Merge tag 'samsung-dt-s3c64xx' of http://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt
From Kukjin Kim:
Add device tree support for S3C64XX
- add device tree infrastructure for s3c64xx
- add DT SoC file for s3c64xx
- add DT board file for FriendlyARM Mini6410 board
- add DT board file for SAMSUNG SMDK6410
Based on Common Clk Framework for S3C64XX
* tag 'samsung-dt-s3c64xx' of http://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
ARM: dts: Add dts file for S3C6410-based SMDK6410 board
ARM: dts: Add dts file for S3C6410-based Mini6410 board
ARM: dts: Add basic dts include files for Samsung S3C64xx SoCs
ARM: S3C64XX: Add board file for boot using Device Tree
gpio: samsung: Skip initialization if device tree is present
ARM: S3C64XX: Bypass legacy initialization when booting with DT
irqchip: vic: Parse interrupt and resume masks from device tree
ARM: S3C64XX: Remove old clock management code
ARM: S3C64XX: Migrate clock handling to Common Clock Framework
usb: ohci-s3c2410.c: Use clk_prepare_enable/clk_disable_unprepare
ARM: S3C64XX: Use clk_prepare_enable/clk_disable_unprepare in dma.c
ARM: SAMSUNG: Add soc_is_s3c6400/s3c6410 macros
Signed-off-by: Olof Johansson <olof@lixom.net>
diff --git a/Documentation/devicetree/bindings/arm/vic.txt b/Documentation/devicetree/bindings/arm/vic.txt
index 266716b..dd52721 100644
--- a/Documentation/devicetree/bindings/arm/vic.txt
+++ b/Documentation/devicetree/bindings/arm/vic.txt
@@ -18,6 +18,15 @@
Optional properties:
- interrupts : Interrupt source for parent controllers if the VIC is nested.
+- valid-mask : A one cell big bit mask of valid interrupt sources. Each bit
+ represents single interrupt source, starting from source 0 at LSb and ending
+ at source 31 at MSb. A bit that is set means that the source is wired and
+ clear means otherwise. If unspecified, defaults to all valid.
+- valid-wakeup-mask : A one cell big bit mask of interrupt sources that can be
+ configured as wake up source for the system. Order of bits is the same as for
+ valid-mask property. A set bit means that this interrupt source can be
+ configured as a wake up source for the system. If unspecied, defaults to all
+ interrupt sources configurable as wake up sources.
Example:
@@ -26,4 +35,7 @@
interrupt-controller;
#interrupt-cells = <1>;
reg = <0x60000 0x1000>;
+
+ valid-mask = <0xffffff7f>;
+ valid-wakeup-mask = <0x0000ff7f>;
};
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 3f7714d..76b025e 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -727,6 +727,7 @@
select ARM_VIC
select CLKDEV_LOOKUP
select CLKSRC_SAMSUNG_PWM
+ select COMMON_CLK
select CPU_V6
select GENERIC_CLOCKEVENTS
select GPIO_SAMSUNG
@@ -740,7 +741,6 @@
select S3C_DEV_NAND
select S3C_GPIO_TRACK
select SAMSUNG_ATAGS
- select SAMSUNG_CLKSRC
select SAMSUNG_GPIOLIB_4BIT
select SAMSUNG_WDT_RESET
select USB_ARCH_HAS_OHCI
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index e95af3f..7ec6985 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -195,6 +195,8 @@
ste-ccu8540.dtb \
ste-ccu9540.dtb
dtb-$(CONFIG_ARCH_S3C24XX) += s3c2416-smdk2416.dtb
+dtb-$(CONFIG_ARCH_S3C64XX) += s3c6410-mini6410.dtb \
+ s3c6410-smdk6410.dtb
dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \
emev2-kzm9d-reference.dtb \
r8a7740-armadillo800eva.dtb \
diff --git a/arch/arm/boot/dts/s3c6400.dtsi b/arch/arm/boot/dts/s3c6400.dtsi
new file mode 100644
index 0000000..a7d1c8e
--- /dev/null
+++ b/arch/arm/boot/dts/s3c6400.dtsi
@@ -0,0 +1,41 @@
+/*
+ * Samsung's S3C6400 SoC device tree source
+ *
+ * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
+ *
+ * Samsung's S3C6400 SoC device nodes are listed in this file. S3C6400
+ * based board files can include this file and provide values for board specfic
+ * bindings.
+ *
+ * Note: This file does not include device nodes for all the controllers in
+ * S3C6400 SoC. As device tree coverage for S3C6400 increases, additional
+ * nodes can be added to this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include "s3c64xx.dtsi"
+
+/ {
+ compatible = "samsung,s3c6400";
+};
+
+&vic0 {
+ valid-mask = <0xfffffe1f>;
+ valid-wakeup-mask = <0x00200004>;
+};
+
+&vic1 {
+ valid-mask = <0xffffffff>;
+ valid-wakeup-mask = <0x53020000>;
+};
+
+&soc {
+ clocks: clock-controller@7e00f000 {
+ compatible = "samsung,s3c6400-clock";
+ reg = <0x7e00f000 0x1000>;
+ #clock-cells = <1>;
+ };
+};
diff --git a/arch/arm/boot/dts/s3c6410-mini6410.dts b/arch/arm/boot/dts/s3c6410-mini6410.dts
new file mode 100644
index 0000000..57e00f9
--- /dev/null
+++ b/arch/arm/boot/dts/s3c6410-mini6410.dts
@@ -0,0 +1,228 @@
+/*
+ * Samsung's S3C6410 based Mini6410 board device tree source
+ *
+ * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
+ *
+ * Device tree source file for FriendlyARM Mini6410 board which is based on
+ * Samsung's S3C6410 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+#include "s3c6410.dtsi"
+
+/ {
+ model = "FriendlyARM Mini6410 board based on S3C6410";
+ compatible = "friendlyarm,mini6410", "samsung,s3c6410";
+
+ memory {
+ reg = <0x50000000 0x10000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttySAC0,115200n8 earlyprintk rootwait root=/dev/mmcblk0p1";
+ };
+
+ clocks {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fin_pll: oscillator@0 {
+ compatible = "fixed-clock";
+ reg = <0>;
+ clock-frequency = <12000000>;
+ clock-output-names = "fin_pll";
+ #clock-cells = <0>;
+ };
+
+ xusbxti: oscillator@1 {
+ compatible = "fixed-clock";
+ reg = <1>;
+ clock-output-names = "xusbxti";
+ clock-frequency = <48000000>;
+ #clock-cells = <0>;
+ };
+ };
+
+ srom-cs1@18000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x18000000 0x8000000>;
+ ranges;
+
+ ethernet@18000000 {
+ compatible = "davicom,dm9000";
+ reg = <0x18000000 0x2 0x18000004 0x2>;
+ interrupt-parent = <&gpn>;
+ interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
+ davicom,no-eeprom;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_keys>;
+ autorepeat;
+
+ button-k1 {
+ label = "K1";
+ gpios = <&gpn 0 GPIO_ACTIVE_LOW>;
+ linux,code = <2>;
+ debounce-interval = <20>;
+ };
+
+ button-k2 {
+ label = "K2";
+ gpios = <&gpn 1 GPIO_ACTIVE_LOW>;
+ linux,code = <3>;
+ debounce-interval = <20>;
+ };
+
+ button-k3 {
+ label = "K3";
+ gpios = <&gpn 2 GPIO_ACTIVE_LOW>;
+ linux,code = <4>;
+ debounce-interval = <20>;
+ };
+
+ button-k4 {
+ label = "K4";
+ gpios = <&gpn 3 GPIO_ACTIVE_LOW>;
+ linux,code = <5>;
+ debounce-interval = <20>;
+ };
+
+ button-k5 {
+ label = "K5";
+ gpios = <&gpn 4 GPIO_ACTIVE_LOW>;
+ linux,code = <6>;
+ debounce-interval = <20>;
+ };
+
+ button-k6 {
+ label = "K6";
+ gpios = <&gpn 5 GPIO_ACTIVE_LOW>;
+ linux,code = <7>;
+ debounce-interval = <20>;
+ };
+
+ button-k7 {
+ label = "K7";
+ gpios = <&gpl 11 GPIO_ACTIVE_LOW>;
+ linux,code = <8>;
+ debounce-interval = <20>;
+ };
+
+ button-k8 {
+ label = "K8";
+ gpios = <&gpl 12 GPIO_ACTIVE_LOW>;
+ linux,code = <9>;
+ debounce-interval = <20>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_leds>;
+
+ led-1 {
+ label = "LED1";
+ gpios = <&gpk 4 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ led-2 {
+ label = "LED2";
+ gpios = <&gpk 5 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "mmc0";
+ };
+
+ led-3 {
+ label = "LED3";
+ gpios = <&gpk 6 GPIO_ACTIVE_LOW>;
+ };
+
+ led-4 {
+ label = "LED4";
+ gpios = <&gpk 7 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ buzzer {
+ compatible = "pwm-beeper";
+ pwms = <&pwm 0 1000000 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm0_out>;
+ };
+};
+
+&sdhci0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
+ bus-width = <4>;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_data>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_data>, <&uart1_fctl>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_data>;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_data>;
+ status = "okay";
+};
+
+&pwm {
+ status = "okay";
+};
+
+&pinctrl0 {
+ gpio_leds: gpio-leds {
+ samsung,pins = "gpk-4", "gpk-5", "gpk-6", "gpk-7";
+ samsung,pin-pud = <PIN_PULL_NONE>;
+ };
+
+ gpio_keys: gpio-keys {
+ samsung,pins = "gpn-0", "gpn-1", "gpn-2", "gpn-3",
+ "gpn-4", "gpn-5", "gpl-11", "gpl-12";
+ samsung,pin-pud = <PIN_PULL_NONE>;
+ };
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_bus>;
+ status = "okay";
+
+ eeprom@50 {
+ compatible = "atmel,24c08";
+ reg = <0x50>;
+ pagesize = <16>;
+ };
+};
diff --git a/arch/arm/boot/dts/s3c6410-smdk6410.dts b/arch/arm/boot/dts/s3c6410-smdk6410.dts
new file mode 100644
index 0000000..ecf35ec
--- /dev/null
+++ b/arch/arm/boot/dts/s3c6410-smdk6410.dts
@@ -0,0 +1,103 @@
+/*
+ * Samsung S3C6410 based SMDK6410 board device tree source.
+ *
+ * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
+ *
+ * Device tree source file for SAMSUNG SMDK6410 board which is based on
+ * Samsung's S3C6410 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+#include "s3c6410.dtsi"
+
+/ {
+ model = "SAMSUNG SMDK6410 board based on S3C6410";
+ compatible = "samsung,mini6410", "samsung,s3c6410";
+
+ memory {
+ reg = <0x50000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttySAC0,115200n8 earlyprintk rootwait root=/dev/mmcblk0p1";
+ };
+
+ clocks {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fin_pll: oscillator@0 {
+ compatible = "fixed-clock";
+ reg = <0>;
+ clock-frequency = <12000000>;
+ clock-output-names = "fin_pll";
+ #clock-cells = <0>;
+ };
+
+ xusbxti: oscillator@1 {
+ compatible = "fixed-clock";
+ reg = <1>;
+ clock-output-names = "xusbxti";
+ clock-frequency = <48000000>;
+ #clock-cells = <0>;
+ };
+ };
+
+ srom-cs1@18000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x18000000 0x8000000>;
+ ranges;
+
+ ethernet@18000000 {
+ compatible = "smsc,lan9115";
+ reg = <0x18000000 0x10000>;
+ interrupt-parent = <&gpn>;
+ interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+ phy-mode = "mii";
+ reg-io-width = <4>;
+ smsc,force-internal-phy;
+ };
+ };
+};
+
+&sdhci0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
+ bus-width = <4>;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_data>, <&uart0_fctl>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_data>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_data>;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_data>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/s3c6410.dtsi b/arch/arm/boot/dts/s3c6410.dtsi
new file mode 100644
index 0000000..eb4226b
--- /dev/null
+++ b/arch/arm/boot/dts/s3c6410.dtsi
@@ -0,0 +1,57 @@
+/*
+ * Samsung's S3C6410 SoC device tree source
+ *
+ * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
+ *
+ * Samsung's S3C6410 SoC device nodes are listed in this file. S3C6410
+ * based board files can include this file and provide values for board specfic
+ * bindings.
