Gitiles
Code Review Sign In
gerrit-public.fairphone.software / kernel / msm-4.9 / 0f4954819fb6f840d46076f0dbd313ef5da48f5d / . / drivers / isdn / hardware / mISDN / hfcmulti.c
blob: 97f4708b38795fe030fc6e92d3004697edc44c9b [file] [log] [blame]
/*
* hfcmulti.c low level driver for hfc-4s/hfc-8s/hfc-e1 based cards
*
* Author Andreas Eversberg (jolly@eversberg.eu)
* ported to mqueue mechanism:
* Peter Sprenger (sprengermoving-bytes.de)
*
* inspired by existing hfc-pci driver:
* Copyright 1999 by Werner Cornelius (werner@isdn-development.de)
* Copyright 2008 by Karsten Keil (kkeil@suse.de)
* Copyright 2008 by Andreas Eversberg (jolly@eversberg.eu)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2, or (at your option)
* any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
*
* Thanks to Cologne Chip AG for this great controller!
*/
/*
* module parameters:
* type:
* By default (0), the card is automatically detected.
* Or use the following combinations:
* Bit 0-7 = 0x00001 = HFC-E1 (1 port)
* or Bit 0-7 = 0x00004 = HFC-4S (4 ports)
* or Bit 0-7 = 0x00008 = HFC-8S (8 ports)
* Bit 8 = 0x00100 = uLaw (instead of aLaw)
* Bit 9 = 0x00200 = Disable DTMF detect on all B-channels via hardware
* Bit 10 = spare
* Bit 11 = 0x00800 = Force PCM bus into slave mode. (otherwhise auto)
* or Bit 12 = 0x01000 = Force PCM bus into master mode. (otherwhise auto)
* Bit 13 = spare
* Bit 14 = 0x04000 = Use external ram (128K)
* Bit 15 = 0x08000 = Use external ram (512K)
* Bit 16 = 0x10000 = Use 64 timeslots instead of 32
* or Bit 17 = 0x20000 = Use 128 timeslots instead of anything else
* Bit 18 = spare
* Bit 19 = 0x80000 = Send the Watchdog a Signal (Dual E1 with Watchdog)
* (all other bits are reserved and shall be 0)
* example: 0x20204 one HFC-4S with dtmf detection and 128 timeslots on PCM
* bus (PCM master)
*
* port: (optional or required for all ports on all installed cards)
* HFC-4S/HFC-8S only bits:
* Bit 0 = 0x001 = Use master clock for this S/T interface
* (ony once per chip).
* Bit 1 = 0x002 = transmitter line setup (non capacitive mode)
* Don't use this unless you know what you are doing!
* Bit 2 = 0x004 = Disable E-channel. (No E-channel processing)
* example: 0x0001,0x0000,0x0000,0x0000 one HFC-4S with master clock
* received from port 1
*
* HFC-E1 only bits:
* Bit 0 = 0x0001 = interface: 0=copper, 1=optical
* Bit 1 = 0x0002 = reserved (later for 32 B-channels transparent mode)
* Bit 2 = 0x0004 = Report LOS
* Bit 3 = 0x0008 = Report AIS
* Bit 4 = 0x0010 = Report SLIP
* Bit 5 = 0x0020 = Report RDI
* Bit 8 = 0x0100 = Turn off CRC-4 Multiframe Mode, use double frame
* mode instead.
* Bit 9 = 0x0200 = Force get clock from interface, even in NT mode.
* or Bit 10 = 0x0400 = Force put clock to interface, even in TE mode.
* Bit 11 = 0x0800 = Use direct RX clock for PCM sync rather than PLL.
* (E1 only)
* Bit 12-13 = 0xX000 = elastic jitter buffer (1-3), Set both bits to 0
* for default.
* (all other bits are reserved and shall be 0)
*
* debug:
* NOTE: only one debug value must be given for all cards
* enable debugging (see hfc_multi.h for debug options)
*
* poll:
* NOTE: only one poll value must be given for all cards
* Give the number of samples for each fifo process.
* By default 128 is used. Decrease to reduce delay, increase to
* reduce cpu load. If unsure, don't mess with it!
* Valid is 8, 16, 32, 64, 128, 256.
*
* pcm:
* NOTE: only one pcm value must be given for every card.
* The PCM bus id tells the mISDNdsp module about the connected PCM bus.
* By default (0), the PCM bus id is 100 for the card that is PCM master.
* If multiple cards are PCM master (because they are not interconnected),
* each card with PCM master will have increasing PCM id.
* All PCM busses with the same ID are expected to be connected and have
* common time slots slots.
* Only one chip of the PCM bus must be master, the others slave.
* -1 means no support of PCM bus not even.
* Omit this value, if all cards are interconnected or none is connected.
* If unsure, don't give this parameter.
*
* dslot:
* NOTE: only one poll value must be given for every card.
* Also this value must be given for non-E1 cards. If omitted, the E1
* card has D-channel on time slot 16, which is default.
* If 1..15 or 17..31, an alternate time slot is used for D-channel.
* In this case, the application must be able to handle this.
* If -1 is given, the D-channel is disabled and all 31 slots can be used
* for B-channel. (only for specific applications)
* If you don't know how to use it, you don't need it!
*
* iomode:
* NOTE: only one mode value must be given for every card.
* -> See hfc_multi.h for HFC_IO_MODE_* values
* By default, the IO mode is pci memory IO (MEMIO).
* Some cards requre specific IO mode, so it cannot be changed.
* It may be usefull to set IO mode to register io (REGIO) to solve
* PCI bridge problems.
* If unsure, don't give this parameter.
*
* clockdelay_nt:
* NOTE: only one clockdelay_nt value must be given once for all cards.
* Give the value of the clock control register (A_ST_CLK_DLY)
* of the S/T interfaces in NT mode.
* This register is needed for the TBR3 certification, so don't change it.
*
* clockdelay_te:
* NOTE: only one clockdelay_te value must be given once
* Give the value of the clock control register (A_ST_CLK_DLY)
* of the S/T interfaces in TE mode.
* This register is needed for the TBR3 certification, so don't change it.
*
* clock:
* NOTE: only one clock value must be given once
* Selects interface with clock source for mISDN and applications.
* Set to card number starting with 1. Set to -1 to disable.
* By default, the first card is used as clock source.
*/
/*
* debug register access (never use this, it will flood your system log)
* #define HFC_REGISTER_DEBUG
*/
#define HFC_MULTI_VERSION "2.03"
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/mISDNhw.h>
#include <linux/mISDNdsp.h>
/*
#define IRQCOUNT_DEBUG
#define IRQ_DEBUG
*/
#include "hfc_multi.h"
#ifdef ECHOPREP
#include "gaintab.h"
#endif
#define MAX_CARDS 8
#define MAX_PORTS (8 * MAX_CARDS)
static LIST_HEAD(HFClist);
static spinlock_t HFClock; /* global hfc list lock */
static void ph_state_change(struct dchannel *);
static struct hfc_multi *syncmaster;
static int plxsd_master; /* if we have a master card (yet) */
static spinlock_t plx_lock; /* may not acquire other lock inside */
#define TYP_E1 1
#define TYP_4S 4
#define TYP_8S 8
static int poll_timer = 6; /* default = 128 samples = 16ms */
/* number of POLL_TIMER interrupts for G2 timeout (ca 1s) */
static int nt_t1_count[] = { 3840, 1920, 960, 480, 240, 120, 60, 30 };
#define CLKDEL_TE 0x0f /* CLKDEL in TE mode */
#define CLKDEL_NT 0x6c /* CLKDEL in NT mode
(0x60 MUST be included!) */
#define DIP_4S 0x1 /* DIP Switches for Beronet 1S/2S/4S cards */
#define DIP_8S 0x2 /* DIP Switches for Beronet 8S+ cards */
#define DIP_E1 0x3 /* DIP Switches for Beronet E1 cards */
/*
* module stuff
*/
static uint type[MAX_CARDS];
static int pcm[MAX_CARDS];
static int dslot[MAX_CARDS];
static uint iomode[MAX_CARDS];
static uint port[MAX_PORTS];
static uint debug;
static uint poll;
static int clock;
static uint timer;
static uint clockdelay_te = CLKDEL_TE;
static uint clockdelay_nt = CLKDEL_NT;
static int HFC_cnt, Port_cnt, PCM_cnt = 99;
MODULE_AUTHOR("Andreas Eversberg");
MODULE_LICENSE("GPL");
MODULE_VERSION(HFC_MULTI_VERSION);
module_param(debug, uint, S_IRUGO | S_IWUSR);
module_param(poll, uint, S_IRUGO | S_IWUSR);
module_param(clock, int, S_IRUGO | S_IWUSR);
module_param(timer, uint, S_IRUGO | S_IWUSR);
module_param(clockdelay_te, uint, S_IRUGO | S_IWUSR);
module_param(clockdelay_nt, uint, S_IRUGO | S_IWUSR);
module_param_array(type, uint, NULL, S_IRUGO | S_IWUSR);
module_param_array(pcm, int, NULL, S_IRUGO | S_IWUSR);
module_param_array(dslot, int, NULL, S_IRUGO | S_IWUSR);
module_param_array(iomode, uint, NULL, S_IRUGO | S_IWUSR);
module_param_array(port, uint, NULL, S_IRUGO | S_IWUSR);
#ifdef HFC_REGISTER_DEBUG
#define HFC_outb(hc, reg, val) \
(hc->HFC_outb(hc, reg, val, __func__, __LINE__))
#define HFC_outb_nodebug(hc, reg, val) \
(hc->HFC_outb_nodebug(hc, reg, val, __func__, __LINE__))
#define HFC_inb(hc, reg) \
(hc->HFC_inb(hc, reg, __func__, __LINE__))
#define HFC_inb_nodebug(hc, reg) \
(hc->HFC_inb_nodebug(hc, reg, __func__, __LINE__))
#define HFC_inw(hc, reg) \
(hc->HFC_inw(hc, reg, __func__, __LINE__))
#define HFC_inw_nodebug(hc, reg) \
(hc->HFC_inw_nodebug(hc, reg, __func__, __LINE__))
#define HFC_wait(hc) \
(hc->HFC_wait(hc, __func__, __LINE__))
#define HFC_wait_nodebug(hc) \
(hc->HFC_wait_nodebug(hc, __func__, __LINE__))
#else
#define HFC_outb(hc, reg, val) (hc->HFC_outb(hc, reg, val))
#define HFC_outb_nodebug(hc, reg, val) (hc->HFC_outb_nodebug(hc, reg, val))
#define HFC_inb(hc, reg) (hc->HFC_inb(hc, reg))
#define HFC_inb_nodebug(hc, reg) (hc->HFC_inb_nodebug(hc, reg))
#define HFC_inw(hc, reg) (hc->HFC_inw(hc, reg))
#define HFC_inw_nodebug(hc, reg) (hc->HFC_inw_nodebug(hc, reg))
#define HFC_wait(hc) (hc->HFC_wait(hc))
#define HFC_wait_nodebug(hc) (hc->HFC_wait_nodebug(hc))
#endif
/* HFC_IO_MODE_PCIMEM */
static void
#ifdef HFC_REGISTER_DEBUG
HFC_outb_pcimem(struct hfc_multi *hc, u_char reg, u_char val,
const char *function, int line)
#else
HFC_outb_pcimem(struct hfc_multi *hc, u_char reg, u_char val)
#endif
{
writeb(val, (hc->pci_membase)+reg);
}
static u_char
#ifdef HFC_REGISTER_DEBUG
HFC_inb_pcimem(struct hfc_multi *hc, u_char reg, const char *function, int line)
#else
HFC_inb_pcimem(struct hfc_multi *hc, u_char reg)
#endif
{
return readb((hc->pci_membase)+reg);
}
static u_short
#ifdef HFC_REGISTER_DEBUG
HFC_inw_pcimem(struct hfc_multi *hc, u_char reg, const char *function, int line)
#else
HFC_inw_pcimem(struct hfc_multi *hc, u_char reg)
#endif
{
return readw((hc->pci_membase)+reg);
}
static void
#ifdef HFC_REGISTER_DEBUG
HFC_wait_pcimem(struct hfc_multi *hc, const char *function, int line)
#else
HFC_wait_pcimem(struct hfc_multi *hc)
#endif
{
while (readb((hc->pci_membase)+R_STATUS) & V_BUSY);
}
/* HFC_IO_MODE_REGIO */
static void
#ifdef HFC_REGISTER_DEBUG
HFC_outb_regio(struct hfc_multi *hc, u_char reg, u_char val,
const char *function, int line)
#else
HFC_outb_regio(struct hfc_multi *hc, u_char reg, u_char val)
#endif
{
outb(reg, (hc->pci_iobase)+4);
outb(val, hc->pci_iobase);
}
static u_char
#ifdef HFC_REGISTER_DEBUG
HFC_inb_regio(struct hfc_multi *hc, u_char reg, const char *function, int line)
#else
HFC_inb_regio(struct hfc_multi *hc, u_char reg)
#endif
{
outb(reg, (hc->pci_iobase)+4);
return inb(hc->pci_iobase);
}
static u_short
#ifdef HFC_REGISTER_DEBUG
HFC_inw_regio(struct hfc_multi *hc, u_char reg, const char *function, int line)
#else
HFC_inw_regio(struct hfc_multi *hc, u_char reg)
#endif
{
outb(reg, (hc->pci_iobase)+4);
return inw(hc->pci_iobase);
}
static void
#ifdef HFC_REGISTER_DEBUG
HFC_wait_regio(struct hfc_multi *hc, const char *function, int line)
#else
HFC_wait_regio(struct hfc_multi *hc)
#endif
{
outb(R_STATUS, (hc->pci_iobase)+4);
while (inb(hc->pci_iobase) & V_BUSY);
}
#ifdef HFC_REGISTER_DEBUG
static void
HFC_outb_debug(struct hfc_multi *hc, u_char reg, u_char val,
const char *function, int line)
{
char regname[256] = "", bits[9] = "xxxxxxxx";
int i;
i = -1;
while (hfc_register_names[++i].name) {
if (hfc_register_names[i].reg == reg)
strcat(regname, hfc_register_names[i].name);
}
if (regname[0] == '\0')
strcpy(regname, "register");
bits[7] = '0'+(!!(val&1));
bits[6] = '0'+(!!(val&2));
bits[5] = '0'+(!!(val&4));
bits[4] = '0'+(!!(val&8));
bits[3] = '0'+(!!(val&16));
bits[2] = '0'+(!!(val&32));
bits[1] = '0'+(!!(val&64));
bits[0] = '0'+(!!(val&128));
printk(KERN_DEBUG
"HFC_outb(chip %d, %02x=%s, 0x%02x=%s); in %s() line %d\n",
hc->id, reg, regname, val, bits, function, line);
HFC_outb_nodebug(hc, reg, val);
}
static u_char
HFC_inb_debug(struct hfc_multi *hc, u_char reg, const char *function, int line)
{
char regname[256] = "", bits[9] = "xxxxxxxx";
u_char val = HFC_inb_nodebug(hc, reg);
int i;
i = 0;
while (hfc_register_names[i++].name)
;
while (hfc_register_names[++i].name) {
if (hfc_register_names[i].reg == reg)
strcat(regname, hfc_register_names[i].name);
}
if (regname[0] == '\0')
strcpy(regname, "register");
bits[7] = '0'+(!!(val&1));
bits[6] = '0'+(!!(val&2));
bits[5] = '0'+(!!(val&4));
bits[4] = '0'+(!!(val&8));
bits[3] = '0'+(!!(val&16));
bits[2] = '0'+(!!(val&32));
bits[1] = '0'+(!!(val&64));
bits[0] = '0'+(!!(val&128));
printk(KERN_DEBUG
"HFC_inb(chip %d, %02x=%s) = 0x%02x=%s; in %s() line %d\n",
hc->id, reg, regname, val, bits, function, line);
return val;
}
static u_short
HFC_inw_debug(struct hfc_multi *hc, u_char reg, const char *function, int line)
{
char regname[256] = "";
u_short val = HFC_inw_nodebug(hc, reg);
int i;
i = 0;
while (hfc_register_names[i++].name)
;
while (hfc_register_names[++i].name) {
if (hfc_register_names[i].reg == reg)
strcat(regname, hfc_register_names[i].name);
}
if (regname[0] == '\0')
strcpy(regname, "register");
printk(KERN_DEBUG
"HFC_inw(chip %d, %02x=%s) = 0x%04x; in %s() line %d\n",
hc->id, reg, regname, val, function, line);
return val;
}
static void
HFC_wait_debug(struct hfc_multi *hc, const char *function, int line)
{
printk(KERN_DEBUG "HFC_wait(chip %d); in %s() line %d\n",
hc->id, function, line);
HFC_wait_nodebug(hc);
}
#endif
/* write fifo data (REGIO) */
static void
write_fifo_regio(struct hfc_multi *hc, u_char *data, int len)
{
outb(A_FIFO_DATA0, (hc->pci_iobase)+4);
while (len>>2) {
outl(cpu_to_le32(*(u32 *)data), hc->pci_iobase);
data += 4;
len -= 4;
}
while (len>>1) {
outw(cpu_to_le16(*(u16 *)data), hc->pci_iobase);
data += 2;
len -= 2;
}
while (len) {
outb(*data, hc->pci_iobase);
data++;
len--;
}
}
/* write fifo data (PCIMEM) */
static void
write_fifo_pcimem(struct hfc_multi *hc, u_char *data, int len)
{
while (len>>2) {
writel(cpu_to_le32(*(u32 *)data),
hc->pci_membase + A_FIFO_DATA0);
data += 4;
len -= 4;
}
while (len>>1) {
writew(cpu_to_le16(*(u16 *)data),
hc->pci_membase + A_FIFO_DATA0);
data += 2;
len -= 2;
}
while (len) {
writeb(*data, hc->pci_membase + A_FIFO_DATA0);
data++;
len--;
}
}
/* read fifo data (REGIO) */
static void
read_fifo_regio(struct hfc_multi *hc, u_char *data, int len)
{
outb(A_FIFO_DATA0, (hc->pci_iobase)+4);
while (len>>2) {
*(u32 *)data = le32_to_cpu(inl(hc->pci_iobase));
data += 4;
len -= 4;
}
while (len>>1) {
*(u16 *)data = le16_to_cpu(inw(hc->pci_iobase));
data += 2;
len -= 2;
}
while (len) {
*data = inb(hc->pci_iobase);
data++;
len--;
}
}
/* read fifo data (PCIMEM) */
static void
read_fifo_pcimem(struct hfc_multi *hc, u_char *data, int len)
{
while (len>>2) {
*(u32 *)data =
le32_to_cpu(readl(hc->pci_membase + A_FIFO_DATA0));
data += 4;
len -= 4;
}
while (len>>1) {
*(u16 *)data =
le16_to_cpu(readw(hc->pci_membase + A_FIFO_DATA0));
data += 2;
len -= 2;
}
while (len) {
*data = readb(hc->pci_membase + A_FIFO_DATA0);
data++;
len--;
}
}
static void
enable_hwirq(struct hfc_multi *hc)
{
hc->hw.r_irq_ctrl |= V_GLOB_IRQ_EN;
HFC_outb(hc, R_IRQ_CTRL, hc->hw.r_irq_ctrl);
}
static void
disable_hwirq(struct hfc_multi *hc)
{
hc->hw.r_irq_ctrl &= ~((u_char)V_GLOB_IRQ_EN);
HFC_outb(hc, R_IRQ_CTRL, hc->hw.r_irq_ctrl);
}
#define NUM_EC 2
#define MAX_TDM_CHAN 32
inline void
enablepcibridge(struct hfc_multi *c)
{
HFC_outb(c, R_BRG_PCM_CFG, (0x0 << 6) | 0x3); /* was _io before */
}
inline void
disablepcibridge(struct hfc_multi *c)
{
HFC_outb(c, R_BRG_PCM_CFG, (0x0 << 6) | 0x2); /* was _io before */
}
inline unsigned char
readpcibridge(struct hfc_multi *hc, unsigned char address)
{
unsigned short cipv;
unsigned char data;
if (!hc->pci_iobase)
return 0;
/* slow down a PCI read access by 1 PCI clock cycle */
HFC_outb(hc, R_CTRL, 0x4); /*was _io before*/
if (address == 0)
cipv = 0x4000;
else
cipv = 0x5800;
/* select local bridge port address by writing to CIP port */
/* data = HFC_inb(c, cipv); * was _io before */
outw(cipv, hc->pci_iobase + 4);
data = inb(hc->pci_iobase);
/* restore R_CTRL for normal PCI read cycle speed */
HFC_outb(hc, R_CTRL, 0x0); /* was _io before */
return data;
}
inline void
writepcibridge(struct hfc_multi *hc, unsigned char address, unsigned char data)
{
unsigned short cipv;
unsigned int datav;
if (!hc->pci_iobase)
return;
if (address == 0)
cipv = 0x4000;
else
cipv = 0x5800;
/* select local bridge port address by writing to CIP port */
outw(cipv, hc->pci_iobase + 4);
/* define a 32 bit dword with 4 identical bytes for write sequence */
datav = data | ((__u32) data << 8) | ((__u32) data << 16) |
((__u32) data << 24);
/*
* write this 32 bit dword to the bridge data port
* this will initiate a write sequence of up to 4 writes to the same
* address on the local bus interface the number of write accesses
* is undefined but >=1 and depends on the next PCI transaction
* during write sequence on the local bus
*/
outl(datav, hc->pci_iobase);
}
inline void
cpld_set_reg(struct hfc_multi *hc, unsigned char reg)
{
/* Do data pin read low byte */
HFC_outb(hc, R_GPIO_OUT1, reg);
}
inline void
cpld_write_reg(struct hfc_multi *hc, unsigned char reg, unsigned char val)
{
cpld_set_reg(hc, reg);
enablepcibridge(hc);
writepcibridge(hc, 1, val);
disablepcibridge(hc);
return;
}
inline unsigned char
cpld_read_reg(struct hfc_multi *hc, unsigned char reg)
{
unsigned char bytein;
cpld_set_reg(hc, reg);
/* Do data pin read low byte */
HFC_outb(hc, R_GPIO_OUT1, reg);
enablepcibridge(hc);
bytein = readpcibridge(hc, 1);
disablepcibridge(hc);
return bytein;
}
inline void
vpm_write_address(struct hfc_multi *hc, unsigned short addr)
{
cpld_write_reg(hc, 0, 0xff & addr);
cpld_write_reg(hc, 1, 0x01 & (addr >> 8));
}
inline unsigned short
vpm_read_address(struct hfc_multi *c)
{
unsigned short addr;
unsigned short highbit;
addr = cpld_read_reg(c, 0);
highbit = cpld_read_reg(c, 1);
addr = addr | (highbit << 8);
return addr & 0x1ff;
}
inline unsigned char
vpm_in(struct hfc_multi *c, int which, unsigned short addr)
{
unsigned char res;
vpm_write_address(c, addr);
if (!which)
cpld_set_reg(c, 2);
else
cpld_set_reg(c, 3);
enablepcibridge(c);
res = readpcibridge(c, 1);
disablepcibridge(c);
cpld_set_reg(c, 0);
return res;
}
inline void
vpm_out(struct hfc_multi *c, int which, unsigned short addr,
unsigned char data)
{
vpm_write_address(c, addr);
enablepcibridge(c);
if (!which)
cpld_set_reg(c, 2);
else
cpld_set_reg(c, 3);
writepcibridge(c, 1, data);
cpld_set_reg(c, 0);
disablepcibridge(c);
{
unsigned char regin;
regin = vpm_in(c, which, addr);
if (regin != data)
printk(KERN_DEBUG "Wrote 0x%x to register 0x%x but got back "
"0x%x\n", data, addr, regin);
}
}
static void
vpm_init(struct hfc_multi *wc)
{
unsigned char reg;
unsigned int mask;
unsigned int i, x, y;
unsigned int ver;
for (x = 0; x < NUM_EC; x++) {
/* Setup GPIO's */
if (!x) {
ver = vpm_in(wc, x, 0x1a0);
printk(KERN_DEBUG "VPM: Chip %d: ver %02x\n", x, ver);
}
for (y = 0; y < 4; y++) {
vpm_out(wc, x, 0x1a8 + y, 0x00); /* GPIO out */
vpm_out(wc, x, 0x1ac + y, 0x00); /* GPIO dir */
vpm_out(wc, x, 0x1b0 + y, 0x00); /* GPIO sel */
}
/* Setup TDM path - sets fsync and tdm_clk as inputs */
reg = vpm_in(wc, x, 0x1a3); /* misc_con */
vpm_out(wc, x, 0x1a3, reg & ~2);
/* Setup Echo length (256 taps) */
vpm_out(wc, x, 0x022, 1);
vpm_out(wc, x, 0x023, 0xff);
/* Setup timeslots */
vpm_out(wc, x, 0x02f, 0x00);
mask = 0x02020202 << (x * 4);
/* Setup the tdm channel masks for all chips */
for (i = 0; i < 4; i++)
vpm_out(wc, x, 0x33 - i, (mask >> (i << 3)) & 0xff);
/* Setup convergence rate */
printk(KERN_DEBUG "VPM: A-law mode\n");
reg = 0x00 | 0x10 | 0x01;
vpm_out(wc, x, 0x20, reg);
printk(KERN_DEBUG "VPM reg 0x20 is %x\n", reg);
/*vpm_out(wc, x, 0x20, (0x00 | 0x08 | 0x20 | 0x10)); */
vpm_out(wc, x, 0x24, 0x02);
reg = vpm_in(wc, x, 0x24);
printk(KERN_DEBUG "NLP Thresh is set to %d (0x%x)\n", reg, reg);
/* Initialize echo cans */
for (i = 0; i < MAX_TDM_CHAN; i++) {
if (mask & (0x00000001 << i))
vpm_out(wc, x, i, 0x00);
}
/*
* ARM arch at least disallows a udelay of
* more than 2ms... it gives a fake "__bad_udelay"
* reference at link-time.
