| /* |
| * drivers/media/i2c/lm3560.c |
| * General device driver for TI lm3560, FLASH LED Driver |
| * |
| * Copyright (C) 2013 Texas Instruments |
| * |
| * Contact: Daniel Jeong <gshark.jeong@gmail.com> |
| * Ldd-Mlp <ldd-mlp@list.ti.com> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA |
| * 02110-1301 USA |
| * |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/module.h> |
| #include <linux/i2c.h> |
| #include <linux/slab.h> |
| #include <linux/mutex.h> |
| #include <linux/regmap.h> |
| #include <linux/videodev2.h> |
| #include <media/lm3560.h> |
| #include <media/v4l2-ctrls.h> |
| #include <media/v4l2-device.h> |
| |
| /* registers definitions */ |
| #define REG_ENABLE 0x10 |
| #define REG_TORCH_BR 0xa0 |
| #define REG_FLASH_BR 0xb0 |
| #define REG_FLASH_TOUT 0xc0 |
| #define REG_FLAG 0xd0 |
| #define REG_CONFIG1 0xe0 |
| |
| /* Fault Mask */ |
| #define FAULT_TIMEOUT (1<<0) |
| #define FAULT_OVERTEMP (1<<1) |
| #define FAULT_SHORT_CIRCUIT (1<<2) |
| |
| enum led_enable { |
| MODE_SHDN = 0x0, |
| MODE_TORCH = 0x2, |
| MODE_FLASH = 0x3, |
| }; |
| |
| /* struct lm3560_flash |
| * |
| * @pdata: platform data |
| * @regmap: reg. map for i2c |
| * @lock: muxtex for serial access. |
| * @led_mode: V4L2 LED mode |
| * @ctrls_led: V4L2 contols |
| * @subdev_led: V4L2 subdev |
| */ |
| struct lm3560_flash { |
| struct device *dev; |
| struct lm3560_platform_data *pdata; |
| struct regmap *regmap; |
| struct mutex lock; |
| |
| enum v4l2_flash_led_mode led_mode; |
| struct v4l2_ctrl_handler ctrls_led[LM3560_LED_MAX]; |
| struct v4l2_subdev subdev_led[LM3560_LED_MAX]; |
| }; |
| |
| #define to_lm3560_flash(_ctrl, _no) \ |
| container_of(_ctrl->handler, struct lm3560_flash, ctrls_led[_no]) |
| |
| /* enable mode control */ |
| static int lm3560_mode_ctrl(struct lm3560_flash *flash) |
| { |
| int rval = -EINVAL; |
| |
| switch (flash->led_mode) { |
| case V4L2_FLASH_LED_MODE_NONE: |
| rval = regmap_update_bits(flash->regmap, |
| REG_ENABLE, 0x03, MODE_SHDN); |
| break; |
| case V4L2_FLASH_LED_MODE_TORCH: |
| rval = regmap_update_bits(flash->regmap, |
| REG_ENABLE, 0x03, MODE_TORCH); |
| break; |
| case V4L2_FLASH_LED_MODE_FLASH: |
| rval = regmap_update_bits(flash->regmap, |
| REG_ENABLE, 0x03, MODE_FLASH); |
| break; |
| } |
| return rval; |
| } |
| |
| /* led1/2 enable/disable */ |
| static int lm3560_enable_ctrl(struct lm3560_flash *flash, |
| enum lm3560_led_id led_no, bool on) |
| { |
| int rval; |
| |
| if (led_no == LM3560_LED0) { |
| if (on == true) |
| rval = regmap_update_bits(flash->regmap, |
| REG_ENABLE, 0x08, 0x08); |
| else |
| rval = regmap_update_bits(flash->regmap, |
| REG_ENABLE, 0x08, 0x00); |
