libfcoe: Fix fcoe_sysfs VN2VN mode
The libfc discovery layer is being initialized in the
'create' paths for both legacy libfcoe module parameters
and fcoe_sysfs control interfaces. The problem is that
for VN2VN mode the discovery layer is initialized as if
it were in 'fabric' mode and it is not re-configured when
the mode is changed to 'vn2vn'.
This patch splits out code that needs to be initialized
once and code that can, and should be, re-configured when
the mode changes. Additionally this patch makes that change
so that the discovery layer can be reconfigured to the
libfcoe implementation when in 'vn2vn' mode.
Signed-off-by: Robert Love <robert.w.love@intel.com>
Tested-by: Jack Morgan <jack.morgan@intel.com>
Reviewed-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com>
diff --git a/drivers/scsi/fcoe/fcoe_ctlr.c b/drivers/scsi/fcoe/fcoe_ctlr.c
index 34ee56c..a762472 100644
--- a/drivers/scsi/fcoe/fcoe_ctlr.c
+++ b/drivers/scsi/fcoe/fcoe_ctlr.c
@@ -2815,6 +2815,47 @@
}
/**
+ * fcoe_ctlr_mode_set() - Set or reset the ctlr's mode
+ * @lport: The local port to be (re)configured
+ * @fip: The FCoE controller whose mode is changing
+ * @fip_mode: The new fip mode
+ *
+ * Note that the we shouldn't be changing the libfc discovery settings
+ * (fc_disc_config) while an lport is going through the libfc state
+ * machine. The mode can only be changed when a fcoe_ctlr device is
+ * disabled, so that should ensure that this routine is only called
+ * when nothing is happening.
+ */
+void fcoe_ctlr_mode_set(struct fc_lport *lport, struct fcoe_ctlr *fip,
+ enum fip_state fip_mode)
+{
+ void *priv;
+
+ WARN_ON(lport->state != LPORT_ST_RESET &&
+ lport->state != LPORT_ST_DISABLED);
+
+ if (fip_mode == FIP_MODE_VN2VN) {
+ lport->rport_priv_size = sizeof(struct fcoe_rport);
+ lport->point_to_multipoint = 1;
+ lport->tt.disc_recv_req = fcoe_ctlr_disc_recv;
+ lport->tt.disc_start = fcoe_ctlr_disc_start;
+ lport->tt.disc_stop = fcoe_ctlr_disc_stop;
+ lport->tt.disc_stop_final = fcoe_ctlr_disc_stop_final;
+ priv = fip;
+ } else {
+ lport->rport_priv_size = 0;
+ lport->point_to_multipoint = 0;
+ lport->tt.disc_recv_req = NULL;
+ lport->tt.disc_start = NULL;
+ lport->tt.disc_stop = NULL;
+ lport->tt.disc_stop_final = NULL;
+ priv = lport;
+ }
+
+ fc_disc_config(lport, priv);
+}
+
+/**
* fcoe_libfc_config() - Sets up libfc related properties for local port
* @lport: The local port to configure libfc for
* @fip: The FCoE controller in use by the local port
@@ -2826,8 +2867,6 @@
int fcoe_libfc_config(struct fc_lport *lport, struct fcoe_ctlr *fip,
const struct libfc_function_template *tt, int init_fcp)
{
- void *priv = lport;
-
/* Set the function pointers set by the LLDD */
memcpy(&lport->tt, tt, sizeof(*tt));
if (init_fcp && fc_fcp_init(lport))
@@ -2835,21 +2874,9 @@
fc_exch_init(lport);
fc_elsct_init(lport);
fc_lport_init(lport);
- if (fip->mode == FIP_MODE_VN2VN)
- lport->rport_priv_size = sizeof(struct fcoe_rport);
fc_rport_init(lport);
- if (fip->mode == FIP_MODE_VN2VN) {
- lport->point_to_multipoint = 1;
- lport->tt.disc_recv_req = fcoe_ctlr_disc_recv;
- lport->tt.disc_start = fcoe_ctlr_disc_start;
- lport->tt.disc_stop = fcoe_ctlr_disc_stop;
- lport->tt.disc_stop_final = fcoe_ctlr_disc_stop_final;
- priv = fip;
- }
-
fc_disc_init(lport);
- fc_disc_config(lport, priv);
-
+ fcoe_ctlr_mode_set(lport, fip, fip->mode);
return 0;
}
EXPORT_SYMBOL_GPL(fcoe_libfc_config);
@@ -2877,6 +2904,7 @@
void fcoe_ctlr_set_fip_mode(struct fcoe_ctlr_device *ctlr_dev)
{
struct fcoe_ctlr *ctlr = fcoe_ctlr_device_priv(ctlr_dev);
+ struct fc_lport *lport = ctlr->lp;
mutex_lock(&ctlr->ctlr_mutex);
switch (ctlr_dev->mode) {
@@ -2890,5 +2918,7 @@
}
mutex_unlock(&ctlr->ctlr_mutex);
+
+ fcoe_ctlr_mode_set(lport, ctlr, ctlr->mode);
}
EXPORT_SYMBOL(fcoe_ctlr_set_fip_mode);