bnxt_en: Cleanup and Fix flow control setup logic
Cleanup bnxt_probe_phy() to cleanly separate 2 code blocks for autoneg
on and off. Autoneg flow control is possible only if autoneg is enabled.
In bnxt_get_settings(), Pause and Asym_Pause are always supported.
Only the advertisement bits change depending on the ethtool -A setting
in auto mode.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index 5dc89e5..ddcf7ef 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -5670,22 +5670,16 @@
}
/*initialize the ethool setting copy with NVM settings */
- if (BNXT_AUTO_MODE(link_info->auto_mode))
- link_info->autoneg |= BNXT_AUTONEG_SPEED;
-
- if (link_info->auto_pause_setting & BNXT_LINK_PAUSE_BOTH) {
- if (link_info->auto_pause_setting == BNXT_LINK_PAUSE_BOTH)
- link_info->autoneg |= BNXT_AUTONEG_FLOW_CTRL;
+ if (BNXT_AUTO_MODE(link_info->auto_mode)) {
+ link_info->autoneg = BNXT_AUTONEG_SPEED |
+ BNXT_AUTONEG_FLOW_CTRL;
+ link_info->advertising = link_info->auto_link_speeds;
link_info->req_flow_ctrl = link_info->auto_pause_setting;
- } else if (link_info->force_pause_setting & BNXT_LINK_PAUSE_BOTH) {
+ } else {
+ link_info->req_link_speed = link_info->force_link_speed;
+ link_info->req_duplex = link_info->duplex_setting;
link_info->req_flow_ctrl = link_info->force_pause_setting;
}
- link_info->req_duplex = link_info->duplex_setting;
- if (link_info->autoneg & BNXT_AUTONEG_SPEED)
- link_info->req_link_speed = link_info->auto_link_speed;
- else
- link_info->req_link_speed = link_info->force_link_speed;
- link_info->advertising = link_info->auto_link_speeds;
snprintf(phy_ver, PHY_VER_STR_LEN, " ph %d.%d.%d",
link_info->phy_ver[0],
link_info->phy_ver[1],
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
index 7240307..afc9655 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
@@ -557,6 +557,7 @@
u16 ethtool_speed;
cmd->supported = bnxt_fw_to_ethtool_support_spds(link_info);
+ cmd->supported |= SUPPORTED_Pause | SUPPORTED_Asym_Pause;
if (link_info->auto_link_speeds)
cmd->supported |= SUPPORTED_Autoneg;
@@ -570,28 +571,16 @@
cmd->autoneg = AUTONEG_DISABLE;
cmd->advertising = 0;
}
- if (link_info->auto_pause_setting & BNXT_LINK_PAUSE_BOTH) {
+ if (link_info->autoneg & BNXT_AUTONEG_FLOW_CTRL) {
if ((link_info->auto_pause_setting & BNXT_LINK_PAUSE_BOTH) ==
BNXT_LINK_PAUSE_BOTH) {
cmd->advertising |= ADVERTISED_Pause;
- cmd->supported |= SUPPORTED_Pause;
} else {
cmd->advertising |= ADVERTISED_Asym_Pause;
- cmd->supported |= SUPPORTED_Asym_Pause;
if (link_info->auto_pause_setting &
BNXT_LINK_PAUSE_RX)
cmd->advertising |= ADVERTISED_Pause;
}
- } else if (link_info->force_pause_setting & BNXT_LINK_PAUSE_BOTH) {
- if ((link_info->force_pause_setting & BNXT_LINK_PAUSE_BOTH) ==
- BNXT_LINK_PAUSE_BOTH) {
- cmd->supported |= SUPPORTED_Pause;
- } else {
- cmd->supported |= SUPPORTED_Asym_Pause;
- if (link_info->force_pause_setting &
- BNXT_LINK_PAUSE_RX)
- cmd->supported |= SUPPORTED_Pause;
- }
}
cmd->port = PORT_NONE;