regulator: s2mpxxx: Move regulator min/step voltages in common place
This is a cleanup patch and moves min/step voltages in a common samsung
header file so that they can be used by other s2mpxxx PMIC drivers. Only
few required macros are added currently and others can be added if needed.
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
diff --git a/drivers/regulator/s2mpa01.c b/drivers/regulator/s2mpa01.c
index ee83b48..962c5f1 100644
--- a/drivers/regulator/s2mpa01.c
+++ b/drivers/regulator/s2mpa01.c
@@ -241,8 +241,8 @@
.ops = &s2mpa01_ldo_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
- .min_uV = S2MPA01_LDO_MIN, \
- .uV_step = S2MPA01_LDO_STEP1, \
+ .min_uV = MIN_800_MV, \
+ .uV_step = STEP_50_MV, \
.n_voltages = S2MPA01_LDO_N_VOLTAGES, \
.vsel_reg = S2MPA01_REG_L1CTRL + num - 1, \
.vsel_mask = S2MPA01_LDO_VSEL_MASK, \
@@ -255,8 +255,8 @@
.ops = &s2mpa01_ldo_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
- .min_uV = S2MPA01_LDO_MIN, \
- .uV_step = S2MPA01_LDO_STEP2, \
+ .min_uV = MIN_800_MV, \
+ .uV_step = STEP_25_MV, \
.n_voltages = S2MPA01_LDO_N_VOLTAGES, \
.vsel_reg = S2MPA01_REG_L1CTRL + num - 1, \
.vsel_mask = S2MPA01_LDO_VSEL_MASK, \
@@ -270,8 +270,8 @@
.ops = &s2mpa01_buck_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
- .min_uV = S2MPA01_BUCK_MIN1, \
- .uV_step = S2MPA01_BUCK_STEP1, \
+ .min_uV = MIN_600_MV, \
+ .uV_step = STEP_6_25_MV, \
.n_voltages = S2MPA01_BUCK_N_VOLTAGES, \
.ramp_delay = S2MPA01_RAMP_DELAY, \
.vsel_reg = S2MPA01_REG_B1CTRL2 + (num - 1) * 2, \
@@ -286,8 +286,8 @@
.ops = &s2mpa01_buck_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
- .min_uV = S2MPA01_BUCK_MIN2, \
- .uV_step = S2MPA01_BUCK_STEP1, \
+ .min_uV = MIN_800_MV, \
+ .uV_step = STEP_6_25_MV, \
.n_voltages = S2MPA01_BUCK_N_VOLTAGES, \
.ramp_delay = S2MPA01_RAMP_DELAY, \
.vsel_reg = S2MPA01_REG_B5CTRL2, \
@@ -302,8 +302,8 @@
.ops = &s2mpa01_buck_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
- .min_uV = S2MPA01_BUCK_MIN1, \
- .uV_step = S2MPA01_BUCK_STEP1, \
+ .min_uV = MIN_600_MV, \
+ .uV_step = STEP_6_25_MV, \
.n_voltages = S2MPA01_BUCK_N_VOLTAGES, \
.ramp_delay = S2MPA01_RAMP_DELAY, \
.vsel_reg = S2MPA01_REG_B6CTRL2 + (num - 6) * 2, \
@@ -318,8 +318,8 @@
.ops = &s2mpa01_buck_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
- .min_uV = S2MPA01_BUCK_MIN2, \
- .uV_step = S2MPA01_BUCK_STEP2, \
+ .min_uV = MIN_800_MV, \
+ .uV_step = STEP_12_5_MV, \
.n_voltages = S2MPA01_BUCK_N_VOLTAGES, \
.ramp_delay = S2MPA01_RAMP_DELAY, \
.vsel_reg = S2MPA01_REG_B8CTRL2, \
@@ -334,8 +334,8 @@
.ops = &s2mpa01_buck_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
- .min_uV = S2MPA01_BUCK_MIN4, \
- .uV_step = S2MPA01_BUCK_STEP2, \
+ .min_uV = MIN_1500_MV, \
+ .uV_step = STEP_12_5_MV, \
.n_voltages = S2MPA01_BUCK_N_VOLTAGES, \
.ramp_delay = S2MPA01_RAMP_DELAY, \
.vsel_reg = S2MPA01_REG_B9CTRL2, \
@@ -350,8 +350,8 @@
.ops = &s2mpa01_buck_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
- .min_uV = S2MPA01_BUCK_MIN3, \
- .uV_step = S2MPA01_BUCK_STEP2, \
+ .min_uV = MIN_1000_MV, \
+ .uV_step = STEP_12_5_MV, \
.n_voltages = S2MPA01_BUCK_N_VOLTAGES, \
.ramp_delay = S2MPA01_RAMP_DELAY, \
.vsel_reg = S2MPA01_REG_B10CTRL2, \