| /****************************************************************************** |
| * |
| * Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved. |
| * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of version 2 of the GNU General Public License as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License along with |
| * this program; if not, write to the Free Software Foundation, Inc., |
| * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA |
| * |
| * The full GNU General Public License is included in this distribution in the |
| * file called LICENSE. |
| * |
| * Contact Information: |
| * Intel Linux Wireless <linuxwifi@intel.com> |
| * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 |
| * |
| *****************************************************************************/ |
| #include <linux/kernel.h> |
| #include <linux/skbuff.h> |
| #include <linux/slab.h> |
| #include <net/mac80211.h> |
| |
| #include <linux/netdevice.h> |
| #include <linux/etherdevice.h> |
| #include <linux/delay.h> |
| |
| #include <linux/workqueue.h> |
| #include "rs.h" |
| #include "fw-api.h" |
| #include "sta.h" |
| #include "iwl-op-mode.h" |
| #include "mvm.h" |
| #include "debugfs.h" |
| |
| #define RS_NAME "iwl-mvm-rs" |
| |
| #define IWL_RATE_MAX_WINDOW 62 /* # tx in history window */ |
| |
| /* Calculations of success ratio are done in fixed point where 12800 is 100%. |
| * Use this macro when dealing with thresholds consts set as a percentage |
| */ |
| #define RS_PERCENT(x) (128 * x) |
| |
| static u8 rs_ht_to_legacy[] = { |
| [IWL_RATE_MCS_0_INDEX] = IWL_RATE_6M_INDEX, |
| [IWL_RATE_MCS_1_INDEX] = IWL_RATE_9M_INDEX, |
| [IWL_RATE_MCS_2_INDEX] = IWL_RATE_12M_INDEX, |
| [IWL_RATE_MCS_3_INDEX] = IWL_RATE_18M_INDEX, |
| [IWL_RATE_MCS_4_INDEX] = IWL_RATE_24M_INDEX, |
| [IWL_RATE_MCS_5_INDEX] = IWL_RATE_36M_INDEX, |
| [IWL_RATE_MCS_6_INDEX] = IWL_RATE_48M_INDEX, |
| [IWL_RATE_MCS_7_INDEX] = IWL_RATE_54M_INDEX, |
| [IWL_RATE_MCS_8_INDEX] = IWL_RATE_54M_INDEX, |
| [IWL_RATE_MCS_9_INDEX] = IWL_RATE_54M_INDEX, |
| }; |
| |
| static const u8 ant_toggle_lookup[] = { |
| [ANT_NONE] = ANT_NONE, |
| [ANT_A] = ANT_B, |
| [ANT_B] = ANT_C, |
| [ANT_AB] = ANT_BC, |
| [ANT_C] = ANT_A, |
| [ANT_AC] = ANT_AB, |
| [ANT_BC] = ANT_AC, |
| [ANT_ABC] = ANT_ABC, |
| }; |
| |
| #define IWL_DECLARE_RATE_INFO(r, s, rp, rn) \ |
| [IWL_RATE_##r##M_INDEX] = { IWL_RATE_##r##M_PLCP, \ |
| IWL_RATE_HT_SISO_MCS_##s##_PLCP, \ |
| IWL_RATE_HT_MIMO2_MCS_##s##_PLCP, \ |
| IWL_RATE_VHT_SISO_MCS_##s##_PLCP, \ |
| IWL_RATE_VHT_MIMO2_MCS_##s##_PLCP,\ |
| IWL_RATE_##rp##M_INDEX, \ |
| IWL_RATE_##rn##M_INDEX } |
| |
| #define IWL_DECLARE_MCS_RATE(s) \ |
| [IWL_RATE_MCS_##s##_INDEX] = { IWL_RATE_INVM_PLCP, \ |
| IWL_RATE_HT_SISO_MCS_##s##_PLCP, \ |
| IWL_RATE_HT_MIMO2_MCS_##s##_PLCP, \ |
| IWL_RATE_VHT_SISO_MCS_##s##_PLCP, \ |
| IWL_RATE_VHT_MIMO2_MCS_##s##_PLCP, \ |
| IWL_RATE_INVM_INDEX, \ |
| IWL_RATE_INVM_INDEX } |
| |
| /* |
| * Parameter order: |
| * rate, ht rate, prev rate, next rate |
| * |
| * If there isn't a valid next or previous rate then INV is used which |
| * maps to IWL_RATE_INVALID |
| * |
| */ |
| static const struct iwl_rs_rate_info iwl_rates[IWL_RATE_COUNT] = { |
| IWL_DECLARE_RATE_INFO(1, INV, INV, 2), /* 1mbps */ |
| IWL_DECLARE_RATE_INFO(2, INV, 1, 5), /* 2mbps */ |
| IWL_DECLARE_RATE_INFO(5, INV, 2, 11), /*5.5mbps */ |
| IWL_DECLARE_RATE_INFO(11, INV, 9, 12), /* 11mbps */ |
| IWL_DECLARE_RATE_INFO(6, 0, 5, 11), /* 6mbps ; MCS 0 */ |
| IWL_DECLARE_RATE_INFO(9, INV, 6, 11), /* 9mbps */ |
| IWL_DECLARE_RATE_INFO(12, 1, 11, 18), /* 12mbps ; MCS 1 */ |
| IWL_DECLARE_RATE_INFO(18, 2, 12, 24), /* 18mbps ; MCS 2 */ |
| IWL_DECLARE_RATE_INFO(24, 3, 18, 36), /* 24mbps ; MCS 3 */ |
| IWL_DECLARE_RATE_INFO(36, 4, 24, 48), /* 36mbps ; MCS 4 */ |
| IWL_DECLARE_RATE_INFO(48, 5, 36, 54), /* 48mbps ; MCS 5 */ |
| IWL_DECLARE_RATE_INFO(54, 6, 48, INV), /* 54mbps ; MCS 6 */ |
| IWL_DECLARE_MCS_RATE(7), /* MCS 7 */ |
| IWL_DECLARE_MCS_RATE(8), /* MCS 8 */ |
| IWL_DECLARE_MCS_RATE(9), /* MCS 9 */ |
| }; |
| |
| enum rs_action { |
| RS_ACTION_STAY = 0, |
| RS_ACTION_DOWNSCALE = -1, |
| RS_ACTION_UPSCALE = 1, |
| }; |
| |
| enum rs_column_mode { |
| RS_INVALID = 0, |
| RS_LEGACY, |
| RS_SISO, |
| RS_MIMO2, |
| }; |
| |
| #define MAX_NEXT_COLUMNS 7 |
| #define MAX_COLUMN_CHECKS 3 |
| |
| struct rs_tx_column; |
| |
| typedef bool (*allow_column_func_t) (struct iwl_mvm *mvm, |
| struct ieee80211_sta *sta, |
| struct rs_rate *rate, |
| const struct rs_tx_column *next_col); |
| |
| struct rs_tx_column { |
| enum rs_column_mode mode; |
| u8 ant; |
| bool sgi; |
| enum rs_column next_columns[MAX_NEXT_COLUMNS]; |
| allow_column_func_t checks[MAX_COLUMN_CHECKS]; |
| }; |
| |
| static bool rs_ant_allow(struct iwl_mvm *mvm, struct ieee80211_sta *sta, |
| struct rs_rate *rate, |
| const struct rs_tx_column *next_col) |
| { |
| return iwl_mvm_bt_coex_is_ant_avail(mvm, next_col->ant); |
| } |
| |
| static bool rs_mimo_allow(struct iwl_mvm *mvm, struct ieee80211_sta *sta, |
| struct rs_rate *rate, |
| const struct rs_tx_column *next_col) |
| { |
| struct iwl_mvm_sta *mvmsta; |
| struct iwl_mvm_vif *mvmvif; |
| |
| if (!sta->ht_cap.ht_supported) |
| return false; |
| |
| if (sta->smps_mode == IEEE80211_SMPS_STATIC) |
| return false; |
| |
| if (num_of_ant(iwl_mvm_get_valid_tx_ant(mvm)) < 2) |
| return false; |
| |
| if (!iwl_mvm_bt_coex_is_mimo_allowed(mvm, sta)) |
| return false; |
| |
| mvmsta = iwl_mvm_sta_from_mac80211(sta); |
| mvmvif = iwl_mvm_vif_from_mac80211(mvmsta->vif); |
| |
| if (mvm->nvm_data->sku_cap_mimo_disabled) |
| return false; |
| |
| return true; |
| } |
| |
| static bool rs_siso_allow(struct iwl_mvm *mvm, struct ieee80211_sta *sta, |
| struct rs_rate *rate, |
| const struct rs_tx_column *next_col) |
| { |
| if (!sta->ht_cap.ht_supported) |
| return false; |
| |
| return true; |
| } |
| |
| static bool rs_sgi_allow(struct iwl_mvm *mvm, struct ieee80211_sta *sta, |
| struct rs_rate *rate, |
| const struct rs_tx_column *next_col) |
| { |
| struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap; |
| struct ieee80211_sta_vht_cap *vht_cap = &sta->vht_cap; |
| |
| if (is_ht20(rate) && (ht_cap->cap & |
| IEEE80211_HT_CAP_SGI_20)) |
| return true; |
| if (is_ht40(rate) && (ht_cap->cap & |
| IEEE80211_HT_CAP_SGI_40)) |
| return true; |
| if (is_ht80(rate) && (vht_cap->cap & |
| IEEE80211_VHT_CAP_SHORT_GI_80)) |
| return true; |
| |
| return false; |
| } |
| |
| static const struct rs_tx_column rs_tx_columns[] = { |
| [RS_COLUMN_LEGACY_ANT_A] = { |
| .mode = RS_LEGACY, |
| .ant = ANT_A, |
| .next_columns = { |
| RS_COLUMN_LEGACY_ANT_B, |
| RS_COLUMN_SISO_ANT_A, |
| RS_COLUMN_MIMO2, |
| RS_COLUMN_INVALID, |
| RS_COLUMN_INVALID, |
| RS_COLUMN_INVALID, |
| RS_COLUMN_INVALID, |
| }, |
| .checks = { |
| rs_ant_allow, |
| }, |
| }, |
| [RS_COLUMN_LEGACY_ANT_B] = { |
| .mode = RS_LEGACY, |
| .ant = ANT_B, |
| .next_columns = { |
| RS_COLUMN_LEGACY_ANT_A, |
| RS_COLUMN_SISO_ANT_B, |
| RS_COLUMN_MIMO2, |
| RS_COLUMN_INVALID, |
| RS_COLUMN_INVALID, |
| RS_COLUMN_INVALID, |
| RS_COLUMN_INVALID, |
| }, |
| .checks = { |
| rs_ant_allow, |
| }, |
| }, |
| [RS_COLUMN_SISO_ANT_A] = { |
| .mode = RS_SISO, |
| .ant = ANT_A, |
| .next_columns = { |
| RS_COLUMN_SISO_ANT_B, |
| RS_COLUMN_MIMO2, |
| RS_COLUMN_SISO_ANT_A_SGI, |
| RS_COLUMN_LEGACY_ANT_A, |
| RS_COLUMN_LEGACY_ANT_B, |
| RS_COLUMN_INVALID, |
| RS_COLUMN_INVALID, |
| }, |
| .checks = { |
| rs_siso_allow, |
| rs_ant_allow, |
| }, |
| }, |
| [RS_COLUMN_SISO_ANT_B] = { |
| .mode = RS_SISO, |
| .ant = ANT_B, |
| .next_columns = { |
| RS_COLUMN_SISO_ANT_A, |
| RS_COLUMN_MIMO2, |
| RS_COLUMN_SISO_ANT_B_SGI, |
| RS_COLUMN_LEGACY_ANT_A, |
| RS_COLUMN_LEGACY_ANT_B, |
| RS_COLUMN_INVALID, |
| RS_COLUMN_INVALID, |
| }, |
| .checks = { |
| rs_siso_allow, |
| rs_ant_allow, |
| }, |
| }, |
| [RS_COLUMN_SISO_ANT_A_SGI] = { |
| .mode = RS_SISO, |
| .ant = ANT_A, |
| .sgi = true, |
| .next_columns = { |
| RS_COLUMN_SISO_ANT_B_SGI, |
| RS_COLUMN_MIMO2_SGI, |
| RS_COLUMN_SISO_ANT_A, |
| RS_COLUMN_LEGACY_ANT_A, |
| RS_COLUMN_LEGACY_ANT_B, |
| RS_COLUMN_INVALID, |
| RS_COLUMN_INVALID, |
| }, |
| .checks = { |
| rs_siso_allow, |
| rs_ant_allow, |
| rs_sgi_allow, |
| }, |
| }, |
| [RS_COLUMN_SISO_ANT_B_SGI] = { |
| .mode = RS_SISO, |
| .ant = ANT_B, |
| .sgi = true, |
| .next_columns = { |
| RS_COLUMN_SISO_ANT_A_SGI, |
| RS_COLUMN_MIMO2_SGI, |
| RS_COLUMN_SISO_ANT_B, |
| RS_COLUMN_LEGACY_ANT_A, |
| RS_COLUMN_LEGACY_ANT_B, |
| RS_COLUMN_INVALID, |
| RS_COLUMN_INVALID, |
| }, |
| .checks = { |
| rs_siso_allow, |
| rs_ant_allow, |
| rs_sgi_allow, |
| }, |
| }, |
| [RS_COLUMN_MIMO2] = { |
| .mode = RS_MIMO2, |
| .ant = ANT_AB, |
| .next_columns = { |
| RS_COLUMN_SISO_ANT_A, |
| RS_COLUMN_MIMO2_SGI, |
| RS_COLUMN_LEGACY_ANT_A, |
| RS_COLUMN_LEGACY_ANT_B, |
| RS_COLUMN_INVALID, |
| RS_COLUMN_INVALID, |
| RS_COLUMN_INVALID, |
| }, |
| .checks = { |
| rs_mimo_allow, |
| }, |
| }, |
| [RS_COLUMN_MIMO2_SGI] = { |
| .mode = RS_MIMO2, |
| .ant = ANT_AB, |
| .sgi = true, |
| .next_columns = { |
| RS_COLUMN_SISO_ANT_A_SGI, |
| RS_COLUMN_MIMO2, |
| RS_COLUMN_LEGACY_ANT_A, |
| RS_COLUMN_LEGACY_ANT_B, |
| RS_COLUMN_INVALID, |
| RS_COLUMN_INVALID, |
| RS_COLUMN_INVALID, |
| }, |
| .checks = { |
| rs_mimo_allow, |
| rs_sgi_allow, |
| }, |
| }, |
| }; |
| |
| static inline u8 rs_extract_rate(u32 rate_n_flags) |
| { |
| /* also works for HT because bits 7:6 are zero there */ |
| return (u8)(rate_n_flags & RATE_LEGACY_RATE_MSK); |
| } |
| |
| static int iwl_hwrate_to_plcp_idx(u32 rate_n_flags) |
| { |
| int idx = 0; |
| |
| if (rate_n_flags & RATE_MCS_HT_MSK) { |
| idx = rate_n_flags & RATE_HT_MCS_RATE_CODE_MSK; |
| idx += IWL_RATE_MCS_0_INDEX; |
| |
| /* skip 9M not supported in HT*/ |
| if (idx >= IWL_RATE_9M_INDEX) |
| idx += 1; |
| if ((idx >= IWL_FIRST_HT_RATE) && (idx <= IWL_LAST_HT_RATE)) |
| return idx; |
| } else if (rate_n_flags & RATE_MCS_VHT_MSK) { |
| idx = rate_n_flags & RATE_VHT_MCS_RATE_CODE_MSK; |
| idx += IWL_RATE_MCS_0_INDEX; |
| |
| /* skip 9M not supported in VHT*/ |
| if (idx >= IWL_RATE_9M_INDEX) |
| idx++; |
| if ((idx >= IWL_FIRST_VHT_RATE) && (idx <= IWL_LAST_VHT_RATE)) |
| return idx; |
| } else { |
| /* legacy rate format, search for match in table */ |
| |
| u8 legacy_rate = rs_extract_rate(rate_n_flags); |
| for (idx = 0; idx < ARRAY_SIZE(iwl_rates); idx++) |
| if (iwl_rates[idx].plcp == legacy_rate) |
| return idx; |
| } |
| |
| return IWL_RATE_INVALID; |
| } |
| |
| static void rs_rate_scale_perform(struct iwl_mvm *mvm, |
| struct ieee80211_sta *sta, |
| struct iwl_lq_sta *lq_sta, |
| int tid); |
| static void rs_fill_lq_cmd(struct iwl_mvm *mvm, |
| struct ieee80211_sta *sta, |
| struct iwl_lq_sta *lq_sta, |
| const struct rs_rate *initial_rate); |
| static void rs_stay_in_table(struct iwl_lq_sta *lq_sta, bool force_search); |
| |
| /** |
| * The following tables contain the expected throughput metrics for all rates |
| * |
| * 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54, 60 MBits |
| * |
| * where invalid entries are zeros. |
| * |
| * CCK rates are only valid in legacy table and will only be used in G |
| * (2.4 GHz) band. |
| */ |
| |
| static const u16 expected_tpt_legacy[IWL_RATE_COUNT] = { |
| 7, 13, 35, 58, 40, 57, 72, 98, 121, 154, 177, 186, 0, 0, 0 |
| }; |
| |
| /* Expected TpT tables. 4 indexes: |
| * 0 - NGI, 1 - SGI, 2 - AGG+NGI, 3 - AGG+SGI |
| */ |
| static const u16 expected_tpt_siso_20MHz[4][IWL_RATE_COUNT] = { |
| {0, 0, 0, 0, 42, 0, 76, 102, 124, 159, 183, 193, 202, 216, 0}, |
| {0, 0, 0, 0, 46, 0, 82, 110, 132, 168, 192, 202, 210, 225, 0}, |
| {0, 0, 0, 0, 49, 0, 97, 145, 192, 285, 375, 420, 464, 551, 0}, |
| {0, 0, 0, 0, 54, 0, 108, 160, 213, 315, 415, 465, 513, 608, 0}, |
| }; |
| |
| static const u16 expected_tpt_siso_40MHz[4][IWL_RATE_COUNT] = { |
| {0, 0, 0, 0, 77, 0, 127, 160, 184, 220, 242, 250, 257, 269, 275}, |
| {0, 0, 0, 0, 83, 0, 135, 169, 193, 229, 250, 257, 264, 275, 280}, |
| {0, 0, 0, 0, 101, 0, 199, 295, 389, 570, 744, 828, 911, 1070, 1173}, |
| {0, 0, 0, 0, 112, 0, 220, 326, 429, 629, 819, 912, 1000, 1173, 1284}, |
| }; |
| |
| static const u16 expected_tpt_siso_80MHz[4][IWL_RATE_COUNT] = { |
| {0, 0, 0, 0, 130, 0, 191, 223, 244, 273, 288, 294, 298, 305, 308}, |
| {0, 0, 0, 0, 138, 0, 200, 231, 251, 279, 293, 298, 302, 308, 312}, |
| {0, 0, 0, 0, 217, 0, 429, 634, 834, 1220, 1585, 1760, 1931, 2258, 2466}, |
| {0, 0, 0, 0, 241, 0, 475, 701, 921, 1343, 1741, 1931, 2117, 2468, 2691}, |
| }; |
| |
| static const u16 expected_tpt_mimo2_20MHz[4][IWL_RATE_COUNT] = { |
| {0, 0, 0, 0, 74, 0, 123, 155, 179, 213, 235, 243, 250, 261, 0}, |
| {0, 0, 0, 0, 81, 0, 131, 164, 187, 221, 242, 250, 256, 267, 0}, |
| {0, 0, 0, 0, 98, 0, 193, 286, 375, 550, 718, 799, 878, 1032, 0}, |
| {0, 0, 0, 0, 109, 0, 214, 316, 414, 607, 790, 879, 965, 1132, 0}, |
| }; |
| |
| static const u16 expected_tpt_mimo2_40MHz[4][IWL_RATE_COUNT] = { |
| {0, 0, 0, 0, 123, 0, 182, 214, 235, 264, 279, 285, 289, 296, 300}, |
| {0, 0, 0, 0, 131, 0, 191, 222, 242, 270, 284, 289, 293, 300, 303}, |
| {0, 0, 0, 0, 200, 0, 390, 571, 741, 1067, 1365, 1505, 1640, 1894, 2053}, |
| {0, 0, 0, 0, 221, 0, 430, 630, 816, 1169, 1490, 1641, 1784, 2053, 2221}, |
| }; |
| |
| static const u16 expected_tpt_mimo2_80MHz[4][IWL_RATE_COUNT] = { |
| {0, 0, 0, 0, 182, 0, 240, 264, 278, 299, 308, 311, 313, 317, 319}, |
| {0, 0, 0, 0, 190, 0, 247, 269, 282, 302, 310, 313, 315, 319, 320}, |
| {0, 0, 0, 0, 428, 0, 833, 1215, 1577, 2254, 2863, 3147, 3418, 3913, 4219}, |
| {0, 0, 0, 0, 474, 0, 920, 1338, 1732, 2464, 3116, 3418, 3705, 4225, 4545}, |
| }; |
| |
| /* mbps, mcs */ |
| static const struct iwl_rate_mcs_info iwl_rate_mcs[IWL_RATE_COUNT] = { |
| { "1", "BPSK DSSS"}, |
| { "2", "QPSK DSSS"}, |
| {"5.5", "BPSK CCK"}, |
| { "11", "QPSK CCK"}, |
| { "6", "BPSK 1/2"}, |
| { "9", "BPSK 1/2"}, |
| { "12", "QPSK 1/2"}, |
| { "18", "QPSK 3/4"}, |
| { "24", "16QAM 1/2"}, |
| { "36", "16QAM 3/4"}, |
| { "48", "64QAM 2/3"}, |
| { "54", "64QAM 3/4"}, |
| { "60", "64QAM 5/6"}, |
| }; |
| |
| #define MCS_INDEX_PER_STREAM (8) |
| |
| static const char *rs_pretty_ant(u8 ant) |
| { |
| static const char * const ant_name[] = { |
| [ANT_NONE] = "None", |
| [ANT_A] = "A", |
| [ANT_B] = "B", |
| [ANT_AB] = "AB", |
| [ANT_C] = "C", |
| [ANT_AC] = "AC", |
| [ANT_BC] = "BC", |
| [ANT_ABC] = "ABC", |
| }; |
| |
| if (ant > ANT_ABC) |
| return "UNKNOWN"; |
| |
| return ant_name[ant]; |
| } |
| |
| static const char *rs_pretty_lq_type(enum iwl_table_type type) |
| { |
| static const char * const lq_types[] = { |
| [LQ_NONE] = "NONE", |
| [LQ_LEGACY_A] = "LEGACY_A", |
| [LQ_LEGACY_G] = "LEGACY_G", |
| [LQ_HT_SISO] = "HT SISO", |
| [LQ_HT_MIMO2] = "HT MIMO", |
| [LQ_VHT_SISO] = "VHT SISO", |
| [LQ_VHT_MIMO2] = "VHT MIMO", |
| }; |
| |
| if (type < LQ_NONE || type >= LQ_MAX) |
| return "UNKNOWN"; |
| |
| return lq_types[type]; |
| } |
| |
| static char *rs_pretty_rate(const struct rs_rate *rate) |
| { |
| static char buf[40]; |
| static const char * const legacy_rates[] = { |
| [IWL_RATE_1M_INDEX] = "1M", |
| [IWL_RATE_2M_INDEX] = "2M", |
| [IWL_RATE_5M_INDEX] = "5.5M", |
| [IWL_RATE_11M_INDEX] = "11M", |
| [IWL_RATE_6M_INDEX] = "6M", |
| [IWL_RATE_9M_INDEX] = "9M", |
| [IWL_RATE_12M_INDEX] = "12M", |
| [IWL_RATE_18M_INDEX] = "18M", |
| [IWL_RATE_24M_INDEX] = "24M", |
