[ARM] 2918/1: [update] Base port of Comdial MP1000 platfrom

Patch from Jon Ringle

Updated 2898/1 per comments:
- Removed fixup
- Moved code in mach-mp1000/ to mach-clps711x/
- Cleaned up code in mp1000-seprom.c. Eliminated code that displayed the contents of the eeprom
Please comment.

Signed-off-by: Jon Ringle
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 11fff04..d885cc4 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -687,7 +687,8 @@
 
 if PCMCIA || ARCH_CLPS7500 || ARCH_IOP3XX || ARCH_IXP4XX \
 	|| ARCH_L7200 || ARCH_LH7A40X || ARCH_PXA || ARCH_RPC \
-	|| ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE
+	|| ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE \
+	|| MACH_MP1000
 source "drivers/ide/Kconfig"
 endif
 
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 7c7f475..a54d2eb 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -39,7 +39,8 @@
     defined(CONFIG_ARCH_IXP4XX) || \
     defined(CONFIG_ARCH_IXP2000) || \
     defined(CONFIG_ARCH_LH7A40X) || \
-    defined(CONFIG_ARCH_OMAP)
+    defined(CONFIG_ARCH_OMAP) || \
+    defined(CONFIG_MACH_MP1000)
 		.macro	loadsp,	rb
 		addruart \rb
 		.endm
diff --git a/arch/arm/configs/mp1000_defconfig b/arch/arm/configs/mp1000_defconfig
new file mode 100644
index 0000000..d2cbc6f
--- /dev/null
+++ b/arch/arm/configs/mp1000_defconfig
@@ -0,0 +1,897 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.14-rc1
+# Fri Sep 16 15:48:13 2005
+#
+CONFIG_ARM=y
+CONFIG_MMU=y
+CONFIG_UID16=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+# CONFIG_CLEAN_COMPILE is not set
+CONFIG_BROKEN=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_KOBJECT_UEVENT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_CLPS7500 is not set
+CONFIG_ARCH_CLPS711X=y
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_CAMELOT is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_IOP3XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_AAEC2000 is not set
+
+#
+# CLPS711X/EP721X Implementations
+#
+# CONFIG_ARCH_AUTCPU12 is not set
+# CONFIG_ARCH_CDB89712 is not set
+# CONFIG_ARCH_CEIVA is not set
+# CONFIG_ARCH_CLEP7312 is not set
+# CONFIG_ARCH_EDB7211 is not set
+# CONFIG_ARCH_P720T is not set
+# CONFIG_ARCH_FORTUNET is not set
+CONFIG_MACH_MP1000=y
+CONFIG_MP1000_90MHZ=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM720T=y
+CONFIG_CPU_32v4=y
+CONFIG_CPU_ABRT_LV4T=y
+CONFIG_CPU_CACHE_V4=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WT=y
+CONFIG_CPU_TLB_V4WT=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+
+#
+# Bus support
+#
+CONFIG_ISA_DMA_API=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_SMP is not set
+CONFIG_PREEMPT=y
+# CONFIG_NO_IDLE_HZ is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttyCL,38400 root=/dev/discs/disc0/part1 ip=any cs89x0_media=rj45"
+# CONFIG_XIP_KERNEL is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+CONFIG_MTD_DEBUG=y
+CONFIG_MTD_DEBUG_VERBOSE=3
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_REDBOOT_PARTS=m
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-2
+CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=m
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=m
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_2 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+# CONFIG_MTD_CFI_I1 is not set
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=m
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=m
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+# CONFIG_MTD_XIP is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=m
