scsi: remove SPRINTF macro
The macro SPRINTF doesn't save a lot of typing or make the code more
readable, and depending on a specific identifier (m) in the
surrounding scope is generally frowned upon. Nuke it.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Christoph Hellwig <hch@lst.de>
diff --git a/drivers/scsi/pcmcia/nsp_cs.c b/drivers/scsi/pcmcia/nsp_cs.c
index 34aad32..83db942 100644
--- a/drivers/scsi/pcmcia/nsp_cs.c
+++ b/drivers/scsi/pcmcia/nsp_cs.c
@@ -1364,9 +1364,6 @@
return data->nspinfo;
}
-#undef SPRINTF
-#define SPRINTF(args...) seq_printf(m, ##args)
-
static int nsp_show_info(struct seq_file *m, struct Scsi_Host *host)
{
int id;
@@ -1378,75 +1375,74 @@
hostno = host->host_no;
data = (nsp_hw_data *)host->hostdata;
- SPRINTF("NinjaSCSI status\n\n");
- SPRINTF("Driver version: $Revision: 1.23 $\n");
- SPRINTF("SCSI host No.: %d\n", hostno);
- SPRINTF("IRQ: %d\n", host->irq);
- SPRINTF("IO: 0x%lx-0x%lx\n", host->io_port, host->io_port + host->n_io_port - 1);
- SPRINTF("MMIO(virtual address): 0x%lx-0x%lx\n", host->base, host->base + data->MmioLength - 1);
- SPRINTF("sg_tablesize: %d\n", host->sg_tablesize);
+ seq_printf(m, "NinjaSCSI status\n\n");
+ seq_printf(m, "Driver version: $Revision: 1.23 $\n");
+ seq_printf(m, "SCSI host No.: %d\n", hostno);
+ seq_printf(m, "IRQ: %d\n", host->irq);
+ seq_printf(m, "IO: 0x%lx-0x%lx\n", host->io_port, host->io_port + host->n_io_port - 1);
+ seq_printf(m, "MMIO(virtual address): 0x%lx-0x%lx\n", host->base, host->base + data->MmioLength - 1);
+ seq_printf(m, "sg_tablesize: %d\n", host->sg_tablesize);
- SPRINTF("burst transfer mode: ");
+ seq_printf(m, "burst transfer mode: ");
switch (nsp_burst_mode) {
case BURST_IO8:
- SPRINTF("io8");
+ seq_printf(m, "io8");
break;
case BURST_IO32:
- SPRINTF("io32");
+ seq_printf(m, "io32");
break;
case BURST_MEM32:
- SPRINTF("mem32");
+ seq_printf(m, "mem32");
break;
default:
- SPRINTF("???");
+ seq_printf(m, "???");
break;
}
- SPRINTF("\n");
+ seq_printf(m, "\n");
spin_lock_irqsave(&(data->Lock), flags);
- SPRINTF("CurrentSC: 0x%p\n\n", data->CurrentSC);
+ seq_printf(m, "CurrentSC: 0x%p\n\n", data->CurrentSC);
spin_unlock_irqrestore(&(data->Lock), flags);
- SPRINTF("SDTR status\n");
+ seq_printf(m, "SDTR status\n");
for(id = 0; id < ARRAY_SIZE(data->Sync); id++) {
- SPRINTF("id %d: ", id);
+ seq_printf(m, "id %d: ", id);
if (id == host->this_id) {
- SPRINTF("----- NinjaSCSI-3 host adapter\n");
+ seq_printf(m, "----- NinjaSCSI-3 host adapter\n");
continue;
}
switch(data->Sync[id].SyncNegotiation) {
case SYNC_OK:
- SPRINTF(" sync");
+ seq_printf(m, " sync");
break;
case SYNC_NG:
- SPRINTF("async");
+ seq_printf(m, "async");
break;
case SYNC_NOT_YET:
- SPRINTF(" none");
+ seq_printf(m, " none");
break;
default:
- SPRINTF("?????");
+ seq_printf(m, "?????");
break;
}
if (data->Sync[id].SyncPeriod != 0) {
speed = 1000000 / (data->Sync[id].SyncPeriod * 4);
- SPRINTF(" transfer %d.%dMB/s, offset %d",
+ seq_printf(m, " transfer %d.%dMB/s, offset %d",
speed / 1000,
speed % 1000,
data->Sync[id].SyncOffset
);
}
- SPRINTF("\n");
+ seq_printf(m, "\n");
}
return 0;
}
-#undef SPRINTF
/*---------------------------------------------------------------*/
/* error handler */