OMAP: add TI TWL92330/Menelaus Power Management chip driver

Add Texas Instruments TWL92330/Menelaus Power Management chip driver.  This
includes voltage regulators, Dual slot memory card tranceivers and
real-time clock(RTC).

The support for RTC is integrated with this driver only; it is not separate
module.  Passes 'rtctest' on OMAP H4 EVM, other than lack of "periodic"
(1/N second) IRQs.  System wakeup alarms (from suspend-to-RAM) work too.

The battery keeps the RTC active over power off, so once you set clock
(rdate/ntpdate/etc, then "hwclock -w") then RTC_HCTOSYS at boot time will
behave as expected.

Cc: "Jean Delvare" <khali@linux-fr.org>
Cc: "Tony Lindgren" <tony@atomide.com>
Cc: "David Brownell" <david-b@pacbell.net>
Signed-off-by: Trilok Soni <soni.trilok@gmail.com>
Acked-by: Alessandro Zummo <alessandro.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/drivers/i2c/chips/menelaus.c b/drivers/i2c/chips/menelaus.c
new file mode 100644
index 0000000..48a7e2f
--- /dev/null
+++ b/drivers/i2c/chips/menelaus.c
@@ -0,0 +1,1281 @@
+#define DEBUG
+/*
+ * Copyright (C) 2004 Texas Instruments, Inc.
+ *
+ * Some parts based tps65010.c:
+ * Copyright (C) 2004 Texas Instruments and
+ * Copyright (C) 2004-2005 David Brownell
+ *
+ * Some parts based on tlv320aic24.c:
+ * Copyright (C) by Kai Svahn <kai.svahn@nokia.com>
+ *
+ * Changes for interrupt handling and clean-up by
+ * Tony Lindgren <tony@atomide.com> and Imre Deak <imre.deak@nokia.com>
+ * Cleanup and generalized support for voltage setting by
+ * Juha Yrjola
+ * Added support for controlling VCORE and regulator sleep states,
+ * Amit Kucheria <amit.kucheria@nokia.com>
+ * Copyright (C) 2005, 2006 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/mutex.h>
+#include <linux/workqueue.h>
+#include <linux/delay.h>
+#include <linux/rtc.h>
+#include <linux/bcd.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/gpio.h>
+#include <asm/arch/menelaus.h>
+
+#define DRIVER_NAME			"menelaus"
+
+#define pr_err(fmt, arg...)	printk(KERN_ERR DRIVER_NAME ": ", ## arg);
+
+#define MENELAUS_I2C_ADDRESS		0x72
+
+#define MENELAUS_REV			0x01
+#define MENELAUS_VCORE_CTRL1		0x02
+#define MENELAUS_VCORE_CTRL2		0x03
+#define MENELAUS_VCORE_CTRL3		0x04
+#define MENELAUS_VCORE_CTRL4		0x05
+#define MENELAUS_VCORE_CTRL5		0x06
+#define MENELAUS_DCDC_CTRL1		0x07
+#define MENELAUS_DCDC_CTRL2		0x08
+#define MENELAUS_DCDC_CTRL3		0x09
+#define MENELAUS_LDO_CTRL1		0x0A
+#define MENELAUS_LDO_CTRL2		0x0B
+#define MENELAUS_LDO_CTRL3		0x0C
+#define MENELAUS_LDO_CTRL4		0x0D
+#define MENELAUS_LDO_CTRL5		0x0E
+#define MENELAUS_LDO_CTRL6		0x0F
+#define MENELAUS_LDO_CTRL7		0x10
+#define MENELAUS_LDO_CTRL8		0x11
+#define MENELAUS_SLEEP_CTRL1		0x12
+#define MENELAUS_SLEEP_CTRL2		0x13
+#define MENELAUS_DEVICE_OFF		0x14
+#define MENELAUS_OSC_CTRL		0x15
+#define MENELAUS_DETECT_CTRL		0x16
+#define MENELAUS_INT_MASK1		0x17
+#define MENELAUS_INT_MASK2		0x18
+#define MENELAUS_INT_STATUS1		0x19
+#define MENELAUS_INT_STATUS2		0x1A
+#define MENELAUS_INT_ACK1		0x1B
+#define MENELAUS_INT_ACK2		0x1C
+#define MENELAUS_GPIO_CTRL		0x1D
+#define MENELAUS_GPIO_IN		0x1E
+#define MENELAUS_GPIO_OUT		0x1F
+#define MENELAUS_BBSMS			0x20
+#define MENELAUS_RTC_CTRL		0x21
+#define MENELAUS_RTC_UPDATE		0x22
+#define MENELAUS_RTC_SEC		0x23
+#define MENELAUS_RTC_MIN		0x24
+#define MENELAUS_RTC_HR			0x25
+#define MENELAUS_RTC_DAY		0x26
+#define MENELAUS_RTC_MON		0x27
+#define MENELAUS_RTC_YR			0x28
+#define MENELAUS_RTC_WKDAY		0x29
+#define MENELAUS_RTC_AL_SEC		0x2A
+#define MENELAUS_RTC_AL_MIN		0x2B
+#define MENELAUS_RTC_AL_HR		0x2C
+#define MENELAUS_RTC_AL_DAY		0x2D
+#define MENELAUS_RTC_AL_MON		0x2E
+#define MENELAUS_RTC_AL_YR		0x2F
+#define MENELAUS_RTC_COMP_MSB		0x30
+#define MENELAUS_RTC_COMP_LSB		0x31
+#define MENELAUS_S1_PULL_EN		0x32
+#define MENELAUS_S1_PULL_DIR		0x33
+#define MENELAUS_S2_PULL_EN		0x34
+#define MENELAUS_S2_PULL_DIR		0x35
+#define MENELAUS_MCT_CTRL1		0x36
+#define MENELAUS_MCT_CTRL2		0x37
+#define MENELAUS_MCT_CTRL3		0x38
+#define MENELAUS_MCT_PIN_ST		0x39
