Staging: w35und: kill WBDEBUG and remove common.h header file

The only remaining thing in common.h header file is the WBDEBUG() macro which
is unconditionally defined as printk(). Kill the macro and remove the header
file.

Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

diff --git a/drivers/staging/winbond/common.h b/drivers/staging/winbond/common.h
deleted file mode 100644
index 4409edd..0000000
--- a/drivers/staging/winbond/common.h
+++ /dev/null
@@ -1,23 +0,0 @@
-//
-// common.h
-//
-// This file contains the OS dependant definition and function.
-// Every OS has this file individual.
-//
-#ifndef COMMON_DEF
-#define COMMON_DEF
-
-//#define DEBUG_ENABLED  1
-
-//==================================================================================================
-// Common function definition
-//==================================================================================================
-#define DEBUG_ENABLED
-#ifdef DEBUG_ENABLED
-#define WBDEBUG( _M )	printk _M
-#else
-#define WBDEBUG( _M )	0
-#endif
-
-#endif // COMMON_DEF
-
diff --git a/drivers/staging/winbond/mds.c b/drivers/staging/winbond/mds.c
index a9d1945..9a14836 100644
--- a/drivers/staging/winbond/mds.c
+++ b/drivers/staging/winbond/mds.c
@@ -374,7 +374,7 @@
 
 	pDes->TxRate = ctmp1;
 	#ifdef _PE_TX_DUMP_
-	WBDEBUG(("Tx rate =%x\n", ctmp1));
+	printk("Tx rate =%x\n", ctmp1);
 	#endif
 
 	pT01->T01_modulation_type = (ctmp1%3) ? 0 : 1;
@@ -442,7 +442,7 @@
 		FillIndex = pMds->TxFillIndex;
 		if (pMds->TxOwner[FillIndex]) { // Is owned by software 0:Yes 1:No
 #ifdef _PE_TX_DUMP_
-			WBDEBUG(("[Mds_Tx] Tx Owner is H/W.\n"));
+			printk("[Mds_Tx] Tx Owner is H/W.\n");
 #endif
 			break;
 		}
@@ -488,7 +488,7 @@
 			// For speed up Key setting
 			if (pTxDes->EapFix) {
 #ifdef _PE_TX_DUMP_
-				WBDEBUG(("35: EPA 4th frame detected. Size = %d\n", PacketSize));
+				printk("35: EPA 4th frame detected. Size = %d\n", PacketSize);
 #endif
 				pHwData->IsKeyPreSet = 1;
 			}
@@ -585,7 +585,7 @@
 				else
 					pHwData->tx_retry_count[7] += RetryCount;
 				#ifdef _PE_STATE_DUMP_
-				WBDEBUG(("dto_tx_retry_count =%d\n", pHwData->dto_tx_retry_count));
+				printk("dto_tx_retry_count =%d\n", pHwData->dto_tx_retry_count);
 				#endif
 				MTO_SetTxCount(adapter, TxRate, RetryCount);
 			}
diff --git a/drivers/staging/winbond/mto.c b/drivers/staging/winbond/mto.c
index 7718423..8c4107b 100644
--- a/drivers/staging/winbond/mto.c
+++ b/drivers/staging/winbond/mto.c
@@ -83,7 +83,6 @@
 void MTO_Init(MTO_FUNC_INPUT)
 {
     int i;
-	//WBDEBUG(("[MTO] -> MTO_Init()\n"));
 	//[WKCHEN]pMTOcore_data = pcore_data;
 // 20040510 Turbo add for global variable
     MTO_TMR_CNT()       = 0;
diff --git a/drivers/staging/winbond/reg.c b/drivers/staging/winbond/reg.c
index ed08e00..75738c8 100644
--- a/drivers/staging/winbond/reg.c
+++ b/drivers/staging/winbond/reg.c
@@ -1114,7 +1114,7 @@
 		//Start to fill RF parameters, PLL_ON should be pulled low.
 		Wb35Reg_WriteSync( pHwData, 0x03dc, 0x00000000 );
 #ifdef _PE_STATE_DUMP_
-		WBDEBUG(("* PLL_ON    low\n"));
+		printk("* PLL_ON    low\n");
 #endif
 
 		number = sizeof(al7230_rf_data_24)/sizeof(al7230_rf_data_24[0]);
@@ -1223,7 +1223,7 @@
 			//pulled high
 			Wb35Reg_WriteSync( pHwData, 0x03dc, 0x00000080 );
 			#ifdef _PE_STATE_DUMP_
-			WBDEBUG(("* PLL_ON    high\n"));
+			printk("* PLL_ON    high\n");
 			#endif
 
