staging: line6: sync with upstream
Big upstream sync.
Signed-off-by: Markus Grabner <grabner@icg.tugraz.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/drivers/staging/line6/pod.c b/drivers/staging/line6/pod.c
index 28f5146..3aa6f6c 100644
--- a/drivers/staging/line6/pod.c
+++ b/drivers/staging/line6/pod.c
@@ -1,7 +1,7 @@
/*
- * Line6 Linux USB driver - 0.8.0
+ * Line6 Linux USB driver - 0.9.0
*
- * Copyright (C) 2004-2009 Markus Grabner (grabner@icg.tugraz.at)
+ * Copyright (C) 2004-2010 Markus Grabner (grabner@icg.tugraz.at)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
@@ -9,13 +9,14 @@
*
*/
-#include "driver.h"
-
#include <linux/slab.h>
+#include <linux/wait.h>
+#include <sound/control.h>
#include "audio.h"
#include "capture.h"
#include "control.h"
+#include "driver.h"
#include "playback.h"
#include "pod.h"
@@ -45,7 +46,7 @@
POD_tuner_freq = 0x15,
POD_tuner_note = 0x16,
POD_tuner_pitch = 0x17,
- POD_system_invalid = 0x7fff
+ POD_system_invalid = 0x10000
};
enum {
@@ -69,13 +70,16 @@
};
static struct line6_pcm_properties pod_pcm_properties = {
- .snd_line6_playback_hw = {
+ .snd_line6_playback_hw = {
.info = (SNDRV_PCM_INFO_MMAP |
- SNDRV_PCM_INFO_INTERLEAVED |
- SNDRV_PCM_INFO_BLOCK_TRANSFER |
- SNDRV_PCM_INFO_MMAP_VALID |
- SNDRV_PCM_INFO_PAUSE |
- SNDRV_PCM_INFO_SYNC_START),
+ SNDRV_PCM_INFO_INTERLEAVED |
+ SNDRV_PCM_INFO_BLOCK_TRANSFER |
+ SNDRV_PCM_INFO_MMAP_VALID |
+ SNDRV_PCM_INFO_PAUSE |
+#ifdef CONFIG_PM
+ SNDRV_PCM_INFO_RESUME |
+#endif
+ SNDRV_PCM_INFO_SYNC_START),
.formats = SNDRV_PCM_FMTBIT_S24_3LE,
.rates = SNDRV_PCM_RATE_KNOT,
.rate_min = 39062,
@@ -83,17 +87,20 @@
.channels_min = 2,
.channels_max = 2,
.buffer_bytes_max = 60000,
- .period_bytes_min = LINE6_ISO_PACKET_SIZE_MAX * POD_BYTES_PER_FRAME, /* at least one URB must fit into one period */
+ .period_bytes_min = 64,
.period_bytes_max = 8192,
.periods_min = 1,
.periods_max = 1024
},
- .snd_line6_capture_hw = {
+ .snd_line6_capture_hw = {
.info = (SNDRV_PCM_INFO_MMAP |
- SNDRV_PCM_INFO_INTERLEAVED |
- SNDRV_PCM_INFO_BLOCK_TRANSFER |
- SNDRV_PCM_INFO_MMAP_VALID |
- SNDRV_PCM_INFO_SYNC_START),
+ SNDRV_PCM_INFO_INTERLEAVED |
+ SNDRV_PCM_INFO_BLOCK_TRANSFER |
+ SNDRV_PCM_INFO_MMAP_VALID |
+#ifdef CONFIG_PM
+ SNDRV_PCM_INFO_RESUME |
+#endif
+ SNDRV_PCM_INFO_SYNC_START),
.formats = SNDRV_PCM_FMTBIT_S24_3LE,
.rates = SNDRV_PCM_RATE_KNOT,
.rate_min = 39062,
@@ -101,7 +108,7 @@
.channels_min = 2,
.channels_max = 2,
.buffer_bytes_max = 60000,
