| /* |
| * MPC85xx setup and early boot code plus other random bits. |
| * |
| * Maintained by Kumar Gala (see MAINTAINERS for contact information) |
| * |
| * Copyright 2005 Freescale Semiconductor Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| */ |
| |
| #include <linux/stddef.h> |
| #include <linux/kernel.h> |
| #include <linux/pci.h> |
| #include <linux/kdev_t.h> |
| #include <linux/delay.h> |
| #include <linux/seq_file.h> |
| #include <linux/of_platform.h> |
| |
| #include <asm/system.h> |
| #include <asm/time.h> |
| #include <asm/machdep.h> |
| #include <asm/pci-bridge.h> |
| #include <asm/mpic.h> |
| #include <mm/mmu_decl.h> |
| #include <asm/udbg.h> |
| |
| #include <sysdev/fsl_soc.h> |
| #include <sysdev/fsl_pci.h> |
| |
| #ifdef CONFIG_CPM2 |
| #include <asm/cpm2.h> |
| #include <sysdev/cpm2_pic.h> |
| #endif |
| |
| #ifdef CONFIG_PCI |
| static int mpc85xx_exclude_device(struct pci_controller *hose, |
| u_char bus, u_char devfn) |
| { |
| if (bus == 0 && PCI_SLOT(devfn) == 0) |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| else |
| return PCIBIOS_SUCCESSFUL; |
| } |
| #endif /* CONFIG_PCI */ |
| |
| #ifdef CONFIG_CPM2 |
| |
| static void cpm2_cascade(unsigned int irq, struct irq_desc *desc) |
| { |
| int cascade_irq; |
| |
| while ((cascade_irq = cpm2_get_irq()) >= 0) |
| generic_handle_irq(cascade_irq); |
| |
| desc->chip->eoi(irq); |
| } |
| |
| #endif /* CONFIG_CPM2 */ |
| |
| static void __init mpc85xx_ads_pic_init(void) |
| { |
| struct mpic *mpic; |
| struct resource r; |
| struct device_node *np = NULL; |
| #ifdef CONFIG_CPM2 |
| int irq; |
| #endif |
| |
| np = of_find_node_by_type(np, "open-pic"); |
| if (!np) { |
| printk(KERN_ERR "Could not find open-pic node\n"); |
| return; |
| } |
| |
| if (of_address_to_resource(np, 0, &r)) { |
| printk(KERN_ERR "Could not map mpic register space\n"); |
| of_node_put(np); |
| return; |
| } |
| |
| mpic = mpic_alloc(np, r.start, |
| MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN, |
| 0, 256, " OpenPIC "); |
| BUG_ON(mpic == NULL); |
| of_node_put(np); |
| |
| mpic_init(mpic); |
| |
| #ifdef CONFIG_CPM2 |
| /* Setup CPM2 PIC */ |
| np = of_find_compatible_node(NULL, NULL, "fsl,cpm2-pic"); |
| if (np == NULL) { |
| printk(KERN_ERR "PIC init: can not find fsl,cpm2-pic node\n"); |
| return; |
| } |
| irq = irq_of_parse_and_map(np, 0); |
| |
| cpm2_pic_init(np); |
| of_node_put(np); |
| set_irq_chained_handler(irq, cpm2_cascade); |
| #endif |
| } |
| |
| /* |
| * Setup the architecture |
| */ |
| #ifdef CONFIG_CPM2 |
| struct cpm_pin { |
| int port, pin, flags; |
| }; |
| |
| static const struct cpm_pin mpc8560_ads_pins[] = { |
| /* SCC1 */ |
| {3, 29, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, |
| {3, 30, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, |
| {3, 31, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, |
| |
| /* SCC2 */ |
| {3, 26, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, |
| {3, 27, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, |
| {3, 28, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, |
| |
| /* FCC2 */ |
| {1, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, |
| {1, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, |
| {1, 20, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, |
| {1, 21, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, |
| {1, 22, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, |
| {1, 23, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, |
| {1, 24, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, |
| {1, 25, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, |
| {1, 26, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, |
| {1, 27, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, |
| {1, 28, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, |
| {1, 29, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, |
| {1, 30, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, |
| {1, 31, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, |
| {2, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* CLK14 */ |