| } else { |
| if (on == true) |
| rval = regmap_update_bits(flash->regmap, |
| REG_ENABLE, 0x10, 0x10); |
| else |
| rval = regmap_update_bits(flash->regmap, |
| REG_ENABLE, 0x10, 0x00); |
| } |
| return rval; |
| } |
| |
| /* torch1/2 brightness control */ |
| static int lm3560_torch_brt_ctrl(struct lm3560_flash *flash, |
| enum lm3560_led_id led_no, unsigned int brt) |
| { |
| int rval; |
| u8 br_bits; |
| |
| if (brt < LM3560_TORCH_BRT_MIN) |
| return lm3560_enable_ctrl(flash, led_no, false); |
| else |
| rval = lm3560_enable_ctrl(flash, led_no, true); |
| |
| br_bits = LM3560_TORCH_BRT_uA_TO_REG(brt); |
| if (led_no == LM3560_LED0) |
| rval = regmap_update_bits(flash->regmap, |
| REG_TORCH_BR, 0x07, br_bits); |
| else |
| rval = regmap_update_bits(flash->regmap, |
| REG_TORCH_BR, 0x38, br_bits << 3); |
| |
| return rval; |
| } |
| |
| /* flash1/2 brightness control */ |
| static int lm3560_flash_brt_ctrl(struct lm3560_flash *flash, |
| enum lm3560_led_id led_no, unsigned int brt) |
| { |
| int rval; |
| u8 br_bits; |
| |
| if (brt < LM3560_FLASH_BRT_MIN) |
| return lm3560_enable_ctrl(flash, led_no, false); |
| else |
| rval = lm3560_enable_ctrl(flash, led_no, true); |
| |
| br_bits = LM3560_FLASH_BRT_uA_TO_REG(brt); |
| if (led_no == LM3560_LED0) |
| rval = regmap_update_bits(flash->regmap, |
| REG_FLASH_BR, 0x0f, br_bits); |
| else |
| rval = regmap_update_bits(flash->regmap, |
| REG_FLASH_BR, 0xf0, br_bits << 4); |
| |
| return rval; |
| } |
| |
| /* V4L2 controls */ |
| static int lm3560_get_ctrl(struct v4l2_ctrl *ctrl, enum lm3560_led_id led_no) |
| { |
| struct lm3560_flash *flash = to_lm3560_flash(ctrl, led_no); |
| |
| mutex_lock(&flash->lock); |
| |
| if (ctrl->id == V4L2_CID_FLASH_FAULT) { |
| int rval; |
| s32 fault = 0; |
| unsigned int reg_val; |
| rval = regmap_read(flash->regmap, REG_FLAG, ®_val); |
| if (rval < 0) |
| return rval; |
| if (rval & FAULT_SHORT_CIRCUIT) |
| fault |= V4L2_FLASH_FAULT_SHORT_CIRCUIT; |
| if (rval & FAULT_OVERTEMP) |
| fault |= V4L2_FLASH_FAULT_OVER_TEMPERATURE; |
| if (rval & FAULT_TIMEOUT) |
| fault |= V4L2_FLASH_FAULT_TIMEOUT; |
| ctrl->cur.val = fault; |
| return 0; |
| } |
| |
| mutex_unlock(&flash->lock); |
| return -EINVAL; |
| } |
| |
| static int lm3560_set_ctrl(struct v4l2_ctrl *ctrl, enum lm3560_led_id led_no) |
| { |
| struct lm3560_flash *flash = to_lm3560_flash(ctrl, led_no); |
| u8 tout_bits; |
| int rval = -EINVAL; |
| |
| mutex_lock(&flash->lock); |
| |
| switch (ctrl->id) { |
| case V4L2_CID_FLASH_LED_MODE: |
| flash->led_mode = ctrl->val; |
| if (flash->led_mode != V4L2_FLASH_LED_MODE_FLASH) |
| rval = lm3560_mode_ctrl(flash); |
| break; |
| |
