| /* |
| * drivers/base/power/domain.c - Common code related to device power domains. |
| * |
| * Copyright (C) 2011 Rafael J. Wysocki <rjw@sisk.pl>, Renesas Electronics Corp. |
| * |
| * This file is released under the GPLv2. |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/kernel.h> |
| #include <linux/io.h> |
| #include <linux/platform_device.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/pm_domain.h> |
| #include <linux/pm_qos.h> |
| #include <linux/pm_clock.h> |
| #include <linux/slab.h> |
| #include <linux/err.h> |
| #include <linux/sched.h> |
| #include <linux/suspend.h> |
| #include <linux/export.h> |
| |
| #include "power.h" |
| |
| #define GENPD_RETRY_MAX_MS 250 /* Approximate */ |
| |
| #define GENPD_DEV_CALLBACK(genpd, type, callback, dev) \ |
| ({ \ |
| type (*__routine)(struct device *__d); \ |
| type __ret = (type)0; \ |
| \ |
| __routine = genpd->dev_ops.callback; \ |
| if (__routine) { \ |
| __ret = __routine(dev); \ |
| } \ |
| __ret; \ |
| }) |
| |
| static LIST_HEAD(gpd_list); |
| static DEFINE_MUTEX(gpd_list_lock); |
| |
| /* |
| * Get the generic PM domain for a particular struct device. |
| * This validates the struct device pointer, the PM domain pointer, |
| * and checks that the PM domain pointer is a real generic PM domain. |
| * Any failure results in NULL being returned. |
| */ |
| struct generic_pm_domain *pm_genpd_lookup_dev(struct device *dev) |
| { |
| struct generic_pm_domain *genpd = NULL, *gpd; |
| |
| if (IS_ERR_OR_NULL(dev) || IS_ERR_OR_NULL(dev->pm_domain)) |
| return NULL; |
| |
| mutex_lock(&gpd_list_lock); |
| list_for_each_entry(gpd, &gpd_list, gpd_list_node) { |
| if (&gpd->domain == dev->pm_domain) { |
| genpd = gpd; |
| break; |
| } |
| } |
| mutex_unlock(&gpd_list_lock); |
| |
| return genpd; |
| } |
| |
| /* |
| * This should only be used where we are certain that the pm_domain |
| * attached to the device is a genpd domain. |
| */ |
| static struct generic_pm_domain *dev_to_genpd(struct device *dev) |
| { |
| if (IS_ERR_OR_NULL(dev->pm_domain)) |
| return ERR_PTR(-EINVAL); |
| |
| return pd_to_genpd(dev->pm_domain); |
| } |
| |
| static int genpd_stop_dev(struct generic_pm_domain *genpd, struct device *dev) |
| { |
| return GENPD_DEV_CALLBACK(genpd, int, stop, dev); |
| } |
| |
| static int genpd_start_dev(struct generic_pm_domain *genpd, struct device *dev) |
| { |
| return GENPD_DEV_CALLBACK(genpd, int, start, dev); |
| } |
| |
| static bool genpd_sd_counter_dec(struct generic_pm_domain *genpd) |
| { |
| bool ret = false; |
| |
| if (!WARN_ON(atomic_read(&genpd->sd_count) == 0)) |
| ret = !!atomic_dec_and_test(&genpd->sd_count); |
| |
| return ret; |
| } |
| |
| static void genpd_sd_counter_inc(struct generic_pm_domain *genpd) |
| { |
| atomic_inc(&genpd->sd_count); |
| smp_mb__after_atomic(); |
| } |
| |
| static int genpd_power_on(struct generic_pm_domain *genpd, bool timed) |
| { |
| ktime_t time_start; |
| s64 elapsed_ns; |
| int ret; |
| |
| if (!genpd->power_on) |
| return 0; |
| |
| if (!timed) |
| return genpd->power_on(genpd); |
| |
| time_start = ktime_get(); |
| ret = genpd->power_on(genpd); |
| if (ret) |
| return ret; |
| |
| elapsed_ns = ktime_to_ns(ktime_sub(ktime_get(), time_start)); |
| if (elapsed_ns <= genpd->power_on_latency_ns) |
| return ret; |
| |
| genpd->power_on_latency_ns = elapsed_ns; |
| genpd->max_off_time_changed = true; |
| pr_debug("%s: Power-%s latency exceeded, new value %lld ns\n", |
| genpd->name, "on", elapsed_ns); |
| |
| return ret; |
| } |
| |
| static int genpd_power_off(struct generic_pm_domain *genpd, bool timed) |
| { |
| ktime_t time_start; |
| s64 elapsed_ns; |
| int ret; |
| |
| if (!genpd->power_off) |
| return 0; |
| |
| if (!timed) |
| return genpd->power_off(genpd); |
| |
| time_start = ktime_get(); |
| ret = genpd->power_off(genpd); |
| if (ret == -EBUSY) |
| return ret; |
| |
| elapsed_ns = ktime_to_ns(ktime_sub(ktime_get(), time_start)); |
| if (elapsed_ns <= genpd->power_off_latency_ns) |
| return ret; |
| |
| genpd->power_off_latency_ns = elapsed_ns; |
| genpd->max_off_time_changed = true; |
| pr_debug("%s: Power-%s latency exceeded, new value %lld ns\n", |
| genpd->name, "off", elapsed_ns); |
| |
| return ret; |
| } |
| |
| /** |
| * genpd_queue_power_off_work - Queue up the execution of genpd_poweroff(). |
| * @genpd: PM domait to power off. |
| * |
| * Queue up the execution of genpd_poweroff() unless it's already been done |
| * before. |
| */ |
| static void genpd_queue_power_off_work(struct generic_pm_domain *genpd) |
| { |
| queue_work(pm_wq, &genpd->power_off_work); |
| } |
| |
| static int genpd_poweron(struct generic_pm_domain *genpd); |
| |
| /** |
| * __genpd_poweron - Restore power to a given PM domain and its masters. |
| * @genpd: PM domain to power up. |
| * |
| * Restore power to @genpd and all of its masters so that it is possible to |
| * resume a device belonging to it. |
| */ |
| static int __genpd_poweron(struct generic_pm_domain *genpd) |
| { |
| struct gpd_link *link; |
| int ret = 0; |
| |
| if (genpd->status == GPD_STATE_ACTIVE |
| || (genpd->prepared_count > 0 && genpd->suspend_power_off)) |
| return 0; |
| |
| /* |
| * The list is guaranteed not to change while the loop below is being |
| * executed, unless one of the masters' .power_on() callbacks fiddles |
| * with it. |
| */ |
| list_for_each_entry(link, &genpd->slave_links, slave_node) { |
| genpd_sd_counter_inc(link->master); |
| |
| ret = genpd_poweron(link->master); |
| if (ret) { |
| genpd_sd_counter_dec(link->master); |
| goto err; |
| } |
| } |
| |
| ret = genpd_power_on(genpd, true); |
| if (ret) |
| goto err; |
| |
| genpd->status = GPD_STATE_ACTIVE; |
| return 0; |
| |
| err: |
| list_for_each_entry_continue_reverse(link, |
| &genpd->slave_links, |
| slave_node) { |
| genpd_sd_counter_dec(link->master); |
| genpd_queue_power_off_work(link->master); |
| } |
| |
| return ret; |
| } |
| |
| /** |
| * genpd_poweron - Restore power to a given PM domain and its masters. |
| * @genpd: PM domain to power up. |
| */ |
| static int genpd_poweron(struct generic_pm_domain *genpd) |
| { |
| int ret; |
| |
| mutex_lock(&genpd->lock); |
| ret = __genpd_poweron(genpd); |
| mutex_unlock(&genpd->lock); |
| return ret; |
| } |
| |
| static int genpd_save_dev(struct generic_pm_domain *genpd, struct device *dev) |
| { |
| return GENPD_DEV_CALLBACK(genpd, int, save_state, dev); |
| } |
| |
| static int genpd_restore_dev(struct generic_pm_domain *genpd, |
| struct device *dev) |
| { |
| return GENPD_DEV_CALLBACK(genpd, int, restore_state, dev); |
| } |
| |
| static int genpd_dev_pm_qos_notifier(struct notifier_block *nb, |
| unsigned long val, void *ptr) |
| { |
| struct generic_pm_domain_data *gpd_data; |
| struct device *dev; |
| |
| gpd_data = container_of(nb, struct generic_pm_domain_data, nb); |
| dev = gpd_data->base.dev; |
| |
| for (;;) { |
| struct generic_pm_domain *genpd; |
| struct pm_domain_data *pdd; |
| |
| spin_lock_irq(&dev->power.lock); |
| |
| pdd = dev->power.subsys_data ? |
| dev->power.subsys_data->domain_data : NULL; |
| if (pdd && pdd->dev) { |