+CONFIG_MTD_PHYSMAP_START=0x0000000
+CONFIG_MTD_PHYSMAP_LEN=0x4000000
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+CONFIG_MTD_EDB7312=m
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLKMTD is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+CONFIG_MTD_NAND_MP1000=y
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=2
+CONFIG_BLK_DEV_RAM_SIZE=16384
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+# CONFIG_BLK_DEV_HD_IDE is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+# CONFIG_IDE_GENERIC is not set
+CONFIG_IDE_ARM=y
+CONFIG_BLK_DEV_IDE_MP1000=y
+# CONFIG_BLK_DEV_IDEDMA is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+CONFIG_MD=y
+# CONFIG_BLK_DEV_MD is not set
+CONFIG_BLK_DEV_DM=y
+# CONFIG_DM_CRYPT is not set
+# CONFIG_DM_SNAPSHOT is not set
+# CONFIG_DM_MIRROR is not set
+# CONFIG_DM_ZERO is not set
+# CONFIG_DM_MULTIPATH is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+CONFIG_CS89x0=y
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+CONFIG_INPUT_EVBUG=y
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_LIBPS2 is not set
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=2
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CLPS711X=y
+CONFIG_SERIAL_CLPS711X_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+CONFIG_NVRAM=y
+CONFIG_RTC=y
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB is not set
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+# CONFIG_EXT2_FS_POSIX_ACL is not set
+# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+# CONFIG_REISERFS_FS_XATTR is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_QUOTA=y
+# CONFIG_QFMT_V1 is not set
+# CONFIG_QFMT_V2 is not set
+CONFIG_QUOTACTL=y
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=m
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=y
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+CONFIG_NFSD_V4=y
+CONFIG_NFSD_TCP=y
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_MAGIC_SYSRQ is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_FS is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_WAITQ=y
+CONFIG_DEBUG_ERRORS=y
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_DEBUG_CLPS711X_UART2 is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/arm/mach-clps711x/Kconfig b/arch/arm/mach-clps711x/Kconfig
index 0793dcf..d5c1550 100644
--- a/arch/arm/mach-clps711x/Kconfig
+++ b/arch/arm/mach-clps711x/Kconfig
@@ -69,6 +69,17 @@
 
 	  You almost surely want to say N here.
 
+config MACH_MP1000
+	bool "MACH_MP1000"
+	help
+	  Say Y if you intend to run the kernel on the Comdial MP1000 platform.
+
+config MP1000_90MHZ
+	bool "MP1000_90MHZ"
+	depends on MACH_MP1000
+	help
+	  Say Y if you have the MP1000 configured to be set at 90MHZ rather than 74MHZ
+
 endmenu
 
 endif
diff --git a/arch/arm/mach-clps711x/Makefile b/arch/arm/mach-clps711x/Makefile
index 4a19731..8a6dc1c 100644
--- a/arch/arm/mach-clps711x/Makefile
+++ b/arch/arm/mach-clps711x/Makefile
@@ -15,6 +15,7 @@
 obj-$(CONFIG_ARCH_CLEP7312) += clep7312.o
 obj-$(CONFIG_ARCH_EDB7211)  += edb7211-arch.o edb7211-mm.o
 obj-$(CONFIG_ARCH_FORTUNET) += fortunet.o
+obj-$(CONFIG_MACH_MP1000)   += mp1000-mach.o mp1000-mm.o mp1000-seprom.o
 obj-$(CONFIG_ARCH_P720T)    += p720t.o
 leds-$(CONFIG_ARCH_P720T)   += p720t-leds.o
 obj-$(CONFIG_LEDS)          += $(leds-y)
diff --git a/arch/arm/mach-clps711x/mp1000-mach.c b/arch/arm/mach-clps711x/mp1000-mach.c
new file mode 100644
index 0000000..c2816bc
--- /dev/null
+++ b/arch/arm/mach-clps711x/mp1000-mach.c
@@ -0,0 +1,49 @@
+/*
