty FIFO entries */
 	wait_for_fifo(14, par);

 	/* enable all registers to be loaded for context loads */
 	aty_st_le32(CONTEXT_MASK, 0xFFFFFFFF, par);

 	/* set destination pitch to modal pitch, set offset to zero */
 	aty_st_le32(DST_OFF_PITCH, (pitch_value / 8) << 22, par);

 	/* zero these registers (set them to a known state) */
 	aty_st_le32(DST_Y_X, 0, par);
 	aty_st_le32(DST_HEIGHT, 0, par);
 	aty_st_le32(DST_BRES_ERR, 0, par);
 	aty_st_le32(DST_BRES_INC, 0, par);
 	aty_st_le32(DST_BRES_DEC, 0, par);

 	/* set destination drawing attributes */
 	aty_st_le32(DST_CNTL, DST_LAST_PEL | DST_Y_TOP_TO_BOTTOM |
 		    DST_X_LEFT_TO_RIGHT, par);

 	/* set source pitch to modal pitch, set offset to zero */
 	aty_st_le32(SRC_OFF_PITCH, (pitch_value / 8) << 22, par);

 	/* set these registers to a known state */
 	aty_st_le32(SRC_Y_X, 0, par);
 	aty_st_le32(SRC_HEIGHT1_WIDTH1, 1, par);
 	aty_st_le32(SRC_Y_X_START, 0, par);
 	aty_st_le32(SRC_HEIGHT2_WIDTH2, 1, par);

 	/* set source pixel retrieving attributes */
 	aty_st_le32(SRC_CNTL, SRC_LINE_X_LEFT_TO_RIGHT, par);

 	/* set host attributes */
 	wait_for_fifo(13, par);
 	aty_st_le32(HOST_CNTL, 0, par);

 	/* set pattern attributes */
 	aty_st_le32(PAT_REG0, 0, par);
 	aty_st_le32(PAT_REG1, 0, par);
 	aty_st_le32(PAT_CNTL, 0, par);

 	/* set scissors to modal size */
 	aty_st_le32(SC_LEFT, 0, par);
 	aty_st_le32(SC_TOP, 0, par);
 	aty_st_le32(SC_BOTTOM, par->crtc.vyres - 1, par);
 	aty_st_le32(SC_RIGHT, vxres - 1, par);

 	/* set background color to minimum value (usually BLACK) */
 	aty_st_le32(DP_BKGD_CLR, 0, par);

 	/* set foreground color to maximum value (usually WHITE) */
 	aty_st_le32(DP_FRGD_CLR, 0xFFFFFFFF, par);

 	/* set write mask to effect all pixel bits */
 	aty_st_le32(DP_WRITE_MASK, 0xFFFFFFFF, par);

 	/* set foreground mix to overpaint and background mix to */
 	/* no-effect */
 	aty_st_le32(DP_MIX, FRGD_MIX_S | BKGD_MIX_D, par);

 	/* set primary source pixel channel to foreground color */
 	/* register */
 	aty_st_le32(DP_SRC, FRGD_SRC_FRGD_CLR, par);

 	/* set compare functionality to false (no-effect on */
 	/* destination) */
 	wait_for_fifo(3, par);
 	aty_st_le32(CLR_CMP_CLR, 0, par);
 	aty_st_le32(CLR_CMP_MASK, 0xFFFFFFFF, par);
 	aty_st_le32(CLR_CMP_CNTL, 0, par);

 	/* set pixel depth */
 	wait_for_fifo(2, par);
 	aty_st_le32(DP_PIX_WIDTH, par->crtc.dp_pix_width, par);
 	aty_st_le32(DP_CHAIN_MASK, par->crtc.dp_chain_mask, par);

 	wait_for_fifo(5, par);
  	aty_st_le32(SCALE_3D_CNTL, 0, par);
 	aty_st_le32(Z_CNTL, 0, par);
 	aty_st_le32(CRTC_INT_CNTL, aty_ld_le32(CRTC_INT_CNTL, par) & ~0x20,
 		    par);
 	aty_st_le32(GUI_TRAJ_CNTL, 0x100023, par);