+#define MENELAUS_DEBOUNCE1		0x3A
+
+#define IH_MENELAUS_IRQS		12
+#define MENELAUS_MMC_S1CD_IRQ		0	/* MMC slot 1 card change */
+#define MENELAUS_MMC_S2CD_IRQ		1	/* MMC slot 2 card change */
+#define MENELAUS_MMC_S1D1_IRQ		2	/* MMC DAT1 low in slot 1 */
+#define MENELAUS_MMC_S2D1_IRQ		3	/* MMC DAT1 low in slot 2 */
+#define MENELAUS_LOWBAT_IRQ		4	/* Low battery */
+#define MENELAUS_HOTDIE_IRQ		5	/* Hot die detect */
+#define MENELAUS_UVLO_IRQ		6	/* UVLO detect */
+#define MENELAUS_TSHUT_IRQ		7	/* Thermal shutdown */
+#define MENELAUS_RTCTMR_IRQ		8	/* RTC timer */
+#define MENELAUS_RTCALM_IRQ		9	/* RTC alarm */
+#define MENELAUS_RTCERR_IRQ		10	/* RTC error */
+#define MENELAUS_PSHBTN_IRQ		11	/* Push button */
+#define MENELAUS_RESERVED12_IRQ		12	/* Reserved */
+#define MENELAUS_RESERVED13_IRQ		13	/* Reserved */
+#define MENELAUS_RESERVED14_IRQ		14	/* Reserved */
+#define MENELAUS_RESERVED15_IRQ		15	/* Reserved */
+
+static void menelaus_work(struct work_struct *_menelaus);
+
+struct menelaus_chip {
+	struct mutex		lock;
+	struct i2c_client	*client;
+	struct work_struct	work;
+#ifdef CONFIG_RTC_DRV_TWL92330
+	struct rtc_device	*rtc;
+	u8			rtc_control;
+	unsigned		uie:1;
+#endif
+	unsigned		vcore_hw_mode:1;
+	u8			mask1, mask2;
+	void			(*handlers[16])(struct menelaus_chip *);
+	void			(*mmc_callback)(void *data, u8 mask);
+	void			*mmc_callback_data;
+};
+
+static struct menelaus_chip *the_menelaus;
+
+static int menelaus_write_reg(int reg, u8 value)
+{
+	int val = i2c_smbus_write_byte_data(the_menelaus->client, reg, value);
+
+	if (val < 0) {
+		pr_err("write error");
+		return val;
+	}
+
+	return 0;
+}
+
+static int menelaus_read_reg(int reg)
+{
+	int val = i2c_smbus_read_byte_data(the_menelaus->client, reg);
+
+	if (val < 0)
+		pr_err("read error");
+
+	return val;
+}
+
+static int menelaus_enable_irq(int irq)
+{
+	if (irq > 7) {
+		irq -= 8;
+		the_menelaus->mask2 &= ~(1 << irq);
+		return menelaus_write_reg(MENELAUS_INT_MASK2,
+				the_menelaus->mask2);
+	} else {
+		the_menelaus->mask1 &= ~(1 << irq);
+		return menelaus_write_reg(MENELAUS_INT_MASK1,
+				the_menelaus->mask1);
+	}
+}
+
+static int menelaus_disable_irq(int irq)
+{
+	if (irq > 7) {
+		irq -= 8;
+		the_menelaus->mask2 |= (1 << irq);
+		return menelaus_write_reg(MENELAUS_INT_MASK2,
+				the_menelaus->mask2);
+	} else {
+		the_menelaus->mask1 |= (1 << irq);
+		return menelaus_write_reg(MENELAUS_INT_MASK1,
+				the_menelaus->mask1);
+	}
+}
+
+static int menelaus_ack_irq(int irq)
+{
+	if (irq > 7)
+		return menelaus_write_reg(MENELAUS_INT_ACK2, 1 << (irq - 8));
+	else
+		return menelaus_write_reg(MENELAUS_INT_ACK1, 1 << irq);
+}
+
+/* Adds a handler for an interrupt. Does not run in interrupt context */
+static int menelaus_add_irq_work(int irq,
+		void (*handler)(struct menelaus_chip *))
+{
+	int ret = 0;
+
+	mutex_lock(&the_menelaus->lock);
+	the_menelaus->handlers[irq] = handler;
+	ret = menelaus_enable_irq(irq);
+	mutex_unlock(&the_menelaus->lock);
+
+	return ret;
+}
+
+/* Removes handler for an interrupt */
+static int menelaus_remove_irq_work(int irq)
+{
+	int ret = 0;
+
+	mutex_lock(&the_menelaus->lock);
+	ret = menelaus_disable_irq(irq);
+	the_menelaus->handlers[irq] = NULL;
+	mutex_unlock(&the_menelaus->lock);
+
+	return ret;
+}
+
+/*
+ * Gets scheduled when a card detect interrupt happens. Note that in some cases
+ * this line is wired to card cover switch rather than the card detect switch
+ * in each slot. In this case the cards are not seen by menelaus.
+ * FIXME: Add handling for D1 too
+ */
+static void menelaus_mmc_cd_work(struct menelaus_chip *menelaus_hw)
+{
+	int reg;
+	unsigned char card_mask = 0;
+
+	reg = menelaus_read_reg(MENELAUS_MCT_PIN_ST);
+	if (reg < 0)
+		return;
+
+	if (!(reg & 0x1))
+		card_mask |= (1 << 0);
+
+	if (!(reg & 0x2))
+		card_mask |= (1 << 1);
+
+	if (menelaus_hw->mmc_callback)
+		menelaus_hw->mmc_callback(menelaus_hw->mmc_callback_data,
+					  card_mask);
+}
+
+/*
+ * Toggles the MMC slots between open-drain and push-pull mode.