| [IWL_RATE_36M_INDEX] = "36M", |
| [IWL_RATE_48M_INDEX] = "48M", |
| [IWL_RATE_54M_INDEX] = "54M", |
| }; |
| static const char *const ht_vht_rates[] = { |
| [IWL_RATE_MCS_0_INDEX] = "MCS0", |
| [IWL_RATE_MCS_1_INDEX] = "MCS1", |
| [IWL_RATE_MCS_2_INDEX] = "MCS2", |
| [IWL_RATE_MCS_3_INDEX] = "MCS3", |
| [IWL_RATE_MCS_4_INDEX] = "MCS4", |
| [IWL_RATE_MCS_5_INDEX] = "MCS5", |
| [IWL_RATE_MCS_6_INDEX] = "MCS6", |
| [IWL_RATE_MCS_7_INDEX] = "MCS7", |
| [IWL_RATE_MCS_8_INDEX] = "MCS8", |
| [IWL_RATE_MCS_9_INDEX] = "MCS9", |
| }; |
| const char *rate_str; |
| |
| if (is_type_legacy(rate->type) && (rate->index <= IWL_RATE_54M_INDEX)) |
| rate_str = legacy_rates[rate->index]; |
| else if ((is_type_ht(rate->type) || is_type_vht(rate->type)) && |
| (rate->index <= IWL_RATE_MCS_9_INDEX)) |
| rate_str = ht_vht_rates[rate->index]; |
| else |
| rate_str = "BAD_RATE"; |
| |
| sprintf(buf, "(%s|%s|%s)", rs_pretty_lq_type(rate->type), |
| rs_pretty_ant(rate->ant), rate_str); |
| return buf; |
| } |
| |
| static inline void rs_dump_rate(struct iwl_mvm *mvm, const struct rs_rate *rate, |
| const char *prefix) |
| { |
| IWL_DEBUG_RATE(mvm, |
| "%s: %s BW: %d SGI: %d LDPC: %d STBC: %d\n", |
| prefix, rs_pretty_rate(rate), rate->bw, |
| rate->sgi, rate->ldpc, rate->stbc); |
| } |
| |
| static void rs_rate_scale_clear_window(struct iwl_rate_scale_data *window) |
| { |
| window->data = 0; |
| window->success_counter = 0; |
| window->success_ratio = IWL_INVALID_VALUE; |
| window->counter = 0; |
| window->average_tpt = IWL_INVALID_VALUE; |
| } |
| |
| static void rs_rate_scale_clear_tbl_windows(struct iwl_mvm *mvm, |
| struct iwl_scale_tbl_info *tbl) |
| { |
| int i; |
| |
| IWL_DEBUG_RATE(mvm, "Clearing up window stats\n"); |
| for (i = 0; i < IWL_RATE_COUNT; i++) |
| rs_rate_scale_clear_window(&tbl->win[i]); |
| |
| for (i = 0; i < ARRAY_SIZE(tbl->tpc_win); i++) |
| rs_rate_scale_clear_window(&tbl->tpc_win[i]); |
| } |
| |
| static inline u8 rs_is_valid_ant(u8 valid_antenna, u8 ant_type) |
| { |
| return (ant_type & valid_antenna) == ant_type; |
| } |
| |
| static int rs_tl_turn_on_agg_for_tid(struct iwl_mvm *mvm, |
| struct iwl_lq_sta *lq_data, u8 tid, |
| struct ieee80211_sta *sta) |
| { |
| int ret = -EAGAIN; |
| |
| IWL_DEBUG_HT(mvm, "Starting Tx agg: STA: %pM tid: %d\n", |
| sta->addr, tid); |
| ret = ieee80211_start_tx_ba_session(sta, tid, 5000); |
| if (ret == -EAGAIN) { |
| /* |
| * driver and mac80211 is out of sync |
| * this might be cause by reloading firmware |
| * stop the tx ba session here |
| */ |
| IWL_ERR(mvm, "Fail start Tx agg on tid: %d\n", |
| tid); |
| ieee80211_stop_tx_ba_session(sta, tid); |
| } |
| return ret; |
| } |
| |
| static void rs_tl_turn_on_agg(struct iwl_mvm *mvm, u8 tid, |
| struct iwl_lq_sta *lq_data, |
| struct ieee80211_sta *sta) |
| { |
| if (tid < IWL_MAX_TID_COUNT) |
| rs_tl_turn_on_agg_for_tid(mvm, lq_data, tid, sta); |
| else |
| IWL_ERR(mvm, "tid exceeds max TID count: %d/%d\n", |
| tid, IWL_MAX_TID_COUNT); |
| } |
| |
| static inline int get_num_of_ant_from_rate(u32 rate_n_flags) |
| { |
| return !!(rate_n_flags & RATE_MCS_ANT_A_MSK) + |
| !!(rate_n_flags & RATE_MCS_ANT_B_MSK) + |
| !!(rate_n_flags & RATE_MCS_ANT_C_MSK); |
| } |
| |
| /* |
| * Static function to get the expected throughput from an iwl_scale_tbl_info |
| * that wraps a NULL pointer check |
| */ |
| static s32 get_expected_tpt(struct iwl_scale_tbl_info *tbl, int rs_index) |
| { |
| if (tbl->expected_tpt) |
| return tbl->expected_tpt[rs_index]; |
| return 0; |
| } |
| |
| /** |
| * rs_collect_tx_data - Update the success/failure sliding window |
| * |
| * We keep a sliding window of the last 62 packets transmitted |
| * at this rate. window->data contains the bitmask of successful |
| * packets. |
| */ |
| static int _rs_collect_tx_data(struct iwl_mvm *mvm, |
| struct iwl_scale_tbl_info *tbl, |
| int scale_index, int attempts, int successes, |
| struct iwl_rate_scale_data *window) |
| { |
| static const u64 mask = (((u64)1) << (IWL_RATE_MAX_WINDOW - 1)); |
| s32 fail_count, tpt; |
| |
| /* Get expected throughput */ |
| tpt = get_expected_tpt(tbl, scale_index); |
| |
| /* |
| * Keep track of only the latest 62 tx frame attempts in this rate's |
| * history window; anything older isn't really relevant any more. |
| * If we have filled up the sliding window, drop the oldest attempt; |
| * if the oldest attempt (highest bit in bitmap) shows "success", |
| * subtract "1" from the success counter (this is the main reason |
| * we keep these bitmaps!). |
| */ |
| while (attempts > 0) { |
| if (window->counter >= IWL_RATE_MAX_WINDOW) { |
| /* remove earliest */ |
| window->counter = IWL_RATE_MAX_WINDOW - 1; |
| |
| if (window->data & mask) { |
| window->data &= ~mask; |
| window->success_counter--; |
| } |
| } |
| |
| /* Increment frames-attempted counter */ |
| window->counter++; |
| |
| /* Shift bitmap by one frame to throw away oldest history */ |
| window->data <<= 1; |
| |
| /* Mark the most recent #successes attempts as successful */ |
| if (successes > 0) { |
| window->success_counter++; |
| window->data |= 0x1; |
| successes--; |
| } |
| |
| attempts--; |
| } |
| |
| /* Calculate current success ratio, avoid divide-by-0! */ |
| if (window->counter > 0) |
| window->success_ratio = 128 * (100 * window->success_counter) |
| / window->counter; |
| else |
| window->success_ratio = IWL_INVALID_VALUE; |
| |
| fail_count = window->counter - window->success_counter; |
| |
| /* Calculate average throughput, if we have enough history. */ |
| if ((fail_count >= IWL_MVM_RS_RATE_MIN_FAILURE_TH) || |
| (window->success_counter >= IWL_MVM_RS_RATE_MIN_SUCCESS_TH)) |
| window->average_tpt = (window->success_ratio * tpt + 64) / 128; |
| else |
| window->average_tpt = IWL_INVALID_VALUE; |
| |
| return 0; |
| } |
| |
| static int rs_collect_tx_data(struct iwl_mvm *mvm, |
| struct iwl_lq_sta *lq_sta, |
| struct iwl_scale_tbl_info *tbl, |
| int scale_index, int attempts, int successes, |
| u8 reduced_txp) |
| { |
| struct iwl_rate_scale_data *window = NULL; |
| int ret; |
| |
| if (scale_index < 0 || scale_index >= IWL_RATE_COUNT) |
| return -EINVAL; |
| |
| if (tbl->column != RS_COLUMN_INVALID) { |
| struct lq_sta_pers *pers = &lq_sta->pers; |
| |
| pers->tx_stats[tbl->column][scale_index].total += attempts; |
| pers->tx_stats[tbl->column][scale_index].success += successes; |
| } |
| |
| /* Select window for current tx bit rate */ |
| window = &(tbl->win[scale_index]); |
| |
| ret = _rs_collect_tx_data(mvm, tbl, scale_index, attempts, successes, |
| window); |
| if (ret) |
| return ret; |
| |
| if (WARN_ON_ONCE(reduced_txp > TPC_MAX_REDUCTION)) |
| return -EINVAL; |
| |
| window = &tbl->tpc_win[reduced_txp]; |
| return _rs_collect_tx_data(mvm, tbl, scale_index, attempts, successes, |
| window); |
| } |
| |
| /* Convert rs_rate object into ucode rate bitmask */ |
| static u32 ucode_rate_from_rs_rate(struct iwl_mvm *mvm, |
| struct rs_rate *rate) |
| { |
| u32 ucode_rate = 0; |
| int index = rate->index; |
| |
| ucode_rate |= ((rate->ant << RATE_MCS_ANT_POS) & |
| RATE_MCS_ANT_ABC_MSK); |
| |
| if (is_legacy(rate)) { |
| ucode_rate |= iwl_rates[index].plcp; |
| if (index >= IWL_FIRST_CCK_RATE && index <= IWL_LAST_CCK_RATE) |
| ucode_rate |= RATE_MCS_CCK_MSK; |
| return ucode_rate; |
| } |
| |
| if (is_ht(rate)) { |
| if (index < IWL_FIRST_HT_RATE || index > IWL_LAST_HT_RATE) { |
| IWL_ERR(mvm, "Invalid HT rate index %d\n", index); |
| index = IWL_LAST_HT_RATE; |
| } |
| ucode_rate |= RATE_MCS_HT_MSK; |
| |
| if (is_ht_siso(rate)) |
| ucode_rate |= iwl_rates[index].plcp_ht_siso; |
| else if (is_ht_mimo2(rate)) |
| ucode_rate |= iwl_rates[index].plcp_ht_mimo2; |
| else |
| WARN_ON_ONCE(1); |
| } else if (is_vht(rate)) { |
| if (index < IWL_FIRST_VHT_RATE || index > IWL_LAST_VHT_RATE) { |
| IWL_ERR(mvm, "Invalid VHT rate index %d\n", index); |
| index = IWL_LAST_VHT_RATE; |
| } |
| ucode_rate |= RATE_MCS_VHT_MSK; |
| if (is_vht_siso(rate)) |
| ucode_rate |= iwl_rates[index].plcp_vht_siso; |
| else if (is_vht_mimo2(rate)) |
| ucode_rate |= iwl_rates[index].plcp_vht_mimo2; |
| else |
| WARN_ON_ONCE(1); |
| |
| } else { |
| IWL_ERR(mvm, "Invalid rate->type %d\n", rate->type); |
| } |
| |
| if (is_siso(rate) && rate->stbc) { |
| /* To enable STBC we need to set both a flag and ANT_AB */ |
| ucode_rate |= RATE_MCS_ANT_AB_MSK; |
| ucode_rate |= RATE_MCS_VHT_STBC_MSK; |
| } |
| |
| ucode_rate |= rate->bw; |
| if (rate->sgi) |
| ucode_rate |= RATE_MCS_SGI_MSK; |
| if (rate->ldpc) |
| ucode_rate |= RATE_MCS_LDPC_MSK; |
| |
| return ucode_rate; |
| } |
| |
| /* Convert a ucode rate into an rs_rate object */ |
| static int rs_rate_from_ucode_rate(const u32 ucode_rate, |
| enum ieee80211_band band, |
| struct rs_rate *rate) |
| { |
| u32 ant_msk = ucode_rate & RATE_MCS_ANT_ABC_MSK; |
| u8 num_of_ant = get_num_of_ant_from_rate(ucode_rate); |
| u8 nss; |
| |
| memset(rate, 0, sizeof(*rate)); |
| rate->index = iwl_hwrate_to_plcp_idx(ucode_rate); |
| |
| if (rate->index == IWL_RATE_INVALID) |
| return -EINVAL; |
| |
| rate->ant = (ant_msk >> RATE_MCS_ANT_POS); |
| |
| /* Legacy */ |
| if (!(ucode_rate & RATE_MCS_HT_MSK) && |
| !(ucode_rate & RATE_MCS_VHT_MSK)) { |
| if (num_of_ant == 1) { |
| if (band == IEEE80211_BAND_5GHZ) |
| rate->type = LQ_LEGACY_A; |
| else |
| rate->type = LQ_LEGACY_G; |
| } |
| |
| return 0; |
| } |
| |
| /* HT or VHT */ |
| if (ucode_rate & RATE_MCS_SGI_MSK) |
| rate->sgi = true; |
| if (ucode_rate & RATE_MCS_LDPC_MSK) |
| rate->ldpc = true; |
| if (ucode_rate & RATE_MCS_VHT_STBC_MSK) |
| rate->stbc = true; |
| if (ucode_rate & RATE_MCS_BF_MSK) |
| rate->bfer = true; |
| |
| rate->bw = ucode_rate & RATE_MCS_CHAN_WIDTH_MSK; |
| |
| if (ucode_rate & RATE_MCS_HT_MSK) { |
| nss = ((ucode_rate & RATE_HT_MCS_NSS_MSK) >> |
| RATE_HT_MCS_NSS_POS) + 1; |
| |
| if (nss == 1) { |
| rate->type = LQ_HT_SISO; |
| WARN_ONCE(!rate->stbc && !rate->bfer && num_of_ant != 1, |
| "stbc %d bfer %d", |
| rate->stbc, rate->bfer); |
| } else if (nss == 2) { |
| rate->type = LQ_HT_MIMO2; |
| WARN_ON_ONCE(num_of_ant != 2); |
| } else { |
| WARN_ON_ONCE(1); |
| } |
| } else if (ucode_rate & RATE_MCS_VHT_MSK) { |
| nss = ((ucode_rate & RATE_VHT_MCS_NSS_MSK) >> |
| RATE_VHT_MCS_NSS_POS) + 1; |
| |
| if (nss == 1) { |
| rate->type = LQ_VHT_SISO; |
| WARN_ONCE(!rate->stbc && !rate->bfer && num_of_ant != 1, |
| "stbc %d bfer %d", |
| rate->stbc, rate->bfer); |
| } else if (nss == 2) { |
| rate->type = LQ_VHT_MIMO2; |
| WARN_ON_ONCE(num_of_ant != 2); |
| } else { |
| WARN_ON_ONCE(1); |
| } |
| } |
| |
| WARN_ON_ONCE(rate->bw == RATE_MCS_CHAN_WIDTH_160); |
| WARN_ON_ONCE(rate->bw == RATE_MCS_CHAN_WIDTH_80 && |
| !is_vht(rate)); |
| |
| return 0; |
| } |
| |
| /* switch to another antenna/antennas and return 1 */ |
| /* if no other valid antenna found, return 0 */ |
| static int rs_toggle_antenna(u32 valid_ant, struct rs_rate *rate) |
| { |
| u8 new_ant_type; |
| |
| if (!rate->ant || rate->ant > ANT_ABC) |
| return 0; |
| |
| if (!rs_is_valid_ant(valid_ant, rate->ant)) |
| return 0; |
| |
| new_ant_type = ant_toggle_lookup[rate->ant]; |
| |
| while ((new_ant_type != rate->ant) && |
| !rs_is_valid_ant(valid_ant, new_ant_type)) |
| new_ant_type = ant_toggle_lookup[new_ant_type]; |
| |
| if (new_ant_type == rate->ant) |
| return 0; |
| |
| rate->ant = new_ant_type; |
| |
| return 1; |
| } |
| |
| static u16 rs_get_supported_rates(struct iwl_lq_sta *lq_sta, |
| struct rs_rate *rate) |
| { |
| if (is_legacy(rate)) |
| return lq_sta->active_legacy_rate; |
| else if (is_siso(rate)) |
| return lq_sta->active_siso_rate; |
| else if (is_mimo2(rate)) |
| return lq_sta->active_mimo2_rate; |
| |
| WARN_ON_ONCE(1); |
| return 0; |
| } |
| |
| static u16 rs_get_adjacent_rate(struct iwl_mvm *mvm, u8 index, u16 rate_mask, |
| int rate_type) |
| { |
| u8 high = IWL_RATE_INVALID; |
| u8 low = IWL_RATE_INVALID; |
| |
| /* 802.11A or ht walks to the next literal adjacent rate in |
| * the rate table */ |
| if (is_type_a_band(rate_type) || !is_type_legacy(rate_type)) { |
| int i; |
| u32 mask; |
| |
| /* Find the previous rate that is in the rate mask */ |
| i = index - 1; |
| for (mask = (1 << i); i >= 0; i--, mask >>= 1) { |
| if (rate_mask & mask) { |
| low = i; |
| break; |
| } |
| } |
| |
| /* Find the next rate that is in the rate mask */ |
| i = index + 1; |
| for (mask = (1 << i); i < IWL_RATE_COUNT; i++, mask <<= 1) { |
| if (rate_mask & mask) { |
| high = i; |
| break; |
| } |
| } |
| |
| return (high << 8) | low; |
| } |
| |
| low = index; |
| while (low != IWL_RATE_INVALID) { |
| low = iwl_rates[low].prev_rs; |
| if (low == IWL_RATE_INVALID) |
| break; |
| if (rate_mask & (1 << low)) |
| break; |
| } |
| |
| high = index; |
| while (high != IWL_RATE_INVALID) { |
| high = iwl_rates[high].next_rs; |
| if (high == IWL_RATE_INVALID) |
| break; |
| if (rate_mask & (1 << high)) |
| break; |
| } |
| |
| return (high << 8) | low; |
| } |
| |
| static inline bool rs_rate_supported(struct iwl_lq_sta *lq_sta, |
| struct rs_rate *rate) |
| { |
| return BIT(rate->index) & rs_get_supported_rates(lq_sta, rate); |
| } |
| |
| /* Get the next supported lower rate in the current column. |
| * Return true if bottom rate in the current column was reached |
| */ |
| static bool rs_get_lower_rate_in_column(struct iwl_lq_sta *lq_sta, |
| struct rs_rate *rate) |
| { |
| u8 low; |
| u16 high_low; |
| u16 rate_mask; |
| struct iwl_mvm *mvm = lq_sta->pers.drv; |
| |
| rate_mask = rs_get_supported_rates(lq_sta, rate); |
| high_low = rs_get_adjacent_rate(mvm, rate->index, rate_mask, |
| rate->type); |
| low = high_low & 0xff; |
| |
| /* Bottom rate of column reached */ |
| if (low == IWL_RATE_INVALID) |
| return true; |
| |
| rate->index = low; |
| return false; |
| } |
| |
| /* Get the next rate to use following a column downgrade */ |
| static void rs_get_lower_rate_down_column(struct iwl_lq_sta *lq_sta, |
| struct rs_rate *rate) |
| { |
| struct iwl_mvm *mvm = lq_sta->pers.drv; |
| |
| if (is_legacy(rate)) { |
| /* No column to downgrade from Legacy */ |
| return; |
| } else if (is_siso(rate)) { |
| /* Downgrade to Legacy if we were in SISO */ |
| if (lq_sta->band == IEEE80211_BAND_5GHZ) |
| rate->type = LQ_LEGACY_A; |
| else |
| rate->type = LQ_LEGACY_G; |
| |
| rate->bw = RATE_MCS_CHAN_WIDTH_20; |
| |
| WARN_ON_ONCE(rate->index < IWL_RATE_MCS_0_INDEX || |
| rate->index > IWL_RATE_MCS_9_INDEX); |
| |
| rate->index = rs_ht_to_legacy[rate->index]; |
| rate->ldpc = false; |
| } else { |
| /* Downgrade to SISO with same MCS if in MIMO */ |
| rate->type = is_vht_mimo2(rate) ? |
| LQ_VHT_SISO : LQ_HT_SISO; |
| } |
| |
| if (num_of_ant(rate->ant) > 1) |
| rate->ant = first_antenna(iwl_mvm_get_valid_tx_ant(mvm)); |
| |
| /* Relevant in both switching to SISO or Legacy */ |
| rate->sgi = false; |
| |
| if (!rs_rate_supported(lq_sta, rate)) |
| rs_get_lower_rate_in_column(lq_sta, rate); |
| } |
| |
| /* Check if both rates are identical |
| * allow_ant_mismatch enables matching a SISO rate on ANT_A or ANT_B |
| * with a rate indicating STBC/BFER and ANT_AB. |
| */ |
| static inline bool rs_rate_equal(struct rs_rate *a, |
| struct rs_rate *b, |
| bool allow_ant_mismatch) |
| |
| { |
| bool ant_match = (a->ant == b->ant) && (a->stbc == b->stbc) && |
| (a->bfer == b->bfer); |
| |
| if (allow_ant_mismatch) { |
| if (a->stbc || a->bfer) { |