| to_gpd_data(pdd)->td.constraint_changed = true; |
| genpd = dev_to_genpd(dev); |
| } else { |
| genpd = ERR_PTR(-ENODATA); |
| } |
| |
| spin_unlock_irq(&dev->power.lock); |
| |
| if (!IS_ERR(genpd)) { |
| mutex_lock(&genpd->lock); |
| genpd->max_off_time_changed = true; |
| mutex_unlock(&genpd->lock); |
| } |
| |
| dev = dev->parent; |
| if (!dev || dev->power.ignore_children) |
| break; |
| } |
| |
| return NOTIFY_DONE; |
| } |
| |
| /** |
| * genpd_poweroff - Remove power from a given PM domain. |
| * @genpd: PM domain to power down. |
| * @is_async: PM domain is powered down from a scheduled work |
| * |
| * If all of the @genpd's devices have been suspended and all of its subdomains |
| * have been powered down, remove power from @genpd. |
| */ |
| static int genpd_poweroff(struct generic_pm_domain *genpd, bool is_async) |
| { |
| struct pm_domain_data *pdd; |
| struct gpd_link *link; |
| unsigned int not_suspended = 0; |
| |
| /* |
| * Do not try to power off the domain in the following situations: |
| * (1) The domain is already in the "power off" state. |
| * (2) System suspend is in progress. |
| */ |
| if (genpd->status == GPD_STATE_POWER_OFF |
| || genpd->prepared_count > 0) |
| return 0; |
| |
| if (atomic_read(&genpd->sd_count) > 0) |
| return -EBUSY; |
| |
| list_for_each_entry(pdd, &genpd->dev_list, list_node) { |
| enum pm_qos_flags_status stat; |
| |
| stat = dev_pm_qos_flags(pdd->dev, |
| PM_QOS_FLAG_NO_POWER_OFF |
| | PM_QOS_FLAG_REMOTE_WAKEUP); |
| if (stat > PM_QOS_FLAGS_NONE) |
| return -EBUSY; |
| |
| if (!pm_runtime_suspended(pdd->dev) || pdd->dev->power.irq_safe) |
| not_suspended++; |
| } |
| |
| if (not_suspended > 1 || (not_suspended == 1 && is_async)) |
| return -EBUSY; |
| |
| if (genpd->gov && genpd->gov->power_down_ok) { |
| if (!genpd->gov->power_down_ok(&genpd->domain)) |
| return -EAGAIN; |
| } |
| |
| if (genpd->power_off) { |
| int ret; |
| |
| if (atomic_read(&genpd->sd_count) > 0) |
| return -EBUSY; |
| |
| /* |
| * If sd_count > 0 at this point, one of the subdomains hasn't |
| * managed to call genpd_poweron() for the master yet after |
| * incrementing it. In that case genpd_poweron() will wait |
| * for us to drop the lock, so we can call .power_off() and let |
| * the genpd_poweron() restore power for us (this shouldn't |
| * happen very often). |
| */ |
| ret = genpd_power_off(genpd, true); |
| if (ret) |
| return ret; |
| } |
| |
| genpd->status = GPD_STATE_POWER_OFF; |
| |
| list_for_each_entry(link, &genpd->slave_links, slave_node) { |
| genpd_sd_counter_dec(link->master); |
| genpd_queue_power_off_work(link->master); |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * genpd_power_off_work_fn - Power off PM domain whose subdomain count is 0. |
| * @work: Work structure used for scheduling the execution of this function. |
| */ |
| static void genpd_power_off_work_fn(struct work_struct *work) |
| { |
| struct generic_pm_domain *genpd; |
| |
| genpd = container_of(work, struct generic_pm_domain, power_off_work); |
| |
| mutex_lock(&genpd->lock); |
| genpd_poweroff(genpd, true); |
| mutex_unlock(&genpd->lock); |
| } |
| |
| /** |
| * pm_genpd_runtime_suspend - Suspend a device belonging to I/O PM domain. |
| * @dev: Device to suspend. |
| * |
| * Carry out a runtime suspend of a device under the assumption that its |
| * pm_domain field points to the domain member of an object of type |
| * struct generic_pm_domain representing a PM domain consisting of I/O devices. |
| */ |
| static int pm_genpd_runtime_suspend(struct device *dev) |
| { |
| struct generic_pm_domain *genpd; |
| bool (*stop_ok)(struct device *__dev); |
| struct gpd_timing_data *td = &dev_gpd_data(dev)->td; |
| bool runtime_pm = pm_runtime_enabled(dev); |
| ktime_t time_start; |
| s64 elapsed_ns; |
| int ret; |
| |
| dev_dbg(dev, "%s()\n", __func__); |
| |
| genpd = dev_to_genpd(dev); |
| if (IS_ERR(genpd)) |
| return -EINVAL; |
| |
| /* |
| * A runtime PM centric subsystem/driver may re-use the runtime PM |
| * callbacks for other purposes than runtime PM. In those scenarios |
| * runtime PM is disabled. Under these circumstances, we shall skip |
| * validating/measuring the PM QoS latency. |
| */ |
| stop_ok = genpd->gov ? genpd->gov->stop_ok : NULL; |
| if (runtime_pm && stop_ok && !stop_ok(dev)) |
| return -EBUSY; |
| |
| /* Measure suspend latency. */ |
| if (runtime_pm) |
| time_start = ktime_get(); |
| |
| ret = genpd_save_dev(genpd, dev); |
| if (ret) |
| return ret; |
| |
| ret = genpd_stop_dev(genpd, dev); |
| if (ret) { |
| genpd_restore_dev(genpd, dev); |
| return ret; |
| } |
| |
| /* Update suspend latency value if the measured time exceeds it. */ |
| if (runtime_pm) { |
| elapsed_ns = ktime_to_ns(ktime_sub(ktime_get(), time_start)); |
| if (elapsed_ns > td->suspend_latency_ns) { |
| td->suspend_latency_ns = elapsed_ns; |
| dev_dbg(dev, "suspend latency exceeded, %lld ns\n", |
| elapsed_ns); |
| genpd->max_off_time_changed = true; |
| td->constraint_changed = true; |
| } |
| } |
| |
| /* |
| * If power.irq_safe is set, this routine will be run with interrupts |
| * off, so it can't use mutexes. |
| */ |
| if (dev->power.irq_safe) |
| return 0; |
| |
| mutex_lock(&genpd->lock); |
| genpd_poweroff(genpd, false); |
| mutex_unlock(&genpd->lock); |
| |
| return 0; |
| } |
| |
| /** |
| * pm_genpd_runtime_resume - Resume a device belonging to I/O PM domain. |
| * @dev: Device to resume. |
| * |
| * Carry out a runtime resume of a device under the assumption that its |
| * pm_domain field points to the domain member of an object of type |
| * struct generic_pm_domain representing a PM domain consisting of I/O devices. |
| */ |
| static int pm_genpd_runtime_resume(struct device *dev) |
| { |
| struct generic_pm_domain *genpd; |
| struct gpd_timing_data *td = &dev_gpd_data(dev)->td; |
| bool runtime_pm = pm_runtime_enabled(dev); |
| ktime_t time_start; |
| s64 elapsed_ns; |
| int ret; |
| bool timed = true; |
| |
| dev_dbg(dev, "%s()\n", __func__); |
| |
| genpd = dev_to_genpd(dev); |
| if (IS_ERR(genpd)) |
| return -EINVAL; |
| |
| /* If power.irq_safe, the PM domain is never powered off. */ |
| if (dev->power.irq_safe) { |
| timed = false; |
| goto out; |
| } |
| |
| mutex_lock(&genpd->lock); |
| ret = __genpd_poweron(genpd); |
| mutex_unlock(&genpd->lock); |
| |
| if (ret) |
| return ret; |
| |
| out: |
| /* Measure resume latency. */ |
| if (timed && runtime_pm) |
| time_start = ktime_get(); |
| |
| genpd_start_dev(genpd, dev); |
| genpd_restore_dev(genpd, dev); |
| |
| /* Update resume latency value if the measured time exceeds it. */ |
| if (timed && runtime_pm) { |
| elapsed_ns = ktime_to_ns(ktime_sub(ktime_get(), time_start)); |
| if (elapsed_ns > td->resume_latency_ns) { |
| td->resume_latency_ns = elapsed_ns; |
| dev_dbg(dev, "resume latency exceeded, %lld ns\n", |
| elapsed_ns); |
| genpd->max_off_time_changed = true; |
| td->constraint_changed = true; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static bool pd_ignore_unused; |
| static int __init pd_ignore_unused_setup(char *__unused) |
| { |
| pd_ignore_unused = true; |
| return 1; |
| } |