 	/* insure engine is idle before leaving */
 	wait_for_idle(par);
 }

     /*
      *  Accelerated functions
      */

 static inline void draw_rect(s16 x, s16 y, u16 width, u16 height,
 			     struct atyfb_par *par)
 {
 	/* perform rectangle fill */
 	wait_for_fifo(2, par);
 	aty_st_le32(DST_Y_X, (x << 16) | y, par);
 	aty_st_le32(DST_HEIGHT_WIDTH, (width << 16) | height, par);
 	par->blitter_may_be_busy = 1;
 }

 void atyfb_copyarea(struct fb_info *info, const struct fb_copyarea *area)
 {
 	struct atyfb_par *par = (struct atyfb_par *) info->par;
 	u32 dy = area->dy, sy = area->sy, direction = DST_LAST_PEL;
 	u32 sx = area->sx, dx = area->dx, width = area->width, rotation = 0;

 	if (par->asleep)
 		return;
 	if (!area->width || !area->height)
 		return;
 	if (!par->accel_flags) {
 		cfb_copyarea(info, area);
 		return;
 	}

 	if (info->var.bits_per_pixel == 24) {
 		/* In 24 bpp, the engine is in 8 bpp - this requires that all */
 		/* horizontal coordinates and widths must be adjusted */
 		sx *= 3;
 		dx *= 3;
 		width *= 3;
 	}

 	if (area->sy < area->dy) {
 		dy += area->height - 1;
 		sy += area->height - 1;
 	} else
 		direction |= DST_Y_TOP_TO_BOTTOM;

 	if (sx < dx) {
 		dx += width - 1;
 		sx += width - 1;
 	} else
 		direction |= DST_X_LEFT_TO_RIGHT;

 	if (info->var.bits_per_pixel == 24) {
 		rotation = rotation24bpp(dx, direction);
 	}

 	wait_for_fifo(4, par);
 	aty_st_le32(DP_SRC, FRGD_SRC_BLIT, par);
 	aty_st_le32(SRC_Y_X, (sx << 16) | sy, par);
 	aty_st_le32(SRC_HEIGHT1_WIDTH1, (width << 16) | area->height, par);
 	aty_st_le32(DST_CNTL, direction | rotation, par);
 	draw_rect(dx, dy, width, area->height, par);
 }

 void atyfb_fillrect(struct fb_info *info, const struct fb_fillrect *rect)
 {
 	struct atyfb_par *par = (struct atyfb_par *) info->par;
 	u32 color, dx = rect->dx, width = rect->width, rotation = 0;

 	if (par->asleep)
 		return;
 	if (!rect->width || !rect->height)
 		return;
 	if (!par->accel_flags) {
 		cfb_fillrect(info, rect);
 		return;
 	}

 	if (info->fix.visual == FB_VISUAL_TRUECOLOR ||
 	    info->fix.visual == FB_VISUAL_DIRECTCOLOR)
 		color = ((u32 *)(info->pseudo_palette))[rect->color];
 	else
 		color = rect->color;

 	if (info->var.bits_per_pixel == 24) {
 		/* In 24 bpp, the engine is in 8 bpp - this requires that all */
 		/* horizontal coordinates and widths must be adjusted */
 		dx *= 3;
 		width *= 3;
 		rotation = rotation24bpp(dx, DST_X_LEFT_TO_RIGHT);
 	}

 	wait_for_fifo(3, par);
 	aty_st_le32(DP_FRGD_CLR, color, par);
 	aty_st_le32(DP_SRC,
 		    BKGD_SRC_BKGD_CLR | FRGD_SRC_FRGD_CLR | MONO_SRC_ONE,
 		    par);
 	aty_st_le32(DST_CNTL,
 		    DST_LAST_PEL | DST_Y_TOP_TO_BOTTOM |
 		    DST_X_LEFT_TO_RIGHT | rotation, par);
 	draw_rect(dx, rect->dy, width, rect->height, par);
 }