| WARN_ONCE(a->ant != ANT_AB, "stbc %d bfer %d ant %d", |
| a->stbc, a->bfer, a->ant); |
| ant_match |= (b->ant == ANT_A || b->ant == ANT_B); |
| } else if (b->stbc || b->bfer) { |
| WARN_ONCE(b->ant != ANT_AB, "stbc %d bfer %d ant %d", |
| b->stbc, b->bfer, b->ant); |
| ant_match |= (a->ant == ANT_A || a->ant == ANT_B); |
| } |
| } |
| |
| return (a->type == b->type) && (a->bw == b->bw) && (a->sgi == b->sgi) && |
| (a->ldpc == b->ldpc) && (a->index == b->index) && ant_match; |
| } |
| |
| /* Check if both rates share the same column */ |
| static inline bool rs_rate_column_match(struct rs_rate *a, |
| struct rs_rate *b) |
| { |
| bool ant_match; |
| |
| if (a->stbc || a->bfer) |
| ant_match = (b->ant == ANT_A || b->ant == ANT_B); |
| else |
| ant_match = (a->ant == b->ant); |
| |
| return (a->type == b->type) && (a->bw == b->bw) && (a->sgi == b->sgi) |
| && ant_match; |
| } |
| |
| static inline enum rs_column rs_get_column_from_rate(struct rs_rate *rate) |
| { |
| if (is_legacy(rate)) { |
| if (rate->ant == ANT_A) |
| return RS_COLUMN_LEGACY_ANT_A; |
| |
| if (rate->ant == ANT_B) |
| return RS_COLUMN_LEGACY_ANT_B; |
| |
| goto err; |
| } |
| |
| if (is_siso(rate)) { |
| if (rate->ant == ANT_A || rate->stbc || rate->bfer) |
| return rate->sgi ? RS_COLUMN_SISO_ANT_A_SGI : |
| RS_COLUMN_SISO_ANT_A; |
| |
| if (rate->ant == ANT_B) |
| return rate->sgi ? RS_COLUMN_SISO_ANT_B_SGI : |
| RS_COLUMN_SISO_ANT_B; |
| |
| goto err; |
| } |
| |
| if (is_mimo(rate)) |
| return rate->sgi ? RS_COLUMN_MIMO2_SGI : RS_COLUMN_MIMO2; |
| |
| err: |
| return RS_COLUMN_INVALID; |
| } |
| |
| static u8 rs_get_tid(struct ieee80211_hdr *hdr) |
| { |
| u8 tid = IWL_MAX_TID_COUNT; |
| |
| if (ieee80211_is_data_qos(hdr->frame_control)) { |
| u8 *qc = ieee80211_get_qos_ctl(hdr); |
| tid = qc[0] & 0xf; |
| } |
| |
| if (unlikely(tid > IWL_MAX_TID_COUNT)) |
| tid = IWL_MAX_TID_COUNT; |
| |
| return tid; |
| } |
| |
| void iwl_mvm_rs_tx_status(struct iwl_mvm *mvm, struct ieee80211_sta *sta, |
| int tid, struct ieee80211_tx_info *info) |
| { |
| int legacy_success; |
| int retries; |
| int i; |
| struct iwl_lq_cmd *table; |
| u32 lq_hwrate; |
| struct rs_rate lq_rate, tx_resp_rate; |
| struct iwl_scale_tbl_info *curr_tbl, *other_tbl, *tmp_tbl; |
| u8 reduced_txp = (uintptr_t)info->status.status_driver_data[0]; |
| u32 tx_resp_hwrate = (uintptr_t)info->status.status_driver_data[1]; |
| struct iwl_mvm_sta *mvmsta = iwl_mvm_sta_from_mac80211(sta); |
| struct iwl_lq_sta *lq_sta = &mvmsta->lq_sta; |
| bool allow_ant_mismatch = fw_has_api(&mvm->fw->ucode_capa, |
| IWL_UCODE_TLV_API_LQ_SS_PARAMS); |
| |
| /* Treat uninitialized rate scaling data same as non-existing. */ |
| if (!lq_sta) { |
| IWL_DEBUG_RATE(mvm, "Station rate scaling not created yet.\n"); |
| return; |
| } else if (!lq_sta->pers.drv) { |
| IWL_DEBUG_RATE(mvm, "Rate scaling not initialized yet.\n"); |
| return; |
| } |
| |
| /* This packet was aggregated but doesn't carry status info */ |
| if ((info->flags & IEEE80211_TX_CTL_AMPDU) && |
| !(info->flags & IEEE80211_TX_STAT_AMPDU)) |
| return; |
| |
| rs_rate_from_ucode_rate(tx_resp_hwrate, info->band, &tx_resp_rate); |
| |
| #ifdef CONFIG_MAC80211_DEBUGFS |
| /* Disable last tx check if we are debugging with fixed rate but |
| * update tx stats */ |
| if (lq_sta->pers.dbg_fixed_rate) { |
| int index = tx_resp_rate.index; |
| enum rs_column column; |
| int attempts, success; |
| |
| column = rs_get_column_from_rate(&tx_resp_rate); |
| if (WARN_ONCE(column == RS_COLUMN_INVALID, |
| "Can't map rate 0x%x to column", |
| tx_resp_hwrate)) |
| return; |
| |
| if (info->flags & IEEE80211_TX_STAT_AMPDU) { |
| attempts = info->status.ampdu_len; |
| success = info->status.ampdu_ack_len; |
| } else { |
| attempts = info->status.rates[0].count; |
| success = !!(info->flags & IEEE80211_TX_STAT_ACK); |
| } |
| |
| lq_sta->pers.tx_stats[column][index].total += attempts; |
| lq_sta->pers.tx_stats[column][index].success += success; |
| |
| IWL_DEBUG_RATE(mvm, "Fixed rate 0x%x success %d attempts %d\n", |
| tx_resp_hwrate, success, attempts); |
| return; |
| } |
| #endif |
| |
| if (time_after(jiffies, |
| (unsigned long)(lq_sta->last_tx + |
| (IWL_MVM_RS_IDLE_TIMEOUT * HZ)))) { |
| int t; |
| |
| IWL_DEBUG_RATE(mvm, "Tx idle for too long. reinit rs\n"); |
| for (t = 0; t < IWL_MAX_TID_COUNT; t++) |
| ieee80211_stop_tx_ba_session(sta, t); |
| |
| iwl_mvm_rs_rate_init(mvm, sta, info->band, false); |
| return; |
| } |
| lq_sta->last_tx = jiffies; |
| |
| /* Ignore this Tx frame response if its initial rate doesn't match |
| * that of latest Link Quality command. There may be stragglers |
| * from a previous Link Quality command, but we're no longer interested |
| * in those; they're either from the "active" mode while we're trying |
| * to check "search" mode, or a prior "search" mode after we've moved |
| * to a new "search" mode (which might become the new "active" mode). |
| */ |
| table = &lq_sta->lq; |
| lq_hwrate = le32_to_cpu(table->rs_table[0]); |
| rs_rate_from_ucode_rate(lq_hwrate, info->band, &lq_rate); |
| |
| /* Here we actually compare this rate to the latest LQ command */ |
| if (!rs_rate_equal(&tx_resp_rate, &lq_rate, allow_ant_mismatch)) { |
| IWL_DEBUG_RATE(mvm, |
| "initial tx resp rate 0x%x does not match 0x%x\n", |
| tx_resp_hwrate, lq_hwrate); |
| |
| /* |
| * Since rates mis-match, the last LQ command may have failed. |
| * After IWL_MISSED_RATE_MAX mis-matches, resync the uCode with |
| * ... driver. |
| */ |
| lq_sta->missed_rate_counter++; |
| if (lq_sta->missed_rate_counter > IWL_MVM_RS_MISSED_RATE_MAX) { |
| lq_sta->missed_rate_counter = 0; |
| IWL_DEBUG_RATE(mvm, |
| "Too many rates mismatch. Send sync LQ. rs_state %d\n", |
| lq_sta->rs_state); |
| iwl_mvm_send_lq_cmd(mvm, &lq_sta->lq, false); |
| } |
| /* Regardless, ignore this status info for outdated rate */ |
| return; |
| } else |
| /* Rate did match, so reset the missed_rate_counter */ |
| lq_sta->missed_rate_counter = 0; |
| |
| if (!lq_sta->search_better_tbl) { |
| curr_tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); |
| other_tbl = &(lq_sta->lq_info[1 - lq_sta->active_tbl]); |
| } else { |
| curr_tbl = &(lq_sta->lq_info[1 - lq_sta->active_tbl]); |
| other_tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); |
| } |
| |
| if (WARN_ON_ONCE(!rs_rate_column_match(&lq_rate, &curr_tbl->rate))) { |
| IWL_DEBUG_RATE(mvm, |
| "Neither active nor search matches tx rate\n"); |
| tmp_tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); |
| rs_dump_rate(mvm, &tmp_tbl->rate, "ACTIVE"); |
| tmp_tbl = &(lq_sta->lq_info[1 - lq_sta->active_tbl]); |
| rs_dump_rate(mvm, &tmp_tbl->rate, "SEARCH"); |
| rs_dump_rate(mvm, &lq_rate, "ACTUAL"); |
| |
| /* |
| * no matching table found, let's by-pass the data collection |
| * and continue to perform rate scale to find the rate table |
| */ |
| rs_stay_in_table(lq_sta, true); |
| goto done; |
| } |
| |
| /* |
| * Updating the frame history depends on whether packets were |
| * aggregated. |
| * |
| * For aggregation, all packets were transmitted at the same rate, the |
| * first index into rate scale table. |
| */ |
| if (info->flags & IEEE80211_TX_STAT_AMPDU) { |
| /* ampdu_ack_len = 0 marks no BA was received. In this case |
| * treat it as a single frame loss as we don't want the success |
| * ratio to dip too quickly because a BA wasn't received |
| */ |
| if (info->status.ampdu_ack_len == 0) |
| info->status.ampdu_len = 1; |
| |
| rs_collect_tx_data(mvm, lq_sta, curr_tbl, lq_rate.index, |
| info->status.ampdu_len, |
| info->status.ampdu_ack_len, |
| reduced_txp); |
| |
| /* Update success/fail counts if not searching for new mode */ |
| if (lq_sta->rs_state == RS_STATE_STAY_IN_COLUMN) { |
| lq_sta->total_success += info->status.ampdu_ack_len; |
| lq_sta->total_failed += (info->status.ampdu_len - |
| info->status.ampdu_ack_len); |
| } |
| } else { |
| /* For legacy, update frame history with for each Tx retry. */ |
| retries = info->status.rates[0].count - 1; |
| /* HW doesn't send more than 15 retries */ |
| retries = min(retries, 15); |
| |
| /* The last transmission may have been successful */ |
| legacy_success = !!(info->flags & IEEE80211_TX_STAT_ACK); |
| /* Collect data for each rate used during failed TX attempts */ |
| for (i = 0; i <= retries; ++i) { |
| lq_hwrate = le32_to_cpu(table->rs_table[i]); |
| rs_rate_from_ucode_rate(lq_hwrate, info->band, |
| &lq_rate); |
| /* |
| * Only collect stats if retried rate is in the same RS |
| * table as active/search. |
| */ |
| if (rs_rate_column_match(&lq_rate, &curr_tbl->rate)) |
| tmp_tbl = curr_tbl; |
| else if (rs_rate_column_match(&lq_rate, |
| &other_tbl->rate)) |
| tmp_tbl = other_tbl; |
| else |
| continue; |
| |
| rs_collect_tx_data(mvm, lq_sta, tmp_tbl, lq_rate.index, |
| 1, i < retries ? 0 : legacy_success, |
| reduced_txp); |
| } |
| |
| /* Update success/fail counts if not searching for new mode */ |
| if (lq_sta->rs_state == RS_STATE_STAY_IN_COLUMN) { |
| lq_sta->total_success += legacy_success; |
| lq_sta->total_failed += retries + (1 - legacy_success); |
| } |
| } |
| /* The last TX rate is cached in lq_sta; it's set in if/else above */ |
| lq_sta->last_rate_n_flags = lq_hwrate; |
| IWL_DEBUG_RATE(mvm, "reduced txpower: %d\n", reduced_txp); |
| done: |
| /* See if there's a better rate or modulation mode to try. */ |
| if (sta->supp_rates[info->band]) |
| rs_rate_scale_perform(mvm, sta, lq_sta, tid); |
| } |
| |
| /* |
| * mac80211 sends us Tx status |
| */ |
| static void rs_mac80211_tx_status(void *mvm_r, |
| struct ieee80211_supported_band *sband, |
| struct ieee80211_sta *sta, void *priv_sta, |
| struct sk_buff *skb) |
| { |
| struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; |
| struct iwl_op_mode *op_mode = (struct iwl_op_mode *)mvm_r; |
| struct iwl_mvm *mvm = IWL_OP_MODE_GET_MVM(op_mode); |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); |
| |
| if (!iwl_mvm_sta_from_mac80211(sta)->vif) |
| return; |
| |
| if (!ieee80211_is_data(hdr->frame_control) || |
| info->flags & IEEE80211_TX_CTL_NO_ACK) |
| return; |
| |
| iwl_mvm_rs_tx_status(mvm, sta, rs_get_tid(hdr), info); |
| } |
| |
| /* |
| * Begin a period of staying with a selected modulation mode. |
| * Set "stay_in_tbl" flag to prevent any mode switches. |
| * Set frame tx success limits according to legacy vs. high-throughput, |
| * and reset overall (spanning all rates) tx success history statistics. |
| * These control how long we stay using same modulation mode before |
| * searching for a new mode. |
| */ |
| static void rs_set_stay_in_table(struct iwl_mvm *mvm, u8 is_legacy, |
| struct iwl_lq_sta *lq_sta) |
| { |
| IWL_DEBUG_RATE(mvm, "Moving to RS_STATE_STAY_IN_COLUMN\n"); |
| lq_sta->rs_state = RS_STATE_STAY_IN_COLUMN; |
| if (is_legacy) { |
| lq_sta->table_count_limit = IWL_MVM_RS_LEGACY_TABLE_COUNT; |
| lq_sta->max_failure_limit = IWL_MVM_RS_LEGACY_FAILURE_LIMIT; |
| lq_sta->max_success_limit = IWL_MVM_RS_LEGACY_SUCCESS_LIMIT; |
| } else { |
| lq_sta->table_count_limit = IWL_MVM_RS_NON_LEGACY_TABLE_COUNT; |
| lq_sta->max_failure_limit = IWL_MVM_RS_NON_LEGACY_FAILURE_LIMIT; |
| lq_sta->max_success_limit = IWL_MVM_RS_NON_LEGACY_SUCCESS_LIMIT; |
| } |
| lq_sta->table_count = 0; |
| lq_sta->total_failed = 0; |
| lq_sta->total_success = 0; |
| lq_sta->flush_timer = jiffies; |
| lq_sta->visited_columns = 0; |
| } |
| |
| static inline int rs_get_max_rate_from_mask(unsigned long rate_mask) |
| { |
| if (rate_mask) |
| return find_last_bit(&rate_mask, BITS_PER_LONG); |
| return IWL_RATE_INVALID; |
| } |
| |
| static int rs_get_max_allowed_rate(struct iwl_lq_sta *lq_sta, |
| const struct rs_tx_column *column) |
| { |
| switch (column->mode) { |
| case RS_LEGACY: |
| return lq_sta->max_legacy_rate_idx; |
| case RS_SISO: |
| return lq_sta->max_siso_rate_idx; |
| case RS_MIMO2: |
| return lq_sta->max_mimo2_rate_idx; |
| default: |
| WARN_ON_ONCE(1); |
| } |
| |
| return lq_sta->max_legacy_rate_idx; |
| } |
| |
| static const u16 *rs_get_expected_tpt_table(struct iwl_lq_sta *lq_sta, |
| const struct rs_tx_column *column, |
| u32 bw) |
| { |
| /* Used to choose among HT tables */ |
| const u16 (*ht_tbl_pointer)[IWL_RATE_COUNT]; |
| |
| if (WARN_ON_ONCE(column->mode != RS_LEGACY && |
| column->mode != RS_SISO && |
| column->mode != RS_MIMO2)) |
| return expected_tpt_legacy; |
| |
| /* Legacy rates have only one table */ |
| if (column->mode == RS_LEGACY) |
| return expected_tpt_legacy; |
| |
| ht_tbl_pointer = expected_tpt_mimo2_20MHz; |
| /* Choose among many HT tables depending on number of streams |
| * (SISO/MIMO2), channel width (20/40/80), SGI, and aggregation |
| * status */ |
| if (column->mode == RS_SISO) { |
| switch (bw) { |
| case RATE_MCS_CHAN_WIDTH_20: |
| ht_tbl_pointer = expected_tpt_siso_20MHz; |
| break; |
| case RATE_MCS_CHAN_WIDTH_40: |
| ht_tbl_pointer = expected_tpt_siso_40MHz; |
| break; |
| case RATE_MCS_CHAN_WIDTH_80: |
| ht_tbl_pointer = expected_tpt_siso_80MHz; |
| break; |
| default: |
| WARN_ON_ONCE(1); |
| } |
| } else if (column->mode == RS_MIMO2) { |
| switch (bw) { |
| case RATE_MCS_CHAN_WIDTH_20: |
| ht_tbl_pointer = expected_tpt_mimo2_20MHz; |
| break; |
| case RATE_MCS_CHAN_WIDTH_40: |
| ht_tbl_pointer = expected_tpt_mimo2_40MHz; |
| break; |
| case RATE_MCS_CHAN_WIDTH_80: |
| ht_tbl_pointer = expected_tpt_mimo2_80MHz; |
| break; |
| default: |
| WARN_ON_ONCE(1); |
| } |
| } else { |
| WARN_ON_ONCE(1); |
| } |
| |
| if (!column->sgi && !lq_sta->is_agg) /* Normal */ |
| return ht_tbl_pointer[0]; |
| else if (column->sgi && !lq_sta->is_agg) /* SGI */ |
| return ht_tbl_pointer[1]; |
| else if (!column->sgi && lq_sta->is_agg) /* AGG */ |
| return ht_tbl_pointer[2]; |
| else /* AGG+SGI */ |
| return ht_tbl_pointer[3]; |
| } |
| |
| static void rs_set_expected_tpt_table(struct iwl_lq_sta *lq_sta, |
| struct iwl_scale_tbl_info *tbl) |
| { |
| struct rs_rate *rate = &tbl->rate; |
| const struct rs_tx_column *column = &rs_tx_columns[tbl->column]; |
| |
| tbl->expected_tpt = rs_get_expected_tpt_table(lq_sta, column, rate->bw); |
| } |
| |
| static s32 rs_get_best_rate(struct iwl_mvm *mvm, |
| struct iwl_lq_sta *lq_sta, |
| struct iwl_scale_tbl_info *tbl, /* "search" */ |
| unsigned long rate_mask, s8 index) |
| { |
| struct iwl_scale_tbl_info *active_tbl = |
| &(lq_sta->lq_info[lq_sta->active_tbl]); |
| s32 success_ratio = active_tbl->win[index].success_ratio; |
| u16 expected_current_tpt = active_tbl->expected_tpt[index]; |
| const u16 *tpt_tbl = tbl->expected_tpt; |
| u16 high_low; |
| u32 target_tpt; |
| int rate_idx; |
| |
| if (success_ratio >= RS_PERCENT(IWL_MVM_RS_SR_NO_DECREASE)) { |
| target_tpt = 100 * expected_current_tpt; |
| IWL_DEBUG_RATE(mvm, |
| "SR %d high. Find rate exceeding EXPECTED_CURRENT %d\n", |
| success_ratio, target_tpt); |
| } else { |
| target_tpt = lq_sta->last_tpt; |
| IWL_DEBUG_RATE(mvm, |
| "SR %d not that good. Find rate exceeding ACTUAL_TPT %d\n", |
| success_ratio, target_tpt); |
| } |
| |
| rate_idx = find_first_bit(&rate_mask, BITS_PER_LONG); |
| |
| while (rate_idx != IWL_RATE_INVALID) { |
| if (target_tpt < (100 * tpt_tbl[rate_idx])) |
| break; |
| |
| high_low = rs_get_adjacent_rate(mvm, rate_idx, rate_mask, |
| tbl->rate.type); |
| |
| rate_idx = (high_low >> 8) & 0xff; |
| } |
| |
| IWL_DEBUG_RATE(mvm, "Best rate found %d target_tp %d expected_new %d\n", |