* long delays in kernel code are pretty sucky anyway
* for now work around it using 5 x 2ms instead of 1 x 10ms
*/
udelay(2000);
udelay(2000);
udelay(2000);
udelay(2000);
udelay(2000);
/* Put in bypass mode */
for (i = 0; i < MAX_TDM_CHAN; i++) {
if (mask & (0x00000001 << i))
vpm_out(wc, x, i, 0x01);
}
/* Enable bypass */
for (i = 0; i < MAX_TDM_CHAN; i++) {
if (mask & (0x00000001 << i))
vpm_out(wc, x, 0x78 + i, 0x01);
}
}
}
#ifdef UNUSED
static void
vpm_check(struct hfc_multi *hctmp)
{
unsigned char gpi2;
gpi2 = HFC_inb(hctmp, R_GPI_IN2);
if ((gpi2 & 0x3) != 0x3)
printk(KERN_DEBUG "Got interrupt 0x%x from VPM!\n", gpi2);
}
#endif /* UNUSED */
/*
* Interface to enable/disable the HW Echocan
*
* these functions are called within a spin_lock_irqsave on
* the channel instance lock, so we are not disturbed by irqs
*
* we can later easily change the interface to make other
* things configurable, for now we configure the taps
*
*/
static void
vpm_echocan_on(struct hfc_multi *hc, int ch, int taps)
{
unsigned int timeslot;
unsigned int unit;
struct bchannel *bch = hc->chan[ch].bch;
#ifdef TXADJ
int txadj = -4;
struct sk_buff *skb;
#endif
if (hc->chan[ch].protocol != ISDN_P_B_RAW)
return;
if (!bch)
return;
#ifdef TXADJ
skb = _alloc_mISDN_skb(PH_CONTROL_IND, HFC_VOL_CHANGE_TX,
sizeof(int), &txadj, GFP_ATOMIC);
if (skb)
recv_Bchannel_skb(bch, skb);
#endif
timeslot = ((ch/4)*8) + ((ch%4)*4) + 1;
unit = ch % 4;
printk(KERN_NOTICE "vpm_echocan_on called taps [%d] on timeslot %d\n",
taps, timeslot);
vpm_out(hc, unit, timeslot, 0x7e);
}
static void
vpm_echocan_off(struct hfc_multi *hc, int ch)
{
unsigned int timeslot;
unsigned int unit;
struct bchannel *bch = hc->chan[ch].bch;
#ifdef TXADJ
int txadj = 0;
struct sk_buff *skb;
#endif
if (hc->chan[ch].protocol != ISDN_P_B_RAW)
return;
if (!bch)
return;
#ifdef TXADJ
skb = _alloc_mISDN_skb(PH_CONTROL_IND, HFC_VOL_CHANGE_TX,
sizeof(int), &txadj, GFP_ATOMIC);
if (skb)
recv_Bchannel_skb(bch, skb);
#endif
timeslot = ((ch/4)*8) + ((ch%4)*4) + 1;
unit = ch % 4;
printk(KERN_NOTICE "vpm_echocan_off called on timeslot %d\n",
timeslot);
/* FILLME */
vpm_out(hc, unit, timeslot, 0x01);
}
/*
* Speech Design resync feature
* NOTE: This is called sometimes outside interrupt handler.
* We must lock irqsave, so no other interrupt (other card) will occurr!
* Also multiple interrupts may nest, so must lock each access (lists, card)!
*/
static inline void
hfcmulti_resync(struct hfc_multi *locked, struct hfc_multi *newmaster, int rm)
{
struct hfc_multi *hc, *next, *pcmmaster = NULL;
void __iomem *plx_acc_32;
u_int pv;
u_long flags;
spin_lock_irqsave(&HFClock, flags);
spin_lock(&plx_lock); /* must be locked inside other locks */
if (debug & DEBUG_HFCMULTI_PLXSD)
printk(KERN_DEBUG "%s: RESYNC(syncmaster=0x%p)\n",
__func__, syncmaster);
/* select new master */
if (newmaster) {
if (debug & DEBUG_HFCMULTI_PLXSD)
printk(KERN_DEBUG "using provided controller\n");
} else {
list_for_each_entry_safe(hc, next, &HFClist, list) {
if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
if (hc->syncronized) {
newmaster = hc;
break;
}
}
}
}
/* Disable sync of all cards */
list_for_each_entry_safe(hc, next, &HFClist, list) {
if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
plx_acc_32 = hc->plx_membase + PLX_GPIOC;
pv = readl(plx_acc_32);
pv &= ~PLX_SYNC_O_EN;
writel(pv, plx_acc_32);
if (test_bit(HFC_CHIP_PCM_MASTER, &hc->chip)) {
pcmmaster = hc;
if (hc->type == 1) {
if (debug & DEBUG_HFCMULTI_PLXSD)
printk(KERN_DEBUG
"Schedule SYNC_I\n");
hc->e1_resync |= 1; /* get SYNC_I */
}
}
}
}
if (newmaster) {
hc = newmaster;
if (debug & DEBUG_HFCMULTI_PLXSD)
printk(KERN_DEBUG "id=%d (0x%p) = syncronized with "
"interface.\n", hc->id, hc);
/* Enable new sync master */
plx_acc_32 = hc->plx_membase + PLX_GPIOC;
pv = readl(plx_acc_32);
pv |= PLX_SYNC_O_EN;
writel(pv, plx_acc_32);
/* switch to jatt PLL, if not disabled by RX_SYNC */
if (hc->type == 1 && !test_bit(HFC_CHIP_RX_SYNC, &hc->chip)) {
if (debug & DEBUG_HFCMULTI_PLXSD)
printk(KERN_DEBUG "Schedule jatt PLL\n");
hc->e1_resync |= 2; /* switch to jatt */
}
} else {
if (pcmmaster) {
hc = pcmmaster;
if (debug & DEBUG_HFCMULTI_PLXSD)
printk(KERN_DEBUG
"id=%d (0x%p) = PCM master syncronized "
"with QUARTZ\n", hc->id, hc);
if (hc->type == 1) {
/* Use the crystal clock for the PCM
master card */
if (debug & DEBUG_HFCMULTI_PLXSD)
printk(KERN_DEBUG
"Schedule QUARTZ for HFC-E1\n");
hc->e1_resync |= 4; /* switch quartz */
} else {
if (debug & DEBUG_HFCMULTI_PLXSD)
printk(KERN_DEBUG
"QUARTZ is automatically "
"enabled by HFC-%dS\n", hc->type);
}
plx_acc_32 = hc->plx_membase + PLX_GPIOC;
pv = readl(plx_acc_32);
pv |= PLX_SYNC_O_EN;
writel(pv, plx_acc_32);
} else
if (!rm)
printk(KERN_ERR "%s no pcm master, this MUST "
"not happen!\n", __func__);
}
syncmaster = newmaster;
spin_unlock(&plx_lock);
spin_unlock_irqrestore(&HFClock, flags);
}
/* This must be called AND hc must be locked irqsave!!! */
inline void
plxsd_checksync(struct hfc_multi *hc, int rm)
{
if (hc->syncronized) {
if (syncmaster == NULL) {
if (debug & DEBUG_HFCMULTI_PLXSD)
printk(KERN_WARNING "%s: GOT sync on card %d"
" (id=%d)\n", __func__, hc->id + 1,
hc->id);
hfcmulti_resync(hc, hc, rm);
}
} else {
if (syncmaster == hc) {
if (debug & DEBUG_HFCMULTI_PLXSD)
printk(KERN_WARNING "%s: LOST sync on card %d"
" (id=%d)\n", __func__, hc->id + 1,
hc->id);
hfcmulti_resync(hc, NULL, rm);
}
}
}
/*
* free hardware resources used by driver
*/
static void
release_io_hfcmulti(struct hfc_multi *hc)
{
void __iomem *plx_acc_32;
u_int pv;
u_long plx_flags;
if (debug & DEBUG_HFCMULTI_INIT)
printk(KERN_DEBUG "%s: entered\n", __func__);
/* soft reset also masks all interrupts */
hc->hw.r_cirm |= V_SRES;
HFC_outb(hc, R_CIRM, hc->hw.r_cirm);
udelay(1000);
hc->hw.r_cirm &= ~V_SRES;
HFC_outb(hc, R_CIRM, hc->hw.r_cirm);
udelay(1000); /* instead of 'wait' that may cause locking */
/* release Speech Design card, if PLX was initialized */
if (test_bit(HFC_CHIP_PLXSD, &hc->chip) && hc->plx_membase) {
if (debug & DEBUG_HFCMULTI_PLXSD)
printk(KERN_DEBUG "%s: release PLXSD card %d\n",
__func__, hc->id + 1);
spin_lock_irqsave(&plx_lock, plx_flags);
plx_acc_32 = hc->plx_membase + PLX_GPIOC;
writel(PLX_GPIOC_INIT, plx_acc_32);
pv = readl(plx_acc_32);
/* Termination off */
pv &= ~PLX_TERM_ON;
/* Disconnect the PCM */
pv |= PLX_SLAVE_EN_N;
pv &= ~PLX_MASTER_EN;
pv &= ~PLX_SYNC_O_EN;
/* Put the DSP in Reset */
pv &= ~PLX_DSP_RES_N;
writel(pv, plx_acc_32);
if (debug & DEBUG_HFCMULTI_INIT)
printk(KERN_WARNING "%s: PCM off: PLX_GPIO=%x\n",
__func__, pv);
spin_unlock_irqrestore(&plx_lock, plx_flags);
}
/* disable memory mapped ports / io ports */
test_and_clear_bit(HFC_CHIP_PLXSD, &hc->chip); /* prevent resync */
pci_write_config_word(hc->pci_dev, PCI_COMMAND, 0);
if (hc->pci_membase)
iounmap(hc->pci_membase);
if (hc->plx_membase)
iounmap(hc->plx_membase);
if (hc->pci_iobase)
release_region(hc->pci_iobase, 8);
if (hc->pci_dev) {
pci_disable_device(hc->pci_dev);
pci_set_drvdata(hc->pci_dev, NULL);
}
if (debug & DEBUG_HFCMULTI_INIT)
printk(KERN_DEBUG "%s: done\n", __func__);
}
/*
* function called to reset the HFC chip. A complete software reset of chip
* and fifos is done. All configuration of the chip is done.
*/
static int
init_chip(struct hfc_multi *hc)
{
u_long flags, val, val2 = 0, rev;
int i, err = 0;
u_char r_conf_en, rval;
void __iomem *plx_acc_32;
u_int pv;
u_long plx_flags, hfc_flags;
int plx_count;
struct hfc_multi *pos, *next, *plx_last_hc;
spin_lock_irqsave(&hc->lock, flags);
/* reset all registers */
memset(&hc->hw, 0, sizeof(struct hfcm_hw));
/* revision check */
if (debug & DEBUG_HFCMULTI_INIT)
printk(KERN_DEBUG "%s: entered\n", __func__);
val = HFC_inb(hc, R_CHIP_ID)>>4;
if (val != 0x8 && val != 0xc && val != 0xe) {
printk(KERN_INFO "HFC_multi: unknown CHIP_ID:%x\n", (u_int)val);
err = -EIO;
goto out;
}
rev = HFC_inb(hc, R_CHIP_RV);
printk(KERN_INFO
"HFC_multi: detected HFC with chip ID=0x%lx revision=%ld%s\n",
val, rev, (rev == 0) ? " (old FIFO handling)" : "");
if (rev == 0) {
test_and_set_bit(HFC_CHIP_REVISION0, &hc->chip);
printk(KERN_WARNING
"HFC_multi: NOTE: Your chip is revision 0, "
"ask Cologne Chip for update. Newer chips "
"have a better FIFO handling. Old chips "
"still work but may have slightly lower "
"HDLC transmit performance.\n");
}
if (rev > 1) {
printk(KERN_WARNING "HFC_multi: WARNING: This driver doesn't "
"consider chip revision = %ld. The chip / "
"bridge may not work.\n", rev);
}
/* set s-ram size */
hc->Flen = 0x10;
hc->Zmin = 0x80;
hc->Zlen = 384;
hc->DTMFbase = 0x1000;
if (test_bit(HFC_CHIP_EXRAM_128, &hc->chip)) {
if (debug & DEBUG_HFCMULTI_INIT)
printk(KERN_DEBUG "%s: changing to 128K extenal RAM\n",
__func__);
hc->hw.r_ctrl |= V_EXT_RAM;
hc->hw.r_ram_sz = 1;
hc->Flen = 0x20;
hc->Zmin = 0xc0;
hc->Zlen = 1856;
hc->DTMFbase = 0x2000;
}
if (test_bit(HFC_CHIP_EXRAM_512, &hc->chip)) {
if (debug & DEBUG_HFCMULTI_INIT)
printk(KERN_DEBUG "%s: changing to 512K extenal RAM\n",
__func__);
hc->hw.r_ctrl |= V_EXT_RAM;
hc->hw.r_ram_sz = 2;
hc->Flen = 0x20;
hc->Zmin = 0xc0;
hc->Zlen = 8000;
hc->DTMFbase = 0x2000;
}
hc->max_trans = poll << 1;
if (hc->max_trans > hc->Zlen)
hc->max_trans = hc->Zlen;
/* Speech Design PLX bridge */
if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
if (debug & DEBUG_HFCMULTI_PLXSD)
printk(KERN_DEBUG "%s: initializing PLXSD card %d\n",
__func__, hc->id + 1);
spin_lock_irqsave(&plx_lock, plx_flags);
plx_acc_32 = hc->plx_membase + PLX_GPIOC;
writel(PLX_GPIOC_INIT, plx_acc_32);
pv = readl(plx_acc_32);
/* The first and the last cards are terminating the PCM bus */
pv |= PLX_TERM_ON; /* hc is currently the last */
/* Disconnect the PCM */
pv |= PLX_SLAVE_EN_N;
pv &= ~PLX_MASTER_EN;
pv &= ~PLX_SYNC_O_EN;
/* Put the DSP in Reset */
pv &= ~PLX_DSP_RES_N;
writel(pv, plx_acc_32);
spin_unlock_irqrestore(&plx_lock, plx_flags);
if (debug & DEBUG_HFCMULTI_INIT)
printk(KERN_WARNING "%s: slave/term: PLX_GPIO=%x\n",
__func__, pv);
/*
* If we are the 3rd PLXSD card or higher, we must turn
* termination of last PLXSD card off.
*/
spin_lock_irqsave(&HFClock, hfc_flags);
plx_count = 0;
plx_last_hc = NULL;
list_for_each_entry_safe(pos, next, &HFClist, list) {
if (test_bit(HFC_CHIP_PLXSD, &pos->chip)) {
plx_count++;
if (pos != hc)
plx_last_hc = pos;
}
}
if (plx_count >= 3) {
if (debug & DEBUG_HFCMULTI_PLXSD)
printk(KERN_DEBUG "%s: card %d is between, so "
"we disable termination\n",
__func__, plx_last_hc->id + 1);
spin_lock_irqsave(&plx_lock, plx_flags);
plx_acc_32 = plx_last_hc->plx_membase + PLX_GPIOC;
pv = readl(plx_acc_32);
pv &= ~PLX_TERM_ON;
writel(pv, plx_acc_32);
spin_unlock_irqrestore(&plx_lock, plx_flags);
if (debug & DEBUG_HFCMULTI_INIT)
printk(KERN_WARNING "%s: term off: PLX_GPIO=%x\n",
__func__, pv);
}
spin_unlock_irqrestore(&HFClock, hfc_flags);
hc->hw.r_pcm_md0 = V_F0_LEN; /* shift clock for DSP */
}
/* we only want the real Z2 read-pointer for revision > 0 */
if (!test_bit(HFC_CHIP_REVISION0, &hc->chip))
hc->hw.r_ram_sz |= V_FZ_MD;
/* select pcm mode */
if (test_bit(HFC_CHIP_PCM_SLAVE, &hc->chip)) {
if (debug & DEBUG_HFCMULTI_INIT)
printk(KERN_DEBUG "%s: setting PCM into slave mode\n",
__func__);
} else
if (test_bit(HFC_CHIP_PCM_MASTER, &hc->chip) && !plxsd_master) {
if (debug & DEBUG_HFCMULTI_INIT)
printk(KERN_DEBUG "%s: setting PCM into master mode\n",
__func__);
hc->hw.r_pcm_md0 |= V_PCM_MD;
} else {
if (debug & DEBUG_HFCMULTI_INIT)
printk(KERN_DEBUG "%s: performing PCM auto detect\n",
__func__);
}
/* soft reset */
HFC_outb(hc, R_CTRL, hc->hw.r_ctrl);
HFC_outb(hc, R_RAM_SZ, hc->hw.r_ram_sz);
HFC_outb(hc, R_FIFO_MD, 0);
hc->hw.r_cirm = V_SRES | V_HFCRES | V_PCMRES | V_STRES | V_RLD_EPR;
HFC_outb(hc, R_CIRM, hc->hw.r_cirm);
udelay(100);
hc->hw.r_cirm = 0;
HFC_outb(hc, R_CIRM, hc->hw.r_cirm);
udelay(100);
HFC_outb(hc, R_RAM_SZ, hc->hw.r_ram_sz);
/* Speech Design PLX bridge pcm and sync mode */
if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
spin_lock_irqsave(&plx_lock, plx_flags);
plx_acc_32 = hc->plx_membase + PLX_GPIOC;
pv = readl(plx_acc_32);
/* Connect PCM */
if (hc->hw.r_pcm_md0 & V_PCM_MD) {
pv |= PLX_MASTER_EN | PLX_SLAVE_EN_N;
pv |= PLX_SYNC_O_EN;
if (debug & DEBUG_HFCMULTI_INIT)
printk(KERN_WARNING "%s: master: PLX_GPIO=%x\n",
__func__, pv);
} else {
pv &= ~(PLX_MASTER_EN | PLX_SLAVE_EN_N);
pv &= ~PLX_SYNC_O_EN;
if (debug & DEBUG_HFCMULTI_INIT)
printk(KERN_WARNING "%s: slave: PLX_GPIO=%x\n",
__func__, pv);
}
writel(pv, plx_acc_32);
spin_unlock_irqrestore(&plx_lock, plx_flags);
}
/* PCM setup */
HFC_outb(hc, R_PCM_MD0, hc->hw.r_pcm_md0 | 0x90);
if (hc->slots == 32)
HFC_outb(hc, R_PCM_MD1, 0x00);
if (hc->slots == 64)
HFC_outb(hc, R_PCM_MD1, 0x10);
if (hc->slots == 128)
HFC_outb(hc, R_PCM_MD1, 0x20);
HFC_outb(hc, R_PCM_MD0, hc->hw.r_pcm_md0 | 0xa0);
if (test_bit(HFC_CHIP_PLXSD, &hc->chip))
HFC_outb(hc, R_PCM_MD2, V_SYNC_SRC); /* sync via SYNC_I / O */
else
HFC_outb(hc, R_PCM_MD2, 0x00); /* sync from interface */
HFC_outb(hc, R_PCM_MD0, hc->hw.r_pcm_md0 | 0x00);
for (i = 0; i < 256; i++) {
HFC_outb_nodebug(hc, R_SLOT, i);
HFC_outb_nodebug(hc, A_SL_CFG, 0);
HFC_outb_nodebug(hc, A_CONF, 0);
hc->slot_owner[i] = -1;
}
/* set clock speed */
if (test_bit(HFC_CHIP_CLOCK2, &hc->chip)) {
if (debug & DEBUG_HFCMULTI_INIT)
printk(KERN_DEBUG
"%s: setting double clock\n", __func__);
HFC_outb(hc, R_BRG_PCM_CFG, V_PCM_CLK);
}
/* B410P GPIO */
if (test_bit(HFC_CHIP_B410P, &hc->chip)) {
printk(KERN_NOTICE "Setting GPIOs\n");
HFC_outb(hc, R_GPIO_SEL, 0x30);
HFC_outb(hc, R_GPIO_EN1, 0x3);
udelay(1000);
printk(KERN_NOTICE "calling vpm_init\n");
vpm_init(hc);
}
/* check if R_F0_CNT counts (8 kHz frame count) */
val = HFC_inb(hc, R_F0_CNTL);
val += HFC_inb(hc, R_F0_CNTH) << 8;
if (debug & DEBUG_HFCMULTI_INIT)
printk(KERN_DEBUG
"HFC_multi F0_CNT %ld after reset\n", val);
spin_unlock_irqrestore(&hc->lock, flags);
set_current_state(TASK_UNINTERRUPTIBLE);
schedule_timeout((HZ/100)?:1); /* Timeout minimum 10ms */
spin_lock_irqsave(&hc->lock, flags);
val2 = HFC_inb(hc, R_F0_CNTL);
val2 += HFC_inb(hc, R_F0_CNTH) << 8;
if (debug & DEBUG_HFCMULTI_INIT)
printk(KERN_DEBUG
"HFC_multi F0_CNT %ld after 10 ms (1st try)\n",
val2);
if (val2 >= val+8) { /* 1 ms */
/* it counts, so we keep the pcm mode */
if (test_bit(HFC_CHIP_PCM_MASTER, &hc->chip))
printk(KERN_INFO "controller is PCM bus MASTER\n");
else
if (test_bit(HFC_CHIP_PCM_SLAVE, &hc->chip))
printk(KERN_INFO "controller is PCM bus SLAVE\n");
else {
test_and_set_bit(HFC_CHIP_PCM_SLAVE, &hc->chip);
printk(KERN_INFO "controller is PCM bus SLAVE "
"(auto detected)\n");
}
} else {
/* does not count */
if (test_bit(HFC_CHIP_PCM_MASTER, &hc->chip)) {
controller_fail:
printk(KERN_ERR "HFC_multi ERROR, getting no 125us "
"pulse. Seems that controller fails.\n");
err = -EIO;
goto out;
}
if (test_bit(HFC_CHIP_PCM_SLAVE, &hc->chip)) {
printk(KERN_INFO "controller is PCM bus SLAVE "
"(ignoring missing PCM clock)\n");
} else {
/* only one pcm master */
if (test_bit(HFC_CHIP_PLXSD, &hc->chip)
&& plxsd_master) {
printk(KERN_ERR "HFC_multi ERROR, no clock "
"on another Speech Design card found. "
"Please be sure to connect PCM cable.\n");
err = -EIO;
goto out;
}
/* retry with master clock */
if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
spin_lock_irqsave(&plx_lock, plx_flags);
plx_acc_32 = hc->plx_membase + PLX_GPIOC;
pv = readl(plx_acc_32);
pv |= PLX_MASTER_EN | PLX_SLAVE_EN_N;
pv |= PLX_SYNC_O_EN;
writel(pv, plx_acc_32);
spin_unlock_irqrestore(&plx_lock, plx_flags);
if (debug & DEBUG_HFCMULTI_INIT)
printk(KERN_WARNING "%s: master: PLX_GPIO"
"=%x\n", __func__, pv);
}
hc->hw.r_pcm_md0 |= V_PCM_MD;
HFC_outb(hc, R_PCM_MD0, hc->hw.r_pcm_md0 | 0x00);
spin_unlock_irqrestore(&hc->lock, flags);
set_current_state(TASK_UNINTERRUPTIBLE);
schedule_timeout((HZ/100)?:1); /* Timeout min. 10ms */
spin_lock_irqsave(&hc->lock, flags);
val2 = HFC_inb(hc, R_F0_CNTL);
val2 += HFC_inb(hc, R_F0_CNTH) << 8;
if (debug & DEBUG_HFCMULTI_INIT)
printk(KERN_DEBUG "HFC_multi F0_CNT %ld after "
"10 ms (2nd try)\n", val2);
if (val2 >= val+8) { /* 1 ms */
test_and_set_bit(HFC_CHIP_PCM_MASTER,
&hc->chip);
printk(KERN_INFO "controller is PCM bus MASTER "
"(auto detected)\n");
} else
goto controller_fail;
}
}
/* Release the DSP Reset */
if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
if (test_bit(HFC_CHIP_PCM_MASTER, &hc->chip))
plxsd_master = 1;
spin_lock_irqsave(&plx_lock, plx_flags);
plx_acc_32 = hc->plx_membase + PLX_GPIOC;
pv = readl(plx_acc_32);
pv |= PLX_DSP_RES_N;
writel(pv, plx_acc_32);
spin_unlock_irqrestore(&plx_lock, plx_flags);
if (debug & DEBUG_HFCMULTI_INIT)
printk(KERN_WARNING "%s: reset off: PLX_GPIO=%x\n",
__func__, pv);
}
/* pcm id */
if (hc->pcm)
printk(KERN_INFO "controller has given PCM BUS ID %d\n",
hc->pcm);
else {
if (test_bit(HFC_CHIP_PCM_MASTER, &hc->chip)
|| test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
PCM_cnt++; /* SD has proprietary bridging */
}
hc->pcm = PCM_cnt;
printk(KERN_INFO "controller has PCM BUS ID %d "
"(auto selected)\n", hc->pcm);
}
/* set up timer */
HFC_outb(hc, R_TI_WD, poll_timer);
hc->hw.r_irqmsk_misc |= V_TI_IRQMSK;
/* set E1 state machine IRQ */
if (hc->type == 1)
hc->hw.r_irqmsk_misc |= V_STA_IRQMSK;
/* set DTMF detection */
if (test_bit(HFC_CHIP_DTMF, &hc->chip)) {
if (debug & DEBUG_HFCMULTI_INIT)
printk(KERN_DEBUG "%s: enabling DTMF detection "
"for all B-channel\n", __func__);
hc->hw.r_dtmf = V_DTMF_EN | V_DTMF_STOP;
if (test_bit(HFC_CHIP_ULAW, &hc->chip))
hc->hw.r_dtmf |= V_ULAW_SEL;
HFC_outb(hc, R_DTMF_N, 102 - 1);
hc->hw.r_irqmsk_misc |= V_DTMF_IRQMSK;
}
/* conference engine */
if (test_bit(HFC_CHIP_ULAW, &hc->chip))
r_conf_en = V_CONF_EN | V_ULAW;
else
r_conf_en = V_CONF_EN;
HFC_outb(hc, R_CONF_EN, r_conf_en);
/* setting leds */
switch (hc->leds) {
case 1: /* HFC-E1 OEM */
if (test_bit(HFC_CHIP_WATCHDOG, &hc->chip))
HFC_outb(hc, R_GPIO_SEL, 0x32);
else
HFC_outb(hc, R_GPIO_SEL, 0x30);
HFC_outb(hc, R_GPIO_EN1, 0x0f);
HFC_outb(hc, R_GPIO_OUT1, 0x00);
HFC_outb(hc, R_GPIO_EN0, V_GPIO_EN2 | V_GPIO_EN3);
break;
case 2: /* HFC-4S OEM */
case 3:
HFC_outb(hc, R_GPIO_SEL, 0xf0);
HFC_outb(hc, R_GPIO_EN1, 0xff);
HFC_outb(hc, R_GPIO_OUT1, 0x00);
break;
}
/* set master clock */
if (hc->masterclk >= 0) {
if (debug & DEBUG_HFCMULTI_INIT)
printk(KERN_DEBUG "%s: setting ST master clock "
"to port %d (0..%d)\n",
__func__, hc->masterclk, hc->ports-1);
hc->hw.r_st_sync = hc->masterclk | V_AUTO_SYNC;
HFC_outb(hc, R_ST_SYNC, hc->hw.r_st_sync);
}
/* setting misc irq */
HFC_outb(hc, R_IRQMSK_MISC, hc->hw.r_irqmsk_misc);
if (debug & DEBUG_HFCMULTI_INIT)
printk(KERN_DEBUG "r_irqmsk_misc.2: 0x%x\n",
hc->hw.r_irqmsk_misc);
/* RAM access test */
HFC_outb(hc, R_RAM_ADDR0, 0);
HFC_outb(hc, R_RAM_ADDR1, 0);
HFC_outb(hc, R_RAM_ADDR2, 0);
for (i = 0; i < 256; i++) {
HFC_outb_nodebug(hc, R_RAM_ADDR0, i);
HFC_outb_nodebug(hc, R_RAM_DATA, ((i*3)&0xff));
}
for (i = 0; i < 256; i++) {
HFC_outb_nodebug(hc, R_RAM_ADDR0, i);
HFC_inb_nodebug(hc, R_RAM_DATA);
rval = HFC_inb_nodebug(hc, R_INT_DATA);
if (rval != ((i * 3) & 0xff)) {
printk(KERN_DEBUG
"addr:%x val:%x should:%x\n", i, rval,
(i * 3) & 0xff);
err++;
}
}
if (err) {
printk(KERN_DEBUG "aborting - %d RAM access errors\n", err);
err = -EIO;
goto out;
}
if (debug & DEBUG_HFCMULTI_INIT)
printk(KERN_DEBUG "%s: done\n", __func__);
out:
spin_unlock_irqrestore(&hc->lock, flags);
return err;
}
/*
* control the watchdog
*/
static void
hfcmulti_watchdog(struct hfc_multi *hc)
{
hc->wdcount++;
if (hc->wdcount > 10) {
hc->wdcount = 0;
hc->wdbyte = hc->wdbyte == V_GPIO_OUT2 ?
