| /* |
| * builtin-stat.c |
| * |
| * Builtin stat command: Give a precise performance counters summary |
| * overview about any workload, CPU or specific PID. |
| * |
| * Sample output: |
| |
| $ perf stat ~/hackbench 10 |
| Time: 0.104 |
| |
| Performance counter stats for '/home/mingo/hackbench': |
| |
| 1255.538611 task clock ticks # 10.143 CPU utilization factor |
| 54011 context switches # 0.043 M/sec |
| 385 CPU migrations # 0.000 M/sec |
| 17755 pagefaults # 0.014 M/sec |
| 3808323185 CPU cycles # 3033.219 M/sec |
| 1575111190 instructions # 1254.530 M/sec |
| 17367895 cache references # 13.833 M/sec |
| 7674421 cache misses # 6.112 M/sec |
| |
| Wall-clock time elapsed: 123.786620 msecs |
| |
| * |
| * Copyright (C) 2008, Red Hat Inc, Ingo Molnar <mingo@redhat.com> |
| * |
| * Improvements and fixes by: |
| * |
| * Arjan van de Ven <arjan@linux.intel.com> |
| * Yanmin Zhang <yanmin.zhang@intel.com> |
| * Wu Fengguang <fengguang.wu@intel.com> |
| * Mike Galbraith <efault@gmx.de> |
| * Paul Mackerras <paulus@samba.org> |
| * Jaswinder Singh Rajput <jaswinder@kernel.org> |
| * |
| * Released under the GPL v2. (and only v2, not any later version) |
| */ |
| |
| #include "perf.h" |
| #include "builtin.h" |
| #include "util/util.h" |
| #include "util/parse-options.h" |
| #include "util/parse-events.h" |
| |
| #include <sys/prctl.h> |
| #include <math.h> |
| |
| static struct perf_counter_attr default_attrs[] = { |
| |
| { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_TASK_CLOCK }, |
| { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_CONTEXT_SWITCHES}, |
| { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_CPU_MIGRATIONS }, |
| { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_PAGE_FAULTS }, |
| |
| { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CPU_CYCLES }, |
| { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_INSTRUCTIONS }, |
| { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CACHE_REFERENCES}, |
| { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CACHE_MISSES }, |
| |
| }; |
| |
| #define MAX_RUN 100 |
| |
| static int system_wide = 0; |
| static unsigned int nr_cpus = 0; |
| static int run_idx = 0; |
| |
| static int run_count = 1; |
| static int inherit = 1; |
| static int scale = 1; |
| static int target_pid = -1; |
| static int null_run = 0; |
| |
| static int fd[MAX_NR_CPUS][MAX_COUNTERS]; |
| |
| static u64 runtime_nsecs[MAX_RUN]; |
| static u64 walltime_nsecs[MAX_RUN]; |
| static u64 runtime_cycles[MAX_RUN]; |
| |
| static u64 event_res[MAX_RUN][MAX_COUNTERS][3]; |
| static u64 event_scaled[MAX_RUN][MAX_COUNTERS]; |
| |
| static u64 event_res_avg[MAX_COUNTERS][3]; |
| static u64 event_res_noise[MAX_COUNTERS][3]; |
| |
| static u64 event_scaled_avg[MAX_COUNTERS]; |
| |
| static u64 runtime_nsecs_avg; |
| static u64 runtime_nsecs_noise; |
| |
| static u64 walltime_nsecs_avg; |
| static u64 walltime_nsecs_noise; |
| |
| static u64 runtime_cycles_avg; |
| static u64 runtime_cycles_noise; |