+ *  linux/arch/arm/mach-mp1000/mp1000.c
+ *
+ *  Copyright (C) 2005 Comdial Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/string.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/arch/mp1000-seprom.h>
+
+#include "common.h"
+
+extern void mp1000_map_io(void);
+
+static void __init mp1000_init(void)
+{
+    seprom_init();
+}
+
+MACHINE_START(MP1000, "Comdial MP1000")
+	/* Maintainer: Jon Ringle */
+	.phys_ram	= 0xc0000000,
+	.phys_io	= 0x80000000,
+	.io_pg_offst	= ((0xff000000) >> 18) & 0xfffc,
+	.boot_params	= 0xc0015100,
+	.map_io		= mp1000_map_io,
+	.init_irq	= clps711x_init_irq,
+	.init_machine	= mp1000_init,
+	.timer		= &clps711x_timer,
+MACHINE_END
+
diff --git a/arch/arm/mach-clps711x/mp1000-mm.c b/arch/arm/mach-clps711x/mp1000-mm.c
new file mode 100644
index 0000000..20e810b
--- /dev/null
+++ b/arch/arm/mach-clps711x/mp1000-mm.c
@@ -0,0 +1,47 @@
+/*
+ *  linux/arch/arm/mach-mp1000/mm.c
+ *
+ *  Extra MM routines for the MP1000
+ *
+ *  Copyright (C) 2005 Comdial Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/hardware.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/sizes.h>
+
+#include <asm/mach/map.h>
+
+extern void clps711x_map_io(void);
+
+static struct map_desc mp1000_io_desc[] __initdata = {
+    { MP1000_EIO_BASE,	MP1000_EIO_START,	MP1000_EIO_SIZE, MT_DEVICE },
+    { MP1000_FIO_BASE,	MP1000_FIO_START,	MP1000_FIO_SIZE, MT_DEVICE },
+    { MP1000_LIO_BASE,	MP1000_LIO_START,	MP1000_LIO_SIZE, MT_DEVICE },
+    { MP1000_NIO_BASE,	MP1000_NIO_START,	MP1000_NIO_SIZE, MT_DEVICE },
+    { MP1000_IDE_BASE,	MP1000_IDE_START,	MP1000_IDE_SIZE, MT_DEVICE },
+    { MP1000_DSP_BASE,	MP1000_DSP_START,	MP1000_DSP_SIZE, MT_DEVICE }
+};
+
+void __init mp1000_map_io(void)
+{
+	clps711x_map_io();
+	iotable_init(mp1000_io_desc, ARRAY_SIZE(mp1000_io_desc));
+}
diff --git a/arch/arm/mach-clps711x/mp1000-seprom.c b/arch/arm/mach-clps711x/mp1000-seprom.c
new file mode 100644
index 0000000..b22d0be
--- /dev/null
+++ b/arch/arm/mach-clps711x/mp1000-seprom.c
@@ -0,0 +1,195 @@
+/*`
+ * mp1000-seprom.c
+ *
+ *  This file contains the Serial EEPROM code for the MP1000 board
+ *
+ *  Copyright (C) 2005 Comdial Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <asm/hardware.h>
+#include <asm/hardware/clps7111.h>
+#include <asm/arch/mp1000-seprom.h>
+
+/* If SepromInit() can initialize and checksum the seprom successfully, */
+/* then it will point seprom_data_ptr at the shadow copy.  */
+
+static eeprom_struct seprom_data;			/* shadow copy of seprom content */
+
+eeprom_struct *seprom_data_ptr = 0;		/* 0 => not initialized */
+
+/*
+ * Port D Bit 5 is Chip Select for EEPROM
+ * Port E Bit 0 is Input, Data out from EEPROM
+ * Port E Bit 1 is Output, Data in to EEPROM
+ * Port E Bit 2 is Output, CLK to EEPROM
+ */
+
+static char *port_d_ptr = (char *)(CLPS7111_VIRT_BASE + PDDR);
+static char *port_e_ptr = (char *)(CLPS7111_VIRT_BASE + PEDR);
+
+#define NO_OF_SHORTS	64	// Device is 64 x 16 bits
+#define ENABLE_RW	0
+#define DISABLE_RW	1
+
+static inline void toggle_seprom_clock(void)
+{
+	*port_e_ptr |= HwPortESepromCLK;
+	*port_e_ptr &= ~(HwPortESepromCLK);
+}
+
+static inline void select_eeprom(void)
+{
+	*port_d_ptr |= HwPortDEECS;
+	*port_e_ptr &= ~(HwPortESepromCLK);
+}
+
+static inline void deselect_eeprom(void)
+{
+	*port_d_ptr &= ~(HwPortDEECS);
+	*port_e_ptr &= ~(HwPortESepromDIn);
+}
+
+/*
+ * GetSepromDataPtr - returns pointer to shadow (RAM) copy of seprom
+ *                    and returns 0 if seprom is not initialized or
+ *                    has a checksum error.