- .period_bytes_min = LINE6_ISO_PACKET_SIZE_MAX * POD_BYTES_PER_FRAME, /* at least one URB must fit into one period */
+ .period_bytes_min = 64,
.period_bytes_max = 8192,
.periods_min = 1,
.periods_max = 1024
@@ -113,9 +120,19 @@
.bytes_per_frame = POD_BYTES_PER_FRAME
};
-static const char pod_request_version[] = { 0xf0, 0x7e, 0x7f, 0x06, 0x01, 0xf7 };
-static const char pod_request_channel[] = { 0xf0, 0x00, 0x01, 0x0c, 0x03, 0x75, 0xf7 };
-static const char pod_version_header[] = { 0xf2, 0x7e, 0x7f, 0x06, 0x02 };
+static const char pod_request_channel[] = {
+ 0xf0, 0x00, 0x01, 0x0c, 0x03, 0x75, 0xf7
+};
+
+static const char pod_version_header[] = {
+ 0xf2, 0x7e, 0x7f, 0x06, 0x02
+};
+
+
+/* forward declarations: */
+static void pod_startup2(unsigned long data);
+static void pod_startup3(struct usb_line6_pod *pod);
+static void pod_startup4(struct usb_line6_pod *pod);
/*
@@ -129,60 +146,6 @@
set_bit(i, pod->param_dirty);
}
-/*
- Send an asynchronous request for the POD firmware version and device ID.
-*/
-static int pod_version_request_async(struct usb_line6_pod *pod)
-{
- return line6_send_raw_message_async(&pod->line6, pod->buffer_versionreq, sizeof(pod_request_version));
-}
-
-static void pod_create_files_work(struct work_struct *work)
-{
- struct usb_line6_pod *pod = container_of(work, struct usb_line6_pod, create_files_work);
-
- pod_create_files(pod->firmware_version, pod->line6.properties->device_bit, pod->line6.ifcdev);
-}
-
-static void pod_startup_timeout(unsigned long arg)
-{
- enum {
- REQUEST_NONE,
- REQUEST_DUMP,
- REQUEST_VERSION
- };
-
- int request = REQUEST_NONE;
- struct usb_line6_pod *pod = (struct usb_line6_pod *)arg;
-
- if (pod->dumpreq.ok) {
- if (!pod->versionreq_ok)
- request = REQUEST_VERSION;
- } else {
- if (pod->versionreq_ok)
- request = REQUEST_DUMP;
- else if (pod->startup_count++ & 1)
- request = REQUEST_DUMP;
- else
- request = REQUEST_VERSION;
- }
-
- switch (request) {
- case REQUEST_DUMP:
- line6_dump_request_async(&pod->dumpreq, &pod->line6, 0);
- break;
-
- case REQUEST_VERSION:
- pod_version_request_async(pod);
- break;
-
- default:
- return;
- }
-
- line6_startup_delayed(&pod->dumpreq, 1, pod_startup_timeout, pod);
-}
-
static char *pod_alloc_sysex_buffer(struct usb_line6_pod *pod, int code, int size)
{
return line6_alloc_sysex_buffer(&pod->line6, POD_SYSEX_CODE, code, size);
@@ -218,7 +181,7 @@
}
/*
- Handle SAVE button
+ Handle SAVE button.
*/
static void pod_save_button_pressed(struct usb_line6_pod *pod, int type, int index)
{
@@ -229,7 +192,7 @@
/*
Process a completely received message.
