greybus: Drop protocol specific _PROTOCOL_VERSION and _INVALID macros
Greybus core supports protocol independent macros for this now, use
them.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
diff --git a/drivers/staging/greybus/control.c b/drivers/staging/greybus/control.c
index 605e6134..e675c5c 100644
--- a/drivers/staging/greybus/control.c
+++ b/drivers/staging/greybus/control.c
@@ -71,7 +71,7 @@
// Send authenticated block of data, confirming this module is
// an AP.
break;
- case GB_CONTROL_TYPE_PROTOCOL_VERSION:
+ case GB_REQUEST_TYPE_PROTOCOL_VERSION:
if (!gb_operation_response_alloc(op, sizeof(*version),
GFP_KERNEL)) {
dev_err(&connection->dev,
diff --git a/drivers/staging/greybus/greybus_protocols.h b/drivers/staging/greybus/greybus_protocols.h
index 09a4466..a80c2f2 100644
--- a/drivers/staging/greybus/greybus_protocols.h
+++ b/drivers/staging/greybus/greybus_protocols.h
@@ -118,8 +118,6 @@
#define GB_CONTROL_VERSION_MINOR 0x01
/* Greybus control request types */
-#define GB_CONTROL_TYPE_INVALID 0x00
-#define GB_CONTROL_TYPE_PROTOCOL_VERSION 0x01
#define GB_CONTROL_TYPE_PROBE_AP 0x02
#define GB_CONTROL_TYPE_GET_MANIFEST_SIZE 0x03
#define GB_CONTROL_TYPE_GET_MANIFEST 0x04
@@ -154,8 +152,6 @@
#define GB_FIRMWARE_VERSION_MINOR 0x01
/* Greybus firmware request types */
-#define GB_FIRMWARE_TYPE_INVALID 0x00
-#define GB_FIRMWARE_TYPE_PROTOCOL_VERSION 0x01
#define GB_FIRMWARE_TYPE_FIRMWARE_SIZE 0x02
#define GB_FIRMWARE_TYPE_GET_FIRMWARE 0x03
#define GB_FIRMWARE_TYPE_READY_TO_BOOT 0x04
@@ -265,8 +261,6 @@
#define GB_HID_VERSION_MINOR 0x01
/* Greybus HID operation types */
-#define GB_HID_TYPE_INVALID 0x00
-#define GB_HID_TYPE_PROTOCOL_VERSION 0x01
#define GB_HID_TYPE_GET_DESC 0x02
#define GB_HID_TYPE_GET_REPORT_DESC 0x03
#define GB_HID_TYPE_PWR_ON 0x04
@@ -317,8 +311,6 @@
#define GB_I2C_VERSION_MINOR 0x01
/* Greybus i2c request types */
-#define GB_I2C_TYPE_INVALID 0x00
-#define GB_I2C_TYPE_PROTOCOL_VERSION 0x01
#define GB_I2C_TYPE_FUNCTIONALITY 0x02
#define GB_I2C_TYPE_TIMEOUT 0x03
#define GB_I2C_TYPE_RETRIES 0x04
@@ -374,8 +366,6 @@
#define GB_GPIO_VERSION_MINOR 0x01
/* Greybus GPIO request types */
-#define GB_GPIO_TYPE_INVALID 0x00
-#define GB_GPIO_TYPE_PROTOCOL_VERSION 0x01
#define GB_GPIO_TYPE_LINE_COUNT 0x02
#define GB_GPIO_TYPE_ACTIVATE 0x03
#define GB_GPIO_TYPE_DEACTIVATE 0x04
@@ -479,8 +469,6 @@
#define GB_PWM_VERSION_MINOR 0x01
/* Greybus PWM operation types */
-#define GB_PWM_TYPE_INVALID 0x00
-#define GB_PWM_TYPE_PROTOCOL_VERSION 0x01
#define GB_PWM_TYPE_PWM_COUNT 0x02
#define GB_PWM_TYPE_ACTIVATE 0x03
#define GB_PWM_TYPE_DEACTIVATE 0x04
@@ -523,7 +511,6 @@
/* I2S */
-#define GB_I2S_MGMT_TYPE_PROTOCOL_VERSION 0x01