 			//2.4GHz
@@ -1243,7 +1243,7 @@
 			//5GHz
 			Wb35Reg_WriteSync( pHwData, 0x03dc, 0x00000000 );
 			#ifdef _PE_STATE_DUMP_
-			WBDEBUG(("* PLL_ON    low\n"));
+			printk("* PLL_ON    low\n");
 			#endif
 
 			number = sizeof(al7230_rf_data_50)/sizeof(al7230_rf_data_50[0]);
@@ -1255,7 +1255,7 @@
 
 			Wb35Reg_WriteSync( pHwData, 0x03dc, 0x00000080 );
 			#ifdef _PE_STATE_DUMP_
-			WBDEBUG(("* PLL_ON    high\n"));
+			printk("* PLL_ON    high\n");
 			#endif
 
 			//ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x12BACF;
@@ -1271,7 +1271,7 @@
 			msleep(5);
 
 			//Wb35Reg_WriteSync( pHwData, 0x03dc, 0x00000080 );
-			//WBDEBUG(("* PLL_ON    high\n"));
+			//printk("* PLL_ON    high\n");
 			break;
 
 		case RF_WB_242:
@@ -2011,7 +2011,7 @@
 
 			//Start to fill RF parameters, PLL_ON should be pulled low.
 			//Wb35Reg_Write( pHwData, 0x03dc, 0x00000000 );
-			//WBDEBUG(("* PLL_ON    low\n"));
+			//printk("* PLL_ON    low\n");
 
 			//Channel independent registers
 			if( Channel.band != pHwData->band)
@@ -2036,7 +2036,7 @@
 				// Write to register. number must less and equal than 16
 				Wb35Reg_BurstWrite( pHwData, 0x0864, pltmp, number, NO_INCREMENT );
 				#ifdef _PE_STATE_DUMP_
-				WBDEBUG(("Band changed\n"));
+				printk("Band changed\n");
 				#endif
 			}
 
@@ -2611,9 +2611,9 @@
 	}
 
 	#ifdef _PE_STATE_DUMP_
-	WBDEBUG((" TxVgaFor24 : \n"));
+	printk(" TxVgaFor24 : \n");
 	DataDmp((u8 *)pHwData->TxVgaFor24, 14 ,0);
-	WBDEBUG((" TxVgaFor50 : \n"));
+	printk(" TxVgaFor50 : \n");
 	DataDmp((u8 *)pHwData->TxVgaFor50, 70 ,0);
 	#endif
 }
diff --git a/drivers/staging/winbond/wb35reg.c b/drivers/staging/winbond/wb35reg.c
index e9d1b73..59ae5ef 100644
--- a/drivers/staging/winbond/wb35reg.c
+++ b/drivers/staging/winbond/wb35reg.c
@@ -149,7 +149,7 @@
 
 	if (ret < 0) {
 		#ifdef _PE_REG_DUMP_
-		WBDEBUG(("EP0 Write register usb message sending error\n"));
+		printk("EP0 Write register usb message sending error\n");
 		#endif
 
 		pHwData->SurpriseRemove = 1; // 20060704.2
@@ -316,7 +316,7 @@
 
 	if (ret < 0) {
 		#ifdef _PE_REG_DUMP_
-		WBDEBUG(("EP0 Read register usb message sending error\n"));
+		printk("EP0 Read register usb message sending error\n");
 		#endif
 
