brcmfmac: update escan for multiple bss and simplify.
Add support for scanning on non primary netdev (p2p) and
simplify the p2p scanning preparation.
Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c
index fff5722..aef0287 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c
@@ -91,11 +91,6 @@
};
};
-static struct brcmf_cfg80211_vif *p2p_discover_vif(struct brcmf_p2p_info *p2p)
-{
- return p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif;
-}
-
/**
* brcmf_p2p_set_firmware() - prepare firmware for peer-to-peer operation.
*
@@ -195,34 +190,6 @@
}
/**
- * brcmf_p2p_discover_disable_search() - reset discover state.
- *
- * @p2p: P2P specific data.
- *
- * Reset the discover state to @WL_P2P_DISC_ST_SCAN. Returns 0 on success.
- */
-static s32 brcmf_p2p_discover_disable_search(struct brcmf_p2p_info *p2p)
-{
- struct brcmf_cfg80211_vif *vif = p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif;
- struct brcmf_p2p_disc_st_le discovery_mode;
- int ret;
-
- /*
- * vif presence indicates discovery is initialized.
- */
- if (!vif)
- return -ENODEV;
-
- ret = brcmf_fil_bsscfg_data_get(vif->ifp, "p2p_state",
- &discovery_mode,
- sizeof(discovery_mode));
- if (!ret && discovery_mode.state != WL_P2P_DISC_ST_SCAN)
- ret = brcmf_p2p_set_discover_state(vif->ifp,
- WL_P2P_DISC_ST_SCAN, 0, 0);
- return ret;
-}
-
-/**
* brcmf_p2p_init_discovery() - enable discovery in the firmware.
*
* @p2p: P2P specific data.
@@ -376,32 +343,6 @@
}
/**
- * brcmf_p2p_configure_probereq() - Configure probe request data.
- *
- * @p2p: P2P specific data.
- * @ie: buffer containing information elements.
- * @ie_len: length of @ie buffer.
- *
- */
-static int brcmf_p2p_configure_probereq(struct brcmf_p2p_info *p2p,
- const u8 *ie, u32 ie_len)
-{
- struct brcmf_cfg80211_vif *vif;
- s32 err = 0;
-
- brcmf_dbg(TRACE, "enter\n");
- vif = p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif;
-
- err = brcmf_vif_set_mgmt_ie(vif, BRCMF_VNDR_IE_PRBREQ_FLAG,
- ie, ie_len);
-
- if (err < 0)
- brcmf_err("set probreq ie occurs error %d\n", err);
-
- return err;
-}
-
-/*
* brcmf_p2p_escan() - initiate a P2P scan.
*
* @p2p: P2P specific data.
@@ -621,12 +562,14 @@
*
* @wiphy: wiphy device.
* @request: scan request from cfg80211.
+ * @vif: vif on which scan request is to be executed.
*
* Prepare the scan appropriately for type of scan requested. Overrides the
* escan .run() callback for peer-to-peer scanning.
*/
int brcmf_p2p_scan_prep(struct wiphy *wiphy,
- struct cfg80211_scan_request *request)
+ struct cfg80211_scan_request *request,
+ struct brcmf_cfg80211_vif *vif)
{
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
struct brcmf_p2p_info *p2p = &cfg->p2p;
@@ -644,31 +587,16 @@
brcmf_dbg(INFO, "P2P: GO_NEG_PHASE status cleared\n");
err = brcmf_p2p_enable_discovery(p2p);
- if (err == 0)
- err = brcmf_p2p_configure_probereq(p2p, request->ie,
- request->ie_len);
+ if (err)
+ return err;
- /*
- * override .run_escan() callback.
- */
+ vif = p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif;
+
+ /* override .run_escan() callback. */
cfg->escan_info.run = brcmf_p2p_run_escan;
- } else {
- /*
- * legacy scan trigger
- * So, we have to disable p2p discovery if p2p discovery is on
- */
- (void)brcmf_p2p_discover_disable_search(p2p);
-
- /*
- * clear p2p vendor ies for probe request set by
- * previous p2p related scan(s).
- */
- if (p2p_discover_vif(p2p))
- err = brcmf_vif_set_mgmt_ie(p2p_discover_vif(p2p),
- BRCMF_VNDR_IE_PRBREQ_FLAG,
- request->ie,
- request->ie_len);
}
+ err = brcmf_vif_set_mgmt_ie(vif, BRCMF_VNDR_IE_PRBREQ_FLAG,
+ request->ie, request->ie_len);
return err;
}
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/p2p.h b/drivers/net/wireless/brcm80211/brcmfmac/p2p.h
index df93272..1f97afd 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.h
+++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.h
@@ -111,7 +111,8 @@
int brcmf_p2p_start_device(struct wiphy *wiphy, struct wireless_dev *wdev);
void brcmf_p2p_stop_device(struct wiphy *wiphy, struct wireless_dev *wdev);
int brcmf_p2p_scan_prep(struct wiphy *wiphy,
- struct cfg80211_scan_request *request);
+ struct cfg80211_scan_request *request,
+ struct brcmf_cfg80211_vif *vif);
int brcmf_p2p_remain_on_channel(struct wiphy *wiphy, struct wireless_dev *wdev,
struct ieee80211_channel *channel,
unsigned int duration, u64 *cookie);
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
index d792c3b..c57c1db 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
@@ -805,6 +805,12 @@
return -EAGAIN;
}
+ /* If scan req comes for p2p0, send it over primary I/F */
+ if (ifp->vif == cfg->p2p.bss_idx[P2PAPI_BSSCFG_DEVICE].vif) {
+ ifp = cfg->p2p.bss_idx[P2PAPI_BSSCFG_PRIMARY].vif->ifp;
+ ndev = ifp->ndev;
+ }
+
/* Arm scan timeout timer */
mod_timer(&cfg->escan_timeout, jiffies +
WL_ESCAN_TIMER_INTERVAL_MS * HZ / 1000);
@@ -824,7 +830,7 @@
set_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status);
if (escan_req) {
cfg->escan_info.run = brcmf_run_escan;
- err = brcmf_p2p_scan_prep(wiphy, request);
+ err = brcmf_p2p_scan_prep(wiphy, request, ifp->vif);
if (err)
goto scan_out;