| __setup("pd_ignore_unused", pd_ignore_unused_setup); |
| |
| /** |
| * genpd_poweroff_unused - Power off all PM domains with no devices in use. |
| */ |
| static int __init genpd_poweroff_unused(void) |
| { |
| struct generic_pm_domain *genpd; |
| |
| if (pd_ignore_unused) { |
| pr_warn("genpd: Not disabling unused power domains\n"); |
| return 0; |
| } |
| |
| mutex_lock(&gpd_list_lock); |
| |
| list_for_each_entry(genpd, &gpd_list, gpd_list_node) |
| genpd_queue_power_off_work(genpd); |
| |
| mutex_unlock(&gpd_list_lock); |
| |
| return 0; |
| } |
| late_initcall(genpd_poweroff_unused); |
| |
| #ifdef CONFIG_PM_SLEEP |
| |
| /** |
| * pm_genpd_present - Check if the given PM domain has been initialized. |
| * @genpd: PM domain to check. |
| */ |
| static bool pm_genpd_present(const struct generic_pm_domain *genpd) |
| { |
| const struct generic_pm_domain *gpd; |
| |
| if (IS_ERR_OR_NULL(genpd)) |
| return false; |
| |
| list_for_each_entry(gpd, &gpd_list, gpd_list_node) |
| if (gpd == genpd) |
| return true; |
| |
| return false; |
| } |
| |
| static bool genpd_dev_active_wakeup(struct generic_pm_domain *genpd, |
| struct device *dev) |
| { |
| return GENPD_DEV_CALLBACK(genpd, bool, active_wakeup, dev); |
| } |
| |
| /** |
| * pm_genpd_sync_poweroff - Synchronously power off a PM domain and its masters. |
| * @genpd: PM domain to power off, if possible. |
| * @timed: True if latency measurements are allowed. |
| * |
| * Check if the given PM domain can be powered off (during system suspend or |
| * hibernation) and do that if so. Also, in that case propagate to its masters. |
| * |
| * This function is only called in "noirq" and "syscore" stages of system power |
| * transitions, so it need not acquire locks (all of the "noirq" callbacks are |
| * executed sequentially, so it is guaranteed that it will never run twice in |
| * parallel). |
| */ |
| static void pm_genpd_sync_poweroff(struct generic_pm_domain *genpd, |
| bool timed) |
| { |
| struct gpd_link *link; |
| |
| if (genpd->status == GPD_STATE_POWER_OFF) |
| return; |
| |
| if (genpd->suspended_count != genpd->device_count |
| || atomic_read(&genpd->sd_count) > 0) |
| return; |
| |
| genpd_power_off(genpd, timed); |
| |
| genpd->status = GPD_STATE_POWER_OFF; |
| |
| list_for_each_entry(link, &genpd->slave_links, slave_node) { |
| genpd_sd_counter_dec(link->master); |
| pm_genpd_sync_poweroff(link->master, timed); |
| } |
| } |
| |
| /** |
| * pm_genpd_sync_poweron - Synchronously power on a PM domain and its masters. |
| * @genpd: PM domain to power on. |
| * @timed: True if latency measurements are allowed. |
| * |
| * This function is only called in "noirq" and "syscore" stages of system power |
| * transitions, so it need not acquire locks (all of the "noirq" callbacks are |
| * executed sequentially, so it is guaranteed that it will never run twice in |
| * parallel). |
| */ |
| static void pm_genpd_sync_poweron(struct generic_pm_domain *genpd, |
| bool timed) |
| { |
| struct gpd_link *link; |
| |
| if (genpd->status == GPD_STATE_ACTIVE) |
| return; |
| |
| list_for_each_entry(link, &genpd->slave_links, slave_node) { |
| pm_genpd_sync_poweron(link->master, timed); |
| genpd_sd_counter_inc(link->master); |
| } |
| |
| genpd_power_on(genpd, timed); |
| |
| genpd->status = GPD_STATE_ACTIVE; |
| } |
| |
| /** |
| * resume_needed - Check whether to resume a device before system suspend. |
| * @dev: Device to check. |
| * @genpd: PM domain the device belongs to. |
| * |
| * There are two cases in which a device that can wake up the system from sleep |
| * states should be resumed by pm_genpd_prepare(): (1) if the device is enabled |
| * to wake up the system and it has to remain active for this purpose while the |
| * system is in the sleep state and (2) if the device is not enabled to wake up |
| * the system from sleep states and it generally doesn't generate wakeup signals |
| * by itself (those signals are generated on its behalf by other parts of the |
| * system). In the latter case it may be necessary to reconfigure the device's |
| * wakeup settings during system suspend, because it may have been set up to |
| * signal remote wakeup from the system's working state as needed by runtime PM. |
| * Return 'true' in either of the above cases. |
| */ |
| static bool resume_needed(struct device *dev, struct generic_pm_domain *genpd) |
| { |
| bool active_wakeup; |
| |
| if (!device_can_wakeup(dev)) |
| return false; |
| |
| active_wakeup = genpd_dev_active_wakeup(genpd, dev); |
| return device_may_wakeup(dev) ? active_wakeup : !active_wakeup; |
| } |
| |
| /** |
| * pm_genpd_prepare - Start power transition of a device in a PM domain. |
| * @dev: Device to start the transition of. |
| * |
| * Start a power transition of a device (during a system-wide power transition) |
| * under the assumption that its pm_domain field points to the domain member of |
| * an object of type struct generic_pm_domain representing a PM domain |
| * consisting of I/O devices. |
| */ |
| static int pm_genpd_prepare(struct device *dev) |
| { |
| struct generic_pm_domain *genpd; |
| int ret; |
| |
| dev_dbg(dev, "%s()\n", __func__); |
| |
| genpd = dev_to_genpd(dev); |
| if (IS_ERR(genpd)) |
| return -EINVAL; |
| |
| /* |
| * If a wakeup request is pending for the device, it should be woken up |
| * at this point and a system wakeup event should be reported if it's |
| * set up to wake up the system from sleep states. |
| */ |
| pm_runtime_get_noresume(dev); |
| if (pm_runtime_barrier(dev) && device_may_wakeup(dev)) |
| pm_wakeup_event(dev, 0); |
| |
| if (pm_wakeup_pending()) { |
| pm_runtime_put(dev); |
| return -EBUSY; |
| } |
| |
| if (resume_needed(dev, genpd)) |
| pm_runtime_resume(dev); |
| |
| mutex_lock(&genpd->lock); |
| |
| if (genpd->prepared_count++ == 0) { |
| genpd->suspended_count = 0; |
| genpd->suspend_power_off = genpd->status == GPD_STATE_POWER_OFF; |
| } |
| |
| mutex_unlock(&genpd->lock); |
| |
| if (genpd->suspend_power_off) { |
| pm_runtime_put_noidle(dev); |
| return 0; |
| } |
| |
| /* |
| * The PM domain must be in the GPD_STATE_ACTIVE state at this point, |
| * so genpd_poweron() will return immediately, but if the device |
| * is suspended (e.g. it's been stopped by genpd_stop_dev()), we need |
| * to make it operational. |
| */ |
| pm_runtime_resume(dev); |
| __pm_runtime_disable(dev, false); |
| |
| ret = pm_generic_prepare(dev); |
| if (ret) { |
| mutex_lock(&genpd->lock); |
| |
| if (--genpd->prepared_count == 0) |
| genpd->suspend_power_off = false; |
| |
| mutex_unlock(&genpd->lock); |
| pm_runtime_enable(dev); |
| } |
| |
| pm_runtime_put(dev); |
| return ret; |
| } |
| |
| /** |
| * pm_genpd_suspend - Suspend a device belonging to an I/O PM domain. |
| * @dev: Device to suspend. |
| * |
| * Suspend a device under the assumption that its pm_domain field points to the |
| * domain member of an object of type struct generic_pm_domain representing |
| * a PM domain consisting of I/O devices. |
| */ |
| static int pm_genpd_suspend(struct device *dev) |
| { |
| struct generic_pm_domain *genpd; |
| |