 		pHwData->SurpriseRemove = 1; // 20060704.2
@@ -441,7 +441,7 @@
 
 	if (ret < 0) {
 #ifdef _PE_REG_DUMP_
-		WBDEBUG(("EP0 Irp sending error\n"));
+		printk("EP0 Irp sending error\n");
 #endif
 		goto cleanup;
 	}
@@ -480,7 +480,7 @@
 
 		if (reg->EP0VM_status) {
 #ifdef _PE_REG_DUMP_
-			WBDEBUG(("EP0 IoCompleteRoutine return error\n"));
+			printk("EP0 IoCompleteRoutine return error\n");
 #endif
 			reg->EP0vm_state = VM_STOP;
 			pHwData->SurpriseRemove = 1;
@@ -529,7 +529,7 @@
 			kfree(reg_queue);
 		} else {
 			#ifdef _PE_REG_DUMP_
-			WBDEBUG(("EP0 queue release error\n"));
+			printk("EP0 queue release error\n");
 			#endif
 		}
 		spin_lock_irq( &reg->EP0VM_spin_lock );
diff --git a/drivers/staging/winbond/wb35rx.c b/drivers/staging/winbond/wb35rx.c
index 63d5591..029d918 100644
--- a/drivers/staging/winbond/wb35rx.c
+++ b/drivers/staging/winbond/wb35rx.c
@@ -118,7 +118,7 @@
 			// Basic check for Rx length. Is length valid?
 			if (PacketSize > MAX_PACKET_SIZE) {
 				#ifdef _PE_RX_DUMP_
-				WBDEBUG(("Serious ERROR : Rx data size too long, size =%d\n", PacketSize));
+				printk("Serious ERROR : Rx data size too long, size =%d\n", PacketSize);
 				#endif
 
 				pWb35Rx->EP3vm_state = VM_STOP;
@@ -194,7 +194,7 @@
 	// The URB is completed, check the result
 	if (pWb35Rx->EP3VM_status != 0) {
 		#ifdef _PE_USB_STATE_DUMP_
-		WBDEBUG(("EP3 IoCompleteRoutine return error\n"));
+		printk("EP3 IoCompleteRoutine return error\n");
 		#endif
 		pWb35Rx->EP3vm_state = VM_STOP;
 		goto error;
@@ -259,7 +259,7 @@
 	if (!pWb35Rx->RxOwner[RxBufferId]) {
 		// It's impossible to run here.
 		#ifdef _PE_RX_DUMP_
-		WBDEBUG(("Rx driver fifo unavailable\n"));
+		printk("Rx driver fifo unavailable\n");
 		#endif
 		goto error;
 	}
@@ -348,7 +348,7 @@
 	if (pWb35Rx->EP3vm_state == VM_RUNNING) {
 		usb_unlink_urb( pWb35Rx->RxUrb ); // Only use unlink, let Wb35Rx_destroy to free them
 		#ifdef _PE_RX_DUMP_
-		WBDEBUG(("EP3 Rx stop\n"));
+		printk("EP3 Rx stop\n");
 		#endif
 	}
 }
@@ -366,7 +366,7 @@
 	if (pWb35Rx->RxUrb)
 		usb_free_urb( pWb35Rx->RxUrb );
 	#ifdef _PE_RX_DUMP_
-	WBDEBUG(("Wb35Rx_destroy OK\n"));
+	printk("Wb35Rx_destroy OK\n");
 	#endif
 }
 
diff --git a/drivers/staging/winbond/wb35tx.c b/drivers/staging/winbond/wb35tx.c
index b9b4456..f7fe8d6 100644
--- a/drivers/staging/winbond/wb35tx.c
+++ b/drivers/staging/winbond/wb35tx.c
@@ -153,14 +153,14 @@
 	if (pWb35Tx->EP2vm_state == VM_RUNNING)
 		usb_unlink_urb( pWb35Tx->Tx2Urb ); // Only use unlink, let Wb35Tx_destrot to free them
 	#ifdef _PE_TX_DUMP_
-	WBDEBUG(("EP2 Tx stop\n"));
+	printk("EP2 Tx stop\n");
 	#endif
 