 void atyfb_imageblit(struct fb_info *info, const struct fb_image *image)
 {
 	struct atyfb_par *par = (struct atyfb_par *) info->par;
 	u32 src_bytes, dx = image->dx, dy = image->dy, width = image->width;
 	u32 pix_width_save, pix_width, host_cntl, rotation = 0, src, mix;

 	if (par->asleep)
 		return;
 	if (!image->width || !image->height)
 		return;
 	if (!par->accel_flags ||
 	    (image->depth != 1 && info->var.bits_per_pixel != image->depth)) {
 		cfb_imageblit(info, image);
 		return;
 	}

 	pix_width = pix_width_save = aty_ld_le32(DP_PIX_WIDTH, par);
 	host_cntl = aty_ld_le32(HOST_CNTL, par) | HOST_BYTE_ALIGN;

 	switch (image->depth) {
 	case 1:
 	    pix_width &= ~(BYTE_ORDER_MASK | HOST_MASK);
 	    pix_width |= (BYTE_ORDER_MSB_TO_LSB | HOST_1BPP);
 	    break;
 	case 4:
 	    pix_width &= ~(BYTE_ORDER_MASK | HOST_MASK);
 	    pix_width |= (BYTE_ORDER_MSB_TO_LSB | HOST_4BPP);
 	    break;
 	case 8:
 	    pix_width &= ~HOST_MASK;
 	    pix_width |= HOST_8BPP;
 	    break;
 	case 15:
 	    pix_width &= ~HOST_MASK;
 	    pix_width |= HOST_15BPP;
 	    break;
 	case 16:
 	    pix_width &= ~HOST_MASK;
 	    pix_width |= HOST_16BPP;
 	    break;
 	case 24:
 	    pix_width &= ~HOST_MASK;
 	    pix_width |= HOST_24BPP;
 	    break;
 	case 32:
 	    pix_width &= ~HOST_MASK;
 	    pix_width |= HOST_32BPP;
 	    break;
 	}

 	if (info->var.bits_per_pixel == 24) {
 		/* In 24 bpp, the engine is in 8 bpp - this requires that all */
 		/* horizontal coordinates and widths must be adjusted */
 		dx *= 3;
 		width *= 3;

 		rotation = rotation24bpp(dx, DST_X_LEFT_TO_RIGHT);

 		pix_width &= ~DST_MASK;
 		pix_width |= DST_8BPP;

 		/*
 		 * since Rage 3D IIc we have DP_HOST_TRIPLE_EN bit
 		 * this hwaccelerated triple has an issue with not aligned data
 		 */
 		if (M64_HAS(HW_TRIPLE) && image->width % 8 == 0)
 			pix_width |= DP_HOST_TRIPLE_EN;
 	}

 	if (image->depth == 1) {
 		u32 fg, bg;
 		if (info->fix.visual == FB_VISUAL_TRUECOLOR ||
 		    info->fix.visual == FB_VISUAL_DIRECTCOLOR) {
 			fg = ((u32*)(info->pseudo_palette))[image->fg_color];
 			bg = ((u32*)(info->pseudo_palette))[image->bg_color];
 		} else {
 			fg = image->fg_color;
 			bg = image->bg_color;
 		}

 		wait_for_fifo(2, par);
 		aty_st_le32(DP_BKGD_CLR, bg, par);
 		aty_st_le32(DP_FRGD_CLR, fg, par);
 		src = MONO_SRC_HOST | FRGD_SRC_FRGD_CLR | BKGD_SRC_BKGD_CLR;
 		mix = FRGD_MIX_S | BKGD_MIX_S;
 	} else {
 		src = MONO_SRC_ONE | FRGD_SRC_HOST;
 		mix = FRGD_MIX_D_XOR_S | BKGD_MIX_D;
 	}