| |
| #define MATCH_EVENT(t, c, counter) \ |
| (attrs[counter].type == PERF_TYPE_##t && \ |
| attrs[counter].config == PERF_COUNT_##c) |
| |
| #define ERR_PERF_OPEN \ |
| "Error: counter %d, sys_perf_counter_open() syscall returned with %d (%s)\n" |
| |
| static void create_perf_stat_counter(int counter, int pid) |
| { |
| struct perf_counter_attr *attr = attrs + counter; |
| |
| if (scale) |
| attr->read_format = PERF_FORMAT_TOTAL_TIME_ENABLED | |
| PERF_FORMAT_TOTAL_TIME_RUNNING; |
| |
| if (system_wide) { |
| unsigned int cpu; |
| |
| for (cpu = 0; cpu < nr_cpus; cpu++) { |
| fd[cpu][counter] = sys_perf_counter_open(attr, -1, cpu, -1, 0); |
| if (fd[cpu][counter] < 0 && verbose) |
| fprintf(stderr, ERR_PERF_OPEN, counter, |
| fd[cpu][counter], strerror(errno)); |
| } |
| } else { |
| attr->inherit = inherit; |
| attr->disabled = 1; |
| attr->enable_on_exec = 1; |
| |
| fd[0][counter] = sys_perf_counter_open(attr, pid, -1, -1, 0); |
| if (fd[0][counter] < 0 && verbose) |
| fprintf(stderr, ERR_PERF_OPEN, counter, |
| fd[0][counter], strerror(errno)); |
| } |
| } |
| |
| /* |
| * Does the counter have nsecs as a unit? |
| */ |
| static inline int nsec_counter(int counter) |
| { |
| if (MATCH_EVENT(SOFTWARE, SW_CPU_CLOCK, counter) || |
| MATCH_EVENT(SOFTWARE, SW_TASK_CLOCK, counter)) |
| return 1; |
| |
| return 0; |
| } |
| |
| /* |
| * Read out the results of a single counter: |
| */ |
| static void read_counter(int counter) |
| { |
| u64 *count, single_count[3]; |
| unsigned int cpu; |
| size_t res, nv; |
| int scaled; |
| |
| count = event_res[run_idx][counter]; |
| |
| count[0] = count[1] = count[2] = 0; |
| |
| nv = scale ? 3 : 1; |
| for (cpu = 0; cpu < nr_cpus; cpu++) { |
| if (fd[cpu][counter] < 0) |
| continue; |
| |
| res = read(fd[cpu][counter], single_count, nv * sizeof(u64)); |
| assert(res == nv * sizeof(u64)); |
| |
| close(fd[cpu][counter]); |
| fd[cpu][counter] = -1; |
| |
| count[0] += single_count[0]; |
| if (scale) { |
| count[1] += single_count[1]; |
| count[2] += single_count[2]; |
| } |
| } |
| |
| scaled = 0; |
| if (scale) { |
| if (count[2] == 0) { |
| event_scaled[run_idx][counter] = -1; |
| count[0] = 0; |
| return; |
| } |
| |
| if (count[2] < count[1]) { |
| event_scaled[run_idx][counter] = 1; |
| count[0] = (unsigned long long) |
| ((double)count[0] * count[1] / count[2] + 0.5); |
| } |
| } |
| /* |
| * Save the full runtime - to allow normalization during printout: |
| */ |
| if (MATCH_EVENT(SOFTWARE, SW_TASK_CLOCK, counter)) |
| runtime_nsecs[run_idx] = count[0]; |
| if (MATCH_EVENT(HARDWARE, HW_CPU_CYCLES, counter)) |
| runtime_cycles[run_idx] = count[0]; |
| } |
| |
| static int run_perf_stat(int argc __used, const char **argv) |
| { |
| unsigned long long t0, t1; |
| int status = 0; |
| int counter; |
| int pid; |
| int child_ready_pipe[2], go_pipe[2]; |
| char buf; |
| |
| if (!system_wide) |
| nr_cpus = 1; |
| |
| if (pipe(child_ready_pipe) < 0 || pipe(go_pipe) < 0) { |