*/
-void pod_process_message(struct usb_line6_pod *pod)
+void line6_pod_process_message(struct usb_line6_pod *pod)
{
const unsigned char *buf = pod->line6.buffer_message;
@@ -254,7 +217,7 @@
if ((buf[1] == POD_amp_model_setup) ||
(buf[1] == POD_effect_setup))
/* these also affect other settings */
- line6_dump_request_async(&pod->dumpreq, &pod->line6, 0);
+ line6_dump_request_async(&pod->dumpreq, &pod->line6, 0, LINE6_DUMP_CURRENT);
break;
@@ -263,7 +226,7 @@
pod->channel_num = buf[1];
pod->dirty = 0;
set_bit(POD_CHANNEL_DIRTY, &pod->atomic_flags);
- line6_dump_request_async(&pod->dumpreq, &pod->line6, 0);
+ line6_dump_request_async(&pod->dumpreq, &pod->line6, 0, LINE6_DUMP_CURRENT);
break;
case LINE6_SYSEX_BEGIN | LINE6_CHANNEL_DEVICE:
@@ -276,7 +239,6 @@
case LINE6_DUMP_CURRENT:
memcpy(&pod->prog_data, buf + 7, sizeof(pod->prog_data));
pod_mark_batch_all_dirty(pod);
- pod->dumpreq.ok = 1;
break;
case POD_DUMP_MEMORY:
@@ -288,6 +250,7 @@
}
line6_dump_finished(&pod->dumpreq);
+ pod_startup3(pod);
} else
DEBUG_MESSAGES(dev_err(pod->line6.ifcdev, "wrong size of channel dump message (%d instead of %d)\n",
pod->line6.message_length, (int)sizeof(pod->prog_data) + 7));
@@ -300,7 +263,7 @@
#define PROCESS_SYSTEM_PARAM(x) \
case POD_ ## x: \
pod->x.value = value; \
- wake_up_interruptible(&pod->x.wait); \
+ wake_up(&pod->x.wait); \
break;
switch (buf[6]) {
@@ -331,7 +294,7 @@
case POD_SYSEX_CLIP:
DEBUG_MESSAGES(dev_err(pod->line6.ifcdev, "audio clipped\n"));
pod->clipping.value = 1;
- wake_up_interruptible(&pod->clipping.wait);
+ wake_up(&pod->clipping.wait);
break;
case POD_SYSEX_STORE:
@@ -342,17 +305,9 @@
DEBUG_MESSAGES(dev_err(pod->line6.ifcdev, "unknown sysex message %02X\n", buf[5]));
}
} else if (memcmp(buf, pod_version_header, sizeof(pod_version_header)) == 0) {
- if (pod->versionreq_ok == 0) {
- pod->firmware_version = buf[13] * 100 + buf[14] * 10 + buf[15];
- pod->device_id = ((int)buf[8] << 16) | ((int)buf[9] << 8) | (int)buf[10];
- pod->versionreq_ok = 1;
-
- /* Now we know the firmware version, so we schedule a bottom half
- handler to create the special files: */
- INIT_WORK(&pod->create_files_work, pod_create_files_work);
- queue_work(line6_workqueue, &pod->create_files_work);
- } else
- DEBUG_MESSAGES(dev_err(pod->line6.ifcdev, "multiple firmware version message\n"));
+ pod->firmware_version = buf[13] * 100 + buf[14] * 10 + buf[15];
+ pod->device_id = ((int)buf[8] << 16) | ((int)buf[9] << 8) | (int)buf[10];
+ pod_startup4(pod);
} else
DEBUG_MESSAGES(dev_err(pod->line6.ifcdev, "unknown sysex header\n"));
@@ -377,7 +332,7 @@
*) This method fails if a param change message is "chopped" after the first
byte.
*/
-void pod_midi_postprocess(struct usb_line6_pod *pod, unsigned char *data, int length)
+void line6_pod_midi_postprocess(struct usb_line6_pod *pod, unsigned char *data, int length)
{
int i;
@@ -412,7 +367,7 @@
/*
Transmit PODxt Pro control parameter.
