[PATCH] m68knommu: read/write register access for ColdFire core timer
Modify the m68knommu/ColdFire core timer code to use register offsets
with raw_read/raw_write access, instead of a mapped struct.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
diff --git a/arch/m68knommu/platform/5307/timers.c b/arch/m68knommu/platform/5307/timers.c
index ef49596..83b8b89 100644
--- a/arch/m68knommu/platform/5307/timers.c
+++ b/arch/m68knommu/platform/5307/timers.c
@@ -14,6 +14,7 @@
#include <linux/param.h>
#include <linux/interrupt.h>
#include <linux/init.h>
+#include <asm/io.h>
#include <asm/irq.h>
#include <asm/traps.h>
#include <asm/machdep.h>
@@ -24,6 +25,11 @@
/***************************************************************************/
/*
+ * By default use timer1 as the system clock timer.
+ */
+#define TA(a) (MCF_MBAR + MCFTIMER_BASE1 + (a))
+
+/*
* Default the timer and vector to use for ColdFire. Some ColdFire
* CPU's and some boards may want different. Their sub-architecture
* startup code (in config.c) can change these if they want.
@@ -32,8 +38,6 @@
unsigned int mcf_profilevector = 31;
unsigned int mcf_timerlevel = 5;
-static volatile struct mcftimer *mcf_timerp;
-
/*
* These provide the underlying interrupt vector support.
* Unfortunately it is a little different on each ColdFire.
@@ -46,20 +50,17 @@
void coldfire_tick(void)
{
/* Reset the ColdFire timer */
- mcf_timerp->ter = MCFTIMER_TER_CAP | MCFTIMER_TER_REF;
+ __raw_writeb(MCFTIMER_TER_CAP | MCFTIMER_TER_REF, TA(MCFTIMER_TER));
}
/***************************************************************************/
void coldfire_timer_init(irqreturn_t (*handler)(int, void *, struct pt_regs *))
{
- /* Set up an internal TIMER as poll clock */
- mcf_timerp = (volatile struct mcftimer *) (MCF_MBAR + MCFTIMER_BASE1);
- mcf_timerp->tmr = MCFTIMER_TMR_DISABLE;
-
- mcf_timerp->trr = (unsigned short) ((MCF_BUSCLK / 16) / HZ);
- mcf_timerp->tmr = MCFTIMER_TMR_ENORI | MCFTIMER_TMR_CLK16 |
- MCFTIMER_TMR_RESTART | MCFTIMER_TMR_ENABLE;
+ __raw_writew(MCFTIMER_TMR_DISABLE, TA(MCFTIMER_TMR));
+ __raw_writew(((MCF_BUSCLK / 16) / HZ), TA(MCFTIMER_TRR));
+ __raw_writew(MCFTIMER_TMR_ENORI | MCFTIMER_TMR_CLK16 |
+ MCFTIMER_TMR_RESTART | MCFTIMER_TMR_ENABLE, TA(MCFTIMER_TMR));
request_irq(mcf_timervector, handler, SA_INTERRUPT, "timer", NULL);
mcf_settimericr(1, mcf_timerlevel);
@@ -75,13 +76,8 @@
{
unsigned long trr, tcn, offset;
- /*
- * The change to pointer and de-reference is to force the compiler
- * to read the registers with a single 16bit access. Otherwise it
- * does some crazy 8bit read combining.
- */
- tcn = *(&mcf_timerp->tcn);
- trr = *(&mcf_timerp->trr);
+ tcn = __raw_readw(TA(MCFTIMER_TCN));
+ trr = __raw_readw(TA(MCFTIMER_TRR));
offset = (tcn * (1000000 / HZ)) / trr;
/* Check if we just wrapped the counters and maybe missed a tick */
@@ -95,21 +91,23 @@
/***************************************************************************/
/*
+ * By default use timer2 as the profiler clock timer.
+ */
+#define PA(a) (MCF_MBAR + MCFTIMER_BASE2 + (a))
+
+/*
* Choose a reasonably fast profile timer. Make it an odd value to
* try and get good coverage of kernal operations.
*/
#define PROFILEHZ 1013
-static volatile struct mcftimer *mcf_proftp;
-
/*
* Use the other timer to provide high accuracy profiling info.
*/
-
void coldfire_profile_tick(int irq, void *dummy, struct pt_regs *regs)
{
/* Reset ColdFire timer2 */
- mcf_proftp->ter = MCFTIMER_TER_CAP | MCFTIMER_TER_REF;
+ __raw_writeb(MCFTIMER_TER_CAP | MCFTIMER_TER_REF, PA(MCFTIMER_TER));
if (current->pid)
profile_tick(CPU_PROFILING, regs);
}
@@ -121,12 +119,11 @@
printk(KERN_INFO "PROFILE: lodging TIMER2 @ %dHz as profile timer\n", PROFILEHZ);
/* Set up TIMER 2 as high speed profile clock */
- mcf_proftp = (volatile struct mcftimer *) (MCF_MBAR + MCFTIMER_BASE2);
- mcf_proftp->tmr = MCFTIMER_TMR_DISABLE;
+ __raw_writew(MCFTIMER_TMR_DISABLE, PA(MCFTIMER_TMR));
- mcf_proftp->trr = (unsigned short) ((MCF_CLK / 16) / PROFILEHZ);
- mcf_proftp->tmr = MCFTIMER_TMR_ENORI | MCFTIMER_TMR_CLK16 |
- MCFTIMER_TMR_RESTART | MCFTIMER_TMR_ENABLE;
+ __raw_writew(((MCF_CLK / 16) / PROFILEHZ), PA(MCFTIMER_TRR));
+ __raw_writew(MCFTIMER_TMR_ENORI | MCFTIMER_TMR_CLK16 |
+ MCFTIMER_TMR_RESTART | MCFTIMER_TMR_ENABLE, PA(MCFTIMER_TMR));
request_irq(mcf_profilevector, coldfire_profile_tick,
(SA_INTERRUPT | IRQ_FLG_FAST), "profile timer", NULL);