V_GPIO_OUT3 : V_GPIO_OUT2;
/* printk("Sending Watchdog Kill %x\n",hc->wdbyte); */
HFC_outb(hc, R_GPIO_EN0, V_GPIO_EN2 | V_GPIO_EN3);
HFC_outb(hc, R_GPIO_OUT0, hc->wdbyte);
}
}
/*
* output leds
*/
static void
hfcmulti_leds(struct hfc_multi *hc)
{
unsigned long lled;
unsigned long leddw;
int i, state, active, leds;
struct dchannel *dch;
int led[4];
hc->ledcount += poll;
if (hc->ledcount > 4096) {
hc->ledcount -= 4096;
hc->ledstate = 0xAFFEAFFE;
}
switch (hc->leds) {
case 1: /* HFC-E1 OEM */
/* 2 red blinking: NT mode deactivate
* 2 red steady: TE mode deactivate
* left green: L1 active
* left red: frame sync, but no L1
* right green: L2 active
*/
if (hc->chan[hc->dslot].sync != 2) { /* no frame sync */
if (hc->chan[hc->dslot].dch->dev.D.protocol
!= ISDN_P_NT_E1) {
led[0] = 1;
led[1] = 1;
} else if (hc->ledcount>>11) {
led[0] = 1;
led[1] = 1;
} else {
led[0] = 0;
led[1] = 0;
}
led[2] = 0;
led[3] = 0;
} else { /* with frame sync */
/* TODO make it work */
led[0] = 0;
led[1] = 0;
led[2] = 0;
led[3] = 1;
}
leds = (led[0] | (led[1]<<2) | (led[2]<<1) | (led[3]<<3))^0xF;
/* leds are inverted */
if (leds != (int)hc->ledstate) {
HFC_outb_nodebug(hc, R_GPIO_OUT1, leds);
hc->ledstate = leds;
}
break;
case 2: /* HFC-4S OEM */
/* red blinking = PH_DEACTIVATE NT Mode
* red steady = PH_DEACTIVATE TE Mode
* green steady = PH_ACTIVATE
*/
for (i = 0; i < 4; i++) {
state = 0;
active = -1;
dch = hc->chan[(i << 2) | 2].dch;
if (dch) {
state = dch->state;
if (dch->dev.D.protocol == ISDN_P_NT_S0)
active = 3;
else
active = 7;
}
if (state) {
if (state == active) {
led[i] = 1; /* led green */
} else
if (dch->dev.D.protocol == ISDN_P_TE_S0)
/* TE mode: led red */
led[i] = 2;
else
if (hc->ledcount>>11)
/* led red */
led[i] = 2;
else
/* led off */
led[i] = 0;
} else
led[i] = 0; /* led off */
}
if (test_bit(HFC_CHIP_B410P, &hc->chip)) {
leds = 0;
for (i = 0; i < 4; i++) {
if (led[i] == 1) {
/*green*/
leds |= (0x2 << (i * 2));
} else if (led[i] == 2) {
/*red*/
leds |= (0x1 << (i * 2));
}
}
if (leds != (int)hc->ledstate) {
vpm_out(hc, 0, 0x1a8 + 3, leds);
hc->ledstate = leds;
}
} else {
leds = ((led[3] > 0) << 0) | ((led[1] > 0) << 1) |
((led[0] > 0) << 2) | ((led[2] > 0) << 3) |
((led[3] & 1) << 4) | ((led[1] & 1) << 5) |
((led[0] & 1) << 6) | ((led[2] & 1) << 7);
if (leds != (int)hc->ledstate) {
HFC_outb_nodebug(hc, R_GPIO_EN1, leds & 0x0F);
HFC_outb_nodebug(hc, R_GPIO_OUT1, leds >> 4);
hc->ledstate = leds;
}
}
break;
case 3: /* HFC 1S/2S Beronet */
/* red blinking = PH_DEACTIVATE NT Mode
* red steady = PH_DEACTIVATE TE Mode
* green steady = PH_ACTIVATE
*/
for (i = 0; i < 2; i++) {
state = 0;
active = -1;
dch = hc->chan[(i << 2) | 2].dch;
if (dch) {
state = dch->state;
if (dch->dev.D.protocol == ISDN_P_NT_S0)
active = 3;
else
active = 7;
}
if (state) {
if (state == active) {
led[i] = 1; /* led green */
} else
if (dch->dev.D.protocol == ISDN_P_TE_S0)
/* TE mode: led red */
led[i] = 2;
else
if (hc->ledcount >> 11)
/* led red */
led[i] = 2;
else
/* led off */
led[i] = 0;
} else
led[i] = 0; /* led off */
}
leds = (led[0] > 0) | ((led[1] > 0)<<1) | ((led[0]&1)<<2)
| ((led[1]&1)<<3);
if (leds != (int)hc->ledstate) {
HFC_outb_nodebug(hc, R_GPIO_EN1,
((led[0] > 0) << 2) | ((led[1] > 0) << 3));
HFC_outb_nodebug(hc, R_GPIO_OUT1,
((led[0] & 1) << 2) | ((led[1] & 1) << 3));
hc->ledstate = leds;
}
break;
case 8: /* HFC 8S+ Beronet */
lled = 0;
for (i = 0; i < 8; i++) {
state = 0;
active = -1;
dch = hc->chan[(i << 2) | 2].dch;
if (dch) {
state = dch->state;
if (dch->dev.D.protocol == ISDN_P_NT_S0)
active = 3;
else
active = 7;
}
if (state) {
if (state == active) {
lled |= 0 << i;
} else
if (hc->ledcount >> 11)
lled |= 0 << i;
else
lled |= 1 << i;
} else
lled |= 1 << i;
}
leddw = lled << 24 | lled << 16 | lled << 8 | lled;
if (leddw != hc->ledstate) {
/* HFC_outb(hc, R_BRG_PCM_CFG, 1);
HFC_outb(c, R_BRG_PCM_CFG, (0x0 << 6) | 0x3); */
/* was _io before */
HFC_outb_nodebug(hc, R_BRG_PCM_CFG, 1 | V_PCM_CLK);
outw(0x4000, hc->pci_iobase + 4);
outl(leddw, hc->pci_iobase);
HFC_outb_nodebug(hc, R_BRG_PCM_CFG, V_PCM_CLK);
hc->ledstate = leddw;
}
break;
}
}
/*
* read dtmf coefficients
*/
static void
hfcmulti_dtmf(struct hfc_multi *hc)
{
s32 *coeff;
u_int mantissa;
int co, ch;
struct bchannel *bch = NULL;
u8 exponent;
int dtmf = 0;
int addr;
u16 w_float;
struct sk_buff *skb;
struct mISDNhead *hh;
if (debug & DEBUG_HFCMULTI_DTMF)
printk(KERN_DEBUG "%s: dtmf detection irq\n", __func__);
for (ch = 0; ch <= 31; ch++) {
/* only process enabled B-channels */
bch = hc->chan[ch].bch;
if (!bch)
continue;
if (!hc->created[hc->chan[ch].port])
continue;
if (!test_bit(FLG_TRANSPARENT, &bch->Flags))
continue;
if (debug & DEBUG_HFCMULTI_DTMF)
printk(KERN_DEBUG "%s: dtmf channel %d:",
__func__, ch);
coeff = &(hc->chan[ch].coeff[hc->chan[ch].coeff_count * 16]);
dtmf = 1;
for (co = 0; co < 8; co++) {
/* read W(n-1) coefficient */
addr = hc->DTMFbase + ((co<<7) | (ch<<2));
HFC_outb_nodebug(hc, R_RAM_ADDR0, addr);
HFC_outb_nodebug(hc, R_RAM_ADDR1, addr>>8);
HFC_outb_nodebug(hc, R_RAM_ADDR2, (addr>>16)
| V_ADDR_INC);
w_float = HFC_inb_nodebug(hc, R_RAM_DATA);
w_float |= (HFC_inb_nodebug(hc, R_RAM_DATA) << 8);
if (debug & DEBUG_HFCMULTI_DTMF)
printk(" %04x", w_float);
/* decode float (see chip doc) */
mantissa = w_float & 0x0fff;
if (w_float & 0x8000)
mantissa |= 0xfffff000;
exponent = (w_float>>12) & 0x7;
if (exponent) {
mantissa ^= 0x1000;
mantissa <<= (exponent-1);
}
/* store coefficient */
coeff[co<<1] = mantissa;
/* read W(n) coefficient */
w_float = HFC_inb_nodebug(hc, R_RAM_DATA);
w_float |= (HFC_inb_nodebug(hc, R_RAM_DATA) << 8);
if (debug & DEBUG_HFCMULTI_DTMF)
printk(" %04x", w_float);
/* decode float (see chip doc) */
mantissa = w_float & 0x0fff;
if (w_float & 0x8000)
mantissa |= 0xfffff000;
exponent = (w_float>>12) & 0x7;
if (exponent) {
mantissa ^= 0x1000;
mantissa <<= (exponent-1);
}
/* store coefficient */
coeff[(co<<1)|1] = mantissa;
}
if (debug & DEBUG_HFCMULTI_DTMF)
printk("%s: DTMF ready %08x %08x %08x %08x "
"%08x %08x %08x %08x\n", __func__,
coeff[0], coeff[1], coeff[2], coeff[3],
coeff[4], coeff[5], coeff[6], coeff[7]);
hc->chan[ch].coeff_count++;
if (hc->chan[ch].coeff_count == 8) {
hc->chan[ch].coeff_count = 0;
skb = mI_alloc_skb(512, GFP_ATOMIC);
if (!skb) {
printk(KERN_WARNING "%s: No memory for skb\n",
__func__);
continue;
}
hh = mISDN_HEAD_P(skb);
hh->prim = PH_CONTROL_IND;
hh->id = DTMF_HFC_COEF;
memcpy(skb_put(skb, 512), hc->chan[ch].coeff, 512);
recv_Bchannel_skb(bch, skb);
}
}
/* restart DTMF processing */
hc->dtmf = dtmf;
if (dtmf)
HFC_outb_nodebug(hc, R_DTMF, hc->hw.r_dtmf | V_RST_DTMF);
}
/*
* fill fifo as much as possible
*/
static void
hfcmulti_tx(struct hfc_multi *hc, int ch)
{
int i, ii, temp, len = 0;
int Zspace, z1, z2; /* must be int for calculation */
int Fspace, f1, f2;
u_char *d;
int *txpending, slot_tx;
struct bchannel *bch;
struct dchannel *dch;
struct sk_buff **sp = NULL;
int *idxp;
bch = hc->chan[ch].bch;
dch = hc->chan[ch].dch;
if ((!dch) && (!bch))
return;
txpending = &hc->chan[ch].txpending;
slot_tx = hc->chan[ch].slot_tx;
if (dch) {
if (!test_bit(FLG_ACTIVE, &dch->Flags))
return;
sp = &dch->tx_skb;
idxp = &dch->tx_idx;
} else {
if (!test_bit(FLG_ACTIVE, &bch->Flags))
return;
sp = &bch->tx_skb;
idxp = &bch->tx_idx;
}
if (*sp)
len = (*sp)->len;
if ((!len) && *txpending != 1)
return; /* no data */
if (test_bit(HFC_CHIP_B410P, &hc->chip) &&
(hc->chan[ch].protocol == ISDN_P_B_RAW) &&
(hc->chan[ch].slot_rx < 0) &&
(hc->chan[ch].slot_tx < 0))
HFC_outb_nodebug(hc, R_FIFO, 0x20 | (ch << 1));
else
HFC_outb_nodebug(hc, R_FIFO, ch << 1);
HFC_wait_nodebug(hc);
if (*txpending == 2) {
/* reset fifo */
HFC_outb_nodebug(hc, R_INC_RES_FIFO, V_RES_F);
HFC_wait_nodebug(hc);
HFC_outb(hc, A_SUBCH_CFG, 0);
*txpending = 1;
}
next_frame:
if (dch || test_bit(FLG_HDLC, &bch->Flags)) {
f1 = HFC_inb_nodebug(hc, A_F1);
f2 = HFC_inb_nodebug(hc, A_F2);
while (f2 != (temp = HFC_inb_nodebug(hc, A_F2))) {
if (debug & DEBUG_HFCMULTI_FIFO)
printk(KERN_DEBUG
"%s(card %d): reread f2 because %d!=%d\n",
__func__, hc->id + 1, temp, f2);
f2 = temp; /* repeat until F2 is equal */
}
Fspace = f2 - f1 - 1;
if (Fspace < 0)
Fspace += hc->Flen;
/*
* Old FIFO handling doesn't give us the current Z2 read
* pointer, so we cannot send the next frame before the fifo
* is empty. It makes no difference except for a slightly
* lower performance.
*/
if (test_bit(HFC_CHIP_REVISION0, &hc->chip)) {
if (f1 != f2)
Fspace = 0;
else
Fspace = 1;
}
/* one frame only for ST D-channels, to allow resending */
if (hc->type != 1 && dch) {
if (f1 != f2)
Fspace = 0;
}
/* F-counter full condition */
if (Fspace == 0)
return;
}
z1 = HFC_inw_nodebug(hc, A_Z1) - hc->Zmin;
z2 = HFC_inw_nodebug(hc, A_Z2) - hc->Zmin;
while (z2 != (temp = (HFC_inw_nodebug(hc, A_Z2) - hc->Zmin))) {
if (debug & DEBUG_HFCMULTI_FIFO)
printk(KERN_DEBUG "%s(card %d): reread z2 because "
"%d!=%d\n", __func__, hc->id + 1, temp, z2);
z2 = temp; /* repeat unti Z2 is equal */
}
Zspace = z2 - z1;
if (Zspace <= 0)
Zspace += hc->Zlen;
Zspace -= 4; /* keep not too full, so pointers will not overrun */
/* fill transparent data only to maxinum transparent load (minus 4) */
if (bch && test_bit(FLG_TRANSPARENT, &bch->Flags))
Zspace = Zspace - hc->Zlen + hc->max_trans;
if (Zspace <= 0) /* no space of 4 bytes */
return;
/* if no data */
if (!len) {
if (z1 == z2) { /* empty */
/* if done with FIFO audio data during PCM connection */
if (bch && (!test_bit(FLG_HDLC, &bch->Flags)) &&
*txpending && slot_tx >= 0) {
if (debug & DEBUG_HFCMULTI_MODE)
printk(KERN_DEBUG
"%s: reconnecting PCM due to no "
"more FIFO data: channel %d "
"slot_tx %d\n",
__func__, ch, slot_tx);
/* connect slot */
HFC_outb(hc, A_CON_HDLC, 0xc0 | 0x00 |
V_HDLC_TRP | V_IFF);
HFC_outb_nodebug(hc, R_FIFO, ch<<1 | 1);
HFC_wait_nodebug(hc);
HFC_outb(hc, A_CON_HDLC, 0xc0 | 0x00 |
V_HDLC_TRP | V_IFF);
HFC_outb_nodebug(hc, R_FIFO, ch<<1);
HFC_wait_nodebug(hc);
}
*txpending = 0;
}
return; /* no data */
}
/* "fill fifo if empty" feature */
if (bch && test_bit(FLG_FILLEMPTY, &bch->Flags)
&& !test_bit(FLG_HDLC, &bch->Flags) && z2 == z1) {
if (debug & DEBUG_HFCMULTI_FILL)
printk(KERN_DEBUG "%s: buffer empty, so we have "
"underrun\n", __func__);
/* fill buffer, to prevent future underrun */
hc->write_fifo(hc, hc->silence_data, poll >> 1);
Zspace -= (poll >> 1);
}
/* if audio data and connected slot */
if (bch && (!test_bit(FLG_HDLC, &bch->Flags)) && (!*txpending)
&& slot_tx >= 0) {
if (debug & DEBUG_HFCMULTI_MODE)
printk(KERN_DEBUG "%s: disconnecting PCM due to "
"FIFO data: channel %d slot_tx %d\n",
__func__, ch, slot_tx);
/* disconnect slot */
HFC_outb(hc, A_CON_HDLC, 0x80 | 0x00 | V_HDLC_TRP | V_IFF);
HFC_outb_nodebug(hc, R_FIFO, ch<<1 | 1);
HFC_wait_nodebug(hc);
HFC_outb(hc, A_CON_HDLC, 0x80 | 0x00 | V_HDLC_TRP | V_IFF);
HFC_outb_nodebug(hc, R_FIFO, ch<<1);
HFC_wait_nodebug(hc);
}
*txpending = 1;
/* show activity */
hc->activity[hc->chan[ch].port] = 1;
/* fill fifo to what we have left */
ii = len;
if (dch || test_bit(FLG_HDLC, &bch->Flags))
temp = 1;
else
temp = 0;
i = *idxp;
d = (*sp)->data + i;
if (ii - i > Zspace)
ii = Zspace + i;
if (debug & DEBUG_HFCMULTI_FIFO)
printk(KERN_DEBUG "%s(card %d): fifo(%d) has %d bytes space "
"left (z1=%04x, z2=%04x) sending %d of %d bytes %s\n",
__func__, hc->id + 1, ch, Zspace, z1, z2, ii-i, len-i,
temp ? "HDLC":"TRANS");
/* Have to prep the audio data */
hc->write_fifo(hc, d, ii - i);
*idxp = ii;
/* if not all data has been written */
if (ii != len) {
/* NOTE: fifo is started by the calling function */
return;
}
/* if all data has been written, terminate frame */
if (dch || test_bit(FLG_HDLC, &bch->Flags)) {
/* increment f-counter */
HFC_outb_nodebug(hc, R_INC_RES_FIFO, V_INC_F);
HFC_wait_nodebug(hc);
}
/* send confirm, since get_net_bframe will not do it with trans */
if (bch && test_bit(FLG_TRANSPARENT, &bch->Flags))
confirm_Bsend(bch);
/* check for next frame */
dev_kfree_skb(*sp);
if (bch && get_next_bframe(bch)) { /* hdlc is confirmed here */
len = (*sp)->len;
goto next_frame;
}
if (dch && get_next_dframe(dch)) {
len = (*sp)->len;
goto next_frame;
}
/*
* now we have no more data, so in case of transparent,
* we set the last byte in fifo to 'silence' in case we will get
* no more data at all. this prevents sending an undefined value.
