regulator: wm8350: Convert DCDCs to set_voltage_sel() and linear voltages
The WM8350 DCDCs have a simple linear mapping from selectors to voltages
so can be converted very simply to use the new infrastructure for a nice
reduction in code size.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
diff --git a/drivers/regulator/wm8350-regulator.c b/drivers/regulator/wm8350-regulator.c
index 12ecaec..a618284 100644
--- a/drivers/regulator/wm8350-regulator.c
+++ b/drivers/regulator/wm8350-regulator.c
@@ -359,60 +359,6 @@
}
EXPORT_SYMBOL_GPL(wm8350_isink_set_flash);
-static int wm8350_dcdc_set_voltage(struct regulator_dev *rdev, int min_uV,
- int max_uV, unsigned *selector)
-{
- struct wm8350 *wm8350 = rdev_get_drvdata(rdev);
- int volt_reg, dcdc = rdev_get_id(rdev), mV,
- min_mV = min_uV / 1000, max_mV = max_uV / 1000;
- u16 val;
-
- if (min_mV < 850 || min_mV > 4025)
- return -EINVAL;
- if (max_mV < 850 || max_mV > 4025)
- return -EINVAL;
-
- /* step size is 25mV */
- mV = (min_mV - 826) / 25;
- if (wm8350_dcdc_val_to_mvolts(mV) > max_mV)
- return -EINVAL;
- BUG_ON(wm8350_dcdc_val_to_mvolts(mV) < min_mV);
-
- switch (dcdc) {
- case WM8350_DCDC_1:
- volt_reg = WM8350_DCDC1_CONTROL;
- break;
- case WM8350_DCDC_3:
- volt_reg = WM8350_DCDC3_CONTROL;
- break;
- case WM8350_DCDC_4:
- volt_reg = WM8350_DCDC4_CONTROL;
- break;
- case WM8350_DCDC_6:
- volt_reg = WM8350_DCDC6_CONTROL;
- break;
- case WM8350_DCDC_2:
- case WM8350_DCDC_5:
- default:
- return -EINVAL;
- }
-
- *selector = mV;
-
- /* all DCDCs have same mV bits */
- val = wm8350_reg_read(wm8350, volt_reg) & ~WM8350_DC1_VSEL_MASK;
- wm8350_reg_write(wm8350, volt_reg, val | mV);
- return 0;
-}
-
-static int wm8350_dcdc_list_voltage(struct regulator_dev *rdev,
- unsigned selector)
-{
- if (selector > WM8350_DCDC_MAX_VSEL)
- return -EINVAL;
- return wm8350_dcdc_val_to_mvolts(selector) * 1000;
-}
-
static int wm8350_dcdc_set_suspend_voltage(struct regulator_dev *rdev, int uV)
{
struct wm8350 *wm8350 = rdev_get_drvdata(rdev);
@@ -1087,9 +1033,9 @@
}
static struct regulator_ops wm8350_dcdc_ops = {
- .set_voltage = wm8350_dcdc_set_voltage,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
- .list_voltage = wm8350_dcdc_list_voltage,
+ .list_voltage = regulator_list_voltage_linear,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
@@ -1140,6 +1086,8 @@
.irq = WM8350_IRQ_UV_DC1,
.type = REGULATOR_VOLTAGE,
.n_voltages = WM8350_DCDC_MAX_VSEL + 1,
+ .min_uV = 850000,
+ .uV_step = 25000,
.vsel_reg = WM8350_DCDC1_CONTROL,
.vsel_mask = WM8350_DC1_VSEL_MASK,
.enable_reg = WM8350_DCDC_LDO_REQUESTED,
@@ -1163,6 +1111,8 @@
.irq = WM8350_IRQ_UV_DC3,
.type = REGULATOR_VOLTAGE,
.n_voltages = WM8350_DCDC_MAX_VSEL + 1,
+ .min_uV = 850000,
+ .uV_step = 25000,
.vsel_reg = WM8350_DCDC3_CONTROL,
.vsel_mask = WM8350_DC3_VSEL_MASK,
.enable_reg = WM8350_DCDC_LDO_REQUESTED,
@@ -1199,6 +1149,8 @@
.irq = WM8350_IRQ_UV_DC6,
.type = REGULATOR_VOLTAGE,
.n_voltages = WM8350_DCDC_MAX_VSEL + 1,
+ .min_uV = 850000,
+ .uV_step = 25000,
.vsel_reg = WM8350_DCDC6_CONTROL,
.vsel_mask = WM8350_DC6_VSEL_MASK,
.enable_reg = WM8350_DCDC_LDO_REQUESTED,