| /* CPU control. |
| * (C) 2001, 2002, 2003, 2004 Rusty Russell |
| * |
| * This code is licenced under the GPL. |
| */ |
| #include <linux/proc_fs.h> |
| #include <linux/smp.h> |
| #include <linux/init.h> |
| #include <linux/notifier.h> |
| #include <linux/sched.h> |
| #include <linux/unistd.h> |
| #include <linux/cpu.h> |
| #include <linux/oom.h> |
| #include <linux/rcupdate.h> |
| #include <linux/export.h> |
| #include <linux/bug.h> |
| #include <linux/kthread.h> |
| #include <linux/stop_machine.h> |
| #include <linux/mutex.h> |
| #include <linux/gfp.h> |
| #include <linux/suspend.h> |
| #include <linux/lockdep.h> |
| #include <linux/tick.h> |
| #include <linux/irq.h> |
| #include <linux/smpboot.h> |
| |
| #include <trace/events/power.h> |
| #define CREATE_TRACE_POINTS |
| #include <trace/events/cpuhp.h> |
| |
| #include "smpboot.h" |
| |
| /** |
| * cpuhp_cpu_state - Per cpu hotplug state storage |
| * @state: The current cpu state |
| * @target: The target state |
| * @thread: Pointer to the hotplug thread |
| * @should_run: Thread should execute |
| * @rollback: Perform a rollback |
| * @cb_stat: The state for a single callback (install/uninstall) |
| * @cb: Single callback function (install/uninstall) |
| * @result: Result of the operation |
| * @done: Signal completion to the issuer of the task |
| */ |
| struct cpuhp_cpu_state { |
| enum cpuhp_state state; |
| enum cpuhp_state target; |
| #ifdef CONFIG_SMP |
| struct task_struct *thread; |
| bool should_run; |
| bool rollback; |
| enum cpuhp_state cb_state; |
| int (*cb)(unsigned int cpu); |
| int result; |
| struct completion done; |
| #endif |
| }; |
| |
| static DEFINE_PER_CPU(struct cpuhp_cpu_state, cpuhp_state); |
| |
| /** |
| * cpuhp_step - Hotplug state machine step |
| * @name: Name of the step |
| * @startup: Startup function of the step |
| * @teardown: Teardown function of the step |
| * @skip_onerr: Do not invoke the functions on error rollback |
| * Will go away once the notifiers are gone |
| * @cant_stop: Bringup/teardown can't be stopped at this step |
| */ |
| struct cpuhp_step { |
| const char *name; |
| int (*startup)(unsigned int cpu); |
| int (*teardown)(unsigned int cpu); |
| bool skip_onerr; |
| bool cant_stop; |
| }; |
| |
| static DEFINE_MUTEX(cpuhp_state_mutex); |
| static struct cpuhp_step cpuhp_bp_states[]; |
| static struct cpuhp_step cpuhp_ap_states[]; |
| |
| /** |
| * cpuhp_invoke_callback _ Invoke the callbacks for a given state |
| * @cpu: The cpu for which the callback should be invoked |
| * @step: The step in the state machine |
| * @cb: The callback function to invoke |
| * |
| * Called from cpu hotplug and from the state register machinery |
| */ |
| static int cpuhp_invoke_callback(unsigned int cpu, enum cpuhp_state step, |
| int (*cb)(unsigned int)) |
| { |
| struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, cpu); |
| int ret = 0; |
| |
| if (cb) { |
| trace_cpuhp_enter(cpu, st->target, step, cb); |
| ret = cb(cpu); |
| trace_cpuhp_exit(cpu, st->state, step, ret); |
| } |
| return ret; |
| } |
| |
| #ifdef CONFIG_SMP |
| /* Serializes the updates to cpu_online_mask, cpu_present_mask */ |
| static DEFINE_MUTEX(cpu_add_remove_lock); |
| bool cpuhp_tasks_frozen; |
| EXPORT_SYMBOL_GPL(cpuhp_tasks_frozen); |
| |
| /* |
| * The following two APIs (cpu_maps_update_begin/done) must be used when |
| * attempting to serialize the updates to cpu_online_mask & cpu_present_mask. |
| * The APIs cpu_notifier_register_begin/done() must be used to protect CPU |
| * hotplug callback (un)registration performed using __register_cpu_notifier() |
| * or __unregister_cpu_notifier(). |
| */ |
| void cpu_maps_update_begin(void) |
| { |
| mutex_lock(&cpu_add_remove_lock); |
| } |
| EXPORT_SYMBOL(cpu_notifier_register_begin); |
| |
| void cpu_maps_update_done(void) |
| { |
| mutex_unlock(&cpu_add_remove_lock); |
| } |
| EXPORT_SYMBOL(cpu_notifier_register_done); |
| |
| static RAW_NOTIFIER_HEAD(cpu_chain); |
| |
| /* If set, cpu_up and cpu_down will return -EBUSY and do nothing. |
| * Should always be manipulated under cpu_add_remove_lock |
| */ |
| static int cpu_hotplug_disabled; |
| |
| #ifdef CONFIG_HOTPLUG_CPU |
| |
| static struct { |
| struct task_struct *active_writer; |
| /* wait queue to wake up the active_writer */ |
| wait_queue_head_t wq; |
| /* verifies that no writer will get active while readers are active */ |
| struct mutex lock; |
| /* |
| * Also blocks the new readers during |
| * an ongoing cpu hotplug operation. |
| */ |
| atomic_t refcount; |
| |
| #ifdef CONFIG_DEBUG_LOCK_ALLOC |
| struct lockdep_map dep_map; |
| #endif |
| } cpu_hotplug = { |
| .active_writer = NULL, |
| .wq = __WAIT_QUEUE_HEAD_INITIALIZER(cpu_hotplug.wq), |
| .lock = __MUTEX_INITIALIZER(cpu_hotplug.lock), |
| #ifdef CONFIG_DEBUG_LOCK_ALLOC |
| .dep_map = {.name = "cpu_hotplug.lock" }, |
| #endif |
| }; |
| |
| /* Lockdep annotations for get/put_online_cpus() and cpu_hotplug_begin/end() */ |
| #define cpuhp_lock_acquire_read() lock_map_acquire_read(&cpu_hotplug.dep_map) |
| #define cpuhp_lock_acquire_tryread() \ |
| lock_map_acquire_tryread(&cpu_hotplug.dep_map) |
| #define cpuhp_lock_acquire() lock_map_acquire(&cpu_hotplug.dep_map) |
| #define cpuhp_lock_release() lock_map_release(&cpu_hotplug.dep_map) |
| |
| |
| void get_online_cpus(void) |
| { |
| might_sleep(); |
| if (cpu_hotplug.active_writer == current) |
| return; |
| cpuhp_lock_acquire_read(); |
| mutex_lock(&cpu_hotplug.lock); |
| atomic_inc(&cpu_hotplug.refcount); |
| mutex_unlock(&cpu_hotplug.lock); |
| } |
| EXPORT_SYMBOL_GPL(get_online_cpus); |
| |
| void put_online_cpus(void) |
| { |
| int refcount; |
| |
| if (cpu_hotplug.active_writer == current) |
| return; |
| |
| refcount = atomic_dec_return(&cpu_hotplug.refcount); |
| if (WARN_ON(refcount < 0)) /* try to fix things up */ |
| atomic_inc(&cpu_hotplug.refcount); |
| |