+ */
+int menelaus_set_mmc_opendrain(int slot, int enable)
+{
+	int ret, val;
+
+	if (slot != 1 && slot != 2)
+		return -EINVAL;
+	mutex_lock(&the_menelaus->lock);
+	ret = menelaus_read_reg(MENELAUS_MCT_CTRL1);
+	if (ret < 0) {
+		mutex_unlock(&the_menelaus->lock);
+		return ret;
+	}
+	val = ret;
+	if (slot == 1) {
+		if (enable)
+			val |= 1 << 2;
+		else
+			val &= ~(1 << 2);
+	} else {
+		if (enable)
+			val |= 1 << 3;
+		else
+			val &= ~(1 << 3);
+	}
+	ret = menelaus_write_reg(MENELAUS_MCT_CTRL1, val);
+	mutex_unlock(&the_menelaus->lock);
+
+	return ret;
+}
+EXPORT_SYMBOL(menelaus_set_mmc_opendrain);
+
+int menelaus_set_slot_sel(int enable)
+{
+	int ret;
+
+	mutex_lock(&the_menelaus->lock);
+	ret = menelaus_read_reg(MENELAUS_GPIO_CTRL);
+	if (ret < 0)
+		goto out;
+	ret |= 0x02;
+	if (enable)
+		ret |= 1 << 5;
+	else
+		ret &= ~(1 << 5);
+	ret = menelaus_write_reg(MENELAUS_GPIO_CTRL, ret);
+out:
+	mutex_unlock(&the_menelaus->lock);
+	return ret;
+}
+EXPORT_SYMBOL(menelaus_set_slot_sel);
+
+int menelaus_set_mmc_slot(int slot, int enable, int power, int cd_en)
+{
+	int ret, val;
+
+	if (slot != 1 && slot != 2)
+		return -EINVAL;
+	if (power >= 3)
+		return -EINVAL;
+
+	mutex_lock(&the_menelaus->lock);
+
+	ret = menelaus_read_reg(MENELAUS_MCT_CTRL2);
+	if (ret < 0)
+		goto out;
+	val = ret;
+	if (slot == 1) {
+		if (cd_en)
+			val |= (1 << 4) | (1 << 6);
+		else
+			val &= ~((1 << 4) | (1 << 6));
+	} else {
+		if (cd_en)
+			val |= (1 << 5) | (1 << 7);
+		else
+			val &= ~((1 << 5) | (1 << 7));
+	}
+	ret = menelaus_write_reg(MENELAUS_MCT_CTRL2, val);
+	if (ret < 0)
+		goto out;
+
+	ret = menelaus_read_reg(MENELAUS_MCT_CTRL3);
+	if (ret < 0)
+		goto out;
+	val = ret;
+	if (slot == 1) {
+		if (enable)
+			val |= 1 << 0;
+		else
+			val &= ~(1 << 0);
+	} else {
+		int b;
+
+		if (enable)
+			ret |= 1 << 1;
+		else
+			ret &= ~(1 << 1);
+		b = menelaus_read_reg(MENELAUS_MCT_CTRL2);
+		b &= ~0x03;
+		b |= power;
+		ret = menelaus_write_reg(MENELAUS_MCT_CTRL2, b);
+		if (ret < 0)
+			goto out;
+	}
+	/* Disable autonomous shutdown */
+	val &= ~(0x03 << 2);
+	ret = menelaus_write_reg(MENELAUS_MCT_CTRL3, val);
+out:
+	mutex_unlock(&the_menelaus->lock);
+	return ret;
+}
+EXPORT_SYMBOL(menelaus_set_mmc_slot);
+
+int menelaus_register_mmc_callback(void (*callback)(void *data, u8 card_mask),
+				   void *data)
+{
+	int ret = 0;
+
+	the_menelaus->mmc_callback_data = data;
+	the_menelaus->mmc_callback = callback;
+	ret = menelaus_add_irq_work(MENELAUS_MMC_S1CD_IRQ,
+				    menelaus_mmc_cd_work);
+	if (ret < 0)
+		return ret;
+	ret = menelaus_add_irq_work(MENELAUS_MMC_S2CD_IRQ,
+				    menelaus_mmc_cd_work);
+	if (ret < 0)
+		return ret;
+	ret = menelaus_add_irq_work(MENELAUS_MMC_S1D1_IRQ,
+				    menelaus_mmc_cd_work);
+	if (ret < 0)
+		return ret;
+	ret = menelaus_add_irq_work(MENELAUS_MMC_S2D1_IRQ,
+				    menelaus_mmc_cd_work);
+
+	return ret;
+}
+EXPORT_SYMBOL(menelaus_register_mmc_callback);
+
+void menelaus_unregister_mmc_callback(void)
+{
+	menelaus_remove_irq_work(MENELAUS_MMC_S1CD_IRQ);
+	menelaus_remove_irq_work(MENELAUS_MMC_S2CD_IRQ);
+	menelaus_remove_irq_work(MENELAUS_MMC_S1D1_IRQ);
+	menelaus_remove_irq_work(MENELAUS_MMC_S2D1_IRQ);
+
+	the_menelaus->mmc_callback = NULL;
+	the_menelaus->mmc_callback_data = 0;
+}
+EXPORT_SYMBOL(menelaus_unregister_mmc_callback);
+
+struct menelaus_vtg {
+	const char *name;
+	u8 vtg_reg;
+	u8 vtg_shift;
+	u8 vtg_bits;
+	u8 mode_reg;
+};
+
+struct menelaus_vtg_value {
+	u16 vtg;
+	u16 val;
+};
+
+static int menelaus_set_voltage(const struct menelaus_vtg *vtg, int mV,
+				int vtg_val, int mode)
+{
+	int val, ret;
+	struct i2c_client *c = the_menelaus->client;
+
+	mutex_lock(&the_menelaus->lock);
+	if (vtg == 0)
+		goto set_voltage;
+
+	ret = menelaus_read_reg(vtg->vtg_reg);
+	if (ret < 0)
+		goto out;
+	val = ret & ~(((1 << vtg->vtg_bits) - 1) << vtg->vtg_shift);
+	val |= vtg_val << vtg->vtg_shift;
+
+	dev_dbg(&c->dev, "Setting voltage '%s'"
+			 "to %d mV (reg 0x%02x, val 0x%02x)\n",