| {2, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* CLK13 */ |
| |
| /* FCC3 */ |
| {1, 4, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, |
| {1, 5, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, |
| {1, 6, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, |
| {1, 7, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, |
| {1, 8, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, |
| {1, 9, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, |
| {1, 10, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, |
| {1, 11, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, |
| {1, 12, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, |
| {1, 13, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, |
| {1, 14, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, |
| {1, 15, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, |
| {1, 16, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, |
| {1, 17, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, |
| {2, 16, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* CLK16 */ |
| {2, 17, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* CLK15 */ |
| }; |
| |
| static void __init init_ioports(void) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(mpc8560_ads_pins); i++) { |
| struct cpm_pin *pin = &mpc8560_ads_pins[i]; |
| cpm2_set_pin(pin->port, pin->pin, pin->flags); |
| } |
| |
| cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_RX); |
| cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_TX); |
| cpm2_clk_setup(CPM_CLK_SCC2, CPM_BRG2, CPM_CLK_RX); |
| cpm2_clk_setup(CPM_CLK_SCC2, CPM_BRG2, CPM_CLK_TX); |
| cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK13, CPM_CLK_RX); |
| cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK14, CPM_CLK_TX); |
| cpm2_clk_setup(CPM_CLK_FCC3, CPM_CLK15, CPM_CLK_RX); |
| cpm2_clk_setup(CPM_CLK_FCC3, CPM_CLK16, CPM_CLK_TX); |
| } |
| #endif |
| |
| static void __init mpc85xx_ads_setup_arch(void) |
| { |
| #ifdef CONFIG_PCI |
| struct device_node *np; |
| #endif |
| |
| if (ppc_md.progress) |
| ppc_md.progress("mpc85xx_ads_setup_arch()", 0); |
| |
| #ifdef CONFIG_CPM2 |
| cpm2_reset(); |
| init_ioports(); |
| #endif |
| |
| #ifdef CONFIG_PCI |
| for_each_compatible_node(np, "pci", "fsl,mpc8540-pci") |
| fsl_add_bridge(np, 1); |
| |
| ppc_md.pci_exclude_device = mpc85xx_exclude_device; |
| #endif |
| } |
| |
| static void mpc85xx_ads_show_cpuinfo(struct seq_file *m) |
| { |
| uint pvid, svid, phid1; |
| uint memsize = total_memory; |
| |
| pvid = mfspr(SPRN_PVR); |
| svid = mfspr(SPRN_SVR); |
| |
| seq_printf(m, "Vendor\t\t: Freescale Semiconductor\n"); |
| seq_printf(m, "Machine\t\t: mpc85xx\n"); |
| seq_printf(m, "PVR\t\t: 0x%x\n", pvid); |
| seq_printf(m, "SVR\t\t: 0x%x\n", svid); |
| |
| /* Display cpu Pll setting */ |
| phid1 = mfspr(SPRN_HID1); |
| seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f)); |
| |
| /* Display the amount of memory */ |
| seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024)); |
| } |
| |
| static struct of_device_id __initdata of_bus_ids[] = { |
| { .name = "soc", }, |
| { .type = "soc", }, |
| { .name = "cpm", }, |
| { .name = "localbus", }, |
| {}, |
| }; |
| |
| static int __init declare_of_platform_devices(void) |
| { |
| of_platform_bus_probe(NULL, of_bus_ids, NULL); |
| |
| return 0; |
| } |
| machine_device_initcall(mpc85xx_ads, declare_of_platform_devices); |
| |
| /* |
| * Called very early, device-tree isn't unflattened |
| */ |
| static int __init mpc85xx_ads_probe(void) |
| { |
| unsigned long root = of_get_flat_dt_root(); |
| |
| return of_flat_dt_is_compatible(root, "MPC85xxADS"); |
| } |
| |
| define_machine(mpc85xx_ads) { |
| .name = "MPC85xx ADS", |
| .probe = mpc85xx_ads_probe, |
| .setup_arch = mpc85xx_ads_setup_arch, |
| .init_IRQ = mpc85xx_ads_pic_init, |
| .show_cpuinfo = mpc85xx_ads_show_cpuinfo, |
| .get_irq = mpic_get_irq, |
| .restart = fsl_rstcr_restart, |
| .calibrate_decr = generic_calibrate_decr, |
| .progress = udbg_progress, |
| }; |