| case V4L2_CID_FLASH_STROBE_SOURCE: |
| rval = regmap_update_bits(flash->regmap, |
| REG_CONFIG1, 0x04, (ctrl->val) << 2); |
| if (rval < 0) |
| goto err_out; |
| break; |
| |
| case V4L2_CID_FLASH_STROBE: |
| if (flash->led_mode != V4L2_FLASH_LED_MODE_FLASH) |
| return -EBUSY; |
| flash->led_mode = V4L2_FLASH_LED_MODE_FLASH; |
| rval = lm3560_mode_ctrl(flash); |
| break; |
| |
| case V4L2_CID_FLASH_STROBE_STOP: |
| if (flash->led_mode != V4L2_FLASH_LED_MODE_FLASH) |
| return -EBUSY; |
| flash->led_mode = V4L2_FLASH_LED_MODE_NONE; |
| rval = lm3560_mode_ctrl(flash); |
| break; |
| |
| case V4L2_CID_FLASH_TIMEOUT: |
| tout_bits = LM3560_FLASH_TOUT_ms_TO_REG(ctrl->val); |
| rval = regmap_update_bits(flash->regmap, |
| REG_FLASH_TOUT, 0x1f, tout_bits); |
| break; |
| |
| case V4L2_CID_FLASH_INTENSITY: |
| rval = lm3560_flash_brt_ctrl(flash, led_no, ctrl->val); |
| break; |
| |
| case V4L2_CID_FLASH_TORCH_INTENSITY: |
| rval = lm3560_torch_brt_ctrl(flash, led_no, ctrl->val); |
| break; |
| } |
| |
| mutex_unlock(&flash->lock); |
| err_out: |
| return rval; |
| } |
| |
| static int lm3560_led1_get_ctrl(struct v4l2_ctrl *ctrl) |
| { |
| return lm3560_get_ctrl(ctrl, LM3560_LED1); |
| } |
| |
| static int lm3560_led1_set_ctrl(struct v4l2_ctrl *ctrl) |
| { |
| return lm3560_set_ctrl(ctrl, LM3560_LED1); |
| } |
| |
| static int lm3560_led0_get_ctrl(struct v4l2_ctrl *ctrl) |
| { |
| return lm3560_get_ctrl(ctrl, LM3560_LED0); |
| } |
| |
| static int lm3560_led0_set_ctrl(struct v4l2_ctrl *ctrl) |
| { |
| return lm3560_set_ctrl(ctrl, LM3560_LED0); |
| } |
| |
| static const struct v4l2_ctrl_ops lm3560_led_ctrl_ops[LM3560_LED_MAX] = { |
| [LM3560_LED0] = { |
| .g_volatile_ctrl = lm3560_led0_get_ctrl, |
| .s_ctrl = lm3560_led0_set_ctrl, |
| }, |
| [LM3560_LED1] = { |
| .g_volatile_ctrl = lm3560_led1_get_ctrl, |
| .s_ctrl = lm3560_led1_set_ctrl, |
| } |
| }; |
| |
| static int lm3560_init_controls(struct lm3560_flash *flash, |
| enum lm3560_led_id led_no) |
| { |
| struct v4l2_ctrl *fault; |
| u32 max_flash_brt = flash->pdata->max_flash_brt[led_no]; |
| u32 max_torch_brt = flash->pdata->max_torch_brt[led_no]; |
| struct v4l2_ctrl_handler *hdl = &flash->ctrls_led[led_no]; |
| const struct v4l2_ctrl_ops *ops = &lm3560_led_ctrl_ops[led_no]; |
| |
| v4l2_ctrl_handler_init(hdl, 8); |
| /* flash mode */ |
| v4l2_ctrl_new_std_menu(hdl, ops, V4L2_CID_FLASH_LED_MODE, |
| V4L2_FLASH_LED_MODE_TORCH, ~0x7, |
| V4L2_FLASH_LED_MODE_NONE); |
| flash->led_mode = V4L2_FLASH_LED_MODE_NONE; |
| |
| /* flash source */ |
| v4l2_ctrl_new_std_menu(hdl, ops, V4L2_CID_FLASH_STROBE_SOURCE, |
| 0x1, ~0x3, V4L2_FLASH_STROBE_SOURCE_SOFTWARE); |
| |
| /* flash strobe */ |
