tipc: cleanup various cosmetic whitespace issues
Cleans up TIPC's source code to eliminate deviations from generally
accepted coding conventions relating to leading/trailing white space
and white space around commas, braces, cases, and sizeof.
These changes are purely cosmetic and do not alter the operation of TIPC
in any way.
Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/include/linux/tipc_config.h b/include/linux/tipc_config.h
index 677aa13..7d42460a 100644
--- a/include/linux/tipc_config.h
+++ b/include/linux/tipc_config.h
@@ -1,6 +1,6 @@
/*
* include/linux/tipc_config.h: Include file for TIPC configuration interface
- *
+ *
* Copyright (c) 2003-2006, Ericsson AB
* Copyright (c) 2005-2007, Wind River Systems
* All rights reserved.
@@ -54,19 +54,19 @@
* which specify parameters or results for the operation.
*
* For many operations, the request and reply messages have a fixed number
- * of TLVs (usually zero or one); however, some reply messages may return
+ * of TLVs (usually zero or one); however, some reply messages may return
* a variable number of TLVs. A failed request is denoted by the presence
* of an "error string" TLV in the reply message instead of the TLV(s) the
* reply should contain if the request succeeds.
*/
-
-/*
+
+/*
* Public commands:
* May be issued by any process.
- * Accepted by own node, or by remote node only if remote management enabled.
+ * Accepted by own node, or by remote node only if remote management enabled.
*/
-
-#define TIPC_CMD_NOOP 0x0000 /* tx none, rx none */
+
+#define TIPC_CMD_NOOP 0x0000 /* tx none, rx none */
#define TIPC_CMD_GET_NODES 0x0001 /* tx net_addr, rx node_info(s) */
#define TIPC_CMD_GET_MEDIA_NAMES 0x0002 /* tx none, rx media_name(s) */
#define TIPC_CMD_GET_BEARER_NAMES 0x0003 /* tx none, rx bearer_name(s) */
@@ -83,11 +83,11 @@
#define TIPC_CMD_GET_LINK_PEER 0x000D /* tx link_name, rx ? */
#endif
-/*
+/*
* Protected commands:
* May only be issued by "network administration capable" process.
* Accepted by own node, or by remote node only if remote management enabled
- * and this node is zone manager.
+ * and this node is zone manager.
*/
#define TIPC_CMD_GET_REMOTE_MNG 0x4003 /* tx none, rx unsigned */
@@ -116,10 +116,10 @@
#define TIPC_CMD_UNBLOCK_LINK 0x4106 /* tx link_name, rx none */
#endif
-/*
+/*
* Private commands:
* May only be issued by "network administration capable" process.
- * Accepted by own node only; cannot be used on a remote node.
+ * Accepted by own node only; cannot be used on a remote node.
*/
#define TIPC_CMD_SET_NODE_ADDR 0x8001 /* tx net_addr, rx none */
@@ -156,20 +156,20 @@
#define TIPC_TLV_ULTRA_STRING 5 /* char[32768] (max) */
#define TIPC_TLV_ERROR_STRING 16 /* char[128] containing "error code" */
-#define TIPC_TLV_NET_ADDR 17 /* 32-bit integer denoting <Z.C.N> */
+#define TIPC_TLV_NET_ADDR 17 /* 32-bit integer denoting <Z.C.N> */
#define TIPC_TLV_MEDIA_NAME 18 /* char[TIPC_MAX_MEDIA_NAME] */
#define TIPC_TLV_BEARER_NAME 19 /* char[TIPC_MAX_BEARER_NAME] */
#define TIPC_TLV_LINK_NAME 20 /* char[TIPC_MAX_LINK_NAME] */
#define TIPC_TLV_NODE_INFO 21 /* struct tipc_node_info */
#define TIPC_TLV_LINK_INFO 22 /* struct tipc_link_info */
-#define TIPC_TLV_BEARER_CONFIG 23 /* struct tipc_bearer_config */
-#define TIPC_TLV_LINK_CONFIG 24 /* struct tipc_link_config */
+#define TIPC_TLV_BEARER_CONFIG 23 /* struct tipc_bearer_config */
+#define TIPC_TLV_LINK_CONFIG 24 /* struct tipc_link_config */
#define TIPC_TLV_NAME_TBL_QUERY 25 /* struct tipc_name_table_query */
-#define TIPC_TLV_PORT_REF 26 /* 32-bit port reference */
+#define TIPC_TLV_PORT_REF 26 /* 32-bit port reference */
/*
* Maximum sizes of TIPC bearer-related names (including terminating NUL)
- */
+ */
#define TIPC_MAX_MEDIA_NAME 16 /* format = media */
#define TIPC_MAX_IF_NAME 16 /* format = interface */
@@ -234,7 +234,7 @@
};
/*
- * The error string TLV is a null-terminated string describing the cause
+ * The error string TLV is a null-terminated string describing the cause
* of the request failure. To simplify error processing (and to save space)
* the first character of the string can be a special error code character
* (lying by the range 0x80 to 0xFF) which represents a pre-defined reason.