| dev_dbg(dev, "%s()\n", __func__); |
| |
| genpd = dev_to_genpd(dev); |
| if (IS_ERR(genpd)) |
| return -EINVAL; |
| |
| return genpd->suspend_power_off ? 0 : pm_generic_suspend(dev); |
| } |
| |
| /** |
| * pm_genpd_suspend_late - Late suspend of a device from an I/O PM domain. |
| * @dev: Device to suspend. |
| * |
| * Carry out a late suspend of a device under the assumption that its |
| * pm_domain field points to the domain member of an object of type |
| * struct generic_pm_domain representing a PM domain consisting of I/O devices. |
| */ |
| static int pm_genpd_suspend_late(struct device *dev) |
| { |
| struct generic_pm_domain *genpd; |
| |
| dev_dbg(dev, "%s()\n", __func__); |
| |
| genpd = dev_to_genpd(dev); |
| if (IS_ERR(genpd)) |
| return -EINVAL; |
| |
| return genpd->suspend_power_off ? 0 : pm_generic_suspend_late(dev); |
| } |
| |
| /** |
| * pm_genpd_suspend_noirq - Completion of suspend of device in an I/O PM domain. |
| * @dev: Device to suspend. |
| * |
| * Stop the device and remove power from the domain if all devices in it have |
| * been stopped. |
| */ |
| static int pm_genpd_suspend_noirq(struct device *dev) |
| { |
| struct generic_pm_domain *genpd; |
| |
| dev_dbg(dev, "%s()\n", __func__); |
| |
| genpd = dev_to_genpd(dev); |
| if (IS_ERR(genpd)) |
| return -EINVAL; |
| |
| if (genpd->suspend_power_off |
| || (dev->power.wakeup_path && genpd_dev_active_wakeup(genpd, dev))) |
| return 0; |
| |
| genpd_stop_dev(genpd, dev); |
| |
| /* |
| * Since all of the "noirq" callbacks are executed sequentially, it is |
| * guaranteed that this function will never run twice in parallel for |
| * the same PM domain, so it is not necessary to use locking here. |
| */ |
| genpd->suspended_count++; |
| pm_genpd_sync_poweroff(genpd, true); |
| |
| return 0; |
| } |
| |
| /** |
| * pm_genpd_resume_noirq - Start of resume of device in an I/O PM domain. |
| * @dev: Device to resume. |
| * |
| * Restore power to the device's PM domain, if necessary, and start the device. |
| */ |
| static int pm_genpd_resume_noirq(struct device *dev) |
| { |
| struct generic_pm_domain *genpd; |
| |
| dev_dbg(dev, "%s()\n", __func__); |
| |
| genpd = dev_to_genpd(dev); |
| if (IS_ERR(genpd)) |
| return -EINVAL; |
| |
| if (genpd->suspend_power_off |
| || (dev->power.wakeup_path && genpd_dev_active_wakeup(genpd, dev))) |
| return 0; |
| |
| /* |
| * Since all of the "noirq" callbacks are executed sequentially, it is |
| * guaranteed that this function will never run twice in parallel for |
| * the same PM domain, so it is not necessary to use locking here. |
| */ |
| pm_genpd_sync_poweron(genpd, true); |
| genpd->suspended_count--; |
| |
| return genpd_start_dev(genpd, dev); |
| } |
| |
| /** |
| * pm_genpd_resume_early - Early resume of a device in an I/O PM domain. |
| * @dev: Device to resume. |
| * |
| * Carry out an early resume of a device under the assumption that its |
| * pm_domain field points to the domain member of an object of type |
| * struct generic_pm_domain representing a power domain consisting of I/O |
| * devices. |
| */ |
| static int pm_genpd_resume_early(struct device *dev) |
| { |
| struct generic_pm_domain *genpd; |
| |
| dev_dbg(dev, "%s()\n", __func__); |
| |
| genpd = dev_to_genpd(dev); |
| if (IS_ERR(genpd)) |
| return -EINVAL; |
| |
| return genpd->suspend_power_off ? 0 : pm_generic_resume_early(dev); |
| } |
| |
| /** |
| * pm_genpd_resume - Resume of device in an I/O PM domain. |
| * @dev: Device to resume. |
| * |
| * Resume a device under the assumption that its pm_domain field points to the |
| * domain member of an object of type struct generic_pm_domain representing |
| * a power domain consisting of I/O devices. |
| */ |
| static int pm_genpd_resume(struct device *dev) |
| { |
| struct generic_pm_domain *genpd; |
| |
| dev_dbg(dev, "%s()\n", __func__); |
| |
| genpd = dev_to_genpd(dev); |
| if (IS_ERR(genpd)) |
| return -EINVAL; |
| |
| return genpd->suspend_power_off ? 0 : pm_generic_resume(dev); |
| } |
| |
| /** |
| * pm_genpd_freeze - Freezing a device in an I/O PM domain. |
| * @dev: Device to freeze. |
| * |
| * Freeze a device under the assumption that its pm_domain field points to the |
| * domain member of an object of type struct generic_pm_domain representing |
| * a power domain consisting of I/O devices. |
| */ |
| static int pm_genpd_freeze(struct device *dev) |
| { |
| struct generic_pm_domain *genpd; |
| |
| dev_dbg(dev, "%s()\n", __func__); |
| |
| genpd = dev_to_genpd(dev); |
| if (IS_ERR(genpd)) |
| return -EINVAL; |
| |
| return genpd->suspend_power_off ? 0 : pm_generic_freeze(dev); |
| } |
| |
| /** |
| * pm_genpd_freeze_late - Late freeze of a device in an I/O PM domain. |
| * @dev: Device to freeze. |
| * |
| * Carry out a late freeze of a device under the assumption that its |
| * pm_domain field points to the domain member of an object of type |
| * struct generic_pm_domain representing a power domain consisting of I/O |
| * devices. |
| */ |
| static int pm_genpd_freeze_late(struct device *dev) |
| { |
| struct generic_pm_domain *genpd; |
| |
| dev_dbg(dev, "%s()\n", __func__); |
| |
| genpd = dev_to_genpd(dev); |
| if (IS_ERR(genpd)) |
| return -EINVAL; |
| |
| return genpd->suspend_power_off ? 0 : pm_generic_freeze_late(dev); |
| } |
| |
| /** |
| * pm_genpd_freeze_noirq - Completion of freezing a device in an I/O PM domain. |
| * @dev: Device to freeze. |
| * |
| * Carry out a late freeze of a device under the assumption that its |
| * pm_domain field points to the domain member of an object of type |
| * struct generic_pm_domain representing a power domain consisting of I/O |
| * devices. |
| */ |
| static int pm_genpd_freeze_noirq(struct device *dev) |
| { |
| struct generic_pm_domain *genpd; |
| |
| dev_dbg(dev, "%s()\n", __func__); |
| |
| genpd = dev_to_genpd(dev); |
| if (IS_ERR(genpd)) |
| return -EINVAL; |
| |
| return genpd->suspend_power_off ? 0 : genpd_stop_dev(genpd, dev); |
| } |
| |
| /** |
| * pm_genpd_thaw_noirq - Early thaw of device in an I/O PM domain. |
| * @dev: Device to thaw. |
| * |
| * Start the device, unless power has been removed from the domain already |
| * before the system transition. |
| */ |
| static int pm_genpd_thaw_noirq(struct device *dev) |
| { |
| struct generic_pm_domain *genpd; |
| |
| dev_dbg(dev, "%s()\n", __func__); |
| |
| genpd = dev_to_genpd(dev); |
| if (IS_ERR(genpd)) |
| return -EINVAL; |
| |
| return genpd->suspend_power_off ? |
| 0 : genpd_start_dev(genpd, dev); |
| } |
| |
| /** |
| * pm_genpd_thaw_early - Early thaw of device in an I/O PM domain. |
| * @dev: Device to thaw. |
| * |
| * Carry out an early thaw of a device under the assumption that its |
| * pm_domain field points to the domain member of an object of type |
| * struct generic_pm_domain representing a power domain consisting of I/O |
| * devices. |
| */ |
| static int pm_genpd_thaw_early(struct device *dev) |
| { |
| struct generic_pm_domain *genpd; |
| |
| dev_dbg(dev, "%s()\n", __func__); |
| |
| genpd = dev_to_genpd(dev); |
| if (IS_ERR(genpd)) |
| return -EINVAL; |
| |
| return genpd->suspend_power_off ? 0 : pm_generic_thaw_early(dev); |