*/
-void pod_transmit_parameter(struct usb_line6_pod *pod, int param, int value)
+void line6_pod_transmit_parameter(struct usb_line6_pod *pod, int param, int value)
{
if (line6_transmit_parameter(&pod->line6, param, value) == 0)
pod_store_parameter(pod, param, value);
@@ -511,7 +466,7 @@
char *p2;
char *last_non_space = buf;
- int retval = line6_wait_dump(&pod->dumpreq, 0);
+ int retval = line6_dump_wait_interruptible(&pod->dumpreq);
if (retval < 0)
return retval;
@@ -588,7 +543,7 @@
{
struct usb_interface *interface = to_usb_interface(dev);
struct usb_line6_pod *pod = usb_get_intfdata(interface);
- int retval = line6_wait_dump(&pod->dumpreq, 0);
+ int retval = line6_dump_wait_interruptible(&pod->dumpreq);
if (retval < 0)
return retval;
memcpy(buf, &pod->prog_data, sizeof(pod->prog_data));
@@ -606,8 +561,8 @@
if (count != sizeof(pod->prog_data)) {
dev_err(pod->line6.ifcdev,
- "data block must be exactly %zu bytes\n",
- sizeof(pod->prog_data));
+ "data block must be exactly %d bytes\n",
+ (int)sizeof(pod->prog_data));
return -EINVAL;
}
@@ -616,78 +571,88 @@
}
/*
- Request system parameter.
+ Identify system parameters related to the tuner.
+*/
+static bool pod_is_tuner(int code)
+{
+ return
+ (code == POD_tuner_mute) ||
+ (code == POD_tuner_freq) ||
+ (code == POD_tuner_note) ||
+ (code == POD_tuner_pitch);
+}
+
+/*
+ Get system parameter (as integer).
@param tuner non-zero, if code refers to a tuner parameter
*/
-static ssize_t pod_get_system_param(struct usb_line6_pod *pod, char *buf, int code, struct ValueWait *param, int tuner, int sign)
+static int pod_get_system_param_int(struct usb_line6_pod *pod, int *value, int code,
+ struct ValueWait *param, int sign)
{
char *sysex;
- int value;
static const int size = 1;
int retval = 0;
- DECLARE_WAITQUEUE(wait, current);
- if (((pod->prog_data.control[POD_tuner] & 0x40) == 0) && tuner)
+ if (((pod->prog_data.control[POD_tuner] & 0x40) == 0) && pod_is_tuner(code))
return -ENODEV;
- /* send value request to tuner: */
+ /* send value request to device: */
param->value = POD_system_invalid;
sysex = pod_alloc_sysex_buffer(pod, POD_SYSEX_SYSTEMREQ, size);
+
if (!sysex)
- return 0;
+ return -ENOMEM;
+
sysex[SYSEX_DATA_OFS] = code;
line6_send_sysex_message(&pod->line6, sysex, size);
kfree(sysex);
- /* wait for tuner to respond: */
- add_wait_queue(¶m->wait, &wait);
- current->state = TASK_INTERRUPTIBLE;
-
- while (param->value == POD_system_invalid) {
- if (signal_pending(current)) {
- retval = -ERESTARTSYS;
- break;
- } else
- schedule();
- }
-
- current->state = TASK_RUNNING;
- remove_wait_queue(¶m->wait, &wait);
+ /* wait for device to respond: */
+ retval = wait_event_interruptible(param->wait, param->value != POD_system_invalid);
if (retval < 0)
return retval;
- value = sign ? (int)(signed short)param->value : (int)(unsigned short)param->value;
+ *value = sign ? (int)(signed short)param->value : (int)(unsigned short)param->value;
+
+ if(*value == POD_system_invalid)
+ *value = 0; /* don't report uninitialized values */
+
+ return 0;
+}
+
+/*
+ Get system parameter (as string).
