drm/radeon: rework panel mode setup
Adjust the panel mode setup to match the behavior
of the vbios. Rather than checking for specific
bridge chip ids, just check the eDP configuration register.
This saves extra aux transactions and works across
DP bridge chips without requiring additional per chip
id checking.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
diff --git a/drivers/gpu/drm/radeon/atombios_dp.c b/drivers/gpu/drm/radeon/atombios_dp.c
index 7712cf5..3623b98 100644
--- a/drivers/gpu/drm/radeon/atombios_dp.c
+++ b/drivers/gpu/drm/radeon/atombios_dp.c
@@ -577,30 +577,25 @@
struct radeon_device *rdev = dev->dev_private;
struct radeon_connector *radeon_connector = to_radeon_connector(connector);
int panel_mode = DP_PANEL_MODE_EXTERNAL_DP_MODE;
+ u16 dp_bridge = radeon_connector_encoder_get_dp_bridge_encoder_id(connector);
+ u8 tmp;
if (!ASIC_IS_DCE4(rdev))
return panel_mode;
- if (radeon_connector_encoder_get_dp_bridge_encoder_id(connector) ==
- ENCODER_OBJECT_ID_NUTMEG)
- panel_mode = DP_PANEL_MODE_INTERNAL_DP1_MODE;
- else if (radeon_connector_encoder_get_dp_bridge_encoder_id(connector) ==
- ENCODER_OBJECT_ID_TRAVIS) {
- u8 id[6];
- int i;
- for (i = 0; i < 6; i++)
- id[i] = radeon_read_dpcd_reg(radeon_connector, 0x503 + i);
- if (id[0] == 0x73 &&
- id[1] == 0x69 &&
- id[2] == 0x76 &&
- id[3] == 0x61 &&
- id[4] == 0x72 &&
- id[5] == 0x54)
+ if (dp_bridge != ENCODER_OBJECT_ID_NONE) {
+ /* DP bridge chips */
+ tmp = radeon_read_dpcd_reg(radeon_connector, DP_EDP_CONFIGURATION_CAP);
+ if (tmp & 1)
+ panel_mode = DP_PANEL_MODE_INTERNAL_DP2_MODE;
+ else if ((dp_bridge == ENCODER_OBJECT_ID_NUTMEG) ||
+ (dp_bridge == ENCODER_OBJECT_ID_TRAVIS))
panel_mode = DP_PANEL_MODE_INTERNAL_DP1_MODE;
else
- panel_mode = DP_PANEL_MODE_INTERNAL_DP2_MODE;
+ panel_mode = DP_PANEL_MODE_EXTERNAL_DP_MODE;
} else if (connector->connector_type == DRM_MODE_CONNECTOR_eDP) {
- u8 tmp = radeon_read_dpcd_reg(radeon_connector, DP_EDP_CONFIGURATION_CAP);
+ /* eDP */
+ tmp = radeon_read_dpcd_reg(radeon_connector, DP_EDP_CONFIGURATION_CAP);
if (tmp & 1)
panel_mode = DP_PANEL_MODE_INTERNAL_DP2_MODE;
}