| } |
| |
| /** |
| * pm_genpd_thaw - Thaw a device belonging to an I/O power domain. |
| * @dev: Device to thaw. |
| * |
| * Thaw a device under the assumption that its pm_domain field points to the |
| * domain member of an object of type struct generic_pm_domain representing |
| * a power domain consisting of I/O devices. |
| */ |
| static int pm_genpd_thaw(struct device *dev) |
| { |
| struct generic_pm_domain *genpd; |
| |
| dev_dbg(dev, "%s()\n", __func__); |
| |
| genpd = dev_to_genpd(dev); |
| if (IS_ERR(genpd)) |
| return -EINVAL; |
| |
| return genpd->suspend_power_off ? 0 : pm_generic_thaw(dev); |
| } |
| |
| /** |
| * pm_genpd_restore_noirq - Start of restore of device in an I/O PM domain. |
| * @dev: Device to resume. |
| * |
| * Make sure the domain will be in the same power state as before the |
| * hibernation the system is resuming from and start the device if necessary. |
| */ |
| static int pm_genpd_restore_noirq(struct device *dev) |
| { |
| struct generic_pm_domain *genpd; |
| |
| dev_dbg(dev, "%s()\n", __func__); |
| |
| genpd = dev_to_genpd(dev); |
| if (IS_ERR(genpd)) |
| return -EINVAL; |
| |
| /* |
| * Since all of the "noirq" callbacks are executed sequentially, it is |
| * guaranteed that this function will never run twice in parallel for |
| * the same PM domain, so it is not necessary to use locking here. |
| * |
| * At this point suspended_count == 0 means we are being run for the |
| * first time for the given domain in the present cycle. |
| */ |
| if (genpd->suspended_count++ == 0) { |
| /* |
| * The boot kernel might put the domain into arbitrary state, |
| * so make it appear as powered off to pm_genpd_sync_poweron(), |
| * so that it tries to power it on in case it was really off. |
| */ |
| genpd->status = GPD_STATE_POWER_OFF; |
| if (genpd->suspend_power_off) { |
| /* |
| * If the domain was off before the hibernation, make |
| * sure it will be off going forward. |
| */ |
| genpd_power_off(genpd, true); |
| |
| return 0; |
| } |
| } |
| |
| if (genpd->suspend_power_off) |
| return 0; |
| |
| pm_genpd_sync_poweron(genpd, true); |
| |
| return genpd_start_dev(genpd, dev); |
| } |
| |
| /** |
| * pm_genpd_complete - Complete power transition of a device in a power domain. |
| * @dev: Device to complete the transition of. |
| * |
| * Complete a power transition of a device (during a system-wide power |
| * transition) under the assumption that its pm_domain field points to the |
| * domain member of an object of type struct generic_pm_domain representing |
| * a power domain consisting of I/O devices. |
| */ |
| static void pm_genpd_complete(struct device *dev) |
| { |
| struct generic_pm_domain *genpd; |
| bool run_complete; |
| |
| dev_dbg(dev, "%s()\n", __func__); |
| |
| genpd = dev_to_genpd(dev); |
| if (IS_ERR(genpd)) |
| return; |
| |
| mutex_lock(&genpd->lock); |
| |
| run_complete = !genpd->suspend_power_off; |
| if (--genpd->prepared_count == 0) |
| genpd->suspend_power_off = false; |
| |
| mutex_unlock(&genpd->lock); |
| |
| if (run_complete) { |
| pm_generic_complete(dev); |
| pm_runtime_set_active(dev); |
| pm_runtime_enable(dev); |
| pm_request_idle(dev); |
| } |
| } |
| |
| /** |
| * genpd_syscore_switch - Switch power during system core suspend or resume. |
| * @dev: Device that normally is marked as "always on" to switch power for. |
| * |
| * This routine may only be called during the system core (syscore) suspend or |
| * resume phase for devices whose "always on" flags are set. |
| */ |
| static void genpd_syscore_switch(struct device *dev, bool suspend) |
| { |
| struct generic_pm_domain *genpd; |
| |
| genpd = dev_to_genpd(dev); |
| if (!pm_genpd_present(genpd)) |
| return; |
| |
| if (suspend) { |
| genpd->suspended_count++; |
| pm_genpd_sync_poweroff(genpd, false); |
| } else { |
| pm_genpd_sync_poweron(genpd, false); |
| genpd->suspended_count--; |
| } |
| } |
| |
| void pm_genpd_syscore_poweroff(struct device *dev) |
| { |
| genpd_syscore_switch(dev, true); |
| } |
| EXPORT_SYMBOL_GPL(pm_genpd_syscore_poweroff); |
| |
| void pm_genpd_syscore_poweron(struct device *dev) |
| { |
| genpd_syscore_switch(dev, false); |
| } |
| EXPORT_SYMBOL_GPL(pm_genpd_syscore_poweron); |
| |
| #else /* !CONFIG_PM_SLEEP */ |
| |
| #define pm_genpd_prepare NULL |
| #define pm_genpd_suspend NULL |
| #define pm_genpd_suspend_late NULL |
| #define pm_genpd_suspend_noirq NULL |
| #define pm_genpd_resume_early NULL |
| #define pm_genpd_resume_noirq NULL |
| #define pm_genpd_resume NULL |
| #define pm_genpd_freeze NULL |
| #define pm_genpd_freeze_late NULL |
| #define pm_genpd_freeze_noirq NULL |
| #define pm_genpd_thaw_early NULL |
| #define pm_genpd_thaw_noirq NULL |
| #define pm_genpd_thaw NULL |
| #define pm_genpd_restore_noirq NULL |
| #define pm_genpd_complete NULL |
| |
| #endif /* CONFIG_PM_SLEEP */ |
| |
| static struct generic_pm_domain_data *genpd_alloc_dev_data(struct device *dev, |
| struct generic_pm_domain *genpd, |
| struct gpd_timing_data *td) |
| { |
| struct generic_pm_domain_data *gpd_data; |
| int ret; |
| |
| ret = dev_pm_get_subsys_data(dev); |
| if (ret) |
| return ERR_PTR(ret); |
| |
| gpd_data = kzalloc(sizeof(*gpd_data), GFP_KERNEL); |
| if (!gpd_data) { |
| ret = -ENOMEM; |
| goto err_put; |
| } |
| |
| if (td) |
| gpd_data->td = *td; |
| |
| gpd_data->base.dev = dev; |
| gpd_data->td.constraint_changed = true; |
| gpd_data->td.effective_constraint_ns = -1; |
| gpd_data->nb.notifier_call = genpd_dev_pm_qos_notifier; |
| |
| spin_lock_irq(&dev->power.lock); |
| |
| if (dev->power.subsys_data->domain_data) { |
| ret = -EINVAL; |
| goto err_free; |
| } |
| |
| dev->power.subsys_data->domain_data = &gpd_data->base; |
| |
| spin_unlock_irq(&dev->power.lock); |
| |
| dev_pm_domain_set(dev, &genpd->domain); |
| |
| return gpd_data; |
| |
| err_free: |
| spin_unlock_irq(&dev->power.lock); |
| kfree(gpd_data); |
| err_put: |
| dev_pm_put_subsys_data(dev); |
| return ERR_PTR(ret); |
| } |
| |
| static void genpd_free_dev_data(struct device *dev, |
| struct generic_pm_domain_data *gpd_data) |
| { |
| dev_pm_domain_set(dev, NULL); |
| |
| spin_lock_irq(&dev->power.lock); |
| |
| dev->power.subsys_data->domain_data = NULL; |
| |
| spin_unlock_irq(&dev->power.lock); |
| |
| kfree(gpd_data); |
| dev_pm_put_subsys_data(dev); |
| } |
| |
| /** |
| * __pm_genpd_add_device - Add a device to an I/O PM domain. |
| * @genpd: PM domain to add the device to. |
| * @dev: Device to be added. |
| * @td: Set of PM QoS timing parameters to attach to the device. |
| */ |
| int __pm_genpd_add_device(struct generic_pm_domain *genpd, struct device *dev, |
| struct gpd_timing_data *td) |
| { |
| struct generic_pm_domain_data *gpd_data; |
| int ret = 0; |
| |
| dev_dbg(dev, "%s()\n", __func__); |
| |
| if (IS_ERR_OR_NULL(genpd) || IS_ERR_OR_NULL(dev)) |
| return -EINVAL; |
| |
| gpd_data = genpd_alloc_dev_data(dev, genpd, td); |
| if (IS_ERR(gpd_data)) |
| return PTR_ERR(gpd_data); |
| |
| mutex_lock(&genpd->lock); |
| |
| if (genpd->prepared_count > 0) { |
| ret = -EAGAIN; |
| goto out; |
| } |
| |