@@ -258,7 +258,7 @@
/*
* A TLV consists of a descriptor, followed by the TLV value.
- * TLV descriptor fields are stored in network byte order;
+ * TLV descriptor fields are stored in network byte order;
* TLV values must also be stored in network byte order (where applicable).
* TLV descriptors must be aligned to addresses which are multiple of 4,
* so up to 3 bytes of padding may exist at the end of the TLV value area.
@@ -294,7 +294,7 @@
static inline int TLV_CHECK(const void *tlv, __u16 space, __u16 exp_type)
{
- return TLV_OK(tlv, space) &&
+ return TLV_OK(tlv, space) &&
(ntohs(((struct tlv_desc *)tlv)->tlv_type) == exp_type);
}
@@ -313,7 +313,7 @@
}
/*
- * A TLV list descriptor simplifies processing of messages
+ * A TLV list descriptor simplifies processing of messages
* containing multiple TLVs.
*/
@@ -322,15 +322,15 @@
__u32 tlv_space; /* # bytes from curr TLV to list end */
};
-static inline void TLV_LIST_INIT(struct tlv_list_desc *list,
+static inline void TLV_LIST_INIT(struct tlv_list_desc *list,
void *data, __u32 space)
{
list->tlv_ptr = (struct tlv_desc *)data;
list->tlv_space = space;
}
-
+
static inline int TLV_LIST_EMPTY(struct tlv_list_desc *list)
-{
+{
return (list->tlv_space == 0);
}
@@ -348,7 +348,7 @@
{
__u16 tlv_space = TLV_ALIGN(ntohs(list->tlv_ptr->tlv_len));
- list->tlv_ptr = (struct tlv_desc *)((char *)list->tlv_ptr + tlv_space);
+ list->tlv_ptr = (struct tlv_desc *)((char *)list->tlv_ptr + tlv_space);
list->tlv_space -= tlv_space;
}
@@ -372,15 +372,14 @@
#define TIPC_GENL_HDRLEN NLMSG_ALIGN(sizeof(struct tipc_genlmsghdr))
/*
- * Configuration messages exchanged via TIPC sockets use the TIPC configuration
- * message header, which is defined below. This structure is analogous
- * to the Netlink message header, but fields are stored in network byte order
- * and no padding is permitted between the header and the message data
+ * Configuration messages exchanged via TIPC sockets use the TIPC configuration
+ * message header, which is defined below. This structure is analogous
+ * to the Netlink message header, but fields are stored in network byte order
+ * and no padding is permitted between the header and the message data
* that follows.
*/
-struct tipc_cfg_msg_hdr
-{
+struct tipc_cfg_msg_hdr {
__be32 tcm_len; /* Message length (including header) */
__be16 tcm_type; /* Command type */
__be16 tcm_flags; /* Additional flags */