| perror("failed to create pipes"); |
| exit(1); |
| } |
| |
| if ((pid = fork()) < 0) |
| perror("failed to fork"); |
| |
| if (!pid) { |
| close(child_ready_pipe[0]); |
| close(go_pipe[1]); |
| fcntl(go_pipe[0], F_SETFD, FD_CLOEXEC); |
| |
| /* |
| * Do a dummy execvp to get the PLT entry resolved, |
| * so we avoid the resolver overhead on the real |
| * execvp call. |
| */ |
| execvp("", (char **)argv); |
| |
| /* |
| * Tell the parent we're ready to go |
| */ |
| close(child_ready_pipe[1]); |
| |
| /* |
| * Wait until the parent tells us to go. |
| */ |
| if (read(go_pipe[0], &buf, 1) == -1) |
| perror("unable to read pipe"); |
| |
| execvp(argv[0], (char **)argv); |
| |
| perror(argv[0]); |
| exit(-1); |
| } |
| |
| /* |
| * Wait for the child to be ready to exec. |
| */ |
| close(child_ready_pipe[1]); |
| close(go_pipe[0]); |
| if (read(child_ready_pipe[0], &buf, 1) == -1) |
| perror("unable to read pipe"); |
| close(child_ready_pipe[0]); |
| |
| for (counter = 0; counter < nr_counters; counter++) |
| create_perf_stat_counter(counter, pid); |
| |
| /* |
| * Enable counters and exec the command: |
| */ |
| t0 = rdclock(); |
| |
| close(go_pipe[1]); |
| wait(&status); |
| |
| t1 = rdclock(); |
| |
| walltime_nsecs[run_idx] = t1 - t0; |
| |
| for (counter = 0; counter < nr_counters; counter++) |
| read_counter(counter); |
| |
| return WEXITSTATUS(status); |
| } |
| |
| static void print_noise(u64 *count, u64 *noise) |
| { |
| if (run_count > 1) |
| fprintf(stderr, " ( +- %7.3f%% )", |
| (double)noise[0]/(count[0]+1)*100.0); |
| } |
| |
| static void nsec_printout(int counter, u64 *count, u64 *noise) |
| { |
| double msecs = (double)count[0] / 1000000; |
| |
| fprintf(stderr, " %14.6f %-24s", msecs, event_name(counter)); |
| |
| if (MATCH_EVENT(SOFTWARE, SW_TASK_CLOCK, counter)) { |
| if (walltime_nsecs_avg) |
| fprintf(stderr, " # %10.3f CPUs ", |
| (double)count[0] / (double)walltime_nsecs_avg); |
| } |
| print_noise(count, noise); |
| } |
| |
| static void abs_printout(int counter, u64 *count, u64 *noise) |
| { |
| fprintf(stderr, " %14Ld %-24s", count[0], event_name(counter)); |
| |
| if (runtime_cycles_avg && |
| MATCH_EVENT(HARDWARE, HW_INSTRUCTIONS, counter)) { |
| fprintf(stderr, " # %10.3f IPC ", |
| (double)count[0] / (double)runtime_cycles_avg); |
| } else { |
| if (runtime_nsecs_avg) { |
| fprintf(stderr, " # %10.3f M/sec", |
| (double)count[0]/runtime_nsecs_avg*1000.0); |
| } |
| } |
| print_noise(count, noise); |
| } |
| |
| /* |
| * Print out the results of a single counter: |
| */ |
| static void print_counter(int counter) |
| { |
| u64 *count, *noise; |
| int scaled; |
| |
| count = event_res_avg[counter]; |
| noise = event_res_noise[counter]; |
| scaled = event_scaled_avg[counter]; |
| |
| if (scaled == -1) { |
| fprintf(stderr, " %14s %-24s\n", |
| "<not counted>", event_name(counter)); |
| return; |
| } |
| |
| if (nsec_counter(counter)) |
| nsec_printout(counter, count, noise); |
| else |
| abs_printout(counter, count, noise); |