| rate_idx, target_tpt, |
| rate_idx != IWL_RATE_INVALID ? |
| 100 * tpt_tbl[rate_idx] : IWL_INVALID_VALUE); |
| |
| return rate_idx; |
| } |
| |
| static u32 rs_bw_from_sta_bw(struct ieee80211_sta *sta) |
| { |
| if (sta->bandwidth >= IEEE80211_STA_RX_BW_80) |
| return RATE_MCS_CHAN_WIDTH_80; |
| else if (sta->bandwidth >= IEEE80211_STA_RX_BW_40) |
| return RATE_MCS_CHAN_WIDTH_40; |
| |
| return RATE_MCS_CHAN_WIDTH_20; |
| } |
| |
| /* |
| * Check whether we should continue using same modulation mode, or |
| * begin search for a new mode, based on: |
| * 1) # tx successes or failures while using this mode |
| * 2) # times calling this function |
| * 3) elapsed time in this mode (not used, for now) |
| */ |
| static void rs_stay_in_table(struct iwl_lq_sta *lq_sta, bool force_search) |
| { |
| struct iwl_scale_tbl_info *tbl; |
| int active_tbl; |
| int flush_interval_passed = 0; |
| struct iwl_mvm *mvm; |
| |
| mvm = lq_sta->pers.drv; |
| active_tbl = lq_sta->active_tbl; |
| |
| tbl = &(lq_sta->lq_info[active_tbl]); |
| |
| /* If we've been disallowing search, see if we should now allow it */ |
| if (lq_sta->rs_state == RS_STATE_STAY_IN_COLUMN) { |
| /* Elapsed time using current modulation mode */ |
| if (lq_sta->flush_timer) |
| flush_interval_passed = |
| time_after(jiffies, |
| (unsigned long)(lq_sta->flush_timer + |
| (IWL_MVM_RS_STAY_IN_COLUMN_TIMEOUT * HZ))); |
| |
| /* |
| * Check if we should allow search for new modulation mode. |
| * If many frames have failed or succeeded, or we've used |
| * this same modulation for a long time, allow search, and |
| * reset history stats that keep track of whether we should |
| * allow a new search. Also (below) reset all bitmaps and |
| * stats in active history. |
| */ |
| if (force_search || |
| (lq_sta->total_failed > lq_sta->max_failure_limit) || |
| (lq_sta->total_success > lq_sta->max_success_limit) || |
| ((!lq_sta->search_better_tbl) && |
| (lq_sta->flush_timer) && (flush_interval_passed))) { |
| IWL_DEBUG_RATE(mvm, |
| "LQ: stay is expired %d %d %d\n", |
| lq_sta->total_failed, |
| lq_sta->total_success, |
| flush_interval_passed); |
| |
| /* Allow search for new mode */ |
| lq_sta->rs_state = RS_STATE_SEARCH_CYCLE_STARTED; |
| IWL_DEBUG_RATE(mvm, |
| "Moving to RS_STATE_SEARCH_CYCLE_STARTED\n"); |
| lq_sta->total_failed = 0; |
| lq_sta->total_success = 0; |
| lq_sta->flush_timer = 0; |
| /* mark the current column as visited */ |
| lq_sta->visited_columns = BIT(tbl->column); |
| /* |
| * Else if we've used this modulation mode enough repetitions |
| * (regardless of elapsed time or success/failure), reset |
| * history bitmaps and rate-specific stats for all rates in |
| * active table. |
| */ |
| } else { |
| lq_sta->table_count++; |
| if (lq_sta->table_count >= |
| lq_sta->table_count_limit) { |
| lq_sta->table_count = 0; |
| |
| IWL_DEBUG_RATE(mvm, |
| "LQ: stay in table clear win\n"); |
| rs_rate_scale_clear_tbl_windows(mvm, tbl); |
| } |
| } |
| |
| /* If transitioning to allow "search", reset all history |
| * bitmaps and stats in active table (this will become the new |
| * "search" table). */ |
| if (lq_sta->rs_state == RS_STATE_SEARCH_CYCLE_STARTED) { |
| rs_rate_scale_clear_tbl_windows(mvm, tbl); |
| } |
| } |
| } |
| |
| /* |
| * setup rate table in uCode |
| */ |
| static void rs_update_rate_tbl(struct iwl_mvm *mvm, |
| struct ieee80211_sta *sta, |
| struct iwl_lq_sta *lq_sta, |
| struct iwl_scale_tbl_info *tbl) |
| { |
| rs_fill_lq_cmd(mvm, sta, lq_sta, &tbl->rate); |
| iwl_mvm_send_lq_cmd(mvm, &lq_sta->lq, false); |
| } |
| |
| static bool rs_tweak_rate_tbl(struct iwl_mvm *mvm, |
| struct ieee80211_sta *sta, |
| struct iwl_lq_sta *lq_sta, |
| struct iwl_scale_tbl_info *tbl, |
| enum rs_action scale_action) |
| { |
| if (sta->bandwidth != IEEE80211_STA_RX_BW_80) |
| return false; |
| |
| if (!is_vht_siso(&tbl->rate)) |
| return false; |
| |
| if ((tbl->rate.bw == RATE_MCS_CHAN_WIDTH_80) && |
| (tbl->rate.index == IWL_RATE_MCS_0_INDEX) && |
| (scale_action == RS_ACTION_DOWNSCALE)) { |
| tbl->rate.bw = RATE_MCS_CHAN_WIDTH_20; |
| tbl->rate.index = IWL_RATE_MCS_4_INDEX; |
| IWL_DEBUG_RATE(mvm, "Switch 80Mhz SISO MCS0 -> 20Mhz MCS4\n"); |
| goto tweaked; |
| } |
| |
| /* Go back to 80Mhz MCS1 only if we've established that 20Mhz MCS5 is |
| * sustainable, i.e. we're past the test window. We can't go back |
| * if MCS5 is just tested as this will happen always after switching |
| * to 20Mhz MCS4 because the rate stats are cleared. |
| */ |
| if ((tbl->rate.bw == RATE_MCS_CHAN_WIDTH_20) && |
| (((tbl->rate.index == IWL_RATE_MCS_5_INDEX) && |
| (scale_action == RS_ACTION_STAY)) || |
| ((tbl->rate.index > IWL_RATE_MCS_5_INDEX) && |
| (scale_action == RS_ACTION_UPSCALE)))) { |
| tbl->rate.bw = RATE_MCS_CHAN_WIDTH_80; |
| tbl->rate.index = IWL_RATE_MCS_1_INDEX; |
| IWL_DEBUG_RATE(mvm, "Switch 20Mhz SISO MCS5 -> 80Mhz MCS1\n"); |
| goto tweaked; |
| } |
| |
| return false; |
| |
| tweaked: |
| rs_set_expected_tpt_table(lq_sta, tbl); |
| rs_rate_scale_clear_tbl_windows(mvm, tbl); |
| return true; |
| } |
| |
| static enum rs_column rs_get_next_column(struct iwl_mvm *mvm, |
| struct iwl_lq_sta *lq_sta, |
| struct ieee80211_sta *sta, |
| struct iwl_scale_tbl_info *tbl) |
| { |
| int i, j, max_rate; |
| enum rs_column next_col_id; |
| const struct rs_tx_column *curr_col = &rs_tx_columns[tbl->column]; |
| const struct rs_tx_column *next_col; |
| allow_column_func_t allow_func; |
| u8 valid_ants = iwl_mvm_get_valid_tx_ant(mvm); |
| const u16 *expected_tpt_tbl; |
| u16 tpt, max_expected_tpt; |
| |
| for (i = 0; i < MAX_NEXT_COLUMNS; i++) { |
| next_col_id = curr_col->next_columns[i]; |
| |
| if (next_col_id == RS_COLUMN_INVALID) |
| continue; |
| |
| if (lq_sta->visited_columns & BIT(next_col_id)) { |
| IWL_DEBUG_RATE(mvm, "Skip already visited column %d\n", |
| next_col_id); |
| continue; |
| } |
| |
| next_col = &rs_tx_columns[next_col_id]; |
| |
| if (!rs_is_valid_ant(valid_ants, next_col->ant)) { |
| IWL_DEBUG_RATE(mvm, |
| "Skip column %d as ANT config isn't supported by chip. valid_ants 0x%x column ant 0x%x\n", |
| next_col_id, valid_ants, next_col->ant); |
| continue; |
| } |
| |
| for (j = 0; j < MAX_COLUMN_CHECKS; j++) { |
| allow_func = next_col->checks[j]; |
| if (allow_func && !allow_func(mvm, sta, &tbl->rate, |
| next_col)) |
| break; |
| } |
| |
| if (j != MAX_COLUMN_CHECKS) { |
| IWL_DEBUG_RATE(mvm, |
| "Skip column %d: not allowed (check %d failed)\n", |
| next_col_id, j); |
| |
| continue; |
| } |
| |
| tpt = lq_sta->last_tpt / 100; |
| expected_tpt_tbl = rs_get_expected_tpt_table(lq_sta, next_col, |
| rs_bw_from_sta_bw(sta)); |
| if (WARN_ON_ONCE(!expected_tpt_tbl)) |
| continue; |
| |
| max_rate = rs_get_max_allowed_rate(lq_sta, next_col); |
| if (max_rate == IWL_RATE_INVALID) { |
| IWL_DEBUG_RATE(mvm, |
| "Skip column %d: no rate is allowed in this column\n", |
| next_col_id); |
| continue; |
| } |
| |
| max_expected_tpt = expected_tpt_tbl[max_rate]; |
| if (tpt >= max_expected_tpt) { |
| IWL_DEBUG_RATE(mvm, |
| "Skip column %d: can't beat current TPT. Max expected %d current %d\n", |
| next_col_id, max_expected_tpt, tpt); |
| continue; |
| } |
| |
| IWL_DEBUG_RATE(mvm, |
| "Found potential column %d. Max expected %d current %d\n", |
| next_col_id, max_expected_tpt, tpt); |
| break; |
| } |
| |
| if (i == MAX_NEXT_COLUMNS) |
| return RS_COLUMN_INVALID; |
| |
| return next_col_id; |
| } |
| |
| static int rs_switch_to_column(struct iwl_mvm *mvm, |
| struct iwl_lq_sta *lq_sta, |
| struct ieee80211_sta *sta, |
| enum rs_column col_id) |
| { |
| struct iwl_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); |
| struct iwl_scale_tbl_info *search_tbl = |
| &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]); |
| struct rs_rate *rate = &search_tbl->rate; |
| const struct rs_tx_column *column = &rs_tx_columns[col_id]; |
| const struct rs_tx_column *curr_column = &rs_tx_columns[tbl->column]; |
| u32 sz = (sizeof(struct iwl_scale_tbl_info) - |
| (sizeof(struct iwl_rate_scale_data) * IWL_RATE_COUNT)); |
| unsigned long rate_mask = 0; |
| u32 rate_idx = 0; |
| |
| memcpy(search_tbl, tbl, sz); |
| |
| rate->sgi = column->sgi; |
| rate->ant = column->ant; |
| |
| if (column->mode == RS_LEGACY) { |
| if (lq_sta->band == IEEE80211_BAND_5GHZ) |
| rate->type = LQ_LEGACY_A; |
| else |
| rate->type = LQ_LEGACY_G; |
| |
| rate->bw = RATE_MCS_CHAN_WIDTH_20; |
| rate->ldpc = false; |
| rate_mask = lq_sta->active_legacy_rate; |
| } else if (column->mode == RS_SISO) { |
| rate->type = lq_sta->is_vht ? LQ_VHT_SISO : LQ_HT_SISO; |
| rate_mask = lq_sta->active_siso_rate; |
| } else if (column->mode == RS_MIMO2) { |
| rate->type = lq_sta->is_vht ? LQ_VHT_MIMO2 : LQ_HT_MIMO2; |
| rate_mask = lq_sta->active_mimo2_rate; |
| } else { |
| WARN_ONCE(1, "Bad column mode"); |
| } |
| |
| if (column->mode != RS_LEGACY) { |
| rate->bw = rs_bw_from_sta_bw(sta); |
| rate->ldpc = lq_sta->ldpc; |
| } |
| |
| search_tbl->column = col_id; |
| rs_set_expected_tpt_table(lq_sta, search_tbl); |
| |
| lq_sta->visited_columns |= BIT(col_id); |
| |
| /* Get the best matching rate if we're changing modes. e.g. |
| * SISO->MIMO, LEGACY->SISO, MIMO->SISO |
| */ |
| if (curr_column->mode != column->mode) { |
| rate_idx = rs_get_best_rate(mvm, lq_sta, search_tbl, |
| rate_mask, rate->index); |
| |
| if ((rate_idx == IWL_RATE_INVALID) || |
| !(BIT(rate_idx) & rate_mask)) { |
| IWL_DEBUG_RATE(mvm, |
| "can not switch with index %d" |
| " rate mask %lx\n", |
| rate_idx, rate_mask); |
| |
| goto err; |
| } |
| |
| rate->index = rate_idx; |
| } |
| |
| IWL_DEBUG_RATE(mvm, "Switched to column %d: Index %d\n", |
| col_id, rate->index); |
| |
| return 0; |
| |
| err: |
| rate->type = LQ_NONE; |
| return -1; |
| } |
| |
| static enum rs_action rs_get_rate_action(struct iwl_mvm *mvm, |
| struct iwl_scale_tbl_info *tbl, |
| s32 sr, int low, int high, |
| int current_tpt, |
| int low_tpt, int high_tpt) |
| { |
| enum rs_action action = RS_ACTION_STAY; |
| |
| if ((sr <= RS_PERCENT(IWL_MVM_RS_SR_FORCE_DECREASE)) || |
| (current_tpt == 0)) { |
| IWL_DEBUG_RATE(mvm, |
| "Decrease rate because of low SR\n"); |
| return RS_ACTION_DOWNSCALE; |
| } |
| |
| if ((low_tpt == IWL_INVALID_VALUE) && |
| (high_tpt == IWL_INVALID_VALUE) && |
| (high != IWL_RATE_INVALID)) { |
| IWL_DEBUG_RATE(mvm, |
| "No data about high/low rates. Increase rate\n"); |
| return RS_ACTION_UPSCALE; |
| } |
| |
| if ((high_tpt == IWL_INVALID_VALUE) && |
| (high != IWL_RATE_INVALID) && |
| (low_tpt != IWL_INVALID_VALUE) && |
| (low_tpt < current_tpt)) { |
| IWL_DEBUG_RATE(mvm, |
| "No data about high rate and low rate is worse. Increase rate\n"); |
| return RS_ACTION_UPSCALE; |
| } |
| |
| if ((high_tpt != IWL_INVALID_VALUE) && |
| (high_tpt > current_tpt)) { |
| IWL_DEBUG_RATE(mvm, |
| "Higher rate is better. Increate rate\n"); |
| return RS_ACTION_UPSCALE; |
| } |
| |
| if ((low_tpt != IWL_INVALID_VALUE) && |
| (high_tpt != IWL_INVALID_VALUE) && |
| (low_tpt < current_tpt) && |
| (high_tpt < current_tpt)) { |
| IWL_DEBUG_RATE(mvm, |
| "Both high and low are worse. Maintain rate\n"); |
| return RS_ACTION_STAY; |
| } |
| |
| if ((low_tpt != IWL_INVALID_VALUE) && |
| (low_tpt > current_tpt)) { |
| IWL_DEBUG_RATE(mvm, |
| "Lower rate is better\n"); |
| action = RS_ACTION_DOWNSCALE; |
| goto out; |
| } |
| |
| if ((low_tpt == IWL_INVALID_VALUE) && |
| (low != IWL_RATE_INVALID)) { |
| IWL_DEBUG_RATE(mvm, |
| "No data about lower rate\n"); |
| action = RS_ACTION_DOWNSCALE; |
| goto out; |
| } |
| |
| IWL_DEBUG_RATE(mvm, "Maintain rate\n"); |
| |
| out: |
| if ((action == RS_ACTION_DOWNSCALE) && (low != IWL_RATE_INVALID)) { |
| if (sr >= RS_PERCENT(IWL_MVM_RS_SR_NO_DECREASE)) { |
| IWL_DEBUG_RATE(mvm, |
| "SR is above NO DECREASE. Avoid downscale\n"); |
| action = RS_ACTION_STAY; |
| } else if (current_tpt > (100 * tbl->expected_tpt[low])) { |
| IWL_DEBUG_RATE(mvm, |
| "Current TPT is higher than max expected in low rate. Avoid downscale\n"); |
| action = RS_ACTION_STAY; |
| } else { |
| IWL_DEBUG_RATE(mvm, "Decrease rate\n"); |
| } |
| } |
| |
| return action; |
| } |
| |
| static bool rs_stbc_allow(struct iwl_mvm *mvm, struct ieee80211_sta *sta, |
| struct iwl_lq_sta *lq_sta) |
| { |
| /* Our chip supports Tx STBC and the peer is an HT/VHT STA which |
| * supports STBC of at least 1*SS |
| */ |
| if (!lq_sta->stbc_capable) |
| return false; |
| |
| if (!iwl_mvm_bt_coex_is_mimo_allowed(mvm, sta)) |
| return false; |
| |
| return true; |
| } |
| |
| static void rs_get_adjacent_txp(struct iwl_mvm *mvm, int index, |
| int *weaker, int *stronger) |
| { |
| *weaker = index + IWL_MVM_RS_TPC_TX_POWER_STEP; |
| if (*weaker > TPC_MAX_REDUCTION) |
| *weaker = TPC_INVALID; |
| |
| *stronger = index - IWL_MVM_RS_TPC_TX_POWER_STEP; |
| if (*stronger < 0) |
| *stronger = TPC_INVALID; |
| } |
| |
| static bool rs_tpc_allowed(struct iwl_mvm *mvm, struct ieee80211_vif *vif, |
| struct rs_rate *rate, enum ieee80211_band band) |
| { |
| int index = rate->index; |
| bool cam = (iwlmvm_mod_params.power_scheme == IWL_POWER_SCHEME_CAM); |
| bool sta_ps_disabled = (vif->type == NL80211_IFTYPE_STATION && |
| !vif->bss_conf.ps); |
| |
| IWL_DEBUG_RATE(mvm, "cam: %d sta_ps_disabled %d\n", |
| cam, sta_ps_disabled); |
| /* |
| * allow tpc only if power management is enabled, or bt coex |
| * activity grade allows it and we are on 2.4Ghz. |
| */ |
| if ((cam || sta_ps_disabled) && |
| !iwl_mvm_bt_coex_is_tpc_allowed(mvm, band)) |
| return false; |
| |
| IWL_DEBUG_RATE(mvm, "check rate, table type: %d\n", rate->type); |
| if (is_legacy(rate)) |
| return index == IWL_RATE_54M_INDEX; |
| if (is_ht(rate)) |
| return index == IWL_RATE_MCS_7_INDEX; |
| if (is_vht(rate)) |
| return index == IWL_RATE_MCS_7_INDEX || |
| index == IWL_RATE_MCS_8_INDEX || |
| index == IWL_RATE_MCS_9_INDEX; |
| |
| WARN_ON_ONCE(1); |
| return false; |
| } |
| |
| enum tpc_action { |
| TPC_ACTION_STAY, |
| TPC_ACTION_DECREASE, |
| TPC_ACTION_INCREASE, |
| TPC_ACTION_NO_RESTIRCTION, |
| }; |
| |
| static enum tpc_action rs_get_tpc_action(struct iwl_mvm *mvm, |
| s32 sr, int weak, int strong, |
| int current_tpt, |
| int weak_tpt, int strong_tpt) |
| { |
| /* stay until we have valid tpt */ |
| if (current_tpt == IWL_INVALID_VALUE) { |
| IWL_DEBUG_RATE(mvm, "no current tpt. stay.\n"); |
| return TPC_ACTION_STAY; |
| } |
| |
| /* Too many failures, increase txp */ |
| if (sr <= RS_PERCENT(IWL_MVM_RS_TPC_SR_FORCE_INCREASE) || |
| current_tpt == 0) { |
| IWL_DEBUG_RATE(mvm, "increase txp because of weak SR\n"); |
| return TPC_ACTION_NO_RESTIRCTION; |
| } |
| |
| /* try decreasing first if applicable */ |
| if (weak != TPC_INVALID) { |
| if (weak_tpt == IWL_INVALID_VALUE && |
| (strong_tpt == IWL_INVALID_VALUE || |
| current_tpt >= strong_tpt)) { |
| IWL_DEBUG_RATE(mvm, |
| "no weak txp measurement. decrease txp\n"); |
| return TPC_ACTION_DECREASE; |
| } |
| |
| if (weak_tpt > current_tpt) { |
| IWL_DEBUG_RATE(mvm, |
| "lower txp has better tpt. decrease txp\n"); |
| return TPC_ACTION_DECREASE; |
| } |
| } |
| |
| /* next, increase if needed */ |
| if (sr < RS_PERCENT(IWL_MVM_RS_TPC_SR_NO_INCREASE) && |
| strong != TPC_INVALID) { |
| if (weak_tpt == IWL_INVALID_VALUE && |
| strong_tpt != IWL_INVALID_VALUE && |
| current_tpt < strong_tpt) { |
| IWL_DEBUG_RATE(mvm, |
| "higher txp has better tpt. increase txp\n"); |