+			vtg->name, mV, vtg->vtg_reg, val);
+
+	ret = menelaus_write_reg(vtg->vtg_reg, val);
+	if (ret < 0)
+		goto out;
+set_voltage:
+	ret = menelaus_write_reg(vtg->mode_reg, mode);
+out:
+	mutex_unlock(&the_menelaus->lock);
+	if (ret == 0) {
+		/* Wait for voltage to stabilize */
+		msleep(1);
+	}
+	return ret;
+}
+
+static int menelaus_get_vtg_value(int vtg, const struct menelaus_vtg_value *tbl,
+				  int n)
+{
+	int i;
+
+	for (i = 0; i < n; i++, tbl++)
+		if (tbl->vtg == vtg)
+			return tbl->val;
+	return -EINVAL;
+}
+
+/*
+ * Vcore can be programmed in two ways:
+ * SW-controlled: Required voltage is programmed into VCORE_CTRL1
+ * HW-controlled: Required range (roof-floor) is programmed into VCORE_CTRL3
+ * and VCORE_CTRL4
+ *
+ * Call correct 'set' function accordingly
+ */
+
+static const struct menelaus_vtg_value vcore_values[] = {
+	{ 1000, 0 },
+	{ 1025, 1 },
+	{ 1050, 2 },
+	{ 1075, 3 },
+	{ 1100, 4 },
+	{ 1125, 5 },
+	{ 1150, 6 },
+	{ 1175, 7 },
+	{ 1200, 8 },
+	{ 1225, 9 },
+	{ 1250, 10 },
+	{ 1275, 11 },
+	{ 1300, 12 },
+	{ 1325, 13 },
+	{ 1350, 14 },
+	{ 1375, 15 },
+	{ 1400, 16 },
+	{ 1425, 17 },
+	{ 1450, 18 },
+};
+
+int menelaus_set_vcore_sw(unsigned int mV)
+{
+	int val, ret;
+	struct i2c_client *c = the_menelaus->client;
+
+	val = menelaus_get_vtg_value(mV, vcore_values,
+				     ARRAY_SIZE(vcore_values));
+	if (val < 0)
+		return -EINVAL;
+
+	dev_dbg(&c->dev, "Setting VCORE to %d mV (val 0x%02x)\n", mV, val);
+
+	/* Set SW mode and the voltage in one go. */
+	mutex_lock(&the_menelaus->lock);
+	ret = menelaus_write_reg(MENELAUS_VCORE_CTRL1, val);
+	if (ret == 0)
+		the_menelaus->vcore_hw_mode = 0;
+	mutex_unlock(&the_menelaus->lock);
+	msleep(1);
+
+	return ret;
+}
+
+int menelaus_set_vcore_hw(unsigned int roof_mV, unsigned int floor_mV)
+{
+	int fval, rval, val, ret;
+	struct i2c_client *c = the_menelaus->client;
+
+	rval = menelaus_get_vtg_value(roof_mV, vcore_values,
+				      ARRAY_SIZE(vcore_values));
+	if (rval < 0)
+		return -EINVAL;
+	fval = menelaus_get_vtg_value(floor_mV, vcore_values,
+				      ARRAY_SIZE(vcore_values));
+	if (fval < 0)
+		return -EINVAL;
+
+	dev_dbg(&c->dev, "Setting VCORE FLOOR to %d mV and ROOF to %d mV\n",
+	       floor_mV, roof_mV);
+
+	mutex_lock(&the_menelaus->lock);
+	ret = menelaus_write_reg(MENELAUS_VCORE_CTRL3, fval);
+	if (ret < 0)
+		goto out;
+	ret = menelaus_write_reg(MENELAUS_VCORE_CTRL4, rval);
+	if (ret < 0)
+		goto out;
+	if (!the_menelaus->vcore_hw_mode) {
+		val = menelaus_read_reg(MENELAUS_VCORE_CTRL1);
+		/* HW mode, turn OFF byte comparator */
+		val |= ((1 << 7) | (1 << 5));
+		ret = menelaus_write_reg(MENELAUS_VCORE_CTRL1, val);
+		the_menelaus->vcore_hw_mode = 1;
+	}
+	msleep(1);
+out:
+	mutex_unlock(&the_menelaus->lock);
+	return ret;
+}
+
+static const struct menelaus_vtg vmem_vtg = {
+	.name = "VMEM",
+	.vtg_reg = MENELAUS_LDO_CTRL1,
+	.vtg_shift = 0,
+	.vtg_bits = 2,
+	.mode_reg = MENELAUS_LDO_CTRL3,
+};
+
+static const struct menelaus_vtg_value vmem_values[] = {
+	{ 1500, 0 },
+	{ 1800, 1 },
+	{ 1900, 2 },
+	{ 2500, 3 },
+};
+
+int menelaus_set_vmem(unsigned int mV)
+{
+	int val;
+
+	if (mV == 0)
+		return menelaus_set_voltage(&vmem_vtg, 0, 0, 0);
+
+	val = menelaus_get_vtg_value(mV, vmem_values, ARRAY_SIZE(vmem_values));
+	if (val < 0)
+		return -EINVAL;
+	return menelaus_set_voltage(&vmem_vtg, mV, val, 0x02);
+}
+EXPORT_SYMBOL(menelaus_set_vmem);
+
+static const struct menelaus_vtg vio_vtg = {
+	.name = "VIO",
+	.vtg_reg = MENELAUS_LDO_CTRL1,
+	.vtg_shift = 2,
+	.vtg_bits = 2,
+	.mode_reg = MENELAUS_LDO_CTRL4,
+};
+
+static const struct menelaus_vtg_value vio_values[] = {
+	{ 1500, 0 },
+	{ 1800, 1 },
+	{ 2500, 2 },
+	{ 2800, 3 },
+};
+
+int menelaus_set_vio(unsigned int mV)
+{
+	int val;
+
+	if (mV == 0)
+		return menelaus_set_voltage(&vio_vtg, 0, 0, 0);
+
+	val = menelaus_get_vtg_value(mV, vio_values, ARRAY_SIZE(vio_values));
+	if (val < 0)
+		return -EINVAL;
+	return menelaus_set_voltage(&vio_vtg, mV, val, 0x02);
+}