| v4l2_ctrl_new_std(hdl, ops, V4L2_CID_FLASH_STROBE, 0, 0, 0, 0); |
| /* flash strobe stop */ |
| v4l2_ctrl_new_std(hdl, ops, V4L2_CID_FLASH_STROBE_STOP, 0, 0, 0, 0); |
| |
| /* flash strobe timeout */ |
| v4l2_ctrl_new_std(hdl, ops, V4L2_CID_FLASH_TIMEOUT, |
| LM3560_FLASH_TOUT_MIN, |
| flash->pdata->max_flash_timeout, |
| LM3560_FLASH_TOUT_STEP, |
| flash->pdata->max_flash_timeout); |
| |
| /* flash brt */ |
| v4l2_ctrl_new_std(hdl, ops, V4L2_CID_FLASH_INTENSITY, |
| LM3560_FLASH_BRT_MIN, max_flash_brt, |
| LM3560_FLASH_BRT_STEP, max_flash_brt); |
| |
| /* torch brt */ |
| v4l2_ctrl_new_std(hdl, ops, V4L2_CID_FLASH_TORCH_INTENSITY, |
| LM3560_TORCH_BRT_MIN, max_torch_brt, |
| LM3560_TORCH_BRT_STEP, max_torch_brt); |
| |
| /* fault */ |
| fault = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_FLASH_FAULT, 0, |
| V4L2_FLASH_FAULT_OVER_VOLTAGE |
| | V4L2_FLASH_FAULT_OVER_TEMPERATURE |
| | V4L2_FLASH_FAULT_SHORT_CIRCUIT |
| | V4L2_FLASH_FAULT_TIMEOUT, 0, 0); |
| if (fault != NULL) |
| fault->flags |= V4L2_CTRL_FLAG_VOLATILE; |
| |
| if (hdl->error) |
| return hdl->error; |
| |
| flash->subdev_led[led_no].ctrl_handler = hdl; |
| return 0; |
| } |
| |
| /* initialize device */ |
| static const struct v4l2_subdev_ops lm3560_ops = { |
| .core = NULL, |
| }; |
| |
| static const struct regmap_config lm3560_regmap = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| .max_register = 0xFF, |
| }; |
| |
| static int lm3560_subdev_init(struct lm3560_flash *flash, |
| enum lm3560_led_id led_no, char *led_name) |
| { |
| struct i2c_client *client = to_i2c_client(flash->dev); |
| int rval; |
| |
| v4l2_i2c_subdev_init(&flash->subdev_led[led_no], client, &lm3560_ops); |
| flash->subdev_led[led_no].flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; |
| strcpy(flash->subdev_led[led_no].name, led_name); |
| rval = lm3560_init_controls(flash, led_no); |
| if (rval) |
| goto err_out; |
| rval = media_entity_init(&flash->subdev_led[led_no].entity, 0, NULL, 0); |
| if (rval < 0) |
| goto err_out; |
| flash->subdev_led[led_no].entity.type = MEDIA_ENT_T_V4L2_SUBDEV_FLASH; |
| |
| return rval; |
| |
| err_out: |
| v4l2_ctrl_handler_free(&flash->ctrls_led[led_no]); |
| return rval; |
| } |
| |
| static int lm3560_init_device(struct lm3560_flash *flash) |
| { |
| int rval; |
| unsigned int reg_val; |
| |
| /* set peak current */ |
| rval = regmap_update_bits(flash->regmap, |
| REG_FLASH_TOUT, 0x60, flash->pdata->peak); |
| if (rval < 0) |
| return rval; |
| /* output disable */ |
| flash->led_mode = V4L2_FLASH_LED_MODE_NONE; |
| rval = lm3560_mode_ctrl(flash); |
| if (rval < 0) |
| return rval; |
| /* Reset faults */ |
