Merge tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mturquette/linux
Pull clock subsystem fixes from Mike Turquette:
"A mix of small fixes affecting mostly ARM platforms as well as a
discrete clock expander chip. Most fixes are corrections to lousy
clock data of one form or another."
* tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mturquette/linux:
clk: mxs: Include clk mxs header file
clk: vt8500: Fix unbalanced spinlock in vt8500_dclk_set_rate()
clk: si5351: Set initial clkout rate when defined in platform data.
clk: si5351: Fix clkout rate computation.
clk: samsung: Add CLK_IGNORE_UNUSED flag for the sysreg clocks
clk: ux500: clk-sysctrl: handle clocks with no parents
clk: ux500: Provide device enumeration number suffix for SMSC911x
diff --git a/drivers/clk/clk-si5351.c b/drivers/clk/clk-si5351.c
index 8927284..24f5536 100644
--- a/drivers/clk/clk-si5351.c
+++ b/drivers/clk/clk-si5351.c
@@ -932,7 +932,7 @@
unsigned char reg;
unsigned char rdiv;
- if (hwdata->num > 5)
+ if (hwdata->num <= 5)
reg = si5351_msynth_params_address(hwdata->num) + 2;
else
reg = SI5351_CLK6_7_OUTPUT_DIVIDER;
@@ -1477,6 +1477,16 @@
return -EINVAL;
}
drvdata->onecell.clks[n] = clk;
+
+ /* set initial clkout rate */
+ if (pdata->clkout[n].rate != 0) {
+ int ret;
+ ret = clk_set_rate(clk, pdata->clkout[n].rate);
+ if (ret != 0) {
+ dev_err(&client->dev, "Cannot set rate : %d\n",
+ ret);
+ }
+ }
}
ret = of_clk_add_provider(client->dev.of_node, of_clk_src_onecell_get,
diff --git a/drivers/clk/clk-vt8500.c b/drivers/clk/clk-vt8500.c
index debf688..553ac35 100644
--- a/drivers/clk/clk-vt8500.c
+++ b/drivers/clk/clk-vt8500.c
@@ -183,7 +183,7 @@
writel(divisor, cdev->div_reg);
vt8500_pmc_wait_busy();
- spin_lock_irqsave(cdev->lock, flags);
+ spin_unlock_irqrestore(cdev->lock, flags);
return 0;
}
diff --git a/drivers/clk/mxs/clk-imx28.c b/drivers/clk/mxs/clk-imx28.c
index d0e5eed..4faf0af 100644
--- a/drivers/clk/mxs/clk-imx28.c
+++ b/drivers/clk/mxs/clk-imx28.c
@@ -10,6 +10,7 @@
*/
#include <linux/clk.h>
+#include <linux/clk/mxs.h>
#include <linux/clkdev.h>
#include <linux/err.h>
#include <linux/init.h>
diff --git a/drivers/clk/samsung/clk-exynos4.c b/drivers/clk/samsung/clk-exynos4.c
index d0940e6..3c1f888 100644
--- a/drivers/clk/samsung/clk-exynos4.c
+++ b/drivers/clk/samsung/clk-exynos4.c
@@ -791,7 +791,8 @@
GATE(smmu_pcie, "smmu_pcie", "aclk133", GATE_IP_FSYS, 18, 0, 0),
GATE(modemif, "modemif", "aclk100", GATE_IP_PERIL, 28, 0, 0),
GATE(chipid, "chipid", "aclk100", E4210_GATE_IP_PERIR, 0, 0, 0),
- GATE(sysreg, "sysreg", "aclk100", E4210_GATE_IP_PERIR, 0, 0, 0),
+ GATE(sysreg, "sysreg", "aclk100", E4210_GATE_IP_PERIR, 0,
+ CLK_IGNORE_UNUSED, 0),
GATE(hdmi_cec, "hdmi_cec", "aclk100", E4210_GATE_IP_PERIR, 11, 0, 0),
GATE(smmu_rotator, "smmu_rotator", "aclk200",
E4210_GATE_IP_IMAGE, 4, 0, 0),
@@ -819,7 +820,8 @@
GATE(smmu_mdma, "smmu_mdma", "aclk200", E4X12_GATE_IP_IMAGE, 5, 0, 0),
GATE(mipi_hsi, "mipi_hsi", "aclk133", GATE_IP_FSYS, 10, 0, 0),
GATE(chipid, "chipid", "aclk100", E4X12_GATE_IP_PERIR, 0, 0, 0),
- GATE(sysreg, "sysreg", "aclk100", E4X12_GATE_IP_PERIR, 1, 0, 0),
+ GATE(sysreg, "sysreg", "aclk100", E4X12_GATE_IP_PERIR, 1,
+ CLK_IGNORE_UNUSED, 0),
GATE(hdmi_cec, "hdmi_cec", "aclk100", E4X12_GATE_IP_PERIR, 11, 0, 0),
GATE(sclk_mdnie0, "sclk_mdnie0", "div_mdnie0",
SRC_MASK_LCD0, 4, CLK_SET_RATE_PARENT, 0),
diff --git a/drivers/clk/ux500/clk-sysctrl.c b/drivers/clk/ux500/clk-sysctrl.c
index bc7e9bd..e364c9d 100644
--- a/drivers/clk/ux500/clk-sysctrl.c
+++ b/drivers/clk/ux500/clk-sysctrl.c
@@ -145,7 +145,13 @@
return ERR_PTR(-ENOMEM);
}
- for (i = 0; i < num_parents; i++) {
+ /* set main clock registers */
+ clk->reg_sel[0] = reg_sel[0];
+ clk->reg_bits[0] = reg_bits[0];
+ clk->reg_mask[0] = reg_mask[0];
+
+ /* handle clocks with more than one parent */
+ for (i = 1; i < num_parents; i++) {
clk->reg_sel[i] = reg_sel[i];
clk->reg_bits[i] = reg_bits[i];
clk->reg_mask[i] = reg_mask[i];
diff --git a/drivers/clk/ux500/u8500_clk.c b/drivers/clk/ux500/u8500_clk.c
index 0b4f35a..80069c3 100644
--- a/drivers/clk/ux500/u8500_clk.c
+++ b/drivers/clk/ux500/u8500_clk.c
@@ -325,7 +325,7 @@
clk = clk_reg_prcc_pclk("p3_pclk0", "per3clk", clkrst3_base,
BIT(0), 0);
clk_register_clkdev(clk, "fsmc", NULL);
- clk_register_clkdev(clk, NULL, "smsc911x");
+ clk_register_clkdev(clk, NULL, "smsc911x.0");
clk = clk_reg_prcc_pclk("p3_pclk1", "per3clk", clkrst3_base,
BIT(1), 0);