| if (refcount <= 0 && waitqueue_active(&cpu_hotplug.wq)) |
| wake_up(&cpu_hotplug.wq); |
| |
| cpuhp_lock_release(); |
| |
| } |
| EXPORT_SYMBOL_GPL(put_online_cpus); |
| |
| /* |
| * This ensures that the hotplug operation can begin only when the |
| * refcount goes to zero. |
| * |
| * Note that during a cpu-hotplug operation, the new readers, if any, |
| * will be blocked by the cpu_hotplug.lock |
| * |
| * Since cpu_hotplug_begin() is always called after invoking |
| * cpu_maps_update_begin(), we can be sure that only one writer is active. |
| * |
| * Note that theoretically, there is a possibility of a livelock: |
| * - Refcount goes to zero, last reader wakes up the sleeping |
| * writer. |
| * - Last reader unlocks the cpu_hotplug.lock. |
| * - A new reader arrives at this moment, bumps up the refcount. |
| * - The writer acquires the cpu_hotplug.lock finds the refcount |
| * non zero and goes to sleep again. |
| * |
| * However, this is very difficult to achieve in practice since |
| * get_online_cpus() not an api which is called all that often. |
| * |
| */ |
| void cpu_hotplug_begin(void) |
| { |
| DEFINE_WAIT(wait); |
| |
| cpu_hotplug.active_writer = current; |
| cpuhp_lock_acquire(); |
| |
| for (;;) { |
| mutex_lock(&cpu_hotplug.lock); |
| prepare_to_wait(&cpu_hotplug.wq, &wait, TASK_UNINTERRUPTIBLE); |
| if (likely(!atomic_read(&cpu_hotplug.refcount))) |
| break; |
| mutex_unlock(&cpu_hotplug.lock); |
| schedule(); |
| } |
| finish_wait(&cpu_hotplug.wq, &wait); |
| } |
| |
| void cpu_hotplug_done(void) |
| { |
| cpu_hotplug.active_writer = NULL; |
| mutex_unlock(&cpu_hotplug.lock); |
| cpuhp_lock_release(); |
| } |
| |
| /* |
| * Wait for currently running CPU hotplug operations to complete (if any) and |
| * disable future CPU hotplug (from sysfs). The 'cpu_add_remove_lock' protects |
| * the 'cpu_hotplug_disabled' flag. The same lock is also acquired by the |
| * hotplug path before performing hotplug operations. So acquiring that lock |
| * guarantees mutual exclusion from any currently running hotplug operations. |
| */ |
| void cpu_hotplug_disable(void) |
| { |
| cpu_maps_update_begin(); |
| cpu_hotplug_disabled++; |
| cpu_maps_update_done(); |
| } |
| EXPORT_SYMBOL_GPL(cpu_hotplug_disable); |
| |
| void cpu_hotplug_enable(void) |
| { |
| cpu_maps_update_begin(); |
| WARN_ON(--cpu_hotplug_disabled < 0); |
| cpu_maps_update_done(); |
| } |
| EXPORT_SYMBOL_GPL(cpu_hotplug_enable); |
| #endif /* CONFIG_HOTPLUG_CPU */ |
| |
| /* Need to know about CPUs going up/down? */ |
| int register_cpu_notifier(struct notifier_block *nb) |
| { |
| int ret; |
| cpu_maps_update_begin(); |
| ret = raw_notifier_chain_register(&cpu_chain, nb); |
| cpu_maps_update_done(); |
| return ret; |
| } |
| |
| int __register_cpu_notifier(struct notifier_block *nb) |
| { |
| return raw_notifier_chain_register(&cpu_chain, nb); |
| } |
| |
| static int __cpu_notify(unsigned long val, unsigned int cpu, int nr_to_call, |
| int *nr_calls) |
| { |
| unsigned long mod = cpuhp_tasks_frozen ? CPU_TASKS_FROZEN : 0; |
| void *hcpu = (void *)(long)cpu; |
| |
| int ret; |
| |
| ret = __raw_notifier_call_chain(&cpu_chain, val | mod, hcpu, nr_to_call, |
| nr_calls); |
| |
| return notifier_to_errno(ret); |
| } |
| |
| static int cpu_notify(unsigned long val, unsigned int cpu) |
| { |
| return __cpu_notify(val, cpu, -1, NULL); |
| } |
| |
| static void cpu_notify_nofail(unsigned long val, unsigned int cpu) |
| { |
| BUG_ON(cpu_notify(val, cpu)); |
| } |
| |
| /* Notifier wrappers for transitioning to state machine */ |
| static int notify_prepare(unsigned int cpu) |
| { |
| int nr_calls = 0; |
| int ret; |
| |
| ret = __cpu_notify(CPU_UP_PREPARE, cpu, -1, &nr_calls); |
| if (ret) { |
| nr_calls--; |
| printk(KERN_WARNING "%s: attempt to bring up CPU %u failed\n", |
| __func__, cpu); |
| __cpu_notify(CPU_UP_CANCELED, cpu, nr_calls, NULL); |
| } |
| return ret; |
| } |
| |
| static int notify_online(unsigned int cpu) |
| { |
| cpu_notify(CPU_ONLINE, cpu); |
| return 0; |
| } |
| |
| static int notify_starting(unsigned int cpu) |
| { |
| cpu_notify(CPU_STARTING, cpu); |
| return 0; |
| } |
| |
| static int bringup_wait_for_ap(unsigned int cpu) |
| { |
| struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, cpu); |
| |
| wait_for_completion(&st->done); |
| return st->result; |
| } |
| |
| static int bringup_cpu(unsigned int cpu) |
| { |
| struct task_struct *idle = idle_thread_get(cpu); |
| int ret; |
| |
| /* Arch-specific enabling code. */ |
| ret = __cpu_up(cpu, idle); |
| if (ret) { |
| cpu_notify(CPU_UP_CANCELED, cpu); |
| return ret; |
| } |
| ret = bringup_wait_for_ap(cpu); |
| BUG_ON(!cpu_online(cpu)); |
| return ret; |
| } |
| |
| /* |
| * Hotplug state machine related functions |
| */ |
| static void undo_cpu_down(unsigned int cpu, struct cpuhp_cpu_state *st, |
| struct cpuhp_step *steps) |
| { |
| for (st->state++; st->state < st->target; st->state++) { |
| struct cpuhp_step *step = steps + st->state; |
| |
| if (!step->skip_onerr) |
| cpuhp_invoke_callback(cpu, st->state, step->startup); |
| } |
| } |
| |
| static int cpuhp_down_callbacks(unsigned int cpu, struct cpuhp_cpu_state *st, |
| struct cpuhp_step *steps, enum cpuhp_state target) |
| { |
| enum cpuhp_state prev_state = st->state; |
| int ret = 0; |
| |
| for (; st->state > target; st->state--) { |
| struct cpuhp_step *step = steps + st->state; |
| |
| ret = cpuhp_invoke_callback(cpu, st->state, step->teardown); |
| if (ret) { |
| st->target = prev_state; |
| undo_cpu_down(cpu, st, steps); |
| break; |
| } |
| } |
| return ret; |
| } |
| |
| static void undo_cpu_up(unsigned int cpu, struct cpuhp_cpu_state *st, |
| struct cpuhp_step *steps) |
| { |
| for (st->state--; st->state > st->target; st->state--) { |
| struct cpuhp_step *step = steps + st->state; |
| |
| if (!step->skip_onerr) |
| cpuhp_invoke_callback(cpu, st->state, step->teardown); |