+ *
+ * Note: This file does not include device nodes for all the controllers in
+ * S3C6410 SoC. As device tree coverage for S3C6410 increases, additional
+ * nodes can be added to this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include "s3c64xx.dtsi"
+
+/ {
+ compatible = "samsung,s3c6410";
+
+ aliases {
+ i2c1 = &i2c1;
+ };
+};
+
+&vic0 {
+ valid-mask = <0xffffff7f>;
+ valid-wakeup-mask = <0x00200004>;
+};
+
+&vic1 {
+ valid-mask = <0xffffffff>;
+ valid-wakeup-mask = <0x53020000>;
+};
+
+&soc {
+ clocks: clock-controller@7e00f000 {
+ compatible = "samsung,s3c6410-clock";
+ reg = <0x7e00f000 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ i2c1: i2c@7f00f000 {
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x7f00f000 0x1000>;
+ interrupt-parent = <&vic0>;
+ interrupts = <5>;
+ clock-names = "i2c";
+ clocks = <&clocks PCLK_IIC1>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+};
diff --git a/arch/arm/boot/dts/s3c64xx-pinctrl.dtsi b/arch/arm/boot/dts/s3c64xx-pinctrl.dtsi
new file mode 100644
index 0000000..b1197d8
--- /dev/null
+++ b/arch/arm/boot/dts/s3c64xx-pinctrl.dtsi
@@ -0,0 +1,687 @@
+/*
+ * Samsung's S3C64xx SoC series common device tree source
+ * - pin control-related definitions
+ *
+ * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
+ *
+ * Samsung's S3C64xx SoCs pin banks, pin-mux and pin-config options are
+ * listed as device tree nodes in this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define PIN_PULL_NONE 0
+#define PIN_PULL_DOWN 1
+#define PIN_PULL_UP 2
+
+&pinctrl0 {
+ /*
+ * Pin banks
+ */
+
+ gpa: gpa {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpb: gpb {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpc: gpc {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpd: gpd {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpe: gpe {
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpf: gpf {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpg: gpg {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gph: gph {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpi: gpi {
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpj: gpj {
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpk: gpk {
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpl: gpl {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpm: gpm {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpn: gpn {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpo: gpo {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpp: gpp {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpq: gpq {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ /*
+ * Pin groups
+ */
+
+ uart0_data: uart0-data {
+ samsung,pins = "gpa-0", "gpa-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <PIN_PULL_NONE>;
+ };
+
+ uart0_fctl: uart0-fctl {
+ samsung,pins = "gpa-2", "gpa-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <PIN_PULL_NONE>;
+ };
+
+ uart1_data: uart1-data {
+ samsung,pins = "gpa-4", "gpa-5";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <PIN_PULL_NONE>;
+ };
+
+ uart1_fctl: uart1-fctl {
+ samsung,pins = "gpa-6", "gpa-7";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <PIN_PULL_NONE>;
+ };
+
+ uart2_data: uart2-data {
+ samsung,pins = "gpb-0", "gpb-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <PIN_PULL_NONE>;
+ };
+
+ uart3_data: uart3-data {
+ samsung,pins = "gpb-2", "gpb-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <PIN_PULL_NONE>;
+ };
+
+ ext_dma_0: ext-dma-0 {
+ samsung,pins = "gpb-0", "gpb-1";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <PIN_PULL_NONE>;
+ };
+
+ ext_dma_1: ext-dma-1 {
+ samsung,pins = "gpb-2", "gpb-3";
+ samsung,pin-function = <4>;
+ samsung,pin-pud = <PIN_PULL_NONE>;
+ };
+
+ irda_data_0: irda-data-0 {
+ samsung,pins = "gpb-0", "gpb-1";
+ samsung,pin-function = <4>;
+ samsung,pin-pud = <PIN_PULL_NONE>;
+ };
+
+ irda_data_1: irda-data-1 {
+ samsung,pins = "gpb-2", "gpb-3";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <PIN_PULL_NONE>;
+ };
+
+ irda_sdbw: irda-sdbw {
+ samsung,pins = "gpb-4";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <PIN_PULL_NONE>;
+ };
+
+ i2c0_bus: i2c0-bus {
+ samsung,pins = "gpb-5", "gpb-6";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <PIN_PULL_UP>;
+ };
+
+ i2c1_bus: i2c1-bus {
+ /* S3C6410-only */
+ samsung,pins = "gpb-2", "gpb-3";
+ samsung,pin-function = <6>;
+ samsung,pin-pud = <PIN_PULL_UP>;
+ };
+
+ spi0_bus: spi0-bus {
+ samsung,pins = "gpc-0", "gpc-1", "gpc-2";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <PIN_PULL_UP>;
+ };
+
+ spi0_cs: spi0-cs {
+ samsung,pins = "gpc-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <PIN_PULL_NONE>;
+ };
+
+ spi1_bus: spi1-bus {
+ samsung,pins = "gpc-4", "gpc-5", "gpc-6";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <PIN_PULL_UP>;
+ };
+
+ spi1_cs: spi1-cs {
+ samsung,pins = "gpc-7";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <PIN_PULL_NONE>;
+ };
+
+ sd0_cmd: sd0-cmd {
+ samsung,pins = "gpg-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <PIN_PULL_NONE>;
+ };
+
+ sd0_clk: sd0-clk {
+ samsung,pins = "gpg-0";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <PIN_PULL_NONE>;
+ };
+
+ sd0_bus1: sd0-bus1 {
+ samsung,pins = "gpg-2";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <PIN_PULL_NONE>;
+ };
+
+ sd0_bus4: sd0-bus4 {
+ samsung,pins = "gpg-2", "gpg-3", "gpg-4", "gpg-5";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <PIN_PULL_NONE>;
+ };
+
+ sd0_cd: sd0-cd {
+ samsung,pins = "gpg-6";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <PIN_PULL_UP>;
+ };
+
+ sd1_cmd: sd1-cmd {
+ samsung,pins = "gph-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <PIN_PULL_NONE>;
+ };
+
+ sd1_clk: sd1-clk {
+ samsung,pins = "gph-0";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <PIN_PULL_NONE>;
+ };
+
+ sd1_bus1: sd1-bus1 {
+ samsung,pins = "gph-2";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <PIN_PULL_NONE>;
+ };
+
+ sd1_bus4: sd1-bus4 {
+ samsung,pins = "gph-2", "gph-3", "gph-4", "gph-5";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <PIN_PULL_NONE>;
+ };
+
+ sd1_bus8: sd1-bus8 {
+ samsung,pins = "gph-2", "gph-3", "gph-4", "gph-5",
+ "gph-6", "gph-7", "gph-8", "gph-9";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <PIN_PULL_NONE>;
+ };
+
+ sd1_cd: sd1-cd {
+ samsung,pins = "gpg-6";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <PIN_PULL_UP>;
+ };
+
+ sd2_cmd: sd2-cmd {
+ samsung,pins = "gpc-4";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <PIN_PULL_NONE>;
+ };
+
+ sd2_clk: sd2-clk {
+ samsung,pins = "gpc-5";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <PIN_PULL_NONE>;
+ };
+
+ sd2_bus1: sd2-bus1 {
+ samsung,pins = "gph-6";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <PIN_PULL_NONE>;
+ };
+
+ sd2_bus4: sd2-bus4 {
+ samsung,pins = "gph-6", "gph-7", "gph-8", "gph-9";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <PIN_PULL_NONE>;
+ };
+
+ i2s0_bus: i2s0-bus {
+ samsung,pins = "gpd-0", "gpd-2", "gpd-3", "gpd-4";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <PIN_PULL_NONE>;
+ };
+
+ i2s0_cdclk: i2s0-cdclk {
+ samsung,pins = "gpd-1";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <PIN_PULL_NONE>;
+ };
+
+ i2s1_bus: i2s1-bus {
+ samsung,pins = "gpe-0", "gpe-2", "gpe-3", "gpe-4";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <PIN_PULL_NONE>;
+ };
+
+ i2s1_cdclk: i2s1-cdclk {
+ samsung,pins = "gpe-1";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <PIN_PULL_NONE>;
+ };
+
+ i2s2_bus: i2s2-bus {
+ /* S3C6410-only */
+ samsung,pins = "gpc-4", "gpc-5", "gpc-6", "gph-6",
+ "gph-8", "gph-9";
+ samsung,pin-function = <5>;
+ samsung,pin-pud = <PIN_PULL_NONE>;
+ };
+
+ i2s2_cdclk: i2s2-cdclk {
+ /* S3C6410-only */
+ samsung,pins = "gph-7";
+ samsung,pin-function = <5>;
+ samsung,pin-pud = <PIN_PULL_NONE>;
+ };
+
+ pcm0_bus: pcm0-bus {
+ samsung,pins = "gpd-0", "gpd-2", "gpd-3", "gpd-4";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <PIN_PULL_NONE>;
+ };
+
+ pcm0_extclk: pcm0-extclk {
+ samsung,pins = "gpd-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <PIN_PULL_NONE>;
+ };
+
+ pcm1_bus: pcm1-bus {
+ samsung,pins = "gpe-0", "gpe-2", "gpe-3", "gpe-4";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <PIN_PULL_NONE>;
+ };
+
+ pcm1_extclk: pcm1-extclk {
+ samsung,pins = "gpe-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <PIN_PULL_NONE>;
+ };
+
+ ac97_bus_0: ac97-bus-0 {
+ samsung,pins = "gpd-0", "gpd-1", "gpd-2", "gpd-3", "gpd-4";
+ samsung,pin-function = <4>;
+ samsung,pin-pud = <PIN_PULL_NONE>;
+ };
+
+ ac97_bus_1: ac97-bus-1 {
+ samsung,pins = "gpe-0", "gpe-1", "gpe-2", "gpe-3", "gpe-4";
+ samsung,pin-function = <4>;
+ samsung,pin-pud = <PIN_PULL_NONE>;
+ };
+
+ cam_port: cam-port {
+ samsung,pins = "gpf-0", "gpf-1", "gpf-2", "gpf-4",
+ "gpf-5", "gpf-6", "gpf-7", "gpf-8",
+ "gpf-9", "gpf-10", "gpf-11", "gpf-12";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <PIN_PULL_NONE>;
+ };
+
+ cam_rst: cam-rst {
+ samsung,pins = "gpf-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <PIN_PULL_NONE>;
+ };
+
+ cam_field: cam-field {
+ /* S3C6410-only */
+ samsung,pins = "gpb-4";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <PIN_PULL_NONE>;
+ };
+
+ pwm_extclk: pwm-extclk {
+ samsung,pins = "gpf-13";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <PIN_PULL_NONE>;
+ };
+
+ pwm0_out: pwm0-out {
+ samsung,pins = "gpf-14";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <PIN_PULL_NONE>;
+ };
+
+ pwm1_out: pwm1-out {
+ samsung,pins = "gpf-15";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <PIN_PULL_NONE>;
+ };
+
+ clkout0: clkout-0 {
+ samsung,pins = "gpf-14";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <PIN_PULL_NONE>;
+ };
+
+ keypad_col0_0: keypad-col0-0 {
+ samsung,pins = "gph-0";
+ samsung,pin-function = <4>;
+ samsung,pin-pud = <PIN_PULL_NONE>;
+ };
+
+ keypad_col1_0: keypad-col1-0 {
+ samsung,pins = "gph-1";
+ samsung,pin-function = <4>;
+ samsung,pin-pud = <PIN_PULL_NONE>;
+ };
+
+ keypad_col2_0: keypad-col2-0 {
+ samsung,pins = "gph-2";
+ samsung,pin-function = <4>;
+ samsung,pin-pud = <PIN_PULL_NONE>;
+ };
+
+ keypad_col3_0: keypad-col3-0 {
+ samsung,pins = "gph-3";
+ samsung,pin-function = <4>;
+ samsung,pin-pud = <PIN_PULL_NONE>;
+ };
+
+ keypad_col4_0: keypad-col4-0 {
+ samsung,pins = "gph-4";
+ samsung,pin-function = <4>;
+ samsung,pin-pud = <PIN_PULL_NONE>;
+ };
+
+ keypad_col5_0: keypad-col5-0 {
+ samsung,pins = "gph-5";
+ samsung,pin-function = <4>;
+ samsung,pin-pud = <PIN_PULL_NONE>;
+ };
+
+ keypad_col6_0: keypad-col6-0 {
+ samsung,pins = "gph-6";
+ samsung,pin-function = <4>;
+ samsung,pin-pud = <PIN_PULL_NONE>;
+ };
+
+ keypad_col7_0: keypad-col7-0 {
+ samsung,pins = "gph-7";
+ samsung,pin-function = <4>;
+ samsung,pin-pud = <PIN_PULL_NONE>;
+ };
+
+ keypad_col0_1: keypad-col0-1 {
+ samsung,pins = "gpl-0";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <PIN_PULL_NONE>;
+ };
+
+ keypad_col1_1: keypad-col1-1 {
+ samsung,pins = "gpl-1";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <PIN_PULL_NONE>;
+ };
+
+ keypad_col2_1: keypad-col2-1 {
+ samsung,pins = "gpl-2";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <PIN_PULL_NONE>;
+ };
+
+ keypad_col3_1: keypad-col3-1 {
+ samsung,pins = "gpl-3";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <PIN_PULL_NONE>;
+ };
+
+ keypad_col4_1: keypad-col4-1 {
+ samsung,pins = "gpl-4";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <PIN_PULL_NONE>;
+ };
+
+ keypad_col5_1: keypad-col5-1 {
+ samsung,pins = "gpl-5";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <PIN_PULL_NONE>;
+ };
+
+ keypad_col6_1: keypad-col6-1 {
+ samsung,pins = "gpl-6";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <PIN_PULL_NONE>;
+ };
+
+ keypad_col7_1: keypad-col7-1 {
+ samsung,pins = "gpl-7";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <PIN_PULL_NONE>;
+ };
+
+ keypad_row0_0: keypad-row0-0 {
+ samsung,pins = "gpk-8";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <PIN_PULL_NONE>;
+ };
+
+ keypad_row1_0: keypad-row1-0 {
+ samsung,pins = "gpk-9";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <PIN_PULL_NONE>;
+ };
+
+ keypad_row2_0: keypad-row2-0 {
+ samsung,pins = "gpk-10";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <PIN_PULL_NONE>;
+ };
+
+ keypad_row3_0: keypad-row3-0 {
+ samsung,pins = "gpk-11";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <PIN_PULL_NONE>;
+ };
+
+ keypad_row4_0: keypad-row4-0 {
+ samsung,pins = "gpk-12";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <PIN_PULL_NONE>;
+ };
+
+ keypad_row5_0: keypad-row5-0 {
+ samsung,pins = "gpk-13";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <PIN_PULL_NONE>;
+ };
+
+ keypad_row6_0: keypad-row6-0 {
+ samsung,pins = "gpk-14";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <PIN_PULL_NONE>;
+ };
+
+ keypad_row7_0: keypad-row7-0 {
+ samsung,pins = "gpk-15";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <PIN_PULL_NONE>;
+ };
+
+ keypad_row0_1: keypad-row0-1 {
+ samsung,pins = "gpn-0";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <PIN_PULL_NONE>;
+ };
+
+ keypad_row1_1: keypad-row1-1 {
+ samsung,pins = "gpn-1";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <PIN_PULL_NONE>;
+ };
+
+ keypad_row2_1: keypad-row2-1 {
+ samsung,pins = "gpn-2";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <PIN_PULL_NONE>;
+ };
+
+ keypad_row3_1: keypad-row3-1 {
+ samsung,pins = "gpn-3";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <PIN_PULL_NONE>;
+ };
+
+ keypad_row4_1: keypad-row4-1 {
+ samsung,pins = "gpn-4";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <PIN_PULL_NONE>;
+ };
+
+ keypad_row5_1: keypad-row5-1 {
+ samsung,pins = "gpn-5";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <PIN_PULL_NONE>;
+ };
+
+ keypad_row6_1: keypad-row6-1 {
+ samsung,pins = "gpn-6";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <PIN_PULL_NONE>;
+ };
+
+ keypad_row7_1: keypad-row7-1 {
+ samsung,pins = "gpn-7";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <PIN_PULL_NONE>;
+ };
+
+ lcd_ctrl: lcd-ctrl {
+ samsung,pins = "gpj-8", "gpj-9", "gpj-10", "gpj-11";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <PIN_PULL_NONE>;
+ };
+
+ lcd_data16: lcd-data-width16 {
+ samsung,pins = "gpi-3", "gpi-4", "gpi-5", "gpi-6",
+ "gpi-7", "gpi-10", "gpi-11", "gpi-12",
+ "gpi-13", "gpi-14", "gpi-15", "gpj-3",
+ "gpj-4", "gpj-5", "gpj-6", "gpj-7";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <PIN_PULL_NONE>;
+ };
+
+ lcd_data18: lcd-data-width18 {
+ samsung,pins = "gpi-2", "gpi-3", "gpi-4", "gpi-5",
+ "gpi-6", "gpi-7", "gpi-10", "gpi-11",
+ "gpi-12", "gpi-13", "gpi-14", "gpi-15",
+ "gpj-2", "gpj-3", "gpj-4", "gpj-5",
+ "gpj-6", "gpj-7";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <PIN_PULL_NONE>;
+ };
+
+ lcd_data24: lcd-data-width24 {
+ samsung,pins = "gpi-0", "gpi-1", "gpi-2", "gpi-3",
+ "gpi-4", "gpi-5", "gpi-6", "gpi-7",
+ "gpi-8", "gpi-9", "gpi-10", "gpi-11",
+ "gpi-12", "gpi-13", "gpi-14", "gpi-15",
+ "gpj-0", "gpj-1", "gpj-2", "gpj-3",
+ "gpj-4", "gpj-5", "gpj-6", "gpj-7";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <PIN_PULL_NONE>;
+ };
+
+ hsi_bus: hsi-bus {
+ samsung,pins = "gpk-0", "gpk-1", "gpk-2", "gpk-3",
+ "gpk-4", "gpk-5", "gpk-6", "gpk-7";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <PIN_PULL_NONE>;
+ };
+};
diff --git a/arch/arm/boot/dts/s3c64xx.dtsi b/arch/arm/boot/dts/s3c64xx.dtsi
new file mode 100644
index 0000000..4e3be4d
--- /dev/null
+++ b/arch/arm/boot/dts/s3c64xx.dtsi
@@ -0,0 +1,199 @@
+/*
+ * Samsung's S3C64xx SoC series common device tree source
+ *
+ * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
+ *
+ * Samsung's S3C64xx SoC series device nodes are listed in this file.