 	wait_for_fifo(6, par);
 	aty_st_le32(DP_WRITE_MASK, 0xFFFFFFFF, par);
 	aty_st_le32(DP_PIX_WIDTH, pix_width, par);
 	aty_st_le32(DP_MIX, mix, par);
 	aty_st_le32(DP_SRC, src, par);
 	aty_st_le32(HOST_CNTL, host_cntl, par);
 	aty_st_le32(DST_CNTL, DST_Y_TOP_TO_BOTTOM | DST_X_LEFT_TO_RIGHT | rotation, par);

 	draw_rect(dx, dy, width, image->height, par);
 	src_bytes = (((image->width * image->depth) + 7) / 8) * image->height;

 	/* manual triple each pixel */
 	if (info->var.bits_per_pixel == 24 && !(pix_width & DP_HOST_TRIPLE_EN)) {
 		int inbit, outbit, mult24, byte_id_in_dword, width;
 		u8 *pbitmapin = (u8*)image->data, *pbitmapout;
 		u32 hostdword;

 		for (width = image->width, inbit = 7, mult24 = 0; src_bytes; ) {
 			for (hostdword = 0, pbitmapout = (u8*)&hostdword, byte_id_in_dword = 0;
 				byte_id_in_dword < 4 && src_bytes;
 				byte_id_in_dword++, pbitmapout++) {
 				for (outbit = 7; outbit >= 0; outbit--) {
 					*pbitmapout |= (((*pbitmapin >> inbit) & 1) << outbit);
 					mult24++;
 					/* next bit */
 					if (mult24 == 3) {
 						mult24 = 0;
 						inbit--;
 						width--;
 					}

 					/* next byte */
 					if (inbit < 0 || width == 0) {
 						src_bytes--;
 						pbitmapin++;
 						inbit = 7;

 						if (width == 0) {
 						    width = image->width;
 						    outbit = 0;
 						}
 					}
 				}
 			}
 			wait_for_fifo(1, par);
 			aty_st_le32(HOST_DATA0, hostdword, par);
 		}
 	} else {
 		u32 *pbitmap, dwords = (src_bytes + 3) / 4;
 		for (pbitmap = (u32*)(image->data); dwords; dwords--, pbitmap++) {
 			wait_for_fifo(1, par);
 			aty_st_le32(HOST_DATA0, le32_to_cpup(pbitmap), par);
 		}
 	}

 	/* restore pix_width */
 	wait_for_fifo(1, par);
 	aty_st_le32(DP_PIX_WIDTH, pix_width_save, par);
 }

	/*
	* ATI Mach64 Hardware Acceleration
	*/

	#include <linux/delay.h>
	#include <linux/fb.h>
	#include <video/mach64.h>
	#include "atyfb.h"

	/*
	* Generic Mach64 routines
	*/

	/* this is for DMA GUI engine! work in progress */
	typedef struct {
	u32 frame_buf_offset;
	u32 system_mem_addr;
	u32 command;
	u32 reserved;
	} BM_DESCRIPTOR_ENTRY;

	#define LAST_DESCRIPTOR (1 << 31)
	#define SYSTEM_TO_FRAME_BUFFER 0

	static u32 rotation24bpp(u32 dx, u32 direction)
	{
	u32 rotation;
	if (direction & DST_X_LEFT_TO_RIGHT) {
	rotation = (dx / 4) % 6;
	} else {
	rotation = ((dx + 2) / 4) % 6;
	}

	return ((rotation << 8) \| DST_24_ROTATION_ENABLE);
	}

	void aty_reset_engine(const struct atyfb_par *par)
	{
	/* reset engine */
	aty_st_le32(GEN_TEST_CNTL,
	aty_ld_le32(GEN_TEST_CNTL, par) &
	~(GUI_ENGINE_ENABLE \| HWCURSOR_ENABLE), par);
	/* enable engine */
	aty_st_le32(GEN_TEST_CNTL,
	aty_ld_le32(GEN_TEST_CNTL, par) \| GUI_ENGINE_ENABLE, par);
	/* ensure engine is not locked up by clearing any FIFO or */
	/* HOST errors */
	aty_st_le32(BUS_CNTL,
	aty_ld_le32(BUS_CNTL, par) \| BUS_HOST_ERR_ACK \| BUS_FIFO_ERR_ACK, par);
	}