| ret = genpd->attach_dev ? genpd->attach_dev(genpd, dev) : 0; |
| if (ret) |
| goto out; |
| |
| genpd->device_count++; |
| genpd->max_off_time_changed = true; |
| |
| list_add_tail(&gpd_data->base.list_node, &genpd->dev_list); |
| |
| out: |
| mutex_unlock(&genpd->lock); |
| |
| if (ret) |
| genpd_free_dev_data(dev, gpd_data); |
| else |
| dev_pm_qos_add_notifier(dev, &gpd_data->nb); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(__pm_genpd_add_device); |
| |
| /** |
| * pm_genpd_remove_device - Remove a device from an I/O PM domain. |
| * @genpd: PM domain to remove the device from. |
| * @dev: Device to be removed. |
| */ |
| int pm_genpd_remove_device(struct generic_pm_domain *genpd, |
| struct device *dev) |
| { |
| struct generic_pm_domain_data *gpd_data; |
| struct pm_domain_data *pdd; |
| int ret = 0; |
| |
| dev_dbg(dev, "%s()\n", __func__); |
| |
| if (!genpd || genpd != pm_genpd_lookup_dev(dev)) |
| return -EINVAL; |
| |
| /* The above validation also means we have existing domain_data. */ |
| pdd = dev->power.subsys_data->domain_data; |
| gpd_data = to_gpd_data(pdd); |
| dev_pm_qos_remove_notifier(dev, &gpd_data->nb); |
| |
| mutex_lock(&genpd->lock); |
| |
| if (genpd->prepared_count > 0) { |
| ret = -EAGAIN; |
| goto out; |
| } |
| |
| genpd->device_count--; |
| genpd->max_off_time_changed = true; |
| |
| if (genpd->detach_dev) |
| genpd->detach_dev(genpd, dev); |
| |
| list_del_init(&pdd->list_node); |
| |
| mutex_unlock(&genpd->lock); |
| |
| genpd_free_dev_data(dev, gpd_data); |
| |
| return 0; |
| |
| out: |
| mutex_unlock(&genpd->lock); |
| dev_pm_qos_add_notifier(dev, &gpd_data->nb); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(pm_genpd_remove_device); |
| |
| /** |
| * pm_genpd_add_subdomain - Add a subdomain to an I/O PM domain. |
| * @genpd: Master PM domain to add the subdomain to. |
| * @subdomain: Subdomain to be added. |
| */ |
| int pm_genpd_add_subdomain(struct generic_pm_domain *genpd, |
| struct generic_pm_domain *subdomain) |
| { |
| struct gpd_link *link, *itr; |
| int ret = 0; |
| |
| if (IS_ERR_OR_NULL(genpd) || IS_ERR_OR_NULL(subdomain) |
| || genpd == subdomain) |
| return -EINVAL; |
| |
| link = kzalloc(sizeof(*link), GFP_KERNEL); |
| if (!link) |
| return -ENOMEM; |
| |
| mutex_lock(&genpd->lock); |
| mutex_lock_nested(&subdomain->lock, SINGLE_DEPTH_NESTING); |
| |
| if (genpd->status == GPD_STATE_POWER_OFF |
| && subdomain->status != GPD_STATE_POWER_OFF) { |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| list_for_each_entry(itr, &genpd->master_links, master_node) { |
| if (itr->slave == subdomain && itr->master == genpd) { |
| ret = -EINVAL; |
| goto out; |
| } |
| } |
| |
| link->master = genpd; |
| list_add_tail(&link->master_node, &genpd->master_links); |
| link->slave = subdomain; |
| list_add_tail(&link->slave_node, &subdomain->slave_links); |
| if (subdomain->status != GPD_STATE_POWER_OFF) |
| genpd_sd_counter_inc(genpd); |
| |
| out: |
| mutex_unlock(&subdomain->lock); |
| mutex_unlock(&genpd->lock); |
| if (ret) |
| kfree(link); |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(pm_genpd_add_subdomain); |
| |
| /** |
| * pm_genpd_remove_subdomain - Remove a subdomain from an I/O PM domain. |
| * @genpd: Master PM domain to remove the subdomain from. |
| * @subdomain: Subdomain to be removed. |
| */ |
| int pm_genpd_remove_subdomain(struct generic_pm_domain *genpd, |
| struct generic_pm_domain *subdomain) |
| { |
| struct gpd_link *link; |
| int ret = -EINVAL; |
| |
| if (IS_ERR_OR_NULL(genpd) || IS_ERR_OR_NULL(subdomain)) |
| return -EINVAL; |
| |
| mutex_lock(&genpd->lock); |
| |
| if (!list_empty(&subdomain->slave_links) || subdomain->device_count) { |
| pr_warn("%s: unable to remove subdomain %s\n", genpd->name, |
| subdomain->name); |
| ret = -EBUSY; |
| goto out; |
| } |
| |
| list_for_each_entry(link, &genpd->master_links, master_node) { |
| if (link->slave != subdomain) |
| continue; |
| |
| mutex_lock_nested(&subdomain->lock, SINGLE_DEPTH_NESTING); |
| |
| list_del(&link->master_node); |
| list_del(&link->slave_node); |
| kfree(link); |
| if (subdomain->status != GPD_STATE_POWER_OFF) |
| genpd_sd_counter_dec(genpd); |
| |
| mutex_unlock(&subdomain->lock); |
| |
| ret = 0; |
| break; |
| } |
| |
| out: |
| mutex_unlock(&genpd->lock); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(pm_genpd_remove_subdomain); |
| |
| /* Default device callbacks for generic PM domains. */ |
| |
| /** |
| * pm_genpd_default_save_state - Default "save device state" for PM domains. |
| * @dev: Device to handle. |
| */ |
| static int pm_genpd_default_save_state(struct device *dev) |
| { |
| int (*cb)(struct device *__dev); |
| |
| if (dev->type && dev->type->pm) |
| cb = dev->type->pm->runtime_suspend; |
| else if (dev->class && dev->class->pm) |
| cb = dev->class->pm->runtime_suspend; |
| else if (dev->bus && dev->bus->pm) |
| cb = dev->bus->pm->runtime_suspend; |
| else |
| cb = NULL; |
| |
| if (!cb && dev->driver && dev->driver->pm) |
| cb = dev->driver->pm->runtime_suspend; |
| |
| return cb ? cb(dev) : 0; |
| } |
| |
| /** |
| * pm_genpd_default_restore_state - Default PM domains "restore device state". |
| * @dev: Device to handle. |
| */ |
| static int pm_genpd_default_restore_state(struct device *dev) |
| { |
| int (*cb)(struct device *__dev); |
| |
| if (dev->type && dev->type->pm) |
| cb = dev->type->pm->runtime_resume; |
| else if (dev->class && dev->class->pm) |
| cb = dev->class->pm->runtime_resume; |
| else if (dev->bus && dev->bus->pm) |
| cb = dev->bus->pm->runtime_resume; |
| else |
| cb = NULL; |
| |
| if (!cb && dev->driver && dev->driver->pm) |
| cb = dev->driver->pm->runtime_resume; |
| |
| return cb ? cb(dev) : 0; |
| } |
| |
| /** |
| * pm_genpd_init - Initialize a generic I/O PM domain object. |
| * @genpd: PM domain object to initialize. |
| * @gov: PM domain governor to associate with the domain (may be NULL). |
| * @is_off: Initial value of the domain's power_is_off field. |
| */ |
| void pm_genpd_init(struct generic_pm_domain *genpd, |
| struct dev_power_governor *gov, bool is_off) |
| { |
| if (IS_ERR_OR_NULL(genpd)) |
| return; |
| |
| INIT_LIST_HEAD(&genpd->master_links); |
| INIT_LIST_HEAD(&genpd->slave_links); |
| INIT_LIST_HEAD(&genpd->dev_list); |
| mutex_init(&genpd->lock); |
| genpd->gov = gov; |
| INIT_WORK(&genpd->power_off_work, genpd_power_off_work_fn); |
| atomic_set(&genpd->sd_count, 0); |
| genpd->status = is_off ? GPD_STATE_POWER_OFF : GPD_STATE_ACTIVE; |
| genpd->device_count = 0; |
| genpd->max_off_time_ns = -1; |
| genpd->max_off_time_changed = true; |
| genpd->domain.ops.runtime_suspend = pm_genpd_runtime_suspend; |
| genpd->domain.ops.runtime_resume = pm_genpd_runtime_resume; |
| genpd->domain.ops.prepare = pm_genpd_prepare; |
| genpd->domain.ops.suspend = pm_genpd_suspend; |
| genpd->domain.ops.suspend_late = pm_genpd_suspend_late; |
| genpd->domain.ops.suspend_noirq = pm_genpd_suspend_noirq; |
| genpd->domain.ops.resume_noirq = pm_genpd_resume_noirq; |
| genpd->domain.ops.resume_early = pm_genpd_resume_early; |
| genpd->domain.ops.resume = pm_genpd_resume; |