+ * Particular SoCs from S3C64xx series can include this file and provide
+ * values for SoCs specfic bindings.
+ *
+ * Note: This file does not include device nodes for all the controllers in
+ * S3C64xx SoCs. As device tree coverage for S3C64xx increases, additional
+ * nodes can be added to this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/clock/samsung,s3c64xx-clock.h>
+
+/ {
+ aliases {
+ i2c0 = &i2c0;
+ pinctrl0 = &pinctrl0;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,arm1176jzf-s", "arm,arm1176";
+ reg = <0x0>;
+ };
+ };
+
+ soc: soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ vic0: interrupt-controller@71200000 {
+ compatible = "arm,pl192-vic";
+ interrupt-controller;
+ reg = <0x71200000 0x1000>;
+ #interrupt-cells = <1>;
+ };
+
+ vic1: interrupt-controller@71300000 {
+ compatible = "arm,pl192-vic";
+ interrupt-controller;
+ reg = <0x71300000 0x1000>;
+ #interrupt-cells = <1>;
+ };
+
+ sdhci0: sdhci@7c200000 {
+ compatible = "samsung,s3c6410-sdhci";
+ reg = <0x7c200000 0x100>;
+ interrupt-parent = <&vic1>;
+ interrupts = <24>;
+ clock-names = "hsmmc", "mmc_busclk.0", "mmc_busclk.2";
+ clocks = <&clocks HCLK_HSMMC0>, <&clocks HCLK_HSMMC0>,
+ <&clocks SCLK_MMC0>;
+ status = "disabled";
+ };
+
+ sdhci1: sdhci@7c300000 {
+ compatible = "samsung,s3c6410-sdhci";
+ reg = <0x7c300000 0x100>;
+ interrupt-parent = <&vic1>;
+ interrupts = <25>;
+ clock-names = "hsmmc", "mmc_busclk.0", "mmc_busclk.2";
+ clocks = <&clocks HCLK_HSMMC1>, <&clocks HCLK_HSMMC1>,
+ <&clocks SCLK_MMC1>;
+ status = "disabled";
+ };
+
+ sdhci2: sdhci@7c400000 {
+ compatible = "samsung,s3c6410-sdhci";
+ reg = <0x7c400000 0x100>;
+ interrupt-parent = <&vic1>;
+ interrupts = <17>;
+ clock-names = "hsmmc", "mmc_busclk.0", "mmc_busclk.2";
+ clocks = <&clocks HCLK_HSMMC2>, <&clocks HCLK_HSMMC2>,
+ <&clocks SCLK_MMC2>;
+ status = "disabled";
+ };
+
+ watchdog: watchdog@7e004000 {
+ compatible = "samsung,s3c2410-wdt";
+ reg = <0x7e004000 0x1000>;
+ interrupt-parent = <&vic0>;
+ interrupts = <26>;
+ clock-names = "watchdog";
+ clocks = <&clocks PCLK_WDT>;
+ status = "disabled";
+ };
+
+ i2c0: i2c@7f004000 {
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x7f004000 0x1000>;
+ interrupt-parent = <&vic1>;
+ interrupts = <18>;
+ clock-names = "i2c";
+ clocks = <&clocks PCLK_IIC0>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ uart0: serial@7f005000 {
+ compatible = "samsung,s3c6400-uart";
+ reg = <0x7f005000 0x100>;
+ interrupt-parent = <&vic1>;
+ interrupts = <5>;
+ clock-names = "uart", "clk_uart_baud2",
+ "clk_uart_baud3";
+ clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>,
+ <&clocks SCLK_UART>;
+ status = "disabled";
+ };
+
+ uart1: serial@7f005400 {
+ compatible = "samsung,s3c6400-uart";
+ reg = <0x7f005400 0x100>;
+ interrupt-parent = <&vic1>;
+ interrupts = <6>;
+ clock-names = "uart", "clk_uart_baud2",
+ "clk_uart_baud3";
+ clocks = <&clocks PCLK_UART1>, <&clocks PCLK_UART1>,
+ <&clocks SCLK_UART>;
+ status = "disabled";
+ };
+
+ uart2: serial@7f005800 {
+ compatible = "samsung,s3c6400-uart";
+ reg = <0x7f005800 0x100>;
+ interrupt-parent = <&vic1>;
+ interrupts = <7>;
+ clock-names = "uart", "clk_uart_baud2",
+ "clk_uart_baud3";
+ clocks = <&clocks PCLK_UART2>, <&clocks PCLK_UART2>,
+ <&clocks SCLK_UART>;
+ status = "disabled";
+ };
+
+ uart3: serial@7f005c00 {
+ compatible = "samsung,s3c6400-uart";
+ reg = <0x7f005c00 0x100>;
+ interrupt-parent = <&vic1>;
+ interrupts = <8>;
+ clock-names = "uart", "clk_uart_baud2",
+ "clk_uart_baud3";
+ clocks = <&clocks PCLK_UART3>, <&clocks PCLK_UART3>,
+ <&clocks SCLK_UART>;
+ status = "disabled";
+ };
+
+ pwm: pwm@7f006000 {
+ compatible = "samsung,s3c6400-pwm";
+ reg = <0x7f006000 0x1000>;
+ interrupt-parent = <&vic0>;
+ interrupts = <23>, <24>, <25>, <27>, <28>;
+ clock-names = "timers";
+ clocks = <&clocks PCLK_PWM>;
+ samsung,pwm-outputs = <0>, <1>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ pinctrl0: pinctrl@7f008000 {
+ compatible = "samsung,s3c64xx-pinctrl";
+ reg = <0x7f008000 0x1000>;
+ interrupt-parent = <&vic1>;
+ interrupts = <21>;
+
+ pctrl_int_map: pinctrl-interrupt-map {
+ interrupt-map = <0 &vic0 0>,
+ <1 &vic0 1>,
+ <2 &vic1 0>,
+ <3 &vic1 1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+
+ wakeup-interrupt-controller {
+ compatible = "samsung,s3c64xx-wakeup-eint";
+ interrupts = <0>, <1>, <2>, <3>;
+ interrupt-parent = <&pctrl_int_map>;
+ };
+ };
+ };
+};
+
+#include "s3c64xx-pinctrl.dtsi"
diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
index 041da51..bd14e3a 100644
--- a/arch/arm/mach-s3c64xx/Kconfig
+++ b/arch/arm/mach-s3c64xx/Kconfig
@@ -306,3 +306,19 @@
select SAMSUNG_GPIO_EXTRA128
help
Machine support for the Wolfson Cragganmore S3C6410 variant.
+
+config MACH_S3C64XX_DT
+ bool "Samsung S3C6400/S3C6410 machine using Device Tree"
+ select CLKSRC_OF
+ select CPU_S3C6400
+ select CPU_S3C6410
+ select PINCTRL
+ select PINCTRL_S3C64XX
+ select USE_OF
+ help
+ Machine support for Samsung S3C6400/S3C6410 machines with Device Tree
+ enabled.
+ Select this if a fdt blob is available for your S3C64XX SoC based
+ board.
+ Note: This is under development and not all peripherals can be
+ supported with this machine file.
diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile
index 31d0c91..6faedcf 100644
--- a/arch/arm/mach-s3c64xx/Makefile
+++ b/arch/arm/mach-s3c64xx/Makefile
@@ -12,7 +12,7 @@
# Core
-obj-y += common.o clock.o
+obj-y += common.o
# Core support
@@ -57,3 +57,4 @@
obj-$(CONFIG_MACH_SMDK6400) += mach-smdk6400.o
obj-$(CONFIG_MACH_SMDK6410) += mach-smdk6410.o
obj-$(CONFIG_MACH_WLF_CRAGG_6410) += mach-crag6410.o mach-crag6410-module.o
+obj-$(CONFIG_MACH_S3C64XX_DT) += mach-s3c64xx-dt.o
diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-s3c64xx/clock.c
deleted file mode 100644
index c1bcc4a6..0000000
--- a/arch/arm/mach-s3c64xx/clock.c
+++ /dev/null
@@ -1,1007 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/clock.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C64XX Base clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-
-#include <mach/regs-clock.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/cpu-freq.h>
-#include <plat/clock.h>
-#include <plat/clock-clksrc.h>
-#include <plat/pll.h>
-
-#include "regs-sys.h"
-
-/* fin_apll, fin_mpll and fin_epll are all the same clock, which we call
- * ext_xtal_mux for want of an actual name from the manual.