| } |
| } |
| |
| static int cpuhp_up_callbacks(unsigned int cpu, struct cpuhp_cpu_state *st, |
| struct cpuhp_step *steps, enum cpuhp_state target) |
| { |
| enum cpuhp_state prev_state = st->state; |
| int ret = 0; |
| |
| while (st->state < target) { |
| struct cpuhp_step *step; |
| |
| st->state++; |
| step = steps + st->state; |
| ret = cpuhp_invoke_callback(cpu, st->state, step->startup); |
| if (ret) { |
| st->target = prev_state; |
| undo_cpu_up(cpu, st, steps); |
| break; |
| } |
| } |
| return ret; |
| } |
| |
| /* |
| * The cpu hotplug threads manage the bringup and teardown of the cpus |
| */ |
| static void cpuhp_create(unsigned int cpu) |
| { |
| struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, cpu); |
| |
| init_completion(&st->done); |
| } |
| |
| static int cpuhp_should_run(unsigned int cpu) |
| { |
| struct cpuhp_cpu_state *st = this_cpu_ptr(&cpuhp_state); |
| |
| return st->should_run; |
| } |
| |
| /* Execute the teardown callbacks. Used to be CPU_DOWN_PREPARE */ |
| static int cpuhp_ap_offline(unsigned int cpu, struct cpuhp_cpu_state *st) |
| { |
| enum cpuhp_state target = max((int)st->target, CPUHP_TEARDOWN_CPU); |
| |
| return cpuhp_down_callbacks(cpu, st, cpuhp_ap_states, target); |
| } |
| |
| /* Execute the online startup callbacks. Used to be CPU_ONLINE */ |
| static int cpuhp_ap_online(unsigned int cpu, struct cpuhp_cpu_state *st) |
| { |
| return cpuhp_up_callbacks(cpu, st, cpuhp_ap_states, st->target); |
| } |
| |
| /* |
| * Execute teardown/startup callbacks on the plugged cpu. Also used to invoke |
| * callbacks when a state gets [un]installed at runtime. |
| */ |
| static void cpuhp_thread_fun(unsigned int cpu) |
| { |
| struct cpuhp_cpu_state *st = this_cpu_ptr(&cpuhp_state); |
| int ret = 0; |
| |
| /* |
| * Paired with the mb() in cpuhp_kick_ap_work and |
| * cpuhp_invoke_ap_callback, so the work set is consistent visible. |
| */ |
| smp_mb(); |
| if (!st->should_run) |
| return; |
| |
| st->should_run = false; |
| |
| /* Single callback invocation for [un]install ? */ |
| if (st->cb) { |
| if (st->cb_state < CPUHP_AP_ONLINE) { |
| local_irq_disable(); |
| ret = cpuhp_invoke_callback(cpu, st->cb_state, st->cb); |
| local_irq_enable(); |
| } else { |
| ret = cpuhp_invoke_callback(cpu, st->cb_state, st->cb); |
| } |
| } else if (st->rollback) { |
| BUG_ON(st->state < CPUHP_AP_ONLINE_IDLE); |
| |
| undo_cpu_down(cpu, st, cpuhp_ap_states); |
| /* |
| * This is a momentary workaround to keep the notifier users |
| * happy. Will go away once we got rid of the notifiers. |
| */ |
| cpu_notify_nofail(CPU_DOWN_FAILED, cpu); |
| st->rollback = false; |
| } else { |
| /* Cannot happen .... */ |
| BUG_ON(st->state < CPUHP_AP_ONLINE_IDLE); |
| |
| /* Regular hotplug work */ |
| if (st->state < st->target) |
| ret = cpuhp_ap_online(cpu, st); |
| else if (st->state > st->target) |
| ret = cpuhp_ap_offline(cpu, st); |
| } |
| st->result = ret; |
| complete(&st->done); |
| } |
| |
| /* Invoke a single callback on a remote cpu */ |
| static int cpuhp_invoke_ap_callback(int cpu, enum cpuhp_state state, |
| int (*cb)(unsigned int)) |
| { |
| struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, cpu); |
| |
| if (!cpu_online(cpu)) |
| return 0; |
| |
| st->cb_state = state; |
| st->cb = cb; |
| /* |
| * Make sure the above stores are visible before should_run becomes |
| * true. Paired with the mb() above in cpuhp_thread_fun() |
| */ |
| smp_mb(); |
| st->should_run = true; |
| wake_up_process(st->thread); |
| wait_for_completion(&st->done); |
| return st->result; |
| } |
| |
| /* Regular hotplug invocation of the AP hotplug thread */ |
| static void __cpuhp_kick_ap_work(struct cpuhp_cpu_state *st) |
| { |
| st->result = 0; |
| st->cb = NULL; |
| /* |
| * Make sure the above stores are visible before should_run becomes |
| * true. Paired with the mb() above in cpuhp_thread_fun() |
| */ |
| smp_mb(); |
| st->should_run = true; |
| wake_up_process(st->thread); |
| } |
| |
| static int cpuhp_kick_ap_work(unsigned int cpu) |
| { |
| struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, cpu); |
| enum cpuhp_state state = st->state; |
| |
| trace_cpuhp_enter(cpu, st->target, state, cpuhp_kick_ap_work); |
| __cpuhp_kick_ap_work(st); |
| wait_for_completion(&st->done); |
| trace_cpuhp_exit(cpu, st->state, state, st->result); |
| return st->result; |
| } |
| |
| static struct smp_hotplug_thread cpuhp_threads = { |
| .store = &cpuhp_state.thread, |
| .create = &cpuhp_create, |
| .thread_should_run = cpuhp_should_run, |
| .thread_fn = cpuhp_thread_fun, |
| .thread_comm = "cpuhp/%u", |
| .selfparking = true, |
| }; |
| |
| void __init cpuhp_threads_init(void) |
| { |
| BUG_ON(smpboot_register_percpu_thread(&cpuhp_threads)); |
| kthread_unpark(this_cpu_read(cpuhp_state.thread)); |
| } |
| |
| #ifdef CONFIG_HOTPLUG_CPU |
| EXPORT_SYMBOL(register_cpu_notifier); |
| EXPORT_SYMBOL(__register_cpu_notifier); |
| void unregister_cpu_notifier(struct notifier_block *nb) |
| { |
| cpu_maps_update_begin(); |
| raw_notifier_chain_unregister(&cpu_chain, nb); |
| cpu_maps_update_done(); |
| } |
| EXPORT_SYMBOL(unregister_cpu_notifier); |
| |
| void __unregister_cpu_notifier(struct notifier_block *nb) |
| { |
| raw_notifier_chain_unregister(&cpu_chain, nb); |
| } |
| EXPORT_SYMBOL(__unregister_cpu_notifier); |
| |
| /** |
| * clear_tasks_mm_cpumask - Safely clear tasks' mm_cpumask for a CPU |
| * @cpu: a CPU id |
| * |
| * This function walks all processes, finds a valid mm struct for each one and |
| * then clears a corresponding bit in mm's cpumask. While this all sounds |
| * trivial, there are various non-obvious corner cases, which this function |
| * tries to solve in a safe manner. |
| * |
| * Also note that the function uses a somewhat relaxed locking scheme, so it may |
| * be called only for an already offlined CPU. |
| */ |