+ @param tuner non-zero, if code refers to a tuner parameter
+*/
+static ssize_t pod_get_system_param_string(struct usb_line6_pod *pod, char *buf, int code,
+ struct ValueWait *param, int sign)
+{
+ int retval, value = 0;
+ retval = pod_get_system_param_int(pod, &value, code, param, sign);
+
+ if(retval < 0)
+ return retval;
+
return sprintf(buf, "%d\n", value);
}
/*
- Send system parameter.
+ Send system parameter (from integer).
@param tuner non-zero, if code refers to a tuner parameter
*/
-static ssize_t pod_set_system_param(struct usb_line6_pod *pod, const char *buf,
- int count, int code, unsigned short mask,
- int tuner)
+static int pod_set_system_param_int(struct usb_line6_pod *pod, int value, int code)
{
char *sysex;
static const int size = 5;
- unsigned short value;
- unsigned long result;
- int ret;
- if (((pod->prog_data.control[POD_tuner] & 0x40) == 0) && tuner)
+ if (((pod->prog_data.control[POD_tuner] & 0x40) == 0) && pod_is_tuner(code))
return -EINVAL;
/* send value to tuner: */
sysex = pod_alloc_sysex_buffer(pod, POD_SYSEX_SYSTEM, size);
if (!sysex)
- return 0;
-
- ret = strict_strtoul(buf, 10, &result);
- if (ret)
- return ret;
-
- value = result & mask;
+ return -ENOMEM;
sysex[SYSEX_DATA_OFS] = code;
sysex[SYSEX_DATA_OFS + 1] = (value >> 12) & 0x0f;
sysex[SYSEX_DATA_OFS + 2] = (value >> 8) & 0x0f;
@@ -695,7 +660,20 @@
sysex[SYSEX_DATA_OFS + 4] = (value ) & 0x0f;
line6_send_sysex_message(&pod->line6, sysex, size);
kfree(sysex);
- return count;
+ return 0;
+}
+
+/*
+ Send system parameter (from string).
+ @param tuner non-zero, if code refers to a tuner parameter
+*/
+static ssize_t pod_set_system_param_string(struct usb_line6_pod *pod, const char *buf,
+ int count, int code, unsigned short mask)
+{
+ int retval;
+ unsigned short value = simple_strtoul(buf, NULL, 10) & mask;
+ retval = pod_set_system_param_int(pod, value, code);
+ return (retval < 0) ? retval : count;
}
/*
@@ -706,7 +684,7 @@
{
struct usb_interface *interface = to_usb_interface(dev);
struct usb_line6_pod *pod = usb_get_intfdata(interface);
- int retval = line6_wait_dump(&pod->dumpreq, 0);
+ int retval = line6_dump_wait_interruptible(&pod->dumpreq);
if (retval < 0)
return retval;
memcpy(buf, &pod->prog_data_buf, sizeof(pod->prog_data_buf));
@@ -725,8 +703,8 @@
if (count != sizeof(pod->prog_data)) {
dev_err(pod->line6.ifcdev,
- "data block must be exactly %zu bytes\n",
- sizeof(pod->prog_data));
+ "data block must be exactly %d bytes\n",
+ (int)sizeof(pod->prog_data));
return -EINVAL;
}
@@ -900,53 +878,94 @@
{
struct usb_interface *interface = to_usb_interface(dev);
struct usb_line6_pod *pod = usb_get_intfdata(interface);
- int err = 0;
- DECLARE_WAITQUEUE(wait, current);
- pod->clipping.value = 0;
- add_wait_queue(&pod->clipping.wait, &wait);
- current->state = TASK_INTERRUPTIBLE;
-
- while (pod->clipping.value == 0) {
- if (signal_pending(current)) {
- err = -ERESTARTSYS;
- break;
- } else
- schedule();
- }
-
- current->state = TASK_RUNNING;
- remove_wait_queue(&pod->clipping.wait, &wait);
- return err;
+ return wait_event_interruptible(pod->clipping.wait, pod->clipping.value != 0);
}
-#define POD_GET_SYSTEM_PARAM(code, tuner, sign) \
+/*
+ POD startup procedure.