+EXPORT_SYMBOL(menelaus_set_vio);
+
+static const struct menelaus_vtg_value vdcdc_values[] = {
+	{ 1500, 0 },
+	{ 1800, 1 },
+	{ 2000, 2 },
+	{ 2200, 3 },
+	{ 2400, 4 },
+	{ 2800, 5 },
+	{ 3000, 6 },
+	{ 3300, 7 },
+};
+
+static const struct menelaus_vtg vdcdc2_vtg = {
+	.name = "VDCDC2",
+	.vtg_reg = MENELAUS_DCDC_CTRL1,
+	.vtg_shift = 0,
+	.vtg_bits = 3,
+	.mode_reg = MENELAUS_DCDC_CTRL2,
+};
+
+static const struct menelaus_vtg vdcdc3_vtg = {
+	.name = "VDCDC3",
+	.vtg_reg = MENELAUS_DCDC_CTRL1,
+	.vtg_shift = 3,
+	.vtg_bits = 3,
+	.mode_reg = MENELAUS_DCDC_CTRL3,
+};
+
+int menelaus_set_vdcdc(int dcdc, unsigned int mV)
+{
+	const struct menelaus_vtg *vtg;
+	int val;
+
+	if (dcdc != 2 && dcdc != 3)
+		return -EINVAL;
+	if (dcdc == 2)
+		vtg = &vdcdc2_vtg;
+	else
+		vtg = &vdcdc3_vtg;
+
+	if (mV == 0)
+		return menelaus_set_voltage(vtg, 0, 0, 0);
+
+	val = menelaus_get_vtg_value(mV, vdcdc_values,
+				     ARRAY_SIZE(vdcdc_values));
+	if (val < 0)
+		return -EINVAL;
+	return menelaus_set_voltage(vtg, mV, val, 0x03);
+}
+
+static const struct menelaus_vtg_value vmmc_values[] = {
+	{ 1850, 0 },
+	{ 2800, 1 },
+	{ 3000, 2 },
+	{ 3100, 3 },
+};
+
+static const struct menelaus_vtg vmmc_vtg = {
+	.name = "VMMC",
+	.vtg_reg = MENELAUS_LDO_CTRL1,
+	.vtg_shift = 6,
+	.vtg_bits = 2,
+	.mode_reg = MENELAUS_LDO_CTRL7,
+};
+
+int menelaus_set_vmmc(unsigned int mV)
+{
+	int val;
+
+	if (mV == 0)
+		return menelaus_set_voltage(&vmmc_vtg, 0, 0, 0);
+
+	val = menelaus_get_vtg_value(mV, vmmc_values, ARRAY_SIZE(vmmc_values));
+	if (val < 0)
+		return -EINVAL;
+	return menelaus_set_voltage(&vmmc_vtg, mV, val, 0x02);
+}
+EXPORT_SYMBOL(menelaus_set_vmmc);
+
+
+static const struct menelaus_vtg_value vaux_values[] = {
+	{ 1500, 0 },
+	{ 1800, 1 },
+	{ 2500, 2 },
+	{ 2800, 3 },
+};
+
+static const struct menelaus_vtg vaux_vtg = {
+	.name = "VAUX",
+	.vtg_reg = MENELAUS_LDO_CTRL1,
+	.vtg_shift = 4,
+	.vtg_bits = 2,
+	.mode_reg = MENELAUS_LDO_CTRL6,
+};
+
+int menelaus_set_vaux(unsigned int mV)
+{
+	int val;
+
+	if (mV == 0)
+		return menelaus_set_voltage(&vaux_vtg, 0, 0, 0);
+
+	val = menelaus_get_vtg_value(mV, vaux_values, ARRAY_SIZE(vaux_values));
+	if (val < 0)
+		return -EINVAL;
+	return menelaus_set_voltage(&vaux_vtg, mV, val, 0x02);
+}
+EXPORT_SYMBOL(menelaus_set_vaux);
+
+int menelaus_get_slot_pin_states(void)
+{
+	return menelaus_read_reg(MENELAUS_MCT_PIN_ST);
+}
+EXPORT_SYMBOL(menelaus_get_slot_pin_states);
+
+int menelaus_set_regulator_sleep(int enable, u32 val)
+{
+	int t, ret;
+	struct i2c_client *c = the_menelaus->client;
+
+	mutex_lock(&the_menelaus->lock);
+	ret = menelaus_write_reg(MENELAUS_SLEEP_CTRL2, val);
+	if (ret < 0)
+		goto out;
+
+	dev_dbg(&c->dev, "regulator sleep configuration: %02x\n", val);
+
+	ret = menelaus_read_reg(MENELAUS_GPIO_CTRL);
+	if (ret < 0)
+		goto out;
+	t = ((1 << 6) | 0x04);
+	if (enable)
+		ret |= t;
+	else
+		ret &= ~t;
+	ret = menelaus_write_reg(MENELAUS_GPIO_CTRL, ret);
+out:
+	mutex_unlock(&the_menelaus->lock);
+	return ret;
+}
+
+/*-----------------------------------------------------------------------*/
+
+/* Handles Menelaus interrupts. Does not run in interrupt context */
+static void menelaus_work(struct work_struct *_menelaus)
+{
+	struct menelaus_chip *menelaus =
+			container_of(_menelaus, struct menelaus_chip, work);
+	void (*handler)(struct menelaus_chip *menelaus);
+
+	while (1) {
+		unsigned isr;
+
+		isr = (menelaus_read_reg(MENELAUS_INT_STATUS2)
+				& ~menelaus->mask2) << 8;
+		isr |= menelaus_read_reg(MENELAUS_INT_STATUS1)
+				& ~menelaus->mask1;
+		if (!isr)
+			break;
+
+		while (isr) {
+			int irq = fls(isr) - 1;
+			isr &= ~(1 << irq);
+
+			mutex_lock(&menelaus->lock);
+			menelaus_disable_irq(irq);
+			menelaus_ack_irq(irq);
+			handler = menelaus->handlers[irq];
+			if (handler)
+				handler(menelaus);
+			menelaus_enable_irq(irq);
+			mutex_unlock(&menelaus->lock);
+		}
+	}
+	enable_irq(menelaus->client->irq);
+}
+
+/*
+ * We cannot use I2C in interrupt context, so we just schedule work.