*/
if (bch && test_bit(FLG_TRANSPARENT, &bch->Flags))
HFC_outb_nodebug(hc, A_FIFO_DATA0_NOINC, hc->silence);
}
/* NOTE: only called if E1 card is in active state */
static void
hfcmulti_rx(struct hfc_multi *hc, int ch)
{
int temp;
int Zsize, z1, z2 = 0; /* = 0, to make GCC happy */
int f1 = 0, f2 = 0; /* = 0, to make GCC happy */
int again = 0;
struct bchannel *bch;
struct dchannel *dch;
struct sk_buff *skb, **sp = NULL;
int maxlen;
bch = hc->chan[ch].bch;
dch = hc->chan[ch].dch;
if ((!dch) && (!bch))
return;
if (dch) {
if (!test_bit(FLG_ACTIVE, &dch->Flags))
return;
sp = &dch->rx_skb;
maxlen = dch->maxlen;
} else {
if (!test_bit(FLG_ACTIVE, &bch->Flags))
return;
sp = &bch->rx_skb;
maxlen = bch->maxlen;
}
next_frame:
/* on first AND before getting next valid frame, R_FIFO must be written
to. */
if (test_bit(HFC_CHIP_B410P, &hc->chip) &&
(hc->chan[ch].protocol == ISDN_P_B_RAW) &&
(hc->chan[ch].slot_rx < 0) &&
(hc->chan[ch].slot_tx < 0))
HFC_outb_nodebug(hc, R_FIFO, 0x20 | (ch<<1) | 1);
else
HFC_outb_nodebug(hc, R_FIFO, (ch<<1)|1);
HFC_wait_nodebug(hc);
/* ignore if rx is off BUT change fifo (above) to start pending TX */
if (hc->chan[ch].rx_off)
return;
if (dch || test_bit(FLG_HDLC, &bch->Flags)) {
f1 = HFC_inb_nodebug(hc, A_F1);
while (f1 != (temp = HFC_inb_nodebug(hc, A_F1))) {
if (debug & DEBUG_HFCMULTI_FIFO)
printk(KERN_DEBUG
"%s(card %d): reread f1 because %d!=%d\n",
__func__, hc->id + 1, temp, f1);
f1 = temp; /* repeat until F1 is equal */
}
f2 = HFC_inb_nodebug(hc, A_F2);
}
z1 = HFC_inw_nodebug(hc, A_Z1) - hc->Zmin;
while (z1 != (temp = (HFC_inw_nodebug(hc, A_Z1) - hc->Zmin))) {
if (debug & DEBUG_HFCMULTI_FIFO)
printk(KERN_DEBUG "%s(card %d): reread z2 because "
"%d!=%d\n", __func__, hc->id + 1, temp, z2);
z1 = temp; /* repeat until Z1 is equal */
}
z2 = HFC_inw_nodebug(hc, A_Z2) - hc->Zmin;
Zsize = z1 - z2;
if ((dch || test_bit(FLG_HDLC, &bch->Flags)) && f1 != f2)
/* complete hdlc frame */
Zsize++;
if (Zsize < 0)
Zsize += hc->Zlen;
/* if buffer is empty */
if (Zsize <= 0)
return;
if (*sp == NULL) {
*sp = mI_alloc_skb(maxlen + 3, GFP_ATOMIC);
if (*sp == NULL) {
printk(KERN_DEBUG "%s: No mem for rx_skb\n",
__func__);
return;
}
}
/* show activity */
hc->activity[hc->chan[ch].port] = 1;
/* empty fifo with what we have */
if (dch || test_bit(FLG_HDLC, &bch->Flags)) {
if (debug & DEBUG_HFCMULTI_FIFO)
printk(KERN_DEBUG "%s(card %d): fifo(%d) reading %d "
"bytes (z1=%04x, z2=%04x) HDLC %s (f1=%d, f2=%d) "
"got=%d (again %d)\n", __func__, hc->id + 1, ch,
Zsize, z1, z2, (f1 == f2) ? "fragment" : "COMPLETE",
f1, f2, Zsize + (*sp)->len, again);
/* HDLC */
if ((Zsize + (*sp)->len) > (maxlen + 3)) {
if (debug & DEBUG_HFCMULTI_FIFO)
printk(KERN_DEBUG
"%s(card %d): hdlc-frame too large.\n",
__func__, hc->id + 1);
skb_trim(*sp, 0);
HFC_outb_nodebug(hc, R_INC_RES_FIFO, V_RES_F);
HFC_wait_nodebug(hc);
return;
}
hc->read_fifo(hc, skb_put(*sp, Zsize), Zsize);
if (f1 != f2) {
/* increment Z2,F2-counter */
HFC_outb_nodebug(hc, R_INC_RES_FIFO, V_INC_F);
HFC_wait_nodebug(hc);
/* check size */
if ((*sp)->len < 4) {
if (debug & DEBUG_HFCMULTI_FIFO)
printk(KERN_DEBUG
"%s(card %d): Frame below minimum "
"size\n", __func__, hc->id + 1);
skb_trim(*sp, 0);
goto next_frame;
}
/* there is at least one complete frame, check crc */
if ((*sp)->data[(*sp)->len - 1]) {
if (debug & DEBUG_HFCMULTI_CRC)
printk(KERN_DEBUG
"%s: CRC-error\n", __func__);
skb_trim(*sp, 0);
goto next_frame;
}
skb_trim(*sp, (*sp)->len - 3);
if ((*sp)->len < MISDN_COPY_SIZE) {
skb = *sp;
*sp = mI_alloc_skb(skb->len, GFP_ATOMIC);
if (*sp) {
memcpy(skb_put(*sp, skb->len),
skb->data, skb->len);
skb_trim(skb, 0);
} else {
printk(KERN_DEBUG "%s: No mem\n",
__func__);
*sp = skb;
skb = NULL;
}
} else {
skb = NULL;
}
if (debug & DEBUG_HFCMULTI_FIFO) {
printk(KERN_DEBUG "%s(card %d):",
__func__, hc->id + 1);
temp = 0;
while (temp < (*sp)->len)
printk(" %02x", (*sp)->data[temp++]);
printk("\n");
}
if (dch)
recv_Dchannel(dch);
else
recv_Bchannel(bch);
*sp = skb;
again++;
goto next_frame;
}
/* there is an incomplete frame */
} else {
/* transparent */
if (Zsize > skb_tailroom(*sp))
Zsize = skb_tailroom(*sp);
hc->read_fifo(hc, skb_put(*sp, Zsize), Zsize);
if (((*sp)->len) < MISDN_COPY_SIZE) {
skb = *sp;
*sp = mI_alloc_skb(skb->len, GFP_ATOMIC);
if (*sp) {
memcpy(skb_put(*sp, skb->len),
skb->data, skb->len);
skb_trim(skb, 0);
} else {
printk(KERN_DEBUG "%s: No mem\n", __func__);
*sp = skb;
skb = NULL;
}
} else {
skb = NULL;
}
if (debug & DEBUG_HFCMULTI_FIFO)
printk(KERN_DEBUG
"%s(card %d): fifo(%d) reading %d bytes "
"(z1=%04x, z2=%04x) TRANS\n",
__func__, hc->id + 1, ch, Zsize, z1, z2);
/* only bch is transparent */
recv_Bchannel(bch);
*sp = skb;
}
}
/*
* Interrupt handler
*/
static void
signal_state_up(struct dchannel *dch, int info, char *msg)
{
struct sk_buff *skb;
int id, data = info;
if (debug & DEBUG_HFCMULTI_STATE)
printk(KERN_DEBUG "%s: %s\n", __func__, msg);
id = TEI_SAPI | (GROUP_TEI << 8); /* manager address */
skb = _alloc_mISDN_skb(MPH_INFORMATION_IND, id, sizeof(data), &data,
GFP_ATOMIC);
if (!skb)
return;
recv_Dchannel_skb(dch, skb);
}
static inline void
handle_timer_irq(struct hfc_multi *hc)
{
int ch, temp;
struct dchannel *dch;
u_long flags;
/* process queued resync jobs */
if (hc->e1_resync) {
/* lock, so e1_resync gets not changed */
spin_lock_irqsave(&HFClock, flags);
if (hc->e1_resync & 1) {
if (debug & DEBUG_HFCMULTI_PLXSD)
printk(KERN_DEBUG "Enable SYNC_I\n");
HFC_outb(hc, R_SYNC_CTRL, V_EXT_CLK_SYNC);
/* disable JATT, if RX_SYNC is set */
if (test_bit(HFC_CHIP_RX_SYNC, &hc->chip))
HFC_outb(hc, R_SYNC_OUT, V_SYNC_E1_RX);
}
if (hc->e1_resync & 2) {
if (debug & DEBUG_HFCMULTI_PLXSD)
printk(KERN_DEBUG "Enable jatt PLL\n");
HFC_outb(hc, R_SYNC_CTRL, V_SYNC_OFFS);
}
if (hc->e1_resync & 4) {
if (debug & DEBUG_HFCMULTI_PLXSD)
printk(KERN_DEBUG
"Enable QUARTZ for HFC-E1\n");
/* set jatt to quartz */
HFC_outb(hc, R_SYNC_CTRL, V_EXT_CLK_SYNC
| V_JATT_OFF);
/* switch to JATT, in case it is not already */
HFC_outb(hc, R_SYNC_OUT, 0);
}
hc->e1_resync = 0;
spin_unlock_irqrestore(&HFClock, flags);
}
if (hc->type != 1 || hc->e1_state == 1)
for (ch = 0; ch <= 31; ch++) {
if (hc->created[hc->chan[ch].port]) {
hfcmulti_tx(hc, ch);
/* fifo is started when switching to rx-fifo */
hfcmulti_rx(hc, ch);
if (hc->chan[ch].dch &&
hc->chan[ch].nt_timer > -1) {
dch = hc->chan[ch].dch;
if (!(--hc->chan[ch].nt_timer)) {
schedule_event(dch,
FLG_PHCHANGE);
if (debug &
DEBUG_HFCMULTI_STATE)
printk(KERN_DEBUG
"%s: nt_timer at "
"state %x\n",
__func__,
dch->state);
}
}
}
}
if (hc->type == 1 && hc->created[0]) {
dch = hc->chan[hc->dslot].dch;
if (test_bit(HFC_CFG_REPORT_LOS, &hc->chan[hc->dslot].cfg)) {
/* LOS */
temp = HFC_inb_nodebug(hc, R_SYNC_STA) & V_SIG_LOS;
if (!temp && hc->chan[hc->dslot].los)
signal_state_up(dch, L1_SIGNAL_LOS_ON,
"LOS detected");
if (temp && !hc->chan[hc->dslot].los)
signal_state_up(dch, L1_SIGNAL_LOS_OFF,
"LOS gone");
hc->chan[hc->dslot].los = temp;
}
if (test_bit(HFC_CFG_REPORT_AIS, &hc->chan[hc->dslot].cfg)) {
/* AIS */
temp = HFC_inb_nodebug(hc, R_SYNC_STA) & V_AIS;
if (!temp && hc->chan[hc->dslot].ais)
signal_state_up(dch, L1_SIGNAL_AIS_ON,
"AIS detected");
if (temp && !hc->chan[hc->dslot].ais)
signal_state_up(dch, L1_SIGNAL_AIS_OFF,
"AIS gone");
hc->chan[hc->dslot].ais = temp;
}
if (test_bit(HFC_CFG_REPORT_SLIP, &hc->chan[hc->dslot].cfg)) {
/* SLIP */
temp = HFC_inb_nodebug(hc, R_SLIP) & V_FOSLIP_RX;
if (!temp && hc->chan[hc->dslot].slip_rx)
signal_state_up(dch, L1_SIGNAL_SLIP_RX,
" bit SLIP detected RX");
hc->chan[hc->dslot].slip_rx = temp;
temp = HFC_inb_nodebug(hc, R_SLIP) & V_FOSLIP_TX;
if (!temp && hc->chan[hc->dslot].slip_tx)
signal_state_up(dch, L1_SIGNAL_SLIP_TX,
" bit SLIP detected TX");
hc->chan[hc->dslot].slip_tx = temp;
}
if (test_bit(HFC_CFG_REPORT_RDI, &hc->chan[hc->dslot].cfg)) {
/* RDI */
temp = HFC_inb_nodebug(hc, R_RX_SL0_0) & V_A;
if (!temp && hc->chan[hc->dslot].rdi)
signal_state_up(dch, L1_SIGNAL_RDI_ON,
"RDI detected");
if (temp && !hc->chan[hc->dslot].rdi)
signal_state_up(dch, L1_SIGNAL_RDI_OFF,
"RDI gone");
hc->chan[hc->dslot].rdi = temp;
}
temp = HFC_inb_nodebug(hc, R_JATT_DIR);
switch (hc->chan[hc->dslot].sync) {
case 0:
if ((temp & 0x60) == 0x60) {
if (debug & DEBUG_HFCMULTI_SYNC)
printk(KERN_DEBUG
"%s: (id=%d) E1 now "
"in clock sync\n",
__func__, hc->id);
HFC_outb(hc, R_RX_OFF,
hc->chan[hc->dslot].jitter | V_RX_INIT);
HFC_outb(hc, R_TX_OFF,
hc->chan[hc->dslot].jitter | V_RX_INIT);
hc->chan[hc->dslot].sync = 1;
goto check_framesync;
}
break;
case 1:
if ((temp & 0x60) != 0x60) {
if (debug & DEBUG_HFCMULTI_SYNC)
printk(KERN_DEBUG
"%s: (id=%d) E1 "
"lost clock sync\n",
__func__, hc->id);
hc->chan[hc->dslot].sync = 0;
break;
}
check_framesync:
temp = HFC_inb_nodebug(hc, R_SYNC_STA);
if (temp == 0x27) {
if (debug & DEBUG_HFCMULTI_SYNC)
printk(KERN_DEBUG
"%s: (id=%d) E1 "
"now in frame sync\n",
__func__, hc->id);
hc->chan[hc->dslot].sync = 2;
}
break;
case 2:
if ((temp & 0x60) != 0x60) {
if (debug & DEBUG_HFCMULTI_SYNC)
printk(KERN_DEBUG
"%s: (id=%d) E1 lost "
"clock & frame sync\n",
__func__, hc->id);
hc->chan[hc->dslot].sync = 0;
break;
}
temp = HFC_inb_nodebug(hc, R_SYNC_STA);
if (temp != 0x27) {
if (debug & DEBUG_HFCMULTI_SYNC)
printk(KERN_DEBUG
"%s: (id=%d) E1 "
"lost frame sync\n",
__func__, hc->id);
hc->chan[hc->dslot].sync = 1;
}
break;
}
}
if (test_bit(HFC_CHIP_WATCHDOG, &hc->chip))
hfcmulti_watchdog(hc);
if (hc->leds)
hfcmulti_leds(hc);
}
static void
ph_state_irq(struct hfc_multi *hc, u_char r_irq_statech)
{
struct dchannel *dch;
int ch;
int active;
u_char st_status, temp;
/* state machine */
for (ch = 0; ch <= 31; ch++) {
if (hc->chan[ch].dch) {
dch = hc->chan[ch].dch;
if (r_irq_statech & 1) {
HFC_outb_nodebug(hc, R_ST_SEL,
hc->chan[ch].port);
/* undocumented: delay after R_ST_SEL */
udelay(1);
/* undocumented: status changes during read */
st_status = HFC_inb_nodebug(hc, A_ST_RD_STATE);
while (st_status != (temp =
HFC_inb_nodebug(hc, A_ST_RD_STATE))) {
if (debug & DEBUG_HFCMULTI_STATE)
printk(KERN_DEBUG "%s: reread "
"STATE because %d!=%d\n",
__func__, temp,
st_status);
st_status = temp; /* repeat */
}
/* Speech Design TE-sync indication */
if (test_bit(HFC_CHIP_PLXSD, &hc->chip) &&
dch->dev.D.protocol == ISDN_P_TE_S0) {
if (st_status & V_FR_SYNC_ST)
hc->syncronized |=
(1 << hc->chan[ch].port);
else
hc->syncronized &=
~(1 << hc->chan[ch].port);
}
dch->state = st_status & 0x0f;
if (dch->dev.D.protocol == ISDN_P_NT_S0)
active = 3;
else
active = 7;
if (dch->state == active) {
HFC_outb_nodebug(hc, R_FIFO,
(ch << 1) | 1);
HFC_wait_nodebug(hc);
HFC_outb_nodebug(hc,
R_INC_RES_FIFO, V_RES_F);
HFC_wait_nodebug(hc);
dch->tx_idx = 0;
}
schedule_event(dch, FLG_PHCHANGE);
if (debug & DEBUG_HFCMULTI_STATE)
printk(KERN_DEBUG
"%s: S/T newstate %x port %d\n",
__func__, dch->state,
hc->chan[ch].port);
}
r_irq_statech >>= 1;
}
}
if (test_bit(HFC_CHIP_PLXSD, &hc->chip))
plxsd_checksync(hc, 0);
}
static void
fifo_irq(struct hfc_multi *hc, int block)
{
int ch, j;
struct dchannel *dch;
struct bchannel *bch;
u_char r_irq_fifo_bl;
r_irq_fifo_bl = HFC_inb_nodebug(hc, R_IRQ_FIFO_BL0 + block);
j = 0;
while (j < 8) {
ch = (block << 2) + (j >> 1);
dch = hc->chan[ch].dch;
bch = hc->chan[ch].bch;
if (((!dch) && (!bch)) || (!hc->created[hc->chan[ch].port])) {
j += 2;
continue;
}
if (dch && (r_irq_fifo_bl & (1 << j)) &&
test_bit(FLG_ACTIVE, &dch->Flags)) {
hfcmulti_tx(hc, ch);
/* start fifo */
HFC_outb_nodebug(hc, R_FIFO, 0);
HFC_wait_nodebug(hc);
}
if (bch && (r_irq_fifo_bl & (1 << j)) &&
test_bit(FLG_ACTIVE, &bch->Flags)) {
hfcmulti_tx(hc, ch);
/* start fifo */
HFC_outb_nodebug(hc, R_FIFO, 0);
HFC_wait_nodebug(hc);
}
j++;
if (dch && (r_irq_fifo_bl & (1 << j)) &&
test_bit(FLG_ACTIVE, &dch->Flags)) {
hfcmulti_rx(hc, ch);
}
if (bch && (r_irq_fifo_bl & (1 << j)) &&
test_bit(FLG_ACTIVE, &bch->Flags)) {
hfcmulti_rx(hc, ch);
}
j++;
}
}
#ifdef IRQ_DEBUG
int irqsem;
#endif
static irqreturn_t
hfcmulti_interrupt(int intno, void *dev_id)
{
#ifdef IRQCOUNT_DEBUG
static int iq1 = 0, iq2 = 0, iq3 = 0, iq4 = 0,
iq5 = 0, iq6 = 0, iqcnt = 0;
#endif
struct hfc_multi *hc = dev_id;
struct dchannel *dch;
u_char r_irq_statech, status, r_irq_misc, r_irq_oview;
int i;
void __iomem *plx_acc;
u_short wval;
u_char e1_syncsta, temp;
u_long flags;
if (!hc) {
printk(KERN_ERR "HFC-multi: Spurious interrupt!\n");
return IRQ_NONE;
}
spin_lock(&hc->lock);
#ifdef IRQ_DEBUG
if (irqsem)
printk(KERN_ERR "irq for card %d during irq from "
"card %d, this is no bug.\n", hc->id + 1, irqsem);
irqsem = hc->id + 1;
#endif
if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
spin_lock_irqsave(&plx_lock, flags);
plx_acc = hc->plx_membase + PLX_INTCSR;
wval = readw(plx_acc);
spin_unlock_irqrestore(&plx_lock, flags);
if (!(wval & PLX_INTCSR_LINTI1_STATUS))
goto irq_notforus;
}
status = HFC_inb_nodebug(hc, R_STATUS);
r_irq_statech = HFC_inb_nodebug(hc, R_IRQ_STATECH);
#ifdef IRQCOUNT_DEBUG
if (r_irq_statech)
iq1++;
if (status & V_DTMF_STA)
iq2++;
if (status & V_LOST_STA)
iq3++;
if (status & V_EXT_IRQSTA)
iq4++;
if (status & V_MISC_IRQSTA)
iq5++;
if (status & V_FR_IRQSTA)
iq6++;
if (iqcnt++ > 5000) {
printk(KERN_ERR "iq1:%x iq2:%x iq3:%x iq4:%x iq5:%x iq6:%x\n",
iq1, iq2, iq3, iq4, iq5, iq6);
iqcnt = 0;
}
#endif
if (!r_irq_statech &&
!(status & (V_DTMF_STA | V_LOST_STA | V_EXT_IRQSTA |
V_MISC_IRQSTA | V_FR_IRQSTA))) {
/* irq is not for us */
goto irq_notforus;
}
hc->irqcnt++;
if (r_irq_statech) {
if (hc->type != 1)
ph_state_irq(hc, r_irq_statech);
}
if (status & V_EXT_IRQSTA)
; /* external IRQ */
if (status & V_LOST_STA) {
/* LOST IRQ */
HFC_outb(hc, R_INC_RES_FIFO, V_RES_LOST); /* clear irq! */
}
if (status & V_MISC_IRQSTA) {
/* misc IRQ */
r_irq_misc = HFC_inb_nodebug(hc, R_IRQ_MISC);
r_irq_misc &= hc->hw.r_irqmsk_misc; /* ignore disabled irqs */
if (r_irq_misc & V_STA_IRQ) {
if (hc->type == 1) {
/* state machine */
dch = hc->chan[hc->dslot].dch;
e1_syncsta = HFC_inb_nodebug(hc, R_SYNC_STA);
if (test_bit(HFC_CHIP_PLXSD, &hc->chip)
&& hc->e1_getclock) {
if (e1_syncsta & V_FR_SYNC_E1)
hc->syncronized = 1;
else
hc->syncronized = 0;
}
/* undocumented: status changes during read */
dch->state = HFC_inb_nodebug(hc, R_E1_RD_STA);
while (dch->state != (temp =
HFC_inb_nodebug(hc, R_E1_RD_STA))) {
if (debug & DEBUG_HFCMULTI_STATE)
printk(KERN_DEBUG "%s: reread "
"STATE because %d!=%d\n",
__func__, temp,
dch->state);
dch->state = temp; /* repeat */
}
dch->state = HFC_inb_nodebug(hc, R_E1_RD_STA)
& 0x7;
schedule_event(dch, FLG_PHCHANGE);
if (debug & DEBUG_HFCMULTI_STATE)
printk(KERN_DEBUG
"%s: E1 (id=%d) newstate %x\n",
__func__, hc->id, dch->state);
if (test_bit(HFC_CHIP_PLXSD, &hc->chip))
plxsd_checksync(hc, 0);
}
}
if (r_irq_misc & V_TI_IRQ) {
if (hc->iclock_on)
mISDN_clock_update(hc->iclock, poll, NULL);
handle_timer_irq(hc);
}
if (r_irq_misc & V_DTMF_IRQ) {
hfcmulti_dtmf(hc);
}
if (r_irq_misc & V_IRQ_PROC) {
static int irq_proc_cnt;
if (!irq_proc_cnt++)
printk(KERN_WARNING "%s: got V_IRQ_PROC -"
" this should not happen\n", __func__);
}
}
if (status & V_FR_IRQSTA) {
/* FIFO IRQ */
r_irq_oview = HFC_inb_nodebug(hc, R_IRQ_OVIEW);
for (i = 0; i < 8; i++) {
if (r_irq_oview & (1 << i))
fifo_irq(hc, i);
}
}
#ifdef IRQ_DEBUG
irqsem = 0;
#endif
spin_unlock(&hc->lock);
return IRQ_HANDLED;
irq_notforus:
#ifdef IRQ_DEBUG
irqsem = 0;
#endif
spin_unlock(&hc->lock);
return IRQ_NONE;
}
/*
* timer callback for D-chan busy resolution. Currently no function
*/
static void
hfcmulti_dbusy_timer(struct hfc_multi *hc)
{
}
/*
* activate/deactivate hardware for selected channels and mode
*
* configure B-channel with the given protocol
* ch eqals to the HFC-channel (0-31)
* ch is the number of channel (0-4,4-7,8-11,12-15,16-19,20-23,24-27,28-31
* for S/T, 1-31 for E1)
* the hdlc interrupts will be set/unset
*/
static int
mode_hfcmulti(struct hfc_multi *hc, int ch, int protocol, int slot_tx,
int bank_tx, int slot_rx, int bank_rx)
{
int flow_tx = 0, flow_rx = 0, routing = 0;
int oslot_tx, oslot_rx;
int conf;
if (ch < 0 || ch > 31)
return EINVAL;
oslot_tx = hc->chan[ch].slot_tx;
oslot_rx = hc->chan[ch].slot_rx;
conf = hc->chan[ch].conf;
if (debug & DEBUG_HFCMULTI_MODE)
printk(KERN_DEBUG
"%s: card %d channel %d protocol %x slot old=%d new=%d "
"bank new=%d (TX) slot old=%d new=%d bank new=%d (RX)\n",
__func__, hc->id, ch, protocol, oslot_tx, slot_tx,
bank_tx, oslot_rx, slot_rx, bank_rx);
if (oslot_tx >= 0 && slot_tx != oslot_tx) {
/* remove from slot */
if (debug & DEBUG_HFCMULTI_MODE)
printk(KERN_DEBUG "%s: remove from slot %d (TX)\n",