| return TPC_ACTION_INCREASE; |
| } |
| |
| if (weak_tpt < current_tpt && |
| (strong_tpt == IWL_INVALID_VALUE || |
| strong_tpt > current_tpt)) { |
| IWL_DEBUG_RATE(mvm, |
| "lower txp has worse tpt. increase txp\n"); |
| return TPC_ACTION_INCREASE; |
| } |
| } |
| |
| IWL_DEBUG_RATE(mvm, "no need to increase or decrease txp - stay\n"); |
| return TPC_ACTION_STAY; |
| } |
| |
| static bool rs_tpc_perform(struct iwl_mvm *mvm, |
| struct ieee80211_sta *sta, |
| struct iwl_lq_sta *lq_sta, |
| struct iwl_scale_tbl_info *tbl) |
| { |
| struct iwl_mvm_sta *mvm_sta = iwl_mvm_sta_from_mac80211(sta); |
| struct ieee80211_vif *vif = mvm_sta->vif; |
| struct ieee80211_chanctx_conf *chanctx_conf; |
| enum ieee80211_band band; |
| struct iwl_rate_scale_data *window; |
| struct rs_rate *rate = &tbl->rate; |
| enum tpc_action action; |
| s32 sr; |
| u8 cur = lq_sta->lq.reduced_tpc; |
| int current_tpt; |
| int weak, strong; |
| int weak_tpt = IWL_INVALID_VALUE, strong_tpt = IWL_INVALID_VALUE; |
| |
| #ifdef CONFIG_MAC80211_DEBUGFS |
| if (lq_sta->pers.dbg_fixed_txp_reduction <= TPC_MAX_REDUCTION) { |
| IWL_DEBUG_RATE(mvm, "fixed tpc: %d\n", |
| lq_sta->pers.dbg_fixed_txp_reduction); |
| lq_sta->lq.reduced_tpc = lq_sta->pers.dbg_fixed_txp_reduction; |
| return cur != lq_sta->pers.dbg_fixed_txp_reduction; |
| } |
| #endif |
| |
| rcu_read_lock(); |
| chanctx_conf = rcu_dereference(vif->chanctx_conf); |
| if (WARN_ON(!chanctx_conf)) |
| band = IEEE80211_NUM_BANDS; |
| else |
| band = chanctx_conf->def.chan->band; |
| rcu_read_unlock(); |
| |
| if (!rs_tpc_allowed(mvm, vif, rate, band)) { |
| IWL_DEBUG_RATE(mvm, |
| "tpc is not allowed. remove txp restrictions\n"); |
| lq_sta->lq.reduced_tpc = TPC_NO_REDUCTION; |
| return cur != TPC_NO_REDUCTION; |
| } |
| |
| rs_get_adjacent_txp(mvm, cur, &weak, &strong); |
| |
| /* Collect measured throughputs for current and adjacent rates */ |
| window = tbl->tpc_win; |
| sr = window[cur].success_ratio; |
| current_tpt = window[cur].average_tpt; |
| if (weak != TPC_INVALID) |
| weak_tpt = window[weak].average_tpt; |
| if (strong != TPC_INVALID) |
| strong_tpt = window[strong].average_tpt; |
| |
| IWL_DEBUG_RATE(mvm, |
| "(TPC: %d): cur_tpt %d SR %d weak %d strong %d weak_tpt %d strong_tpt %d\n", |
| cur, current_tpt, sr, weak, strong, |
| weak_tpt, strong_tpt); |
| |
| action = rs_get_tpc_action(mvm, sr, weak, strong, |
| current_tpt, weak_tpt, strong_tpt); |
| |
| /* override actions if we are on the edge */ |
| if (weak == TPC_INVALID && action == TPC_ACTION_DECREASE) { |
| IWL_DEBUG_RATE(mvm, "already in lowest txp, stay\n"); |
| action = TPC_ACTION_STAY; |
| } else if (strong == TPC_INVALID && |
| (action == TPC_ACTION_INCREASE || |
| action == TPC_ACTION_NO_RESTIRCTION)) { |
| IWL_DEBUG_RATE(mvm, "already in highest txp, stay\n"); |
| action = TPC_ACTION_STAY; |
| } |
| |
| switch (action) { |
| case TPC_ACTION_DECREASE: |
| lq_sta->lq.reduced_tpc = weak; |
| return true; |
| case TPC_ACTION_INCREASE: |
| lq_sta->lq.reduced_tpc = strong; |
| return true; |
| case TPC_ACTION_NO_RESTIRCTION: |
| lq_sta->lq.reduced_tpc = TPC_NO_REDUCTION; |
| return true; |
| case TPC_ACTION_STAY: |
| /* do nothing */ |
| break; |
| } |
| return false; |
| } |
| |
| /* |
| * Do rate scaling and search for new modulation mode. |
| */ |
| static void rs_rate_scale_perform(struct iwl_mvm *mvm, |
| struct ieee80211_sta *sta, |
| struct iwl_lq_sta *lq_sta, |
| int tid) |
| { |
| int low = IWL_RATE_INVALID; |
| int high = IWL_RATE_INVALID; |
| int index; |
| struct iwl_rate_scale_data *window = NULL; |
| int current_tpt = IWL_INVALID_VALUE; |
| int low_tpt = IWL_INVALID_VALUE; |
| int high_tpt = IWL_INVALID_VALUE; |
| u32 fail_count; |
| enum rs_action scale_action = RS_ACTION_STAY; |
| u16 rate_mask; |
| u8 update_lq = 0; |
| struct iwl_scale_tbl_info *tbl, *tbl1; |
| u8 active_tbl = 0; |
| u8 done_search = 0; |
| u16 high_low; |
| s32 sr; |
| u8 prev_agg = lq_sta->is_agg; |
| struct iwl_mvm_sta *sta_priv = iwl_mvm_sta_from_mac80211(sta); |
| struct iwl_mvm_tid_data *tid_data; |
| struct rs_rate *rate; |
| |
| lq_sta->is_agg = !!sta_priv->agg_tids; |
| |
| /* |
| * Select rate-scale / modulation-mode table to work with in |
| * the rest of this function: "search" if searching for better |
| * modulation mode, or "active" if doing rate scaling within a mode. |
| */ |
| if (!lq_sta->search_better_tbl) |
| active_tbl = lq_sta->active_tbl; |
| else |
| active_tbl = 1 - lq_sta->active_tbl; |
| |
| tbl = &(lq_sta->lq_info[active_tbl]); |
| rate = &tbl->rate; |
| |
| if (prev_agg != lq_sta->is_agg) { |
| IWL_DEBUG_RATE(mvm, |
| "Aggregation changed: prev %d current %d. Update expected TPT table\n", |
| prev_agg, lq_sta->is_agg); |
| rs_set_expected_tpt_table(lq_sta, tbl); |
| rs_rate_scale_clear_tbl_windows(mvm, tbl); |
| } |
| |
| /* current tx rate */ |
| index = rate->index; |
| |
| /* rates available for this association, and for modulation mode */ |
| rate_mask = rs_get_supported_rates(lq_sta, rate); |
| |
| if (!(BIT(index) & rate_mask)) { |
| IWL_ERR(mvm, "Current Rate is not valid\n"); |
| if (lq_sta->search_better_tbl) { |
| /* revert to active table if search table is not valid*/ |
| rate->type = LQ_NONE; |
| lq_sta->search_better_tbl = 0; |
| tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); |
| rs_update_rate_tbl(mvm, sta, lq_sta, tbl); |
| } |
| return; |
| } |
| |
| /* Get expected throughput table and history window for current rate */ |
| if (!tbl->expected_tpt) { |
| IWL_ERR(mvm, "tbl->expected_tpt is NULL\n"); |
| return; |
| } |
| |
| /* TODO: handle rate_idx_mask and rate_idx_mcs_mask */ |
| window = &(tbl->win[index]); |
| |
| /* |
| * If there is not enough history to calculate actual average |
| * throughput, keep analyzing results of more tx frames, without |
| * changing rate or mode (bypass most of the rest of this function). |
| * Set up new rate table in uCode only if old rate is not supported |
| * in current association (use new rate found above). |
| */ |
| fail_count = window->counter - window->success_counter; |
| if ((fail_count < IWL_MVM_RS_RATE_MIN_FAILURE_TH) && |
| (window->success_counter < IWL_MVM_RS_RATE_MIN_SUCCESS_TH)) { |
| IWL_DEBUG_RATE(mvm, |
| "%s: Test Window: succ %d total %d\n", |
| rs_pretty_rate(rate), |
| window->success_counter, window->counter); |
| |
| /* Can't calculate this yet; not enough history */ |
| window->average_tpt = IWL_INVALID_VALUE; |
| |
| /* Should we stay with this modulation mode, |
| * or search for a new one? */ |
| rs_stay_in_table(lq_sta, false); |
| |
| return; |
| } |
| |
| /* If we are searching for better modulation mode, check success. */ |
| if (lq_sta->search_better_tbl) { |
| /* If good success, continue using the "search" mode; |
| * no need to send new link quality command, since we're |
| * continuing to use the setup that we've been trying. */ |
| if (window->average_tpt > lq_sta->last_tpt) { |
| IWL_DEBUG_RATE(mvm, |
| "SWITCHING TO NEW TABLE SR: %d " |
| "cur-tpt %d old-tpt %d\n", |
| window->success_ratio, |
| window->average_tpt, |
| lq_sta->last_tpt); |
| |
| /* Swap tables; "search" becomes "active" */ |
| lq_sta->active_tbl = active_tbl; |
| current_tpt = window->average_tpt; |
| /* Else poor success; go back to mode in "active" table */ |
| } else { |
| IWL_DEBUG_RATE(mvm, |
| "GOING BACK TO THE OLD TABLE: SR %d " |
| "cur-tpt %d old-tpt %d\n", |
| window->success_ratio, |
| window->average_tpt, |
| lq_sta->last_tpt); |
| |
| /* Nullify "search" table */ |
| rate->type = LQ_NONE; |
| |
| /* Revert to "active" table */ |
| active_tbl = lq_sta->active_tbl; |
| tbl = &(lq_sta->lq_info[active_tbl]); |
| |
| /* Revert to "active" rate and throughput info */ |
| index = tbl->rate.index; |
| current_tpt = lq_sta->last_tpt; |
| |
| /* Need to set up a new rate table in uCode */ |
| update_lq = 1; |
| } |
| |
| /* Either way, we've made a decision; modulation mode |
| * search is done, allow rate adjustment next time. */ |
| lq_sta->search_better_tbl = 0; |
| done_search = 1; /* Don't switch modes below! */ |
| goto lq_update; |
| } |
| |
| /* (Else) not in search of better modulation mode, try for better |
| * starting rate, while staying in this mode. */ |
| high_low = rs_get_adjacent_rate(mvm, index, rate_mask, rate->type); |
| low = high_low & 0xff; |
| high = (high_low >> 8) & 0xff; |
| |
| /* TODO: handle rate_idx_mask and rate_idx_mcs_mask */ |
| |
| sr = window->success_ratio; |
| |
| /* Collect measured throughputs for current and adjacent rates */ |
| current_tpt = window->average_tpt; |
| if (low != IWL_RATE_INVALID) |
| low_tpt = tbl->win[low].average_tpt; |
| if (high != IWL_RATE_INVALID) |
| high_tpt = tbl->win[high].average_tpt; |
| |
| IWL_DEBUG_RATE(mvm, |
| "%s: cur_tpt %d SR %d low %d high %d low_tpt %d high_tpt %d\n", |
| rs_pretty_rate(rate), current_tpt, sr, |
| low, high, low_tpt, high_tpt); |
| |
| scale_action = rs_get_rate_action(mvm, tbl, sr, low, high, |
| current_tpt, low_tpt, high_tpt); |
| |
| /* Force a search in case BT doesn't like us being in MIMO */ |
| if (is_mimo(rate) && |
| !iwl_mvm_bt_coex_is_mimo_allowed(mvm, sta)) { |
| IWL_DEBUG_RATE(mvm, |
| "BT Coex forbids MIMO. Search for new config\n"); |
| rs_stay_in_table(lq_sta, true); |
| goto lq_update; |
| } |
| |
| switch (scale_action) { |
| case RS_ACTION_DOWNSCALE: |
| /* Decrease starting rate, update uCode's rate table */ |
| if (low != IWL_RATE_INVALID) { |
| update_lq = 1; |
| index = low; |
| } else { |
| IWL_DEBUG_RATE(mvm, |
| "At the bottom rate. Can't decrease\n"); |
| } |
| |
| break; |
| case RS_ACTION_UPSCALE: |
| /* Increase starting rate, update uCode's rate table */ |
| if (high != IWL_RATE_INVALID) { |
| update_lq = 1; |
| index = high; |
| } else { |
| IWL_DEBUG_RATE(mvm, |
| "At the top rate. Can't increase\n"); |
| } |
| |
| break; |
| case RS_ACTION_STAY: |
| /* No change */ |
| if (lq_sta->rs_state == RS_STATE_STAY_IN_COLUMN) |
| update_lq = rs_tpc_perform(mvm, sta, lq_sta, tbl); |
| break; |
| default: |
| break; |
| } |
| |
| lq_update: |
| /* Replace uCode's rate table for the destination station. */ |
| if (update_lq) { |
| tbl->rate.index = index; |
| if (IWL_MVM_RS_80_20_FAR_RANGE_TWEAK) |
| rs_tweak_rate_tbl(mvm, sta, lq_sta, tbl, scale_action); |
| rs_update_rate_tbl(mvm, sta, lq_sta, tbl); |
| } |
| |
| rs_stay_in_table(lq_sta, false); |
| |
| /* |
| * Search for new modulation mode if we're: |
| * 1) Not changing rates right now |
| * 2) Not just finishing up a search |
| * 3) Allowing a new search |
| */ |
| if (!update_lq && !done_search && |
| lq_sta->rs_state == RS_STATE_SEARCH_CYCLE_STARTED |
| && window->counter) { |
| enum rs_column next_column; |
| |
| /* Save current throughput to compare with "search" throughput*/ |
| lq_sta->last_tpt = current_tpt; |
| |
| IWL_DEBUG_RATE(mvm, |
| "Start Search: update_lq %d done_search %d rs_state %d win->counter %d\n", |
| update_lq, done_search, lq_sta->rs_state, |
| window->counter); |
| |
| next_column = rs_get_next_column(mvm, lq_sta, sta, tbl); |
| if (next_column != RS_COLUMN_INVALID) { |
| int ret = rs_switch_to_column(mvm, lq_sta, sta, |
| next_column); |
| if (!ret) |
| lq_sta->search_better_tbl = 1; |
| } else { |
| IWL_DEBUG_RATE(mvm, |
| "No more columns to explore in search cycle. Go to RS_STATE_SEARCH_CYCLE_ENDED\n"); |
| lq_sta->rs_state = RS_STATE_SEARCH_CYCLE_ENDED; |
| } |
| |
| /* If new "search" mode was selected, set up in uCode table */ |
| if (lq_sta->search_better_tbl) { |
| /* Access the "search" table, clear its history. */ |
| tbl = &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]); |
| rs_rate_scale_clear_tbl_windows(mvm, tbl); |
| |
| /* Use new "search" start rate */ |
| index = tbl->rate.index; |
| |
| rs_dump_rate(mvm, &tbl->rate, |
| "Switch to SEARCH TABLE:"); |
| rs_update_rate_tbl(mvm, sta, lq_sta, tbl); |
| } else { |
| done_search = 1; |
| } |
| } |
| |
| if (done_search && lq_sta->rs_state == RS_STATE_SEARCH_CYCLE_ENDED) { |
| /* If the "active" (non-search) mode was legacy, |
| * and we've tried switching antennas, |
| * but we haven't been able to try HT modes (not available), |
| * stay with best antenna legacy modulation for a while |
| * before next round of mode comparisons. */ |
| tbl1 = &(lq_sta->lq_info[lq_sta->active_tbl]); |
| if (is_legacy(&tbl1->rate)) { |
| IWL_DEBUG_RATE(mvm, "LQ: STAY in legacy table\n"); |
| |
| if (tid != IWL_MAX_TID_COUNT) { |
| tid_data = &sta_priv->tid_data[tid]; |
| if (tid_data->state != IWL_AGG_OFF) { |
| IWL_DEBUG_RATE(mvm, |
| "Stop aggregation on tid %d\n", |
| tid); |
| ieee80211_stop_tx_ba_session(sta, tid); |
| } |
| } |
| rs_set_stay_in_table(mvm, 1, lq_sta); |
| } else { |
| /* If we're in an HT mode, and all 3 mode switch actions |
| * have been tried and compared, stay in this best modulation |
| * mode for a while before next round of mode comparisons. */ |
| if ((lq_sta->last_tpt > IWL_AGG_TPT_THREHOLD) && |
| (lq_sta->tx_agg_tid_en & (1 << tid)) && |
| (tid != IWL_MAX_TID_COUNT)) { |
| tid_data = &sta_priv->tid_data[tid]; |
| if (tid_data->state == IWL_AGG_OFF) { |
| IWL_DEBUG_RATE(mvm, |
| "try to aggregate tid %d\n", |
| tid); |
| rs_tl_turn_on_agg(mvm, tid, |
| lq_sta, sta); |
| } |
| } |
| rs_set_stay_in_table(mvm, 0, lq_sta); |
| } |
| } |
| } |
| |
| struct rs_init_rate_info { |
| s8 rssi; |
| u8 rate_idx; |
| }; |
| |
| static const struct rs_init_rate_info rs_optimal_rates_24ghz_legacy[] = { |
| { -60, IWL_RATE_54M_INDEX }, |
| { -64, IWL_RATE_48M_INDEX }, |
| { -68, IWL_RATE_36M_INDEX }, |
| { -80, IWL_RATE_24M_INDEX }, |
| { -84, IWL_RATE_18M_INDEX }, |
| { -85, IWL_RATE_12M_INDEX }, |
| { -86, IWL_RATE_11M_INDEX }, |
| { -88, IWL_RATE_5M_INDEX }, |
| { -90, IWL_RATE_2M_INDEX }, |
| { S8_MIN, IWL_RATE_1M_INDEX }, |
| }; |
| |
| static const struct rs_init_rate_info rs_optimal_rates_5ghz_legacy[] = { |
| { -60, IWL_RATE_54M_INDEX }, |
| { -64, IWL_RATE_48M_INDEX }, |
| { -72, IWL_RATE_36M_INDEX }, |
| { -80, IWL_RATE_24M_INDEX }, |
| { -84, IWL_RATE_18M_INDEX }, |
| { -85, IWL_RATE_12M_INDEX }, |
| { -87, IWL_RATE_9M_INDEX }, |
| { S8_MIN, IWL_RATE_6M_INDEX }, |
| }; |
| |
| static const struct rs_init_rate_info rs_optimal_rates_ht[] = { |
| { -60, IWL_RATE_MCS_7_INDEX }, |
| { -64, IWL_RATE_MCS_6_INDEX }, |
| { -68, IWL_RATE_MCS_5_INDEX }, |
| { -72, IWL_RATE_MCS_4_INDEX }, |
| { -80, IWL_RATE_MCS_3_INDEX }, |
| { -84, IWL_RATE_MCS_2_INDEX }, |
| { -85, IWL_RATE_MCS_1_INDEX }, |
| { S8_MIN, IWL_RATE_MCS_0_INDEX}, |
| }; |
| |
| static const struct rs_init_rate_info rs_optimal_rates_vht_20mhz[] = { |
| { -60, IWL_RATE_MCS_8_INDEX }, |
| { -64, IWL_RATE_MCS_7_INDEX }, |
| { -68, IWL_RATE_MCS_6_INDEX }, |
| { -72, IWL_RATE_MCS_5_INDEX }, |
| { -80, IWL_RATE_MCS_4_INDEX }, |
| { -84, IWL_RATE_MCS_3_INDEX }, |
| { -85, IWL_RATE_MCS_2_INDEX }, |
| { -87, IWL_RATE_MCS_1_INDEX }, |
| { S8_MIN, IWL_RATE_MCS_0_INDEX}, |
| }; |
| |
| static const struct rs_init_rate_info rs_optimal_rates_vht_40_80mhz[] = { |
| { -60, IWL_RATE_MCS_9_INDEX }, |
| { -64, IWL_RATE_MCS_8_INDEX }, |
| { -68, IWL_RATE_MCS_7_INDEX }, |
| { -72, IWL_RATE_MCS_6_INDEX }, |
| { -80, IWL_RATE_MCS_5_INDEX }, |
| { -84, IWL_RATE_MCS_4_INDEX }, |
| { -85, IWL_RATE_MCS_3_INDEX }, |
| { -87, IWL_RATE_MCS_2_INDEX }, |
| { -88, IWL_RATE_MCS_1_INDEX }, |
| { S8_MIN, IWL_RATE_MCS_0_INDEX }, |