+ */
+
+eeprom_struct* get_seprom_ptr(void)
+{
+	return seprom_data_ptr;
+}
+
+unsigned char* get_eeprom_mac_address(void)
+{
+	return seprom_data_ptr->variant.eprom_struct.mac_Address;
+}
+
+/*
+ * ReadSProm, Physically reads data from the Serial PROM
+ */
+static void read_sprom(short address, int length, eeprom_struct *buffer)
+{
+	short data = COMMAND_READ | (address & 0x3F);
+	short bit;
+	int i;
+
+	select_eeprom();
+
+	// Clock in 9 bits of the command
+	for (i = 0, bit = 0x100; i < 9; i++, bit >>= 1) {
+		if (data & bit)
+			*port_e_ptr |= HwPortESepromDIn;
+		else
+			*port_e_ptr &= ~(HwPortESepromDIn);
+
+		toggle_seprom_clock();
+	}
+
+	//
+	// Now read one or more shorts of data from the Seprom
+	//
+	while (length-- > 0) {
+		data = 0;
+
+		// Read 16 bits at a time
+		for (i = 0; i < 16; i++) {
+			data <<= 1;
+			toggle_seprom_clock();
+			data |= *port_e_ptr & HwPortESepromDOut;
+
+		}
+
+		buffer->variant.eprom_short_data[address++] = data;
+	}
+
+	deselect_eeprom();
+
+	return;
+}
+
+
+
+/*
+ * ReadSerialPROM
+ *
+ * Input: Pointer to array of 64 x 16 Bits
+ *
+ * Output: if no problem reading data is filled in
+ */
+static void read_serial_prom(eeprom_struct *data)
+{
+	read_sprom(0, 64, data);
+}
+
+
+//
+// Compute Serial EEPROM checksum
+//
+// Input: Pointer to struct with Eprom data
+//
+// Output: The computed Eprom checksum
+//
+static short compute_seprom_checksum(eeprom_struct *data)
+{
+	short checksum = 0;
+	int i;
+
+	for (i = 0; i < 126; i++) {
+		checksum += (short)data->variant.eprom_byte_data[i];
+	}
+
+	return((short)(0x5555 - (checksum & 0xFFFF)));
+}
+
+//
+// Make sure the data port bits for the SEPROM are correctly initialised
+//
+
+void __init seprom_init(void)
+{
+	short checksum;
+
+	// Init Port D
+	*(char *)(CLPS7111_VIRT_BASE + PDDDR) = 0x0;
+	*(char *)(CLPS7111_VIRT_BASE + PDDR) = 0x15;
+
+	// Init Port E
+	*(int *)(CLPS7111_VIRT_BASE + PEDDR) = 0x06;
+	*(int *)(CLPS7111_VIRT_BASE + PEDR) = 0x04;
+
+	//
+	// Make sure that EEPROM struct size never exceeds 128 bytes
+	//
+	if (sizeof(eeprom_struct) > 128) {
+		panic("Serial PROM struct size > 128, aborting read\n");
+	}
+
+	read_serial_prom(&seprom_data);
+
+	checksum = compute_seprom_checksum(&seprom_data);
+
+	if (checksum != seprom_data.variant.eprom_short_data[63]) {
+		panic("Serial EEPROM checksum failed\n");
+	}
+
+	seprom_data_ptr = &seprom_data;
+}
+
diff --git a/drivers/serial/clps711x.c b/drivers/serial/clps711x.c
index 87ef368..6a67e8f 100644
--- a/drivers/serial/clps711x.c
+++ b/drivers/serial/clps711x.c
@@ -408,7 +408,11 @@
 	{
 		.iobase		= SYSCON1,
 		.irq		= IRQ_UTXINT1, /* IRQ_URXINT1, IRQ_UMSINT */
+#ifdef CONFIG_MP1000_90MHZ
+		.uartclk	= 4515840,
+#else
 		.uartclk	= 3686400,
+#endif
 		.fifosize	= 16,
 		.ops		= &clps711x_pops,
 		.line		= 0,
@@ -417,7 +421,11 @@
 	{
 		.iobase		= SYSCON2,
 		.irq		= IRQ_UTXINT2, /* IRQ_URXINT2 */
+#ifdef CONFIG_MP1000_90MHZ
+		.uartclk	= 4515840,
+#else
 		.uartclk	= 3686400,
+#endif
 		.fifosize	= 16,
 		.ops		= &clps711x_pops,
 		.line		= 1,
@@ -551,6 +559,7 @@
 static struct uart_driver clps711x_reg = {
 	.driver_name		= "ttyCL",
 	.dev_name		= "ttyCL",
+	.devfs_name		= "ttyCL",
 	.major			= SERIAL_CLPS711X_MAJOR,
 	.minor			= SERIAL_CLPS711X_MINOR,
 	.nr			= UART_NR,
diff --git a/include/asm-arm/arch-clps711x/hardware.h b/include/asm-arm/arch-clps711x/hardware.h
index 1386871..f864c36 100644
--- a/include/asm-arm/arch-clps711x/hardware.h
+++ b/include/asm-arm/arch-clps711x/hardware.h
@@ -235,4 +235,121 @@
 #define CEIVA_PB0_BLK_BTN	(1<<0)