+ */
+static irqreturn_t menelaus_irq(int irq, void *_menelaus)
+{
+	struct menelaus_chip *menelaus = _menelaus;
+
+	disable_irq_nosync(irq);
+	(void)schedule_work(&menelaus->work);
+
+	return IRQ_HANDLED;
+}
+
+/*-----------------------------------------------------------------------*/
+
+/*
+ * The RTC needs to be set once, then it runs on backup battery power.
+ * It supports alarms, including system wake alarms (from some modes);
+ * and 1/second IRQs if requested.
+ */
+#ifdef CONFIG_RTC_DRV_TWL92330
+
+#define RTC_CTRL_RTC_EN		(1 << 0)
+#define RTC_CTRL_AL_EN		(1 << 1)
+#define RTC_CTRL_MODE12		(1 << 2)
+#define RTC_CTRL_EVERY_MASK	(3 << 3)
+#define RTC_CTRL_EVERY_SEC	(0 << 3)
+#define RTC_CTRL_EVERY_MIN	(1 << 3)
+#define RTC_CTRL_EVERY_HR	(2 << 3)
+#define RTC_CTRL_EVERY_DAY	(3 << 3)
+
+#define RTC_UPDATE_EVERY	0x08
+
+#define RTC_HR_PM		(1 << 7)
+
+static void menelaus_to_time(char *regs, struct rtc_time *t)
+{
+	t->tm_sec = BCD2BIN(regs[0]);
+	t->tm_min = BCD2BIN(regs[1]);
+	if (the_menelaus->rtc_control & RTC_CTRL_MODE12) {
+		t->tm_hour = BCD2BIN(regs[2] & 0x1f) - 1;
+		if (regs[2] & RTC_HR_PM)
+			t->tm_hour += 12;
+	} else
+		t->tm_hour = BCD2BIN(regs[2] & 0x3f);
+	t->tm_mday = BCD2BIN(regs[3]);
+	t->tm_mon = BCD2BIN(regs[4]) - 1;
+	t->tm_year = BCD2BIN(regs[5]) + 100;
+}
+
+static int time_to_menelaus(struct rtc_time *t, int regnum)
+{
+	int	hour, status;
+
+	status = menelaus_write_reg(regnum++, BIN2BCD(t->tm_sec));
+	if (status < 0)
+		goto fail;
+
+	status = menelaus_write_reg(regnum++, BIN2BCD(t->tm_min));
+	if (status < 0)
+		goto fail;
+
+	if (the_menelaus->rtc_control & RTC_CTRL_MODE12) {
+		hour = t->tm_hour + 1;
+		if (hour > 12)
+			hour = RTC_HR_PM | BIN2BCD(hour - 12);
+		else
+			hour = BIN2BCD(hour);
+	} else
+		hour = BIN2BCD(t->tm_hour);
+	status = menelaus_write_reg(regnum++, hour);
+	if (status < 0)
+		goto fail;
+
+	status = menelaus_write_reg(regnum++, BIN2BCD(t->tm_mday));
+	if (status < 0)
+		goto fail;
+
+	status = menelaus_write_reg(regnum++, BIN2BCD(t->tm_mon + 1));
+	if (status < 0)
+		goto fail;
+
+	status = menelaus_write_reg(regnum++, BIN2BCD(t->tm_year - 100));
+	if (status < 0)
+		goto fail;
+
+	return 0;
+fail:
+	dev_err(&the_menelaus->client->dev, "rtc write reg %02x, err %d\n",
+			--regnum, status);
+	return status;
+}
+
+static int menelaus_read_time(struct device *dev, struct rtc_time *t)
+{
+	struct i2c_msg	msg[2];
+	char		regs[7];
+	int		status;
+
+	/* block read date and time registers */
+	regs[0] = MENELAUS_RTC_SEC;
+
+	msg[0].addr = MENELAUS_I2C_ADDRESS;
+	msg[0].flags = 0;
+	msg[0].len = 1;
+	msg[0].buf = regs;
+
+	msg[1].addr = MENELAUS_I2C_ADDRESS;
+	msg[1].flags = I2C_M_RD;
+	msg[1].len = sizeof(regs);
+	msg[1].buf = regs;
+
+	status = i2c_transfer(the_menelaus->client->adapter, msg, 2);
+	if (status != 2) {
+		dev_err(dev, "%s error %d\n", "read", status);
+		return -EIO;
+	}
+
+	menelaus_to_time(regs, t);
+	t->tm_wday = BCD2BIN(regs[6]);
+
+	return 0;
+}
+
+static int menelaus_set_time(struct device *dev, struct rtc_time *t)
+{
+	int		status;
+
+	/* write date and time registers */
+	status = time_to_menelaus(t, MENELAUS_RTC_SEC);
+	if (status < 0)
+		return status;
+	status = menelaus_write_reg(MENELAUS_RTC_WKDAY, BIN2BCD(t->tm_wday));
+	if (status < 0) {
+		dev_err(&the_menelaus->client->dev, "rtc write reg %02x",
+				"err %d\n", MENELAUS_RTC_WKDAY, status);
+		return status;
+	}
+
+	/* now commit the write */
+	status = menelaus_write_reg(MENELAUS_RTC_UPDATE, RTC_UPDATE_EVERY);
+	if (status < 0)
+		dev_err(&the_menelaus->client->dev, "rtc commit time, err %d\n",
+				status);
+
+	return 0;
+}
+
+static int menelaus_read_alarm(struct device *dev, struct rtc_wkalrm *w)
+{
+	struct i2c_msg	msg[2];
+	char		regs[6];
+	int		status;
+
+	/* block read alarm registers */
+	regs[0] = MENELAUS_RTC_AL_SEC;
+
+	msg[0].addr = MENELAUS_I2C_ADDRESS;
+	msg[0].flags = 0;
+	msg[0].len = 1;
+	msg[0].buf = regs;