__func__, oslot_tx);
if (hc->slot_owner[oslot_tx<<1] == ch) {
HFC_outb(hc, R_SLOT, oslot_tx << 1);
HFC_outb(hc, A_SL_CFG, 0);
HFC_outb(hc, A_CONF, 0);
hc->slot_owner[oslot_tx<<1] = -1;
} else {
if (debug & DEBUG_HFCMULTI_MODE)
printk(KERN_DEBUG
"%s: we are not owner of this tx slot "
"anymore, channel %d is.\n",
__func__, hc->slot_owner[oslot_tx<<1]);
}
}
if (oslot_rx >= 0 && slot_rx != oslot_rx) {
/* remove from slot */
if (debug & DEBUG_HFCMULTI_MODE)
printk(KERN_DEBUG
"%s: remove from slot %d (RX)\n",
__func__, oslot_rx);
if (hc->slot_owner[(oslot_rx << 1) | 1] == ch) {
HFC_outb(hc, R_SLOT, (oslot_rx << 1) | V_SL_DIR);
HFC_outb(hc, A_SL_CFG, 0);
hc->slot_owner[(oslot_rx << 1) | 1] = -1;
} else {
if (debug & DEBUG_HFCMULTI_MODE)
printk(KERN_DEBUG
"%s: we are not owner of this rx slot "
"anymore, channel %d is.\n",
__func__,
hc->slot_owner[(oslot_rx << 1) | 1]);
}
}
if (slot_tx < 0) {
flow_tx = 0x80; /* FIFO->ST */
/* disable pcm slot */
hc->chan[ch].slot_tx = -1;
hc->chan[ch].bank_tx = 0;
} else {
/* set pcm slot */
if (hc->chan[ch].txpending)
flow_tx = 0x80; /* FIFO->ST */
else
flow_tx = 0xc0; /* PCM->ST */
/* put on slot */
routing = bank_tx ? 0xc0 : 0x80;
if (conf >= 0 || bank_tx > 1)
routing = 0x40; /* loop */
if (debug & DEBUG_HFCMULTI_MODE)
printk(KERN_DEBUG "%s: put channel %d to slot %d bank"
" %d flow %02x routing %02x conf %d (TX)\n",
__func__, ch, slot_tx, bank_tx,
flow_tx, routing, conf);
HFC_outb(hc, R_SLOT, slot_tx << 1);
HFC_outb(hc, A_SL_CFG, (ch<<1) | routing);
HFC_outb(hc, A_CONF, (conf < 0) ? 0 : (conf | V_CONF_SL));
hc->slot_owner[slot_tx << 1] = ch;
hc->chan[ch].slot_tx = slot_tx;
hc->chan[ch].bank_tx = bank_tx;
}
if (slot_rx < 0) {
/* disable pcm slot */
flow_rx = 0x80; /* ST->FIFO */
hc->chan[ch].slot_rx = -1;
hc->chan[ch].bank_rx = 0;
} else {
/* set pcm slot */
if (hc->chan[ch].txpending)
flow_rx = 0x80; /* ST->FIFO */
else
flow_rx = 0xc0; /* ST->(FIFO,PCM) */
/* put on slot */
routing = bank_rx?0x80:0xc0; /* reversed */
if (conf >= 0 || bank_rx > 1)
routing = 0x40; /* loop */
if (debug & DEBUG_HFCMULTI_MODE)
printk(KERN_DEBUG "%s: put channel %d to slot %d bank"
" %d flow %02x routing %02x conf %d (RX)\n",
__func__, ch, slot_rx, bank_rx,
flow_rx, routing, conf);
HFC_outb(hc, R_SLOT, (slot_rx<<1) | V_SL_DIR);
HFC_outb(hc, A_SL_CFG, (ch<<1) | V_CH_DIR | routing);
hc->slot_owner[(slot_rx<<1)|1] = ch;
hc->chan[ch].slot_rx = slot_rx;
hc->chan[ch].bank_rx = bank_rx;
}
switch (protocol) {
case (ISDN_P_NONE):
/* disable TX fifo */
HFC_outb(hc, R_FIFO, ch << 1);
HFC_wait(hc);
HFC_outb(hc, A_CON_HDLC, flow_tx | 0x00 | V_IFF);
HFC_outb(hc, A_SUBCH_CFG, 0);
HFC_outb(hc, A_IRQ_MSK, 0);
HFC_outb(hc, R_INC_RES_FIFO, V_RES_F);
HFC_wait(hc);
/* disable RX fifo */
HFC_outb(hc, R_FIFO, (ch<<1)|1);
HFC_wait(hc);
HFC_outb(hc, A_CON_HDLC, flow_rx | 0x00);
HFC_outb(hc, A_SUBCH_CFG, 0);
HFC_outb(hc, A_IRQ_MSK, 0);
HFC_outb(hc, R_INC_RES_FIFO, V_RES_F);
HFC_wait(hc);
if (hc->chan[ch].bch && hc->type != 1) {
hc->hw.a_st_ctrl0[hc->chan[ch].port] &=
((ch & 0x3) == 0)? ~V_B1_EN: ~V_B2_EN;
HFC_outb(hc, R_ST_SEL, hc->chan[ch].port);
/* undocumented: delay after R_ST_SEL */
udelay(1);
HFC_outb(hc, A_ST_CTRL0,
hc->hw.a_st_ctrl0[hc->chan[ch].port]);
}
if (hc->chan[ch].bch) {
test_and_clear_bit(FLG_HDLC, &hc->chan[ch].bch->Flags);
test_and_clear_bit(FLG_TRANSPARENT,
&hc->chan[ch].bch->Flags);
}
break;
case (ISDN_P_B_RAW): /* B-channel */
if (test_bit(HFC_CHIP_B410P, &hc->chip) &&
(hc->chan[ch].slot_rx < 0) &&
(hc->chan[ch].slot_tx < 0)) {
printk(KERN_DEBUG
"Setting B-channel %d to echo cancelable "
"state on PCM slot %d\n", ch,
((ch / 4) * 8) + ((ch % 4) * 4) + 1);
printk(KERN_DEBUG
"Enabling pass through for channel\n");
vpm_out(hc, ch, ((ch / 4) * 8) +
((ch % 4) * 4) + 1, 0x01);
/* rx path */
/* S/T -> PCM */
HFC_outb(hc, R_FIFO, (ch << 1));
HFC_wait(hc);
HFC_outb(hc, A_CON_HDLC, 0xc0 | V_HDLC_TRP | V_IFF);
HFC_outb(hc, R_SLOT, (((ch / 4) * 8) +
((ch % 4) * 4) + 1) << 1);
HFC_outb(hc, A_SL_CFG, 0x80 | (ch << 1));
/* PCM -> FIFO */
HFC_outb(hc, R_FIFO, 0x20 | (ch << 1) | 1);
HFC_wait(hc);
HFC_outb(hc, A_CON_HDLC, 0x20 | V_HDLC_TRP | V_IFF);
HFC_outb(hc, A_SUBCH_CFG, 0);
HFC_outb(hc, A_IRQ_MSK, 0);
HFC_outb(hc, R_INC_RES_FIFO, V_RES_F);
HFC_wait(hc);
HFC_outb(hc, R_SLOT, ((((ch / 4) * 8) +
((ch % 4) * 4) + 1) << 1) | 1);
HFC_outb(hc, A_SL_CFG, 0x80 | 0x20 | (ch << 1) | 1);
/* tx path */
/* PCM -> S/T */
HFC_outb(hc, R_FIFO, (ch << 1) | 1);
HFC_wait(hc);
HFC_outb(hc, A_CON_HDLC, 0xc0 | V_HDLC_TRP | V_IFF);
HFC_outb(hc, R_SLOT, ((((ch / 4) * 8) +
((ch % 4) * 4)) << 1) | 1);
HFC_outb(hc, A_SL_CFG, 0x80 | 0x40 | (ch << 1) | 1);
/* FIFO -> PCM */
HFC_outb(hc, R_FIFO, 0x20 | (ch << 1));
HFC_wait(hc);
HFC_outb(hc, A_CON_HDLC, 0x20 | V_HDLC_TRP | V_IFF);
HFC_outb(hc, A_SUBCH_CFG, 0);
HFC_outb(hc, A_IRQ_MSK, 0);
HFC_outb(hc, R_INC_RES_FIFO, V_RES_F);
HFC_wait(hc);
/* tx silence */
HFC_outb_nodebug(hc, A_FIFO_DATA0_NOINC, hc->silence);
HFC_outb(hc, R_SLOT, (((ch / 4) * 8) +
((ch % 4) * 4)) << 1);
HFC_outb(hc, A_SL_CFG, 0x80 | 0x20 | (ch << 1));
} else {
/* enable TX fifo */
HFC_outb(hc, R_FIFO, ch << 1);
HFC_wait(hc);
HFC_outb(hc, A_CON_HDLC, flow_tx | 0x00 |
V_HDLC_TRP | V_IFF);
HFC_outb(hc, A_SUBCH_CFG, 0);
HFC_outb(hc, A_IRQ_MSK, 0);
HFC_outb(hc, R_INC_RES_FIFO, V_RES_F);
HFC_wait(hc);
/* tx silence */
HFC_outb_nodebug(hc, A_FIFO_DATA0_NOINC, hc->silence);
/* enable RX fifo */
HFC_outb(hc, R_FIFO, (ch<<1)|1);
HFC_wait(hc);
HFC_outb(hc, A_CON_HDLC, flow_rx | 0x00 | V_HDLC_TRP);
HFC_outb(hc, A_SUBCH_CFG, 0);
HFC_outb(hc, A_IRQ_MSK, 0);
HFC_outb(hc, R_INC_RES_FIFO, V_RES_F);
HFC_wait(hc);
}
if (hc->type != 1) {
hc->hw.a_st_ctrl0[hc->chan[ch].port] |=
((ch & 0x3) == 0) ? V_B1_EN : V_B2_EN;
HFC_outb(hc, R_ST_SEL, hc->chan[ch].port);
/* undocumented: delay after R_ST_SEL */
udelay(1);
HFC_outb(hc, A_ST_CTRL0,
hc->hw.a_st_ctrl0[hc->chan[ch].port]);
}
if (hc->chan[ch].bch)
test_and_set_bit(FLG_TRANSPARENT,
&hc->chan[ch].bch->Flags);
break;
case (ISDN_P_B_HDLC): /* B-channel */
case (ISDN_P_TE_S0): /* D-channel */
case (ISDN_P_NT_S0):
case (ISDN_P_TE_E1):
case (ISDN_P_NT_E1):
/* enable TX fifo */
HFC_outb(hc, R_FIFO, ch<<1);
HFC_wait(hc);
if (hc->type == 1 || hc->chan[ch].bch) {
/* E1 or B-channel */
HFC_outb(hc, A_CON_HDLC, flow_tx | 0x04);
HFC_outb(hc, A_SUBCH_CFG, 0);
} else {
/* D-Channel without HDLC fill flags */
HFC_outb(hc, A_CON_HDLC, flow_tx | 0x04 | V_IFF);
HFC_outb(hc, A_SUBCH_CFG, 2);
}
HFC_outb(hc, A_IRQ_MSK, V_IRQ);
HFC_outb(hc, R_INC_RES_FIFO, V_RES_F);
HFC_wait(hc);
/* enable RX fifo */
HFC_outb(hc, R_FIFO, (ch<<1)|1);
HFC_wait(hc);
HFC_outb(hc, A_CON_HDLC, flow_rx | 0x04);
if (hc->type == 1 || hc->chan[ch].bch)
HFC_outb(hc, A_SUBCH_CFG, 0); /* full 8 bits */
else
HFC_outb(hc, A_SUBCH_CFG, 2); /* 2 bits dchannel */
HFC_outb(hc, A_IRQ_MSK, V_IRQ);
HFC_outb(hc, R_INC_RES_FIFO, V_RES_F);
HFC_wait(hc);
if (hc->chan[ch].bch) {
test_and_set_bit(FLG_HDLC, &hc->chan[ch].bch->Flags);
if (hc->type != 1) {
hc->hw.a_st_ctrl0[hc->chan[ch].port] |=
((ch&0x3) == 0) ? V_B1_EN : V_B2_EN;
HFC_outb(hc, R_ST_SEL, hc->chan[ch].port);
/* undocumented: delay after R_ST_SEL */
udelay(1);
HFC_outb(hc, A_ST_CTRL0,
hc->hw.a_st_ctrl0[hc->chan[ch].port]);
}
}
break;
default:
printk(KERN_DEBUG "%s: protocol not known %x\n",
__func__, protocol);
hc->chan[ch].protocol = ISDN_P_NONE;
return -ENOPROTOOPT;
}
hc->chan[ch].protocol = protocol;
return 0;
}
/*
* connect/disconnect PCM
*/
static void
hfcmulti_pcm(struct hfc_multi *hc, int ch, int slot_tx, int bank_tx,
int slot_rx, int bank_rx)
{
if (slot_rx < 0 || slot_rx < 0 || bank_tx < 0 || bank_rx < 0) {
/* disable PCM */
mode_hfcmulti(hc, ch, hc->chan[ch].protocol, -1, 0, -1, 0);
return;
}
/* enable pcm */
mode_hfcmulti(hc, ch, hc->chan[ch].protocol, slot_tx, bank_tx,
slot_rx, bank_rx);
}
/*
* set/disable conference
*/
static void
hfcmulti_conf(struct hfc_multi *hc, int ch, int num)
{
if (num >= 0 && num <= 7)
hc->chan[ch].conf = num;
else
hc->chan[ch].conf = -1;
mode_hfcmulti(hc, ch, hc->chan[ch].protocol, hc->chan[ch].slot_tx,
hc->chan[ch].bank_tx, hc->chan[ch].slot_rx,
hc->chan[ch].bank_rx);
}
/*
* set/disable sample loop
*/
/* NOTE: this function is experimental and therefore disabled */
/*
* Layer 1 callback function
*/
static int
hfcm_l1callback(struct dchannel *dch, u_int cmd)
{
struct hfc_multi *hc = dch->hw;
u_long flags;
switch (cmd) {
case INFO3_P8:
case INFO3_P10:
break;
case HW_RESET_REQ:
/* start activation */
spin_lock_irqsave(&hc->lock, flags);
if (hc->type == 1) {
if (debug & DEBUG_HFCMULTI_MSG)
printk(KERN_DEBUG
"%s: HW_RESET_REQ no BRI\n",
__func__);
} else {
HFC_outb(hc, R_ST_SEL, hc->chan[dch->slot].port);
/* undocumented: delay after R_ST_SEL */
udelay(1);
HFC_outb(hc, A_ST_WR_STATE, V_ST_LD_STA | 3); /* F3 */
udelay(6); /* wait at least 5,21us */
HFC_outb(hc, A_ST_WR_STATE, 3);
HFC_outb(hc, A_ST_WR_STATE, 3 | (V_ST_ACT*3));
/* activate */
}
spin_unlock_irqrestore(&hc->lock, flags);
l1_event(dch->l1, HW_POWERUP_IND);
break;
case HW_DEACT_REQ:
/* start deactivation */
spin_lock_irqsave(&hc->lock, flags);
if (hc->type == 1) {
if (debug & DEBUG_HFCMULTI_MSG)
printk(KERN_DEBUG
"%s: HW_DEACT_REQ no BRI\n",
__func__);
} else {
HFC_outb(hc, R_ST_SEL, hc->chan[dch->slot].port);
/* undocumented: delay after R_ST_SEL */
udelay(1);
HFC_outb(hc, A_ST_WR_STATE, V_ST_ACT*2);
/* deactivate */
if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
hc->syncronized &=
~(1 << hc->chan[dch->slot].port);
plxsd_checksync(hc, 0);
}
}
skb_queue_purge(&dch->squeue);
if (dch->tx_skb) {
dev_kfree_skb(dch->tx_skb);
dch->tx_skb = NULL;
}
dch->tx_idx = 0;
if (dch->rx_skb) {
dev_kfree_skb(dch->rx_skb);
dch->rx_skb = NULL;
}
test_and_clear_bit(FLG_TX_BUSY, &dch->Flags);
if (test_and_clear_bit(FLG_BUSY_TIMER, &dch->Flags))
del_timer(&dch->timer);
spin_unlock_irqrestore(&hc->lock, flags);
break;
case HW_POWERUP_REQ:
spin_lock_irqsave(&hc->lock, flags);
if (hc->type == 1) {
if (debug & DEBUG_HFCMULTI_MSG)
printk(KERN_DEBUG
"%s: HW_POWERUP_REQ no BRI\n",
__func__);
} else {
HFC_outb(hc, R_ST_SEL, hc->chan[dch->slot].port);
/* undocumented: delay after R_ST_SEL */
udelay(1);
HFC_outb(hc, A_ST_WR_STATE, 3 | 0x10); /* activate */
udelay(6); /* wait at least 5,21us */
HFC_outb(hc, A_ST_WR_STATE, 3); /* activate */
}
spin_unlock_irqrestore(&hc->lock, flags);
break;
case PH_ACTIVATE_IND:
test_and_set_bit(FLG_ACTIVE, &dch->Flags);
_queue_data(&dch->dev.D, cmd, MISDN_ID_ANY, 0, NULL,
GFP_ATOMIC);
break;
case PH_DEACTIVATE_IND:
test_and_clear_bit(FLG_ACTIVE, &dch->Flags);
_queue_data(&dch->dev.D, cmd, MISDN_ID_ANY, 0, NULL,
GFP_ATOMIC);
break;
default:
if (dch->debug & DEBUG_HW)
printk(KERN_DEBUG "%s: unknown command %x\n",
__func__, cmd);
return -1;
}
return 0;
}
/*
* Layer2 -> Layer 1 Transfer
*/
static int
handle_dmsg(struct mISDNchannel *ch, struct sk_buff *skb)
{
struct mISDNdevice *dev = container_of(ch, struct mISDNdevice, D);
struct dchannel *dch = container_of(dev, struct dchannel, dev);
struct hfc_multi *hc = dch->hw;
struct mISDNhead *hh = mISDN_HEAD_P(skb);
int ret = -EINVAL;
unsigned int id;
u_long flags;
switch (hh->prim) {
case PH_DATA_REQ:
if (skb->len < 1)
break;
spin_lock_irqsave(&hc->lock, flags);
ret = dchannel_senddata(dch, skb);
if (ret > 0) { /* direct TX */
id = hh->id; /* skb can be freed */
hfcmulti_tx(hc, dch->slot);
ret = 0;
/* start fifo */
HFC_outb(hc, R_FIFO, 0);
HFC_wait(hc);
spin_unlock_irqrestore(&hc->lock, flags);
queue_ch_frame(ch, PH_DATA_CNF, id, NULL);
} else
spin_unlock_irqrestore(&hc->lock, flags);
return ret;
case PH_ACTIVATE_REQ:
if (dch->dev.D.protocol != ISDN_P_TE_S0) {
spin_lock_irqsave(&hc->lock, flags);
ret = 0;
if (debug & DEBUG_HFCMULTI_MSG)
printk(KERN_DEBUG
"%s: PH_ACTIVATE port %d (0..%d)\n",
__func__, hc->chan[dch->slot].port,
hc->ports-1);
/* start activation */
if (hc->type == 1) {
ph_state_change(dch);
if (debug & DEBUG_HFCMULTI_STATE)
printk(KERN_DEBUG
"%s: E1 report state %x \n",
__func__, dch->state);
} else {
HFC_outb(hc, R_ST_SEL,
hc->chan[dch->slot].port);
/* undocumented: delay after R_ST_SEL */
udelay(1);
HFC_outb(hc, A_ST_WR_STATE, V_ST_LD_STA | 1);
/* G1 */
udelay(6); /* wait at least 5,21us */
HFC_outb(hc, A_ST_WR_STATE, 1);
HFC_outb(hc, A_ST_WR_STATE, 1 |
(V_ST_ACT*3)); /* activate */
dch->state = 1;
}
spin_unlock_irqrestore(&hc->lock, flags);
} else
ret = l1_event(dch->l1, hh->prim);
break;
case PH_DEACTIVATE_REQ:
test_and_clear_bit(FLG_L2_ACTIVATED, &dch->Flags);
if (dch->dev.D.protocol != ISDN_P_TE_S0) {
spin_lock_irqsave(&hc->lock, flags);
if (debug & DEBUG_HFCMULTI_MSG)
printk(KERN_DEBUG
"%s: PH_DEACTIVATE port %d (0..%d)\n",
__func__, hc->chan[dch->slot].port,
hc->ports-1);
/* start deactivation */
if (hc->type == 1) {
if (debug & DEBUG_HFCMULTI_MSG)
printk(KERN_DEBUG
"%s: PH_DEACTIVATE no BRI\n",
__func__);
} else {
HFC_outb(hc, R_ST_SEL,
hc->chan[dch->slot].port);
/* undocumented: delay after R_ST_SEL */
udelay(1);
HFC_outb(hc, A_ST_WR_STATE, V_ST_ACT * 2);
/* deactivate */
dch->state = 1;
}
skb_queue_purge(&dch->squeue);
if (dch->tx_skb) {
dev_kfree_skb(dch->tx_skb);
dch->tx_skb = NULL;
}
dch->tx_idx = 0;
if (dch->rx_skb) {
dev_kfree_skb(dch->rx_skb);
dch->rx_skb = NULL;
}
test_and_clear_bit(FLG_TX_BUSY, &dch->Flags);
if (test_and_clear_bit(FLG_BUSY_TIMER, &dch->Flags))
del_timer(&dch->timer);
#ifdef FIXME
if (test_and_clear_bit(FLG_L1_BUSY, &dch->Flags))
dchannel_sched_event(&hc->dch, D_CLEARBUSY);
#endif
ret = 0;
spin_unlock_irqrestore(&hc->lock, flags);
} else
ret = l1_event(dch->l1, hh->prim);
break;
}
if (!ret)
dev_kfree_skb(skb);
return ret;
}
static void
deactivate_bchannel(struct bchannel *bch)
{
struct hfc_multi *hc = bch->hw;
u_long flags;
spin_lock_irqsave(&hc->lock, flags);
if (test_and_clear_bit(FLG_TX_NEXT, &bch->Flags)) {
dev_kfree_skb(bch->next_skb);
bch->next_skb = NULL;
}
if (bch->tx_skb) {
dev_kfree_skb(bch->tx_skb);
bch->tx_skb = NULL;
}
bch->tx_idx = 0;
if (bch->rx_skb) {
dev_kfree_skb(bch->rx_skb);
bch->rx_skb = NULL;
}
hc->chan[bch->slot].coeff_count = 0;
test_and_clear_bit(FLG_ACTIVE, &bch->Flags);
test_and_clear_bit(FLG_TX_BUSY, &bch->Flags);
hc->chan[bch->slot].rx_off = 0;
hc->chan[bch->slot].conf = -1;
mode_hfcmulti(hc, bch->slot, ISDN_P_NONE, -1, 0, -1, 0);
spin_unlock_irqrestore(&hc->lock, flags);
}
static int
handle_bmsg(struct mISDNchannel *ch, struct sk_buff *skb)
{
struct bchannel *bch = container_of(ch, struct bchannel, ch);
struct hfc_multi *hc = bch->hw;
int ret = -EINVAL;
struct mISDNhead *hh = mISDN_HEAD_P(skb);
unsigned int id;
u_long flags;
switch (hh->prim) {
case PH_DATA_REQ:
if (!skb->len)
break;
spin_lock_irqsave(&hc->lock, flags);
ret = bchannel_senddata(bch, skb);
if (ret > 0) { /* direct TX */
id = hh->id; /* skb can be freed */
hfcmulti_tx(hc, bch->slot);
ret = 0;
/* start fifo */
HFC_outb_nodebug(hc, R_FIFO, 0);
HFC_wait_nodebug(hc);
if (!test_bit(FLG_TRANSPARENT, &bch->Flags)) {
spin_unlock_irqrestore(&hc->lock, flags);
queue_ch_frame(ch, PH_DATA_CNF, id, NULL);
} else
spin_unlock_irqrestore(&hc->lock, flags);
} else
spin_unlock_irqrestore(&hc->lock, flags);
return ret;
case PH_ACTIVATE_REQ:
if (debug & DEBUG_HFCMULTI_MSG)
printk(KERN_DEBUG "%s: PH_ACTIVATE ch %d (0..32)\n",
__func__, bch->slot);
spin_lock_irqsave(&hc->lock, flags);
/* activate B-channel if not already activated */
if (!test_and_set_bit(FLG_ACTIVE, &bch->Flags)) {
hc->chan[bch->slot].txpending = 0;
ret = mode_hfcmulti(hc, bch->slot,
ch->protocol,
hc->chan[bch->slot].slot_tx,
hc->chan[bch->slot].bank_tx,
hc->chan[bch->slot].slot_rx,
hc->chan[bch->slot].bank_rx);
if (!ret) {
if (ch->protocol == ISDN_P_B_RAW && !hc->dtmf
&& test_bit(HFC_CHIP_DTMF, &hc->chip)) {
/* start decoder */
hc->dtmf = 1;
if (debug & DEBUG_HFCMULTI_DTMF)
printk(KERN_DEBUG
"%s: start dtmf decoder\n",
__func__);
HFC_outb(hc, R_DTMF, hc->hw.r_dtmf |
V_RST_DTMF);
}
}
} else
ret = 0;
spin_unlock_irqrestore(&hc->lock, flags);
if (!ret)
_queue_data(ch, PH_ACTIVATE_IND, MISDN_ID_ANY, 0, NULL,
GFP_KERNEL);
break;
case PH_CONTROL_REQ:
spin_lock_irqsave(&hc->lock, flags);
switch (hh->id) {
case HFC_SPL_LOOP_ON: /* set sample loop */
if (debug & DEBUG_HFCMULTI_MSG)
printk(KERN_DEBUG
"%s: HFC_SPL_LOOP_ON (len = %d)\n",
__func__, skb->len);
ret = 0;
break;
case HFC_SPL_LOOP_OFF: /* set silence */
if (debug & DEBUG_HFCMULTI_MSG)
printk(KERN_DEBUG "%s: HFC_SPL_LOOP_OFF\n",
__func__);
ret = 0;
break;
default:
printk(KERN_ERR
"%s: unknown PH_CONTROL_REQ info %x\n",
__func__, hh->id);
ret = -EINVAL;
}
spin_unlock_irqrestore(&hc->lock, flags);
