ARM: dts: msm: Add wcnss node for sdm450
Add wcnss base memory address and voltage regulator
entry required for wlan.
Change-Id: Ib7b7f033e06f6f8aa8ec9eb83e87ad09599baa49
Signed-off-by: Anurag Chouhan <achouhan@codeaurora.org>
diff --git a/arch/arm64/boot/dts/qcom/msm8953.dtsi b/arch/arm64/boot/dts/qcom/msm8953.dtsi
index a142840..164a64c 100644
--- a/arch/arm64/boot/dts/qcom/msm8953.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8953.dtsi
@@ -1757,6 +1757,89 @@
qcom,firmware-name = "venus";
memory-region = <&venus_mem>;
};
+
+ qcom,wcnss-wlan@0a000000 {
+ compatible = "qcom,wcnss_wlan";
+ reg = <0x0a000000 0x280000>,
+ <0x0b011008 0x04>,
+ <0x0a21b000 0x3000>,
+ <0x03204000 0x00000100>,
+ <0x03200800 0x00000200>,
+ <0x0a100400 0x00000200>,
+ <0x0a205050 0x00000200>,
+ <0x0a219000 0x00000020>,
+ <0x0a080488 0x00000008>,
+ <0x0a080fb0 0x00000008>,
+ <0x0a08040c 0x00000008>,
+ <0x0a0120a8 0x00000008>,
+ <0x0a012448 0x00000008>,
+ <0x0a080c00 0x00000001>;
+
+ reg-names = "wcnss_mmio", "wcnss_fiq",
+ "pronto_phy_base", "riva_phy_base",
+ "riva_ccu_base", "pronto_a2xb_base",
+ "pronto_ccpu_base", "pronto_saw2_base",
+ "wlan_tx_phy_aborts","wlan_brdg_err_source",
+ "wlan_tx_status", "alarms_txctl",
+ "alarms_tactl", "pronto_mcu_base";
+
+ interrupts = <0 145 0 0 146 0>;
+ interrupt-names = "wcnss_wlantx_irq", "wcnss_wlanrx_irq";
+
+ qcom,pronto-vddmx-supply = <&pm8953_s7_level_ao>;
+ qcom,pronto-vddcx-supply = <&pm8953_s2_level>;
+ qcom,pronto-vddpx-supply = <&pm8953_l5>;
+ qcom,iris-vddxo-supply = <&pm8953_l7>;
+ qcom,iris-vddrfa-supply = <&pm8953_l19>;
+ qcom,iris-vddpa-supply = <&pm8953_l9>;
+ qcom,iris-vdddig-supply = <&pm8953_l5>;
+
+ qcom,iris-vddxo-voltage-level = <1800000 0 1800000>;
+ qcom,iris-vddrfa-voltage-level = <1300000 0 1300000>;
+ qcom,iris-vddpa-voltage-level = <3300000 0 3300000>;
+ qcom,iris-vdddig-voltage-level = <1800000 0 1800000>;
+
+ qcom,vddmx-voltage-level = <RPM_SMD_REGULATOR_LEVEL_TURBO
+ RPM_SMD_REGULATOR_LEVEL_NONE
+ RPM_SMD_REGULATOR_LEVEL_TURBO>;
+ qcom,vddcx-voltage-level = <RPM_SMD_REGULATOR_LEVEL_NOM
+ RPM_SMD_REGULATOR_LEVEL_NONE
+ RPM_SMD_REGULATOR_LEVEL_TURBO>;
+ qcom,vddpx-voltage-level = <1800000 0 1800000>;
+
+ qcom,iris-vddxo-current = <10000>;
+ qcom,iris-vddrfa-current = <100000>;
+ qcom,iris-vddpa-current = <515000>;
+ qcom,iris-vdddig-current = <10000>;
+
+ qcom,pronto-vddmx-current = <0>;
+ qcom,pronto-vddcx-current = <0>;
+ qcom,pronto-vddpx-current = <0>;
+
+ pinctrl-names = "wcnss_default", "wcnss_sleep",
+ "wcnss_gpio_default";
+ pinctrl-0 = <&wcnss_default>;
+ pinctrl-1 = <&wcnss_sleep>;
+ pinctrl-2 = <&wcnss_gpio_default>;
+
+ gpios = <&tlmm 76 0>, <&tlmm 77 0>, <&tlmm 78 0>,
+ <&tlmm 79 0>, <&tlmm 80 0>;
+
+ clocks = <&clock_gcc clk_xo_wlan_clk>,
+ <&clock_gcc clk_rf_clk2>,
+ <&clock_debug clk_gcc_debug_mux>,
+ <&clock_gcc clk_wcnss_m_clk>;
+
+ clock-names = "xo", "rf_clk", "measure", "wcnss_debug";
+
+ qcom,has-autodetect-xo;
+ qcom,is-pronto-v3;
+ qcom,has-pronto-hw;
+ qcom,has-vsys-adc-channel;
+ qcom,has-a2xb-split-reg;
+ qcom,wcnss-adc_tm = <&pm8953_adc_tm>;
+ };
+
};
#include "pm8953-rpm-regulator.dtsi"