+
+	msg[1].addr = MENELAUS_I2C_ADDRESS;
+	msg[1].flags = I2C_M_RD;
+	msg[1].len = sizeof(regs);
+	msg[1].buf = regs;
+
+	status = i2c_transfer(the_menelaus->client->adapter, msg, 2);
+	if (status != 2) {
+		dev_err(dev, "%s error %d\n", "alarm read", status);
+		return -EIO;
+	}
+
+	menelaus_to_time(regs, &w->time);
+
+	w->enabled = !!(the_menelaus->rtc_control & RTC_CTRL_AL_EN);
+
+	/* NOTE we *could* check if actually pending... */
+	w->pending = 0;
+
+	return 0;
+}
+
+static int menelaus_set_alarm(struct device *dev, struct rtc_wkalrm *w)
+{
+	int		status;
+
+	if (the_menelaus->client->irq <= 0 && w->enabled)
+		return -ENODEV;
+
+	/* clear previous alarm enable */
+	if (the_menelaus->rtc_control & RTC_CTRL_AL_EN) {
+		the_menelaus->rtc_control &= ~RTC_CTRL_AL_EN;
+		status = menelaus_write_reg(MENELAUS_RTC_CTRL,
+				the_menelaus->rtc_control);
+		if (status < 0)
+			return status;
+	}
+
+	/* write alarm registers */
+	status = time_to_menelaus(&w->time, MENELAUS_RTC_AL_SEC);
+	if (status < 0)
+		return status;
+
+	/* enable alarm if requested */
+	if (w->enabled) {
+		the_menelaus->rtc_control |= RTC_CTRL_AL_EN;
+		status = menelaus_write_reg(MENELAUS_RTC_CTRL,
+				the_menelaus->rtc_control);
+	}
+
+	return status;
+}
+
+#ifdef CONFIG_RTC_INTF_DEV
+
+static void menelaus_rtc_update_work(struct menelaus_chip *m)
+{
+	/* report 1/sec update */
+	local_irq_disable();
+	rtc_update_irq(m->rtc, 1, RTC_IRQF | RTC_UF);
+	local_irq_enable();
+}
+
+static int menelaus_ioctl(struct device *dev, unsigned cmd, unsigned long arg)
+{
+	int	status;
+
+	if (the_menelaus->client->irq <= 0)
+		return -ENOIOCTLCMD;
+
+	switch (cmd) {
+	/* alarm IRQ */
+	case RTC_AIE_ON:
+		if (the_menelaus->rtc_control & RTC_CTRL_AL_EN)
+			return 0;
+		the_menelaus->rtc_control |= RTC_CTRL_AL_EN;
+		break;
+	case RTC_AIE_OFF:
+		if (!(the_menelaus->rtc_control & RTC_CTRL_AL_EN))
+			return 0;
+		the_menelaus->rtc_control &= ~RTC_CTRL_AL_EN;
+		break;
+	/* 1/second "update" IRQ */
+	case RTC_UIE_ON:
+		if (the_menelaus->uie)
+			return 0;
+		status = menelaus_remove_irq_work(MENELAUS_RTCTMR_IRQ);
+		status = menelaus_add_irq_work(MENELAUS_RTCTMR_IRQ,
+				menelaus_rtc_update_work);
+		if (status == 0)
+			the_menelaus->uie = 1;
+		return status;
+	case RTC_UIE_OFF:
+		if (!the_menelaus->uie)
+			return 0;
+		status = menelaus_remove_irq_work(MENELAUS_RTCTMR_IRQ);
+		if (status == 0)
+			the_menelaus->uie = 0;
+		return status;
+	default:
+		return -ENOIOCTLCMD;
+	}
+	return menelaus_write_reg(MENELAUS_RTC_CTRL, the_menelaus->rtc_control);
+}
+
+#else
+#define menelaus_ioctl	NULL
+#endif
+
+/* REVISIT no compensation register support ... */
+
+static const struct rtc_class_ops menelaus_rtc_ops = {
+	.ioctl			= menelaus_ioctl,
+	.read_time		= menelaus_read_time,
+	.set_time		= menelaus_set_time,
+	.read_alarm		= menelaus_read_alarm,
+	.set_alarm		= menelaus_set_alarm,
+};
+
+static void menelaus_rtc_alarm_work(struct menelaus_chip *m)
+{
+	/* report alarm */
+	local_irq_disable();
+	rtc_update_irq(m->rtc, 1, RTC_IRQF | RTC_AF);
+	local_irq_enable();
+
+	/* then disable it; alarms are oneshot */
+	the_menelaus->rtc_control &= ~RTC_CTRL_AL_EN;
+	menelaus_write_reg(MENELAUS_RTC_CTRL, the_menelaus->rtc_control);
+}
+
+static inline void menelaus_rtc_init(struct menelaus_chip *m)
+{
+	int	alarm = (m->client->irq > 0);
+
+	/* assume 32KDETEN pin is pulled high */
+	if (!(menelaus_read_reg(MENELAUS_OSC_CTRL) & 0x80)) {
+		dev_dbg(&m->client->dev, "no 32k oscillator\n");
+		return;
+	}
+
+	/* support RTC alarm; it can issue wakeups */
+	if (alarm) {
+		if (menelaus_add_irq_work(MENELAUS_RTCALM_IRQ,
+				menelaus_rtc_alarm_work) < 0) {
+			dev_err(&m->client->dev, "can't handle RTC alarm\n");
+			return;
+		}
+		device_init_wakeup(&m->client->dev, 1);
+	}
+
+	/* be sure RTC is enabled; allow 1/sec irqs; leave 12hr mode alone */
+	m->rtc_control = menelaus_read_reg(MENELAUS_RTC_CTRL);
