V4L/DVB (9759): em28xx: move gpio tables to the top of em28xx-cards
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c
index 1ade8c4..9b921fd 100644
--- a/drivers/media/video/em28xx/em28xx-cards.c
+++ b/drivers/media/video/em28xx/em28xx-cards.c
@@ -51,6 +51,78 @@
unsigned int tuner;
};
+/*
+ * Reset sequences for analog/digital modes
+ */
+
+/* Reset for the most [analog] boards */
+static struct em28xx_reg_seq default_analog[] = {
+ {EM28XX_R08_GPIO, 0x6d, ~EM_GPIO_4, 10},
+ { -1, -1, -1, -1},
+};
+
+/* Reset for the most [digital] boards */
+static struct em28xx_reg_seq default_digital[] = {
+ {EM28XX_R08_GPIO, 0x6e, ~EM_GPIO_4, 10},
+ { -1, -1, -1, -1},
+};
+
+/* Board Hauppauge WinTV HVR 900 analog */
+static struct em28xx_reg_seq hauppauge_wintv_hvr_900_analog[] = {
+ {EM28XX_R08_GPIO, 0x2d, ~EM_GPIO_4, 10},
+ {0x05, 0xff, 0x10, 10},
+ { -1, -1, -1, -1},
+};
+
+/* Board Hauppauge WinTV HVR 900 digital */
+static struct em28xx_reg_seq hauppauge_wintv_hvr_900_digital[] = {
+ {EM28XX_R08_GPIO, 0x2e, ~EM_GPIO_4, 10},
+ {EM2880_R04_GPO, 0x04, 0x0f, 10},
+ {EM2880_R04_GPO, 0x0c, 0x0f, 10},
+ { -1, -1, -1, -1},
+};
+
+/* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */
+static struct em28xx_reg_seq em2880_msi_digivox_ad_analog[] = {
+ {EM28XX_R08_GPIO, 0x69, ~EM_GPIO_4, 10},
+ { -1, -1, -1, -1},
+};
+
+/* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */
+static struct em28xx_reg_seq em2880_msi_digivox_ad_digital[] = {
+ {EM28XX_R08_GPIO, 0x6a, ~EM_GPIO_4, 10},
+ { -1, -1, -1, -1},
+};
+
+/* Board - EM2870 Kworld 355u
+ Analog - No input analog */
+static struct em28xx_reg_seq em2870_kworld_355u_digital[] = {
+ {EM2880_R04_GPO, 0x01, 0xff, 10},
+ { -1, -1, -1, -1},
+};
+
+/* Callback for the most boards */
+static struct em28xx_reg_seq default_callback[] = {
+ {EM28XX_R08_GPIO, EM_GPIO_4, EM_GPIO_4, 10},
+ {EM28XX_R08_GPIO, 0, EM_GPIO_4, 10},
+ {EM28XX_R08_GPIO, EM_GPIO_4, EM_GPIO_4, 10},
+ { -1, -1, -1, -1},
+};
+
+/* Pinnacle PCTV HD Mini (80e) GPIOs
+ 0-5: not used
+ 6: demod reset, active low
+ 7: LED on, active high */
+static struct em28xx_reg_seq em2874_pinnacle_80e_digital[] = {
+ {EM28XX_R06_I2C_CLK, 0x45, 0xff, 10}, /*400 KHz*/
+ {EM2874_R80_GPIO, 0x80, 0xff, 100},/*Demod reset*/
+ {EM2874_R80_GPIO, 0xc0, 0xff, 10},
+ { -1, -1, -1, -1},
+};
+
+/*
+ * Board definitions
+ */
struct em28xx_board em28xx_boards[] = {
[EM2750_BOARD_UNKNOWN] = {
.name = "Unknown EM2750/EM2751 webcam grabber",
@@ -1149,75 +1221,6 @@
MODULE_DEVICE_TABLE(usb, em28xx_id_table);
/*
- * Reset sequences for analog/digital modes
- */
-
-/* Reset for the most [analog] boards */
-static struct em28xx_reg_seq default_analog[] = {
- {EM28XX_R08_GPIO, 0x6d, ~EM_GPIO_4, 10},
- { -1, -1, -1, -1},
-};
-
-/* Reset for the most [digital] boards */
-static struct em28xx_reg_seq default_digital[] = {
- {EM28XX_R08_GPIO, 0x6e, ~EM_GPIO_4, 10},
- { -1, -1, -1, -1},
-};
-
-/* Board Hauppauge WinTV HVR 900 analog */
-static struct em28xx_reg_seq hauppauge_wintv_hvr_900_analog[] = {
- {EM28XX_R08_GPIO, 0x2d, ~EM_GPIO_4, 10},
- {0x05, 0xff, 0x10, 10},
- { -1, -1, -1, -1},
-};
-
-/* Board Hauppauge WinTV HVR 900 digital */
-static struct em28xx_reg_seq hauppauge_wintv_hvr_900_digital[] = {
- {EM28XX_R08_GPIO, 0x2e, ~EM_GPIO_4, 10},
- {EM2880_R04_GPO, 0x04, 0x0f, 10},
- {EM2880_R04_GPO, 0x0c, 0x0f, 10},
- { -1, -1, -1, -1},
-};
-
-/* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */
-static struct em28xx_reg_seq em2880_msi_digivox_ad_analog[] = {
- {EM28XX_R08_GPIO, 0x69, ~EM_GPIO_4, 10},
- { -1, -1, -1, -1},
-};
-
-/* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */
-static struct em28xx_reg_seq em2880_msi_digivox_ad_digital[] = {
- {EM28XX_R08_GPIO, 0x6a, ~EM_GPIO_4, 10},
- { -1, -1, -1, -1},
-};
-
-/* Board - EM2870 Kworld 355u
- Analog - No input analog */
-static struct em28xx_reg_seq em2870_kworld_355u_digital[] = {
- {EM2880_R04_GPO, 0x01, 0xff, 10},
- { -1, -1, -1, -1},
-};
-
-/* Callback for the most boards */
-static struct em28xx_reg_seq default_callback[] = {
- {EM28XX_R08_GPIO, EM_GPIO_4, EM_GPIO_4, 10},
- {EM28XX_R08_GPIO, 0, EM_GPIO_4, 10},
- {EM28XX_R08_GPIO, EM_GPIO_4, EM_GPIO_4, 10},
- { -1, -1, -1, -1},
-};
-
-/* Pinnacle PCTV HD Mini (80e) GPIOs
- 0-5: not used
- 6: demod reset, active low
- 7: LED on, active high */
-static struct em28xx_reg_seq em2874_pinnacle_80e_digital[] = {
- {EM28XX_R06_I2C_CLK, 0x45, 0xff, 10}, /*400 KHz*/
- {EM2874_R80_GPIO, 0x80, 0xff, 100},/*Demod reset*/
- {EM2874_R80_GPIO, 0xc0, 0xff, 10},
- { -1, -1, -1, -1},
-};
-
-/*
* EEPROM hash table for devices with generic USB IDs
*/
static struct em28xx_hash_table em28xx_eeprom_hash [] = {