| genpd->domain.ops.freeze = pm_genpd_freeze; |
| genpd->domain.ops.freeze_late = pm_genpd_freeze_late; |
| genpd->domain.ops.freeze_noirq = pm_genpd_freeze_noirq; |
| genpd->domain.ops.thaw_noirq = pm_genpd_thaw_noirq; |
| genpd->domain.ops.thaw_early = pm_genpd_thaw_early; |
| genpd->domain.ops.thaw = pm_genpd_thaw; |
| genpd->domain.ops.poweroff = pm_genpd_suspend; |
| genpd->domain.ops.poweroff_late = pm_genpd_suspend_late; |
| genpd->domain.ops.poweroff_noirq = pm_genpd_suspend_noirq; |
| genpd->domain.ops.restore_noirq = pm_genpd_restore_noirq; |
| genpd->domain.ops.restore_early = pm_genpd_resume_early; |
| genpd->domain.ops.restore = pm_genpd_resume; |
| genpd->domain.ops.complete = pm_genpd_complete; |
| genpd->dev_ops.save_state = pm_genpd_default_save_state; |
| genpd->dev_ops.restore_state = pm_genpd_default_restore_state; |
| |
| if (genpd->flags & GENPD_FLAG_PM_CLK) { |
| genpd->dev_ops.stop = pm_clk_suspend; |
| genpd->dev_ops.start = pm_clk_resume; |
| } |
| |
| mutex_lock(&gpd_list_lock); |
| list_add(&genpd->gpd_list_node, &gpd_list); |
| mutex_unlock(&gpd_list_lock); |
| } |
| EXPORT_SYMBOL_GPL(pm_genpd_init); |
| |
| #ifdef CONFIG_PM_GENERIC_DOMAINS_OF |
| /* |
| * Device Tree based PM domain providers. |
| * |
| * The code below implements generic device tree based PM domain providers that |
| * bind device tree nodes with generic PM domains registered in the system. |
| * |
| * Any driver that registers generic PM domains and needs to support binding of |
| * devices to these domains is supposed to register a PM domain provider, which |
| * maps a PM domain specifier retrieved from the device tree to a PM domain. |
| * |
| * Two simple mapping functions have been provided for convenience: |
| * - __of_genpd_xlate_simple() for 1:1 device tree node to PM domain mapping. |
| * - __of_genpd_xlate_onecell() for mapping of multiple PM domains per node by |
| * index. |
| */ |
| |
| /** |
| * struct of_genpd_provider - PM domain provider registration structure |
| * @link: Entry in global list of PM domain providers |
| * @node: Pointer to device tree node of PM domain provider |
| * @xlate: Provider-specific xlate callback mapping a set of specifier cells |
| * into a PM domain. |
| * @data: context pointer to be passed into @xlate callback |
| */ |
| struct of_genpd_provider { |
| struct list_head link; |
| struct device_node *node; |
| genpd_xlate_t xlate; |
| void *data; |
| }; |
| |
| /* List of registered PM domain providers. */ |
| static LIST_HEAD(of_genpd_providers); |
| /* Mutex to protect the list above. */ |
| static DEFINE_MUTEX(of_genpd_mutex); |
| |
| /** |
| * __of_genpd_xlate_simple() - Xlate function for direct node-domain mapping |
| * @genpdspec: OF phandle args to map into a PM domain |
| * @data: xlate function private data - pointer to struct generic_pm_domain |
| * |
| * This is a generic xlate function that can be used to model PM domains that |
| * have their own device tree nodes. The private data of xlate function needs |
| * to be a valid pointer to struct generic_pm_domain. |
| */ |
| struct generic_pm_domain *__of_genpd_xlate_simple( |
| struct of_phandle_args *genpdspec, |
| void *data) |
| { |
| if (genpdspec->args_count != 0) |
| return ERR_PTR(-EINVAL); |
| return data; |
| } |
| EXPORT_SYMBOL_GPL(__of_genpd_xlate_simple); |
| |
| /** |
| * __of_genpd_xlate_onecell() - Xlate function using a single index. |
| * @genpdspec: OF phandle args to map into a PM domain |
| * @data: xlate function private data - pointer to struct genpd_onecell_data |
| * |
| * This is a generic xlate function that can be used to model simple PM domain |
| * controllers that have one device tree node and provide multiple PM domains. |
| * A single cell is used as an index into an array of PM domains specified in |
| * the genpd_onecell_data struct when registering the provider. |
| */ |
| struct generic_pm_domain *__of_genpd_xlate_onecell( |
| struct of_phandle_args *genpdspec, |
| void *data) |
| { |
| struct genpd_onecell_data *genpd_data = data; |
| unsigned int idx = genpdspec->args[0]; |
| |
| if (genpdspec->args_count != 1) |
| return ERR_PTR(-EINVAL); |
| |
| if (idx >= genpd_data->num_domains) { |
| pr_err("%s: invalid domain index %u\n", __func__, idx); |
| return ERR_PTR(-EINVAL); |
| } |
| |
| if (!genpd_data->domains[idx]) |
| return ERR_PTR(-ENOENT); |
| |
| return genpd_data->domains[idx]; |
| } |
| EXPORT_SYMBOL_GPL(__of_genpd_xlate_onecell); |
| |
| /** |
| * __of_genpd_add_provider() - Register a PM domain provider for a node |
| * @np: Device node pointer associated with the PM domain provider. |
| * @xlate: Callback for decoding PM domain from phandle arguments. |
| * @data: Context pointer for @xlate callback. |
| */ |
| int __of_genpd_add_provider(struct device_node *np, genpd_xlate_t xlate, |
| void *data) |
| { |
| struct of_genpd_provider *cp; |
| |
| cp = kzalloc(sizeof(*cp), GFP_KERNEL); |
| if (!cp) |
| return -ENOMEM; |
| |
| cp->node = of_node_get(np); |
| cp->data = data; |
| cp->xlate = xlate; |
| |
| mutex_lock(&of_genpd_mutex); |
| list_add(&cp->link, &of_genpd_providers); |
| mutex_unlock(&of_genpd_mutex); |
| pr_debug("Added domain provider from %s\n", np->full_name); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(__of_genpd_add_provider); |
| |
| /** |
| * of_genpd_del_provider() - Remove a previously registered PM domain provider |
| * @np: Device node pointer associated with the PM domain provider |
| */ |
| void of_genpd_del_provider(struct device_node *np) |
| { |
| struct of_genpd_provider *cp; |
| |
| mutex_lock(&of_genpd_mutex); |
| list_for_each_entry(cp, &of_genpd_providers, link) { |
| if (cp->node == np) { |
| list_del(&cp->link); |
| of_node_put(cp->node); |
| kfree(cp); |
| break; |
| } |
| } |
| mutex_unlock(&of_genpd_mutex); |
| } |
| EXPORT_SYMBOL_GPL(of_genpd_del_provider); |
| |
| /** |
| * of_genpd_get_from_provider() - Look-up PM domain |
| * @genpdspec: OF phandle args to use for look-up |
| * |
| * Looks for a PM domain provider under the node specified by @genpdspec and if |
| * found, uses xlate function of the provider to map phandle args to a PM |
| * domain. |
| * |
| * Returns a valid pointer to struct generic_pm_domain on success or ERR_PTR() |
| * on failure. |
| */ |
| struct generic_pm_domain *of_genpd_get_from_provider( |
| struct of_phandle_args *genpdspec) |
| { |
| struct generic_pm_domain *genpd = ERR_PTR(-ENOENT); |
| struct of_genpd_provider *provider; |
| |
| mutex_lock(&of_genpd_mutex); |
| |
| /* Check if we have such a provider in our array */ |
| list_for_each_entry(provider, &of_genpd_providers, link) { |
| if (provider->node == genpdspec->np) |
| genpd = provider->xlate(genpdspec, provider->data); |
| if (!IS_ERR(genpd)) |
| break; |
| } |
| |
| mutex_unlock(&of_genpd_mutex); |
| |
| return genpd; |
| } |
| EXPORT_SYMBOL_GPL(of_genpd_get_from_provider); |
| |
| /** |
| * genpd_dev_pm_detach - Detach a device from its PM domain. |
| * @dev: Device to detach. |
| * @power_off: Currently not used |
| * |
| * Try to locate a corresponding generic PM domain, which the device was |