| void clear_tasks_mm_cpumask(int cpu) |
| { |
| struct task_struct *p; |
| |
| /* |
| * This function is called after the cpu is taken down and marked |
| * offline, so its not like new tasks will ever get this cpu set in |
| * their mm mask. -- Peter Zijlstra |
| * Thus, we may use rcu_read_lock() here, instead of grabbing |
| * full-fledged tasklist_lock. |
| */ |
| WARN_ON(cpu_online(cpu)); |
| rcu_read_lock(); |
| for_each_process(p) { |
| struct task_struct *t; |
| |
| /* |
| * Main thread might exit, but other threads may still have |
| * a valid mm. Find one. |
| */ |
| t = find_lock_task_mm(p); |
| if (!t) |
| continue; |
| cpumask_clear_cpu(cpu, mm_cpumask(t->mm)); |
| task_unlock(t); |
| } |
| rcu_read_unlock(); |
| } |
| |
| static inline void check_for_tasks(int dead_cpu) |
| { |
| struct task_struct *g, *p; |
| |
| read_lock(&tasklist_lock); |
| for_each_process_thread(g, p) { |
| if (!p->on_rq) |
| continue; |
| /* |
| * We do the check with unlocked task_rq(p)->lock. |
| * Order the reading to do not warn about a task, |
| * which was running on this cpu in the past, and |
| * it's just been woken on another cpu. |
| */ |
| rmb(); |
| if (task_cpu(p) != dead_cpu) |
| continue; |
| |
| pr_warn("Task %s (pid=%d) is on cpu %d (state=%ld, flags=%x)\n", |
| p->comm, task_pid_nr(p), dead_cpu, p->state, p->flags); |
| } |
| read_unlock(&tasklist_lock); |
| } |
| |
| static int notify_down_prepare(unsigned int cpu) |
| { |
| int err, nr_calls = 0; |
| |
| err = __cpu_notify(CPU_DOWN_PREPARE, cpu, -1, &nr_calls); |
| if (err) { |
| nr_calls--; |
| __cpu_notify(CPU_DOWN_FAILED, cpu, nr_calls, NULL); |
| pr_warn("%s: attempt to take down CPU %u failed\n", |
| __func__, cpu); |
| } |
| return err; |
| } |
| |
| static int notify_dying(unsigned int cpu) |
| { |
| cpu_notify(CPU_DYING, cpu); |
| return 0; |
| } |
| |
| /* Take this CPU down. */ |
| static int take_cpu_down(void *_param) |
| { |
| struct cpuhp_cpu_state *st = this_cpu_ptr(&cpuhp_state); |
| enum cpuhp_state target = max((int)st->target, CPUHP_AP_OFFLINE); |
| int err, cpu = smp_processor_id(); |
| |
| /* Ensure this CPU doesn't handle any more interrupts. */ |
| err = __cpu_disable(); |
| if (err < 0) |
| return err; |
| |
| /* Invoke the former CPU_DYING callbacks */ |
| for (; st->state > target; st->state--) { |
| struct cpuhp_step *step = cpuhp_ap_states + st->state; |
| |
| cpuhp_invoke_callback(cpu, st->state, step->teardown); |
| } |
| /* Give up timekeeping duties */ |
| tick_handover_do_timer(); |
| /* Park the stopper thread */ |
| stop_machine_park(cpu); |
| return 0; |
| } |
| |
| static int takedown_cpu(unsigned int cpu) |
| { |
| struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, cpu); |
| int err; |
| |
| /* Park the smpboot threads */ |
| kthread_park(per_cpu_ptr(&cpuhp_state, cpu)->thread); |
| smpboot_park_threads(cpu); |
| |
| /* |
| * Prevent irq alloc/free while the dying cpu reorganizes the |
| * interrupt affinities. |
| */ |
| irq_lock_sparse(); |
| |
| /* |
| * So now all preempt/rcu users must observe !cpu_active(). |
| */ |
| err = stop_machine(take_cpu_down, NULL, cpumask_of(cpu)); |
| if (err) { |
| /* CPU refused to die */ |
| irq_unlock_sparse(); |
| /* Unpark the hotplug thread so we can rollback there */ |
| kthread_unpark(per_cpu_ptr(&cpuhp_state, cpu)->thread); |
| return err; |
| } |
| BUG_ON(cpu_online(cpu)); |
| |
| /* |
| * The migration_call() CPU_DYING callback will have removed all |
| * runnable tasks from the cpu, there's only the idle task left now |
| * that the migration thread is done doing the stop_machine thing. |
| * |
| * Wait for the stop thread to go away. |
| */ |
| wait_for_completion(&st->done); |
| BUG_ON(st->state != CPUHP_AP_IDLE_DEAD); |
| |
| /* Interrupts are moved away from the dying cpu, reenable alloc/free */ |
| irq_unlock_sparse(); |
| |
| hotplug_cpu__broadcast_tick_pull(cpu); |
| /* This actually kills the CPU. */ |
| __cpu_die(cpu); |
| |
| tick_cleanup_dead_cpu(cpu); |
| return 0; |
| } |
| |
| static int notify_dead(unsigned int cpu) |
| { |
| cpu_notify_nofail(CPU_DEAD, cpu); |
| check_for_tasks(cpu); |
| return 0; |
| } |
| |
| static void cpuhp_complete_idle_dead(void *arg) |
| { |
| struct cpuhp_cpu_state *st = arg; |
| |
| complete(&st->done); |
| } |
| |
| void cpuhp_report_idle_dead(void) |
| { |
| struct cpuhp_cpu_state *st = this_cpu_ptr(&cpuhp_state); |
| |
| BUG_ON(st->state != CPUHP_AP_OFFLINE); |
| rcu_report_dead(smp_processor_id()); |
| st->state = CPUHP_AP_IDLE_DEAD; |
| /* |
| * We cannot call complete after rcu_report_dead() so we delegate it |
| * to an online cpu. |
| */ |
| smp_call_function_single(cpumask_first(cpu_online_mask), |
| cpuhp_complete_idle_dead, st, 0); |
| } |
| |
| #else |
| #define notify_down_prepare NULL |
| #define takedown_cpu NULL |
| #define notify_dead NULL |
| #define notify_dying NULL |
| #endif |
| |
| #ifdef CONFIG_HOTPLUG_CPU |
| |
| /* Requires cpu_add_remove_lock to be held */ |
| static int __ref _cpu_down(unsigned int cpu, int tasks_frozen, |
| enum cpuhp_state target) |
| { |
| struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, cpu); |
| int prev_state, ret = 0; |
| bool hasdied = false; |
| |
| if (num_online_cpus() == 1) |
| return -EBUSY; |
| |
| if (!cpu_present(cpu)) |
| return -EINVAL; |
| |
| cpu_hotplug_begin(); |
| |
| cpuhp_tasks_frozen = tasks_frozen; |
| |
| prev_state = st->state; |
| st->target = target; |
| /* |
| * If the current CPU state is in the range of the AP hotplug thread, |
| * then we need to kick the thread. |
| */ |
| if (st->state > CPUHP_TEARDOWN_CPU) { |
| ret = cpuhp_kick_ap_work(cpu); |
| /* |
| * The AP side has done the error rollback already. Just |
| * return the error code.. |
| */ |
| if (ret) |
| goto out; |
| |
| /* |
| * We might have stopped still in the range of the AP hotplug |
| * thread. Nothing to do anymore. |
| */ |