+ This is a sequence of functions with special requirements (e.g., must
+ not run immediately after initialization, must not run in interrupt
+ context). After the last one has finished, the device is ready to use.
+*/
+
+static void pod_startup1(struct usb_line6_pod *pod)
+{
+ CHECK_STARTUP_PROGRESS(pod->startup_progress, 1);
+
+ /* delay startup procedure: */
+ line6_start_timer(&pod->startup_timer, POD_STARTUP_DELAY, pod_startup2, (unsigned long)pod);
+}
+
+static void pod_startup2(unsigned long data)
+{
+ struct usb_line6_pod *pod = (struct usb_line6_pod *)data;
+ CHECK_STARTUP_PROGRESS(pod->startup_progress, 2);
+
+ /* current channel dump: */
+ line6_dump_request_async(&pod->dumpreq, &pod->line6, 0, LINE6_DUMP_CURRENT);
+}
+
+static void pod_startup3(struct usb_line6_pod *pod)
+{
+ struct usb_line6 *line6 = &pod->line6;
+ CHECK_STARTUP_PROGRESS(pod->startup_progress, 3);
+
+ /* request firmware version: */
+ line6_version_request_async(line6);
+}
+
+static void pod_startup4(struct usb_line6_pod *pod)
+{
+ CHECK_STARTUP_PROGRESS(pod->startup_progress, 4);
+
+ /* schedule work for global work queue: */
+ schedule_work(&pod->startup_work);
+}
+
+static void pod_startup5(struct work_struct *work)
+{
+ struct usb_line6_pod *pod = container_of(work, struct usb_line6_pod, startup_work);
+ struct usb_line6 *line6 = &pod->line6;
+
+ CHECK_STARTUP_PROGRESS(pod->startup_progress, 5);
+
+ /* serial number: */
+ line6_read_serial_number(&pod->line6, &pod->serial_number);
+
+ /* ALSA audio interface: */
+ line6_register_audio(line6);
+
+ /* device files: */
+ line6_pod_create_files(pod->firmware_version, line6->properties->device_bit, line6->ifcdev);
+}
+
+#define POD_GET_SYSTEM_PARAM(code, sign) \
static ssize_t pod_get_ ## code(struct device *dev, \
struct device_attribute *attr, char *buf) \
{ \
struct usb_interface *interface = to_usb_interface(dev); \
struct usb_line6_pod *pod = usb_get_intfdata(interface); \
- return pod_get_system_param(pod, buf, POD_ ## code, &pod->code, \
- tuner, sign); \
+ return pod_get_system_param_string(pod, buf, POD_ ## code, \
+ &pod->code, sign); \
}
-#define POD_GET_SET_SYSTEM_PARAM(code, mask, tuner, sign) \
-POD_GET_SYSTEM_PARAM(code, tuner, sign) \
+#define POD_GET_SET_SYSTEM_PARAM(code, mask, sign) \
+POD_GET_SYSTEM_PARAM(code, sign) \
static ssize_t pod_set_ ## code(struct device *dev, \
struct device_attribute *attr, \
const char *buf, size_t count) \
{ \
struct usb_interface *interface = to_usb_interface(dev); \
struct usb_line6_pod *pod = usb_get_intfdata(interface); \
- return pod_set_system_param(pod, buf, count, POD_ ## code, mask, \
- tuner); \
+ return pod_set_system_param_string(pod, buf, count, POD_ ## code, mask); \
}
-POD_GET_SET_SYSTEM_PARAM(monitor_level, 0xffff, 0, 0);