 #endif // #if defined (CONFIG_ARCH_CEIVA)
 
+#if defined (CONFIG_MACH_MP1000)
+/* NOR FLASH */
+#define MP1000_NIO_BASE		0xf9000000	/* virtual */
+#define MP1000_NIO_START	CS0_PHYS_BASE	/* physical */
+#define MP1000_NIO_SIZE		0x00400000
+
+/* DSP Interface */
+#define MP1000_DSP_BASE		0xfa000000	/* virtual */
+#define MP1000_DSP_START	CS1_PHYS_BASE	/* physical */
+#define MP1000_DSP_SIZE		0x00100000
+
+/* LCD, DAA/DSP, RTC, DAA RW Reg all in CS2 */
+#define MP1000_LIO_BASE		0xfb000000	/* virtual */
+#define MP1000_LIO_START	CS2_PHYS_BASE	/* physical */
+#define MP1000_LIO_SIZE		0x00100000
+
+/* NAND FLASH */
+#define MP1000_FIO_BASE		0xfc000000	/* virtual */
+#define MP1000_FIO_START	CS3_PHYS_BASE	/* physical */
+#define MP1000_FIO_SIZE		0x00800000
+
+/* Ethernet */
+#define MP1000_EIO_BASE		0xfd000000	/* virtual 	*/
+#define MP1000_EIO_START	CS4_PHYS_BASE	/* physical 	*/
+#define MP1000_EIO_SIZE		0x00100000
+
+#define	MP1000_LCD_OFFSET	0x00000000	/* LCD offset in CS2 */
+#define	MP1000_DDD_OFFSET	0x00001000	/* DAA/DAI/DSP sft reset offst*/
+#define	MP1000_RTC_OFFSET	0x00002000	/* RTC offset in CS2 */
+#define	MP1000_DAA_OFFSET	0x00003000	/* DAA RW reg offset in CS2 */
+
+/* IDE */
+#define MP1000_IDE_BASE		0xfe000000      /* virtual */
+#define MP1000_IDE_START	CS5_PHYS_BASE      /* physical */
+#define MP1000_IDE_SIZE		0x00100000      /* actually it's only 0x1000 */
+
+#define IRQ_HARDDISK IRQ_EINT2
+
+/*
+ * IDE registers definition
+ */
+
+#define IDE_CONTROL_BASE		(MP1000_IDE_BASE + 0x1000)
+#define IDE_BASE_OFF			(MP1000_IDE_BASE)
+
+#define IDE_WRITE_DEVICE_DATA		(IDE_BASE_OFF + 0x0)
+#define IDE_FEATURES_REGISTER		(IDE_BASE_OFF + 0x2)
+#define IDE_SECTOR_COUNT_REGISTER	(IDE_BASE_OFF + 0x4)
+#define IDE_SECTOR_NUMBER_REGISTER	(IDE_BASE_OFF + 0x6)
+#define IDE_CYLINDER_LOW_REGISTER	(IDE_BASE_OFF + 0x8)
+#define IDE_CYLINDER_HIGH_REGISTER	(IDE_BASE_OFF + 0xa)
+#define IDE_DEVICE_HEAD_REGISTER	(IDE_BASE_OFF + 0xc)
+#define IDE_COMMAND_DATA_REGISTER	(IDE_BASE_OFF + 0xe)
+#define IDE_DEVICE_CONTROL_REGISTER	(IDE_CONTROL_BASE + 0xc)
+
+#define IDE_IRQ                      IRQ_EINT2
+
+
+#define RTC_PORT(x)	(MP1000_LIO_BASE+0x2000 + (x*2))
+#define RTC_ALWAYS_BCD	0
+
+/*
+// Definitions of the bit fields in the HwPortA register for the
+// MP1000 board.
+*/
+#define HwPortAKeyboardRow1                     0x00000001
+#define HwPortAKeyboardRow2                     0x00000002
+#define HwPortAKeyboardRow3                     0x00000004
+#define HwPortAKeyboardRow4                     0x00000008
+#define HwPortAKeyboardRow5                     0x00000010
+#define HwPortAKeyboardRow6                     0x00000020
+#define HwPortALCDEnable                        0x00000040
+#define HwPortAOffhook	                        0x00000080
+
+/*
+// Definitions of the bit fields in the HwPortB register for the
+// MP1000 board.
+*/
+#define HwPortBL3Mode                           0x00000001
+#define HwPortBL3Clk                            0x00000002
+#define HwPortBSClk                             0x00000001
+#define HwPortBSData                            0x00000002
+#define HwPortBL3Data                           0x00000004
+#define HwPortBMute                             0x00000008
+#define HwPortBQD0                              0x00000010
+#define HwPortBQD1                              0x00000020
+#define HwPortBQD2                              0x00000040
+#define HwPortBQD3                              0x00000080
+
+/*
+// Definitions of the bit fields in the HwPortD register for the
+// MP1000 board.