 	// Trying to canceling the Irp of EP4
 	if (pWb35Tx->EP4vm_state == VM_RUNNING)
 		usb_unlink_urb( pWb35Tx->Tx4Urb ); // Only use unlink, let Wb35Tx_destrot to free them
 	#ifdef _PE_TX_DUMP_
-	WBDEBUG(("EP4 Tx stop\n"));
+	printk("EP4 Tx stop\n");
 	#endif
 }
 
@@ -182,7 +182,7 @@
 		usb_free_urb( pWb35Tx->Tx2Urb );
 
 	#ifdef _PE_TX_DUMP_
-	WBDEBUG(("Wb35Tx_destroy OK\n"));
+	printk("Wb35Tx_destroy OK\n");
 	#endif
 }
 
@@ -229,7 +229,7 @@
 
 	//The Urb is completed, check the result
 	if (pWb35Tx->EP2VM_status != 0) {
-		WBDEBUG(("EP2 IoCompleteRoutine return error\n"));
+		printk("EP2 IoCompleteRoutine return error\n");
 		pWb35Tx->EP2vm_state= VM_STOP;
 		goto error;
 	}
@@ -279,7 +279,7 @@
 
 	if (retv < 0) {
 		#ifdef _PE_TX_DUMP_
-		WBDEBUG(("EP2 Tx Irp sending error\n"));
+		printk("EP2 Tx Irp sending error\n");
 		#endif
 		goto error;
 	}
diff --git a/drivers/staging/winbond/wbhal.c b/drivers/staging/winbond/wbhal.c
index a2cc077..c8313db 100644
--- a/drivers/staging/winbond/wbhal.c
+++ b/drivers/staging/winbond/wbhal.c
@@ -396,7 +396,7 @@
 	pHwData->Channel = channel.ChanNo;
 	pHwData->band = channel.band;
 	#ifdef _PE_STATE_DUMP_
-	WBDEBUG(("Set channel is %d, band =%d\n", pHwData->Channel, pHwData->band));
+	printk("Set channel is %d, band =%d\n", pHwData->Channel, pHwData->band);
 	#endif
 	reg->M28_MacControl &= ~0xff; // Clean channel information field
 	reg->M28_MacControl |= channel.ChanNo;
diff --git a/drivers/staging/winbond/wbhal_s.h b/drivers/staging/winbond/wbhal_s.h
index 9353ac2..64d8e61 100644
--- a/drivers/staging/winbond/wbhal_s.h
+++ b/drivers/staging/winbond/wbhal_s.h
@@ -4,8 +4,6 @@
 #include <linux/types.h>
 #include <linux/if_ether.h> /* for ETH_ALEN */
 
-#include "common.h"
-
 //[20040722 WK]
 #define HAL_LED_SET_MASK		0x001c	//20060901 Extend
 #define HAL_LED_SET_SHIFT		2
diff --git a/drivers/staging/winbond/wbusb.c b/drivers/staging/winbond/wbusb.c
index 3b6ecd11..853ec39 100644
--- a/drivers/staging/winbond/wbusb.c
+++ b/drivers/staging/winbond/wbusb.c
@@ -277,7 +277,7 @@
 	//get current antenna
 	priv->sLocalPara.bAntennaNo = hal_get_antenna_number(pHwData);
 #ifdef _PE_STATE_DUMP_
-	WBDEBUG(("Driver init, antenna no = %d\n", psLOCAL->bAntennaNo));
+	printk("Driver init, antenna no = %d\n", psLOCAL->bAntennaNo);
 #endif
 	hal_get_hw_radio_off( pHwData );
 
@@ -404,7 +404,7 @@
 	// Turn off Rx and Tx hardware ability
 	hal_stop( &adapter->sHwData );
 #ifdef _PE_USB_INI_DUMP_
-	WBDEBUG(("[w35und] Hal_stop O.K.\n"));
+	printk("[w35und] Hal_stop O.K.\n");
 #endif
 	msleep(100);// Waiting Irp completed