#define GB_I2S_MGMT_TYPE_GET_SUPPORTED_CONFIGURATIONS 0x02
#define GB_I2S_MGMT_TYPE_SET_CONFIGURATION 0x03
#define GB_I2S_MGMT_TYPE_SET_SAMPLES_PER_MESSAGE 0x04
@@ -650,7 +637,6 @@
};
/* report event response has no payload */
-#define GB_I2S_DATA_TYPE_PROTOCOL_VERSION 0x01
#define GB_I2S_DATA_TYPE_SEND_DATA 0x02
struct gb_i2s_send_data_request {
@@ -687,8 +673,6 @@
#define GB_SPI_FLAG_NO_TX BIT(2) /* can't do buffer write */
/* Greybus spi operation types */
-#define GB_SPI_TYPE_INVALID 0x00
-#define GB_SPI_TYPE_PROTOCOL_VERSION 0x01
#define GB_SPI_TYPE_MODE 0x02
#define GB_SPI_TYPE_FLAGS 0x03
#define GB_SPI_TYPE_BITS_PER_WORD_MASK 0x04
@@ -751,8 +735,6 @@
#define GB_SVC_VERSION_MINOR 0x01
/* Greybus SVC request types */
-#define GB_SVC_TYPE_INVALID 0x00
-#define GB_SVC_TYPE_PROTOCOL_VERSION 0x01
#define GB_SVC_TYPE_SVC_HELLO 0x02
#define GB_SVC_TYPE_INTF_DEVICE_ID 0x03
#define GB_SVC_TYPE_INTF_HOTPLUG 0x04
@@ -846,8 +828,6 @@
#define GB_UART_VERSION_MINOR 0x01
/* Greybus UART operation types */
-#define GB_UART_TYPE_INVALID 0x00
-#define GB_UART_TYPE_PROTOCOL_VERSION 0x01
#define GB_UART_TYPE_SEND_DATA 0x02
#define GB_UART_TYPE_RECEIVE_DATA 0x03 /* Unsolicited data */
#define GB_UART_TYPE_SET_LINE_CODING 0x04
@@ -919,8 +899,6 @@
#define GB_LOOPBACK_VERSION_MINOR 0x01
/* Greybus loopback request types */
-#define GB_LOOPBACK_TYPE_INVALID 0x00
-#define GB_LOOPBACK_TYPE_PROTOCOL_VERSION 0x01
#define GB_LOOPBACK_TYPE_PING 0x02
#define GB_LOOPBACK_TYPE_TRANSFER 0x03
#define GB_LOOPBACK_TYPE_SINK 0x04
@@ -940,8 +918,6 @@
#define GB_SDIO_VERSION_MINOR 0x01
/* Greybus SDIO operation types */
-#define GB_SDIO_TYPE_INVALID 0x00
-#define GB_SDIO_TYPE_PROTOCOL_VERSION 0x01
#define GB_SDIO_TYPE_GET_CAPABILITIES 0x02
#define GB_SDIO_TYPE_SET_IOS 0x03
#define GB_SDIO_TYPE_COMMAND 0x04
diff --git a/drivers/staging/greybus/loopback.c b/drivers/staging/greybus/loopback.c
index 852b6be..cf525f8 100644
--- a/drivers/staging/greybus/loopback.c
+++ b/drivers/staging/greybus/loopback.c
@@ -319,7 +319,7 @@
/* By convention, the AP initiates the version operation */
switch (type) {
- case GB_LOOPBACK_TYPE_PROTOCOL_VERSION:
+ case GB_REQUEST_TYPE_PROTOCOL_VERSION:
dev_err(&connection->dev,
"module-initiated version operation\n");
return -EINVAL;
diff --git a/drivers/staging/greybus/svc.c b/drivers/staging/greybus/svc.c
index 5ff7cf3..452f81b 100644
--- a/drivers/staging/greybus/svc.c
+++ b/drivers/staging/greybus/svc.c
@@ -452,7 +452,7 @@
static int gb_svc_request_recv(u8 type, struct gb_operation *op)
{
switch (type) {
- case GB_SVC_TYPE_PROTOCOL_VERSION:
+ case GB_REQUEST_TYPE_PROTOCOL_VERSION:
return gb_svc_version_request(op);
case GB_SVC_TYPE_SVC_HELLO:
return gb_svc_hello(op);