-POD_GET_SET_SYSTEM_PARAM(routing, 0x0003, 0, 0);
-POD_GET_SET_SYSTEM_PARAM(tuner_mute, 0x0001, 1, 0);
-POD_GET_SET_SYSTEM_PARAM(tuner_freq, 0xffff, 1, 0);
-POD_GET_SYSTEM_PARAM(tuner_note, 1, 1);
-POD_GET_SYSTEM_PARAM(tuner_pitch, 1, 1);
+POD_GET_SET_SYSTEM_PARAM(monitor_level, 0xffff, 0);
+POD_GET_SET_SYSTEM_PARAM(routing, 0x0003, 0);
+POD_GET_SET_SYSTEM_PARAM(tuner_mute, 0x0001, 0);
+POD_GET_SET_SYSTEM_PARAM(tuner_freq, 0xffff, 0);
+POD_GET_SYSTEM_PARAM(tuner_note, 1);
+POD_GET_SYSTEM_PARAM(tuner_pitch, 1);
#undef GET_SET_SYSTEM_PARAM
#undef GET_SYSTEM_PARAM
@@ -977,10 +996,57 @@
static DEVICE_ATTR(tuner_note, S_IRUGO, pod_get_tuner_note, line6_nop_write);
static DEVICE_ATTR(tuner_pitch, S_IRUGO, pod_get_tuner_pitch, line6_nop_write);
-#if CREATE_RAW_FILE
+#ifdef CONFIG_LINE6_USB_RAW
static DEVICE_ATTR(raw, S_IWUGO, line6_nop_read, line6_set_raw);
#endif
+/* control info callback */
+static int snd_pod_control_monitor_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+ uinfo->count = 1;
+ uinfo->value.integer.min = 0;
+ uinfo->value.integer.max = 65535;
+ return 0;
+}
+
+/* control get callback */
+static int snd_pod_control_monitor_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_line6_pcm *line6pcm = snd_kcontrol_chip(kcontrol);
+ struct usb_line6_pod *pod = (struct usb_line6_pod *)line6pcm->line6;
+ ucontrol->value.integer.value[0] = pod->monitor_level.value;
+ return 0;
+}
+
+/* control put callback */
+static int snd_pod_control_monitor_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_line6_pcm *line6pcm = snd_kcontrol_chip(kcontrol);
+ struct usb_line6_pod *pod = (struct usb_line6_pod *)line6pcm->line6;
+
+ if(ucontrol->value.integer.value[0] == pod->monitor_level.value)
+ return 0;
+
+ pod->monitor_level.value = ucontrol->value.integer.value[0];
+ pod_set_system_param_int(pod, ucontrol->value.integer.value[0], POD_monitor_level);
+ return 1;
+}
+
+/* control definition */
+static struct snd_kcontrol_new pod_control_monitor = {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Monitor Playback Volume",
+ .index = 0,
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+ .info = snd_pod_control_monitor_info,
+ .get = snd_pod_control_monitor_get,
+ .put = snd_pod_control_monitor_put
+};
+
/*
POD destructor.
*/
@@ -998,8 +1064,6 @@
/* free dump request data: */
line6_dumpreq_destruct(&pod->dumpreq);
-
- kfree(pod->buffer_versionreq);
}
/*
@@ -1034,7 +1098,7 @@
CHECK_RETURN(device_create_file(dev, &dev_attr_tuner_note));
CHECK_RETURN(device_create_file(dev, &dev_attr_tuner_pitch));
-#if CREATE_RAW_FILE
+#ifdef CONFIG_LINE6_USB_RAW
CHECK_RETURN(device_create_file(dev, &dev_attr_raw));
#endif
@@ -1042,9 +1106,9 @@
}
/*
- Init POD device.
+ Try to init POD device.