| }; |
| |
| #define IWL_RS_LOW_RSSI_THRESHOLD (-76) /* dBm */ |
| |
| /* Init the optimal rate based on STA caps |
| * This combined with rssi is used to report the last tx rate |
| * to userspace when we haven't transmitted enough frames. |
| */ |
| static void rs_init_optimal_rate(struct iwl_mvm *mvm, |
| struct ieee80211_sta *sta, |
| struct iwl_lq_sta *lq_sta) |
| { |
| struct rs_rate *rate = &lq_sta->optimal_rate; |
| |
| if (lq_sta->max_mimo2_rate_idx != IWL_RATE_INVALID) |
| rate->type = lq_sta->is_vht ? LQ_VHT_MIMO2 : LQ_HT_MIMO2; |
| else if (lq_sta->max_siso_rate_idx != IWL_RATE_INVALID) |
| rate->type = lq_sta->is_vht ? LQ_VHT_SISO : LQ_HT_SISO; |
| else if (lq_sta->band == IEEE80211_BAND_5GHZ) |
| rate->type = LQ_LEGACY_A; |
| else |
| rate->type = LQ_LEGACY_G; |
| |
| rate->bw = rs_bw_from_sta_bw(sta); |
| rate->sgi = rs_sgi_allow(mvm, sta, rate, NULL); |
| |
| /* ANT/LDPC/STBC aren't relevant for the rate reported to userspace */ |
| |
| if (is_mimo(rate)) { |
| lq_sta->optimal_rate_mask = lq_sta->active_mimo2_rate; |
| } else if (is_siso(rate)) { |
| lq_sta->optimal_rate_mask = lq_sta->active_siso_rate; |
| } else { |
| lq_sta->optimal_rate_mask = lq_sta->active_legacy_rate; |
| |
| if (lq_sta->band == IEEE80211_BAND_5GHZ) { |
| lq_sta->optimal_rates = rs_optimal_rates_5ghz_legacy; |
| lq_sta->optimal_nentries = |
| ARRAY_SIZE(rs_optimal_rates_5ghz_legacy); |
| } else { |
| lq_sta->optimal_rates = rs_optimal_rates_24ghz_legacy; |
| lq_sta->optimal_nentries = |
| ARRAY_SIZE(rs_optimal_rates_24ghz_legacy); |
| } |
| } |
| |
| if (is_vht(rate)) { |
| if (rate->bw == RATE_MCS_CHAN_WIDTH_20) { |
| lq_sta->optimal_rates = rs_optimal_rates_vht_20mhz; |
| lq_sta->optimal_nentries = |
| ARRAY_SIZE(rs_optimal_rates_vht_20mhz); |
| } else { |
| lq_sta->optimal_rates = rs_optimal_rates_vht_40_80mhz; |
| lq_sta->optimal_nentries = |
| ARRAY_SIZE(rs_optimal_rates_vht_40_80mhz); |
| } |
| } else if (is_ht(rate)) { |
| lq_sta->optimal_rates = rs_optimal_rates_ht; |
| lq_sta->optimal_nentries = ARRAY_SIZE(rs_optimal_rates_ht); |
| } |
| } |
| |
| /* Compute the optimal rate index based on RSSI */ |
| static struct rs_rate *rs_get_optimal_rate(struct iwl_mvm *mvm, |
| struct iwl_lq_sta *lq_sta) |
| { |
| struct rs_rate *rate = &lq_sta->optimal_rate; |
| int i; |
| |
| rate->index = find_first_bit(&lq_sta->optimal_rate_mask, |
| BITS_PER_LONG); |
| |
| for (i = 0; i < lq_sta->optimal_nentries; i++) { |
| int rate_idx = lq_sta->optimal_rates[i].rate_idx; |
| |
| if ((lq_sta->pers.last_rssi >= lq_sta->optimal_rates[i].rssi) && |
| (BIT(rate_idx) & lq_sta->optimal_rate_mask)) { |
| rate->index = rate_idx; |
| break; |
| } |
| } |
| |
| return rate; |
| } |
| |
| /* Choose an initial legacy rate and antenna to use based on the RSSI |
| * of last Rx |
| */ |
| static void rs_get_initial_rate(struct iwl_mvm *mvm, |
| struct ieee80211_sta *sta, |
| struct iwl_lq_sta *lq_sta, |
| enum ieee80211_band band, |
| struct rs_rate *rate) |
| { |
| int i, nentries; |
| unsigned long active_rate; |
| s8 best_rssi = S8_MIN; |
| u8 best_ant = ANT_NONE; |
| u8 valid_tx_ant = iwl_mvm_get_valid_tx_ant(mvm); |
| const struct rs_init_rate_info *initial_rates; |
| |
| for (i = 0; i < ARRAY_SIZE(lq_sta->pers.chain_signal); i++) { |
| if (!(lq_sta->pers.chains & BIT(i))) |
| continue; |
| |
| if (lq_sta->pers.chain_signal[i] > best_rssi) { |
| best_rssi = lq_sta->pers.chain_signal[i]; |
| best_ant = BIT(i); |
| } |
| } |
| |
| IWL_DEBUG_RATE(mvm, "Best ANT: %s Best RSSI: %d\n", |
| rs_pretty_ant(best_ant), best_rssi); |
| |
| if (best_ant != ANT_A && best_ant != ANT_B) |
| rate->ant = first_antenna(valid_tx_ant); |
| else |
| rate->ant = best_ant; |
| |
| rate->sgi = false; |
| rate->ldpc = false; |
| rate->bw = RATE_MCS_CHAN_WIDTH_20; |
| |
| rate->index = find_first_bit(&lq_sta->active_legacy_rate, |
| BITS_PER_LONG); |
| |
| if (band == IEEE80211_BAND_5GHZ) { |
| rate->type = LQ_LEGACY_A; |
| initial_rates = rs_optimal_rates_5ghz_legacy; |
| nentries = ARRAY_SIZE(rs_optimal_rates_5ghz_legacy); |
| } else { |
| rate->type = LQ_LEGACY_G; |
| initial_rates = rs_optimal_rates_24ghz_legacy; |
| nentries = ARRAY_SIZE(rs_optimal_rates_24ghz_legacy); |
| } |
| |
| if (!IWL_MVM_RS_RSSI_BASED_INIT_RATE) |
| goto out; |
| |
| /* Start from a higher rate if the corresponding debug capability |
| * is enabled. The rate is chosen according to AP capabilities. |
| * In case of VHT/HT when the rssi is low fallback to the case of |
| * legacy rates. |
| */ |
| if (sta->vht_cap.vht_supported && |
| best_rssi > IWL_RS_LOW_RSSI_THRESHOLD) { |
| if (sta->bandwidth >= IEEE80211_STA_RX_BW_40) { |
| initial_rates = rs_optimal_rates_vht_40_80mhz; |
| nentries = ARRAY_SIZE(rs_optimal_rates_vht_40_80mhz); |
| if (sta->bandwidth >= IEEE80211_STA_RX_BW_80) |
| rate->bw = RATE_MCS_CHAN_WIDTH_80; |
| else |
| rate->bw = RATE_MCS_CHAN_WIDTH_40; |
| } else if (sta->bandwidth == IEEE80211_STA_RX_BW_20) { |
| initial_rates = rs_optimal_rates_vht_20mhz; |
| nentries = ARRAY_SIZE(rs_optimal_rates_vht_20mhz); |
| rate->bw = RATE_MCS_CHAN_WIDTH_20; |
| } else { |
| IWL_ERR(mvm, "Invalid BW %d\n", sta->bandwidth); |
| goto out; |
| } |
| active_rate = lq_sta->active_siso_rate; |
| rate->type = LQ_VHT_SISO; |
| } else if (sta->ht_cap.ht_supported && |
| best_rssi > IWL_RS_LOW_RSSI_THRESHOLD) { |
| initial_rates = rs_optimal_rates_ht; |
| nentries = ARRAY_SIZE(rs_optimal_rates_ht); |
| active_rate = lq_sta->active_siso_rate; |
| rate->type = LQ_HT_SISO; |
| } else { |
| active_rate = lq_sta->active_legacy_rate; |
| } |
| |
| for (i = 0; i < nentries; i++) { |
| int rate_idx = initial_rates[i].rate_idx; |
| |
| if ((best_rssi >= initial_rates[i].rssi) && |
| (BIT(rate_idx) & active_rate)) { |
| rate->index = rate_idx; |
| break; |
| } |
| } |
| |
| out: |
| rs_dump_rate(mvm, rate, "INITIAL"); |
| } |
| |
| /* Save info about RSSI of last Rx */ |
| void rs_update_last_rssi(struct iwl_mvm *mvm, |
| struct iwl_lq_sta *lq_sta, |
| struct ieee80211_rx_status *rx_status) |
| { |
| int i; |
| |
| lq_sta->pers.chains = rx_status->chains; |
| lq_sta->pers.chain_signal[0] = rx_status->chain_signal[0]; |
| lq_sta->pers.chain_signal[1] = rx_status->chain_signal[1]; |
| lq_sta->pers.chain_signal[2] = rx_status->chain_signal[2]; |
| lq_sta->pers.last_rssi = S8_MIN; |
| |
| for (i = 0; i < ARRAY_SIZE(lq_sta->pers.chain_signal); i++) { |
| if (!(lq_sta->pers.chains & BIT(i))) |
| continue; |
| |
| if (lq_sta->pers.chain_signal[i] > lq_sta->pers.last_rssi) |
| lq_sta->pers.last_rssi = lq_sta->pers.chain_signal[i]; |
| } |
| } |
| |
| /** |
| * rs_initialize_lq - Initialize a station's hardware rate table |
| * |
| * The uCode's station table contains a table of fallback rates |
| * for automatic fallback during transmission. |
| * |
| * NOTE: This sets up a default set of values. These will be replaced later |
| * if the driver's iwl-agn-rs rate scaling algorithm is used, instead of |
| * rc80211_simple. |
| * |
| * NOTE: Run REPLY_ADD_STA command to set up station table entry, before |
| * calling this function (which runs REPLY_TX_LINK_QUALITY_CMD, |
| * which requires station table entry to exist). |
| */ |
| static void rs_initialize_lq(struct iwl_mvm *mvm, |
| struct ieee80211_sta *sta, |
| struct iwl_lq_sta *lq_sta, |
| enum ieee80211_band band, |
| bool init) |
| { |
| struct iwl_scale_tbl_info *tbl; |
| struct rs_rate *rate; |
| u8 active_tbl = 0; |
| |
| if (!sta || !lq_sta) |
| return; |
| |
| if (!lq_sta->search_better_tbl) |
| active_tbl = lq_sta->active_tbl; |
| else |
| active_tbl = 1 - lq_sta->active_tbl; |
| |
| tbl = &(lq_sta->lq_info[active_tbl]); |
| rate = &tbl->rate; |
| |
| rs_get_initial_rate(mvm, sta, lq_sta, band, rate); |
| rs_init_optimal_rate(mvm, sta, lq_sta); |
| |
| WARN_ON_ONCE(rate->ant != ANT_A && rate->ant != ANT_B); |
| tbl->column = rs_get_column_from_rate(rate); |
| |
| rs_set_expected_tpt_table(lq_sta, tbl); |
| rs_fill_lq_cmd(mvm, sta, lq_sta, rate); |
| /* TODO restore station should remember the lq cmd */ |
| iwl_mvm_send_lq_cmd(mvm, &lq_sta->lq, init); |
| } |
| |
| static void rs_get_rate(void *mvm_r, struct ieee80211_sta *sta, void *mvm_sta, |
| struct ieee80211_tx_rate_control *txrc) |
| { |
| struct sk_buff *skb = txrc->skb; |
| struct iwl_op_mode *op_mode __maybe_unused = |
| (struct iwl_op_mode *)mvm_r; |
| struct iwl_mvm *mvm __maybe_unused = IWL_OP_MODE_GET_MVM(op_mode); |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); |
| struct iwl_lq_sta *lq_sta = mvm_sta; |
| struct rs_rate *optimal_rate; |
| u32 last_ucode_rate; |
| |
| if (sta && !iwl_mvm_sta_from_mac80211(sta)->vif) { |
| /* if vif isn't initialized mvm doesn't know about |
| * this station, so don't do anything with the it |
| */ |
| sta = NULL; |
| mvm_sta = NULL; |
| } |
| |
| /* TODO: handle rate_idx_mask and rate_idx_mcs_mask */ |
| |
| /* Treat uninitialized rate scaling data same as non-existing. */ |
| if (lq_sta && !lq_sta->pers.drv) { |
| IWL_DEBUG_RATE(mvm, "Rate scaling not initialized yet.\n"); |
| mvm_sta = NULL; |
| } |
| |
| /* Send management frames and NO_ACK data using lowest rate. */ |
| if (rate_control_send_low(sta, mvm_sta, txrc)) |
| return; |
| |
| iwl_mvm_hwrate_to_tx_rate(lq_sta->last_rate_n_flags, |
| info->band, &info->control.rates[0]); |
| info->control.rates[0].count = 1; |
| |
| /* Report the optimal rate based on rssi and STA caps if we haven't |
| * converged yet (too little traffic) or exploring other modulations |
| */ |
| if (lq_sta->rs_state != RS_STATE_STAY_IN_COLUMN) { |
| optimal_rate = rs_get_optimal_rate(mvm, lq_sta); |
| last_ucode_rate = ucode_rate_from_rs_rate(mvm, |
| optimal_rate); |
| iwl_mvm_hwrate_to_tx_rate(last_ucode_rate, info->band, |
| &txrc->reported_rate); |
| } |
| } |
| |
| static void *rs_alloc_sta(void *mvm_rate, struct ieee80211_sta *sta, |
| gfp_t gfp) |
| { |
| struct iwl_mvm_sta *sta_priv = iwl_mvm_sta_from_mac80211(sta); |
| struct iwl_op_mode *op_mode = (struct iwl_op_mode *)mvm_rate; |
| struct iwl_mvm *mvm = IWL_OP_MODE_GET_MVM(op_mode); |
| struct iwl_lq_sta *lq_sta = &sta_priv->lq_sta; |
| |
| IWL_DEBUG_RATE(mvm, "create station rate scale window\n"); |
| |
| lq_sta->pers.drv = mvm; |
| #ifdef CONFIG_MAC80211_DEBUGFS |
| lq_sta->pers.dbg_fixed_rate = 0; |
| lq_sta->pers.dbg_fixed_txp_reduction = TPC_INVALID; |
| lq_sta->pers.ss_force = RS_SS_FORCE_NONE; |
| #endif |
| lq_sta->pers.chains = 0; |
| memset(lq_sta->pers.chain_signal, 0, sizeof(lq_sta->pers.chain_signal)); |
| lq_sta->pers.last_rssi = S8_MIN; |
| |
| return &sta_priv->lq_sta; |
| } |
| |
| static int rs_vht_highest_rx_mcs_index(struct ieee80211_sta_vht_cap *vht_cap, |
| int nss) |
| { |
| u16 rx_mcs = le16_to_cpu(vht_cap->vht_mcs.rx_mcs_map) & |
| (0x3 << (2 * (nss - 1))); |
| rx_mcs >>= (2 * (nss - 1)); |
| |
| if (rx_mcs == IEEE80211_VHT_MCS_SUPPORT_0_7) |
| return IWL_RATE_MCS_7_INDEX; |
| else if (rx_mcs == IEEE80211_VHT_MCS_SUPPORT_0_8) |
| return IWL_RATE_MCS_8_INDEX; |
| else if (rx_mcs == IEEE80211_VHT_MCS_SUPPORT_0_9) |
| return IWL_RATE_MCS_9_INDEX; |
| |
| WARN_ON_ONCE(rx_mcs != IEEE80211_VHT_MCS_NOT_SUPPORTED); |
| return -1; |
| } |
| |
| static void rs_vht_set_enabled_rates(struct ieee80211_sta *sta, |
| struct ieee80211_sta_vht_cap *vht_cap, |
| struct iwl_lq_sta *lq_sta) |
| { |
| int i; |
| int highest_mcs = rs_vht_highest_rx_mcs_index(vht_cap, 1); |
| |
| if (highest_mcs >= IWL_RATE_MCS_0_INDEX) { |
| for (i = IWL_RATE_MCS_0_INDEX; i <= highest_mcs; i++) { |
| if (i == IWL_RATE_9M_INDEX) |
| continue; |
| |
| /* VHT MCS9 isn't valid for 20Mhz for NSS=1,2 */ |
| if (i == IWL_RATE_MCS_9_INDEX && |
| sta->bandwidth == IEEE80211_STA_RX_BW_20) |
| continue; |
| |
| lq_sta->active_siso_rate |= BIT(i); |
| } |
| } |
| |
| if (sta->rx_nss < 2) |
| return; |
| |
| highest_mcs = rs_vht_highest_rx_mcs_index(vht_cap, 2); |
| if (highest_mcs >= IWL_RATE_MCS_0_INDEX) { |
| for (i = IWL_RATE_MCS_0_INDEX; i <= highest_mcs; i++) { |
| if (i == IWL_RATE_9M_INDEX) |
| continue; |
| |
| /* VHT MCS9 isn't valid for 20Mhz for NSS=1,2 */ |
| if (i == IWL_RATE_MCS_9_INDEX && |
| sta->bandwidth == IEEE80211_STA_RX_BW_20) |
| continue; |
| |
| lq_sta->active_mimo2_rate |= BIT(i); |
| } |
| } |
| } |
| |
| static void rs_ht_init(struct iwl_mvm *mvm, |
| struct ieee80211_sta *sta, |
| struct iwl_lq_sta *lq_sta, |
| struct ieee80211_sta_ht_cap *ht_cap) |
| { |
| /* active_siso_rate mask includes 9 MBits (bit 5), |
| * and CCK (bits 0-3), supp_rates[] does not; |
| * shift to convert format, force 9 MBits off. |
| */ |
| lq_sta->active_siso_rate = ht_cap->mcs.rx_mask[0] << 1; |
| lq_sta->active_siso_rate |= ht_cap->mcs.rx_mask[0] & 0x1; |
| lq_sta->active_siso_rate &= ~((u16)0x2); |
| lq_sta->active_siso_rate <<= IWL_FIRST_OFDM_RATE; |
| |
| lq_sta->active_mimo2_rate = ht_cap->mcs.rx_mask[1] << 1; |
| lq_sta->active_mimo2_rate |= ht_cap->mcs.rx_mask[1] & 0x1; |
| lq_sta->active_mimo2_rate &= ~((u16)0x2); |
| lq_sta->active_mimo2_rate <<= IWL_FIRST_OFDM_RATE; |
| |
| if (mvm->cfg->ht_params->ldpc && |
| (ht_cap->cap & IEEE80211_HT_CAP_LDPC_CODING)) |
| lq_sta->ldpc = true; |
| |
| if (mvm->cfg->ht_params->stbc && |
| (num_of_ant(iwl_mvm_get_valid_tx_ant(mvm)) > 1) && |
| (ht_cap->cap & IEEE80211_HT_CAP_RX_STBC)) |
| lq_sta->stbc_capable = true; |
| |
| lq_sta->is_vht = false; |
| } |
| |
| static void rs_vht_init(struct iwl_mvm *mvm, |
| struct ieee80211_sta *sta, |
| struct iwl_lq_sta *lq_sta, |
| struct ieee80211_sta_vht_cap *vht_cap) |
| { |
| rs_vht_set_enabled_rates(sta, vht_cap, lq_sta); |
| |
| if (mvm->cfg->ht_params->ldpc && |
| (vht_cap->cap & IEEE80211_VHT_CAP_RXLDPC)) |
| lq_sta->ldpc = true; |
| |
| if (mvm->cfg->ht_params->stbc && |
| (num_of_ant(iwl_mvm_get_valid_tx_ant(mvm)) > 1) && |
| (vht_cap->cap & IEEE80211_VHT_CAP_RXSTBC_MASK)) |
| lq_sta->stbc_capable = true; |
| |
| if (fw_has_capa(&mvm->fw->ucode_capa, IWL_UCODE_TLV_CAPA_BEAMFORMER) && |
| (num_of_ant(iwl_mvm_get_valid_tx_ant(mvm)) > 1) && |
| (vht_cap->cap & IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE)) |
| lq_sta->bfer_capable = true; |
| |
| lq_sta->is_vht = true; |
| } |
| |
| #ifdef CONFIG_IWLWIFI_DEBUGFS |
| static void iwl_mvm_reset_frame_stats(struct iwl_mvm *mvm) |
| { |
| spin_lock_bh(&mvm->drv_stats_lock); |
| memset(&mvm->drv_rx_stats, 0, sizeof(mvm->drv_rx_stats)); |
| spin_unlock_bh(&mvm->drv_stats_lock); |
| } |
| |
| void iwl_mvm_update_frame_stats(struct iwl_mvm *mvm, u32 rate, bool agg) |
| { |
| u8 nss = 0, mcs = 0; |
| |
| spin_lock(&mvm->drv_stats_lock); |
| |
| if (agg) |
| mvm->drv_rx_stats.agg_frames++; |
| |
| mvm->drv_rx_stats.success_frames++; |
| |
| switch (rate & RATE_MCS_CHAN_WIDTH_MSK) { |
| case RATE_MCS_CHAN_WIDTH_20: |
| mvm->drv_rx_stats.bw_20_frames++; |
| break; |
| case RATE_MCS_CHAN_WIDTH_40: |
| mvm->drv_rx_stats.bw_40_frames++; |
| break; |
| case RATE_MCS_CHAN_WIDTH_80: |
| mvm->drv_rx_stats.bw_80_frames++; |
| break; |
| default: |
| WARN_ONCE(1, "bad BW. rate 0x%x", rate); |
| } |
| |
| if (rate & RATE_MCS_HT_MSK) { |
| mvm->drv_rx_stats.ht_frames++; |
| mcs = rate & RATE_HT_MCS_RATE_CODE_MSK; |
| nss = ((rate & RATE_HT_MCS_NSS_MSK) >> RATE_HT_MCS_NSS_POS) + 1; |
| } else if (rate & RATE_MCS_VHT_MSK) { |
| mvm->drv_rx_stats.vht_frames++; |
| mcs = rate & RATE_VHT_MCS_RATE_CODE_MSK; |
| nss = ((rate & RATE_VHT_MCS_NSS_MSK) >> |