| if (st->state > CPUHP_TEARDOWN_CPU) |
| goto out; |
| } |
| /* |
| * The AP brought itself down to CPUHP_TEARDOWN_CPU. So we need |
| * to do the further cleanups. |
| */ |
| ret = cpuhp_down_callbacks(cpu, st, cpuhp_bp_states, target); |
| if (ret && st->state > CPUHP_TEARDOWN_CPU && st->state < prev_state) { |
| st->target = prev_state; |
| st->rollback = true; |
| cpuhp_kick_ap_work(cpu); |
| } |
| |
| hasdied = prev_state != st->state && st->state == CPUHP_OFFLINE; |
| out: |
| cpu_hotplug_done(); |
| /* This post dead nonsense must die */ |
| if (!ret && hasdied) |
| cpu_notify_nofail(CPU_POST_DEAD, cpu); |
| return ret; |
| } |
| |
| static int do_cpu_down(unsigned int cpu, enum cpuhp_state target) |
| { |
| int err; |
| |
| cpu_maps_update_begin(); |
| |
| if (cpu_hotplug_disabled) { |
| err = -EBUSY; |
| goto out; |
| } |
| |
| err = _cpu_down(cpu, 0, target); |
| |
| out: |
| cpu_maps_update_done(); |
| return err; |
| } |
| int cpu_down(unsigned int cpu) |
| { |
| return do_cpu_down(cpu, CPUHP_OFFLINE); |
| } |
| EXPORT_SYMBOL(cpu_down); |
| #endif /*CONFIG_HOTPLUG_CPU*/ |
| |
| /** |
| * notify_cpu_starting(cpu) - call the CPU_STARTING notifiers |
| * @cpu: cpu that just started |
| * |
| * This function calls the cpu_chain notifiers with CPU_STARTING. |
| * It must be called by the arch code on the new cpu, before the new cpu |
| * enables interrupts and before the "boot" cpu returns from __cpu_up(). |
| */ |
| void notify_cpu_starting(unsigned int cpu) |
| { |
| struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, cpu); |
| enum cpuhp_state target = min((int)st->target, CPUHP_AP_ONLINE); |
| |
| while (st->state < target) { |
| struct cpuhp_step *step; |
| |
| st->state++; |
| step = cpuhp_ap_states + st->state; |
| cpuhp_invoke_callback(cpu, st->state, step->startup); |
| } |
| } |
| |
| /* |
| * Called from the idle task. We need to set active here, so we can kick off |
| * the stopper thread and unpark the smpboot threads. If the target state is |
| * beyond CPUHP_AP_ONLINE_IDLE we kick cpuhp thread and let it bring up the |
| * cpu further. |
| */ |
| void cpuhp_online_idle(enum cpuhp_state state) |
| { |
| struct cpuhp_cpu_state *st = this_cpu_ptr(&cpuhp_state); |
| unsigned int cpu = smp_processor_id(); |
| |
| /* Happens for the boot cpu */ |
| if (state != CPUHP_AP_ONLINE_IDLE) |
| return; |
| |
| st->state = CPUHP_AP_ONLINE_IDLE; |
| |
| /* Unpark the stopper thread and the hotplug thread of this cpu */ |
| stop_machine_unpark(cpu); |
| kthread_unpark(st->thread); |
| |
| /* Should we go further up ? */ |
| if (st->target > CPUHP_AP_ONLINE_IDLE) |
| __cpuhp_kick_ap_work(st); |
| else |
| complete(&st->done); |
| } |
| |
| /* Requires cpu_add_remove_lock to be held */ |
| static int _cpu_up(unsigned int cpu, int tasks_frozen, enum cpuhp_state target) |
| { |
| struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, cpu); |
| struct task_struct *idle; |
| int ret = 0; |
| |
| cpu_hotplug_begin(); |
| |
| if (!cpu_present(cpu)) { |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| /* |
| * The caller of do_cpu_up might have raced with another |
| * caller. Ignore it for now. |
| */ |
| if (st->state >= target) |
| goto out; |
| |
| if (st->state == CPUHP_OFFLINE) { |
| /* Let it fail before we try to bring the cpu up */ |
| idle = idle_thread_get(cpu); |
| if (IS_ERR(idle)) { |
| ret = PTR_ERR(idle); |
| goto out; |
| } |
| } |
| |
| cpuhp_tasks_frozen = tasks_frozen; |
| |
| st->target = target; |
| /* |
| * If the current CPU state is in the range of the AP hotplug thread, |
| * then we need to kick the thread once more. |
| */ |
| if (st->state > CPUHP_BRINGUP_CPU) { |
| ret = cpuhp_kick_ap_work(cpu); |
| /* |
| * The AP side has done the error rollback already. Just |
| * return the error code.. |
| */ |
| if (ret) |
| goto out; |
| } |
| |
| /* |
| * Try to reach the target state. We max out on the BP at |
| * CPUHP_BRINGUP_CPU. After that the AP hotplug thread is |
| * responsible for bringing it up to the target state. |
| */ |
| target = min((int)target, CPUHP_BRINGUP_CPU); |
| ret = cpuhp_up_callbacks(cpu, st, cpuhp_bp_states, target); |
| out: |
| cpu_hotplug_done(); |
| return ret; |
| } |
| |
| static int do_cpu_up(unsigned int cpu, enum cpuhp_state target) |
| { |
| int err = 0; |
| |
| if (!cpu_possible(cpu)) { |
| pr_err("can't online cpu %d because it is not configured as may-hotadd at boot time\n", |
| cpu); |
| #if defined(CONFIG_IA64) |
| pr_err("please check additional_cpus= boot parameter\n"); |
| #endif |
| return -EINVAL; |
| } |
| |
| err = try_online_node(cpu_to_node(cpu)); |
| if (err) |
| return err; |
| |
| cpu_maps_update_begin(); |
| |
| if (cpu_hotplug_disabled) { |
| err = -EBUSY; |
| goto out; |
| } |
| |
| err = _cpu_up(cpu, 0, target); |
| out: |
| cpu_maps_update_done(); |
| return err; |
| } |
| |
| int cpu_up(unsigned int cpu) |
| { |
| return do_cpu_up(cpu, CPUHP_ONLINE); |
| } |
| EXPORT_SYMBOL_GPL(cpu_up); |
| |
| #ifdef CONFIG_PM_SLEEP_SMP |
| static cpumask_var_t frozen_cpus; |
| |
| int disable_nonboot_cpus(void) |
| { |
| int cpu, first_cpu, error = 0; |
| |
| cpu_maps_update_begin(); |
| first_cpu = cpumask_first(cpu_online_mask); |
| /* |
| * We take down all of the non-boot CPUs in one shot to avoid races |
| * with the userspace trying to use the CPU hotplug at the same time |
| */ |
| cpumask_clear(frozen_cpus); |
| |
| pr_info("Disabling non-boot CPUs ...\n"); |
| for_each_online_cpu(cpu) { |
| if (cpu == first_cpu) |
| continue; |
| trace_suspend_resume(TPS("CPU_OFF"), cpu, true); |
| error = _cpu_down(cpu, 1, CPUHP_OFFLINE); |
| trace_suspend_resume(TPS("CPU_OFF"), cpu, false); |
| if (!error) |
| cpumask_set_cpu(cpu, frozen_cpus); |
| else { |
| pr_err("Error taking CPU%d down: %d\n", cpu, error); |
| break; |
| } |
| } |
| |
| if (!error) |
| BUG_ON(num_online_cpus() > 1); |
| else |