break;
case PH_DEACTIVATE_REQ:
deactivate_bchannel(bch); /* locked there */
_queue_data(ch, PH_DEACTIVATE_IND, MISDN_ID_ANY, 0, NULL,
GFP_KERNEL);
ret = 0;
break;
}
if (!ret)
dev_kfree_skb(skb);
return ret;
}
/*
* bchannel control function
*/
static int
channel_bctrl(struct bchannel *bch, struct mISDN_ctrl_req *cq)
{
int ret = 0;
struct dsp_features *features =
(struct dsp_features *)(*((u_long *)&cq->p1));
struct hfc_multi *hc = bch->hw;
int slot_tx;
int bank_tx;
int slot_rx;
int bank_rx;
int num;
switch (cq->op) {
case MISDN_CTRL_GETOP:
cq->op = MISDN_CTRL_HFC_OP | MISDN_CTRL_HW_FEATURES_OP
| MISDN_CTRL_RX_OFF | MISDN_CTRL_FILL_EMPTY;
break;
case MISDN_CTRL_RX_OFF: /* turn off / on rx stream */
hc->chan[bch->slot].rx_off = !!cq->p1;
if (!hc->chan[bch->slot].rx_off) {
/* reset fifo on rx on */
HFC_outb_nodebug(hc, R_FIFO, (bch->slot << 1) | 1);
HFC_wait_nodebug(hc);
HFC_outb_nodebug(hc, R_INC_RES_FIFO, V_RES_F);
HFC_wait_nodebug(hc);
}
if (debug & DEBUG_HFCMULTI_MSG)
printk(KERN_DEBUG "%s: RX_OFF request (nr=%d off=%d)\n",
__func__, bch->nr, hc->chan[bch->slot].rx_off);
break;
case MISDN_CTRL_FILL_EMPTY: /* fill fifo, if empty */
test_and_set_bit(FLG_FILLEMPTY, &bch->Flags);
if (debug & DEBUG_HFCMULTI_MSG)
printk(KERN_DEBUG "%s: FILL_EMPTY request (nr=%d "
"off=%d)\n", __func__, bch->nr, !!cq->p1);
break;
case MISDN_CTRL_HW_FEATURES: /* fill features structure */
if (debug & DEBUG_HFCMULTI_MSG)
printk(KERN_DEBUG "%s: HW_FEATURE request\n",
__func__);
/* create confirm */
features->hfc_id = hc->id;
if (test_bit(HFC_CHIP_DTMF, &hc->chip))
features->hfc_dtmf = 1;
features->hfc_loops = 0;
if (test_bit(HFC_CHIP_B410P, &hc->chip)) {
features->hfc_echocanhw = 1;
} else {
features->pcm_id = hc->pcm;
features->pcm_slots = hc->slots;
features->pcm_banks = 2;
}
break;
case MISDN_CTRL_HFC_PCM_CONN: /* connect to pcm timeslot (0..N) */
slot_tx = cq->p1 & 0xff;
bank_tx = cq->p1 >> 8;
slot_rx = cq->p2 & 0xff;
bank_rx = cq->p2 >> 8;
if (debug & DEBUG_HFCMULTI_MSG)
printk(KERN_DEBUG
"%s: HFC_PCM_CONN slot %d bank %d (TX) "
"slot %d bank %d (RX)\n",
__func__, slot_tx, bank_tx,
slot_rx, bank_rx);
if (slot_tx < hc->slots && bank_tx <= 2 &&
slot_rx < hc->slots && bank_rx <= 2)
hfcmulti_pcm(hc, bch->slot,
slot_tx, bank_tx, slot_rx, bank_rx);
else {
printk(KERN_WARNING
"%s: HFC_PCM_CONN slot %d bank %d (TX) "
"slot %d bank %d (RX) out of range\n",
__func__, slot_tx, bank_tx,
slot_rx, bank_rx);
ret = -EINVAL;
}
break;
case MISDN_CTRL_HFC_PCM_DISC: /* release interface from pcm timeslot */
if (debug & DEBUG_HFCMULTI_MSG)
printk(KERN_DEBUG "%s: HFC_PCM_DISC\n",
__func__);
hfcmulti_pcm(hc, bch->slot, -1, 0, -1, 0);
break;
case MISDN_CTRL_HFC_CONF_JOIN: /* join conference (0..7) */
num = cq->p1 & 0xff;
if (debug & DEBUG_HFCMULTI_MSG)
printk(KERN_DEBUG "%s: HFC_CONF_JOIN conf %d\n",
__func__, num);
if (num <= 7)
hfcmulti_conf(hc, bch->slot, num);
else {
printk(KERN_WARNING
"%s: HW_CONF_JOIN conf %d out of range\n",
__func__, num);
ret = -EINVAL;
}
break;
case MISDN_CTRL_HFC_CONF_SPLIT: /* split conference */
if (debug & DEBUG_HFCMULTI_MSG)
printk(KERN_DEBUG "%s: HFC_CONF_SPLIT\n", __func__);
hfcmulti_conf(hc, bch->slot, -1);
break;
case MISDN_CTRL_HFC_ECHOCAN_ON:
if (debug & DEBUG_HFCMULTI_MSG)
printk(KERN_DEBUG "%s: HFC_ECHOCAN_ON\n", __func__);
if (test_bit(HFC_CHIP_B410P, &hc->chip))
vpm_echocan_on(hc, bch->slot, cq->p1);
else
ret = -EINVAL;
break;
case MISDN_CTRL_HFC_ECHOCAN_OFF:
if (debug & DEBUG_HFCMULTI_MSG)
printk(KERN_DEBUG "%s: HFC_ECHOCAN_OFF\n",
__func__);
if (test_bit(HFC_CHIP_B410P, &hc->chip))
vpm_echocan_off(hc, bch->slot);
else
ret = -EINVAL;
break;
default:
printk(KERN_WARNING "%s: unknown Op %x\n",
__func__, cq->op);
ret = -EINVAL;
break;
}
return ret;
}
static int
hfcm_bctrl(struct mISDNchannel *ch, u_int cmd, void *arg)
{
struct bchannel *bch = container_of(ch, struct bchannel, ch);
struct hfc_multi *hc = bch->hw;
int err = -EINVAL;
u_long flags;
if (bch->debug & DEBUG_HW)
printk(KERN_DEBUG "%s: cmd:%x %p\n",
__func__, cmd, arg);
switch (cmd) {
case CLOSE_CHANNEL:
test_and_clear_bit(FLG_OPEN, &bch->Flags);
if (test_bit(FLG_ACTIVE, &bch->Flags))
deactivate_bchannel(bch); /* locked there */
ch->protocol = ISDN_P_NONE;
ch->peer = NULL;
module_put(THIS_MODULE);
err = 0;
break;
case CONTROL_CHANNEL:
spin_lock_irqsave(&hc->lock, flags);
err = channel_bctrl(bch, arg);
spin_unlock_irqrestore(&hc->lock, flags);
break;
default:
printk(KERN_WARNING "%s: unknown prim(%x)\n",
__func__, cmd);
}
return err;
}
/*
* handle D-channel events
*
* handle state change event
*/
static void
ph_state_change(struct dchannel *dch)
{
struct hfc_multi *hc = dch->hw;
int ch, i;
if (!dch) {
printk(KERN_WARNING "%s: ERROR given dch is NULL\n",
__func__);
return;
}
ch = dch->slot;
if (hc->type == 1) {
if (dch->dev.D.protocol == ISDN_P_TE_E1) {
if (debug & DEBUG_HFCMULTI_STATE)
printk(KERN_DEBUG
"%s: E1 TE (id=%d) newstate %x\n",
__func__, hc->id, dch->state);
} else {
if (debug & DEBUG_HFCMULTI_STATE)
printk(KERN_DEBUG
"%s: E1 NT (id=%d) newstate %x\n",
__func__, hc->id, dch->state);
}
switch (dch->state) {
case (1):
if (hc->e1_state != 1) {
for (i = 1; i <= 31; i++) {
/* reset fifos on e1 activation */
HFC_outb_nodebug(hc, R_FIFO, (i << 1) | 1);
HFC_wait_nodebug(hc);
HFC_outb_nodebug(hc,
R_INC_RES_FIFO, V_RES_F);
HFC_wait_nodebug(hc);
}
}
test_and_set_bit(FLG_ACTIVE, &dch->Flags);
_queue_data(&dch->dev.D, PH_ACTIVATE_IND,
MISDN_ID_ANY, 0, NULL, GFP_ATOMIC);
break;
default:
if (hc->e1_state != 1)
return;
test_and_clear_bit(FLG_ACTIVE, &dch->Flags);
_queue_data(&dch->dev.D, PH_DEACTIVATE_IND,
MISDN_ID_ANY, 0, NULL, GFP_ATOMIC);
}
hc->e1_state = dch->state;
} else {
if (dch->dev.D.protocol == ISDN_P_TE_S0) {
if (debug & DEBUG_HFCMULTI_STATE)
printk(KERN_DEBUG
"%s: S/T TE newstate %x\n",
__func__, dch->state);
switch (dch->state) {
case (0):
l1_event(dch->l1, HW_RESET_IND);
break;
case (3):
l1_event(dch->l1, HW_DEACT_IND);
break;
case (5):
case (8):
l1_event(dch->l1, ANYSIGNAL);
break;
case (6):
l1_event(dch->l1, INFO2);
break;
case (7):
l1_event(dch->l1, INFO4_P8);
break;
}
} else {
if (debug & DEBUG_HFCMULTI_STATE)
printk(KERN_DEBUG "%s: S/T NT newstate %x\n",
__func__, dch->state);
switch (dch->state) {
case (2):
if (hc->chan[ch].nt_timer == 0) {
hc->chan[ch].nt_timer = -1;
HFC_outb(hc, R_ST_SEL,
hc->chan[ch].port);
/* undocumented: delay after R_ST_SEL */
udelay(1);
HFC_outb(hc, A_ST_WR_STATE, 4 |
V_ST_LD_STA); /* G4 */
udelay(6); /* wait at least 5,21us */
HFC_outb(hc, A_ST_WR_STATE, 4);
dch->state = 4;
} else {
/* one extra count for the next event */
hc->chan[ch].nt_timer =
nt_t1_count[poll_timer] + 1;
HFC_outb(hc, R_ST_SEL,
hc->chan[ch].port);
/* undocumented: delay after R_ST_SEL */
udelay(1);
/* allow G2 -> G3 transition */
HFC_outb(hc, A_ST_WR_STATE, 2 |
V_SET_G2_G3);
}
break;
case (1):
hc->chan[ch].nt_timer = -1;
test_and_clear_bit(FLG_ACTIVE, &dch->Flags);
_queue_data(&dch->dev.D, PH_DEACTIVATE_IND,
MISDN_ID_ANY, 0, NULL, GFP_ATOMIC);
break;
case (4):
hc->chan[ch].nt_timer = -1;
break;
case (3):
hc->chan[ch].nt_timer = -1;
test_and_set_bit(FLG_ACTIVE, &dch->Flags);
_queue_data(&dch->dev.D, PH_ACTIVATE_IND,
MISDN_ID_ANY, 0, NULL, GFP_ATOMIC);
break;
}
}
}
}
/*
* called for card mode init message
*/
static void
hfcmulti_initmode(struct dchannel *dch)
{
struct hfc_multi *hc = dch->hw;
u_char a_st_wr_state, r_e1_wr_sta;
int i, pt;
if (debug & DEBUG_HFCMULTI_INIT)
printk(KERN_DEBUG "%s: entered\n", __func__);
if (hc->type == 1) {
hc->chan[hc->dslot].slot_tx = -1;
hc->chan[hc->dslot].slot_rx = -1;
hc->chan[hc->dslot].conf = -1;
if (hc->dslot) {
mode_hfcmulti(hc, hc->dslot, dch->dev.D.protocol,
-1, 0, -1, 0);
dch->timer.function = (void *) hfcmulti_dbusy_timer;
dch->timer.data = (long) dch;
init_timer(&dch->timer);
}
for (i = 1; i <= 31; i++) {
if (i == hc->dslot)
continue;
hc->chan[i].slot_tx = -1;
hc->chan[i].slot_rx = -1;
hc->chan[i].conf = -1;
mode_hfcmulti(hc, i, ISDN_P_NONE, -1, 0, -1, 0);
}
/* E1 */
if (test_bit(HFC_CFG_REPORT_LOS, &hc->chan[hc->dslot].cfg)) {
HFC_outb(hc, R_LOS0, 255); /* 2 ms */
HFC_outb(hc, R_LOS1, 255); /* 512 ms */
}
if (test_bit(HFC_CFG_OPTICAL, &hc->chan[hc->dslot].cfg)) {
HFC_outb(hc, R_RX0, 0);
hc->hw.r_tx0 = 0 | V_OUT_EN;
} else {
HFC_outb(hc, R_RX0, 1);
hc->hw.r_tx0 = 1 | V_OUT_EN;
}
hc->hw.r_tx1 = V_ATX | V_NTRI;
HFC_outb(hc, R_TX0, hc->hw.r_tx0);
HFC_outb(hc, R_TX1, hc->hw.r_tx1);
HFC_outb(hc, R_TX_FR0, 0x00);
HFC_outb(hc, R_TX_FR1, 0xf8);
if (test_bit(HFC_CFG_CRC4, &hc->chan[hc->dslot].cfg))
HFC_outb(hc, R_TX_FR2, V_TX_MF | V_TX_E | V_NEG_E);
HFC_outb(hc, R_RX_FR0, V_AUTO_RESYNC | V_AUTO_RECO | 0);
if (test_bit(HFC_CFG_CRC4, &hc->chan[hc->dslot].cfg))
HFC_outb(hc, R_RX_FR1, V_RX_MF | V_RX_MF_SYNC);
if (dch->dev.D.protocol == ISDN_P_NT_E1) {
if (debug & DEBUG_HFCMULTI_INIT)
printk(KERN_DEBUG "%s: E1 port is NT-mode\n",
__func__);
r_e1_wr_sta = 0; /* G0 */
hc->e1_getclock = 0;
} else {
if (debug & DEBUG_HFCMULTI_INIT)
printk(KERN_DEBUG "%s: E1 port is TE-mode\n",
__func__);
r_e1_wr_sta = 0; /* F0 */
hc->e1_getclock = 1;
}
if (test_bit(HFC_CHIP_RX_SYNC, &hc->chip))
HFC_outb(hc, R_SYNC_OUT, V_SYNC_E1_RX);
else
HFC_outb(hc, R_SYNC_OUT, 0);
if (test_bit(HFC_CHIP_E1CLOCK_GET, &hc->chip))
hc->e1_getclock = 1;
if (test_bit(HFC_CHIP_E1CLOCK_PUT, &hc->chip))
hc->e1_getclock = 0;
if (test_bit(HFC_CHIP_PCM_SLAVE, &hc->chip)) {
/* SLAVE (clock master) */
if (debug & DEBUG_HFCMULTI_INIT)
printk(KERN_DEBUG
"%s: E1 port is clock master "
"(clock from PCM)\n", __func__);
HFC_outb(hc, R_SYNC_CTRL, V_EXT_CLK_SYNC | V_PCM_SYNC);
} else {
if (hc->e1_getclock) {
/* MASTER (clock slave) */
if (debug & DEBUG_HFCMULTI_INIT)
printk(KERN_DEBUG
"%s: E1 port is clock slave "
"(clock to PCM)\n", __func__);
HFC_outb(hc, R_SYNC_CTRL, V_SYNC_OFFS);
} else {
/* MASTER (clock master) */
if (debug & DEBUG_HFCMULTI_INIT)
printk(KERN_DEBUG "%s: E1 port is "
"clock master "
"(clock from QUARTZ)\n",
__func__);
HFC_outb(hc, R_SYNC_CTRL, V_EXT_CLK_SYNC |
V_PCM_SYNC | V_JATT_OFF);
HFC_outb(hc, R_SYNC_OUT, 0);
}
}
HFC_outb(hc, R_JATT_ATT, 0x9c); /* undoc register */
HFC_outb(hc, R_PWM_MD, V_PWM0_MD);
HFC_outb(hc, R_PWM0, 0x50);
HFC_outb(hc, R_PWM1, 0xff);
/* state machine setup */
HFC_outb(hc, R_E1_WR_STA, r_e1_wr_sta | V_E1_LD_STA);
udelay(6); /* wait at least 5,21us */
HFC_outb(hc, R_E1_WR_STA, r_e1_wr_sta);
if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
hc->syncronized = 0;
plxsd_checksync(hc, 0);
}
} else {
i = dch->slot;
hc->chan[i].slot_tx = -1;
hc->chan[i].slot_rx = -1;
hc->chan[i].conf = -1;
mode_hfcmulti(hc, i, dch->dev.D.protocol, -1, 0, -1, 0);
dch->timer.function = (void *)hfcmulti_dbusy_timer;
dch->timer.data = (long) dch;
init_timer(&dch->timer);
hc->chan[i - 2].slot_tx = -1;
hc->chan[i - 2].slot_rx = -1;
hc->chan[i - 2].conf = -1;
mode_hfcmulti(hc, i - 2, ISDN_P_NONE, -1, 0, -1, 0);
hc->chan[i - 1].slot_tx = -1;
hc->chan[i - 1].slot_rx = -1;
hc->chan[i - 1].conf = -1;
mode_hfcmulti(hc, i - 1, ISDN_P_NONE, -1, 0, -1, 0);
/* ST */
pt = hc->chan[i].port;
/* select interface */
HFC_outb(hc, R_ST_SEL, pt);
/* undocumented: delay after R_ST_SEL */
udelay(1);
if (dch->dev.D.protocol == ISDN_P_NT_S0) {
if (debug & DEBUG_HFCMULTI_INIT)
printk(KERN_DEBUG
"%s: ST port %d is NT-mode\n",
__func__, pt);
/* clock delay */
HFC_outb(hc, A_ST_CLK_DLY, clockdelay_nt);
a_st_wr_state = 1; /* G1 */
hc->hw.a_st_ctrl0[pt] = V_ST_MD;
} else {
if (debug & DEBUG_HFCMULTI_INIT)
printk(KERN_DEBUG
"%s: ST port %d is TE-mode\n",
__func__, pt);
/* clock delay */
HFC_outb(hc, A_ST_CLK_DLY, clockdelay_te);
a_st_wr_state = 2; /* F2 */
hc->hw.a_st_ctrl0[pt] = 0;
}
if (!test_bit(HFC_CFG_NONCAP_TX, &hc->chan[i].cfg))
hc->hw.a_st_ctrl0[pt] |= V_TX_LI;
/* line setup */
HFC_outb(hc, A_ST_CTRL0, hc->hw.a_st_ctrl0[pt]);
/* disable E-channel */
if ((dch->dev.D.protocol == ISDN_P_NT_S0) ||
test_bit(HFC_CFG_DIS_ECHANNEL, &hc->chan[i].cfg))
HFC_outb(hc, A_ST_CTRL1, V_E_IGNO);
else
HFC_outb(hc, A_ST_CTRL1, 0);
/* enable B-channel receive */
HFC_outb(hc, A_ST_CTRL2, V_B1_RX_EN | V_B2_RX_EN);
/* state machine setup */
HFC_outb(hc, A_ST_WR_STATE, a_st_wr_state | V_ST_LD_STA);
udelay(6); /* wait at least 5,21us */
HFC_outb(hc, A_ST_WR_STATE, a_st_wr_state);
hc->hw.r_sci_msk |= 1 << pt;
/* state machine interrupts */
HFC_outb(hc, R_SCI_MSK, hc->hw.r_sci_msk);
/* unset sync on port */
if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
hc->syncronized &=
~(1 << hc->chan[dch->slot].port);
plxsd_checksync(hc, 0);
}
}
if (debug & DEBUG_HFCMULTI_INIT)
printk("%s: done\n", __func__);
}
static int
open_dchannel(struct hfc_multi *hc, struct dchannel *dch,
struct channel_req *rq)
{
int err = 0;
u_long flags;
if (debug & DEBUG_HW_OPEN)
printk(KERN_DEBUG "%s: dev(%d) open from %p\n", __func__,
dch->dev.id, __builtin_return_address(0));
if (rq->protocol == ISDN_P_NONE)
return -EINVAL;
if ((dch->dev.D.protocol != ISDN_P_NONE) &&
(dch->dev.D.protocol != rq->protocol)) {
if (debug & DEBUG_HFCMULTI_MODE)
printk(KERN_WARNING "%s: change protocol %x to %x\n",
__func__, dch->dev.D.protocol, rq->protocol);
}
if ((dch->dev.D.protocol == ISDN_P_TE_S0)
&& (rq->protocol != ISDN_P_TE_S0))
l1_event(dch->l1, CLOSE_CHANNEL);
if (dch->dev.D.protocol != rq->protocol) {
if (rq->protocol == ISDN_P_TE_S0) {
err = create_l1(dch, hfcm_l1callback);
if (err)
return err;
}
dch->dev.D.protocol = rq->protocol;
spin_lock_irqsave(&hc->lock, flags);
hfcmulti_initmode(dch);
spin_unlock_irqrestore(&hc->lock, flags);
}
if (((rq->protocol == ISDN_P_NT_S0) && (dch->state == 3)) ||
((rq->protocol == ISDN_P_TE_S0) && (dch->state == 7)) ||
((rq->protocol == ISDN_P_NT_E1) && (dch->state == 1)) ||
((rq->protocol == ISDN_P_TE_E1) && (dch->state == 1))) {
_queue_data(&dch->dev.D, PH_ACTIVATE_IND, MISDN_ID_ANY,
0, NULL, GFP_KERNEL);
}
rq->ch = &dch->dev.D;
if (!try_module_get(THIS_MODULE))
printk(KERN_WARNING "%s:cannot get module\n", __func__);
return 0;
}
static int
open_bchannel(struct hfc_multi *hc, struct dchannel *dch,
struct channel_req *rq)
{
struct bchannel *bch;
int ch;
if (!test_channelmap(rq->adr.channel, dch->dev.channelmap))
return -EINVAL;
if (rq->protocol == ISDN_P_NONE)
return -EINVAL;
if (hc->type == 1)
ch = rq->adr.channel;
else
ch = (rq->adr.channel - 1) + (dch->slot - 2);
bch = hc->chan[ch].bch;
if (!bch) {
printk(KERN_ERR "%s:internal error ch %d has no bch\n",
__func__, ch);
return -EINVAL;
}
if (test_and_set_bit(FLG_OPEN, &bch->Flags))
return -EBUSY; /* b-channel can be only open once */
test_and_clear_bit(FLG_FILLEMPTY, &bch->Flags);
bch->ch.protocol = rq->protocol;
hc->chan[ch].rx_off = 0;
rq->ch = &bch->ch;
if (!try_module_get(THIS_MODULE))
printk(KERN_WARNING "%s:cannot get module\n", __func__);
return 0;
}
/*
* device control function
*/
static int
channel_dctrl(struct dchannel *dch, struct mISDN_ctrl_req *cq)
{
int ret = 0;
switch (cq->op) {
case MISDN_CTRL_GETOP:
cq->op = 0;
break;
default:
printk(KERN_WARNING "%s: unknown Op %x\n",
__func__, cq->op);
ret = -EINVAL;
break;
}
return ret;
}
static int
hfcm_dctrl(struct mISDNchannel *ch, u_int cmd, void *arg)
{
struct mISDNdevice *dev = container_of(ch, struct mISDNdevice, D);
struct dchannel *dch = container_of(dev, struct dchannel, dev);
struct hfc_multi *hc = dch->hw;
struct channel_req *rq;
int err = 0;
u_long flags;
if (dch->debug & DEBUG_HW)
printk(KERN_DEBUG "%s: cmd:%x %p\n",
__func__, cmd, arg);
switch (cmd) {
case OPEN_CHANNEL:
rq = arg;
switch (rq->protocol) {
case ISDN_P_TE_S0:
case ISDN_P_NT_S0:
if (hc->type == 1) {
err = -EINVAL;
break;
}
err = open_dchannel(hc, dch, rq); /* locked there */
break;
case ISDN_P_TE_E1:
case ISDN_P_NT_E1:
if (hc->type != 1) {
err = -EINVAL;
break;
}
err = open_dchannel(hc, dch, rq); /* locked there */
break;
default:
spin_lock_irqsave(&hc->lock, flags);
err = open_bchannel(hc, dch, rq);
spin_unlock_irqrestore(&hc->lock, flags);
}
break;
case CLOSE_CHANNEL:
if (debug & DEBUG_HW_OPEN)
printk(KERN_DEBUG "%s: dev(%d) close from %p\n",
__func__, dch->dev.id,
__builtin_return_address(0));
module_put(THIS_MODULE);
break;
case CONTROL_CHANNEL:
spin_lock_irqsave(&hc->lock, flags);
err = channel_dctrl(dch, arg);
spin_unlock_irqrestore(&hc->lock, flags);
break;
default:
if (dch->debug & DEBUG_HW)
printk(KERN_DEBUG "%s: unknown command %x\n",
__func__, cmd);
err = -EINVAL;
}
return err;
}
static int
clockctl(void *priv, int enable)
{
struct hfc_multi *hc = priv;
hc->iclock_on = enable;
return 0;
}
/*
* initialize the card
*/
/*
* start timer irq, wait some time and check if we have interrupts.