| RATE_VHT_MCS_NSS_POS) + 1; |
| } else { |
| mvm->drv_rx_stats.legacy_frames++; |
| } |
| |
| if (nss == 1) |
| mvm->drv_rx_stats.siso_frames++; |
| else if (nss == 2) |
| mvm->drv_rx_stats.mimo2_frames++; |
| |
| if (rate & RATE_MCS_SGI_MSK) |
| mvm->drv_rx_stats.sgi_frames++; |
| else |
| mvm->drv_rx_stats.ngi_frames++; |
| |
| mvm->drv_rx_stats.last_rates[mvm->drv_rx_stats.last_frame_idx] = rate; |
| mvm->drv_rx_stats.last_frame_idx = |
| (mvm->drv_rx_stats.last_frame_idx + 1) % |
| ARRAY_SIZE(mvm->drv_rx_stats.last_rates); |
| |
| spin_unlock(&mvm->drv_stats_lock); |
| } |
| #endif |
| |
| /* |
| * Called after adding a new station to initialize rate scaling |
| */ |
| void iwl_mvm_rs_rate_init(struct iwl_mvm *mvm, struct ieee80211_sta *sta, |
| enum ieee80211_band band, bool init) |
| { |
| int i, j; |
| struct ieee80211_hw *hw = mvm->hw; |
| struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap; |
| struct ieee80211_sta_vht_cap *vht_cap = &sta->vht_cap; |
| struct iwl_mvm_sta *sta_priv = iwl_mvm_sta_from_mac80211(sta); |
| struct iwl_lq_sta *lq_sta = &sta_priv->lq_sta; |
| struct ieee80211_supported_band *sband; |
| unsigned long supp; /* must be unsigned long for for_each_set_bit */ |
| |
| /* clear all non-persistent lq data */ |
| memset(lq_sta, 0, offsetof(typeof(*lq_sta), pers)); |
| |
| sband = hw->wiphy->bands[band]; |
| |
| lq_sta->lq.sta_id = sta_priv->sta_id; |
| |
| for (j = 0; j < LQ_SIZE; j++) |
| rs_rate_scale_clear_tbl_windows(mvm, &lq_sta->lq_info[j]); |
| |
| lq_sta->flush_timer = 0; |
| lq_sta->last_tx = jiffies; |
| |
| IWL_DEBUG_RATE(mvm, |
| "LQ: *** rate scale station global init for station %d ***\n", |
| sta_priv->sta_id); |
| /* TODO: what is a good starting rate for STA? About middle? Maybe not |
| * the lowest or the highest rate.. Could consider using RSSI from |
| * previous packets? Need to have IEEE 802.1X auth succeed immediately |
| * after assoc.. */ |
| |
| lq_sta->missed_rate_counter = IWL_MVM_RS_MISSED_RATE_MAX; |
| lq_sta->band = sband->band; |
| /* |
| * active legacy rates as per supported rates bitmap |
| */ |
| supp = sta->supp_rates[sband->band]; |
| lq_sta->active_legacy_rate = 0; |
| for_each_set_bit(i, &supp, BITS_PER_LONG) |
| lq_sta->active_legacy_rate |= BIT(sband->bitrates[i].hw_value); |
| |
| /* TODO: should probably account for rx_highest for both HT/VHT */ |
| if (!vht_cap || !vht_cap->vht_supported) |
| rs_ht_init(mvm, sta, lq_sta, ht_cap); |
| else |
| rs_vht_init(mvm, sta, lq_sta, vht_cap); |
| |
| lq_sta->max_legacy_rate_idx = |
| rs_get_max_rate_from_mask(lq_sta->active_legacy_rate); |
| lq_sta->max_siso_rate_idx = |
| rs_get_max_rate_from_mask(lq_sta->active_siso_rate); |
| lq_sta->max_mimo2_rate_idx = |
| rs_get_max_rate_from_mask(lq_sta->active_mimo2_rate); |
| |
| IWL_DEBUG_RATE(mvm, |
| "LEGACY=%lX SISO=%lX MIMO2=%lX VHT=%d LDPC=%d STBC=%d BFER=%d\n", |
| lq_sta->active_legacy_rate, |
| lq_sta->active_siso_rate, |
| lq_sta->active_mimo2_rate, |
| lq_sta->is_vht, lq_sta->ldpc, lq_sta->stbc_capable, |
| lq_sta->bfer_capable); |
| IWL_DEBUG_RATE(mvm, "MAX RATE: LEGACY=%d SISO=%d MIMO2=%d\n", |
| lq_sta->max_legacy_rate_idx, |
| lq_sta->max_siso_rate_idx, |
| lq_sta->max_mimo2_rate_idx); |
| |
| /* These values will be overridden later */ |
| lq_sta->lq.single_stream_ant_msk = |
| first_antenna(iwl_mvm_get_valid_tx_ant(mvm)); |
| lq_sta->lq.dual_stream_ant_msk = ANT_AB; |
| |
| /* as default allow aggregation for all tids */ |
| lq_sta->tx_agg_tid_en = IWL_AGG_ALL_TID; |
| lq_sta->is_agg = 0; |
| #ifdef CONFIG_IWLWIFI_DEBUGFS |
| iwl_mvm_reset_frame_stats(mvm); |
| #endif |
| rs_initialize_lq(mvm, sta, lq_sta, band, init); |
| } |
| |
| static void rs_rate_update(void *mvm_r, |
| struct ieee80211_supported_band *sband, |
| struct cfg80211_chan_def *chandef, |
| struct ieee80211_sta *sta, void *priv_sta, |
| u32 changed) |
| { |
| u8 tid; |
| struct iwl_op_mode *op_mode = |
| (struct iwl_op_mode *)mvm_r; |
| struct iwl_mvm *mvm = IWL_OP_MODE_GET_MVM(op_mode); |
| |
| if (!iwl_mvm_sta_from_mac80211(sta)->vif) |
| return; |
| |
| /* Stop any ongoing aggregations as rs starts off assuming no agg */ |
| for (tid = 0; tid < IWL_MAX_TID_COUNT; tid++) |
| ieee80211_stop_tx_ba_session(sta, tid); |
| |
| iwl_mvm_rs_rate_init(mvm, sta, sband->band, false); |
| } |
| |
| #ifdef CONFIG_MAC80211_DEBUGFS |
| static void rs_build_rates_table_from_fixed(struct iwl_mvm *mvm, |
| struct iwl_lq_cmd *lq_cmd, |
| enum ieee80211_band band, |
| u32 ucode_rate) |
| { |
| struct rs_rate rate; |
| int i; |
| int num_rates = ARRAY_SIZE(lq_cmd->rs_table); |
| __le32 ucode_rate_le32 = cpu_to_le32(ucode_rate); |
| u8 ant = (ucode_rate & RATE_MCS_ANT_ABC_MSK) >> RATE_MCS_ANT_POS; |
| |
| for (i = 0; i < num_rates; i++) |
| lq_cmd->rs_table[i] = ucode_rate_le32; |
| |
| rs_rate_from_ucode_rate(ucode_rate, band, &rate); |
| |
| if (is_mimo(&rate)) |
| lq_cmd->mimo_delim = num_rates - 1; |
| else |
| lq_cmd->mimo_delim = 0; |
| |
| lq_cmd->reduced_tpc = 0; |
| |
| if (num_of_ant(ant) == 1) |
| lq_cmd->single_stream_ant_msk = ant; |
| |
| lq_cmd->agg_frame_cnt_limit = LINK_QUAL_AGG_FRAME_LIMIT_DEF; |
| } |
| #endif /* CONFIG_MAC80211_DEBUGFS */ |
| |
| static void rs_fill_rates_for_column(struct iwl_mvm *mvm, |
| struct iwl_lq_sta *lq_sta, |
| struct rs_rate *rate, |
| __le32 *rs_table, int *rs_table_index, |
| int num_rates, int num_retries, |
| u8 valid_tx_ant, bool toggle_ant) |
| { |
| int i, j; |
| __le32 ucode_rate; |
| bool bottom_reached = false; |
| int prev_rate_idx = rate->index; |
| int end = LINK_QUAL_MAX_RETRY_NUM; |
| int index = *rs_table_index; |
| |
| for (i = 0; i < num_rates && index < end; i++) { |
| for (j = 0; j < num_retries && index < end; j++, index++) { |
| ucode_rate = cpu_to_le32(ucode_rate_from_rs_rate(mvm, |
| rate)); |
| rs_table[index] = ucode_rate; |
| if (toggle_ant) |
| rs_toggle_antenna(valid_tx_ant, rate); |
| } |
| |
| prev_rate_idx = rate->index; |
| bottom_reached = rs_get_lower_rate_in_column(lq_sta, rate); |
| if (bottom_reached && !is_legacy(rate)) |
| break; |
| } |
| |
| if (!bottom_reached && !is_legacy(rate)) |
| rate->index = prev_rate_idx; |
| |
| *rs_table_index = index; |
| } |
| |
| /* Building the rate table is non trivial. When we're in MIMO2/VHT/80Mhz/SGI |
| * column the rate table should look like this: |
| * |
| * rate[0] 0x400D019 VHT | ANT: AB BW: 80Mhz MCS: 9 NSS: 2 SGI |
| * rate[1] 0x400D019 VHT | ANT: AB BW: 80Mhz MCS: 9 NSS: 2 SGI |
| * rate[2] 0x400D018 VHT | ANT: AB BW: 80Mhz MCS: 8 NSS: 2 SGI |
| * rate[3] 0x400D018 VHT | ANT: AB BW: 80Mhz MCS: 8 NSS: 2 SGI |
| * rate[4] 0x400D017 VHT | ANT: AB BW: 80Mhz MCS: 7 NSS: 2 SGI |
| * rate[5] 0x400D017 VHT | ANT: AB BW: 80Mhz MCS: 7 NSS: 2 SGI |
| * rate[6] 0x4005007 VHT | ANT: A BW: 80Mhz MCS: 7 NSS: 1 NGI |
| * rate[7] 0x4009006 VHT | ANT: B BW: 80Mhz MCS: 6 NSS: 1 NGI |
| * rate[8] 0x4005005 VHT | ANT: A BW: 80Mhz MCS: 5 NSS: 1 NGI |
| * rate[9] 0x800B Legacy | ANT: B Rate: 36 Mbps |
| * rate[10] 0x4009 Legacy | ANT: A Rate: 24 Mbps |
| * rate[11] 0x8007 Legacy | ANT: B Rate: 18 Mbps |
| * rate[12] 0x4005 Legacy | ANT: A Rate: 12 Mbps |
| * rate[13] 0x800F Legacy | ANT: B Rate: 9 Mbps |
| * rate[14] 0x400D Legacy | ANT: A Rate: 6 Mbps |
| * rate[15] 0x800D Legacy | ANT: B Rate: 6 Mbps |
| */ |
| static void rs_build_rates_table(struct iwl_mvm *mvm, |
| struct ieee80211_sta *sta, |
| struct iwl_lq_sta *lq_sta, |
| const struct rs_rate *initial_rate) |
| { |
| struct rs_rate rate; |
| int num_rates, num_retries, index = 0; |
| u8 valid_tx_ant = 0; |
| struct iwl_lq_cmd *lq_cmd = &lq_sta->lq; |
| bool toggle_ant = false; |
| |
| memcpy(&rate, initial_rate, sizeof(rate)); |
| |
| valid_tx_ant = iwl_mvm_get_valid_tx_ant(mvm); |
| |
| /* TODO: remove old API when min FW API hits 14 */ |
| if (!fw_has_api(&mvm->fw->ucode_capa, IWL_UCODE_TLV_API_LQ_SS_PARAMS) && |
| rs_stbc_allow(mvm, sta, lq_sta)) |
| rate.stbc = true; |
| |
| if (is_siso(&rate)) { |
| num_rates = IWL_MVM_RS_INITIAL_SISO_NUM_RATES; |
| num_retries = IWL_MVM_RS_HT_VHT_RETRIES_PER_RATE; |
| } else if (is_mimo(&rate)) { |
| num_rates = IWL_MVM_RS_INITIAL_MIMO_NUM_RATES; |
| num_retries = IWL_MVM_RS_HT_VHT_RETRIES_PER_RATE; |
| } else { |
| num_rates = IWL_MVM_RS_INITIAL_LEGACY_NUM_RATES; |
| num_retries = IWL_MVM_RS_INITIAL_LEGACY_RETRIES; |
| toggle_ant = true; |
| } |
| |
| rs_fill_rates_for_column(mvm, lq_sta, &rate, lq_cmd->rs_table, &index, |
| num_rates, num_retries, valid_tx_ant, |
| toggle_ant); |
| |
| rs_get_lower_rate_down_column(lq_sta, &rate); |
| |
| if (is_siso(&rate)) { |
| num_rates = IWL_MVM_RS_SECONDARY_SISO_NUM_RATES; |
| num_retries = IWL_MVM_RS_SECONDARY_SISO_RETRIES; |
| lq_cmd->mimo_delim = index; |
| } else if (is_legacy(&rate)) { |
| num_rates = IWL_MVM_RS_SECONDARY_LEGACY_NUM_RATES; |
| num_retries = IWL_MVM_RS_SECONDARY_LEGACY_RETRIES; |
| } else { |
| WARN_ON_ONCE(1); |
| } |
| |
| toggle_ant = true; |
| |
| rs_fill_rates_for_column(mvm, lq_sta, &rate, lq_cmd->rs_table, &index, |
| num_rates, num_retries, valid_tx_ant, |
| toggle_ant); |
| |
| rs_get_lower_rate_down_column(lq_sta, &rate); |
| |
| num_rates = IWL_MVM_RS_SECONDARY_LEGACY_NUM_RATES; |
| num_retries = IWL_MVM_RS_SECONDARY_LEGACY_RETRIES; |
| |
| rs_fill_rates_for_column(mvm, lq_sta, &rate, lq_cmd->rs_table, &index, |
| num_rates, num_retries, valid_tx_ant, |
| toggle_ant); |
| |
| } |
| |
| struct rs_bfer_active_iter_data { |
| struct ieee80211_sta *exclude_sta; |
| struct iwl_mvm_sta *bfer_mvmsta; |
| }; |
| |
| static void rs_bfer_active_iter(void *_data, |
| struct ieee80211_sta *sta) |
| { |
| struct rs_bfer_active_iter_data *data = _data; |
| struct iwl_mvm_sta *mvmsta = iwl_mvm_sta_from_mac80211(sta); |
| struct iwl_lq_cmd *lq_cmd = &mvmsta->lq_sta.lq; |
| u32 ss_params = le32_to_cpu(lq_cmd->ss_params); |
| |
| if (sta == data->exclude_sta) |
| return; |
| |
| /* The current sta has BFER allowed */ |
| if (ss_params & LQ_SS_BFER_ALLOWED) { |
| WARN_ON_ONCE(data->bfer_mvmsta != NULL); |
| |
| data->bfer_mvmsta = mvmsta; |
| } |
| } |
| |
| static int rs_bfer_priority(struct iwl_mvm_sta *sta) |
| { |
| int prio = -1; |
| enum nl80211_iftype viftype = ieee80211_vif_type_p2p(sta->vif); |
| |
| switch (viftype) { |
| case NL80211_IFTYPE_AP: |
| case NL80211_IFTYPE_P2P_GO: |
| prio = 3; |
| break; |
| case NL80211_IFTYPE_P2P_CLIENT: |
| prio = 2; |
| break; |
| case NL80211_IFTYPE_STATION: |
| prio = 1; |
| break; |
| default: |
| WARN_ONCE(true, "viftype %d sta_id %d", viftype, sta->sta_id); |
| prio = -1; |
| } |
| |
| return prio; |
| } |
| |
| /* Returns >0 if sta1 has a higher BFER priority compared to sta2 */ |
| static int rs_bfer_priority_cmp(struct iwl_mvm_sta *sta1, |
| struct iwl_mvm_sta *sta2) |
| { |
| int prio1 = rs_bfer_priority(sta1); |
| int prio2 = rs_bfer_priority(sta2); |
| |
| if (prio1 > prio2) |
| return 1; |
| if (prio1 < prio2) |
| return -1; |
| return 0; |
| } |
| |
| static void rs_set_lq_ss_params(struct iwl_mvm *mvm, |
| struct ieee80211_sta *sta, |
| struct iwl_lq_sta *lq_sta, |
| const struct rs_rate *initial_rate) |
| { |
| struct iwl_lq_cmd *lq_cmd = &lq_sta->lq; |
| struct iwl_mvm_sta *mvmsta = iwl_mvm_sta_from_mac80211(sta); |
| struct rs_bfer_active_iter_data data = { |
| .exclude_sta = sta, |
| .bfer_mvmsta = NULL, |
| }; |
| struct iwl_mvm_sta *bfer_mvmsta = NULL; |
| u32 ss_params = LQ_SS_PARAMS_VALID; |
| |
| if (!iwl_mvm_bt_coex_is_mimo_allowed(mvm, sta)) |
| goto out; |
| |
| #ifdef CONFIG_MAC80211_DEBUGFS |
| /* Check if forcing the decision is configured. |
| * Note that SISO is forced by not allowing STBC or BFER |
| */ |
| if (lq_sta->pers.ss_force == RS_SS_FORCE_STBC) |
| ss_params |= (LQ_SS_STBC_1SS_ALLOWED | LQ_SS_FORCE); |
| else if (lq_sta->pers.ss_force == RS_SS_FORCE_BFER) |
| ss_params |= (LQ_SS_BFER_ALLOWED | LQ_SS_FORCE); |
| |
| if (lq_sta->pers.ss_force != RS_SS_FORCE_NONE) { |
| IWL_DEBUG_RATE(mvm, "Forcing single stream Tx decision %d\n", |
| lq_sta->pers.ss_force); |
| goto out; |
| } |
| #endif |
| |
| if (lq_sta->stbc_capable) |
| ss_params |= LQ_SS_STBC_1SS_ALLOWED; |
| |
| if (!lq_sta->bfer_capable) |
| goto out; |
| |
| ieee80211_iterate_stations_atomic(mvm->hw, |
| rs_bfer_active_iter, |
| &data); |
| bfer_mvmsta = data.bfer_mvmsta; |
| |
| /* This code is safe as it doesn't run concurrently for different |
| * stations. This is guaranteed by the fact that calls to |
| * ieee80211_tx_status wouldn't run concurrently for a single HW. |
| */ |
| if (!bfer_mvmsta) { |
| IWL_DEBUG_RATE(mvm, "No sta with BFER allowed found. Allow\n"); |
| |
| ss_params |= LQ_SS_BFER_ALLOWED; |
| goto out; |
| } |
| |
| IWL_DEBUG_RATE(mvm, "Found existing sta %d with BFER activated\n", |
| bfer_mvmsta->sta_id); |
| |
| /* Disallow BFER on another STA if active and we're a higher priority */ |
| if (rs_bfer_priority_cmp(mvmsta, bfer_mvmsta) > 0) { |
| struct iwl_lq_cmd *bfersta_lq_cmd = &bfer_mvmsta->lq_sta.lq; |
| u32 bfersta_ss_params = le32_to_cpu(bfersta_lq_cmd->ss_params); |
| |
| bfersta_ss_params &= ~LQ_SS_BFER_ALLOWED; |
| bfersta_lq_cmd->ss_params = cpu_to_le32(bfersta_ss_params); |
| iwl_mvm_send_lq_cmd(mvm, bfersta_lq_cmd, false); |
| |
| ss_params |= LQ_SS_BFER_ALLOWED; |
| IWL_DEBUG_RATE(mvm, |
| "Lower priority BFER sta found (%d). Switch BFER\n", |
| bfer_mvmsta->sta_id); |
| } |
| out: |
| lq_cmd->ss_params = cpu_to_le32(ss_params); |
| } |
| |
| static void rs_fill_lq_cmd(struct iwl_mvm *mvm, |
| struct ieee80211_sta *sta, |
| struct iwl_lq_sta *lq_sta, |
| const struct rs_rate *initial_rate) |
| { |
| struct iwl_lq_cmd *lq_cmd = &lq_sta->lq; |
| struct iwl_mvm_sta *mvmsta; |
| struct iwl_mvm_vif *mvmvif; |
| |
| lq_cmd->agg_disable_start_th = IWL_MVM_RS_AGG_DISABLE_START; |
| lq_cmd->agg_time_limit = |
| cpu_to_le16(IWL_MVM_RS_AGG_TIME_LIMIT); |
| |
| #ifdef CONFIG_MAC80211_DEBUGFS |
| if (lq_sta->pers.dbg_fixed_rate) { |
| rs_build_rates_table_from_fixed(mvm, lq_cmd, |
| lq_sta->band, |
| lq_sta->pers.dbg_fixed_rate); |
| return; |
| } |
| #endif |
| if (WARN_ON_ONCE(!sta || !initial_rate)) |
| return; |
| |
| rs_build_rates_table(mvm, sta, lq_sta, initial_rate); |
| |
| if (fw_has_api(&mvm->fw->ucode_capa, IWL_UCODE_TLV_API_LQ_SS_PARAMS)) |
| rs_set_lq_ss_params(mvm, sta, lq_sta, initial_rate); |
| |
| mvmsta = iwl_mvm_sta_from_mac80211(sta); |
| mvmvif = iwl_mvm_vif_from_mac80211(mvmsta->vif); |
| |
| if (num_of_ant(initial_rate->ant) == 1) |
| lq_cmd->single_stream_ant_msk = initial_rate->ant; |
| |
| lq_cmd->agg_frame_cnt_limit = mvmsta->max_agg_bufsize; |
| |
| /* |
| * In case of low latency, tell the firmware to leave a frame in the |
| * Tx Fifo so that it can start a transaction in the same TxOP. This |
| * basically allows the firmware to send bursts. |
| */ |
| if (iwl_mvm_vif_low_latency(mvmvif)) |
| lq_cmd->agg_frame_cnt_limit--; |
| |
| if (mvmsta->vif->p2p) |
| lq_cmd->flags |= LQ_FLAG_USE_RTS_MSK; |
| |
| lq_cmd->agg_time_limit = |
| cpu_to_le16(iwl_mvm_coex_agg_time_limit(mvm, sta)); |
| } |
| |
| static void *rs_alloc(struct ieee80211_hw *hw, struct dentry *debugfsdir) |
| { |
| return hw->priv; |
| } |
| /* rate scale requires free function to be implemented */ |
| static void rs_free(void *mvm_rate) |
| { |
| return; |
| } |
| |
| static void rs_free_sta(void *mvm_r, struct ieee80211_sta *sta, |
| void *mvm_sta) |
| { |
| struct iwl_op_mode *op_mode __maybe_unused = mvm_r; |