| pr_err("Non-boot CPUs are not disabled\n"); |
| |
| /* |
| * Make sure the CPUs won't be enabled by someone else. We need to do |
| * this even in case of failure as all disable_nonboot_cpus() users are |
| * supposed to do enable_nonboot_cpus() on the failure path. |
| */ |
| cpu_hotplug_disabled++; |
| |
| cpu_maps_update_done(); |
| return error; |
| } |
| |
| void __weak arch_enable_nonboot_cpus_begin(void) |
| { |
| } |
| |
| void __weak arch_enable_nonboot_cpus_end(void) |
| { |
| } |
| |
| void enable_nonboot_cpus(void) |
| { |
| int cpu, error; |
| |
| /* Allow everyone to use the CPU hotplug again */ |
| cpu_maps_update_begin(); |
| WARN_ON(--cpu_hotplug_disabled < 0); |
| if (cpumask_empty(frozen_cpus)) |
| goto out; |
| |
| pr_info("Enabling non-boot CPUs ...\n"); |
| |
| arch_enable_nonboot_cpus_begin(); |
| |
| for_each_cpu(cpu, frozen_cpus) { |
| trace_suspend_resume(TPS("CPU_ON"), cpu, true); |
| error = _cpu_up(cpu, 1, CPUHP_ONLINE); |
| trace_suspend_resume(TPS("CPU_ON"), cpu, false); |
| if (!error) { |
| pr_info("CPU%d is up\n", cpu); |
| continue; |
| } |
| pr_warn("Error taking CPU%d up: %d\n", cpu, error); |
| } |
| |
| arch_enable_nonboot_cpus_end(); |
| |
| cpumask_clear(frozen_cpus); |
| out: |
| cpu_maps_update_done(); |
| } |
| |
| static int __init alloc_frozen_cpus(void) |
| { |
| if (!alloc_cpumask_var(&frozen_cpus, GFP_KERNEL|__GFP_ZERO)) |
| return -ENOMEM; |
| return 0; |
| } |
| core_initcall(alloc_frozen_cpus); |
| |
| /* |
| * When callbacks for CPU hotplug notifications are being executed, we must |
| * ensure that the state of the system with respect to the tasks being frozen |
| * or not, as reported by the notification, remains unchanged *throughout the |
| * duration* of the execution of the callbacks. |
| * Hence we need to prevent the freezer from racing with regular CPU hotplug. |
| * |
| * This synchronization is implemented by mutually excluding regular CPU |
| * hotplug and Suspend/Hibernate call paths by hooking onto the Suspend/ |
| * Hibernate notifications. |
| */ |
| static int |
| cpu_hotplug_pm_callback(struct notifier_block *nb, |
| unsigned long action, void *ptr) |
| { |
| switch (action) { |
| |
| case PM_SUSPEND_PREPARE: |
| case PM_HIBERNATION_PREPARE: |
| cpu_hotplug_disable(); |
| break; |
| |
| case PM_POST_SUSPEND: |
| case PM_POST_HIBERNATION: |
| cpu_hotplug_enable(); |
| break; |
| |
| default: |
| return NOTIFY_DONE; |
| } |
| |
| return NOTIFY_OK; |
| } |
| |
| |
| static int __init cpu_hotplug_pm_sync_init(void) |
| { |
| /* |
| * cpu_hotplug_pm_callback has higher priority than x86 |
| * bsp_pm_callback which depends on cpu_hotplug_pm_callback |
| * to disable cpu hotplug to avoid cpu hotplug race. |
| */ |
| pm_notifier(cpu_hotplug_pm_callback, 0); |
| return 0; |
| } |
| core_initcall(cpu_hotplug_pm_sync_init); |
| |
| #endif /* CONFIG_PM_SLEEP_SMP */ |
| |
| #endif /* CONFIG_SMP */ |
| |
| /* Boot processor state steps */ |
| static struct cpuhp_step cpuhp_bp_states[] = { |
| [CPUHP_OFFLINE] = { |
| .name = "offline", |
| .startup = NULL, |
| .teardown = NULL, |
| }, |
| #ifdef CONFIG_SMP |
| [CPUHP_CREATE_THREADS]= { |
| .name = "threads:create", |
| .startup = smpboot_create_threads, |
| .teardown = NULL, |
| .cant_stop = true, |
| }, |
| /* |
| * Preparatory and dead notifiers. Will be replaced once the notifiers |
| * are converted to states. |
| */ |
| [CPUHP_NOTIFY_PREPARE] = { |
| .name = "notify:prepare", |
| .startup = notify_prepare, |
| .teardown = notify_dead, |
| .skip_onerr = true, |
| .cant_stop = true, |
| }, |
| /* Kicks the plugged cpu into life */ |
| [CPUHP_BRINGUP_CPU] = { |
| .name = "cpu:bringup", |
| .startup = bringup_cpu, |
| .teardown = NULL, |
| .cant_stop = true, |
| }, |
| /* |
| * Handled on controll processor until the plugged processor manages |
| * this itself. |
| */ |
| [CPUHP_TEARDOWN_CPU] = { |
| .name = "cpu:teardown", |
| .startup = NULL, |
| .teardown = takedown_cpu, |
| .cant_stop = true, |
| }, |
| #else |
| [CPUHP_BRINGUP_CPU] = { }, |
| #endif |
| }; |
| |
| /* Application processor state steps */ |
| static struct cpuhp_step cpuhp_ap_states[] = { |
| #ifdef CONFIG_SMP |
| /* Final state before CPU kills itself */ |
| [CPUHP_AP_IDLE_DEAD] = { |
| .name = "idle:dead", |
| }, |
| /* |
| * Last state before CPU enters the idle loop to die. Transient state |
| * for synchronization. |
| */ |
| [CPUHP_AP_OFFLINE] = { |
| .name = "ap:offline", |
| .cant_stop = true, |
| }, |
| /* First state is scheduler control. Interrupts are disabled */ |
| [CPUHP_AP_SCHED_STARTING] = { |
| .name = "sched:starting", |
| .startup = sched_cpu_starting, |
| .teardown = sched_cpu_dying, |
| }, |
| /* |
| * Low level startup/teardown notifiers. Run with interrupts |
| * disabled. Will be removed once the notifiers are converted to |
| * states. |
| */ |
| [CPUHP_AP_NOTIFY_STARTING] = { |
| .name = "notify:starting", |
| .startup = notify_starting, |
| .teardown = notify_dying, |
| .skip_onerr = true, |
| .cant_stop = true, |
| }, |
| /* Entry state on starting. Interrupts enabled from here on. Transient |
| * state for synchronsization */ |
| [CPUHP_AP_ONLINE] = { |
| .name = "ap:online", |
| }, |
| /* Handle smpboot threads park/unpark */ |
| [CPUHP_AP_SMPBOOT_THREADS] = { |
| .name = "smpboot:threads", |
| .startup = smpboot_unpark_threads, |
| .teardown = NULL, |
| }, |
| /* |
| * Online/down_prepare notifiers. Will be removed once the notifiers |
| * are converted to states. |
| */ |
| [CPUHP_AP_NOTIFY_ONLINE] = { |
| .name = "notify:online", |
| .startup = notify_online, |
| .teardown = notify_down_prepare, |
| .skip_onerr = true, |
| }, |
| #endif |
| /* |
| * The dynamically registered state space is here |
| */ |
| |
| #ifdef CONFIG_SMP |
| /* Last state is scheduler control setting the cpu active */ |
| [CPUHP_AP_ACTIVE] = { |
| .name = "sched:active", |