-*/
-
-static struct clk clk_ext_xtal_mux = {
- .name = "ext_xtal",
-};
-
-#define clk_fin_apll clk_ext_xtal_mux
-#define clk_fin_mpll clk_ext_xtal_mux
-#define clk_fin_epll clk_ext_xtal_mux
-
-#define clk_fout_mpll clk_mpll
-#define clk_fout_epll clk_epll
-
-struct clk clk_h2 = {
- .name = "hclk2",
- .rate = 0,
-};
-
-struct clk clk_27m = {
- .name = "clk_27m",
- .rate = 27000000,
-};
-
-static int clk_48m_ctrl(struct clk *clk, int enable)
-{
- unsigned long flags;
- u32 val;
-
- /* can't rely on clock lock, this register has other usages */
- local_irq_save(flags);
-
- val = __raw_readl(S3C64XX_OTHERS);
- if (enable)
- val |= S3C64XX_OTHERS_USBMASK;
- else
- val &= ~S3C64XX_OTHERS_USBMASK;
-
- __raw_writel(val, S3C64XX_OTHERS);
- local_irq_restore(flags);
-
- return 0;
-}
-
-struct clk clk_48m = {
- .name = "clk_48m",
- .rate = 48000000,
- .enable = clk_48m_ctrl,
-};
-
-struct clk clk_xusbxti = {
- .name = "xusbxti",
- .rate = 48000000,
-};
-
-static int inline s3c64xx_gate(void __iomem *reg,
- struct clk *clk,
- int enable)
-{
- unsigned int ctrlbit = clk->ctrlbit;
- u32 con;
-
- con = __raw_readl(reg);
-
- if (enable)
- con |= ctrlbit;
- else
- con &= ~ctrlbit;
-
- __raw_writel(con, reg);
- return 0;
-}
-
-static int s3c64xx_pclk_ctrl(struct clk *clk, int enable)
-{
- return s3c64xx_gate(S3C_PCLK_GATE, clk, enable);
-}
-
-static int s3c64xx_hclk_ctrl(struct clk *clk, int enable)
-{
- return s3c64xx_gate(S3C_HCLK_GATE, clk, enable);
-}
-
-int s3c64xx_sclk_ctrl(struct clk *clk, int enable)
-{
- return s3c64xx_gate(S3C_SCLK_GATE, clk, enable);
-}
-
-static struct clk init_clocks_off[] = {
- {
- .name = "nand",
- .parent = &clk_h,
- }, {
- .name = "rtc",
- .parent = &clk_p,
- .enable = s3c64xx_pclk_ctrl,
- .ctrlbit = S3C_CLKCON_PCLK_RTC,
- }, {
- .name = "adc",
- .parent = &clk_p,
- .enable = s3c64xx_pclk_ctrl,
- .ctrlbit = S3C_CLKCON_PCLK_TSADC,
- }, {
- .name = "i2c",
- .devname = "s3c2440-i2c.0",
- .parent = &clk_p,
- .enable = s3c64xx_pclk_ctrl,
- .ctrlbit = S3C_CLKCON_PCLK_IIC,
- }, {
- .name = "i2c",
- .devname = "s3c2440-i2c.1",
- .parent = &clk_p,
- .enable = s3c64xx_pclk_ctrl,
- .ctrlbit = S3C6410_CLKCON_PCLK_I2C1,
- }, {
- .name = "keypad",
- .parent = &clk_p,
- .enable = s3c64xx_pclk_ctrl,
- .ctrlbit = S3C_CLKCON_PCLK_KEYPAD,
- }, {
- .name = "spi",
- .devname = "s3c6410-spi.0",
- .parent = &clk_p,
- .enable = s3c64xx_pclk_ctrl,
- .ctrlbit = S3C_CLKCON_PCLK_SPI0,
- }, {
- .name = "spi",
- .devname = "s3c6410-spi.1",
- .parent = &clk_p,
- .enable = s3c64xx_pclk_ctrl,
- .ctrlbit = S3C_CLKCON_PCLK_SPI1,
- }, {
- .name = "48m",
- .devname = "s3c-sdhci.0",
- .parent = &clk_48m,
- .enable = s3c64xx_sclk_ctrl,
- .ctrlbit = S3C_CLKCON_SCLK_MMC0_48,
- }, {
- .name = "48m",
- .devname = "s3c-sdhci.1",
- .parent = &clk_48m,
- .enable = s3c64xx_sclk_ctrl,
- .ctrlbit = S3C_CLKCON_SCLK_MMC1_48,
- }, {
- .name = "48m",
- .devname = "s3c-sdhci.2",
- .parent = &clk_48m,
- .enable = s3c64xx_sclk_ctrl,
- .ctrlbit = S3C_CLKCON_SCLK_MMC2_48,
- }, {
- .name = "ac97",
- .parent = &clk_p,
- .ctrlbit = S3C_CLKCON_PCLK_AC97,
- }, {
- .name = "cfcon",
- .parent = &clk_h,
- .enable = s3c64xx_hclk_ctrl,
- .ctrlbit = S3C_CLKCON_HCLK_IHOST,
- }, {
- .name = "dma0",
- .parent = &clk_h,
- .enable = s3c64xx_hclk_ctrl,
- .ctrlbit = S3C_CLKCON_HCLK_DMA0,
- }, {
- .name = "dma1",
- .parent = &clk_h,
- .enable = s3c64xx_hclk_ctrl,
- .ctrlbit = S3C_CLKCON_HCLK_DMA1,
- }, {
- .name = "3dse",
- .parent = &clk_h,
- .enable = s3c64xx_hclk_ctrl,
- .ctrlbit = S3C_CLKCON_HCLK_3DSE,
- }, {
- .name = "hclk_secur",
- .parent = &clk_h,
- .enable = s3c64xx_hclk_ctrl,
- .ctrlbit = S3C_CLKCON_HCLK_SECUR,
- }, {
- .name = "sdma1",
- .parent = &clk_h,
- .enable = s3c64xx_hclk_ctrl,
- .ctrlbit = S3C_CLKCON_HCLK_SDMA1,
- }, {
- .name = "sdma0",
- .parent = &clk_h,
- .enable = s3c64xx_hclk_ctrl,
- .ctrlbit = S3C_CLKCON_HCLK_SDMA0,
- }, {
- .name = "hclk_jpeg",
- .parent = &clk_h,
- .enable = s3c64xx_hclk_ctrl,
- .ctrlbit = S3C_CLKCON_HCLK_JPEG,
- }, {
- .name = "camif",
- .parent = &clk_h,
- .enable = s3c64xx_hclk_ctrl,
- .ctrlbit = S3C_CLKCON_HCLK_CAMIF,
- }, {
- .name = "hclk_scaler",
- .parent = &clk_h,
- .enable = s3c64xx_hclk_ctrl,
- .ctrlbit = S3C_CLKCON_HCLK_SCALER,
- }, {
- .name = "2d",
- .parent = &clk_h,
- .enable = s3c64xx_hclk_ctrl,
- .ctrlbit = S3C_CLKCON_HCLK_2D,
- }, {
- .name = "tv",
- .parent = &clk_h,
- .enable = s3c64xx_hclk_ctrl,
- .ctrlbit = S3C_CLKCON_HCLK_TV,
- }, {
- .name = "post0",
- .parent = &clk_h,
- .enable = s3c64xx_hclk_ctrl,
- .ctrlbit = S3C_CLKCON_HCLK_POST0,
- }, {
- .name = "rot",
- .parent = &clk_h,
- .enable = s3c64xx_hclk_ctrl,
- .ctrlbit = S3C_CLKCON_HCLK_ROT,
- }, {
- .name = "hclk_mfc",
- .parent = &clk_h,
- .enable = s3c64xx_hclk_ctrl,
- .ctrlbit = S3C_CLKCON_HCLK_MFC,
- }, {
- .name = "pclk_mfc",
- .parent = &clk_p,
- .enable = s3c64xx_pclk_ctrl,
- .ctrlbit = S3C_CLKCON_PCLK_MFC,
- }, {
- .name = "dac27",
- .enable = s3c64xx_sclk_ctrl,
- .ctrlbit = S3C_CLKCON_SCLK_DAC27,
- }, {
- .name = "tv27",
- .enable = s3c64xx_sclk_ctrl,
- .ctrlbit = S3C_CLKCON_SCLK_TV27,
- }, {
- .name = "scaler27",
- .enable = s3c64xx_sclk_ctrl,
- .ctrlbit = S3C_CLKCON_SCLK_SCALER27,
- }, {
- .name = "sclk_scaler",
- .enable = s3c64xx_sclk_ctrl,
- .ctrlbit = S3C_CLKCON_SCLK_SCALER,
- }, {
- .name = "post0_27",
- .enable = s3c64xx_sclk_ctrl,
- .ctrlbit = S3C_CLKCON_SCLK_POST0_27,
- }, {
- .name = "secur",
- .enable = s3c64xx_sclk_ctrl,
- .ctrlbit = S3C_CLKCON_SCLK_SECUR,
- }, {
- .name = "sclk_mfc",
- .enable = s3c64xx_sclk_ctrl,
- .ctrlbit = S3C_CLKCON_SCLK_MFC,
- }, {
- .name = "sclk_jpeg",
- .enable = s3c64xx_sclk_ctrl,
- .ctrlbit = S3C_CLKCON_SCLK_JPEG,
- },
-};
-
-static struct clk clk_48m_spi0 = {
- .name = "spi_48m",
- .devname = "s3c6410-spi.0",
- .parent = &clk_48m,
- .enable = s3c64xx_sclk_ctrl,
- .ctrlbit = S3C_CLKCON_SCLK_SPI0_48,
-};
-
-static struct clk clk_48m_spi1 = {
- .name = "spi_48m",
- .devname = "s3c6410-spi.1",
- .parent = &clk_48m,
- .enable = s3c64xx_sclk_ctrl,
- .ctrlbit = S3C_CLKCON_SCLK_SPI1_48,
-};
-
-static struct clk clk_i2s0 = {
- .name = "iis",
- .devname = "samsung-i2s.0",
- .parent = &clk_p,
- .enable = s3c64xx_pclk_ctrl,
- .ctrlbit = S3C_CLKCON_PCLK_IIS0,
-};
-
-static struct clk clk_i2s1 = {
- .name = "iis",
- .devname = "samsung-i2s.1",
- .parent = &clk_p,
- .enable = s3c64xx_pclk_ctrl,
- .ctrlbit = S3C_CLKCON_PCLK_IIS1,
-};
-
-#ifdef CONFIG_CPU_S3C6410
-static struct clk clk_i2s2 = {
- .name = "iis",
- .devname = "samsung-i2s.2",
- .parent = &clk_p,
- .enable = s3c64xx_pclk_ctrl,
- .ctrlbit = S3C6410_CLKCON_PCLK_IIS2,
-};
-#endif
-
-static struct clk init_clocks[] = {
- {
- .name = "lcd",
- .parent = &clk_h,
- .enable = s3c64xx_hclk_ctrl,
- .ctrlbit = S3C_CLKCON_HCLK_LCD,
- }, {
- .name = "gpio",
- .parent = &clk_p,
- .enable = s3c64xx_pclk_ctrl,
- .ctrlbit = S3C_CLKCON_PCLK_GPIO,
- }, {
- .name = "usb-host",
- .parent = &clk_h,
- .enable = s3c64xx_hclk_ctrl,
- .ctrlbit = S3C_CLKCON_HCLK_UHOST,
- }, {
- .name = "otg",
- .parent = &clk_h,
- .enable = s3c64xx_hclk_ctrl,
- .ctrlbit = S3C_CLKCON_HCLK_USB,
- }, {
- .name = "timers",
- .parent = &clk_p,
- .enable = s3c64xx_pclk_ctrl,
- .ctrlbit = S3C_CLKCON_PCLK_PWM,
- }, {
- .name = "uart",
- .devname = "s3c6400-uart.0",
- .parent = &clk_p,
- .enable = s3c64xx_pclk_ctrl,
- .ctrlbit = S3C_CLKCON_PCLK_UART0,
- }, {
- .name = "uart",
- .devname = "s3c6400-uart.1",
- .parent = &clk_p,
- .enable = s3c64xx_pclk_ctrl,
- .ctrlbit = S3C_CLKCON_PCLK_UART1,
- }, {
- .name = "uart",
- .devname = "s3c6400-uart.2",
- .parent = &clk_p,
- .enable = s3c64xx_pclk_ctrl,
- .ctrlbit = S3C_CLKCON_PCLK_UART2,
- }, {
- .name = "uart",
- .devname = "s3c6400-uart.3",
- .parent = &clk_p,
- .enable = s3c64xx_pclk_ctrl,
- .ctrlbit = S3C_CLKCON_PCLK_UART3,
- }, {
- .name = "watchdog",
- .parent = &clk_p,
- .ctrlbit = S3C_CLKCON_PCLK_WDT,
- },
-};
-
-static struct clk clk_hsmmc0 = {
- .name = "hsmmc",
- .devname = "s3c-sdhci.0",
- .parent = &clk_h,
- .enable = s3c64xx_hclk_ctrl,
- .ctrlbit = S3C_CLKCON_HCLK_HSMMC0,
-};
-
-static struct clk clk_hsmmc1 = {
- .name = "hsmmc",
- .devname = "s3c-sdhci.1",
- .parent = &clk_h,
- .enable = s3c64xx_hclk_ctrl,
- .ctrlbit = S3C_CLKCON_HCLK_HSMMC1,
-};
-
-static struct clk clk_hsmmc2 = {
- .name = "hsmmc",
- .devname = "s3c-sdhci.2",
- .parent = &clk_h,
- .enable = s3c64xx_hclk_ctrl,
- .ctrlbit = S3C_CLKCON_HCLK_HSMMC2,
-};
-
-static struct clk clk_fout_apll = {
- .name = "fout_apll",
-};
-
-static struct clk *clk_src_apll_list[] = {
- [0] = &clk_fin_apll,
- [1] = &clk_fout_apll,
-};
-
-static struct clksrc_sources clk_src_apll = {
- .sources = clk_src_apll_list,
- .nr_sources = ARRAY_SIZE(clk_src_apll_list),
-};
-
-static struct clksrc_clk clk_mout_apll = {
- .clk = {
- .name = "mout_apll",
- },
- .reg_src = { .reg = S3C_CLK_SRC, .shift = 0, .size = 1 },
- .sources = &clk_src_apll,
-};
-
-static struct clk *clk_src_epll_list[] = {
- [0] = &clk_fin_epll,
- [1] = &clk_fout_epll,
-};
-
-static struct clksrc_sources clk_src_epll = {
- .sources = clk_src_epll_list,
- .nr_sources = ARRAY_SIZE(clk_src_epll_list),
-};
-
-static struct clksrc_clk clk_mout_epll = {
- .clk = {
- .name = "mout_epll",
- },
- .reg_src = { .reg = S3C_CLK_SRC, .shift = 2, .size = 1 },
- .sources = &clk_src_epll,
-};
-
-static struct clk *clk_src_mpll_list[] = {
- [0] = &clk_fin_mpll,
- [1] = &clk_fout_mpll,
-};
-
-static struct clksrc_sources clk_src_mpll = {
- .sources = clk_src_mpll_list,
- .nr_sources = ARRAY_SIZE(clk_src_mpll_list),
-};
-
-static struct clksrc_clk clk_mout_mpll = {
- .clk = {
- .name = "mout_mpll",
- },
- .reg_src = { .reg = S3C_CLK_SRC, .shift = 1, .size = 1 },
- .sources = &clk_src_mpll,
-};
-
-static unsigned int armclk_mask;
-
-static unsigned long s3c64xx_clk_arm_get_rate(struct clk *clk)
-{
- unsigned long rate = clk_get_rate(clk->parent);
- u32 clkdiv;
-
- /* divisor mask starts at bit0, so no need to shift */
- clkdiv = __raw_readl(S3C_CLK_DIV0) & armclk_mask;
-
- return rate / (clkdiv + 1);
-}
-
-static unsigned long s3c64xx_clk_arm_round_rate(struct clk *clk,
- unsigned long rate)
-{
- unsigned long parent = clk_get_rate(clk->parent);
- u32 div;
-
- if (parent < rate)
- return parent;
-
- div = (parent / rate) - 1;
- if (div > armclk_mask)
- div = armclk_mask;
-
- return parent / (div + 1);
-}
-
-static int s3c64xx_clk_arm_set_rate(struct clk *clk, unsigned long rate)
-{
- unsigned long parent = clk_get_rate(clk->parent);
- u32 div;
- u32 val;
-
- if (rate < parent / (armclk_mask + 1))
- return -EINVAL;
-
- rate = clk_round_rate(clk, rate);
- div = clk_get_rate(clk->parent) / rate;
-
- val = __raw_readl(S3C_CLK_DIV0);
- val &= ~armclk_mask;
- val |= (div - 1);
- __raw_writel(val, S3C_CLK_DIV0);
-
- return 0;
-
-}
-
-static struct clk clk_arm = {
- .name = "armclk",
- .parent = &clk_mout_apll.clk,
- .ops = &(struct clk_ops) {
- .get_rate = s3c64xx_clk_arm_get_rate,
- .set_rate = s3c64xx_clk_arm_set_rate,
- .round_rate = s3c64xx_clk_arm_round_rate,
- },
-};
-
-static unsigned long s3c64xx_clk_doutmpll_get_rate(struct clk *clk)
-{
- unsigned long rate = clk_get_rate(clk->parent);
-
- printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
-
- if (__raw_readl(S3C_CLK_DIV0) & S3C6400_CLKDIV0_MPLL_MASK)
- rate /= 2;
-
- return rate;
-}
-
-static struct clk_ops clk_dout_ops = {
- .get_rate = s3c64xx_clk_doutmpll_get_rate,
-};
-
-static struct clk clk_dout_mpll = {
- .name = "dout_mpll",
- .parent = &clk_mout_mpll.clk,
- .ops = &clk_dout_ops,
-};
-
-static struct clk *clkset_spi_mmc_list[] = {
- &clk_mout_epll.clk,
- &clk_dout_mpll,
- &clk_fin_epll,
- &clk_27m,
-};
-
-static struct clksrc_sources clkset_spi_mmc = {
- .sources = clkset_spi_mmc_list,
- .nr_sources = ARRAY_SIZE(clkset_spi_mmc_list),
-};
-
-static struct clk *clkset_irda_list[] = {
- &clk_mout_epll.clk,
- &clk_dout_mpll,
- NULL,
- &clk_27m,
-};
-
-static struct clksrc_sources clkset_irda = {
- .sources = clkset_irda_list,
- .nr_sources = ARRAY_SIZE(clkset_irda_list),
-};
-
-static struct clk *clkset_uart_list[] = {
- &clk_mout_epll.clk,
- &clk_dout_mpll,
- NULL,
- NULL
-};
-
-static struct clksrc_sources clkset_uart = {
- .sources = clkset_uart_list,
- .nr_sources = ARRAY_SIZE(clkset_uart_list),
-};
-
-static struct clk *clkset_uhost_list[] = {
- &clk_48m,
- &clk_mout_epll.clk,
- &clk_dout_mpll,
- &clk_fin_epll,
-};
-
-static struct clksrc_sources clkset_uhost = {
- .sources = clkset_uhost_list,
- .nr_sources = ARRAY_SIZE(clkset_uhost_list),
-};
-
-/* The peripheral clocks are all controlled via clocksource followed
- * by an optional divider and gate stage. We currently roll this into
- * one clock which hides the intermediate clock from the mux.