| struct iwl_mvm *mvm __maybe_unused = IWL_OP_MODE_GET_MVM(op_mode); |
| |
| IWL_DEBUG_RATE(mvm, "enter\n"); |
| IWL_DEBUG_RATE(mvm, "leave\n"); |
| } |
| |
| #ifdef CONFIG_MAC80211_DEBUGFS |
| int rs_pretty_print_rate(char *buf, const u32 rate) |
| { |
| |
| char *type, *bw; |
| u8 mcs = 0, nss = 0; |
| u8 ant = (rate & RATE_MCS_ANT_ABC_MSK) >> RATE_MCS_ANT_POS; |
| |
| if (!(rate & RATE_MCS_HT_MSK) && |
| !(rate & RATE_MCS_VHT_MSK)) { |
| int index = iwl_hwrate_to_plcp_idx(rate); |
| |
| return sprintf(buf, "Legacy | ANT: %s Rate: %s Mbps\n", |
| rs_pretty_ant(ant), |
| index == IWL_RATE_INVALID ? "BAD" : |
| iwl_rate_mcs[index].mbps); |
| } |
| |
| if (rate & RATE_MCS_VHT_MSK) { |
| type = "VHT"; |
| mcs = rate & RATE_VHT_MCS_RATE_CODE_MSK; |
| nss = ((rate & RATE_VHT_MCS_NSS_MSK) |
| >> RATE_VHT_MCS_NSS_POS) + 1; |
| } else if (rate & RATE_MCS_HT_MSK) { |
| type = "HT"; |
| mcs = rate & RATE_HT_MCS_INDEX_MSK; |
| } else { |
| type = "Unknown"; /* shouldn't happen */ |
| } |
| |
| switch (rate & RATE_MCS_CHAN_WIDTH_MSK) { |
| case RATE_MCS_CHAN_WIDTH_20: |
| bw = "20Mhz"; |
| break; |
| case RATE_MCS_CHAN_WIDTH_40: |
| bw = "40Mhz"; |
| break; |
| case RATE_MCS_CHAN_WIDTH_80: |
| bw = "80Mhz"; |
| break; |
| case RATE_MCS_CHAN_WIDTH_160: |
| bw = "160Mhz"; |
| break; |
| default: |
| bw = "BAD BW"; |
| } |
| |
| return sprintf(buf, "%s | ANT: %s BW: %s MCS: %d NSS: %d %s%s%s%s%s\n", |
| type, rs_pretty_ant(ant), bw, mcs, nss, |
| (rate & RATE_MCS_SGI_MSK) ? "SGI " : "NGI ", |
| (rate & RATE_MCS_HT_STBC_MSK) ? "STBC " : "", |
| (rate & RATE_MCS_LDPC_MSK) ? "LDPC " : "", |
| (rate & RATE_MCS_BF_MSK) ? "BF " : "", |
| (rate & RATE_MCS_ZLF_MSK) ? "ZLF " : ""); |
| } |
| |
| /** |
| * Program the device to use fixed rate for frame transmit |
| * This is for debugging/testing only |
| * once the device start use fixed rate, we need to reload the module |
| * to being back the normal operation. |
| */ |
| static void rs_program_fix_rate(struct iwl_mvm *mvm, |
| struct iwl_lq_sta *lq_sta) |
| { |
| lq_sta->active_legacy_rate = 0x0FFF; /* 1 - 54 MBits, includes CCK */ |
| lq_sta->active_siso_rate = 0x1FD0; /* 6 - 60 MBits, no 9, no CCK */ |
| lq_sta->active_mimo2_rate = 0x1FD0; /* 6 - 60 MBits, no 9, no CCK */ |
| |
| IWL_DEBUG_RATE(mvm, "sta_id %d rate 0x%X\n", |
| lq_sta->lq.sta_id, lq_sta->pers.dbg_fixed_rate); |
| |
| if (lq_sta->pers.dbg_fixed_rate) { |
| rs_fill_lq_cmd(mvm, NULL, lq_sta, NULL); |
| iwl_mvm_send_lq_cmd(lq_sta->pers.drv, &lq_sta->lq, false); |
| } |
| } |
| |
| static ssize_t rs_sta_dbgfs_scale_table_write(struct file *file, |
| const char __user *user_buf, size_t count, loff_t *ppos) |
| { |
| struct iwl_lq_sta *lq_sta = file->private_data; |
| struct iwl_mvm *mvm; |
| char buf[64]; |
| size_t buf_size; |
| u32 parsed_rate; |
| |
| mvm = lq_sta->pers.drv; |
| memset(buf, 0, sizeof(buf)); |
| buf_size = min(count, sizeof(buf) - 1); |
| if (copy_from_user(buf, user_buf, buf_size)) |
| return -EFAULT; |
| |
| if (sscanf(buf, "%x", &parsed_rate) == 1) |
| lq_sta->pers.dbg_fixed_rate = parsed_rate; |
| else |
| lq_sta->pers.dbg_fixed_rate = 0; |
| |
| rs_program_fix_rate(mvm, lq_sta); |
| |
| return count; |
| } |
| |
| static ssize_t rs_sta_dbgfs_scale_table_read(struct file *file, |
| char __user *user_buf, size_t count, loff_t *ppos) |
| { |
| char *buff; |
| int desc = 0; |
| int i = 0; |
| ssize_t ret; |
| |
| struct iwl_lq_sta *lq_sta = file->private_data; |
| struct iwl_mvm *mvm; |
| struct iwl_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); |
| struct rs_rate *rate = &tbl->rate; |
| u32 ss_params; |
| mvm = lq_sta->pers.drv; |
| buff = kmalloc(2048, GFP_KERNEL); |
| if (!buff) |
| return -ENOMEM; |
| |
| desc += sprintf(buff+desc, "sta_id %d\n", lq_sta->lq.sta_id); |
| desc += sprintf(buff+desc, "failed=%d success=%d rate=0%lX\n", |
| lq_sta->total_failed, lq_sta->total_success, |
| lq_sta->active_legacy_rate); |
| desc += sprintf(buff+desc, "fixed rate 0x%X\n", |
| lq_sta->pers.dbg_fixed_rate); |
| desc += sprintf(buff+desc, "valid_tx_ant %s%s%s\n", |
| (iwl_mvm_get_valid_tx_ant(mvm) & ANT_A) ? "ANT_A," : "", |
| (iwl_mvm_get_valid_tx_ant(mvm) & ANT_B) ? "ANT_B," : "", |
| (iwl_mvm_get_valid_tx_ant(mvm) & ANT_C) ? "ANT_C" : ""); |
| desc += sprintf(buff+desc, "lq type %s\n", |
| (is_legacy(rate)) ? "legacy" : |
| is_vht(rate) ? "VHT" : "HT"); |
| if (!is_legacy(rate)) { |
| desc += sprintf(buff + desc, " %s", |
| (is_siso(rate)) ? "SISO" : "MIMO2"); |
| desc += sprintf(buff + desc, " %s", |
| (is_ht20(rate)) ? "20MHz" : |
| (is_ht40(rate)) ? "40MHz" : |
| (is_ht80(rate)) ? "80Mhz" : "BAD BW"); |
| desc += sprintf(buff + desc, " %s %s %s\n", |
| (rate->sgi) ? "SGI" : "NGI", |
| (rate->ldpc) ? "LDPC" : "BCC", |
| (lq_sta->is_agg) ? "AGG on" : ""); |
| } |
| desc += sprintf(buff+desc, "last tx rate=0x%X\n", |
| lq_sta->last_rate_n_flags); |
| desc += sprintf(buff+desc, |
| "general: flags=0x%X mimo-d=%d s-ant=0x%x d-ant=0x%x\n", |
| lq_sta->lq.flags, |
| lq_sta->lq.mimo_delim, |
| lq_sta->lq.single_stream_ant_msk, |
| lq_sta->lq.dual_stream_ant_msk); |
| |
| desc += sprintf(buff+desc, |
| "agg: time_limit=%d dist_start_th=%d frame_cnt_limit=%d\n", |
| le16_to_cpu(lq_sta->lq.agg_time_limit), |
| lq_sta->lq.agg_disable_start_th, |
| lq_sta->lq.agg_frame_cnt_limit); |
| |
| desc += sprintf(buff+desc, "reduced tpc=%d\n", lq_sta->lq.reduced_tpc); |
| ss_params = le32_to_cpu(lq_sta->lq.ss_params); |
| desc += sprintf(buff+desc, "single stream params: %s%s%s%s\n", |
| (ss_params & LQ_SS_PARAMS_VALID) ? |
| "VALID" : "INVALID", |
| (ss_params & LQ_SS_BFER_ALLOWED) ? |
| ", BFER" : "", |
| (ss_params & LQ_SS_STBC_1SS_ALLOWED) ? |
| ", STBC" : "", |
| (ss_params & LQ_SS_FORCE) ? |
| ", FORCE" : ""); |
| desc += sprintf(buff+desc, |
| "Start idx [0]=0x%x [1]=0x%x [2]=0x%x [3]=0x%x\n", |
| lq_sta->lq.initial_rate_index[0], |
| lq_sta->lq.initial_rate_index[1], |
| lq_sta->lq.initial_rate_index[2], |
| lq_sta->lq.initial_rate_index[3]); |
| |
| for (i = 0; i < LINK_QUAL_MAX_RETRY_NUM; i++) { |
| u32 r = le32_to_cpu(lq_sta->lq.rs_table[i]); |
| |
| desc += sprintf(buff+desc, " rate[%d] 0x%X ", i, r); |
| desc += rs_pretty_print_rate(buff+desc, r); |
| } |
| |
| ret = simple_read_from_buffer(user_buf, count, ppos, buff, desc); |
| kfree(buff); |
| return ret; |
| } |
| |
| static const struct file_operations rs_sta_dbgfs_scale_table_ops = { |
| .write = rs_sta_dbgfs_scale_table_write, |
| .read = rs_sta_dbgfs_scale_table_read, |
| .open = simple_open, |
| .llseek = default_llseek, |
| }; |
| static ssize_t rs_sta_dbgfs_stats_table_read(struct file *file, |
| char __user *user_buf, size_t count, loff_t *ppos) |
| { |
| char *buff; |
| int desc = 0; |
| int i, j; |
| ssize_t ret; |
| struct iwl_scale_tbl_info *tbl; |
| struct rs_rate *rate; |
| struct iwl_lq_sta *lq_sta = file->private_data; |
| |
| buff = kmalloc(1024, GFP_KERNEL); |
| if (!buff) |
| return -ENOMEM; |
| |
| for (i = 0; i < LQ_SIZE; i++) { |
| tbl = &(lq_sta->lq_info[i]); |
| rate = &tbl->rate; |
| desc += sprintf(buff+desc, |
| "%s type=%d SGI=%d BW=%s DUP=0\n" |
| "index=%d\n", |
| lq_sta->active_tbl == i ? "*" : "x", |
| rate->type, |
| rate->sgi, |
| is_ht20(rate) ? "20Mhz" : |
| is_ht40(rate) ? "40Mhz" : |
| is_ht80(rate) ? "80Mhz" : "ERR", |
| rate->index); |
| for (j = 0; j < IWL_RATE_COUNT; j++) { |
| desc += sprintf(buff+desc, |
| "counter=%d success=%d %%=%d\n", |
| tbl->win[j].counter, |
| tbl->win[j].success_counter, |
| tbl->win[j].success_ratio); |
| } |
| } |
| ret = simple_read_from_buffer(user_buf, count, ppos, buff, desc); |
| kfree(buff); |
| return ret; |
| } |
| |
| static const struct file_operations rs_sta_dbgfs_stats_table_ops = { |
| .read = rs_sta_dbgfs_stats_table_read, |
| .open = simple_open, |
| .llseek = default_llseek, |
| }; |
| |
| static ssize_t rs_sta_dbgfs_drv_tx_stats_read(struct file *file, |
| char __user *user_buf, |
| size_t count, loff_t *ppos) |
| { |
| static const char * const column_name[] = { |
| [RS_COLUMN_LEGACY_ANT_A] = "LEGACY_ANT_A", |
| [RS_COLUMN_LEGACY_ANT_B] = "LEGACY_ANT_B", |
| [RS_COLUMN_SISO_ANT_A] = "SISO_ANT_A", |
| [RS_COLUMN_SISO_ANT_B] = "SISO_ANT_B", |
| [RS_COLUMN_SISO_ANT_A_SGI] = "SISO_ANT_A_SGI", |
| [RS_COLUMN_SISO_ANT_B_SGI] = "SISO_ANT_B_SGI", |
| [RS_COLUMN_MIMO2] = "MIMO2", |
| [RS_COLUMN_MIMO2_SGI] = "MIMO2_SGI", |
| }; |
| |
| static const char * const rate_name[] = { |
| [IWL_RATE_1M_INDEX] = "1M", |
| [IWL_RATE_2M_INDEX] = "2M", |
| [IWL_RATE_5M_INDEX] = "5.5M", |
| [IWL_RATE_11M_INDEX] = "11M", |
| [IWL_RATE_6M_INDEX] = "6M|MCS0", |
| [IWL_RATE_9M_INDEX] = "9M", |
| [IWL_RATE_12M_INDEX] = "12M|MCS1", |
| [IWL_RATE_18M_INDEX] = "18M|MCS2", |
| [IWL_RATE_24M_INDEX] = "24M|MCS3", |
| [IWL_RATE_36M_INDEX] = "36M|MCS4", |
| [IWL_RATE_48M_INDEX] = "48M|MCS5", |
| [IWL_RATE_54M_INDEX] = "54M|MCS6", |
| [IWL_RATE_MCS_7_INDEX] = "MCS7", |
| [IWL_RATE_MCS_8_INDEX] = "MCS8", |
| [IWL_RATE_MCS_9_INDEX] = "MCS9", |
| }; |
| |
| char *buff, *pos, *endpos; |
| int col, rate; |
| ssize_t ret; |
| struct iwl_lq_sta *lq_sta = file->private_data; |
| struct rs_rate_stats *stats; |
| static const size_t bufsz = 1024; |
| |
| buff = kmalloc(bufsz, GFP_KERNEL); |
| if (!buff) |
| return -ENOMEM; |
| |
| pos = buff; |
| endpos = pos + bufsz; |
| |
| pos += scnprintf(pos, endpos - pos, "COLUMN,"); |
| for (rate = 0; rate < IWL_RATE_COUNT; rate++) |
| pos += scnprintf(pos, endpos - pos, "%s,", rate_name[rate]); |
| pos += scnprintf(pos, endpos - pos, "\n"); |
| |
| for (col = 0; col < RS_COLUMN_COUNT; col++) { |
| pos += scnprintf(pos, endpos - pos, |
| "%s,", column_name[col]); |
| |
| for (rate = 0; rate < IWL_RATE_COUNT; rate++) { |
| stats = &(lq_sta->pers.tx_stats[col][rate]); |
| pos += scnprintf(pos, endpos - pos, |
| "%llu/%llu,", |
| stats->success, |
| stats->total); |
| } |
| pos += scnprintf(pos, endpos - pos, "\n"); |
| } |
| |
| ret = simple_read_from_buffer(user_buf, count, ppos, buff, pos - buff); |
| kfree(buff); |
| return ret; |
| } |
| |
| static ssize_t rs_sta_dbgfs_drv_tx_stats_write(struct file *file, |
| const char __user *user_buf, |
| size_t count, loff_t *ppos) |
| { |
| struct iwl_lq_sta *lq_sta = file->private_data; |
| memset(lq_sta->pers.tx_stats, 0, sizeof(lq_sta->pers.tx_stats)); |
| |
| return count; |
| } |
| |
| static const struct file_operations rs_sta_dbgfs_drv_tx_stats_ops = { |
| .read = rs_sta_dbgfs_drv_tx_stats_read, |
| .write = rs_sta_dbgfs_drv_tx_stats_write, |
| .open = simple_open, |
| .llseek = default_llseek, |
| }; |
| |
| static ssize_t iwl_dbgfs_ss_force_read(struct file *file, |
| char __user *user_buf, |
| size_t count, loff_t *ppos) |
| { |
| struct iwl_lq_sta *lq_sta = file->private_data; |
| char buf[12]; |
| int bufsz = sizeof(buf); |
| int pos = 0; |
| static const char * const ss_force_name[] = { |
| [RS_SS_FORCE_NONE] = "none", |
| [RS_SS_FORCE_STBC] = "stbc", |
| [RS_SS_FORCE_BFER] = "bfer", |
| [RS_SS_FORCE_SISO] = "siso", |
| }; |
| |
| pos += scnprintf(buf+pos, bufsz-pos, "%s\n", |
| ss_force_name[lq_sta->pers.ss_force]); |
| return simple_read_from_buffer(user_buf, count, ppos, buf, pos); |
| } |
| |
| static ssize_t iwl_dbgfs_ss_force_write(struct iwl_lq_sta *lq_sta, char *buf, |
| size_t count, loff_t *ppos) |
| { |
| struct iwl_mvm *mvm = lq_sta->pers.drv; |
| int ret = 0; |
| |
| if (!strncmp("none", buf, 4)) { |
| lq_sta->pers.ss_force = RS_SS_FORCE_NONE; |
| } else if (!strncmp("siso", buf, 4)) { |
| lq_sta->pers.ss_force = RS_SS_FORCE_SISO; |
| } else if (!strncmp("stbc", buf, 4)) { |
| if (lq_sta->stbc_capable) { |
| lq_sta->pers.ss_force = RS_SS_FORCE_STBC; |
| } else { |
| IWL_ERR(mvm, |
| "can't force STBC. peer doesn't support\n"); |
| ret = -EINVAL; |
| } |
| } else if (!strncmp("bfer", buf, 4)) { |
| if (lq_sta->bfer_capable) { |
| lq_sta->pers.ss_force = RS_SS_FORCE_BFER; |
| } else { |
| IWL_ERR(mvm, |
| "can't force BFER. peer doesn't support\n"); |
| ret = -EINVAL; |
| } |
| } else { |
| IWL_ERR(mvm, "valid values none|siso|stbc|bfer\n"); |
| ret = -EINVAL; |
| } |
| return ret ?: count; |
| } |
| |
| #define MVM_DEBUGFS_READ_WRITE_FILE_OPS(name, bufsz) \ |
| _MVM_DEBUGFS_READ_WRITE_FILE_OPS(name, bufsz, struct iwl_lq_sta) |
| #define MVM_DEBUGFS_ADD_FILE_RS(name, parent, mode) do { \ |
| if (!debugfs_create_file(#name, mode, parent, lq_sta, \ |
| &iwl_dbgfs_##name##_ops)) \ |
| goto err; \ |
| } while (0) |
| |
| MVM_DEBUGFS_READ_WRITE_FILE_OPS(ss_force, 32); |
| |
| static void rs_add_debugfs(void *mvm, void *priv_sta, struct dentry *dir) |
| { |
| struct iwl_lq_sta *lq_sta = priv_sta; |
| struct iwl_mvm_sta *mvmsta; |
| |
| mvmsta = container_of(lq_sta, struct iwl_mvm_sta, lq_sta); |
| |
| if (!mvmsta->vif) |
| return; |
| |
| debugfs_create_file("rate_scale_table", S_IRUSR | S_IWUSR, dir, |
| lq_sta, &rs_sta_dbgfs_scale_table_ops); |
| debugfs_create_file("rate_stats_table", S_IRUSR, dir, |
| lq_sta, &rs_sta_dbgfs_stats_table_ops); |
| debugfs_create_file("drv_tx_stats", S_IRUSR | S_IWUSR, dir, |
| lq_sta, &rs_sta_dbgfs_drv_tx_stats_ops); |
| debugfs_create_u8("tx_agg_tid_enable", S_IRUSR | S_IWUSR, dir, |
| &lq_sta->tx_agg_tid_en); |
| debugfs_create_u8("reduced_tpc", S_IRUSR | S_IWUSR, dir, |
| &lq_sta->pers.dbg_fixed_txp_reduction); |
| |
| MVM_DEBUGFS_ADD_FILE_RS(ss_force, dir, S_IRUSR | S_IWUSR); |
| return; |
| err: |
| IWL_ERR((struct iwl_mvm *)mvm, "Can't create debugfs entity\n"); |
| } |
| |
| static void rs_remove_debugfs(void *mvm, void *mvm_sta) |
| { |
| } |
| #endif |
| |
| /* |
| * Initialization of rate scaling information is done by driver after |
| * the station is added. Since mac80211 calls this function before a |
| * station is added we ignore it. |
| */ |
| static void rs_rate_init_stub(void *mvm_r, |
| struct ieee80211_supported_band *sband, |
| struct cfg80211_chan_def *chandef, |
| struct ieee80211_sta *sta, void *mvm_sta) |
| { |
| } |
| |
| static const struct rate_control_ops rs_mvm_ops = { |
| .name = RS_NAME, |
| .tx_status = rs_mac80211_tx_status, |
| .get_rate = rs_get_rate, |
| .rate_init = rs_rate_init_stub, |
| .alloc = rs_alloc, |
| .free = rs_free, |
| .alloc_sta = rs_alloc_sta, |
| .free_sta = rs_free_sta, |
| .rate_update = rs_rate_update, |
| #ifdef CONFIG_MAC80211_DEBUGFS |
| .add_sta_debugfs = rs_add_debugfs, |
| .remove_sta_debugfs = rs_remove_debugfs, |
| #endif |
| }; |
| |
| int iwl_mvm_rate_control_register(void) |
| { |
| return ieee80211_rate_control_register(&rs_mvm_ops); |
| } |
| |
| void iwl_mvm_rate_control_unregister(void) |
| { |
| ieee80211_rate_control_unregister(&rs_mvm_ops); |
| } |
| |
| /** |
| * iwl_mvm_tx_protection - Gets LQ command, change it to enable/disable |
| * Tx protection, according to this request and previous requests, |
| * and send the LQ command. |
| * @mvmsta: The station |
| * @enable: Enable Tx protection? |
| */ |
| int iwl_mvm_tx_protection(struct iwl_mvm *mvm, struct iwl_mvm_sta *mvmsta, |
| bool enable) |
| { |
| struct iwl_lq_cmd *lq = &mvmsta->lq_sta.lq; |
| |
| lockdep_assert_held(&mvm->mutex); |
| |
| if (enable) { |
| if (mvmsta->tx_protection == 0) |
| lq->flags |= LQ_FLAG_USE_RTS_MSK; |
| mvmsta->tx_protection++; |
| } else { |
| mvmsta->tx_protection--; |
| if (mvmsta->tx_protection == 0) |
| lq->flags &= ~LQ_FLAG_USE_RTS_MSK; |
| } |
| |
| return iwl_mvm_send_lq_cmd(mvm, lq, false); |
| } |