| |
| if (scaled) |
| fprintf(stderr, " (scaled from %.2f%%)", |
| (double) count[2] / count[1] * 100); |
| |
| fprintf(stderr, "\n"); |
| } |
| |
| /* |
| * normalize_noise noise values down to stddev: |
| */ |
| static void normalize_noise(u64 *val) |
| { |
| double res; |
| |
| res = (double)*val / (run_count * sqrt((double)run_count)); |
| |
| *val = (u64)res; |
| } |
| |
| static void update_avg(const char *name, int idx, u64 *avg, u64 *val) |
| { |
| *avg += *val; |
| |
| if (verbose > 1) |
| fprintf(stderr, "debug: %20s[%d]: %Ld\n", name, idx, *val); |
| } |
| /* |
| * Calculate the averages and noises: |
| */ |
| static void calc_avg(void) |
| { |
| int i, j; |
| |
| if (verbose > 1) |
| fprintf(stderr, "\n"); |
| |
| for (i = 0; i < run_count; i++) { |
| update_avg("runtime", 0, &runtime_nsecs_avg, runtime_nsecs + i); |
| update_avg("walltime", 0, &walltime_nsecs_avg, walltime_nsecs + i); |
| update_avg("runtime_cycles", 0, &runtime_cycles_avg, runtime_cycles + i); |
| |
| for (j = 0; j < nr_counters; j++) { |
| update_avg("counter/0", j, |
| event_res_avg[j]+0, event_res[i][j]+0); |
| update_avg("counter/1", j, |
| event_res_avg[j]+1, event_res[i][j]+1); |
| update_avg("counter/2", j, |
| event_res_avg[j]+2, event_res[i][j]+2); |
| if (event_scaled[i][j] != (u64)-1) |
| update_avg("scaled", j, |
| event_scaled_avg + j, event_scaled[i]+j); |
| else |
| event_scaled_avg[j] = -1; |
| } |
| } |
| runtime_nsecs_avg /= run_count; |
| walltime_nsecs_avg /= run_count; |
| runtime_cycles_avg /= run_count; |
| |
| for (j = 0; j < nr_counters; j++) { |
| event_res_avg[j][0] /= run_count; |
| event_res_avg[j][1] /= run_count; |
| event_res_avg[j][2] /= run_count; |
| } |
| |
| for (i = 0; i < run_count; i++) { |
| runtime_nsecs_noise += |
| abs((s64)(runtime_nsecs[i] - runtime_nsecs_avg)); |
| walltime_nsecs_noise += |
| abs((s64)(walltime_nsecs[i] - walltime_nsecs_avg)); |
| runtime_cycles_noise += |
| abs((s64)(runtime_cycles[i] - runtime_cycles_avg)); |
| |
| for (j = 0; j < nr_counters; j++) { |
| event_res_noise[j][0] += |
| abs((s64)(event_res[i][j][0] - event_res_avg[j][0])); |
| event_res_noise[j][1] += |
| abs((s64)(event_res[i][j][1] - event_res_avg[j][1])); |
| event_res_noise[j][2] += |
| abs((s64)(event_res[i][j][2] - event_res_avg[j][2])); |
| } |
| } |
| |
| normalize_noise(&runtime_nsecs_noise); |
| normalize_noise(&walltime_nsecs_noise); |
| normalize_noise(&runtime_cycles_noise); |
| |
| for (j = 0; j < nr_counters; j++) { |
| normalize_noise(&event_res_noise[j][0]); |
| normalize_noise(&event_res_noise[j][1]); |
| normalize_noise(&event_res_noise[j][2]); |
| } |
| } |
| |
| static void print_stat(int argc, const char **argv) |
| { |
| int i, counter; |
| |
| calc_avg(); |
| |
| fflush(stdout); |
| |
| fprintf(stderr, "\n"); |
| fprintf(stderr, " Performance counter stats for \'%s", argv[0]); |
| |
| for (i = 1; i < argc; i++) |
| fprintf(stderr, " %s", argv[i]); |
| |
| fprintf(stderr, "\'"); |
