ath5k: Use high bitrates for ACK/CTS
There was a confusion in the usage of the bits AR5K_STA_ID1_ACKCTS_6MB and
AR5K_STA_ID1_BASE_RATE_11B. If they are set (1), we will get lower bitrates for
ACK and CTS. Therefore ath5k_hw_set_ack_bitrate_high(ah, false) actually
resulted in high bitrates, which i think is what we want anyways. Cleared the
confusion and added some documentation.
Signed-off-by: Bruno Randolf <br1@einfach.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c
index f7f57c1..3f59bc2 100644
--- a/drivers/net/wireless/ath/ath5k/base.c
+++ b/drivers/net/wireless/ath/ath5k/base.c
@@ -2558,8 +2558,7 @@
for (i = 0; i < AR5K_KEYTABLE_SIZE; i++)
ath5k_hw_reset_key(ah, i);
- /* Set ack to be sent at low bit-rates */
- ath5k_hw_set_ack_bitrate_high(ah, false);
+ ath5k_hw_set_ack_bitrate_high(ah, true);
ret = 0;
done:
mmiowb();
diff --git a/drivers/net/wireless/ath/ath5k/pcu.c b/drivers/net/wireless/ath/ath5k/pcu.c
index 710870e..174412f 100644
--- a/drivers/net/wireless/ath/ath5k/pcu.c
+++ b/drivers/net/wireless/ath/ath5k/pcu.c
@@ -154,9 +154,9 @@
else {
u32 val = AR5K_STA_ID1_BASE_RATE_11B | AR5K_STA_ID1_ACKCTS_6MB;
if (high)
- AR5K_REG_ENABLE_BITS(ah, AR5K_STA_ID1, val);
- else
AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, val);
+ else
+ AR5K_REG_ENABLE_BITS(ah, AR5K_STA_ID1, val);
}
}
diff --git a/drivers/net/wireless/ath/ath5k/reg.h b/drivers/net/wireless/ath/ath5k/reg.h
index 45d62e9..55b4ac6d 100644
--- a/drivers/net/wireless/ath/ath5k/reg.h
+++ b/drivers/net/wireless/ath/ath5k/reg.h
@@ -1139,8 +1139,8 @@
#define AR5K_STA_ID1_DEFAULT_ANTENNA 0x00200000 /* Use default antenna */
#define AR5K_STA_ID1_DESC_ANTENNA 0x00400000 /* Update antenna from descriptor */
#define AR5K_STA_ID1_RTS_DEF_ANTENNA 0x00800000 /* Use default antenna for RTS */
-#define AR5K_STA_ID1_ACKCTS_6MB 0x01000000 /* Use 6Mbit/s for ACK/CTS */
-#define AR5K_STA_ID1_BASE_RATE_11B 0x02000000 /* Use 11b base rate for ACK/CTS [5211+] */
+#define AR5K_STA_ID1_ACKCTS_6MB 0x01000000 /* Rate to use for ACK/CTS. 0: highest mandatory rate <= RX rate; 1: 1Mbps in B mode */
+#define AR5K_STA_ID1_BASE_RATE_11B 0x02000000 /* 802.11b base rate. 0: 1, 2, 5.5 and 11Mbps; 1: 1 and 2Mbps. [5211+] */
#define AR5K_STA_ID1_SELFGEN_DEF_ANT 0x04000000 /* Use def. antenna for self generated frames */
#define AR5K_STA_ID1_CRYPT_MIC_EN 0x08000000 /* Enable MIC */
#define AR5K_STA_ID1_KEYSRCH_MODE 0x10000000 /* Look up key when key id != 0 */