	static void reset_GTC_3D_engine(const struct atyfb_par *par)
	{
	aty_st_le32(SCALE_3D_CNTL, 0xc0, par);
	mdelay(GTC_3D_RESET_DELAY);
	aty_st_le32(SETUP_CNTL, 0x00, par);
	mdelay(GTC_3D_RESET_DELAY);
	aty_st_le32(SCALE_3D_CNTL, 0x00, par);
	mdelay(GTC_3D_RESET_DELAY);
	}

	void aty_init_engine(struct atyfb_par par, struct fb_info info)
	{
	u32 pitch_value;
	u32 vxres;

	/* determine modal information from global mode structure */
	pitch_value = info->fix.line_length / (info->var.bits_per_pixel / 8);
	vxres = info->var.xres_virtual;

	if (info->var.bits_per_pixel == 24) {
	/* In 24 bpp, the engine is in 8 bpp - this requires that all */
	/* horizontal coordinates and widths must be adjusted */
	pitch_value *= 3;
	vxres *= 3;
	}

	/* On GTC (RagePro), we need to reset the 3D engine before */
	if (M64_HAS(RESET_3D))
	reset_GTC_3D_engine(par);

	/* Reset engine, enable, and clear any engine errors */
	aty_reset_engine(par);
	/* Ensure that vga page pointers are set to zero - the upper */
	/* page pointers are set to 1 to handle overflows in the */
	/* lower page */
	aty_st_le32(MEM_VGA_WP_SEL, 0x00010000, par);
	aty_st_le32(MEM_VGA_RP_SEL, 0x00010000, par);

	/* ---- Setup standard engine context ---- */

	/* All GUI registers here are FIFOed - therefore, wait for */
	/* the appropriate number of empty FIFO entries */
	wait_for_fifo(14, par);

	/* enable all registers to be loaded for context loads */
	aty_st_le32(CONTEXT_MASK, 0xFFFFFFFF, par);

	/* set destination pitch to modal pitch, set offset to zero */
	aty_st_le32(DST_OFF_PITCH, (pitch_value / 8) << 22, par);

	/* zero these registers (set them to a known state) */
	aty_st_le32(DST_Y_X, 0, par);
	aty_st_le32(DST_HEIGHT, 0, par);
	aty_st_le32(DST_BRES_ERR, 0, par);
	aty_st_le32(DST_BRES_INC, 0, par);
	aty_st_le32(DST_BRES_DEC, 0, par);

	/* set destination drawing attributes */
	aty_st_le32(DST_CNTL, DST_LAST_PEL \| DST_Y_TOP_TO_BOTTOM \|
	DST_X_LEFT_TO_RIGHT, par);

	/* set source pitch to modal pitch, set offset to zero */
	aty_st_le32(SRC_OFF_PITCH, (pitch_value / 8) << 22, par);

	/* set these registers to a known state */
	aty_st_le32(SRC_Y_X, 0, par);
	aty_st_le32(SRC_HEIGHT1_WIDTH1, 1, par);
	aty_st_le32(SRC_Y_X_START, 0, par);
	aty_st_le32(SRC_HEIGHT2_WIDTH2, 1, par);

	/* set source pixel retrieving attributes */
	aty_st_le32(SRC_CNTL, SRC_LINE_X_LEFT_TO_RIGHT, par);

	/* set host attributes */
	wait_for_fifo(13, par);
	aty_st_le32(HOST_CNTL, 0, par);

	/* set pattern attributes */
	aty_st_le32(PAT_REG0, 0, par);
	aty_st_le32(PAT_REG1, 0, par);
	aty_st_le32(PAT_CNTL, 0, par);