* if not, reset chip and try again.
*/
static int
init_card(struct hfc_multi *hc)
{
int err = -EIO;
u_long flags;
void __iomem *plx_acc;
u_long plx_flags;
if (debug & DEBUG_HFCMULTI_INIT)
printk(KERN_DEBUG "%s: entered\n", __func__);
spin_lock_irqsave(&hc->lock, flags);
/* set interrupts but leave global interrupt disabled */
hc->hw.r_irq_ctrl = V_FIFO_IRQ;
disable_hwirq(hc);
spin_unlock_irqrestore(&hc->lock, flags);
if (request_irq(hc->pci_dev->irq, hfcmulti_interrupt, IRQF_SHARED,
"HFC-multi", hc)) {
printk(KERN_WARNING "mISDN: Could not get interrupt %d.\n",
hc->pci_dev->irq);
return -EIO;
}
hc->irq = hc->pci_dev->irq;
if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
spin_lock_irqsave(&plx_lock, plx_flags);
plx_acc = hc->plx_membase + PLX_INTCSR;
writew((PLX_INTCSR_PCIINT_ENABLE | PLX_INTCSR_LINTI1_ENABLE),
plx_acc); /* enable PCI & LINT1 irq */
spin_unlock_irqrestore(&plx_lock, plx_flags);
}
if (debug & DEBUG_HFCMULTI_INIT)
printk(KERN_DEBUG "%s: IRQ %d count %d\n",
__func__, hc->irq, hc->irqcnt);
err = init_chip(hc);
if (err)
goto error;
/*
* Finally enable IRQ output
* this is only allowed, if an IRQ routine is allready
* established for this HFC, so don't do that earlier
*/
spin_lock_irqsave(&hc->lock, flags);
enable_hwirq(hc);
spin_unlock_irqrestore(&hc->lock, flags);
/* printk(KERN_DEBUG "no master irq set!!!\n"); */
set_current_state(TASK_UNINTERRUPTIBLE);
schedule_timeout((100*HZ)/1000); /* Timeout 100ms */
/* turn IRQ off until chip is completely initialized */
spin_lock_irqsave(&hc->lock, flags);
disable_hwirq(hc);
spin_unlock_irqrestore(&hc->lock, flags);
if (debug & DEBUG_HFCMULTI_INIT)
printk(KERN_DEBUG "%s: IRQ %d count %d\n",
__func__, hc->irq, hc->irqcnt);
if (hc->irqcnt) {
if (debug & DEBUG_HFCMULTI_INIT)
printk(KERN_DEBUG "%s: done\n", __func__);
return 0;
}
if (test_bit(HFC_CHIP_PCM_SLAVE, &hc->chip)) {
printk(KERN_INFO "ignoring missing interrupts\n");
return 0;
}
printk(KERN_ERR "HFC PCI: IRQ(%d) getting no interrupts during init.\n",
hc->irq);
err = -EIO;
error:
if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
spin_lock_irqsave(&plx_lock, plx_flags);
plx_acc = hc->plx_membase + PLX_INTCSR;
writew(0x00, plx_acc); /*disable IRQs*/
spin_unlock_irqrestore(&plx_lock, plx_flags);
}
if (debug & DEBUG_HFCMULTI_INIT)
printk(KERN_WARNING "%s: free irq %d\n", __func__, hc->irq);
if (hc->irq) {
free_irq(hc->irq, hc);
hc->irq = 0;
}
if (debug & DEBUG_HFCMULTI_INIT)
printk(KERN_DEBUG "%s: done (err=%d)\n", __func__, err);
return err;
}
/*
* find pci device and set it up
*/
static int
setup_pci(struct hfc_multi *hc, struct pci_dev *pdev,
const struct pci_device_id *ent)
{
struct hm_map *m = (struct hm_map *)ent->driver_data;
printk(KERN_INFO
"HFC-multi: card manufacturer: '%s' card name: '%s' clock: %s\n",
m->vendor_name, m->card_name, m->clock2 ? "double" : "normal");
hc->pci_dev = pdev;
if (m->clock2)
test_and_set_bit(HFC_CHIP_CLOCK2, &hc->chip);
if (ent->device == 0xB410) {
test_and_set_bit(HFC_CHIP_B410P, &hc->chip);
test_and_set_bit(HFC_CHIP_PCM_MASTER, &hc->chip);
test_and_clear_bit(HFC_CHIP_PCM_SLAVE, &hc->chip);
hc->slots = 32;
}
if (hc->pci_dev->irq <= 0) {
printk(KERN_WARNING "HFC-multi: No IRQ for PCI card found.\n");
return -EIO;
}
if (pci_enable_device(hc->pci_dev)) {
printk(KERN_WARNING "HFC-multi: Error enabling PCI card.\n");
return -EIO;
}
hc->leds = m->leds;
hc->ledstate = 0xAFFEAFFE;
hc->opticalsupport = m->opticalsupport;
/* set memory access methods */
if (m->io_mode) /* use mode from card config */
hc->io_mode = m->io_mode;
switch (hc->io_mode) {
case HFC_IO_MODE_PLXSD:
test_and_set_bit(HFC_CHIP_PLXSD, &hc->chip);
hc->slots = 128; /* required */
/* fall through */
case HFC_IO_MODE_PCIMEM:
hc->HFC_outb = HFC_outb_pcimem;
hc->HFC_inb = HFC_inb_pcimem;
hc->HFC_inw = HFC_inw_pcimem;
hc->HFC_wait = HFC_wait_pcimem;
hc->read_fifo = read_fifo_pcimem;
hc->write_fifo = write_fifo_pcimem;
break;
case HFC_IO_MODE_REGIO:
hc->HFC_outb = HFC_outb_regio;
hc->HFC_inb = HFC_inb_regio;
hc->HFC_inw = HFC_inw_regio;
hc->HFC_wait = HFC_wait_regio;
hc->read_fifo = read_fifo_regio;
hc->write_fifo = write_fifo_regio;
break;
default:
printk(KERN_WARNING "HFC-multi: Invalid IO mode.\n");
pci_disable_device(hc->pci_dev);
return -EIO;
}
hc->HFC_outb_nodebug = hc->HFC_outb;
hc->HFC_inb_nodebug = hc->HFC_inb;
hc->HFC_inw_nodebug = hc->HFC_inw;
hc->HFC_wait_nodebug = hc->HFC_wait;
#ifdef HFC_REGISTER_DEBUG
hc->HFC_outb = HFC_outb_debug;
hc->HFC_inb = HFC_inb_debug;
hc->HFC_inw = HFC_inw_debug;
hc->HFC_wait = HFC_wait_debug;
#endif
hc->pci_iobase = 0;
hc->pci_membase = NULL;
hc->plx_membase = NULL;
switch (hc->io_mode) {
case HFC_IO_MODE_PLXSD:
hc->plx_origmembase = hc->pci_dev->resource[0].start;
/* MEMBASE 1 is PLX PCI Bridge */
if (!hc->plx_origmembase) {
printk(KERN_WARNING
"HFC-multi: No IO-Memory for PCI PLX bridge found\n");
pci_disable_device(hc->pci_dev);
return -EIO;
}
hc->plx_membase = ioremap(hc->plx_origmembase, 0x80);
if (!hc->plx_membase) {
printk(KERN_WARNING
"HFC-multi: failed to remap plx address space. "
"(internal error)\n");
pci_disable_device(hc->pci_dev);
return -EIO;
}
printk(KERN_INFO
"HFC-multi: plx_membase:%#lx plx_origmembase:%#lx\n",
(u_long)hc->plx_membase, hc->plx_origmembase);
hc->pci_origmembase = hc->pci_dev->resource[2].start;
/* MEMBASE 1 is PLX PCI Bridge */
if (!hc->pci_origmembase) {
printk(KERN_WARNING
"HFC-multi: No IO-Memory for PCI card found\n");
pci_disable_device(hc->pci_dev);
return -EIO;
}
hc->pci_membase = ioremap(hc->pci_origmembase, 0x400);
if (!hc->pci_membase) {
printk(KERN_WARNING "HFC-multi: failed to remap io "
"address space. (internal error)\n");
pci_disable_device(hc->pci_dev);
return -EIO;
}
printk(KERN_INFO
"card %d: defined at MEMBASE %#lx (%#lx) IRQ %d HZ %d "
"leds-type %d\n",
hc->id, (u_long)hc->pci_membase, hc->pci_origmembase,
hc->pci_dev->irq, HZ, hc->leds);
pci_write_config_word(hc->pci_dev, PCI_COMMAND, PCI_ENA_MEMIO);
break;
case HFC_IO_MODE_PCIMEM:
hc->pci_origmembase = hc->pci_dev->resource[1].start;
if (!hc->pci_origmembase) {
printk(KERN_WARNING
"HFC-multi: No IO-Memory for PCI card found\n");
pci_disable_device(hc->pci_dev);
return -EIO;
}
hc->pci_membase = ioremap(hc->pci_origmembase, 256);
if (!hc->pci_membase) {
printk(KERN_WARNING
"HFC-multi: failed to remap io address space. "
"(internal error)\n");
pci_disable_device(hc->pci_dev);
return -EIO;
}
printk(KERN_INFO "card %d: defined at MEMBASE %#lx (%#lx) IRQ %d "
"HZ %d leds-type %d\n", hc->id, (u_long)hc->pci_membase,
hc->pci_origmembase, hc->pci_dev->irq, HZ, hc->leds);
pci_write_config_word(hc->pci_dev, PCI_COMMAND, PCI_ENA_MEMIO);
break;
case HFC_IO_MODE_REGIO:
hc->pci_iobase = (u_int) hc->pci_dev->resource[0].start;
if (!hc->pci_iobase) {
printk(KERN_WARNING
"HFC-multi: No IO for PCI card found\n");
pci_disable_device(hc->pci_dev);
return -EIO;
}
if (!request_region(hc->pci_iobase, 8, "hfcmulti")) {
printk(KERN_WARNING "HFC-multi: failed to request "
"address space at 0x%08lx (internal error)\n",
hc->pci_iobase);
pci_disable_device(hc->pci_dev);
return -EIO;
}
printk(KERN_INFO
"%s %s: defined at IOBASE %#x IRQ %d HZ %d leds-type %d\n",
m->vendor_name, m->card_name, (u_int) hc->pci_iobase,
hc->pci_dev->irq, HZ, hc->leds);
pci_write_config_word(hc->pci_dev, PCI_COMMAND, PCI_ENA_REGIO);
break;
default:
printk(KERN_WARNING "HFC-multi: Invalid IO mode.\n");
pci_disable_device(hc->pci_dev);
return -EIO;
}
pci_set_drvdata(hc->pci_dev, hc);
/* At this point the needed PCI config is done */
/* fifos are still not enabled */
return 0;
}
/*
* remove port
*/
static void
release_port(struct hfc_multi *hc, struct dchannel *dch)
{
int pt, ci, i = 0;
u_long flags;
struct bchannel *pb;
ci = dch->slot;
pt = hc->chan[ci].port;
if (debug & DEBUG_HFCMULTI_INIT)
printk(KERN_DEBUG "%s: entered for port %d\n",
__func__, pt + 1);
if (pt >= hc->ports) {
printk(KERN_WARNING "%s: ERROR port out of range (%d).\n",
__func__, pt + 1);
return;
}
if (debug & DEBUG_HFCMULTI_INIT)
printk(KERN_DEBUG "%s: releasing port=%d\n",
__func__, pt + 1);
if (dch->dev.D.protocol == ISDN_P_TE_S0)
l1_event(dch->l1, CLOSE_CHANNEL);
hc->chan[ci].dch = NULL;
if (hc->created[pt]) {
hc->created[pt] = 0;
mISDN_unregister_device(&dch->dev);
}
spin_lock_irqsave(&hc->lock, flags);
if (dch->timer.function) {
del_timer(&dch->timer);
dch->timer.function = NULL;
}
if (hc->type == 1) { /* E1 */
/* remove sync */
if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
hc->syncronized = 0;
plxsd_checksync(hc, 1);
}
/* free channels */
for (i = 0; i <= 31; i++) {
if (hc->chan[i].bch) {
if (debug & DEBUG_HFCMULTI_INIT)
printk(KERN_DEBUG
"%s: free port %d channel %d\n",
__func__, hc->chan[i].port+1, i);
pb = hc->chan[i].bch;
hc->chan[i].bch = NULL;
spin_unlock_irqrestore(&hc->lock, flags);
mISDN_freebchannel(pb);
kfree(pb);
kfree(hc->chan[i].coeff);
spin_lock_irqsave(&hc->lock, flags);
}
}
} else {
/* remove sync */
if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
hc->syncronized &=
~(1 << hc->chan[ci].port);
plxsd_checksync(hc, 1);
}
/* free channels */
if (hc->chan[ci - 2].bch) {
if (debug & DEBUG_HFCMULTI_INIT)
printk(KERN_DEBUG
"%s: free port %d channel %d\n",
__func__, hc->chan[ci - 2].port+1,
ci - 2);
pb = hc->chan[ci - 2].bch;
hc->chan[ci - 2].bch = NULL;
spin_unlock_irqrestore(&hc->lock, flags);
mISDN_freebchannel(pb);
kfree(pb);
kfree(hc->chan[ci - 2].coeff);
spin_lock_irqsave(&hc->lock, flags);
}
if (hc->chan[ci - 1].bch) {
if (debug & DEBUG_HFCMULTI_INIT)
printk(KERN_DEBUG
"%s: free port %d channel %d\n",
__func__, hc->chan[ci - 1].port+1,
ci - 1);
pb = hc->chan[ci - 1].bch;
hc->chan[ci - 1].bch = NULL;
spin_unlock_irqrestore(&hc->lock, flags);
mISDN_freebchannel(pb);
kfree(pb);
kfree(hc->chan[ci - 1].coeff);
spin_lock_irqsave(&hc->lock, flags);
}
}
spin_unlock_irqrestore(&hc->lock, flags);
if (debug & DEBUG_HFCMULTI_INIT)
printk(KERN_DEBUG "%s: free port %d channel D\n", __func__, pt);
mISDN_freedchannel(dch);
kfree(dch);
if (debug & DEBUG_HFCMULTI_INIT)
printk(KERN_DEBUG "%s: done!\n", __func__);
}
static void
release_card(struct hfc_multi *hc)
{
u_long flags;
int ch;
if (debug & DEBUG_HFCMULTI_INIT)
printk(KERN_WARNING "%s: release card (%d) entered\n",
__func__, hc->id);
/* unregister clock source */
if (hc->iclock)
mISDN_unregister_clock(hc->iclock);
/* disable irq */
spin_lock_irqsave(&hc->lock, flags);
disable_hwirq(hc);
spin_unlock_irqrestore(&hc->lock, flags);
udelay(1000);
/* dimm leds */
if (hc->leds)
hfcmulti_leds(hc);
/* disable D-channels & B-channels */
if (debug & DEBUG_HFCMULTI_INIT)
printk(KERN_DEBUG "%s: disable all channels (d and b)\n",
__func__);
for (ch = 0; ch <= 31; ch++) {
if (hc->chan[ch].dch)
release_port(hc, hc->chan[ch].dch);
}
/* release hardware & irq */
if (hc->irq) {
if (debug & DEBUG_HFCMULTI_INIT)
printk(KERN_WARNING "%s: free irq %d\n",
__func__, hc->irq);
free_irq(hc->irq, hc);
hc->irq = 0;
}
release_io_hfcmulti(hc);
if (debug & DEBUG_HFCMULTI_INIT)
printk(KERN_WARNING "%s: remove instance from list\n",
__func__);
list_del(&hc->list);
if (debug & DEBUG_HFCMULTI_INIT)
printk(KERN_WARNING "%s: delete instance\n", __func__);
if (hc == syncmaster)
syncmaster = NULL;
kfree(hc);
if (debug & DEBUG_HFCMULTI_INIT)
printk(KERN_WARNING "%s: card successfully removed\n",
__func__);
}
static int
init_e1_port(struct hfc_multi *hc, struct hm_map *m)
{
struct dchannel *dch;
struct bchannel *bch;
int ch, ret = 0;
char name[MISDN_MAX_IDLEN];
dch = kzalloc(sizeof(struct dchannel), GFP_KERNEL);
if (!dch)
return -ENOMEM;
dch->debug = debug;
mISDN_initdchannel(dch, MAX_DFRAME_LEN_L1, ph_state_change);
dch->hw = hc;
dch->dev.Dprotocols = (1 << ISDN_P_TE_E1) | (1 << ISDN_P_NT_E1);
dch->dev.Bprotocols = (1 << (ISDN_P_B_RAW & ISDN_P_B_MASK)) |
(1 << (ISDN_P_B_HDLC & ISDN_P_B_MASK));
dch->dev.D.send = handle_dmsg;
dch->dev.D.ctrl = hfcm_dctrl;
dch->dev.nrbchan = (hc->dslot)?30:31;
dch->slot = hc->dslot;
hc->chan[hc->dslot].dch = dch;
hc->chan[hc->dslot].port = 0;
hc->chan[hc->dslot].nt_timer = -1;
for (ch = 1; ch <= 31; ch++) {
if (ch == hc->dslot) /* skip dchannel */
continue;
bch = kzalloc(sizeof(struct bchannel), GFP_KERNEL);
if (!bch) {
printk(KERN_ERR "%s: no memory for bchannel\n",
__func__);
ret = -ENOMEM;
goto free_chan;
}
hc->chan[ch].coeff = kzalloc(512, GFP_KERNEL);
if (!hc->chan[ch].coeff) {
printk(KERN_ERR "%s: no memory for coeffs\n",
__func__);
ret = -ENOMEM;
goto free_chan;
}
bch->nr = ch;
bch->slot = ch;
bch->debug = debug;
mISDN_initbchannel(bch, MAX_DATA_MEM);
bch->hw = hc;
bch->ch.send = handle_bmsg;
bch->ch.ctrl = hfcm_bctrl;
bch->ch.nr = ch;
list_add(&bch->ch.list, &dch->dev.bchannels);
hc->chan[ch].bch = bch;
hc->chan[ch].port = 0;
set_channelmap(bch->nr, dch->dev.channelmap);
}
/* set optical line type */
if (port[Port_cnt] & 0x001) {
if (!m->opticalsupport) {
printk(KERN_INFO
"This board has no optical "
"support\n");
} else {
if (debug & DEBUG_HFCMULTI_INIT)
printk(KERN_DEBUG
"%s: PORT set optical "
"interfacs: card(%d) "
"port(%d)\n",
__func__,
HFC_cnt + 1, 1);
test_and_set_bit(HFC_CFG_OPTICAL,
&hc->chan[hc->dslot].cfg);
}
}
/* set LOS report */
if (port[Port_cnt] & 0x004) {
if (debug & DEBUG_HFCMULTI_INIT)
printk(KERN_DEBUG "%s: PORT set "
"LOS report: card(%d) port(%d)\n",
__func__, HFC_cnt + 1, 1);
test_and_set_bit(HFC_CFG_REPORT_LOS,
&hc->chan[hc->dslot].cfg);
}
/* set AIS report */
if (port[Port_cnt] & 0x008) {
if (debug & DEBUG_HFCMULTI_INIT)
printk(KERN_DEBUG "%s: PORT set "
"AIS report: card(%d) port(%d)\n",
__func__, HFC_cnt + 1, 1);
test_and_set_bit(HFC_CFG_REPORT_AIS,
&hc->chan[hc->dslot].cfg);
}
/* set SLIP report */
if (port[Port_cnt] & 0x010) {
if (debug & DEBUG_HFCMULTI_INIT)
printk(KERN_DEBUG
"%s: PORT set SLIP report: "
"card(%d) port(%d)\n",
__func__, HFC_cnt + 1, 1);
test_and_set_bit(HFC_CFG_REPORT_SLIP,
&hc->chan[hc->dslot].cfg);
}
/* set RDI report */
if (port[Port_cnt] & 0x020) {
if (debug & DEBUG_HFCMULTI_INIT)
printk(KERN_DEBUG
"%s: PORT set RDI report: "
"card(%d) port(%d)\n",
__func__, HFC_cnt + 1, 1);
test_and_set_bit(HFC_CFG_REPORT_RDI,
&hc->chan[hc->dslot].cfg);
}
/* set CRC-4 Mode */
if (!(port[Port_cnt] & 0x100)) {
if (debug & DEBUG_HFCMULTI_INIT)
printk(KERN_DEBUG "%s: PORT turn on CRC4 report:"
" card(%d) port(%d)\n",
__func__, HFC_cnt + 1, 1);
test_and_set_bit(HFC_CFG_CRC4,
&hc->chan[hc->dslot].cfg);
} else {
if (debug & DEBUG_HFCMULTI_INIT)
printk(KERN_DEBUG "%s: PORT turn off CRC4"
" report: card(%d) port(%d)\n",
__func__, HFC_cnt + 1, 1);
}
/* set forced clock */
if (port[Port_cnt] & 0x0200) {
if (debug & DEBUG_HFCMULTI_INIT)
printk(KERN_DEBUG "%s: PORT force getting clock from "
"E1: card(%d) port(%d)\n",
__func__, HFC_cnt + 1, 1);
test_and_set_bit(HFC_CHIP_E1CLOCK_GET, &hc->chip);
} else
if (port[Port_cnt] & 0x0400) {
if (debug & DEBUG_HFCMULTI_INIT)
printk(KERN_DEBUG "%s: PORT force putting clock to "
"E1: card(%d) port(%d)\n",
__func__, HFC_cnt + 1, 1);
test_and_set_bit(HFC_CHIP_E1CLOCK_PUT, &hc->chip);
}
/* set JATT PLL */
if (port[Port_cnt] & 0x0800) {
if (debug & DEBUG_HFCMULTI_INIT)
printk(KERN_DEBUG "%s: PORT disable JATT PLL on "
"E1: card(%d) port(%d)\n",
__func__, HFC_cnt + 1, 1);
test_and_set_bit(HFC_CHIP_RX_SYNC, &hc->chip);
}
/* set elastic jitter buffer */
if (port[Port_cnt] & 0x3000) {
hc->chan[hc->dslot].jitter = (port[Port_cnt]>>12) & 0x3;
if (debug & DEBUG_HFCMULTI_INIT)
printk(KERN_DEBUG
"%s: PORT set elastic "
"buffer to %d: card(%d) port(%d)\n",
__func__, hc->chan[hc->dslot].jitter,
HFC_cnt + 1, 1);
} else
hc->chan[hc->dslot].jitter = 2; /* default */
snprintf(name, MISDN_MAX_IDLEN - 1, "hfc-e1.%d", HFC_cnt + 1);
ret = mISDN_register_device(&dch->dev, &hc->pci_dev->dev, name);
if (ret)
goto free_chan;
hc->created[0] = 1;
return ret;
free_chan:
release_port(hc, dch);
return ret;
}
static int
init_multi_port(struct hfc_multi *hc, int pt)
{
struct dchannel *dch;
struct bchannel *bch;
int ch, i, ret = 0;
char name[MISDN_MAX_IDLEN];
dch = kzalloc(sizeof(struct dchannel), GFP_KERNEL);
if (!dch)
return -ENOMEM;
dch->debug = debug;
mISDN_initdchannel(dch, MAX_DFRAME_LEN_L1, ph_state_change);
dch->hw = hc;
dch->dev.Dprotocols = (1 << ISDN_P_TE_S0) | (1 << ISDN_P_NT_S0);
dch->dev.Bprotocols = (1 << (ISDN_P_B_RAW & ISDN_P_B_MASK)) |
(1 << (ISDN_P_B_HDLC & ISDN_P_B_MASK));
dch->dev.D.send = handle_dmsg;
dch->dev.D.ctrl = hfcm_dctrl;
dch->dev.nrbchan = 2;
i = pt << 2;
dch->slot = i + 2;
hc->chan[i + 2].dch = dch;
hc->chan[i + 2].port = pt;
hc->chan[i + 2].nt_timer = -1;
for (ch = 0; ch < dch->dev.nrbchan; ch++) {
bch = kzalloc(sizeof(struct bchannel), GFP_KERNEL);