| if (run_count > 1) |
| fprintf(stderr, " (%d runs)", run_count); |
| fprintf(stderr, ":\n\n"); |
| |
| for (counter = 0; counter < nr_counters; counter++) |
| print_counter(counter); |
| |
| fprintf(stderr, "\n"); |
| fprintf(stderr, " %14.9f seconds time elapsed", |
| (double)walltime_nsecs_avg/1e9); |
| if (run_count > 1) { |
| fprintf(stderr, " ( +- %7.3f%% )", |
| 100.0*(double)walltime_nsecs_noise/(double)walltime_nsecs_avg); |
| } |
| fprintf(stderr, "\n\n"); |
| } |
| |
| static volatile int signr = -1; |
| |
| static void skip_signal(int signo) |
| { |
| signr = signo; |
| } |
| |
| static void sig_atexit(void) |
| { |
| if (signr == -1) |
| return; |
| |
| signal(signr, SIG_DFL); |
| kill(getpid(), signr); |
| } |
| |
| static const char * const stat_usage[] = { |
| "perf stat [<options>] <command>", |
| NULL |
| }; |
| |
| static const struct option options[] = { |
| OPT_CALLBACK('e', "event", NULL, "event", |
| "event selector. use 'perf list' to list available events", |
| parse_events), |
| OPT_BOOLEAN('i', "inherit", &inherit, |
| "child tasks inherit counters"), |
| OPT_INTEGER('p', "pid", &target_pid, |
| "stat events on existing pid"), |
| OPT_BOOLEAN('a', "all-cpus", &system_wide, |
| "system-wide collection from all CPUs"), |
| OPT_BOOLEAN('c', "scale", &scale, |
| "scale/normalize counters"), |
| OPT_BOOLEAN('v', "verbose", &verbose, |
| "be more verbose (show counter open errors, etc)"), |
| OPT_INTEGER('r', "repeat", &run_count, |
| "repeat command and print average + stddev (max: 100)"), |
| OPT_BOOLEAN('n', "null", &null_run, |
| "null run - dont start any counters"), |
| OPT_END() |
| }; |
| |
| int cmd_stat(int argc, const char **argv, const char *prefix __used) |
| { |
| int status; |
| |
| argc = parse_options(argc, argv, options, stat_usage, |
| PARSE_OPT_STOP_AT_NON_OPTION); |
| if (!argc) |
| usage_with_options(stat_usage, options); |
| if (run_count <= 0 || run_count > MAX_RUN) |
| usage_with_options(stat_usage, options); |
| |
| /* Set attrs and nr_counters if no event is selected and !null_run */ |
| if (!null_run && !nr_counters) { |
| memcpy(attrs, default_attrs, sizeof(default_attrs)); |
| nr_counters = ARRAY_SIZE(default_attrs); |
| } |
| |
| nr_cpus = sysconf(_SC_NPROCESSORS_ONLN); |
| assert(nr_cpus <= MAX_NR_CPUS); |
| assert((int)nr_cpus >= 0); |
| |
| /* |
| * We dont want to block the signals - that would cause |
| * child tasks to inherit that and Ctrl-C would not work. |
| * What we want is for Ctrl-C to work in the exec()-ed |
| * task, but being ignored by perf stat itself: |
| */ |
| atexit(sig_atexit); |
| signal(SIGINT, skip_signal); |
| signal(SIGALRM, skip_signal); |
| signal(SIGABRT, skip_signal); |
| |
| status = 0; |
| for (run_idx = 0; run_idx < run_count; run_idx++) { |
| if (run_count != 1 && verbose) |
| fprintf(stderr, "[ perf stat: executing run #%d ... ]\n", run_idx + 1); |
| status = run_perf_stat(argc, argv); |
| } |
| |
| print_stat(argc, argv); |
| |
| return status; |
| } |