- *
- * Note, the JPEG clock can only be an even divider...
- *
- * The scaler and LCD clocks depend on the S3C64XX version, and also
- * have a common parent divisor so are not included here.
- */
-
-/* clocks that feed other parts of the clock source tree */
-
-static struct clk clk_iis_cd0 = {
- .name = "iis_cdclk0",
-};
-
-static struct clk clk_iis_cd1 = {
- .name = "iis_cdclk1",
-};
-
-static struct clk clk_iisv4_cd = {
- .name = "iis_cdclk_v4",
-};
-
-static struct clk clk_pcm_cd = {
- .name = "pcm_cdclk",
-};
-
-static struct clk *clkset_audio0_list[] = {
- [0] = &clk_mout_epll.clk,
- [1] = &clk_dout_mpll,
- [2] = &clk_fin_epll,
- [3] = &clk_iis_cd0,
- [4] = &clk_pcm_cd,
-};
-
-static struct clksrc_sources clkset_audio0 = {
- .sources = clkset_audio0_list,
- .nr_sources = ARRAY_SIZE(clkset_audio0_list),
-};
-
-static struct clk *clkset_audio1_list[] = {
- [0] = &clk_mout_epll.clk,
- [1] = &clk_dout_mpll,
- [2] = &clk_fin_epll,
- [3] = &clk_iis_cd1,
- [4] = &clk_pcm_cd,
-};
-
-static struct clksrc_sources clkset_audio1 = {
- .sources = clkset_audio1_list,
- .nr_sources = ARRAY_SIZE(clkset_audio1_list),
-};
-
-#ifdef CONFIG_CPU_S3C6410
-static struct clk *clkset_audio2_list[] = {
- [0] = &clk_mout_epll.clk,
- [1] = &clk_dout_mpll,
- [2] = &clk_fin_epll,
- [3] = &clk_iisv4_cd,
- [4] = &clk_pcm_cd,
-};
-
-static struct clksrc_sources clkset_audio2 = {
- .sources = clkset_audio2_list,
- .nr_sources = ARRAY_SIZE(clkset_audio2_list),
-};
-#endif
-
-static struct clksrc_clk clksrcs[] = {
- {
- .clk = {
- .name = "usb-bus-host",
- .ctrlbit = S3C_CLKCON_SCLK_UHOST,
- .enable = s3c64xx_sclk_ctrl,
- },
- .reg_src = { .reg = S3C_CLK_SRC, .shift = 5, .size = 2 },
- .reg_div = { .reg = S3C_CLK_DIV1, .shift = 20, .size = 4 },
- .sources = &clkset_uhost,
- }, {
- .clk = {
- .name = "irda-bus",
- .ctrlbit = S3C_CLKCON_SCLK_IRDA,
- .enable = s3c64xx_sclk_ctrl,
- },
- .reg_src = { .reg = S3C_CLK_SRC, .shift = 24, .size = 2 },
- .reg_div = { .reg = S3C_CLK_DIV2, .shift = 20, .size = 4 },
- .sources = &clkset_irda,
- }, {
- .clk = {
- .name = "camera",
- .ctrlbit = S3C_CLKCON_SCLK_CAM,
- .enable = s3c64xx_sclk_ctrl,
- .parent = &clk_h2,
- },
- .reg_div = { .reg = S3C_CLK_DIV0, .shift = 20, .size = 4 },
- },
-};
-
-/* Where does UCLK0 come from? */
-static struct clksrc_clk clk_sclk_uclk = {
- .clk = {
- .name = "uclk1",
- .ctrlbit = S3C_CLKCON_SCLK_UART,
- .enable = s3c64xx_sclk_ctrl,
- },
- .reg_src = { .reg = S3C_CLK_SRC, .shift = 13, .size = 1 },
- .reg_div = { .reg = S3C_CLK_DIV2, .shift = 16, .size = 4 },
- .sources = &clkset_uart,
-};
-
-static struct clksrc_clk clk_sclk_mmc0 = {
- .clk = {
- .name = "mmc_bus",
- .devname = "s3c-sdhci.0",
- .ctrlbit = S3C_CLKCON_SCLK_MMC0,
- .enable = s3c64xx_sclk_ctrl,
- },
- .reg_src = { .reg = S3C_CLK_SRC, .shift = 18, .size = 2 },
- .reg_div = { .reg = S3C_CLK_DIV1, .shift = 0, .size = 4 },
- .sources = &clkset_spi_mmc,
-};
-
-static struct clksrc_clk clk_sclk_mmc1 = {
- .clk = {
- .name = "mmc_bus",
- .devname = "s3c-sdhci.1",
- .ctrlbit = S3C_CLKCON_SCLK_MMC1,
- .enable = s3c64xx_sclk_ctrl,
- },
- .reg_src = { .reg = S3C_CLK_SRC, .shift = 20, .size = 2 },
- .reg_div = { .reg = S3C_CLK_DIV1, .shift = 4, .size = 4 },
- .sources = &clkset_spi_mmc,
-};
-
-static struct clksrc_clk clk_sclk_mmc2 = {
- .clk = {
- .name = "mmc_bus",
- .devname = "s3c-sdhci.2",
- .ctrlbit = S3C_CLKCON_SCLK_MMC2,
- .enable = s3c64xx_sclk_ctrl,
- },
- .reg_src = { .reg = S3C_CLK_SRC, .shift = 22, .size = 2 },
- .reg_div = { .reg = S3C_CLK_DIV1, .shift = 8, .size = 4 },
- .sources = &clkset_spi_mmc,
-};
-
-static struct clksrc_clk clk_sclk_spi0 = {
- .clk = {
- .name = "spi-bus",
- .devname = "s3c6410-spi.0",
- .ctrlbit = S3C_CLKCON_SCLK_SPI0,
- .enable = s3c64xx_sclk_ctrl,
- },
- .reg_src = { .reg = S3C_CLK_SRC, .shift = 14, .size = 2 },
- .reg_div = { .reg = S3C_CLK_DIV2, .shift = 0, .size = 4 },
- .sources = &clkset_spi_mmc,
-};
-
-static struct clksrc_clk clk_sclk_spi1 = {
- .clk = {
- .name = "spi-bus",
- .devname = "s3c6410-spi.1",
- .ctrlbit = S3C_CLKCON_SCLK_SPI1,
- .enable = s3c64xx_sclk_ctrl,
- },
- .reg_src = { .reg = S3C_CLK_SRC, .shift = 16, .size = 2 },
- .reg_div = { .reg = S3C_CLK_DIV2, .shift = 4, .size = 4 },
- .sources = &clkset_spi_mmc,
-};
-
-static struct clksrc_clk clk_audio_bus0 = {
- .clk = {
- .name = "audio-bus",
- .devname = "samsung-i2s.0",
- .ctrlbit = S3C_CLKCON_SCLK_AUDIO0,
- .enable = s3c64xx_sclk_ctrl,
- },
- .reg_src = { .reg = S3C_CLK_SRC, .shift = 7, .size = 3 },
- .reg_div = { .reg = S3C_CLK_DIV2, .shift = 8, .size = 4 },
- .sources = &clkset_audio0,
-};
-
-static struct clksrc_clk clk_audio_bus1 = {
- .clk = {
- .name = "audio-bus",
- .devname = "samsung-i2s.1",
- .ctrlbit = S3C_CLKCON_SCLK_AUDIO1,
- .enable = s3c64xx_sclk_ctrl,
- },
- .reg_src = { .reg = S3C_CLK_SRC, .shift = 10, .size = 3 },
- .reg_div = { .reg = S3C_CLK_DIV2, .shift = 12, .size = 4 },
- .sources = &clkset_audio1,
-};
-
-#ifdef CONFIG_CPU_S3C6410
-static struct clksrc_clk clk_audio_bus2 = {
- .clk = {
- .name = "audio-bus",
- .devname = "samsung-i2s.2",
- .ctrlbit = S3C6410_CLKCON_SCLK_AUDIO2,
- .enable = s3c64xx_sclk_ctrl,
- },
- .reg_src = { .reg = S3C6410_CLK_SRC2, .shift = 0, .size = 3 },
- .reg_div = { .reg = S3C_CLK_DIV2, .shift = 24, .size = 4 },
- .sources = &clkset_audio2,
-};
-#endif
-/* Clock initialisation code */
-
-static struct clksrc_clk *init_parents[] = {
- &clk_mout_apll,
- &clk_mout_epll,
- &clk_mout_mpll,
-};
-
-static struct clksrc_clk *clksrc_cdev[] = {
- &clk_sclk_uclk,
- &clk_sclk_mmc0,
- &clk_sclk_mmc1,
- &clk_sclk_mmc2,
- &clk_sclk_spi0,
- &clk_sclk_spi1,
- &clk_audio_bus0,
- &clk_audio_bus1,
-};
-
-static struct clk *clk_cdev[] = {
- &clk_hsmmc0,
- &clk_hsmmc1,
- &clk_hsmmc2,
- &clk_48m_spi0,
- &clk_48m_spi1,
- &clk_i2s0,
- &clk_i2s1,
-};
-
-static struct clk_lookup s3c64xx_clk_lookup[] = {
- CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p),
- CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_sclk_uclk.clk),
- CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.0", &clk_hsmmc0),
- CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.0", &clk_hsmmc1),
- CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.0", &clk_hsmmc2),
- CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &clk_sclk_mmc0.clk),
- CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_sclk_mmc1.clk),
- CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk),
- CLKDEV_INIT(NULL, "spi_busclk0", &clk_p),
- CLKDEV_INIT("s3c6410-spi.0", "spi_busclk1", &clk_sclk_spi0.clk),
- CLKDEV_INIT("s3c6410-spi.0", "spi_busclk2", &clk_48m_spi0),
- CLKDEV_INIT("s3c6410-spi.1", "spi_busclk1", &clk_sclk_spi1.clk),
- CLKDEV_INIT("s3c6410-spi.1", "spi_busclk2", &clk_48m_spi1),
- CLKDEV_INIT("samsung-i2s.0", "i2s_opclk0", &clk_i2s0),
- CLKDEV_INIT("samsung-i2s.0", "i2s_opclk1", &clk_audio_bus0.clk),
- CLKDEV_INIT("samsung-i2s.1", "i2s_opclk0", &clk_i2s1),
- CLKDEV_INIT("samsung-i2s.1", "i2s_opclk1", &clk_audio_bus1.clk),
-#ifdef CONFIG_CPU_S3C6410
- CLKDEV_INIT("samsung-i2s.2", "i2s_opclk0", &clk_i2s2),
- CLKDEV_INIT("samsung-i2s.2", "i2s_opclk1", &clk_audio_bus2.clk),
-#endif
-};
-
-#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1)
-
-void __init_or_cpufreq s3c64xx_setup_clocks(void)
-{
- struct clk *xtal_clk;
- unsigned long xtal;
- unsigned long fclk;
- unsigned long hclk;
- unsigned long hclk2;
- unsigned long pclk;
- unsigned long epll;
- unsigned long apll;
- unsigned long mpll;
- unsigned int ptr;
- u32 clkdiv0;
-
- printk(KERN_DEBUG "%s: registering clocks\n", __func__);
-
- clkdiv0 = __raw_readl(S3C_CLK_DIV0);
- printk(KERN_DEBUG "%s: clkdiv0 = %08x\n", __func__, clkdiv0);
-
- xtal_clk = clk_get(NULL, "xtal");
- BUG_ON(IS_ERR(xtal_clk));
-
- xtal = clk_get_rate(xtal_clk);
- clk_put(xtal_clk);
-
- printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
-
- /* For now assume the mux always selects the crystal */
- clk_ext_xtal_mux.parent = xtal_clk;
-
- epll = s3c_get_pll6553x(xtal, __raw_readl(S3C_EPLL_CON0),
- __raw_readl(S3C_EPLL_CON1));
- mpll = s3c6400_get_pll(xtal, __raw_readl(S3C_MPLL_CON));
- apll = s3c6400_get_pll(xtal, __raw_readl(S3C_APLL_CON));
-
- fclk = mpll;
-
- printk(KERN_INFO "S3C64XX: PLL settings, A=%ld, M=%ld, E=%ld\n",
- apll, mpll, epll);
-
- if(__raw_readl(S3C64XX_OTHERS) & S3C64XX_OTHERS_SYNCMUXSEL)
- /* Synchronous mode */
- hclk2 = apll / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK2);
- else
- /* Asynchronous mode */
- hclk2 = mpll / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK2);
-
- hclk = hclk2 / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK);
- pclk = hclk2 / GET_DIV(clkdiv0, S3C6400_CLKDIV0_PCLK);
-
- printk(KERN_INFO "S3C64XX: HCLK2=%ld, HCLK=%ld, PCLK=%ld\n",
- hclk2, hclk, pclk);
-
- clk_fout_mpll.rate = mpll;
- clk_fout_epll.rate = epll;
- clk_fout_apll.rate = apll;
-
- clk_h2.rate = hclk2;
- clk_h.rate = hclk;
- clk_p.rate = pclk;
- clk_f.rate = fclk;
-
- for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++)
- s3c_set_clksrc(init_parents[ptr], true);
-
- for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
- s3c_set_clksrc(&clksrcs[ptr], true);
-}
-
-static struct clk *clks1[] __initdata = {
- &clk_ext_xtal_mux,
- &clk_iis_cd0,
- &clk_iis_cd1,
- &clk_iisv4_cd,
- &clk_pcm_cd,
- &clk_mout_epll.clk,
- &clk_mout_mpll.clk,
- &clk_dout_mpll,
- &clk_arm,
-};
-
-static struct clk *clks[] __initdata = {
- &clk_ext,
- &clk_epll,
- &clk_27m,
- &clk_48m,
- &clk_h2,
- &clk_xusbxti,
-};
-
-/**
- * s3c64xx_register_clocks - register clocks for s3c6400 and s3c6410
- * @xtal: The rate for the clock crystal feeding the PLLs.