	/* set scissors to modal size */
	aty_st_le32(SC_LEFT, 0, par);
	aty_st_le32(SC_TOP, 0, par);
	aty_st_le32(SC_BOTTOM, par->crtc.vyres - 1, par);
	aty_st_le32(SC_RIGHT, vxres - 1, par);

	/* set background color to minimum value (usually BLACK) */
	aty_st_le32(DP_BKGD_CLR, 0, par);

	/* set foreground color to maximum value (usually WHITE) */
	aty_st_le32(DP_FRGD_CLR, 0xFFFFFFFF, par);

	/* set write mask to effect all pixel bits */
	aty_st_le32(DP_WRITE_MASK, 0xFFFFFFFF, par);

	/* set foreground mix to overpaint and background mix to */
	/* no-effect */
	aty_st_le32(DP_MIX, FRGD_MIX_S \| BKGD_MIX_D, par);

	/* set primary source pixel channel to foreground color */
	/* register */
	aty_st_le32(DP_SRC, FRGD_SRC_FRGD_CLR, par);

	/* set compare functionality to false (no-effect on */
	/* destination) */
	wait_for_fifo(3, par);
	aty_st_le32(CLR_CMP_CLR, 0, par);
	aty_st_le32(CLR_CMP_MASK, 0xFFFFFFFF, par);
	aty_st_le32(CLR_CMP_CNTL, 0, par);

	/* set pixel depth */
	wait_for_fifo(2, par);
	aty_st_le32(DP_PIX_WIDTH, par->crtc.dp_pix_width, par);
	aty_st_le32(DP_CHAIN_MASK, par->crtc.dp_chain_mask, par);

	wait_for_fifo(5, par);
	aty_st_le32(SCALE_3D_CNTL, 0, par);
	aty_st_le32(Z_CNTL, 0, par);
	aty_st_le32(CRTC_INT_CNTL, aty_ld_le32(CRTC_INT_CNTL, par) & ~0x20,
	par);
	aty_st_le32(GUI_TRAJ_CNTL, 0x100023, par);

	/* insure engine is idle before leaving */
	wait_for_idle(par);
	}

	/*
	* Accelerated functions
	*/

	static inline void draw_rect(s16 x, s16 y, u16 width, u16 height,
	struct atyfb_par *par)
	{
	/* perform rectangle fill */
	wait_for_fifo(2, par);
	aty_st_le32(DST_Y_X, (x << 16) \| y, par);
	aty_st_le32(DST_HEIGHT_WIDTH, (width << 16) \| height, par);
	par->blitter_may_be_busy = 1;
	}

	void atyfb_copyarea(struct fb_info info, const struct fb_copyarea area)
	{
	struct atyfb_par par = (struct atyfb_par ) info->par;
	u32 dy = area->dy, sy = area->sy, direction = DST_LAST_PEL;
	u32 sx = area->sx, dx = area->dx, width = area->width, rotation = 0;

	if (par->asleep)
	return;
	if (!area->width \|\| !area->height)
	return;
	if (!par->accel_flags) {
	cfb_copyarea(info, area);
	return;
	}

	if (info->var.bits_per_pixel == 24) {
	/* In 24 bpp, the engine is in 8 bpp - this requires that all */
	/* horizontal coordinates and widths must be adjusted */
	sx *= 3;
	dx *= 3;
	width *= 3;
	}

	if (area->sy < area->dy) {
	dy += area->height - 1;
	sy += area->height - 1;
	} else
	direction \|= DST_Y_TOP_TO_BOTTOM;

	if (sx < dx) {
	dx += width - 1;
	sx += width - 1;
	} else
	direction \|= DST_X_LEFT_TO_RIGHT;

	if (info->var.bits_per_pixel == 24) {
	rotation = rotation24bpp(dx, direction);
	}