| .startup = sched_cpu_activate, |
| .teardown = sched_cpu_deactivate, |
| }, |
| #endif |
| |
| /* CPU is fully up and running. */ |
| [CPUHP_ONLINE] = { |
| .name = "online", |
| .startup = NULL, |
| .teardown = NULL, |
| }, |
| }; |
| |
| /* Sanity check for callbacks */ |
| static int cpuhp_cb_check(enum cpuhp_state state) |
| { |
| if (state <= CPUHP_OFFLINE || state >= CPUHP_ONLINE) |
| return -EINVAL; |
| return 0; |
| } |
| |
| static bool cpuhp_is_ap_state(enum cpuhp_state state) |
| { |
| /* |
| * The extra check for CPUHP_TEARDOWN_CPU is only for documentation |
| * purposes as that state is handled explicitely in cpu_down. |
| */ |
| return state > CPUHP_BRINGUP_CPU && state != CPUHP_TEARDOWN_CPU; |
| } |
| |
| static struct cpuhp_step *cpuhp_get_step(enum cpuhp_state state) |
| { |
| struct cpuhp_step *sp; |
| |
| sp = cpuhp_is_ap_state(state) ? cpuhp_ap_states : cpuhp_bp_states; |
| return sp + state; |
| } |
| |
| static void cpuhp_store_callbacks(enum cpuhp_state state, |
| const char *name, |
| int (*startup)(unsigned int cpu), |
| int (*teardown)(unsigned int cpu)) |
| { |
| /* (Un)Install the callbacks for further cpu hotplug operations */ |
| struct cpuhp_step *sp; |
| |
| mutex_lock(&cpuhp_state_mutex); |
| sp = cpuhp_get_step(state); |
| sp->startup = startup; |
| sp->teardown = teardown; |
| sp->name = name; |
| mutex_unlock(&cpuhp_state_mutex); |
| } |
| |
| static void *cpuhp_get_teardown_cb(enum cpuhp_state state) |
| { |
| return cpuhp_get_step(state)->teardown; |
| } |
| |
| /* |
| * Call the startup/teardown function for a step either on the AP or |
| * on the current CPU. |
| */ |
| static int cpuhp_issue_call(int cpu, enum cpuhp_state state, |
| int (*cb)(unsigned int), bool bringup) |
| { |
| int ret; |
| |
| if (!cb) |
| return 0; |
| /* |
| * The non AP bound callbacks can fail on bringup. On teardown |
| * e.g. module removal we crash for now. |
| */ |
| #ifdef CONFIG_SMP |
| if (cpuhp_is_ap_state(state)) |
| ret = cpuhp_invoke_ap_callback(cpu, state, cb); |
| else |
| ret = cpuhp_invoke_callback(cpu, state, cb); |
| #else |
| ret = cpuhp_invoke_callback(cpu, state, cb); |
| #endif |
| BUG_ON(ret && !bringup); |
| return ret; |
| } |
| |
| /* |
| * Called from __cpuhp_setup_state on a recoverable failure. |
| * |
| * Note: The teardown callbacks for rollback are not allowed to fail! |
| */ |
| static void cpuhp_rollback_install(int failedcpu, enum cpuhp_state state, |
| int (*teardown)(unsigned int cpu)) |
| { |
| int cpu; |
| |
| if (!teardown) |
| return; |
| |
| /* Roll back the already executed steps on the other cpus */ |
| for_each_present_cpu(cpu) { |
| struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, cpu); |
| int cpustate = st->state; |
| |
| if (cpu >= failedcpu) |
| break; |
| |
| /* Did we invoke the startup call on that cpu ? */ |
| if (cpustate >= state) |
| cpuhp_issue_call(cpu, state, teardown, false); |
| } |
| } |
| |
| /* |
| * Returns a free for dynamic slot assignment of the Online state. The states |
| * are protected by the cpuhp_slot_states mutex and an empty slot is identified |
| * by having no name assigned. |
| */ |
| static int cpuhp_reserve_state(enum cpuhp_state state) |
| { |
| enum cpuhp_state i; |
| |
| mutex_lock(&cpuhp_state_mutex); |
| for (i = CPUHP_AP_ONLINE_DYN; i <= CPUHP_AP_ONLINE_DYN_END; i++) { |
| if (cpuhp_ap_states[i].name) |
| continue; |
| |
| cpuhp_ap_states[i].name = "Reserved"; |
| mutex_unlock(&cpuhp_state_mutex); |
| return i; |
| } |
| mutex_unlock(&cpuhp_state_mutex); |
| WARN(1, "No more dynamic states available for CPU hotplug\n"); |
| return -ENOSPC; |
| } |
| |
| /** |
| * __cpuhp_setup_state - Setup the callbacks for an hotplug machine state |
| * @state: The state to setup |
| * @invoke: If true, the startup function is invoked for cpus where |
| * cpu state >= @state |
| * @startup: startup callback function |
| * @teardown: teardown callback function |
| * |
| * Returns 0 if successful, otherwise a proper error code |
| */ |
| int __cpuhp_setup_state(enum cpuhp_state state, |
| const char *name, bool invoke, |
| int (*startup)(unsigned int cpu), |
| int (*teardown)(unsigned int cpu)) |
| { |
| int cpu, ret = 0; |
| int dyn_state = 0; |
| |
| if (cpuhp_cb_check(state) || !name) |
| return -EINVAL; |
| |
| get_online_cpus(); |
| |
| /* currently assignments for the ONLINE state are possible */ |
| if (state == CPUHP_AP_ONLINE_DYN) { |
| dyn_state = 1; |
| ret = cpuhp_reserve_state(state); |
| if (ret < 0) |
| goto out; |
| state = ret; |
| } |
| |
| cpuhp_store_callbacks(state, name, startup, teardown); |
| |
| if (!invoke || !startup) |
| goto out; |
| |
| /* |
| * Try to call the startup callback for each present cpu |
| * depending on the hotplug state of the cpu. |
| */ |
| for_each_present_cpu(cpu) { |
| struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, cpu); |
| int cpustate = st->state; |
| |
| if (cpustate < state) |
| continue; |
| |
| ret = cpuhp_issue_call(cpu, state, startup, true); |
| if (ret) { |
| cpuhp_rollback_install(cpu, state, teardown); |
| cpuhp_store_callbacks(state, NULL, NULL, NULL); |
| goto out; |
| } |
| } |
| out: |
| put_online_cpus(); |
| if (!ret && dyn_state) |
| return state; |
| return ret; |
| } |
| EXPORT_SYMBOL(__cpuhp_setup_state); |
| |
| /** |
| * __cpuhp_remove_state - Remove the callbacks for an hotplug machine state |
| * @state: The state to remove |
| * @invoke: If true, the teardown function is invoked for cpus where |
| * cpu state >= @state |
| * |
| * The teardown callback is currently not allowed to fail. Think |
| * about module removal! |
| */ |
| void __cpuhp_remove_state(enum cpuhp_state state, bool invoke) |
| { |
| int (*teardown)(unsigned int cpu) = cpuhp_get_teardown_cb(state); |
| int cpu; |
| |
| BUG_ON(cpuhp_cb_check(state)); |
| |
| get_online_cpus(); |
| |
| if (!invoke || !teardown) |
| goto remove; |
| |