- * @armclk_divlimit: Divisor mask for ARMCLK.
- *
- * Register the clocks for the S3C6400 and S3C6410 SoC range, such
- * as ARMCLK as well as the necessary parent clocks.
- *
- * This call does not setup the clocks, which is left to the
- * s3c64xx_setup_clocks() call which may be needed by the cpufreq
- * or resume code to re-set the clocks if the bootloader has changed
- * them.
- */
-void __init s3c64xx_register_clocks(unsigned long xtal,
- unsigned armclk_divlimit)
-{
- unsigned int cnt;
-
- armclk_mask = armclk_divlimit;
-
- s3c24xx_register_baseclocks(xtal);
- s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
-
- s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
-
- s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
- s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-
- s3c24xx_register_clocks(clk_cdev, ARRAY_SIZE(clk_cdev));
- for (cnt = 0; cnt < ARRAY_SIZE(clk_cdev); cnt++)
- s3c_disable_clocks(clk_cdev[cnt], 1);
-
- s3c24xx_register_clocks(clks1, ARRAY_SIZE(clks1));
- s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
- for (cnt = 0; cnt < ARRAY_SIZE(clksrc_cdev); cnt++)
- s3c_register_clksrc(clksrc_cdev[cnt], 1);
- clkdev_add_table(s3c64xx_clk_lookup, ARRAY_SIZE(s3c64xx_clk_lookup));
-}
diff --git a/arch/arm/mach-s3c64xx/common.c b/arch/arm/mach-s3c64xx/common.c
index 73d79cf..7a3ce4c 100644
--- a/arch/arm/mach-s3c64xx/common.c
+++ b/arch/arm/mach-s3c64xx/common.c
@@ -14,9 +14,14 @@
* published by the Free Software Foundation.
*/
+/*
+ * NOTE: Code in this file is not used when booting with Device Tree support.
+ */
+
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/module.h>
+#include <linux/clk-provider.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/serial_core.h>
@@ -38,7 +43,6 @@
#include <mach/regs-gpio.h>
#include <plat/cpu.h>
-#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/pm.h>
#include <plat/gpio-cfg.h>
@@ -50,6 +54,19 @@
#include "common.h"
+/* External clock frequency */
+static unsigned long xtal_f = 12000000, xusbxti_f = 48000000;
+
+void __init s3c64xx_set_xtal_freq(unsigned long freq)
+{
+ xtal_f = freq;
+}
+
+void __init s3c64xx_set_xusbxti_freq(unsigned long freq)
+{
+ xusbxti_f = freq;
+}
+
/* uart registration process */
static void __init s3c64xx_init_uarts(struct s3c2410_uartcfg *cfg, int no)
@@ -67,7 +84,6 @@
.idcode = S3C6400_CPU_ID,
.idmask = S3C64XX_CPU_MASK,
.map_io = s3c6400_map_io,
- .init_clocks = s3c6400_init_clocks,
.init_uarts = s3c64xx_init_uarts,
.init = s3c6400_init,
.name = name_s3c6400,
@@ -75,7 +91,6 @@
.idcode = S3C6410_CPU_ID,
.idmask = S3C64XX_CPU_MASK,
.map_io = s3c6410_map_io,
- .init_clocks = s3c6410_init_clocks,
.init_uarts = s3c64xx_init_uarts,
.init = s3c6410_init,
.name = name_s3c6410,
@@ -192,6 +207,10 @@
static __init int s3c64xx_dev_init(void)
{
+ /* Not applicable when using DT. */
+ if (of_have_populated_dt())
+ return 0;
+
subsys_system_register(&s3c64xx_subsys, NULL);
return device_register(&s3c64xx_dev);
}
@@ -213,8 +232,10 @@
{
/*
* FIXME: there is no better place to put this at the moment
- * (samsung_wdt_reset_init needs clocks)
+ * (s3c64xx_clk_init needs ioremap and must happen before init_time
+ * samsung_wdt_reset_init needs clocks)
*/
+ s3c64xx_clk_init(NULL, xtal_f, xusbxti_f, soc_is_s3c6400(), S3C_VA_SYS);
samsung_wdt_reset_init(S3C_VA_WATCHDOG);
printk(KERN_DEBUG "%s: initialising interrupts\n", __func__);
@@ -391,6 +412,10 @@
{
int irq;
+ /* On DT-enabled systems EINTs are handled by pinctrl-s3c64xx driver. */
+ if (of_have_populated_dt())
+ return -ENODEV;
+
for (irq = IRQ_EINT(0); irq <= IRQ_EINT(27); irq++) {
irq_set_chip_and_handler(irq, &s3c_irq_eint, handle_level_irq);
irq_set_chip_data(irq, (void *)eint_irq_to_bit(irq));
diff --git a/arch/arm/mach-s3c64xx/common.h b/arch/arm/mach-s3c64xx/common.h
index e8f990b..bd3bd56 100644
--- a/arch/arm/mach-s3c64xx/common.h
+++ b/arch/arm/mach-s3c64xx/common.h
@@ -22,21 +22,21 @@
void s3c64xx_init_irq(u32 vic0, u32 vic1);
void s3c64xx_init_io(struct map_desc *mach_desc, int size);
-void s3c64xx_register_clocks(unsigned long xtal, unsigned armclk_limit);
-void s3c64xx_setup_clocks(void);
-
void s3c64xx_restart(enum reboot_mode mode, const char *cmd);
void s3c64xx_init_late(void);
+void s3c64xx_clk_init(struct device_node *np, unsigned long xtal_f,
+ unsigned long xusbxti_f, bool is_s3c6400, void __iomem *reg_base);
+void s3c64xx_set_xtal_freq(unsigned long freq);
+void s3c64xx_set_xusbxti_freq(unsigned long freq);
+
#ifdef CONFIG_CPU_S3C6400
extern int s3c6400_init(void);
extern void s3c6400_init_irq(void);
extern void s3c6400_map_io(void);
-extern void s3c6400_init_clocks(int xtal);
#else
-#define s3c6400_init_clocks NULL
#define s3c6400_map_io NULL
#define s3c6400_init NULL
#endif
@@ -46,10 +46,8 @@
extern int s3c6410_init(void);
extern void s3c6410_init_irq(void);
extern void s3c6410_map_io(void);
-extern void s3c6410_init_clocks(int xtal);
#else
-#define s3c6410_init_clocks NULL
#define s3c6410_map_io NULL
#define s3c6410_init NULL
#endif
diff --git a/arch/arm/mach-s3c64xx/dma.c b/arch/arm/mach-s3c64xx/dma.c
index 759846c..7e22c21 100644
--- a/arch/arm/mach-s3c64xx/dma.c
+++ b/arch/arm/mach-s3c64xx/dma.c
@@ -12,6 +12,10 @@
* published by the Free Software Foundation.
*/
+/*
+ * NOTE: Code in this file is not used when booting with Device Tree support.