| rval = regmap_read(flash->regmap, REG_FLAG, ®_val); |
| return rval; |
| } |
| |
| static int lm3560_probe(struct i2c_client *client, |
| const struct i2c_device_id *devid) |
| { |
| struct lm3560_flash *flash; |
| struct lm3560_platform_data *pdata = dev_get_platdata(&client->dev); |
| int rval; |
| |
| flash = devm_kzalloc(&client->dev, sizeof(*flash), GFP_KERNEL); |
| if (flash == NULL) |
| return -ENOMEM; |
| |
| flash->regmap = devm_regmap_init_i2c(client, &lm3560_regmap); |
| if (IS_ERR(flash->regmap)) { |
| rval = PTR_ERR(flash->regmap); |
| return rval; |
| } |
| |
| /* if there is no platform data, use chip default value */ |
| if (pdata == NULL) { |
| pdata = |
| kzalloc(sizeof(struct lm3560_platform_data), GFP_KERNEL); |
| if (pdata == NULL) |
| return -ENODEV; |
| pdata->peak = LM3560_PEAK_3600mA; |
| pdata->max_flash_timeout = LM3560_FLASH_TOUT_MAX; |
| /* led 1 */ |
| pdata->max_flash_brt[LM3560_LED0] = LM3560_FLASH_BRT_MAX; |
| pdata->max_torch_brt[LM3560_LED0] = LM3560_TORCH_BRT_MAX; |
| /* led 2 */ |
| pdata->max_flash_brt[LM3560_LED1] = LM3560_FLASH_BRT_MAX; |
| pdata->max_torch_brt[LM3560_LED1] = LM3560_TORCH_BRT_MAX; |
| } |
| flash->pdata = pdata; |
| flash->dev = &client->dev; |
| mutex_init(&flash->lock); |
| |
| rval = lm3560_subdev_init(flash, LM3560_LED0, "lm3560-led0"); |
| if (rval < 0) |
| return rval; |
| |
| rval = lm3560_subdev_init(flash, LM3560_LED1, "lm3560-led1"); |
| if (rval < 0) |
| return rval; |
| |
| rval = lm3560_init_device(flash); |
| if (rval < 0) |
| return rval; |
| |
| return 0; |
| } |
| |
| static int lm3560_remove(struct i2c_client *client) |
| { |
| struct v4l2_subdev *subdev = i2c_get_clientdata(client); |
| struct lm3560_flash *flash = container_of(subdev, struct lm3560_flash, |
| subdev_led[LM3560_LED_MAX]); |
| unsigned int i; |
| |
| for (i = LM3560_LED0; i < LM3560_LED_MAX; i++) { |
| v4l2_device_unregister_subdev(&flash->subdev_led[i]); |
| v4l2_ctrl_handler_free(&flash->ctrls_led[i]); |
| media_entity_cleanup(&flash->subdev_led[i].entity); |
| } |
| |
| return 0; |
| } |
| |
| static const struct i2c_device_id lm3560_id_table[] = { |
| {LM3560_NAME, 0}, |
| {} |
| }; |
| |
| MODULE_DEVICE_TABLE(i2c, lm3560_id_table); |
| |
| static struct i2c_driver lm3560_i2c_driver = { |
| .driver = { |
| .name = LM3560_NAME, |
| .pm = NULL, |
| }, |
| .probe = lm3560_probe, |
| .remove = lm3560_remove, |
| .id_table = lm3560_id_table, |
| }; |
| |
| module_i2c_driver(lm3560_i2c_driver); |
| |
| MODULE_AUTHOR("Daniel Jeong <gshark.jeong@gmail.com>"); |
| MODULE_AUTHOR("Ldd Mlp <ldd-mlp@list.ti.com>"); |
| MODULE_DESCRIPTION("Texas Instruments LM3560 LED flash driver"); |
| MODULE_LICENSE("GPL"); |