+	if (!(m->rtc_control & RTC_CTRL_RTC_EN)
+			|| (m->rtc_control & RTC_CTRL_AL_EN)
+			|| (m->rtc_control & RTC_CTRL_EVERY_MASK)) {
+		if (!(m->rtc_control & RTC_CTRL_RTC_EN)) {
+			dev_warn(&m->client->dev, "rtc clock needs setting\n");
+			m->rtc_control |= RTC_CTRL_RTC_EN;
+		}
+		m->rtc_control &= ~RTC_CTRL_EVERY_MASK;
+		m->rtc_control &= ~RTC_CTRL_AL_EN;
+		menelaus_write_reg(MENELAUS_RTC_CTRL, m->rtc_control);
+	}
+
+	m->rtc = rtc_device_register(DRIVER_NAME,
+			&m->client->dev,
+			&menelaus_rtc_ops, THIS_MODULE);
+	if (IS_ERR(m->rtc)) {
+		if (alarm) {
+			menelaus_remove_irq_work(MENELAUS_RTCALM_IRQ);
+			device_init_wakeup(&m->client->dev, 0);
+		}
+		dev_err(&m->client->dev, "can't register RTC: %d\n",
+				(int) PTR_ERR(m->rtc));
+		the_menelaus->rtc = NULL;
+	}
+}
+
+#else
+
+static inline void menelaus_rtc_init(struct menelaus_chip *m)
+{
+	/* nothing */
+}
+
+#endif
+
+/*-----------------------------------------------------------------------*/
+
+static struct i2c_driver menelaus_i2c_driver;
+
+static int menelaus_probe(struct i2c_client *client)
+{
+	struct menelaus_chip	*menelaus;
+	int			rev = 0, val;
+	int			err = 0;
+	struct menelaus_platform_data *menelaus_pdata =
+					client->dev.platform_data;
+
+	if (the_menelaus) {
+		dev_dbg(&client->dev, "only one %s for now\n",
+				DRIVER_NAME);
+		return -ENODEV;
+	}
+
+	menelaus = kzalloc(sizeof *menelaus, GFP_KERNEL);
+	if (!menelaus)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, menelaus);
+
+	the_menelaus = menelaus;
+	menelaus->client = client;
+
+	/* If a true probe check the device */
+	rev = menelaus_read_reg(MENELAUS_REV);
+	if (rev < 0) {
+		pr_err("device not found");
+		err = -ENODEV;
+		goto fail1;
+	}
+
+	/* Ack and disable all Menelaus interrupts */
+	menelaus_write_reg(MENELAUS_INT_ACK1, 0xff);
+	menelaus_write_reg(MENELAUS_INT_ACK2, 0xff);
+	menelaus_write_reg(MENELAUS_INT_MASK1, 0xff);
+	menelaus_write_reg(MENELAUS_INT_MASK2, 0xff);
+	menelaus->mask1 = 0xff;
+	menelaus->mask2 = 0xff;
+
+	/* Set output buffer strengths */
+	menelaus_write_reg(MENELAUS_MCT_CTRL1, 0x73);
+
+	if (client->irq > 0) {
+		err = request_irq(client->irq, menelaus_irq, IRQF_DISABLED,
+				  DRIVER_NAME, menelaus);
+		if (err) {
+			dev_dbg(&client->dev,  "can't get IRQ %d, err %d",
+					client->irq, err);
+			goto fail1;
+		}
+	}
+
+	mutex_init(&menelaus->lock);
+	INIT_WORK(&menelaus->work, menelaus_work);
+
+	pr_info("Menelaus rev %d.%d\n", rev >> 4, rev & 0x0f);
+
+	val = menelaus_read_reg(MENELAUS_VCORE_CTRL1);
+	if (val < 0)
+		goto fail2;
+	if (val & (1 << 7))
+		menelaus->vcore_hw_mode = 1;
+	else
+		menelaus->vcore_hw_mode = 0;
+
+	if (menelaus_pdata != NULL && menelaus_pdata->late_init != NULL) {
+		err = menelaus_pdata->late_init(&client->dev);
+		if (err < 0)
+			goto fail2;
+	}
+
+	menelaus_rtc_init(menelaus);
+
+	return 0;
+fail2:
+	free_irq(client->irq, menelaus);
+	flush_scheduled_work();
+fail1:
+	kfree(menelaus);
+	return err;
+}
+
+static int __exit menelaus_remove(struct i2c_client *client)
+{
+	struct menelaus_chip	*menelaus = i2c_get_clientdata(client);
+
+	free_irq(client->irq, menelaus);
+	kfree(menelaus);
+	i2c_set_clientdata(client, NULL);
+	the_menelaus = NULL;
+	return 0;
+}
+
+static struct i2c_driver menelaus_i2c_driver = {
+	.driver = {
+		.name		= DRIVER_NAME,
+	},
+	.probe		= menelaus_probe,
+	.remove		= __exit_p(menelaus_remove),
+};
+
+static int __init menelaus_init(void)
+{
+	int res;
+
+	res = i2c_add_driver(&menelaus_i2c_driver);
+	if (res < 0) {
+		pr_err("driver registration failed\n");
+		return res;
+	}
+
+	return 0;
+}
+
+static void __exit menelaus_exit(void)
+{
+	i2c_del_driver(&menelaus_i2c_driver);
+
+	/* FIXME: Shutdown menelaus parts that can be shut down */
+}
+
+MODULE_AUTHOR("Texas Instruments, Inc. (and others)");
+MODULE_DESCRIPTION("I2C interface for Menelaus.");
+MODULE_LICENSE("GPL");
+
+module_init(menelaus_init);
+module_exit(menelaus_exit);