| * attached to previously. If such is found, the device is detached from it. |
| */ |
| static void genpd_dev_pm_detach(struct device *dev, bool power_off) |
| { |
| struct generic_pm_domain *pd; |
| unsigned int i; |
| int ret = 0; |
| |
| pd = pm_genpd_lookup_dev(dev); |
| if (!pd) |
| return; |
| |
| dev_dbg(dev, "removing from PM domain %s\n", pd->name); |
| |
| for (i = 1; i < GENPD_RETRY_MAX_MS; i <<= 1) { |
| ret = pm_genpd_remove_device(pd, dev); |
| if (ret != -EAGAIN) |
| break; |
| |
| mdelay(i); |
| cond_resched(); |
| } |
| |
| if (ret < 0) { |
| dev_err(dev, "failed to remove from PM domain %s: %d", |
| pd->name, ret); |
| return; |
| } |
| |
| /* Check if PM domain can be powered off after removing this device. */ |
| genpd_queue_power_off_work(pd); |
| } |
| |
| static void genpd_dev_pm_sync(struct device *dev) |
| { |
| struct generic_pm_domain *pd; |
| |
| pd = dev_to_genpd(dev); |
| if (IS_ERR(pd)) |
| return; |
| |
| genpd_queue_power_off_work(pd); |
| } |
| |
| /** |
| * genpd_dev_pm_attach - Attach a device to its PM domain using DT. |
| * @dev: Device to attach. |
| * |
| * Parse device's OF node to find a PM domain specifier. If such is found, |
| * attaches the device to retrieved pm_domain ops. |
| * |
| * Both generic and legacy Samsung-specific DT bindings are supported to keep |
| * backwards compatibility with existing DTBs. |
| * |
| * Returns 0 on successfully attached PM domain or negative error code. Note |
| * that if a power-domain exists for the device, but it cannot be found or |
| * turned on, then return -EPROBE_DEFER to ensure that the device is not |
| * probed and to re-try again later. |
| */ |
| int genpd_dev_pm_attach(struct device *dev) |
| { |
| struct of_phandle_args pd_args; |
| struct generic_pm_domain *pd; |
| unsigned int i; |
| int ret; |
| |
| if (!dev->of_node) |
| return -ENODEV; |
| |
| if (dev->pm_domain) |
| return -EEXIST; |
| |
| ret = of_parse_phandle_with_args(dev->of_node, "power-domains", |
| "#power-domain-cells", 0, &pd_args); |
| if (ret < 0) { |
| if (ret != -ENOENT) |
| return ret; |
| |
| /* |
| * Try legacy Samsung-specific bindings |
| * (for backwards compatibility of DT ABI) |
| */ |
| pd_args.args_count = 0; |
| pd_args.np = of_parse_phandle(dev->of_node, |
| "samsung,power-domain", 0); |
| if (!pd_args.np) |
| return -ENOENT; |
| } |
| |
| pd = of_genpd_get_from_provider(&pd_args); |
| of_node_put(pd_args.np); |
| if (IS_ERR(pd)) { |
| dev_dbg(dev, "%s() failed to find PM domain: %ld\n", |
| __func__, PTR_ERR(pd)); |
| return -EPROBE_DEFER; |
| } |
| |
| dev_dbg(dev, "adding to PM domain %s\n", pd->name); |
| |
| for (i = 1; i < GENPD_RETRY_MAX_MS; i <<= 1) { |
| ret = pm_genpd_add_device(pd, dev); |
| if (ret != -EAGAIN) |
| break; |
| |
| mdelay(i); |
| cond_resched(); |
| } |
| |
| if (ret < 0) { |
| dev_err(dev, "failed to add to PM domain %s: %d", |
| pd->name, ret); |
| goto out; |
| } |
| |
| dev->pm_domain->detach = genpd_dev_pm_detach; |
| dev->pm_domain->sync = genpd_dev_pm_sync; |
| ret = genpd_poweron(pd); |
| |
| out: |
| return ret ? -EPROBE_DEFER : 0; |
| } |
| EXPORT_SYMBOL_GPL(genpd_dev_pm_attach); |
| #endif /* CONFIG_PM_GENERIC_DOMAINS_OF */ |
| |
| |
| /*** debugfs support ***/ |
| |
| #ifdef CONFIG_PM_ADVANCED_DEBUG |
| #include <linux/pm.h> |
| #include <linux/device.h> |
| #include <linux/debugfs.h> |
| #include <linux/seq_file.h> |
| #include <linux/init.h> |
| #include <linux/kobject.h> |
| static struct dentry *pm_genpd_debugfs_dir; |
| |
| /* |
| * TODO: This function is a slightly modified version of rtpm_status_show |
| * from sysfs.c, so generalize it. |
| */ |
| static void rtpm_status_str(struct seq_file *s, struct device *dev) |
| { |
| static const char * const status_lookup[] = { |
| [RPM_ACTIVE] = "active", |
| [RPM_RESUMING] = "resuming", |
| [RPM_SUSPENDED] = "suspended", |
| [RPM_SUSPENDING] = "suspending" |
| }; |
| const char *p = ""; |
| |
| if (dev->power.runtime_error) |
| p = "error"; |
| else if (dev->power.disable_depth) |
| p = "unsupported"; |
| else if (dev->power.runtime_status < ARRAY_SIZE(status_lookup)) |
| p = status_lookup[dev->power.runtime_status]; |
| else |
| WARN_ON(1); |
| |
| seq_puts(s, p); |
| } |
| |
| static int pm_genpd_summary_one(struct seq_file *s, |
| struct generic_pm_domain *genpd) |
| { |
| static const char * const status_lookup[] = { |
| [GPD_STATE_ACTIVE] = "on", |
| [GPD_STATE_POWER_OFF] = "off" |
| }; |
| struct pm_domain_data *pm_data; |
| const char *kobj_path; |
| struct gpd_link *link; |
| int ret; |
| |
| ret = mutex_lock_interruptible(&genpd->lock); |
| if (ret) |
| return -ERESTARTSYS; |
| |
| if (WARN_ON(genpd->status >= ARRAY_SIZE(status_lookup))) |
| goto exit; |
| seq_printf(s, "%-30s %-15s ", genpd->name, status_lookup[genpd->status]); |
| |
| /* |
| * Modifications on the list require holding locks on both |
| * master and slave, so we are safe. |
| * Also genpd->name is immutable. |
| */ |
| list_for_each_entry(link, &genpd->master_links, master_node) { |
| seq_printf(s, "%s", link->slave->name); |
| if (!list_is_last(&link->master_node, &genpd->master_links)) |
| seq_puts(s, ", "); |
| } |
| |
| list_for_each_entry(pm_data, &genpd->dev_list, list_node) { |
| kobj_path = kobject_get_path(&pm_data->dev->kobj, GFP_KERNEL); |
| if (kobj_path == NULL) |
| continue; |
| |
| seq_printf(s, "\n %-50s ", kobj_path); |
| rtpm_status_str(s, pm_data->dev); |
| kfree(kobj_path); |
| } |
| |
| seq_puts(s, "\n"); |
| exit: |
| mutex_unlock(&genpd->lock); |
| |
| return 0; |
| } |
| |
| static int pm_genpd_summary_show(struct seq_file *s, void *data) |
| { |
| struct generic_pm_domain *genpd; |
| int ret = 0; |
| |
| seq_puts(s, "domain status slaves\n"); |
| seq_puts(s, " /device runtime status\n"); |
| seq_puts(s, "----------------------------------------------------------------------\n"); |
| |
| ret = mutex_lock_interruptible(&gpd_list_lock); |
| if (ret) |
| return -ERESTARTSYS; |
| |
| list_for_each_entry(genpd, &gpd_list, gpd_list_node) { |
| ret = pm_genpd_summary_one(s, genpd); |
| if (ret) |
| break; |
| } |
| mutex_unlock(&gpd_list_lock); |
| |
| return ret; |
| } |
| |
| static int pm_genpd_summary_open(struct inode *inode, struct file *file) |
| { |
| return single_open(file, pm_genpd_summary_show, NULL); |
| } |
| |
| static const struct file_operations pm_genpd_summary_fops = { |
| .open = pm_genpd_summary_open, |
| .read = seq_read, |
| .llseek = seq_lseek, |
| .release = single_release, |
| }; |
| |
| static int __init pm_genpd_debug_init(void) |
| { |
| struct dentry *d; |
| |
| pm_genpd_debugfs_dir = debugfs_create_dir("pm_genpd", NULL); |
| |
| if (!pm_genpd_debugfs_dir) |
| return -ENOMEM; |
| |
| d = debugfs_create_file("pm_genpd_summary", S_IRUGO, |
| pm_genpd_debugfs_dir, NULL, &pm_genpd_summary_fops); |
| if (!d) |
| return -ENOMEM; |
| |
| return 0; |
| } |
| late_initcall(pm_genpd_debug_init); |
| |
| static void __exit pm_genpd_debug_exit(void) |
| { |
| debugfs_remove_recursive(pm_genpd_debugfs_dir); |
| } |
| __exitcall(pm_genpd_debug_exit); |
| #endif /* CONFIG_PM_ADVANCED_DEBUG */ |