diff --git a/drivers/net/wireless/iwlwifi/iwl-mac80211.c b/drivers/net/wireless/iwlwifi/iwl-mac80211.c
index c06bfe4..1b2dbb0 100644
--- a/drivers/net/wireless/iwlwifi/iwl-mac80211.c
+++ b/drivers/net/wireless/iwlwifi/iwl-mac80211.c
@@ -1493,6 +1493,314 @@
 	return 0;
 }
 
+static int iwlagn_mac_conf_tx(struct ieee80211_hw *hw,
+		    struct ieee80211_vif *vif, u16 queue,
+		    const struct ieee80211_tx_queue_params *params)
+{
+	struct iwl_priv *priv = hw->priv;
+	struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv;
+	struct iwl_rxon_context *ctx = vif_priv->ctx;
+	unsigned long flags;
+	int q;
+
+	if (WARN_ON(!ctx))
+		return -EINVAL;
+
+	IWL_DEBUG_MAC80211(priv, "enter\n");
+
+	if (!iwl_is_ready_rf(priv->shrd)) {
+		IWL_DEBUG_MAC80211(priv, "leave - RF not ready\n");
+		return -EIO;
+	}
+
+	if (queue >= AC_NUM) {
+		IWL_DEBUG_MAC80211(priv, "leave - queue >= AC_NUM %d\n", queue);
+		return 0;
+	}
+
+	q = AC_NUM - 1 - queue;
+
+	spin_lock_irqsave(&priv->shrd->lock, flags);
+
+	ctx->qos_data.def_qos_parm.ac[q].cw_min =
+		cpu_to_le16(params->cw_min);
+	ctx->qos_data.def_qos_parm.ac[q].cw_max =
+		cpu_to_le16(params->cw_max);
+	ctx->qos_data.def_qos_parm.ac[q].aifsn = params->aifs;
+	ctx->qos_data.def_qos_parm.ac[q].edca_txop =
+			cpu_to_le16((params->txop * 32));
+
+	ctx->qos_data.def_qos_parm.ac[q].reserved1 = 0;
+
+	spin_unlock_irqrestore(&priv->shrd->lock, flags);
+
+	IWL_DEBUG_MAC80211(priv, "leave\n");
+	return 0;
+}
+
+static int iwlagn_mac_tx_last_beacon(struct ieee80211_hw *hw)
+{
+	struct iwl_priv *priv = hw->priv;
+
+	return priv->ibss_manager == IWL_IBSS_MANAGER;
+}
+
+static int iwl_set_mode(struct iwl_priv *priv, struct iwl_rxon_context *ctx)
+{
+	iwl_connection_init_rx_config(priv, ctx);
+
+	iwlagn_set_rxon_chain(priv, ctx);
+
+	return iwlagn_commit_rxon(priv, ctx);
+}
+
+static int iwl_setup_interface(struct iwl_priv *priv,
+			       struct iwl_rxon_context *ctx)
+{
+	struct ieee80211_vif *vif = ctx->vif;
+	int err;
+
+	lockdep_assert_held(&priv->shrd->mutex);
+
+	/*
+	 * This variable will be correct only when there's just
+	 * a single context, but all code using it is for hardware
+	 * that supports only one context.
+	 */
+	priv->iw_mode = vif->type;
+
+	ctx->is_active = true;
+
+	err = iwl_set_mode(priv, ctx);
+	if (err) {
+		if (!ctx->always_active)
+			ctx->is_active = false;
+		return err;
+	}
+
+	if (priv->cfg->bt_params && priv->cfg->bt_params->advanced_bt_coexist &&
+	    vif->type == NL80211_IFTYPE_ADHOC) {
+		/*
+		 * pretend to have high BT traffic as long as we
+		 * are operating in IBSS mode, as this will cause
+		 * the rate scaling etc. to behave as intended.
+		 */
+		priv->bt_traffic_load = IWL_BT_COEX_TRAFFIC_LOAD_HIGH;
+	}
+
+	return 0;
+}
+
+static int iwlagn_mac_add_interface(struct ieee80211_hw *hw,
+			     struct ieee80211_vif *vif)
+{
+	struct iwl_priv *priv = hw->priv;
+	struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv;
+	struct iwl_rxon_context *tmp, *ctx = NULL;
+	int err;
+	enum nl80211_iftype viftype = ieee80211_vif_type_p2p(vif);
+
+	IWL_DEBUG_MAC80211(priv, "enter: type %d, addr %pM\n",
+			   viftype, vif->addr);
+
+	cancel_delayed_work_sync(&priv->hw_roc_disable_work);
+
+	mutex_lock(&priv->shrd->mutex);
+
+	iwlagn_disable_roc(priv);
+
+	if (!iwl_is_ready_rf(priv->shrd)) {
+		IWL_WARN(priv, "Try to add interface when device not ready\n");
+		err = -EINVAL;
+		goto out;
+	}
+
+	for_each_context(priv, tmp) {
+		u32 possible_modes =
+			tmp->interface_modes | tmp->exclusive_interface_modes;
+
+		if (tmp->vif) {
+			/* check if this busy context is exclusive */
+			if (tmp->exclusive_interface_modes &
+						BIT(tmp->vif->type)) {
+				err = -EINVAL;
+				goto out;
+			}
+			continue;
+		}
+
+		if (!(possible_modes & BIT(viftype)))
+			continue;
+
+		/* have maybe usable context w/o interface */
+		ctx = tmp;
+		break;
+	}
+
+	if (!ctx) {
+		err = -EOPNOTSUPP;
+		goto out;
+	}
+
+	vif_priv->ctx = ctx;
+	ctx->vif = vif;
+
+	err = iwl_setup_interface(priv, ctx);
+	if (!err)
+		goto out;
+
+	ctx->vif = NULL;
+	priv->iw_mode = NL80211_IFTYPE_STATION;
+ out:
+	mutex_unlock(&priv->shrd->mutex);
+
+	IWL_DEBUG_MAC80211(priv, "leave\n");
+	return err;
+}
+
+static void iwl_teardown_interface(struct iwl_priv *priv,
+				   struct ieee80211_vif *vif,
+				   bool mode_change)
+{
+	struct iwl_rxon_context *ctx = iwl_rxon_ctx_from_vif(vif);
+
+	lockdep_assert_held(&priv->shrd->mutex);
+
+	if (priv->scan_vif == vif) {
+		iwl_scan_cancel_timeout(priv, 200);
+		iwl_force_scan_end(priv);
+	}
+
+	if (!mode_change) {
+		iwl_set_mode(priv, ctx);
+		if (!ctx->always_active)
+			ctx->is_active = false;
+	}
+
+	/*
+	 * When removing the IBSS interface, overwrite the
+	 * BT traffic load with the stored one from the last
+	 * notification, if any. If this is a device that
+	 * doesn't implement this, this has no effect since
+	 * both values are the same and zero.