	wait_for_fifo(4, par);
	aty_st_le32(DP_SRC, FRGD_SRC_BLIT, par);
	aty_st_le32(SRC_Y_X, (sx << 16) \| sy, par);
	aty_st_le32(SRC_HEIGHT1_WIDTH1, (width << 16) \| area->height, par);
	aty_st_le32(DST_CNTL, direction \| rotation, par);
	draw_rect(dx, dy, width, area->height, par);
	}

	void atyfb_fillrect(struct fb_info info, const struct fb_fillrect rect)
	{
	struct atyfb_par par = (struct atyfb_par ) info->par;
	u32 color, dx = rect->dx, width = rect->width, rotation = 0;

	if (par->asleep)
	return;
	if (!rect->width \|\| !rect->height)
	return;
	if (!par->accel_flags) {
	cfb_fillrect(info, rect);
	return;
	}

	if (info->fix.visual == FB_VISUAL_TRUECOLOR \|\|
	info->fix.visual == FB_VISUAL_DIRECTCOLOR)
	color = ((u32 *)(info->pseudo_palette))[rect->color];
	else
	color = rect->color;

	if (info->var.bits_per_pixel == 24) {
	/* In 24 bpp, the engine is in 8 bpp - this requires that all */
	/* horizontal coordinates and widths must be adjusted */
	dx *= 3;
	width *= 3;
	rotation = rotation24bpp(dx, DST_X_LEFT_TO_RIGHT);
	}

	wait_for_fifo(3, par);
	aty_st_le32(DP_FRGD_CLR, color, par);
	aty_st_le32(DP_SRC,
	BKGD_SRC_BKGD_CLR \| FRGD_SRC_FRGD_CLR \| MONO_SRC_ONE,
	par);
	aty_st_le32(DST_CNTL,
	DST_LAST_PEL \| DST_Y_TOP_TO_BOTTOM \|
	DST_X_LEFT_TO_RIGHT \| rotation, par);
	draw_rect(dx, rect->dy, width, rect->height, par);
	}

	void atyfb_imageblit(struct fb_info info, const struct fb_image image)
	{
	struct atyfb_par par = (struct atyfb_par ) info->par;
	u32 src_bytes, dx = image->dx, dy = image->dy, width = image->width;
	u32 pix_width_save, pix_width, host_cntl, rotation = 0, src, mix;

	if (par->asleep)
	return;
	if (!image->width \|\| !image->height)
	return;
	if (!par->accel_flags \|\|
	(image->depth != 1 && info->var.bits_per_pixel != image->depth)) {
	cfb_imageblit(info, image);
	return;
	}

	pix_width = pix_width_save = aty_ld_le32(DP_PIX_WIDTH, par);
	host_cntl = aty_ld_le32(HOST_CNTL, par) \| HOST_BYTE_ALIGN;

	switch (image->depth) {
	case 1:
	pix_width &= ~(BYTE_ORDER_MASK \| HOST_MASK);
	pix_width \|= (BYTE_ORDER_MSB_TO_LSB \| HOST_1BPP);
	break;
	case 4:
	pix_width &= ~(BYTE_ORDER_MASK \| HOST_MASK);
	pix_width \|= (BYTE_ORDER_MSB_TO_LSB \| HOST_4BPP);
	break;
	case 8:
	pix_width &= ~HOST_MASK;
	pix_width \|= HOST_8BPP;
	break;
	case 15:
	pix_width &= ~HOST_MASK;
	pix_width \|= HOST_15BPP;
	break;
	case 16:
	pix_width &= ~HOST_MASK;
	pix_width \|= HOST_16BPP;
	break;
	case 24:
	pix_width &= ~HOST_MASK;
	pix_width \|= HOST_24BPP;
	break;
	case 32:
	pix_width &= ~HOST_MASK;
	pix_width \|= HOST_32BPP;
	break;
	}

	if (info->var.bits_per_pixel == 24) {
	/* In 24 bpp, the engine is in 8 bpp - this requires that all */
	/* horizontal coordinates and widths must be adjusted */
	dx *= 3;
	width *= 3;

	rotation = rotation24bpp(dx, DST_X_LEFT_TO_RIGHT);

	pix_width &= ~DST_MASK;
	pix_width \|= DST_8BPP;

