| /* |
| * LCD panel support for the TI OMAP3 Beagle board |
| * |
| * Author: Koen Kooi <koen@openembedded.org> |
| * |
| * Derived from drivers/video/omap/lcd-omap3evm.c |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, write to the Free Software Foundation, Inc., |
| * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/gpio.h> |
| #include <linux/i2c/twl.h> |
| |
| #include <plat/mux.h> |
| #include <plat/mux.h> |
| #include <asm/mach-types.h> |
| |
| #include "omapfb.h" |
| |
| #define LCD_PANEL_ENABLE_GPIO 170 |
| |
| static int omap3beagle_panel_init(struct lcd_panel *panel, |
| struct omapfb_device *fbdev) |
| { |
| gpio_request(LCD_PANEL_ENABLE_GPIO, "LCD enable"); |
| return 0; |
| } |
| |
| static void omap3beagle_panel_cleanup(struct lcd_panel *panel) |
| { |
| gpio_free(LCD_PANEL_ENABLE_GPIO); |
| } |
| |
| static int omap3beagle_panel_enable(struct lcd_panel *panel) |
| { |
| gpio_set_value(LCD_PANEL_ENABLE_GPIO, 1); |
| return 0; |
| } |
| |
| static void omap3beagle_panel_disable(struct lcd_panel *panel) |
| { |
| gpio_set_value(LCD_PANEL_ENABLE_GPIO, 0); |
| } |
| |
| static unsigned long omap3beagle_panel_get_caps(struct lcd_panel *panel) |
| { |
| return 0; |
| } |
| |
| struct lcd_panel omap3beagle_panel = { |
| .name = "omap3beagle", |
| .config = OMAP_LCDC_PANEL_TFT, |
| |
| .bpp = 16, |
| .data_lines = 24, |
| .x_res = 1024, |
| .y_res = 768, |
| .hsw = 3, /* hsync_len (4) - 1 */ |
| .hfp = 3, /* right_margin (4) - 1 */ |
| .hbp = 39, /* left_margin (40) - 1 */ |
| .vsw = 1, /* vsync_len (2) - 1 */ |
| .vfp = 2, /* lower_margin */ |
| .vbp = 7, /* upper_margin (8) - 1 */ |
| |
| .pixel_clock = 64000, |
| |
| .init = omap3beagle_panel_init, |
| .cleanup = omap3beagle_panel_cleanup, |
| .enable = omap3beagle_panel_enable, |
| .disable = omap3beagle_panel_disable, |
| .get_caps = omap3beagle_panel_get_caps, |
| }; |
| |
| static int omap3beagle_panel_probe(struct platform_device *pdev) |
| { |
| omapfb_register_panel(&omap3beagle_panel); |
| return 0; |
| } |
| |
| static int omap3beagle_panel_remove(struct platform_device *pdev) |
| { |
| return 0; |
| } |
| |
| static int omap3beagle_panel_suspend(struct platform_device *pdev, |
| pm_message_t mesg) |
| { |
| return 0; |
| } |
| |
| static int omap3beagle_panel_resume(struct platform_device *pdev) |
| { |
| return 0; |
| } |
| |
| struct platform_driver omap3beagle_panel_driver = { |
| .probe = omap3beagle_panel_probe, |
| .remove = omap3beagle_panel_remove, |
| .suspend = omap3beagle_panel_suspend, |
| .resume = omap3beagle_panel_resume, |
| .driver = { |
| .name = "omap3beagle_lcd", |
| .owner = THIS_MODULE, |
| }, |
| }; |
| |
| static int __init omap3beagle_panel_drv_init(void) |
| { |
| return platform_driver_register(&omap3beagle_panel_driver); |
| } |
| |
| static void __exit omap3beagle_panel_drv_exit(void) |
| { |
| platform_driver_unregister(&omap3beagle_panel_driver); |
| } |
| |
| module_init(omap3beagle_panel_drv_init); |
| module_exit(omap3beagle_panel_drv_exit); |