+ */
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/interrupt.h>
@@ -24,6 +28,7 @@
#include <linux/err.h>
#include <linux/io.h>
#include <linux/amba/pl080.h>
+#include <linux/of.h>
#include <mach/dma.h>
#include <mach/map.h>
@@ -677,7 +682,7 @@
goto err_map;
}
- clk_enable(dmac->clk);
+ clk_prepare_enable(dmac->clk);
dmac->regs = regs;
dmac->chanbase = chbase;
@@ -711,7 +716,7 @@
return 0;
err_clk:
- clk_disable(dmac->clk);
+ clk_disable_unprepare(dmac->clk);
clk_put(dmac->clk);
err_map:
iounmap(regs);
@@ -726,6 +731,10 @@
{
int ret;
+ /* This driver is not supported when booting with device tree. */
+ if (of_have_populated_dt())
+ return -ENODEV;
+
printk(KERN_INFO "%s: Registering DMA channels\n", __func__);
dma_pool = dma_pool_create("DMA-LLI", NULL, sizeof(struct pl080s_lli), 16, 0);
diff --git a/arch/arm/mach-s3c64xx/include/mach/regs-clock.h b/arch/arm/mach-s3c64xx/include/mach/regs-clock.h
index 05332b9..4f44aac 100644
--- a/arch/arm/mach-s3c64xx/include/mach/regs-clock.h
+++ b/arch/arm/mach-s3c64xx/include/mach/regs-clock.h
@@ -15,145 +15,21 @@
#ifndef __PLAT_REGS_CLOCK_H
#define __PLAT_REGS_CLOCK_H __FILE__
+/*
+ * FIXME: Remove remaining definitions
+ */
+
#define S3C_CLKREG(x) (S3C_VA_SYS + (x))
-#define S3C_APLL_LOCK S3C_CLKREG(0x00)
-#define S3C_MPLL_LOCK S3C_CLKREG(0x04)
-#define S3C_EPLL_LOCK S3C_CLKREG(0x08)
-#define S3C_APLL_CON S3C_CLKREG(0x0C)
-#define S3C_MPLL_CON S3C_CLKREG(0x10)
-#define S3C_EPLL_CON0 S3C_CLKREG(0x14)
-#define S3C_EPLL_CON1 S3C_CLKREG(0x18)
-#define S3C_CLK_SRC S3C_CLKREG(0x1C)
-#define S3C_CLK_DIV0 S3C_CLKREG(0x20)
-#define S3C_CLK_DIV1 S3C_CLKREG(0x24)
-#define S3C_CLK_DIV2 S3C_CLKREG(0x28)
-#define S3C_CLK_OUT S3C_CLKREG(0x2C)
-#define S3C_HCLK_GATE S3C_CLKREG(0x30)
#define S3C_PCLK_GATE S3C_CLKREG(0x34)
-#define S3C_SCLK_GATE S3C_CLKREG(0x38)
-#define S3C_MEM0_GATE S3C_CLKREG(0x3C)
#define S3C6410_CLK_SRC2 S3C_CLKREG(0x10C)
#define S3C_MEM_SYS_CFG S3C_CLKREG(0x120)
-/* CLKDIV0 */
-#define S3C6400_CLKDIV0_PCLK_MASK (0xf << 12)
-#define S3C6400_CLKDIV0_PCLK_SHIFT (12)
-#define S3C6400_CLKDIV0_HCLK2_MASK (0x7 << 9)
-#define S3C6400_CLKDIV0_HCLK2_SHIFT (9)
-#define S3C6400_CLKDIV0_HCLK_MASK (0x1 << 8)
-#define S3C6400_CLKDIV0_HCLK_SHIFT (8)
-#define S3C6400_CLKDIV0_MPLL_MASK (0x1 << 4)
-#define S3C6400_CLKDIV0_MPLL_SHIFT (4)
-
-#define S3C6400_CLKDIV0_ARM_MASK (0x7 << 0)
-#define S3C6410_CLKDIV0_ARM_MASK (0xf << 0)
-#define S3C6400_CLKDIV0_ARM_SHIFT (0)
-
-/* HCLK GATE Registers */
-#define S3C_CLKCON_HCLK_3DSE (1<<31)
-#define S3C_CLKCON_HCLK_UHOST (1<<29)
-#define S3C_CLKCON_HCLK_SECUR (1<<28)
-#define S3C_CLKCON_HCLK_SDMA1 (1<<27)
-#define S3C_CLKCON_HCLK_SDMA0 (1<<26)
-#define S3C_CLKCON_HCLK_IROM (1<<25)
-#define S3C_CLKCON_HCLK_DDR1 (1<<24)
-#define S3C_CLKCON_HCLK_DDR0 (1<<23)
-#define S3C_CLKCON_HCLK_MEM1 (1<<22)
-#define S3C_CLKCON_HCLK_MEM0 (1<<21)
-#define S3C_CLKCON_HCLK_USB (1<<20)
-#define S3C_CLKCON_HCLK_HSMMC2 (1<<19)
-#define S3C_CLKCON_HCLK_HSMMC1 (1<<18)
-#define S3C_CLKCON_HCLK_HSMMC0 (1<<17)
-#define S3C_CLKCON_HCLK_MDP (1<<16)
-#define S3C_CLKCON_HCLK_DHOST (1<<15)
-#define S3C_CLKCON_HCLK_IHOST (1<<14)
-#define S3C_CLKCON_HCLK_DMA1 (1<<13)
-#define S3C_CLKCON_HCLK_DMA0 (1<<12)
-#define S3C_CLKCON_HCLK_JPEG (1<<11)
-#define S3C_CLKCON_HCLK_CAMIF (1<<10)
-#define S3C_CLKCON_HCLK_SCALER (1<<9)
-#define S3C_CLKCON_HCLK_2D (1<<8)
-#define S3C_CLKCON_HCLK_TV (1<<7)
-#define S3C_CLKCON_HCLK_POST0 (1<<5)
-#define S3C_CLKCON_HCLK_ROT (1<<4)
-#define S3C_CLKCON_HCLK_LCD (1<<3)
-#define S3C_CLKCON_HCLK_TZIC (1<<2)
-#define S3C_CLKCON_HCLK_INTC (1<<1)
-#define S3C_CLKCON_HCLK_MFC (1<<0)
-
/* PCLK GATE Registers */
-#define S3C6410_CLKCON_PCLK_I2C1 (1<<27)
-#define S3C6410_CLKCON_PCLK_IIS2 (1<<26)
-#define S3C_CLKCON_PCLK_SKEY (1<<24)
-#define S3C_CLKCON_PCLK_CHIPID (1<<23)
-#define S3C_CLKCON_PCLK_SPI1 (1<<22)
-#define S3C_CLKCON_PCLK_SPI0 (1<<21)
-#define S3C_CLKCON_PCLK_HSIRX (1<<20)
-#define S3C_CLKCON_PCLK_HSITX (1<<19)
-#define S3C_CLKCON_PCLK_GPIO (1<<18)
-#define S3C_CLKCON_PCLK_IIC (1<<17)
-#define S3C_CLKCON_PCLK_IIS1 (1<<16)
-#define S3C_CLKCON_PCLK_IIS0 (1<<15)
-#define S3C_CLKCON_PCLK_AC97 (1<<14)
-#define S3C_CLKCON_PCLK_TZPC (1<<13)
-#define S3C_CLKCON_PCLK_TSADC (1<<12)
-#define S3C_CLKCON_PCLK_KEYPAD (1<<11)
-#define S3C_CLKCON_PCLK_IRDA (1<<10)
-#define S3C_CLKCON_PCLK_PCM1 (1<<9)
-#define S3C_CLKCON_PCLK_PCM0 (1<<8)
-#define S3C_CLKCON_PCLK_PWM (1<<7)
-#define S3C_CLKCON_PCLK_RTC (1<<6)
-#define S3C_CLKCON_PCLK_WDT (1<<5)
#define S3C_CLKCON_PCLK_UART3 (1<<4)
#define S3C_CLKCON_PCLK_UART2 (1<<3)
#define S3C_CLKCON_PCLK_UART1 (1<<2)
#define S3C_CLKCON_PCLK_UART0 (1<<1)
-#define S3C_CLKCON_PCLK_MFC (1<<0)
-
-/* SCLK GATE Registers */
-#define S3C_CLKCON_SCLK_UHOST (1<<30)
-#define S3C_CLKCON_SCLK_MMC2_48 (1<<29)
-#define S3C_CLKCON_SCLK_MMC1_48 (1<<28)
-#define S3C_CLKCON_SCLK_MMC0_48 (1<<27)
-#define S3C_CLKCON_SCLK_MMC2 (1<<26)
-#define S3C_CLKCON_SCLK_MMC1 (1<<25)
-#define S3C_CLKCON_SCLK_MMC0 (1<<24)
-#define S3C_CLKCON_SCLK_SPI1_48 (1<<23)
-#define S3C_CLKCON_SCLK_SPI0_48 (1<<22)
-#define S3C_CLKCON_SCLK_SPI1 (1<<21)
-#define S3C_CLKCON_SCLK_SPI0 (1<<20)
-#define S3C_CLKCON_SCLK_DAC27 (1<<19)
-#define S3C_CLKCON_SCLK_TV27 (1<<18)
-#define S3C_CLKCON_SCLK_SCALER27 (1<<17)
-#define S3C_CLKCON_SCLK_SCALER (1<<16)
-#define S3C_CLKCON_SCLK_LCD27 (1<<15)
-#define S3C_CLKCON_SCLK_LCD (1<<14)
-#define S3C6400_CLKCON_SCLK_POST1_27 (1<<13)
-#define S3C6410_CLKCON_FIMC (1<<13)
-#define S3C_CLKCON_SCLK_POST0_27 (1<<12)
-#define S3C6400_CLKCON_SCLK_POST1 (1<<11)
-#define S3C6410_CLKCON_SCLK_AUDIO2 (1<<11)
-#define S3C_CLKCON_SCLK_POST0 (1<<10)
-#define S3C_CLKCON_SCLK_AUDIO1 (1<<9)
-#define S3C_CLKCON_SCLK_AUDIO0 (1<<8)
-#define S3C_CLKCON_SCLK_SECUR (1<<7)
-#define S3C_CLKCON_SCLK_IRDA (1<<6)
-#define S3C_CLKCON_SCLK_UART (1<<5)
-#define S3C_CLKCON_SCLK_ONENAND (1<<4)
-#define S3C_CLKCON_SCLK_MFC (1<<3)
-#define S3C_CLKCON_SCLK_CAM (1<<2)
-#define S3C_CLKCON_SCLK_JPEG (1<<1)
-
-/* CLKSRC */
-
-#define S3C6400_CLKSRC_APLL_MOUT (1 << 0)
-#define S3C6400_CLKSRC_MPLL_MOUT (1 << 1)
-#define S3C6400_CLKSRC_EPLL_MOUT (1 << 2)
-#define S3C6400_CLKSRC_APLL_MOUT_SHIFT (0)
-#define S3C6400_CLKSRC_MPLL_MOUT_SHIFT (1)
-#define S3C6400_CLKSRC_EPLL_MOUT_SHIFT (2)
-#define S3C6400_CLKSRC_MFC (1 << 4)
/* MEM_SYS_CFG */
#define MEM_SYS_CFG_INDEP_CF 0x4000
diff --git a/arch/arm/mach-s3c64xx/irq-pm.c b/arch/arm/mach-s3c64xx/irq-pm.c
index c3da1b6..1649c0d 100644
--- a/arch/arm/mach-s3c64xx/irq-pm.c
+++ b/arch/arm/mach-s3c64xx/irq-pm.c
@@ -12,12 +12,17 @@
* published by the Free Software Foundation.
*/
+/*
+ * NOTE: Code in this file is not used when booting with Device Tree support.
+ */
+
#include <linux/kernel.h>
#include <linux/syscore_ops.h>
#include <linux/interrupt.h>
#include <linux/serial_core.h>
#include <linux/irq.h>
#include <linux/io.h>
+#include <linux/of.h>
#include <mach/map.h>
@@ -101,6 +106,10 @@
static __init int s3c64xx_syscore_init(void)
{
+ /* Appropriate drivers (pinctrl, uart) handle this when using DT. */
+ if (of_have_populated_dt())
+ return 0;
+
register_syscore_ops(&s3c64xx_irq_syscore_ops);
return 0;
diff --git a/arch/arm/mach-s3c64xx/mach-anw6410.c b/arch/arm/mach-s3c64xx/mach-anw6410.c
index 35e3f54..d266dd5 100644
--- a/arch/arm/mach-s3c64xx/mach-anw6410.c
+++ b/arch/arm/mach-s3c64xx/mach-anw6410.c
@@ -207,7 +207,7 @@
static void __init anw6410_map_io(void)
{
s3c64xx_init_io(anw6410_iodesc, ARRAY_SIZE(anw6410_iodesc));
- s3c24xx_init_clocks(12000000);
+ s3c64xx_set_xtal_freq(12000000);
s3c24xx_init_uarts(anw6410_uartcfgs, ARRAY_SIZE(anw6410_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index eb8e5a1..1a911df 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -743,7 +743,7 @@
static void __init crag6410_map_io(void)
{
s3c64xx_init_io(NULL, 0);
- s3c24xx_init_clocks(12000000);
+ s3c64xx_set_xtal_freq(12000000);
s3c24xx_init_uarts(crag6410_uartcfgs, ARRAY_SIZE(crag6410_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
diff --git a/arch/arm/mach-s3c64xx/mach-hmt.c b/arch/arm/mach-s3c64xx/mach-hmt.c
index f39569e..e806404 100644
--- a/arch/arm/mach-s3c64xx/mach-hmt.c
+++ b/arch/arm/mach-s3c64xx/mach-hmt.c
@@ -247,7 +247,7 @@
static void __init hmt_map_io(void)
{
s3c64xx_init_io(hmt_iodesc, ARRAY_SIZE(hmt_iodesc));
- s3c24xx_init_clocks(12000000);
+ s3c64xx_set_xtal_freq(12000000);
s3c24xx_init_uarts(hmt_uartcfgs, ARRAY_SIZE(hmt_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c
index fc043e3..58d46a3 100644
--- a/arch/arm/mach-s3c64xx/mach-mini6410.c
+++ b/arch/arm/mach-s3c64xx/mach-mini6410.c
@@ -231,7 +231,7 @@
u32 tmp;
s3c64xx_init_io(NULL, 0);
- s3c24xx_init_clocks(12000000);
+ s3c64xx_set_xtal_freq(12000000);
s3c24xx_init_uarts(mini6410_uartcfgs, ARRAY_SIZE(mini6410_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
diff --git a/arch/arm/mach-s3c64xx/mach-ncp.c b/arch/arm/mach-s3c64xx/mach-ncp.c
index 7e2c390..2067b0b 100644
--- a/arch/arm/mach-s3c64xx/mach-ncp.c
+++ b/arch/arm/mach-s3c64xx/mach-ncp.c
@@ -86,7 +86,7 @@
static void __init ncp_map_io(void)
{
s3c64xx_init_io(ncp_iodesc, ARRAY_SIZE(ncp_iodesc));
- s3c24xx_init_clocks(12000000);
+ s3c64xx_set_xtal_freq(12000000);
s3c24xx_init_uarts(ncp_uartcfgs, ARRAY_SIZE(ncp_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
diff --git a/arch/arm/mach-s3c64xx/mach-s3c64xx-dt.c b/arch/arm/mach-s3c64xx/mach-s3c64xx-dt.c
new file mode 100644
index 0000000..7eb9a10
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/mach-s3c64xx-dt.c
@@ -0,0 +1,85 @@
+/*
+ * Samsung's S3C64XX flattened device tree enabled machine
+ *
+ * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/clk-provider.h>
+#include <linux/irqchip.h>
+#include <linux/of_platform.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/system_misc.h>
+
+#include <plat/cpu.h>
+#include <plat/watchdog-reset.h>
+
+#include <mach/map.h>
+
+#include "common.h"
+
+/*
+ * IO mapping for shared system controller IP.
+ *
+ * FIXME: Make remaining drivers use dynamic mapping.