	/*
	* since Rage 3D IIc we have DP_HOST_TRIPLE_EN bit
	* this hwaccelerated triple has an issue with not aligned data
	*/
	if (M64_HAS(HW_TRIPLE) && image->width % 8 == 0)
	pix_width \|= DP_HOST_TRIPLE_EN;
	}

	if (image->depth == 1) {
	u32 fg, bg;
	if (info->fix.visual == FB_VISUAL_TRUECOLOR \|\|
	info->fix.visual == FB_VISUAL_DIRECTCOLOR) {
	fg = ((u32*)(info->pseudo_palette))[image->fg_color];
	bg = ((u32*)(info->pseudo_palette))[image->bg_color];
	} else {
	fg = image->fg_color;
	bg = image->bg_color;
	}

	wait_for_fifo(2, par);
	aty_st_le32(DP_BKGD_CLR, bg, par);
	aty_st_le32(DP_FRGD_CLR, fg, par);
	src = MONO_SRC_HOST \| FRGD_SRC_FRGD_CLR \| BKGD_SRC_BKGD_CLR;
	mix = FRGD_MIX_S \| BKGD_MIX_S;
	} else {
	src = MONO_SRC_ONE \| FRGD_SRC_HOST;
	mix = FRGD_MIX_D_XOR_S \| BKGD_MIX_D;
	}

	wait_for_fifo(6, par);
	aty_st_le32(DP_WRITE_MASK, 0xFFFFFFFF, par);
	aty_st_le32(DP_PIX_WIDTH, pix_width, par);
	aty_st_le32(DP_MIX, mix, par);
	aty_st_le32(DP_SRC, src, par);
	aty_st_le32(HOST_CNTL, host_cntl, par);
	aty_st_le32(DST_CNTL, DST_Y_TOP_TO_BOTTOM \| DST_X_LEFT_TO_RIGHT \| rotation, par);

	draw_rect(dx, dy, width, image->height, par);
	src_bytes = (((image->width * image->depth) + 7) / 8) * image->height;

	/* manual triple each pixel */
	if (info->var.bits_per_pixel == 24 && !(pix_width & DP_HOST_TRIPLE_EN)) {
	int inbit, outbit, mult24, byte_id_in_dword, width;
	u8 pbitmapin = (u8)image->data, *pbitmapout;
	u32 hostdword;

	for (width = image->width, inbit = 7, mult24 = 0; src_bytes; ) {
	for (hostdword = 0, pbitmapout = (u8*)&hostdword, byte_id_in_dword = 0;
	byte_id_in_dword < 4 && src_bytes;
	byte_id_in_dword++, pbitmapout++) {
	for (outbit = 7; outbit >= 0; outbit--) {
	pbitmapout \|= (((pbitmapin >> inbit) & 1) << outbit);
	mult24++;
	/* next bit */
	if (mult24 == 3) {
	mult24 = 0;
	inbit--;
	width--;
	}

	/* next byte */
	if (inbit < 0 \|\| width == 0) {
	src_bytes--;
	pbitmapin++;
	inbit = 7;

	if (width == 0) {
	width = image->width;
	outbit = 0;
	}
	}
	}
	}
	wait_for_fifo(1, par);
	aty_st_le32(HOST_DATA0, hostdword, par);
	}
	} else {
	u32 *pbitmap, dwords = (src_bytes + 3) / 4;
	for (pbitmap = (u32*)(image->data); dwords; dwords--, pbitmap++) {
	wait_for_fifo(1, par);
	aty_st_le32(HOST_DATA0, le32_to_cpup(pbitmap), par);
	}
	}

	/* restore pix_width */
	wait_for_fifo(1, par);
	aty_st_le32(DP_PIX_WIDTH, pix_width_save, par);
	}