| /* |
| * Call the teardown callback for each present cpu depending |
| * on the hotplug state of the cpu. This function is not |
| * allowed to fail currently! |
| */ |
| for_each_present_cpu(cpu) { |
| struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, cpu); |
| int cpustate = st->state; |
| |
| if (cpustate >= state) |
| cpuhp_issue_call(cpu, state, teardown, false); |
| } |
| remove: |
| cpuhp_store_callbacks(state, NULL, NULL, NULL); |
| put_online_cpus(); |
| } |
| EXPORT_SYMBOL(__cpuhp_remove_state); |
| |
| #if defined(CONFIG_SYSFS) && defined(CONFIG_HOTPLUG_CPU) |
| static ssize_t show_cpuhp_state(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, dev->id); |
| |
| return sprintf(buf, "%d\n", st->state); |
| } |
| static DEVICE_ATTR(state, 0444, show_cpuhp_state, NULL); |
| |
| static ssize_t write_cpuhp_target(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, dev->id); |
| struct cpuhp_step *sp; |
| int target, ret; |
| |
| ret = kstrtoint(buf, 10, &target); |
| if (ret) |
| return ret; |
| |
| #ifdef CONFIG_CPU_HOTPLUG_STATE_CONTROL |
| if (target < CPUHP_OFFLINE || target > CPUHP_ONLINE) |
| return -EINVAL; |
| #else |
| if (target != CPUHP_OFFLINE && target != CPUHP_ONLINE) |
| return -EINVAL; |
| #endif |
| |
| ret = lock_device_hotplug_sysfs(); |
| if (ret) |
| return ret; |
| |
| mutex_lock(&cpuhp_state_mutex); |
| sp = cpuhp_get_step(target); |
| ret = !sp->name || sp->cant_stop ? -EINVAL : 0; |
| mutex_unlock(&cpuhp_state_mutex); |
| if (ret) |
| return ret; |
| |
| if (st->state < target) |
| ret = do_cpu_up(dev->id, target); |
| else |
| ret = do_cpu_down(dev->id, target); |
| |
| unlock_device_hotplug(); |
| return ret ? ret : count; |
| } |
| |
| static ssize_t show_cpuhp_target(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, dev->id); |
| |
| return sprintf(buf, "%d\n", st->target); |
| } |
| static DEVICE_ATTR(target, 0644, show_cpuhp_target, write_cpuhp_target); |
| |
| static struct attribute *cpuhp_cpu_attrs[] = { |
| &dev_attr_state.attr, |
| &dev_attr_target.attr, |
| NULL |
| }; |
| |
| static struct attribute_group cpuhp_cpu_attr_group = { |
| .attrs = cpuhp_cpu_attrs, |
| .name = "hotplug", |
| NULL |
| }; |
| |
| static ssize_t show_cpuhp_states(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| ssize_t cur, res = 0; |
| int i; |
| |
| mutex_lock(&cpuhp_state_mutex); |
| for (i = CPUHP_OFFLINE; i <= CPUHP_ONLINE; i++) { |
| struct cpuhp_step *sp = cpuhp_get_step(i); |
| |
| if (sp->name) { |
| cur = sprintf(buf, "%3d: %s\n", i, sp->name); |
| buf += cur; |
| res += cur; |
| } |
| } |
| mutex_unlock(&cpuhp_state_mutex); |
| return res; |
| } |
| static DEVICE_ATTR(states, 0444, show_cpuhp_states, NULL); |
| |
| static struct attribute *cpuhp_cpu_root_attrs[] = { |
| &dev_attr_states.attr, |
| NULL |
| }; |
| |
| static struct attribute_group cpuhp_cpu_root_attr_group = { |
| .attrs = cpuhp_cpu_root_attrs, |
| .name = "hotplug", |
| NULL |
| }; |
| |
| static int __init cpuhp_sysfs_init(void) |
| { |
| int cpu, ret; |
| |
| ret = sysfs_create_group(&cpu_subsys.dev_root->kobj, |
| &cpuhp_cpu_root_attr_group); |
| if (ret) |
| return ret; |
| |
| for_each_possible_cpu(cpu) { |
| struct device *dev = get_cpu_device(cpu); |
| |
| if (!dev) |
| continue; |
| ret = sysfs_create_group(&dev->kobj, &cpuhp_cpu_attr_group); |
| if (ret) |
| return ret; |
| } |
| return 0; |
| } |
| device_initcall(cpuhp_sysfs_init); |
| #endif |
| |
| /* |
| * cpu_bit_bitmap[] is a special, "compressed" data structure that |
| * represents all NR_CPUS bits binary values of 1<<nr. |
| * |
| * It is used by cpumask_of() to get a constant address to a CPU |
| * mask value that has a single bit set only. |
| */ |
| |
| /* cpu_bit_bitmap[0] is empty - so we can back into it */ |
| #define MASK_DECLARE_1(x) [x+1][0] = (1UL << (x)) |
| #define MASK_DECLARE_2(x) MASK_DECLARE_1(x), MASK_DECLARE_1(x+1) |
| #define MASK_DECLARE_4(x) MASK_DECLARE_2(x), MASK_DECLARE_2(x+2) |
| #define MASK_DECLARE_8(x) MASK_DECLARE_4(x), MASK_DECLARE_4(x+4) |
| |
| const unsigned long cpu_bit_bitmap[BITS_PER_LONG+1][BITS_TO_LONGS(NR_CPUS)] = { |
| |
| MASK_DECLARE_8(0), MASK_DECLARE_8(8), |
| MASK_DECLARE_8(16), MASK_DECLARE_8(24), |
| #if BITS_PER_LONG > 32 |
| MASK_DECLARE_8(32), MASK_DECLARE_8(40), |
| MASK_DECLARE_8(48), MASK_DECLARE_8(56), |
| #endif |
| }; |
| EXPORT_SYMBOL_GPL(cpu_bit_bitmap); |
| |
| const DECLARE_BITMAP(cpu_all_bits, NR_CPUS) = CPU_BITS_ALL; |
| EXPORT_SYMBOL(cpu_all_bits); |
| |
| #ifdef CONFIG_INIT_ALL_POSSIBLE |
| struct cpumask __cpu_possible_mask __read_mostly |
| = {CPU_BITS_ALL}; |
| #else |
| struct cpumask __cpu_possible_mask __read_mostly; |
| #endif |
| EXPORT_SYMBOL(__cpu_possible_mask); |
| |
| struct cpumask __cpu_online_mask __read_mostly; |
| EXPORT_SYMBOL(__cpu_online_mask); |
| |
| struct cpumask __cpu_present_mask __read_mostly; |
| EXPORT_SYMBOL(__cpu_present_mask); |
| |
| struct cpumask __cpu_active_mask __read_mostly; |
| EXPORT_SYMBOL(__cpu_active_mask); |
| |
| void init_cpu_present(const struct cpumask *src) |
| { |
| cpumask_copy(&__cpu_present_mask, src); |
| } |
| |
| void init_cpu_possible(const struct cpumask *src) |
| { |
| cpumask_copy(&__cpu_possible_mask, src); |
| } |
| |
| void init_cpu_online(const struct cpumask *src) |
| { |
| cpumask_copy(&__cpu_online_mask, src); |
| } |
| |
| /* |
| * Activate the first processor. |
| */ |
| void __init boot_cpu_init(void) |
| { |
| int cpu = smp_processor_id(); |
| |
| /* Mark the boot cpu "present", "online" etc for SMP and UP case */ |
| set_cpu_online(cpu, true); |
| set_cpu_active(cpu, true); |
| set_cpu_present(cpu, true); |
| set_cpu_possible(cpu, true); |
| } |
| |
| /* |
| * Must be called _AFTER_ setting up the per_cpu areas |
| */ |
| void __init boot_cpu_state_init(void) |
| { |
| per_cpu_ptr(&cpuhp_state, smp_processor_id())->state = CPUHP_ONLINE; |
| } |