+ */
+static struct map_desc s3c64xx_dt_iodesc[] __initdata = {
+ {
+ .virtual = (unsigned long)S3C_VA_SYS,
+ .pfn = __phys_to_pfn(S3C64XX_PA_SYSCON),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ },
+};
+
+static void __init s3c64xx_dt_map_io(void)
+{
+ debug_ll_io_init();
+ iotable_init(s3c64xx_dt_iodesc, ARRAY_SIZE(s3c64xx_dt_iodesc));
+
+ s3c64xx_init_cpu();
+
+ if (!soc_is_s3c64xx())
+ panic("SoC is not S3C64xx!");
+}
+
+static void __init s3c64xx_dt_init_irq(void)
+{
+ of_clk_init(NULL);
+ samsung_wdt_reset_of_init();
+ irqchip_init();
+};
+
+static void __init s3c64xx_dt_init_machine(void)
+{
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+}
+
+static void s3c64xx_dt_restart(enum reboot_mode mode, const char *cmd)
+{
+ if (mode != REBOOT_SOFT)
+ samsung_wdt_reset();
+
+ /* if all else fails, or mode was for soft, jump to 0 */
+ soft_restart(0);
+}
+
+static char const *s3c64xx_dt_compat[] __initdata = {
+ "samsung,s3c6400",
+ "samsung,s3c6410",
+ NULL
+};
+
+DT_MACHINE_START(S3C6400_DT, "Samsung S3C64xx (Flattened Device Tree)")
+ /* Maintainer: Tomasz Figa <tomasz.figa@gmail.com> */
+ .dt_compat = s3c64xx_dt_compat,
+ .map_io = s3c64xx_dt_map_io,
+ .init_irq = s3c64xx_dt_init_irq,
+ .init_machine = s3c64xx_dt_init_machine,
+ .restart = s3c64xx_dt_restart,
+MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c64xx/mach-smartq.c
index 86d980b..0f47237 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq.c
@@ -337,13 +337,6 @@
return ret;
}
-static int __init smartq_usb_otg_init(void)
-{
- clk_xusbxti.rate = 12000000;
-
- return 0;
-}
-
static int __init smartq_wifi_init(void)
{
int ret;
@@ -377,7 +370,8 @@
void __init smartq_map_io(void)
{
s3c64xx_init_io(smartq_iodesc, ARRAY_SIZE(smartq_iodesc));
- s3c24xx_init_clocks(12000000);
+ s3c64xx_set_xtal_freq(12000000);
+ s3c64xx_set_xusbxti_freq(12000000);
s3c24xx_init_uarts(smartq_uartcfgs, ARRAY_SIZE(smartq_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
@@ -399,7 +393,6 @@
WARN_ON(smartq_lcd_setup_gpio());
WARN_ON(smartq_power_off_init());
WARN_ON(smartq_usb_host_init());
- WARN_ON(smartq_usb_otg_init());
WARN_ON(smartq_wifi_init());
platform_add_devices(smartq_devices, ARRAY_SIZE(smartq_devices));
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6400.c b/arch/arm/mach-s3c64xx/mach-smdk6400.c
index d70c084..27381cf 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6400.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6400.c
@@ -65,7 +65,7 @@
static void __init smdk6400_map_io(void)
{
s3c64xx_init_io(smdk6400_iodesc, ARRAY_SIZE(smdk6400_iodesc));
- s3c24xx_init_clocks(12000000);
+ s3c64xx_set_xtal_freq(12000000);
s3c24xx_init_uarts(smdk6400_uartcfgs, ARRAY_SIZE(smdk6400_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
index d90b450..2a7b32c 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@ -634,7 +634,7 @@
u32 tmp;
s3c64xx_init_io(smdk6410_iodesc, ARRAY_SIZE(smdk6410_iodesc));
- s3c24xx_init_clocks(12000000);
+ s3c64xx_set_xtal_freq(12000000);
s3c24xx_init_uarts(smdk6410_uartcfgs, ARRAY_SIZE(smdk6410_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
diff --git a/arch/arm/mach-s3c64xx/pm.c b/arch/arm/mach-s3c64xx/pm.c
index 6a1f91f..8cdb824 100644
--- a/arch/arm/mach-s3c64xx/pm.c
+++ b/arch/arm/mach-s3c64xx/pm.c
@@ -194,29 +194,8 @@
#endif
static struct sleep_save core_save[] = {
- SAVE_ITEM(S3C_APLL_LOCK),
- SAVE_ITEM(S3C_MPLL_LOCK),
- SAVE_ITEM(S3C_EPLL_LOCK),
- SAVE_ITEM(S3C_CLK_SRC),
- SAVE_ITEM(S3C_CLK_DIV0),
- SAVE_ITEM(S3C_CLK_DIV1),
- SAVE_ITEM(S3C_CLK_DIV2),
- SAVE_ITEM(S3C_CLK_OUT),
- SAVE_ITEM(S3C_HCLK_GATE),
- SAVE_ITEM(S3C_PCLK_GATE),
- SAVE_ITEM(S3C_SCLK_GATE),
- SAVE_ITEM(S3C_MEM0_GATE),
-
- SAVE_ITEM(S3C_EPLL_CON1),
- SAVE_ITEM(S3C_EPLL_CON0),
-
SAVE_ITEM(S3C64XX_MEM0DRVCON),
SAVE_ITEM(S3C64XX_MEM1DRVCON),
-
-#ifndef CONFIG_CPU_FREQ
- SAVE_ITEM(S3C_APLL_CON),
- SAVE_ITEM(S3C_MPLL_CON),
-#endif
};
static struct sleep_save misc_save[] = {
diff --git a/arch/arm/mach-s3c64xx/s3c6400.c b/arch/arm/mach-s3c64xx/s3c6400.c
index 4869714..3db0c98 100644
--- a/arch/arm/mach-s3c64xx/s3c6400.c
+++ b/arch/arm/mach-s3c64xx/s3c6400.c
@@ -9,6 +9,10 @@
* published by the Free Software Foundation.
*/
+/*
+ * NOTE: Code in this file is not used when booting with Device Tree support.
+ */
+
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/interrupt.h>
@@ -20,6 +24,7 @@
#include <linux/device.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
+#include <linux/of.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -58,12 +63,6 @@
s3c64xx_onenand1_setname("s3c6400-onenand");
}
-void __init s3c6400_init_clocks(int xtal)
-{
- s3c64xx_register_clocks(xtal, S3C6400_CLKDIV0_ARM_MASK);
- s3c64xx_setup_clocks();
-}
-
void __init s3c6400_init_irq(void)
{
/* VIC0 does not have IRQS 5..7,
@@ -82,6 +81,10 @@
static int __init s3c6400_core_init(void)
{
+ /* Not applicable when using DT. */
+ if (of_have_populated_dt())
+ return 0;
+
return subsys_system_register(&s3c6400_subsys, NULL);
}
diff --git a/arch/arm/mach-s3c64xx/s3c6410.c b/arch/arm/mach-s3c64xx/s3c6410.c
index 31c29fd..72b2278 100644
--- a/arch/arm/mach-s3c64xx/s3c6410.c
+++ b/arch/arm/mach-s3c64xx/s3c6410.c
@@ -10,6 +10,10 @@
* published by the Free Software Foundation.
*/
+/*
+ * NOTE: Code in this file is not used when booting with Device Tree support.
+ */
+
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/interrupt.h>
@@ -21,6 +25,7 @@
#include <linux/device.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
+#include <linux/of.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -62,13 +67,6 @@
s3c_cfcon_setname("s3c64xx-pata");
}
-void __init s3c6410_init_clocks(int xtal)
-{
- printk(KERN_DEBUG "%s: initialising clocks\n", __func__);
- s3c64xx_register_clocks(xtal, S3C6410_CLKDIV0_ARM_MASK);
- s3c64xx_setup_clocks();
-}
-
void __init s3c6410_init_irq(void)
{
/* VIC0 is missing IRQ7, VIC1 is fully populated. */
@@ -86,6 +84,10 @@
static int __init s3c6410_core_init(void)
{
+ /* Not applicable when using DT. */
+ if (of_have_populated_dt())
+ return 0;
+
return subsys_system_register(&s3c6410_subsys, NULL);
}
diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h
index 4fb1f03..335beb3 100644
--- a/arch/arm/plat-samsung/include/plat/cpu.h
+++ b/arch/arm/plat-samsung/include/plat/cpu.h
@@ -87,8 +87,12 @@
#endif
#if defined(CONFIG_CPU_S3C6400) || defined(CONFIG_CPU_S3C6410)
+# define soc_is_s3c6400() is_samsung_s3c6400()
+# define soc_is_s3c6410() is_samsung_s3c6410()
# define soc_is_s3c64xx() (is_samsung_s3c6400() || is_samsung_s3c6410())
#else
+# define soc_is_s3c6400() 0
+# define soc_is_s3c6410() 0
# define soc_is_s3c64xx() 0
#endif
diff --git a/arch/arm/plat-samsung/init.c b/arch/arm/plat-samsung/init.c
index 50a3ea0..aa9511b 100644
--- a/arch/arm/plat-samsung/init.c
+++ b/arch/arm/plat-samsung/init.c
@@ -11,12 +11,18 @@
* published by the Free Software Foundation.
*/
+/*
+ * NOTE: Code in this file is not used on S3C64xx when booting with
+ * Device Tree support.
+ */
+
#include <linux/init.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
+#include <linux/of.h>
#include <mach/hardware.h>
@@ -148,8 +154,12 @@
// do the correct init for cpu
- if (cpu == NULL)
+ if (cpu == NULL) {
+ /* Not needed when booting with device tree. */
+ if (of_have_populated_dt())
+ return 0;
panic("s3c_arch_init: NULL cpu\n");
+ }
ret = (cpu->init)();
if (ret != 0)
diff --git a/drivers/clk/samsung/Makefile b/drivers/clk/samsung/Makefile
index 3413380..8eb4799 100644
--- a/drivers/clk/samsung/Makefile
+++ b/drivers/clk/samsung/Makefile
@@ -8,6 +8,4 @@
obj-$(CONFIG_SOC_EXYNOS5420) += clk-exynos5420.o
obj-$(CONFIG_SOC_EXYNOS5440) += clk-exynos5440.o
obj-$(CONFIG_ARCH_EXYNOS) += clk-exynos-audss.o
-ifdef CONFIG_COMMON_CLK
obj-$(CONFIG_ARCH_S3C64XX) += clk-s3c64xx.o
-endif
diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c
index 358a21c..29b5d67 100644
--- a/drivers/gpio/gpio-samsung.c
+++ b/drivers/gpio/gpio-samsung.c
@@ -2082,34 +2082,14 @@
int i, nr_chips;
int group = 0;
-#if defined(CONFIG_PINCTRL_EXYNOS) || defined(CONFIG_PINCTRL_EXYNOS5440)
/*
- * This gpio driver includes support for device tree support and there
- * are platforms using it. In order to maintain compatibility with those
- * platforms, and to allow non-dt Exynos4210 platforms to use this
- * gpiolib support, a check is added to find out if there is a active
- * pin-controller driver support available. If it is available, this
- * gpiolib support is ignored and the gpiolib support available in
- * pin-controller driver is used. This is a temporary check and will go
- * away when all of the Exynos4210 platforms have switched to using
- * device tree and the pin-ctrl driver.
- */
- struct device_node *pctrl_np;
- static const struct of_device_id exynos_pinctrl_ids[] = {
- { .compatible = "samsung,s3c2412-pinctrl", },
- { .compatible = "samsung,s3c2416-pinctrl", },
- { .compatible = "samsung,s3c2440-pinctrl", },
- { .compatible = "samsung,s3c2450-pinctrl", },
- { .compatible = "samsung,exynos4210-pinctrl", },
- { .compatible = "samsung,exynos4x12-pinctrl", },
- { .compatible = "samsung,exynos5250-pinctrl", },
- { .compatible = "samsung,exynos5440-pinctrl", },
- { }
- };
- for_each_matching_node(pctrl_np, exynos_pinctrl_ids)
- if (pctrl_np && of_device_is_available(pctrl_np))
- return -ENODEV;
-#endif
+ * Currently there are two drivers that can provide GPIO support for
+ * Samsung SoCs. For device tree enabled platforms, the new
+ * pinctrl-samsung driver is used, providing both GPIO and pin control
+ * interfaces. For legacy (non-DT) platforms this driver is used.
+ */
+ if (of_have_populated_dt())
+ return -ENODEV;
samsung_gpiolib_set_cfg(samsung_gpio_cfgs, ARRAY_SIZE(samsung_gpio_cfgs));
diff --git a/drivers/irqchip/irq-vic.c b/drivers/irqchip/irq-vic.c
index 2bbb004..8e21ae0 100644
--- a/drivers/irqchip/irq-vic.c
+++ b/drivers/irqchip/irq-vic.c
@@ -469,6 +469,8 @@
int __init vic_of_init(struct device_node *node, struct device_node *parent)
{
void __iomem *regs;
+ u32 interrupt_mask = ~0;
+ u32 wakeup_mask = ~0;
if (WARN(parent, "non-root VICs are not supported"))
return -EINVAL;
@@ -477,10 +479,13 @@
if (WARN_ON(!regs))
return -EIO;
+ of_property_read_u32(node, "valid-mask", &interrupt_mask);
+ of_property_read_u32(node, "valid-wakeup-mask", &wakeup_mask);
+
/*
* Passing 0 as first IRQ makes the simple domain allocate descriptors
*/
- __vic_init(regs, 0, ~0, ~0, node);
+ __vic_init(regs, 0, interrupt_mask, wakeup_mask, node);
return 0;
}
diff --git a/drivers/usb/host/ohci-s3c2410.c b/drivers/usb/host/ohci-s3c2410.c
index 4919afa..1adff32 100644
--- a/drivers/usb/host/ohci-s3c2410.c
+++ b/drivers/usb/host/ohci-s3c2410.c
@@ -47,10 +47,10 @@
dev_dbg(&dev->dev, "s3c2410_start_hc:\n");
- clk_enable(usb_clk);
+ clk_prepare_enable(usb_clk);
mdelay(2); /* let the bus clock stabilise */
- clk_enable(clk);
+ clk_prepare_enable(clk);
if (info != NULL) {
info->hcd = hcd;
@@ -75,8 +75,8 @@
(info->enable_oc)(info, 0);
}
- clk_disable(clk);
- clk_disable(usb_clk);
+ clk_disable_unprepare(clk);
+ clk_disable_unprepare(usb_clk);
}
/* ohci_s3c2410_hub_status_data