mtd: fix hang-up in cfi erase and read contention
cfi erase command hangs up when erase and read contention occurs.
If read runs at the same address as erase operation, read issues
Erase-Suspend via get_chip() and the erase goes into sleep in wait queue.
But in this case, read operation exits by time-out without waking it up.
I think the other variants (0001, 0020 and lpddr) have the same problem too.
Tested and verified the patch only on CFI-0002 flash, though.
Signed-off-by: Tadashi Abe <tabe@mvista.com>
Acked-by: Joakim Tjernlund <joakim.tjernlund@transmode.se>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c
index 09cb7c8..121be02 100644
--- a/drivers/mtd/chips/cfi_cmdset_0001.c
+++ b/drivers/mtd/chips/cfi_cmdset_0001.c
@@ -812,12 +812,9 @@
break;
if (time_after(jiffies, timeo)) {
- /* Urgh. Resume and pretend we weren't here. */
- map_write(map, CMD(0xd0), adr);
- /* Make sure we're in 'read status' mode if it had finished */
- map_write(map, CMD(0x70), adr);
- chip->state = FL_ERASING;
- chip->oldstate = FL_READY;
+ /* Urgh. Resume and pretend we weren't here.
+ * Make sure we're in 'read status' mode if it had finished */
+ put_chip(map, chip, adr);
printk(KERN_ERR "%s: Chip not ready after erase "
"suspended: status = 0x%lx\n", map->name, status.x[0]);
return -EIO;