[ARM] pxa/cm-x300: fix mmc numbering
CM-X300 has libertas on mmc2 and SD card slot on mmc1.
This patch fixes wrong MMC ports assignment.
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index aac2cda..102916f 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -43,10 +43,10 @@
#define CM_X300_ETH_PHYS 0x08000010
-#define GPIO82_MMC2_IRQ (82)
-#define GPIO85_MMC2_WP (85)
+#define GPIO82_MMC_IRQ (82)
+#define GPIO85_MMC_WP (85)
-#define CM_X300_MMC2_IRQ IRQ_GPIO(GPIO82_MMC2_IRQ)
+#define CM_X300_MMC_IRQ IRQ_GPIO(GPIO82_MMC_IRQ)
#define GPIO95_RTC_CS (95)
#define GPIO96_RTC_WR (96)
@@ -292,34 +292,34 @@
#endif
#if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
-/* The first MMC slot of CM-X300 is hardwired to Libertas card and has
+static struct pxamci_platform_data cm_x300_mci_platform_data = {
+ .detect_delay = 20,
+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+ .gpio_card_detect = GPIO82_MMC_IRQ,
+ .gpio_card_ro = GPIO85_MMC_WP,
+ .gpio_power = -1,
+};
+
+/* The second MMC slot of CM-X300 is hardwired to Libertas card and has
no detection/ro pins */
-static int cm_x300_mci_init(struct device *dev,
- irq_handler_t cm_x300_detect_int,
- void *data)
+static int cm_x300_mci2_init(struct device *dev,
+ irq_handler_t cm_x300_detect_int,
+ void *data)
{
return 0;
}
-static void cm_x300_mci_exit(struct device *dev, void *data)
+static void cm_x300_mci2_exit(struct device *dev, void *data)
{
}
-static struct pxamci_platform_data cm_x300_mci_platform_data = {
- .detect_delay = 20,
- .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
- .init = cm_x300_mci_init,
- .exit = cm_x300_mci_exit,
- .gpio_card_detect = -1,
- .gpio_card_ro = -1,
- .gpio_power = -1,
-};
-
static struct pxamci_platform_data cm_x300_mci2_platform_data = {
.detect_delay = 20,
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
- .gpio_card_detect = GPIO82_MMC2_IRQ,
- .gpio_card_ro = GPIO85_MMC2_WP,
+ .init = cm_x300_mci2_init,
+ .exit = cm_x300_mci2_exit,
+ .gpio_card_detect = -1,
+ .gpio_card_ro = -1,
.gpio_power = -1,
};