if (!bch) {
printk(KERN_ERR "%s: no memory for bchannel\n",
__func__);
ret = -ENOMEM;
goto free_chan;
}
hc->chan[i + ch].coeff = kzalloc(512, GFP_KERNEL);
if (!hc->chan[i + ch].coeff) {
printk(KERN_ERR "%s: no memory for coeffs\n",
__func__);
ret = -ENOMEM;
goto free_chan;
}
bch->nr = ch + 1;
bch->slot = i + ch;
bch->debug = debug;
mISDN_initbchannel(bch, MAX_DATA_MEM);
bch->hw = hc;
bch->ch.send = handle_bmsg;
bch->ch.ctrl = hfcm_bctrl;
bch->ch.nr = ch + 1;
list_add(&bch->ch.list, &dch->dev.bchannels);
hc->chan[i + ch].bch = bch;
hc->chan[i + ch].port = pt;
set_channelmap(bch->nr, dch->dev.channelmap);
}
/* set master clock */
if (port[Port_cnt] & 0x001) {
if (debug & DEBUG_HFCMULTI_INIT)
printk(KERN_DEBUG
"%s: PROTOCOL set master clock: "
"card(%d) port(%d)\n",
__func__, HFC_cnt + 1, pt + 1);
if (dch->dev.D.protocol != ISDN_P_TE_S0) {
printk(KERN_ERR "Error: Master clock "
"for port(%d) of card(%d) is only"
" possible with TE-mode\n",
pt + 1, HFC_cnt + 1);
ret = -EINVAL;
goto free_chan;
}
if (hc->masterclk >= 0) {
printk(KERN_ERR "Error: Master clock "
"for port(%d) of card(%d) already "
"defined for port(%d)\n",
pt + 1, HFC_cnt + 1, hc->masterclk+1);
ret = -EINVAL;
goto free_chan;
}
hc->masterclk = pt;
}
/* set transmitter line to non capacitive */
if (port[Port_cnt] & 0x002) {
if (debug & DEBUG_HFCMULTI_INIT)
printk(KERN_DEBUG
"%s: PROTOCOL set non capacitive "
"transmitter: card(%d) port(%d)\n",
__func__, HFC_cnt + 1, pt + 1);
test_and_set_bit(HFC_CFG_NONCAP_TX,
&hc->chan[i + 2].cfg);
}
/* disable E-channel */
if (port[Port_cnt] & 0x004) {
if (debug & DEBUG_HFCMULTI_INIT)
printk(KERN_DEBUG
"%s: PROTOCOL disable E-channel: "
"card(%d) port(%d)\n",
__func__, HFC_cnt + 1, pt + 1);
test_and_set_bit(HFC_CFG_DIS_ECHANNEL,
&hc->chan[i + 2].cfg);
}
snprintf(name, MISDN_MAX_IDLEN - 1, "hfc-%ds.%d-%d",
hc->type, HFC_cnt + 1, pt + 1);
ret = mISDN_register_device(&dch->dev, &hc->pci_dev->dev, name);
if (ret)
goto free_chan;
hc->created[pt] = 1;
return ret;
free_chan:
release_port(hc, dch);
return ret;
}
static int
hfcmulti_init(struct pci_dev *pdev, const struct pci_device_id *ent)
{
struct hm_map *m = (struct hm_map *)ent->driver_data;
int ret_err = 0;
int pt;
struct hfc_multi *hc;
u_long flags;
u_char dips = 0, pmj = 0; /* dip settings, port mode Jumpers */
int i;
if (HFC_cnt >= MAX_CARDS) {
printk(KERN_ERR "too many cards (max=%d).\n",
MAX_CARDS);
return -EINVAL;
}
if ((type[HFC_cnt] & 0xff) && (type[HFC_cnt] & 0xff) != m->type) {
printk(KERN_WARNING "HFC-MULTI: Card '%s:%s' type %d found but "
"type[%d] %d was supplied as module parameter\n",
m->vendor_name, m->card_name, m->type, HFC_cnt,
type[HFC_cnt] & 0xff);
printk(KERN_WARNING "HFC-MULTI: Load module without parameters "
"first, to see cards and their types.");
return -EINVAL;
}
if (debug & DEBUG_HFCMULTI_INIT)
printk(KERN_DEBUG "%s: Registering %s:%s chip type %d (0x%x)\n",
__func__, m->vendor_name, m->card_name, m->type,
type[HFC_cnt]);
/* allocate card+fifo structure */
hc = kzalloc(sizeof(struct hfc_multi), GFP_KERNEL);
if (!hc) {
printk(KERN_ERR "No kmem for HFC-Multi card\n");
return -ENOMEM;
}
spin_lock_init(&hc->lock);
hc->mtyp = m;
hc->type = m->type;
hc->ports = m->ports;
hc->id = HFC_cnt;
hc->pcm = pcm[HFC_cnt];
hc->io_mode = iomode[HFC_cnt];
if (dslot[HFC_cnt] < 0 && hc->type == 1) {
hc->dslot = 0;
printk(KERN_INFO "HFC-E1 card has disabled D-channel, but "
"31 B-channels\n");
} if (dslot[HFC_cnt] > 0 && dslot[HFC_cnt] < 32 && hc->type == 1) {
hc->dslot = dslot[HFC_cnt];
printk(KERN_INFO "HFC-E1 card has alternating D-channel on "
"time slot %d\n", dslot[HFC_cnt]);
} else
hc->dslot = 16;
/* set chip specific features */
hc->masterclk = -1;
if (type[HFC_cnt] & 0x100) {
test_and_set_bit(HFC_CHIP_ULAW, &hc->chip);
hc->silence = 0xff; /* ulaw silence */
} else
hc->silence = 0x2a; /* alaw silence */
if ((poll >> 1) > sizeof(hc->silence_data)) {
printk(KERN_ERR "HFCMULTI error: silence_data too small, "
"please fix\n");
return -EINVAL;
}
for (i = 0; i < (poll >> 1); i++)
hc->silence_data[i] = hc->silence;
if (!(type[HFC_cnt] & 0x200))
test_and_set_bit(HFC_CHIP_DTMF, &hc->chip);
if (type[HFC_cnt] & 0x800)
test_and_set_bit(HFC_CHIP_PCM_SLAVE, &hc->chip);
if (type[HFC_cnt] & 0x1000) {
test_and_set_bit(HFC_CHIP_PCM_MASTER, &hc->chip);
test_and_clear_bit(HFC_CHIP_PCM_SLAVE, &hc->chip);
}
if (type[HFC_cnt] & 0x4000)
test_and_set_bit(HFC_CHIP_EXRAM_128, &hc->chip);
if (type[HFC_cnt] & 0x8000)
test_and_set_bit(HFC_CHIP_EXRAM_512, &hc->chip);
hc->slots = 32;
if (type[HFC_cnt] & 0x10000)
hc->slots = 64;
if (type[HFC_cnt] & 0x20000)
hc->slots = 128;
if (type[HFC_cnt] & 0x80000) {
test_and_set_bit(HFC_CHIP_WATCHDOG, &hc->chip);
hc->wdcount = 0;
hc->wdbyte = V_GPIO_OUT2;
printk(KERN_NOTICE "Watchdog enabled\n");
}
/* setup pci, hc->slots may change due to PLXSD */
ret_err = setup_pci(hc, pdev, ent);
if (ret_err) {
if (hc == syncmaster)
syncmaster = NULL;
kfree(hc);
return ret_err;
}
/* crate channels */
for (pt = 0; pt < hc->ports; pt++) {
if (Port_cnt >= MAX_PORTS) {
printk(KERN_ERR "too many ports (max=%d).\n",
MAX_PORTS);
ret_err = -EINVAL;
goto free_card;
}
if (hc->type == 1)
ret_err = init_e1_port(hc, m);
else
ret_err = init_multi_port(hc, pt);
if (debug & DEBUG_HFCMULTI_INIT)
printk(KERN_DEBUG
"%s: Registering D-channel, card(%d) port(%d)"
"result %d\n",
__func__, HFC_cnt + 1, pt, ret_err);
if (ret_err) {
while (pt) { /* release already registered ports */
pt--;
release_port(hc, hc->chan[(pt << 2) + 2].dch);
}
goto free_card;
}
Port_cnt++;
}
/* disp switches */
switch (m->dip_type) {
case DIP_4S:
/*
* Get DIP setting for beroNet 1S/2S/4S cards
* DIP Setting: (collect GPIO 13/14/15 (R_GPIO_IN1) +
* GPI 19/23 (R_GPI_IN2))
*/
dips = ((~HFC_inb(hc, R_GPIO_IN1) & 0xE0) >> 5) |
((~HFC_inb(hc, R_GPI_IN2) & 0x80) >> 3) |
(~HFC_inb(hc, R_GPI_IN2) & 0x08);
/* Port mode (TE/NT) jumpers */
pmj = ((HFC_inb(hc, R_GPI_IN3) >> 4) & 0xf);
if (test_bit(HFC_CHIP_B410P, &hc->chip))
pmj = ~pmj & 0xf;
printk(KERN_INFO "%s: %s DIPs(0x%x) jumpers(0x%x)\n",
m->vendor_name, m->card_name, dips, pmj);
break;
case DIP_8S:
/*
* Get DIP Setting for beroNet 8S0+ cards
* Enable PCI auxbridge function
*/
HFC_outb(hc, R_BRG_PCM_CFG, 1 | V_PCM_CLK);
/* prepare access to auxport */
outw(0x4000, hc->pci_iobase + 4);
/*
* some dummy reads are required to
* read valid DIP switch data
*/
dips = inb(hc->pci_iobase);
dips = inb(hc->pci_iobase);
dips = inb(hc->pci_iobase);
dips = ~inb(hc->pci_iobase) & 0x3F;
outw(0x0, hc->pci_iobase + 4);
/* disable PCI auxbridge function */
HFC_outb(hc, R_BRG_PCM_CFG, V_PCM_CLK);
printk(KERN_INFO "%s: %s DIPs(0x%x)\n",
m->vendor_name, m->card_name, dips);
break;
case DIP_E1:
/*
* get DIP Setting for beroNet E1 cards
* DIP Setting: collect GPI 4/5/6/7 (R_GPI_IN0)
*/
dips = (~HFC_inb(hc, R_GPI_IN0) & 0xF0)>>4;
printk(KERN_INFO "%s: %s DIPs(0x%x)\n",
m->vendor_name, m->card_name, dips);
break;
}
/* add to list */
spin_lock_irqsave(&HFClock, flags);
list_add_tail(&hc->list, &HFClist);
spin_unlock_irqrestore(&HFClock, flags);
/* use as clock source */
if (clock == HFC_cnt + 1)
hc->iclock = mISDN_register_clock("HFCMulti", 0, clockctl, hc);
/* initialize hardware */
ret_err = init_card(hc);
if (ret_err) {
printk(KERN_ERR "init card returns %d\n", ret_err);
release_card(hc);
return ret_err;
}
/* start IRQ and return */
spin_lock_irqsave(&hc->lock, flags);
enable_hwirq(hc);
spin_unlock_irqrestore(&hc->lock, flags);
return 0;
free_card:
release_io_hfcmulti(hc);
if (hc == syncmaster)
syncmaster = NULL;
kfree(hc);
return ret_err;
}
static void __devexit hfc_remove_pci(struct pci_dev *pdev)
{
struct hfc_multi *card = pci_get_drvdata(pdev);
u_long flags;
if (debug)
printk(KERN_INFO "removing hfc_multi card vendor:%x "
"device:%x subvendor:%x subdevice:%x\n",
pdev->vendor, pdev->device,
pdev->subsystem_vendor, pdev->subsystem_device);
if (card) {
spin_lock_irqsave(&HFClock, flags);
release_card(card);
spin_unlock_irqrestore(&HFClock, flags);
} else {
if (debug)
printk(KERN_WARNING "%s: drvdata allready removed\n",
__func__);
}
}
#define VENDOR_CCD "Cologne Chip AG"
#define VENDOR_BN "beroNet GmbH"
#define VENDOR_DIG "Digium Inc."
#define VENDOR_JH "Junghanns.NET GmbH"
#define VENDOR_PRIM "PrimuX"
static const struct hm_map hfcm_map[] = {
/*0*/ {VENDOR_BN, "HFC-1S Card (mini PCI)", 4, 1, 1, 3, 0, DIP_4S, 0},
/*1*/ {VENDOR_BN, "HFC-2S Card", 4, 2, 1, 3, 0, DIP_4S, 0},
/*2*/ {VENDOR_BN, "HFC-2S Card (mini PCI)", 4, 2, 1, 3, 0, DIP_4S, 0},
/*3*/ {VENDOR_BN, "HFC-4S Card", 4, 4, 1, 2, 0, DIP_4S, 0},
/*4*/ {VENDOR_BN, "HFC-4S Card (mini PCI)", 4, 4, 1, 2, 0, 0, 0},
/*5*/ {VENDOR_CCD, "HFC-4S Eval (old)", 4, 4, 0, 0, 0, 0, 0},
/*6*/ {VENDOR_CCD, "HFC-4S IOB4ST", 4, 4, 1, 2, 0, DIP_4S, 0},
/*7*/ {VENDOR_CCD, "HFC-4S", 4, 4, 1, 2, 0, 0, 0},
/*8*/ {VENDOR_DIG, "HFC-4S Card", 4, 4, 0, 2, 0, 0, HFC_IO_MODE_REGIO},
/*9*/ {VENDOR_CCD, "HFC-4S Swyx 4xS0 SX2 QuadBri", 4, 4, 1, 2, 0, 0, 0},
/*10*/ {VENDOR_JH, "HFC-4S (junghanns 2.0)", 4, 4, 1, 2, 0, 0, 0},
/*11*/ {VENDOR_PRIM, "HFC-2S Primux Card", 4, 2, 0, 0, 0, 0, 0},
/*12*/ {VENDOR_BN, "HFC-8S Card", 8, 8, 1, 0, 0, 0, 0},
/*13*/ {VENDOR_BN, "HFC-8S Card (+)", 8, 8, 1, 8, 0, DIP_8S,
HFC_IO_MODE_REGIO},
/*14*/ {VENDOR_CCD, "HFC-8S Eval (old)", 8, 8, 0, 0, 0, 0, 0},
/*15*/ {VENDOR_CCD, "HFC-8S IOB4ST Recording", 8, 8, 1, 0, 0, 0, 0},
/*16*/ {VENDOR_CCD, "HFC-8S IOB8ST", 8, 8, 1, 0, 0, 0, 0},
/*17*/ {VENDOR_CCD, "HFC-8S", 8, 8, 1, 0, 0, 0, 0},
/*18*/ {VENDOR_CCD, "HFC-8S", 8, 8, 1, 0, 0, 0, 0},
/*19*/ {VENDOR_BN, "HFC-E1 Card", 1, 1, 0, 1, 0, DIP_E1, 0},
/*20*/ {VENDOR_BN, "HFC-E1 Card (mini PCI)", 1, 1, 0, 1, 0, 0, 0},
/*21*/ {VENDOR_BN, "HFC-E1+ Card (Dual)", 1, 1, 0, 1, 0, DIP_E1, 0},
/*22*/ {VENDOR_BN, "HFC-E1 Card (Dual)", 1, 1, 0, 1, 0, DIP_E1, 0},
/*23*/ {VENDOR_CCD, "HFC-E1 Eval (old)", 1, 1, 0, 0, 0, 0, 0},
/*24*/ {VENDOR_CCD, "HFC-E1 IOB1E1", 1, 1, 0, 1, 0, 0, 0},
/*25*/ {VENDOR_CCD, "HFC-E1", 1, 1, 0, 1, 0, 0, 0},
/*26*/ {VENDOR_CCD, "HFC-4S Speech Design", 4, 4, 0, 0, 0, 0,
HFC_IO_MODE_PLXSD},
/*27*/ {VENDOR_CCD, "HFC-E1 Speech Design", 1, 1, 0, 0, 0, 0,
HFC_IO_MODE_PLXSD},
/*28*/ {VENDOR_CCD, "HFC-4S OpenVox", 4, 4, 1, 0, 0, 0, 0},
/*29*/ {VENDOR_CCD, "HFC-2S OpenVox", 4, 2, 1, 0, 0, 0, 0},
/*30*/ {VENDOR_CCD, "HFC-8S OpenVox", 8, 8, 1, 0, 0, 0, 0},
};
#undef H
#define H(x) ((unsigned long)&hfcm_map[x])
static struct pci_device_id hfmultipci_ids[] __devinitdata = {
/* Cards with HFC-4S Chip */
{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
PCI_SUBDEVICE_ID_CCD_BN1SM, 0, 0, H(0)}, /* BN1S mini PCI */
{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
PCI_SUBDEVICE_ID_CCD_BN2S, 0, 0, H(1)}, /* BN2S */
{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
PCI_SUBDEVICE_ID_CCD_BN2SM, 0, 0, H(2)}, /* BN2S mini PCI */
{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
PCI_SUBDEVICE_ID_CCD_BN4S, 0, 0, H(3)}, /* BN4S */
{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
PCI_SUBDEVICE_ID_CCD_BN4SM, 0, 0, H(4)}, /* BN4S mini PCI */
{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
PCI_DEVICE_ID_CCD_HFC4S, 0, 0, H(5)}, /* Old Eval */
{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
PCI_SUBDEVICE_ID_CCD_IOB4ST, 0, 0, H(6)}, /* IOB4ST */
{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
PCI_SUBDEVICE_ID_CCD_HFC4S, 0, 0, H(7)}, /* 4S */
{ PCI_VENDOR_ID_DIGIUM, PCI_DEVICE_ID_DIGIUM_HFC4S,
PCI_VENDOR_ID_DIGIUM, PCI_DEVICE_ID_DIGIUM_HFC4S, 0, 0, H(8)},
{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
PCI_SUBDEVICE_ID_CCD_SWYX4S, 0, 0, H(9)}, /* 4S Swyx */
{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
PCI_SUBDEVICE_ID_CCD_JH4S20, 0, 0, H(10)},
{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
PCI_SUBDEVICE_ID_CCD_PMX2S, 0, 0, H(11)}, /* Primux */
{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
PCI_SUBDEVICE_ID_CCD_OV4S, 0, 0, H(28)}, /* OpenVox 4 */
{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
PCI_SUBDEVICE_ID_CCD_OV2S, 0, 0, H(29)}, /* OpenVox 2 */
/* Cards with HFC-8S Chip */
{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD,
PCI_SUBDEVICE_ID_CCD_BN8S, 0, 0, H(12)}, /* BN8S */
{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD,
PCI_SUBDEVICE_ID_CCD_BN8SP, 0, 0, H(13)}, /* BN8S+ */
{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD,
PCI_DEVICE_ID_CCD_HFC8S, 0, 0, H(14)}, /* old Eval */
{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD,
PCI_SUBDEVICE_ID_CCD_IOB8STR, 0, 0, H(15)}, /* IOB8ST Recording */
{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD,
PCI_SUBDEVICE_ID_CCD_IOB8ST, 0, 0, H(16)}, /* IOB8ST */
{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD,
PCI_SUBDEVICE_ID_CCD_IOB8ST_1, 0, 0, H(17)}, /* IOB8ST */
{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD,
PCI_SUBDEVICE_ID_CCD_HFC8S, 0, 0, H(18)}, /* 8S */
{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD,
PCI_SUBDEVICE_ID_CCD_OV8S, 0, 0, H(30)}, /* OpenVox 8 */
/* Cards with HFC-E1 Chip */
{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFCE1, PCI_VENDOR_ID_CCD,
PCI_SUBDEVICE_ID_CCD_BNE1, 0, 0, H(19)}, /* BNE1 */
{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFCE1, PCI_VENDOR_ID_CCD,
PCI_SUBDEVICE_ID_CCD_BNE1M, 0, 0, H(20)}, /* BNE1 mini PCI */
{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFCE1, PCI_VENDOR_ID_CCD,
PCI_SUBDEVICE_ID_CCD_BNE1DP, 0, 0, H(21)}, /* BNE1 + (Dual) */
{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFCE1, PCI_VENDOR_ID_CCD,
PCI_SUBDEVICE_ID_CCD_BNE1D, 0, 0, H(22)}, /* BNE1 (Dual) */
{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFCE1, PCI_VENDOR_ID_CCD,
PCI_DEVICE_ID_CCD_HFCE1, 0, 0, H(23)}, /* Old Eval */
{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFCE1, PCI_VENDOR_ID_CCD,
PCI_SUBDEVICE_ID_CCD_IOB1E1, 0, 0, H(24)}, /* IOB1E1 */
{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFCE1, PCI_VENDOR_ID_CCD,
PCI_SUBDEVICE_ID_CCD_HFCE1, 0, 0, H(25)}, /* E1 */
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030, PCI_VENDOR_ID_CCD,
PCI_SUBDEVICE_ID_CCD_SPD4S, 0, 0, H(26)}, /* PLX PCI Bridge */
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030, PCI_VENDOR_ID_CCD,
PCI_SUBDEVICE_ID_CCD_SPDE1, 0, 0, H(27)}, /* PLX PCI Bridge */
{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_ANY_ID, PCI_ANY_ID,
0, 0, 0},
{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_ANY_ID, PCI_ANY_ID,
0, 0, 0},
{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFCE1, PCI_ANY_ID, PCI_ANY_ID,
0, 0, 0},
{0, }
};
#undef H
MODULE_DEVICE_TABLE(pci, hfmultipci_ids);
static int
hfcmulti_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
{
struct hm_map *m = (struct hm_map *)ent->driver_data;
int ret;
if (m == NULL && ent->vendor == PCI_VENDOR_ID_CCD && (
ent->device == PCI_DEVICE_ID_CCD_HFC4S ||
ent->device == PCI_DEVICE_ID_CCD_HFC8S ||
ent->device == PCI_DEVICE_ID_CCD_HFCE1)) {
printk(KERN_ERR
"Unknown HFC multiport controller (vendor:%x device:%x "
"subvendor:%x subdevice:%x)\n", ent->vendor, ent->device,
ent->subvendor, ent->subdevice);
printk(KERN_ERR
"Please contact the driver maintainer for support.\n");
return -ENODEV;
}
ret = hfcmulti_init(pdev, ent);
if (ret)
return ret;
HFC_cnt++;
printk(KERN_INFO "%d devices registered\n", HFC_cnt);
return 0;
}
static struct pci_driver hfcmultipci_driver = {
.name = "hfc_multi",
.probe = hfcmulti_probe,
.remove = __devexit_p(hfc_remove_pci),
.id_table = hfmultipci_ids,
};
static void __exit
HFCmulti_cleanup(void)
{
struct hfc_multi *card, *next;
/* get rid of all devices of this driver */
list_for_each_entry_safe(card, next, &HFClist, list)
release_card(card);
pci_unregister_driver(&hfcmultipci_driver);
}
static int __init
HFCmulti_init(void)
{
int err;
printk(KERN_INFO "mISDN: HFC-multi driver %s\n", HFC_MULTI_VERSION);
#ifdef IRQ_DEBUG
printk(KERN_DEBUG "%s: IRQ_DEBUG IS ENABLED!\n", __func__);
#endif
spin_lock_init(&HFClock);
spin_lock_init(&plx_lock);
if (debug & DEBUG_HFCMULTI_INIT)
printk(KERN_DEBUG "%s: init entered\n", __func__);
switch (poll) {
case 0:
poll_timer = 6;
poll = 128;
break;
case 8:
poll_timer = 2;
break;
case 16:
poll_timer = 3;
break;
case 32:
poll_timer = 4;
break;
case 64:
poll_timer = 5;
break;
case 128:
poll_timer = 6;
break;
case 256:
poll_timer = 7;
break;
default:
printk(KERN_ERR
"%s: Wrong poll value (%d).\n", __func__, poll);
err = -EINVAL;
return err;
}
if (!clock)
clock = 1;
err = pci_register_driver(&hfcmultipci_driver);
if (err < 0) {
printk(KERN_ERR "error registering pci driver: %x\n", err);
return err;
}
return 0;
}
module_init(HFCmulti_init);
module_exit(HFCmulti_cleanup);