*/
-int pod_init(struct usb_interface *interface, struct usb_line6_pod *pod)
+static int pod_try_init(struct usb_interface *interface, struct usb_line6_pod *pod)
{
int err;
struct usb_line6 *line6 = &pod->line6;
@@ -1062,6 +1126,8 @@
init_waitqueue_head(&pod->tuner_note.wait);
init_waitqueue_head(&pod->tuner_pitch.wait);
init_waitqueue_head(&pod->clipping.wait);
+ init_timer(&pod->startup_timer);
+ INIT_WORK(&pod->startup_work, pod_startup5);
memset(pod->param_dirty, 0xff, sizeof(pod->param_dirty));
@@ -1070,69 +1136,73 @@
sizeof(pod_request_channel));
if (err < 0) {
dev_err(&interface->dev, "Out of memory\n");
- pod_destruct(interface);
- return -ENOMEM;
- }
-
- pod->buffer_versionreq = kmemdup(pod_request_version,
- sizeof(pod_request_version),
- GFP_KERNEL);
-
- if (pod->buffer_versionreq == NULL) {
- dev_err(&interface->dev, "Out of memory\n");
- pod_destruct(interface);
return -ENOMEM;
}
/* create sysfs entries: */
err = pod_create_files2(&interface->dev);
if (err < 0) {
- pod_destruct(interface);
return err;
}
/* initialize audio system: */
err = line6_init_audio(line6);
if (err < 0) {
- pod_destruct(interface);
return err;
}
/* initialize MIDI subsystem: */
err = line6_init_midi(line6);
if (err < 0) {
- pod_destruct(interface);
return err;
}
/* initialize PCM subsystem: */
err = line6_init_pcm(line6, &pod_pcm_properties);
if (err < 0) {
- pod_destruct(interface);
return err;
}
- /* register audio system: */
- err = line6_register_audio(line6);
+ /* register monitor control: */
+ err = snd_ctl_add(line6->card, snd_ctl_new1(&pod_control_monitor, line6->line6pcm));
if (err < 0) {
- pod_destruct(interface);
return err;
}
+ /*
+ When the sound card is registered at this point, the PODxt Live
+ displays "Invalid Code Error 07", so we do it later in the event
+ handler.
+ */
+
if (pod->line6.properties->capabilities & LINE6_BIT_CONTROL) {
- /* query some data: */
- line6_startup_delayed(&pod->dumpreq, POD_STARTUP_DELAY,
- pod_startup_timeout, pod);
- line6_read_serial_number(&pod->line6, &pod->serial_number);
+ pod->monitor_level.value = POD_system_invalid;
+
+ /* initiate startup procedure: */
+ pod_startup1(pod);
}
return 0;
}
/*
+ Init POD device (and clean up in case of failure).
+*/
+int line6_pod_init(struct usb_interface *interface, struct usb_line6_pod *pod)
+{
+ int err = pod_try_init(interface, pod);
+
+ if (err < 0) {
+ pod_destruct(interface);
+ }
+
+ return err;
+}
+
+/*
POD device disconnected.
*/
-void pod_disconnect(struct usb_interface *interface)
+void line6_pod_disconnect(struct usb_interface *interface)
{
struct usb_line6_pod *pod;
@@ -1145,14 +1215,12 @@
struct device *dev = &interface->dev;
if (line6pcm != NULL) {
- unlink_wait_clear_audio_out_urbs(line6pcm);
- unlink_wait_clear_audio_in_urbs(line6pcm);
+ line6_pcm_disconnect(line6pcm);
}
if (dev != NULL) {
/* remove sysfs entries: */
- if (pod->versionreq_ok)
- pod_remove_files(pod->firmware_version, pod->line6.properties->device_bit, dev);
+ line6_pod_remove_files(pod->firmware_version, pod->line6.properties->device_bit, dev);
device_remove_file(dev, &dev_attr_channel);
device_remove_file(dev, &dev_attr_clip);
@@ -1179,7 +1247,7 @@
device_remove_file(dev, &dev_attr_tuner_note);
device_remove_file(dev, &dev_attr_tuner_pitch);
-#if CREATE_RAW_FILE
+#ifdef CONFIG_LINE6_USB_RAW
device_remove_file(dev, &dev_attr_raw);
#endif
}