+*/
+#define HwPortDLED1                             0x00000001
+#define HwPortDLED2                             0x00000002
+#define HwPortDLED3                             0x00000004
+#define HwPortDLED4                             0x00000008
+#define HwPortDLED5                             0x00000010
+#define HwPortDEECS                             0x00000020
+#define HwPortBRTS                              0x00000040
+#define HwPortBRI                               0x00000080
+
+
+/*
+// Definitions of the bit fields in the HwPortE register for the
+// MP1000 board.
+*/
+
+#define HwPortECLE                              0x00000001
+#define HwPortESepromDOut                       0x00000001
+#define HwPortEALE                              0x00000002
+#define HwPortESepromDIn                        0x00000002
+#define HwPortENANDCS                           0x00000004
+#define HwPortESepromCLK                        0x00000004
+
+#endif // #if defined (CONFIG_MACH_MP1000)
+
 #endif
diff --git a/include/asm-arm/arch-clps711x/mp1000-seprom.h b/include/asm-arm/arch-clps711x/mp1000-seprom.h
new file mode 100644
index 0000000..3e5566c
--- /dev/null
+++ b/include/asm-arm/arch-clps711x/mp1000-seprom.h
@@ -0,0 +1,77 @@
+#ifndef MP1000_SEPROM_H
+#define MP1000_SEPROM_H
+
+/*
+ * mp1000-seprom.h
+ *
+ *
+ *  This file contains the Serial EEPROM definitions for the MP1000 board
+ *
+ *  Copyright (C) 2005 Comdial Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#define COMMAND_ERASE		(0x1C0)
+#define COMMAND_ERASE_ALL	(0x120)
+#define COMMAND_WRITE_DISABLE	(0x100)
+#define COMMAND_WRITE_ENABLE	(0x130)
+#define COMMAND_READ		(0x180)
+#define COMMAND_WRITE		(0x140)
+#define COMMAND_WRITE_ALL	(0x110)
+
+//
+// Serial EEPROM data format
+//
+
+#define PACKED __attribute__ ((packed))
+
+typedef struct _EEPROM {
+	union {
+		unsigned char eprom_byte_data[128];
+		unsigned short eprom_short_data[64];
+		struct {
+			unsigned char version PACKED;	// EEPROM Version "1" for now
+			unsigned char box_id PACKED; 	// Box ID (Standalone, SOHO, embedded, etc)
+			unsigned char major_hw_version PACKED;	// Major Hardware version (Hex)
+			unsigned char minor_hw_version PACKED;	// Minor Hardware Version (Hex)
+			unsigned char mfg_id[3] PACKED;	// Manufacturer ID (3 character Alphabetic)
+			unsigned char mfg_serial_number[10] PACKED;	// Manufacturer Serial number
+			unsigned char mfg_date[3] PACKED;	// Date of Mfg (Formatted YY:MM:DD)
+			unsigned char country PACKED;	// Country of deployment
+			unsigned char mac_Address[6] PACKED;	// MAC Address
+			unsigned char oem_string[20] PACKED;	// OEM ID string
+			unsigned short feature_bits1 PACKED;	// Feature Bits 1
+			unsigned short feature_bits2 PACKED;	// Feature Bits 2
+			unsigned char filler[75] PACKED;		// Unused/Undefined	“0” initialized
+			unsigned short checksum PACKED;		// byte accumulated short checksum
+		} eprom_struct;
+	} variant;
+}  eeprom_struct;
+
+/* These settings must be mutually exclusive */
+#define	FEATURE_BITS1_DRAMSIZE_16MEG	0x0001  /* 0 signifies 4 MEG system */
+#define	FEATURE_BITS1_DRAMSIZE_8MEG	0x0002  /* 1 in bit 1 = 8MEG system */
+#define	FEATURE_BITS1_DRAMSIZE_64MEG	0x0004  /* 1 in bit 2 = 64MEG system */
+
+#define FEATURE_BITS1_CPUIS90MEG     0x0010
+
+extern void seprom_init(void);
+extern eeprom_struct* get_seprom_ptr(void);
+extern unsigned char* get_eeprom_mac_address(void);
+
+#endif /* MP1000_SEPROM_H */
+