+	 */
+	if (vif->type == NL80211_IFTYPE_ADHOC)
+		priv->bt_traffic_load = priv->last_bt_traffic_load;
+}
+
+static void iwlagn_mac_remove_interface(struct ieee80211_hw *hw,
+			      struct ieee80211_vif *vif)
+{
+	struct iwl_priv *priv = hw->priv;
+	struct iwl_rxon_context *ctx = iwl_rxon_ctx_from_vif(vif);
+
+	IWL_DEBUG_MAC80211(priv, "enter\n");
+
+	mutex_lock(&priv->shrd->mutex);
+
+	if (WARN_ON(ctx->vif != vif)) {
+		struct iwl_rxon_context *tmp;
+		IWL_ERR(priv, "ctx->vif = %p, vif = %p\n", ctx->vif, vif);
+		for_each_context(priv, tmp)
+			IWL_ERR(priv, "\tID = %d:\tctx = %p\tctx->vif = %p\n",
+				tmp->ctxid, tmp, tmp->vif);
+	}
+	ctx->vif = NULL;
+
+	iwl_teardown_interface(priv, vif, false);
+
+	mutex_unlock(&priv->shrd->mutex);
+
+	IWL_DEBUG_MAC80211(priv, "leave\n");
+
+}
+
+static int iwlagn_mac_change_interface(struct ieee80211_hw *hw,
+				struct ieee80211_vif *vif,
+				enum nl80211_iftype newtype, bool newp2p)
+{
+	struct iwl_priv *priv = hw->priv;
+	struct iwl_rxon_context *ctx = iwl_rxon_ctx_from_vif(vif);
+	struct iwl_rxon_context *bss_ctx = &priv->contexts[IWL_RXON_CTX_BSS];
+	struct iwl_rxon_context *tmp;
+	enum nl80211_iftype newviftype = newtype;
+	u32 interface_modes;
+	int err;
+
+	IWL_DEBUG_MAC80211(priv, "enter\n");
+
+	newtype = ieee80211_iftype_p2p(newtype, newp2p);
+
+	mutex_lock(&priv->shrd->mutex);
+
+	if (!ctx->vif || !iwl_is_ready_rf(priv->shrd)) {
+		/*
+		 * Huh? But wait ... this can maybe happen when
+		 * we're in the middle of a firmware restart!
+		 */
+		err = -EBUSY;
+		goto out;
+	}
+
+	interface_modes = ctx->interface_modes | ctx->exclusive_interface_modes;
+
+	if (!(interface_modes & BIT(newtype))) {
+		err = -EBUSY;
+		goto out;
+	}
+
+	/*
+	 * Refuse a change that should be done by moving from the PAN
+	 * context to the BSS context instead, if the BSS context is
+	 * available and can support the new interface type.
+	 */
+	if (ctx->ctxid == IWL_RXON_CTX_PAN && !bss_ctx->vif &&
+	    (bss_ctx->interface_modes & BIT(newtype) ||
+	     bss_ctx->exclusive_interface_modes & BIT(newtype))) {
+		BUILD_BUG_ON(NUM_IWL_RXON_CTX != 2);
+		err = -EBUSY;
+		goto out;
+	}
+
+	if (ctx->exclusive_interface_modes & BIT(newtype)) {
+		for_each_context(priv, tmp) {
+			if (ctx == tmp)
+				continue;
+
+			if (!tmp->vif)
+				continue;
+
+			/*
+			 * The current mode switch would be exclusive, but
+			 * another context is active ... refuse the switch.
+			 */
+			err = -EBUSY;
+			goto out;
+		}
+	}
+
+	/* success */
+	iwl_teardown_interface(priv, vif, true);
+	vif->type = newviftype;
+	vif->p2p = newp2p;
+	err = iwl_setup_interface(priv, ctx);
+	WARN_ON(err);
+	/*
+	 * We've switched internally, but submitting to the
+	 * device may have failed for some reason. Mask this
+	 * error, because otherwise mac80211 will not switch
+	 * (and set the interface type back) and we'll be
+	 * out of sync with it.
+	 */
+	err = 0;
+
+ out:
+	mutex_unlock(&priv->shrd->mutex);
+	IWL_DEBUG_MAC80211(priv, "leave\n");
+
+	return err;
+}
+
 struct ieee80211_ops iwlagn_hw_ops = {
 	.tx = iwlagn_mac_tx,
 	.start = iwlagn_mac_start,